perf symbols: Fix return value when loading PE DSO

[ Upstream commit 77771a97011fa9146ccfaf2983a3a2885dc57b6f ]

The first time dso__load() was called on a PE file it always returned -1
error. This caused the first call to map__find_symbol() to always fail
on a PE file so the first sample from each PE file always had symbol
<unknown>. Subsequent samples succeed however because the DSO is already
loaded.

This fixes dso__load() to return 0 when successfully loading a DSO with
libbfd.

Fixes: eac9a4342e5447ca ("perf symbols: Try reading the symbol table with libbfd")
Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Huw Davies <huw@codeweavers.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Ulrich Czekalla <uczekalla@codeweavers.com>
Link: http://lore.kernel.org/lkml/1671b43b-09c3-1911-dbf8-7f030242fbf7@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

printk: avoid prb_first_valid_seq() where possible

[ Upstream commit 13791c80b0cdf54d92fc54221cdf490683b109de ]

If message sizes average larger than expected (more than 32
characters), the data_ring will wrap before the desc_ring. Once the
data_ring wraps, it will start invalidating descriptors. These
invalid descriptors hang around until they are eventually recycled
when the desc_ring wraps. Readers do not care about invalid
descriptors, but they still need to iterate past them. If the
average message size is much larger than 32 characters, then there
will be many invalid descriptors preceding the valid descriptors.

The function prb_first_valid_seq() always begins at the oldest
descriptor and searches for the first valid descriptor. This can
be rather expensive for the above scenario. And, in fact, because
of its heavy usage in /dev/kmsg, there have been reports of long
delays and even RCU stalls.

For code that does not need to search from the oldest record,
replace prb_first_valid_seq() usage with prb_read_valid_*()
functions, which provide a start sequence number to search from.

Fixes: 896fbe20b4e2333fb55 ("printk: use the lockless ringbuffer")
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: J. Avila <elavila@google.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210211173152.1629-1-john.ogness@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: Skip zero-length transfers in spi_transfer_one_message()

[ Upstream commit b306320322c9cfaa465bc2c7367acf6072b1ac0e ]

With the introduction of 26751de25d25 ("spi: bcm2835: Micro-optimise
FIFO loops") it has become apparent that some users might initiate
zero-length SPI transfers. A fact the micro-optimization omitted, and
which turned out to cause crashes[1].

Instead of changing the micro-optimization itself, use a bigger hammer
and skip zero-length transfers altogether for drivers using the default
transfer_one_message() implementation.

Reported-by: Phil Elwell <phil@raspberrypi.com>
Fixes: 26751de25d25 ("spi: bcm2835: Micro-optimise FIFO loops")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
[1] https://github.com/raspberrypi/linux/issues/4100
Link: https://lore.kernel.org/r/20210211180820.25757-1-nsaenzjulienne@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: dw: Avoid stack content exposure

[ Upstream commit 386f771aad15dd535f2368b4adc9958c0160edd4 ]

Since "data" is u32, &data is a "u32 *" type, which means pointer math
will move in u32-sized steps. This was meant to be a byte offset, so
cast &data to "char *" to aim the copy into the correct location.

Seen with -Warray-bounds (and found by Coverity):

In file included from ./include/linux/string.h:269,
                 from ./arch/powerpc/include/asm/paca.h:15,
                 from ./arch/powerpc/include/asm/current.h:13,
                 from ./include/linux/mutex.h:14,
                 from ./include/linux/notifier.h:14,
                 from ./include/linux/clk.h:14,
                 from drivers/spi/spi-dw-bt1.c:12:
In function 'memcpy',
    inlined from 'dw_spi_bt1_dirmap_copy_from_map' at drivers/spi/spi-dw-bt1.c:87:3:
./include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset 4 is out of the bounds [0, 4] of object 'data' with type 'u32' {aka 'unsigned int'} [-Warray-bounds]
   20 | #define __underlying_memcpy __builtin_memcpy
      |                             ^
./include/linux/fortify-string.h:191:9: note: in expansion of macro '__underlying_memcpy'
  191 |  return __underlying_memcpy(p, q, size);
      |         ^~~~~~~~~~~~~~~~~~~
drivers/spi/spi-dw-bt1.c: In function 'dw_spi_bt1_dirmap_copy_from_map':
drivers/spi/spi-dw-bt1.c:77:6: note: 'data' declared here
   77 |  u32 data;
      |      ^~~~

Addresses-Coverity: CID 1497771 Out-of-bounds access
Fixes: abf00907538e ("spi: dw: Add Baikal-T1 SPI Controller glue driver")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20210211203714.1929862-1-keescook@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: bd718x7, bd71828, Fix dvs voltage levels

[ Upstream commit c294554111a835598b557db789d9ad2379b512a2 ]

The ROHM BD718x7 and BD71828 drivers support setting HW state
specific voltages from device-tree. This is used also by various
in-tree DTS files.

These drivers do incorrectly try to compose bit-map using enum
values. By a chance this works for first two valid levels having
values 1 and 2 - but setting values for the rest of the levels
do indicate capability of setting values for first levels as
well. Luckily the regulators which support setting values for
SUSPEND/LPSR do usually also support setting values for RUN
and IDLE too - thus this has not been such a fatal issue.

Fix this by defining the old enum values as bits and fixing the
parsing code. This allows keeping existing IC specific drivers
intact and only slightly changing the rohm-regulator.c

Fixes: 21b72156ede8b ("regulator: bd718x7: Split driver to common and bd718x7 specific parts")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210212080023.GA880728@localhost.localdomain
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf symbols: Use (long) for iterator for bfd symbols

[ Upstream commit 96de68fff5ded8833bf5832658cb43c54f86ff6c ]

GCC (GCC) 8.4.0 20200304 fails to build perf with:
: util/symbol.c: In function 'dso__load_bfd_symbols':
: util/symbol.c:1626:16: error: comparison of integer expressions of different signednes
:   for (i = 0; i < symbols_count; ++i) {
:                 ^
: util/symbol.c:1632:16: error: comparison of integer expressions of different signednes
:    while (i + 1 < symbols_count &&
:                 ^
: util/symbol.c:1637:13: error: comparison of integer expressions of different signednes
:    if (i + 1 < symbols_count &&
:              ^
: cc1: all warnings being treated as errors

It's unlikely that the symtable will be that big, but the fix is an
oneliner and as perf has CORE_CFLAGS += -Wextra, which makes build to
fail together with CORE_CFLAGS += -Werror

Fixes: eac9a4342e54 ("perf symbols: Try reading the symbol table with libbfd")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Jacek Caban <jacek@codeweavers.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Link: http://lore.kernel.org/lkml/20210209145148.178702-1-dima@arista.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/ftrace: Update synthetic event syntax errors

[ Upstream commit b5734e997e1117afb479ffda500e36fa91aea3e8 ]

Some of the synthetic event errors and positions have changed in the
code - update those and add several more tests.

Also add a runtime check to ensure that the kernel supports dynamic
strings in synthetic events, which these tests require.

Link: https://lkml.kernel.org/r/51402656433455baead34f068c6e9466b64df9c0.1612208610.git.zanussi@kernel.org
Fixes: 81ff92a93d95 (selftests/ftrace: Add test case for synthetic event syntax errors)
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: aspeed: Fix APLL calculate formula from ast2600-A2

[ Upstream commit 6286ce1e3ece54799f12775f8ce2a1cba9cbcfc5 ]

Starting from A2, the A-PLL calculation has changed. Use the
existing formula for A0/A1 and the new formula for A2 onwards.

Fixes: d3d04f6c330a ("clk: Add support for AST2600 SoC")
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Link: https://lore.kernel.org/r/20210119061715.6043-1-ryan_chen@aspeedtech.com
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: qcom-rpmh: fix pm8009 ldo7

[ Upstream commit 20ccc362c3d20da734af896e075b74222589f2c0 ]

Use the correct name to avoid ldo7 commands being sent to ldo6's address.

Fixes: 06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210211034935.5622-1-jonathan@marek.ca
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/kuap: Restore AMR after replaying soft interrupts

[ Upstream commit 60a707d0c99aff4eadb7fd334c5fd21df386723e ]

Since de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace
Access Protection"), user access helpers call user_{read|write}_access_{begin|end}
when user space access is allowed.

Commit 890274c2dc4c ("powerpc/64s: Implement KUAP for Radix MMU") made
the mentioned helpers program a AMR special register to allow such
access for a short period of time, most of the time AMR is expected to
block user memory access by the kernel.

Since the code accesses the user space memory, unsafe_get_user() calls
might_fault() which calls arch_local_irq_restore() if either
CONFIG_PROVE_LOCKING or CONFIG_DEBUG_ATOMIC_SLEEP is enabled.
arch_local_irq_restore() then attempts to replay pending soft
interrupts as KUAP regions have hardware interrupts enabled.

If a pending interrupt happens to do user access (performance
interrupts do that), it enables access for a short period of time so
after returning from the replay, the user access state remains blocked
and if a user page fault happens - "Bug: Read fault blocked by AMR!"
appears and SIGSEGV is sent.

