Cai Huoqing [Tue, 27 Jul 2021 05:40:32 +0000 (07:40 +0200)]
media: s3c-camif: Remove unused including <linux/version.h>
Remove including <linux/version.h> that don't need it.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Seongyong Park [Tue, 8 Jun 2021 15:24:50 +0000 (17:24 +0200)]
media: video-i2c: more precise intervals between frames
MLX90640 should ideally be working without a frame skip.
In short, if a frame is skipped, then half of a frame loses correction
information, having no way to retrieve its original compensation.
This patch improves the timing in three ways:
1) Replaced schedule_timeout_interruptible() to usleep_range()
The former "only ensures that it will sleep for at least
schedule_delay (if not interrupted)", as pointed out by mchehab.
As a result, the frame rate could lag behind than the actual capability
of the hardware
(Raspberry Pi would show a few Hz slower than set value)
2) Calculation based on us, not jiffies
Jiffies usually has resolution of 100Hz, and possibly even cruder.
MLX90640 can go up to 64Hz frame rate, which does not make sense to
calculate the interval with aforementioned resolution.
3) Interval calculation based on the last frame's end time
Using the start time of the current frame will probably make tiny bit
of drift every time. This made more sense when I didn't realize 1),
but it still makes sense without adding virtually any complexity,
so this stays in.
Signed-off-by: Seongyong Park <euphoriccatface@gmail.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Deepak R Varma [Sat, 1 May 2021 06:44:24 +0000 (08:44 +0200)]
media: staging: media: atomisp: code formatting changes atomisp_csi2.c
Several trivial code reformatting changes done according to the coding
style guidelines. These changes improves code organisation and readability
and also 4 address many chackpatch error, warning and check complaints.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 9 Sep 2021 11:24:30 +0000 (13:24 +0200)]
media: videobuf2: handle non-contiguous DMA allocations
This adds support for the new noncontiguous DMA API, which
requires allocators to have two execution branches: one
for the current API, and one for the new one.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 9 Sep 2021 11:24:29 +0000 (13:24 +0200)]
media: videobuf2: handle V4L2_MEMORY_FLAG_NON_COHERENT flag
This patch lets user-space request a non-coherent memory
allocation during CREATE_BUFS and REQBUFS ioctl calls.
= CREATE_BUFS
struct v4l2_create_buffers has seven 4-byte reserved areas,
so reserved[0] is renamed to ->flags. The struct, thus, now
has six reserved 4-byte regions.
= CREATE_BUFS32
struct v4l2_create_buffers32 has seven 4-byte reserved areas,
so reserved[0] is renamed to ->flags. The struct, thus, now
has six reserved 4-byte regions.
= REQBUFS
We use one byte of a 4 byte ->reserved[1] member of struct
v4l2_requestbuffers. The struct, thus, now has reserved 3 bytes.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 9 Sep 2021 11:24:28 +0000 (13:24 +0200)]
media: videobuf2: add queue memory coherency parameter
Preparations for future V4L2_MEMORY_FLAG_NON_COHERENT support.
Extend the vb2_core_reqbufs() parameters list to accept requests'
->flags, which will be used for memory coherency configuration.
An attempt to allocate a buffer with coherency requirements
that do not match the queue's consistency model will fail.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 9 Sep 2021 11:24:27 +0000 (13:24 +0200)]
media: videobuf2: add V4L2_MEMORY_FLAG_NON_COHERENT flag
By setting or clearing the V4L2_MEMORY_FLAG_NON_COHERENT flag
user-space should be able to hint vb2 that either non-coherent
(if supported) or coherent memory should be used for the buffer
allocation.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 9 Sep 2021 11:24:26 +0000 (13:24 +0200)]
media: videobuf2: move cache_hints handling to allocators
This moves cache hints handling from the videobuf2 core down
to the allocator's level, because allocators do the sync/flush
caches eventually and may take better decisions. Besides,
allocators already decide whether cache sync/flush should
be done or can be skipped. This patch moves the scattered
buffer cache sync logic to one common place.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 9 Sep 2021 11:24:25 +0000 (13:24 +0200)]
media: videobuf2: split buffer cache_hints initialisation
V4L2 is not the perfect place to manage vb2 buffer cache hints.
