scsi: lpfc: Cap NPIV vports to 256

[ Upstream commit 8b47ae69e049ae0b3373859d901f0334322f9fe9 ]

Depending on the chipset, the number of NPIV vports may vary and be in
excess of what most switches support (256). To avoid confusion with the
users, limit the reported NPIV vports to 256.

Additionally correct the 16G adapter which is reporting a bogus NPIV vport
number if the link is down.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

omap: pdata-quirks: remove openpandora quirks for mmc3 and wl1251

[ Upstream commit 2398c41d64321e62af54424fd399964f3d48cdc2 ]

With a wl1251 child node of mmc3 in the device tree decoded
in omap_hsmmc.c to handle special wl1251 initialization, we do
no longer need to instantiate the mmc3 through pdata quirks.

We also can remove the wlan regulator and reset/interrupt definitions
and do them through device tree.

Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: <stable@vger.kernel.org> # v4.7+
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Btrfs: fix negative subv_writers counter and data space leak after buffered write

[ Upstream commit a0e248bb502d5165b3314ac3819e888fdcdf7d9f ]

When doing a buffered write it's possible to leave the subv_writers
counter of the root, used for synchronization between buffered nocow
writers and snapshotting. This happens in an exceptional case like the
following:

1) We fail to allocate data space for the write, since there's not
   enough available data space nor enough unallocated space for allocating
   a new data block group;

2) Because of that failure, we try to go to NOCOW mode, which succeeds
   and therefore we set the local variable 'only_release_metadata' to true
   and set the root's sub_writers counter to 1 through the call to
   btrfs_start_write_no_snapshotting() made by check_can_nocow();

3) The call to btrfs_copy_from_user() returns zero, which is very unlikely
   to happen but not impossible;

4) No pages are copied because btrfs_copy_from_user() returned zero;

5) We call btrfs_end_write_no_snapshotting() which decrements the root's
   subv_writers counter to 0;

6) We don't set 'only_release_metadata' back to 'false' because we do
   it only if 'copied', the value returned by btrfs_copy_from_user(), is
   greater than zero;

7) On the next iteration of the while loop, which processes the same
   page range, we are now able to allocate data space for the write (we
   got enough data space released in the meanwhile);

8) After this if we fail at btrfs_delalloc_reserve_metadata(), because
   now there isn't enough free metadata space, or in some other place
   further below (prepare_pages(), lock_and_cleanup_extent_if_need(),
   btrfs_dirty_pages()), we break out of the while loop with
   'only_release_metadata' having a value of 'true';

9) Because 'only_release_metadata' is 'true' we end up decrementing the
   root's subv_writers counter to -1 (through a call to
   btrfs_end_write_no_snapshotting()), and we also end up not releasing the
   data space previously reserved through btrfs_check_data_free_space().
   As a consequence the mechanism for synchronizing NOCOW buffered writes
   with snapshotting gets broken.

Fix this by always setting 'only_release_metadata' to false at the start
of each iteration.

Fixes: 8257b2dc3c1a ("Btrfs: introduce btrfs_{start, end}_nocow_write() for each subvolume")
Fixes: 7ee9e4405f26 ("Btrfs: check if we can nocow if we don't have data space")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adis16480: Add debugfs_reg_access entry

[ Upstream commit 4c35b7a51e2f291471f7221d112c6a45c63e83bc ]

The driver is defining debugfs entries by calling
`adis16480_debugfs_init()`. However, those entries are attached to the
iio_dev debugfs entry which won't exist if no debugfs_reg_access
callback is provided.

Fixes: 2f3abe6cbb6c ("iio:imu: Add support for the ADIS16480 and similar IMUs")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xhci: make sure interrupts are restored to correct state

[ Upstream commit bd82873f23c9a6ad834348f8b83f3b6a5bca2c65 ]

spin_unlock_irqrestore() might be called with stale flags after
reading port status, possibly restoring interrupts to a incorrect
state.

If a usb2 port just finished resuming while the port status is read
the spin lock will be temporary released and re-acquired in a separate
function. The flags parameter is passed as value instead of a pointer,
not updating flags properly before the final spin_unlock_irqrestore()
is called.

Cc: <stable@vger.kernel.org> # v3.12+
Fixes: 8b3d45705e54 ("usb: Fix xHCI host issues on remote wakeup.")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191211142007.8847-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xhci: Fix memory leak in xhci_add_in_port()

[ Upstream commit ce91f1a43b37463f517155bdfbd525eb43adbd1a ]

When xHCI is part of Alpine or Titan Ridge Thunderbolt controller and
the xHCI device is hot-removed as a result of unplugging a dock for
example, the driver leaks memory it allocates for xhci->usb3_rhub.psi
and xhci->usb2_rhub.psi in xhci_add_in_port() as reported by kmemleak:

unreferenced object 0xffff922c24ef42f0 (size 16):
  comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s)
  hex dump (first 16 bytes):
    21 00 0c 00 12 00 dc 05 23 00 e0 01 00 00 00 00  !.......#.......
  backtrace:
    [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7
    [<0000000001b6d775>] xhci_init+0x7c/0x160
    [<00000000db443fe3>] xhci_gen_setup+0x214/0x340
    [<00000000fdffd320>] xhci_pci_setup+0x48/0x110
    [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747
    [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4
    [<0000000021043861>] xhci_pci_probe+0x24/0x1c0
    [<00000000b9231f25>] local_pci_probe+0x3d/0x70
    [<000000006385c9d7>] pci_device_probe+0xd0/0x150
    [<0000000070241068>] really_probe+0xf5/0x3c0
    [<0000000061f35c0a>] driver_probe_device+0x58/0x100
    [<000000009da11198>] bus_for_each_drv+0x79/0xc0
    [<000000009ce45f69>] __device_attach+0xda/0x160
    [<00000000df201aaf>] pci_bus_add_device+0x46/0x70
    [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60
    [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60
unreferenced object 0xffff922c24ef3318 (size 8):
  comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s)
  hex dump (first 8 bytes):
    34 01 05 00 35 41 0a 00                          4...5A..
  backtrace:
    [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7
    [<0000000001b6d775>] xhci_init+0x7c/0x160
    [<00000000db443fe3>] xhci_gen_setup+0x214/0x340
    [<00000000fdffd320>] xhci_pci_setup+0x48/0x110
    [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747
    [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4
    [<0000000021043861>] xhci_pci_probe+0x24/0x1c0
    [<00000000b9231f25>] local_pci_probe+0x3d/0x70
    [<000000006385c9d7>] pci_device_probe+0xd0/0x150
    [<0000000070241068>] really_probe+0xf5/0x3c0
    [<0000000061f35c0a>] driver_probe_device+0x58/0x100
    [<000000009da11198>] bus_for_each_drv+0x79/0xc0
    [<000000009ce45f69>] __device_attach+0xda/0x160
    [<00000000df201aaf>] pci_bus_add_device+0x46/0x70
    [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60
    [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60

Fix this by calling kfree() for the both psi objects in
xhci_mem_cleanup().

Cc: <stable@vger.kernel.org> # 4.4+
Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191211142007.8847-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: xhci: only set D3hot for pci device

[ Upstream commit f2c710f7dca8457e88b4ac9de2060f011254f9dd ]

Xhci driver cannot call pci_set_power_state() on non-pci xhci host
controllers. For example, NVIDIA Tegra XHCI host controller which acts
as platform device with XHCI_SPURIOUS_WAKEUP quirk set in some platform
hits this issue during shutdown.

Cc: <stable@vger.kernel.org>
Fixes: 638298dc66ea ("xhci: Fix spurious wakeups after S5 on Haswell")
Signed-off-by: Henry Lin <henryl@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191211142007.8847-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: zfcp: trace channel log even for FCP command responses

[ Upstream commit 100843f176109af94600e500da0428e21030ca7f ]

While v2.6.26 commit b75db73159cc ("[SCSI] zfcp: Add qtcb dump to hba debug
trace") is right that we don't want to flood the (payload) trace ring
buffer, we don't trace successful FCP command responses by default.  So we
can include the channel log for problem determination with failed responses
of any FSF request type.

Fixes: b75db73159cc ("[SCSI] zfcp: Add qtcb dump to hba debug trace")
Fixes: a54ca0f62f95 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.")
Cc: <stable@vger.kernel.org> #2.6.38+
Link: https://lore.kernel.org/r/e37597b5c4ae123aaa85fd86c23a9f71e994e4a9.1572018132.git.bblock@linux.ibm.com
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

quota: fix livelock in dquot_writeback_dquots

commit 6ff33d99fc5c96797103b48b7b0902c296f09c05 upstream.

Write only quotas which are dirty at entry.

XFSTEST: https://github.com/dmonakhov/xfstests/commit/b10ad23566a5bf75832a6f500e1236084083cddc

Link: https://lore.kernel.org/r/20191031103920.3919-1-dmonakhov@openvz.org
CC: stable@vger.kernel.org
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext2: check err when partial != NULL

commit e705f4b8aa27a59f8933e8f384e9752f052c469c upstream.

Check err when partial == NULL is meaningless because
partial == NULL means getting branch successfully without
error.

CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191105045100.7104-1-cgxu519@mykernel.net
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

quota: Check that quota is not dirty before release

commit df4bb5d128e2c44848aeb36b7ceceba3ac85080d upstream.

There is a race window where quota was redirted once we drop dq_list_lock inside dqput(),
but before we grab dquot->dq_lock inside dquot_release()

TASK1                                                       TASK2 (chowner)
->dqput()
  we_slept:
    spin_lock(&dq_list_lock)
    if (dquot_dirty(dquot)) {
          spin_unlock(&dq_list_lock);
          dquot->dq_sb->dq_op->write_dquot(dquot);
          goto we_slept
    if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) {
          spin_unlock(&dq_list_lock);
          dquot->dq_sb->dq_op->release_dquot(dquot);
                                                            dqget()
    mark_dquot_dirty()
    dqput()
          goto we_slept;
        }
So dquot dirty quota will be released by TASK1, but on next we_sleept loop
we detect this and call ->write_dquot() for it.
XFSTEST: https://github.com/dmonakhov/xfstests/commit/440a80d4cbb39e9234df4d7240aee1d551c36107

Link: https://lore.kernel.org/r/20191031103920.3919-2-dmonakhov@openvz.org
CC: stable@vger.kernel.org
Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

video/hdmi: Fix AVI bar unpack

commit 6039f37dd6b76641198e290f26b31c475248f567 upstream.

