Harald Hoyer [Wed, 29 May 2013 12:45:59 +0000 (14:45 +0200)]
kernel-modules/module-setup.sh: add nvme kernel module
apparently not caught by the block driver regexp
https://bugzilla.redhat.com/show_bug.cgi?id=910734
Harald Hoyer [Wed, 29 May 2013 12:38:52 +0000 (14:38 +0200)]
ifcfg/write-ifcfg.sh:
- fix ONBOOT for slaves
- set TYPE=Bond for bonding
https://bugzilla.redhat.com/show_bug.cgi?id=919001
Harald Hoyer [Wed, 29 May 2013 12:28:25 +0000 (14:28 +0200)]
udev-rules/module-setup.sh: optionally install /etc/pcmcia/config.opts
https://bugzilla.redhat.com/show_bug.cgi?id=920076
Harald Hoyer [Wed, 29 May 2013 11:31:54 +0000 (13:31 +0200)]
crypt-loop/module-setup.sh: install loop kernel module
Harald Hoyer [Wed, 29 May 2013 11:20:00 +0000 (13:20 +0200)]
i18n/module-setup.sh: install default font latarcyrheb-sun16
Harald Hoyer [Wed, 29 May 2013 09:33:25 +0000 (11:33 +0200)]
dracut-emergency.service: do not start for "action_on_fail=continue"
Dennis Schridde [Fri, 17 May 2013 11:54:57 +0000 (13:54 +0200)]
[40network] Provide a hostname fallback function, in case there is no executable of this name
Harald Hoyer [Tue, 28 May 2013 14:56:40 +0000 (16:56 +0200)]
ifcfg/write-ifcfg.sh: proper NAME the interfaces
https://bugzilla.redhat.com/show_bug.cgi?id=965842
Harald Hoyer [Tue, 28 May 2013 14:34:34 +0000 (16:34 +0200)]
btrfs: include btrfs-zero-log in the initramfs
https://bugzilla.redhat.com/show_bug.cgi?id=963257
Harald Hoyer [Tue, 28 May 2013 14:15:24 +0000 (16:15 +0200)]
url-lib/url-lib.sh: turn off curl globbing
https://bugzilla.redhat.com/show_bug.cgi?id=907497
Harald Hoyer [Tue, 28 May 2013 13:40:45 +0000 (15:40 +0200)]
dracut.spec: put selinux for kdump crash file contexts
Kamil Rytarowski [Sat, 11 May 2013 12:54:38 +0000 (14:54 +0200)]
Fix memory leak
Kamil Rytarowski [Sat, 11 May 2013 12:40:19 +0000 (14:40 +0200)]
Always check the return number of asprintf
asprintf prints to an allocated string. When successful, the
functions return the number of bytes printed. If memory allocation
wasn't possible, or some other error occurs, the function will return
-1.
Don't check strp as a result of asprintf, it's content may be undefined.
man 3 asprintf
Kamil Rytarowski [Sat, 11 May 2013 11:49:00 +0000 (13:49 +0200)]
Use consistiently termination code macros
Operate in install_all and install_one consequently on EXIT_SUCCESS
and EXIT_FAILURE termination code macros as they are meant to be
returned from these functions.
Kamil Rytarowski [Sat, 11 May 2013 15:06:45 +0000 (17:06 +0200)]
Introduce stricter type correctness
Kamil Rytarowski [Sat, 11 May 2013 09:39:46 +0000 (11:39 +0200)]
Fix parsing command line arguments
Adjust correctly the *optstring argument of getopt_long. Add support
for a missing option -v|--verbose and drop unknown options -D, -I and -L.
Baoquan He [Thu, 9 May 2013 08:38:53 +0000 (16:38 +0800)]
01fips/module-setup.sh: add libssl.so.10 to make kdump work with fips mode
FIPS can work well in 1st kernel, but failed in kdump kernel. the
libssl.so.10 and related hmac file are needed. Now add it and it
works.
Signed-off-by: Baoquan He <bhe@redhat.com>
Harald Hoyer [Tue, 28 May 2013 12:25:49 +0000 (14:25 +0200)]
dracut-functions.sh: clarify instmods() error message
Harald Hoyer [Tue, 28 May 2013 11:26:05 +0000 (13:26 +0200)]
don't add volatile swap partitions to host_devs
Harald Hoyer [Tue, 28 May 2013 10:50:57 +0000 (12:50 +0200)]
systemd: set environment vars DRACUT_SYSTEMD, NEWROOT in service file
Adam Williamson [Wed, 22 May 2013 20:56:58 +0000 (13:56 -0700)]
don't specify "p" as a separator for dmraid arrays (RHBZ #966162)
As per RHBZ #966162, parted stopped unconditionally using "p" as a
separator for dmraid device names in version 3.1, so other things need
to fall in line with that convention now.
