Linus Svensson [Tue, 15 Jul 2014 14:06:49 +0000 (16:06 +0200)]
bus: gst_bus_add_watch() can return 0 on error
Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=735195
Thiago Santos [Mon, 25 Aug 2014 16:44:30 +0000 (13:44 -0300)]
baseparse: handle streamheaders by prepending them to the stream
Add a first_buffer boolean state flag to have baseparse do actions
before pushing data. This is used to check the caps for streamheader
buffers that are prepended to the stream, but only if the first buffer
isn't already marked with the _HEADER flag. In this case, it is assumed
that the _HEADER marked buffer is the same as the streamheader.
https://bugzilla.gnome.org/show_bug.cgi?id=735070
Sebastian Dröge [Wed, 27 Aug 2014 08:01:01 +0000 (11:01 +0300)]
concat: Allow seeking on the currently playing stream
This is consistent with the stream time reporting.
Tim-Philipp Müller [Sat, 23 Aug 2014 11:24:27 +0000 (12:24 +0100)]
pad: add g-i 'transfer full' annotations to chain and chain_list functions
https://bugzilla.gnome.org/show_bug.cgi?id=735210
Guillaume Desmottes [Fri, 22 Aug 2014 08:32:38 +0000 (10:32 +0200)]
pad: annotate GstPadEventFunction event with 'transfer full'
The callback is supposed to take ownership of the event so
best to be explicit about it.
https://bugzilla.gnome.org/show_bug.cgi?id=735210
Linus Svensson [Wed, 20 Aug 2014 10:55:51 +0000 (12:55 +0200)]
tests: add test that triggers deadlock in state change of queue
When receiving FLASH_STOP in a state transition to READY, a queue
element can end up with an active task that will never end.
https://bugzilla.gnome.org/show_bug.cgi?id=734688
Tim-Philipp Müller [Thu, 21 Aug 2014 13:02:16 +0000 (14:02 +0100)]
queue: fix race when flush-stop event comes in whilst shutting down
Don't re-start the queue push task on the source pad when a
flush-stop event comes in and we're in the process of shutting
down, otherwise that task will never be stopped again.
When the element is set to READY state, the pads get de-activated.
The source pad gets deactivated before the queue's own activate_mode
function on the source pads gets called (which will stop the thread),
so checking whether the pad is active before re-starting the task on
receiving flush-stop should be fine. The problem would happen when the
flush-stop handler was called just after the queue's activate mode
function had stopped the task.
Spotted and debugged by Linus Svensson <linux.svensson@axis.com>
https://bugzilla.gnome.org/show_bug.cgi?id=734688
Tim-Philipp Müller [Wed, 6 Aug 2014 13:01:09 +0000 (14:01 +0100)]
bytereader: add gst_byte_reader_peek_sub_reader() and _get_sub_reader()
Adds API to get or peek a sub-reader of a certain size from
a given byte reader. This is useful when parsing nested chunks,
one can easily get a byte reader for a sub-chunk and make
sure one never reads beyond the sub-chunk boundary.
API: gst_byte_reader_peek_sub_reader()
API: gst_byte_reader_get_sub_reader()
Aurélien Zanelli [Fri, 25 Jul 2014 14:39:40 +0000 (16:39 +0200)]
docs: make explicit that the caps passed to gst_base_src_set_caps() are 'tranfer none'
https://bugzilla.gnome.org/show_bug.cgi?id=733741
Thiago Santos [Thu, 14 Aug 2014 21:53:40 +0000 (18:53 -0300)]
inputselector: always proxy caps query
Otherwise it would only be proxied for the active pad which can lead
upstream to use an incompatible caps for the downstream element.
Even if a reconfigure event is sent upstream when the pad is activated, this
will save the caps reconfiguration if it is already using an acceptable caps.
Tim-Philipp Müller [Thu, 14 Aug 2014 13:37:56 +0000 (14:37 +0100)]
base: and fix build with new g-i again
Tim-Philipp Müller [Thu, 14 Aug 2014 13:25:06 +0000 (14:25 +0100)]
base: remove g-i annotation that makes older g-ir-scanner crash
Just remove one skip annotation that causes this:
** (g-ir-compiler:12458): ERROR **: Caught NULL node, parent=empty
with older g-i versions such as 1.32.1.
