Yong Qin [Mon, 29 Jul 2019 06:33:30 +0000 (14:33 +0800)]
vlock: cvbs out mode not enable vlock [1/1]
PD#SWPL-11885
Problem:
vlock changed the cvbs out FRQ
Solution:
VOUT_FR_ADJ_NONE cvbs out mode not support vlock
Verify:
TL1
Change-Id: Ic8891e4f63ae36839bc1c8b6c7b1552ad7bc0994
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
yao liu [Thu, 1 Aug 2019 06:52:53 +0000 (02:52 -0400)]
dolby: TM2 black screen on 4k60hz [1/1]
PD#SWPL-11431
Problem:
black screen on 4k60hz
display abnormal on 1080p24hz/1080i/576p/480p
Solution:
1.Adjust potch according to resolution
2.Add tm2 in is_graphics_output_off
3.Move osd sc to the back of core2
Verify:
Verified on TM2
Change-Id: Ida1b4a67b3a7233d3a03b0536d246a0bd677e90c
Signed-off-by: yao liu <yao.liu@amlogic.com>
Zongdong Jiao [Tue, 2 Jul 2019 06:23:38 +0000 (14:23 +0800)]
hdmitx: optimise the mode setting sequence [2/2]
PD#SWPL-10600
Problem:
When hdmitx output deep color modes (30 or 36 bits), the Hactive
may set wrong values, offset +1.
Solution:
Optimise the mode setting sequence: disable VENC, PHY configure,
core configure / reset, enable VENC
Verify:
G12B/W400
Change-Id: Id19b4441ccee3a7d3d81c3d55dbd9102762fe992
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Pengcheng Chen [Wed, 24 Jul 2019 08:18:17 +0000 (16:18 +0800)]
rdma: add rdma conflict check [1/1]
PD#SWPL-12134
Problem:
fix rdma write error caused display abnormal
Solution:
add rdma conflict check,correct rdma register error.
Verify:
verify on w400
Change-Id: I6a8866f517ed5b379729e348d34615c77553844a
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Gongwei Chen [Fri, 2 Aug 2019 06:29:29 +0000 (14:29 +0800)]
dts: Multi-screen enable [2/3]
PD#SWPL-12213
Problem:
Multi-screen support.
Solution:
Display is blank when panel use the same clk with cvbs.
Verify:
1. Primary screen display with HDMI.
2. Extend screen display with panel.
3. Primary and extend screen can display the same UI or difference.
Change-Id: Id2189c32a8ee4bb0c1384352d91536c7310d5670
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
Bencheng Jing [Wed, 31 Jul 2019 09:48:48 +0000 (17:48 +0800)]
di: fix pulldown 22 enter slow patch from vlsi-LiuYanling [1/1]
PD#SWPL-12061
Problem:
film 22 detection threshold is high
Solution:
adjust the threshold lower
Verify:
sm1
Change-Id: I8e01e910b4a08aefdbde18fe1033bcb45e85b338
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Pengcheng Chen [Thu, 1 Aug 2019 08:16:24 +0000 (16:16 +0800)]
vpp: if vinfo mode is null or invalid, not update post2_matirx [1/1]
PD#SWPL-11561
Problem:
UI display abnormal when switch from sdr tv to dv tv,
issue happened when dv tv support hdr also, it first
switch to hdr mode, then switch agian to dv mode.
Solution:
if vinfo mode is null or invalid, not update post2_matirx
Verify:
Verify on sm1
Change-Id: I6cc87ae2d5569d66b312bf47508e626298f9f98a
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Yan Wang [Mon, 27 May 2019 06:56:47 +0000 (14:56 +0800)]
dolbyfw: axg: update for sonos dolby fw [1/1]
PD#SH-561
Problem:
sonos dolby fw request
Solution:
update critical data interface for dolby fw request;
compatible with trunk dolby fw.
Verify:
S400
Change-Id: Id20d9c9867f3e5de4ea5ca9bb260cbac152a99df
Signed-off-by: Yan Wang <yan.wang@amlogic.com>
Cao Jian [Tue, 30 Jul 2019 13:51:34 +0000 (21:51 +0800)]
osd: overflow on 4k src height/width left-shift [1/1]
PD#SWPL-10952
Problem:
osd for 4k native UI
Solution:
modify u32 to u64 for left-shift
Verify:
verified on g12b-w400
Change-Id: I9e98e3b5769d61132570f3f4bb1f47694cffde8f
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
Xihai Zhu [Wed, 3 Jul 2019 11:47:12 +0000 (07:47 -0400)]
amvecm: add option for applying gamma [1/1]
PD#SWPL-11288
Problem:
we'd better provide the flexibility
for gamma applying protection
Solution:
add option to let user to choose
if the applying protection is needed
or not
Verify:
tl1
Change-Id: I3f215545c7921134a282571d7f734bb8b42d553e
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Jian Hu [Wed, 8 May 2019 11:52:28 +0000 (19:52 +0800)]
clk: tl1: add clk81 mux clock [1/1]
PD#SWPL-8215
Problem:
1.clk81 can not switch to 24M
2.fixed pll can set rate
call clk_prepare_enable to open it
call clk_disable_unprepare to close it
Solution:
1.add clk81 mux clock
2.change fixed pll callback Read only to R/W
Verify:
test passed on tm2 ab301
Change-Id: I426d4307f19647afcb0166a23c1988df1b504807
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Shunzhou Jiang [Thu, 14 Feb 2019 02:09:50 +0000 (10:09 +0800)]
clk: tl1: fix hifi clk can not work issue [1/1]
PD#SWPL-3825
Problem:
hifi clk can not work
Solution:
add hifi clk table
Verify:
X301
Change-Id: I89699e14077b9046900fec5665b76fb6bb4e080a
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Zongdong Jiao [Thu, 1 Aug 2019 06:43:18 +0000 (14:43 +0800)]
eARCrx: add hdmitx hpd notify [1/1]
PD#SWPL-6861
Problem:
Wrong val for init bandgap
Solution:
If PHY_CNTL0 is 0, then enable it, otherwise no need.
