x86/xen: Return from panic notifier

[ Upstream commit c6875f3aacf2a5a913205accddabf0bfb75cac76 ]

Currently execution of panic() continues until Xen's panic notifier
(xen_panic_event()) is called at which point we make a hypercall that
never returns.

This means that any notifier that is supposed to be called later as
well as significant part of panic() code (such as pstore writes from
kmsg_dump()) is never executed.

There is no reason for xen_panic_event() to be this last point in
execution since panic()'s emergency_restart() will call into
xen_emergency_restart() from where we can perform our hypercall.

Nevertheless, we will provide xen_legacy_crash boot option that will
preserve original behavior during crash. This option could be used,
for example, if running kernel dumper (which happens after panic
notifiers) is undesirable.

Reported-by: James Dingwall <james@dingwall.me.uk>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: include: Mark __cmpxchg as __always_inline

[ Upstream commit 88356d09904bc606182c625575237269aeece22e ]

Commit ac7c3e4ff401 ("compiler: enable CONFIG_OPTIMIZE_INLINING
forcibly") allows compiler to uninline functions marked as 'inline'.
In cace of cmpxchg this would cause to reference function
__cmpxchg_called_with_bad_pointer, which is a error case
for catching bugs and will not happen for correct code, if
__cmpxchg is inlined.

Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
[paul.burton@mips.com: s/__cmpxchd/__cmpxchg in subject]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/x86: Do not clean dummy variable in kexec path

[ Upstream commit 2ecb7402cfc7f22764e7bbc80790e66eadb20560 ]

kexec reboot fails randomly in UEFI based KVM guest.  The firmware
just resets while calling efi_delete_dummy_variable();  Unfortunately
I don't know how to debug the firmware, it is also possible a potential
problem on real hardware as well although nobody reproduced it.

The intention of the efi_delete_dummy_variable is to trigger garbage collection
when entering virtual mode.  But SetVirtualAddressMap can only run once
for each physical reboot, thus kexec_enter_virtual_mode() is not necessarily
a good place to clean a dummy object.

Drop the efi_delete_dummy_variable so that kexec reboot can work.

Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Matthew Garrett <mjg59@google.com>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Octavian Purdila <octavian.purdila@intel.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Talbert <swt@techie.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Link: https://lkml.kernel.org/r/20191002165904.8819-8-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/cper: Fix endianness of PCIe class code

[ Upstream commit 6fb9367a15d1a126d222d738b2702c7958594a5f ]

The CPER parser assumes that the class code is big endian, but at least
on this edk2-derived Intel Purley platform it's little endian:

    efi: EFI v2.50 by EDK II BIOS ID:PLYDCRB1.86B.0119.R05.1701181843
    DMI: Intel Corporation PURLEY/PURLEY, BIOS PLYDCRB1.86B.0119.R05.1701181843 01/18/2017

    {1}[Hardware Error]:   device_id: 0000:5d:00.0
    {1}[Hardware Error]:   slot: 0
    {1}[Hardware Error]:   secondary_bus: 0x5e
    {1}[Hardware Error]:   vendor_id: 0x8086, device_id: 0x2030
    {1}[Hardware Error]:   class_code: 000406
                                       ^^^^^^ (should be 060400)

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Dave Young <dyoung@redhat.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Matthew Garrett <mjg59@google.com>
Cc: Octavian Purdila <octavian.purdila@intel.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Talbert <swt@techie.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Link: https://lkml.kernel.org/r/20191002165904.8819-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: mctrl_gpio: Check for NULL pointer

[ Upstream commit 37e3ab00e4734acc15d96b2926aab55c894f4d9c ]

When using mctrl_gpio_to_gpiod, it dereferences gpios into a single
requested GPIO.  This dereferencing can break if gpios is NULL,
so this patch adds a NULL check before dereferencing it.  If
gpios is NULL, this function will also return NULL.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Link: https://lore.kernel.org/r/20191006163314.23191-1-aford173@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: cifs: mute -Wunused-const-variable message

[ Upstream commit dd19c106a36690b47bb1acc68372f2b472b495b8 ]

After 'Initial git repository build' commit,
'mapping_table_ERRHRD' variable has not been used.

So 'mapping_table_ERRHRD' const variable could be removed
to mute below warning message:

   fs/cifs/netmisc.c:120:40: warning: unused variable 'mapping_table_ERRHRD' [-Wunused-const-variable]
   static const struct smb_to_posix_error mapping_table_ERRHRD[] = {
                                           ^
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: max77620: Use correct unit for debounce times

[ Upstream commit fffa6af94894126994a7600c6f6f09b892e89fa9 ]

The gpiod_set_debounce() function takes the debounce time in
microseconds. Adjust the switch/case values in the MAX77620 GPIO to use
the correct unit.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20191002122825.3948322-1-thierry.reding@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: n_hdlc: fix build on SPARC

[ Upstream commit 47a7e5e97d4edd7b14974d34f0e5a5560fad2915 ]

Fix tty driver build on SPARC by not using __exitdata.
It appears that SPARC does not support section .exit.data.

Fixes these build errors:

`.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o
`.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o
`.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o
`.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o

Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 063246641d4a ("format-security: move static strings to const")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/675e7bd9-955b-3ff3-1101-a973b58b5b75@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: owl: Fix the link time qualifier of 'owl_uart_exit()'

[ Upstream commit 6264dab6efd6069f0387efb078a9960b5642377b ]

'exit' functions should be marked as __exit, not __init.

Fixes: fc60a8b675bd ("tty: serial: owl: Implement console driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20190910041129.6978-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: ftrace: Ensure synchronisation in PLT setup for Neoverse-N1 #1542419

[ Upstream commit dd8a1f13488438c6c220b7cafa500baaf21a6e53 ]

CPUs affected by Neoverse-N1 #1542419 may execute a stale instruction if
it was recently modified. The affected sequence requires freshly written
instructions to be executable before a branch to them is updated.

There are very few places in the kernel that modify executable text,
all but one come with sufficient synchronisation:
 * The module loader's flush_module_icache() calls flush_icache_range(),
   which does a kick_all_cpus_sync()
 * bpf_int_jit_compile() calls flush_icache_range().
 * Kprobes calls aarch64_insn_patch_text(), which does its work in
   stop_machine().
 * static keys and ftrace both patch between nops and branches to
   existing kernel code (not generated code).

The affected sequence is the interaction between ftrace and modules.
The module PLT is cleaned using __flush_icache_range() as the trampoline
shouldn't be executable until we update the branch to it.

Drop the double-underscore so that this path runs kick_all_cpus_sync()
too.

Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfs: Fix nfsi->nrequests count error on nfs_inode_remove_request

[ Upstream commit 33ea5aaa87cdae0f9af4d6b7ee4f650a1a36fd1d ]

When xfstests testing, there are some WARNING as below:

WARNING: CPU: 0 PID: 6235 at fs/nfs/inode.c:122 nfs_clear_inode+0x9c/0xd8
Modules linked in:
CPU: 0 PID: 6235 Comm: umount.nfs
Hardware name: linux,dummy-virt (DT)
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : nfs_clear_inode+0x9c/0xd8
lr : nfs_evict_inode+0x60/0x78
sp : fffffc000f68fc00
x29: fffffc000f68fc00 x28: fffffe00c53155c0
x27: fffffe00c5315000 x26: fffffc0009a63748
x25: fffffc000f68fd18 x24: fffffc000bfaaf40
x23: fffffc000936d3c0 x22: fffffe00c4ff5e20
x21: fffffc000bfaaf40 x20: fffffe00c4ff5d10
x19: fffffc000c056000 x18: 000000000000003c
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000040 x14: 0000000000000228
x13: fffffc000c3a2000 x12: 0000000000000045
x11: 0000000000000000 x10: 0000000000000000
x9 : 0000000000000000 x8 : 0000000000000000
x7 : 0000000000000000 x6 : fffffc00084b027c
x5 : fffffc0009a64000 x4 : fffffe00c0e77400
x3 : fffffc000c0563a8 x2 : fffffffffffffffb
x1 : 000000000000764e x0 : 0000000000000001
Call trace:
 nfs_clear_inode+0x9c/0xd8
 nfs_evict_inode+0x60/0x78
 evict+0x108/0x380
 dispose_list+0x70/0xa0
 evict_inodes+0x194/0x210
 generic_shutdown_super+0xb0/0x220
 nfs_kill_super+0x40/0x88
 deactivate_locked_super+0xb4/0x120
 deactivate_super+0x144/0x160
 cleanup_mnt+0x98/0x148
 __cleanup_mnt+0x38/0x50
 task_work_run+0x114/0x160
 do_notify_resume+0x2f8/0x308
 work_pending+0x8/0x14

The nrequest should be increased/decreased only if PG_INODE_REF flag
was setted.

But in the nfs_inode_remove_request function, it maybe decrease when
no PG_INODE_REF flag, this maybe lead nrequests count error.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: hyperv: Use in-place iterator API in the channel callback

[ Upstream commit 6a297c90efa68b2864483193b8bfb0d19478600c ]

Simplify the ring buffer handling with the in-place API.

Also avoid the dynamic allocation and the memory leak in the channel
callback function.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/iwcm: Fix a lock inversion issue

[ Upstream commit b66f31efbdad95ec274345721d99d1d835e6de01 ]

This patch fixes the lock inversion complaint:

============================================
WARNING: possible recursive locking detected
5.3.0-rc7-dbg+ #1 Not tainted
--------------------------------------------
kworker/u16:6/171 is trying to acquire lock:
00000000035c6e6c (&id_priv->handler_mutex){+.+.}, at: rdma_destroy_id+0x78/0x4a0 [rdma_cm]

but task is already holding lock:
00000000bc7c307d (&id_priv->handler_mutex){+.+.}, at: iw_conn_req_handler+0x151/0x680 [rdma_cm]

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&id_priv->handler_mutex);
  lock(&id_priv->handler_mutex);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

3 locks held by kworker/u16:6/171:
 #0: 00000000e2eaa773 ((wq_completion)iw_cm_wq){+.+.}, at: process_one_work+0x472/0xac0
 #1: 000000001efd357b ((work_completion)(&work->work)#3){+.+.}, at: process_one_work+0x476/0xac0
 #2: 00000000bc7c307d (&id_priv->handler_mutex){+.+.}, at: iw_conn_req_handler+0x151/0x680 [rdma_cm]

stack backtrace:
CPU: 3 PID: 171 Comm: kworker/u16:6 Not tainted 5.3.0-rc7-dbg+ #1
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: iw_cm_wq cm_work_handler [iw_cm]
Call Trace:
 dump_stack+0x8a/0xd6
 __lock_acquire.cold+0xe1/0x24d
 lock_acquire+0x106/0x240
 __mutex_lock+0x12e/0xcb0
 mutex_lock_nested+0x1f/0x30
 rdma_destroy_id+0x78/0x4a0 [rdma_cm]
 iw_conn_req_handler+0x5c9/0x680 [rdma_cm]
 cm_work_handler+0xe62/0x1100 [iw_cm]
 process_one_work+0x56d/0xac0
 worker_thread+0x7a/0x5d0
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

This is not a bug as there are actually two lock classes here.