Philippe Normand [Wed, 13 Aug 2014 12:12:00 +0000 (14:12 +0200)]
bus: destroy signal watch from the context it was mapped to
Don't rely on g_source_remove() because it operates on the main
context. If a signal watch was added to a new thread-default context
g_source_remove() would have no effect. So simply use
g_source_destroy() to avoid this problem.
Additionally the source_id was removed from GstBusPrivate because it
was redundant with the signal watch GSource also stored in that
structure.
https://bugzilla.gnome.org/show_bug.cgi?id=734716
Thibault Saunier [Thu, 7 Aug 2014 10:18:04 +0000 (12:18 +0200)]
multiqueue: Not post BUFFERING message if one of the singlequeue doesn't need it
Imagine the following 'pipeline'
--------------
p1/| 'fullqueue' |--- 'laggy' downstream
--------- / | |
-| demuxer | | multiqueue |
--------- \ | |
p2\| 'emptyqueue' |--- 'fast' downstream
--------------
In the case downstream of one single queue (fullqueue) has (a lot of) latency
(for example for reverse playback with video), we can end up having the other
SingleQueue (emptyqueue) emptied, before that fullqueue gets
unblocked. In the meantime, the demuxer tries to push on fullqueue, and
is blocking there.
In that case the current code will post a BUFFERING message on the bus when
emptyqueue gets emptied, that leads to the application setting the pipeline state to
PAUSED. So now we end up in a situation where 'laggy downstream' is
prerolled and will not unblock anymore because the pipeline is set to
PAUSED, the fullequeue does not have a chance to be emptied and
the emptyqueue can not get filled anymore so no more BUFERRING message
will be posted and the pipeline is stucked in PAUSED for the eternity.
Making sure that we do not try to "buffer" if one of the single queue
does not need buffering, prevents this situtation from happening though it lets the
oportunity for buffering in all other cases.
That implements a new logic where we need all singlequeue to need
buffering for the multiqueue to actually state buffering is needed,
taking the maximum buffering of the single queue as the reference point.
https://bugzilla.gnome.org/show_bug.cgi?id=734412
Sebastian Dröge [Wed, 13 Aug 2014 10:01:23 +0000 (13:01 +0300)]
multiqueue: Only handle flow returns < EOS as errors, not e.g. flushing
Sebastian Dröge [Wed, 13 Aug 2014 09:40:37 +0000 (12:40 +0300)]
bin: Use allow-none instead of nullable until we depend on a new enough GI version
Sebastian Dröge [Wed, 13 Aug 2014 09:39:47 +0000 (12:39 +0300)]
bin: gst_bin_new() can accept NULL as name
Sebastian Dröge [Wed, 13 Aug 2014 09:37:08 +0000 (12:37 +0300)]
element: Clarify docs about gst_element_get_request_pad() and remove deprecation part
This function is not really pad or slow for the common case of requesting a
pad with the name of the template. It is only slower if you to name your pads
directly instead of letting the element handle it.
Also there's no reason to deprecate it in favor of a more complicated function
for the common case.
Sebastian Dröge [Wed, 13 Aug 2014 09:20:51 +0000 (12:20 +0300)]
queue2: Post errors if we receive EOS after downstream reported an error
There will be no further data flow that would allow us to propagate the
error upstream, causing nobody at all to post an error message.
Sebastian Dröge [Wed, 13 Aug 2014 09:15:03 +0000 (12:15 +0300)]
queue: Post errors when receiving EOS after downstream returned an error
There might be no further data flow that would allow us to propagate the
error upstream, causing nobody to post an error at all.
Sebastian Dröge [Wed, 13 Aug 2014 09:10:39 +0000 (12:10 +0300)]
multiqueue: Post errors ourselves if they are received after EOS
After EOS there will be no further buffer which could propagate the
error upstream, so nothing is going to post an error message and
the pipeline just idles around.