An example trace:
  Bug: Read fault blocked by AMR!
  WARNING: CPU: 0 PID: 1603 at /home/aik/p/kernel/arch/powerpc/include/asm/book3s/64/kup-radix.h:145
  CPU: 0 PID: 1603 Comm: amr Not tainted 5.10.0-rc6_v5.10-rc6_a+fstn1 #24
  NIP:  c00000000009ece8 LR: c00000000009ece4 CTR: 0000000000000000
  REGS: c00000000dc63560 TRAP: 0700   Not tainted  (5.10.0-rc6_v5.10-rc6_a+fstn1)
  MSR:  8000000000021033 <SF,ME,IR,DR,RI,LE>  CR: 28002888  XER: 20040000
  CFAR: c0000000001fa928 IRQMASK: 1
  GPR00: c00000000009ece4 c00000000dc637f0 c000000002397600 000000000000001f
  GPR04: c0000000020eb318 0000000000000000 c00000000dc63494 0000000000000027
  GPR08: c00000007fe4de68 c00000000dfe9180 0000000000000000 0000000000000001
  GPR12: 0000000000002000 c0000000030a0000 0000000000000000 0000000000000000
  GPR16: 0000000000000000 0000000000000000 0000000000000000 bfffffffffffffff
  GPR20: 0000000000000000 c0000000134a4020 c0000000019c2218 0000000000000fe0
  GPR24: 0000000000000000 0000000000000000 c00000000d106200 0000000040000000
  GPR28: 0000000000000000 0000000000000300 c00000000dc63910 c000000001946730
  NIP __do_page_fault+0xb38/0xde0
  LR  __do_page_fault+0xb34/0xde0
  Call Trace:
    __do_page_fault+0xb34/0xde0 (unreliable)
    handle_page_fault+0x10/0x2c
  --- interrupt: 300 at strncpy_from_user+0x290/0x440
      LR = strncpy_from_user+0x284/0x440
    strncpy_from_user+0x2f0/0x440 (unreliable)
    getname_flags+0x88/0x2c0
    do_sys_openat2+0x2d4/0x5f0
    do_sys_open+0xcc/0x140
    system_call_exception+0x160/0x240
    system_call_common+0xf0/0x27c

To fix it save/restore the AMR when replaying interrupts, and also
add a check if AMR was not blocked prior to replaying interrupts.

Originally found by syzkaller.

Fixes: 890274c2dc4c ("powerpc/64s: Implement KUAP for Radix MMU")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Use normal commit citation format and add full oops log to
      change log, move kuap_check_amr() into the restore routine to
      avoid warnings about unreconciled IRQ state]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210202091541.36499-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/uaccess: Avoid might_fault() when user access is enabled

[ Upstream commit 7d506ca97b665b95e698a53697dad99fae813c1a ]

The amount of code executed with enabled user space access (unlocked
KUAP) should be minimal. However with CONFIG_PROVE_LOCKING or
CONFIG_DEBUG_ATOMIC_SLEEP enabled, might_fault() calls into various
parts of the kernel, and may even end up replaying interrupts which in
turn may access user space and forget to restore the KUAP state.

The problem places are:
  1. strncpy_from_user (and similar) which unlock KUAP and call
     unsafe_get_user -> __get_user_allowed -> __get_user_nocheck()
     with do_allow=false to skip KUAP as the caller took care of it.
  2. __unsafe_put_user_goto() which is called with unlocked KUAP.

eg:
  WARNING: CPU: 30 PID: 1 at arch/powerpc/include/asm/book3s/64/kup.h:324 arch_local_irq_restore+0x160/0x190
  NIP arch_local_irq_restore+0x160/0x190
  LR  lock_is_held_type+0x140/0x200
  Call Trace:
    0xc00000007f392ff8 (unreliable)
    ___might_sleep+0x180/0x320
    __might_fault+0x50/0xe0
    filldir64+0x2d0/0x5d0
    call_filldir+0xc8/0x180
    ext4_readdir+0x948/0xb40
    iterate_dir+0x1ec/0x240
    sys_getdents64+0x80/0x290
    system_call_exception+0x160/0x280
    system_call_common+0xf0/0x27c

Change __get_user_nocheck() to look at `do_allow` to decide whether to
skip might_fault(). Since strncpy_from_user/etc call might_fault()
anyway before unlocking KUAP, there should be no visible change.

Drop might_fault() in __unsafe_put_user_goto() as it is only called
from unsafe_put_user(), which already has KUAP unlocked.

Since keeping might_fault() is still desirable for debugging, add
calls to it in user_[read|write]_access_begin(). That also allows us
to drop the is_kernel_addr() test, because there should be no code
using user_[read|write]_access_begin() in order to access a kernel
address.

Fixes: de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace Access Protection")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[mpe: Combine with related patch from myself, merge change logs]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210204121612.32721-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: pxa2xx: Fix the controller numbering for Wildcat Point

[ Upstream commit 54c5d3bfb0cfb7b31259765524567871dee11615 ]

Wildcat Point has two SPI controllers and added one is actually second one.
Fix the numbering by adding the description of the first one.

Fixes: caba248db286 ("spi: spi-pxa2xx-pci: Add ID and driver type for WildcatPoint PCH")
Cc: Leif Liddy <leif.liddy@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210208163816.22147-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: divider: fix initialization with parent_hw

[ Upstream commit 0225daea08141b1dff681502d5af70b71e8b11ec ]

If a driver registers a divider clock with a parent_hw instead of the
parent_name, the parent_hw is ignored and the clock does not have a
parent.

Fix this by initializing the parents the same way they are initialized
for clock gates.

Fixes: ff258817137a ("clk: divider: Add support for specifying parents via DT/pointers")
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210121071659.1226489-3-m.tretter@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Disable RQ inline by default

[ Upstream commit 7373de9adb19aebed2781d3fdde576533d626d7a ]

This feature should only be enabled by querying capability from firmware.

Fixes: ba6bb7e97421 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/1612517974-31867-5-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix type of sq_signal_bits

[ Upstream commit ea4092f3b56b236d08890ea589506ebd76248c53 ]

This bit should be in type of enum ib_sig_type, or there will be a sparse
warning.

Fixes: bfe860351e31 ("RDMA/hns: Fix cast from or to restricted __le32 for driver")
Link: https://lore.kernel.org/r/1612517974-31867-3-git-send-email-liweihang@huawei.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Fix calculation of tx_valid_cpus size

[ Upstream commit 429fa9698957d1a910535ce5e33aedf5adfdabc1 ]

The size of tx_valid_cpus was calculated under the assumption that the
numa nodes identifiers are continuous, which is not the case in all archs
as this could lead to the following panic when trying to access an invalid
tx_valid_cpus index, avoid the following panic by using nr_node_ids
instead of num_online_nodes() to allocate the tx_valid_cpus size.

   Kernel attempted to read user page (8) - exploit attempt? (uid: 0)
   BUG: Kernel NULL pointer dereference on read at 0x00000008
   Faulting instruction address: 0xc0080000081b4a90
   Oops: Kernel access of bad area, sig: 11 [#1]
   LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
   Modules linked in: siw(+) rfkill rpcrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm sunrpc ib_umad rdma_cm ib_cm iw_cm i40iw ib_uverbs ib_core i40e ses enclosure scsi_transport_sas ipmi_powernv ibmpowernv at24 ofpart ipmi_devintf regmap_i2c ipmi_msghandler powernv_flash uio_pdrv_genirq uio mtd opal_prd zram ip_tables xfs libcrc32c sd_mod t10_pi ast i2c_algo_bit drm_vram_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm_ttm_helper ttm drm vmx_crypto aacraid drm_panel_orientation_quirks dm_mod
   CPU: 40 PID: 3279 Comm: modprobe Tainted: G        W      X --------- ---  5.11.0-0.rc4.129.eln108.ppc64le #2
   NIP:  c0080000081b4a90 LR: c0080000081b4a2c CTR: c0000000007ce1c0
   REGS: c000000027fa77b0 TRAP: 0300   Tainted: G        W      X --------- ---   (5.11.0-0.rc4.129.eln108.ppc64le)
   MSR:  9000000002009033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE>  CR: 44224882  XER: 00000000
   CFAR: c0000000007ce200 DAR: 0000000000000008 DSISR: 40000000 IRQMASK: 0
   GPR00: c0080000081b4a2c c000000027fa7a50 c0080000081c3900 0000000000000040
   GPR04: c000000002023080 c000000012e1c300 000020072ad70000 0000000000000001
   GPR08: c000000001726068 0000000000000008 0000000000000008 c0080000081b5758
   GPR12: c0000000007ce1c0 c0000007fffc3000 00000001590b1e40 0000000000000000
   GPR16: 0000000000000000 0000000000000001 000000011ad68fc8 00007fffcc09c5c8
   GPR20: 0000000000000008 0000000000000000 00000001590b2850 00000001590b1d30
   GPR24: 0000000000043d68 000000011ad67a80 000000011ad67a80 0000000000100000
   GPR28: c000000012e1c300 c0000000020271c8 0000000000000001 c0080000081bf608
   NIP [c0080000081b4a90] siw_init_cpulist+0x194/0x214 [siw]
   LR [c0080000081b4a2c] siw_init_cpulist+0x130/0x214 [siw]
   Call Trace:
   [c000000027fa7a50] [c0080000081b4a2c] siw_init_cpulist+0x130/0x214 [siw] (unreliable)
   [c000000027fa7a90] [c0080000081b4e68] siw_init_module+0x40/0x2a0 [siw]
   [c000000027fa7b30] [c0000000000124f4] do_one_initcall+0x84/0x2e0
   [c000000027fa7c00] [c000000000267ffc] do_init_module+0x7c/0x350
   [c000000027fa7c90] [c00000000026a180] __do_sys_init_module+0x210/0x250
   [c000000027fa7db0] [c0000000000387e4] system_call_exception+0x134/0x230
   [c000000027fa7e10] [c00000000000d660] system_call_common+0xf0/0x27c
   Instruction dump:
   40810044 3d420000 e8bf0000 e88a82d0 3d420000 e90a82c8 792a1f24 7cc4302a
   7d2642aa 79291f24 7d25482a 7d295214 <7d4048a8> 7d4a3b78 7d4049ad 40c2fff4

Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface")
Link: https://lore.kernel.org/r/20210201112922.141085-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fixed wrong judgments in the goto branch

[ Upstream commit bb74fe7e81c8b2b65c6a351a247fdb9a969cbaec ]

When an error occurs, the qp_table must be cleared, regardless of whether
the SRQ feature is enabled.

