Paul Eggleton [Thu, 22 Aug 2013 15:41:10 +0000 (16:41 +0100)]
gpgme: update to 1.4.3
(From OE-Core rev:
3b4f5c4153c0af0e5205d9c30e4b7265c36079d3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Thu, 22 Aug 2013 14:36:18 +0000 (15:36 +0100)]
runqemu-ifup: when tunctl can't be found, say what package builds it
If runqemu is used without actually building any qemu images (i.e. you
downloaded the images) it's likely that qemu-helper-native hasn't been built.
Instead of just saying what command can't be found, tell the user how to solve
their problem.
(From OE-Core rev:
45f80a0c46035dc73818ce4bd818a4f6197d954f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Xufeng Zhang [Thu, 22 Aug 2013 03:12:28 +0000 (11:12 +0800)]
openssl: avoid NULL pointer dereference in three places
There are three potential NULL pointer dereference in
EVP_DigestInit_ex(), dh_pub_encode() and dsa_pub_encode()
functions.
Fix them by adding proper null pointer check.
[YOCTO #4600]
[ CQID: WIND00373257 ]
(From OE-Core rev:
4779d3c89cf0129763a4f5b7306c1247a0d6d021)
Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jackie Huang [Mon, 19 Aug 2013 09:10:32 +0000 (05:10 -0400)]
openssh: add init.d/sshd status command for LSB compliance
(From OE-Core rev:
d1e518b6942b945be7a4d44bc137a1441af8f837)
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jackie Huang [Mon, 19 Aug 2013 09:25:52 +0000 (05:25 -0400)]
at: add init.d/atd status command for LSB compliance
(From OE-Core rev:
9c19592afac6b38df7038da02bcda26dc28b4e4c)
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jackie Huang [Wed, 21 Aug 2013 05:32:27 +0000 (01:32 -0400)]
sysvinit: add init.d/bootlogd status command for LSB compliance
(From OE-Core rev:
95180b966adb6ebe6451ab0e91187e7db93f22e4)
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jackie Huang [Mon, 19 Aug 2013 08:22:26 +0000 (04:22 -0400)]
dbus: add init.d/dbus-1 status command for LSB compliance
(From OE-Core rev:
9262d3b06eee7e698c990399d2f10b7d68d17211)
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jackie Huang [Wed, 21 Aug 2013 05:28:17 +0000 (01:28 -0400)]
nfs-utils: add init.d/nfsserver status command for LSB compliance
(From OE-Core rev:
d5132337fa08ee74eaebadaeaecb6b4f5b2c5190)
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jackie Huang [Mon, 19 Aug 2013 10:08:56 +0000 (06:08 -0400)]
sysklogd: add init.d/syslog status command for LSB compliance
(From OE-Core rev:
7f0314c095032c231e2408c0276fea56b4e68884)
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Thu, 22 Aug 2013 02:20:42 +0000 (19:20 -0700)]
glib-2.0: Specify libiconv when building on uclibc
We use GNU libiconv seprate package on uclibc
specifying this makes the configure clear of not
trying to detect glibc/iconv and then also finding
libiconv in sysroot and confusing itself with errors like
| gconvert.c:66:2: error: #error GNU libiconv not in use but included iconv.h is from libiconv
| #error GNU libiconv not in use but included iconv.h is from libiconv
| ^
(From OE-Core rev:
38b6c4df7c215ed7fd6be107fbc2527e66791e2e)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 9 Mar 2013 12:47:21 +0000 (12:47 +0000)]
bitbake: data_smart: Add _remove operator
There are long standing complaints about the fact its very difficult
to remove a portion of a variable. The immediate request is for a -=
and =- operator. The trouble is that += and =+ are "immediate"
operators and are applied straight away. Most people would expect
-= and =- to be deferred to have the effect most people desire and
therefore implementing -= and =- would just make the situation more
confusing.
This deferred operation is much more similar to the override syntax
which happens at data store finalisation. The _remove operator is
therefore in keeping with the _append and _prepend operations.
This code is loosely based on a patch from Peter Seebach although it
has been rewritten to be simpler, more efficient and avoid some
potential bugs.
The code currently only works on space delimited variables, which
are by far the most commom type. If bitbake is ehanced to support
types natively in future, we can adjust this code to adapt to that.
(Bitbake rev:
9c91948e10df278dad4832487fa56888cd58d187)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 23 Aug 2013 16:16:50 +0000 (16:16 +0000)]
bitbake: bitbake: Add ui event handlers filtering
Add functionality to allow UIs to update and change the types of events they
recieve. To do this we need to add a new command and also need to be able
to obtain the current event hander ID. In the case of xmlrpc, this is
straightforward, in the case of the process server we need to save the result
in a multiprocessing.Value() so we can retrive it. An excplit command
was added to the server API to facilitate this.
The same function can also be used to mask or unmask specific log messages,
allowing the UI to optionally differ from the standard set of message
filtering.
Based upon work by Cristiana Voicu <cristiana.voicu@intel.com>
(Bitbake rev:
ba5a6c88785d9889d4172ec79937ac2a5555327e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 24 Aug 2013 12:03:10 +0000 (12:03 +0000)]
bitbake: server/xmlrpc/prserv: Add sane timeout to default xmlrpc server
The standard python socket connect has long timouts which make sense for remote
connections but not local things like the PR Service. This adds a timeout
parameter to the common xmlrpc server creation function and sets it to a more
reasonable 5 seconds.
Making the PR server instantly exit is a good way to test the effect of this
on bitbake.
We can remove the bodged timeout in the PRServer terminate function which
has the side effect of affecting global scope.
(Bitbake rev:
8c01cff94787abbb64fbdf0c16cd63f8f97a7e03)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 24 Aug 2013 11:56:31 +0000 (11:56 +0000)]
bitbake: process: Improve exit handling and hangs
It turns out we have a number of different ways the process server termination can
hang. If we call cancel_join_thread() on the event queue, it means that it can be left
containing partial data. This means the reading of the event queue in the terminate()
function can hang, the timeout and block parameters to Queue.get() don't make any
difference.
Equally, if we don't call cancel_join_thread(), the join_thread in terminate()
will hang giving a different deadlock.
The best solution I could find is to loop over the process is_alive() after requesting
it stops, trying to join the thread and if that fails, try and flush the event
queue again.