Arun Raghavan [Tue, 12 Aug 2014 14:33:06 +0000 (20:03 +0530)]
docs: Trivial pad documentation fix
Presumably a copy-pasto.
Sebastian Dröge [Fri, 8 Aug 2014 07:54:02 +0000 (09:54 +0200)]
concat: Add unit tests for concat element
Sebastian Dröge [Fri, 8 Aug 2014 07:13:50 +0000 (09:13 +0200)]
concat: Add documentation and integrate into documentation build
Sebastian Dröge [Thu, 7 Aug 2014 12:42:44 +0000 (14:42 +0200)]
concat: Add new element that concatenates multiple streams
https://bugzilla.gnome.org/show_bug.cgi?id=734470
Thiago Santos [Sat, 9 Aug 2014 13:57:56 +0000 (10:57 -0300)]
tests: caps: add check for caps with features intersection
Checks that a caps without features doesn't intersect with
one that has features
Tim-Philipp Müller [Thu, 7 Aug 2014 13:54:37 +0000 (14:54 +0100)]
examples: controller: fix typo in comments
Tim-Philipp Müller [Wed, 6 Aug 2014 12:58:22 +0000 (13:58 +0100)]
bytereader: use unchecked inline variant for get_remaining in more places
We've already done the g_return_*_if_fail (reader != NULL)
dance in those places, so no need to do it again.
Sebastian Dröge [Wed, 6 Aug 2014 12:43:08 +0000 (14:43 +0200)]
utils: Ghostpads can be request pads too but check if the pad has a template
Otherwise we dereference NULL in some cases and crash.
Sebastian Rasmussen [Wed, 6 Aug 2014 10:34:42 +0000 (12:34 +0200)]
tests: Add missing unrefs of objects after use
Unreffing the objects returned by gst_bin_get_by_name() and
gst_pipeline_get_use() were missing in several tests, so add these.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=734345
Sebastian Dröge [Wed, 6 Aug 2014 10:55:57 +0000 (12:55 +0200)]
utils: Fix unititialized variable compiler warning
Sebastian Rasmussen [Sun, 13 Jul 2014 13:31:08 +0000 (15:31 +0200)]
tests: Add test verifying gst_element_link_pads_full()
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=733119
Sebastian Rasmussen [Sun, 13 Jul 2014 13:28:32 +0000 (15:28 +0200)]
utils: Unref/release pads in error cases when linking pads
Previously gst_element_link_pads_full() forgot to unreference or release
request pads in several error cases. Also comments were added mentioning
why releasing is not necessary in some places.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=733119
Tiago Cesar Katcipis [Fri, 1 Aug 2014 20:27:39 +0000 (17:27 -0300)]
gstcheck: add docs for gst_check_setup_src_pad_by_name()
https://bugzilla.gnome.org/show_bug.cgi?id=734142
Edward Hervey [Thu, 31 Jul 2014 16:32:03 +0000 (18:32 +0200)]
Makefile: Add usage of build-checks step
Allows building checks without running them
Mohammed Sameer [Wed, 30 Jul 2014 12:46:22 +0000 (15:46 +0300)]
bufferpool: Add missing error checking to default_alloc_buffer()
default_alloc_buffer() calls gst_buffer_new_allocate() but does not check for
failed allocation.
This patch makes default_alloc_buffer() return an error (GST_FLOW_ERROR) if
buffer allocation fails.
https://bugzilla.gnome.org/show_bug.cgi?id=733974
Thiago Santos [Tue, 29 Jul 2014 17:21:33 +0000 (14:21 -0300)]
multiqueue: avoid using infinite buffers limit if finite is requested
If the current max-buffers limit it infinite and a finite value is
requested, switch to the MAX (requested, current-value) to set some
limit but not below what we know that we've needed so far.