The bar values are little endian, not big endian. The pack
function did it right but the unpack got it wrong. Fix it.

Cc: stable@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: Martin Bugge <marbugge@cisco.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fixes: 2c676f378edb ("[media] hdmi: added unpack and logging functions for InfoFrames")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919132853.30954-1-ville.syrjala@linux.intel.com
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Allow 64bit VDSO __kernel_sync_dicache to work across ranges >4GB

commit f9ec11165301982585e5e5f606739b5bae5331f3 upstream.

When calling __kernel_sync_dicache with a size >4GB, we were masking
off the upper 32 bits, so we would incorrectly flush a range smaller
than intended.

This patch replaces the 32 bit shifts with 64 bit ones, so that
the full size is accounted for.

Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Cc: stable@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191104023305.9581-3-alastair@au1.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ppdev: fix PPGETTIME/PPSETTIME ioctls

commit 998174042da229e2cf5841f574aba4a743e69650 upstream.

Going through the uses of timeval in the user space API,
I noticed two bugs in ppdev that were introduced in the y2038
conversion:

* The range check was accidentally moved from ppsettime to
  ppgettime

* On sparc64, the microseconds are in the other half of the
  64-bit word.

Fix both, and mark the fix for stable backports.

Cc: stable@vger.kernel.org
Fixes: 3b9ab374a1e6 ("ppdev: convert to y2038 safe")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20191108203435.112759-8-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: host: omap_hsmmc: add code for special init of wl1251 to get rid of pandora_wl1251_init_card

commit f6498b922e57aecbe3b7fa30a308d9d586c0c369 upstream.

Pandora_wl1251_init_card was used to do special pdata based
setup of the sdio mmc interface. This does no longer work with
v4.7 and later. A fix requires a device tree based mmc3 setup.

Therefore we move the special setup to omap_hsmmc.c instead
of calling some pdata supplied init_card function.

The new code checks for a DT child node compatible to wl1251
so it will not affect other MMC3 use cases.

Generally, this code was and still is a hack and should be
moved to mmc core to e.g. read such properties from optional
DT child nodes.

Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: <stable@vger.kernel.org> # v4.7+
[Ulf: Fixed up some checkpatch complaints]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: samsung: Fix device node refcount leaks in init code

commit a322b3377f4bac32aa25fb1acb9e7afbbbbd0137 upstream.

Several functions use for_each_child_of_node() loop with a break to find
a matching child node.  Although each iteration of
for_each_child_of_node puts the previous node, but early exit from loop
misses it.  This leads to leak of device node.

Cc: <stable@vger.kernel.org>
Fixes: 9a2c1c3b91aa ("pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: samsung: Fix device node refcount leaks in S3C24xx wakeup controller init

commit 6fbbcb050802d6ea109f387e961b1dbcc3a80c96 upstream.

In s3c24xx_eint_init() the for_each_child_of_node() loop is used with a
break to find a matching child node.  Although each iteration of
for_each_child_of_node puts the previous node, but early exit from loop
misses it.  This leads to leak of device node.

Cc: <stable@vger.kernel.org>
Fixes: af99a7507469 ("pinctrl: Add pinctrl-s3c24xx driver")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: PM: Avoid attaching ACPI PM domain to certain devices

commit b9ea0bae260f6aae546db224daa6ac1bd9d94b91 upstream.

Certain ACPI-enumerated devices represented as platform devices in
Linux, like fans, require special low-level power management handling
implemented by their drivers that is not in agreement with the ACPI
PM domain behavior.  That leads to problems with managing ACPI fans
during system-wide suspend and resume.

For this reason, make acpi_dev_pm_attach() skip the affected devices
by adding a list of device IDs to avoid to it and putting the IDs of
the affected devices into that list.

Fixes: e5cc8ef31267 (ACPI / PM: Provide ACPI PM callback routines for subsystems)
Reported-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: bus: Fix NULL pointer check in acpi_bus_get_private_data()

commit 627ead724eff33673597216f5020b72118827de4 upstream.

kmemleak reported backtrace:
    [<bbee0454>] kmem_cache_alloc_trace+0x128/0x260
    [<6677f215>] i2c_acpi_install_space_handler+0x4b/0xe0
    [<1180f4fc>] i2c_register_adapter+0x186/0x400
    [<6083baf7>] i2c_add_adapter+0x4e/0x70
    [<a3ddf966>] intel_gmbus_setup+0x1a2/0x2c0 [i915]
    [<84cb69ae>] i915_driver_probe+0x8d8/0x13a0 [i915]
    [<81911d4b>] i915_pci_probe+0x48/0x160 [i915]
    [<4b159af1>] pci_device_probe+0xdc/0x160
    [<b3c64704>] really_probe+0x1ee/0x450
    [<bc029f5a>] driver_probe_device+0x142/0x1b0
    [<d8829d20>] device_driver_attach+0x49/0x50
    [<de71f045>] __driver_attach+0xc9/0x150
    [<df33ac83>] bus_for_each_dev+0x56/0xa0
    [<80089bba>] driver_attach+0x19/0x20
    [<cc73f583>] bus_add_driver+0x177/0x220
    [<7b29d8c7>] driver_register+0x56/0xf0

In i2c_acpi_remove_space_handler(), a leak occurs whenever the
"data" parameter is initialized to 0 before being passed to
acpi_bus_get_private_data().

This is because the NULL pointer check in acpi_bus_get_private_data()
(condition->if(!*data)) returns EINVAL and, in consequence, memory is
never freed in i2c_acpi_remove_space_handler().

Fix the NULL pointer check in acpi_bus_get_private_data() to follow
the analogous check in acpi_get_data_full().

Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
[ rjw: Subject & changelog ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: OSL: only free map once in osl.c

commit 833a426cc471b6088011b3d67f1dc4e147614647 upstream.

acpi_os_map_cleanup checks map->refcount outside of acpi_ioremap_lock
before freeing the map. This creates a race condition the can result
in the map being freed more than once.
A panic can be caused by running

for ((i=0; i<10; i++))
do
        for ((j=0; j<100000; j++))
        do
                cat /sys/firmware/acpi/tables/data/BERT >/dev/null
        done &
done

This patch makes sure that only the process that drops the reference
to 0 does the freeing.

Fixes: b7c1fadd6c2e ("ACPI: Do not use krefs under a mutex in osl.c")
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / devfreq: Lock devfreq in trans_stat_show

commit 2abb0d5268ae7b5ddf82099b1f8d5aa8414637d4 upstream.

There is no locking in this sysfs show function so stats printing can
race with a devfreq_update_status called as part of freq switching or
with initialization.

Also add an assert in devfreq_update_status to make it clear that lock
must be held by caller.

Fixes: 39688ce6facd ("PM / devfreq: account suspend/resume for stats")
Cc: stable@vger.kernel.org
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpuidle: Do not unset the driver if it is there already

commit 918c1fe9fbbe46fcf56837ff21f0ef96424e8b29 upstream.

Fix __cpuidle_set_driver() to check if any of the CPUs in the mask has
a driver different from drv already and, if so, return -EBUSY before
updating any cpuidle_drivers per-CPU pointers.

Fixes: 82467a5a885d ("cpuidle: simplify multiple driver support")
Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: radio: wl1273: fix interrupt masking on release

commit 1091eb830627625dcf79958d99353c2391f41708 upstream.

If a process is interrupted while accessing the radio device and the
core lock is contended, release() could return early and fail to update
the interrupt mask.

Note that the return value of the v4l2 release file operation is
ignored.

Fixes: 87d1a50ce451 ("[media] V4L2: WL1273 FM Radio: TI WL1273 FM radio driver")
Cc: stable <stable@vger.kernel.org> # 2.6.38
Cc: Matti Aaltonen <matti.j.aaltonen@nokia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: bdisp: fix memleak on release

commit 11609a7e21f8cea42630350aa57662928fa4dc63 upstream.

If a process is interrupted while accessing the video device and the
device lock is contended, release() could return early and fail to free
related resources.

Note that the return value of the v4l2 release file operation is
ignored.

Fixes: 28ffeebbb7bd ("[media] bdisp: 2D blitter driver using v4l2 mem2mem framework")
Cc: stable <stable@vger.kernel.org> # 4.2
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ar5523: check NULL before memcpy() in ar5523_cmd()

commit 315cee426f87658a6799815845788fde965ddaad upstream.

memcpy() call with "idata == NULL && ilen == 0" results in undefined
behavior in ar5523_cmd(). For example, NULL is passed in callchain
"ar5523_stat_work() -> ar5523_cmd_write() -> ar5523_cmd()". This patch
adds ilen check before memcpy() call in ar5523_cmd() to prevent an
undefined behavior.

Cc: Pontus Fuchs <pontus.fuchs@gmail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: stable@vger.kernel.org
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: pids: use atomic64_t for pids->limit

commit a713af394cf382a30dd28a1015cbe572f1b9ca75 upstream.

Because pids->limit can be changed concurrently (but we don't want to
take a lock because it would be needlessly expensive), use atomic64_ts
instead.

Fixes: commit 49b786ea146f ("cgroup: implement the PIDs subsystem")
Cc: stable@vger.kernel.org # v4.3+
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-mq: avoid sysfs buffer overflow with too many CPU cores

commit 8962842ca5abdcf98e22ab3b2b45a103f0408b95 upstream.

It is reported that sysfs buffer overflow can be triggered if the system
has too many CPU cores(>841 on 4K PAGE_SIZE) when showing CPUs of
hctx via /sys/block/$DEV/mq/$N/cpu_list.

Use snprintf to avoid the potential buffer overflow.

This version doesn't change the attribute format, and simply stops
showing CPU numbers if the buffer is going to overflow.

Cc: stable@vger.kernel.org
Fixes: 676141e48af7("blk-mq: don't dump CPU -> hw queue map on driver load")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Jack: Fix NULL pointer dereference in snd_soc_jack_report

commit 8f157d4ff039e03e2ed4cb602eeed2fd4687a58f upstream.

Check for existance of jack before tracing.
NULL pointer dereference has been reported by KASAN while unloading
machine driver (snd_soc_cnl_rt274).

Signed-off-by: Pawel Harlozinski <pawel.harlozinski@linux.intel.com>
Link: https://lore.kernel.org/r/20191112130237.10141-1-pawel.harlozinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

workqueue: Fix pwq ref leak in rescuer_thread()

commit e66b39af00f426b3356b96433d620cb3367ba1ff upstream.

