Cary Coutant [Fri, 17 Oct 2014 23:22:55 +0000 (16:22 -0700)]
Add "typename" keyword to satisfy GCC 4.2.
gold/
* aarch64.cc (AArch64_relocate_functions::maybe_apply_stub):
Add "typename" keyword.
Alan Modra [Fri, 17 Oct 2014 23:00:32 +0000 (09:30 +1030)]
daily update
Jose E. Marchesi [Wed, 15 Oct 2014 06:46:54 +0000 (08:46 +0200)]
opcodes, elf: annotate instructions with HWCAP2_VIS3B.
This patch annotates the following SPARC instructions as VIS3B
instructions: ldx *, %efsr, fpadd64, fpsub64, fpcmpule8, fpcmpune8,
fpcmpugt8, fpcmpueq8. It also improves the documentation of the VIS3B
capability in several headers.
Tested in sparc64-unknown-linux-gnu and sparc-unknown-linux-gnu.
No visible regressions.
opcodes/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (sparc-opcodes): Annotate several instructions with
the HWCAP2_VIS3B hwcap.
include/opcodes/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc.h (HWCAP2_VIS3B): Documentation improved.
include/elf/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc.h (ELF_SPARC_HWCAP2_VIS3B): Documentation improved.
Jose E. Marchesi [Fri, 17 Oct 2014 19:56:41 +0000 (21:56 +0200)]
opcodes: fix several misplaced hwcap entries.
This patch fixes the hwcap entries in `sparc-opcodes' (which were
incorrectly located in the flags field) for the following
instructions:
wr r,r,%sys_tick
wr r,i,%sys_tick
wr r,r,%sys_tick_cmpr
wr r,i,%sys_tick_cmpr
edge8n edge8ln edge16n edge16ln edge32n edge32ln
bmask bshuffle siam
Tested in sparc-unknown-linux-gnu and sparc64-unknown-linux-gnu.
No visible regressions.
opcodes/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (sparc-opcodes): Fix several misplaced hwcap
entries.
Matthew Fortune [Fri, 17 Oct 2014 19:25:09 +0000 (20:25 +0100)]
Fix bad @value references in MIPS documentation
gas/
* doc/c-mips.texi: Fix bad @value references.
Doug Evans [Fri, 17 Oct 2014 18:12:17 +0000 (11:12 -0700)]
New python event "clear_objfiles".
If one is watching new_objfile events in python, it helps to know
when the list of objfiles is cleared. This patch adds a new
clear_objfiles event to support this.
This patch is all just cut-n-paste-n-tweak derived from
the new_objfiles event.
gdb/ChangeLog:
* NEWS: Mention new event gdb.clear_objfiles.
* python/py-event.h (emit_clear_objfiles_event): Clear
* python/py-events.h (events_object): New member clear_objfiles.
* python/py-evts.c (gdbpy_initialize_py_events): Add clear_objfiles
event.
* python/py-inferior.c (python_new_objfile): If objfile is NULL,
emit clear_objfiles event.
* python/py-newobjfileevent.c (create_clear_objfiles_event_object): New
function.
(emit_clear_objfiles_event): New function.
(clear_objfiles): New event.
* python/python-internal.h (gdbpy_initialize_clear_objfiles_event):
Declare.
* python/python.c (_initialize_python): Call
gdbpy_initialize_clear_objfiles_event.
gdb/doc/ChangeLog:
* python.texi (Events In Python): Document clear_objfiles event.
gdb/testsuite/ChangeLog:
* gdb.python/py-events.exp: Update expected output for clear_objfiles
event.
* gdb.python/py-events.py: Add clear_objfiles event.
Doug Evans [Fri, 17 Oct 2014 17:57:26 +0000 (10:57 -0700)]
Add gdb.Objfile.progspace attribute.
gdb/ChangeLog:
* NEWS: Mention new gdb.Objfile.progspace attribute.
* python/py-objfile.c (objfpy_get_progspace): New function.
(objfile_getset): New entry for "progspace".
gdb/doc/ChangeLog:
* python.texi (Objfiles In Python): Document new progspace attribute.
gdb/testsuite/ChangeLog:
* gdb.python/py-objfile.exp: Test progspace attribute.
Luis Machado [Fri, 17 Oct 2014 14:28:17 +0000 (11:28 -0300)]
Fix mingw32 failures due to incorrect directory separator in pattern
Some testcases, mostly gdb.reverse ones, assume the presence of a
'/' directory separator before the source file name. This is
incorrect for mingw32 hosts, generating false failures for those
tests.
I attempted to catch most of the occurrences of the pattern
".*/$srcfile" and replaced them with ".*$srcfile". The latter
is used elsewhere in the testsuite. The resulting patch is attached.
I also see other occurrences of the same assumption throughout the
testsuite, but usually they are arguments for function calls and i
seem to recall either the test harness or GDB deals with those
paths properly.
gdb/testsuite:
2014-10-17 Luis Machado <lgustavo@codesourcery.com>
* gdb.guile/scm-breakpoint.exp: Do not assume any
directory separators when matching source file paths.
* gdb.python/py-breakpoint.exp: Likewise.
* gdb.reverse/break-precsave.exp: Likewise.
* gdb.reverse/break-reverse.exp: Likewise.
* gdb.reverse/consecutive-precsave.exp: Likewise.
* gdb.reverse/finish-precsave.exp: Likewise.
* gdb.reverse/finish-reverse-bkpt.exp: Likewise.
* gdb.reverse/finish-reverse.exp: Likewise.
* gdb.reverse/i386-precsave.exp: Likewise.
* gdb.reverse/i387-env-reverse.exp: Likewise.
* gdb.reverse/i387-stack-reverse.exp: Likewise.
* gdb.reverse/machinestate-precsave.exp: Likewise.
* gdb.reverse/machinestate.exp: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/solib-precsave.exp: Likewise.
* gdb.reverse/step-precsave.exp: Likewise.
* gdb.reverse/until-precsave.exp: Likewise.
* gdb.reverse/watch-precsave.exp: Likewise.
* gdb.reverse/watch-reverse.exp: Likewise.
Yao Qi [Fri, 15 Aug 2014 03:28:39 +0000 (11:28 +0800)]
Copy xml files to host
When I run test with board file local-remote-host-native.exp, I see
the following warning,
$ make check RUNTESTFLAGS="--host_board=local-remote-host-native
--target_board=local-remote-host-native tdesc-arch.exp
HOST_DIR=/tmp/foo/"
(gdb) set tdesc filename ../../../../git/gdb/testsuite/gdb.xml/trivial.xml^M
warning: Could not open "../../../../git/gdb/testsuite/gdb.xml/trivial.xml"
(gdb) quit^
because "${srcdir}/gdb.xml/trivial.xml" doesn't exist on host. This
patch is to copy trivial.xml to host and the warning goes away.
(gdb) set tdesc filename /tmp/foo/trivial.xml^M
(gdb) quit^
tdesc-regs.exp has the similar problem that single-reg.xml may not
exist on host at all, and it should be copied to host too.
gdb/testsuite:
2014-10-17 Yao Qi <yao@codesourcery.com>
* lib/gdb.exp (gdb_skip_xml_test): Copy trivial.xml to host.
* gdb.xml/tdesc-regs.exp: Copy single-reg.xml to host.
Pedro Alves [Fri, 17 Oct 2014 12:31:26 +0000 (13:31 +0100)]
PR gdb/17471: Repeating a background command makes it foreground
When we repeat a command, by just pressing <ret>, the input from the
previous command is reused for the new command invocation.
When an execution command strips the "&" out of its incoming argument
string, to detect background execution, we poke a '\0' directly to the
incoming argument string.
Combine both, and a repeat of a background command loses the "&".
This is actually only visible if args other than "&" are specified
(e.g., "c 1&" or "next 2&" or "c -a&"), as in the special case of "&"
alone (e.g. "c&") doesn't actually clobber the incoming string.
Fix this by making strip_bg_char return a new string instead of poking
a hole in the input string.
New test included.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17471
* infcmd.c (strip_bg_char): Change prototype and rewrite. Now
returns a copy of the input.
(run_command_1, continue_command, step_1, jump_command)
(signal_command, until_command, advance_command, finish_command)
(attach_command): Adjust and install a cleanup to free the
stripped args.
gdb/testsuite/
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17471
* gdb.base/bg-execution-repeat.c: New file.
* gdb.base/bg-execution-repeat.exp: New file.
Pedro Alves [Fri, 17 Oct 2014 12:31:25 +0000 (13:31 +0100)]
PR gdb/17300: Input after "c -a" crashes readline/GDB
If all threads in the target were already running when the user does
"c -a", nothing puts the inferior's terminal settings in effect and
removes stdin from the event loop, which we must when running a
foreground command. The result is that user input afterwards crashes
readline/gdb:
(gdb) start
Temporary breakpoint 1 at 0x4005d4: file continue-all-already-running.c, line 23.
Starting program: continue-all-already-running
Temporary breakpoint 1, main () at continue-all-already-running.c:23
23 sleep (10);
(gdb) c -a&
Continuing.
(gdb) c -a
Continuing.
p 1
readline: readline_callback_read_char() called with no handler!
Aborted (core dumped)
$
Backtrace:
Program received signal SIGABRT, Aborted.
0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
56 return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig);
(top-gdb) p 1
$1 = 1
(top-gdb) bt
#0 0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
#1 0x0000003b36a36f68 in __GI_abort () at abort.c:89
#2 0x0000000000784aa9 in rl_callback_read_char () at readline/callback.c:116
#3 0x0000000000619181 in rl_callback_read_char_wrapper (client_data=0x0) at gdb/event-top.c:167
#4 0x0000000000619557 in stdin_event_handler (error=0, client_data=0x0) at gdb/event-top.c:373
#5 0x000000000061814a in handle_file_event (data=...) at gdb/event-loop.c:763
#6 0x0000000000617631 in process_event () at gdb/event-loop.c:340
#7 0x00000000006176f8 in gdb_do_one_event () at gdb/event-loop.c:404
#8 0x0000000000617748 in start_event_loop () at gdb/event-loop.c:429
#9 0x00000000006191b3 in cli_command_loop (data=0x0) at gdb/event-top.c:182
#10 0x000000000060f538 in current_interp_command_loop () at gdb/interps.c:318
#11 0x0000000000610701 in captured_command_loop (data=0x0) at gdb/main.c:323
#12 0x000000000060c3f5 in catch_errors (func=0x6106e6 <captured_command_loop>, func_args=0x0, errstring=0x9002c1 "", mask=RETURN_MASK_ALL)
at gdb/exceptions.c:237
#13 0x0000000000611bff in captured_main (data=0x7fffffffd780) at gdb/main.c:1151
#14 0x000000000060c3f5 in catch_errors (func=0x610afe <captured_main>, func_args=0x7fffffffd780, errstring=0x9002c1 "", mask=RETURN_MASK_ALL)
at gdb/exceptions.c:237
#15 0x0000000000611c28 in gdb_main (args=0x7fffffffd780) at gdb/main.c:1159
#16 0x000000000045ef97 in main (argc=5, argv=0x7fffffffd888) at gdb/gdb.c:32
(top-gdb)
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17300
* infcmd.c (continue_1): If continuing all threads in the
foreground, make sure the inferior's terminal settings are put in
effect.
gdb/testsuite/
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17300
* gdb.base/continue-all-already-running.c: New file.
* gdb.base/continue-all-already-running.exp: New file.
Pedro Alves [Fri, 17 Oct 2014 12:31:25 +0000 (13:31 +0100)]
PR gdb/17472: With annotations, input while executing in the foreground crashes readline/GDB
Jan caught an intermittent GDB crash with the annota1.exp test:
Starting program: .../gdb/testsuite/gdb.base/annota1 ^M
[...]
FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout)
[...]
readline: readline_callback_read_char() called with no handler!^M
ERROR: Process no longer exists
All we need to is to continue the inferior in the foreground, and type
a command while the inferior is running. E.g.:
(gdb) set annotate 2
▒▒pre-prompt
(gdb)
▒▒prompt
c
▒▒post-prompt
Continuing.
▒▒starting
▒▒frames-invalid
*inferior is running now*
p 1<ret>
readline: readline_callback_read_char() called with no handler!
Aborted (core dumped)
$
When we run a foreground execution command we call
target_terminal_inferior to stop GDB from processing input, and to put
the inferior's terminal settings in effect. Then we tell readline to
hide the prompt with display_gdb_prompt, which clears readline's input
callback too. When the target stops, we call target_terminal_ours,
which re-installs stdin in the event loop, and then we redisplay the
prompt, reinstalling the readline callbacks.
However, when annotations are in effect, the "frames-invalid"
annotation code calls target_terminal_ours after 'resume' had already
called target_terminal_inferior:
(top-gdb) bt
#0 0x000000000056b82f in annotate_frames_invalid () at gdb/annotate.c:219
#1 0x000000000072e6cc in reinit_frame_cache () at gdb/frame.c:1705
#2 0x0000000000594bb9 in registers_changed_ptid (ptid=...) at gdb/regcache.c:612
#3 0x000000000064cca1 in target_resume (ptid=..., step=1, signal=GDB_SIGNAL_0) at gdb/target.c:2136
#4 0x00000000005f57af in resume (step=1, sig=GDB_SIGNAL_0) at gdb/infrun.c:2263
#5 0x00000000005f6051 in proceed (addr=
18446744073709551615, siggnal=GDB_SIGNAL_DEFAULT, step=1) at gdb/infrun.c:2613
And then once we hide the prompt and remove readline's input handler
callback, we're in a bad state. We end up with the target running
supposedly in the foreground, but with stdin still installed on the
event loop. Any input then calls into readline, which aborts because
no rl_linefunc callback handler is installed:
Program received signal SIGABRT, Aborted.