It works for V4L2 users, but there are backends that use vb2 core
and don't use V4L2. Factor out buffer cache hints initialisation
and call it when we allocate vb2 buffer.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 9 Sep 2021 11:24:24 +0000 (13:24 +0200)]
media: videobuf2: inverse buffer cache_hints flags
It would be less error prone if the default cache hints value
(we kzalloc() structs, so it's zeroed out by default) would be
to "always sync/flush" caches. Inverse and rename cache hints
flags.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 9 Sep 2021 11:24:23 +0000 (13:24 +0200)]
media: videobuf2: rework vb2_mem_ops API
With the new DMA API we need an extension of the videobuf2 API.
Previously, videobuf2 core would set the non-coherent DMA bit
in the vb2_queue dma_attr field (if user-space would pass a
corresponding memory hint); the vb2 core then would pass the
vb2_queue dma_attrs to the vb2 allocators. The vb2 allocator
would use the queue's dma_attr and the DMA API would allocate
either coherent or non-coherent memory.
But we cannot do this anymore, since there is no corresponding DMA
attr flag and, hence, there is no way for the allocator to become
aware of what type of allocation user-space has requested. So we
need to pass more context from videobuf2 core to the allocators.
Fix this by changing the call_ptr_memop() macro to pass the
vb2 pointer to the corresponding op callbacks.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Robert Foss [Thu, 12 Aug 2021 09:21:52 +0000 (11:21 +0200)]
media: camss: vfe: Don't call hw_version() before its dependencies are met
vfe->ops->hw_version(vfe) is being called before vfe->base has been
assigned, and before the hardware has been powered up.
Fixes:
b10b5334528a9 ("media: camss: vfe: Don't read hardware version needlessly")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Chad Fraleigh [Sun, 29 Aug 2021 23:51:27 +0000 (01:51 +0200)]
media: gspca: Limit frame size to sizeimage.
Limit frame size to what userland code expects. This can happen when
cameras, such as Kensington VideoCAM, use fixed sized transfer packets
which includes trailing junk in the final packet.
Signed-off-by: Chad Fraleigh <chadf@triularity.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fabio Estevam [Thu, 26 Aug 2021 18:38:19 +0000 (20:38 +0200)]
media: imx: TODO: Remove items that are already supported
Video capture has been successfully tested using an OV5640 parallel
sensor on a imx6ull-evk board at a 640x480 resolution and UYVY8_2X8
format.
Remove the two items that are no longer pending.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fabio Estevam [Thu, 26 Aug 2021 18:38:18 +0000 (20:38 +0200)]
media: imx7.rst: Provide an example for imx6ull-evk capture
imx6ull-evk has a parallel OV5640 sensor.
Provide an example for imx6ull-evk capture to improve the document.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Deborah Brouwer [Thu, 26 Aug 2021 03:44:11 +0000 (05:44 +0200)]
media: vivid: add signal-free time for cec message xfer
Currently, the vivid emulation of cec message transmission does not force
adapters to wait until the cec bus has been signal-free for a certain
number of bit periods before transmitting or re-transmitting a message.
Without enforcing the signal-free time requirements, adapters do not share
the bus very well and some messages are sent too quickly while other
messages are lost. By emulating a signal-free time and forcing adapters
to wait their turn to transmit, the vivid emulation of cec transmission
is much more reliable.
Signed-off-by: Deborah Brouwer <deborahbrouwer3563@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ezequiel Garcia [Wed, 25 Aug 2021 00:23:37 +0000 (02:23 +0200)]
media: Request API is no longer experimental
The Request API is currently used and specified as part of the
Memory-to-memory Stateless Video Decoder Interface [1].