Verify:
SM1/AC200
Change-Id: I9e4a7bbe5d4b02cd8e9b2d5da87b4e572bdeb67e
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Yingyuan Zhu [Mon, 29 Jul 2019 06:54:57 +0000 (14:54 +0800)]
gpio_key: fix request gpio failed issue [1/1]
PD#SWPL-11929
Problem:
request gpio failed but the probe function continued
to execute successfully.
Solution:
add return value judgment.
Verify:
test pass on g12a
Change-Id: Iab04b8440a4ecb340d98baee7b1e0df5692739e7
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
Yong Qin [Thu, 25 Jul 2019 06:18:52 +0000 (14:18 +0800)]
vdin: 1080p 444 10bit mode buffer size not right [1/1]
PD#TV-7702
Problem:
1.1080p 444 10bit mode, buffer size is not big enough.
alloc as 444 8bit mode.
2.4k afbc not support 10bit mode
Solution:
hdr mode 4k, disable afbc mode.
Verify:
tl1 ref board
Change-Id: I3284a5279c08f360faaeaaf4e6ab47a9008f0da6
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Xihai Zhu [Thu, 25 Jul 2019 06:28:36 +0000 (02:28 -0400)]
amvecm: fix LC noise under SD blue pattern [1/1]
PD#SWPL-11532
Problem:
blue raster pattern show heavy noise
under sd HDMI input
Solution:
it is cuased by incorrect color matrix
set matrix based on the signal type
Verify:
tl1
Change-Id: I36ae74fd0f7762d270c5ea908a817dabb9516d56
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Zongdong Jiao [Wed, 31 Jul 2019 07:30:56 +0000 (15:30 +0800)]
eARCrx: add hdmitx hpd notify [1/1]
PD#SWPL-6861
Problem:
Lack hdmitx hpd event notify to eARC
Solution:
Add hdmitx hpd event notify to eARC in HPD interrupt handler
w/o any delay.
Verify:
TBD
Change-Id: Ic7f35365a2af634dee604f7121d62738b4b17a8d
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Jianxin Pan [Wed, 31 Jul 2019 07:19:06 +0000 (00:19 -0700)]
Revert "eARCrx: add hdmitx hpd notify [1/1]"
This reverts commit
93343170955d94aa45518edca907ba85a917e6ce.
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Change-Id: I198c244e0d6877776c966983d00fb554767f3fe0
Zongdong Jiao [Wed, 10 Apr 2019 01:58:59 +0000 (09:58 +0800)]
eARCrx: add hdmitx hpd notify [1/1]
PD#SWPL-6861
Problem:
Lack hdmitx hpd event notify to eARC
Solution:
Add hdmitx hpd event notify to eARC in HPD interrupt handler w/o
any delay.
Verify:
TBD
Change-Id: Iaff59f3144e4a03db32110d438d14012ab2fed81
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Bencheng Jing [Fri, 26 Jul 2019 09:22:43 +0000 (17:22 +0800)]
di: fix the abnormal white color noise [1/2]
PD#SWPL-7049
Problem:
abnormal white color noise
Solution:
add G12a/G12b/sm1 chip in the deghost patch
Verify:
sm1
Change-Id: Ib3f4f0500712ff2aac8d5eb9cd137f8a3d3fe0f1
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Bencheng Jing [Sat, 6 Apr 2019 10:40:06 +0000 (18:40 +0800)]
amvecm: add 3x65 bin gamma setting function [1/1]
PD#SWPL-6644
Problem:
add 3x65 bin gamma function
Solution:
add 3x65 bin gamma function
Verify:
tm2
Change-Id: I1f70af4b7ad6b5906004c1912e2b8f5e4366da4e
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Bencheng Jing [Mon, 29 Jul 2019 12:17:08 +0000 (20:17 +0800)]
di: fix the sawtooth because of not into pulldown 22 timely [1/1]
PD#SWPL-10382
Problem:
not into pulldown 22 timely
Solution:
The judgment condition is wider for pulldown 22
Verify:
sm1
Change-Id: Id99c0c997b0954dee0a06b7e6dfd60feded73b30
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
nengwen.chen [Tue, 23 Jul 2019 07:21:05 +0000 (15:21 +0800)]
atv_demod: fix synchronization problem when get frontend [1/1]
PD#TV-8131
Problem:
fix synchronization problem when get frontend.
Solution:
1.fix synchronization problem when get frontend.
Verify:
Verified by x301
Change-Id: Ic0580a83448fe75529615ffa08cb526e205ef9a8
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Bencheng Jing [Thu, 25 Jul 2019 13:02:20 +0000 (21:02 +0800)]
di: fix the flash mosaic caused by cue [1/1]
PD#SWPL-11034
Problem:
flash mosaic when play VTS_13_1.VOB
Solution:
adjust cue function
Verify:
sm1
Change-Id: If188f49f3972e5da2b2fe4e917bb6e1b14163569
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Sunny Luo [Tue, 30 Jul 2019 08:02:11 +0000 (16:02 +0800)]
spi: export the spi_register_board_info for ko [1/1]
PD#SWPL-9815
Problem:
spi_register_board_info's export has been removed in kernel 4.9,
but TV need to use it in ko.
Solution:
package it in a new dirspi_register_board_info and export
Verify:
T312
Change-Id: Ic7e5d8cef6840551e2925eda6162156320877833
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
shuanglong.wang [Mon, 22 Jul 2019 11:03:25 +0000 (19:03 +0800)]
video: do not update omx_pts if not continus drop [1/1]
PD#SWPL-9676
Problem:
netflix pause for a relative long time and resume, will occur freeze
Solution:
1.do not update omx_pts if not continus drop
2.omxpts not update for while, no compensate omxpts
Verify:
verify by nts
Change-Id: I4eef7b6aff44077e78fc704e26d8bab441a1b36b
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
Hang Cheng [Fri, 26 Jul 2019 09:29:14 +0000 (17:29 +0800)]
hdmitx: modify fractional part of hpll for gxtvbb [1/1]
PD#TV-8224
Problem:
hdmitx output clk is not right, actually output 145Mhz
when expect to output 148.5Mhz. for gxtvbb, bit[11]
of DIV_FRAC bit[11:0] is used for +/- symbol, but now
is used for fractional weight by mistake.