Fixes: 5c1f167af112 ("RDMA/hns: Init SRQ table for hip08")
Link: https://lore.kernel.org/r/1611997090-48820-5-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kselftests: dmabuf-heaps: Fix Makefile's inclusion of the kernel's usr/include dir

[ Upstream commit 64ba3d591c9d2be2a9c09e99b00732afe002ad0d ]

Copied in from somewhere else, the makefile was including
the kerne's usr/include dir, which caused the asm/ioctl.h file
to be used.

Unfortunately, that file has different values for _IOC_SIZEBITS
and _IOC_WRITE than include/uapi/asm-generic/ioctl.h which then
causes the _IOCW macros to give the wrong ioctl numbers,
specifically for DMA_BUF_IOCTL_SYNC.

This patch simply removes the extra include from the Makefile

Cc: Shuah Khan <shuah@kernel.org>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kselftest@vger.kernel.org
Fixes: a8779927fd86c ("kselftests: Add dma-heap test")
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: tool: fix unit test cleanup handling

[ Upstream commit cfd607e43da4a20753744f134e201310262b827a ]

* Stop leaking file objects.
* Use self.addCleanup() to ensure we call cleanup functions even if
setUp() fails.
* use mock.patch.stopall instead of more error-prone manual approach

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-msm8998: Fix Alpha PLL type for all GPLLs

[ Upstream commit 292f75ecff07e8a07fe2e3e19b4b567d0b698842 ]

All of the GPLLs in the MSM8998 Global Clock Controller are Fabia PLLs
and not generic alphas: this was producing bad effects over the entire
clock tree of MSM8998, where any GPLL child clock was declaring a false
clock rate, due to their parent also showing the same.

The issue resides in the calculation of the clock rate for the specific
Alpha PLL type, where Fabia has a different register layout; switching
the MSM8998 GPLLs to the correct Alpha Fabia PLL type fixes the rate
(calculation) reading. While at it, also make these PLLs fixed since
their rate is supposed to *never* be changed while the system runs, as
this would surely crash the entire SoC.

Now all the children of all the PLLs are also complying with their
specified clock table and system stability is improved.

Fixes: b5f5f525c547 ("clk: qcom: Add MSM8998 Global Clock Control (GCC) driver")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210114221059.483390-7-angelogioacchino.delregno@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/8xx: Fix software emulation interrupt

[ Upstream commit 903178d0ce6bb30ef80a3604ab9ee2b57869fbc9 ]

For unimplemented instructions or unimplemented SPRs, the 8xx triggers
a "Software Emulation Exception" (0x1000). That interrupt doesn't set
reason bits in SRR1 as the "Program Check Exception" does.

Go through emulation_assist_interrupt() to set REASON_ILLEGAL.

Fixes: fbbcc3bb139e ("powerpc/8xx: Remove SoftwareEmulation()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ad782af87a222efc79cfb06079b0fd23d4224eaf.1612515180.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries/dlpar: handle ibm, configure-connector delay status

[ Upstream commit 768d70e19ba525debd571b36e6d0ab19956c63d7 ]

dlpar_configure_connector() has two problems in its handling of
ibm,configure-connector's return status:

1. When the status is -2 (busy, call again), we call
   ibm,configure-connector again immediately without checking whether
   to schedule, which can result in monopolizing the CPU.
2. Extended delay status (9900..9905) goes completely unhandled,
   causing the configuration to unnecessarily terminate.

Fix both of these issues by using rtas_busy_delay().

Fixes: ab519a011caa ("powerpc/pseries: Kernel DLPAR Infrastructure")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210107025900.410369-1-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: wm831x-auxadc: Prevent use after free in wm831x_auxadc_read_irq()

[ Upstream commit 26783d74cc6a440ee3ef9836a008a697981013d0 ]

The "req" struct is always added to the "wm831x->auxadc_pending" list,
but it's only removed from the list on the success path.  If a failure
occurs then the "req" struct is freed but it's still on the list,
leading to a use after free.

Fixes: 78bb3688ea18 ("mfd: Support multiple active WM831x AUXADC conversions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: altera-sysmgr: Fix physical address storing more

[ Upstream commit b0b5b16b78cea1b2b990a69ab8e07a42ccf7a2ed ]

A recent fix improved the way the resource gets passed to
the low-level accessors, but left one warning that appears
in configurations with a resource_size_t that is wider than
a pointer:

In file included from drivers/mfd/altera-sysmgr.c:19:
drivers/mfd/altera-sysmgr.c: In function 'sysmgr_probe':
drivers/mfd/altera-sysmgr.c:148:40: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
  148 |   regmap = devm_regmap_init(dev, NULL, (void *)res->start,
      |                                        ^
include/linux/regmap.h:646:6: note: in definition of macro '__regmap_lockdep_wrapper'
  646 |   fn(__VA_ARGS__, &_key,     \
      |      ^~~~~~~~~~~
drivers/mfd/altera-sysmgr.c:148:12: note: in expansion of macro 'devm_regmap_init'
  148 |   regmap = devm_regmap_init(dev, NULL, (void *)res->start,
      |            ^~~~~~~~~~~~~~~~

I had tried a different approach that would store the address
in the private data as a phys_addr_t, but the easiest solution
now seems to be to add a double cast to shut up the warning.

As the address is passed to an inline assembly, it is guaranteed
to not be wider than a register anyway.

Fixes: d9ca7801b6e5 ("mfd: altera-sysmgr: Fix physical address storing hacks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: stm32: properly handle 0 byte transfer

[ Upstream commit 2269f5a8b1a7b38651d62676b98182828f29d11a ]

On 0 byte transfer request, return straight from the
xfer function after finalizing the transfer.

Fixes: dcbe0d84dfa5 ("spi: add driver for STM32 SPI controller")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1612551572-495-2-git-send-email-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Correct skb on loopback path

[ Upstream commit 5120bf0a5fc15dec210a0fe0f39e4a256bb6e349 ]

rxe_net.c sends packets at the IP layer with skb->data pointing at the IP
header but receives packets from a UDP tunnel with skb->data pointing at
the UDP header.  On the loopback path this was not correctly accounted
for.  This patch corrects for this by using sbk_pull() to strip the IP
header from the skb on received packets.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210128182301.16859-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Fix coding error in rxe_rcv_mcast_pkt

[ Upstream commit 8fc1b7027fc162738d5a85c82410e501a371a404 ]

rxe_rcv_mcast_pkt() in rxe_recv.c can leak SKBs in error path code. The
loop over the QPs attached to a multicast group creates new cloned SKBs
for all but the last QP in the list and passes the SKB and its clones to
rxe_rcv_pkt() for further processing. Any QPs that do not pass some checks
are skipped.  If the last QP in the list fails the tests the SKB is
leaked.  This patch checks if the SKB for the last QP was used and if not
frees it. Also removes a redundant loop invariant assignment.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Fixes: 71abf20b28ff ("RDMA/rxe: Handle skb_clone() failure in rxe_recv.c")
Link: https://lore.kernel.org/r/20210128174752.16128-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Fix coding error in rxe_recv.c

[ Upstream commit 7d9ae80e31df57dd3253e1ec514f0000aa588a81 ]

check_type_state() in rxe_recv.c is written as if the type bits in the
packet opcode were a bit mask which is not correct. This patch corrects
this code to compare all 3 type bits to the required type.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210127214500.3707-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf vendor events arm64: Fix Ampere eMag event typo

[ Upstream commit 2bf797be81fa808f05f1a7a65916619132256a27 ]

The "briefdescription" for event 0x35 has a typo - fix it.

Fixes: d35c595bf005 ("perf vendor events arm64: Revise core JSON events for eMAG")
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Nakamura, Shunsuke/中村 俊介 <nakamura.shun@fujitsu.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@openeuler.org
Link: https://lore.kernel.org/r/1611835236-34696-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tools: Fix DSO filtering when not finding a map for a sampled address

[ Upstream commit c69bf11ad3d30b6bf01cfa538ddff1a59467c734 ]

When we lookup an address and don't find a map we should filter that
sample if the user specified a list of --dso entries to filter on, fix
it.