Link: https://lore.kernel.org/r/20190930231707.48259-3-bvanassche@acm.org
Fixes: de910bd92137 ("RDMA/cma: Simplify locking needed for serialization of callbacks")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hfi1: Prevent memory leak in sdma_init

[ Upstream commit 34b3be18a04ecdc610aae4c48e5d1b799d8689f6 ]

In sdma_init if rhashtable_init fails the allocated memory for
tmp_sdma_rht should be released.

Fixes: 5a52a7acf7e2 ("IB/hfi1: NULL pointer dereference when freeing rhashtable")
Link: https://lore.kernel.org/r/20190925144543.10141-1-navid.emamdoost@gmail.com
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8188eu: fix null dereference when kzalloc fails

[ Upstream commit 955c1532a34305f2f780b47f0c40cc7c65500810 ]

If kzalloc() returns NULL, the error path doesn't stop the flow of
control from entering rtw_hal_read_chip_version() which dereferences the
null pointer. Fix this by adding a 'goto' to the error path to more
gracefully handle the issue and avoid proceeding with initialization
steps that we're no longer prepared to handle.

Also update the debug message to be more consistent with the other debug
messages in this function.

Addresses-Coverity: ("Dereference after null check")

Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com>
Link: https://lore.kernel.org/r/20190927214415.899-1-connor.kuehl@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf annotate: Return appropriate error code for allocation failures

[ Upstream commit 16ed3c1e91159e28b02f11f71ff4ce4cbc6f99e4 ]

We should return errno or the annotation extra range understood by
symbol__strerror_disassemble() instead of -1, fix it, returning ENOMEM
instead.

Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-8of1cmj3rz0mppfcshc9bbqq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf annotate: Propagate the symbol__annotate() error return

[ Upstream commit 211f493b611eef012841f795166c38ec7528738d ]

We were just returning -1 in symbol__annotate() when symbol__annotate()
failed, propagate its error as it is used later to pass to
symbol__strerror_disassemble() to present a error message to the user,
that in some cases were getting:

  "Invalid -1 error code"

Fix it to propagate the error.

Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-0tj89rs9g7nbcyd5skadlvuu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf annotate: Fix the signedness of failure returns

[ Upstream commit 28f4417c3333940b242af03d90214f713bbef232 ]

Callers of symbol__annotate() expect a errno value or some other
extended error value range in symbol__strerror_disassemble() to
convert to a proper error string, fix it when propagating a failure to
find the arch specific annotation routines via arch__find(arch_name).

Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-o0k6dw7cas0vvmjjvgsyvu1i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf annotate: Propagate perf_env__arch() error

[ Upstream commit a66fa0619a0ae3585ef09e9c33ecfb5c7c6cb72b ]

The callers of symbol__annotate2() use symbol__strerror_disassemble() to
convert its failure returns into a human readable string, so
propagate error values from functions it calls, starting with
perf_env__arch() that when fails the right thing to do is to look at
'errno' to see why its possible call to uname() failed.

Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-it5d83kyusfhb1q1b0l4pxzs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tools: Propagate get_cpuid() error

[ Upstream commit f67001a4a08eb124197ed4376941e1da9cf94b42 ]

For consistency, propagate the exact cause for get_cpuid() to have
failed.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-9ig269f7ktnhh99g4l15vpu2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf jevents: Fix period for Intel fixed counters

[ Upstream commit 6bdfd9f118bd59cf0f85d3bf4b72b586adea17c1 ]

The Intel fixed counters use a special table to override the JSON
information.

During this override the period information from the JSON file got
dropped, which results in inst_retired.any and similar running with
frequency mode instead of a period.

Just specify the expected period in the table.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20190927233546.11533-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf script brstackinsn: Fix recovery from LBR/binary mismatch

[ Upstream commit e98df280bc2a499fd41d7f9e2d6733884de69902 ]

When the LBR data and the instructions in a binary do not match the loop
printing instructions could get confused and print a long stream of
bogus <bad> instructions.

The problem was that if the instruction decoder cannot decode an
instruction it ilen wasn't initialized, so the loop going through the
basic block would continue with the previous value.

Harden the code to avoid such problems:

- Make sure ilen is always freshly initialized and is 0 for bad
  instructions.

- Do not overrun the code buffer while printing instructions

- Print a warning message if the final jump is not on an instruction
  boundary.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20190927233546.11533-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf map: Fix overlapped map handling

[ Upstream commit ee212d6ea20887c0ef352be8563ca13dbf965906 ]

Whenever an mmap/mmap2 event occurs, the map tree must be updated to add a new
entry. If a new map overlaps a previous map, the overlapped section of the
previous map is effectively unmapped, but the non-overlapping sections are
still valid.

maps__fixup_overlappings() is responsible for creating any new map entries from
the previously overlapped map. It optionally creates a before and an after map.

When creating the after map the existing code failed to adjust the map.pgoff.
This meant the new after map would incorrectly calculate the file offset
for the ip. This results in incorrect symbol name resolution for any ip in the
after region.

Make maps__fixup_overlappings() correctly populate map.pgoff.

Add an assert that new mapping matches old mapping at the beginning of
the after map.

Committer-testing:

Validated correct parsing of libcoreclr.so symbols from .NET Core 3.0 preview9
(which didn't strip symbols).

Preparation:

  ~/dotnet3.0-preview9/dotnet new webapi -o perfSymbol
  cd perfSymbol
  ~/dotnet3.0-preview9/dotnet publish
  perf record ~/dotnet3.0-preview9/dotnet \
      bin/Debug/netcoreapp3.0/publish/perfSymbol.dll
  ^C

Before:

  perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\
     grep libcoreclr.so | head -n 4
        dotnet  1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \
            [0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \
            r-xp .../3.0.0-preview9-19423-09/libcoreclr.so
        dotnet  1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \
            [0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \
            rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
        dotnet  1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \
            [0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \
            rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
        dotnet  1907 373352.705249:     250000 cpu-clock: \
             7fe6159a1f99 [unknown] \
             (.../3.0.0-preview9-19423-09/libcoreclr.so)

After:

  perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\
     grep libcoreclr.so | head -n 4
        dotnet  1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \
            [0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \
            r-xp .../3.0.0-preview9-19423-09/libcoreclr.so
        dotnet  1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \
            [0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \
            rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
        dotnet  1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \
            [0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \
            rwxp .../3.0.0-preview9-19423-09/libcoreclr.so

All the [unknown] symbols were resolved.

Signed-off-by: Steve MacLean <Steve.MacLean@Microsoft.com>
Tested-by: Brian Robbins <brianrob@microsoft.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: John Keeping <john@metanate.com>
Cc: John Salem <josalem@microsoft.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom McDonald <thomas.mcdonald@microsoft.com>
Link: http://lore.kernel.org/lkml/BN8PR21MB136270949F22A6A02335C238F7800@BN8PR21MB1362.namprd21.prod.outlook.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tests: Avoid raising SEGV using an obvious NULL dereference

[ Upstream commit e3e2cf3d5b1fe800b032e14c0fdcd9a6fb20cf3b ]

An optimized build such as:

  make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-O3

will turn the dereference operation into a ud2 instruction, raising a
SIGILL rather than a SIGSEGV. Use raise(..) for correctness and clarity.

Similar issues were addressed in Numfor Mbiziwo-Tiapo's patch:

  https://lkml.org/lkml/2019/7/8/1234

Committer testing:

Before:

  [root@quaco ~]# perf test hooks
  55: perf hooks                                            : Ok
  [root@quaco ~]# perf test -v hooks
  55: perf hooks                                            :
  --- start ---
  test child forked, pid 17092
  SIGSEGV is observed as expected, try to recover.
  Fatal error (SEGFAULT) in perf hook 'test'
  test child finished with 0
  ---- end ----
  perf hooks: Ok
  [root@quaco ~]#

After:

  [root@quaco ~]# perf test hooks
  55: perf hooks                                            : Ok
  [root@quaco ~]# perf test -v hooks
  55: perf hooks                                            :
  --- start ---
  test child forked, pid 17909
  SIGSEGV is observed as expected, try to recover.
  Fatal error (SEGFAULT) in perf hook 'test'
  test child finished with 0
  ---- end ----
  perf hooks: Ok
  [root@quaco ~]#

Fixes: a074865e60ed ("perf tools: Introduce perf hooks")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/20190925195924.152834-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libsubcmd: Make _FORTIFY_SOURCE defines dependent on the feature

[ Upstream commit 4b0b2b096da9d296e0e5668cdfba8613bd6f5bc8 ]

Unconditionally defining _FORTIFY_SOURCE can break tools that don't work
with it, such as memory sanitizers:

  https://github.com/google/sanitizers/wiki/AddressSanitizer#faq

Fixes: 4b6ab94eabe4 ("perf subcmd: Create subcmd library")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20190925195924.152834-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: fix center temperature of bmc150-accel-core

[ Upstream commit 6c59a962e081df6d8fe43325bbfabec57e0d4751 ]

The center temperature of the supported devices stored in the constant
BMC150_ACCEL_TEMP_CENTER_VAL is not 24 degrees but 23 degrees.

It seems that some datasheets were inconsistent on this value leading
to the error.  For most usecases will only make minor difference so
not queued for stable.

Signed-off-by: Pascal Bouwmann <bouwmann@tau-tec.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: meson_saradc: Fix memory allocation order

[ Upstream commit de10ac47597e7a3596b27631d0d5ce5f48d2c099 ]

meson_saradc's irq handler uses priv->regmap so make sure that it is
allocated before the irq get enabled.

This also fixes crash when CONFIG_DEBUG_SHIRQ is enabled, as device
managed resources are freed in the inverted order they had been
allocated, priv->regmap was freed before the spurious fake irq that
CONFIG_DEBUG_SHIRQ adds called the handler.

Fixes: 3af109131b7eb8 ("iio: adc: meson-saradc: switch from polling to interrupt mode")
Reported-by: Elie Roudninski <xademax@gmail.com>
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Elie ROUDNINSKI <xademax@gmail.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: max14656: fix potential use-after-free

[ Upstream commit 252fbeb86ceffa549af9842cefca2412d53a7653 ]

Explicitly cancel/sync the irq_work delayed work, otherwise
there's a chance that it will run after the device is removed,
which would result in a use-after-free.

Note that cancel/sync should happen:
- after irq's have been disabled, as the isr re-schedules the work
- before the power supply is unregistered, because the work func
    uses the power supply handle.

Cc: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: fix odm combine pipe reset

[ Upstream commit f25f06b67ba237b76092a6fc522b1a94e84bfa85 ]

We fail to reset the second odm combine pipe. This change fixes
odm pointer management.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/PME: Fix possible use-after-free on remove

[ Upstream commit 7cf58b79b3072029af127ae865ffc6f00f34b1f8 ]

In remove(), ensure that the PME work cannot run after kfree() is called.
Otherwise, this could result in a use-after-free.

This issue was detected with the help of Coccinelle.

Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sinan Kaya <okaya@kernel.org>
Cc: Frederick Lawler <fred@fredlawl.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mv88e6xxx: Release lock while requesting IRQ

[ Upstream commit 342a0ee70acbee97fdeb91349420f8744eb291fb ]

There is no need to hold the register lock while requesting the GPIO
interrupt. By not holding it we can also avoid a false positive
lockdep splat.

Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

exec: load_script: Do not exec truncated interpreter path

[ Upstream commit b5372fe5dc84235dbe04998efdede3c4daa866a9 ]

Commit 8099b047ecc4 ("exec: load_script: don't blindly truncate
shebang string") was trying to protect against a confused exec of a
truncated interpreter path. However, it was overeager and also refused
to truncate arguments as well, which broke userspace, and it was
reverted. This attempts the protection again, but allows arguments to
remain truncated. In an effort to improve readability, helper functions
and comments have been added.

Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Samuel Dionne-Riel <samuel@dionne-riel.com>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Cc: Graham Christensen <graham@grahamc.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: disallow files with EXT4_JOURNAL_DATA_FL from EXT4_IOC_SWAP_BOOT

[ Upstream commit 6e589291f4b1b700ca12baec5930592a0d51e63c ]

A malicious/clueless root user can use EXT4_IOC_SWAP_BOOT to force a
corner casew which can lead to the file system getting corrupted.
There's no usefulness to allowing this, so just prohibit this case.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vimc: Remove unused but set variables

[ Upstream commit 5515e414f42bf2769caae15b634004d456658284 ]

Remove unused but set variables to clean up the code and avoid
warning.

Signed-off-by: Lucas A. M. Magalhães <lucmaga@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek - Apply ALC294 hp init also for S4 resume

[ Upstream commit f6ef4e0e284251ff795c541db1129c84515ed044 ]

The init sequence for ALC294 headphone stuff is needed not only for
the boot up time but also for the resume from hibernation, where the
device is switched from the boot kernel without sound driver to the
suspended image.  Since we record the PM event in the device
power_state field, we can now recognize the call pattern and apply the
sequence conditionally.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: add credits from unmatched responses/messages

[ Upstream commit eca004523811f816bcfca3046ab54e1278e0973b ]

We should add any credits granted to us from unmatched server responses.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

CIFS: Respect SMB2 hdr preamble size in read responses

[ Upstream commit bb1bccb60c2ebd9a6f895507d1d48d5ed773814e ]

There are a couple places where we still account for 4 bytes
in the beginning of SMB2 packet which is not true in the current
code. Fix this to use a header preamble size where possible.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Correct localport timeout duration error

[ Upstream commit 2a0fb340fcc816975b8b0f2fef913d11999c39cf ]

Current code incorrectly specifies a completion wait timeout duration in 5
jiffies, when it should have been 5 seconds.

Fix the adjust for units for the completion timeout call.

[mkp: manual merge]

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxsw: spectrum: Set LAG port collector only when active

[ Upstream commit 48ebab31d424fbdb8ede8914923bec671a933246 ]

The LAG port collecting (receive) function was mistakenly set when the
port was registered as a LAG member, while it should be set only when
the port collection state is set to true. Set LAG port to collecting
when it is set to distributing, as described in the IEEE link
aggregation standard coupled control mux machine state diagram.

Signed-off-by: Nir Dotan <nird@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: kpti: Whitelist HiSilicon Taishan v110 CPUs

[ Upstream commit 0ecc471a2cb7d4d386089445a727f47b59dc9b6e ]

HiSilicon Taishan v110 CPUs didn't implement CSV3 field of the
ID_AA64PFR0_EL1 and are not susceptible to Meltdown, so whitelist
the MIDR in kpti_safe_list[] table.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Zhangshaokun <zhangshaokun@hisilicon.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: Add MIDR encoding for HiSilicon Taishan CPUs

commit efd00c722ca855745fcc35a7e6675b5a782a3fc8 upstream.

Adding the MIDR encodings for HiSilicon Taishan v110 CPUs,
which is used in Kunpeng ARM64 server SoCs. TSV110 is the
abbreviation of Taishan v110.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Zhangshaokun <zhangshaokun@hisilicon.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: pcf8523: set xtal load capacitance from DT

[ Upstream commit 189927e719e36ceefbb8037f23d3849e47833aef ]

Add support for specifying the xtal load capacitance in the DT node.
The pcf8523 supports xtal load capacitance of 7pF or 12.5pF.
If the rtc has the wrong configuration the time will
drift several hours/week.

The driver use the default value 12.5pF.

The DT may specify either 7000fF or 12500fF.
(The DT uses femto Farad to avoid decimal numbers).
Other values are warned and the driver uses the default value.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: handle warm-reset port requests on hub resume

[ Upstream commit 4fdc1790e6a9ef22399c6bc6e63b80f4609f3b7e ]

On plug-in of my USB-C device, its USB_SS_PORT_LS_SS_INACTIVE
link state bit is set. Greping all the kernel for this bit shows
that the port status requests a warm-reset this way.

This just happens, if its the only device on the root hub, the hub
therefore resumes and the HCDs status_urb isn't yet available.
If a warm-reset request is detected, this sets the hubs event_bits,
which will prevent any auto-suspend and allows the hubs workqueue
to warm-reset the port later in port_event.

Signed-off-by: Jan-Marek Glogowski <glogow@fbihome.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Cleanup DSD whitelist

[ Upstream commit 202e69e645545e8dcec5e239658125276a7a315a ]

XMOS/Thesycon family of USB Audio Class firmware flags DSD altsetting
separate from the PCM ones. Thus the DSD altsetting can be auto-detected
based on the flag and doesn't need maintaining specific altsetting
whitelist.

In addition, static VID:PID-to-altsetting whitelisting causes problems
when firmware update changes the altsetting, or same VID:PID is reused
for another device that has different kind of firmware.

This patch removes existing explicit whitelist mappings for XMOS VID
(0x20b1) and Thesycon VID (0x152a).

Also corrects placement of Hegel HD12 and NuPrime DAC-10 to keep list
sorted based on VID.

Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: gadget: clear DWC3_EP_TRANSFER_STARTED on cmd complete

[ Upstream commit acbfa6c26f21a18830ee064b588c92334305b6af ]

We must wait until End Transfer completes in order to clear
DWC3_EP_TRANSFER_STARTED, otherwise we may confuse the driver.

This patch is in preparation to fix a rare race condition that happens
upon Disconnect Interrupt.

Tested-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: gadget: early giveback if End Transfer already completed

[ Upstream commit 9f45581f5eec6786c6eded2b3c85345d82a910c9 ]

There is a rare race condition that may happen during a Disconnect
Interrupt if we have a started request that happens to be
dequeued *after* completion of End Transfer command. If that happens,
that request will be left waiting for completion of an End Transfer
command that will never happen.

If End Transfer command has already completed before, we are safe to
giveback the request straight away.

Tested-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples: bpf: fix: seg fault with NULL pointer arg

[ Upstream commit d59dd69d5576d699d7d3f5da0b4738c3a36d0133 ]

When NULL pointer accidentally passed to write_kprobe_events,
due to strlen(NULL), segmentation fault happens.
Changed code returns -1 to deal with this situation.

Bug issued with Smatch, static analysis.

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: steam: fix deadlock with input devices.

[ Upstream commit 6b538cc21334b83f09b25dec4aa2d2726bf07ed0 ]

When using this driver with the wireless dongle and some usermode
program that monitors every input device (acpid, for example), while
another usermode client opens and closes the low-level device
repeadedly, the system eventually deadlocks.

The reason is that steam_input_register_device() must not be called with
the mutex held, because the input subsystem has its own synchronization
that clashes with this one: it is possible that steam_input_open() is
called before input_register_device() returns, and since
steam_input_open() needs to lock the mutex, it deadlocks.

However we must hold the mutex when calling any function that sends
commands to the controller. If not, random commands end up falling fail.

Reported-by: Simon Gene Gottlieb <simon@gottliebtfreitag.de>
Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Tested-by: Simon Gene Gottlieb <simon@gottliebtfreitag.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: steam: fix boot loop with bluetooth firmware

[ Upstream commit cf28aee292e102740e49f74385b4b89c00050763 ]

There is a new firmware for the Steam Controller with support for BLE
connections. When using such a device with a wired connection, it
reboots itself every 10 seconds unless an application has opened it.

Doing hid_hw_open() unconditionally on probe fixes the issue, and the
code becomes simpler.

Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4: Ensure that the state manager exits the loop on SIGKILL

[ Upstream commit a1aa09be21fa344d1f5585aab8164bfae55f57e3 ]

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: Add ASUS T100CHI keyboard dock battery quirks

[ Upstream commit a767ffea05d2737f6542cd78458a84a157fa216d ]

Add ASUS Transbook T100CHI/T90CHI keyboard dock into battery quirk list, in
order to add specific implementation in hid-asus.

Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: mt7621-pinctrl: use pinconf-generic for 'dt_node_to_map' and 'dt_free_map'

[ Upstream commit 0ca1f90861b6d64386261096b42bfc81ce11948a ]

Instead of reimplement afunction to do 'dt_node_to_map' task like
'rt2880_pinctrl_dt_node_to_map' make use of 'pinconf_generic_dt_node_to_map_all'
generic function for this task. Also use its equivalent function for free which
is 'pinconf_generic_dt_free_map'. Remove 'rt2880_pinctrl_dt_node_to_map' function
which is not needed anymore. This decrease a bit driver LOC and make it more
generic. To properly compile this changes 'GENERIC_PINCONF' option is selected
with the driver in its Kconfig file.

This also fix a problem with function 'rt2880_pinctrl_dt_node_to_map' which was
calling internally 'pinctrl_utils_reserve_map' which expects 'num_maps' to be initialized.
It does a memory allocation based on the value, and triggers the following
warning if is not properly set:

if (unlikely(order >= MAX_ORDER)) {
        WARN_ON_ONCE(!(gfp_mask & __GFP_NOWARN));
        return NULL;
}

Generic function 'pinconf_generic_dt_node_to_map_all' initializes properly
'num_maps' to zero fixing the problem.

Fixes: e12a1a6e087b ("staging: mt7621-pinctrl: refactor rt2880_pinctrl_dt_node_to_map function")
Reported-by: NeilBrown <neil@brown.name>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scripts/setlocalversion: Improve -dirty check with git-status --no-optional-locks

[ Upstream commit ff64dd4857303dd5550faed9fd598ac90f0f2238 ]

git-diff-index does not refresh the index for you, so using it for a
"-dirty" check can give misleading results. Commit 6147b1cf19651
("scripts/setlocalversion: git: Make -dirty check more robust") tried to
fix this by switching to git-status, but it overlooked the fact that
git-status also writes to the .git directory of the source tree, which
is definitely not kosher for an out-of-tree (O=) build. That is getting
reverted.

Fortunately, git-status now supports avoiding writing to the index via
the --no-optional-locks flag, as of git 2.14. It still calculates an
up-to-date index, but it avoids writing it out to the .git directory.

So, let's retry the solution from commit 6147b1cf19651 using this new
flag first, and if it fails, we assume this is an older version of git
and just use the old git-diff-index method.

It's hairy to get the 'grep -vq' (inverted matching) correct by stashing
the output of git-status (you have to be careful about the difference
betwen "empty stdin" and "blank line on stdin"), so just pipe the output
directly to grep and use a regex that's good enough for both the
git-status and git-diff-index version.