Solution:
change back to original setting for DIV_FRAC
Verify:
TCL-T966
Change-Id: Idd34a745d4b74a0bd9e6f2b3542af94731d5badd
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
Yan Wang [Mon, 24 Dec 2018 06:51:28 +0000 (14:51 +0800)]
idle: power: tl1 need support CPU idle [1/1]
PD#SWPL-3525
Problem:
tl1 need support cpu idle.
Solution:
tl1 enable cpu idle.
Verify:
T962x2 x301
Change-Id: I14179975bbc1856418abbf32bccbfbf8d8462e4f
Signed-off-by: Yan Wang <yan.wang@amlogic.com>
Long Yu [Tue, 30 Jul 2019 02:26:02 +0000 (10:26 +0800)]
emmc: modified the fixed adj tuning mode for HS200 [1/1]
PD#SWPL-11917
Problem:
Data sampling window has discontinuity
Solution:
Move the data as a whole to find a continuous data window
Verify:
txlx
Change-Id: I76fd41c22ff4c9e2e40b2b47580e25e0284ffbfa
Signed-off-by: Long Yu <long.yu@amlogic.com>
Maarten Lankhorst [Thu, 23 Nov 2017 10:37:37 +0000 (11:37 +0100)]
drm/vblank: Pass crtc_id to page_flip_ioctl.
PD#SWPL-4863
We added crtc_id to the atomic ioctl, but forgot to add it for vblank
and page flip events. Commit
bd386e518056 ("drm: Reorganize
drm_pending_event to support future event types [v2]") added it to
the vblank event, but page flip event was still missing.
Correct this and add a test for making sure we always set crtc_id correctly.
Change-Id: Idd1070005d88529500a8be868f714c8bb345ddee
Fixes:
bd386e518056 ("drm: Reorganize drm_pending_event to support future event types [v2]")
Fixes:
5db06a8a98f5 ("drm: Pass CRTC ID in userspace vblank events")
Cc: Daniel Stone <daniels@collabora.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.12+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #irc
Testcase: igt/kms_vblank/crtc_id
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123103737.47138-1-maarten.lankhorst@linux.intel.com
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
changqing.gao [Mon, 29 Jul 2019 05:53:02 +0000 (13:53 +0800)]
dts: sm1: camera preview would cause garbage [1/1]
PD#SWPL-11884
Problem:
camera preview would cause garbage.
Solution:
modify the previous change:
38e45fb998269d36f41a7b004be51ba9f1e7bef9
not to remove vdin0_cma_reserved.
Verify:
test passed on sm1
Change-Id: Ie20de9b3562f7c83fa73bd88acab7770ca8c3b0a
Signed-off-by: changqing.gao <changqing.gao@amlogic.com>
Jianxiong Pan [Tue, 30 Jul 2019 01:57:56 +0000 (09:57 +0800)]
scripts: fixed an issue that could cause an infinite loop. [1/1]
PD#SWPL-12025
Problem:
the merge_pre_check.pl script has an bug that may enter an infinite loop,
causing problems.
Solution:
add the length of the detection conditions.
Verify:
local test.
Change-Id: I48fe839678ea0884a9082197eab083a2b8f489cd
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Cao Jian [Fri, 26 Jul 2019 09:46:04 +0000 (17:46 +0800)]
osd: osd_mmap no more locks to release [1/1]
PD#SWPL-11768
Problem:
release one more mutex in osd_mmap
Solution:
remove mutex release in osd_mmap
Verify:
Verfied on p212
Change-Id: I139b80590740717ced321171ee665d0f6c0cd83f
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
Keith Packard [Wed, 5 Jul 2017 21:34:23 +0000 (14:34 -0700)]
drm: Reorganize drm_pending_event to support future event types [v2]
PD#SWPL-4863
Place drm_event_vblank in a new union that includes that and a bare
drm_event structure. This will allow new members of that union to be
added in the future without changing code related to the existing vbl
event type.
Assignments to the crtc_id field are now done when the event is
allocated, rather than when delievered. This way, delivery doesn't
need to have the crtc ID available.
v2:
* Remove 'dev' argument from create_vblank_event
It wasn't being used anyways, and if we need it in the future,
we can always get it from crtc->dev.
* Check for MODESETTING before looking for crtc in queue_vblank_event
UMS drivers will oops if we try to get a crtc, so make sure
we're modesetting before we try to find a crtc_id to fill into
the event.
(cherry picked from commit
dc695b85fde88eca3ef3b03fcd82f15b6bc6e462)
Change-Id: I6f0feabcba9373fcc434b148752d9cd28bea67e6
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
Brian Zhu [Mon, 29 Jul 2019 05:52:45 +0000 (13:52 +0800)]
amcsc: remove the vout_device is NULL log [1/1]
PD#SWPL-11922
Problem:
When the vout_device point is NULL, amcsc will print too
many logs.
Solution:
Remove this warning log since the vout_device = NULL is
normal under TV or CVBS case.
Verify:
Verified by X301
Change-Id: I007e3970b8361e0cd79bfc81ee5205cbb262c0c1
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
lingjie li [Fri, 5 Jul 2019 09:27:04 +0000 (17:27 +0800)]
drm: start hdcp work when the "Content Protection" was set thought atomic [1/1]
PD#SWPL-4866
Problem:
1. The old implement not support atomic. (the atomic check on am_meson
hdmi.c will disable CP,The set property function will not reached when
use atomic set CP)
2. The hdcp work kthread start and terminal not match cause coredump.
Problem:
need add hdcp function.
Solution:
Start hdcp work when the encoder enabled.stop when encoder disabled.
modified hdcp work state machine.