Before:

  $ perf script
             sleep 274800  2843.556162:          1 cycles:u:  ffffffffbb26bff4 [unknown] ([unknown])
             sleep 274800  2843.556168:          1 cycles:u:  ffffffffbb2b047d [unknown] ([unknown])
             sleep 274800  2843.556171:          1 cycles:u:  ffffffffbb2706b2 [unknown] ([unknown])
             sleep 274800  2843.556174:          6 cycles:u:  ffffffffbb2b0267 [unknown] ([unknown])
             sleep 274800  2843.556176:         59 cycles:u:  ffffffffbb2b03b1 [unknown] ([unknown])
             sleep 274800  2843.556180:        691 cycles:u:  ffffffffbb26bff4 [unknown] ([unknown])
             sleep 274800  2843.556189:       9160 cycles:u:      7fa9550eeaa3 __GI___tunables_init+0xf3 (/usr/lib64/ld-2.32.so)
             sleep 274800  2843.556312:      86937 cycles:u:      7fa9550e157b _dl_lookup_symbol_x+0x4b (/usr/lib64/ld-2.32.so)
  $

So we have some samples we somehow didn't find in a map for, if we now
do:

  $ perf report --stdio --dso /usr/lib64/ld-2.32.so
  # dso: /usr/lib64/ld-2.32.so
  #
  # Total Lost Samples: 0
  #
  # Samples: 8  of event 'cycles:u'
  # Event count (approx.): 96856
  #
  # Overhead  Command  Symbol
  # ........  .......  ........................
  #
      89.76%  sleep    [.] _dl_lookup_symbol_x
       9.46%  sleep    [.] __GI___tunables_init
       0.71%  sleep    [k] 0xffffffffbb26bff4
       0.06%  sleep    [k] 0xffffffffbb2b03b1
       0.01%  sleep    [k] 0xffffffffbb2b0267
       0.00%  sleep    [k] 0xffffffffbb2706b2
       0.00%  sleep    [k] 0xffffffffbb2b047d
  $

After this patch we get the right output with just entries for the DSOs
specified in --dso:

  $ perf report --stdio --dso /usr/lib64/ld-2.32.so
  # dso: /usr/lib64/ld-2.32.so
  #
  # Total Lost Samples: 0
  #
  # Samples: 8  of event 'cycles:u'
  # Event count (approx.): 96856
  #
  # Overhead  Command  Symbol
  # ........  .......  ........................
  #
      89.76%  sleep    [.] _dl_lookup_symbol_x
       9.46%  sleep    [.] __GI___tunables_init
  $
  #

Fixes: 96415e4d3f5fdf9c ("perf symbols: Avoid unnecessary symbol loading when dso list is specified")
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210128131209.GD775562@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: zynqmp: depend on HAS_IOMEM

[ Upstream commit ddd0521549a975e6148732d6ca6b89ffa862c0e5 ]

The Xilinx zynqmp RTC driver makes use of IOMEM functions like
devm_platform_ioremap_resource(), which are only available if
CONFIG_HAS_IOMEM is defined.

This causes the driver not to be enable under make ARCH=um allyesconfig,
even though it won't build.

By adding a dependency on HAS_IOMEM, the driver will not be enabled on
architectures which don't support it.

Fixes: 09ef18bcd5ac ("rtc: use devm_platform_ioremap_resource() to simplify code")
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210127035146.1523286-1-davidgow@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracepoint: Do not fail unregistering a probe due to memory failure

[ Upstream commit befe6d946551d65cddbd32b9cb0170b0249fd5ed ]

The list of tracepoint callbacks is managed by an array that is protected
by RCU. To update this array, a new array is allocated, the updates are
copied over to the new array, and then the list of functions for the
tracepoint is switched over to the new array. After a completion of an RCU
grace period, the old array is freed.

This process happens for both adding a callback as well as removing one.
But on removing a callback, if the new array fails to be allocated, the
callback is not removed, and may be used after it is freed by the clients
of the tracepoint.

There's really no reason to fail if the allocation for a new array fails
when removing a function. Instead, the function can simply be replaced by a
stub function that could be cleaned up on the next modification of the
array. That is, instead of calling the function registered to the
tracepoint, it would call a stub function in its place.

Link: https://lore.kernel.org/r/20201115055256.65625-1-mmullins@mmlx.us
Link: https://lore.kernel.org/r/20201116175107.02db396d@gandalf.local.home
Link: https://lore.kernel.org/r/20201117211836.54acaef2@oasis.local.home
Link: https://lkml.kernel.org/r/20201118093405.7a6d2290@gandalf.local.home
[ Note, this version does use undefined compiler behavior (assuming that
  a stub function with no parameters or return, can be called by a location
  that thinks it has parameters but still no return value. Static calls
  do the same thing, so this trick is not without precedent.

  There's another solution that uses RCU tricks and is more complex, but
  can be an alternative if this solution becomes an issue.

Link: https://lore.kernel.org/lkml/20210127170721.58bce7cc@gandalf.local.home/
]

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: netdev <netdev@vger.kernel.org>
Cc: bpf <bpf@vger.kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Florian Weimer <fw@deneb.enyo.de>
Fixes: 97e1c18e8d17b ("tracing: Kernel Tracepoints")
Reported-by: syzbot+83aa762ef23b6f0d1991@syzkaller.appspotmail.com
Reported-by: syzbot+d29e58bb557324e55e5e@syzkaller.appspotmail.com
Reported-by: Matt Mullins <mmullins@mmlx.us>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tested-by: Matt Mullins <mmullins@mmlx.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/cm: Avoid a loop when device has 255 ports

[ Upstream commit 131be26750379592f0dd6244b2a90bbb504a10bb ]

When RDMA device has 255 ports, loop iterator i overflows.  Due to which
cm_add_one() port iterator loops infinitely.  Use core provided port
iterator to avoid the infinite loop.

Fixes: a977049dacde ("[PATCH] IB: Add the kernel CM implementation")
Link: https://lore.kernel.org/r/20210127150010.1876121-9-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mlx5: Return appropriate error code instead of ENOMEM

[ Upstream commit d286ac1d05210695c312b9018b3aa7c2048e9aca ]

When mlx5_ib_stage_init_init() fails, return the error code related to
failure instead of -ENOMEM.

Fixes: 16c1975f1032 ("IB/mlx5: Create profile infrastructure to add and remove stages")
Link: https://lore.kernel.org/r/20210127150010.1876121-8-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu: Properly pass gfp_t in _iommu_map() to avoid atomic sleeping

[ Upstream commit b8437a3ef8c485903d05d1f261328aaf0c0a6cc2 ]

Sleeping while atomic = bad.  Let's fix an obvious typo to try to avoid it.

The warning that was seen (on a downstream kernel with the problematic
patch backported):

 BUG: sleeping function called from invalid context at mm/page_alloc.c:4726
 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9, name: ksoftirqd/0
 CPU: 0 PID: 9 Comm: ksoftirqd/0 Not tainted 5.4.93-12508-gc10c93e28e39 #1
 Call trace:
  dump_backtrace+0x0/0x154
  show_stack+0x20/0x2c
  dump_stack+0xa0/0xfc
  ___might_sleep+0x11c/0x12c
  __might_sleep+0x50/0x84
  __alloc_pages_nodemask+0xf8/0x2bc
  __arm_lpae_alloc_pages+0x48/0x1b4
  __arm_lpae_map+0x124/0x274
  __arm_lpae_map+0x1cc/0x274
  arm_lpae_map+0x140/0x170
  arm_smmu_map+0x78/0xbc
  __iommu_map+0xd4/0x210
  _iommu_map+0x4c/0x84
  iommu_map_atomic+0x44/0x58
  __iommu_dma_map+0x8c/0xc4
  iommu_dma_map_page+0xac/0xf0

Fixes: d8c1df02ac7f ("iommu: Move iotlb_sync_map out from __iommu_map")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210201170611.1.I64a7b62579287d668d7c89e105dcedf45d641063@changeid
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu: Move iotlb_sync_map out from __iommu_map

[ Upstream commit d8c1df02ac7f2c802a9b2afc0f5c888c4217f1d5 ]

In the end of __iommu_map, It alway call iotlb_sync_map.

This patch moves iotlb_sync_map out from __iommu_map since it is
unnecessary to call this for each sg segment especially iotlb_sync_map
is flush tlb all currently. Add a little helper _iommu_map for this.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210107122909.16317-2-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amba: Fix resource leak for drivers without .remove

[ Upstream commit de5d7adb89367bbc87b4e5ce7afe7ae9bd86dc12 ]

Consider an amba driver with a .probe but without a .remove callback (e.g.
pl061_gpio_driver). The function amba_probe() is called to bind a device
and so dev_pm_domain_attach() and others are called. As there is no remove
callback amba_remove() isn't called at unbind time however and so calling
dev_pm_domain_detach() is missed and the pm domain keeps active.

To fix this always use the core driver callbacks and handle missing amba
callbacks there. For probe refuse registration as a driver without probe
doesn't make sense.

Fixes: 7cfe249475fd ("ARM: AMBA: Add pclk support to AMBA bus infrastructure")
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210126165835.687514-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: qcom-geni: Store DMA mapping data in geni_i2c_dev struct

[ Upstream commit 357ee8841d0b7bd822f25fc768afbc0c2ab7e47b ]

Store DMA mapping data in geni_i2c_dev struct to enhance DMA mapping
data scope. For example during shutdown callback to unmap DMA mapping,
this stored DMA mapping data can be used to call geni_se_tx_dma_unprep
and geni_se_rx_dma_unprep functions.

Add two helper functions geni_i2c_rx_msg_cleanup and
geni_i2c_tx_msg_cleanup to unwrap the things after rx/tx FIFO/DMA
transfers, so that the same can be used in geni_i2c_stop_xfer()
function during shutdown callback.

Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Reviewed-by: Akash Asthana <akashast@codeaurora.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores

[ Upstream commit 2acb909750431030b65a0a2a17fd8afcbd813a84 ]

It was observed that decompressor running on hardware implementing ARM v8.2
Load/Store Multiple Atomicity and Ordering Control (LSMAOC), say, as guest,
would stuck just after:

Uncompressing Linux... done, booting the kernel.

The reason is that it clears nTLSMD bit when disabling caches:

  nTLSMD, bit [3]

  When ARMv8.2-LSMAOC is implemented:

    No Trap Load Multiple and Store Multiple to
    Device-nGRE/Device-nGnRE/Device-nGnRnE memory.

    0b0 All memory accesses by A32 and T32 Load Multiple and Store
        Multiple at EL1 or EL0 that are marked at stage 1 as
        Device-nGRE/Device-nGnRE/Device-nGnRnE memory are trapped and
        generate a stage 1 Alignment fault.

