clk: imx: imx6ul: Move csi_sel mux to correct base register

[ Upstream commit 2f9d61869640f732599ec36b984c2b5c46067519 ]

The csi_sel mux register is located in the CCM register base and not the
CCM_ANALOG register base. So move it to the correct position in code.

Otherwise changing the parent of the csi clock can lead to a complete
system failure due to the CCM_ANALOG_PLL_SYS_TOG register being falsely
modified.

Also remove the SET_RATE_PARENT flag since one possible supply for the
csi_sel mux is the system PLL which we don't want to modify.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20210927072857.3940880-1-s.riedmueller@phytec.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: hda-dai: fix potential locking issue

[ Upstream commit a20f3b10de61add5e14b6ce4df982f4df2a4cbbc ]

The initial hdac_stream code was adapted a third time with the same
locking issues. Move the spin_lock outside the loops and make sure the
fields are protected on read/write.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210924192417.169243-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: freescale: fix arm,sp805 compatible string

[ Upstream commit 99a7cacc66cae92db40139b57689be2af75fc6b8 ]

According to Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
the compatible is:
  compatible = "arm,sp805", "arm,primecell";

The current compatible string doesn't exist at all. Fix it.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: ipq6018: Fix qcom,controlled-remotely property

[ Upstream commit 3509de752ea14c7e5781b3a56a4a0bf832f5723a ]

Property qcom,controlled-remotely should be boolean.  Fix it.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210829111628.5543-2-shawn.guo@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8998: Fix CPU/L2 idle state latency and residency

[ Upstream commit 3f1dcaff642e75c1d2ad03f783fa8a3b1f56dd50 ]

The entry/exit latency and minimum residency in state for the idle
states of MSM8998 were ..bad: first of all, for all of them the
timings were written for CPU sleep but the min-residency-us param
was miscalculated (supposedly, while porting this from downstream);
Then, the power collapse states are setting PC on both the CPU
cluster *and* the L2 cache, which have different timings: in the
specific case of L2 the times are higher so these ones should be
taken into account instead of the CPU ones.

This parameter misconfiguration was not giving particular issues
because on MSM8998 there was no CPU scaling at all, so cluster/L2
power collapse was rarely (if ever) hit.
When CPU scaling is enabled, though, the wrong timings will produce
SoC unstability shown to the user as random, apparently error-less,
sudden reboots and/or lockups.

This set of parameters are stabilizing the SoC when CPU scaling is
ON and when power collapse is frequently hit.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901183123.1087392-3-angelogioacchino.delregno@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: BCM53016: Specify switch ports for Meraki MR32

[ Upstream commit 6abc4ca5a28070945e0d68cb4160b309bfbf4b8b ]

the switch identifies itself as a BCM53012 (rev 5)...
This patch has been tested & verified on OpenWrt's
snapshot with Linux 5.10 (didn't test any older kernels).
The MR32 is able to "talk to the network" as before with
OpenWrt's SWITCHDEV b53 driver.

| b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 5
| libphy: dsa slave smi: probed
| b53-srab-switch 18007000.ethernet-switch poe (uninitialized):
| PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL)
| b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB callbacks.
| Please migrate to PHYLINK!
| DSA: tree 0 setup

Reported-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8723bs: remove possible deadlock when disconnect (v2)

[ Upstream commit 54659ca026e586bbb33a7e60daa6443a3ac6b5df ]

when turning off a connection, lockdep complains with the
following warning (a modprobe has been done but the same
happens with a disconnection from NetworkManager,
it's enough to trigger a cfg80211_disconnect call):

[  682.855867] ======================================================
[  682.855877] WARNING: possible circular locking dependency detected
[  682.855887] 5.14.0-rc6+ #16 Tainted: G         C OE
[  682.855898] ------------------------------------------------------
[  682.855906] modprobe/1770 is trying to acquire lock:
[  682.855916] ffffb6d000332b00 (&pxmitpriv->lock){+.-.}-{2:2},
at: rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[  682.856073]
               but task is already holding lock:
[  682.856081] ffffb6d0003336a8 (&pstapriv->sta_hash_lock){+.-.}-{2:2},
at: rtw_free_assoc_resources+0x48/0x110 [r8723bs]
[  682.856207]
               which lock already depends on the new lock.