Verify:
On u212 drm backend, use drm-helper-client to set CP property.
need enable atomic on wayland.based on below CL
http://scgit.amlogic.com:8080/#/c/78810/1
http://scgit.amlogic.com:8080/#/c/78804/2
http://scgit.amlogic.com:8080/#/c/78811/1
Change-Id: If213b7def89ff1f1ec63b866a21a3323e098786f
Signed-off-by: lingjie li <lingjie.li@amlogic.com>
libo [Fri, 18 May 2018 12:47:38 +0000 (20:47 +0800)]
wifi: add tcp delay ack support [1/1]
PD#OTT-5388
Problem:
wifi rx throughput issue
Solution:
add tcp delay ack support
enable tcp dealy ack by following command:
echo 1 > /proc/sys/net/ipv4/tcp_use_userconfig
echo 60 > /proc/sys/net/ipv4/tcp_delack_seg
Verify:
u211
Change-Id: I060810b2800bae377388ba6ed9f9256597c9e6ea
Signed-off-by: libo <bo.li@amlogic.com>
Ao Xu [Mon, 29 Jul 2019 08:35:36 +0000 (16:35 +0800)]
drm: Pass CRTC ID in userspace vblank events
PD#SWPL-4863
With the atomic API, it is possible that a single commit affects
multiple crtcs. If the user requests an event with that commit, one
event will be sent for each CRTC, but it is not possible to distinguish
which crtc an event is for in user space. To solve this, the reserved
field in struct drm_vblank_event is repurposed to include the crtc_id
which the event is for.
The DRM_CAP_CRTC_IN_VBLANK_EVENT is added to allow userspace to query if
the crtc field will be set properly.
[daniels: Rebased, using Maarten's forward-port.]
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Maarten Lankhorst <maarten.lankhorst@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170404165221.28240-2-daniels@collabora.com
Change-Id: Ide7657bdc38563d2de91edc2d649b53262002c39
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
yujie.wu [Mon, 15 Jul 2019 11:38:01 +0000 (19:38 +0800)]
audio: Disable Resample module for SPDIFIn [1/2]
PD#SWPL-9922
Problem:
The spdif input doesn't work
Solution:
Disable resample module for Spdif in
Verify:
A113
Change-Id: I459555d485641884cc026459ebb4a92d99157d8a
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
Zhuo Wang [Fri, 19 Jul 2019 03:13:02 +0000 (11:13 +0800)]
ethernet: debug function for reset [1/1]
PD#SWPL-11505
Problem:
STR may crash
Solution:
improve the suspend/rusume flow
Verify:
verify on g12a u200 board
Change-Id: Ie7b4759fd0d801c83eb3c1c314c402ae470b5e3f
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
Yong Qin [Tue, 23 Jul 2019 09:02:34 +0000 (17:02 +0800)]
vdin: dec stop port close vdin flag is not right [1/1]
PD#TV-7934
Problem:
when port not open complitly, needn't send event to tv server
Solution:
add a condition to pretect
Verify:
tl1
Change-Id: I4fb6d7d1d247381c9cb13acabeece56dd6b6d1bc
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
shaochan.liu [Fri, 12 Jul 2019 05:20:52 +0000 (13:20 +0800)]
lcd: tcon: set od function [2/2]
PD#TV-7435
Problem:
when enable od function, the left half of the screen
display is abnormal after boot
Solution:
set od function
Verify:
x301
Change-Id: Ibe4f2e7e5d9bc46c6ce880715103e2cc69d4625b
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
hualing chen [Wed, 3 Jul 2019 06:21:20 +0000 (14:21 +0800)]
dvb: ci mcu: control CAM throw mcu and used api to control mcu. [2/9]
PD#SWPL-10659
Problem:
tsin and tsout pin not config.
ci mcu dts not add config.
Solution:
1 add tsin and tsout pinmux config.
2 add ci mcu dts config.
Verify:
verified on t962x3-t312 box.
Change-Id: Id8c271e41736e337c12141f879e97bc9673bb99e
Signed-off-by: hualing chen <hualing.chen@amlogic.com>
Hong Guo [Tue, 23 Apr 2019 07:38:33 +0000 (15:38 +0800)]
cpufreq: update dvfs voltage and pwm for g12b revb [1/1]
PD#SWPL-7636
Problem:
update dvfs voltage and pwm for g12b revb
Solution:
update dvfs voltage and pwm for g12b revb
Verify:
update dvfs voltage and pwm for g12b revb
Change-Id: I29deea791126fcb1819be380ed81bc2aa29eeec6
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Evoke Zhang [Fri, 26 Jul 2019 10:39:26 +0000 (18:39 +0800)]
avin_detect: fix avin_detect_flag mistak in probe [1/1]
PD#TV-7797
Problem:
cat detect avin signal
Solution:
fix avin_detect_flag in probe
Verify:
x301
Change-Id: I2ee1f7fa243d31262f4e156e84e63440fe812c09
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
robin zhu [Tue, 25 Jun 2019 20:02:14 +0000 (13:02 -0700)]
dv: support PIP [1/1]
PD#SWPL-9950
Problem:
not support VD1+VD2 PIP for DV+None_DV or 2xNone_DV
need bypass HDR+ to HDR module when Sink support
need always bypass to HDR module for HLG
not fully support convert between format SDR/HDR(+)/HLG
not support convert all format to IPT(DV)
not support follow sink/follow src policy for PIP
Solution:
add full matrix support to convert between SDR/HDR formats
add support to convert all format to IPT(DV)
rewrite policy, video process and tx handing for PIP
Verify:
tested and merged in raven project
need test on for src
need test for sink(has regression, need to fix)
Change-Id: I001d9dcdcb94c95fb2b7651e726d1ebadc8f4551
Signed-off-by: robin zhu <robin.zhu@amlogic.com>
xianjun.liu [Tue, 23 Jul 2019 03:14:19 +0000 (11:14 +0800)]
MTD: slc-nand: fix signed integer overflow in erase_bootloader [1/1]
PD#SWPL-11771
Problem:
Hackers can use signed integer erase_boot_num to cause systems crash
Solution:
replace signed variable with unsigned variables
Verify:
AXG-S400