008847f66c3 ("workqueue: allow rescuer thread to do more work.") made
the rescuer worker requeue the pwq immediately if there may be more
work items which need rescuing instead of waiting for the next mayday
timer expiration.  Unfortunately, it doesn't check whether the pwq is
already on the mayday list and unconditionally gets the ref and moves
it onto the list.  This doesn't corrupt the list but creates an
additional reference to the pwq.  It got queued twice but will only be
removed once.

This leak later can trigger pwq refcnt warning on workqueue
destruction and prevent freeing of the workqueue.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "Williams, Gerald S" <gerald.s.williams@intel.com>
Cc: NeilBrown <neilb@suse.de>
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

workqueue: Fix spurious sanity check failures in destroy_workqueue()

commit def98c84b6cdf2eeea19ec5736e90e316df5206b upstream.

Before actually destrying a workqueue, destroy_workqueue() checks
whether it's actually idle.  If it isn't, it prints out a bunch of
warning messages and leaves the workqueue dangling.  It unfortunately
has a couple issues.

* Mayday list queueing increments pwq's refcnts which gets detected as
  busy and fails the sanity checks.  However, because mayday list
  queueing is asynchronous, this condition can happen without any
  actual work items left in the workqueue.

* Sanity check failure leaves the sysfs interface behind too which can
  lead to init failure of newer instances of the workqueue.

This patch fixes the above two by

* If a workqueue has a rescuer, disable and kill the rescuer before
  sanity checks.  Disabling and killing is guaranteed to flush the
  existing mayday list.

* Remove sysfs interface before sanity checks.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Marcin Pawlowski <mpawlowski@fb.com>
Reported-by: "Williams, Gerald S" <gerald.s.williams@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Fix pending unsol events at shutdown

[ Upstream commit ca58f55108fee41d87c9123f85ad4863e5de7f45 ]

This is an alternative fix attemp for the issue reported in the commit
caa8422d01e9 ("ALSA: hda: Flush interrupts on disabling") that was
reverted later due to regressions.  Instead of tweaking the hardware
disablement order and the enforced irq flushing, do calling
cancel_work_sync() of the unsol work early enough, and explicitly
ignore the unsol events during the shutdown by checking the
bus->shutdown flag.

Fixes: caa8422d01e9 ("ALSA: hda: Flush interrupts on disabling")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://lore.kernel.org/r/s5h1ruxt9cz.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib: raid6: fix awk build warnings

commit 702600eef73033ddd4eafcefcbb6560f3e3a90f7 upstream.

Newer versions of awk spit out these fun warnings:
awk: ../lib/raid6/unroll.awk:16: warning: regexp escape sequence `\#' is not a known regexp operator

As commit 700c1018b86d ("x86/insn: Fix awk regexp warnings") showed, it
turns out that there are a number of awk strings that do not need to be
escaped and newer versions of awk now warn about this.

Fix the string up so that no warning is produced.  The exact same kernel
module gets created before and after this patch, showing that it wasn't
needed.

Link: https://lore.kernel.org/r/20191206152600.GA75093@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8192de: Fix missing enable interrupt flag

commit 330bb7117101099c687e9c7f13d48068670b9c62 upstream.

In commit 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for
new drivers"), the flag that indicates that interrupts are enabled was
never set.

In addition, there are several places when enable/disable interrupts
were commented out are restored. A sychronize_interrupts() call is
removed.

Fixes: 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers")
Cc: Stable <stable@vger.kernel.org> # v3.18+
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8192de: Fix missing callback that tests for hw release of buffer

commit 3155db7613edea8fb943624062baf1e4f9cfbfd6 upstream.

In commit 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for
new drivers"), a callback needed to check if the hardware has released
a buffer indicating that a DMA operation is completed was not added.

Fixes: 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers")
Cc: Stable <stable@vger.kernel.org> # v3.18+
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8192de: Fix missing code to retrieve RX buffer address

commit 0e531cc575c4e9e3dd52ad287b49d3c2dc74c810 upstream.

In commit 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for
new drivers"), a callback to get the RX buffer address was added to
the PCI driver. Unfortunately, driver rtl8192de was not modified
appropriately and the code runs into a WARN_ONCE() call. The use
of an incorrect array is also fixed.

Fixes: 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers")
Cc: Stable <stable@vger.kernel.org> # 3.18+
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: record all roots for rename exchange on a subvol

commit 3e1740993e43116b3bc71b0aad1e6872f6ccf341 upstream.

Testing with the new fsstress support for subvolumes uncovered a pretty
bad problem with rename exchange on subvolumes.  We're modifying two
different subvolumes, but we only start the transaction on one of them,
so the other one is not added to the dirty root list.  This is caught by
btrfs_cow_block() with a warning because the root has not been updated,
however if we do not modify this root again we'll end up pointing at an
invalid root because the root item is never updated.

Fix this by making sure we add the destination root to the trans list,
the same as we do with normal renames.  This fixes the corruption.

Fixes: cdd1fedf8261 ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: send, skip backreference walking for extents with many references

commit fd0ddbe2509568b00df364156f47561e9f469f15 upstream.

Backreference walking, which is used by send to figure if it can issue
clone operations instead of write operations, can be very slow and use
too much memory when extents have many references. This change simply
skips backreference walking when an extent has more than 64 references,
in which case we fallback to a write operation instead of a clone
operation. This limit is conservative and in practice I observed no
signicant slowdown with up to 100 references and still low memory usage
up to that limit.

This is a temporary workaround until there are speedups in the backref
walking code, and as such it does not attempt to add extra interfaces or
knobs to tweak the threshold.

Reported-by: Atemu <atemu.main@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAE4GHgkvqVADtS4AzcQJxo0Q1jKQgKaW3JGp3SGdoinVo=C9eQ@mail.gmail.com/T/#me55dc0987f9cc2acaa54372ce0492c65782be3fa
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: Remove btrfs_bio::flags member

commit 34b127aecd4fe8e6a3903e10f204a7b7ffddca22 upstream.

The last user of btrfs_bio::flags was removed in commit 326e1dbb5736
("block: remove management of bi_remaining when restoring original
bi_end_io"), remove it.

(Tagged for stable as the structure is heavily used and space savings
are desirable.)

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: check page->mapping when loading free space cache

commit 3797136b626ad4b6582223660c041efdea8f26b2 upstream.

While testing 5.2 we ran into the following panic

[52238.017028] BUG: kernel NULL pointer dereference, address: 0000000000000001
[52238.105608] RIP: 0010:drop_buffers+0x3d/0x150
[52238.304051] Call Trace:
[52238.308958]  try_to_free_buffers+0x15b/0x1b0
[52238.317503]  shrink_page_list+0x1164/0x1780
[52238.325877]  shrink_inactive_list+0x18f/0x3b0
[52238.334596]  shrink_node_memcg+0x23e/0x7d0
[52238.342790]  ? do_shrink_slab+0x4f/0x290
[52238.350648]  shrink_node+0xce/0x4a0
[52238.357628]  balance_pgdat+0x2c7/0x510
[52238.365135]  kswapd+0x216/0x3e0
[52238.371425]  ? wait_woken+0x80/0x80
[52238.378412]  ? balance_pgdat+0x510/0x510
[52238.386265]  kthread+0x111/0x130
[52238.392727]  ? kthread_create_on_node+0x60/0x60
[52238.401782]  ret_from_fork+0x1f/0x30

The page we were trying to drop had a page->private, but had no
page->mapping and so called drop_buffers, assuming that we had a
buffer_head on the page, and then panic'ed trying to deref 1, which is
our page->private for data pages.

This is happening because we're truncating the free space cache while
we're trying to load the free space cache.  This isn't supposed to
happen, and I'll fix that in a followup patch.  However we still
shouldn't allow those sort of mistakes to result in messing with pages
that do not belong to us.  So add the page->mapping check to verify that
we still own this page after dropping and re-acquiring the page lock.

This page being unlocked as:
btrfs_readpage
  extent_read_full_page
    __extent_read_full_page
      __do_readpage
        if (!nr)
   unlock_page  <-- nr can be 0 only if submit_extent_page
    returns an error

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add callchain ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio-balloon: fix managed page counts when migrating pages between zones

commit 63341ab03706e11a31e3dd8ccc0fbc9beaf723f0 upstream.

In case we have to migrate a ballon page to a newpage of another zone, the
managed page count of both zones is wrong. Paired with memory offlining
(which will adjust the managed page count), we can trigger kernel crashes
and all kinds of different symptoms.