Harald Hoyer [Mon, 6 May 2013 12:06:29 +0000 (14:06 +0200)]
dracut.sh: degrade message about missing tools for stripping
warning -> info
https://bugzilla.redhat.com/show_bug.cgi?id=958519
Colin Guthrie [Fri, 3 May 2013 16:16:05 +0000 (17:16 +0100)]
usrmount: Fix miss-detection of btrfs subvolumes.
This causes the root FS options to be incorrectly applied to to /usr
In some cases this can cause boot failure e.g. due to and XFS /usr
not supporting the 'acl' option from the ext4 root FS.
https://bugs.mageia.org/show_bug.cgi?id=9884
Harald Hoyer [Tue, 30 Apr 2013 16:55:12 +0000 (18:55 +0200)]
zfcp: match udev rule against KERNEL=="zfcp"
zfcp_cfdc will go away in the future
tt
Harald Hoyer [Tue, 30 Apr 2013 16:54:33 +0000 (18:54 +0200)]
test: use grep option "-F" and install /etc/os-release
WANG Chao [Fri, 26 Apr 2013 07:16:19 +0000 (15:16 +0800)]
_emergency_shell: Show current working directory correctly in shell.
When dropped to emergency shell, for example, use rd.break=pre-pivot,
the PS1 won't correctly show current directory we're in:
pre-pivot:/# cd /sysroot/
pre-pivot:/#
(still shows "/")
Let's take a look at PS1 variable:
(I'm adding prefix/suffix 'x' to make it clear):
pre-pivot:/# echo x${PS1}x
xpre-pivot:/# x
(PS1 isn't dynamic)
Regarding the current dracut code, it should be:
pre-pivot:/# cd /sysroot/etc
pre-pivot:/sysroot/etc#
With this patch:
pre-pivot:/# echo x${PS1}x
xpre-pivot:${PWD}# x
(Now PS1 is dynamic, it will show the directory correctly)
I tested for both normal boot and kdump boot.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Harald Hoyer [Mon, 29 Apr 2013 09:35:23 +0000 (11:35 +0200)]
dracut-install: make use of _cleanup_* macros
Harald Hoyer [Mon, 29 Apr 2013 09:34:26 +0000 (11:34 +0200)]
fips: do not fail immediatly after loading the crypto modules
Fail only if tcrypt insmod failed.
Harald Hoyer [Thu, 25 Apr 2013 19:16:03 +0000 (21:16 +0200)]
dracut.sh: do not preunlink for fips mode
just install prelink and the cache files
Harald Hoyer [Thu, 25 Apr 2013 17:44:01 +0000 (19:44 +0200)]
fixed fips mode
- preserve timestamps
- copy /lib*/hmaccalc files
- run sha512hmac after kernel module loading
- add more fips kernel modules
Harald Hoyer [Fri, 19 Apr 2013 13:08:16 +0000 (15:08 +0200)]
fixup
3be5d63c2f
either test or []
Harald Hoyer [Fri, 19 Apr 2013 13:00:20 +0000 (15:00 +0200)]
shutdown: redirect output to /dev/console only if it exists
Harald Hoyer [Thu, 18 Apr 2013 10:54:55 +0000 (12:54 +0200)]
dracut-install: error out, if ldd reports no execution permission
This turns off lazy resolving on noexec mounted tmp directories.