Change-Id: I9cc8d8f43c199f48e7d7bff2664bca740681d274
Signed-off-by: xianjun.liu <xianjun.liu@amlogic.com>
xianjun.liu [Mon, 22 Jul 2019 10:02:10 +0000 (18:02 +0800)]
MTD: reset some important buf before free the buf [1/1]
PD#SWPL-11772
Problem:
Inadequate clearing of keys/dtbs/env buf in memory
Solution:
clear the corresponding buf before free the buf
Verify:
AXG-S400
Change-Id: I61971c11a41c7062270a3863ae711c856d66f332
Signed-off-by: xianjun.liu <xianjun.liu@amlogic.com>
xianjun.liu [Tue, 25 Jun 2019 07:31:30 +0000 (15:31 +0800)]
Mtd: fix check return value for copy_from_user in uboot_write method [1/1]
PD#SWPL-11776
Problem:
missing return value check for copy_from_user in uboot_write method
Solution:
checking return value after call copy_from_user/copy_to_user
Verify:
AXG-S420
Change-Id: I087a341cbf0b603b2898e81773dc266d8e3debe1
Signed-off-by: xianjun.liu <xianjun.liu@amlogic.com>
jiejing.wang [Wed, 24 Jul 2019 08:21:55 +0000 (16:21 +0800)]
license: add license for audio source file [1/2]
PD#SWPL-11716
Problem:
some audio source has no license
Solution:
add license for audio source file
Verify:
verify by locally
Change-Id: I85e7a27a724f1d255e38f4a878475b38abc1dfd4
Signed-off-by: jiejing.wang <jiejing.wang@amlogic.com>
Evoke Zhang [Tue, 23 Jul 2019 08:11:10 +0000 (16:11 +0800)]
avin_detect: optimize avin detect driver [1/1]
PD#TV-7797
Problem:
avin ch2 affect to ch1 display
Solution:
optimize avin detect driver, add debug print
Verify:
x301
Change-Id: Icc89c5b44f187a30971e8c53c3019297ce72b816
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Hong Guo [Thu, 25 Jul 2019 08:20:45 +0000 (16:20 +0800)]
dvfs: update cpu clk after adjust cpufeq for g12b big core [1/1]
PD#SWPL-11796
Problem:
update cpu clk after adjust cpufeq
Solution:
update cpu clk after adjust cpufeq
Verify:
test pass on g12b_w400
Change-Id: I5e4593e4b65de5f7536ddde793d682cc67df0e64
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Jian Hu [Thu, 25 Jul 2019 03:54:02 +0000 (11:54 +0800)]
clk: g12a/b: add aclk_lock init [1/1]
PD#SWPL-11765
Problem:
open CONFIG_LOCK_STAT
BUG: spinlock bad magic on CPU#2, swapper/0/1
lock: aclk_lock+0x0/0x28, .magic:
00000000, .owner: swapper/0/1, .owner_cpu: 2
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.9.113 #1
Hardware name: Generic DT based system
[
bc001a5c+ 16][<
c020e5f4>] show_stack+0x20/0x24
[
bc001a84+ 40][<
c06161e8>] dump_stack+0xb8/0xf4
[
bc001aac+ 40][<
c02a1428>] spin_dump+0xa0/0xf0
[
bc001acc+ 32][<
c02a1744>] do_raw_spin_unlock+0xb8/0x138
[
bc001ae4+ 24][<
c0fa35f4>] _raw_spin_unlock_irqrestore+0x34/0x9c
[
bc001b2c+ 72][<
c0690ce4>] clk_mux_set_parent+0xc0/0x148
[
bc001b3c+ 16][<
c06911d8>] clk_composite_set_parent+0x3c/0x40
[
bc001b6c+ 48][<
c068cccc>] clk_core_set_parent+0x18c/0x42c
[
bc001b7c+ 16][<
c068cf98>] clk_set_parent+0x2c/0x30
[
bc001bb4+ 56][<
c0ca7ad8>] aml_tdm_platform_probe+0x27c/0x748
[
bc001bd4+ 32][<
c06d69e0>] platform_drv_probe+0x60/0xc0
[
bc001bfc+ 40][<
c06d4734>] driver_probe_device+0x214/0x2c0
Solution:
add aclk_lock init
Verify:
test passed on g12b
Change-Id: I1214d044c279865065de237bfb1ecc7f9ea71699
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
renjiang.han [Thu, 4 Jul 2019 07:34:36 +0000 (15:34 +0800)]
ppmgr: Unbound kstrdup and Potential Null Dereference. [1/1]
PD#OTT-4872
Problem:
Unbound kstrdup and Potential Null Dereference.
Solution:
Add a judgment on the return value and the null pointer.
Verify:
on u212
Change-Id: I1e493c8125e08d4a6fb9fb46f28309eba6f0e47b
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
Pengcheng Chen [Tue, 23 Jul 2019 02:24:04 +0000 (10:24 +0800)]
dv: fix Buffer overflow in amdolby_vision due to string processing [1/1]
PD#OTT-5058
Problem:
Buffer overflow in amdolby_vision due to string processing
Solution:
add buffer limited when string buffer accepting commands (namely *parm);
Verify:
verified on Raven
Change-Id: Icd550f331efb2ee46e2f270e516df9942837f93d
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Jihong Sui [Wed, 24 Jul 2019 09:12:27 +0000 (17:12 +0800)]
deinterlace: add condition for force_prog [1/1]
PD#SWPL-11550
Problem:
force_prog only for progressive.
Solution:
add condition for force_prog
Verify:
TL1
Change-Id: I44e165c779eefcefcc18a286e66a598ffef1294f
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Chia-hung Duan [Wed, 3 Jul 2019 06:40:41 +0000 (14:40 +0800)]
build: fix uninitialized-use when build with prebuilt toolchain [1/1]
PD#SWPL-8241
Problem:
** SYNC FROM GOOGLE **
Build failed due to uninitialzed variable
Solution:
Init to reasonable value
Verify:
Build with Android prebuilt toolchain
Change-Id: I09615276b48b6253f8084743a7d50081cfc24ec4
Signed-off-by: Shuide Chen <shuide.chen@amlogic.com>
Shuai Li [Mon, 22 Jul 2019 06:13:48 +0000 (14:13 +0800)]
audio: Fix panic on add_timer [1/1]
PD#TV-7920
Problem:
Audio drive caused kernel panic.
BUG_ON timer_pending.
Solution:
Add timer will panic calling add_timer.
If timer is pending we need use mod_timer
to deal with this case.
Verify:
T962
Change-Id: Ib4143de384af40803609c3513ad07eeb3fe59bbf
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
renjiang.han [Wed, 24 Jul 2019 11:56:12 +0000 (19:56 +0800)]
amlvideo2: screenshot buffer leak. [1/1]
PD#TV-7948
Problem:
Amlvideo2 will not put the last buffer of vdin back.
