Dmitry Baryshkov [Sat, 24 Sep 2022 09:01:02 +0000 (12:01 +0300)]
arm64: dts: qcom: msm8916: change DSI PHY node name to generic one
Change DSI PHY node names from custom 'dsi-phy' to the generic 'phy'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924090108.166934-4-dmitry.baryshkov@linaro.org
Johan Hovold [Wed, 21 Sep 2022 08:00:50 +0000 (10:00 +0200)]
arm64: dts: qcom: sc8280xp: add rpmh-stats node
Add a node describing the RPMh shared memory that can be used to
retrieve statistics for the SoC low-power modes.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220921080050.21383-1-johan+linaro@kernel.org
Konrad Dybcio [Wed, 21 Sep 2022 00:47:41 +0000 (02:47 +0200)]
arm64: dts: qcom: msm8998-yoshino: Fix up SMD regulators formatting
Add a new line between each subnode and make the { } consistent.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220921004741.152765-1-konrad.dybcio@somainline.org
Dmitry Baryshkov [Mon, 19 Sep 2022 19:00:37 +0000 (22:00 +0300)]
arm64: dts: qcom: nile: correct firmware paths
Correct firmware paths for the Sony Xperia Nile devices to include the
SoC name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919190037.2122284-7-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Mon, 19 Sep 2022 19:00:36 +0000 (22:00 +0300)]
arm64: dts: qcom: pdx223: correct firmware paths
Correct firmware paths for the Sony Xperia 1 IV to include the SoC name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919190037.2122284-6-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Mon, 19 Sep 2022 19:00:35 +0000 (22:00 +0300)]
arm64: dts: qcom: sagami: correct firmware paths
Correct firmware paths for the Sony Xperia Sagami devices to include the
SoC name, vendor and platform names.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919190037.2122284-5-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Mon, 19 Sep 2022 19:00:34 +0000 (22:00 +0300)]
arm64: dts: qcom: ifc6560: correct firmware paths
Correct firmware paths for the Inforce IFC6560 to include the SoC name.
Do not include the platform name, since the board uses test-signed
firmware.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919190037.2122284-4-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Mon, 19 Sep 2022 19:00:33 +0000 (22:00 +0300)]
arm64: dts: qcom: miix-630: correct firmware paths
Correct firmware paths for the Lenovo Miix 630 to include the SoC name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919190037.2122284-3-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Mon, 19 Sep 2022 19:00:32 +0000 (22:00 +0300)]
arm64: dts: qcom: w737: correct firmware paths
Correct firmware paths for the Samsung Galaxy Book2 to include the SoC
name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919190037.2122284-2-dmitry.baryshkov@linaro.org
Joel Selvaraj [Fri, 9 Sep 2022 03:54:47 +0000 (22:54 -0500)]
arm64: dts: qcom: sdm845-xiaomi-beryllium-ebbg: introduce Xiaomi Poco F1 EBBG variant
Introduce support for the Xiaomi Poco F1 EBBG variant. The EBBG variant
uses EBBG FT8719 panel manufactured by EBBG.
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220909035447.36674-4-joelselvaraj.oss@gmail.com
Joel Selvaraj [Fri, 9 Sep 2022 03:54:46 +0000 (22:54 -0500)]
dt-bindings: arm: qcom: Add Xiaomi Poco F1 EBBG variant bindings
Add documentation for "xiaomi,beryllium-ebbg" device.
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220909035447.36674-3-joelselvaraj.oss@gmail.com
Joel Selvaraj [Fri, 9 Sep 2022 03:54:45 +0000 (22:54 -0500)]
arm64: dts: qcom: split beryllium dts into common dtsi and tianma dts
There are two panel variants of Xiaomi Poco F1. Tianma and EBBG panel.
The previous beryllium dts supported the Tianma variant. In order to
add support for EBBG variant, the common nodes from beryllium dts are
moved to a new common dtsi and to make the variants distinguishable,
sdm845-xiaomi-beryllium.dts is now named as
sdm845-xiaomi-beryllium-tianma.dts. The model property is updated to
distinguish between the variants. The compatibility property is
moved to the tianma variant, but it is not updated to avoid any
further conflict with other projects/users that might depend on it.
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220909035447.36674-2-joelselvaraj.oss@gmail.com
Dmitry Baryshkov [Thu, 8 Sep 2022 22:28:50 +0000 (01:28 +0300)]
arm64: dts: qcom: sm8450: add display clock controller
Add device node for display clock controller on Qualcomm SM8450 platform
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220908222850.3552050-5-dmitry.baryshkov@linaro.org
Krzysztof Kozlowski [Thu, 8 Sep 2022 08:09:37 +0000 (10:09 +0200)]
arm64: dts: qcom: use generic node name "gpio" in SPMI PMIC
GPIO controller nodes are named by convention just "gpio", not "gpios".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220908080938.29199-2-krzysztof.kozlowski@linaro.org
Rajeev Nandan [Wed, 7 Sep 2022 11:35:53 +0000 (17:05 +0530)]
arm64: dts: qcom: sc7280: assign DSI clock source parents
Assign DSI clock source parents to DSI PHY clocks.