https://bugzilla.gnome.org/show_bug.cgi?id=733637
https://bugzilla.gnome.org/show_bug.cgi?id=733837
Sebastian Rasmussen [Thu, 24 Jul 2014 20:02:58 +0000 (22:02 +0200)]
parse: Unref reference to enclosing bins
Previously all reference to enclosing bins of an element were leaked
when doing delaying setting a property.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=733697
Руслан Ижбулатов [Sun, 27 Jul 2014 02:37:08 +0000 (02:37 +0000)]
gst-launch: Support SIGINT (Ctrl+C) on W32
W32 has no SIGINT, but it does have SetConsoleCtrlHandler(), which sets up
a handler for Ctrl+C.
https://bugzilla.gnome.org/show_bug.cgi?id=733814
Руслан Ижбулатов [Sun, 27 Jul 2014 03:06:16 +0000 (03:06 +0000)]
poll: Prevent false-negative from WAKE_EVENT() on W32
SetEvent() seems to not call SetLastError(0) internally, so checking last
error after calling SetEvent() may return the error from an earlier W32 API
call. Fix this by calling SetlastError(0) explicitly.
Currently WAKE_EVENT() code is cramped into a macro and doesn't look to be
entirely correct. Particularly, it does not check the return value of
SetEvent(), only the thread-local W32 error value. It is likely that SetEvent()
actually just returns non-zero value, but the code mistakenly thinks that the
call has failed, because GetLastError() seems to indicate so.
https://bugzilla.gnome.org/show_bug.cgi?id=733805
Tim-Philipp Müller [Sat, 26 Jul 2014 13:42:54 +0000 (14:42 +0100)]
gst: include atomicqueue.h again in gst.h
It's a public header of gstreamer core, so #include <gst/gst.h>
should make the API available.
Tim-Philipp Müller [Fri, 25 Jul 2014 10:45:56 +0000 (11:45 +0100)]
typefindelement: remove prototype for function that no longer exists
Thiago Santos [Thu, 24 Jul 2014 17:39:11 +0000 (14:39 -0300)]
bytereader: add gst_byte_reader_masked_scan_uint32_peek
Adds gst_byte_reader_masked_scan_uint32_peek just like
GstAdapter has a _peek and non _peek version
Upgraded tests to check that the returned value is correct in the
_peek version
API: gst_byte_reader_masked_scan_uint32_peek
https://bugzilla.gnome.org/show_bug.cgi?id=728356
Tim-Philipp Müller [Thu, 26 Jun 2014 13:09:25 +0000 (14:09 +0100)]
bufferlist: pre-allocate buffer array in one go with the buffer list
We can now create and free a buffer list with one slice alloc/free
call in most cases, instead of one slice alloc/free for the list,
one slice alloc/free for the GArray, and one malloc/free for the
GArray array. In practice we know the max size of our buffer list
from the start, so can avoid reallocs.
https://bugzilla.gnome.org/show_bug.cgi?id=732284
Stefan Sauer [Wed, 23 Jul 2014 19:27:48 +0000 (21:27 +0200)]
private: allow internal access to the debug base-time
Moving the extern to the head lets us access this from other parts as well. This
is neeed in the tracer branch.
Arun Raghavan [Tue, 22 Jul 2014 18:45:17 +0000 (00:15 +0530)]
scripts: Use git pull --rebase
No point introducing redundant merge commits.
Thiago Santos [Mon, 21 Jul 2014 15:41:08 +0000 (12:41 -0300)]
Revert "tests: taglist: add basic test for taglists serialization"
This reverts commit
85d23d19b7de40541d63b0bc76d8b646c321af26.
There was already a gsttag.c tests file, this test has been merged
in it in the previous commit
Thiago Santos [Mon, 21 Jul 2014 15:40:47 +0000 (12:40 -0300)]
tests: tag: add the empty taglist serialization test
Adds the test to the appropriate and already existing file.