0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
56 return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig);
(top-gdb) bt
#0 0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
#1 0x0000003b36a36f68 in __GI_abort () at abort.c:89
During symbol reading, debug info gives source 9 included from file at zero line 0.
During symbol reading, debug info gives command-line macro definition with non-zero line 19: _STDC_PREDEF_H 1.
#2 0x0000000000784a25 in rl_callback_read_char () at src/readline/callback.c:116
#3 0x0000000000619111 in rl_callback_read_char_wrapper (client_data=0x0) at src/gdb/event-top.c:167
#4 0x00000000006194e7 in stdin_event_handler (error=0, client_data=0x0) at src/gdb/event-top.c:373
#5 0x00000000006180da in handle_file_event (data=...) at src/gdb/event-loop.c:763
#6 0x00000000006175c1 in process_event () at src/gdb/event-loop.c:340
#7 0x0000000000617688 in gdb_do_one_event () at src/gdb/event-loop.c:404
#8 0x00000000006176d8 in start_event_loop () at src/gdb/event-loop.c:429
#9 0x0000000000619143 in cli_command_loop (data=0x0) at src/gdb/event-top.c:182
#10 0x000000000060f4c8 in current_interp_command_loop () at src/gdb/interps.c:318
#11 0x0000000000610691 in captured_command_loop (data=0x0) at src/gdb/main.c:323
#12 0x000000000060c385 in catch_errors (func=0x610676 <captured_command_loop>, func_args=0x0, errstring=0x900241 "", mask=RETURN_MASK_ALL)
at src/gdb/exceptions.c:237
#13 0x0000000000611b8f in captured_main (data=0x7fffffffd7b0) at src/gdb/main.c:1151
#14 0x000000000060c385 in catch_errors (func=0x610a8e <captured_main>, func_args=0x7fffffffd7b0, errstring=0x900241 "", mask=RETURN_MASK_ALL)
at src/gdb/exceptions.c:237
#15 0x0000000000611bb8 in gdb_main (args=0x7fffffffd7b0) at src/gdb/main.c:1159
#16 0x000000000045ef57 in main (argc=3, argv=0x7fffffffd8b8) at src/gdb/gdb.c:32
The fix is to make the annotation code call target_terminal_inferior
again after printing, if the inferior's settings were in effect.
While at it, when we're doing output only, instead of
target_terminal_ours, we should call target_terminal_ours_for_output.
The latter doesn't actually remove stdin from the event loop, and also
leaves SIGINT forwarded to the target.
New test included.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17472
* annotate.c (annotate_breakpoints_invalid): Use
target_terminal_our_for_output instead of target_terminal_ours.
Give back the terminal to the target.
(annotate_frames_invalid): Likewise.
gdb/testsuite/
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17472
* gdb.base/annota-input-while-running.c: New file.
* gdb.base/annota-input-while-running.exp: New file.
Pedro Alves [Fri, 17 Oct 2014 12:31:25 +0000 (13:31 +0100)]
Make common code handle target_terminal_* idempotency
I found a place that should be giving back the terminal to the target,
but only if the target was already owning it. So I need to add a
getter for who owns the terminal.
The trouble is that several places/target have their own globals to
track this state:
- inflow.c:terminal_is_ours
- remote.c:remote_async_terminal_ours_p
- linux-nat.c:async_terminal_is_ours
- go32-nat.c:terminal_is_ours
While one might think of adding a new target_ops method to query this,
conceptually, this state isn't really part of a particular target_ops.
Considering multi-target, the core shouldn't have to ask all targets
to know whether it's GDB that owns the terminal. There's only one GDB
(or rather, only one top level interpreter).
So what this comment does is add a new global that is tracked by the
core instead. A subsequent pass may later remove the other globals.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
* target.c (enum terminal_state): New enum.
(terminal_state): New global.
(target_terminal_init): New function.
(target_terminal_inferior): Skip if inferior already owns the
terminal.
(target_terminal_ours, target_terminal_ours_for_output): New
functions.
* target.h (target_terminal_init): Convert to function prototype.
(target_terminal_ours_for_output): Convert to function prototype
and tweak comment.
(target_terminal_ours): Convert to function prototype and tweak
comment.
* windows-nat.c (do_initial_windows_stuff): Call
target_terminal_init instead of child_terminal_init_with_pgrp.
Hans-Peter Nilsson [Fri, 17 Oct 2014 11:10:18 +0000 (13:10 +0200)]
Fix ld tests with sysroot=/ and --enable-targets=all and test --print-sysroot
* ld-scripts/sysroot-prefix.exp: Log $ld_sysroot. Handle sysroot
== "/" as a separate sysroot-configuration with separable
test-types.
(sysroot_prefix_tests): Include all existing sysroot tests in
sysroot == "/" tests except exclude those where a --sysroot option
is not specified.
* lib/ld-lib.exp (check_sysroot_available): Rewrite to use
--print-sysroot instead of relying on error code from using
--sysroot=... Also, set $ld_sysroot.
The reason we exclude not just the failing "full-path =-prefixed
without" but also the passing "plain =-prefixed without but -Lpath"
for sysroot == "/" is that for the latter to succeed, we have to make
assumptions about the system not having a /sysroot directory or
assumptions about its contents etc.
When passing --enable-targets=all --enable-64-bit-bfd (the
latter not required for a "64-bit-host" of course) the ld --help
output got too much to handle for poor tcl (or maybe dejagnu is
to blame) and remote_exec exited with an error, so the
configuration being tested was mishandled as being a
sysroot-less configuration. Using --version instead of --help
would work too, but the new --print-sysroot option calls for
nominal coverage, so why not use that instead.
Hans-Peter Nilsson [Fri, 17 Oct 2014 11:07:09 +0000 (13:07 +0200)]
Implement --print-sysroot in ld.
* ldlex.h (enum option_values): Add entry OPTION_PRINT_SYSROOT.
* lexsup.c (ld_options): Add entry for --print-sysroot.
(parse_args) <OPTION_PRINT_SYSROOT>: Print sysroot and exit early.
Hans-Peter Nilsson [Fri, 17 Oct 2014 11:06:56 +0000 (13:06 +0200)]
Implement --print-sysroot in ld.
* ldlex.h (enum option_values): Add entry OPTION_PRINT_SYSROOT.
* lexsup.c (ld_options): Add entry for --print-sysroot.
(parse_args) <OPTION_PRINT_SYSROOT>: Print sysroot and exit early.
Pedro Alves [Fri, 17 Oct 2014 10:18:59 +0000 (11:18 +0100)]
Delete Tru64 support
This commit does most of the mechanical removal. IOW, the easy part.
procfs.c isn't touched beyond removing a couple obvious bits that are
guarded by a couple macros defined in config/alpha/nm-osf3.h. Going
beyond that for procfs.c & co would be a harder excision that
potentially affects Solaris.
Some comments in the generic alpha code ABIs that may still be
relevant and I wouldn't know what to do with them. That can always be
done on a separate pass, preferably by someone who can test on alpha.
A couple other spots have references to OSF/Tru64 and related files
being removed, but it felt like removing them would make things worse,
not better. We can revisit those when we next need to touch that
code.
I didn't remove a reference to osf in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.
Built and tested on x86_64 Fedora 20, with --enable-targets=all.
Tested that building for --target=alpha-osf3 on x86_64 Fedora 20
fails with:
checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
*** Configuration alpha-unknown-osf3 is obsolete.
*** Support has been REMOVED.
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `build-osf'
make: *** [all] Error 2
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_64_TARGET_OBS): Remove alpha-osf1-tdep.o.
(HFILES_NO_SRCDIR): Remove config/alpha/nm-osf3.h.
(ALLDEPFILES): Remove alpha-nat.c, alpha-osf1-tdep.c and
solib-osf.c.
* NEWS: Mention that support for alpha*-*-osf* has been removed.
* ada-lang.h [__alpha__ && __osf__]
(ADA_KNOWN_RUNTIME_FILE_NAME_PATTERNS): Delete.
* alpha-nat.c, alpha-osf1-tdep.c: Delete files.
* alpha-tdep.c (alpha_gdbarch_init): Remove reference to
GDB_OSABI_OSF1.
* config/alpha/alpha-osf3.mh, config/alpha/nm-osf3.h: Delete
files.
* config/djgpp/fnchange.lst (config/alpha/alpha-osf1.mh)
(config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh): Delete.
* configure: Regenerate.
* configure.ac: Remove references to osf.
* configure.host: Handle alpha*-*-osf* in the obsolete hosts
section. Remove all other references to osf.
* configure.tgt: Add alpha*-*-osf* to the obsolete targets section.
Remove all other references to osf.
* dec-thread.c: Delete file.
* defs.h (GDB_OSABI_OSF1): Delete.
* inferior.h (START_INFERIOR_TRAPS_EXPECTED): New unconditionally
defined.
* osabi.c (gdb_osabi_names): Delete "OSF/1".
* procfs.c (procfs_debug_inferior) [PROCFS_DONT_TRACE_FAULTS]:
Delete code.
(unconditionally_kill_inferior)
[PROCFS_NEED_CLEAR_CURSIG_FOR_KILL]: Delete code.
* solib-osf.c: Delete file.
gdb/testsuite/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.base/callfuncs.exp: emove references to osf.
* gdb.base/sigall.exp: Likewise.
* gdb.gdb/selftest.exp: Likewise.
* gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
* gdb.mi/non-stop.c: Likewise.
* gdb.mi/pthreads.c: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/sigall-reverse.exp: Likewise.
* gdb.threads/pthreads.c: Likewise.
* gdb.threads/pthreads.exp: Likewise.
gdb/doc/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Ada Tasks and Core Files): Delete mention of Tru64.
(SVR4 Process Information): Delete mention of OSF/1.
Pedro Alves [Fri, 17 Oct 2014 10:05:06 +0000 (11:05 +0100)]
Fix build without libexpat
clear_threads_listing_context is used for thread listing methods other
than the xml based, but it's only defined when HAVE_LIBEXPAT is defined.
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
* remote.c (clear_threads_listing_context): Move higher up, out of
the HAVE_LIBEXPAT guard.
Yao Qi [Fri, 10 Oct 2014 13:17:11 +0000 (21:17 +0800)]
Don't check target_info exists noargs in commands.exp
I am confused by the noargs checking at each proc in commands.exp,
if [target_info exists noargs] {
verbose "Skipping progvar_simple_while_test because of noargs."
return
}
gdb_test_no_output "set args 5" "set args in progvar_simple_while_test"
if { ![runto factorial] } then { gdb_suppress_tests }
# Don't depend upon argument passing, since most simulators don't
# currently support it. Bash value variable to be what we want.
gdb_test "p value=5" ".*" "set value to 5 in progvar_simple_if_test #2"
They are conflicting to me. If the argument passing can't be done on
the target, we skip this test, why do we still have to set value below?
On the other hand, the test case is compiled with -DFAKEARGV, it doesn't
get anything from argv[1], why do we need to skip it if noargs is true?
I don't find any useful clues from the git log, as the code is quite
old, predating import to sourceware cvs. However, I find something
useful from the ChangeLog.
Thu Jul 20 13:28:36 1995 Jeffrey A. Law <law@rtl.cygnus.com>
.....
* gdb.base/commands.exp: Protect tests which need arguments with
$noargs conditionals.
Mon Apr 21 13:38:58 1997 Fred Fish <fnf@cygnus.com>
* gdb.base/run.c: Use FAKEARGV to build test executable that
does not require a command line arg, since most simulators
don't currently support passing such an arg into the simulated
program.
* gdb.base/commands.exp: Change tests to insert the proper
value as the arg to the first recursive factorial call. Change
compilation line to define FAKEARGV at compile time.
Jeff added noargs checking as argument is passed to the inferior. Then,
I presume Fred wanted to run this test on simulators which don't support
argument passing, and change the code not get input from argv. (I guess)
noargs wasn't set in simulator board files at that moment.
Since Fred changed test to set input by gdb, instead of getting input
from argv, the test should be able to run on target doesn't support
argument passing, such as simulator and gdbserver.
This patch is to remove these checks to noargs and "set args". I run
commands.exp with these board files, and no fail is found
- unix and native-gdbserver
- arm-none-eabi with qemu
- gdbserver on arm-linux-gnueabi with qemu
gdb/testsuite:
2014-10-17 Yao Qi <yao@codesourcery.com>
* gdb.base/commands.exp (gdbvar_complex_if_while_test): Don't check
'target_info exists noargs'.
(test_command_prompt_position): Likewise.
(progvar_simple_if_test): Don't check 'target_info exists noargs'.
Remove "set args".
(progvar_simple_while_test): Likewise.
(progvar_complex_if_while_test): Likewise.
(if_while_breakpoint_command_test): Likewise.