Cc: Christian Kujau <lists@nerdbynature.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Genki Sky <sky@genki.is>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: boston: unregister clks on failure in clk_boston_setup()

[ Upstream commit 8b627f616ed63dcaf922369fc14a5daf8ad03038 ]

The registered clks should unregister when something wrong happens
before going out in function clk_boston_setup().

Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: assign 'n_cipher_suites = 11' for WCN3990 to enable WPA3

[ Upstream commit 7ba31e6e0cdc0cc2e60e1fcbf467f3c95aea948e ]

Hostapd uses CCMP, GCMP & GCMP-256 as 'wpa_pairwise' option to run WPA3.
In WCN3990 firmware cipher suite numbers 9 to 11 are for CCMP,
GCMP & GCMP-256.

To enable CCMP, GCMP & GCMP-256 cipher suites in WCN3990 firmware,
host sets 'n_cipher_suites = 11' while initializing hardware parameters.

Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1

Signed-off-by: Abhishek Ambure <aambure@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: Fix config space access for intel_atomisp2_pm

[ Upstream commit 6a31061833a52a79c99221b6251db08cf377470e ]

We lose even config space access when we power gate the ISP
via the PUNIT. That makes lspci & co. produce gibberish.

To fix that let's try to implement actual runtime pm hooks
and inform the pci core that the device always goes to
D3cold. That will cause the pci core to resume the device
before attempting config space access.

This introduces another annoyance though. We get the
following error every time we try to resume the device:
intel_atomisp2_pm 0000:00:03.0: Refused to change power state, currently in D3

The reason being that the pci core tries to put the device
back into D0 via the standard PCI PM mechanism before
calling the driver resume hook. To fix this properly
we'd need to infiltrate the platform pm hooks (could
turn ugly real fast), or use pm domains (which don't
seem to exist on x86), or some extra early resume
hook for the driver (which doesn't exist either).
So maybe we just choose to live with the error?

Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: Add the VLV ISP PCI ID to atomisp2_pm

[ Upstream commit 8a7d7141528ad67e465bc6afacc6a3144d1fe320 ]

If the ISP is exposed as a PCI device VLV machines need the
same treatment as CHV machines to power gate the ISP. Otherwise
s0ix will not work.

Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: i2c-hid: Add Odys Winbook 13 to descriptor override

[ Upstream commit f8f807441eefddc3c6d8a378421f0ede6361d565 ]

The Odys Winbook 13 uses a SIPODEV SP1064 touchpad, which does not
supply descriptors, add this to the DMI descriptor override list, fixing
the touchpad not working.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1526312
Reported-by: Rene Wagner <redhatbugzilla@callerid.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: i2c-hid: Ignore input report if there's no data present on Elan touchpanels

[ Upstream commit 1475af255e18f35dc46f8a7acc18354c73d45149 ]

While using Elan touchpads, the message floods:
[  136.138487] i2c_hid i2c-DELL08D6:00: i2c_hid_get_input: incomplete report (14/65535)

Though the message flood is annoying, the device it self works without
any issue. I suspect that the device in question takes too much time to
pull the IRQ back to high after I2C host has done reading its data.

Since the host receives all useful data, let's ignore the input report
when there's no data.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: i2c-hid: Disable runtime PM for LG touchscreen

[ Upstream commit 86c31524b27c7e686841dd4a79eda95cfd989f16 ]

LG touchscreen (1fd2:8001) stops working after reboot:
[ 4.859153] i2c_hid i2c-SAPS2101:00: i2c_hid_get_input: incomplete report (64/66)
[ 4.936070] i2c_hid i2c-SAPS2101:00: i2c_hid_get_input: incomplete report (64/66)
[ 9.948224] i2c_hid i2c-SAPS2101:00: failed to reset device.

The device in question stops working after receives SLEEP, ON, SLEEP
commands in a short period. The scenario is like this:
- Once the desktop session closes, it also closed the hid device, so the
device gets runtime suspended and receives a SLEEP command.
- Before calling shutdown callback, it gets runtime resumed and received
an ON command.
- In the shutdown callback, it receives another SLEEP command.

I failed to find a reliable interval between ON/SLEEP commands that can
make it work, so let's simply disable runtime PM for the device.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ipset: Make invalid MAC address checks consistent

[ Upstream commit 29edbc3ebdb0faa934114f14bf12fc0b784d4f1b ]

Set types bitmap:ipmac and hash:ipmac check that MAC addresses
are not all zeroes.

Introduce one missing check, and make the remaining ones
consistent, using is_zero_ether_addr() instead of comparing
against an array containing zeroes.

This was already done for hash:mac sets in commit 26c97c5d8dac
("netfilter: ipset: Use is_zero_ether_addr instead of static and
memcmp").

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Btrfs: fix deadlock on tree root leaf when finding free extent

[ Upstream commit 4222ea7100c0e37adace2790c8822758bbeee179 ]

When we are writing out a free space cache, during the transaction commit
phase, we can end up in a deadlock which results in a stack trace like the
following:

 schedule+0x28/0x80
 btrfs_tree_read_lock+0x8e/0x120 [btrfs]
 ? finish_wait+0x80/0x80
 btrfs_read_lock_root_node+0x2f/0x40 [btrfs]
 btrfs_search_slot+0xf6/0x9f0 [btrfs]
 ? evict_refill_and_join+0xd0/0xd0 [btrfs]
 ? inode_insert5+0x119/0x190
 btrfs_lookup_inode+0x3a/0xc0 [btrfs]
 ? kmem_cache_alloc+0x166/0x1d0
 btrfs_iget+0x113/0x690 [btrfs]
 __lookup_free_space_inode+0xd8/0x150 [btrfs]
 lookup_free_space_inode+0x5b/0xb0 [btrfs]
 load_free_space_cache+0x7c/0x170 [btrfs]
 ? cache_block_group+0x72/0x3b0 [btrfs]
 cache_block_group+0x1b3/0x3b0 [btrfs]
 ? finish_wait+0x80/0x80
 find_free_extent+0x799/0x1010 [btrfs]
 btrfs_reserve_extent+0x9b/0x180 [btrfs]
 btrfs_alloc_tree_block+0x1b3/0x4f0 [btrfs]
 __btrfs_cow_block+0x11d/0x500 [btrfs]
 btrfs_cow_block+0xdc/0x180 [btrfs]
 btrfs_search_slot+0x3bd/0x9f0 [btrfs]
 btrfs_lookup_inode+0x3a/0xc0 [btrfs]
 ? kmem_cache_alloc+0x166/0x1d0
 btrfs_update_inode_item+0x46/0x100 [btrfs]
 cache_save_setup+0xe4/0x3a0 [btrfs]
 btrfs_start_dirty_block_groups+0x1be/0x480 [btrfs]
 btrfs_commit_transaction+0xcb/0x8b0 [btrfs]

At cache_save_setup() we need to update the inode item of a block group's
cache which is located in the tree root (fs_info->tree_root), which means
that it may result in COWing a leaf from that tree. If that happens we
need to find a free metadata extent and while looking for one, if we find
a block group which was not cached yet we attempt to load its cache by
calling cache_block_group(). However this function will try to load the
inode of the free space cache, which requires finding the matching inode
item in the tree root - if that inode item is located in the same leaf as
the inode item of the space cache we are updating at cache_save_setup(),
we end up in a deadlock, since we try to obtain a read lock on the same
extent buffer that we previously write locked.

So fix this by using the tree root's commit root when searching for a
block group's free space cache inode item when we are attempting to load
a free space cache. This is safe since block groups once loaded stay in
memory forever, as well as their caches, so after they are first loaded
we will never need to read their inode items again. For new block groups,
once they are created they get their ->cached field set to
BTRFS_CACHE_FINISHED meaning we will not need to read their inode item.

Reported-by: Andrew Nelson <andrew.s.nelson@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAPTELenq9x5KOWuQ+fa7h1r3nsJG8vyiTH8+ifjURc_duHh2Wg@mail.gmail.com/
Fixes: 9d66e233c704 ("Btrfs: load free space cache if it exists")
Tested-by: Andrew Nelson <andrew.s.nelson@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Fix Switchtec DMA aliasing quirk dmesg noise

[ Upstream commit 742bbe1ee35b5699c092541f97c7cec326556bb1 ]

Currently the Switchtec quirk runs on all endpoints in the switch,
including all the upstream and downstream ports.  These other functions do
not contain BARs, so the quirk fails when trying to map the BAR and prints
the error "Cannot iomap Switchtec device".  The user will see a few of
these useless and scary errors, one for each port in the switch.

At most, the quirk should only run on either a management endpoint
(PCI_CLASS_MEMORY_OTHER) or an NTB endpoint (PCI_CLASS_BRIDGE_OTHER).
However, the quirk is useless except in NTB applications, so we will
only run it when the class is PCI_CLASS_BRIDGE_OTHER.

Switch to using DECLARE_PCI_FIXUP_CLASS_FINAL and only match
PCI_CLASS_BRIDGE_OTHER.

Reported-by: Stephen Bates <sbates@raithlin.com>
Fixes: ad281ecf1c7d ("PCI: Add DMA alias quirk for Microsemi Switchtec NTB")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
[bhelgaas: split SWITCHTEC_QUIRK() introduction to separate patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Doug Meyer <dmeyer@gigaio.com>
Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: fix input overflow to writeback_rate_minimum

[ Upstream commit dab71b2db98dcdd4657d151b01a7be88ce10f9d1 ]

dc->writeback_rate_minimum is type unsigned integer variable, it is set
via sysfs interface, and converte from input string to unsigned integer
by d_strtoul_nonzero(). When the converted input value is larger than
UINT_MAX, overflow to unsigned integer happens.

This patch fixes the overflow by using sysfs_strotoul_clamp() to
convert input string and limit the value in range [1, UINT_MAX], then
the overflow can be avoided.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: handle failures while initializing displays

[ Upstream commit a802ee99c448ca0496fa307f3e46b834ae2a46a3 ]

Bail out KMS hw init on display initialization failures with
proper error logging.

changes in v3:
    - introduced in the series
changes in v4:
    - avoid duplicate return on errors (Sean Paul)
    - avoid spamming errors on failures (Jordon Crouse)

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/cpu: Add Atom Tremont (Jacobsville)

[ Upstream commit 00ae831dfe4474ef6029558f5eb3ef0332d80043 ]

Add the Atom Tremont model number to the Intel family list.

[ Tony: Also update comment at head of file to say "_X" suffix is
  also used for microserver parts. ]

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Megha Dey <megha.dey@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190125195902.17109-4-tony.luck@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/power turbostat: fix goldmont C-state limit decoding

[ Upstream commit 445640a563493f28d15f47e151e671281101e7dc ]

When the C-state limit is 8 on Goldmont, PC10 is enabled.
Previously turbostat saw this as "undefined", and thus assumed
it should not show some counters, such as pc3, pc6, pc7.

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: fix unbalanced use of external vbus-supply

[ Upstream commit cd7cd0e6cedfda8da6668a4af6748f96bbb6fed4 ]

When using external vbus supply regulator, it should be enabled
synchronously with PWR bit in HPRT register. This also fixes
unbalanced use of this optional regulator (This can be reproduced
easily when unbinding the driver).