[  682.856215]
               the existing dependency chain (in reverse order) is:
[  682.856223]
               -> #1 (&pstapriv->sta_hash_lock){+.-.}-{2:2}:
[  682.856247]        _raw_spin_lock_bh+0x34/0x40
[  682.856265]        rtw_get_stainfo+0x9a/0x110 [r8723bs]
[  682.856389]        rtw_xmit_classifier+0x27/0x130 [r8723bs]
[  682.856515]        rtw_xmitframe_enqueue+0xa/0x20 [r8723bs]
[  682.856642]        rtl8723bs_hal_xmit+0x3b/0xb0 [r8723bs]
[  682.856752]        rtw_xmit+0x4ef/0x890 [r8723bs]
[  682.856879]        _rtw_xmit_entry+0xba/0x350 [r8723bs]
[  682.856981]        dev_hard_start_xmit+0xee/0x320
[  682.856999]        sch_direct_xmit+0x8c/0x330
[  682.857014]        __dev_queue_xmit+0xba5/0xf00
[  682.857030]        packet_sendmsg+0x981/0x1b80
[  682.857047]        sock_sendmsg+0x5b/0x60
[  682.857060]        __sys_sendto+0xf1/0x160
[  682.857073]        __x64_sys_sendto+0x24/0x30
[  682.857087]        do_syscall_64+0x3a/0x80
[  682.857102]        entry_SYSCALL_64_after_hwframe+0x44/0xae
[  682.857117]
               -> #0 (&pxmitpriv->lock){+.-.}-{2:2}:
[  682.857142]        __lock_acquire+0xfd9/0x1b50
[  682.857158]        lock_acquire+0xb4/0x2c0
[  682.857172]        _raw_spin_lock_bh+0x34/0x40
[  682.857185]        rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[  682.857308]        rtw_free_assoc_resources+0x53/0x110 [r8723bs]
[  682.857415]        cfg80211_rtw_disconnect+0x4b/0x70 [r8723bs]
[  682.857522]        cfg80211_disconnect+0x12e/0x2f0 [cfg80211]
[  682.857759]        cfg80211_leave+0x2b/0x40 [cfg80211]
[  682.857961]        cfg80211_netdev_notifier_call+0xa9/0x560 [cfg80211]
[  682.858163]        raw_notifier_call_chain+0x41/0x50
[  682.858180]        __dev_close_many+0x62/0x100
[  682.858195]        dev_close_many+0x7d/0x120
[  682.858209]        unregister_netdevice_many+0x416/0x680
[  682.858225]        unregister_netdevice_queue+0xab/0xf0
[  682.858240]        unregister_netdev+0x18/0x20
[  682.858255]        rtw_unregister_netdevs+0x28/0x40 [r8723bs]
[  682.858360]        rtw_dev_remove+0x24/0xd0 [r8723bs]
[  682.858463]        sdio_bus_remove+0x31/0xd0 [mmc_core]
[  682.858532]        device_release_driver_internal+0xf7/0x1d0
[  682.858550]        driver_detach+0x47/0x90
[  682.858564]        bus_remove_driver+0x77/0xd0
[  682.858579]        rtw_drv_halt+0xc/0x678 [r8723bs]
[  682.858685]        __x64_sys_delete_module+0x13f/0x250
[  682.858699]        do_syscall_64+0x3a/0x80
[  682.858715]        entry_SYSCALL_64_after_hwframe+0x44/0xae
[  682.858729]
               other info that might help us debug this:

[  682.858737]  Possible unsafe locking scenario:

[  682.858744]        CPU0                    CPU1
[  682.858751]        ----                    ----
[  682.858758]   lock(&pstapriv->sta_hash_lock);
[  682.858772]                                lock(&pxmitpriv->lock);
[  682.858786]                                lock(&pstapriv->sta_hash_lock);
[  682.858799]   lock(&pxmitpriv->lock);
[  682.858812]
                *** DEADLOCK ***

