David S. Miller [Sat, 2 Nov 2019 22:27:42 +0000 (15:27 -0700)]
Merge git://git./linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-11-02
The following pull-request contains BPF updates for your *net-next* tree.
We've added 30 non-merge commits during the last 7 day(s) which contain
a total of 41 files changed, 1864 insertions(+), 474 deletions(-).
The main changes are:
1) Fix long standing user vs kernel access issue by introducing
bpf_probe_read_user() and bpf_probe_read_kernel() helpers, from Daniel.
2) Accelerated xskmap lookup, from Björn and Maciej.
3) Support for automatic map pinning in libbpf, from Toke.
4) Cleanup of BTF-enabled raw tracepoints, from Alexei.
5) Various fixes to libbpf and selftests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 2 Nov 2019 20:12:51 +0000 (13:12 -0700)]
Merge git://git./linux/kernel/git/netdev/net
The only slightly tricky merge conflict was the netdevsim because the
mutex locking fix overlapped a lot of driver reload reorganization.
The rest were (relatively) trivial in nature.
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Sat, 2 Nov 2019 19:39:13 +0000 (12:39 -0700)]
Merge branch 'bpf_probe_read_user'
Daniel Borkmann says:
====================
This set adds probe_read_{user,kernel}(), probe_read_str_{user,kernel}()
helpers, fixes probe_write_user() helper and selftests. For details please
see individual patches.
Thanks!
v2 -> v3:
- noticed two more things that are fixed in here:
- bpf uapi helper description used 'int size' for *_str helpers, now u32
- we need TASK_SIZE_MAX + guard page on x86-64 in patch 2 otherwise
we'll trigger the
00c42373d397 warn as well, so full range covered now
v1 -> v2:
- standardize unsafe_ptr terminology in uapi header comment (Andrii)
- probe_read_{user,kernel}[_str] naming scheme (Andrii)
- use global data in last test case, remove relaxed_maps (Andrii)
- add strict non-pagefault kernel read funcs to avoid warning in
kernel probe read helpers (Alexei)
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Fri, 1 Nov 2019 23:18:03 +0000 (00:18 +0100)]
bpf, testing: Add selftest to read/write sockaddr from user space
Tested on x86-64 and Ilya was also kind enough to give it a spin on
s390x, both passing with probe_user:OK there. The test is using the
newly added bpf_probe_read_user() to dump sockaddr from connect call
into .bss BPF map and overrides the user buffer via bpf_probe_write_user():
# ./test_progs
[...]
#17 pkt_md_access:OK
#18 probe_user:OK
#19 prog_run_xattr:OK
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/90f449d8af25354e05080e82fc6e2d3179da30ea.1572649915.git.daniel@iogearbox.net
Daniel Borkmann [Fri, 1 Nov 2019 23:18:02 +0000 (00:18 +0100)]
bpf, testing: Convert prog tests to probe_read_{user, kernel}{, _str} helper
Use probe read *_{kernel,user}{,_str}() helpers instead of bpf_probe_read()
or bpf_probe_read_user_str() for program tests where appropriate.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/4a61d4b71ce3765587d8ef5cb93afa18515e5b3e.1572649915.git.daniel@iogearbox.net
Daniel Borkmann [Fri, 1 Nov 2019 23:18:01 +0000 (00:18 +0100)]
bpf, samples: Use bpf_probe_read_user where appropriate
Use bpf_probe_read_user() helper instead of bpf_probe_read() for samples that
attach to kprobes probing on user addresses.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/5b0144b3f8e031ec5e2438bd7de8d7877e63bf2f.1572649915.git.daniel@iogearbox.net
Daniel Borkmann [Fri, 1 Nov 2019 23:18:00 +0000 (00:18 +0100)]
bpf: Switch BPF probe insns to bpf_probe_read_kernel
Commit
2a02759ef5f8 ("bpf: Add support for BTF pointers to interpreter")
explicitly states that the pointer to BTF object is a pointer to a kernel
object or NULL. Therefore we should also switch to using the strict kernel
probe helper which is restricted to kernel addresses only when architectures
have non-overlapping address spaces.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/d2b90827837685424a4b8008dfe0460558abfada.1572649915.git.daniel@iogearbox.net
Daniel Borkmann [Fri, 1 Nov 2019 23:17:59 +0000 (00:17 +0100)]
bpf: Add probe_read_{user, kernel} and probe_read_{user, kernel}_str helpers
The current bpf_probe_read() and bpf_probe_read_str() helpers are broken
in that they assume they can be used for probing memory access for kernel
space addresses /as well as/ user space addresses.
However, plain use of probe_kernel_read() for both cases will attempt to
always access kernel space address space given access is performed under
KERNEL_DS and some archs in-fact have overlapping address spaces where a
kernel pointer and user pointer would have the /same/ address value and
therefore accessing application memory via bpf_probe_read{,_str}() would
read garbage values.
Lets fix BPF side by making use of recently added
3d7081822f7f ("uaccess:
Add non-pagefault user-space read functions"). Unfortunately, the only way
to fix this status quo is to add dedicated bpf_probe_read_{user,kernel}()
and bpf_probe_read_{user,kernel}_str() helpers. The bpf_probe_read{,_str}()
helpers are kept as-is to retain their current behavior.
The two *_user() variants attempt the access always under USER_DS set, the
two *_kernel() variants will -EFAULT when accessing user memory if the
underlying architecture has non-overlapping address ranges, also avoiding
throwing the kernel warning via
00c42373d397 ("x86-64: add warning for
non-canonical user access address dereferences").
Fixes:
a5e8c07059d0 ("bpf: add bpf_probe_read_str helper")
Fixes:
2541517c32be ("tracing, perf: Implement BPF programs attached to kprobes")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/796ee46e948bc808d54891a1108435f8652c6ca4.1572649915.git.daniel@iogearbox.net
Daniel Borkmann [Fri, 1 Nov 2019 23:17:58 +0000 (00:17 +0100)]
bpf: Make use of probe_user_write in probe write helper
Convert the bpf_probe_write_user() helper to probe_user_write() such that
writes are not attempted under KERNEL_DS anymore which is buggy as kernel
and user space pointers can have overlapping addresses. Also, given we have
the access_ok() check inside probe_user_write(), the helper doesn't need
to do it twice.
Fixes:
96ae52279594 ("bpf: Add bpf_probe_write_user BPF helper to be called in tracers")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/841c461781874c07a0ee404a454c3bc0459eed30.1572649915.git.daniel@iogearbox.net
Daniel Borkmann [Fri, 1 Nov 2019 23:17:57 +0000 (00:17 +0100)]
uaccess: Add strict non-pagefault kernel-space read function
Add two new probe_kernel_read_strict() and strncpy_from_unsafe_strict()
helpers which by default alias to the __probe_kernel_read() and the
__strncpy_from_unsafe(), respectively, but can be overridden by archs
which have non-overlapping address ranges for kernel space and user
space in order to bail out with -EFAULT when attempting to probe user
memory including non-canonical user access addresses [0]:
4-level page tables:
user-space mem: 0x0000000000000000 - 0x00007fffffffffff
non-canonical: 0x0000800000000000 - 0xffff7fffffffffff
5-level page tables:
user-space mem: 0x0000000000000000 - 0x00ffffffffffffff
non-canonical: 0x0100000000000000 - 0xfeffffffffffffff
The idea is that these helpers are complementary to the probe_user_read()
and strncpy_from_unsafe_user() which probe user-only memory. Both added
helpers here do the same, but for kernel-only addresses.
Both set of helpers are going to be used for BPF tracing. They also
explicitly avoid throwing the splat for non-canonical user addresses from
00c42373d397 ("x86-64: add warning for non-canonical user access address
dereferences").
For compat, the current probe_kernel_read() and strncpy_from_unsafe() are
left as-is.
[0] Documentation/x86/x86_64/mm.txt
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: x86@kernel.org
Link: https://lore.kernel.org/bpf/eefeefd769aa5a013531f491a71f0936779e916b.1572649915.git.daniel@iogearbox.net
Daniel Borkmann [Fri, 1 Nov 2019 23:17:56 +0000 (00:17 +0100)]
uaccess: Add non-pagefault user-space write function
Commit
3d7081822f7f ("uaccess: Add non-pagefault user-space read functions")
missed to add probe write function, therefore factor out a probe_write_common()
helper with most logic of probe_kernel_write() except setting KERNEL_DS, and
add a new probe_user_write() helper so it can be used from BPF side.