Solution:
Return temp vf to vdin in amlvideo2.
Verify:
on X301
Change-Id: I6f7f604a8a0fa8f577d50e242968e0aa52450cda
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
Evoke Zhang [Fri, 28 Jun 2019 10:16:12 +0000 (18:16 +0800)]
tvafe: vbi: optimize vbi data parse [1/1]
PD#SWPL-10532
Problem:
teletext sometimes display abnormal
Solution:
optimize vbi data parse
Verify:
x301
Change-Id: I879208fd05dd188dc84fde7dd32a1c64504c57f8
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Bichao Zheng [Thu, 18 Jul 2019 06:42:25 +0000 (14:42 +0800)]
irblaster: add irblaster support for tm2 t312 [1/1]
PD#SWPL-9909
Problem:
Need add irblaster support for tm2 T312.
Solution:
1. Enable irblaster controller.
2. Mux GPIOAO_4 to IR_REMOTE_OUT.
Verify:
verified on tm2 t96e2
Change-Id: If40c84c0dff0c1d771cd6bccc1c3ac5af8e728fd
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
qi duan [Tue, 9 Jul 2019 12:27:45 +0000 (08:27 -0400)]
ethernet: g12a/b exphy use autocali [1/1]
PD#SWPL-10391
Problem:
g12b revA and revB need one code for two parameter
Solution:
if autocali in uboot, use autocali result
if no autocali,use the dts para
Verify:
verify on g12b w400 board,revA and revB
Change-Id: I4b48c67fba25eba4cb286470557ff0777009ec9f
Signed-off-by: qi duan <qi.duan@amlogic.com>
Evoke Zhang [Sun, 5 May 2019 09:39:01 +0000 (05:39 -0400)]
vpu: fix mem_pd reg4 mistake for local dimming [1/1]
PD#SWPL-6798
Problem:
vpu mem_pd reg4 config is incorrect
Solution:
fix mem_pd reg4 config
Verify:
ab301
Change-Id: Ibeb732051c2ad4b46e55f66fe05fce440b450263
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Xiaoming Sui [Fri, 14 Jun 2019 09:59:54 +0000 (17:59 +0800)]
avsync: video: fix avsync issue when hdmiin [2/3]
PD#TV-6148
Problem:
the avsync test is failed when hdmiin.
Solution:
add the delay check and setting when avsync is lost.
Verify:
X301
Change-Id: I53c1a7f0ddb907afa83fbf65b280d1d1cb35a804
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
Bencheng Jing [Fri, 12 Jul 2019 13:17:09 +0000 (21:17 +0800)]
amvecm: fix dnlp_cuvbld_min and dnlp_cuvbld_max not load [1/1]
PD#SWPL-11528
Problem:
dnlp_cuvbld_min and dnlp_cuvbld_max not follow db
Solution:
add refresh in driver
Verify:
TL1
Change-Id: Id3a79c5b834c8e6fd3574c70efdf0982694b306c
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
libo [Wed, 8 May 2019 09:51:51 +0000 (17:51 +0800)]
wifi: pull-down uart_cts_a pin for realtek bt [4/4]
PD#SWPL-7373
Problem:
realtek bt not work
Solution:
pull-down uart_cts_a pin
Verify:
ampere
Change-Id: I14f57d28d081077d89c681e2ecc95a25f706c64c
Signed-off-by: libo <bo.li@amlogic.com>
Ruixuan Li [Tue, 23 Jul 2019 03:06:30 +0000 (11:06 +0800)]
emmc: run hs400 166M busmode on sm1 [1/1]
PD#SWPL-10719
Problem:
right now the sm1 is run hs200 200M
Solution:
modify dts
Verify:
passed on sm1_ac200
Change-Id: I01c36c04293698b36cec116302cb104b22500d99
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
Pengcheng Chen [Fri, 12 Jul 2019 10:45:24 +0000 (18:45 +0800)]
rdma: add rdma multi reg trace function [1/1]
PD#SWPL-11388
Problem:
rdma not support multi reg trace
Solution:
add rdma multi reg trace function
Verify:
verify by g12b w400
Change-Id: I74496e11f85af5f2e9aa99108dfc5842eb98d9fc
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
nengwen.chen [Tue, 7 May 2019 06:41:16 +0000 (14:41 +0800)]
atv_demod: fix the CVBS output level [1/1]
PD#SWPL-11581, PD#TV-5622, PD#TV-8087, PD#TV-8088, PD#TV-8089
Problem:
fix the CVBS output level.
Solution:
1.fix peak level(1Vp-p).
2.fix sync head level(300+/-10%mv).
3.fix white level(700+/-10%mv).
Verify:
Verified by x301.