Signed-off-by: Rajeev Nandan <quic_rajeevny@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1662550553-28933-1-git-send-email-quic_rajeevny@quicinc.com
Bryan O'Donoghue [Wed, 7 Sep 2022 00:01:05 +0000 (01:01 +0100)]
arm64: dts: qcom: sm8250: Drop redundant phy-names from DSI controller
phy-names has been marked deprecated. Remove it from the sm8250 DSI
controller block.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220907000105.786265-12-bryan.odonoghue@linaro.org
Bryan O'Donoghue [Wed, 7 Sep 2022 00:01:04 +0000 (01:01 +0100)]
arm64: dts: qcom: sdm845: Drop redundant phy-names from DSI controller
phy-names has been marked deprecated. Remove it from the sdm845 DSI
controller block.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220907000105.786265-11-bryan.odonoghue@linaro.org
Bryan O'Donoghue [Wed, 7 Sep 2022 00:01:03 +0000 (01:01 +0100)]
arm64: dts: qcom: sdm630: Drop redundant phy-names from DSI controller
phy-names has been marked deprecated. Remove it from the sdm630 DSI
controller block.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220907000105.786265-10-bryan.odonoghue@linaro.org
Bryan O'Donoghue [Wed, 7 Sep 2022 00:01:02 +0000 (01:01 +0100)]
arm64: dts: qcom: sdm660: Drop redundant phy-names from DSI controller
phy-names has been marked deprecated. Remove it from the sdm660 DSI
controller block.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220907000105.786265-9-bryan.odonoghue@linaro.org
Bryan O'Donoghue [Wed, 7 Sep 2022 00:01:01 +0000 (01:01 +0100)]
arm64: dts: qcom: sc7280: Drop redundant phy-names from DSI controller
phy-names has been marked deprecated. Remove it from the sc7280 DSI
controller block.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220907000105.786265-8-bryan.odonoghue@linaro.org
Bryan O'Donoghue [Wed, 7 Sep 2022 00:01:00 +0000 (01:01 +0100)]
arm64: dts: qcom: sc7180: Drop redundant phy-names from DSI controller
phy-names has been marked deprecated. Remove it from the sc7180 DSI
controller block.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220907000105.786265-7-bryan.odonoghue@linaro.org
Bryan O'Donoghue [Wed, 7 Sep 2022 00:00:59 +0000 (01:00 +0100)]
arm64: dts: qcom: msm8996: Drop redundant phy-names from DSI controller
phy-names has been marked deprecated. Remove it from the msm8996 DSI
controller block.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220907000105.786265-6-bryan.odonoghue@linaro.org
Bryan O'Donoghue [Wed, 7 Sep 2022 00:00:58 +0000 (01:00 +0100)]
arm64: dts: qcom: msm8916: Drop redundant phy-names from DSI controller
phy-names has been marked deprecated. Remove it from the msm8916 DSI
controller block.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220907000105.786265-5-bryan.odonoghue@linaro.org
Krishna Kurapati [Tue, 6 Sep 2022 16:15:33 +0000 (21:45 +0530)]
arm64: dts: qcom: sc7280: Update SNPS Phy params for SC7280 IDP device
Overriding the SNPS Phy tuning parameters for SC7280 IDP device.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1662480933-12326-4-git-send-email-quic_kriskura@quicinc.com
Matthias Kaehlcke [Thu, 1 Sep 2022 17:29:50 +0000 (10:29 -0700)]
arm64: dts: qcom: sc7180: Configure USB as wakeup source
The dwc3 USB controller of the sc7180 supports USB remote
wakeup, configure it as a wakeup source.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220901102946.v2.1.I347ea409ee3134bd32a29e33fecd1a6ef32085a0@changeid
Vladimir Zapolskiy [Thu, 1 Sep 2022 07:35:04 +0000 (10:35 +0300)]
arm64: dts: qcom: sm8450: Add description of camera control interfaces
Add description of two CCI controllers found on QCOM SM8450.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220901073504.3077363-1-vladimir.zapolskiy@linaro.org
Yunlong Jia [Thu, 1 Sep 2022 02:49:58 +0000 (02:49 +0000)]
arm64: dts: qcom: Add sc7180-pazquel360
Create first version device tree for pazquel360
pazquel360 is convertible and the pazquel it is based on is clamshell.
sku 20 for lte & wifi
sku 21 for wifi only
sku 22 for lte w/o esim & wifi
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220901024827.v3.2.Iea2d2918adfff2825b87d428b5732717425c196f@changeid
Yunlong Jia [Thu, 1 Sep 2022 02:49:57 +0000 (02:49 +0000)]
dt-bindings: arm: qcom: Document additional skus for sc7180 pazquel360
pazquel360 is an extension project based on pazquel.
We create 3 sku on pazquel360:
sku 20 for LTE with physical SIM _and_ eSIM and WiFi
sku 21 for WiFi only
sku 22 for LTE with only a physical SIM
Both sku20 and sku22 are LTE SKUs.
One has the eSIM stuffed and one doesn't.
There is a single shared device tree for the two.
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220901024827.v3.1.I3aa360986c0e7377ea5e96c116f014ff1ab8c968@changeid
Dmitry Baryshkov [Wed, 10 Aug 2022 03:54:22 +0000 (22:54 -0500)]
arm64: dts: qcom: sdm845: add displayport node
Add displayport controller device node, describing DisplayPort hardware
block on SDM845.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220810035424.2796777-3-bjorn.andersson@linaro.org
Dmitry Baryshkov [Wed, 10 Aug 2022 03:54:21 +0000 (22:54 -0500)]
arm64: dts: qcom: sdm845: switch usb_1 phy to use combo usb+dp phy
Change sdm845's usb_1_qmpphy to use combo usb+dp phy bindings, rather
than just usb phy.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220810035424.2796777-2-bjorn.andersson@linaro.org
Stephan Gerhold [Mon, 18 Jul 2022 14:03:40 +0000 (16:03 +0200)]
arm64: dts: qcom: msm8916: Drop MSS fallback compatible
MSM8916 was originally using the "qcom,q6v5-pil" compatible for the
MSS remoteproc. Later it was decided to use SoC-specific compatibles
instead, so "qcom,msm8916-mss-pil" is now the preferred compatible.
Commit
60a05ed059a0 ("arm64: dts: qcom: msm8916: Add MSM8916-specific
compatibles to SCM/MSS") updated the MSM8916 device tree to make use of
the new compatible but still kept the old "qcom,q6v5-pil" as fallback.
This is inconsistent with other SoCs and conflicts with the description
in the binding documentation (which says that only one compatible should
be present). Also, it has no functional advantage since older kernels
could not handle this DT anyway (e.g. "power-domains" in the MSS node is
only supported by kernels that also support "qcom,msm8916-mss-pil").
Make this consistent with other SoCs by using only the
"qcom,msm8916-mss-pil" compatible.
Fixes:
60a05ed059a0 ("arm64: dts: qcom: msm8916: Add MSM8916-specific compatibles to SCM/MSS")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220718140344.1831731-2-stephan.gerhold@kernkonzept.com
Krzysztof Kozlowski [Mon, 19 Sep 2022 16:33:33 +0000 (18:33 +0200)]
arm64: dts: qcom: correct white-space before {
Add missing space or remove redundant one before opening {.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919163333.129989-1-krzysztof.kozlowski@linaro.org
Konrad Dybcio [Sat, 8 Oct 2022 18:17:13 +0000 (20:17 +0200)]
arm64: dts: qcom: sm8250-edo: Add NXP PN553 NFC
Add a node for NXP PN553 NFC, using the nxp-nci driver.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221008181714.253634-1-konrad.dybcio@somainline.org
Krzysztof Kozlowski [Mon, 10 Oct 2022 11:44:14 +0000 (07:44 -0400)]
arm64: dts: qcom: sdm845-cheza: fix AP suspend pin bias
There is no "bias-no-pull" property. Assume intentions were disabling
bias.