This can now be considered as non-experimental and stable, given
the decoder API has been used by products since a couple years,
supported by several drivers and userspace frameworks,
[1] Documentation/userspace-api/media/v4l/dev-stateless-decoder.rst
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Mon, 23 Aug 2021 12:29:56 +0000 (14:29 +0200)]
media: vim2m: Remove repeated verbose license text
remove it because SPDX-License-Identifier is already used
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Christophe JAILLET [Sun, 22 Aug 2021 09:30:08 +0000 (11:30 +0200)]
media: switch from 'pci_' to 'dma_' API
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below.
It has been compile tested.
@@
@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@
@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@
@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
@@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Christophe JAILLET [Sat, 21 Aug 2021 21:54:22 +0000 (23:54 +0200)]
media: pci/ivtv: switch from 'pci_' to 'dma_' API
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below.
It has been compile tested.
No memory allocation in involved in this patch, so no GFP_ tweak is needed.
@@ @@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@ @@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@ @@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@ @@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Christophe JAILLET [Sat, 21 Aug 2021 11:12:53 +0000 (13:12 +0200)]
media: imx-jpeg: Fix the error handling path of 'mxc_jpeg_probe()'
A successful 'mxc_jpeg_attach_pm_domains()' call should be balanced by a
corresponding 'mxc_jpeg_detach_pm_domains()' call in the error handling
path of the probe, as already done in the remove function.
Update the error handling path accordingly.
Fixes:
2db16c6ed72c ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Christophe JAILLET [Thu, 19 Aug 2021 20:21:25 +0000 (22:21 +0200)]
media: mtk-vpu: Fix a resource leak in the error handling path of 'mtk_vpu_probe()'
A successful 'clk_prepare()' call should be balanced by a corresponding
'clk_unprepare()' call in the error handling path of the probe, as already
done in the remove function.
Update the error handling path accordingly.
Fixes:
3003a180ef6b ("[media] VPU: mediatek: support Mediatek VPU")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tom Rix [Wed, 18 Aug 2021 19:41:05 +0000 (21:41 +0200)]
media: camss: vfe: simplify vfe_get_wm_sizes()
Static analysis reports this representative problem
camss-vfe-4-1.c:333: The result of the left shift is undefined because
the left operand is negative
reg |= (height - 1) << 4;
~~~~~~~~~ ^
The is a false positive. height is set in vfe_get_wm_sizes() which
has a switch statement without a default.
Reviewing the switch, the cases contain redundant assignments.
So simplify to assignments.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Nil Yi [Sun, 15 Aug 2021 09:49:23 +0000 (11:49 +0200)]
media: usb: airspy: clean the freed pointer and counter
After urb was freed, the pointer and counter need to be
cleaned.
Signed-off-by: Nil Yi <teroincn@163.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tom Rix [Thu, 12 Aug 2021 17:00:43 +0000 (19:00 +0200)]
media: TDA1997x: handle short reads of hdmi info frame.
Static analysis reports this representative problem
tda1997x.c:1939: warning: 7th function call argument is an uninitialized
value
The 7th argument is buffer[0], which is set in the earlier call to
io_readn(). When io_readn() call to io_read() fails with the first
read, buffer[0] is not set and 0 is returned and stored in len.
The later call to hdmi_infoframe_unpack()'s size parameter is the
static size of buffer, always 40, so a short read is not caught
in hdmi_infoframe_unpacks()'s checking. The variable len should be
used instead.
Zero initialize buffer to 0 so it is in a known start state.
Fixes:
9ac0038db9a7 ("media: i2c: Add TDA1997x HDMI receiver driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Nadezda Lutovinova [Wed, 11 Aug 2021 13:32:28 +0000 (15:32 +0200)]
media: s5p-mfc: Add checking to s5p_mfc_probe().
If of_device_get_match_data() return NULL,
then null pointer dereference occurs in s5p_mfc_init_pm().
The patch adds checking if dev->variant is NULL.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Wed, 11 Aug 2021 11:36:54 +0000 (13:36 +0200)]
media: cec-pin: fix off-by-one SFT check
The CEC pin framework has to wait for the CEC bus to be idle for the
requested Signal Free Time before it can start a transmit.