Change-Id: Ie4bd6ed0bb4d6db4443acae49ef98f1f4398d973
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
shuanglong.wang [Fri, 19 Jul 2019 02:48:07 +0000 (10:48 +0800)]
tsync: tunnel mode do not set first vpts for stream mode [1/2]
PD#SWPL-11210
Problem:
stream mode set vpts in check in pts
Solution:
tunnel mode do not set first vpts for stream mode
Verify:
verify by u212
Change-Id: Ic369b83411051a819eb65ad5d1585e26e0342f3f
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
Ruixuan Li [Tue, 9 Jul 2019 08:51:49 +0000 (16:51 +0800)]
emmc: run hs400 166M busmod on sm1 [1/1]
PD#SWPL-10719
Problem:
hs400 200M not stable on sm1
Solution:
run hs400 166M busmod
Verify:
passed on sm1_ac200
Change-Id: I5e5f4db821e8360fdd3ccd6ce24df83446073cf2
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
yicheng shen [Mon, 15 Jul 2019 06:53:07 +0000 (02:53 -0400)]
hdmitx: update the phy setting for TM2 [2/2]
PD#SWPL-10703
Problem:
HDMITX Eye Diagram of TM2 test fail
Solution:
Optimize the phy setting;
Verify:
TM2
Change-Id: Ib9f948aa85fe189754d7da002727309e7e32ca18
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Jianxin Pan [Mon, 22 Jul 2019 02:45:31 +0000 (19:45 -0700)]
Merge "clk: g12b: fix cpu hangup when reboot [1/1]" into amlogic-4.9-dev
Ruixuan Li [Wed, 12 Jun 2019 08:49:22 +0000 (16:49 +0800)]
emmc: rescan cmd delay windows to set cmd delay [1/1]
PD#SWPL-10095
Problem:
command delay may too close to the command edge
Solution:
rescan cmd delay windows and find cmd delay value
after data alignment
Verify:
passed on g12b
Change-Id: I258e93aa87e35c843c45f62c58af3609bebe0901
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
MingLiang Dong [Wed, 10 Jul 2019 13:29:37 +0000 (09:29 -0400)]
hdr: add hdmi hdr10+ support [1/1]
PD#SWPL-9850
Problem:
new feature, add hdmi hdr10+ support
Solution:
add hdmi hdr10+ support
Verify:
verify on TL1
Change-Id: I189d92d48dcce81ac8c9476d0c6f7b64a461a9e6
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Jian Hu [Sun, 21 Jul 2019 04:57:38 +0000 (12:57 +0800)]
clk: g12b: fix cpu hangup when reboot [1/1]
PD#SWPL-11559
Problem:
it will hangup when reboot
Solution:
fix cpub clock parent name error
Verify:
test passed on g12b
Change-Id: I7c2732420d6040d8cb778c104f71f4397a1bb03a
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
shaochan.liu [Wed, 22 May 2019 07:41:15 +0000 (15:41 +0800)]
sm1: add slt panel config support [1/1]
PD#SWPL-8442
Problem:
need slt panel config(mipi2hdmi 720p) on basic board
Solution:
add slt panel config(mipi2hdmi 720p) on basic board
Verify:
sm1
Change-Id: Ia634216a5f0bc96f9a4838a2f0ec983bef8d0a3b
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
Yong Qin [Mon, 1 Jul 2019 09:19:26 +0000 (17:19 +0800)]
vdin: add hdr10 pluse data in vframe [1/1]
PD#SWPL-9849
Problem:
add hdr10 pkt data into vframe structure
Solution:
according to hdmi rx hdr10p_on flag, copy hdr10p data
from hdmirx to vframe
Verify:
tl1
Change-Id: I4d3bcbcce4d1303a5e5d4cf57a7777e4fd1fd54c
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
changqing.gao [Thu, 18 Jul 2019 06:17:21 +0000 (14:17 +0800)]
dts: sm1: reduce the CMA reserved memory [1/1]
PD#SWPL-11208
Problem:
system would auto reboot because of low free memory(Unmovable type)
Solution:
reduce the CMA reserved memory.
1.reduce ion_cma_reserved from 128MB to 48MB.(DDR size == 1G)
2.remove vdin0_cma_reserved which is not used for sm1.
Verify:
test passed on sm1
Change-Id: Ifdb31bd3451ad984305c5f08ba3b1be478c02cf4
Signed-off-by: changqing.gao <changqing.gao@amlogic.com>
Lei Yang [Fri, 14 Jun 2019 09:32:27 +0000 (17:32 +0800)]
hdmirx: add packet analysis of hdr10plus [1/1]
PD#SWPL-9686
Problem:
hdmirx cannot support HDR10plus
Solution:
add packet analysis of hdr10plus.
Verify:
tm2_ab311.
Change-Id: Ic98c3fa57ce6da3262285febc587fb2cac2be0fa
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
Bencheng Jing [Wed, 17 Jul 2019 08:29:26 +0000 (16:29 +0800)]
mcdi: keep g12a/g12b/sm1 reg_mcdi_qmeen same as gxlx2 [1/2]
PD#SWPL-10411
Problem:
reg_mcdi_qmeen is enable by driver
Solution:
disable reg_mcdi_qmeen
Verify:
u212
Change-Id: I02887fab37a0bbeb43bfa83a4a5a2e446bebb9c1
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Pengcheng Chen [Thu, 18 Jul 2019 12:09:31 +0000 (20:09 +0800)]
vpp: fix afbc scope set when video reverse [1/1]
PD#SWPL-9397
Problem:
afbc scope set error when video reverse and afbc width not aligned
Solution:
fix afbc scope set when video reverse
Verify:
Verify on TL1-x301
Change-Id: I1631c18192f438bfb6e60c3970789a903d0a3d19
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Yong Qin [Thu, 11 Jul 2019 10:51:44 +0000 (18:51 +0800)]
cec: during resume received OTP msg again [1/1]
PD#TV-7837
Problem:
when tv power on by OTP, when during power on, tv received
OTP again, then needn't send power key. and need send a event
to android.
Solution:
when cec driver is power on, needn't send power event to android.
Verify:
tl1
Change-Id: I8807c5cbbcab831577fdc23062a78454c2106167
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Dezhi Kong [Mon, 17 Jun 2019 11:39:59 +0000 (19:39 +0800)]
drm: add sm1 support [1/1]
PD#SWPL-8061
Problem:
SM1 support
Solution:
add sm1 support
Verify:
verify by ac200 with modetest command
Change-Id: Id79f227afa7f7dbcaad09887f8bdbd1f64b93c4a
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
Pengcheng Chen [Wed, 10 Jul 2019 09:25:10 +0000 (17:25 +0800)]
osd: fixed fb mmap failed on android [3/3]
PD#SWPL-6631
Problem:
dolby vision graphic tests need fb_test
Solution:
Alloc buffer when mmap
Verify:
verified on tm2 t96e2
Change-Id: I12896d7ef9ad4a8122e2784c4692ff2d0bc69d1b
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Yong Qin [Mon, 8 Jul 2019 07:42:57 +0000 (15:42 +0800)]
vdin: for support dv ll mode [1/1]
PD#SWPL-2894
Problem:
vdin for support DV LL mode
Solution:
1.add dv 1.5 LL mode support
2.fix vdin mem dump method,only dump active zone
3.add support RGB and 12bit for dv LL mode
4.add vsi info param of dv LL mode
5.dolby vision LL 422 12bit mode,RX need to enable tunnel
Verify:
tl1
Change-Id: I4ddad1310bcc6d2f777bf7099ac26fe2db812b22
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Yong Qin [Fri, 12 Jul 2019 06:12:06 +0000 (14:12 +0800)]
cec: none tv chip set arc cause crash [1/1]
PD#OTT-5149
Problem:
ceca isr cost long time, and delayed vdin vs.