Fixes:
79e7739f7b87 ("arm64: dts: qcom: sdm845-cheza: add initial cheza dt")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221010114417.29859-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 10 Oct 2022 11:44:13 +0000 (07:44 -0400)]
arm64: dts: qcom: sdm845-db845c: correct SPI2 pins drive strength
The pin configuration (done with generic pin controller helpers and
as expressed by bindings) requires children nodes with either:
1. "pins" property and the actual configuration,
2. another set of nodes with above point.
The qup_spi2_default pin configuration uses alreaady the second method
with a "pinmux" child, so configure drive-strength similarly in
"pinconf". Otherwise the PIN drive strength would not be applied.
Fixes:
8d23a0040475 ("arm64: dts: qcom: db845c: add Low speed expansion i2c and spi nodes")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221010114417.29859-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 10 Oct 2022 11:44:12 +0000 (07:44 -0400)]
arm64: dts: qcom: sdm630: fix UART1 pin bias
There is no "bias-no-pull" property. Assume intentions were disabling
bias.
Fixes:
b190fb010664 ("arm64: dts: qcom: sdm630: Add sdm630 dts file")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221010114417.29859-1-krzysztof.kozlowski@linaro.org
Robert Marko [Thu, 18 Aug 2022 22:18:15 +0000 (00:18 +0200)]
arm64: dts: qcom: ipq8074-hk01: add VQMMC supply
Since now we have control over the PMP8074 PMIC providing various system
voltages including L11 which provides the SDIO/eMMC I/O voltage set it as
the SDHCI VQMMC supply.
This allows SDHCI controller to switch to 1.8V I/O mode and support high
speed modes like HS200 and HS400.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818221815.346233-5-robimarko@gmail.com
Robert Marko [Thu, 18 Aug 2022 22:18:14 +0000 (00:18 +0200)]
arm64: dts: qcom: add PMP8074 DTSI
PMP8074 is a companion PMIC to the Qualcomm IPQ8074 series that is
controlled via SPMI.
Add DTSI for it providing GPIO, regulator, RTC and VADC support.
RTC is disabled by default as there is no built-in battery so it will
loose time unless board vendor added a battery, so make it optional.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818221815.346233-4-robimarko@gmail.com
Robert Marko [Thu, 18 Aug 2022 22:08:49 +0000 (00:08 +0200)]
arm64: dts: qcom: ipq8074: add clocks to APCS
APCS now has support for providing the APSS clocks as the child device
for IPQ8074.
So, add the A53 PLL and XO clocks in order to use APCS as the CPU
clocksource for APSS scaling.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818220849.339732-4-robimarko@gmail.com
Bjorn Andersson [Mon, 17 Oct 2022 19:40:27 +0000 (14:40 -0500)]
Merge branch '
20220818220628.339366-8-robimarko@gmail.com' into HEAD
Robert Marko [Thu, 18 Aug 2022 22:02:45 +0000 (00:02 +0200)]
arm64: dts: qcom: ipq8074: add thermal nodes
IPQ8074 has a tsens v2.3.0 peripheral which monitors
temperatures around the various subsystems on the
die.
So lets add the tsens and thermal zone nodes, passive
CPU cooling will come in later patches after CPU frequency
scaling is supported.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818220245.338396-5-robimarko@gmail.com
Dmitry Baryshkov [Sun, 24 Jul 2022 14:04:21 +0000 (17:04 +0300)]
arm64: dts: qcom: msm8996pro: expand Adreno OPP table
There are minor differeces between msm8996 and msm8996pro in terms of
GPU frequencies support. For example msm8996pro supports 652.8 MHz
frequency for the Adreno. Reclect these differences in msm8996pro.dtsi.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-8-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Sun, 24 Jul 2022 14:04:20 +0000 (17:04 +0300)]
arm64: dts: qcom: msm8996: fix GPU OPP table
Fix Adreno OPP table according to the msm-3.18. Enable 624 MHz for the
speed bin 3 and 560 MHz for bins 2 and 3.
Fixes:
69cc3114ab0f ("arm64: dts: Add Adreno GPU definitions")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-7-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Sun, 24 Jul 2022 14:04:19 +0000 (17:04 +0300)]
arm64: dts: qcom: msm8996: add support for speed bin 3
Add support for msm8996, speed bin 3. It supports full range of
frequencies on the power cluster, but is limited to 1.8 GHz on
performance cluster.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-6-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Sun, 24 Jul 2022 14:04:18 +0000 (17:04 +0300)]
arm64: dts: qcom: msm8996: fix supported-hw in cpufreq OPP tables
Adjust MSM8996 cpufreq tables according to tables in msm-3.18. Some of
the frequencies are not supported on speed bins other than 0. Also other
speed bins support intermediate topmost frequencies, not supported on
speed bin 0. Implement all these differencies.
Fixes:
90173a954a22 ("arm64: dts: qcom: msm8996: Add CPU opps")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-5-dmitry.baryshkov@linaro.org
Yassine Oudjana [Sun, 24 Jul 2022 14:04:17 +0000 (17:04 +0300)]
arm64: dts: qcom: msm8996-xiaomi-scorpio, natrium: Use MSM8996 Pro
The Xiaomi Mi Note 2 has the MSM8996 Pro SoC. Rename the dts
to match, include msm8996pro.dtsi, and add the qcom,msm8996pro
compatible. To do that, the msm8996.dtsi include in msm8996-xiaomi-common
has to be moved to msm8996-xiaomi-gemini, the only device that needs it
included after this change.
Since MSM8996Pro is largely compatible with MSM8996, keep old compatible
too rather than insiting on qcom,msm8996pro only. This allows the code
that doesn't yet know about msm8996pro to continue supporting these
devices.
[DB: Dropped msm-id changes.]
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
[DB: Applied the same change to Xiaomi Mi 5s Plus (natrium).]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-4-dmitry.baryshkov@linaro.org
Yassine Oudjana [Sun, 24 Jul 2022 14:04:16 +0000 (17:04 +0300)]
arm64: dts: qcom: msm8996: Add MSM8996 Pro support
Qualcomm MSM8996 Pro is a variant of MSM8996 with higher frequencies
supported both on CPU and GPU. There are other minor hardware
differencies in the CPU and GPU regulators and bus fabrics.