However, the check for that was off by one, so transmits would start one
bit period (2.4ms) too late.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tuo Li [Thu, 5 Aug 2021 07:55:35 +0000 (09:55 +0200)]
media: s5p-mfc: fix possible null-pointer dereference in s5p_mfc_probe()
The variable pdev is assigned to dev->plat_dev, and dev->plat_dev is
checked in:
if (!dev->plat_dev)
This indicates both dev->plat_dev and pdev can be NULL. If so, the
function dev_err() is called to print error information.
dev_err(&pdev->dev, "No platform data specified\n");
However, &pdev->dev is an illegal address, and it is dereferenced in
dev_err().
To fix this possible null-pointer dereference, replace dev_err() with
mfc_err().
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Zev Weiss [Thu, 17 Jun 2021 22:02:29 +0000 (00:02 +0200)]
media: aspeed-video: ignore interrupts that aren't enabled
As partially addressed in commit
65d270acb2d6 ("media: aspeed: clear
garbage interrupts"), the ASpeed video engine sometimes asserts
interrupts that the driver hasn't enabled. In addition to the
CAPTURE_COMPLETE and FRAME_COMPLETE interrupts dealt with in that
patch, COMP_READY has also been observed. Instead of playing
whack-a-mole with each one individually, we can instead just blanket
ignore everything we haven't explicitly enabled.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Tested-by: Lei YU <yulei.sh@bytedance.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dan Carpenter [Mon, 7 Jun 2021 15:23:48 +0000 (17:23 +0200)]
media: firewire: firedtv-avc: fix a buffer overflow in avc_ca_pmt()
The bounds checking in avc_ca_pmt() is not strict enough. It should
be checking "read_pos + 4" because it's reading 5 bytes. If the
"es_info_length" is non-zero then it reads a 6th byte so there needs to
be an additional check for that.
I also added checks for the "write_pos". I don't think these are
required because "read_pos" and "write_pos" are tied together so
checking one ought to be enough. But they make the code easier to
understand for me. The check on write_pos is:
if (write_pos + 4 >= sizeof(c->operand) - 4) {
The first "+ 4" is because we're writing 5 bytes and the last " - 4"
is to leave space for the CRC.
The other problem is that "length" can be invalid. It comes from
"data_length" in fdtv_ca_pmt().
Cc: stable@vger.kernel.org
Reported-by: Luo Likang <luolikang@nsfocus.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
lijian [Fri, 28 May 2021 08:47:40 +0000 (10:47 +0200)]
media: via-camera: deleted these redundant semicolons
Macros should not use a trailing semicolon，and it was used
the semicolon after macro cam_dbg called in viacam_vb2_prepare,
so deleted these redundant semicolons.
Signed-off-by: lijian <lijian@yulong.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dafna Hirschfeld [Fri, 28 May 2021 08:36:41 +0000 (10:36 +0200)]
media: mtk-vcodec: venc: fix return value when start_streaming fails
In case vb2ops_venc_start_streaming fails, the error value
is overwritten by the ret value of pm_runtime_put which might
be 0. Fix it.