It wasn't clear what difference a force option should make in this case, we're
gracefully trying to empty queues and shut down regardless of whether its a SIGTERM
so I've simply removed the force option.
(Bitbake rev:
c5c8f33ca4b81877a0115887849881001b745bf0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Fri, 23 Aug 2013 17:06:26 +0000 (19:06 +0200)]
bitbake: parse: Return IOError when including file with absolute path
* resolve_file was behaving different when relative and absolute
paths were passed to it
* include relative-path/non-existent-file.inc
works correctly resolve_file throws IOError, BBHandler.py:handle()
doesn't catch it, ConfHandler.py:include() catches IOError and shows:
DEBUG: CONF file 'relative-path/non-existent-file.inc' not found
* include /absolute-path/non-existent-file.inc
was failing, because resolve_file just returns fn,
BBHandler.py:handle() calls bb.parse.mark_dependency(d, abs_fn)
which throws:
OSError: [Errno 2] No such file or directory: '/absolute-path/non-existent-file.inc'
and parsing fails.
Ad isfile() test for absolute fn and throw IOError to make
resolve_file behavior consistent for both paths.
* I know we had some issues with -b relative-path-to-recipe.bb and
absolute path, so consider this patch only as RFC and documentation of
this problem
* Catch OSError too in ConfHandler.py:include() e.g. in case the file exists, but user
cannot read it or something like that.
(Bitbake rev:
b0bbd89a4f0b98fa1ab28b8e0526cd9ddb76fa57)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Christopher Larson [Fri, 23 Aug 2013 19:26:15 +0000 (12:26 -0700)]
nativesdk-ca-certificates: prepopulate ca-certificates.crt
As postinsts aren't run for nativesdk packages when populating an SDK, we need
to prepopulate up-front.
(From OE-Core rev:
09e768b68b3605e897d422c9c7b3815f3b994d31)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Christopher Larson [Fri, 23 Aug 2013 19:26:14 +0000 (12:26 -0700)]
ca-certificates: add recipe (version
20130610)
We need this for certain nativesdk recipes, as we can't rely on the
certificate path or bundle path being the same across distros, and it's useful
in many cases on the target as well.
This is based on the
20130119 recipe from meta-oe, with the following changes:
- use the debian git repository to avoid vanishing sources
- obey our target paths
- default to a sysroot relative to the script location (make relocatable)
- define SUMMARY
- don't inherit autotools, this isn't an autotools package
- add MPL-2.0 to LICENSE, as that's the license of the certdata
- install the script man page
- use a native rather than cross recipe, as it's not bound in any way to the
target system
- add nativesdk to bbclassextend, for use in SDKs
(From OE-Core rev:
ad2851cf0abc2ab35e0f60c96d3142c29a07c8fc)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Sun, 25 Aug 2013 19:37:44 +0000 (20:37 +0100)]
xserver-nodm-init: improvements from meta-oe
Bring in some changes from the meta-oe version of this script in order
to bring them closer together. (Unfortunately it does not completely
supersede the recipes in meta-oe - there is still some unification to be
done between x11-common and xserver-common.)
* Add systemd support (with extensions for ROOTLESS_X)
* Remove sudo from RDEPENDS_${PN} since this hasn't been used by this
for a long time
* Rearrange recipe slightly to make the order logical
A couple of additional improvements at the same time:
* Use ROOT_HOME for root's home directory
* Set short description in SUMMARY instead of DESCRIPTION
(From OE-Core rev:
d4f82500fb30e9e25b517e65c2bd72b3c2bad070)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 24 Aug 2013 16:01:20 +0000 (17:01 +0100)]
classes: Remove references to _remove in function names since this may become a bitbake keyword
There is a good chance we might want to support a bitbake operator
"_remove" which works in a similar way to _append and _prepend. As
such, we can't use those keywords in function or variable names.
(From OE-Core rev:
491fde8cd3fd493f9fec2fd434fe1be547f66148)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 23 Aug 2013 18:08:20 +0000 (14:08 -0400)]
linux-yocto: introduce v3.10
Introduce the 3.10 kernel. This is based on the 3.10.9 upstream kernel
and replaces the 3.8 recipes, which will be removed once all reference
boards have been updated.
3.10 also the latest LTSI and will be updated with that content when it
becomes available.
Other features of the 3.10 kernel include:
- refreshed -rt support
- refreshed yaffs2, aufs3
- cryptodev
- bfs, edf, and OCF staged features
- scrubbed and updated meta data for v3.10
- improved tools support for meta data updates and queue maintenance
- patch carry forward from all previous linux-yocto kernels and
configuration.
This kernel has been built and boot tested on all qemu machines and architectures.
(From OE-Core rev:
6dc46834c6edaf358c18b26e4304bc9e7413eb60)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 23 Aug 2013 18:08:19 +0000 (14:08 -0400)]
gst-plugins-good: fix 3.10 libc-headers build failure
kernel commit
24b9f5017 [[media] V4L: Remove deprecated image centering controls]
removed the definitions of V4L2_CID_HCENTER and V4L2_CID_VCENTER after three
years of depreciation.
The ioctl values are still free, and the case statement which processess them
in v4l2 userspace falls through to the proper replacement. So in the short
term, we can explicitly define them using the old absolute values, and everything
will work.
(From OE-Core rev:
1e35d04067357b1c65d9e2c4796acfa02274fd9d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 26 Aug 2013 08:20:07 +0000 (08:20 +0000)]
linux-libc-headers: Reinstate scripts-Makefile.headersinst-install-headers-from-sc.patch
The autobuilders and their long paths are still triggering errors during
the headers installation. Reinstate the previous patch for this,
after updating for 3.10.
