staging: rtl8192e: Rename NicIFDisableNIC

Use naming schema found in other rtlwifi devices.
Rename NicIFDisableNIC to rtl92e_disable_nic.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename MgntActSet_RF_State

Use naming schema found in other rtlwifi devices.
Rename MgntActSet_RF_State to rtl92e_set_rf_state.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename check_rfctrl_gpio_timer

Use naming schema found in other rtlwifi devices.
Rename check_rfctrl_gpio_timer to rtl92e_check_rfctrl_gpio_timer.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename set_swcam

Use naming schema found in other rtlwifi devices.
Rename set_swcam to rtl92e_set_swcam.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename setKey

Use naming schema found in other rtlwifi devices.
Rename setKey to rtl92e_set_key.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename EnableHWSecurityConfig8192

Use naming schema found in other rtlwifi devices.
Rename EnableHWSecurityConfig8192 to rtl92e_enable_hw_security_config.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename CamRestoreAllEntry

Use naming schema found in other rtlwifi devices.
Rename CamRestoreAllEntry to rtl92e_cam_restore.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename CamResetAllEntry

Use naming schema found in other rtlwifi devices.
Rename CamResetAllEntry to rtl92e_cam_reset.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename SetRFPowerState

Use naming schema found in other rtlwifi devices.
Rename SetRFPowerState to rtl92e_set_rf_power_state.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_SetBWMode

Use naming schema found in other rtlwifi devices.
Rename rtl8192_SetBWMode to rtl92e_set_bw_mode.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_setBBreg

Use naming schema found in other rtlwifi devices.
Rename rtl8192_setBBreg to rtl92e_set_bb_reg.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_QueryBBReg

Use naming schema found in other rtlwifi devices.
Rename rtl8192_QueryBBReg to rtl92e_get_bb_reg.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_phy_SwChnl

Use naming schema found in other rtlwifi devices.
Rename rtl8192_phy_SwChnl to rtl92e_set_channel.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_phy_setTxPower

Use naming schema found in other rtlwifi devices.
Rename rtl8192_phy_setTxPower to rtl92e_set_tx_power.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_phy_SetRFReg

Use naming schema found in other rtlwifi devices.
Rename rtl8192_phy_SetRFReg to rtl92e_set_rf_reg.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_phy_RFConfig

Use naming schema found in other rtlwifi devices.
Rename rtl8192_phy_RFConfig to rtl92e_config_phy.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_phy_QueryRFReg

Use naming schema found in other rtlwifi devices.
Rename rtl8192_phy_QueryRFReg to rtl92e_get_rf_reg.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_phy_getTxPower

Use naming schema found in other rtlwifi devices.
Rename rtl8192_phy_getTxPower to rtl92e_get_tx_power.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_phy_ConfigRFWithHeaderFile

Use naming schema found in other rtlwifi devices.
Rename rtl8192_phy_ConfigRFWithHeaderFile to rtl92e_config_rf_path.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_phy_configmac

Use naming schema found in other rtlwifi devices.
Rename rtl8192_phy_configmac to rtl92e_config_mac.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_phy_CheckIsLegalRFPath

Use naming schema found in other rtlwifi devices.
Rename rtl8192_phy_CheckIsLegalRFPath to rtl92e_is_legal_rf_path.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_phy_checkBBAndRF

Use naming schema found in other rtlwifi devices.
Rename rtl8192_phy_checkBBAndRF to rtl92e_check_bb_and_rf.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_BBConfig

Use naming schema found in other rtlwifi devices.
Rename rtl8192_BBConfig to rtl92e_config_bb.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename PHY_SetRtl8192eRfOff

Use naming schema found in other rtlwifi devices.
Rename PHY_SetRtl8192eRfOff to rtl92e_set_rf_off.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename PHY_ScanOperationBackup8192

Use naming schema found in other rtlwifi devices.
Rename PHY_ScanOperationBackup8192 to rtl92e_scan_op_backup.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename InitialGain819xPci

Use naming schema found in other rtlwifi devices.
Rename InitialGain819xPci to rtl92e_init_gain.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename firmware_init_param

Use naming schema found in other rtlwifi devices.
Rename firmware_init_param to rtl92e_init_fw_param.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_update_ratr_table