However this results in significant differences between 8996 and 8996
Pro CPU OPP tables. Judging from msm-3.18 there are only few common
frequencies supported by both msm8996 and msm8996pro. Rather than
hacking the tables for msm8996, split msm8996pro support into a separate
file. Later this would allow having additional customizations for the
CBF, CPR, retulators, etc.
[DB: dropped all non-CPU-OPP changes]
Fixes:
90173a954a22 ("arm64: dts: qcom: msm8996: Add CPU opps")
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
[DB: Realigned supported-hw to keep compat with current cpufreq driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-3-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Sun, 24 Jul 2022 14:04:15 +0000 (17:04 +0300)]
dt-bindings: arm: qcom: separate msm8996pro bindings
Xiaomi Mi 5s Plus (natrium) and Xiaomi Mi Note 2 (scorpio) use
MSM8996Pro rather than plain MSM8996. Describe this in the arm/qcom.yaml
bindings.
Since MSM8996Pro is largely compatible with MSM8996, keep old compatible
too rather than insiting on qcom,msm8996pro only. This allows the code
that doesn't yet know about msm8996pro to continue supporting these
devices.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-2-dmitry.baryshkov@linaro.org
Judy Hsiao [Thu, 21 Jul 2022 08:38:49 +0000 (08:38 +0000)]
arm64: dts: qcom: sc7280: Include sc7280-herobrine-audio-rt5682.dtsi in herobrine-r1
Include sc7280-herobrine-audio-rt5682.dtsi in herobrine-r1
as it uses rt5682 codec.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220721083849.1571744-4-judyhsiao@chromium.org
Judy Hsiao [Thu, 21 Jul 2022 08:38:48 +0000 (08:38 +0000)]
arm64: dts: qcom: sc7280: Add sc7280-herobrine-audio-rt5682.dtsi
Audio dtsi for sc7280 boards that using rt5682 headset codec:
1. Add dt nodes for sound card which use I2S playback and record
through rt5682s and I2S playback through max98357a.
2. Enable lpass cpu node and add pin control and dai-links.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220721083849.1571744-3-judyhsiao@chromium.org
Judy Hsiao [Thu, 21 Jul 2022 08:38:47 +0000 (08:38 +0000)]
arm64: dts: qcom: sc7280: herobrine: Add pinconf settings for mi2s1
1. Add drive strength property for mi2s1 on sc7280 based platforms.
2. Disable the pull-up for mi2s1 lines.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220721083849.1571744-2-judyhsiao@chromium.org
Robert Marko [Thu, 18 Aug 2022 22:06:27 +0000 (00:06 +0200)]
arm64: dts: qcom: ipq8074: correct APCS register space size
APCS DTS addition that was merged, was not supposed to get merged as it
was part of patch series that was superseded by 2 more patch series
that resolved issues with this one and greatly simplified things.
Since it already got merged, start by correcting the register space
size as APCS will not be providing regmap for PLL and it will conflict
with the standalone A53 PLL node.
Fixes:
50ed9fffec3a ("arm64: dts: qcom: ipq8074: add APCS node")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818220628.339366-8-robimarko@gmail.com
Rajendra Nayak [Tue, 27 Sep 2022 10:42:33 +0000 (16:12 +0530)]
arm64: dts: qcom: sc7280: Add required-opps for i2c
qup-i2c devices on sc7280 are clocked with a fixed clock (19.2 MHz)
Though qup-i2c does not support DVFS, it still needs to vote for a
performance state on 'CX' to satisfy the 19.2 Mhz clock frequency
requirement.
Use 'required-opps' to pass this information from
device tree, and also add the power-domains property to specify
the CX power-domain.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220927104233.29376-1-quic_rjendra@quicinc.com
Rajendra Nayak [Tue, 27 Sep 2022 10:26:46 +0000 (15:56 +0530)]
arm64: dts: qcom: sc7180: Add required-opps for USB
USB has a requirement to put a performance state vote on 'cx'
while active. Use 'required-opps' to pass this information from
device tree, and since all the GDSCs in GCC (including USB) are
sub-domains of cx, we also add cx as a power-domain for GCC.
Now when any of the consumers of the GDSCs (in this case USB)
votes on a perforamance state, genpd framework can identify that
the GDSC itself does not support a performance state and it
then propogates the vote to the parent, which in this case is cx.
This change would also mean that any GDSC in GCC thats left enabled
during low power state (perhaps because its marked with a
ALWAYS_ON flag) can prevent the system from entering low power
since that would prevent cx from transitioning to low power.
Ideally any consumers that would need to have their devices
(partially) powered to support wakeups should look at making the
resp. GDSCs transtion to a Retention (PWRSTS_RET) state instead
of leaving them ALWAYS_ON.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220927102646.14785-1-quic_rjendra@quicinc.com
Krishna Kurapati [Thu, 29 Sep 2022 14:38:10 +0000 (20:08 +0530)]
arm64: dts: qcom: sc7280: Update SNPS Phy params for SC7280
Add SNPS HS Phy tuning parameters for herobrine variant of
SC7280 devices.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1664462290-29869-1-git-send-email-quic_kriskura@quicinc.com
Krzysztof Kozlowski [Fri, 30 Sep 2022 19:20:39 +0000 (21:20 +0200)]
arm64: dts: qcom: sdm845-xiaomi-polaris: fix codec pin conf name
Fix typo in the codec's pin name to be configured. Mismatched name
caused the pin configuration to be ignored.
Fixes:
be497abe19bf ("arm64: dts: qcom: Add support for Xiaomi Mi Mix2s")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Molly Sophia <mollysophia379@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192039.240486-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 30 Sep 2022 19:20:38 +0000 (21:20 +0200)]
arm64: dts: qcom: sdm850-samsung-w737: correct I2C12 pins drive strength
The pin configuration (done with generic pin controller helpers and
as expressed by bindings) requires children nodes with either:
1. "pins" property and the actual configuration,
2. another set of nodes with above point.
The qup_i2c12_default pin configuration used second method - with a
"pinmux" child.