(From OE-Core rev:
fe4428fd740b3937007e0a3f893714ff04c33533)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Mon, 26 Aug 2013 03:25:15 +0000 (23:25 -0400)]
linux-libc-headers: ptrace.h: remove ptrace_peeksiginfo_args
The addition of ptrace_peeksiginfo_args to the uapi in kernel commit
84c751bd [ptrace: add ability to retrieve signals without removing from a queue (v4)]
means that existing applications using glibc versions that define ptrace_peeksiginfo_args
in sys/ptrace.h will get duplicate structure definitions like:
| In file included from /poky-master/build/tmp/work/i586-poky-linux/strace/4.8-r0/strace-4.8/process.c:66:0:
| /poky-master/build/tmp/sysroots/qemux86/usr/include/linux/ptrace.h:58:8: error: redefinition of 'struct ptrace_peeksiginfo_args'
| struct ptrace_peeksiginfo_args {
| ^
| In file included from /poky-master/build/tmp/work/i586-poky-linux/strace/4.8-r0/strace-4.8/defs.h:159:0,
| from /poky-master/build/tmp/work/i586-poky-linux/strace/4.8-r0/strace-4.8/process.c:37:
| /poky-master/build/tmp/sysroots/qemux86/usr/include/sys/ptrace.h:191:8: note: originally defined here
| struct ptrace_peeksiginfo_args
| ^
| make[2]: *** [process.o] Error 1
Reverting to the previous status of not exporting this structure temporarily
fixes applications, until they can be adjusted to not mix sys/ptrace.h and
linux/ptrace.h includes.
(From OE-Core rev:
7c207e4c3c0e3b575c67a302b97b0dc700a8fc15)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 23 Aug 2013 18:08:18 +0000 (14:08 -0400)]
linux-libc-headers: update to v3.10
Now that the 3.10 kernel has been released we can bump the libc-headers to
that version and remove the 3.8 variant. Userspace compatibility is
maintained through kernel versions, we also make the single 3.10 version the
toolchain default.
(From OE-Core rev:
4e79a46254e778f85c00efd4b0085cbaeb6e0d4d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 23 Aug 2013 18:08:17 +0000 (14:08 -0400)]
guilt: update to latest git version
Uprev guilt to the latest guilt version from its upstream repository.
As part of the uprev all of the previous changes required for the
yocto kernel tools to use git to manipulate series files have been
dropped. These changes were specific to circumventing parts of guilt's
internal santiy checking to allow specific Yocto kernel manipluation
of sub-series files.
Since the kernel tools no longer need guilt, we can use an up to date
and nearly pure upstream version of guilt.
(From OE-Core rev:
595c4469adc36d88ba2403915fc6c1d355014a58)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 23 Aug 2013 18:08:16 +0000 (14:08 -0400)]
kern-tools: usability, bug fixes and no guilt
Updating the kern-tools SRCREV to pick up the following fixes:
60a894e kgit-s2q: add proper commit ID handling for mixed am/apply usage
3b08257 kgit-s2q: delete pruning of path support.
c5868b4 kgit-s2q: Restore implicit exit status to "git apply" section
1bd00b9 kgit-scc: mask warnings from cleanup phase 5
bb75299 kgit-s2q: fix commit warp when running "git am --abort"
ef9571b kgit-scc: cleanup git rebase-apply dir
fdb7d21 kgit-scc: ensure treegen stops if a meta series fails
008987b config: add kconfig cleaning options
69ff569 kgit-s2q: strip blank lines and comments
e7b4540 kgit-init: disable garbage collection on a new tree
417eaed kgit-s2q: delete old LTSI patch dir finding code
21f2200 kgit-scc: better error checking on resume
ad5084c kern-tools: use .meta as meta data container
1deb5d8 kgit-meta: don't push patches without a series file
eb431a1 kgit-s2q: aid patch reject resolution via helper scripts
f859c40 kgit-s2q: only use patch annotations when explicitly asked
333ae18 kgit: speed patch application by batching patches
bf6991d kgit: teach tools about non-default meta dirs
bcfc712 kgit-s2q: usability improvements
cb28803 kgit-s2q: fix patch prefix stripping.
37f40e1 kgit-s2q: warn/exit with error if patch not in series
f4704d2 kgit-s2q: consistent rm usage
e11819c kgit-s2q: standardize on use of git mailinfo
36a5eda kgit: remove guilt dependency
c461a4f spp/scc: export mark commands to meta-series
5311162 updateme: ensure that generated features are only used once
4f7a263 kgit-checkpoint: clear .gitignore for meta branch
21ee6f2 updateme: enforce a matching machine
b08749d kgit-scc: remove -meta files after consruction
These are bug fixes, usability changes as well as the removal of the
guilt dependency. During the uprev of the guilt package, the amount of
circumvention of the typical guilt workflow and checks meant that using
it as a series -> branch manager was no longer appropriate. As a result
a new tools kgit-s2q (series 2 queue) was created based on git-quiltimport,
git am, and the LTSI tree generation scripts.
The result is better series to branch validation, faster application and
a simpler management model. This tool is backwards compatible with any
tree previously constructed with guilt. We are now "guilt free"
(From OE-Core rev:
983bff587b60fdd0244ad00f238df5ed50cc1e1a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 23 Aug 2013 16:28:49 +0000 (17:28 +0100)]
Add memory resident bitbake script
This adds an init script which instead of the standard bitbake, launches
a memory resident bitbake, defaulting to port 12345. It expects a port
number to use as the first option.
Right now this is experimental but I think its probably worth wrapping
up in a form people can more easily experiment with it. There are some
known issues:
a) It throws some debug output due to the lack of a UI which we need
to clean up
b) It should probably be able to auto select a free port
c) You get a nice backtrace if you specify a build directory but
not a port number
I'd also highlight there are security issues here if you don't trust
users who can connect into localhost. We might need to look at named
pipes or something similar for something limited to the current user.
(From OE-Core rev:
52c7f8bba86a43b89f24a23d545c99d75b67555f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 23 Aug 2013 16:41:53 +0000 (16:41 +0000)]
bitbake: prserv/serv: Fix pid file removal
Mark Hatle spotted there were pid files being left around. This patch
fixes things so the removal function is called correctly, the code
contained a typo.
(Bitbake rev:
c696a16c8200c31c52750037eeafe07e065b6517)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 23 Aug 2013 14:55:21 +0000 (15:55 +0100)]
bitbake: event/msg: Add primitive server side UI log record filtering
Currently one of the bigger bottlenecks in bitbake is passing all the
log messages over IPC to the UI. This is worthwhile if the UI is going
to use them, pointless otherwise. The memory resident bitbake suffers
from this performance issue particularly badly.
This patch filters the log events on the server side with the global
log levels and hence reduces the traffic. This speeds up parsing
(18.5s down to 17s) and bitbake general command overhead is reduced
(7.3s for a NOP to 6.2s).