One way to reproduce:
1. Start a QEMU guest with 4GB, no NUMA
2. Hotplug a 1GB DIMM and online the memory to ZONE_NORMAL
3. Inflate the balloon to 1GB
4. Unplug the DIMM (be quick, otherwise unmovable data ends up on it)
5. Observe /proc/zoneinfo
  Node 0, zone   Normal
    pages free     16810
          min      24848885473806
          low      18471592959183339
          high     36918337032892872
          spanned  262144
          present  262144
          managed  18446744073709533486
6. Do anything that requires some memory (e.g., inflate the balloon some
more). The OOM goes crazy and the system crashes
  [  238.324946] Out of memory: Killed process 537 (login) total-vm:27584kB, anon-rss:860kB, file-rss:0kB, shmem-rss:00
  [  238.338585] systemd invoked oom-killer: gfp_mask=0x100cca(GFP_HIGHUSER_MOVABLE), order=0, oom_score_adj=0
  [  238.339420] CPU: 0 PID: 1 Comm: systemd Tainted: G      D W         5.4.0-next-20191204+ #75
  [  238.340139] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu4
  [  238.341121] Call Trace:
  [  238.341337]  dump_stack+0x8f/0xd0
  [  238.341630]  dump_header+0x61/0x5ea
  [  238.341942]  oom_kill_process.cold+0xb/0x10
  [  238.342299]  out_of_memory+0x24d/0x5a0
  [  238.342625]  __alloc_pages_slowpath+0xd12/0x1020
  [  238.343024]  __alloc_pages_nodemask+0x391/0x410
  [  238.343407]  pagecache_get_page+0xc3/0x3a0
  [  238.343757]  filemap_fault+0x804/0xc30
  [  238.344083]  ? ext4_filemap_fault+0x28/0x42
  [  238.344444]  ext4_filemap_fault+0x30/0x42
  [  238.344789]  __do_fault+0x37/0x1a0
  [  238.345087]  __handle_mm_fault+0x104d/0x1ab0
  [  238.345450]  handle_mm_fault+0x169/0x360
  [  238.345790]  do_user_addr_fault+0x20d/0x490
  [  238.346154]  do_page_fault+0x31/0x210
  [  238.346468]  async_page_fault+0x43/0x50
  [  238.346797] RIP: 0033:0x7f47eba4197e
  [  238.347110] Code: Bad RIP value.
  [  238.347387] RSP: 002b:00007ffd7c0c1890 EFLAGS: 00010293
  [  238.347834] RAX: 0000000000000002 RBX: 000055d196a20a20 RCX: 00007f47eba4197e
  [  238.348437] RDX: 0000000000000033 RSI: 00007ffd7c0c18c0 RDI: 0000000000000004
  [  238.349047] RBP: 00007ffd7c0c1c20 R08: 0000000000000000 R09: 0000000000000033
  [  238.349660] R10: 00000000ffffffff R11: 0000000000000293 R12: 0000000000000001
  [  238.350261] R13: ffffffffffffffff R14: 0000000000000000 R15: 00007ffd7c0c18c0
  [  238.350878] Mem-Info:
  [  238.351085] active_anon:3121 inactive_anon:51 isolated_anon:0
  [  238.351085]  active_file:12 inactive_file:7 isolated_file:0
  [  238.351085]  unevictable:0 dirty:0 writeback:0 unstable:0
  [  238.351085]  slab_reclaimable:5565 slab_unreclaimable:10170
  [  238.351085]  mapped:3 shmem:111 pagetables:155 bounce:0
  [  238.351085]  free:720717 free_pcp:2 free_cma:0
  [  238.353757] Node 0 active_anon:12484kB inactive_anon:204kB active_file:48kB inactive_file:28kB unevictable:0kB iss
  [  238.355979] Node 0 DMA free:11556kB min:36kB low:48kB high:60kB reserved_highatomic:0KB active_anon:152kB inactivB
  [  238.358345] lowmem_reserve[]: 0 2955 2884 2884 2884
  [  238.358761] Node 0 DMA32 free:2677864kB min:7004kB low:10028kB high:13052kB reserved_highatomic:0KB active_anon:0B
  [  238.361202] lowmem_reserve[]: 0 0 72057594037927865 72057594037927865 72057594037927865
  [  238.361888] Node 0 Normal free:193448kB min:99395541895224kB low:73886371836733356kB high:147673348131571488kB reB
  [  238.364765] lowmem_reserve[]: 0 0 0 0 0
  [  238.365101] Node 0 DMA: 7*4kB (U) 5*8kB (UE) 6*16kB (UME) 2*32kB (UM) 1*64kB (U) 2*128kB (UE) 3*256kB (UME) 2*512B
  [  238.366379] Node 0 DMA32: 0*4kB 1*8kB (U) 2*16kB (UM) 2*32kB (UM) 2*64kB (UM) 1*128kB (U) 1*256kB (U) 1*512kB (U)B
  [  238.367654] Node 0 Normal: 1985*4kB (UME) 1321*8kB (UME) 844*16kB (UME) 524*32kB (UME) 300*64kB (UME) 138*128kB (B
  [  238.369184] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
  [  238.369915] 130 total pagecache pages
  [  238.370241] 0 pages in swap cache
  [  238.370533] Swap cache stats: add 0, delete 0, find 0/0
  [  238.370981] Free swap  = 0kB
  [  238.371239] Total swap = 0kB
  [  238.371488] 1048445 pages RAM
  [  238.371756] 0 pages HighMem/MovableOnly
  [  238.372090] 306992 pages reserved
  [  238.372376] 0 pages cma reserved
  [  238.372661] 0 pages hwpoisoned

In another instance (older kernel), I was able to observe this
(negative page count :/):
  [  180.896971] Offlined Pages 32768
  [  182.667462] Offlined Pages 32768
  [  184.408117] Offlined Pages 32768
  [  186.026321] Offlined Pages 32768
  [  187.684861] Offlined Pages 32768
  [  189.227013] Offlined Pages 32768
  [  190.830303] Offlined Pages 32768
  [  190.833071] Built 1 zonelists, mobility grouping on.  Total pages: -36920272750453009

In another instance (older kernel), I was no longer able to start any
process:
  [root@vm ~]# [  214.348068] Offlined Pages 32768
  [  215.973009] Offlined Pages 32768
  cat /proc/meminfo
  -bash: fork: Cannot allocate memory
  [root@vm ~]# cat /proc/meminfo
  -bash: fork: Cannot allocate memory

Fix it by properly adjusting the managed page count when migrating if
the zone changed. The managed page count of the zones now looks after
unplug of the DIMM (and after deflating the balloon) just like before
inflating the balloon (and plugging+onlining the DIMM).

We'll temporarily modify the totalram page count. If this ever becomes a
problem, we can fine tune by providing helpers that don't touch
the totalram pages (e.g., adjust_zone_managed_page_count()).

Please note that fixing up the managed page count is only necessary when
we adjusted the managed page count when inflating - only if we
don't have VIRTIO_BALLOON_F_DEFLATE_ON_OOM. With that feature, the
managed page count is not touched when inflating/deflating.

Reported-by: Yumei Huang <yuhuang@redhat.com>
Fixes: 3dcc0571cd64 ("mm: correctly update zone->managed_pages")
Cc: <stable@vger.kernel.org> # v3.11+
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: spear_smi: Fix Write Burst mode

commit 69c7f4618c16b4678f8a4949b6bb5ace259c0033 upstream.

Any write with either dd or flashcp to a device driven by the
spear_smi.c driver will pass through the spear_smi_cpy_toio()
function. This function will get called for chunks of up to 256 bytes.
If the amount of data is smaller, we may have a problem if the data
length is not 4-byte aligned. In this situation, the kernel panics
during the memcpy:

    # dd if=/dev/urandom bs=1001 count=1 of=/dev/mtd6
    spear_smi_cpy_toio [620] dest c9070000, src c7be8800, len 256
    spear_smi_cpy_toio [620] dest c9070100, src c7be8900, len 256
    spear_smi_cpy_toio [620] dest c9070200, src c7be8a00, len 256
    spear_smi_cpy_toio [620] dest c9070300, src c7be8b00, len 233
    Unhandled fault: external abort on non-linefetch (0x808) at 0xc90703e8
    [...]
    PC is at memcpy+0xcc/0x330

The above error occurs because the implementation of memcpy_toio()
tries to optimize the number of I/O by writing 4 bytes at a time as
much as possible, until there are less than 4 bytes left and then
switches to word or byte writes.

Unfortunately, the specification states about the Write Burst mode:

        "the next AHB Write request should point to the next
incremented address and should have the same size (byte,
half-word or word)"

This means ARM architecture implementation of memcpy_toio() cannot
reliably be used blindly here. Workaround this situation by update the
write path to stick to byte access when the burst length is not
multiple of 4.

Fixes: f18dbbb1bfe0 ("mtd: ST SPEAr: Add SMI driver for serial NOR flash")
Cc: Russell King <linux@armlinux.org.uk>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: mon: Fix a deadlock in usbmon between mmap and read

commit 19e6317d24c25ee737c65d1ffb7483bdda4bb54a upstream.

The problem arises because our read() function grabs a lock of the
circular buffer, finds something of interest, then invokes copy_to_user()
straight from the buffer, which in turn takes mm->mmap_sem. In the same
time, the callback mon_bin_vma_fault() is invoked under mm->mmap_sem.
It attempts to take the fetch lock and deadlocks.

This patch does away with protecting of our page list with any
semaphores, and instead relies on the kernel not close the device
while mmap is active in a process.

In addition, we prohibit re-sizing of a buffer while mmap is active.
This way, when (now unlocked) fault is processed, it works with the
page that is intended to be mapped-in, and not some other random page.
Note that this may have an ABI impact, but hopefully no legitimate
program is this wrong.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Reported-by: syzbot+56f9673bb4cdcbeb0e92@syzkaller.appspotmail.com
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 46eb14a6e158 ("USB: fix usbmon BUG trigger")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191204203941.3503452b@suzdal.zaitcev.lan
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: urb: fix URB structure initialization function

commit 1cd17f7f0def31e3695501c4f86cd3faf8489840 upstream.

Explicitly initialize URB structure urb_list field in usb_init_urb().
This field can be potentially accessed uninitialized and its
initialization is coherent with the usage of list_del_init() in
usb_hcd_unlink_urb_from_ep() and usb_giveback_urb_bh() and its
explicit initialization in usb_hcd_submit_urb() error path.

Signed-off-by: Emiliano Ingrassia <ingrassia@epigenesys.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191127160355.GA27196@ingrassia.epigenesys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: adutux: fix interface sanity check

commit 3c11c4bed02b202e278c0f5c319ae435d7fb9815 upstream.

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 03270634e242 ("USB: Add ADU support for Ontrak ADU devices")
Cc: stable <stable@vger.kernel.org> # 2.6.19
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191210112601.3561-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: io_edgeport: fix epic endpoint lookup

commit 7c5a2df3367a2c4984f1300261345817d95b71f8 upstream.

Make sure to use the current alternate setting when looking up the
endpoints on epic devices to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 6e8cf7751f9f ("USB: add EPIC support to the io_edgeport driver")
Cc: stable <stable@vger.kernel.org> # 2.6.21
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191210112601.3561-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: idmouse: fix interface sanity checks

commit 59920635b89d74b9207ea803d5e91498d39e8b69 upstream.

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191210112601.3561-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: atm: ueagle-atm: add missing endpoint check

commit 09068c1ad53fb077bdac288869dec2435420bdc4 upstream.

Make sure that the interrupt interface has an endpoint before trying to
access its endpoint descriptors to avoid dereferencing a NULL pointer.

The driver binds to the interrupt interface with interface number 0, but
must not assume that this interface or its current alternate setting are
the first entries in the corresponding configuration arrays.

Fixes: b72458a80c75 ("[PATCH] USB: Eagle and ADI 930 usb adsl modem driver")
Cc: stable <stable@vger.kernel.org> # 2.6.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191210112601.3561-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reporting

commit 342a6928bd5017edbdae376042d8ad6af3d3b943 upstream.

The IIO_HUMIDITYRELATIVE channel was being incorrectly reported back
as percent when it should have been milli percent. This is via an
incorrect scale value being returned to userspace.

Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: pandora-common: define wl1251 as child node of mmc3

commit 4f9007d692017cef38baf2a9b82b7879d5b2407b upstream.