https://bugzilla.redhat.com/show_bug.cgi?id=953426
Harald Hoyer [Thu, 18 Apr 2013 10:54:30 +0000 (12:54 +0200)]
base/dracut-lib.sh: do not setdebug, if not in initramfs
Harald Hoyer [Tue, 16 Apr 2013 11:41:19 +0000 (13:41 +0200)]
Makefile: remove dracut-version.sh on clean
Harald Hoyer [Tue, 16 Apr 2013 11:38:16 +0000 (13:38 +0200)]
.gitignore: ignore more files
Harald Hoyer [Tue, 16 Apr 2013 11:33:40 +0000 (13:33 +0200)]
lsinitrd.sh: do not output filename for a single file
Harald Hoyer [Tue, 16 Apr 2013 10:44:25 +0000 (12:44 +0200)]
lsinitrd: drop use of "file"
Harald Hoyer [Tue, 16 Apr 2013 09:18:18 +0000 (11:18 +0200)]
dracut-bash-completion.sh: file filename completion
Harald Hoyer [Tue, 16 Apr 2013 08:43:39 +0000 (10:43 +0200)]
lsinitrd: add bash completion
Harald Hoyer [Tue, 16 Apr 2013 08:44:56 +0000 (10:44 +0200)]
lsinitrd: switch to getopt and add "-f" and "-k" parameter
Harald Hoyer [Mon, 15 Apr 2013 09:53:03 +0000 (11:53 +0200)]
Makefile: fixup tarball Makefile
Harald Hoyer [Mon, 15 Apr 2013 09:39:32 +0000 (11:39 +0200)]
dmsquash-live: add support for "iso-scan/filename" kernel parameter
now you can write grub entries like
set isofile="/Fedora-live.iso"
loopback loop $isofile
linux loop)/isolinux/vmlinuz iso-scan/filename=$isofile root=live:CDLABEL=Fedora-...
initrd (loop)/isolinux/initrd0.img
Harald Hoyer [Thu, 11 Apr 2013 09:29:00 +0000 (11:29 +0200)]
url-lib/module-setup.sh: install ca-bundle.crt by libcurl.so
https://bugzilla.redhat.com/show_bug.cgi?id=950770
curl seems to look for /etc/pki/tls/certs/ca-bundle.crt
extract the correct path by disecting libcurl.so
Harald Hoyer [Thu, 11 Apr 2013 11:10:24 +0000 (13:10 +0200)]
systemd: include the systemd-random-seed-load.service
The systemd cryptsetup-generator wants systemd-random-seed-load.service
in case /dev/urandom is the device.
Harald Hoyer [Thu, 11 Apr 2013 08:11:14 +0000 (10:11 +0200)]
Makefile,git2spec.pl: use "git describe"
Harald Hoyer [Thu, 11 Apr 2013 08:10:49 +0000 (10:10 +0200)]
AUTHORS: update
Harald Hoyer [Fri, 12 Apr 2013 13:25:44 +0000 (15:25 +0200)]
plymouth/plymouth-pretrigger.sh: fixup of
ca2c6936
Harald Hoyer [Thu, 11 Apr 2013 14:08:26 +0000 (16:08 +0200)]
Do not call plymouth with full path
Harald Hoyer [Wed, 10 Apr 2013 08:15:43 +0000 (10:15 +0200)]
crypt/module-setup.sh: also handle UUID= while filtering crypttab
The crypttab filter for host-only did not handle UUID= entries.
https://bugzilla.redhat.com/show_bug.cgi?id=919752
WANG Chao [Tue, 9 Apr 2013 10:56:40 +0000 (18:56 +0800)]
ifup.sh: Add support for bridge over a vlan tagged interface
This patch add support for bridge a vlan tagged interface, like
br0 -> bond0.7 -> bond0 -> eth0
Signed-off-by: WANG Chao <chaowang@redhat.com>
Baoquan He [Fri, 29 Mar 2013 10:36:16 +0000 (18:36 +0800)]
Let user specify the action after fail
Currently the default action is emergency_shell when failure happened
during system boot. In kdump, this default may not be expected. E.g,
if dump target is not rootfs, it does not matter if mount root failed.
Adding an action which allow dracut always go ahead though failure
happens is needed by kdump.
So here add a function action_on_fail() and cmdline parameter
action_on_fail=<shell | continue>. Use action_to_fail() to replace
emergency_shell which was called after failure. By $(getarg action_on_fail=),
decide to drop into shell, or to leave away the failure and go ahead.
v3->v4:
add handling of selinux policy loaded failure, and change code format to
be consitent
Signed-off-by: Baoquan He <bhe@redhat.com>
[Edited by harald@redhat.com]
Baoquan He [Mon, 8 Apr 2013 09:47:50 +0000 (17:47 +0800)]
Wait for logical interface to be up
If bootdev is logical interface like bond, bridge or vlan, we need
wait them up.
Signed-off-by: Baoquan He <bhe@redhat.com>
Harald Hoyer [Mon, 8 Apr 2013 09:47:49 +0000 (17:47 +0800)]
network: support multiple bonding interfaces
Currently dracut only support 1 bond, namyly bond0 by default. However multiple
bonds configuration may be needed. For example in kdump, in 1st kernel, more
than one bonds may be configured, and bondX other than bond0 is used as output
interface to remote host which will store dump core. This patch can solve this
problem, to write real bond information to initramfs, 2nd kdump kernel will
use it to create the relevant bondX interface.