Fixes:
985c73693fe5a (" media: mtk-vcodec: Separating mtk encoder driver")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Liu Shixin [Thu, 27 May 2021 13:17:01 +0000 (15:17 +0200)]
media: pvrusb2: Replaced simple_strtol() with kstrtoint()
It looks like that memcpy() is a superfluous operation in
parse_token()/parse_mtoken(). Simple these two functions and
use kstrtoint() instead of simple_strtol() to avoid data
overflow.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Evgeny Novikov [Thu, 27 May 2021 09:26:24 +0000 (11:26 +0200)]
media: vidtv: Fix memory leak in remove
vidtv_bridge_remove() releases and cleans up everything except for dvb
itself. The patch adds this missed release.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 11:44:59 +0000 (13:44 +0200)]
media: rcar_drif: Make use of the helper function devm_platform_get_and_ioremap_resource()
Use the devm_platform_get_and_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:57:15 +0000 (07:57 +0200)]
media: xilinx: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:57:08 +0000 (07:57 +0200)]
media: vsp1: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:57:01 +0000 (07:57 +0200)]
media: venus: core : Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:56:53 +0000 (07:56 +0200)]
media: sunxi: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:56:45 +0000 (07:56 +0200)]
media: stm32-cec: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:56:38 +0000 (07:56 +0200)]
media: stih-cec: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:56:23 +0000 (07:56 +0200)]
media: sti: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:56:16 +0000 (07:56 +0200)]
media: s5p-mfc: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:56:09 +0000 (07:56 +0200)]
media: s5p-jpeg: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:56:01 +0000 (07:56 +0200)]
media: s5p-g2d: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:55:54 +0000 (07:55 +0200)]
media: s3c-camif: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:55:46 +0000 (07:55 +0200)]
media: rockchip: rga: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:55:39 +0000 (07:55 +0200)]
media: renesas-ceu: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:55:32 +0000 (07:55 +0200)]
media: rcar_jpu: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:55:24 +0000 (07:55 +0200)]
media: rcar_fdp1: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:55:09 +0000 (07:55 +0200)]
media: rcar-csi2: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:55:02 +0000 (07:55 +0200)]
media: rc: sunxi-cir: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:54:54 +0000 (07:54 +0200)]
media: rc: st_rc: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:54:47 +0000 (07:54 +0200)]
media: rc: mtk-cir: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:54:39 +0000 (07:54 +0200)]
media: rc: meson-ir: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:54:27 +0000 (07:54 +0200)]
media: rc: ir-hix5hd2: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:54:20 +0000 (07:54 +0200)]
media: rc: img-ir: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:54:03 +0000 (07:54 +0200)]
media: mx2_emmaprp: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:52:01 +0000 (07:52 +0200)]
media: mtk-jpeg: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:51:54 +0000 (07:51 +0200)]
media: meson: ge2d: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:51:46 +0000 (07:51 +0200)]
media: imx-pxp: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:51:38 +0000 (07:51 +0200)]
media: imx-jpeg: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:51:31 +0000 (07:51 +0200)]
media: exynos4-is: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:51:23 +0000 (07:51 +0200)]
media: exynos-gsc: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:51:16 +0000 (07:51 +0200)]
media: davinci: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:51:08 +0000 (07:51 +0200)]
media: coda: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:48:42 +0000 (07:48 +0200)]
media: cec: s5p_cec: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:45:35 +0000 (07:45 +0200)]
media: cec: ao-cec: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:14:20 +0000 (07:14 +0200)]
media: cadence: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Wed, 1 Sep 2021 05:07:24 +0000 (07:07 +0200)]
media: am437x: Make use of the helper function devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Fri, 18 Jun 2021 12:29:21 +0000 (14:29 +0200)]
media: uvcvideo: Don't spam the log in uvc_ctrl_restore_values()
Don't report the restored controls with dev_info, use dev_dbg instead.
This prevents a lot of noise in the kernel log.
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ricardo Ribalda [Fri, 18 Jun 2021 12:29:18 +0000 (14:29 +0200)]
media: docs: Document the behaviour of uvcvideo driver
The uvc driver relies on the camera firmware to keep the control states
and therefore is not capable of changing an inactive control.
Allow returning -EACCES in those cases.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ricardo Ribalda [Fri, 18 Jun 2021 12:29:17 +0000 (14:29 +0200)]
media: uvcvideo: Set error_idx during ctrl_commit errors
If we have an error setting a control, return the affected control in
the error_idx field.
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ricardo Ribalda [Fri, 18 Jun 2021 12:29:16 +0000 (14:29 +0200)]
media: uvcvideo: Check controls flags before accessing them
We can figure out if reading/writing a set of controls can fail without
accessing them by checking their flags.
This way we can honor the API closer:
If an error is found when validating the list of controls passed with
VIDIOC_G_EXT_CTRLS, then error_idx shall be set to ctrls->count to
indicate to userspace that no actual hardware was touched.