(infrun_breakpoint_command_test): Likewise.
(breakpoint_command_test): Likewise.
(watchpoint_command_test): Likewise.
(bp_deleted_in_command_test): Likewise.
(temporary_breakpoint_commands): Likewise.
Alan Modra [Thu, 16 Oct 2014 23:01:12 +0000 (09:31 +1030)]
daily update
Joel Brobecker [Tue, 14 Oct 2014 16:47:43 +0000 (12:47 -0400)]
Use strtod instead of strtold in libiberty/d-demangle.c
strtold is currently used to decode templates which have a floating-point
value encoded inside; but this routine is not available on some systems,
such as Solaris 2.9 for instance.
This patch fixes the issue by replace the use of strtold by strtod.
It reduces a bit the precision, but it should still remain acceptable
in most cases.
libiberty/ChangeLog:
* d-demangle.c: Replace strtold with strtod in global comment.
(strtold): Remove declaration.
(strtod): New declaration.
(dlang_parse_real): Declare value as double instead of long
double. Replace call to strtold by call to strtod.
Update format in call to snprintf.
Tristan Gingold [Thu, 16 Oct 2014 11:50:07 +0000 (13:50 +0200)]
Darwin: sanitize %gs and %fs values.
Some Darwin kernels return values out of bounds for gs and fs segments.
With this commit, they are masked to avoid garbage.
gdb/ChangeLog:
* i386-darwin-nat.c (i386_darwin_fetch_inferior_registers)
(i386_darwin_store_inferior_registers): Sanitize gs and fs values
on amd64.
Alan Modra [Thu, 16 Oct 2014 10:46:07 +0000 (21:16 +1030)]
Fix 17492, ld segfault with --oformat=binary
PR 17492
* elf32-arm.c (elf32_arm_add_symbol_hook): Only set has_gnu_symbols
on ELF output bfd.
* elf32-i386.c (elf_i386_add_symbol_hook): Likewise.
* elf32-m68k.c (elf_m68k_add_symbol_hook): Likewise.
* elf32-ppc.c (ppc_elf_add_symbol_hook): Likewise.
* elf32-sparc.c (elf32_sparc_add_symbol_hook): Likewise.
* elf64-ppc.c (ppc64_elf_add_symbol_hook): Likewise.
* elf64-sparc.c (elf64_sparc_add_symbol_hook): Likewise.
* elf64-x86-64.c (elf_x86_64_add_symbol_hook): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_add_symbol_hook): Likewise.
* elf-s390-common.c (elf_s390_add_symbol_hook): Likewise. Handle
STB_GNU_UNIQUE too.
Yao Qi [Fri, 10 Oct 2014 12:52:25 +0000 (20:52 +0800)]
Don't check noargs in remotetimeout.exp
The condition [target_info exists noargs] is checked when
remotetimeout.exp was added
https://sourceware.org/ml/gdb-patches/2005-02/msg00052.html
noargs means GDB does not support argument passing for inferior,
rather than doesn't support argument passing to GDB. remotetimeout.exp
passes -l to GDB only, doesn't pass any arguments to the inferior.
This patch is to remove such unnecessary checking, and
remotetimeout.exp then can be run with native-gdbserver board file.
gdb/testsuite:
2014-10-16 Yao Qi <yao@codesourcery.com>
* gdb.base/remotetimeout.exp: Remove noargs checking.
Alan Modra [Wed, 15 Oct 2014 23:08:09 +0000 (09:38 +1030)]
PR17488, powerpc64-linux-ld segfault
For binary ouput, we don't have an ELF bfd output so can't access
elf_elfheader. The elf64-ppc.c changes are really just a tidy,
triggered by looking at all places where the abiversion bits are
accessed.
bfd/
* elf64-ppc.c (ppc64_elf_before_check_relocs): Do .opd processing
even when output is not ppc64 ELF. Remove redundant tests on
type of input bfd.
ld/
PR 17488
* emultempl/ppc64elf.em (gld${EMULATION_NAME}_finish): Don't attempt
to access ELF header e_flags when not ppc64 ELF output.
Alan Modra [Wed, 15 Oct 2014 23:01:12 +0000 (09:31 +1030)]
daily update
Han Shen [Wed, 15 Oct 2014 22:23:01 +0000 (15:23 -0700)]
Here we have the patch for gold aarch64 backend to support relaxation.
In short relaxation is the linker's generation of stubs that fixes the
out-of-range jumps/branches in the original object file.
With this implementation, we are able to link a 456MB aarch64 application.
Tested:
1) Build natively on x86_64 and aarch64 machines.
2) Pass unit tests regarding relaxation.
Pedro Alves [Wed, 15 Oct 2014 21:48:35 +0000 (22:48 +0100)]
DEC threads: Simplify updating the thread list
Seems to me that we can simplify DEC thread's
target_update_thread_list implementation, avoiding the need to build
the array of GDB threads.
I have no way to test this, but then again support for Tru64 is about
to be removed.
Pushing anyway to have the last version in git be the cleanest one
should start from, if this file turns out to be resurrected in the
future.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* dec-thread.c (dec_thread_count_gdb_threads)
(dec_thread_add_gdb_thread): Delete.
(dec_thread_update_thread_list): Delete.
(dec_thread_find_new_threads): Rename to ...
(dec_thread_update_thread_list): ... this. Delete GDB-size
threads that are no longer found in dec_thread_list.
(resync_thread_list): Delete.
(dec_thread_wait): Call dec_thread_update_thread_list instead of
resync_thread_list.
Pedro Alves [Wed, 15 Oct 2014 21:44:00 +0000 (22:44 +0100)]
remote: get rid of all the T packets when syncing the thread list
This commit avoids the prune_threads call in the remote target's
target_update_thread_list's implementation, eliminating all the "thread
alive" RSP traffic (one packet per thread) whenever we fetch the
thread list.
IOW, this:
Sending packet: $Tp2141.2150#82...Packet received: OK
Sending packet: $Tp2141.214f#b7...Packet received: OK
Sending packet: $Tp2141.2141#82...Packet received: OK
... more T packets; it's one per previously known live thread ...
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n
Becomes:
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n
Tested on x86_64 Fedora 20, native gdbserver:
- tests the qXfer:threads:read method.
Tested on x86_64 Fedora 20, native gdbserver with qXfer:threads:read
force-disabled in gdbserver:
- So that GDB falls back to the qfThreadInfo/qsThreadInfo method.
And also manually smoked tested force disabling both
qXfer:threads:read and qfThreadInfo/qsThreadInfo in gdbserver.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): New macro.
* remote.c (remote_update_thread_list): Skip calling prune_threads
if any thread listing method is supported, and instead walk over
the set of remote threads listed, deleting those that are not
found in GDB's thread list.
Pedro Alves [Wed, 15 Oct 2014 21:44:00 +0000 (22:44 +0100)]
Push pruning old threads down to the target
When GDB wants to sync the thread list with the target's (e.g., due to
"info threads"), it calls update_thread_list:
update_thread_list (void)
{
prune_threads ();
target_find_new_threads ();
update_threads_executing ();
}
And then prune_threads does:
prune_threads (void)
{
struct thread_info *tp, *next;
for (tp = thread_list; tp; tp = next)
{
next = tp->next;
if (!thread_alive (tp))
delete_thread (tp->ptid);
}
}
Calling thread_live on each thread one by one is expensive.
E.g., on Linux, it ends up doing kill(SIG0) once for each thread. Not
a big deal, but still a bunch of syscalls...
With the remote target, it's cumbersome. That thread_alive call ends
up generating one T packet per thread:
Sending packet: $Tp2141.2150#82...Packet received: OK
Sending packet: $Tp2141.214f#b7...Packet received: OK
Sending packet: $Tp2141.2141#82...Packet received: OK
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n
That seems a bit silly when target_find_new_threads method
implementations will always fetch the whole current set of target
threads, and then add those that are not in GDB's thread list, to
GDB's thread list.
This patch thus pushes down the responsibility of pruning dead threads
to the target_find_new_threads method instead, so a target may
implement pruning dead threads however it wants.
Once we do that, target_find_new_threads becomes a misnomer, so the
patch renames it to target_update_thread_list.
The patch doesn't attempt to do any optimization to any target yet.
It simply exports prune_threads, and makes all implementations of
target_update_thread_list call that. It's meant to be a no-op.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* ada-tasks.c (print_ada_task_info, task_command_1): Adjust.
* bsd-uthread.c (bsd_uthread_find_new_threads): Rename to ...
(bsd_uthread_update_thread_list): ... this. Call prune_threads.
(bsd_uthread_target): Adjust.
* corelow.c (core_open): Adjust.
* dec-thread.c (dec_thread_find_new_threads): Update comment.
(dec_thread_update_thread_list): New function.
(init_dec_thread_ops): Adjust.
* gdbthread.h (prune_threads): New declaration.
* linux-thread-db.c (thread_db_find_new_threads): Rename to ...
(thread_db_update_thread_list): ... this. Call prune_threads.
(init_thread_db_ops): Adjust.
* nto-procfs.c (procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
(procfs_attach, procfs_create_inferior, init_procfs_targets):
Adjust.
* obsd-nat.c (obsd_find_new_threads): Rename to ...
(obsd_update_thread_list): ... this. Call prune_threads.
(obsd_add_target): Adjust.
* procfs.c (procfs_target): Adjust.
(procfs_notice_thread): Update comment.
(procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
* ravenscar-thread.c (ravenscar_update_inferior_ptid): Update
comment.
(ravenscar_wait): Adjust.
(ravenscar_find_new_threads): Rename to ...
(ravenscar_update_thread_list): ... this. Call prune_threads.
(init_ravenscar_thread_ops): Adjust.
* record-btrace.c (record_btrace_find_new_threads): Rename to ...
(record_btrace_update_thread_list): ... this. Adjust comment.
(init_record_btrace_ops): Adjust.
* remote.c (remote_threads_info): Rename to ...
(remote_update_thread_list): ... this. Call prune_threads.
(remote_start_remote, extended_remote_attach_1, init_remote_ops):
Adjust.
* sol-thread.c (check_for_thread_db): Adjust.
(sol_find_new_threads_callback): Rename to ...
(sol_update_thread_list_callback): ... this.
(sol_find_new_threads): Rename to ...
(sol_update_thread_list): ... this. Call prune_threads. Adjust.
(sol_get_ada_task_ptid, init_sol_thread_ops): Adjust.
* target-delegates.c: Regenerate.
* target.c (target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* target.h (struct target_ops): Rename to_find_new_threads field
to to_update_thread_list.
(target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* thread.c (prune_threads): Make extern.
(update_thread_list): Adjust.
Pedro Alves [Wed, 15 Oct 2014 21:43:59 +0000 (22:43 +0100)]
Merge remote thread listing methods
We have three methods to list the current remote thread list:
1. The qXfer:threads:read method (the preferred one nowadays), builds a
remote thread list while parsing the XML, and then after the XML
parsing is done, goes over the built list and adds threads GDB doesn't
know about yet to GDB's list.
2. If the qXfer method isn't available, we fallback to using the
qfThreadInfo/qsThreadInfo packets. When we do this, we adds threads
to GDB's list immediately as we parse the qfThreadInfo/qsThreadInfo
packet replies.
3. And then if the previous method isn't available either, we try the
old deprecated qL packet. This path is already looking somewhat
broken for not using remote_notice_new_inferior to add threads to
GDB's list.
This patch makes all variants work in two passes, like the qXfer
method, and then makes all variants share the code path that adds
threads to GDB's list.
Tested on x86_64 Fedora 20 with native gdbserver.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* remote.c (remote_get_threadlist, remote_threadlist_iterator):
Add describing comment. Return -1 if the qL packet is not
supported.
(struct thread_item, thread_item_t): Move higher up in
the file. Add comments.
(struct threads_parsing_context): Move higher up in
the file, add comments, and remote to ...
(struct threads_listing_context): ... this.
(remote_newthread_step): Don't add the thread to GDB's thread
database here. Instead push it to the thread_listing_context
list.
(remote_find_new_threads): Rename to ...
(remote_get_threads_with_ql): ... this. Add target_ops and
targets_listing_context parameters. Pass down context.
(start_thread): Adjust.
(clear_threads_parsing_context): Rename to ...
(clear_threads_listing_context): ... this.
(remote_get_threads_with_qxfer): New, with parts salvaged from old
remote_threads_info.
(remote_get_threads_with_qthreadinfo): Ditto.
(remote_threads_info): Reimplement.
Pedro Alves [Wed, 15 Oct 2014 19:18:32 +0000 (20:18 +0100)]
Non-stop + software single-step archs: don't force displaced-stepping for all single-steps
This finally reverts this bit of commit
929dfd4f:
2009-07-31 Pedro Alves <pedro@codesourcery.com>
Julian Brown <julian@codesourcery.com>
...
(resume): If this is a software single-stepping arch, and
displaced-stepping is enabled, use it for all single-step
requests.
...
That means that in non-stop (or really displaced-stepping) mode, on
software single-step archs - even those that only use sss breakpoints
to deal with atomic sequences, like PPC - if we have more than one
thread single-stepping, we'll always serialize the threads'
single-steps, as only one thread may be displaced stepping at a given
time, because there's only one scratch pad.