Use naming schema found in other rtlwifi devices.
Rename rtl8192_update_ratr_table to rtl92e_update_ratr_table.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_tx_fill_desc

Use naming schema found in other rtlwifi devices.
Rename rtl8192_tx_fill_desc to rtl92e_fill_tx_desc.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_tx_fill_cmd_desc

Use naming schema found in other rtlwifi devices.
Rename rtl8192_tx_fill_cmd_desc to rtl92e_fill_tx_cmd_desc.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_rx_query_status_desc

Use naming schema found in other rtlwifi devices.
Rename rtl8192_rx_query_status_desc to rtl92e_get_rx_stats.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_link_change

Use naming schema found in other rtlwifi devices.
Rename rtl8192_link_change to rtl92e_link_change.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_interrupt_recognized

Use naming schema found in other rtlwifi devices.
Rename rtl8192_interrupt_recognized to rtl92e_ack_irq.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_InitializeVariables

Use naming schema found in other rtlwifi devices.
Rename rtl8192_InitializeVariables to rtl92e_init_variables.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_HalTxCheckStuck

Use naming schema found in other rtlwifi devices.
Rename rtl8192_HalTxCheckStuck to rtl92e_is_tx_stuck.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_halt_adapter

Use naming schema found in other rtlwifi devices.
Rename rtl8192_halt_adapter to rtl92e_stop_adapter.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_HalRxCheckStuck

Use naming schema found in other rtlwifi devices.
Rename rtl8192_HalRxCheckStuck to rtl92e_is_rx_stuck.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_GetNmodeSupportBySecCfg

Use naming schema found in other rtlwifi devices.
Rename rtl8192_GetNmodeSupportBySecCfg to rtl92e_get_nmode_support_by_sec.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_GetHalfNmodeSupportByAPs

Use naming schema found in other rtlwifi devices.
Rename rtl8192_GetHalfNmodeSupportByAPs to rtl92e_is_halfn_supported_by_ap.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_get_eeprom_size

Use naming schema found in other rtlwifi devices.
Rename rtl8192_get_eeprom_size to rtl92e_get_eeprom_size.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192e_start_beacon

Use naming schema found in other rtlwifi devices.
Rename rtl8192e_start_beacon to rtl92e_start_beacon.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192e_SetHwReg

Use naming schema found in other rtlwifi devices.
Rename rtl8192e_SetHwReg to rtl92e_set_reg.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_enable_tx

Use naming schema found in other rtlwifi devices.
Rename rtl8192_enable_tx to rtl92e_enable_tx.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_enable_rx

Use naming schema found in other rtlwifi devices.
Rename rtl8192_enable_rx to rtl92e_enable_rx.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_EnableInterrupt

Use naming schema found in other rtlwifi devices.
Rename rtl8192_EnableInterrupt to rtl92e_enable_irq.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_DisableInterrupt

Use naming schema found in other rtlwifi devices.
Rename rtl8192_DisableInterrupt to rtl92e_disable_irq.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_ClearInterrupt

Use naming schema found in other rtlwifi devices.
Rename rtl8192_ClearInterrupt to rtl92e_clear_irq.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_AllowAllDestAddr

Use naming schema found in other rtlwifi devices.
Rename rtl8192_AllowAllDestAddr to rtl92e_set_monitor_mode.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_adapter_start

Use naming schema found in other rtlwifi devices.
Rename rtl8192_adapter_start to rtl92e_start_adapter.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename cmpk_message_handle_tx

Use naming schema found in other rtlwifi devices.
Rename cmpk_message_handle_tx to rtl92e_send_cmd_pkt.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename PHY_SetRF8256OFDMTxPower

Use naming schema found in other rtlwifi devices.
Rename PHY_SetRF8256OFDMTxPower to rtl92e_set_ofdm_tx_power.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename PHY_SetRF8256CCKTxPower

Use naming schema found in other rtlwifi devices.
Rename PHY_SetRF8256CCKTxPower to rtl92e_set_cck_tx_power.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename PHY_SetRF8256Bandwidth

Use naming schema found in other rtlwifi devices.
Rename PHY_SetRF8256Bandwidth to rtl92e_set_bandwidth.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename PHY_RF8256_Config

Use naming schema found in other rtlwifi devices.
Rename PHY_RF8256_Config to rtl92e_config_rf.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove bogus error checking