Thiago Santos [Mon, 14 Jul 2014 21:46:54 +0000 (18:46 -0300)]
tests: taglist: add basic test for taglists serialization
Make sure it works with empty taglists
Thiago Santos [Mon, 14 Jul 2014 21:25:50 +0000 (18:25 -0300)]
tests: gststructure: serialization of tag event structure
Adds a test that checks that the serialization of a tag event structure
works without problems
https://bugzilla.gnome.org/show_bug.cgi?id=733131
Thiago Santos [Mon, 14 Jul 2014 21:23:43 +0000 (18:23 -0300)]
gstvalue: add GstTagList compare function
When serializing GstStructures from events in GDP it will add a taglist
as a GstStructure field, having the compare function allows comparison of
GstStructures to check if the serialized/deserialized version matches the
original one, among other cases.
https://bugzilla.gnome.org/show_bug.cgi?id=733131
Srimanta Panda [Wed, 9 Jul 2014 13:48:10 +0000 (15:48 +0200)]
funnel: Fix for racy EOS event handling
When eos events are forwarded simultaneouly from two sinkpads on
funnel, it doesnot forward the eos to sourcepad. The reason is
sticky events are stored after the event callbacks are returned.
Therefore while one is about to store the sticky events on the its
sinkpad, other sinkpad starts checking for the eos events on all other
sinkpads and assumes eos is not present yet.
https://bugzilla.gnome.org/show_bug.cgi?id=732851
Sebastian Dröge [Thu, 17 Jul 2014 14:05:00 +0000 (16:05 +0200)]
pipeline: Add unit test for resetting of the start time
Also check if this properly affects basesink elements to not
report the old start time but the real current position when
setting to PAUSED again.
Sebastian Dröge [Tue, 15 Jul 2014 16:19:24 +0000 (18:19 +0200)]
pipeline: Reset the start time when going from PAUSED to READY too
Sebastian Dröge [Tue, 15 Jul 2014 15:19:10 +0000 (17:19 +0200)]
pipeline: Reset start time in READY->PAUSED before chaining up
Otherwise bin will change the state of the child elements without
distributing the new start time.
Tim-Philipp Müller [Sat, 28 Jun 2014 16:58:26 +0000 (17:58 +0100)]
elements: improve buffer flags to string utility function
Avoid relocations and refactor so that we don't calculate
the fixed and known at compile time maximum string size
every time. Also skip the mini object flags which we are
not going to print anyway.
Sebastian Dröge [Sat, 19 Jul 2014 16:04:31 +0000 (18:04 +0200)]
Back to development
Sebastian Dröge [Sat, 19 Jul 2014 14:46:41 +0000 (16:46 +0200)]
Release 1.4.0
Sebastian Dröge [Sat, 19 Jul 2014 14:21:20 +0000 (16:21 +0200)]
Update .po files
Sebastian Dröge [Sat, 19 Jul 2014 10:16:58 +0000 (12:16 +0200)]
po: Update translations
Thibault Saunier [Thu, 17 Jul 2014 13:53:53 +0000 (15:53 +0200)]
baseparse: Return FLOW_FLUSHING when pushing a frame on a pad that has been flushed
When going to READY, it is possible that we are still pusing a frame but that
our srcpad has already been set to flushing. In that case we should not
post any error on the bus but instead cleanly return FLOW_FLUSHING.