Fixes:
d4b341269efb ("arm64: dts: qcom: Add support for Samsung Galaxy Book2")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192039.240486-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 30 Sep 2022 19:20:37 +0000 (21:20 +0200)]
arm64: dts: qcom: sdm850-lenovo-yoga-c630: correct I2C12 pins drive strength
The pin configuration (done with generic pin controller helpers and
as expressed by bindings) requires children nodes with either:
1. "pins" property and the actual configuration,
2. another set of nodes with above point.
The qup_i2c12_default pin configuration used second method - with a
"pinmux" child.
Fixes:
44acee207844 ("arm64: dts: qcom: Add Lenovo Yoga C630")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192039.240486-1-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 30 Sep 2022 19:29:48 +0000 (21:29 +0200)]
arm64: dts: qcom: sm6125: align TLMM pin configuration with DT schema
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192954.242546-11-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 30 Sep 2022 19:29:47 +0000 (21:29 +0200)]
arm64: dts: qcom: sm6125-sony-xperia: add missing SD CD GPIO functions
Add default GPIO function to SD card detect pins on SM6125 Sony Xperia,
as required by bindings:
qcom/sm6125-sony-xperia-seine-pdx201.dtb: pinctrl@500000: sdc2-off-state: 'oneOf' conditional failed, one must be fixed:
'pins' is a required property
'function' is a required property
'clk-pins', 'cmd-pins', 'data-pins', 'sd-cd-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192954.242546-10-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 30 Sep 2022 19:29:46 +0000 (21:29 +0200)]
arm64: dts: qcom: sdm845: align TLMM pin configuration with DT schema
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
qcom/sdm845-lg-judyln.dtb: gpios@c000: 'vol-up-active-pins' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192954.242546-9-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 30 Sep 2022 19:29:45 +0000 (21:29 +0200)]
arm64: dts: qcom: msm8953: align TLMM pin configuration with DT schema
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
qcom/sdm632-fairphone-fp3.dtb: pinctrl@1000000: 'cd-off-pins', 'cd-on-pins', 'gpio-key-default-pins', ....
do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192954.242546-8-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 30 Sep 2022 19:29:44 +0000 (21:29 +0200)]
arm64: dts: qcom: sc7280-idp-ec-h1: add missing QUP GPIO functions
Add default GPIO function to SPI10 and SPI14 chip-select pins on SC7280
IDP, as required by bindings.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192954.242546-7-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 30 Sep 2022 19:29:43 +0000 (21:29 +0200)]
arm64: dts: qcom: sc7280-herobrine: correct number of gpio-line-names
There are 175 GPIOs (gpio0-174).
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192954.242546-6-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 30 Sep 2022 19:29:42 +0000 (21:29 +0200)]
arm64: dts: qcom: sc7280: align TLMM pin configuration with DT schema (really)
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
I already tried to do this in commit
d801357a0573 ("arm64: dts: qcom:
sc7280: align TLMM pin configuration with DT schema") and I missed the
fact that these nodes were not part of "state" node. Bindings did not
catch these errors due to its own issues.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192954.242546-5-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 30 Sep 2022 19:29:41 +0000 (21:29 +0200)]
arm64: dts: qcom: sc8280xp: align TLMM pin configuration with DT schema
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
qcom/sc8280xp-crd.dtb: pinctrl@f100000: kybd-default-state: 'oneOf' conditional failed, one must be fixed:
'pins' is a required property
'function' is a required property
'disable', 'int-n', 'reset' do not match any of the regexes: 'pinctrl-[0-9]+'
'disable', 'int-n', 'reset' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192954.242546-4-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 30 Sep 2022 19:29:40 +0000 (21:29 +0200)]
arm64: dts: qcom: sm8250-sony-xperia-edo: fix touchscreen bias-disable
The property to disable bias is "bias-disable".
Fixes:
e76c7e1f15fe ("arm64: dts: qcom: sm8250-edo: Add Samsung touchscreen")
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192954.242546-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 30 Sep 2022 19:29:39 +0000 (21:29 +0200)]
arm64: dts: qcom: sm8250: align TLMM pin configuration with DT schema
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Drop also unneeded split between mux and config.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192954.242546-2-krzysztof.kozlowski@linaro.org
Richard Acayan [Sat, 1 Oct 2022 21:19:33 +0000 (17:19 -0400)]
arm64: dts: qcom: add gpi-dma fallback compatible
The dt schema for gpi-dma has been updated with a new fallback
compatible string. Add the compatible strings to existing device trees.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221001211934.62511-4-mailingradian@gmail.com
Krzysztof Kozlowski [Thu, 6 Oct 2022 12:46:27 +0000 (14:46 +0200)]
arm64: dts: qcom: ipq6018: align TLMM pin configuration with DT schema
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221006124659.217540-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 6 Oct 2022 12:46:26 +0000 (14:46 +0200)]
arm64: dts: qcom: ipq6018-cp01-c1: use BLSPI1 pins
When BLSPI1 (originally SPI0, later renamed in commit
f82c48d46852
("arm64: dts: qcom: ipq6018: correct QUP peripheral labels")) was added,
the device node lacked respective pin configuration assignment.