Fixes: 531ef5ebea96 ("usb: dwc2: add support for host mode external
vbus supply")

Tested-by: Artur Petrosyan <arturp@synopsys.com>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: i2c-hid: add Direkt-Tek DTLAPY133-1 to descriptor override

[ Upstream commit 399474e4c1100bca264ed14fa3ad0d68fab484d8 ]

This device uses the SIPODEV SP1064 touchpad, which does not
supply descriptors, so it has to be added to the override list.

Reported-by: Tim Aldridge <taldridge@mac.com>
Signed-off-by: Julian Sax <jsbc@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to recover inode->i_flags of inode block during POR

[ Upstream commit 0c093b590efb5c1ccdc835868dc2ae94bd2e14dc ]

Testcase to reproduce this bug:
1. mkfs.f2fs /dev/sdd
2. mount -t f2fs /dev/sdd /mnt/f2fs
3. touch /mnt/f2fs/file
4. sync
5. chattr +a /mnt/f2fs/file
6. xfs_io -a /mnt/f2fs/file -c "fsync"
7. godown /mnt/f2fs
8. umount /mnt/f2fs
9. mount -t f2fs /dev/sdd /mnt/f2fs
10. xfs_io /mnt/f2fs/file

There is no error when opening this file w/o O_APPEND, but actually,
we expect the correct result should be:

/mnt/f2fs/file: Operation not permitted

The root cause is, in recover_inode(), we recover inode->i_flags more
than F2FS_I(inode)->i_flags, so fix it.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to recover inode's i_gc_failures during POR

[ Upstream commit 7de36cf3e4087207f42a88992f8cb615a1bd902e ]

inode.i_gc_failures is used to indicate that skip count of migrating
on blocks of inode, we should guarantee it can be recovered in sudden
power-off case.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/powernv: hold device_hotplug_lock when calling memtrace_offline_pages()

[ Upstream commit 5666848774ef43d3db5151ec518f1deb63515c20 ]

Let's perform all checking + offlining + removing under
device_hotplug_lock, so nobody can mess with these devices via sysfs
concurrently.

[david@redhat.com: take device_hotplug_lock outside of loop]
Link: http://lkml.kernel.org/r/20180927092554.13567-6-david@redhat.com
Link: http://lkml.kernel.org/r/20180925091457.28651-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rashmica Gupta <rashmica.g@gmail.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sc16is7xx: Fix for "Unexpected interrupt: 8"

[ Upstream commit 30ec514d440cf2c472c8e4b0079af2c731f71a3e ]

The SC16IS752 has an Enhanced Feature Register which is aliased at the
same address as the Interrupt Identification Register; accessing it
requires that a magic value is written to the Line Configuration
Register. If an interrupt is raised while the EFR is mapped in then
the ISR won't be able to access the IIR, leading to the "Unexpected
interrupt" error messages.

Avoid the problem by claiming a mutex around accesses to the EFR
register, also claiming the mutex in the interrupt handler work
item (this is equivalent to disabling interrupts to interlock against
a non-threaded interrupt handler).

See: https://github.com/raspberrypi/linux/issues/2529

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix a duplicate 0711 log message number.

[ Upstream commit 2c4c91415a05677acc5c8131a5eb472d4aa96ae1 ]

Renumber one of the 0711 log messages so there isn't a duplication.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: flush quota blocks after turnning it off

[ Upstream commit 0e0667b625cf64243df83171bff61f9d350b9ca5 ]

After quota_off, we'll get some dirty blocks. If put_super don't have a chance
to flush them by checkpoint, it causes NULL pointer exception in end_io after
iput(node_inode). (e.g., by checkpoint=disable)

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wil6210: fix freeing of rx buffers in EDMA mode

[ Upstream commit 6470f31927b46846d957628b719dcfda05446664 ]

After being associated with some EDMA rx traffic, upon "down" driver
doesn't free all skbs in the rx ring.
Modify wil_move_all_rx_buff_to_free_list to loop on active list of rx
buffers, unmap the physical memory and free the skb.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: tracepoints: Fix wrong parameter order for qgroup events

[ Upstream commit fd2b007eaec898564e269d1f478a2da0380ecf51 ]

[BUG]
For btrfs:qgroup_meta_reserve event, the trace event can output garbage:

  qgroup_meta_reserve: 9c7f6acc-b342-4037-bc47-7f6e4d2232d7: refroot=5(FS_TREE) type=DATA diff=2

The diff should always be alinged to sector size (4k), so there is
definitely something wrong.

[CAUSE]
For the wrong @diff, it's caused by wrong parameter order.
The correct parameters are:

  struct btrfs_root, s64 diff, int type.

However the parameters used are:

  struct btrfs_root, int type, s64 diff.

Fixes: 4ee0d8832c2e ("btrfs: qgroup: Update trace events for metadata reservation")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: qgroup: Always free PREALLOC META reserve in btrfs_delalloc_release_extents()

[ Upstream commit 8702ba9396bf7bbae2ab93c94acd4bd37cfa4f09 ]

[Background]
Btrfs qgroup uses two types of reserved space for METADATA space,
PERTRANS and PREALLOC.

PERTRANS is metadata space reserved for each transaction started by
btrfs_start_transaction().
While PREALLOC is for delalloc, where we reserve space before joining a
transaction, and finally it will be converted to PERTRANS after the
writeback is done.

[Inconsistency]
However there is inconsistency in how we handle PREALLOC metadata space.

The most obvious one is:
In btrfs_buffered_write():
btrfs_delalloc_release_extents(BTRFS_I(inode), reserve_bytes, true);

We always free qgroup PREALLOC meta space.

While in btrfs_truncate_block():
btrfs_delalloc_release_extents(BTRFS_I(inode), blocksize, (ret != 0));

We only free qgroup PREALLOC meta space when something went wrong.

[The Correct Behavior]
The correct behavior should be the one in btrfs_buffered_write(), we
should always free PREALLOC metadata space.

The reason is, the btrfs_delalloc_* mechanism works by:
- Reserve metadata first, even it's not necessary
  In btrfs_delalloc_reserve_metadata()

- Free the unused metadata space
  Normally in:
  btrfs_delalloc_release_extents()
  |- btrfs_inode_rsv_release()
     Here we do calculation on whether we should release or not.

E.g. for 64K buffered write, the metadata rsv works like:

/* The first page */
reserve_meta: num_bytes=calc_inode_reservations()
free_meta: num_bytes=0
total: num_bytes=calc_inode_reservations()
/* The first page caused one outstanding extent, thus needs metadata
   rsv */

/* The 2nd page */
reserve_meta: num_bytes=calc_inode_reservations()
free_meta: num_bytes=calc_inode_reservations()
total: not changed
/* The 2nd page doesn't cause new outstanding extent, needs no new meta
   rsv, so we free what we have reserved */

/* The 3rd~16th pages */
reserve_meta: num_bytes=calc_inode_reservations()
free_meta: num_bytes=calc_inode_reservations()
total: not changed (still space for one outstanding extent)

This means, if btrfs_delalloc_release_extents() determines to free some
space, then those space should be freed NOW.
So for qgroup, we should call btrfs_qgroup_free_meta_prealloc() other
than btrfs_qgroup_convert_reserved_meta().

The good news is:
- The callers are not that hot
  The hottest caller is in btrfs_buffered_write(), which is already
  fixed by commit 336a8bb8e36a ("btrfs: Fix wrong
  btrfs_delalloc_release_extents parameter"). Thus it's not that
  easy to cause false EDQUOT.

- The trans commit in advance for qgroup would hide the bug
  Since commit f5fef4593653 ("btrfs: qgroup: Make qgroup async transaction
  commit more aggressive"), when btrfs qgroup metadata free space is slow,
  it will try to commit transaction and free the wrongly converted
  PERTRANS space, so it's not that easy to hit such bug.

[FIX]
So to fix the problem, remove the @qgroup_free parameter for
btrfs_delalloc_release_extents(), and always pass true to
btrfs_inode_rsv_release().

Reported-by: Filipe Manana <fdmanana@suse.com>
Fixes: 43b18595d660 ("btrfs: qgroup: Use separate meta reservation type for delalloc")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Btrfs: fix memory leak due to concurrent append writes with fiemap

[ Upstream commit c67d970f0ea8dcc423e112137d34334fa0abb8ec ]

When we have a buffered write that starts at an offset greater than or
equals to the file's size happening concurrently with a full ranged
fiemap, we can end up leaking an extent state structure.

Suppose we have a file with a size of 1Mb, and before the buffered write
and fiemap are performed, it has a single extent state in its io tree
representing the range from 0 to 1Mb, with the EXTENT_DELALLOC bit set.

The following sequence diagram shows how the memory leak happens if a
fiemap a buffered write, starting at offset 1Mb and with a length of
4Kb, are performed concurrently.

          CPU 1                                                  CPU 2

  extent_fiemap()
    --> it's a full ranged fiemap
        range from 0 to LLONG_MAX - 1
        (9223372036854775807)

    --> locks range in the inode's
        io tree
      --> after this we have 2 extent
          states in the io tree:
          --> 1 for range [0, 1Mb[ with
              the bits EXTENT_LOCKED and
              EXTENT_DELALLOC_BITS set
          --> 1 for the range
              [1Mb, LLONG_MAX[ with
              the EXTENT_LOCKED bit set

                                                  --> start buffered write at offset
                                                      1Mb with a length of 4Kb

                                                  btrfs_file_write_iter()

                                                    btrfs_buffered_write()
                                                      --> cached_state is NULL

                                                      lock_and_cleanup_extent_if_need()
                                                        --> returns 0 and does not lock
                                                            range because it starts
                                                            at current i_size / eof

                                                      --> cached_state remains NULL

                                                      btrfs_dirty_pages()
                                                        btrfs_set_extent_delalloc()
                                                          (...)
                                                          __set_extent_bit()

                                                            --> splits extent state for range
                                                                [1Mb, LLONG_MAX[ and now we
                                                                have 2 extent states:

                                                                --> one for the range
                                                                    [1Mb, 1Mb + 4Kb[ with
                                                                    EXTENT_LOCKED set
                                                                --> another one for the range
                                                                    [1Mb + 4Kb, LLONG_MAX[ with
                                                                    EXTENT_LOCKED set as well

                                                            --> sets EXTENT_DELALLOC on the
                                                                extent state for the range
                                                                [1Mb, 1Mb + 4Kb[
                                                            --> caches extent state
                                                                [1Mb, 1Mb + 4Kb[ into
                                                                @cached_state because it has
                                                                the bit EXTENT_LOCKED set

                                                    --> btrfs_buffered_write() ends up
                                                        with a non-NULL cached_state and
                                                        never calls anything to release its
                                                        reference on it, resulting in a
                                                        memory leak

Fix this by calling free_extent_state() on cached_state if the range was
not locked by lock_and_cleanup_extent_if_need().

The same issue can happen if anything else other than fiemap locks a range
that covers eof and beyond.