Again, on some archs, the user address space and kernel address space can
co-exist and be overlapping, so in such case, setting KERNEL_DS would mean
that the given address is treated as being in kernel address space.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/bpf/9df2542e68141bfa3addde631441ee45503856a8.1572649915.git.daniel@iogearbox.net
Alexei Starovoitov [Sat, 2 Nov 2019 19:35:07 +0000 (12:35 -0700)]
Merge branch 'map-pinning'
Toke Høiland-Jørgensen says:
====================
This series adds support to libbpf for reading 'pinning' settings from BTF-based
map definitions. It introduces a new open option which can set the pinning path;
if no path is set, /sys/fs/bpf is used as the default. Callers can customise the
pinning between open and load by setting the pin path per map, and still get the
automatic reuse feature.
The semantics of the pinning is similar to the iproute2 "PIN_GLOBAL" setting,
and the eventual goal is to move the iproute2 implementation to be based on
libbpf and the functions introduced in this series.
Changelog:
v6:
- Fix leak of struct bpf_object in selftest
- Make struct bpf_map arg const in bpf_map__is_pinned() and bpf_map__get_pin_path()
v5:
- Don't pin maps with pinning set, but with a value of LIBBPF_PIN_NONE
- Add a few more selftests:
- Should not pin map with pinning set, but value LIBBPF_PIN_NONE
- Should fail to load a map with an invalid pinning value
- Should fail to re-use maps with parameter mismatch
- Alphabetise libbpf.map
- Whitespace and typo fixes
v4:
- Don't check key_type_id and value_type_id when checking for map reuse
compatibility.
- Move building of map->pin_path into init_user_btf_map()
- Get rid of 'pinning' attribute in struct bpf_map
- Make sure we also create parent directory on auto-pin (new patch 3).
- Abort the selftest on error instead of attempting to continue.
- Support unpinning all pinned maps with bpf_object__unpin_maps(obj, NULL)
- Support pinning at map->pin_path with bpf_object__pin_maps(obj, NULL)
- Make re-pinning a map at the same path a noop
- Rename the open option to pin_root_path
- Add a bunch more self-tests for pin_maps(NULL) and unpin_maps(NULL)
- Fix a couple of smaller nits
v3:
- Drop bpf_object__pin_maps_opts() and just use an open option to customise
the pin path; also don't touch bpf_object__{un,}pin_maps()
- Integrate pinning and reuse into bpf_object__create_maps() instead of having
multiple loops though the map structure
- Make errors in map reuse and pinning fatal to the load procedure
- Add selftest to exercise pinning feature
- Rebase series to latest bpf-next
v2:
- Drop patch that adds mounting of bpffs
- Only support a single value of the pinning attribute
- Add patch to fixup error handling in reuse_fd()
- Implement the full automatic pinning and map reuse logic on load
====================
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Toke Høiland-Jørgensen [Sat, 2 Nov 2019 11:09:42 +0000 (12:09 +0100)]
selftests: Add tests for automatic map pinning
This adds a new BPF selftest to exercise the new automatic map pinning
code.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157269298209.394725.15420085139296213182.stgit@toke.dk
Toke Høiland-Jørgensen [Sat, 2 Nov 2019 11:09:41 +0000 (12:09 +0100)]
libbpf: Add auto-pinning of maps when loading BPF objects
This adds support to libbpf for setting map pinning information as part of
the BTF map declaration, to get automatic map pinning (and reuse) on load.
The pinning type currently only supports a single PIN_BY_NAME mode, where
each map will be pinned by its name in a path that can be overridden, but
defaults to /sys/fs/bpf.
Since auto-pinning only does something if any maps actually have a
'pinning' BTF attribute set, we default the new option to enabled, on the
assumption that seamless pinning is what most callers want.
When a map has a pin_path set at load time, libbpf will compare the map
pinned at that location (if any), and if the attributes match, will re-use
that map instead of creating a new one. If no existing map is found, the
newly created map will instead be pinned at the location.
Programs wanting to customise the pinning can override the pinning paths
using bpf_map__set_pin_path() before calling bpf_object__load() (including
setting it to NULL to disable pinning of a particular map).
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157269298092.394725.3966306029218559681.stgit@toke.dk
Toke Høiland-Jørgensen [Sat, 2 Nov 2019 11:09:39 +0000 (12:09 +0100)]
libbpf: Move directory creation into _pin() functions
The existing pin_*() functions all try to create the parent directory
before pinning. Move this check into the per-object _pin() functions
instead. This ensures consistent behaviour when auto-pinning is
added (which doesn't go through the top-level pin_maps() function), at the
cost of a few more calls to mkdir().
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157269297985.394725.5882630952992598610.stgit@toke.dk
Toke Høiland-Jørgensen [Sat, 2 Nov 2019 11:09:38 +0000 (12:09 +0100)]
libbpf: Store map pin path and status in struct bpf_map
Support storing and setting a pin path in struct bpf_map, which can be used
for automatic pinning. Also store the pin status so we can avoid attempts
to re-pin a map that has already been pinned (or reused from a previous
pinning).
The behaviour of bpf_object__{un,}pin_maps() is changed so that if it is
called with a NULL path argument (which was previously illegal), it will
(un)pin only those maps that have a pin_path set.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157269297876.394725.14782206533681896279.stgit@toke.dk
Toke Høiland-Jørgensen [Sat, 2 Nov 2019 11:09:37 +0000 (12:09 +0100)]
libbpf: Fix error handling in bpf_map__reuse_fd()
bpf_map__reuse_fd() was calling close() in the error path before returning
an error value based on errno. However, close can change errno, so that can
lead to potentially misleading error messages. Instead, explicitly store
errno in the err variable before each goto.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157269297769.394725.12634985106772698611.stgit@toke.dk
Linus Torvalds [Sat, 2 Nov 2019 00:48:11 +0000 (17:48 -0700)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Fix free/alloc races in batmanadv, from Sven Eckelmann.
2) Several leaks and other fixes in kTLS support of mlx5 driver, from
Tariq Toukan.
3) BPF devmap_hash cost calculation can overflow on 32-bit, from Toke
Høiland-Jørgensen.
4) Add an r8152 device ID, from Kazutoshi Noguchi.
5) Missing include in ipv6's addrconf.c, from Ben Dooks.
6) Use siphash in flow dissector, from Eric Dumazet. Attackers can
easily infer the 32-bit secret otherwise etc.
7) Several netdevice nesting depth fixes from Taehee Yoo.
8) Fix several KCSAN reported errors, from Eric Dumazet. For example,
when doing lockless skb_queue_empty() checks, and accessing
sk_napi_id/sk_incoming_cpu lockless as well.
9) Fix jumbo packet handling in RXRPC, from David Howells.
10) Bump SOMAXCONN and tcp_max_syn_backlog values, from Eric Dumazet.
11) Fix DMA synchronization in gve driver, from Yangchun Fu.
12) Several bpf offload fixes, from Jakub Kicinski.
13) Fix sk_page_frag() recursion during memory reclaim, from Tejun Heo.
14) Fix ping latency during high traffic rates in hisilicon driver, from
Jiangfent Xiao.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
net: fix installing orphaned programs
net: cls_bpf: fix NULL deref on offload filter removal
selftests: bpf: Skip write only files in debugfs
selftests: net: reuseport_dualstack: fix uninitalized parameter
r8169: fix wrong PHY ID issue with RTL8168dp
net: dsa: bcm_sf2: Fix IMP setup for port different than 8
net: phylink: Fix phylink_dbg() macro
gve: Fixes DMA synchronization.
inet: stop leaking jiffies on the wire
ixgbe: Remove duplicate clear_bit() call
Documentation: networking: device drivers: Remove stray asterisks
e1000: fix memory leaks
i40e: Fix receive buffer starvation for AF_XDP
igb: Fix constant media auto sense switching when no cable is connected
net: ethernet: arc: add the missed clk_disable_unprepare
igb: Enable media autosense for the i350.
igb/igc: Don't warn on fatal read failures when the device is removed
tcp: increase tcp_max_syn_backlog max value
net: increase SOMAXCONN to 4096
netdevsim: Fix use-after-free during device dismantle
...
Linus Torvalds [Sat, 2 Nov 2019 00:37:44 +0000 (17:37 -0700)]
Merge tag 'nfs-for-5.4-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client bugfixes from Anna Schumaker:
"This contains two delegation fixes (with the RCU lock leak fix marked
for stable), and three patches to fix destroying the the sunrpc back
channel.