https://bugzilla.gnome.org/show_bug.cgi?id=733320
Edward Hervey [Thu, 17 Jul 2014 05:07:36 +0000 (07:07 +0200)]
typefindelement: Propagate input buffer PTS and DTS
The initial buffers (that were used for timestamping) might have PTS
and DTS set. In order to forward those properly, get the initial
PTS/DTS from the adapter and set them on the reconstructed output
buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=733291
Sebastian Rasmussen [Sat, 12 Jul 2014 15:01:23 +0000 (17:01 +0200)]
debugutils: Unref pad template after use
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=733121
Thiago Santos [Mon, 14 Jul 2014 21:10:45 +0000 (18:10 -0300)]
gst: init taglist gtype to use it in gstvalue
Otherwise it will have a 0 value and GstTagList won't be found
for GstValue functions (serialization/deserialization)
https://bugzilla.gnome.org/show_bug.cgi?id=733131
Sebastian Dröge [Fri, 11 Jul 2014 08:46:01 +0000 (10:46 +0200)]
Release 1.3.91
Sebastian Dröge [Fri, 11 Jul 2014 08:41:20 +0000 (10:41 +0200)]
Update .po files
Sebastian Dröge [Fri, 11 Jul 2014 06:51:08 +0000 (08:51 +0200)]
po: Update translations
Sebastian Rasmussen [Sat, 5 Jul 2014 16:29:29 +0000 (18:29 +0200)]
docs: Fix documentation typos and inconsistencies
* GstGlobalDeviceMonitor was renamed to GstDeviceMonitor
* Expand GST_MESSAGE_DEVICE to the full enum value names
* Correct the incorrect references to the GstDeviceProvider interfaces
* Describe caps arguments for gstcheck interface
* Add missing docs for GstNetAddressMeta and its add function
* Add docs for toc helper macros
* Avoid refering to GstValueList type as done elsewhere
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=732786
Sebastian Rasmussen [Sat, 5 Jul 2014 15:13:21 +0000 (17:13 +0200)]
docs: Cleanup interface references in docs
* Delete references to removed interfaces
* Add missing documentation sections
* Fix duplicate interface references for GstDevice
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=732786
Sebastian Dröge [Tue, 8 Jul 2014 09:17:41 +0000 (11:17 +0200)]
docs: There is no decodebin2 anymore, don't pretend otherwise
Thiago Santos [Mon, 7 Jul 2014 19:14:32 +0000 (16:14 -0300)]
fdsrc: fix error setting when uri is invalid
Elements should always set the GError
Tim-Philipp Müller [Sun, 6 Jul 2014 11:13:04 +0000 (12:13 +0100)]
libs: gstcheck: check that mutex is locked before g_cond_wait*() is called
Sanity check to catch problems in unit test.
Tim-Philipp Müller [Sun, 6 Jul 2014 11:12:20 +0000 (12:12 +0100)]
libs: gstcheck: init and clear global mutex and cond variables
Tim-Philipp Müller [Sun, 6 Jul 2014 11:09:31 +0000 (12:09 +0100)]
tests: fix locking in gstpoll unit test
The mutex needs to be locked when g_cond_wait*() is
called.
Matthieu Bouron [Sat, 5 Jul 2014 15:24:18 +0000 (16:24 +0100)]
gst-uninstalled: add video and base library paths from -bad
https://bugzilla.gnome.org/show_bug.cgi?id=732770
Tim-Philipp Müller [Fri, 4 Jul 2014 18:40:28 +0000 (19:40 +0100)]
tools: suppress GLib warnings when gst-inspecting deprecated properties
GLib in git will spew a g_warning() when a property marked as
deprecated via param spec flags is accessed. Suppress this by
setting the appropriate environment variable.
Sebastian Dröge [Thu, 3 Jul 2014 08:11:02 +0000 (10:11 +0200)]
message: Work around g-i/pygobject/gjs bug with ~0 in enums
GST_MESSAGE_ANY was considered a long by pygobject and gjs, and thus
couldn't be used in gst_bus_poll() and similar APIs as they expect an
int-typed enum.
Just use 0xffffffff instead for now.
https://bugzilla.gnome.org/show_bug.cgi?id=732633
Tim-Philipp Müller [Wed, 2 Jul 2014 07:41:18 +0000 (08:41 +0100)]
tests: don't use post-GLib 2.32 API in bufferlist test
g_ptr_array_insert() is GLib >= 2.40
Göran Jönsson [Tue, 1 Jul 2014 10:22:56 +0000 (12:22 +0200)]
pad: Don't unlock while iterating over all sticky events for removal
Otherwise we might end up getting the event removed from elsewhere
at the same time while we're unlocked for g_object_notify().
https://bugzilla.gnome.org/show_bug.cgi?id=732556
Sebastian Dröge [Tue, 1 Jul 2014 17:17:11 +0000 (19:17 +0200)]
identity: Proxy the accept-caps query
We always work in passthrough mode so there's no point in doing
something more clever in basetransform. Also the basetransform
code leads to problems with incomplete caps and downstream
elements that use GST_PAD_FLAG_ACCEPT_INTERSECT.
https://bugzilla.gnome.org/show_bug.cgi?id=732559
Vincent Penquerc'h [Tue, 1 Jul 2014 10:21:53 +0000 (11:21 +0100)]
basesink: reset QoS on segment event
This avoids spurious warnings about slow machine when upstream
sends new segments without flushing.