Fixes v4l2-compliance:
Control ioctls (Input 0):
warn: v4l2-test-controls.cpp(765): g_ext_ctrls(0) invalid error_idx 0
fail: v4l2-test-controls.cpp(645): invalid error index write only control
test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ricardo Ribalda [Fri, 18 Jun 2021 12:29:15 +0000 (14:29 +0200)]
media: uvcvideo: Use control names from framework
The framework already contains a map of IDs to names, lets use it when
possible.
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Suggested-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ricardo Ribalda [Fri, 18 Jun 2021 12:29:14 +0000 (14:29 +0200)]
media: uvcvideo: Increase the size of UVC_METADATA_BUF_SIZE
Hans has discovered that in his test device, for the H264 format
bytesused goes up to about 570, for YUYV it will actually go up
to a bit over 5000 bytes, and for MJPG up to about 2706 bytes.
We should also, according to V4L2_META_FMT_UVC docs, drop headers when
the buffer is full.
Credit-to: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ricardo Ribalda [Fri, 18 Jun 2021 12:29:13 +0000 (14:29 +0200)]
media: uvcvideo: Set unique vdev name based in type
All the entities must have a unique name. We can have a descriptive and
unique name by appending the function and the entity->id.
This is even resilent to multi chain devices.
Fixes v4l2-compliance:
Media Controller ioctls:
fail: v4l2-test-media.cpp(205): v2_entity_names_set.find(key) != v2_entity_names_set.end()
test MEDIA_IOC_G_TOPOLOGY: FAIL
fail: v4l2-test-media.cpp(394): num_data_links != num_links
test MEDIA_IOC_ENUM_ENTITIES/LINKS: FAIL
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ricardo Ribalda [Fri, 18 Jun 2021 12:29:12 +0000 (14:29 +0200)]
media: uvcvideo: Use dev->name for querycap()
Use the device name for the card name instead of vdev->name. That way
all the devices have a different name instead of the common vdev->name.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ricardo Ribalda [Fri, 18 Jun 2021 12:29:11 +0000 (14:29 +0200)]
media: uvcvideo: Add support for V4L2_CTRL_TYPE_CTRL_CLASS
Create all the class controls for the device defined controls.
Fixes v4l2-compliance:
Control ioctls (Input 0):
fail: v4l2-test-controls.cpp(216): missing control class for class
00980000
fail: v4l2-test-controls.cpp(216): missing control tclass for class
009a0000
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: FAIL
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ricardo Ribalda [Fri, 18 Jun 2021 12:29:10 +0000 (14:29 +0200)]
media: uvcvideo: refactor __uvc_ctrl_add_mapping
Pass the chain instead of the device. We want to keep the reference to
the chain that controls belong to.
We need to delay the initialization of the controls after the chains
have been initialized.
This is a cleanup needed for the next patches.
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ricardo Ribalda [Fri, 18 Jun 2021 12:29:09 +0000 (14:29 +0200)]
media: uvcvideo: Return -EIO for control errors
The device is doing something unexpected with the control. Either because
the protocol is not properly implemented or there has been a HW error.
Fixes v4l2-compliance:
Control ioctls (Input 0):
fail: v4l2-test-controls.cpp(448): s_ctrl returned an error (22)
test VIDIOC_G/S_CTRL: FAIL
fail: v4l2-test-controls.cpp(698): s_ext_ctrls returned an error (22)
test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ricardo Ribalda [Fri, 18 Jun 2021 12:29:08 +0000 (14:29 +0200)]
media: uvcvideo: Set capability in s_param
Fixes v4l2-compliance:
Format ioctls (Input 0):
warn: v4l2-test-formats.cpp(1339): S_PARM is supported but doesn't report V4L2_CAP_TIMEPERFRAME
fail: v4l2-test-formats.cpp(1241): node->has_frmintervals && !cap->capability
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ricardo Ribalda [Fri, 18 Jun 2021 12:29:07 +0000 (14:29 +0200)]
media: uvcvideo: Remove s_ctrl and g_ctrl
If we do not implement these callbacks the framework will call the
ext_ctrl callbaks instead, which are a superset of this functions.