Stable bugfixes:
- Fix an RCU lock leak in nfs4_refresh_delegation_stateid()
Other fixes:
- The TCP back channel mustn't disappear while requests are
outstanding
- The RDMA back channel mustn't disappear while requests are
outstanding
- Destroy the back channel when we destroy the host transport
- Don't allow a cached open with a revoked delegation"
* tag 'nfs-for-5.4-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Fix an RCU lock leak in nfs4_refresh_delegation_stateid()
NFSv4: Don't allow a cached open with a revoked delegation
SUNRPC: Destroy the back channel when we destroy the host transport
SUNRPC: The RDMA back channel mustn't disappear while requests are outstanding
SUNRPC: The TCP back channel mustn't disappear while requests are outstanding
Linus Torvalds [Sat, 2 Nov 2019 00:33:12 +0000 (17:33 -0700)]
Merge tag 'for-linus-
20191101' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Two small nvme fixes, one is a fabrics connection fix, the other one
a cleanup made possible by that fix (Anton, via Keith)
- Fix requeue handling in umb ubd (Anton)
- Fix spin_lock_irq() nesting in blk-iocost (Dan)
- Three small io_uring fixes:
- Install io_uring fd after done with ctx (me)
- Clear ->result before every poll issue (me)
- Fix leak of shadow request on error (Pavel)
* tag 'for-linus-
20191101' of git://git.kernel.dk/linux-block:
iocost: don't nest spin_lock_irq in ioc_weight_write()
io_uring: ensure we clear io_kiocb->result before each issue
um-ubd: Entrust re-queue to the upper layers
nvme-multipath: remove unused groups_only mode in ana log
nvme-multipath: fix possible io hang after ctrl reconnect
io_uring: don't touch ctx in setup after ring fd install
io_uring: Fix leaked shadow_req
Linus Torvalds [Sat, 2 Nov 2019 00:20:53 +0000 (17:20 -0700)]
Merge tag 'riscv/for-v5.4-rc6' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"One fix for PCIe users:
- Fix legacy PCI I/O port access emulation
One set of cleanups:
- Resolve most of the warnings generated by sparse across arch/riscv.
No functional changes
And one MAINTAINERS update:
- Update Palmer's E-mail address"
* tag 'riscv/for-v5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
MAINTAINERS: Change to my personal email address
RISC-V: Add PCIe I/O BAR memory mapping
riscv: for C functions called only from assembly, mark with __visible
riscv: fp: add missing __user pointer annotations
riscv: add missing header file includes
riscv: mark some code and data as file-static
riscv: init: merge split string literals in preprocessor directive
riscv: add prototypes for assembly language functions from head.S
Daniel Borkmann [Fri, 1 Nov 2019 23:38:49 +0000 (00:38 +0100)]
Merge branch 'bpf-xskmap-perf-improvements'
Björn Töpel says:
====================
This set consists of three patches from Maciej and myself which are
optimizing the XSKMAP lookups. In the first patch, the sockets are
moved to be stored at the tail of the struct xsk_map. The second
patch, Maciej implements map_gen_lookup() for XSKMAP. The third patch,
introduced in this revision, moves various XSKMAP functions, to permit
the compiler to do more aggressive inlining.
Based on the XDP program from tools/lib/bpf/xsk.c where
bpf_map_lookup_elem() is explicitly called, this work yields a 5%
improvement for xdpsock's rxdrop scenario. The last patch yields 2%
improvement.
Jonathan's Acked-by: for patch 1 and 2 was carried on. Note that the
overflow checks are done in the bpf_map_area_alloc() and
bpf_map_charge_init() functions, which was fixed in commit
ff1c08e1f74b ("bpf: Change size to u64 for bpf_map_{area_alloc,
charge_init}()").
[1] https://patchwork.ozlabs.org/patch/1186170/
v1->v2: * Change size/cost to size_t and use {struct, array}_size
where appropriate. (Jakub)
v2->v3: * Proper commit message for patch 2.
v3->v4: * Change size_t to u64 to handle 32-bit overflows. (Jakub)
* Introduced patch 3.
v4->v5: * Use BPF_SIZEOF size, instead of BPF_DW, for correct
pointer-sized loads. (Daniel)
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Björn Töpel [Fri, 1 Nov 2019 11:03:46 +0000 (12:03 +0100)]
xsk: Restructure/inline XSKMAP lookup/redirect/flush
In this commit the XSKMAP entry lookup function used by the XDP
redirect code is moved from the xskmap.c file to the xdp_sock.h
header, so the lookup can be inlined from, e.g., the
bpf_xdp_redirect_map() function.
Further the __xsk_map_redirect() and __xsk_map_flush() is moved to the
xsk.c, which lets the compiler inline the xsk_rcv() and xsk_flush()
functions.
Finally, all the XDP socket functions were moved from linux/bpf.h to
net/xdp_sock.h, where most of the XDP sockets functions are anyway.
This yields a ~2% performance boost for the xdpsock "rx_drop"
scenario.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191101110346.15004-4-bjorn.topel@gmail.com
Maciej Fijalkowski [Fri, 1 Nov 2019 11:03:45 +0000 (12:03 +0100)]
bpf: Implement map_gen_lookup() callback for XSKMAP
Inline the xsk_map_lookup_elem() via implementing the map_gen_lookup()
callback. This results in emitting the bpf instructions in place of
bpf_map_lookup_elem() helper call and better performance of bpf
programs.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/20191101110346.15004-3-bjorn.topel@gmail.com
Björn Töpel [Fri, 1 Nov 2019 11:03:44 +0000 (12:03 +0100)]
xsk: Store struct xdp_sock as a flexible array member of the XSKMAP
Prior this commit, the array storing XDP socket instances were stored
in a separate allocated array of the XSKMAP. Now, we store the sockets
as a flexible array member in a similar fashion as the arraymap. Doing
so, we do less pointer chasing in the lookup.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/20191101110346.15004-2-bjorn.topel@gmail.com
Linus Torvalds [Fri, 1 Nov 2019 22:16:25 +0000 (15:16 -0700)]
Merge branch 'parisc-5.4-3' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fix from Helge Deller:
"Fix a parisc kernel crash with ftrace functions when compiled without
frame pointers"
* 'parisc-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: fix frame pointer in ftrace_regs_caller()
David S. Miller [Fri, 1 Nov 2019 22:16:01 +0000 (15:16 -0700)]
Merge branch 'fix-BPF-offload-related-bugs'
Jakub Kicinski says:
====================
fix BPF offload related bugs
test_offload.py catches some recently added bugs.
First of a bug in test_offload.py itself after recent changes
to netdevsim is fixed.
Second patch fixes a bug in cls_bpf, and last one addresses
a problem with the recently added XDP installation optimization.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 1 Nov 2019 03:07:00 +0000 (20:07 -0700)]
net: fix installing orphaned programs
When netdevice with offloaded BPF programs is destroyed
the programs are orphaned and removed from the program
IDA - their IDs get released (the programs may remain
accessible via existing open file descriptors and pinned
files). After IDs are released they are set to 0.
This confuses dev_change_xdp_fd() because it compares
the __dev_xdp_query() result where 0 means no program
with prog->aux->id where 0 means orphaned.
dev_change_xdp_fd() would have incorrectly returned success
even though it had not installed the program.
Since drivers already catch this case via bpf_offload_dev_match()
let them handle this case. The error message drivers produce in
this case ("program loaded for a different device") is in fact
correct as the orphaned program must had to be loaded for a
different device.
Fixes:
c14a9f633d9e ("net: Don't call XDP_SETUP_PROG when nothing is changed")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 1 Nov 2019 03:06:59 +0000 (20:06 -0700)]
net: cls_bpf: fix NULL deref on offload filter removal
Commit
401192113730 ("net: sched: refactor block offloads counter
usage") missed the fact that either new prog or old prog may be
NULL.
Fixes:
401192113730 ("net: sched: refactor block offloads counter usage")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 1 Nov 2019 03:06:58 +0000 (20:06 -0700)]
selftests: bpf: Skip write only files in debugfs
DebugFS for netdevsim now contains some "action trigger" files
which are write only. Don't try to capture the contents of those.
Note that we can't use os.access() because the script requires
root.
Fixes:
4418f862d675 ("netdevsim: implement support for devlink region and snapshots")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Wang [Thu, 31 Oct 2019 23:24:36 +0000 (16:24 -0700)]
selftests: net: reuseport_dualstack: fix uninitalized parameter
This test reports EINVAL for getsockopt(SOL_SOCKET, SO_DOMAIN)
occasionally due to the uninitialized length parameter.
Initialize it to fix this, and also use int for "test_family" to comply
with the API standard.
Fixes:
d6a61f80b871 ("soreuseport: test mixed v4/v6 sockets")
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Cc: Craig Gallek <cgallek@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Thu, 31 Oct 2019 23:10:21 +0000 (00:10 +0100)]
r8169: fix wrong PHY ID issue with RTL8168dp
As reported in [0] at least one RTL8168dp version has problems
establishing a link. This chip version has an integrated RTL8211b PHY,
however the chip seems to report a wrong PHY ID, resulting in a wrong
PHY driver (for Generic Realtek PHY) being loaded.