[  682.858820] 5 locks held by modprobe/1770:
[  682.858831]  #0: ffff8d870697d980 (&dev->mutex){....}-{3:3},
at: device_release_driver_internal+0x1a/0x1d0
[  682.858869]  #1: ffffffffbdbbf1c8 (rtnl_mutex){+.+.}-{3:3},
at: unregister_netdev+0xe/0x20
[  682.858906]  #2: ffff8d87054ee5e8 (&rdev->wiphy.mtx){+.+.}-{3:3},
at: cfg80211_netdev_notifier_call+0x9e/0x560 [cfg80211]
[  682.859131]  #3: ffff8d870f2bc8f0 (&wdev->mtx){+.+.}-{3:3},
at: cfg80211_leave+0x20/0x40 [cfg80211]
[  682.859354]  #4: ffffb6d0003336a8 (&pstapriv->sta_hash_lock){+.-.}-{2:2},
at: rtw_free_assoc_resources+0x48/0x110 [r8723bs]
[  682.859482]
               stack backtrace:
[  682.859491] CPU: 1 PID: 1770 Comm: modprobe Tainted: G
C OE     5.14.0-rc6+ #16
[  682.859507] Hardware name: LENOVO 80NR/Madrid, BIOS DACN25WW 08/20/2015
[  682.859517] Call Trace:
[  682.859531]  dump_stack_lvl+0x56/0x6f
[  682.859551]  check_noncircular+0xdb/0xf0
[  682.859579]  __lock_acquire+0xfd9/0x1b50
[  682.859606]  lock_acquire+0xb4/0x2c0
[  682.859623]  ? rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[  682.859752]  ? mark_held_locks+0x48/0x70
[  682.859769]  ? rtw_free_stainfo+0x4a/0x4a0 [r8723bs]
[  682.859898]  _raw_spin_lock_bh+0x34/0x40
[  682.859914]  ? rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[  682.860039]  rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[  682.860171]  rtw_free_assoc_resources+0x53/0x110 [r8723bs]
[  682.860286]  cfg80211_rtw_disconnect+0x4b/0x70 [r8723bs]
[  682.860397]  cfg80211_disconnect+0x12e/0x2f0 [cfg80211]
[  682.860629]  cfg80211_leave+0x2b/0x40 [cfg80211]
[  682.860836]  cfg80211_netdev_notifier_call+0xa9/0x560 [cfg80211]
[  682.861048]  ? __lock_acquire+0x4dc/0x1b50
[  682.861070]  ? lock_is_held_type+0xa8/0x110
[  682.861089]  ? lock_is_held_type+0xa8/0x110
[  682.861104]  ? find_held_lock+0x2d/0x90
[  682.861120]  ? packet_notifier+0x173/0x300
[  682.861141]  ? lock_release+0xb3/0x250
[  682.861160]  ? packet_notifier+0x192/0x300
[  682.861184]  raw_notifier_call_chain+0x41/0x50
[  682.861205]  __dev_close_many+0x62/0x100
[  682.861224]  dev_close_many+0x7d/0x120
[  682.861245]  unregister_netdevice_many+0x416/0x680
[  682.861264]  ? find_held_lock+0x2d/0x90
[  682.861284]  unregister_netdevice_queue+0xab/0xf0
[  682.861306]  unregister_netdev+0x18/0x20
[  682.861325]  rtw_unregister_netdevs+0x28/0x40 [r8723bs]
[  682.861434]  rtw_dev_remove+0x24/0xd0 [r8723bs]
[  682.861542]  sdio_bus_remove+0x31/0xd0 [mmc_core]
[  682.861615]  device_release_driver_internal+0xf7/0x1d0
[  682.861637]  driver_detach+0x47/0x90
[  682.861656]  bus_remove_driver+0x77/0xd0
[  682.861674]  rtw_drv_halt+0xc/0x678 [r8723bs]
[  682.861782]  __x64_sys_delete_module+0x13f/0x250
[  682.861801]  ? lockdep_hardirqs_on_prepare+0xf3/0x170
[  682.861817]  ? syscall_enter_from_user_mode+0x20/0x70
[  682.861836]  do_syscall_64+0x3a/0x80
[  682.861855]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  682.861873] RIP: 0033:0x7f6dbe85400b
[  682.861890] Code: 73 01 c3 48 8b 0d 6d 1e 0c 00 f7 d8 64 89
01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa
b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d
1e 0c 00 f7 d8 64 89 01 48
[  682.861906] RSP: 002b:00007ffe7a82f538 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[  682.861923] RAX: ffffffffffffffda RBX: 000055a64693bd20 RCX: 00007f6dbe85400b
[  682.861935] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055a64693bd88
[  682.861946] RBP: 000055a64693bd20 R08: 0000000000000000 R09: 0000000000000000
[  682.861957] R10: 00007f6dbe8c7ac0 R11: 0000000000000206 R12: 000055a64693bd88
[  682.861967] R13: 0000000000000000 R14: 000055a64693bd88 R15: 00007ffe7a831848

This happens because when we enqueue a frame for
transmission we do it under xmit_priv lock, then calling
rtw_get_stainfo (needed for enqueuing) takes sta_hash_lock
and this leads to the following lock dependency:

xmit_priv->lock -> sta_hash_lock

Turning off a connection will bring to call
rtw_free_assoc_resources which will set up
the inverse dependency:

sta_hash_lock -> xmit_priv_lock

This could lead to a deadlock as lockdep complains.