Since v4.7 the dma initialization requires that there is a
device tree property for "rx" and "tx" channels which is
not provided by the pdata-quirks initialization.

By conversion of the mmc3 setup to device tree this will
finally allows to remove the OpenPandora wlan specific omap3
data-quirks.

Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: <stable@vger.kernel.org> # v4.7+
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Increase STS_HALT timeout in xhci_suspend()

commit 7c67cf6658cec70d8a43229f2ce74ca1443dc95e upstream.

I've recently observed failed xHCI suspend attempt on AMD Raven Ridge
system:
kernel: xhci_hcd 0000:04:00.4: WARN: xHC CMD_RUN timeout
kernel: PM: suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110
kernel: PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110
kernel: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns -110
kernel: PM: Device 0000:04:00.4 failed to suspend async: error -110

Similar to commit ac343366846a ("xhci: Increase STS_SAVE timeout in
xhci_suspend()") we also need to increase the HALT timeout to make it be
able to suspend again.

Cc: <stable@vger.kernel.org> # 5.2+
Fixes: f7fac17ca925 ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191211142007.8847-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gigaset: add endpoint-type sanity check

commit ed9ed5a89acba51b82bdff61144d4e4a4245ec8a upstream.

Add missing endpoint-type sanity checks to probe.

This specifically prevents a warning in USB core on URB submission when
fuzzing USB descriptors.

Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191202085610.12719-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gigaset: fix illegal free on probe errors

commit 84f60ca7b326ed8c08582417493982fe2573a9ad upstream.

The driver failed to initialise its receive-buffer pointer, something
which could lead to an illegal free on late probe errors.

Fix this by making sure to clear all driver data at allocation.

Fixes: 2032e2c2309d ("usb_gigaset: code cleanup")
Cc: stable <stable@vger.kernel.org> # 2.6.33
Cc: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191202085610.12719-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gigaset: fix general protection fault on probe

commit 53f35a39c3860baac1e5ca80bf052751cfb24a99 upstream.

Fix a general protection fault when accessing the endpoint descriptors
which could be triggered by a malicious device due to missing sanity
checks on the number of endpoints.

Reported-by: syzbot+35b1c403a14f5c89eba7@syzkaller.appspotmail.com
Fixes: 07dc1f9f2f80 ("[PATCH] isdn4linux: Siemens Gigaset drivers - M105 USB DECT adapter")
Cc: stable <stable@vger.kernel.org> # 2.6.17
Cc: Hansjoerg Lipp <hjlipp@web.de>
Cc: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191202085610.12719-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: fix interface sanity check

commit c724f776f048538ecfdf53a52b7a522309f5c504 upstream.

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Cc: stable <stable@vger.kernel.org> # 2.6.37
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191210114751.5119-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fix interface sanity check

commit 74ca34118a0e05793935d804ccffcedd6eb56596 upstream.

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: c2478d39076b ("staging: r8188eu: Add files for new driver - part 20")
Cc: stable <stable@vger.kernel.org> # 3.12
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191210114751.5119-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: Allow USB device to be warm reset in suspended state

commit e76b3bf7654c3c94554c24ba15a3d105f4006c80 upstream.

On Dell WD15 dock, sometimes USB ethernet cannot be detected after plugging
cable to the ethernet port, the hub and roothub get runtime resumed and
runtime suspended immediately:
...
[  433.315169] xhci_hcd 0000:3a:00.0: hcd_pci_runtime_resume: 0
[  433.315204] usb usb4: usb auto-resume
[  433.315226] hub 4-0:1.0: hub_resume
[  433.315239] xhci_hcd 0000:3a:00.0: Get port status 4-1 read: 0x10202e2, return 0x10343
[  433.315264] usb usb4-port1: status 0343 change 0001
[  433.315279] xhci_hcd 0000:3a:00.0: clear port1 connect change, portsc: 0x10002e2
[  433.315293] xhci_hcd 0000:3a:00.0: Get port status 4-2 read: 0x2a0, return 0x2a0
[  433.317012] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling.
[  433.422282] xhci_hcd 0000:3a:00.0: Get port status 4-1 read: 0x10002e2, return 0x343
[  433.422307] usb usb4-port1: do warm reset
[  433.422311] usb 4-1: device reset not allowed in state 8
[  433.422339] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000
[  433.422346] xhci_hcd 0000:3a:00.0: Get port status 4-1 read: 0x10002e2, return 0x343
[  433.422356] usb usb4-port1: do warm reset
[  433.422358] usb 4-1: device reset not allowed in state 8
[  433.422428] xhci_hcd 0000:3a:00.0: set port remote wake mask, actual port 0 status  = 0xf0002e2
[  433.422455] xhci_hcd 0000:3a:00.0: set port remote wake mask, actual port 1 status  = 0xe0002a0
[  433.422465] hub 4-0:1.0: hub_suspend
[  433.422475] usb usb4: bus auto-suspend, wakeup 1
[  433.426161] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling.
[  433.466209] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[  433.510204] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[  433.554051] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[  433.598235] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[  433.642154] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[  433.686204] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[  433.730205] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[  433.774203] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[  433.818207] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[  433.862040] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[  433.862053] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling.
[  433.862077] xhci_hcd 0000:3a:00.0: xhci_suspend: stopping port polling.
[  433.862096] xhci_hcd 0000:3a:00.0: // Setting command ring address to 0x8578fc001
[  433.862312] xhci_hcd 0000:3a:00.0: hcd_pci_runtime_suspend: 0
[  433.862445] xhci_hcd 0000:3a:00.0: PME# enabled
[  433.902376] xhci_hcd 0000:3a:00.0: restoring config space at offset 0xc (was 0x0, writing 0x20)
[  433.902395] xhci_hcd 0000:3a:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100403)
[  433.902490] xhci_hcd 0000:3a:00.0: PME# disabled
[  433.902504] xhci_hcd 0000:3a:00.0: enabling bus mastering
[  433.902547] xhci_hcd 0000:3a:00.0: // Setting command ring address to 0x8578fc001
[  433.902649] pcieport 0000:00:1b.0: PME: Spurious native interrupt!
[  433.902839] xhci_hcd 0000:3a:00.0: Port change event, 4-1, id 3, portsc: 0xb0202e2
[  433.902842] xhci_hcd 0000:3a:00.0: resume root hub
[  433.902845] xhci_hcd 0000:3a:00.0: handle_port_status: starting port polling.
[  433.902877] xhci_hcd 0000:3a:00.0: xhci_resume: starting port polling.
[  433.902889] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling.
[  433.902891] xhci_hcd 0000:3a:00.0: hcd_pci_runtime_resume: 0
[  433.902919] usb usb4: usb wakeup-resume
[  433.902942] usb usb4: usb auto-resume
[  433.902966] hub 4-0:1.0: hub_resume
...

As Mathias pointed out, the hub enters Cold Attach Status state and
requires a warm reset. However usb_reset_device() bails out early when
the device is in suspended state, as its callers port_event() and
hub_event() don't always resume the device.

Since there's nothing wrong to reset a suspended device, allow
usb_reset_device() to do so to solve the issue.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191106062710.29880-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: uas: heed CAPACITY_HEURISTICS

commit 335cbbd5762d5e5c67a8ddd6e6362c2aa42a328f upstream.

There is no need to ignore this flag. We should be as close
to storage in that regard as makes sense, so honor flags whose
cost is tiny.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191114112758.32747-3-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: uas: honor flag to avoid CAPACITY16

commit bff000cae1eec750d62e265c4ba2db9af57b17e1 upstream.

Copy the support over from usb-storage to get feature parity

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191114112758.32747-2-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: configfs: Fix missing spin_lock_init()

commit 093edc2baad2c258b1f55d1ab9c63c2b5ae67e42 upstream.

The driver allocates the spinlock but not initialize it.
Use spin_lock_init() on it to initialize it correctly.

This is detected by Coccinelle semantic patch.

Fixes: 1a1c851bbd70 ("usb: gadget: configfs: fix concurrent issue between composite APIs")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20191030034046.188808-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

appletalk: Set error code if register_snap_client failed

commit c93ad1337ad06a718890a89cdd85188ff9a5a5cc upstream.

If register_snap_client fails in atalk_init,
error code should be set, otherwise it will
triggers NULL pointer dereference while unloading
module.

Fixes: 9804501fa122 ("appletalk: Fix potential NULL pointer dereference in unregister_snap_client")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

appletalk: Fix potential NULL pointer dereference in unregister_snap_client

commit 9804501fa1228048857910a6bf23e085aade37cc upstream.

register_snap_client may return NULL, all the callers
check it, but only print a warning. This will result in
NULL pointer dereference in unregister_snap_client and other
places.

It has always been used like this since v2.6

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to <4.15: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: fix out-of-bounds write in KVM_GET_EMULATED_CPUID (CVE-2019-19332)

commit 433f4ba1904100da65a311033f17a9bf586b287e upstream.

The bounds check was present in KVM_GET_SUPPORTED_CPUID but not
KVM_GET_EMULATED_CPUID.

Reported-by: syzbot+e3f4897236c4eeb8af4f@syzkaller.appspotmail.com
Fixes: 84cffe499b94 ("kvm: Emulate MOVBE", 2013-10-29)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: Fix deadlock in thermal thermal_zone_device_check

commit 163b00cde7cf2206e248789d2780121ad5e6a70b upstream.

1851799e1d29 ("thermal: Fix use-after-free when unregistering thermal zone
device") changed cancel_delayed_work to cancel_delayed_work_sync to avoid
a use-after-free issue. However, cancel_delayed_work_sync could be called
insides the WQ causing deadlock.