Work around this issue by adding a hook to r8168dp_2_mdio_read()
for returning the correct PHY ID.
[0] https://bbs.archlinux.org/viewtopic.php?id=246508
Fixes:
242cd9b5866a ("r8169: use phy_resume/phy_suspend")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 31 Oct 2019 22:54:05 +0000 (15:54 -0700)]
net: dsa: bcm_sf2: Fix IMP setup for port different than 8
Since it became possible for the DSA core to use a CPU port different
than 8, our bcm_sf2_imp_setup() function was broken because it assumes
that registers are applicable to port 8. In particular, the port's MAC
is going to stay disabled, so make sure we clear the RX_DIS and TX_DIS
bits if we are not configured for port 8.
Fixes:
9f91484f6fcc ("net: dsa: make "label" property optional for dsa2")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 31 Oct 2019 22:42:26 +0000 (15:42 -0700)]
net: phylink: Fix phylink_dbg() macro
The phylink_dbg() macro does not follow dynamic debug or defined(DEBUG)
and as a result, it spams the kernel log since a PR_DEBUG level is
currently used. Fix it to be defined appropriately whether
CONFIG_DYNAMIC_DEBUG or defined(DEBUG) are set.
Fixes:
17091180b152 ("net: phylink: Add phylink_{printk, err, warn, info, dbg} macros")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yangchun Fu [Fri, 1 Nov 2019 17:09:56 +0000 (10:09 -0700)]
gve: Fixes DMA synchronization.
Synces the DMA buffer properly in order for CPU and device to see
the most up-to-data data.
Signed-off-by: Yangchun Fu <yangchun@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 1 Nov 2019 17:32:19 +0000 (10:32 -0700)]
inet: stop leaking jiffies on the wire
Historically linux tried to stick to RFC 791, 1122, 2003
for IPv4 ID field generation.
RFC 6864 made clear that no matter how hard we try,
we can not ensure unicity of IP ID within maximum
lifetime for all datagrams with a given source
address/destination address/protocol tuple.
Linux uses a per socket inet generator (inet_id), initialized
at connection startup with a XOR of 'jiffies' and other
fields that appear clear on the wire.
Thiemo Nagel pointed that this strategy is a privacy
concern as this provides 16 bits of entropy to fingerprint
devices.
Let's switch to a random starting point, this is just as
good as far as RFC 6864 is concerned and does not leak
anything critical.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Thiemo Nagel <tnagel@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Mashak [Fri, 1 Nov 2019 19:05:40 +0000 (15:05 -0400)]
tc-testing: added tests with cookie for conntrack TC action
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 1 Nov 2019 21:50:27 +0000 (14:50 -0700)]
Merge branch '1GbE' of git://git./linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2019-11-01
This series contains updates to e1000, igb, igc, ixgbe, i40e and driver
documentation.
Lyude Paul fixes an issue where a fatal read error occurs when the
device is unplugged from the machine. So change the read error into a
warn while the device is still present.
Manfred Rudigier found that the i350 device was not apart of the "Media
Auto Sense" feature, yet the device supports it. So add the missing
i350 device to the check and fix an issue where the media auto sense
would flip/flop when no cable was connected to the port causing spurious
kernel log messages.
I fixed an issue where the fix to resolve receive buffer starvation was
applied in more than one place in the driver, one being the incorrect
location in the i40e driver.
Wenwen Wang fixes a potential memory leak in e1000 where allocated
memory is not properly cleaned up in one of the error paths.
Jonathan Neuschäfer cleans up the driver documentation to be consistent
and remove the footnote reference, since the footnote no longer exists in
the documentation.
Igor Pylypiv cleans up a duplicate clearing of a bit, no need to clear
it twice.
v2: Fixed alignment issue in patch 3 of the series based on community
feedback.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Pylypiv [Fri, 4 Oct 2019 06:53:57 +0000 (23:53 -0700)]
ixgbe: Remove duplicate clear_bit() call
__IXGBE_RX_BUILD_SKB_ENABLED bit is already cleared.
Signed-off-by: Igor Pylypiv <igor.pylypiv@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jonathan Neuschäfer [Wed, 2 Oct 2019 15:09:55 +0000 (17:09 +0200)]
Documentation: networking: device drivers: Remove stray asterisks
These asterisks were once references to a line that said:
"* Other names and brands may be claimed as the property of others."
But now, they serve no purpose; they can only irritate the reader.
Fixes:
de3edab4276c ("e1000: update README for e1000")
Fixes:
a3fb65680f65 ("e100.txt: Cleanup license info in kernel doc")
Fixes:
da8c01c4502a ("e1000e.txt: Add e1000e documentation")
Fixes:
f12a84a9f650 ("Documentation: fm10k: Add kernel documentation")
Fixes:
b55c52b1938c ("igb.txt: Add igb documentation")
Fixes:
c4e9b56e2442 ("igbvf.txt: Add igbvf Documentation")
Fixes:
d7064f4c192c ("Documentation/networking/: Update Intel wired LAN driver documentation")
Fixes:
c4b8c01112a1 ("ixgbevf.txt: Update ixgbevf documentation")
Fixes:
1e06edcc2f22 ("Documentation: i40e: Prepare documentation for RST conversion")
Fixes:
105bf2fe6b32 ("i40evf: add driver to kernel build system")
Fixes:
1fae869bcf3d ("Documentation: ice: Prepare documentation for RST conversion")
Fixes:
df69ba43217d ("ionic: Add basic framework for IONIC Network device driver")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Wenwen Wang [Mon, 12 Aug 2019 05:59:21 +0000 (00:59 -0500)]
e1000: fix memory leaks
In e1000_set_ringparam(), 'tx_old' and 'rx_old' are not deallocated if
e1000_up() fails, leading to memory leaks. Refactor the code to fix this
issue.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jeff Kirsher [Mon, 7 Oct 2019 22:07:24 +0000 (15:07 -0700)]
i40e: Fix receive buffer starvation for AF_XDP
Magnus's fix to resolve a potential receive buffer starvation for AF_XDP
got applied to both the i40e_xsk_umem_enable/disable() functions, when it
should have only been applied to the "enable". So clean up the undesired
code in the disable function.
CC: Magnus Karlsson <magnus.karlsson@intel.com>
Fixes:
1f459bdc2007 ("i40e: fix potential RX buffer starvation for AF_XDP")
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Manfred Rudigier [Thu, 15 Aug 2019 20:55:20 +0000 (13:55 -0700)]
igb: Fix constant media auto sense switching when no cable is connected
At least on the i350 there is an annoying behavior that is maybe also
present on 82580 devices, but was probably not noticed yet as MAS is not
widely used.
If no cable is connected on both fiber/copper ports the media auto sense
code will constantly swap between them as part of the watchdog task and
produce many unnecessary kernel log messages.
The swap code responsible for this behavior (switching to fiber) should
not be executed if the current media type is copper and there is no signal
detected on the fiber port. In this case we can safely wait until the
AUTOSENSE_EN bit is cleared.
Signed-off-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Linus Torvalds [Fri, 1 Nov 2019 18:49:54 +0000 (11:49 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Fix two scheduler topology bugs/oversights on Juno r0 2+4 big.LITTLE
systems"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/topology: Allow sched_asym_cpucapacity to be disabled
sched/topology: Don't try to build empty sched domains
Linus Torvalds [Fri, 1 Nov 2019 18:40:47 +0000 (11:40 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Misc fixes: an ABI fix for a reserved field, AMD IBS fixes, an Intel
uncore PMU driver fix and a header typo fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/headers: Fix spelling s/EACCESS/EACCES/, s/privilidge/privilege/
perf/x86/uncore: Fix event group support
perf/x86/amd/ibs: Handle erratum #420 only on the affected CPU family (10h)
perf/x86/amd/ibs: Fix reading of the IBS OpData register and thus precise RIP validity
perf/core: Start rejecting the syscall with attr.__reserved_2 set
Linus Torvalds [Fri, 1 Nov 2019 18:32:50 +0000 (11:32 -0700)]
Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Various fixes all over the map: prevent boot crashes on HyperV,
classify UEFI randomness as bootloader randomness, fix EFI boot for
the Raspberry Pi2, fix efi_test permissions, etc"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/efi_test: Lock down /dev/efi_test and require CAP_SYS_ADMIN
x86, efi: Never relocate kernel below lowest acceptable address
efi: libstub/arm: Account for firmware reserved memory at the base of RAM
efi/random: Treat EFI_RNG_PROTOCOL output as bootloader randomness
efi/tpm: Return -EINVAL when determining tpm final events log size fails
efi: Make CONFIG_EFI_RCI2_TABLE selectable on x86 only
David S. Miller [Fri, 1 Nov 2019 17:36:46 +0000 (10:36 -0700)]
Merge tag 'wireless-drivers-2019-11-01' of git://git./linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 5.4
Third set of fixes for 5.4. Most of them are for iwlwifi but important
fixes also for rtlwifi and mt76, the overflow fix for rtlwifi being
most important.