What isn't added here is general event filtering or the ability to
change the log levels once set. Provision is made for adding this
in a follow up patch though.
(Bitbake rev:
1bf0e88f57ba0bca62532e81d0d62cf88e2abcbb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nicolas Dechesne [Fri, 16 Aug 2013 09:20:59 +0000 (11:20 +0200)]
bitbake: build.py: create symlink for run.do_xxx scripts
The 'courtesy' symlink for log.do_xxx are quite useful when debugging, so
with this commit, we now get similar 'courtesy' symlink for run.do_xxx
scripts.
We only create symlink for tasks, not individual functions.
The symlink is create right before the actual runfile is created, indeed
we cannot create the symlink right after running the task since a failure
or execption can happen, in which case the symlink wouldn't be created,
and symlink are particularely useful when the task failed!
Another option would be create the symlink after the runfile is created,
and before the script is executed, but that means we need to duplicate the
code in case of Shell vs Python task.
(Bitbake rev:
a672b39c5d529ba85d72eee8fef4c4273eaa5397)
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 23 Aug 2013 09:02:21 +0000 (10:02 +0100)]
sstate: Fix the relative symlink replacement code
ant reported on irc that the sstate absolute to relative symlink creation
code wasn't working in klibc. He was correct although the level of breakage is
rather surprising since it only worked for one level of symlink (usr/include) with
everything else being broken.
The reason is probably that nothing really uses absolute paths, we use relative
paths where at all possible already. Nothing in the target sysroot should use
absolute paths for a start. In this regard, the klibc-dev package is broken and
needs fixing. It will currently break when building for one machine, then switching
to another of the same TUNE_PKGARCH and installing from sstate but that is a
separate issue.
This patch fixes the symlink creation code by firstly passing in the correct
value we need (where the symlink will end up) and seccondly, actually using it.
I've also tweaked the debug message to contain appropriate information and got
right of the double "//" value the existing code created in favour of the form
'./..' which looks neater.
(From OE-Core rev:
9b05c65450526522d7358d0c0901b594de546748)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristian Iorga [Fri, 23 Aug 2013 13:42:16 +0000 (16:42 +0300)]
xdg-utils: add runtime dependency on xprop
xprop is called by xdg-utils scripts.
(From OE-Core rev:
58d05c817cf3be071c66c7e4dbbb9942fd7a0752)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristian Iorga [Fri, 23 Aug 2013 13:42:17 +0000 (16:42 +0300)]
packagegroup-self-hosted: pcmanfm and xdg-utils integration
PCManFm file manager is integrated in Build Appliance;
xdg-utils is also integrated for file
association support.
(From OE-Core rev:
a031523eb072df8f04dbae296a44ad51268acdf4)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristian Iorga [Fri, 23 Aug 2013 13:42:19 +0000 (16:42 +0300)]
recipes-graphics/builder: fix wrong user name
Fix wrong inclusion of local username.
The right "builder" user is now used in
builder_hob_start shell script.
(From OE-Core rev:
0b0d48a4b8af310d1f6eabf2c4d459cda1c2b4bb)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristian Iorga [Fri, 23 Aug 2013 13:42:18 +0000 (16:42 +0300)]
packagegroup-self-hosted: Add the sato icon theme
Hicolor icon theme does not properly displays icons for
folders in Build Appliance.
Sato icon theme is working correctly.
Also, settings-daemon needs to be added to image in order to
properly display folder icons.
(From OE-Core rev:
a5188962c4ce6312fd625c2ab9601c24765255ed)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andrei Gherzan [Fri, 23 Aug 2013 14:20:57 +0000 (17:20 +0300)]
eglibc-options.inc: Fix string options
Add quotation marks for OPTION_EGLIBC_NSSWITCH_FIXED* options. If not, Kconfig
will ignore the value and will use the default one which is "".
(From OE-Core rev:
53f48a7aadc807a75c34fe72de7497790ba19ee5)
Signed-off-by: Andrei Gherzan <andrei.gherzan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andrei Gherzan [Fri, 23 Aug 2013 14:20:58 +0000 (17:20 +0300)]
eglibc.inc: Remove quotation marks from OPTION_EGLIBC_NSSWITCH_FIXED_*
Kconfig outputs strings with quotation marks. When eglibc tries to see if
the paths exists, uses wildcard make function which doesn't strip out the
quotation marks - checking for path fails. So strip out the quotation
marks from OPTION_EGLIBC_NSSWITCH_FIXED_* option-groups.config.
(see nss/Makefile)
(From OE-Core rev:
eacf0f3ed15eccb52eb6b98e20b75f0aa26b6e81)
Signed-off-by: Andrei Gherzan <andrei.gherzan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristian Iorga [Wed, 21 Aug 2013 13:02:03 +0000 (13:02 +0000)]
default-providers: Set the preferred provider for bluez
There is a need for a default provider for bluez
now that bluez5 recipe is also present.
After the introduction of bluez5 recipe,
the following warnings are displayed:
"NOTE: multiple providers are available for runtime libasound-module-bluez (bluez4, bluez5)
NOTE: consider defining a PREFERRED_PROVIDER entry to match libasound-module-bluez"
Upon debug, bitbake shows:
DEBUG: checking PREFERRED_PROVIDER_bluez4 (value None) against ['bluez4', 'bluez5']
DEBUG: checking PREFERRED_PROVIDER_bluez4-4.101 (value None) against ['bluez4', 'bluez5']
DEBUG: checking PREFERRED_PROVIDER_bluez4-4.101-r5 (value None) against ['bluez4', 'bluez5']
DEBUG: checking PREFERRED_PROVIDER_bluez5 (value None) against ['bluez4', 'bluez5']
DEBUG: checking PREFERRED_PROVIDER_bluez5-5.7 (value None) against ['bluez4', 'bluez5']
DEBUG: checking PREFERRED_PROVIDER_bluez5-5.7-r0 (value None) against ['bluez4', 'bluez5']
Bitbake is faced with the question "what should provide libasound-module-bluez?"
which is a runtime name. It needs to try and find a PREFERRED_PROVIDER entry
which matches this but those use *build time* naming. So it converts "libasound-module-bluez"
into the canonical ${PN} of bluez4 and bluez5 and then tries to look those up.