[54109.642398] c0   1162 kworker/u17:1   D    0 11030      2 0x00000000
[54109.642437] c0   1162 Workqueue: thermal_passive_wq thermal_zone_device_check
[54109.642447] c0   1162 Call trace:
[54109.642456] c0   1162  __switch_to+0x138/0x158
[54109.642467] c0   1162  __schedule+0xba4/0x1434
[54109.642480] c0   1162  schedule_timeout+0xa0/0xb28
[54109.642492] c0   1162  wait_for_common+0x138/0x2e8
[54109.642511] c0   1162  flush_work+0x348/0x40c
[54109.642522] c0   1162  __cancel_work_timer+0x180/0x218
[54109.642544] c0   1162  handle_thermal_trip+0x2c4/0x5a4
[54109.642553] c0   1162  thermal_zone_device_update+0x1b4/0x25c
[54109.642563] c0   1162  thermal_zone_device_check+0x18/0x24
[54109.642574] c0   1162  process_one_work+0x3cc/0x69c
[54109.642583] c0   1162  worker_thread+0x49c/0x7c0
[54109.642593] c0   1162  kthread+0x17c/0x1b0
[54109.642602] c0   1162  ret_from_fork+0x10/0x18
[54109.643051] c0   1162 kworker/u17:2   D    0 16245      2 0x00000000
[54109.643067] c0   1162 Workqueue: thermal_passive_wq thermal_zone_device_check
[54109.643077] c0   1162 Call trace:
[54109.643085] c0   1162  __switch_to+0x138/0x158
[54109.643095] c0   1162  __schedule+0xba4/0x1434
[54109.643104] c0   1162  schedule_timeout+0xa0/0xb28
[54109.643114] c0   1162  wait_for_common+0x138/0x2e8
[54109.643122] c0   1162  flush_work+0x348/0x40c
[54109.643131] c0   1162  __cancel_work_timer+0x180/0x218
[54109.643141] c0   1162  handle_thermal_trip+0x2c4/0x5a4
[54109.643150] c0   1162  thermal_zone_device_update+0x1b4/0x25c
[54109.643159] c0   1162  thermal_zone_device_check+0x18/0x24
[54109.643167] c0   1162  process_one_work+0x3cc/0x69c
[54109.643177] c0   1162  worker_thread+0x49c/0x7c0
[54109.643186] c0   1162  kthread+0x17c/0x1b0
[54109.643195] c0   1162  ret_from_fork+0x10/0x18
[54109.644500] c0   1162 cat             D    0  7766      1 0x00000001
[54109.644515] c0   1162 Call trace:
[54109.644524] c0   1162  __switch_to+0x138/0x158
[54109.644536] c0   1162  __schedule+0xba4/0x1434
[54109.644546] c0   1162  schedule_preempt_disabled+0x80/0xb0
[54109.644555] c0   1162  __mutex_lock+0x3a8/0x7f0
[54109.644563] c0   1162  __mutex_lock_slowpath+0x14/0x20
[54109.644575] c0   1162  thermal_zone_get_temp+0x84/0x360
[54109.644586] c0   1162  temp_show+0x30/0x78
[54109.644609] c0   1162  dev_attr_show+0x5c/0xf0
[54109.644628] c0   1162  sysfs_kf_seq_show+0xcc/0x1a4
[54109.644636] c0   1162  kernfs_seq_show+0x48/0x88
[54109.644656] c0   1162  seq_read+0x1f4/0x73c
[54109.644664] c0   1162  kernfs_fop_read+0x84/0x318
[54109.644683] c0   1162  __vfs_read+0x50/0x1bc
[54109.644692] c0   1162  vfs_read+0xa4/0x140
[54109.644701] c0   1162  SyS_read+0xbc/0x144
[54109.644708] c0   1162  el0_svc_naked+0x34/0x38
[54109.845800] c0   1162 D 720.000s 1->7766->7766 cat [panic]

Fixes: 1851799e1d29 ("thermal: Fix use-after-free when unregistering thermal zone device")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Wang <wvw@google.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/qib: Validate ->show()/store() callbacks before calling them

commit 7ee23491b39259ae83899dd93b2a29ef0f22f0a7 upstream.

The permissions of the read-only or write-only sysfs files can be
changed (as root) and the user can then try to read a write-only file or
write to a read-only file which will lead to kernel crash here.

Protect against that by always validating the show/store callbacks.

Link: https://lore.kernel.org/r/d45cc26361a174ae12dbb86c994ef334d257924b.1573096807.git.viresh.kumar@linaro.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: atmel: Fix CS high support

commit 7cbb16b2122c09f2ae393a1542fed628505b9da6 upstream.

Until a few years ago, this driver was only used with CS GPIO. The
only exception is CS0 on AT91RM9200 which has to use internal CS. A
limitation of the internal CS is that they don't support CS High.

So by using the CS GPIO the CS high configuration was available except
for the particular case CS0 on RM9200.

When the support for the internal chip-select was added, the check of
the CS high support was not updated. Due to this the driver accepts
this configuration for all the SPI controller v2 (used by all SoCs
excepting the AT91RM9200) whereas the hardware doesn't support it for
infernal CS.

This patch fixes the test to match the hardware capabilities.

Fixes: 4820303480a1 ("spi: atmel: add support for the internal chip-select of the spi controller")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20191017141846.7523-3-gregory.clement@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: user - fix memory leak in crypto_report

commit ffdde5932042600c6807d46c1550b28b0db6a3bc upstream.

In crypto_report, a new skb is created via nlmsg_new(). This skb should
be released if crypto_report_alg() fails.

Fixes: a38f7907b926 ("crypto: Add userspace configuration API")
Cc: <stable@vger.kernel.org>
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ecdh - fix big endian bug in ECC library

commit f398243e9fd6a3a059c1ea7b380c40628dbf0c61 upstream.

The elliptic curve arithmetic library used by the EC-DH KPP implementation
assumes big endian byte order, and unconditionally reverses the byte
and word order of multi-limb quantities. On big endian systems, the byte
reordering is not necessary, while the word ordering needs to be retained.

So replace the __swab64() invocation with a call to be64_to_cpu() which
should do the right thing for both little and big endian builds.

Fixes: 3c4b23901a0c ("crypto: ecdh - Add ECDH software support")
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ccp - fix uninitialized list head

commit 691505a803a7f223b2af621848d581259c61f77d upstream.

A NULL-pointer dereference was reported in fedora bz#1762199 while
reshaping a raid6 array after adding a fifth drive to an existing
array.

[   47.343549] md/raid:md0: raid level 6 active with 3 out of 5 devices, algorithm 2
[   47.804017] md0: detected capacity change from 0 to 7885289422848
[   47.822083] Unable to handle kernel read from unreadable memory at virtual address 0000000000000000
...
[   47.940477] CPU: 1 PID: 14210 Comm: md0_raid6 Tainted: G        W         5.2.18-200.fc30.aarch64 #1
[   47.949594] Hardware name: AMD Overdrive/Supercharger/To be filled by O.E.M., BIOS ROD1002C 04/08/2016
[   47.958886] pstate: 00400085 (nzcv daIf +PAN -UAO)
[   47.963668] pc : __list_del_entry_valid+0x2c/0xa8
[   47.968366] lr : ccp_tx_submit+0x84/0x168 [ccp]
[   47.972882] sp : ffff00001369b970
[   47.976184] x29: ffff00001369b970 x28: ffff00001369bdb8
[   47.981483] x27: 00000000ffffffff x26: ffff8003b758af70
[   47.986782] x25: ffff8003b758b2d8 x24: ffff8003e6245818
[   47.992080] x23: 0000000000000000 x22: ffff8003e62450c0
[   47.997379] x21: ffff8003dfd6add8 x20: 0000000000000003
[   48.002678] x19: ffff8003e6245100 x18: 0000000000000000
[   48.007976] x17: 0000000000000000 x16: 0000000000000000
[   48.013274] x15: 0000000000000000 x14: 0000000000000000
[   48.018572] x13: ffff7e000ef83a00 x12: 0000000000000001
[   48.023870] x11: ffff000010eff998 x10: 00000000000019a0
[   48.029169] x9 : 0000000000000000 x8 : ffff8003e6245180
[   48.034467] x7 : 0000000000000000 x6 : 000000000000003f
[   48.039766] x5 : 0000000000000040 x4 : ffff8003e0145080
[   48.045064] x3 : dead000000000200 x2 : 0000000000000000
[   48.050362] x1 : 0000000000000000 x0 : ffff8003e62450c0
[   48.055660] Call trace:
[   48.058095]  __list_del_entry_valid+0x2c/0xa8
[   48.062442]  ccp_tx_submit+0x84/0x168 [ccp]
[   48.066615]  async_tx_submit+0x224/0x368 [async_tx]
[   48.071480]  async_trigger_callback+0x68/0xfc [async_tx]
[   48.076784]  ops_run_biofill+0x178/0x1e8 [raid456]
[   48.081566]  raid_run_ops+0x248/0x818 [raid456]
[   48.086086]  handle_stripe+0x864/0x1208 [raid456]
[   48.090781]  handle_active_stripes.isra.0+0xb0/0x278 [raid456]
[   48.096604]  raid5d+0x378/0x618 [raid456]
[   48.100602]  md_thread+0xa0/0x150
[   48.103905]  kthread+0x104/0x130
[   48.107122]  ret_from_fork+0x10/0x18
[   48.110686] Code: d2804003 f2fbd5a3 eb03003f 54000320 (f9400021)
[   48.116766] ---[ end trace 23f390a527f7ad77 ]---

ccp_tx_submit is passed a dma_async_tx_descriptor which is contained in
a ccp_dma_desc and adds it to a ccp channel's pending list:

list_del(&desc->entry);
list_add_tail(&desc->entry, &chan->pending);

The problem is that desc->entry may be uninitialized in the
async_trigger_callback path where the descriptor was gotten
from ccp_prep_dma_interrupt which got it from ccp_alloc_dma_desc
which doesn't initialize the desc->entry list head. So, just
initialize the list head to avoid the problem.

Cc: <stable@vger.kernel.org>
Reported-by: Sahaj Sarup <sahajsarup@gmail.com>
Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: crypto4xx - fix double-free in crypto4xx_destroy_sdr

commit 746c908c4d72e49068ab216c3926d2720d71a90d upstream.

This patch fixes a crash that can happen during probe
when the available dma memory is not enough (this can
happen if the crypto4xx is built as a module).

The descriptor window mapping would end up being free'd
twice, once in crypto4xx_build_pdr() and the second time
in crypto4xx_destroy_sdr().

Fixes: 5d59ad6eea82 ("crypto: crypto4xx - fix crypto4xx_build_pdr, crypto4xx_build_sdr leak")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES

commit cbbaa2727aa3ae9e0a844803da7cef7fd3b94f2b upstream.

KVM does not implement MSR_IA32_TSX_CTRL, so it must not be presented
to the guests.  It is also confusing to have !ARCH_CAP_TSX_CTRL_MSR &&
!RTM && ARCH_CAP_TAA_NO: lack of MSR_IA32_TSX_CTRL suggests TSX was not
hidden (it actually was), yet the value says that TSX is not vulnerable
to microarchitectural data sampling.  Fix both.