iwlwifi
* fix merge damage on earlier patch
* various fixes to device id handling
* fix scan config command handling which caused firmware asserts
rtlwifi
* fix overflow on P2P IE handling
* don't deliver too small frames to mac80211
mt76
* disable PCIE_ASPM
* fix buffer DMA unmap on certain cases
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 1 Nov 2019 17:32:43 +0000 (10:32 -0700)]
Merge branch 'net-bridge-minor-followup-optimizations'
Nikolay Aleksandrov says:
====================
net: bridge: minor followup optimizations
After the converted flags to bitops we can take advantage of the flags
assignment and remove one test and three atomic bitops from the learning
paths (patch 01 and patch 02), patch 03 restores the unlikely() when taking
over HW learned entries.
v2: a clean export of the latest set version
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Fri, 1 Nov 2019 12:46:39 +0000 (14:46 +0200)]
net: bridge: fdb: restore unlikely() when taking over externally added entries
Taking over hw-learned entries is not a likely scenario so restore the
unlikely() use for the case of SW taking over externally learned
entries.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Fri, 1 Nov 2019 12:46:38 +0000 (14:46 +0200)]
net: bridge: fdb: avoid two atomic bitops in br_fdb_external_learn_add()
If we setup the fdb flags prior to calling fdb_create() we can avoid
two atomic bitops when learning a new entry.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Fri, 1 Nov 2019 12:46:37 +0000 (14:46 +0200)]
net: bridge: fdb: br_fdb_update can take flags directly
If we modify br_fdb_update() to take flags directly we can get rid of
one test and one atomic bitop in the learning path.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chuhong Yuan [Fri, 1 Nov 2019 12:17:25 +0000 (20:17 +0800)]
net: ethernet: arc: add the missed clk_disable_unprepare
The remove misses to disable and unprepare priv->macclk like what is done
when probe fails.
Add the missed call in remove.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 1 Nov 2019 17:03:46 +0000 (10:03 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"These are almost exclusively related to CPU errata in CPUs from
Broadcom and Qualcomm where the workarounds were either not being
enabled when they should have been or enabled when they shouldn't have
been.
The only "interesting" fix is ensuring that writeable, shared mappings
are initially mapped as clean since we inadvertently broke the logic
back in v4.14 and then noticed the problem via code inspection the
other day.
The only critical issue we have outstanding is a sporadic NULL
dereference in the scheduler, which doesn't appear to be
arm64-specific and PeterZ is tearing his hair out over it at the
moment.
Summary:
- Enable CPU errata workarounds for Broadcom Brahma-B53
- Enable CPU errata workarounds for Qualcomm Hydra/Kryo CPUs
- Fix initial dirty status of writeable, shared mappings"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: apply ARM64_ERRATUM_843419 workaround for Brahma-B53 core
arm64: Brahma-B53 is SSB and spectre v2 safe
arm64: apply ARM64_ERRATUM_845719 workaround for Brahma-B53 core
arm64: cpufeature: Enable Qualcomm Falkor errata 1009 for Kryo
arm64: cpufeature: Enable Qualcomm Falkor/Kryo errata 1003
arm64: Ensure VM_WRITE|VM_SHARED ptes are clean by default
Linus Torvalds [Fri, 1 Nov 2019 16:54:38 +0000 (09:54 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"generic:
- fix memory leak on failure to create VM
x86:
- fix MMU corner case with AMD nested paging disabled"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: vmx, svm: always run with EFER.NXE=1 when shadow paging is active
kvm: call kvm_arch_destroy_vm if vm creation fails
kvm: Allocate memslots and buses before calling kvm_arch_init_vm
Linus Torvalds [Fri, 1 Nov 2019 16:41:08 +0000 (09:41 -0700)]
Merge tag 'drm-fixes-2019-11-01' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is the regular drm fixes pull request for 5.4-rc6. It's a bit
larger than I'd like but then last week was quieter than usual.
The main fixes are amdgpu, and the two bigger area are navi fixes
which are the newest GPU range so still getting actively fixed up, but
also a bunch of clang stack alignment fixes (as amdgpu uses double in
some places).
Otherwise it's all fairly run of the mill fixes, i915, panfrost,
etnaviv, v3d and radeon, along with a core scheduler fix.
Summary:
amdgpu:
- clang alignment fixes
- Updated golden settings
- navi: gpuvm, sdma and display fixes
- Freesync fix
- Gamma fix for DCN
- DP dongle detection fix
- vega10: Fix for undervolting
radeon:
- reenable kexec fix for ppc
scheduler:
- set an error if hw job failed
i915:
- fix PCH reference clock for HSW/BDW
- TGL display PLL doc fix
panfrost:
- warning fix
- runtime pm fix
- bad pointer dereference fix
v3d:
- memleak fix
etnaviv:
- memory corruption fix
- deadlock fix
- reintroduce lost debug message"
* tag 'drm-fixes-2019-11-01' of git://anongit.freedesktop.org/drm/drm: (29 commits)
drm/amdgpu: enable -msse2 for GCC 7.1+ users
drm/amdgpu: fix stack alignment ABI mismatch for GCC 7.1+
drm/amdgpu: fix stack alignment ABI mismatch for Clang
drm/radeon: Fix EEH during kexec
drm/amdgpu/gmc10: properly set BANK_SELECT and FRAGMENT_SIZE
drm/amdgpu/powerplay/vega10: allow undervolting in p7
dc.c:use kzalloc without test
drm/amd/display: setting the DIG_MODE to the correct value.
drm/amd/display: Passive DP->HDMI dongle detection fix
drm/amd/display: add 50us buffer as WA for pstate switch in active
drm/amd/display: Allow inverted gamma
drm/amd/display: do not synchronize "drr" displays
drm/amdgpu: If amdgpu_ib_schedule fails return back the error.
drm/sched: Set error to s_fence if HW job submission failed.
drm/amdgpu/gfx10: update gfx golden settings for navi12
drm/amdgpu/gfx10: update gfx golden settings for navi14
drm/amdgpu/gfx10: update gfx golden settings
drm/amd/display: Change Navi14's DWB flag to 1
drm/amdgpu/sdma5: do not execute 0-sized IBs (v2)
drm/amdgpu: Fix SDMA hang when performing VKexample test
...
Linus Torvalds [Fri, 1 Nov 2019 16:30:48 +0000 (09:30 -0700)]
Merge tag 'pm-5.4-rc6' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a recently introduced (mostly theoretical) issue that the requests
to confine the maximum CPU frequency coming from the platform firmware
may not be taken into account if multiple CPUs are covered by one
cpufreq policy on a system with ACPI"
* tag 'pm-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Add QoS requests for all CPUs
Linus Torvalds [Fri, 1 Nov 2019 16:21:48 +0000 (09:21 -0700)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A number of bug fixes and a regression fix:
- Various issues from static analysis in hfi1, uverbs, hns, and cxgb4
- Fix for deadlock in a case when the new auto RDMA module loading is
used
- Missing _irq notation in a prior -rc patch found by lockdep
- Fix a locking and lifetime issue in siw
- Minor functional bug fixes in cxgb4, mlx5, qedr
- Fix a regression where vlan interfaces no longer worked with RDMA
CM in some cases"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Prevent memory leaks of eq->buf_list
RDMA/iw_cxgb4: Avoid freeing skb twice in arp failure case
RDMA/mlx5: Use irq xarray locking for mkey_table
IB/core: Avoid deadlock during netlink message handling
RDMA/nldev: Skip counter if port doesn't match
RDMA/uverbs: Prevent potential underflow
IB/core: Use rdma_read_gid_l2_fields to compare GID L2 fields
RDMA/qedr: Fix reported firmware version
RDMA/siw: free siw_base_qp in kref release routine
RDMA/iwcm: move iw_rem_ref() calls out of spinlock
iw_cxgb4: fix ECN check on the passive accept
IB/hfi1: Use a common pad buffer for 9B and 16B packets
IB/hfi1: Avoid excessive retry for TID RDMA READ request
RDMA/mlx5: Clear old rate limit when closing QP
Linus Torvalds [Fri, 1 Nov 2019 16:18:00 +0000 (09:18 -0700)]
Merge tag 'sound-5.4-rc6' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A couple of regression fixes and a fix for mutex deadlock at
hog-unplug, as well as other device-specific fixes:
- A commit to avoid the spurious unsolicited interrupt on HD-audio
bus caused a stall at shutdown, so it's reverted now.