We originally did that because GDB didn't support having multiple
threads software-single-stepping simultaneously. The previous patches
fixed that limitation, so we can now finally revert this too.
Tested on:
- x86_64 Fedora 20, on top of the 'software single-step on x86'
series.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* infrun.c (resume): Don't force displaced-stepping for all
single-steps on software single-stepping archs.
Pedro Alves [Wed, 15 Oct 2014 19:18:32 +0000 (20:18 +0100)]
Make single-step breakpoints be per-thread
This patch finally makes each thread have its own set of single-step
breakpoints. This paves the way to have multiple threads software
single-stepping, though this patch doesn't flip that switch on yet.
That'll be done on a subsequent patch.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* breakpoint.c (single_step_breakpoints): Delete global.
(insert_single_step_breakpoint): Adjust to store the breakpoint
pointer in the current thread.
(single_step_breakpoints_inserted, remove_single_step_breakpoints)
(cancel_single_step_breakpoints): Delete functions.
(breakpoint_has_location_inserted_here): Make extern.
(single_step_breakpoint_inserted_here_p): Adjust to walk the
breakpoint list.
* breakpoint.h (breakpoint_has_location_inserted_here): New
declaration.
(single_step_breakpoints_inserted, remove_single_step_breakpoints)
(cancel_single_step_breakpoints): Remove declarations.
* gdbthread.h (struct thread_control_state)
<single_step_breakpoints>: New field.
(delete_single_step_breakpoints)
(thread_has_single_step_breakpoints_set)
(thread_has_single_step_breakpoint_here): New declarations.
* infrun.c (follow_exec): Also clear the single-step breakpoints.
(singlestep_breakpoints_inserted_p, singlestep_ptid)
(singlestep_pc): Delete globals.
(infrun_thread_ptid_changed): Remove references to removed
globals.
(resume_cleanups): Delete the current thread's single-step
breakpoints.
(maybe_software_singlestep): Remove references to removed globals.
(resume): Adjust to use thread_has_single_step_breakpoints_set and
delete_single_step_breakpoints.
(init_wait_for_inferior): Remove references to removed globals.
(delete_thread_infrun_breakpoints): Delete the thread's
single-step breakpoints too.
(delete_just_stopped_threads_infrun_breakpoints): Don't delete
single-step breakpoints here.
(delete_stopped_threads_single_step_breakpoints): New function.
(adjust_pc_after_break): Adjust to use
thread_has_single_step_breakpoints_set.
(handle_inferior_event): Remove references to removed globals.
Use delete_stopped_threads_single_step_breakpoints.
(handle_signal_stop): Adjust to per-thread single-step
breakpoints. Swap test order to do cheaper tests first.
(switch_back_to_stepped_thread): Extend debug output. Remove
references to removed globals.
* record-full.c (record_full_wait_1): Adjust to per-thread
single-step breakpoints.
* thread.c (delete_single_step_breakpoints)
(thread_has_single_step_breakpoints_set)
(thread_has_single_step_breakpoint_here): New functions.
(clear_thread_inferior_resources): Also delete the thread's
single-step breakpoints.
Pedro Alves [Wed, 15 Oct 2014 19:18:32 +0000 (20:18 +0100)]
thread.c: cleanup breakpoint deletion
A little refactoring to reduce duplicate code.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* thread.c (delete_thread_breakpoint): New function.
(delete_step_resume_breakpoint)
(delete_exception_resume_breakpoint): Use it.
(delete_at_next_stop): New function.
(clear_thread_inferior_resources): Use delete_at_next_stop.
Pedro Alves [Wed, 15 Oct 2014 19:18:31 +0000 (20:18 +0100)]
Remove deprecated_insert_raw_breakpoint and friends
There are no users of deprecated_{insert,remove}_raw_breakpoint left.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* breakpoint.c (regular_breakpoint_inserted_here_p): Inline ...
(breakpoint_inserted_here_p): ... here. Remove special case for
software single-step breakpoints.
(find_non_raw_software_breakpoint_inserted_here): Inline ...
(software_breakpoint_inserted_here_p): ... here. Remove special
case for software single-step breakpoints.
(bp_target_info_copy_insertion_state)
(deprecated_insert_raw_breakpoint)
(deprecated_remove_raw_breakpoint): Delete functions.
* breakpoint.h (deprecated_insert_raw_breakpoint)
(deprecated_remove_raw_breakpoint): Remove declarations.
Pedro Alves [Wed, 15 Oct 2014 19:18:31 +0000 (20:18 +0100)]
Put single-step breakpoints on the bp_location chain
This patch makes single-step breakpoints "real" breakpoints on the
global location list.
There are several benefits to this:
- It removes the currently limitation that only 2 single-step
breakpoints can be inserted. See an example here of a discussion
around a case that wants more than 2, possibly unbounded:
https://sourceware.org/ml/gdb-patches/2014-03/msg00663.html
- makes software single-step work on read-only code regions.
The logic to convert a software breakpoint to a hardware breakpoint
if the memory map says the breakpoint address is in read only memory
is in insert_bp_location. Because software single-step breakpoints
bypass all that go and straight to target_insert_breakpoint, we
can't software single-step over read only memory. This patch
removes that limitation, and adds a test that makes sure that works,
by forcing a code region to read-only with "mem LOW HIGH ro" and
then stepping through that.
- Fixes PR breakpoints/9649
This is an assertion failure in insert_single_step_breakpoint in
breakpoint.c, because we may leave stale single-step breakpoints
behind on error.
The tests for stepping through read-only regions exercise the root
cause of the bug, which is that we leave single-step breakpoints
behind if we fail to insert any single-step breakpoint. Deleting
the single-step breakpoints in resume_cleanups,
delete_just_stopped_threads_infrun_breakpoints, and
fetch_inferior_event fixes this. Without that, we'd no longer hit
the assertion, as that code is deleted, but we'd instead run into
errors/warnings trying to insert/remove the stale breakpoints on
next resume.
- Paves the way to have multiple threads software single-stepping at
the same time, leaving update_global_location_list to worry about
duplicate locations.
- Makes the moribund location machinery aware of software single-step
breakpoints, paving the way to enable software single-step on
non-stop, instead of forcing serialized displaced stepping for all
single steps.
- It's generaly cleaner.
We no longer have to play games with single-step breakpoints
inserted at the same address as regular breakpoints, like we
recently had to do for 7.8. See this discussion:
https://sourceware.org/ml/gdb-patches/2014-06/msg00052.html.
Tested on x86_64 Fedora 20, on top of my 'single-step breakpoints on
x86' series.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
PR breakpoints/9649
* breakpoint.c (single_step_breakpoints, single_step_gdbarch):
Delete array globals.
(single_step_breakpoints): New global.
(breakpoint_xfer_memory): Remove special handling for single-step
breakpoints.
(update_breakpoints_after_exec): Delete bp_single_step
breakpoints.
(detach_breakpoints): Remove special handling for single-step
breakpoints.
(breakpoint_init_inferior): Delete bp_single_step breakpoints.
(bpstat_stop_status): Add comment.
(bpstat_what, bptype_string, print_one_breakpoint_location)
(adjust_breakpoint_address, init_bp_location): Handle
bp_single_step.
(new_single_step_breakpoint): New function.
(set_momentary_breakpoint, bkpt_remove_location): Remove special
handling for single-step breakpoints.
(insert_single_step_breakpoint, single_step_breakpoints_inserted)
(remove_single_step_breakpoints, cancel_single_step_breakpoints):
Rewrite.
(detach_single_step_breakpoints, find_single_step_breakpoint):
Delete functions.
(breakpoint_has_location_inserted_here): New function.
(single_step_breakpoint_inserted_here_p): Rewrite.
* breakpoint.h: Remove FIXME.
(enum bptype) <bp_single_step>: New enum value.
(insert_single_step_breakpoint): Update comment.
* infrun.c (resume_cleanups)
(delete_step_thread_step_resume_breakpoint): Remove single-step
breakpoints.
(fetch_inferior_event): Install a cleanup that removes infrun
breakpoints.
(switch_back_to_stepped_thread) <expect thread advanced also>:
Clear step-over info.
gdb/testsuite/
2014-10-15 Pedro Alves <palves@redhat.com>
PR breakpoints/9649
* gdb.base/breakpoint-in-ro-region.c (main): Add more instructions.
* gdb.base/breakpoint-in-ro-region.exp
(probe_target_hardware_step): New procedure.
(top level): Probe hardware stepping and hardware breakpoint
support. Test stepping through a read-only region, with both
"breakpoint auto-hw" on and off and both "always-inserted" on and
off.
Pedro Alves [Wed, 15 Oct 2014 19:18:30 +0000 (20:18 +0100)]
infrun.c: add for_each_just_stopped_thread
This is a preparatory/cleanup patch that does two things:
- Renames 'delete_step_thread_step_resume_breakpoint'. The
"step_resume" part is misnomer these days, as the function deletes
other kinds of breakpoints, not just the step-resume breakpoint. A
following patch will want to make it delete yet another kind of
breakpoint, even.
- Splits out the logic of which threads get those breakpoints deleted
to a separate "for_each"-style function, so that the same following
patch may use it with a different callback.
Tested on x86_64 Fedora 20.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* infrun.c (delete_step_resume_breakpoint_callback): Delete.
(delete_thread_infrun_breakpoints): New function, with parts
salvaged from delete_step_resume_breakpoint_callback.
(delete_step_thread_step_resume_breakpoint): Delete.
(for_each_just_stopped_thread_callback_func): New typedef.
(for_each_just_stopped_thread): New function.
(delete_just_stopped_threads_infrun_breakpoints): New function.
(delete_step_thread_step_resume_breakpoint_cleanup): Rename to ...
(delete_just_stopped_threads_infrun_breakpoints_cleanup):
... this. Adjust.
(wait_for_inferior, fetch_inferior_event): Adjust to renames.
Pedro Alves [Wed, 15 Oct 2014 19:18:30 +0000 (20:18 +0100)]
Rewrite non-continuable watchpoints handling
When GDB finds out the target triggered a watchpoint, and the target
has non-continuable watchpoints, GDB sets things up to step past the
instruction that triggered the watchpoint. This is just like stepping
past a breakpoint, but goes through a different mechanism - it resumes
only the thread that needs to step past the watchpoint, but also
switches a "infwait state" global, that has the effect that the next
target_wait only wait for events only from that thread.
This forcing of a ptid to pass to target_wait obviously becomes a
bottleneck if we ever support stepping past different watchpoints
simultaneously (in separate processes).
It's also unnecessary -- the target should only return events for
threads that have been resumed; if no other thread than the one we're
stepping past the watchpoint has been resumed, then those other
threads should not report events. If we couldn't assume that, then
stepping past regular breakpoints would be broken for not likewise
forcing a similar infwait_state.
So this patch eliminates infwait_state, and instead teaches keep_going
to mark step_over_info in a way that has the breakpoints module skip
inserting watchpoints (because we're stepping past one), like it skips
breakpoints when we're stepping past one.
Tested on:
- x86_64 Fedora 20 (continuable watchpoints)
- PPC64 Fedora 18 (non-steppable watchpoints)
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* breakpoint.c (should_be_inserted): Don't insert watchpoints if
trying to step past a non-steppable watchpoint.
* gdbthread.h (struct thread_info) <stepping_over_watchpoint>: New
field.
* infrun.c (struct step_over_info): Add new field
'nonsteppable_watchpoint_p' and adjust comments.
(set_step_over_info): New 'nonsteppable_watchpoint_p' parameter.
Adjust.
(clear_step_over_info): Clear nonsteppable_watchpoint_p as well.
(stepping_past_nonsteppable_watchpoint): New function.
(step_over_info_valid_p): Also return true if stepping past a
nonsteppable watchpoint.
(proceed): Adjust call to set_step_over_info. Remove reference to
init_infwait_state.
(init_wait_for_inferior): Remove reference to init_infwait_state.
(waiton_ptid): Delete global.
(struct execution_control_state)
<stepped_after_stopped_by_watchpoint>: Delete field.
(wait_for_inferior, fetch_inferior_event): Always pass
minus_one_ptid to target_wait.
(init_thread_stepping_state): Clear 'stepping_over_watchpoint'
field.
(init_infwait_state): Delete function.
(handle_inferior_event): Remove infwait_state handling.
(handle_signal_stop) <watchpoints handling>: Adjust after
stepped_after_stopped_by_watchpoint removal. Don't remove
breakpoints here nor set infwait_state. Set the thread's
stepping_over_watchpoint flag, and call keep_going instead.
(keep_going): Handle stepping_over_watchpoint. Adjust
set_step_over_info calls.
* infrun.h (stepping_past_nonsteppable_watchpoint): Declare
function.
Pedro Alves [Wed, 15 Oct 2014 19:18:29 +0000 (20:18 +0100)]
Decide whether we may have removed breakpoints based on step_over_info
... instead of trap_expected.
Gets rid of one singlestep_breakpoints_inserted_p reference, and is
generally more to the point.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* infrun.c (step_over_info_valid_p): New function.
(resume): Use step_over_info_valid_p instead of checking the
threads's trap_expected flag.