Cc: stable@vger.kernel.org
Tested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: do not modify masked bits of shared MSRs

commit de1fca5d6e0105c9d33924e1247e2f386efc3ece upstream.

"Shared MSRs" are guest MSRs that are written to the host MSRs but
keep their value until the next return to userspace.  They support
a mask, so that some bits keep the host value, but this mask is
only used to skip an unnecessary MSR write and the value written
to the MSR is always the guest MSR.

Fix this and, while at it, do not update smsr->values[slot].curr if
for whatever reason the wrmsr fails.  This should only happen due to
reserved bits, so the value written to smsr->values[slot].curr
will not match when the user-return notifier and the host value will
always be restored.  However, it is untidy and in rare cases this
can actually avoid spurious WRMSRs on return to userspace.

Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Tested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i810: Prevent underflow in ioctl

commit 4f69851fbaa26b155330be35ce8ac393e93e7442 upstream.

The "used" variables here come from the user in the ioctl and it can be
negative.  It could result in an out of bounds write.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004102251.GC823@mwanda
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: Fix possible overflow in jbd2_log_space_left()

commit add3efdd78b8a0478ce423bb9d4df6bd95e8b335 upstream.

When number of free space in the journal is very low, the arithmetic in
jbd2_log_space_left() could underflow resulting in very high number of
free blocks and thus triggering assertion failure in transaction commit
code complaining there's not enough space in the journal:

J_ASSERT(journal->j_free > 1);

Properly check for the low number of free blocks.

CC: stable@vger.kernel.org
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: slcan: Fix use-after-free Read in slcan_open

commit 9ebd796e24008f33f06ebea5a5e6aceb68b51794 upstream.

Slcan_open doesn't clean-up device which registration failed from the
slcan_devs device list. On next open this list is iterated and freed
device is accessed. Fix this by calling slc_free_netdev in error path.

Driver/net/can/slcan.c is derived from slip.c. Use-after-free error was
identified in slip_open by syzboz. Same bug is in slcan.c. Here is the
trace from the Syzbot slip report:

__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:634
__asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132
sl_sync drivers/net/slip/slip.c:725 [inline]
slip_open+0xecd/0x11b7 drivers/net/slip/slip.c:801
tty_ldisc_open.isra.0+0xa3/0x110 drivers/tty/tty_ldisc.c:469
tty_set_ldisc+0x30e/0x6b0 drivers/tty/tty_ldisc.c:596
tiocsetd drivers/tty/tty_io.c:2334 [inline]
tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2594
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0xdb6/0x13e0 fs/ioctl.c:696
ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: ed50e1600b44 ("slcan: Fix memory leak in error path")
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: David Miller <davem@davemloft.net>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v5.4
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: vt: keyboard: reject invalid keycodes

commit b2b2dd71e0859436d4e05b2f61f86140250ed3f8 upstream.

Do not try to handle keycodes that are too big, otherwise we risk doing
out-of-bounds writes:

BUG: KASAN: global-out-of-bounds in clear_bit include/asm-generic/bitops-instrumented.h:56 [inline]
BUG: KASAN: global-out-of-bounds in kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline]
BUG: KASAN: global-out-of-bounds in kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495
Write of size 8 at addr ffffffff89a1b2d8 by task syz-executor108/1722
...
 kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline]
 kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495
 input_to_handler+0x3b6/0x4c0 drivers/input/input.c:118
 input_pass_values.part.0+0x2e3/0x720 drivers/input/input.c:145
 input_pass_values drivers/input/input.c:949 [inline]
 input_set_keycode+0x290/0x320 drivers/input/input.c:954
 evdev_handle_set_keycode_v2+0xc4/0x120 drivers/input/evdev.c:882
 evdev_do_ioctl drivers/input/evdev.c:1150 [inline]

In this case we were dealing with a fuzzed HID device that declared over
12K buttons, and while HID layer should not be reporting to us such big
keycodes, we should also be defensive and reject invalid data ourselves as
well.

Reported-by: syzbot+19340dff067c2d3835c0@syzkaller.appspotmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191122204220.GA129459@dtor-ws
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: Fix SMB2 oplock break processing

commit fa9c2362497fbd64788063288dc4e74daf977ebb upstream.

Even when mounting modern protocol version the server may be
configured without supporting SMB2.1 leases and the client
uses SMB2 oplock to optimize IO performance through local caching.

However there is a problem in oplock break handling that leads
to missing a break notification on the client who has a file
opened. It latter causes big latencies to other clients that
are trying to open the same file.

The problem reproduces when there are multiple shares from the
same server mounted on the client. The processing code tries to
match persistent and volatile file ids from the break notification
with an open file but it skips all share besides the first one.
Fix this by looking up in all shares belonging to the server that
issued the oplock break.

Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locks

commit 6f582b273ec23332074d970a7fb25bef835df71f upstream.

Currently when the client creates a cifsFileInfo structure for
a newly opened file, it allocates a list of byte-range locks
with a pointer to the new cfile and attaches this list to the
inode's lock list. The latter happens before initializing all
other fields, e.g. cfile->tlink. Thus a partially initialized
cifsFileInfo structure becomes available to other threads that
walk through the inode's lock list. One example of such a thread
may be an oplock break worker thread that tries to push all
cached byte-range locks. This causes NULL-pointer dereference
in smb2_push_mandatory_locks() when accessing cfile->tlink:

[598428.945633] BUG: kernel NULL pointer dereference, address: 0000000000000038
...
[598428.945749] Workqueue: cifsoplockd cifs_oplock_break [cifs]
[598428.945793] RIP: 0010:smb2_push_mandatory_locks+0xd6/0x5a0 [cifs]
...
[598428.945834] Call Trace:
[598428.945870]  ? cifs_revalidate_mapping+0x45/0x90 [cifs]
[598428.945901]  cifs_oplock_break+0x13d/0x450 [cifs]
[598428.945909]  process_one_work+0x1db/0x380
[598428.945914]  worker_thread+0x4d/0x400
[598428.945921]  kthread+0x104/0x140
[598428.945925]  ? process_one_work+0x380/0x380
[598428.945931]  ? kthread_park+0x80/0x80
[598428.945937]  ret_from_fork+0x35/0x40

Fix this by reordering initialization steps of the cifsFileInfo
structure: initialize all the fields first and then add the new
byte-range lock list to the inode's lock list.

Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/PCI: Avoid AMD FCH XHCI USB PME# from D0 defect

commit 7e8ce0e2b036dbc6617184317983aea4f2c52099 upstream.

The AMD FCH USB XHCI Controller advertises support for generating PME#
while in D0.  When in D0, it does signal PME# for USB 3.0 connect events,
but not for USB 2.0 or USB 1.1 connect events, which means the controller
doesn't wake correctly for those events.

  00:10.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller [1022:7914] (rev 20) (prog-if 30 [XHCI])
        Subsystem: Dell FCH USB XHCI Controller [1028:087e]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Clear PCI_PM_CAP_PME_D0 in dev->pme_support to indicate the device will not
assert PME# from D0 so we don't rely on it.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203673
Link: https://lore.kernel.org/r/20190902145252.32111-1-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: etm4x: Fix input validation for sysfs.

commit 2fe6899e36aa174abefd017887f9cfe0cb60c43a upstream.

A number of issues are fixed relating to sysfs input validation:-

1) bb_ctrl_store() - incorrect compare of bit select field to absolute
value. Reworked per ETMv4 specification.
2) seq_event_store() - incorrect mask value - register has two
event values.
3) cyc_threshold_store() - must mask with max before checking min
otherwise wrapped values can set illegal value below min.
4) res_ctrl_store() - update to mask off all res0 bits.

Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Fixes: a77de2637c9eb ("coresight: etm4x: moving sysFS entries to a dedicated file")
Cc: stable <stable@vger.kernel.org> # 4.9+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: goodix - add upside-down quirk for Teclast X89 tablet

commit df5b5e555b356662a5e4a23c6774fdfce8547d54 upstream.

The touchscreen on the Teclast X89 is mounted upside down in relation to
the display orientation (the touchscreen itself is mounted upright, but the
display is mounted upside-down). Add a quirk for this so that we send
coordinates which match the display orientation.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20191202085636.6650-1-hdegoede@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: oss: Avoid potential buffer overflows

commit 4cc8d6505ab82db3357613d36e6c58a297f57f7c upstream.

syzkaller reported an invalid access in PCM OSS read, and this seems
to be an overflow of the internal buffer allocated for a plugin.
Since the rate plugin adjusts its transfer size dynamically, the
calculation for the chained plugin might be bigger than the given
buffer size in some extreme cases, which lead to such an buffer
overflow as caught by KASAN.

Fix it by limiting the max transfer size properly by checking against
the destination size in each plugin transfer callback.

Reported-by: syzbot+f153bde47a62e0b05f83@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191204144824.17801-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: verify attributes

commit eb59bd17d2fa6e5e84fba61a5ebdea984222e6d5 upstream.

If a filesystem returns negative inode sizes, future reads on the file were
causing the cpu to spin on truncate_pagecache.

Create a helper to validate the attributes.  This now does two things:

 - check the file mode
 - check if the file size fits in i_size without overflowing

Reported-by: Arijit Banerjee <arijit@rubrik.com>
Fixes: d8a5ba45457e ("[PATCH] FUSE - core")
Cc: <stable@vger.kernel.org> # v2.6.14
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: verify nlink

commit c634da718db9b2fac201df2ae1b1b095344ce5eb upstream.

When adding a new hard link, make sure that i_nlink doesn't overflow.

Fixes: ac45d61357e8 ("fuse: fix nlink after unlink")
Cc: <stable@vger.kernel.org> # v3.4
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/fair: Scale bandwidth quota and period without losing quota/period ratio precision

commit 4929a4e6faa0f13289a67cae98139e727f0d4a97 upstream.

The quota/period ratio is used to ensure a child task group won't get
more bandwidth than the parent task group, and is calculated as:

  normalized_cfs_quota() = [(quota_us << 20) / period_us]

If the quota/period ratio was changed during this scaling due to
precision loss, it will cause inconsistency between parent and child
task groups.

See below example:

A userspace container manager (kubelet) does three operations:

 1) Create a parent cgroup, set quota to 1,000us and period to 10,000us.
 2) Create a few children cgroups.
 3) Set quota to 1,000us and period to 10,000us on a child cgroup.