Evan Nemerson [Tue, 1 Jul 2014 06:39:18 +0000 (23:39 -0700)]
introspection: Assorted minor introspection and documentation fixes
https://bugzilla.gnome.org/show_bug.cgi?id=732534
Guillaume Desmottes [Mon, 30 Jun 2014 08:59:18 +0000 (08:59 +0000)]
devicemonitor: Stop using g_clear_pointer()
We dont't want to depend on GLib 2.34 for now.
Sebastian Dröge [Sun, 29 Jun 2014 17:16:05 +0000 (19:16 +0200)]
sparsefile: Initialize memory in unit test to make valgrind happy
We were writing unitialized stack memory to the file.
Sebastian Dröge [Sat, 28 Jun 2014 08:45:18 +0000 (10:45 +0200)]
Release 1.3.90
Sebastian Dröge [Sat, 28 Jun 2014 08:41:48 +0000 (10:41 +0200)]
Update .po files
Tim-Philipp Müller [Fri, 27 Jun 2014 09:44:32 +0000 (10:44 +0100)]
devicemonitor: don't fail when started without any filters
Just show all devices then.
Tim-Philipp Müller [Fri, 27 Jun 2014 09:44:01 +0000 (10:44 +0100)]
deviceproviderfactory: handle NULL classes argument and match any
Olivier Crête [Fri, 27 Jun 2014 01:00:40 +0000 (21:00 -0400)]
device: Add unit tests
Olivier Crête [Thu, 26 Jun 2014 21:22:25 +0000 (17:22 -0400)]
devicemonitor: Improve documentation
Olivier Crête [Thu, 26 Jun 2014 21:13:12 +0000 (17:13 -0400)]
devicemonitor: Make it possible to add multiple filters
Each filter will include a GstCaps and a set of classes to match
Olivier Crête [Thu, 26 Jun 2014 20:31:51 +0000 (16:31 -0400)]
device: Add pre-conditions
Olivier Crête [Thu, 26 Jun 2014 19:08:46 +0000 (15:08 -0400)]
GstDeviceMonitor: Rename from GstGlobalDeviceMonitor
Olivier Crête [Thu, 26 Jun 2014 18:28:09 +0000 (14:28 -0400)]
DeviceProvider: Rename from DeviceMonitor
Sebastian Dröge [Thu, 26 Jun 2014 17:31:33 +0000 (19:31 +0200)]
dataqueue: Hide from bindings
Other languages have their own data structures that are more convenient to
use.
https://bugzilla.gnome.org/show_bug.cgi?id=731303
Sebastian Dröge [Thu, 26 Jun 2014 17:30:52 +0000 (19:30 +0200)]
queuearray: Hide from bindings
Other languages have their own data structures that are more convenient to use.
https://bugzilla.gnome.org/show_bug.cgi?id=731350
Philip Withnall [Wed, 28 May 2014 09:14:45 +0000 (10:14 +0100)]
miniobject: Add missing (nullable) annotations
gst_mini_object_replace() can take NULL mini-objects.
https://bugzilla.gnome.org/show_bug.cgi?id=730873
Sebastian Dröge [Thu, 26 Jun 2014 17:02:06 +0000 (19:02 +0200)]
message: Application and element messages should not have NULL structures
It does not make sense for them.
Evan Nemerson [Wed, 11 Jun 2014 23:19:01 +0000 (16:19 -0700)]
introspection: add some missing allow-none annotations to in params
https://bugzilla.gnome.org/show_bug.cgi?id=730957
Evan Nemerson [Wed, 11 Jun 2014 23:06:19 +0000 (16:06 -0700)]
introspection: add nullability annotations to out and inout params
https://bugzilla.gnome.org/show_bug.cgi?id=730957