What it actually should do is go one step further of mapping bluez4/bluez5
into the virtual/bluez but that does not happen.
Bug opened on this issue: YB5044
https://bugzilla.yoctoproject.org/show_bug.cgi?id=5044
[YOCTO #5030]
(From OE-Core rev:
6f07d066074b1e01ff3c16408812e6b6d5e531ac)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 22 Aug 2013 13:22:52 +0000 (13:22 +0000)]
gcc-4.8: Add two patches to deal with cross-canadian build failures
See the patch headers for more information about the cross-canadian build failures
these patches avoid.
(From OE-Core rev:
2bae60b8a3cb7783c06e35a2962e56110e876957)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 22 Aug 2013 11:07:22 +0000 (11:07 +0000)]
chrpath: Add support for relocating darwin binaries
On darwin, install_name_tool can be used to relocate binaries/libraries. This
adds support for adjusting them with relative paths rather than hardcoded ones.
The Linux code is factored out into a function but is otherwise unchanged.
(From OE-Core rev:
ed5ace3437eb0f751172e6b93399639c94b89e59)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 22 Aug 2013 10:40:53 +0000 (10:40 +0000)]
Drop darwin8/darwin9 usage
There were darwin8/darwin9 overrides spinkled in the code from times gone
by. Lets settle on the darwin override and remove the others since its pointless
duplication. We always inject darwin into OVERRIDES if needed in the darwin8/9
cases.
(From OE-Core rev:
8d5e6eed7802a6056f9eaa50a85e3eee00fe2742)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 22 Aug 2013 10:24:57 +0000 (10:24 +0000)]
bitbake.conf: Work around dev symlink problems on darwin
On darwin, we have:
libxxx.dylib -> libxxx.Y.dylib
compared to Linux which has:
libxxx.so -> libxxx.so.Y
Our ordering of PACKAGES with -dev first and then ${PN} makes it impossible to
match the files correctly using simple globbing. This makes darwin targets
completely broken since both the libs and the dev symlinks end up in ${PN}-dev.
Whilst this commit is a hack, it at least puts the files into ${PN} and allows the
builds to be used. Symlinks don't take up much space so this isn't the end of
the world. I'm open to better solutions to this.
(From OE-Core rev:
51c3dbe2df45096bbd7866adabb08e114952ff13)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 22 Aug 2013 10:05:45 +0000 (10:05 +0000)]
gcc-common.inc: Drop unused LIBGCCS_VAR variable
(From OE-Core rev:
b1449f6e5be13a8c58bf38302236091d046f0215)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 22 Aug 2013 10:04:03 +0000 (10:04 +0000)]
gcc-cross.inc: Clean up after merge
* Remove the duplicate EXTRA_OECONF_PATHS that is overwritten
* Merge the do_compile and do_compile_prepend
* Group dependency and configuration variables together
(From OE-Core rev:
430b1d6fcbf60df35036fe5bbf8e55f7fb8f5341)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 22 Aug 2013 09:52:53 +0000 (09:52 +0000)]
gcc-cross-canadian: Fold configure-sdk and package-sdk into the main .inc
This also has the advantage of removing the confusing sdk naming which
has been purged everywhere else in favour of cross-canadian.
(From OE-Core rev:
cbb63ca9e7e6d397198808e862f812f1012c74a7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 22 Aug 2013 09:50:09 +0000 (09:50 +0000)]
gcc-*-runtime.inc: Fold configuration into gcc-runtime.inc
(From OE-Core rev:
9cdfd55de8dbdea3d5e5ed25fbc67d1f198a069a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 22 Aug 2013 09:48:20 +0000 (09:48 +0000)]
gcc-*-cross.inc: Fold common configuration into gcc-cross.inc
(From OE-Core rev:
8f6df85ca90c038316ca1ed22e9c54f937f21406)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 22 Aug 2013 09:43:59 +0000 (09:43 +0000)]
gcc-target: Combine gcc-target-configure.inc, gcc-target-package.inc and other common code
(From OE-Core rev:
86bbe5b7b8e8f0c6ee88888fa083053ae14765c4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 22 Aug 2013 09:37:41 +0000 (09:37 +0000)]
libgcc: Move common code to libgcc.inc
(From OE-Core rev:
3b627b0a8e91a08a3e2a44c71d312ae303fb5d62)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 22 Aug 2013 09:36:03 +0000 (09:36 +0000)]
gcc-runtime: Fold common configuration into gcc-configure-runtime.inc
(From OE-Core rev:
17ba68f9ae09ae20eb11dfb03bcaa99428b74bf6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 22 Aug 2013 09:33:11 +0000 (09:33 +0000)]
gcc-cross-initial: Fold common configuration into gcc-cross-initial.inc
(From OE-Core rev:
7a9202d0478f0021b0ecd03b8d4af8d56c8e3265)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 22 Aug 2013 09:31:56 +0000 (09:31 +0000)]
gcc-cross: Fold common configuration into gcc-cross.inc
(From OE-Core rev:
a77a8011e56f7cddf22adc63270aa9f44c86062a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 22 Aug 2013 09:12:04 +0000 (09:12 +0000)]
bitbake.conf/classes/gcc: Don't hardcode -nativesdk
Hardcoding -nativesdk as the sdk package architecture is inflexible. We may have
multiple different target OS and we need a way to be able to separate them. Turning
this into a configurable value allows the flexibility we need to build different
SDKMACHINEs with different OS targets.
The commit should have no behaviour change, just makes things more configurable.
(From OE-Core rev:
a2110e86b98d646e136de9ec6b8e668079b0d4f4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 21 Aug 2013 12:24:31 +0000 (12:24 +0000)]
Revert "nativesdk: inherit relocatable"
This reverts commit
f93ddea31fcf18833c9bc6e93d93ad223c62eded.
We never run nativesdk binaries so it doesn't make sense to use the relocatable
class. The chrpath calls at packaging time will ensure the binaries are relocated
in the final packages. The binaries in the sysroot are never used.
(From OE-Core rev:
9f19d1b90c4fa04439b6267bda0484fd0b350373)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 20 Aug 2013 22:29:25 +0000 (22:29 +0000)]
gcc-cross-canadian: Merge 4.7 and 4.8 recipes into common include
This removes duplication and follows the pattern of the other gcc recipes.