- The recent support of AMD/Nvidia audio component binding caused a
mutex deadlock; fixed by splitting to another mutex
- The device hot-unplug and the ALSA timer close combo may lead to
another mutex deadlock; fixed by moving put_device() calls
- Usual device-specific small quirks for HD- and USB-audio drivers
- An old error check fix in FireWire driver"
* tag 'sound-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: timer: Fix mutex deadlock at releasing card
ALSA: hda - Fix mutex deadlock in HDMI codec driver
Revert "ALSA: hda: Flush interrupts on disabling"
ALSA: bebob: Fix prototype of helper function to return negative value
ALSA: hda/realtek - Fix 2 front mics of codec 0x623
ALSA: hda/realtek - Add support for ALC623
ALSA: usb-audio: Add DSD support for Gustard U16/X26 USB Interface
Trond Myklebust [Thu, 31 Oct 2019 22:40:33 +0000 (18:40 -0400)]
NFS: Fix an RCU lock leak in nfs4_refresh_delegation_stateid()
A typo in nfs4_refresh_delegation_stateid() means we're leaking an
RCU lock, and always returning a value of 'false'. As the function
description states, we were always supposed to return 'true' if a
matching delegation was found.
Fixes:
12f275cdd163 ("NFSv4: Retry CLOSE and DELEGRETURN on NFS4ERR_OLD_STATEID.")
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Trond Myklebust [Thu, 31 Oct 2019 22:40:32 +0000 (18:40 -0400)]
NFSv4: Don't allow a cached open with a revoked delegation
If the delegation is marked as being revoked, we must not use it
for cached opens.
Fixes:
869f9dfa4d6d ("NFSv4: Fix races between nfs_remove_bad_delegation() and delegation return")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Jakub Kicinski [Fri, 1 Nov 2019 00:51:27 +0000 (17:51 -0700)]
Revert "selftests: bpf: Don't try to read files without read permission"
This reverts commit
5bc60de50dfe ("selftests: bpf: Don't try to read
files without read permission").
Quoted commit does not work at all, and was never tested.
Script requires root permissions (and tests for them)
and os.access() will always return true for root.
The correct fix is needed in the bpf tree, so let's just
revert and save ourselves the merge conflict.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Pirko <jiri@resnulli.us>
Link: https://lore.kernel.org/bpf/20191101005127.1355-1-jakub.kicinski@netronome.com
Florian Fainelli [Thu, 31 Oct 2019 21:47:25 +0000 (14:47 -0700)]
arm64: apply ARM64_ERRATUM_843419 workaround for Brahma-B53 core
The Broadcom Brahma-B53 core is susceptible to the issue described by
ARM64_ERRATUM_843419 so this commit enables the workaround to be applied
when executing on that core.
Since there are now multiple entries to match, we must convert the
existing ARM64_ERRATUM_843419 into an erratum list and use
cpucap_multi_entry_cap_matches to match our entries.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
Florian Fainelli [Thu, 31 Oct 2019 21:47:24 +0000 (14:47 -0700)]
arm64: Brahma-B53 is SSB and spectre v2 safe
Add the Brahma-B53 CPU (all versions) to the whitelists of CPUs for the
SSB and spectre v2 mitigations.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
Doug Berger [Thu, 31 Oct 2019 21:47:23 +0000 (14:47 -0700)]
arm64: apply ARM64_ERRATUM_845719 workaround for Brahma-B53 core
The Broadcom Brahma-B53 core is susceptible to the issue described by
ARM64_ERRATUM_845719 so this commit enables the workaround to be applied
when executing on that core.
Since there are now multiple entries to match, we must convert the
existing ARM64_ERRATUM_845719 into an erratum list.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
Dave Airlie [Fri, 1 Nov 2019 01:27:39 +0000 (11:27 +1000)]
Merge tag 'drm-fixes-5.4-2019-10-30' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
drm-fixes-5.4-2019-10-30:
amdgpu:
- clang fixes
- Updated golden settings
- GPUVM fixes for navi
- Navi sdma fix
- Navi display fixes
- Freesync fix
- Gamma fix for DCN
- DP dongle detection fix
- Fix for undervolting on vega10
radeon:
- enable kexec fix for PPC
scheduler:
- set an error on fence if hw job failed
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030162339.44366-1-alexander.deucher@amd.com
Dave Airlie [Fri, 1 Nov 2019 01:13:35 +0000 (11:13 +1000)]
Merge tag 'drm-intel-fixes-2019-10-31' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix PCH reference clock for FDI on HSW/BDW which was causing users blank screen
- Small documentation fix for TGL display PLLs
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031171209.GA6586@intel.com
Dave Airlie [Fri, 1 Nov 2019 01:09:42 +0000 (11:09 +1000)]
Merge tag 'drm-misc-fixes-2019-10-30-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
- three fixes for panfrost, one to silence a warning, one to fix
runtime_pm and one to prevent bogus pointer dereferences
- one fix for a memleak in v3d
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030182207.evrscl7lnv42u5zu@hendrix
Dave Airlie [Fri, 1 Nov 2019 01:08:24 +0000 (11:08 +1000)]
Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux into drm-fixes
One memory corruption fix in the MMUv2 GPU coredump code, a deadlock
fix also in the coredump code and reintroduction of a helpful message,
which got dropped by accident in this cycle.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/b0d640267662e3ce5e0089d0afedc1baba55058d.camel@pengutronix.de
Joe Perches [Thu, 31 Oct 2019 18:23:37 +0000 (11:23 -0700)]
hp100: Move 100BaseVG AnyLAN driver to staging
100BaseVG AnyLAN hasn't been useful since 1996 or so and even then
didn't sell many devices. It's unlikely any are still in use.
Move the driver to staging with the intent of removing it altogether
one day.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 31 Oct 2019 21:48:31 +0000 (14:48 -0700)]
Merge branch 'bnxt_en-Updates-for-net-next'
Michael Chan says:
====================
bnxt_en: Updates for net-next.
This patch series adds TC Flower tunnel decap and rewrite actions in
the first 4 patches. The next 3 patches integrates the recently
added error recovery with the RDMA driver by calling the proper
hooks to stop and start.
v2: Fix pointer alignment issue in patch #1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavan Chebbi [Thu, 31 Oct 2019 05:07:51 +0000 (01:07 -0400)]
bnxt_en: Call bnxt_ulp_stop()/bnxt_ulp_start() during suspend/resume.
Inform the RDMA driver to stop/start during suspend/resume. The
RDMA driver needs to stop and start just like error recovery.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Thu, 31 Oct 2019 05:07:50 +0000 (01:07 -0400)]
bnxt_en: Call bnxt_ulp_stop()/bnxt_ulp_start() during error recovery.
Notify the RDMA driver by calling the bnxt_ulp_stop()/bnxt_ulp_start()
hooks during error recovery. The current ULP IRQ start/stop
sequence in error recovery (which is insufficient) is replaced with the
full reset sequence when we call bnxt_ulp_stop()/bnxt_ulp_start().
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Thu, 31 Oct 2019 05:07:49 +0000 (01:07 -0400)]
bnxt_en: Improve bnxt_ulp_stop()/bnxt_ulp_start() call sequence.
We call bnxt_ulp_stop() to notify the RDMA driver that some error or
imminent reset is about to happen. After that we always call
some variants of bnxt_close().
In the next patch, we will integrate the recently added error
recovery with the RDMA driver. In response to ulp_stop, the
RDMA driver may free MSIX vectors and that will also trigger
bnxt_close(). To avoid bnxt_close() from being called twice,
we set a new flag after ulp_stop is called. If the RDMA driver
frees MSIX vectors while the new flag is set, we will not call
bnxt_close(), knowing that it will happen in due course.
With this change, we must make sure that the bnxt_close() call
after ulp_stop will reset IRQ. Modify bnxt_reset_task()
accordingly if we call ulp_stop.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sriharsha Basavapatna [Thu, 31 Oct 2019 05:07:48 +0000 (01:07 -0400)]
bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks
The decap (VXLAN tunnel) flow rules are not getting offloaded with
upstream kernel. This is because TC block callback infrastructure has
been updated to use indirect callbacks to get offloaded rules from
other higher level devices (such as tunnels), instead of ndo_setup_tc().
Since the decap rules are applied to the tunnel devices (e.g, vxlan_sys),
the driver should register for indirect TC callback with tunnel devices
to get the rules for offloading. This patch updates the driver to
register and process indirect TC block callbacks from VXLAN tunnels.
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Somnath Kotur [Thu, 31 Oct 2019 05:07:47 +0000 (01:07 -0400)]
bnxt_en: Add support for NAT(L3/L4 rewrite)
Provides support for modifying L3/L4 Header parameters to support NAT.
Sets the appropriate fields/bits in cfa_flow_alloc cmd.