Pedro Alves [Wed, 15 Oct 2014 18:55:50 +0000 (19:55 +0100)]
gdbserver/win32: Rewrite debug registers handling
Don't use debug_reg_state for both:
* "intent" - what we want the debug registers to look like
* "reality" - what/which were the contents of the DR registers when
the event triggered
Reserve it for the former only, like in the GNU/Linux port.
Otherwise the core x86 debug registers code can get confused if the
inferior itself changes the debug registers since GDB last set them.
This is also a requirement for being able to set watchpoints while the
target is running, if/when we get to it on Windows. See the big
comment in x86_dr_stopped_data_address.
Seems to me this may also fixes propagating watchpoints to all threads
-- continue_one_thread only calls win32_set_thread_context (what
copies the DR registers to the thread), if something already fetched
the thread's context before. Something else may be masking this
issue, I haven't checked.
Smoke tested by running gdbserver under Wine, connecting to it from
GNU/Linux, and checking that I could trigger a watchpoint as expected.
Joel tested it on x86-windows using AdaCore's testsuite.
gdb/gdbserver/
2014-10-15 Pedro Alves <palves@redhat.com>
PR server/17487
* win32-arm-low.c (arm_set_thread_context): Remove current_event
parameter.
(arm_set_thread_context): Delete.
(the_low_target): Adjust.
* win32-i386-low.c (debug_registers_changed)
(debug_registers_used): Delete.
(update_debug_registers_callback): New function.
(x86_dr_low_set_addr, x86_dr_low_set_control): Mark all threads as
needing to update their debug registers.
(win32_get_current_dr): New function.
(x86_dr_low_get_addr, x86_dr_low_get_control)
(x86_dr_low_get_status): Fetch the debug register from the thread
record's context.
(i386_initial_stuff): Adjust.
(i386_get_thread_context): Remove current_event parameter. Don't
clear debug_registers_changed nor copy DR values to
debug_reg_state.
(i386_set_thread_context): Delete.
(i386_prepare_to_resume): New function.
(i386_thread_added): Mark the thread as needing to update irs
debug registers.
(the_low_target): Remove i386_set_thread_context and install
i386_prepare_to_resume.
* win32-low.c (win32_get_thread_context): Adjust.
(win32_set_thread_context): Use SetThreadContext
directly.
(win32_prepare_to_resume): New function.
(win32_require_context): New function, factored out from ...
(thread_rec): ... this.
(continue_one_thread): Call win32_prepare_to_resume on each thread
we're about to continue.
(win32_resume): Call win32_prepare_to_resume on the event thread.
* win32-low.h (struct win32_thread_info)
<debug_registers_changed>: New field.
(struct win32_target_ops): Change prototype of set_thread_context,
delete set_thread_context and add prepare_to_resume.
(win32_require_context): New declaration.
Doug Evans [Wed, 15 Oct 2014 18:43:49 +0000 (11:43 -0700)]
PR python/17364
gdb/ChangeLog:
* python/lib/gdb/__init__.py (packages): Add "printer".
* python/lib/gdb/command/bound_registers.py: Moved to ...
* python/lib/gdb/printer/bound_registers.py: ... here.
Add printer to global set of builtin printers. Rename printer from
"bound" to "mpx_bound128".
* python/lib/gdb/printing.py (_builtin_pretty_printers): New global,
registered as global "builtin" printer.
(add_builtin_pretty_printer): New function.
* data-directory/Makefile.in (PYTHON_FILE_LIST): Update, and add
gdb/printer/__init__.py.
Iain Buclaw [Wed, 15 Oct 2014 18:28:19 +0000 (19:28 +0100)]
Remove d-support.c and use gdb_demangle for demangling D symbols.
gdb/ChangeLog
* Makefile.in (SFILES): Remove d-support.c.
(COMMON_OBS): Remove d-support.o.
* d-lang.h (d_parse_symbol): Remove declaration.
* d-lang.c (d_demangle): Use gdb_demangle to demangle D symbols.
* d-support.c: Remove file.
gdb/testsuite/ChangeLog
* gdb.dlang/demangle.exp: Update for demangling changes.
Andreas Arnez [Thu, 9 Oct 2014 11:32:22 +0000 (11:32 +0000)]
Remove non-address bits for longjmp resume breakpoint
On 32-bit S390 targets the longjmp target address "naturally" has the
most significant bit set. That bit indicates the addressing mode and
is not part of the address itself. Thus, in analogy with similar
cases (like when computing the caller PC in
insert_step_resume_breakpoint_at_caller), this change removes
non-address bits from the longjmp target address before using it as a
breakpoint address.
Note that there are two ways for determining the longjmp target
address: via a probe or via a gdbarch method. This change only
affects the probe method, because it is assumed that the address
returned by the gdbarch method is usable as-is.
This change was tested together with a patch that enables longjmp
probes in glibc for S/390:
https://sourceware.org/ml/libc-alpha/2014-10/msg00277.html
gdb/ChangeLog:
* gdb/infrun.c (process_event_stop_test): Apply
gdbarch_addr_bits_remove to longjmp resume address.
Pedro Alves [Wed, 15 Oct 2014 15:21:59 +0000 (16:21 +0100)]
Delete gdb/regformats/microblaze.dat
This file:
- Isn't used by GDBserver currently.
- Isn't included in the WHICH list in features/Makefile, so hasn't
been regenerated to pick the latest microblaze or generic fixes.
Just delete it.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* regformats/microblaze.dat: Delete file.
Ajit Kumar Agarwal [Mon, 13 Oct 2014 08:58:22 +0000 (14:28 +0530)]
Microblaze: Replace microblaze-expedite from pc to rpc
The Microblaze PC register is called "rpc", not "pc", as can be seen
in microblaze-core.xml. Fix this, so GDBserver can find the register in
the regcache.
gdb/
2014-10-15 Ajit Agarwal <ajitkum@xilinx.com>
* features/Makefile (microblaze-expedite): Replace pc with rpc.
* regformats/microblaze-with-stack-protect.dat: Regenerate.
Alan Modra [Wed, 15 Oct 2014 11:22:20 +0000 (21:52 +1030)]
Merge bfd_find_nearest_line variants
When bfd_find_nearest_line_discriminator was added, not enough care
was taken to ensure all targets had a proper definition of the function.
This patch cures that by merging bfd_find_nearest_line_discriminator
and bfd_find_nearest_line target implementations.
PR 17481
* aoutx.h (NAME (aout, find_nearest_line)): Add "discriminator_ptr"
param, group "section" and "offset" params. Zero discriminator.
* bfd.c (bfd_find_nearest_line): Implement with new
_bfd_find_nearest_line.
(bfd_find_nearest_line_discriminator): Likewise.
* coff-i386.c (_bfd_generic_find_nearest_line_discriminator): Don't
define.
* coff-rs6000.c (xcoff_find_nearest_line,
xcoff_find_nearest_line_discriminator): Delete.
(_bfd_xcoff_find_nearest_line): Don't define.
(_bfd_xcoff_find_nearest_line): Define as coff_find_nearest_line.
* coff-x86_64.c (_bfd_generic_find_nearest_line_discriminator): Don't
define.
* coff64-rs6000.c (rs6000_xcoff64_vec, rs6000_xcoff64_aix_vec): Adjust.
* coffgen.c (coff_find_nearest_line_with_names): Reorder params,
adjust _bfd_dwarf2_find_nearest_line call.
(coff_find_nearest_line): Add "discriminator_ptr" param, reorder
others. Set discriminator. Adjust call.
(coff_find_nearest_line_discriminator): Delete.
* dwarf1.c (_bfd_dwarf1_find_nearest_line): Reorder params.
* dwarf2.c (find_line): Rename to..
(_bfd_dwarf2_find_nearest_line): ..this, reordering params.
Simplify setting of do_line. Delete old function.
(_bfd_dwarf2_find_line): Delete.
* ecoff.c (_bfd_ecoff_find_nearest_line): Reorder params, add
discriminator_ptr and set it.
* elf-bfd.h (_bfd_elf_find_nearest_line): Update prototype.
(_bfd_elf_find_nearest_line_discriminator): Delete.
(_bfd_elf_find_line_discriminator): Delete.
(_bfd_generic_find_nearest_line_discriminator): Don't define.
* elf.c (elf_find_function): Reorder params.
(_bfd_elf_find_nearest_line): Reorder params, add discriminator_ptr.
Adjust calls.
(_bfd_elf_find_nearest_line_discriminator): Delete.
(_bfd_elf_find_line): Adjust call.
* elf32-arm.c (arm_elf_find_function): Reorder params.
(elf32_arm_find_nearest_line): Reorder params, add discriminator_ptr.
Adjust calls.
* elf64-alpha.c (elf64_alpha_find_nearest_line): Similarly.
* elfnn-aarch64.c (aarch64_elf_find_function): Reorder params.
(elfNN_aarch64_find_nearest_line): Reorder params, add
discriminator_ptr. Adjust calls.
* elfxx-mips.c (_bfd_mips_elf_find_nearest_line): Similarly.
* elfxx-mips.h (_bfd_mips_elf_find_nearest_line): Update prototype.
* libaout.h (NAME (aout, find_nearest_line)): Update prototype.
* libbfd-in.h (_bfd_nosymbols_find_nearest_line): Update.
(_bfd_dwarf1_find_nearest_line): Likewise.
(_bfd_dwarf2_find_nearest_line): Likewise.
(_bfd_dwarf2_find_line): Delete.
(_bfd_generic_find_nearest_line_discriminator): Delete.
* libbfd.c (_bfd_generic_find_nearest_line_discriminator): Delete.
* libcoff-in.h (coff_find_nearest_line): Update prototype.
(coff_find_nearest_line_discriminator): Delete.
(coff_find_nearest_line_with_names): Update prototype.
* libecoff.h (_bfd_ecoff_find_nearest_line): Update prototype.
* mach-o.c (bfd_mach_o_find_nearest_line): Reorder params, add
discriminator_ptr. Adjust calls.
* mach-o.h (bfd_mach_o_find_nearest_line): Update prototype.
* pdp11.c (NAME (aout, find_nearest_line)): Reorder params, add
discriminator_ptr and set.
* som.c (som_find_nearest_line): Similarly.
* targets.c (BFD_JUMP_TABLE_SYMBOLS): Delete entry for
_bfd_find_nearest_line_discriminator.
(struct bfd_target <_bfd_find_nearest_line>): Adjust prototype.
(struct bfd_target <_bfd_find_nearest_line_discriminator>): Delete.
* vms-alpha.c (_bfd_vms_find_nearest_dst_line): Rename to..
(_bfd_vms_find_nearest_line): ..this. Reorder params, add
"discriminator" and set.
(_bfd_vms_find_nearest_line_discriminator): Delete.
(_bfd_generic_find_nearest_line_discriminator): Don't define.
(alpha_vms_find_nearest_line): Update define.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* libcoff.h: Regenerate.
Alan Modra [Wed, 15 Oct 2014 05:10:45 +0000 (15:40 +1030)]
Define bfd_find_line entry of BFD_JUMP_TABLE_SYMBOLS using NAME.
In https://www.sourceware.org/ml/binutils/2005-06/msg00082.html
HJ implemented bfd_find_line for DWARF2, but cheated a little in not
using the usual NAME##_find_line, saving quite a lot of boring
editing. However that shortcut probably contributed to
bfd_find_nearest_line_discriminator being implemented the same way,
and missing support for some targets.
* targets.c (BFD_JUMP_TABLE_SYMBOLS): Use NAME##_find_line.
* aout-adobe.c (aout_32_find_line): Define.
(aout_32_bfd_make_debug_symbol, aout_32_bfd_reloc_type_lookup,
aout_32_bfd_reloc_name_lookup): Define using _bfd_nosymbols define.
* aout-target.h (MY_find_line): Define.
* aout-tic30.c (MY_find_line): Define.
* binary.c (binary_find_line): Define.
* bout.c (aout_32_find_line): Define.
* coff-rs6000.c (_bfd_xcoff_find_line): Define.
* coff64-rs6000.c (rs6000_xcoff64_vec): Use coff_find_line.
(rs6000_xcoff64_aix_vec): Likewise.
* elf-bfd.h (_bfd_generic_find_line): Don't define.
* elfxx-target.h (bfd_elfNN_find_line): Define.
* i386msdos.c (msdos_find_line): Define.
* i386os9k.c (aout_32_find_line): Define.
* ieee.c (ieee_find_nearest_line, ieee_find_inliner_info): Delete func.
(ieee_find_nearest_line, ieee_find_line,
ieee_find_inliner_info): Define.
* ihex.c (ihex_find_line): Define.
* libbfd-in.h (_bfd_nosymbols_find_line): Define.
(_bfd_generic_find_line): Don't define.
* libbfd.c (_bfd_generic_find_line): Delete.
* libcoff-in.h (coff_find_line): Define.
* libecoff.h (_bfd_ecoff_find_line): Define.
* mach-o.h (bfd_mach_o_find_line): Define.
* mmo.c (mmo_find_line): Define.
* nlm-target.h (nlm_find_line): Define.
* oasys.c (oasys_find_nearest_line, oasys_find_inliner_info): Delete.
(oasys_find_nearest_line, oasys_find_line,
oasys_find_inliner_info): Define.
* pef.c (bfd_pef_find_line): Define.
* plugin.c (bfd_plugin_find_line): Define.