Tested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
WANG Chao [Mon, 1 Apr 2013 12:34:40 +0000 (20:34 +0800)]
ifup.sh: Add support for bridge over team and vlan tagged team
Team is the same network stack as bonding. Therefore give ifup the ability to
handle bridge over team and vlan tagged team as bonding too.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Harald Hoyer [Tue, 9 Apr 2013 08:48:26 +0000 (10:48 +0200)]
crypt/module-setup.sh: filter /etc/crypttab in host-only mode
only take those /etc/crypttab entries, which we need to boot the system
Harald Hoyer [Tue, 9 Apr 2013 08:47:39 +0000 (10:47 +0200)]
dracut-functions.sh: make use of findmnt
Harald Hoyer [Fri, 5 Apr 2013 14:34:36 +0000 (16:34 +0200)]
nfs/module-setup.sh: combine egreps for /etc/passwd and /etc/group
Harald Hoyer [Fri, 5 Apr 2013 09:52:33 +0000 (11:52 +0200)]
TEST-99-RPM: ignore rescue images
Harald Hoyer [Fri, 5 Apr 2013 09:07:55 +0000 (11:07 +0200)]
TESTSUITE: s/i6300esbwdt/i6300esb ib700wdt/g
Harald Hoyer [Fri, 5 Apr 2013 09:05:39 +0000 (11:05 +0200)]
TEST-50-MULTINIC: fixup test suite
qemu of the day doesn't like multicast anymore
Harald Hoyer [Fri, 5 Apr 2013 07:01:48 +0000 (09:01 +0200)]
Add missing options to manpage and --help output
https://bugzilla.redhat.com/show_bug.cgi?id=948510
Harald Hoyer [Thu, 4 Apr 2013 10:56:42 +0000 (12:56 +0200)]
base/dracut-lib.sh:wait_for_dev()/cancel_wait_for_dev() set systemd timeouts
Set systemd unit timeouts for the devices we wait for. The systemd
default is 90 seconds, which is way too low for complicated setups.
Harald Hoyer [Thu, 4 Apr 2013 10:54:59 +0000 (12:54 +0200)]
crypt/parse-crypt.sh: create udev rule for systemd
Start the systemd-cryptsetup@luks-*.service for the detected crypto_LUKS
device in the initqueue, so we block in the initqueue and wait for the
password entry.
Harald Hoyer [Thu, 4 Apr 2013 10:51:33 +0000 (12:51 +0200)]
base/dracut-lib.sh: add dev_unit_name()
add helper function to convert device path to systemd unit names
Harald Hoyer [Tue, 2 Apr 2013 11:29:24 +0000 (13:29 +0200)]
base/init.sh: fix version output
Harald Hoyer [Tue, 26 Mar 2013 16:04:43 +0000 (17:04 +0100)]
dracut.spec: Require systemd >= 199
Harald Hoyer [Tue, 26 Mar 2013 15:55:03 +0000 (16:55 +0100)]
version 027
Harald Hoyer [Tue, 26 Mar 2013 15:54:34 +0000 (16:54 +0100)]
dracut.spec: don't BuildRequire bash-completion for rhel
Harald Hoyer [Tue, 26 Mar 2013 15:19:27 +0000 (16:19 +0100)]
systemd: add new timers.target and paths.target
Harald Hoyer [Tue, 26 Mar 2013 15:19:00 +0000 (16:19 +0100)]
use systemd*dir variables everywhere
Harald Hoyer [Tue, 26 Mar 2013 15:17:24 +0000 (16:17 +0100)]
test: change qemu param -nographic to -display none for -daemonize
qemu does not like -nographic in combination with -daemonize
Harald Hoyer [Tue, 26 Mar 2013 14:38:50 +0000 (15:38 +0100)]
x-initrd-rootfs.mount -> x-initrd.mount
Harald Hoyer [Fri, 22 Mar 2013 08:09:57 +0000 (09:09 +0100)]
multipath: install native systemd service
Harald Hoyer [Fri, 22 Mar 2013 08:21:06 +0000 (09:21 +0100)]
systemd: add dracut.bootup(7) reference to service man pages