    0b1 All memory accesses by A32 and T32 Load Multiple and Store
        Multiple at EL1 or EL0 that are marked at stage 1 as
        Device-nGRE/Device-nGnRE/Device-nGnRnE memory are not trapped.

  This bit is permitted to be cached in a TLB.

  This field resets to 1.

  Otherwise:

  Reserved, RES1

So as effect we start getting traps we are not quite ready for.

Looking into history it seems that mask used for SCTLR clear came from
the similar code for ARMv4, where bit[3] is the enable/disable bit for
the write buffer. That not applicable to ARMv7 and onwards, so retire
that bit from the masks.

Fixes: 7d09e85448dfa78e3e58186c934449aaf6d49b50 ("[ARM] 4393/2: ARMv7: Add uncompressing code for the new CPU Id format")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: renesas_sdhi_internal_dmac: Fix DMA buffer alignment from 8 to 128-bytes

[ Upstream commit d7aefb2887601cf1fc3f86f55d43b2c9aece5e8f ]

According to the latest datasheet, the internal DMAC buffer alignment
R-Car Gen3 SDHI HW should be 128-bytes. So, fix it.

Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
[shimoda: revise commit description, rebase]
Fixes: 2a68ea7896e3 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/1608114572-1892-2-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: usdhi6rol0: Fix a resource leak in the error handling path of the probe

[ Upstream commit 6052b3c370fb82dec28bcfff6d7ec0da84ac087a ]

A call to 'ausdhi6_dma_release()' to undo a previous call to
'usdhi6_dma_request()' is missing in the error handling path of the probe
function.

It is already present in the remove function.

Fixes: 75fa9ea6e3c0 ("mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201217210922.165340-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci-sprd: Fix some resource leaks in the remove function

[ Upstream commit c9c256a8b0dc09c305c409d6264cc016af2ba38d ]

'sdhci_remove_host()' and 'sdhci_pltfm_free()' should be used in place of
'mmc_remove_host()' and 'mmc_free_host()'.

This avoids some resource leaks, is more in line with the error handling
path of the probe function, and is more consistent with other drivers.

Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Orson Zhai <orson.zhai@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20201217204236.163446-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: owl-mmc: Fix a resource leak in an error handling path and in the remove function

[ Upstream commit 5d15cbf63515c6183d2ed7c9dd0586b4db23ffb1 ]

'dma_request_chan()' calls should be balanced by a corresponding
'dma_release_channel()' call.

Add the missing call both in the error handling path of the probe function
and in the remove function.

Fixes: ff65ffe46d28 ("mmc: Add Actions Semi Owl SoCs SD/MMC driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201209194202.54099-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/time: Enable sched clock for irqtime

[ Upstream commit b709e32ef570b8b91dfbcb63cffac4324c87799f ]

When CONFIG_IRQ_TIME_ACCOUNTING and CONFIG_VIRT_CPU_ACCOUNTING_GEN, powerpc
does not enable "sched_clock_irqtime" and can not utilize irq time
accounting.

Like x86, powerpc does not use the sched_clock_register() interface. So it
needs an dedicated call to enable_sched_clock_irqtime() to enable irq time
accounting.

Fixes: 518470fe962e ("powerpc: Add HAVE_IRQ_TIME_ACCOUNTING")
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
[mpe: Add fixes tag]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1603349479-26185-1-git-send-email-kernelfans@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/47x: Disable 256k page size

[ Upstream commit 910a0cb6d259736a0c86e795d4c2f42af8d0d775 ]

PPC47x_TLBE_SIZE isn't defined for 256k pages, leading to a build
break if 256k pages is selected.

So change the kconfig so that 256k pages can't be selected for 47x.

Fixes: e7f75ad01d59 ("powerpc/47x: Base ppc476 support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Expand change log to mention build break]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2fed79b1154c872194f98bac4422c23918325e61.1611128938.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Make the VMX instruction emulation routines static

[ Upstream commit 9236f57a9e51c72ce426ccd2e53e123de7196a0f ]

These are only used locally. It fixes these W=1 compile errors :

../arch/powerpc/kvm/powerpc.c:1521:5: error: no previous prototype for ‘kvmppc_get_vmx_dword’ [-Werror=missing-prototypes]
 1521 | int kvmppc_get_vmx_dword(struct kvm_vcpu *vcpu, int index, u64 *val)
      |     ^~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1539:5: error: no previous prototype for ‘kvmppc_get_vmx_word’ [-Werror=missing-prototypes]
 1539 | int kvmppc_get_vmx_word(struct kvm_vcpu *vcpu, int index, u64 *val)
      |     ^~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1557:5: error: no previous prototype for ‘kvmppc_get_vmx_hword’ [-Werror=missing-prototypes]
 1557 | int kvmppc_get_vmx_hword(struct kvm_vcpu *vcpu, int index, u64 *val)
      |     ^~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1575:5: error: no previous prototype for ‘kvmppc_get_vmx_byte’ [-Werror=missing-prototypes]
 1575 | int kvmppc_get_vmx_byte(struct kvm_vcpu *vcpu, int index, u64 *val)
      |     ^~~~~~~~~~~~~~~~~~~

Fixes: acc9eb9305fe ("KVM: PPC: Reimplement LOAD_VMX/STORE_VMX instruction mmio emulation with analyse_instr() input")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-19-clg@kaod.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/umad: Return EPOLLERR in case of when device disassociated

[ Upstream commit def4cd43f522253645b72c97181399c241b54536 ]

Currently, polling a umad device will always works, even if the device was
disassociated. A disassociated device should immediately return EPOLLERR
from poll(). Otherwise userspace is endlessly hung on poll() with no idea
that the device has been removed from the system.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/20210125121339.837518-3-leon@kernel.org
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/umad: Return EIO in case of when device disassociated

[ Upstream commit 4fc5461823c9cad547a9bdfbf17d13f0da0d6bb5 ]

MAD message received by the user has EINVAL error in all flows
including when the device is disassociated. That makes it impossible
for the applications to treat such flow differently.

Change it to return EIO, so the applications will be able to perform
disassociation recovery.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/20210125121339.837518-2-leon@kernel.org
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu: Switch gather->end to the inclusive end

[ Upstream commit 862c3715de8f3e5350489240c951d697f04bd8c9 ]

Currently gather->end is "unsigned long" which may be overflow in
arch32 in the corner case: 0xfff00000 + 0x100000(iova + size).
Although it doesn't affect the size(end - start), it affects the checking
"gather->end < end"

This patch changes this "end" to the real end address
(end = start + size - 1). Correspondingly, update the length to
"end - start + 1".

Fixes: a7d20dc19d9e ("iommu: Introduce struct iommu_iotlb_gather for batching TLB flushes")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210107122909.16317-5-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix ancient double free

[ Upstream commit 0be310979e5e1272d4c5b557642df4da4ce7eba4 ]

The "pmb" pointer is freed at the start of the function and then freed
again in the error handling code.

Link: https://lore.kernel.org/r/YA6E8rO51hE56SVw@mwanda
Fixes: 92d7f7b0cde3 ("[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

objtool: Fix ".cold" section suffix check for newer versions of GCC

[ Upstream commit 34ca59e109bdf69704c33b8eeffaa4c9f71076e5 ]

With my version of GCC 9.3.1 the ".cold" subfunctions no longer have a
numbered suffix, so the trailing period is no longer there.

Presumably this doesn't yet trigger a user-visible bug since most of the
subfunction detection logic is duplicated.   I only found it when
testing vmlinux.o validation.

Fixes: 54262aa28301 ("objtool: Fix sibling call detection")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/ca0b5a57f08a2fbb48538dd915cc253b5edabb40.1611263461.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

objtool: Fix retpoline detection in asm code

[ Upstream commit 1f9a1b74942485a0a29e7c4a9a9f2fe8aea17766 ]

The JMP_NOSPEC macro branches to __x86_retpoline_*() rather than the
__x86_indirect_thunk_*() wrappers used by C code.  Detect jumps to
__x86_retpoline_*() as retpoline dynamic jumps.

Presumably this doesn't trigger a user-visible bug.  I only found it
when testing vmlinux.o validation.

Fixes: 39b735332cb8 ("objtool: Detect jumps to retpoline thunks")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/31f5833e2e4f01e3d755889ac77e3661e906c09f.1611263461.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

objtool: Fix error handling for STD/CLD warnings

[ Upstream commit 6f567c9300a5ebd7b18c26dda1c8d6ffbdd0debd ]

Actually return an error (and display a backtrace, if requested) for
directional bit warnings.

Fixes: 2f0f9e9ad7b3 ("objtool: Add Direction Flag validation")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/dc70f2adbc72f09526f7cab5b6feb8bf7f6c5ad4.1611263461.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

auxdisplay: ht16k33: Fix refresh rate handling

[ Upstream commit e89b0a426721a8ca5971bc8d70aa5ea35c020f90 ]

Drop the call to msecs_to_jiffies(), as "HZ / fbdev->refresh_rate" is
already the number of jiffies to wait.

Fixes: 8992da44c6805d53 ("auxdisplay: ht16k33: Driver for LED controller")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: intel-mid_wdt: Postpone IRQ handler registration till SCU is ready

[ Upstream commit f285c9532b5bd3de7e37a6203318437cab79bd9a ]

When SCU is not ready and CONFIG_DEBUG_SHIRQ=y we got deferred probe followed
by fired test IRQ which immediately makes kernel panic. Fix this by delaying
IRQ handler registration till SCU is ready.