This could be triggered, sporadically, by test case generic/561 from the
fstests suite, which makes duperemove run concurrently with fsstress, and
duperemove does plenty of calls to fiemap. When CONFIG_BTRFS_DEBUG is set
the leak is reported in dmesg/syslog when removing the btrfs module with
a message like the following:

  [77100.039461] BTRFS: state leak: start 6574080 end 6582271 state 16402 in tree 0 refs 1

Otherwise (CONFIG_BTRFS_DEBUG not set) detectable with kmemleak.

CC: stable@vger.kernel.org # 4.16+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Btrfs: fix inode cache block reserve leak on failure to allocate data space

[ Upstream commit 29d47d00e0ae61668ee0c5d90bef2893c8abbafa ]

If we failed to allocate the data extent(s) for the inode space cache, we
were bailing out without releasing the previously reserved metadata. This
was triggering the following warnings when unmounting a filesystem:

  $ cat -n fs/btrfs/inode.c
  (...)
  9268  void btrfs_destroy_inode(struct inode *inode)
  9269  {
  (...)
  9276          WARN_ON(BTRFS_I(inode)->block_rsv.reserved);
  9277          WARN_ON(BTRFS_I(inode)->block_rsv.size);
  (...)
  9281          WARN_ON(BTRFS_I(inode)->csum_bytes);
  9282          WARN_ON(BTRFS_I(inode)->defrag_bytes);
  (...)

Several fstests test cases triggered this often, such as generic/083,
generic/102, generic/172, generic/269 and generic/300 at least, producing
stack traces like the following in dmesg/syslog:

  [82039.079546] WARNING: CPU: 2 PID: 13167 at fs/btrfs/inode.c:9276 btrfs_destroy_inode+0x203/0x270 [btrfs]
  (...)
  [82039.081543] CPU: 2 PID: 13167 Comm: umount Tainted: G        W         5.2.0-rc4-btrfs-next-50 #1
  [82039.081912] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
  [82039.082673] RIP: 0010:btrfs_destroy_inode+0x203/0x270 [btrfs]
  (...)
  [82039.083913] RSP: 0018:ffffac0b426a7d30 EFLAGS: 00010206
  [82039.084320] RAX: ffff8ddf77691158 RBX: ffff8dde29b34660 RCX: 0000000000000002
  [82039.084736] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8dde29b34660
  [82039.085156] RBP: ffff8ddf5fbec000 R08: 0000000000000000 R09: 0000000000000000
  [82039.085578] R10: ffffac0b426a7c90 R11: ffffffffb9aad768 R12: ffffac0b426a7db0
  [82039.086000] R13: ffff8ddf5fbec0a0 R14: dead000000000100 R15: 0000000000000000
  [82039.086416] FS:  00007f8db96d12c0(0000) GS:ffff8de036b00000(0000) knlGS:0000000000000000
  [82039.086837] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [82039.087253] CR2: 0000000001416108 CR3: 00000002315cc001 CR4: 00000000003606e0
  [82039.087672] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [82039.088089] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [82039.088504] Call Trace:
  [82039.088918]  destroy_inode+0x3b/0x70
  [82039.089340]  btrfs_free_fs_root+0x16/0xa0 [btrfs]
  [82039.089768]  btrfs_free_fs_roots+0xd8/0x160 [btrfs]
  [82039.090183]  ? wait_for_completion+0x65/0x1a0
  [82039.090607]  close_ctree+0x172/0x370 [btrfs]
  [82039.091021]  generic_shutdown_super+0x6c/0x110
  [82039.091427]  kill_anon_super+0xe/0x30
  [82039.091832]  btrfs_kill_super+0x12/0xa0 [btrfs]
  [82039.092233]  deactivate_locked_super+0x3a/0x70
  [82039.092636]  cleanup_mnt+0x3b/0x80
  [82039.093039]  task_work_run+0x93/0xc0
  [82039.093457]  exit_to_usermode_loop+0xfa/0x100
  [82039.093856]  do_syscall_64+0x162/0x1d0
  [82039.094244]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [82039.094634] RIP: 0033:0x7f8db8fbab37
  (...)
  [82039.095876] RSP: 002b:00007ffdce35b468 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  [82039.096290] RAX: 0000000000000000 RBX: 0000560d20b00060 RCX: 00007f8db8fbab37
  [82039.096700] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000560d20b00240
  [82039.097110] RBP: 0000560d20b00240 R08: 0000560d20b00270 R09: 0000000000000015
  [82039.097522] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f8db94bce64
  [82039.097937] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffdce35b6f0
  [82039.098350] irq event stamp: 0
  [82039.098750] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
  [82039.099150] hardirqs last disabled at (0): [<ffffffffb7884ff2>] copy_process.part.33+0x7f2/0x1f00
  [82039.099545] softirqs last  enabled at (0): [<ffffffffb7884ff2>] copy_process.part.33+0x7f2/0x1f00
  [82039.099925] softirqs last disabled at (0): [<0000000000000000>] 0x0
  [82039.100292] ---[ end trace f2521afa616ddccc ]---
  [82039.100707] WARNING: CPU: 2 PID: 13167 at fs/btrfs/inode.c:9277 btrfs_destroy_inode+0x1ac/0x270 [btrfs]
  (...)
  [82039.103050] CPU: 2 PID: 13167 Comm: umount Tainted: G        W         5.2.0-rc4-btrfs-next-50 #1
  [82039.103428] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
  [82039.104203] RIP: 0010:btrfs_destroy_inode+0x1ac/0x270 [btrfs]
  (...)
  [82039.105461] RSP: 0018:ffffac0b426a7d30 EFLAGS: 00010206
  [82039.105866] RAX: ffff8ddf77691158 RBX: ffff8dde29b34660 RCX: 0000000000000002
  [82039.106270] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8dde29b34660
  [82039.106673] RBP: ffff8ddf5fbec000 R08: 0000000000000000 R09: 0000000000000000
  [82039.107078] R10: ffffac0b426a7c90 R11: ffffffffb9aad768 R12: ffffac0b426a7db0
  [82039.107487] R13: ffff8ddf5fbec0a0 R14: dead000000000100 R15: 0000000000000000
  [82039.107894] FS:  00007f8db96d12c0(0000) GS:ffff8de036b00000(0000) knlGS:0000000000000000
  [82039.108309] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [82039.108723] CR2: 0000000001416108 CR3: 00000002315cc001 CR4: 00000000003606e0
  [82039.109146] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [82039.109567] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [82039.109989] Call Trace:
  [82039.110405]  destroy_inode+0x3b/0x70
  [82039.110830]  btrfs_free_fs_root+0x16/0xa0 [btrfs]
  [82039.111257]  btrfs_free_fs_roots+0xd8/0x160 [btrfs]
  [82039.111675]  ? wait_for_completion+0x65/0x1a0
  [82039.112101]  close_ctree+0x172/0x370 [btrfs]
  [82039.112519]  generic_shutdown_super+0x6c/0x110
  [82039.112988]  kill_anon_super+0xe/0x30
  [82039.113439]  btrfs_kill_super+0x12/0xa0 [btrfs]
  [82039.113861]  deactivate_locked_super+0x3a/0x70
  [82039.114278]  cleanup_mnt+0x3b/0x80
  [82039.114685]  task_work_run+0x93/0xc0
  [82039.115083]  exit_to_usermode_loop+0xfa/0x100
  [82039.115476]  do_syscall_64+0x162/0x1d0
  [82039.115863]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [82039.116254] RIP: 0033:0x7f8db8fbab37
  (...)
  [82039.117463] RSP: 002b:00007ffdce35b468 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  [82039.117882] RAX: 0000000000000000 RBX: 0000560d20b00060 RCX: 00007f8db8fbab37
  [82039.118330] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000560d20b00240
  [82039.118743] RBP: 0000560d20b00240 R08: 0000560d20b00270 R09: 0000000000000015
  [82039.119159] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f8db94bce64
  [82039.119574] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffdce35b6f0
  [82039.119987] irq event stamp: 0
  [82039.120387] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
  [82039.120787] hardirqs last disabled at (0): [<ffffffffb7884ff2>] copy_process.part.33+0x7f2/0x1f00
  [82039.121182] softirqs last  enabled at (0): [<ffffffffb7884ff2>] copy_process.part.33+0x7f2/0x1f00
  [82039.121563] softirqs last disabled at (0): [<0000000000000000>] 0x0
  [82039.121933] ---[ end trace f2521afa616ddccd ]---
  [82039.122353] WARNING: CPU: 2 PID: 13167 at fs/btrfs/inode.c:9278 btrfs_destroy_inode+0x1bc/0x270 [btrfs]
  (...)
  [82039.124606] CPU: 2 PID: 13167 Comm: umount Tainted: G        W         5.2.0-rc4-btrfs-next-50 #1
  [82039.125008] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
  [82039.125801] RIP: 0010:btrfs_destroy_inode+0x1bc/0x270 [btrfs]
  (...)
  [82039.126998] RSP: 0018:ffffac0b426a7d30 EFLAGS: 00010202
  [82039.127399] RAX: ffff8ddf77691158 RBX: ffff8dde29b34660 RCX: 0000000000000002
  [82039.127803] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8dde29b34660
  [82039.128206] RBP: ffff8ddf5fbec000 R08: 0000000000000000 R09: 0000000000000000
  [82039.128611] R10: ffffac0b426a7c90 R11: ffffffffb9aad768 R12: ffffac0b426a7db0
  [82039.129020] R13: ffff8ddf5fbec0a0 R14: dead000000000100 R15: 0000000000000000
  [82039.129428] FS:  00007f8db96d12c0(0000) GS:ffff8de036b00000(0000) knlGS:0000000000000000
  [82039.129846] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [82039.130261] CR2: 0000000001416108 CR3: 00000002315cc001 CR4: 00000000003606e0
  [82039.130684] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [82039.131142] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [82039.131561] Call Trace:
  [82039.131990]  destroy_inode+0x3b/0x70
  [82039.132417]  btrfs_free_fs_root+0x16/0xa0 [btrfs]
  [82039.132844]  btrfs_free_fs_roots+0xd8/0x160 [btrfs]
  [82039.133262]  ? wait_for_completion+0x65/0x1a0
  [82039.133688]  close_ctree+0x172/0x370 [btrfs]
  [82039.134157]  generic_shutdown_super+0x6c/0x110
  [82039.134575]  kill_anon_super+0xe/0x30
  [82039.134997]  btrfs_kill_super+0x12/0xa0 [btrfs]
  [82039.135415]  deactivate_locked_super+0x3a/0x70
  [82039.135832]  cleanup_mnt+0x3b/0x80
  [82039.136239]  task_work_run+0x93/0xc0
  [82039.136637]  exit_to_usermode_loop+0xfa/0x100
  [82039.137029]  do_syscall_64+0x162/0x1d0
  [82039.137418]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [82039.137812] RIP: 0033:0x7f8db8fbab37
  (...)
  [82039.139059] RSP: 002b:00007ffdce35b468 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  [82039.139475] RAX: 0000000000000000 RBX: 0000560d20b00060 RCX: 00007f8db8fbab37
  [82039.139890] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000560d20b00240
  [82039.140302] RBP: 0000560d20b00240 R08: 0000560d20b00270 R09: 0000000000000015
  [82039.140719] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f8db94bce64
  [82039.141138] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffdce35b6f0
  [82039.141597] irq event stamp: 0
  [82039.142043] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
  [82039.142443] hardirqs last disabled at (0): [<ffffffffb7884ff2>] copy_process.part.33+0x7f2/0x1f00
  [82039.142839] softirqs last  enabled at (0): [<ffffffffb7884ff2>] copy_process.part.33+0x7f2/0x1f00
  [82039.143220] softirqs last disabled at (0): [<0000000000000000>] 0x0
  [82039.143588] ---[ end trace f2521afa616ddcce ]---
  [82039.167472] WARNING: CPU: 3 PID: 13167 at fs/btrfs/extent-tree.c:10120 btrfs_free_block_groups+0x30d/0x460 [btrfs]
  (...)
  [82039.173800] CPU: 3 PID: 13167 Comm: umount Tainted: G        W         5.2.0-rc4-btrfs-next-50 #1
  [82039.174847] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
  [82039.177031] RIP: 0010:btrfs_free_block_groups+0x30d/0x460 [btrfs]
  (...)
  [82039.180397] RSP: 0018:ffffac0b426a7dd8 EFLAGS: 00010206
  [82039.181574] RAX: ffff8de010a1db40 RBX: ffff8de010a1db40 RCX: 0000000000170014
  [82039.182711] RDX: ffff8ddff4380040 RSI: ffff8de010a1da58 RDI: 0000000000000246
  [82039.183817] RBP: ffff8ddf5fbec000 R08: 0000000000000000 R09: 0000000000000000
  [82039.184925] R10: ffff8de036404380 R11: ffffffffb8a5ea00 R12: ffff8de010a1b2b8
  [82039.186090] R13: ffff8de010a1b2b8 R14: 0000000000000000 R15: dead000000000100
  [82039.187208] FS:  00007f8db96d12c0(0000) GS:ffff8de036b80000(0000) knlGS:0000000000000000
  [82039.188345] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [82039.189481] CR2: 00007fb044005170 CR3: 00000002315cc006 CR4: 00000000003606e0
  [82039.190674] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [82039.191829] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [82039.192978] Call Trace:
  [82039.194160]  close_ctree+0x19a/0x370 [btrfs]
  [82039.195315]  generic_shutdown_super+0x6c/0x110
  [82039.196486]  kill_anon_super+0xe/0x30
  [82039.197645]  btrfs_kill_super+0x12/0xa0 [btrfs]
  [82039.198696]  deactivate_locked_super+0x3a/0x70
  [82039.199619]  cleanup_mnt+0x3b/0x80
  [82039.200559]  task_work_run+0x93/0xc0
  [82039.201505]  exit_to_usermode_loop+0xfa/0x100
  [82039.202436]  do_syscall_64+0x162/0x1d0
  [82039.203339]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [82039.204091] RIP: 0033:0x7f8db8fbab37
  (...)
  [82039.206360] RSP: 002b:00007ffdce35b468 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  [82039.207132] RAX: 0000000000000000 RBX: 0000560d20b00060 RCX: 00007f8db8fbab37
  [82039.207906] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000560d20b00240
  [82039.208621] RBP: 0000560d20b00240 R08: 0000560d20b00270 R09: 0000000000000015
  [82039.209285] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f8db94bce64
  [82039.209984] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffdce35b6f0
  [82039.210642] irq event stamp: 0
  [82039.211306] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
  [82039.211971] hardirqs last disabled at (0): [<ffffffffb7884ff2>] copy_process.part.33+0x7f2/0x1f00
  [82039.212643] softirqs last  enabled at (0): [<ffffffffb7884ff2>] copy_process.part.33+0x7f2/0x1f00
  [82039.213304] softirqs last disabled at (0): [<0000000000000000>] 0x0
  [82039.213875] ---[ end trace f2521afa616ddccf ]---