* ppcboot.c (ppcboot_find_line): Define.
* som.c (som_find_line): Define.
* srec.c (srec_find_line): Define.
* tekhex.c (tekhex_find_line): Define.
* versados.c (versados_find_line): Define.
* vms-alpha.c (alpha_vms_find_line): Define.
* xsym.c (bfd_sym_find_line): Define.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* libcoff.h: Regenerate.
Siva Chandra [Tue, 9 Sep 2014 13:50:26 +0000 (06:50 -0700)]
Fix gnuv3_pass_by_reference to treat dynamic classes as non-trivial.
gdb/ChangeLog:
* gnu-v3-abi.c (gnuv3_pass_by_reference): Treat dynamic classes
as non-trivial.
Siva Chandra [Tue, 9 Sep 2014 13:46:14 +0000 (06:46 -0700)]
Add new non-trial return value tests.
gdb/testsuite/ChangeLog:
* gdb.cp/non-trivial-retval.cc: Add new test cases.
* gdb.cp/non-trivial-retval.exp: Add new tests.
Siva Chandra [Tue, 9 Sep 2014 13:03:42 +0000 (06:03 -0700)]
Fix gnuv3_pass_by_reference to lookup copy c-tors with qualified args.
Before this, a copy constructor declared as in the following snippet was
not being treated as a copy constructor.
class A
{
public:
A (A &); // OK.
A (const A &); // Not being treated as a copy constructor because of the
// 'const' qualifier.
};
gdb/ChangeLog:
PR c++/13403
PR c++/15154
* gnu-v3-abi.c (gnuv3_pass_by_reference): Lookup copy constructors
with qualified args.
Siva Chandra [Mon, 8 Sep 2014 14:04:59 +0000 (07:04 -0700)]
Non trivial return value tests.
gdb/testsuite/ChangeLog:
PR c++/13403
PR c++/15154
* gdb.cp/non-trivial-retval.cc: New file.
* gdb.cp/non-trivial-retval.exp: New file.
Tristan Gingold [Wed, 15 Oct 2014 08:21:25 +0000 (10:21 +0200)]
Bump bfd version.
bfd/
2014-10-15 Tristan Gingold <gingold@adacore.com>
* version.m4: Bump version to 2.25.51
* configure: Regenerate.
binutils/
2014-10-15 Tristan Gingold <gingold@adacore.com>
* configure: Regenerate.
gas/
2014-10-15 Tristan Gingold <gingold@adacore.com>
* configure: Regenerate.
gprof/
2014-10-15 Tristan Gingold <gingold@adacore.com>
* configure: Regenerate.
ld/
2014-10-15 Tristan Gingold <gingold@adacore.com>
* configure: Regenerate.
opcodes/
2014-10-15 Tristan Gingold <gingold@adacore.com>
* configure: Regenerate.
Tristan Gingold [Wed, 15 Oct 2014 07:50:53 +0000 (09:50 +0200)]
src-release.sh: configure using --target.
* src-release.sh (do_proto_toplev): Configure with --target.
Yao Qi [Mon, 15 Sep 2014 11:06:22 +0000 (19:06 +0800)]
Fix py-parameter.exp for remote host
Test gdb.python/py-parameter.exp expects output "$srcdir/$subdir:\$cdir:\$cwd",
but proc gdb_reinitialize_dir doesn't set $srcdir/$subdir in search
directories on remote host because it doesn't exist on remote host.
proc gdb_reinitialize_dir { subdir } {
global gdb_prompt
if [is_remote host] {
return ""
}
It causes the fail below:
(gdb) python print (gdb.parameter ('directories'))^M
/tmp/gdb:$cdir:$cwd^M
(gdb) FAIL: gdb.python/py-parameter.exp: python print (gdb.parameter ('directories'))
This patch is to fix this fail by not matching $srcdir/$subdir on remote host.
gdb/testsuite:
2014-10-15 Yao Qi <yao@codesourcery.com>
* gdb.python/py-parameter.exp: Don't match $srcdir/$subdir on
remote host.
Yao Qi [Mon, 15 Sep 2014 09:40:54 +0000 (17:40 +0800)]
Fix file name matching on remote host.
I see the following fails in the remote host testing we do for mingw32
hosted GDB,
python print (symtab[1][0].symtab)^M
python.c^M
(gdb) FAIL: gdb.python/python.exp: Test decode_line current locationn filename
python print (symtab[1][0].symtab)^M
python.c^M
(gdb) FAIL: gdb.python/python.exp: Test decode_line python.c:26 filename
The test cases doesn't consider remote host and assumes that directory
on build also exists on host. In this patch, we only match file base
name if host is remote, otherwise, match file with dir name.
gdb/testsuite:
2014-10-15 Yao Qi <yao@codesourcery.com>
* gdb.python/py-symbol.exp: Match file base name if host is
remote, otherwise match file name with dir name.
* gdb.python/py-symtab.exp: Likewise.
* gdb.python/python.exp: Likewise.
Yao Qi [Mon, 15 Sep 2014 08:41:39 +0000 (16:41 +0800)]
Clean up gdb.python/ tests
This patch is to clean up various gdb.python/*.exp tests, such as
removing trailing ".*" from the pattern and fix one typo I find during
reading the code.
gdb/testsuite:
2014-10-15 Yao Qi <yao@codesourcery.com>
* gdb.python/python.exp: Remove trailing ".*". Fix typo
locationn.
* gdb.python/py-symbol.exp: Remove trailing ".*" in the
pattern.
* gdb.python/py-symtab.exp: Likewise.
Hans-Peter Nilsson [Wed, 15 Oct 2014 01:10:25 +0000 (03:10 +0200)]
Allow unquoted = as the first character in ldscript input_list names
* ldlex.l (INPUTLIST): New start condition.
(comment pattern, ",", "(", ")", "AS_NEEDED")
({FILENAMECHAR1}{FILENAMECHAR}*, "-l"{FILENAMECHAR}+)
(quoted string pattern, whitespace pattern): Add INPUTLIST to
valid start conditions.
(<INPUTLIST>"="{FILENAMECHAR1}{FILENAMECHAR}*): New NAME rule.
(ldlex_inputlist): New start-condition-setter function.
* ldgram.y (input_list1): Rename from input_list. All recursive
use changed.
(input_list): New wrapper rule for input_list1, setting
INPUTLIST lexer state for the duration of parsing input_list1.
All this to say INPUT(=/path/to/file) and not be forced to use
INPUT("=/path/to/file") whenever there's a need to force a sysroot-
prefix. Still, IMHO it seems better to make use of a previously
invalid syntax and not only change the meaning of quoted =-prefixed
paths (though arguably that's not very useful before this patchset).
This got a little bit hairier than I'd expected: I had to add a new
lexer state (aka. start condition) to avoid a first "=" being lexed as
the token "=", despite that not making sense in constructs expecting
file-names in the first place. (The grammar doesn't allow for
expressions in any part of those lists.) I guess I *could* have made
it work using that token anyway, but I didn't like the idea that you
would be able to separate the "=" from the rest of the file-name with
whitespace.
Hans-Peter Nilsson [Wed, 15 Oct 2014 01:03:59 +0000 (03:03 +0200)]
If "=" is the first character in a ldscript input file, force a sysroot prefix.
* ldlang.c (lang_add_input_file): If the first character in the
filename is '=', prepend the sysroot and force the context of that
input file to non-sysroot.
The "input_flags.sysrooted = 0" thing described in the comment is
covered by the testsuite part ("root-anchored =-prefixed script
inside"), but only observable for --with-sysroot configurations.
Hans-Peter Nilsson [Wed, 15 Oct 2014 00:59:41 +0000 (02:59 +0200)]
Add sysroot-prefix ld linker tests.
* ld-scripts/sysroot-prefix.exp, ld-scripts/sysroot-prefix-x.s,
ld-scripts/sysroot-prefix-y.s: New files.
N.B: full coverage is only possible with complementary use of
--with-sysroot when configuring.
Hans-Peter Nilsson [Wed, 15 Oct 2014 00:54:56 +0000 (02:54 +0200)]
lib/ld-lib.exp (check_sysroot_available): New proc.
Hans-Peter Nilsson [Wed, 15 Oct 2014 00:50:03 +0000 (02:50 +0200)]
ld.texinfo: "=" path-prefix forces sysroot in scripts not only SEARCH_DIR
* ld.texinfo (input files in linker scripts): When mentioning
behavior of first character "/" on scripts within sysroot, also
mention that effect can be forced by prefixing with "=" and
refer to SEARCH_DIR.
Hans-Peter Nilsson [Wed, 15 Oct 2014 00:42:14 +0000 (02:42 +0200)]
ld.texinfo: Clarify that sysroot affects "=" expansion.
* ld.texinfo (Options): When mentioning "=" and sysroot, mention
that --sysroot controls it, not only through the configuration.
Alan Modra [Tue, 14 Oct 2014 23:21:53 +0000 (09:51 +1030)]
ChangeLog typo fix
Chen Gang [Tue, 14 Oct 2014 23:18:47 +0000 (09:48 +1030)]
Fix memory overflow issue about strncat
If src contains n or more bytes, strncat() writes n+1 bytes to dest
(n from src plus the terminating null byte). Therefore, the size of
dest must be at least strlen(dest)+n+1.
* config/tc-tic4x.c (md_assemble): Correct strncat size.
Alan Modra [Tue, 14 Oct 2014 23:01:05 +0000 (09:31 +1030)]
daily update
Joel Brobecker [Thu, 9 Oct 2014 16:37:17 +0000 (12:37 -0400)]
[Ada] Error adding/subtracting pointer value to/from integral.
When trying to evaluate an expression which adds a pointer and
an integral, the evaluation succeeds if the pointer is on
the left handside of the operator, but not when it is on the right
handside:
(gdb) p something'address + 0
$1 = (system.address) 0x613418 <pck.something>
(gdb) p 0 + something'address
Argument to arithmetic operation not a number or boolean.
Same issue when doing subtractions:
(gdb) p something'address - 0
$2 = (system.address) 0x613418 <pck.something>
(gdb) p 0 - something'address
Argument to arithmetic operation not a number or boolean.
This patch enhances the Ada expression evaluator to handle
these two situations.
gdb/ChangeLog:
* ada-lang.c (ada_evaluate_subexp) <BINOP_ADD>: Add handling
of the case where the second operand is a pointer.
<BINOP_SUB>: Likewise.
gdb/testsuite/ChangeLog:
* gdb.ada/addr_arith: New testcase.
Tested on x86_64-linux.
Maciej W. Rozycki [Tue, 14 Oct 2014 20:16:07 +0000 (21:16 +0100)]
gdb.dwarf2: Testsuite 64-bit pointer truncation fixes
* gdb.dwarf2/dw2-case-insensitive-debug.S: Handle 64-bit pointers.
* gdb.dwarf2/dw2-case-insensitive.exp: Update accordingly.
* gdb.dwarf2/dw2-skip-prologue.S: Handle 64-bit pointers.
* gdb.dwarf2/dw2-skip-prologue.exp: Update accordingly.
Sergio Durigan Junior [Tue, 14 Oct 2014 18:45:13 +0000 (14:45 -0400)]
Only call {set,clear}_semaphore probe function if they are not NULL
This patch is a response to what I commented on:
<https://sourceware.org/ml/gdb-patches/2014-10/msg00046.html>
When reviewing Jose's USDT probe support patches. Basically, in his
patch he had to create dummy functions for the set_semaphore and the
clear_semaphore methods of probe_ops (gdb/probe.h), because those
functions were called inconditionally from inside gdb/breakpoint.c and
gdb/tracepoint.c. However, the semaphore concept may not apply to all
types of probes, and this is the case here: USDT probes do not have
semaphores (although SDT probes do).
Anyway, this is a simple (almost obvious) patch to guard the call to
{set,clear}_semaphore. It does not introduce any regression on a
Fedora 20 x86_64.
I will apply it in a few days in case there is no comment.
gdb/ChangeLog:
2014-10-14 Sergio Durigan Junior <sergiodj@redhat.com>
* breakpoint.c (bkpt_probe_insert_location): Call set_semaphore
only if it is not NULL.
(bkpt_probe_remove_location): Likewise, for clear_semaphore.
* probe.h (struct probe_ops) <set_semaphore>: Update comment.
(struct probe_ops) <clear_semaphore>: Likewise.
* tracepoint.c (start_tracing): Call set_semaphore only if it is
not NULL.
(stop_tracing): Likewise, for clear_semaphore.
Sergio Durigan Junior [Tue, 14 Oct 2014 18:31:09 +0000 (14:31 -0400)]
Explicitly use language_c when evaluating a SDT probe argument
Joel contacted me offlist with a question about a warning that one of
his customers was seeing. The message came from the new
linker-debugger interface, which uses SDT probes internally. The
warning said:
(gdb) run
[...]
warning: Probes-based dynamic linker interface failed.
Reverting to original interface.
Argument to arithmetic operation not a number or boolean.
This should not have happened in the environment the customer was
using (RHEL-6.x), so I found it strange. Another thing caught my
attention: the last message, saying "Argument to arithmetic operation
not a number or boolean.".
Joel kindly investigated the issue further, and found the answer for
this. To quote him:
(gdb) set lang c
(gdb) p 48+$ebp
$4 = (void *) 0xffffd0f8
So far so good. But...