Fixes:
5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221006124659.217540-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 6 Oct 2022 14:45:17 +0000 (16:45 +0200)]
arm64: dts: qcom: sm8150: align TLMM pin configuration with DT schema
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221006144518.256956-1-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 10 Sep 2022 09:14:21 +0000 (11:14 +0200)]
arm64: dts: qcom: sm8250: use generic name for LPASS clock controller
The node names should be generic according to Devicetree specification,
so use "clock-controller" instead of "cc". The bindings so far did not
define this name (as child of APR service).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220910091428.50418-9-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 10 Sep 2022 09:14:20 +0000 (11:14 +0200)]
arm64: dts: qcom: qrb5165-rb5: align dai node names with dtschema
DT schema expects DAI node names to be "dai":
qcom/qrb5165-rb5.dtb: dais: 'qi2s@16', 'qi2s@20' do not match any of the regexes: '^dai@[0-9]+$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220910091428.50418-8-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 10 Sep 2022 09:14:19 +0000 (11:14 +0200)]
arm64: dts: qcom: msm8996: align dai node names with dtschema
DT schema expects DAI node names to be "dai":
qcom/msm8996-mtp.dtb: dais: 'hdmi@1' does not match any of the regexes: '^dai@[0-9]+$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220910091428.50418-7-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 10 Sep 2022 09:14:18 +0000 (11:14 +0200)]
arm64: dts: qcom: sdm845: align dai node names with dtschema
DT schema expects DAI node names to be "dai":
qcom/sdm845-xiaomi-beryllium.dtb: dais: 'qi2s@22' does not match any of the regexes: '^dai@[0-9]+$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220910091428.50418-6-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 10 Sep 2022 09:14:17 +0000 (11:14 +0200)]
arm64: dts: qcom: msm8996: fix APR services nodes
DT schema expects APR services node names to be "service" and to have an
unit address (as it has a "reg" property):
qcom/msm8996-xiaomi-gemini.dtb: apr: 'power-domains', 'q6adm', 'q6afe', 'q6asm', 'qcom,smd-channels' do not match any of the regexes: '^service@[1-9a-d]$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220910091428.50418-5-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 10 Sep 2022 09:14:16 +0000 (11:14 +0200)]
arm64: dts: qcom: sm8250: align APR services node names with dtschema
DT schema expects APR services node names to be "service":
qcom/sm8250-sony-xperia-edo-pdx203.dtb: remoteproc@
17300000: glink-edge:apr:service@7: 'dais' does not match any of the regexes: '^.*@[0-9a-f]+$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220910091428.50418-4-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 10 Sep 2022 09:14:15 +0000 (11:14 +0200)]
arm64: dts: qcom: sdm845: align APR services node names with dtschema
DT schema expects APR services node names to be "service":
qcom/sdm630-sony-xperia-nile-voyager.dtb: remoteproc@
15700000: glink-edge:apr:service@4: 'dais' does not match any of the regexes: '^.*@[0-9a-f]+$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220910091428.50418-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 10 Sep 2022 09:14:14 +0000 (11:14 +0200)]
arm64: dts: qcom: sdm630: align APR services node names with dtschema
DT schema expects APR services node names to be "service":
qcom/sdm850-lenovo-yoga-c630.dtb: remoteproc-adsp: glink-edge:apr: 'apr-service@3', 'apr-service@4', 'apr-service@7', 'apr-service@8', 'qcom,glink-channels', 'qcom,intents' do not match any of the regexes: '^service@[1-9a-d]$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220910091428.50418-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 26 Sep 2022 09:21:03 +0000 (11:21 +0200)]
arm64: dts: qcom: align RPM regulators node name with bindings
Node names should be generic and new DT schema expects RPM regulators
node to be just "regulators".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220926092104.111449-3-krzysztof.kozlowski@linaro.org
Robert Marko [Thu, 18 Aug 2022 22:06:28 +0000 (00:06 +0200)]
arm64: dts: qcom: ipq8074: add A53 PLL node
Add the required node for A53 PLL which will be used to provide the CPU
clock via APCS for APSS scaling.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818220628.339366-9-robimarko@gmail.com
Linus Torvalds [Sun, 16 Oct 2022 22:36:24 +0000 (15:36 -0700)]
Linux 6.1-rc1
Linus Torvalds [Sun, 16 Oct 2022 22:27:07 +0000 (15:27 -0700)]
Merge tag 'random-6.1-rc1-for-linus' of git://git./linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
Linus Torvalds [Sun, 16 Oct 2022 22:14:29 +0000 (15:14 -0700)]
Merge tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git./linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Use BPF CO-RE (Compile Once, Run Everywhere) to support old kernels
when using bperf (perf BPF based counters) with cgroups.
- Support HiSilicon PCIe Performance Monitoring Unit (PMU), that
monitors bandwidth, latency, bus utilization and buffer occupancy.
Documented in Documentation/admin-guide/perf/hisi-pcie-pmu.rst.
- User space tasks can migrate between CPUs, so when tracing selected
CPUs, system-wide sideband is still needed, fix it in the setup of
Intel PT on hybrid systems.
- Fix metricgroups title message in 'perf list', it should state that
the metrics groups are to be used with the '-M' option, not '-e'.
- Sync the msr-index.h copy with the kernel sources, adding support for
using "AMD64_TSC_RATIO" in filter expressions in 'perf trace' as well
as decoding it when printing the MSR tracepoint arguments.
- Fix program header size and alignment when generating a JIT ELF in
'perf inject'.
- Add multiple new Intel PT 'perf test' entries, including a jitdump
one.
- Fix the 'perf test' entries for 'perf stat' CSV and JSON output when
running on PowerPC due to an invalid topology number in that arch.
- Fix the 'perf test' for arm_coresight failures on the ARM Juno
system.
- Fix the 'perf test' attr entry for PERF_FORMAT_LOST, adding this
option to the or expression expected in the intercepted
perf_event_open() syscall.
- Add missing condition flags ('hs', 'lo', 'vc', 'vs') for arm64 in the
'perf annotate' asm parser.
- Fix 'perf mem record -C' option processing, it was being chopped up
when preparing the underlying 'perf record -e mem-events' and thus
being ignored, requiring using '-- -C CPUs' as a workaround.
- Improvements and tidy ups for 'perf test' shell infra.
- Fix Intel PT information printing segfault in uClibc, where a NULL
format was being passed to fprintf.
* tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits)
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet
perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driver
perf auxtrace arm: Refactor event list iteration in auxtrace_record__init()
perf tests stat+json_output: Include sanity check for topology
perf tests stat+csv_output: Include sanity check for topology
perf intel-pt: Fix system_wide dummy event for hybrid
perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc
perf test: Fix attr tests for PERF_FORMAT_LOST
perf test: test_intel_pt.sh: Add 9 tests
perf inject: Fix GEN_ELF_TEXT_OFFSET for jit
perf test: test_intel_pt.sh: Add jitdump test
perf test: test_intel_pt.sh: Tidy some alignment
perf test: test_intel_pt.sh: Print a message when skipping kernel tracing
perf test: test_intel_pt.sh: Tidy some perf record options
perf test: test_intel_pt.sh: Fix return checking again
perf: Skip and warn on unknown format 'configN' attrs
perf list: Fix metricgroups title message
perf mem: Fix -C option behavior for perf mem record
perf annotate: Add missing condition flags for arm64
...
Linus Torvalds [Sun, 16 Oct 2022 18:12:22 +0000 (11:12 -0700)]
Merge tag 'kbuild-fixes-v6.1' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y compile error for the
combination of Clang >= 14 and GAS <= 2.35.
- Drop vmlinux.bz2 from the rpm package as it just annoyingly increased
the package size.