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ricardo Ribalda [Fri, 18 Jun 2021 12:29:06 +0000 (14:29 +0200)]
media: v4l2-ioctl: S_CTRL output the right value
If the driver does not implement s_ctrl, but it does implement
s_ext_ctrls, we convert the call.
When that happens we have also to convert back the response from
s_ext_ctrls.
Fixes v4l2_compliance:
Control ioctls (Input 0):
fail: v4l2-test-controls.cpp(411): returned control value out of range
fail: v4l2-test-controls.cpp(507): invalid control
00980900
test VIDIOC_G/S_CTRL: FAIL
Fixes:
35ea11ff8471 ("V4L/DVB (8430): videodev: move some functions from v4l2-dev.h to v4l2-common.h or v4l2-ioctl.h")
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ricardo Ribalda [Fri, 18 Jun 2021 12:29:05 +0000 (14:29 +0200)]
media: uvcvideo: Do not check for V4L2_CTRL_WHICH_DEF_VAL
The framework already checks for us if V4L2_CTRL_WHICH_DEF_VAL is
written.
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ricardo Ribalda [Fri, 18 Jun 2021 12:29:04 +0000 (14:29 +0200)]
media: pvrusb2: Do not check for V4L2_CTRL_WHICH_DEF_VAL
The framework already checks for us if V4L2_CTRL_WHICH_DEF_VAL is
written.
Cc: Mike Isely <isely@pobox.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ricardo Ribalda [Fri, 18 Jun 2021 12:29:03 +0000 (14:29 +0200)]
media: v4l2-ioctl: Fix check_ext_ctrls
Drivers that do not use the ctrl-framework use this function instead.
Fix the following issues:
- Do not check for multiple classes when getting the DEF_VAL.
- Return -EINVAL for request_api calls
- Default value cannot be changed, return EINVAL as soon as possible.
- Return the right error_idx
[If an error is found when validating the list of controls passed with
VIDIOC_G_EXT_CTRLS, then error_idx shall be set to ctrls->count to
indicate to userspace that no actual hardware was touched.
It would have been much nicer of course if error_idx could point to the
control index that failed the validation, but sadly that's not how the
API was designed.]
Fixes v4l2-compliance:
Control ioctls (Input 0):
warn: v4l2-test-controls.cpp(834): error_idx should be equal to count
warn: v4l2-test-controls.cpp(855): error_idx should be equal to count
fail: v4l2-test-controls.cpp(813): doioctl(node, VIDIOC_G_EXT_CTRLS, &ctrls)
test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL
Buffer ioctls (Input 0):
fail: v4l2-test-buffers.cpp(1994): ret != EINVAL && ret != EBADR && ret != ENOTTY
test Requests: FAIL
Cc: stable@vger.kernel.org
Fixes:
6fa6f831f095 ("media: v4l2-ctrls: add core request support")
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cai Huoqing [Tue, 27 Jul 2021 09:28:53 +0000 (11:28 +0200)]
media: uvcvideo: Remove unused including <linux/version.h>
Remove including <linux/version.h> that don't need it.
V1->V2: Split the patch in two.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Bingbu Cao [Fri, 16 Jul 2021 08:06:28 +0000 (10:06 +0200)]
media: staging: document that Imgu not output auto-exposure statistics
Currently, Imgu can not support output the auto-exposure statistics into
ae_raw_buffer in 3A stats buffer, this patch document it.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
David Plowman [Mon, 16 Aug 2021 11:39:09 +0000 (13:39 +0200)]
media: v4l2-ctrls: Document V4L2_CID_NOTIFY_GAINS control
Add documentation for the V4L2_CID_NOTIFY_GAINS control.
This control is required by sensors that need to know what colour
gains will be applied to pixels by downstream processing (such as by
an ISP), though the sensor does not apply these gains itself.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
David Plowman [Mon, 16 Aug 2021 11:39:08 +0000 (13:39 +0200)]
media: v4l2-ctrls: Add V4L2_CID_NOTIFY_GAINS control
We add a new control V4L2_CID_NOTIFY_GAINS which allows the sensor to
be notified what gains will be applied to the different colour
channels by subsequent processing (such as by an ISP), even though the
sensor will not apply any of these gains itself.