Fix this by releasing the reserved metadata on failure to allocate data
extent(s) for the inode cache.

Fixes: 69fe2d75dd91d0 ("btrfs: make the delalloc block rsv per inode")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm snapshot: rework COW throttling to fix deadlock

[ Upstream commit b21555786f18cd77f2311ad89074533109ae3ffa ]

Commit 721b1d98fb517a ("dm snapshot: Fix excessive memory usage and
workqueue stalls") introduced a semaphore to limit the maximum number of
in-flight kcopyd (COW) jobs.

The implementation of this throttling mechanism is prone to a deadlock:

1. One or more threads write to the origin device causing COW, which is
   performed by kcopyd.

2. At some point some of these threads might reach the s->cow_count
   semaphore limit and block in down(&s->cow_count), holding a read lock
   on _origins_lock.

3. Someone tries to acquire a write lock on _origins_lock, e.g.,
   snapshot_ctr(), which blocks because the threads at step (2) already
   hold a read lock on it.

4. A COW operation completes and kcopyd runs dm-snapshot's completion
   callback, which ends up calling pending_complete().
   pending_complete() tries to resubmit any deferred origin bios. This
   requires acquiring a read lock on _origins_lock, which blocks.

   This happens because the read-write semaphore implementation gives
   priority to writers, meaning that as soon as a writer tries to enter
   the critical section, no readers will be allowed in, until all
   writers have completed their work.

   So, pending_complete() waits for the writer at step (3) to acquire
   and release the lock. This writer waits for the readers at step (2)
   to release the read lock and those readers wait for
   pending_complete() (the kcopyd thread) to signal the s->cow_count
   semaphore: DEADLOCK.

The above was thoroughly analyzed and documented by Nikos Tsironis as
part of his initial proposal for fixing this deadlock, see:
https://www.redhat.com/archives/dm-devel/2019-October/msg00001.html

Fix this deadlock by reworking COW throttling so that it waits without
holding any locks. Add a variable 'in_progress' that counts how many
kcopyd jobs are running. A function wait_for_in_progress() will sleep if
'in_progress' is over the limit. It drops _origins_lock in order to
avoid the deadlock.

Reported-by: Guruswamy Basavaiah <guru2018@gmail.com>
Reported-by: Nikos Tsironis <ntsironis@arrikto.com>
Reviewed-by: Nikos Tsironis <ntsironis@arrikto.com>
Tested-by: Nikos Tsironis <ntsironis@arrikto.com>
Fixes: 721b1d98fb51 ("dm snapshot: Fix excessive memory usage and workqueue stalls")
Cc: stable@vger.kernel.org # v5.0+
Depends-on: 4a3f111a73a8c ("dm snapshot: introduce account_start_copy() and account_end_copy()")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm snapshot: introduce account_start_copy() and account_end_copy()

[ Upstream commit a2f83e8b0c82c9500421a26c49eb198b25fcdea3 ]

This simple refactoring moves code for modifying the semaphore cow_count
into separate functions to prepare for changes that will extend these
methods to provide for a more sophisticated mechanism for COW
throttling.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

zram: fix race between backing_dev_show and backing_dev_store

[ Upstream commit f7daefe4231e57381d92c2e2ad905a899c28e402 ]

CPU0:        CPU1:
backing_dev_show        backing_dev_store
    ......    ......
    file = zram->backing_dev;
    down_read(&zram->init_lock);    down_read(&zram->init_init_lock)
    file_path(file, ...);    zram->backing_dev = backing_dev;
    up_read(&zram->init_lock);    up_read(&zram->init_lock);

gets the value of zram->backing_dev too early in backing_dev_show, which
resultin the value being NULL at the beginning, and not NULL later.

backtrace:
  d_path+0xcc/0x174
  file_path+0x10/0x18
  backing_dev_show+0x40/0xb4
  dev_attr_show+0x20/0x54
  sysfs_kf_seq_show+0x9c/0x10c
  kernfs_seq_show+0x28/0x30
  seq_read+0x184/0x488
  kernfs_fop_read+0x5c/0x1a4
  __vfs_read+0x44/0x128
  vfs_read+0xa0/0x138
  SyS_read+0x54/0xb4

Link: http://lkml.kernel.org/r/1571046839-16814-1-git-send-email-chenwandun@huawei.com
Signed-off-by: Chenwandun <chenwandun@huawei.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.19.81

RDMA/cxgb4: Do not dma memory off of the stack

commit 3840c5b78803b2b6cc1ff820100a74a092c40cbb upstream.

Nicolas pointed out that the cxgb4 driver is doing dma off of the stack,
which is generally considered a very bad thing.  On some architectures it
could be a security problem, but odds are none of them actually run this
driver, so it's just a "normal" bug.

Resolve this by allocating the memory for a message off of the heap
instead of the stack.  kmalloc() always will give us a proper memory
location that DMA will work correctly from.

Link: https://lore.kernel.org/r/20191001165611.GA3542072@kroah.com
Reported-by: Nicolas Waisman <nico@semmle.com>
Tested-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-rq-qos: fix first node deletion of rq_qos_del()

commit 307f4065b9d7c1e887e8bdfb2487e4638559fea1 upstream.

rq_qos_del() incorrectly assigns the node being deleted to the head if
it was the first on the list in the !prev path.  Fix it by iterating
with ** instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Fixes: a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: PM: Fix pci_power_up()

commit 45144d42f299455911cc29366656c7324a3a7c97 upstream.

There is an arbitrary difference between the system resume and
runtime resume code paths for PCI devices regarding the delay to
apply when switching the devices from D3cold to D0.

Namely, pci_restore_standard_config() used in the runtime resume
code path calls pci_set_power_state() which in turn invokes
__pci_start_power_transition() to power up the device through the
platform firmware and that function applies the transition delay
(as per PCI Express Base Specification Revision 2.0, Section 6.6.1).
However, pci_pm_default_resume_early() used in the system resume
code path calls pci_power_up() which doesn't apply the delay at
all and that causes issues to occur during resume from
suspend-to-idle on some systems where the delay is required.

Since there is no reason for that difference to exist, modify
pci_power_up() to follow pci_set_power_state() more closely and
invoke __pci_start_power_transition() from there to call the
platform firmware to power up the device (in case that's necessary).

Fixes: db288c9c5f9d ("PCI / PM: restore the original behavior of pci_set_power_state()")
Reported-by: Daniel Drake <drake@endlessm.com>
Tested-by: Daniel Drake <drake@endlessm.com>
Link: https://lore.kernel.org/linux-pm/CAD8Lp44TYxrMgPLkHCqF9hv6smEurMXvmmvmtyFhZ6Q4SE+dig@mail.gmail.com/T/#m21be74af263c6a34f36e0fc5c77c5449d9406925
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/netback: fix error path of xenvif_connect_data()

commit 3d5c1a037d37392a6859afbde49be5ba6a70a6b3 upstream.

xenvif_connect_data() calls module_put() in case of error. This is
wrong as there is no related module_get().

Remove the superfluous module_put().

Fixes: 279f438e36c0a7 ("xen-netback: Don't destroy the netdev until the vif is shut down")
Cc: <stable@vger.kernel.org> # 3.12
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: Avoid cpufreq_suspend() deadlock on system shutdown

commit 65650b35133ff20f0c9ef0abd5c3c66dbce3ae57 upstream.

It is incorrect to set the cpufreq syscore shutdown callback pointer
to cpufreq_suspend(), because that function cannot be run in the
syscore stage of system shutdown for two reasons: (a) it may attempt
to carry out actions depending on devices that have already been shut
down at that point and (b) the RCU synchronization carried out by it
may not be able to make progress then.