- Fix modpost error under build environments using musl.
- Make *.ll files keep value names for easier debugging
- Fix single directory build
- Prevent RISC-V from selecting the broken DWARF5 support when Clang
and GAS are used together.
* tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5
kbuild: fix single directory build
kbuild: add -fno-discard-value-names to cmd_cc_ll_c
scripts/clang-tools: Convert clang-tidy args to list
modpost: put modpost options before argument
kbuild: Stop including vmlinux.bz2 in the rpm's
Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5
Linus Torvalds [Sun, 16 Oct 2022 18:08:19 +0000 (11:08 -0700)]
Merge tag 'clk-for-linus' of git://git./linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
"This is the final part of the clk patches for this merge window.
The clk rate range series needed another week to fully bake. Maxime
fixed the bug that broke clk notifiers and prevented this from being
included in the first pull request. He also added a unit test on top
to make sure it doesn't break so easily again. The majority of the
series fixes up how the clk_set_rate_*() APIs work, particularly
around when the rate constraints are dropped and how they move around
when reparenting clks. Overall it's a much needed improvement to the
clk rate range APIs that used to be pretty broken if you looked
sideways.
Beyond the core changes there are a few driver fixes for a compilation
issue or improper data causing clks to fail to register or have the
wrong parents. These are good to get in before the first -rc so that
the system actually boots on the affected devices"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits)
clk: tegra: Fix Tegra PWM parent clock
clk: at91: fix the build with binutils 2.27
clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks
clk: mediatek: clk-mux: Add .determine_rate() callback
clk: tests: Add tests for notifiers
clk: Update req_rate on __clk_recalc_rates()
clk: tests: Add missing test case for ranges
clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
clk: Introduce the clk_hw_get_rate_range function
clk: Zero the clk_rate_request structure
clk: Stop forwarding clk_rate_requests to the parent
clk: Constify clk_has_parent()
clk: Introduce clk_core_has_parent()
clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
clk: Add our request boundaries in clk_core_init_rate_req
clk: Introduce clk_hw_init_rate_request()
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller
clk: Change clk_core_init_rate_req prototype
clk: Set req_rate on reparenting
clk: Take into account uncached clocks in clk_set_rate_range()
...
Linus Torvalds [Sun, 16 Oct 2022 18:01:40 +0000 (11:01 -0700)]
Merge tag '6.1-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
- fix a regression in guest mounts to old servers
- improvements to directory leasing (caching directory entries safely
beyond the root directory)
- symlink improvement (reducing roundtrips needed to process symlinks)
- an lseek fix (to problem where some dir entries could be skipped)
- improved ioctl for returning more detailed information on directory
change notifications
- clarify multichannel interface query warning
- cleanup fix (for better aligning buffers using ALIGN and round_up)
- a compounding fix
- fix some uninitialized variable bugs found by Coverity and the kernel
test robot
* tag '6.1-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: improve SMB3 change notification support
cifs: lease key is uninitialized in two additional functions when smb1
cifs: lease key is uninitialized in smb1 paths
smb3: must initialize two ACL struct fields to zero
cifs: fix double-fault crash during ntlmssp
cifs: fix static checker warning
cifs: use ALIGN() and round_up() macros
cifs: find and use the dentry for cached non-root directories also
cifs: enable caching of directories for which a lease is held
cifs: prevent copying past input buffer boundaries
cifs: fix uninitialised var in smb2_compound_op()
cifs: improve symlink handling for smb2+
smb3: clarify multichannel warning
cifs: fix regression in very old smb1 mounts
cifs: fix skipping to incorrect offset in emit_cached_dirents
Tetsuo Handa [Sat, 15 Oct 2022 15:53:51 +0000 (00:53 +0900)]
Revert "cpumask: fix checking valid cpu range".
This reverts commit
78e5a3399421 ("cpumask: fix checking valid cpu range").
syzbot is hitting WARN_ON_ONCE(cpu >= nr_cpumask_bits) warning at
cpu_max_bits_warn() [1], for commit
78e5a3399421 ("cpumask: fix checking
valid cpu range") is broken. Obviously that patch hits WARN_ON_ONCE()
when e.g. reading /proc/cpuinfo because passing "cpu + 1" instead of
"cpu" will trivially hit cpu == nr_cpumask_bits condition.
Although syzbot found this problem in linux-next.git on 2022/09/27 [2],
this problem was not fixed immediately. As a result, that patch was
sent to linux.git before the patch author recognizes this problem, and
syzbot started failing to test changes in linux.git since 2022/10/10
[3].
Andrew Jones proposed a fix for x86 and riscv architectures [4]. But
[2] and [5] indicate that affected locations are not limited to arch
code. More delay before we find and fix affected locations, less tested
kernel (and more difficult to bisect and fix) before release.
We should have inspected and fixed basically all cpumask users before
applying that patch. We should not crash kernels in order to ask
existing cpumask users to update their code, even if limited to
CONFIG_DEBUG_PER_CPU_MAPS=y case.
Link: https://syzkaller.appspot.com/bug?extid=d0fd2bf0dd6da72496dd
Link: https://syzkaller.appspot.com/bug?extid=21da700f3c9f0bc40150
Link: https://syzkaller.appspot.com/bug?extid=51a652e2d24d53e75734
Link: https://lkml.kernel.org/r/20221014155845.1986223-1-ajones@ventanamicro.com
Link: https://syzkaller.appspot.com/bug?extid=4d46c43d81c3bd155060
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Reported-by: syzbot+d0fd2bf0dd6da72496dd@syzkaller.appspotmail.com
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nathan Chancellor [Fri, 14 Oct 2022 20:42:11 +0000 (13:42 -0700)]
lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5
When building with a RISC-V kernel with DWARF5 debug info using clang
and the GNU assembler, several instances of the following error appear:
/tmp/vgettimeofday-48aa35.s:2963: Error: non-constant .uleb128 is not supported
Dumping the .s file reveals these .uleb128 directives come from
.debug_loc and .debug_ranges:
.Ldebug_loc0:
.byte 4 # DW_LLE_offset_pair
.uleb128 .Lfunc_begin0-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp1-.Lfunc_begin0 # ending offset
.byte 1 # Loc expr size
.byte 90 # DW_OP_reg10
.byte 0 # DW_LLE_end_of_list
.Ldebug_ranges0:
.byte 4 # DW_RLE_offset_pair
.uleb128 .Ltmp6-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp27-.Lfunc_begin0 # ending offset
.byte 4 # DW_RLE_offset_pair
.uleb128 .Ltmp28-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp30-.Lfunc_begin0 # ending offset
.byte 0 # DW_RLE_end_of_list
There is an outstanding binutils issue to support a non-constant operand
to .sleb128 and .uleb128 in GAS for RISC-V but there does not appear to
be any movement on it, due to concerns over how it would work with
linker relaxation.