(From OE-Core rev:
3296c896f5a5ef7dd50ab4e00ddbf1c2476462dc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 20 Aug 2013 22:24:22 +0000 (22:24 +0000)]
gcc-cross-canadian-4.8: Add missing dependency on nativesdk-zlib
(From OE-Core rev:
c782bd4de511b6e603a72a00124a77be52e50dce)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 20 Aug 2013 22:23:15 +0000 (22:23 +0000)]
gcc-cross-canadian-4.8: Allow elfutils to be a configurable dependency
Some SDK platforms have elfutils support, some do not, therefore allow
this to be configured.
(From OE-Core rev:
717e940d2c2beccfda31dda16a2d0d6d9a495042)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 20 Aug 2013 21:22:31 +0000 (21:22 +0000)]
gcc: Drop gcc-cross4.inc, its pointless now
The include was useful historically, its not anymore so lets remove it.
This should have no functional change except on any layers directly depending
on it or gcc-cross.inc but even then it would only impact sh4 and is easily
fixed if there was a problem.
(From OE-Core rev:
e7e8fe11c34bf05179f3bbaa2fb1af7b7125696a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 20 Aug 2013 21:17:55 +0000 (21:17 +0000)]
gcc-configure-sdk.inc: Don't build target-libgcc
I don't understand why we're building the target libgcc in the canadian-cross build
since it should have been built elsewhere. The compiler configuration isn't correct
to build a working target libgcc in all cases anyway.
To avoid various weird build errors, stop building it.
(From OE-Core rev:
b0d1ab6242b6ce2bcdd0e4e3e61600344fcd2907)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 20 Aug 2013 21:14:02 +0000 (21:14 +0000)]
gcc-package-sdk.inc: Allow executable extension to be overridden
On platforms like windows, executables have extensions. Whilst I'm not proposing
we wholesale support windows extensions, this small tweak allows a cross compiler
targetting mingw to be built which does seem like a good use case.
The patch therefore adds an EXEEXT which the mingw layer can set for the libexec
symlinks.
(From OE-Core rev:
8dcf0d95b654fa6cc56193168aaa744052ad8ffc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 20 Aug 2013 21:10:55 +0000 (21:10 +0000)]
gcc-package-sdk.inc: Use relative symlinks in libexec dir
We already use relative links for other gcc libexec links, this changes the sdk
do_install to match elsewhere and use relative symlinks too. This makes things
slightly easier in the SDK installation process and standardises.
(From OE-Core rev:
ecfa1141e731224cc5a099f8dfd22878f23359ec)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 20 Aug 2013 21:02:30 +0000 (21:02 +0000)]
gcc-cross-canadian-4.8: Enable PARALLEL_MAKE
This disabling of PARALLEL_MAKE has been forward ported for gcc-cross-canadian
since at least 2009-09 and gcc 4.3.3, probably older.
I've tested this with high values of parallel make and it all seems to work and
we usually build gcc with parallel make so it seems unlikely there are issues.
Lets therefore enable it.
(From OE-Core rev:
cee90d230899eb1255d586e6ee4fad0d94348cfd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 20 Aug 2013 17:19:29 +0000 (17:19 +0000)]
libiconv: Extend to nativesdk and support non-linux targets
This library is currently only available when targeting non-libc. This patch
also makes it available when targetting non-linux since it is likely of use
then.
It also adds a BBCLASSEXTEND for nativesdk since again, it can be useful
in that context.
(From OE-Core rev:
af8c5adc71dc9bab57504d5a9dbf9e863fd4bf7b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 20 Aug 2013 17:13:14 +0000 (17:13 +0000)]
gettext: Improve USE_NLS handling for nativesdk/crosssdk/cross-canadian
The gettext handling of USE_NLS has become a bit tricky to understand, or
alter from the SDK context. This patch introduces a SDKUSE_NLS which can
be set to configure a given SDK/ADT to use NLS or not. This is independent
of the target system NLS usage.
The code in gettext.bbclass is therefore simplified and the classes
themselves now set USE_NLS to appropriate values. No NLS is used
for native, cross and crosssdk since it is never used there and
would just increase build time.
(From OE-Core rev:
fe634d47449899f7424adb77ff5bc7ddf8a07a47)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 20 Aug 2013 13:06:27 +0000 (13:06 +0000)]
populate_sdk_base: Allow sdk tar options to be overridden
It can be useful to override or append options to the SDK tarball creation command
so add a variable to allow this.
(From OE-Core rev:
ae86a46c1b255e7c2833eb6d48ed46eba440e95a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 20 Aug 2013 13:04:49 +0000 (13:04 +0000)]
crosssdk: Construct target_exec_prefix from prefix_nativesdk
${exec_prefix_nativesdk} doesn't exist so use prefix_nativesdk instead.
This resolves issues for code which attepts to use target_exec_prefix.
(From OE-Core rev:
cd1ac8257ed2701cbe3802870183e8e1cd3b0418)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 20 Aug 2013 13:01:49 +0000 (13:01 +0000)]
package.bbclass: Fix handling of symlinks in debug packages
When copying the sources for the debug source package we use cpio -Ll
which means to copy files as hardlinks and to dereference symlinks.
It appears there is a bug in cpio since -Ll will copy symlinks and
not dereference them. We therefore do a second pass over copied symlinks
resolving them into files. Ideally we would copy these as hardlinks as well
however it doesn't seem worth the extra code and effort for what amounts
to a corner case for a minor space improvement.
This means that the -dbg packages no longer contain broken symlinks.
[YOCTO #5020]
(From OE-Core rev:
2ca2c4747f645a0d478c2171fff4c65752188285)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 22 Aug 2013 15:49:08 +0000 (15:49 +0000)]
mkfontscale: This no longer needs a full libx11, xproto suffices
configure just looks for xproto so we can drop the libx11 dependency and
reduce the amount we build for some small performance improvements and
less of the -native stack.