Fixes: 80ae679b8f86 ("watchdog: intel-mid_wdt: Convert to use new SCU IPC API")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

isofs: release buffer head before return

[ Upstream commit 0a6dc67a6aa45f19bd4ff89b4f468fc50c4b8daa ]

Release the buffer_head before returning error code in
do_isofs_readdir() and isofs_find_entry().

Fixes: 2deb1acc653c ("isofs: fix access to unallocated memory when reading corrupted filesystem")
Link: https://lore.kernel.org/r/20210118120455.118955-1-bianpan2016@163.com
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: core: Avoid debugfs: Directory ... already present! error

[ Upstream commit dbe954d8f1635f949a1d9a5d6e6fb749ae022b47 ]

Sometimes regulator_get() gets called twice for the same supply on the
same device. This may happen e.g. when a framework / library is used
which uses the regulator; and the driver itself also needs to enable
the regulator in some cases where the framework will not enable it.

Commit ff268b56ce8c ("regulator: core: Don't spew backtraces on
duplicate sysfs") already takes care of the backtrace which would
trigger when creating a duplicate consumer symlink under
/sys/class/regulator/regulator.%d in this scenario.

Commit c33d442328f5 ("debugfs: make error message a bit more verbose")
causes a new error to get logged in this scenario:

[   26.938425] debugfs: Directory 'wm5102-codec-MICVDD' with parent 'spi-WM510204:00-MICVDD' already present!

There is no _nowarn variant of debugfs_create_dir(), but we can detect
and avoid this problem by checking the return value of the earlier
sysfs_create_link_nowarn() call.

Add a check for the earlier sysfs_create_link_nowarn() failing with
-EEXIST and skip the debugfs_create_dir() call in that case, avoiding
this error getting logged.

Fixes: c33d442328f5 ("debugfs: make error message a bit more verbose")
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210122183250.370571-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: smb347-charger: Fix interrupt usage if interrupt is unavailable

[ Upstream commit 6996312642d2dad3070c3d276c7621f35e721f30 ]

The IRQ=0 could be a valid interrupt number in kernel because interrupt
numbers are virtual in a modern kernel. Hence fix the interrupt usage in
a case if interrupt is unavailable by not overriding the interrupt number
which is used by the driver.

Note that currently Nexus 7 is the only know device which uses SMB347
kernel diver and it has a properly working interrupt, hence this patch
doesn't fix any real problems, it's a minor cleanup/improvement.

Fixes: 99298de5df92 ("power: supply: smb347-charger: Replace mutex with IRQ disable/enable")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: axp20x_usb_power: Init work before enabling IRQs

[ Upstream commit b5e8642ed95ff6ecc20cc6038fe831affa9d098c ]

The IRQ handler calls mod_delayed_work() on power->vbus_detect. However,
that work item is not initialized until after the IRQs are enabled. If
an IRQ is already pending when the driver is probed, the driver calls
mod_delayed_work() on an uninitialized work item, which causes an oops.

Fixes: bcfb7ae3f50b ("power: supply: axp20x_usb_power: Only poll while offline")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: s5m8767: Drop regulators OF node reference

[ Upstream commit a5872bd3398d0ff2ce4c77794bc7837899c69024 ]

The device node reference obtained with of_get_child_by_name() should be
dropped on error paths.

Fixes: 26aec009f6b6 ("regulator: add device tree support for s5m8767")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210121155914.48034-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: atmel: Put allocated master before return

[ Upstream commit 21ea2743f015dbacec1831bdc8afc848db9c2b8c ]

The allocated master is not released. Goto error handling label rather
than directly return.

Fixes: 5e9af37e46bc ("spi: atmel: introduce probe deferring")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Fixes: 5e9af37e46bc ("spi: atmel: introduce probe deferring")
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20210120050025.25426-1-bianpan2016@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: s5m8767: Fix reference count leak

[ Upstream commit dea6dd2ba63f8c8532addb8f32daf7b89a368a42 ]

Call of_node_put() to drop references of regulators_np and reg_np before
returning error code.

Fixes: 9ae5cc75ceaa ("regulator: s5m8767: Pass descriptor instead of GPIO number")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210121032756.49501-1-bianpan2016@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

certs: Fix blacklist flag type confusion

[ Upstream commit 4993e1f9479a4161fd7d93e2b8b30b438f00cb0f ]

KEY_FLAG_KEEP is not meant to be passed to keyring_alloc() or key_alloc(),
as these only take KEY_ALLOC_* flags.  KEY_FLAG_KEEP has the same value as
KEY_ALLOC_BYPASS_RESTRICTION, but fortunately only key_create_or_update()
uses it.  LSMs using the key_alloc hook don't check that flag.

KEY_FLAG_KEEP is then ignored but fortunately (again) the root user cannot
write to the blacklist keyring, so it is not possible to remove a key/hash
from it.

Fix this by adding a KEY_ALLOC_SET_KEEP flag that tells key_alloc() to set
KEY_FLAG_KEEP on the new key.  blacklist_init() can then, correctly, pass
this to keyring_alloc().

We can also use this in ima_mok_init() rather than setting the flag
manually.

Note that this doesn't fix an observable bug with the current
implementation but it is required to allow addition of new hashes to the
blacklist in the future without making it possible for them to be removed.

Fixes: 734114f8782f ("KEYS: Add a system blacklist keyring")
Reported-by: Mickaël Salaün <mic@linux.microsoft.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Mickaël Salaün <mic@linux.microsoft.com>
cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watch_queue: Drop references to /dev/watch_queue

[ Upstream commit 8fe62e0c0e2efa5437f3ee81b65d69e70a45ecd2 ]

The merged API doesn't use a watch_queue device, but instead relies on
pipes, so let the documentation reflect that.

Fixes: f7e47677e39a ("watch_queue: Add a key/keyring notification facility")
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: axp20x: Fix reference cout leak

[ Upstream commit e78bf6be7edaacb39778f3a89416caddfc6c6d70 ]

Decrements the reference count of device node and its child node.

Fixes: dfe7a1b058bb ("regulator: AXP20x: Add support for regulators subsystem")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210120123313.107640-1-bianpan2016@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/chrome: cros_ec_proto: Add LID and BATTERY to default mask

[ Upstream commit 852405d8efcbca0e02f14592fb1d1dcd0d3fb508 ]

After 'platform/chrome: cros_ec_proto: Use EC_HOST_EVENT_MASK not BIT'
some of the flags are not quite correct.
LID_CLOSED is used to suspend the device, so it makes sense to ignore that.
BATTERY events are also frequent and causing spurious wakes on elm/hana
mt8173 devices.

Fixes: c214e564acb2 ("platform/chrome: cros_ec_proto: ignore unnecessary wakeups on old ECs")
Signed-off-by: Evan Benn <evanbenn@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201209220306.2.I3291bf83e4884c206b097ede34780e014fa3e265@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/chrome: cros_ec_proto: Use EC_HOST_EVENT_MASK not BIT

[ Upstream commit 0944ea07baa748741563c8842122010fa9017d16 ]

The host_event_code enum is 1-based, use EC_HOST_EVENT_MASK not BIT to
generate the intended mask. This patch changes the behaviour of the
mask, a following patch will restore the intended behaviour:
'Add LID and BATTERY to default mask'

Fixes: c214e564acb2 ("platform/chrome: cros_ec_proto: ignore unnecessary wakeups on old ECs")
Signed-off-by: Evan Benn <evanbenn@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201209220306.1.I6133572c0ab3c6b95426f804bac2d3833e24acb1@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi-ng: h6: Fix clock divider range on some clocks

[ Upstream commit 04ef679591c76571a9e7d5ca48316cc86fa0ef12 ]

While comparing clocks between the H6 and H616, some of the M factor
ranges were found to be wrong: the manual says they are only covering
two bits [1:0], but our code had "5" in the number-of-bits field.

By writing 0xff into that register in U-Boot and via FEL, it could be
confirmed that bits [4:2] are indeed masked off, so the manual is right.

Change to number of bits in the affected clock's description.

Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210118000912.28116-1-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mlx5: Add mutex destroy call to cap_mask_mutex mutex

[ Upstream commit ab40530a2e0a7aca9a5187824c4fb072f3916e85 ]

mutex_destroy() call for device's cap_mask_mutex mutex is missing, let's
add it to annotate destruction.

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/20210113121703.559778-4-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mlx5: Use the correct obj_id upon DEVX TIR creation

[ Upstream commit 8798e4ad0abe0ba1221928a46561981c510be0c6 ]

Use the correct obj_id upon DEVX TIR creation by strictly taking the tirn
24 bits and not the general obj_id which is 32 bits.

Fixes: 7efce3691d33 ("IB/mlx5: Add obj create and destroy functionality")
Link: https://lore.kernel.org/r/20201230130121.180350-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: imx: Don't print error on -EPROBEDEFER

[ Upstream commit 8346633f2c87713a1852d802305e03555e9a9fce ]

This avoids

[    0.962538] spi_imx 30820000.spi: bitbang start failed with -517

durig driver probe.

Fixes: 8197f489f4c4 ("spi: imx: Fix failure path leak on GPIO request error correctly")
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/0f51ab42e7c7a3452f2f8652794d81584303ea0d.1610987414.git.agx@sigxcpu.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/mxs_timer: Add missing semicolon when DEBUG is defined

[ Upstream commit 7da390694afbaed8e0f05717a541dfaf1077ba51 ]

When DEBUG is defined this error occurs

drivers/clocksource/mxs_timer.c:138:1: error:
  expected ‘;’ before ‘}’ token

The preceding statement needs a semicolon.
Replace pr_info() with pr_debug() and remove the unneeded ifdef.