Harald Hoyer [Fri, 22 Mar 2013 08:13:14 +0000 (09:13 +0100)]
install dracut-*.service units
Harald Hoyer [Fri, 22 Mar 2013 08:09:10 +0000 (09:09 +0100)]
dracut.sh: export systemdsystemconfdir
Harald Hoyer [Wed, 20 Mar 2013 09:25:23 +0000 (10:25 +0100)]
dracut.sh: turn off hostonly mode, if udev database is not found
Harald Hoyer [Wed, 20 Mar 2013 09:22:41 +0000 (10:22 +0100)]
dracut.sh: turn off host-only mode, if essential system filesystems not mounted
Harald Hoyer [Wed, 20 Mar 2013 06:16:43 +0000 (07:16 +0100)]
dracut.spec: use configure
Harald Hoyer [Wed, 20 Mar 2013 06:15:04 +0000 (07:15 +0100)]
dracut.spec: use pkg-config for bashcompletiondir
Harald Hoyer [Wed, 20 Mar 2013 06:07:55 +0000 (07:07 +0100)]
dracut.sh: remove temporary cpio output in trap
Harald Hoyer [Wed, 20 Mar 2013 05:41:25 +0000 (06:41 +0100)]
51-dracut-rescue-postinst.sh,51-dracut-rescue.install: use systemd-machine-id-setup
if /etc/machine-id is empty, use systemd-machine-id-setup
Harald Hoyer [Wed, 20 Mar 2013 05:39:13 +0000 (06:39 +0100)]
51-dracut-rescue-postinst.sh: Rename image and grub entry
grub2-mkconfig ordered the rescue entries higher than the normal ones.
https://bugzilla.redhat.com/show_bug.cgi?id=923439
Harald Hoyer [Tue, 19 Mar 2013 15:56:56 +0000 (16:56 +0100)]
51-dracut-rescue-postinst.sh: add extra checks
Harald Hoyer [Tue, 19 Mar 2013 13:53:17 +0000 (14:53 +0100)]
TEST-40-NBD/test.sh: kill_server() after test_run()
Harald Hoyer [Tue, 19 Mar 2013 13:52:25 +0000 (14:52 +0100)]
network/netroot.sh: do not unset root
Harald Hoyer [Tue, 19 Mar 2013 11:24:13 +0000 (12:24 +0100)]
nbd/nbdroot.sh: fix root != blockdev case
Harald Hoyer [Tue, 19 Mar 2013 11:23:20 +0000 (12:23 +0100)]
fs-lib/fs-lib.sh:write_fs_tab() start initrd-root-fs.target
Harald Hoyer [Tue, 19 Mar 2013 11:22:58 +0000 (12:22 +0100)]
add dracut.bootup.7 man page
Harald Hoyer [Tue, 19 Mar 2013 11:22:33 +0000 (12:22 +0100)]
systemd: add more ordering
Harald Hoyer [Mon, 18 Mar 2013 13:17:19 +0000 (14:17 +0100)]
drm/module-setup.sh: redirect grep to /dev/null
on some architectures, no pci devices exist
Harald Hoyer [Mon, 18 Mar 2013 09:58:25 +0000 (10:58 +0100)]
Makefile: use -D_FILE_OFFSET_BITS=64 to build dracut-install
Harald Hoyer [Mon, 18 Mar 2013 08:29:08 +0000 (09:29 +0100)]
kernel-modules/module-setup.sh: don't fail hard on a missing module
Harald Hoyer [Mon, 18 Mar 2013 07:43:23 +0000 (08:43 +0100)]
kernel-modules/module-setup.sh: install all host filesystem drivers
https://bugzilla.redhat.com/show_bug.cgi?id=922565
Harald Hoyer [Sat, 16 Mar 2013 09:34:20 +0000 (10:34 +0100)]
sosreport: mkdir /run/initramfs, if it does not exist yet
Harald Hoyer [Sat, 16 Mar 2013 09:31:37 +0000 (10:31 +0100)]
dmsquash-live: force load squashfs kernel module
https://bugzilla.redhat.com/show_bug.cgi?id=922248
Harald Hoyer [Fri, 15 Mar 2013 15:54:38 +0000 (16:54 +0100)]
dracut.conf.5.asc: remove duplicated install_items
Harald Hoyer [Fri, 15 Mar 2013 13:41:11 +0000 (14:41 +0100)]
TEST-16-DMSQUASH: use current releasever
Harald Hoyer [Fri, 15 Mar 2013 09:42:18 +0000 (10:42 +0100)]
dracut-bash-completion.sh: add --kver kernel version completion