(From OE-Core rev:
e473e60d5572f36829068f6d3db9ce9ba9633d71)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Wed, 21 Aug 2013 22:41:52 +0000 (15:41 -0700)]
gnupg: Update to 2.0.21
(From OE-Core rev:
d7481ee36f6bd0416eb35d8c40cb3ed9f2395a2f)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Wed, 21 Aug 2013 21:38:00 +0000 (14:38 -0700)]
valgrind: Backport patch for eglibc 2.18
(From OE-Core rev:
7005f1cd52d64a96a252becd5b1ee7bb5c79ca1a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Wed, 21 Aug 2013 18:30:04 +0000 (11:30 -0700)]
libsdl: Backport xData32 patch for x11 update
(From OE-Core rev:
afe343211c3f5d98717e7952e4d332d70a3b992a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kai Kang [Wed, 21 Aug 2013 08:09:45 +0000 (16:09 +0800)]
libx11-diet: upgrade to 1.6.1
Deleted keysymdef_include patch as it's been merged upstream
(From OE-Core rev:
02c78a1cc849c931f802693e654a72dac71ffb85)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
[sgw - Removed PR and tweaked commit message]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kai Kang [Wed, 21 Aug 2013 07:26:50 +0000 (15:26 +0800)]
libx11: upgrade to 1.6.1
Upgrade libx11 to version 1.6.1.
Update:
* Remove PR and INC_PR.
* File Xcms.txt position changes.
* Drop backport patch keysymdef_include.patch.
* Update disable_tests.patch.
[YOCTO #4973]
(From OE-Core rev:
9e2d9608464c189ec460930570557c48d78108bb)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
[sgw - Removed PR and INC_PR]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Wed, 21 Aug 2013 05:45:23 +0000 (22:45 -0700)]
eglibc: Update SRC_URI and fix unpackaged empty dir
eglibc 2.18 has now been branched out so point to new
tarballs
(From OE-Core rev:
e0c2dd275827a4b37b8116d0f0119333638461af)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Marko Lindqvist [Wed, 21 Aug 2013 13:08:32 +0000 (16:08 +0300)]
boost: fix build when PARALLEL_MAKE is not set
It was passing "None" to bjam, which then parsed it as unknown build target.
(From OE-Core rev:
0a323abab1961caa334035f4f263f1787b3d7cc7)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Marko Lindqvist [Thu, 15 Aug 2013 02:18:07 +0000 (05:18 +0300)]
libsdl2: add recipe
(From OE-Core rev:
41e0d3ed02017ad9d652275b7083b5b85cf49acc)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kai Kang [Tue, 20 Aug 2013 02:20:08 +0000 (10:20 +0800)]
bc: add patch to fix segmentation fault
When run 'bc -l', it segmentation faults. Apply patch from BLFS to fix it.
Ref:
http://www.mail-archive.com/blfs-support@linuxfromscratch.org/msg04601.html
(From OE-Core rev:
ae3158e0cfbfa1f1027976bff34ad502eeb28583)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yevhen Kyriukha [Tue, 13 Aug 2013 11:26:46 +0000 (14:26 +0300)]
connman: fix systemd support for connman-* packages.
This patch fixes systemd's postinst/postrm script generation.
(From OE-Core rev:
657c7724966fdbd1236cb003419f01c885bcd570)
Signed-off-by: Yevhen Kyriukha <kirgene@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Lauren Post [Mon, 19 Aug 2013 19:17:44 +0000 (14:17 -0500)]
directfb: add fusion patch for hangs
The following tests hang on exit: direct_test, fusion_skirmish
(From OE-Core rev:
46b8009d668478c5ed3e8b64c65f1de2a4dc25b3)
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Lauren Post [Mon, 19 Aug 2013 19:17:43 +0000 (14:17 -0500)]
directfb: Upgrade to 1.6.3
Remove mesa patch as 1.6.3 provides compatibility with mesa
(From OE-Core rev:
00c078ff442676acf5f4653fe8c5ebf29de811a4)
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jonathan Liu [Tue, 20 Aug 2013 10:10:41 +0000 (20:10 +1000)]
mesa: enable additional drivers for gallium-llvm x86/x86-64
The additional Gallium drivers are needed for open source ATI Radeon
and NVIDIA graphics drivers.
The radeonsi and r600 drivers require LLVM 3.3 built with r600
PACKAGECONFIG so they must be explicitly enabled by adding r600 to the
mesa PACKAGECONFIG.
(From OE-Core rev:
1d08cef09cc7cbf682e8b372987fe4456961272b)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristian Iorga [Tue, 20 Aug 2013 18:05:29 +0000 (21:05 +0300)]
builder: register directories with pcmanfm
Register directories to be opened with PCManFM
filemanager using xdg-open in Build Appliance.
(From OE-Core rev:
06d1e6db91497ad86803f9a5ed2346cd23cfa744)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jonathan Liu [Tue, 20 Aug 2013 12:21:18 +0000 (22:21 +1000)]
xf86-video-vesa: remove duplicate xf86driproto from DEPENDS
(From OE-Core rev:
34ada56cf08012ae59977a991025b18099d02fb3)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jonathan Liu [Tue, 20 Aug 2013 12:21:03 +0000 (22:21 +1000)]
xf86-video-intel: remove duplicate xf86driproto from DEPENDS
(From OE-Core rev:
f2d3df7ccd8798ce40d95c9900039016c1276ce7)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Tue, 20 Aug 2013 10:46:35 +0000 (11:46 +0100)]
gst-plugins-good: fix orc enabling via PACKAGECONFIG
An extra --disable-orc was being added to EXTRA_OECONF regardless of
whether orc was in PACKAGECONFIG, drop this.
(From OE-Core rev:
0fbb6b6a2bae4d5df21dc9606e7befeb6ad24429)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Marko Lindqvist [Tue, 20 Aug 2013 08:39:38 +0000 (11:39 +0300)]
texinfo: correct dont-depend-on-help2man.patch
Patch needed only with automake-1.13 no longer worked as expected
after texinfo has been updated to version 5.1.
(From OE-Core rev:
abda8c052e2c4098c828671c9dd46993c1e81de2)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Roy.Li [Tue, 20 Aug 2013 07:02:49 +0000 (15:02 +0800)]
shadow: backport a patch to make newgrp work
Backport a Debian patch to fix the reading of the
gshadow file in order to make newgrp work correctly.
(From OE-Core rev:
3ef8db6217f7c40a9eb063d21ce6f25b16d88d53)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
[sgw - tweaked commit message]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Thu, 1 Aug 2013 22:13:57 +0000 (19:13 -0300)]
distro_features_check.bbclass: Allow checking of required/conflicting features
This add support to list required/confliting distro features for a
recipe; this avoids user mistake when building recipes/images which
would not work depending on DISTRO_FEATURES option set.