These operations are expected to succeed. However, if the scaling of
147/128 happens before step 3, quota and period of the parent cgroup
will be changed:

  new_quota: 1148437ns,   1148us
 new_period: 11484375ns, 11484us

And when step 3 comes in, the ratio of the child cgroup will be
104857, which will be larger than the parent cgroup ratio (104821),
and will fail.

Scaling them by a factor of 2 will fix the problem.

Tested-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Xuewei Zhang <xueweiz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Phil Auld <pauld@redhat.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Fixes: 2e8e19226398 ("sched/fair: Limit sched_cfs_period_timer() loop to avoid hard lockup")
Link: https://lkml.kernel.org/r/20191004001243.140897-1-xueweiz@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: sunxi: Fix PMU compatible strings

[ Upstream commit 5719ac19fc32d892434939c1756c2f9a8322e6ef ]

"arm,cortex-a15-pmu" is not a valid fallback compatible string for an
Cortex-A7 PMU, so drop it.

Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlx4: Use snprintf instead of complicated strcpy

[ Upstream commit 0fbc9b8b4ea3f688a5da141a64f97aa33ad02ae9 ]

This fixes a compilation warning in sysfs.c

drivers/infiniband/hw/mlx4/sysfs.c:360:2: warning: 'strncpy' output may be
truncated copying 8 bytes from a string of length 31
[-Wstringop-truncation]

By eliminating the temporary stack buffer.

Signed-off-by: Qian Cai <cai@gmx.us>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: stkwebcam: Bugfix for wrong return values

[ Upstream commit 3c28b91380dd1183347d32d87d820818031ebecf ]

usb_control_msg returns in case of a successfully sent message the number
of sent bytes as a positive number. Don't use this value as a return value
for stk_camera_read_reg, as a non-zero return value is used as an error
condition in some cases when stk_camera_read_reg is called.

Signed-off-by: Andreas Pape <ap@ca-pape.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: Don't block on IO when ldisc change is pending

[ Upstream commit c96cf923a98d1b094df9f0cf97a83e118817e31b ]

There might be situations where tty_ldisc_lock() has blocked, but there
is already IO on tty and it prevents line discipline changes.
It might theoretically turn into dead-lock.

Basically, provide more priority to pending tty_ldisc_lock() than to
servicing reads/writes over tty.

User-visible issue was reported by Mikulas where on pa-risc with
Debian 5 reboot took either 80 seconds, 3 minutes or 3:25 after proper
locking in tty_reopen().

Cc: Jiri Slaby <jslaby@suse.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: Return EPERM, not EACCES, in some SETATTR cases

[ Upstream commit 255fbca65137e25b12bced18ec9a014dc77ecda0 ]

As the man(2) page for utime/utimes states, EPERM is returned when the
second parameter of utime or utimes is not NULL, the caller's effective UID
does not match the owner of the file, and the caller is not privileged.

However, in a NFS directory mounted from knfsd, it will return EACCES
(from nfsd_setattr-> fh_verify->nfsd_permission).  This patch fixes
that.

Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: OCTEON: cvmx_pko_mem_debug8: use oldest forward compatible definition

[ Upstream commit 1c6121c39677175bd372076020948e184bad4b6b ]

cn58xx is compatible with cn50xx, so use the latter.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
[paul.burton@mips.com: s/cn52xx/cn50xx/ in commit message.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/math-emu: Update macros from GCC

[ Upstream commit b682c8692442711684befe413cf93cf01c5324ea ]

The add_ssaaaa, sub_ddmmss, umul_ppmm and udiv_qrnnd macros originate
from GCC's longlong.h which in turn was copied from GMP's longlong.h a
few decades ago.

This was found when compiling with clang:

   arch/powerpc/math-emu/fnmsub.c:46:2: error: invalid use of a cast in a
   inline asm context requiring an l-value: remove the cast or build with
   -fheinous-gnu-extensions
           FP_ADD_D(R, T, B);
           ^~~~~~~~~~~~~~~~~
   ...

   ./arch/powerpc/include/asm/sfp-machine.h:283:27: note: expanded from
   macro 'sub_ddmmss'
                  : "=r" ((USItype)(sh)),                                  \
                          ~~~~~~~~~~^~~

Segher points out: this was fixed in GCC over 16 years ago
( https://gcc.gnu.org/r56600 ), and in GMP (where it comes from)
presumably before that.

Update the add_ssaaaa, sub_ddmmss, umul_ppmm and udiv_qrnnd macros to
the latest GCC version in order to git rid of the invalid casts. These
were taken as-is from GCC's longlong in order to make future syncs
obvious. Other parts of sfp-machine.h were left as-is as the file
contains more features than present in longlong.h.

Link: https://github.com/ClangBuiltLinux/linux/issues/260
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx4_core: Fix return codes of unsupported operations

[ Upstream commit 95aac2cdafd8c8298c9b2589c52f44db0d824e0e ]

Functions __set_port_type and mlx4_check_port_params returned
-EINVAL while the proper return code is -EOPNOTSUPP as a
result of an unsupported operation. All drivers should generate
this and all users should check for it when detecting an
unsupported functionality.

Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dlm: fix invalid cluster name warning

[ Upstream commit 3595c559326d0b660bb088a88e22e0ca630a0e35 ]

The warning added in commit 3b0e761ba83
  "dlm: print log message when cluster name is not set"

did not account for the fact that lockspaces created
from userland do not supply a cluster name, so bogus
warnings are printed every time a userland lockspace
is created.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: realview: Fix some more duplicate regulator nodes

[ Upstream commit f3b2f758ec1e6cdb13c925647cbd8ad4938b78fb ]

There's a bug in dtc in checking for duplicate node names when there's
another section (e.g. "/ { };"). In this case, skeleton.dtsi provides
another section. Upon removal of skeleton.dtsi, the dtb fails to build
due to a duplicate node 'fixedregulator@0'. As both nodes were pretty
much the same 3.3V fixed regulator, it hasn't really mattered. Fix this
by renaming the nodes to something unique. In the process, drop the
unit-address which shouldn't be present wtihout reg property.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi-ng: h3/h5: Fix CSI_MCLK parent

[ Upstream commit 7bb7d29cffdd24bf419516d14b6768591e74069e ]

The third parent of CSI_MCLK is PLL_PERIPH1, not PLL_PERIPH0.
Fix it.

Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks")
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: pxa: clean up USB controller nodes

[ Upstream commit c40ad24254f1dbd54f2df5f5f524130dc1862122 ]

PXA25xx SoCs don't have a USB controller, so drop the node from the
common pxa2xx.dtsi base file. Both pxa27x and pxa3xx have a dedicated
node already anyway.

While at it, unify the names for the nodes across all pxa platforms.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Reported-by: Sergey Yanovich <ynvich@gmail.com>
Link: https://patchwork.kernel.org/patch/8375421/
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: fix mtd_oobavail() incoherent returned value

[ Upstream commit 4348433d8c0234f44adb6e12112e69343f50f0c5 ]

mtd_oobavail() returns either mtd->oovabail or mtd->oobsize. Both
values are unsigned 32-bit entities, so there is no reason to pretend
returning a signed one.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: fix single target build for external module

[ Upstream commit e07db28eea38ed4e332b3a89f3995c86b713cb5b ]

Building a single target in an external module fails due to missing
.tmp_versions directory.

For example,

  $ make -C /lib/modules/$(uname -r)/build M=$PWD foo.o

will fail in the following way:

  CC [M]  /home/masahiro/foo/foo.o
/bin/sh: 1: cannot create /home/masahiro/foo/.tmp_versions/foo.mod: Directory nonexistent

This is because $(cmd_crmodverdir) is executed only before building
/, %/, %.ko single targets of external modules. Create .tmp_versions
in the 'prepare' target.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

modpost: skip ELF local symbols during section mismatch check

[ Upstream commit a4d26f1a0958bb1c2b60c6f1e67c6f5d43e2647b ]

During development of a serial console driver with a gcc 8.2.0
toolchain for RISC-V, the following modpost warning appeared:

----
WARNING: vmlinux.o(.data+0x19b10): Section mismatch in reference from the variable .LANCHOR1 to the function .init.text:sifive_serial_console_setup()
The variable .LANCHOR1 references
the function __init sifive_serial_console_setup()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
----

".LANCHOR1" is an ELF local symbol, automatically created by gcc's section
anchor generation code:

https://gcc.gnu.org/onlinedocs/gccint/Anchored-Addresses.html

https://gcc.gnu.org/git/?p=gcc.git;a=blob;f=gcc/varasm.c;h=cd9591a45617464946dcf9a126dde277d9de9804;hb=9fb89fa845c1b2e0a18d85ada0b077c84508ab78#l7473

This was verified by compiling the kernel with -fno-section-anchors
and observing that the ".LANCHOR1" ELF local symbol disappeared, and
modpost no longer warned about the section mismatch.  The serial
driver code idiom triggering the warning is standard Linux serial
driver practice that has a specific whitelist inclusion in modpost.c.

I'm neither a modpost nor an ELF expert, but naively, it doesn't seem
useful for modpost to report section mismatch warnings caused by ELF
local symbols by default.  Local symbols have compiler-generated
names, and thus bypass modpost's whitelisting algorithm, which relies
on the presence of a non-autogenerated symbol name.  This increases
the likelihood that false positive warnings will be generated (as in
the above case).

Thus, disable section mismatch reporting on ELF local symbols.  The
rationale here is similar to that of commit 2e3a10a1551d ("ARM: avoid
ARM binutils leaking ELF local symbols") and of similar code already
present in modpost.c:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/scripts/mod/modpost.c?h=v4.19-rc4&id=7876320f88802b22d4e2daf7eb027dd14175a0f8#n1256

This third version of the patch implements a suggestion from Masahiro
Yamada <yamada.masahiro@socionext.com> to restructure the code as an
additional pattern matching step inside secref_whitelist(), and
further improves the patch description.

Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: fix SNMP TCP timeout under-estimation

[ Upstream commit e1561fe2dd69dc5dddd69bd73aa65355bdfb048b ]

Previously the SNMP TCPTIMEOUTS counter has inconsistent accounting:
1. It counts all SYN and SYN-ACK timeouts
2. It counts timeouts in other states except recurring timeouts and
   timeouts after fast recovery or disorder state.

Such selective accounting makes analysis difficult and complicated. For
example the monitoring system needs to collect many other SNMP counters
to infer the total amount of timeout events. This patch makes TCPTIMEOUTS
counter simply counts all the retransmit timeout (SYN or data or FIN).

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>