Sample cmd for offloading an IPv4 flow with SNAT:
ovs-ofctl add-flow ovsbr0 "ip,nw_src=192.168.201.44 \
actions=mod_nw_src:203.31.220.144,output:p7p1"
Replace 'nw_src' with 'nw_dst' in above cmd for DNAT with IPv4
Sample cmd for offloading an IPv4 flow with SNAPT:
ovs-ofctl add-flow ovsbr0 "ip,nw_src=192.168.201.44 \
actions=mod_nw_src:203.31.220.144, mod_tp_src:6789,output:p7p1"
Similar to DNAT, replace 'tp_src' with 'tp_dst' for offloading flow
with DNAPT
Sample cmd for offloading an IPv6 flow with SNAT:
ovs-ofctl add-flow ovsbr0 "ipv6, ipv6_src=2001:5c0:9168::2/64 \
actions=load:0x1->NXM_NX_IPV6_SRC[0..63], \
load:0x20010db801920000->NXM_NX_IPV6_SRC[64..127],output:p7p1"
Replace 'SRC' with DST' above for IPv6 DNAT
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Somnath Kotur [Thu, 31 Oct 2019 05:07:46 +0000 (01:07 -0400)]
bnxt: Avoid logging an unnecessary message when a flow can't be offloaded
For every single case where bnxt_tc_can_offload() can fail, we are
logging a user friendly descriptive message anyway, but because of the
path it would take in case of failure, another redundant error message
would get logged. Just freeing the node and returning from the point of
failure should suffice.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Venkat Duvvuru [Thu, 31 Oct 2019 05:07:45 +0000 (01:07 -0400)]
bnxt_en: Add support for L2 rewrite
This patch adds support for packet edit offload of L2 fields (src mac &
dst mac, also referred as L2 rewrite). Only when the mask is fully exact
match for a field, the command is sent down to the adapter to offload
such a flow. Otherwise, an error is returned.
v2: Fix pointer alignment issue in bnxt_fill_l2_rewrite_fields() [MChan]
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 31 Oct 2019 21:26:38 +0000 (14:26 -0700)]
Merge branch 'net-dsa-replace-routing-tables-with-a-list'
Vivien Didelot says:
====================
net: dsa: replace routing tables with a list
This branch gets rid of the ds->rtable static arrays in favor of
a single dst->rtable list. This allows us to move away from the
DSA_MAX_SWITCHES limitation and simplify the switch fabric setup.
Changes in v2:
- fix the reverse christmas for David
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Thu, 31 Oct 2019 02:09:19 +0000 (22:09 -0400)]
net: dsa: tag_8021q: clarify index limitation
Now that there's no restriction from the DSA core side regarding
the switch IDs and port numbers, only tag_8021q which is currently
reserving 3 bits for the switch ID and 4 bits for the port number, has
limitation for these values. Update their descriptions to reflect that.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Thu, 31 Oct 2019 02:09:18 +0000 (22:09 -0400)]
net: dsa: remove limitation of switch index value
Because there is no static array describing the links between switches
anymore, we have no reason to force a limitation of the index value
set by the device tree.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Thu, 31 Oct 2019 02:09:17 +0000 (22:09 -0400)]
net: dsa: remove tree functions related to switches
The DSA fabric setup code has been simplified a lot so get rid of
the dsa_tree_remove_switch, dsa_tree_add_switch and dsa_switch_add
helpers, and keep the code simple with only the dsa_switch_probe and
dsa_switch_remove functions.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Thu, 31 Oct 2019 02:09:16 +0000 (22:09 -0400)]
net: dsa: remove the dst->ds array
Now that the DSA ports are listed in the switch fabric, there is
no need to store the dsa_switch structures from the drivers in the
fabric anymore. So get rid of the dst->ds static array.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Thu, 31 Oct 2019 02:09:15 +0000 (22:09 -0400)]
net: dsa: remove switch routing table setup code
The dsa_switch structure has no routing table specific data to setup,
so the switch fabric can directly walk its ports and initialize its
routing table from them.
This allows us to remove the dsa_switch_setup_routing_table function.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Thu, 31 Oct 2019 02:09:14 +0000 (22:09 -0400)]
net: dsa: remove ds->rtable
Drivers do not use the ds->rtable static arrays anymore, get rid of it.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Thu, 31 Oct 2019 02:09:13 +0000 (22:09 -0400)]
net: dsa: list DSA links in the fabric
Implement a new list of DSA links in the switch fabric itself, to
provide an alterative to the ds->rtable static arrays.
At the same time, provide a new dsa_routing_port() helper to abstract
the usage of ds->rtable in drivers. If there's no port to reach a
given device, return the first invalid port, ds->num_ports. This avoids
potential signedness errors or the need to define special values.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 31 Oct 2019 21:19:45 +0000 (14:19 -0700)]
Merge branch 'dpaa2-eth-add-MAC-PHY-support-through-phylink'
Ioana Ciornei says:
====================
dpaa2-eth: add MAC/PHY support through phylink
The dpaa2-eth driver now has support for connecting to its associated PHY
device found through standard OF bindings. The PHY interraction is handled
by PHYLINK and even though, at the moment, only RGMII_* phy modes are
supported by the driver, this is just the first step into adding the
necessary changes to support the entire spectrum of capabilities.
This comes after feedback on the initial DPAA2 MAC RFC submitted here:
https://lwn.net/Articles/791182/
The notable change is that now, the DPMAC is not a separate driver, and
communication between the DPMAC and DPNI no longer happens through
firmware. Rather, the DPMAC is now a set of API functions that other
net_device drivers (DPNI, DPSW, etc) can use for PHY management.
The change is incremental, because the DPAA2 architecture has many modes of
connecting net devices in hardware loopback (for example DPNI to DPNI).
Those operating modes do not have a DPMAC and phylink instance.
The documentation patch provides a more complete view of the software
architecture and the current implementation.
Changes in v2:
- added patch 1/5 in order to fix module build
- use -ENOTCONN as a proper return error of dprc_get_connection()
- move the locks to rtnl outside of dpaa2_eth_[dis]connect_mac functions
- remove setting supported/advertised from .validate()
Changes in v3:
- remove an unused variable
Changes in v4:
- use ERR_PTR instead of plain NULL
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei [Wed, 30 Oct 2019 23:18:32 +0000 (01:18 +0200)]
net: documentation: add docs for MAC/PHY support in DPAA2
Add documentation file for the MAC/PHY support in the DPAA2
architecture. This describes the architecture and implementation of the
interface between phylink and a DPAA2 network driver.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei [Wed, 30 Oct 2019 23:18:31 +0000 (01:18 +0200)]
dpaa2-eth: add MAC/PHY support through phylink
The dpaa2-eth driver now has support for connecting to its associated
PHY device found through standard OF bindings.
This happens when the DPNI object (that the driver probes on) gets
connected to a DPMAC. When that happens, the device tree is looked up by
the DPMAC ID, and the associated PHY bindings are found.
The old logic of handling the net device's link state by hand still
needs to be kept, as the DPNI can be connected to other devices on the
bus than a DPMAC: other DPNI, DPSW ports, etc. This logic is only
engaged when there is no DPMAC (and therefore no phylink instance)
attached.
The MC firmware support multiple type of DPMAC links: TYPE_FIXED,
TYPE_PHY. The TYPE_FIXED mode does not require any DPMAC management from
Linux side, and as such, the driver will not handle such a DPMAC.
Although PHYLINK typically handles SFP cages and in-band AN modes, for
the moment the driver only supports the RGMII interfaces found on the
LX2160A. Support for other modes will come later.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei [Wed, 30 Oct 2019 23:18:30 +0000 (01:18 +0200)]
dpaa2-eth: update the TX frame queues on DPNI_IRQ_EVENT_ENDPOINT_CHANGED
Currently the function is called at every link up event, although the
FQID values will only change when the DPNI is disconnected from the
current object and reconnected to a different one.
The patch also avoids the forward declaration of update_tx_fqids.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei [Wed, 30 Oct 2019 23:18:29 +0000 (01:18 +0200)]
bus: fsl-mc: add the fsl_mc_get_endpoint function
Using the newly added fsl_mc_get_endpoint function a fsl-mc driver can
find its associated endpoint (another object at the other link of a MC
firmware link).
The API will be used in the following patch in order to discover the
connected DPMAC object of a DPNI.
Also, the fsl_mc_device_lookup function is made available to the entire
fsl-mc bus driver and not just for the dprc driver.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei [Wed, 30 Oct 2019 23:18:28 +0000 (01:18 +0200)]
bus: fsl-mc: export device types present on the bus
Export all device types present on the fsl-mc bus in order to be able to
actually use the is_fsl_mc_bus_*() functions from drivers on the bus.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 31 Oct 2019 21:14:53 +0000 (14:14 -0700)]
Merge branch 'sfc-Add-XDP-support'
Charles McLachlan says:
====================
sfc: Add XDP support
Supply the XDP callbacks in netdevice ops that enable lower level processing
of XDP frames.