To avoid these build errors, prevent DWARF5 from being selected when
using clang and an assembler that does not have support for these symbol
deltas, which can be easily checked in Kconfig with as-instr plus the
small test program from the dwz test suite from the binutils issue.
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27215
Link: https://github.com/ClangBuiltLinux/linux/issues/1719
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Fri, 14 Oct 2022 20:18:11 +0000 (05:18 +0900)]
kbuild: fix single directory build
Commit
f110e5a250e3 ("kbuild: refactor single builds of *.ko") was wrong.
KBUILD_MODULES _is_ needed for single builds.
Otherwise, "make foo/bar/baz/" does not build module objects at all.
Fixes:
f110e5a250e3 ("kbuild: refactor single builds of *.ko")
Reported-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: David Sterba <dsterba@suse.com>
Linus Torvalds [Sun, 16 Oct 2022 00:05:07 +0000 (17:05 -0700)]
Merge tag 'slab-for-6.1-rc1-hotfix' of git://git./linux/kernel/git/vbabka/slab
Pull slab hotfix from Vlastimil Babka:
"A single fix for the common-kmalloc series, for warnings on mips and
sparc64 reported by Guenter Roeck"
* tag 'slab-for-6.1-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocation
Linus Torvalds [Sat, 15 Oct 2022 23:47:33 +0000 (16:47 -0700)]
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"I have relocated to London so not much work from me while I get
settled.
Still, OpenRISC picked up two patches in this window:
- Fix for kernel page table walking from Jann Horn
- MAINTAINER entry cleanup from Palmer Dabbelt"
* tag 'for-linus' of https://github.com/openrisc/linux:
MAINTAINERS: git://github -> https://github.com for openrisc
openrisc: Fix pagewalk usage in arch_dma_{clear, set}_uncached
Linus Torvalds [Sat, 15 Oct 2022 23:36:38 +0000 (16:36 -0700)]
Merge tag 'pci-v6.1-fixes-1' of git://git./linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
"Revert the attempt to distribute spare resources to unconfigured
hotplug bridges at boot time.
This fixed some dock hot-add scenarios, but Jonathan Cameron reported
that it broke a topology with a multi-function device where one
function was a Switch Upstream Port and the other was an Endpoint"
* tag 'pci-v6.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: Distribute available resources for root buses, too"
Hyeonggon Yoo [Sat, 15 Oct 2022 04:34:29 +0000 (13:34 +0900)]
mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocation
After commit
d6a71648dbc0 ("mm/slab: kmalloc: pass requests larger than
order-1 page to page allocator"), SLAB passes large ( > PAGE_SIZE * 2)
requests to buddy like SLUB does.
SLAB has been using kmalloc caches to allocate freelist_idx_t array for
off slab caches. But after the commit, freelist_size can be bigger than
KMALLOC_MAX_CACHE_SIZE.
Instead of using pointer to kmalloc cache, use kmalloc_node() and only
check if the kmalloc cache is off slab during calculate_slab_order().
If freelist_size > KMALLOC_MAX_CACHE_SIZE, no looping condition happens
as it allocates freelist_idx_t array directly from buddy.
Link: https://lore.kernel.org/all/20221014205818.GA1428667@roeck-us.net/
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes:
d6a71648dbc0 ("mm/slab: kmalloc: pass requests larger than order-1 page to page allocator")
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Palmer Dabbelt [Thu, 13 Oct 2022 21:46:37 +0000 (14:46 -0700)]
MAINTAINERS: git://github -> https://github.com for openrisc
Github deprecated the git:// links about a year ago, so let's move to
the https:// URLs instead.
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Steve French [Sat, 15 Oct 2022 05:43:22 +0000 (00:43 -0500)]
smb3: improve SMB3 change notification support
Change notification is a commonly supported feature by most servers,
but the current ioctl to request notification when a directory is
changed does not return the information about what changed
(even though it is returned by the server in the SMB3 change
notify response), it simply returns when there is a change.
This ioctl improves upon CIFS_IOC_NOTIFY by returning the notify
information structure which includes the name of the file(s) that
changed and why. See MS-SMB2 2.2.35 for details on the individual
filter flags and the file_notify_information structure returned.
To use this simply pass in the following (with enough space
to fit at least one file_notify_information structure)
struct __attribute__((__packed__)) smb3_notify {
uint32_t completion_filter;
bool watch_tree;
uint32_t data_len;
uint8_t data[];
} __packed;
using CIFS_IOC_NOTIFY_INFO 0xc009cf0b
or equivalently _IOWR(CIFS_IOCTL_MAGIC, 11, struct smb3_notify_info)
The ioctl will block until the server detects a change to that
directory or its subdirectories (if watch_tree is set).
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French [Sat, 15 Oct 2022 01:00:32 +0000 (20:00 -0500)]
cifs: lease key is uninitialized in two additional functions when smb1
cifs_open and _cifsFileInfo_put also end up with lease_key uninitialized
in smb1 mounts. It is cleaner to set lease key to zero in these
places where leases are not supported (smb1 can not return lease keys
so the field was uninitialized).
Addresses-Coverity: 1514207 ("Uninitialized scalar variable")
Addresses-Coverity: 1514331 ("Uninitialized scalar variable")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French [Sat, 15 Oct 2022 00:18:32 +0000 (19:18 -0500)]
cifs: lease key is uninitialized in smb1 paths
It is cleaner to set lease key to zero in the places where leases are not
supported (smb1 can not return lease keys so the field was uninitialized).
Addresses-Coverity: 1513994 ("Uninitialized scalar variable")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French [Fri, 14 Oct 2022 23:50:20 +0000 (18:50 -0500)]
smb3: must initialize two ACL struct fields to zero
Coverity spotted that we were not initalizing Stbz1 and Stbz2 to
zero in create_sd_buf.
Addresses-Coverity: 1513848 ("Uninitialized scalar variable")
Cc: <stable@vger.kernel.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>