(gdb) set lang ada
(gdb) p 48+$ebp
Argument to arithmetic operation not a number or boolean.
Ooops! Interestingly, if you revert the order of the operands...
(gdb) p $ebp+48
$5 = (access void) 0xffffd0f8
So the problem is doing pointer arithmetics when the language is set
to Ada.
I remembered that, during the parsing and the evaluation of SDT probe
arguments, the code sets the language as current_language, because, at
that time, I thought it was not necessary to worry about the language
given that the code implements its own parser. I was wrong. So here
is a patch to fix that, by setting the language as C, which should
guarantee that the maths are done in the right way (TM).
It was somewhat hard to find a reproducer for this issue. In the end,
what I had to do was to create a testcase that used the %ebp register
on some displacement (e.g., "-4(%ebp)"), which finally triggered the
bug. I am not sure why I could not trigger it when using other
registers, but I did not want to spend too much time investigating
this issue, which seemed like an Ada issue. Also, because of this
peculiar way to trigger the problem, the testcase only covers x86-like
targets (i.e., i*86 and x86_64 with -m32).
Joel kindly tested this for me, and it worked. I also ran a full
regression test here on my Fedora 20 x86_64, and everything is fine.
I will push this patch in a few days if there are no comments.
gdb/ChangeLog:
2014-10-14 Sergio Durigan Junior <sergiodj@redhat.com>
* stap-probe.c (stap_parse_argument): Initialize expout explicitly
using language_c, instead of current_language.
gdb/testsuite/ChangeLog:
2014-10-14 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.arch/stap-eval-lang-ada.S: Likewise.
* gdb.arch/stap-eval-lang-ada.c: Likewise.
* gdb.arch/stap-eval-lang-ada.exp: New file.
H.J. Lu [Tue, 14 Oct 2014 15:03:32 +0000 (08:03 -0700)]
Convert mov to lea only if r_offset >= 2
* elf32-i386.c (elf_i386_convert_mov_to_lea): Skip if relocation
offset is less than 2.
* elf64-x86-64.c (elf_x86_64_convert_mov_to_lea): Likewise.
Yao Qi [Sat, 30 Aug 2014 13:30:36 +0000 (21:30 +0800)]
Fix fail in mi-var-child.exp and mi-var-display.exp
Hi,
I see the following fails on arm-none-eabi target,
-var-list-children --simple-values struct_declarations ^M
^done,numchild="11",children=[...,child={name="struct_declarations.func_ptr_struct",exp="func_ptr_struct",numchild="0",value="0x0 <_ftext>",type="struct _struct_decl (*)(int, char *, long)",thread-id="1"},child={name="struct_declarations.func_ptr_ptr",exp="func_ptr_ptr",numchild="0",value="0x0 <_ftext>",type="struct _struct_decl *(*)(int, char *, long)",thread-id="1"},...
(gdb) ^M
FAIL: gdb.mi/mi-var-child.exp: listing of children, simple types: names, type and values, complex types: names and types
-var-set-format weird.func_ptr_ptr natural^M
^done,format="natural",value="0x0 <_ftext>"^M
(gdb) ^M
FAIL: gdb.mi/mi-var-display.exp: set format variable weird.func_ptr_ptr in natural
In the test, "0x0" is expected, but "0x0 <_ftext>" is in the output.
Function pointers point to address zero, and tests assume there is no
symbol on address zero. However, on my arm-none-eabi target, there is
a code symbol _ftext on address zero, and test fails. Note that "set
print symbol off" doesn't take effect for function pointer.
int (*f) (void);
f = main;
(gdb) p f
$1 = (int (*)(void)) 0x8048400 <main>
(gdb) set print symbol off
(gdb) p f
$2 = (int (*)(void)) 0x8048400 <main>
In order to erase the difference, we can assign some function address
explicitly to function pointer, so the test behaves in a unique way.
In this patch, we assign nothing1 and nothing2 to function pointers
func_ptr_struct and func_ptr_ptr respectively, and update test as the
source file is changed.
gdb/testsuite:
2014-10-14 Yao Qi <yao@codesourcery.com>
* gdb.mi/mi-var-child.c (nothing1): New function.
(nothing2): New function.
(do_children_tests): Set function pointers by nothing1 and
nothing2.
* gdb.mi/mi-var-child.exp: Step over new added statements.
Update test to match the new output.
* gdb.mi/var-cmd.c (nothing1): New function.
(nothing2): New function.
(do_children_tests): Set function pointers by nothing1 and
nothing2.
* gdb.mi/mi-var-display.exp: Update test to match output.
Step to the line specified by $line_dct_nothing.
Increase the number of lines to step.
Yao Qi [Sat, 23 Aug 2014 12:24:07 +0000 (20:24 +0800)]
Use mi_varobj_update in mi-var-child.exp and mi2-var-child.exp
Hi,
I modify mi-var-child.exp and find that the pattern to match the output
of -var-update * is quite complicated. However, it can be simplified by
using mi_varobj_update. That is what this patch does.
gdb/testsuite:
2014-10-14 Yao Qi <yao@codesourcery.com>
* gdb.mi/mi-var-child.exp: Use mi_varobj_update to simplify
tests.
* gdb.mi/mi2-var-child.exp: Likewise.
Tristan Gingold [Tue, 14 Oct 2014 07:49:47 +0000 (09:49 +0200)]
Add NEWS markers for 2.25.
binutils/
2014-10-14 Tristan Gingold <gingold@adacore.com>
* NEWS: Add marker for 2.25.
gas/
2014-10-14 Tristan Gingold <gingold@adacore.com>
* NEWS: Add marker for 2.25.
ld/
2014-10-14 Tristan Gingold <gingold@adacore.com>
* NEWS: Add marker for 2.25.
Alan Modra [Tue, 14 Oct 2014 03:06:20 +0000 (13:36 +1030)]
Avoid undefined behaviour with signed expressions
PR 17453
bfd/
* libbfd.c (COERCE16, COERCE32, COERCE64): Use unsigned types.
(EIGHT_GAZILLION): Delete.
binutils/
* dwarf.c (read_leb128): Avoid signed overflow.
(read_debug_line_header): Likewise.
gas/
* config/tc-i386.c (fits_in_signed_long): Use unsigned param and
expression to avoid signed overflow.
(fits_in_signed_byte, fits_in_unsigned_byte, fits_in_unsigned_word,
fits_in_signed_word, fits_in_unsigned_long): Similarly.
* expr.c (operand <'-'>): Avoid signed overflow.
* read.c (s_comm_internal): Likewise.
Alan Modra [Tue, 14 Oct 2014 03:00:57 +0000 (13:30 +1030)]
Correct fscanf char field count
%<number>s as an fscanf format does not include the trailing NULL.
PATH_MAX does include the trailing NULL.
PR 17453
* readelf.c (process_program_headers): Correct fscanf format used
for interpreter.
Alan Modra [Mon, 13 Oct 2014 12:27:58 +0000 (22:57 +1030)]
sparc-aout and sparc-coff breakage
* config/tc-sparc.c (sparc_md_end): Fix unused variable warnings.
Alan Modra [Mon, 13 Oct 2014 23:01:01 +0000 (09:31 +1030)]
daily update
Doug Evans [Mon, 13 Oct 2014 21:50:32 +0000 (14:50 -0700)]
Change name of file name test in py-objfile.exp.
Tests should each have their own name.
gdb/testsuite/ChangeLog:
* gdb.python/py-objfile.exp: Change name of file name test.
Doug Evans [Mon, 13 Oct 2014 21:05:34 +0000 (14:05 -0700)]
Fix dw2-op-out-param.S CU offset values.
This test will pass if the CU is the first CU in the binary.
If libc debugging info is installed it may not be, in which case
the CU offset values are wrong.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-op-out-param.S: Make DW_FORM_ref4 values be the offset
from the start of the CU.
Doug Evans [Mon, 13 Oct 2014 20:33:09 +0000 (13:33 -0700)]
fix file paths in previous commit
Doug Evans [Mon, 13 Oct 2014 19:24:54 +0000 (12:24 -0700)]
Remove some code duplication in py-objfile.c, py-progspace.c.
gdb/ChangeLog:
* py-objfile.c (objfpy_initialize): New function.
(objfpy_new, objfile_to_objfile_object): Call it.
* py-progspace.c (pspy_initialize): New function.
(pspy_new, pspace_to_pspace_object): Call it.
Alan Modra [Mon, 13 Oct 2014 04:48:21 +0000 (15:18 +1030)]
Run eh_frame optimisation for relocatable link
The idea here is to drop .eh_frame FDEs corresponding to dropped
comdat group sections or linkonce sections, but not perform changes in
encoding.
bfd/
PR 17467
* elf-eh-frame.c (ENSURE_NO_RELOCS): Don't stop at first NONE reloc.
(_bfd_elf_parse_eh_frame): When relocatable output, don't set
flags enabling conversion of CIEs and FDEs to use relative encoding.
(find_merged_cie): Similarly.
(_bfd_elf_write_section_eh_frame): Don't edit FDEs when
relocatable, except for CIE pointer.
* elflink.c (bfd_elf_reloc_symbol_deleted_p): Return true for
relocs against symbols in dropped comdat group sections.
(bfd_elf_discard_info): Do some eh_frame optimisation when
relocatable.
ld/
* ldlang.c (lang_add_section): Set up map_head.s and map_tail.s when
relocatable.
Jan Kratochvil [Mon, 13 Oct 2014 11:39:48 +0000 (13:39 +0200)]
Fix "save breakpoints" for "catch" command
gdb/ChangeLog
2014-10-13 Miroslav Franc <mfranc@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Fix "save breakpoints" for "catch" command.
* break-catch-sig.c (signal_catchpoint_print_recreate): Add trailing
newline.
gdb/testsuite/ChangeLog
2014-10-13 Jan Kratochvil <jan.kratochvil@redhat.com>
Yao Qi <yao@codesourcery.com>
Fix "save breakpoints" for "catch" command.
* gdb.base/catch-signal.exp: Add gdb_breakpoint "main".
Remove -nonewline. Match also the added "main" line.
Alan Modra [Sun, 12 Oct 2014 23:00:41 +0000 (09:30 +1030)]
daily update
Jan Kratochvil [Sun, 12 Oct 2014 19:52:39 +0000 (21:52 +0200)]
Fix "save breakpoints" for "disable $bpnum" command.
gdb/ChangeLog
2014-10-12 Miroslav Franc <mfranc@redhat.com>
Fix "save breakpoints" for "disable $bpnum" command.
* breakpoint.c (save_breakpoints): Add $bpnum for disable.
gdb/testsuite/ChangeLog
2014-10-12 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix "save breakpoints" for "disable $bpnum" command.
* gdb.base/save-bp.c (main): Add label.
* gdb.base/save-bp.exp: Add 8th disabled breakpoint. Match it.
Jan Kratochvil [Sun, 12 Oct 2014 19:47:13 +0000 (21:47 +0200)]
Use gdb_test_sequence in gdb.base/save-bp.exp.
But IMO it is a functionality regression as:
* gdb_test_sequence permits arbitary number of lines of text between those
lines being matched. Former regex string did not allow it.
This may make a difference if GDB regresses by printing some unexpected
line after the breakpoint info line (like a "silent" line).
> * \[\r\n\]+ can be used to anchor the beginning of the pattern, in the sense
> of Perl regex ^ /m match. At least I have found such cases in existing
> *.exp files so I used that. Using ^ really does not work.
>
> But I am not aware how to do Perl regex $ /m match. Using $ really does
> not work. But this means that for example the trailing
> ( \\((host|target) evals\\))?
> on the line
> "\[\r\n\]+\[ \t\]+stop only if i == 1( \\((host|target) evals\\))?"
> originally made sense there but now it can be removed as it has no longer
> any functionality there - it will match now any trailing line garbage.
by Yao Qi:
In this test case, ( \\((host|target) evals\\))? isn't needed in the
pattern. What we test here is to save breakpoints into file and restore
them from file. The contents saved in file are:
break save-bp.c:31
condition $bpnum i == 1
the information about the place where the condition is evaluated isn't
saved, so we don't need to check. Breakpoint save and restore has
nothing to do with where the condition is evaluated (host or target). I
am fine to leave it here now.
gdb/testsuite/ChangeLog
2014-10-09 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/save-bp.exp (info break): Use gdb_test_sequence.
Alan Modra [Sat, 11 Oct 2014 23:00:42 +0000 (09:30 +1030)]
daily update
Iain Buclaw [Sat, 11 Oct 2014 09:29:10 +0000 (10:29 +0100)]
Sync libiberty with upstream GCC.
include/ChangeLog
* libiberty.h (PEX_STDOUT_APPEND): New flag.
(PEX_STDERR_APPEND): Likewise.
* demangle.h (DMGL_DLANG): New macro.
(DMGL_STYLE_MASK): Add DMGL_DLANG.
(demangling_styles): Add dlang_demangling.
(DLANG_DEMANGLING_STYLE_STRING): New macro.
(DLANG_DEMANGLING): New macro.
(dlang_demangle): New prototype.
* longlong.h: Add __udiv_w_sdiv prototype.
libiberty/ChangeLog
* cp-demangle.c (d_substitution): Handle abi tags on abbreviation.