The netdev we're testing for can't be removed, because its never
unregistered, so don't bother checking for it

Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove visornic_ioctl

All it does is return no supported.  Removing the function entirely
accomplishes the same thing

Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Remove trans_start

dev_trans_start does this for us now

Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Fix improper use of NETDEV_TX_BUSY

Using NETDEV_TX_BUSY is tricky.  Its meant for situations where the error
in question is transient and quickly resolved.  But the driver rarely is
able to know that to a certainty.  And in the case of visornic, it just
uses it without any care for that, in the hopes that it won't loose frames,
even if the problem is that the skb is somehow malformed for the hardware.
If we get one of those kinds of skbs, NETDEV_TX_BUSY will just cause us to
spin, processing the same error over and over.

Fix it by dropping the frame, stopping the queue where appropriate, and
returning NETDEV_TX_OK

Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Remove some extraneous start/stop queue operations

If we put them in the enable and disable paths, we don't need them in
several other places

Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Change enable/disable to wait forever

I don't see why the server should stop responding, or that we should just
give up if it does.  Wait forever when enabling/disabling the visornic

Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Make serverdown synchronous

I don't see why serverdown should be async on a workqueue.  Just make it
synchronous, and remove some code in the process

Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: simplify visornic_serverdown_complete

Theres a lot of code duplication going on in visornic_serverdown_complete.
We should just be able to send it through the dev_close path and have it
do the right things.

Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Guard against task leakage

Its possible to overwrite the old task pointer in visornic_resume.  Add a
check to guard against that and a warning if we find that its already
running

Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Clean up kthread usage

Remove the has_stopped completion as theres already one available
internally.

Correct the while loops

Remove the while loop in drain_queue as it already exists in the top level
loop

Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Linarize skbs

If we can't fit an skb into a frag array, linaraize it so we don't have to

Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: BUG halt on error in I/O channel

We precheck that we have enough space in an iochannel prior to writing to
it when we send in a fragmented skb.  Given that there is no recovery from
this condition that I can see, turn it into a BUG halt

Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Check return code properly on visor_copy_fragsinfo_from_skb

One call site for visor_copy_fragsinfo_from_skb was checking for an rc of
-1, but thhe function doesn't return that, it returns -errno.  Correct it

Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Remove num_visornic_open array

As pointed out in a recent review, the num_visornic_open array didn't do
anything useful, and it exposed a potential race in the visornic code that
could arise while taking down a net interface while reading from the
debugfs files. Fix that by removing the array entirely, and just iterating
over all the registered netdevs in a given namespace, filtering on them
having visornic ops (to identify which are ours), and having their queues
not be stopped (identifying that they are up). This should prevent any oops
conditions happening due to changing state in that array, and save us a
bunch of code too.

Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: fix incorrect type in assignment warning

Repaced calls to htons and memcpy with a single call to put_unaligned_be16
to fix the following sparse warning:
drivers/staging/rtl8723au/core/rtw_recv.c:1557:21: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8723au/core/rtw_recv.c:1557:21:    expected unsigned short [unsigned] [assigned] [usertype] len
drivers/staging/rtl8723au/core/rtw_recv.c:1557:21:    got restricted __be16 [usertype] <noident>

Signed-off-by: Steve Pennington <sgpenn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ion: ion_cma_heap: Don't directly use dma_common_get_sgtable

Use dma_get_sgtable rather than dma_common_get_sgtable so a device's
dma_ops aren't bypassed. This is essential in situations where a device
uses an IOMMU and the physical memory is not contiguous (as the common
function assumes).

Signed-off-by: Jon Medhurst <tixy@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: update TODO list

update TODO list to provide more detail on remaining work

Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192e: pointer math bug in rtllib_rx_DELBA()

The pointer math here was totally wrong so we were reading nonsense
information from beyond the end of the buffer.  It could lead to an oops
if that memory wasn't mapped.

The "pReasonCode" pointer is assigned but never used so I deleted it.

With-Fix-From: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Tested-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove unneeded bool

bool Reval is set to match the value of bHalfWirelessN24GMode just to
this. The value can be returned directly. Removing uneeded bool.

Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Suggested-by: Joe Perches <joe@perches.com>
Suggested-by: Franks Klaver <fransklaver@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove bool comparisons

Remove explicit true/false comparisons to bool variables.

Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: pointer math bug in ieee80211_rx_DELBA()

Smatch complains because "delba" is a pointer to struct
rtl_80211_hdr_3addr so the "delba += sizeof(struct rtl_80211_hdr_3addr);"
is clearly wrong.  We are reading nonsense data from beyond the end of
the buffer and could oops if that memory isn't mapped.

It turns out the next two statements are also wrong. We should delete
the += sizeof() statement and "delba+2" should be "&delba->payload[2]".
"pReasonCode" isn't used so I deleted that.

With-Fix-From: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove multiple blank line

Multiple blank lines should be avoided.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: dont mix success and error path

Success and error path was mixed. Separate them by directly returning 0
from the success path. In the process remove the variable which became
unused.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: check for kzalloc failure

Check for kzalloc failure and directly return from the error patch thus
simplifying the success path.

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove label

Directly return NULL instead of using another label and goto.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove unused define

_HCI_INTF_C_ was only defined here but not being used anywhere.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: ddk750_power.c: Split lines over 80 characters.

Fix up "line over 80 characters" warning found by the checkpatch.pl script.

Signed-off-by: Antoine BLIN <antoine.blin@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: removed extra parentheses

fixed checkpatch.pl error:
ERROR: return is not a function, parentheses are not needed

Signed-off-by: Aaron Ouellette <aouellette2016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/comedi/drivers/usbduxsigma.c: added support for ehci drivers

urb->interval is deprecated and thus I've changed the driver
that it now always assumes interval=1 which means every frame
in USB 1.1 and every uframe in USB 2.0. However we still need
to have different sampling rates which are still multiples
of the interval which is now transmitted to the firmware.
The firmware transmits either zero length packets or none every (u)frame.
This is checked in the completion handler and any packet
at zero length is discarded so that comedi again sees the data
coming in at the interval specified. This also then gives the ADC
the necessary time to convert. For example 16 channels require
about 700us and in this period no packet could be transmitted.
In this case this is padded up to 1ms so that we have then 7 zero
length packets and one packet with the ADC data.

Signed-off-by: Bernd Porr <mail@berndporr.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/comedi/drivers/usbduxsigma.c: updated address details

Changed my e-mail address to mail@berndporr.me.uk. The old one
is no longer used.

Signed-off-by: Bernd Porr <mail@berndporr.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: drivers: pcl816.c remove leading space

Checkpatch.pl warning - suspect code indent for conditional statements -
is corrected

Signed-off-by: Chandra S Gorentla <csgorentla@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: desc.h remove dead strctures

Remove these unsed structures.
typedef struct tagSTxSyncDesc
typedef struct tagSRrvTime_atim
typedef struct tagSTxBufHead
typedef struct tagSBEACONCtl
typedef struct tagSSecretKey
typedef struct tagSKeyEntry

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: s_cbFillTxBufHead replace STxBufHead

vnt_tx_fifo_head has now replaced STxBufHead

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: always set 32 bit dma mask

The device is limited to 32 bit address space.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: fix tagTDES1 -> wReqCount type

should be __le16

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Fix wReqCount to __le16

Should be __le16 and do and correct endian conversion.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: fix tagSRxDesc -> next_desc type

Should always be __le32

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Fix tagSRxDesc -> buff_addr type

Should always be __le32.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: remove unused tagDEVICE_RD_INFO -> curr_desc

variable is assigned a value that is never used.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: fix tagSTxDesc -> next_desc type

Should always be __le32 type

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: fix tagDEVICE_TD_INFO -> buff_addr type

Should always be __le32 type

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Remove unused tagDEVICE_TD_INFO curr_desc

The variable is assigned a value that is never used.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: remove unnecessary variable skb_dma

skb_dma flips from 0 to the contents buf_dma.

This is nolonger necessary so use buf_dma directly
and remove skb_dma altogether.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: dead code tx path remove dma_unmap_single

When pTDInfo->skb_dma not equal to pTDInfo->buf_dma, pTDInfo->skb_dma
equals zero.

as mentioned in comment pre-allocated buf_dma can't be unmapped
so remove dead code.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: remove unused DBG_PORT80 and VIAWET_DEBUG

VIAWET_DEBUG is never defined so DBG_PORT80 is empty and never used.

Remove both macros.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Remove ununsed macro ASSERT

VIAWET_DEBUG is not defined so macro is empty.

Remove the macro.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>