Fixes: eb8703e2ef7c ("clockevents/drivers/mxs: Migrate to new 'set-state' interface")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210118211955.763609-1-trix@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/ixp4xx: Select TIMER_OF when needed

[ Upstream commit 7a3b8758bd6e45f7b671723b5c9fa2b69d0787ae ]

Compile-testing the ixp4xx timer with CONFIG_OF enabled but
CONFIG_TIMER_OF disabled leads to a harmless warning:

arm-linux-gnueabi-ld: warning: orphan section `__timer_of_table' from `drivers/clocksource/timer-ixp4xx.o' being placed in section `__timer_of_table'

Move the select statement from the platform code into the driver
so it always gets enabled in configurations that rely on it.

Fixes: 40df14cc5cc0 ("clocksource/drivers/ixp4xx: Add OF initialization support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210103135955.3808976-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: fix sbs-charger build, needs REGMAP_I2C

[ Upstream commit a4bdea2004b28f47ab48ea99172eda8628f6fb44 ]

CHARGER_SBS should select REGMAP_I2C since it uses API(s) that are
provided by that Kconfig symbol.

Fixes these errors:

../drivers/power/supply/sbs-charger.c:149:21: error: variable ‘sbs_regmap’ has initializer but incomplete type
 static const struct regmap_config sbs_regmap = {
../drivers/power/supply/sbs-charger.c:150:3: error: ‘const struct regmap_config’ has no member named ‘reg_bits’
  .reg_bits = 8,
../drivers/power/supply/sbs-charger.c:155:23: error: ‘REGMAP_ENDIAN_LITTLE’ undeclared here (not in a function)
  .val_format_endian = REGMAP_ENDIAN_LITTLE, /* since based on SMBus */
../drivers/power/supply/sbs-charger.c: In function ‘sbs_probe’:
../drivers/power/supply/sbs-charger.c:183:17: error: implicit declaration of function ‘devm_regmap_init_i2c’; did you mean ‘devm_request_irq’? [-Werror=implicit-function-declaration]
  chip->regmap = devm_regmap_init_i2c(client, &sbs_regmap);
../drivers/power/supply/sbs-charger.c: At top level:
../drivers/power/supply/sbs-charger.c:149:35: error: storage size of ‘sbs_regmap’ isn’t known
 static const struct regmap_config sbs_regmap = {

Fixes: feb583e37f8a ("power: supply: add sbs-charger driver")
Reported-by: Martin Mokrejs <mmokrejs@fold.natur.cuni.cz>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Martin Mokrejs <mmokrejs@fold.natur.cuni.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: set DMA channel to be private

[ Upstream commit c06e424be5f5184468c5f761c0d2cf1ed0a4e0fc ]

Add DMA_PRIVATE attribute flag to idxd DMA channels. The dedicated WQs are
expected to be used by a single client and not shared. While doing NTB
testing this mistake was discovered, which prevented ntb_transport from
requesting DSA wqs as DMA channels via dma_request_channel().

Reported-by: Srinijia Kambham <srinija.kambham@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Srinijia Kambham <srinija.kambham@intel.com>
Fixes: 8f47d1a5e545 ("dmaengine: idxd: connect idxd to dmaengine subsystem")
Link: https://lore.kernel.org/r/161074758743.2184057.3388557138816350980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: s5m: select REGMAP_I2C

[ Upstream commit 1f0cbda3b452b520c5f3794f8f0e410e8bc7386a ]

The rtc-s5m uses the I2C regmap but doesn't select it in Kconfig so
depending on the configuration the build may fail. Fix it.

Fixes: 959df7778bbd ("rtc: Enable compile testing for Maxim and Samsung drivers")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210114102219.23682-2-brgl@bgdev.pl
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: reset: at91-sama5d2_shdwc: fix wkupdbc mask

[ Upstream commit 95aa21a3f1183260db1b0395e03df5bebc5ed641 ]

According to datasheet WKUPDBC mask is b/w bits 26..24.

Fixes: f80cb48843987 ("power: reset: at91-shdwc: add new shutdown controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs-srv: Init wr_cnt as 1

[ Upstream commit 6f5d1b3016d650f351e65c645a5eee5394547dd0 ]

Fix up wr_avail accounting. if wr_cnt is 0, then we do SIGNAL for first
wr, in completion we add queue_depth back, which is not right in the
sense of tracking for available wr.

So fix it by init wr_cnt to 1.

Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-19-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs-clt: Refactor the failure cases in alloc_clt

[ Upstream commit eab098246625e91c1cbd6e8f75b09e4c9c28a9fc ]

Make all failure cases go to the common path to avoid duplicate code.
And some issued existed before.

1. clt need to be freed to avoid memory leak.

2. return ERR_PTR(-ENOMEM) if kobject_create_and_add fails, because
   rtrs_clt_open checks the return value of by call "IS_ERR(clt)".

Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-15-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs-srv: Fix missing wr_cqe

[ Upstream commit 8537f2de6519945890a2b0f3739b23f32b5c0a89 ]

We had a few places wr_cqe is not set, which could lead to NULL pointer
deref or GPF in error case.

Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-14-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs: Call kobject_put in the failure path

[ Upstream commit 424774c9f3fa100ef7d9cfb9ee211e2ba1cd5119 ]

Per the comment of kobject_init_and_add, we need to free the memory
by call kobject_put.

Fixes: 215378b838df ("RDMA/rtrs: client: sysfs interface functions")
Fixes: 91b11610af8d ("RDMA/rtrs: server: sysfs interface functions")
Link: https://lore.kernel.org/r/20201217141915.56989-8-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs-clt: Set mininum limit when create QP

[ Upstream commit f47e4e3e71724f625958b0059f6c8ac5d44d27ef ]

Currently rtrs when create_qp use a coarse numbers (bigger in general),
which leads to hardware create more resources which only waste memory
with no benefits.

- SERVICE con,
For max_send_wr/max_recv_wr, it's 2 times SERVICE_CON_QUEUE_DEPTH + 2

- IO con
For max_send_wr/max_recv_wr, it's sess->queue_depth * 3 + 1

Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-6-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs-srv: Use sysfs_remove_file_self for disconnect

[ Upstream commit f991fdac813f1598a9bb17b602ce04812ba9148c ]

Remove self first to avoid deadlock, we don't want to
use close_work to remove sess sysfs.

Fixes: 91b11610af8d ("RDMA/rtrs: server: sysfs interface functions")
Link: https://lore.kernel.org/r/20201217141915.56989-5-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Tested-by: Lutz Pogrell <lutz.pogrell@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs-srv: Release lock before call into close_sess

[ Upstream commit 99f0c3807973359bba8f37d9198eea59fe38c32a ]

In this error case, we don't need hold mutex to call close_sess.

Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-4-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Tested-by: Lutz Pogrell <lutz.pogrell@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs: Extend ibtrs_cq_qp_create

[ Upstream commit 7490fd1fe836ba3c7eda7a4b1cfd9e44389ffda5 ]

rtrs does not have same limit for both max_send_wr and max_recv_wr,
To allow client and server set different values, export in a separate
parameter for rtrs_cq_qp_create.

Also fix the type accordingly, u32 should be used instead of u16.

Fixes: c0894b3ea69d ("RDMA/rtrs: core: lib functions shared between client and server modules")
Link: https://lore.kernel.org/r/20201217141915.56989-2-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of/fdt: Make sure no-map does not remove already reserved regions

[ Upstream commit 8a5a75e5e9e55de1cef5d83ca3589cb4899193ef ]

If the device tree is incorrectly configured, and attempts to
define a "no-map" reserved memory that overlaps with the kernel
data/code, the kernel would crash quickly after boot, with no
obvious clue about the nature of the issue.

For example, this would happen if we have the kernel mapped at
these addresses (from /proc/iomem):
40000000-41ffffff : System RAM
  40080000-40dfffff : Kernel code
  40e00000-411fffff : reserved
  41200000-413e0fff : Kernel data

And we declare a no-map shared-dma-pool region at a fixed address
within that range:
mem_reserved: mem_region {
compatible = "shared-dma-pool";
reg = <0 0x40000000 0 0x01A00000>;
no-map;
};

To fix this, when removing memory regions at early boot (which is
what "no-map" regions do), we need to make sure that the memory
is not already reserved. If we do, __reserved_mem_reserve_reg
will throw an error:
[    0.000000] OF: fdt: Reserved memory: failed to reserve memory
   for node 'mem_region': base 0x0000000040000000, size 26 MiB
and the code that will try to use the region should also fail,
later on.

We do not do anything for non-"no-map" regions, as memblock
explicitly allows reserved regions to overlap, and the commit
that this fixes removed the check for that precise reason.

[ qperret: fixed conflicts caused by the usage of memblock_mark_nomap ]

Fixes: 094cb98179f19b7 ("of/fdt: memblock_reserve /memreserve/ regions in the case of partial overlap")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20210115114544.1830068-3-qperret@google.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fdt: Properly handle "no-map" field in the memory region

[ Upstream commit 86588296acbfb1591e92ba60221e95677ecadb43 ]

Mark the memory region with NOMAP flag instead of completely removing it
from the memory blocks. That makes the FDT handling consistent with the EFI
memory map handling.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20210115114544.1830068-2-qperret@google.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: cpcap-charger: Fix power_supply_put on null battery pointer

[ Upstream commit 39196cfe10dd2b46ee28b44abbc0db4f4cb7822f ]

Currently if the pointer battery is null there is a null pointer
dereference on the call to power_supply_put.  Fix this by only
performing the put if battery is not null.