Solution:
move function to tasklet
Verify:
test on txlx customer platform.
Change-Id: Iaae5b682f858787b25527518d2f787c3ee73e1be
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Sandy Luo [Mon, 15 Jul 2019 05:44:39 +0000 (13:44 +0800)]
TL1: dts: change dvfs table [1/1]
PD#SWPL-10848
Problem:
ARM vfp d8 error.
Solution:
Add DFVS voltage
Verify:
TL1 X301
Change-Id: I780daaa5326c99c80e246ce1a1797fb5ed13a518
Signed-off-by: Sandy Luo <sandy.luo@amlogic.com>
Hong Guo [Fri, 12 Jul 2019 09:21:07 +0000 (17:21 +0800)]
supsend: clear wakeup reason after reusme. [1/1]
PD#SWPL-11035
Problem:
clear wakeup reason after reusme.
Solution:
clear wakeup reason after reusme.
Verify:
test pass on t962x2-x301 ,g12b_400
Change-Id: I19360dbf1c7a1cf9460417b00c8af6ebc818beba
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
yao liu [Fri, 12 Jul 2019 09:33:50 +0000 (05:33 -0400)]
osd: add osd blend bypass function for tm2 [2/3]
PD#SWPL-6631
Problem:
dv certification need osd blend bypass
Solution:
add osd blend bypass function
Verify:
verified on tm2 t96e2
Change-Id: I91ba9c622aacc7bc9ad657105fd5e53a3cee595b
Signed-off-by: yao liu <yao.liu@amlogic.com>
yao liu [Fri, 12 Jul 2019 09:27:54 +0000 (05:27 -0400)]
dolby: fix tm2 end-to-end test [1/3]
PD#SWPL-6631
Problem:
5213/5214/5217 480p graphic tests fail
due to g_vpotch is too small
Solution:
incread g_vpotch from 0x20 to 0x60 for resolution below 720p
Verify:
verified on tm2 t96e2
Change-Id: Iedeaaf485c9ffea703d344edd7ed4b5187e78f1f
Signed-off-by: yao liu <yao.liu@amlogic.com>
Jihong Sui [Mon, 15 Jul 2019 05:50:45 +0000 (13:50 +0800)]
deinterlace: increasing protection for unreg [1/2]
PD#SWPL-10149
Problem:
random crash when stress test
Solution:
1. delete recycle keep buff when bypass;
2. adjusting judgment timing about pre_de_buf_config;
Verify:
TL1
Change-Id: I7b0716ce35234d2342cdc13fcf0d51211f579d13
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Jian Hu [Fri, 12 Jul 2019 09:10:45 +0000 (17:10 +0800)]
clk: sm1: fix cpu clock hangup [1/1]
PD#SWPL-10033
Problem:
it will hangup when play video
Solution:
using the origin clk-mux ops to register cpu clock
Verify:
test passed on sm1
Change-Id: I1a21eb28d8af3d68a70c89c37fff857fb416c9a8
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
sky zhou [Fri, 5 Jul 2019 08:37:36 +0000 (16:37 +0800)]
vdin: remove hardcode manual buffer cnt. [1/3]
PD#TV-7344
Problem:
current vdin1 use hardcode buffer cnt 4, it
is not good for user space program.
Solution:
Check passed buffer fd arry, so we can read variable
fd num.
Verify:
verified on macroni
Change-Id: I9bc07e45a3716423dc037a5d966c9b6b5eafcdfe
Signed-off-by: sky zhou <sky.zhou@amlogic.com>
sky zhou [Tue, 16 Jul 2019 10:05:16 +0000 (18:05 +0800)]
osd: osd ext leaked buf when viu2 displaymode is NULL. [1/1]
PD#TV-7713
Problem:
osd buffer leaked dma buffer when switch
display pipe.
Solution:
when viu is NULL, osd need still release correct
display file.
Verify:
verified on macroni
Change-Id: Ib2df6b022b6fd654430eedae08e351ae53701fc1
Signed-off-by: sky zhou <sky.zhou@amlogic.com>
Gongwei Chen [Mon, 15 Jul 2019 07:35:54 +0000 (15:35 +0800)]
dts: gpio keypad in u202 [1/2]
PD#SWPL-11212
Problem:
The physical keys are not working
Solution:
add gpio keypad in u202
Verify:
Verify by Android P u202
Change-Id: I0c97d2ffd7f8712b4584c81b1b9007f45755ec7c
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
Huan Biao [Thu, 11 Jul 2019 03:33:53 +0000 (11:33 +0800)]
dts: thermal: fix gpu pp get fail issue [1/1]
PD#SWPL-11138
Problem:
gpufreq cooling device init get gpu pp fail
Solution:
get gpu pp from gpu dts
Verify:
verified on s905x p212
Change-Id: I0dfa8f6ff2a767432177301b32acdceb0f5e3462
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
Tao Zeng [Mon, 15 Jul 2019 05:53:42 +0000 (13:53 +0800)]
kasan: close vmap if enabled kasan [1/1]
PD#SWPL-10141
Problem:
if opened kasan with vmap, there will be some wrong kasan reports
Solution:
close vmap if open kasan
Verify:
p212
Change-Id: I37cdcb26cfb6fe87529db1ece3b7740ac072ba1a
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Huan Biao [Fri, 12 Jul 2019 09:27:01 +0000 (17:27 +0800)]
thermal: add s912 thermal support [1/2]
PD#SWPL-11152
Problem:
s912 thermal init fail
Solution:
fix thermal dts
fix thermal cpuid get issue
Verify:
verified on s912 q201
Change-Id: Id2802621c5c8d711bfcbc5684252ac0dd519900a
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
zhiwei.yuan [Wed, 10 Jul 2019 08:31:15 +0000 (16:31 +0800)]
vdin: switch to ATV source,snowflake screen showing pink [1/1]
PD#SWPL-11340
Problem:
matrix setting is wrong
Solution:
for snowflake brightness, only need coef0, disable coef1 & 2
Verify:
verified by t962x2_x301
Change-Id: Id248803541fbb68004ea61bd2aa7dfc57408e787
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>