* pex-common.h (struct pex_funcs): Add new parameter for open_write field.
* pex-unix.c (pex_unix_open_write): Add support for new parameter.
* pex-djgpp.c (pex_djgpp_open_write): Likewise.
* pex-win32.c (pex_win32_open_write): Likewise.
* pex-common.c (pex_run_in_environment): Likewise.
* Makefile.in (CFILES): Add d-demangle.c.
(REQUIRED_OFILES): Add d-demangle.o.
* cplus-dem.c (libiberty_demanglers): Add dlang_demangling case.
(cplus_demangle): Likewise.
* d-demangle.c: New file.
* testsuite/Makefile.in (really-check): Add check-d-demangle.
* testsuite/d-demangle-expected: New file.
* simple-object-elf.c (simple_object_elf_write_ehdr): Correctly
handle objects with more than SHN_LORESERVE sections.
(simple_object_elf_write_shdr): Add sh_link parameter.
(simple_object_elf_write_to_file): Correctly handle objects with
more than SHN_LORESERVE sections.
* cp-demangle.c (d_dump): Only access field from s_fixed part of
the union for DEMANGLE_COMPONENT_FIXED_TYPE.
(d_count_templates_scopes): Likewise.
* testsuite/demangler-fuzzer.c: New file.
* testsuite/Makefile.in (fuzz-demangler): New rule.
(demangler-fuzzer): Likewise.
(mostlyclean): Clean up demangler fuzzer.
Yao Qi [Wed, 8 Oct 2014 03:25:31 +0000 (11:25 +0800)]
Enable qTStatus packet in case it is disabled
Nowadays, we are using command "tstatus" to send a packet to GDBserver
in order to check the connection. However, on the target doesn't
support tracepoint, the following error is emitted before sending any
packet to GDBserver.
tstatus^M
Trace can not be run on this target.^M
(gdb) FAIL: gdb.server/server-kill.exp: tstatus
qTStatus is disabled after receiving the empty reply during connecting
to the remote target. When the test executes command "tstatus" again,
remote_get_trace_status returns -1 at the very beginning, and no RSP
packet is sent out.
This patch is to enable qTStatus packet again.
gdb/testsuite:
2014-10-11 Yao Qi <yao@codesourcery.com>
* gdb.server/server-kill.exp: Execute command
"set remote trace-status-packet on" before "tstatus".
Yao Qi [Tue, 30 Sep 2014 13:08:15 +0000 (21:08 +0800)]
Get GDBserver pid on remote target
Hi,
We see the following fail in the real remote testing...
(gdb) Executing on target: kill -9 29808 (timeout = 300)
spawn [open ...]^M
sh: 1: kill: No such process
The test tries to kill gdbserver in this way:
set server_pid [exp_pid -i [board_info target fileid]]
remote_exec target "kill -9 $server_pid"
in native testing, we'll get the pid of spawned gdbserver, however, in
remote testing, we'll get the pid of ssh session, since we start
gdbserver on the remote target through ssh. The pid on build doesn't
exist on target.
In this patch, we tweak server-kill.c to get the parent pid, which is
the pid of GDBserver. GDB gets it and kill GDBserver on target.
gdb/testsuite:
2014-10-11 Yao Qi <yao@codesourcery.com>
* gdb.server/server-kill.c: Include sys/types.h and unistd.h.
(main): Call getppid.
* gdb.server/server-kill.exp: Set breakpoint on line "i = 0;"
and continue to it. Read variable "server_pid".
Yao Qi [Wed, 8 Oct 2014 02:04:22 +0000 (10:04 +0800)]
Clean up server-kill.exp
This patch is to remove some lines which looks unnecessary. These
lines were added when server-kill.exp was added. In the version 1,
https://sourceware.org/ml/gdb-patches/2013-03/msg00691.html the test
calls runto_main and delete breakpoint on main,
+if ![runto_main] {
+ return -1
+}
+
+# Otherwise the breakpoint at 'main' would not cause insert
breakpoints during
+# first step.
+delete_breakpoints
However, in the version 2
https://sourceware.org/ml/gdb-patches/2013-03/msg00854.html runto_main
is removed but delete_breakpoints is still there. AFAICS, the line of
delete_breakpoints can be removed too.
gdb/testsuite:
2014-10-11 Yao Qi <yao@codesourcery.com>
* gdb.server/server-kill.exp: Remove "delete_breakpoints".
Yao Qi [Wed, 8 Oct 2014 14:26:27 +0000 (22:26 +0800)]
No longer pull thread list explicitly
As the result of the patch below, GDB updates thread list when a stop is
presented to user. The tests don't have to fetch thread list explicitly.
[PATCH 3/3] Fix non-stop regressions caused by "breakpoints always-inserted off" changes
https://sourceware.org/ml/gdb-patches/2014-09/msg00734.html
This patch is to remove the test code updating thread list.
Run these three tests many times on arm-linux-gnueabi and x86-linux.
No regressions.
gdb/testsuite:
2014-10-11 Yao Qi <yao@codesourcery.com>
* gdb.threads/thread-find.exp: Don't execute command
"info threads".
* gdb.threads/attach-into-signal.exp (corefunc): Likewise.
* gdb.threads/linux-dp.exp: Don't check the condition
$threads_created equals to zero.
Alan Modra [Fri, 10 Oct 2014 23:00:49 +0000 (09:30 +1030)]
daily update
Pedro Alves [Fri, 10 Oct 2014 17:18:52 +0000 (18:18 +0100)]
Delete IRIX support
This does most of the mechanical removal. IOW, the easy part.
This doesn't touch procfs.c as that'd be a harder excision,
potentially affecting Solaris.
mips-tdep.c is left alone. E.g., I didn't delete the GDB_OSABI_IRIX
enum value, nor references to it in mips-tdep.c. Some comments
mentioning IRIX ABIs may still be relevant and I wouldn't know what to
do with them. in That can always be done on a separate pass,
preferably by someone who can test on MIPS.
I didn't remove a reference to IRIX in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.
Built and tested on x86_64 Fedora 20, with --enable-targets=all.
Tested that building for --target=mips-sgi-irix6 on x86_64 Fedora 20
fails with:
checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
*** Configuration mips-sgi-irix6 is obsolete.
*** Support has been REMOVED.
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `/home/pedro/gdb/mygit/build-irix'
make: *** [all] Error 2
gdb/
2014-10-10 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_TARGET_OBS): Remove mips-irix-tdep.o and solib-irix.o.
(ALLDEPFILES): Remove mips-irix-tdep.c and solib-irix.c.
(HFILES_NO_SRCDIR): Remove solib-irix.h.
* NEWS: Mention that support for mips-sgi-irix5* mips-sgi-irix6*
and been removed.
* config/mips/irix5.mh, config/mips/irix6.mh: Delete files.
* configure.ac: Remove references to IRIX.
* configure.host: Add *-*-irix* to the obsolete hosts section.
Remove all other references to irix.
* irix5-nat.c, mips-irix-tdep.c, solib-irix.c, solib-irix.h:
Delete files.
gdb/testsuite/
2014-10-10 Pedro Alves <palves@redhat.com>
* gdb.base/bigcore.exp: Remove references to IRIX.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/mips_pro.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/setvar.exp: Likewise.
* lib/gdb.exp (gdb_compile_shlib): Remove mips-sgi-irix* case.
Ajit Kumar Agarwal [Fri, 10 Oct 2014 17:07:06 +0000 (18:07 +0100)]
Microblaze: Reject invalid target descriptions
We currently validate the target description, but then forget to
reject it if found invalid.
Tested that incorrect descriptions are rejected and GDB warns about
them.
Tested the Microblaze Design with and without stack-protect registers.
The gdb command "info registers" displayed the register correctly. If
a stack protect design is not selected, only core registers are
displayed. When the stack-protect registers are selected in the
design, the core registers along with stack-protect registers are
displayed.
gdb/
2014-10-10 Ajit Agarwal <ajitkum@xilinx.com>
* microblaze-tdep.c (microblaze_gdbarch_init): If the description
isn't valid, release the tdesc arch data and return NULL.
Pedro Alves [Fri, 10 Oct 2014 14:57:14 +0000 (15:57 +0100)]
Cache the vsyscall/vDSO range per-inferior
We're now doing a vsyscall/vDSO address range lookup whenever we fetch
shared libraries, either through an explicit "info shared", or when
the target reports new libraries have been loaded, in order to filter
out the vDSO from glibc's DSO list. Before we started doing that, GDB
would only ever lookup the vsyscall's address range once in the
process's lifetime.
Looking up the vDSO address range requires an auxv lookup (which is
already cached, so no problem), but also reading the process's
mappings from /proc to find out the vDSO's mapping's size. That
generates extra RSP traffic when remote debugging. Particularly
annoying when the process's mappings grow linearly as more libraries
are mapped in, and we went through the trouble of making incremental
DSO list updates work against gdbserver (when the probes-based dynamic
linker interface is available).
The vsyscall/vDSO is mapped by the kernel when the process is
initially mapped in, and doesn't change throughout the process's
lifetime, so we can cache its address range.
Caching at this level brings GDB back to one and only one vsyscall
address range lookup per process.
Tested on x86_64 Fedora 20.
gdb/
2014-10-10 Pedro Alves <palves@redhat.com>
* linux-tdep.c: Include observer.h.
(linux_inferior_data): New global.
(struct linux_info): New structure.
(invalidate_linux_cache_inf, linux_inferior_data_cleanup)
(get_linux_inferior_data): New functions.
(linux_vsyscall_range): Rename to ...
(linux_vsyscall_range_raw): ... this.
(linux_vsyscall_range): New function; handles caching.
(_initialize_linux_tdep): Register linux_inferior_data. Install
inferior_exit and inferior_appeared observers.
Pedro Alves [Fri, 10 Oct 2014 14:57:13 +0000 (15:57 +0100)]
PR symtab/14466: Work around PR libc/13097 "linux-vdso.so.1"
With upstream glibc, GDB prints:
warning: Could not load shared library symbols for linux-vdso.so.1.
Do you need "set solib-search-path" or "set sysroot"?
A bug's been filed for glibc a few years back:
http://sourceware.org/bugzilla/show_bug.cgi?id=13097
but it's still not resolved. It's not clear whether there's even
consensus that this is indeed a glibc bug. It would actually be nice
if GDB also listed the vDSO in the shared library list, but there are
some design considerations with that:
- the vDSO is mapped by the kernel, not userspace, therefore we
should load its symbols right from the process's start of life,
even before glibc / the userspace loader sets up the initial DSO
list. The program might even be using a custom loader or no
loader.
- that kind of hints at that solib.c should handle retrieving shared
library lists from more than one source, and that symfile-mem.c's
loading of the vDSO would be converted to load and relocate the
vDSO's bfd behind the target_so_ops interface.
- and then, once glibc links in the vDSO to its DSO list, we'd need
to either:
a) somehow hand over the vDSO from one target_so_ops to the other
b) simply keep hiding glibc's entry.
And then b) seems the simplest.
With that in mind, this patch simply discards the vDSO from glibc's
reported shared library list.
We can match the vDSO address range with the addresses found iterating
the dynamic linker list, to tell which dynamic linker entry is the
vDSO.
Tested on x86_64 Fedora 20.
gdb/
2014-10-10 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
PR symtab/14466
* solib-svr4.c (svr4_read_so_list): Rename to ...
(svr4_current_sos_1): ... this and change the function comment.
(svr4_current_sos): New function.
gdb/testsuite/
2014-10-10 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
PR symtab/14466
* gdb.base/vdso-warning.c: New file.
* gdb.base/vdso-warning.exp: New file.
Pedro Alves [Fri, 10 Oct 2014 14:57:13 +0000 (15:57 +0100)]
Split vDSO range lookup to a gdbarch hook
We have a case in solib-svr4.c where we could reuse symfile-mem.c's
vDSO range lookup. Since symfile-mem.c is not present in all
configurations solib-svr4.c is, move that lookup to a gdbarch hook.
This has the minor (good) side effect that we stop even trying the
target_auxv_search lookup against targets that don't have a concept of
a vDSO, in case symfile-mem.c happens to be linked in the build
(--enable-targets=all).
Tested on x86_64 Fedora 20.
gdb/
2014-10-10 Pedro Alves <palves@redhat.com>
* arch-utils.c (default_vsyscall_range): New function.
* arch-utils.h (default_vsyscall_range): New declaration.
* gdbarch.sh (vsyscall_range): New hook.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.c (linux_vsyscall_range): New function.
(linux_init_abi): Install linux_vsyscall_range as
vsyscall_range gdbarch hook.
* memrange.c (address_in_mem_range): New function.
* memrange.h (address_in_mem_range): New declaration.
* symfile-mem.c (find_vdso_size): Delete function.
(add_vsyscall_page): Use gdbarch_vsyscall_range.
Pedro Alves [Fri, 10 Oct 2014 12:50:05 +0000 (13:50 +0100)]
infrun.c:normal_stop: Fix typo in comment
gdb/
2014-10-10 Pedro Alves <palves@redhat.com>
* infrun.c (normal_stop): Fix typo in comment.
Alan Modra [Thu, 9 Oct 2014 23:00:36 +0000 (09:30 +1030)]
daily update