Addresses-Coverity: ("Dereference after null check")
Fixes: 4bff91bb3231 ("power: supply: cpcap-charger: Fix missing power_supply_put()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: cpcap-battery: Fix missing power_supply_put()

[ Upstream commit 97456a24acb41b74ab6910f40fb8f09b206fd3b5 ]

Fix missing power_supply_put().

Cc: Arthur Demchenkov <spinal.by@gmail.com>
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Fixes: 8b0134cc14b9 ("power: supply: cpcap-battery: Fix handling of lowered charger voltage")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: cpcap-charger: Fix missing power_supply_put()

[ Upstream commit 4bff91bb3231882b530af794c92ac3a5fe199481 ]

Fix missing power_supply_put().

Cc: Arthur Demchenkov <spinal.by@gmail.com>
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Fixes: 5688ea049233 ("power: supply: cpcap-charger: Allow changing constant charge voltage")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: bd9571mwv: Use devm_mfd_add_devices()

[ Upstream commit c58ad0f2b052b5675d6394e03713ee41e721b44c ]

To remove mfd devices when unload this driver, should use
devm_mfd_add_devices() instead.

Fixes: d3ea21272094 ("mfd: Add ROHM BD9571MWV-M MFD PMIC driver")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: hsu: disable spurious interrupt

[ Upstream commit 035b73b2b3b2e074a56489a7bf84b6a8012c0e0d ]

On Intel Tangier B0 and Anniedale the interrupt line, disregarding
to have different numbers, is shared between HSU DMA and UART IPs.
Thus on such SoCs we are expecting that IRQ handler is called in
UART driver only. hsu_pci_irq was handling the spurious interrupt
from HSU DMA by returning immediately. This wastes CPU time and
since HSU DMA and HSU UART interrupt occur simultaneously they race
to be handled causing delay to the HSU UART interrupt handling.
Fix this by disabling the interrupt entirely.

Fixes: 4831e0d9054c ("serial: 8250_mid: handle interrupt correctly in DMA case")
Signed-off-by: Ferry Toth <ftoth@exalondelft.nl>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210112223749.97036-1-ftoth@exalondelft.nl
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: owl-dma: Fix a resource leak in the remove function

[ Upstream commit 1f0a16f04113f9f0ab0c8e6d3abe661edab549e6 ]

A 'dma_pool_destroy()' call is missing in the remove function.
Add it.

This call is already made in the error handling path of the probe function.

Fixes: 47e20577c24d ("dmaengine: Add Actions Semi Owl family S900 DMA driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201212162535.95727-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: fsldma: Fix a resource leak in an error handling path of the probe function

[ Upstream commit b202d4e82531a62a33a6b14d321dd2aad491578e ]

In case of error, the previous 'fsl_dma_chan_probe()' calls must be undone
by some 'fsl_dma_chan_remove()', as already done in the remove function.

It was added in the remove function in commit 77cd62e8082b ("fsldma: allow
Freescale Elo DMA driver to be compiled as a module")

Fixes: d3f620b2c4fe ("fsldma: simplify IRQ probing and handling")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201212160614.92576-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: fsldma: Fix a resource leak in the remove function

[ Upstream commit cbc0ad004c03ad7971726a5db3ec84dba3dcb857 ]

A 'irq_dispose_mapping()' call is missing in the remove function.
Add it.

This is needed to undo the 'irq_of_parse_and_map() call from the probe
function and already part of the error handling path of the probe function.

It was added in the probe function only in commit d3f620b2c4fe ("fsldma:
simplify IRQ probing and handling")

Fixes: 77cd62e8082b ("fsldma: allow Freescale Elo DMA driver to be compiled as a module")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201212160516.92515-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Fix handling of zero-sized Read and Receive Queues.

[ Upstream commit 661f385961f06f36da24cf408d461f988d0c39ad ]

During connection setup, the application may choose to zero-size inbound
and outbound READ queues, as well as the Receive queue.  This patch fixes
handling of zero-sized queues, but not prevents it.

Kamal Heib says in an initial error report:

 When running the blktests over siw the following shift-out-of-bounds is
 reported, this is happening because the passed IRD or ORD from the ulp
 could be zero which will lead to unexpected behavior when calling
 roundup_pow_of_two(), fix that by blocking zero values of ORD or IRD.

   UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
   shift exponent 64 is too large for 64-bit type 'long unsigned int'
   CPU: 20 PID: 3957 Comm: kworker/u64:13 Tainted: G S     5.10.0-rc6 #2
   Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016
   Workqueue: iw_cm_wq cm_work_handler [iw_cm]
   Call Trace:
    dump_stack+0x99/0xcb
    ubsan_epilogue+0x5/0x40
    __ubsan_handle_shift_out_of_bounds.cold.11+0xb4/0xf3
    ? down_write+0x183/0x3d0
    siw_qp_modify.cold.8+0x2d/0x32 [siw]
    ? __local_bh_enable_ip+0xa5/0xf0
    siw_accept+0x906/0x1b60 [siw]
    ? xa_load+0x147/0x1f0
    ? siw_connect+0x17a0/0x17a0 [siw]
    ? lock_downgrade+0x700/0x700
    ? siw_get_base_qp+0x1c2/0x340 [siw]
    ? _raw_spin_unlock_irqrestore+0x39/0x40
    iw_cm_accept+0x1f4/0x430 [iw_cm]
    rdma_accept+0x3fa/0xb10 [rdma_cm]
    ? check_flush_dependency+0x410/0x410
    ? cma_rep_recv+0x570/0x570 [rdma_cm]
    nvmet_rdma_queue_connect+0x1a62/0x2680 [nvmet_rdma]
    ? nvmet_rdma_alloc_cmds+0xce0/0xce0 [nvmet_rdma]
    ? lock_release+0x56e/0xcc0
    ? lock_downgrade+0x700/0x700
    ? lock_downgrade+0x700/0x700
    ? __xa_alloc_cyclic+0xef/0x350
    ? __xa_alloc+0x2d0/0x2d0
    ? rdma_restrack_add+0xbe/0x2c0 [ib_core]
    ? __ww_mutex_die+0x190/0x190
    cma_cm_event_handler+0xf2/0x500 [rdma_cm]
    iw_conn_req_handler+0x910/0xcb0 [rdma_cm]
    ? _raw_spin_unlock_irqrestore+0x39/0x40
    ? trace_hardirqs_on+0x1c/0x150
    ? cma_ib_handler+0x8a0/0x8a0 [rdma_cm]
    ? __kasan_kmalloc.constprop.7+0xc1/0xd0
    cm_work_handler+0x121c/0x17a0 [iw_cm]
    ? iw_cm_reject+0x190/0x190 [iw_cm]
    ? trace_hardirqs_on+0x1c/0x150
    process_one_work+0x8fb/0x16c0
    ? pwq_dec_nr_in_flight+0x320/0x320
    worker_thread+0x87/0xb40
    ? __kthread_parkme+0xd1/0x1a0
    ? process_one_work+0x16c0/0x16c0
    kthread+0x35f/0x430
    ? kthread_mod_delayed_work+0x180/0x180
    ret_from_fork+0x22/0x30

Fixes: a531975279f3 ("rdma/siw: main include file")
Fixes: f29dd55b0236 ("rdma/siw: queue pair methods")
Fixes: 8b6a361b8c48 ("rdma/siw: receive path")
Fixes: b9be6f18cf9e ("rdma/siw: transmit path")
Fixes: 303ae1cdfdf7 ("rdma/siw: application interface")
Link: https://lore.kernel.org/r/20210108125845.1803-1-bmt@zurich.ibm.com
Reported-by: Kamal Heib <kamalheib1@gmail.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: core: detect and skip invalid inputs to snto32()

[ Upstream commit a0312af1f94d13800e63a7d0a66e563582e39aec ]

Prevent invalid (0, 0) inputs to hid-core's snto32() function.

Maybe it is just the dummy device here that is causing this, but
there are hundreds of calls to snto32(0, 0). Having n (bits count)
of 0 is causing the current UBSAN trap with a shift value of
0xffffffff (-1, or n - 1 in this function).

Either of the value to shift being 0 or the bits count being 0 can be
handled by just returning 0 to the caller, avoiding the following
complex shift + OR operations:

return value & (1 << (n - 1)) ? value | (~0U << n) : value;

Fixes: dde5845a529f ("[PATCH] Generic HID layer - code split")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: syzbot+1e911ad71dd4ea72e04a@syzkaller.appspotmail.com
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: renesas: r8a779a0: Fix parent of CBFUSA clock

[ Upstream commit 80d3e07ec509c5098d44e4f1416cc9f133fd436f ]

According to Figure 8.1.1 ("Block Diagram of CPG (R-Car V3U-AD)") in the
R-Car V3U Series User's Manual Rev. 0.5, the parent of the CBFUSA clock
is EXTAL.

Fixes: 17bcc8035d2d19fc ("clk: renesas: cpg-mssr: Add support for R-Car V3U")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20201019120614.22149-3-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: renesas: r8a779a0: Remove non-existent S2 clock

[ Upstream commit 5b30be15ca262d9cb2c36b173bb488e8d1952ea0 ]

The S2 internal core clock does not exist on R-Car V3U. Remove it.

Fixes: 17bcc8035d2d19fc ("clk: renesas: cpg-mssr: Add support for R-Car V3U")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20201019120614.22149-2-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi-ng: h6: Fix CEC clock

[ Upstream commit 756650820abd4770c4200763505b634a3c04e05e ]

The CEC clock on the H6 SoC is a bit special, since it uses a fixed
pre-dividier for one source clock (the PLL), but conveys the other clock
(32K OSC) directly.
We are using a fixed predivider array for that, but fail to use the right
flag to actually activate that.

Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
Reported-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210106143246.11255-1-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>