Adding:
,----[ Use example ]
| inherit distro_features_check
|
| REQUIRED_DISTRO_FEATURES = "x11"
| CONFLICT_DISTRO_FEATURES_mx6 = "wayland"
`----
In the image recipe allow us to make clear to user that this image
needs X11 and /cannot/ be build with Wayland support in i.MX6
platforms, for example.
(From OE-Core rev:
a7519be6a23869ebafbf712370dab86ab92f68a5)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Wed, 14 Aug 2013 01:31:23 +0000 (20:31 -0500)]
package_ipk: Add support for PACKAGE_EXCLUDE
This uses the new --add-exclude arguments in opkg-cl, to list the excluded
packages.
If an excluded package is needed for the install to resolve,
an error will be generated. Recommended packages will not
generate an error.
(From OE-Core rev:
6d7f5581bbfaf174edb77d92846e720e8057481c)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Wed, 14 Aug 2013 01:31:23 +0000 (20:31 -0500)]
opkg: Add support for excluding packages from the install
This adds a new argument to opkg-cl, --add-exclude, which is
used to add package names to the list of packages to exclude
from the install.
If an excluded package is needed for the install to resolve,
an error will be generated. Recommended packages will not
generate an error.
(From OE-Core rev:
63c61b7c0c8aeb89661e3bb85e281dd1ef5b618c)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Tue, 13 Aug 2013 20:02:01 +0000 (15:02 -0500)]
package_ipk: Add support for NO_RECOMMENDATIONS
Uses the opkg --no-install-recommends option.
(From OE-Core rev:
e36c9947c82be034133a27db6e0f7a769daeb185)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Tue, 13 Aug 2013 20:02:01 +0000 (15:02 -0500)]
opkg: Add --no-install-recommends option.
The new --no-install-recommends option is similar to the behavior of
apt-get's --no-install-recommedns. Only required packages will be
installed.
(From OE-Core rev:
86a30a88cf89ed97c372c391169f4ae243c89fd2)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Tue, 13 Aug 2013 00:47:11 +0000 (19:47 -0500)]
package_deb: Add support for NO_RECOMMENDATIONS and PACKAGE_EXCLUDE
Add support for NO_RECOMMENDATIONS and PACKAGE_EXCLUDE. Also add a
warning that ensures users know that BAD_RECOMMENDATIONS support is
not implemented in the debian package/rootfs classes.
(From OE-Core rev:
42b115b6d65c8205acb77b96db481f3e5172266b)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Tue, 13 Aug 2013 15:50:55 +0000 (10:50 -0500)]
package_deb.bbclass: Use the WORKDIR not SYSROOT for temp files
Previous debian APT configuration was using the sysroot directory.
This not only polluted the sysroot, but violates the expectation that
the sysroot is not modified by the rootfs installation.
(From OE-Core rev:
2db14eaa0fcc080bc20fa9da985ffc05c3b21e2a)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Tue, 13 Aug 2013 00:45:48 +0000 (19:45 -0500)]
package_rpm.bbclass: NO_RECOMMENDATIONS support
Add NO_RECOMMENDATIONS support. A way to disable all recommended
packages from being installed. This will help shrink the size of
the resulting filesystem.
Add documentation on NO_RECOMMENDATIONS and BAD_RECOMMENDATIONS.
Note, using NO_RECOMMENDATIONS has side effects such that kernel-modules may
not have been installed. A user will need to manually add to their image
any kernel-modules required to be on the image for functionality.
(From OE-Core rev:
0341bfa886ea851f5a394051545b4e624d8003dd)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Tue, 13 Aug 2013 00:45:48 +0000 (19:45 -0500)]
python-smartpm: Add support to disable installing recommends
In order to attempt to reduce image sizes by skipping recommended packages,
a new mode was added to smart that only evaluates required packaged.
(From OE-Core rev:
6fd8141bbdcd84c591149d84ad84effc2357de72)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Wed, 7 Aug 2013 16:53:37 +0000 (11:53 -0500)]
package_rpm.bbclass: Add support for PACKAGE_EXCLUDE to RPM installs
Using the new smart exclude mechanism an error will be generated in the
excluded package is required for the image to be generated.
(From OE-Core rev:
238c46c03d0d9c35523c78b94bfebb57904bac5a)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Wed, 7 Aug 2013 16:53:37 +0000 (11:53 -0500)]
python-smartpm: Add support for excluding package from the install
Update smart to support a mechanism for excluding specific packages from the
install process. An error will be generated if this package is required.
(From OE-Core rev:
87660d636c2ebe76cd9dff2a334f135def9a0cf3)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Tue, 6 Aug 2013 15:41:33 +0000 (10:41 -0500)]
image.bbclass: Add basic support for PACKAGE_EXCLUDE
Add the foundation for the PACKAGE_EXCLUDE support.
As part of this work, it was noticed that the PACKAGE_INSTALL and
PACKAGE_INSTALL_ATTEMPTONLY were still using he 'normal' version for
dependencies. This should no longer be necessary as of the change in the way
the complementary package groups (dev, dbg, ptest and others) are defined.
By making this change the dependency tree is more correct than before, and
gives the ability for manipulating PACKAGE_INSTALL and
PACKAGE_INSTALL_ATTEMPTONLY, while adjusting the dependencies at the same
time.
Warning messages will be generated if the user is trying to exclude a
package that was previously in the PACKAGE_INSTALL or
PACKAGE_INSTALL_ATTEMPTONLY variables.
(See additional commits for package manager specific support.)
Add documentation on PACKAGE_EXCLUDE and related variables.
(From OE-Core rev:
208d4d5ef7c5ead35dc27b7808f92ed377377aa4)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Florin Sarbu [Thu, 22 Aug 2013 09:56:46 +0000 (12:56 +0300)]
busybox.inc: Avoid error when SYSLOG is not enabled
Add -f to rm of ${D}${sysconfdir}/syslog-startup.conf.${BPN} so as to
not error out when the busybox config used does not have SYSLOG enabled
and DISTRO_FEATURES does not contain sysvinit.
(From OE-Core rev:
4c5756149754d0b18b14595db335f8f5e14cc0a3)
Signed-off-by: Florin Sarbu <florin.sarbu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>