Fix it by removing the xmit_priv->lock around
rtw_xmitframe_enqueue call inside rtl8723bs_hal_xmit
and put it in a smaller critical section inside
rtw_xmit_classifier, the only place where
xmit_priv data are actually accessed.

Replace spin_{lock,unlock}_bh(pxmitpriv->lock)
in other tx paths leading to rtw_xmitframe_enqueue
call with spin_{lock,unlock}_bh(psta->sleep_q.lock)
- it's not clear why accessing a sleep_q was protected
by a spinlock on xmitpriv->lock.

This way is avoided the same faulty lock nesting
order.

Extra changes in v2 by Hans de Goede:
-Lift the taking of the struct __queue.lock spinlock out of
 rtw_free_xmitframe_queue() into the callers this allows also
 protecting a bunch of related state in rtw_free_stainfo():
-Protect psta->sleepq_len on rtw_free_xmitframe_queue(&psta->sleep_q);
-Protect struct tx_servq.tx_pending and tx_servq.qcnt when
 calling rtw_free_xmitframe_queue(&tx_servq.sta_pending)
-This also allows moving the spin_lock_bh(&pxmitpriv->lock); to below
 the sleep_q free-ing code, avoiding another ABBA locking issue

CC: Larry Finger <Larry.Finger@lwfinger.net>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Tested-on: Lenovo Ideapad MiiX 300-10IBY
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210920145502.155454-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: ux500: Skomer regulator fixes

[ Upstream commit 7aee0288beab72cdfa35af51f62e94373fca595d ]

AUX2 has slightly wrong voltage and AUX5 doesn't need to be
always on.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: tipd: Remove WARN_ON in tps6598x_block_read

[ Upstream commit b7a0a63f3fed57d413bb857de164ea9c3984bc4e ]

Calling tps6598x_block_read with a higher than allowed len can be
handled by just returning an error. There's no need to crash systems
with panic-on-warn enabled.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20210914140235.65955-3-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: musb: tusb6010: check return value after calling platform_get_resource()

[ Upstream commit 14651496a3de6807a17c310f63c894ea0c5d858e ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210915034925.2399823-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Use context lost quirk for otg

[ Upstream commit 9067839ff45a528bcb015cc2f24f656126b91e3f ]

Let's use SYSC_QUIRK_REINIT_ON_CTX_LOST quirk for am335x otg instead of
SYSC_QUIRK_REINIT_ON_RESUME quirk as we can now handle the context loss
in a more generic way.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Add quirk handling for reinit on context lost

[ Upstream commit 9d881361206ebcf6285c2ec2ef275aff80875347 ]

Some interconnect target modules such as otg and gpmc on am335x need a
re-init after resume. As we also have PM runtime cases where the context
may be lost, let's handle these all with cpu_pm.

For the am335x resume path, we already have cpu_pm_resume() call
cpu_pm_cluster_exit().

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/bnxt_re: Check if the vlan is valid before reporting

[ Upstream commit 6bda39149d4b8920fdb8744090653aca3daa792d ]

When VF is configured with default vlan, HW strips the vlan from the
packet and driver receives it in Rx completion. VLAN needs to be reported
for UD work completion only if the vlan is configured on the host. Add a
check for valid vlan in the UD receive path.

Link: https://lore.kernel.org/r/1631709163-2287-12-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: hisilicon: fix arm,sp805 compatible string

[ Upstream commit 894d4f1f77d0e88f1f81af2e1e37333c1c41b631 ]

According to Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
the compatible is:
  compatible = "arm,sp805", "arm,primecell";

The current compatible string doesn't exist at all. Fix it.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: Disable CDN DP on Pinebook Pro

[ Upstream commit 2513fa5c25d42f55ca5f0f0ab247af7c9fbfa3b1 ]

The CDN DP needs a PHY and a extcon to work correctly. But no extcon is
provided by the device-tree, which leads to an error:
cdn-dp fec00000.dp: [drm:cdn_dp_probe [rockchipdrm]] *ERROR* missing extcon or phy
cdn-dp: probe of fec00000.dp failed with error -22

Disable the CDN DP to make graphic work on the Pinebook Pro.