The latter issue has been present since commit 45975c7d21a1 ("rcu:
Define RCU-sched API in terms of RCU for Tree RCU PREEMPT builds"),
but the former one has been there since commit 90de2a4aa9f3 ("cpufreq:
suspend cpufreq governors on shutdown") regardless.

Fix that by dropping cpufreq_syscore_ops altogether and making
device_shutdown() call cpufreq_suspend() directly before shutting
down devices, which is along the lines of what system-wide power
management does.

Fixes: 45975c7d21a1 ("rcu: Define RCU-sched API in terms of RCU for Tree RCU PREEMPT builds")
Fixes: 90de2a4aa9f3 ("cpufreq: suspend cpufreq governors on shutdown")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.0+ <stable@vger.kernel.org> # 4.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memstick: jmb38x_ms: Fix an error handling path in 'jmb38x_ms_probe()'

commit 28c9fac09ab0147158db0baeec630407a5e9b892 upstream.

If 'jmb38x_ms_count_slots()' returns 0, we must undo the previous
'pci_request_regions()' call.

Goto 'err_out_int' to fix it.

Fixes: 60fdd931d577 ("memstick: add support for JMicron jmb38x MemoryStick host controller")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: tracepoints: Fix bad entry members of qgroup events

commit 1b2442b4ae0f234daeadd90e153b466332c466d8 upstream.

[BUG]
For btrfs:qgroup_meta_reserve event, the trace event can output garbage:

  qgroup_meta_reserve: 9c7f6acc-b342-4037-bc47-7f6e4d2232d7: refroot=5(FS_TREE) type=DATA diff=2
  qgroup_meta_reserve: 9c7f6acc-b342-4037-bc47-7f6e4d2232d7: refroot=5(FS_TREE) type=0x258792 diff=2

The @type can be completely garbage, as DATA type is not possible for
trace_qgroup_meta_reserve() trace event.

[CAUSE]
Ther are several problems related to qgroup trace events:
- Unassigned entry member
  Member entry::type of trace_qgroup_update_reserve() and
  trace_qgourp_meta_reserve() is not assigned

- Redundant entry member
  Member entry::type is completely useless in
  trace_qgroup_meta_convert()

Fixes: 4ee0d8832c2e ("btrfs: qgroup: Update trace events for metadata reservation")
CC: stable@vger.kernel.org # 4.10+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: check for the full sync flag while holding the inode lock during fsync

commit ba0b084ac309283db6e329785c1dc4f45fdbd379 upstream.

We were checking for the full fsync flag in the inode before locking the
inode, which is racy, since at that that time it might not be set but
after we acquire the inode lock some other task set it. One case where
this can happen is on a system low on memory and some concurrent task
failed to allocate an extent map and therefore set the full sync flag on
the inode, to force the next fsync to work in full mode.

A consequence of missing the full fsync flag set is hitting the problems
fixed by commit 0c713cbab620 ("Btrfs: fix race between ranged fsync and
writeback of adjacent ranges"), BUG_ON() when dropping extents from a log
tree, hitting assertion failures at tree-log.c:copy_items() or all sorts
of weird inconsistencies after replaying a log due to file extents items
representing ranges that overlap.

So just move the check such that it's done after locking the inode and
before starting writeback again.

Fixes: 0c713cbab620 ("Btrfs: fix race between ranged fsync and writeback of adjacent ranges")
CC: stable@vger.kernel.org # 5.2+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: add missing extents release on file extent cluster relocation error

commit 44db1216efe37bf670f8d1019cdc41658d84baf5 upstream.

If we error out when finding a page at relocate_file_extent_cluster(), we
need to release the outstanding extents counter on the relocation inode,
set by the previous call to btrfs_delalloc_reserve_metadata(), otherwise
the inode's block reserve size can never decrease to zero and metadata
space is leaked. Therefore add a call to btrfs_delalloc_release_extents()
in case we can't find the target page.

Fixes: 8b62f87bad9c ("Btrfs: rework outstanding_extents")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: block-group: Fix a memory leak due to missing btrfs_put_block_group()

commit 4b654acdae850f48b8250b9a578a4eaa518c7a6f upstream.

In btrfs_read_block_groups(), if we have an invalid block group which
has mixed type (DATA|METADATA) while the fs doesn't have MIXED_GROUPS
feature, we error out without freeing the block group cache.

This patch will add the missing btrfs_put_block_group() to prevent
memory leak.

Note for stable backports: the file to patch in versions <= 5.3 is
fs/btrfs/extent-tree.c

Fixes: 49303381f19a ("Btrfs: bail out if block group has different mixed flag")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: armada-37xx: swap polarity on LED group

commit b835d6953009dc350d61402a854b5a7178d8c615 upstream.

The configuration registers for the LED group have inverted
polarity, which puts the GPIO into open-drain state when used in
GPIO mode.  Switch to '0' for GPIO and '1' for LED modes.

Fixes: 87466ccd9401 ("pinctrl: armada-37xx: Add pin controller support for Armada 37xx")
Signed-off-by: Patrick Williams <alpawi@amazon.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191001155154.99710-1-alpawi@amazon.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: armada-37xx: fix control of pins 32 and up

commit 20504fa1d2ffd5d03cdd9dc9c9dd4ed4579b97ef upstream.

The 37xx configuration registers are only 32 bits long, so
pins 32-35 spill over into the next register.  The calculation
for the register address was done, but the bitmask was not, so
any configuration to pin 32 or above resulted in a bitmask that
overflowed and performed no action.

Fix the register / offset calculation to also adjust the offset.

Fixes: 5715092a458c ("pinctrl: armada-37xx: Add gpio support")
Signed-off-by: Patrick Williams <alpawi@amazon.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191001154634.96165-1-alpawi@amazon.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: cherryview: restore Strago DMI workaround for all versions

commit 260996c30f4f3a732f45045e3e0efe27017615e4 upstream.

This is essentially a revert of:

e3f72b749da2 pinctrl: cherryview: fix Strago DMI workaround
86c5dd6860a6 pinctrl: cherryview: limit Strago DMI workarounds to version 1.0

because even with 1.1 versions of BIOS there are some pins that are
configured as interrupts but not claimed by any driver, and they
sometimes fire up and result in interrupt storms that cause touchpad
stop functioning and other issues.

Given that we are unlikely to qualify another firmware version for a
while it is better to keep the workaround active on all Strago boards.

Reported-by: Alex Levin <levinale@chromium.org>
Fixes: 86c5dd6860a6 ("pinctrl: cherryview: limit Strago DMI workarounds to version 1.0")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Alex Levin <levinale@chromium.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/apic/x2apic: Fix a NULL pointer deref when handling a dying cpu

commit 7a22e03b0c02988e91003c505b34d752a51de344 upstream.

Check that the per-cpu cluster mask pointer has been set prior to
clearing a dying cpu's bit.  The per-cpu pointer is not set until the
target cpu reaches smp_callin() during CPUHP_BRINGUP_CPU, whereas the
teardown function, x2apic_dead_cpu(), is associated with the earlier
CPUHP_X2APIC_PREPARE.  If an error occurs before the cpu is awakened,
e.g. if do_boot_cpu() itself fails, x2apic_dead_cpu() will dereference
the NULL pointer and cause a panic.

  smpboot: do_boot_cpu failed(-22) to wakeup CPU#1
  BUG: kernel NULL pointer dereference, address: 0000000000000008
  RIP: 0010:x2apic_dead_cpu+0x1a/0x30
  Call Trace:
   cpuhp_invoke_callback+0x9a/0x580
   _cpu_up+0x10d/0x140
   do_cpu_up+0x69/0xb0
   smp_init+0x63/0xa9
   kernel_init_freeable+0xd7/0x229
   ? rest_init+0xa0/0xa0
   kernel_init+0xa/0x100
   ret_from_fork+0x35/0x40

Fixes: 023a611748fd5 ("x86/apic/x2apic: Simplify cluster management")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20191001205019.5789-1-sean.j.christopherson@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/boot/64: Make level2_kernel_pgt pages invalid outside kernel area

commit 2aa85f246c181b1fa89f27e8e20c5636426be624 upstream.

Our hardware (UV aka Superdome Flex) has address ranges marked
reserved by the BIOS. Access to these ranges is caught as an error,
causing the BIOS to halt the system.

Initial page tables mapped a large range of physical addresses that
were not checked against the list of BIOS reserved addresses, and
sometimes included reserved addresses in part of the mapped range.
Including the reserved range in the map allowed processor speculative
accesses to the reserved range, triggering a BIOS halt.

Used early in booting, the page table level2_kernel_pgt addresses 1
GiB divided into 2 MiB pages, and it was set up to linearly map a full
 1 GiB of physical addresses that included the physical address range
of the kernel image, as chosen by KASLR.  But this also included a
large range of unused addresses on either side of the kernel image.
And unlike the kernel image's physical address range, this extra
mapped space was not checked against the BIOS tables of usable RAM
addresses.  So there were times when the addresses chosen by KASLR
would result in processor accessible mappings of BIOS reserved
physical addresses.

The kernel code did not directly access any of this extra mapped
space, but having it mapped allowed the processor to issue speculative
accesses into reserved memory, causing system halts.

This was encountered somewhat rarely on a normal system boot, and much
more often when starting the crash kernel if "crashkernel=512M,high"
was specified on the command line (this heavily restricts the physical
address of the crash kernel, in our case usually within 1 GiB of
reserved space).

The solution is to invalidate the pages of this table outside the kernel
image's space before the page table is activated. It fixes this problem
on our hardware.

 [ bp: Touchups. ]

Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: dimitri.sivanich@hpe.com
Cc: Feng Tang <feng.tang@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jordan Borgner <mail@jordan-borgner.de>
Cc: Juergen Gross <jgross@suse.com>
Cc: mike.travis@hpe.com
Cc: russ.anderson@hpe.com
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Link: https://lkml.kernel.org/r/9c011ee51b081534a7a15065b1681d200298b530.1569358539.git.steve.wahl@hpe.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache: fix bugs when a GFP_NOWAIT allocation fails

commit 13bd677a472d534bf100bab2713efc3f9e3f5978 upstream.

GFP_NOWAIT allocation can fail anytime - it doesn't wait for memory being
available and it fails if the mempool is exhausted and there is not enough
memory.

If we go down this path:
  map_bio -> mg_start -> alloc_migration -> mempool_alloc(GFP_NOWAIT)
we can see that map_bio() doesn't check the return value of mg_start(),
and the bio is leaked.

If we go down this path:
  map_bio -> mg_start -> mg_lock_writes -> alloc_prison_cell ->
  dm_bio_prison_alloc_cell_v2 -> mempool_alloc(GFP_NOWAIT) ->
  mg_lock_writes -> mg_complete
the bio is ended with an error - it is unacceptable because it could
cause filesystem corruption if the machine ran out of memory
temporarily.

Change GFP_NOWAIT to GFP_NOIO, so that the mempool code will properly
wait until memory becomes available. mempool_alloc with GFP_NOIO can't
fail, so remove the code paths that deal with allocation failure.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>