For Bayer sensors this will be an array control taking 4 values which
are the 4 gains arranged in the fixed order B, Gb, Gr and R,
irrespective of the exact Bayer order of the sensor itself. The use of
an array makes it straightforward to extend this control to non-Bayer
sensors (for example, sensors with an RGBW pattern) in future.
The units are in all cases linear with the default value indicating a
gain of exactly 1.0. For example, if the default value were reported as
128 then the value 192 would represent a gain of exactly 1.5.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hsin-Yi Wang [Mon, 5 Jul 2021 08:17:24 +0000 (10:17 +0200)]
media: ov8856: Set default mbus format but allow caller to alter
Setting the value of V_WIN_OFF (0x3818) from 0x02 to 0x01 to use GRBG
format still results in wrong color output if data is tuned in BGGR mode
before.
Set default mbus format for the supported modes, but allow the caller of
set(get)_fmt to change the bayer format between BGGR and GRBG.
Set the default mbus format for 3264x2448 (and 1632x1224) to BGGR as the
data sheet states the value of this reg should be 0x02 by default.
If new modes are added in the future, they can add the
mipi_data_mbus_{format} settings into bayer_offset_configs to adjust their
offset regs.
Fixes:
2984b0ddd557 ("media: ov8856: Configure sensor for GRBG Bayer for all modes")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Arec Kao [Tue, 17 Aug 2021 04:46:07 +0000 (06:46 +0200)]
media: Add sensor driver support for the ov13b10 camera.
This driver supports following features:
- phase detection auto focus (PDAF)
- manual exposure and analog/digital gain control
- vblank/hblank control
- test pattern
- image vertical flip and horizontal mirror control
- 4208x3120 at 30FPS
- 2080x1170 at 60FPS
Signed-off-by: Arec Kao <arec.kao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sakari Ailus [Mon, 16 Aug 2021 13:08:59 +0000 (15:08 +0200)]
media: imx258: Fix getting clock frequency
Obtain the clock frequency by reading the clock-frequency property if
there's no clock.
Fixes:
9fda25332c4b ("media: i2c: imx258: get clock from device properties and enable it via runtime PM")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Andy Shevchenko [Tue, 13 Jul 2021 20:21:31 +0000 (22:21 +0200)]
media: ipu3-cio2: Introduce to_cio2_device() helper macro
Provide to_cio2_device() helper macro and convert users to make
code easier to read.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Andy Shevchenko [Tue, 13 Jul 2021 20:21:30 +0000 (22:21 +0200)]
media: ipu3-cio2: Introduce to_cio2_buffer() helper macro
Provide to_cio2_buffer() helper macro and convert users to make
code easier to read.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Andy Shevchenko [Tue, 13 Jul 2021 20:21:29 +0000 (22:21 +0200)]
media: ipu3-cio2: Introduce to_sensor_asd() helper macro
Provide to_sensor_asd() helper macro and convert users to make
code easier to read.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Andy Shevchenko [Tue, 13 Jul 2021 20:21:28 +0000 (22:21 +0200)]
media: ipu3-cio2: Switch to use media_entity_to_video_device()
V4L2 provides a few helper macros, in particular
media_entity_to_video_device(). Switch the driver
to use it instead of open-coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Andy Shevchenko [Tue, 13 Jul 2021 20:21:27 +0000 (22:21 +0200)]
media: ipu3-cio2: Use temporary storage for struct device pointer
Use temporary storage for struct device pointer to simplify the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Andy Shevchenko [Tue, 13 Jul 2021 20:21:26 +0000 (22:21 +0200)]
media: ipu3-cio2: Replace open-coded for_each_set_bit()
Use for_each_set_bit() instead of open-coding it to simplify the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
projects / platform / kernel / linux-starfive.git / log