Reported-by: Guillaume Gardet <guillaume.gardet@arm.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Link: https://lore.kernel.org/r/20210715164101.11486-1-matthias.bgg@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq()

[ Upstream commit 99154581b05c8fb22607afb7c3d66c1bace6aa5d ]

When parsing the txq list in lpfc_drain_txq(), the driver attempts to pass
the requests to the adapter. If such an attempt fails, a local "fail_msg"
string is set and a log message output.  The job is then added to a
completions list for cancellation.

Processing of any further jobs from the txq list continues, but since
"fail_msg" remains set, jobs are added to the completions list regardless
of whether a wqe was passed to the adapter.  If successfully added to
txcmplq, jobs are added to both lists resulting in list corruption.

Fix by clearing the fail_msg string after adding a job to the completions
list. This stops the subsequent jobs from being added to the completions
list unless they had an appropriate failure.

Link: https://lore.kernel.org/r/20210910233159.115896-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: NSP: Fix mpcore, mmc node names

[ Upstream commit 15a563d008ef9d04df525f0c476cd7d7127bb883 ]

Running dtbs_check yielded the issues with bcm-nsp.dtsi.

Firstly this patch fixes the following message by appending "-bus" to
the mpcore node name:
mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Secondly mmc node name. The label name can remain as is.
sdhci@21000: $nodename:0: 'sdhci@21000' does not match '^mmc(@.*)?$'

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: wfx: ensure IRQ is ready before enabling it

[ Upstream commit 5e57c668dc097c6c27c973504706edec53f79281 ]

Since commit 5561770f80b1 ("staging: wfx: repair external IRQ for
SDIO"), wfx_sdio_irq_subscribe() enforce the device to use IRQs.
However, there is currently a race in this code. An IRQ may happen
before the IRQ has been registered.

The problem has observed during debug session when the device crashes
before the IRQ set up:

    [ 1.546] wfx-sdio mmc0:0001:1: started firmware 3.12.2 "WF200_ASIC_WFM_(Jenkins)_FW3.12.2" (API: 3.7, keyset: C0, caps: 0x00000002)
    [ 2.559] wfx-sdio mmc0:0001:1: time out while polling control register
    [ 3.565] wfx-sdio mmc0:0001:1: chip is abnormally long to answer
    [ 6.563] wfx-sdio mmc0:0001:1: chip did not answer
    [ 6.568] wfx-sdio mmc0:0001:1: hardware request CONFIGURATION (0x09) on vif 2 returned error -110
    [ 6.577] wfx-sdio mmc0:0001:1: PDS bytes 0 to 12: chip didn't reply (corrupted file?)
    [ 6.585] Unable to handle kernel NULL pointer dereference at virtual address 00000000
    [ 6.592] pgd = c0004000
    [ 6.595] [00000000] *pgd=00000000
    [ 6.598] Internal error: Oops - BUG: 17 [#1] THUMB2
    [ 6.603] Modules linked in:
    [ 6.606] CPU: 0 PID: 23 Comm: kworker/u2:1 Not tainted 3.18.19 #78
    [ 6.612] Workqueue: kmmcd mmc_rescan
    [ 6.616] task: c176d100 ti: c0e50000 task.ti: c0e50000
    [ 6.621] PC is at wake_up_process+0xa/0x14
    [ 6.625] LR is at sdio_irq+0x61/0x250
    [ 6.629] pc : [<c001e8ae>] lr : [<c00ec5bd>] psr: 600001b3
    [ 6.629] sp : c0e51bd8 ip : c0e51cc8 fp : 00000001
    [ 6.640] r10: 00000003 r9 : 00000000 r8 : c0003c34
    [ 6.644] r7 : c0e51bd8 r6 : c0003c30 r5 : 00000001 r4 : c0e78c00
    [ 6.651] r3 : 00000000 r2 : 00000000 r1 : 00000003 r0 : 00000000
    [ 6.657] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA Thumb Segment kernel
    [ 6.664] Control: 50c53c7d Table: 11fd8059 DAC: 00000015
    [ 6.670] Process kworker/u2:1 (pid: 23, stack limit = 0xc0e501b0)
    [ 6.676] Stack: (0xc0e51bd8 to 0xc0e52000)
    [...]
    [ 6.949] [<c001e8ae>] (wake_up_process) from [<c00ec5bd>] (sdio_irq+0x61/0x250)
    [ 6.956] [<c00ec5bd>] (sdio_irq) from [<c0025099>] (handle_irq_event_percpu+0x17/0x92)
    [ 6.964] [<c0025099>] (handle_irq_event_percpu) from [<c002512f>] (handle_irq_event+0x1b/0x24)
    [ 6.973] [<c002512f>] (handle_irq_event) from [<c0026577>] (handle_level_irq+0x5d/0x76)
    [ 6.981] [<c0026577>] (handle_level_irq) from [<c0024cc3>] (generic_handle_irq+0x13/0x1c)
    [ 6.989] [<c0024cc3>] (generic_handle_irq) from [<c0024dd9>] (__handle_domain_irq+0x31/0x48)
    [ 6.997] [<c0024dd9>] (__handle_domain_irq) from [<c0008359>] (ov_handle_irq+0x31/0xe0)
    [ 7.005] [<c0008359>] (ov_handle_irq) from [<c000af5b>] (__irq_svc+0x3b/0x5c)
    [ 7.013] Exception stack(0xc0e51c68 to 0xc0e51cb0)
    [...]
    [ 7.038] [<c000af5b>] (__irq_svc) from [<c01775aa>] (wait_for_common+0x9e/0xc4)
    [ 7.045] [<c01775aa>] (wait_for_common) from [<c00e1dc3>] (mmc_wait_for_req+0x4b/0xdc)
    [ 7.053] [<c00e1dc3>] (mmc_wait_for_req) from [<c00e1e83>] (mmc_wait_for_cmd+0x2f/0x34)
    [ 7.061] [<c00e1e83>] (mmc_wait_for_cmd) from [<c00e7b2b>] (mmc_io_rw_direct_host+0x71/0xac)
    [ 7.070] [<c00e7b2b>] (mmc_io_rw_direct_host) from [<c00e8f79>] (sdio_claim_irq+0x6b/0x116)
    [ 7.078] [<c00e8f79>] (sdio_claim_irq) from [<c00d8415>] (wfx_sdio_irq_subscribe+0x19/0x94)
    [ 7.086] [<c00d8415>] (wfx_sdio_irq_subscribe) from [<c00d5229>] (wfx_probe+0x189/0x2ac)
    [ 7.095] [<c00d5229>] (wfx_probe) from [<c00d83bf>] (wfx_sdio_probe+0x8f/0xcc)
    [ 7.102] [<c00d83bf>] (wfx_sdio_probe) from [<c00e7fbb>] (sdio_bus_probe+0x5f/0xa8)
    [ 7.109] [<c00e7fbb>] (sdio_bus_probe) from [<c00be229>] (driver_probe_device+0x59/0x134)
    [ 7.118] [<c00be229>] (driver_probe_device) from [<c00bd4d7>] (bus_for_each_drv+0x3f/0x4a)
    [ 7.126] [<c00bd4d7>] (bus_for_each_drv) from [<c00be1a5>] (device_attach+0x3b/0x52)
    [ 7.134] [<c00be1a5>] (device_attach) from [<c00bdc2b>] (bus_probe_device+0x17/0x4c)
    [ 7.141] [<c00bdc2b>] (bus_probe_device) from [<c00bcd69>] (device_add+0x2c5/0x334)
    [ 7.149] [<c00bcd69>] (device_add) from [<c00e80bf>] (sdio_add_func+0x23/0x44)
    [ 7.156] [<c00e80bf>] (sdio_add_func) from [<c00e79eb>] (mmc_attach_sdio+0x187/0x1ec)
    [ 7.164] [<c00e79eb>] (mmc_attach_sdio) from [<c00e31bd>] (mmc_rescan+0x18d/0x1fc)
    [ 7.172] [<c00e31bd>] (mmc_rescan) from [<c001a14f>] (process_one_work+0xd7/0x170)
    [ 7.179] [<c001a14f>] (process_one_work) from [<c001a59b>] (worker_thread+0x103/0x1bc)
    [ 7.187] [<c001a59b>] (worker_thread) from [<c001c731>] (kthread+0x7d/0x90)
    [ 7.194] [<c001c731>] (kthread) from [<c0008ce1>] (ret_from_fork+0x11/0x30)
    [ 7.201] Code: 2103 b580 2200 af00 (681b) 46bd
    [ 7.206] ---[ end trace 3ab50aced42eedb4 ]---

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20210913130203.1903622-33-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: a100: Fix thermal zone node name

[ Upstream commit 5c34c4e46e601554bfa370b23c8ae3c3c734e9f7 ]

The thermal zones one the A100 are called $device-thermal-zone.