Changes in v4:
- Handle the failure to send some frames in efx_xdp_tx_buffers() properly.
Changes in v3:
- Fix a BUG_ON when trying to allocate piobufs to xdp queues.
- Add a missed trace_xdp_exception.
Changes in v2:
- Use of xdp_return_frame_rx_napi() in tx.c
- Addition of xdp_rxq_info_valid and xdp_rxq_info_failed to track when
xdp_rxq_info failures occur.
- Renaming of rc to err and more use of unlikely().
- Cut some duplicated code and fix an array overrun.
- Actually increment n_rx_xdp_tx when packets are transmitted.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Charles McLachlan [Thu, 31 Oct 2019 10:24:23 +0000 (10:24 +0000)]
sfc: add XDP counters to ethtool stats
Count XDP packet drops, error drops, transmissions and redirects and
expose these counters via the ethtool stats command.
Signed-off-by: Charles McLachlan <cmclachlan@solarflare.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Charles McLachlan [Thu, 31 Oct 2019 10:24:12 +0000 (10:24 +0000)]
sfc: handle XDP_TX outcomes of XDP eBPF programs
Provide an ndo_xdp_xmit function that uses the XDP tx queue for this
CPU to send the packet.
Signed-off-by: Charles McLachlan <cmclachlan@solarflare.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Charles McLachlan [Thu, 31 Oct 2019 10:23:49 +0000 (10:23 +0000)]
sfc: allocate channels for XDP tx queues
Each CPU needs access to its own queue to allow uncontested
transmission of XDP_TX packets. This means we need to allocate (up
front) enough channels ("xdp transmit channels") to provide at least
one extra tx queue per CPU. These tx queues should not do TSO.
Signed-off-by: Charles McLachlan <cmclachlan@solarflare.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Charles McLachlan [Thu, 31 Oct 2019 10:23:37 +0000 (10:23 +0000)]
sfc: Enable setting of xdp_prog
Provide an ndo_bpf function to efx_netdev_ops that allows setting and
querying of xdp programs on an interface.
Also check that the MTU size isn't too big when setting a program or
when the MTU is explicitly set.
Signed-off-by: Charles McLachlan <cmclachlan@solarflare.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Charles McLachlan [Thu, 31 Oct 2019 10:23:23 +0000 (10:23 +0000)]
sfc: perform XDP processing on received packets
Adds a field to hold an attached xdp_prog, but never populates it (see
following patch). Also, XDP_TX support is deferred to a later patch
in the series.
Track failures of xdp_rxq_info_reg() via per-queue xdp_rxq_info_valid
flags and a per-nic xdp_rxq_info_failed flag. The per-queue flags are
needed to prevent attempts to xdp_rxq_info_unreg() structs that failed
to register. Possibly the API could be changed in the future to avoid
the need for these flags.
Signed-off-by: Charles McLachlan <cmclachlan@solarflare.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Charles McLachlan [Thu, 31 Oct 2019 10:23:10 +0000 (10:23 +0000)]
sfc: support encapsulation of xdp_frames in efx_tx_buffer
Add a field to efx_tx_buffer so that we can track xdp_frames. Add a
flag so that buffers that contain xdp_frames can be identified and
passed to xdp_return_frame.
Signed-off-by: Charles McLachlan <cmclachlan@solarflare.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Manfred Rudigier [Thu, 15 Aug 2019 20:55:19 +0000 (13:55 -0700)]
igb: Enable media autosense for the i350.
This patch enables the hardware feature "Media Auto Sense" also on the
i350. It works in the same way as on the 82850 devices. Hardware designs
using dual PHYs (fiber/copper) can enable this feature by setting the MAS
enable bits in the NVM_COMPAT register (0x03) in the EEPROM.
Signed-off-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Lyude Paul [Thu, 22 Aug 2019 18:33:18 +0000 (14:33 -0400)]
igb/igc: Don't warn on fatal read failures when the device is removed
Fatal read errors are worth warning about, unless of course the device
was just unplugged from the machine - something that's a rather normal
occurrence when the igb/igc adapter is located on a Thunderbolt dock. So,
let's only WARN() if there's a fatal read error while the device is
still present.
This fixes the following WARN splat that's been appearing whenever I
unplug my Caldigit TS3 Thunderbolt dock from my laptop:
igb 0000:09:00.0 enp9s0: PCIe link lost
------------[ cut here ]------------
igb: Failed to read reg 0x18!
WARNING: CPU: 7 PID: 516 at
drivers/net/ethernet/intel/igb/igb_main.c:756 igb_rd32+0x57/0x6a [igb]
Modules linked in: igb dca thunderbolt fuse vfat fat elan_i2c mei_wdt
mei_hdcp i915 wmi_bmof intel_wmi_thunderbolt iTCO_wdt
iTCO_vendor_support x86_pkg_temp_thermal intel_powerclamp joydev
coretemp crct10dif_pclmul crc32_pclmul i2c_algo_bit ghash_clmulni_intel
intel_cstate drm_kms_helper intel_uncore syscopyarea sysfillrect
sysimgblt fb_sys_fops intel_rapl_perf intel_xhci_usb_role_switch mei_me
drm roles idma64 i2c_i801 ucsi_acpi typec_ucsi mei intel_lpss_pci
processor_thermal_device typec intel_pch_thermal intel_soc_dts_iosf
intel_lpss int3403_thermal thinkpad_acpi wmi int340x_thermal_zone
ledtrig_audio int3400_thermal acpi_thermal_rel acpi_pad video
pcc_cpufreq ip_tables serio_raw nvme nvme_core crc32c_intel uas
usb_storage e1000e i2c_dev
CPU: 7 PID: 516 Comm: kworker/u16:3 Not tainted 5.2.0-rc1Lyude-Test+ #14
Hardware name: LENOVO 20L8S2N800/20L8S2N800, BIOS N22ET35W (1.12 ) 04/09/2018
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
RIP: 0010:igb_rd32+0x57/0x6a [igb]
Code: 87 b8 fc ff ff 48 c7 47 08 00 00 00 00 48 c7 c6 33 42 9b c0 4c 89
c7 e8 47 45 cd dc 89 ee 48 c7 c7 43 42 9b c0 e8 c1 94 71 dc <0f> 0b eb
08 8b 00 ff c0 75 b0 eb c8 44 89 e0 5d 41 5c c3 0f 1f 44
RSP: 0018:
ffffba5801cf7c48 EFLAGS:
00010286
RAX:
0000000000000000 RBX:
ffff9e7956608840 RCX:
0000000000000007
RDX:
0000000000000000 RSI:
ffffba5801cf7b24 RDI:
ffff9e795e3d6a00
RBP:
0000000000000018 R08:
000000009dec4a01 R09:
ffffffff9e61018f
R10:
0000000000000000 R11:
ffffba5801cf7ae5 R12:
00000000ffffffff
R13:
ffff9e7956608840 R14:
ffff9e795a6f10b0 R15:
0000000000000000
FS:
0000000000000000(0000) GS:
ffff9e795e3c0000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000564317bc4088 CR3:
000000010e00a006 CR4:
00000000003606e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
igb_release_hw_control+0x1a/0x30 [igb]
igb_remove+0xc5/0x14b [igb]
pci_device_remove+0x3b/0x93
device_release_driver_internal+0xd7/0x17e
pci_stop_bus_device+0x36/0x75
pci_stop_bus_device+0x66/0x75
pci_stop_bus_device+0x66/0x75
pci_stop_and_remove_bus_device+0xf/0x19
trim_stale_devices+0xc5/0x13a
? __pm_runtime_resume+0x6e/0x7b
trim_stale_devices+0x103/0x13a
? __pm_runtime_resume+0x6e/0x7b
trim_stale_devices+0x103/0x13a
acpiphp_check_bridge+0xd8/0xf5
acpiphp_hotplug_notify+0xf7/0x14b
? acpiphp_check_bridge+0xf5/0xf5
acpi_device_hotplug+0x357/0x3b5
acpi_hotplug_work_fn+0x1a/0x23
process_one_work+0x1a7/0x296
worker_thread+0x1a8/0x24c
? process_scheduled_works+0x2c/0x2c
kthread+0xe9/0xee
? kthread_destroy_worker+0x41/0x41
ret_from_fork+0x35/0x40
---[ end trace
252bf10352c63d22 ]---
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes:
47e16692b26b ("igb/igc: warn when fatal read failure happens")
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Acked-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>