However, the thermal zone binding explicitly requires that zones are
called *-thermal. Let's fix it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-50-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: h5: Fix GPU thermal zone node name

[ Upstream commit 94a0f2b0e4e0953d8adf319c44244ef7a57de32c ]

The GPU thermal zone is named gpu_thermal. However, the underscore is
an invalid character for a node name and the thermal zone binding
explicitly requires that zones are called *-thermal. Let's fix it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-48-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: sunxi: Fix OPPs node name

[ Upstream commit ffbe853a3f5a37fa0a511265b21abf097ffdbe45 ]

The operating-points-v2 nodes are named inconsistently, but mostly
either opp_table0 or gpu-opp-table.  However, the underscore is an
invalid character for a node name and the thermal zone binding
explicitly requires that zones are called opp-table-*. Let's fix it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-43-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: zynqmp: Fix serial compatible string

[ Upstream commit 812fa2f0e9d33564bd0131a69750e0d165f4c82a ]

Based on commit 65a2c14d4f00 ("dt-bindings: serial: convert Cadence UART
bindings to YAML") compatible string should look like differently that's
why fix it to be aligned with dt binding.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/89b36e0a6187cc6b05b27a035efdf79173bd4486.1628240307.git.michal.simek@xilinx.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: zynqmp: Do not duplicate flash partition label property

[ Upstream commit 167721a5909f867f8c18c8e78ea58e705ad9bbd4 ]

In kernel 5.4, support has been added for reading MTD devices via the nvmem
API.
For this the mtd devices are registered as read-only NVMEM providers under
sysfs with the same name as the flash partition label property.

So if flash partition label property of multiple flash devices are
identical then the second mtd device fails to get registered as a NVMEM
provider.

This patch fixes the issue by having different label property for different
flashes.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/6c4b9b9232b93d9e316a63c086540fd5bf6b8687.1623684253.git.michal.simek@xilinx.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.10.81

Link: https://lore.kernel.org/r/20211119171443.892729043@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/x86/iopl: Adjust to the faked iopl CLI/STI usage

commit a72fdfd21e01c626273ddcf5ab740d4caef4be54 upstream.

Commit in Fixes changed the iopl emulation to not #GP on CLI and STI
because it would break some insane luserspace tools which would toggle
interrupts.

The corresponding selftest would rely on the fact that executing CLI/STI
would trigger a #GP and thus detect it this way but since that #GP is
not happening anymore, the detection is now wrong too.

Extend the test to actually look at the IF flag and whether executing
those insns had any effect on it. The STI detection needs to have the
fact that interrupts were previously disabled, passed in so do that from
the previous CLI test, i.e., STI test needs to follow a previous CLI one
for it to make sense.

Fixes: b968e84b509d ("x86/iopl: Fake iopl(3) CLI/STI usage")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20211030083939.13073-1-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: Fix NULL pointer dereferences in of_thermal_ functions

commit 96cfe05051fd8543cdedd6807ec59a0e6c409195 upstream.

of_parse_thermal_zones() parses the thermal-zones node and registers a
thermal_zone device for each subnode. However, if a thermal zone is
consuming a thermal sensor and that thermal sensor device hasn't probed
yet, an attempt to set trip_point_*_temp for that thermal zone device
can cause a NULL pointer dereference. Fix it.

 console:/sys/class/thermal/thermal_zone87 # echo 120000 > trip_point_0_temp
 ...
 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
 ...
 Call trace:
  of_thermal_set_trip_temp+0x40/0xc4
  trip_point_temp_store+0xc0/0x1dc
  dev_attr_store+0x38/0x88
  sysfs_kf_write+0x64/0xc0
  kernfs_fop_write_iter+0x108/0x1d0
  vfs_write+0x2f4/0x368
  ksys_write+0x7c/0xec
  __arm64_sys_write+0x20/0x30
  el0_svc_common.llvm.7279915941325364641+0xbc/0x1bc
  do_el0_svc+0x28/0xa0
  el0_svc+0x14/0x24
  el0_sync_handler+0x88/0xec
  el0_sync+0x1c0/0x200

While at it, fix the possible NULL pointer dereference in other
functions as well: of_thermal_get_temp(), of_thermal_set_emul_temp(),
of_thermal_get_trend().

Suggested-by: David Collins <quic_collinsd@quicinc.com>
Signed-off-by: Subbaraman Narayanamurthy <quic_subbaram@quicinc.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/core: Avoid put_page() when GUP fails

commit 4716023a8f6a0f4a28047f14dd7ebdc319606b84 upstream.

PEBS PERF_SAMPLE_PHYS_ADDR events use perf_virt_to_phys() to convert PMU
sampled virtual addresses to physical using get_user_page_fast_only()
and page_to_phys().

Some get_user_page_fast_only() error cases return false, indicating no
page reference, but still initialize the output page pointer with an
unreferenced page. In these error cases perf_virt_to_phys() calls
put_page(). This causes page reference count underflow, which can lead
to unintentional page sharing.

Fix perf_virt_to_phys() to only put_page() if get_user_page_fast_only()
returns a referenced page.

Fixes: fc7ce9c74c3ad ("perf/core, x86: Add PERF_SAMPLE_PHYS_ADDR")
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211111021814.757086-1-gthelen@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts/lld-version.sh: Rewrite based on upstream ld-version.sh

This patch is for linux-5.10.y only.

When scripts/lld-version.sh was initially written, it did not account
for the LLD_VENDOR cmake flag, which changes the output of ld.lld's
--version flag slightly.

Without LLD_VENDOR:

$ ld.lld --version
LLD 14.0.0 (compatible with GNU linkers)

With LLD_VENDOR:

$ ld.lld --version
Debian LLD 14.0.0 (compatible with GNU linkers)

As a result, CONFIG_LLD_VERSION is messed up and configuration values
that are dependent on it cannot be selected:

scripts/lld-version.sh: 20: printf: LLD: expected numeric value
scripts/lld-version.sh: 20: printf: LLD: expected numeric value
scripts/lld-version.sh: 20: printf: LLD: expected numeric value
init/Kconfig:52:warning: 'LLD_VERSION': number is invalid
.config:11:warning: symbol value '00000' invalid for LLD_VERSION
.config:8800:warning: override: CPU_BIG_ENDIAN changes choice state

This was fixed upstream by commit 1f09af062556 ("kbuild: Fix
ld-version.sh script if LLD was built with LLD_VENDOR") in 5.12 but that
was done to ld-version.sh after it was massively rewritten in
commit 02aff8592204 ("kbuild: check the minimum linker version in
Kconfig").

To avoid bringing in that change plus its prerequisites and fixes, just
modify lld-version.sh to make it similar to the upstream ld-version.sh,
which handles ld.lld with or without LLD_VENDOR and ld.bfd without any
errors.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

erofs: fix unsafe pagevec reuse of hooked pclusters

commit 86432a6dca9bed79111990851df5756d3eb5f57c upstream.

There are pclusters in runtime marked with Z_EROFS_PCLUSTER_TAIL
before actual I/O submission. Thus, the decompression chain can be
extended if the following pcluster chain hooks such tail pcluster.

As the related comment mentioned, if some page is made of a hooked
pcluster and another followed pcluster, it can be reused for in-place
I/O (since I/O should be submitted anyway):
 _______________________________________________________________
|  tail (partial) page |          head (partial) page           |
|_____PRIMARY_HOOKED___|____________PRIMARY_FOLLOWED____________|

However, it's by no means safe to reuse as pagevec since if such
PRIMARY_HOOKED pclusters finally move into bypass chain without I/O
submission. It's somewhat hard to reproduce with LZ4 and I just found
it (general protection fault) by ro_fsstressing a LZMA image for long
time.

I'm going to actively clean up related code together with multi-page
folio adaption in the next few months. Let's address it directly for
easier backporting for now.

Call trace for reference:
  z_erofs_decompress_pcluster+0x10a/0x8a0 [erofs]
  z_erofs_decompress_queue.isra.36+0x3c/0x60 [erofs]
  z_erofs_runqueue+0x5f3/0x840 [erofs]
  z_erofs_readahead+0x1e8/0x320 [erofs]
  read_pages+0x91/0x270
  page_cache_ra_unbounded+0x18b/0x240
  filemap_get_pages+0x10a/0x5f0
  filemap_read+0xa9/0x330
  new_sync_read+0x11b/0x1a0
  vfs_read+0xf1/0x190

Link: https://lore.kernel.org/r/20211103182006.4040-1-xiang@kernel.org
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

erofs: remove the occupied parameter from z_erofs_pagevec_enqueue()

commit 7dea3de7d384f4c8156e8bd93112ba6db1eb276c upstream.

No any behavior to variable occupied in z_erofs_attach_page() which
is only caller to z_erofs_pagevec_enqueue().

Link: https://lore.kernel.org/r/20210419102623.2015-1-zbestahu@gmail.com
Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Gao Xiang <xiang@kernel.org>
Signed-off-by: Gao Xiang <xiang@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add MSI masking quirk for Nvidia ION AHCI

commit f21082fb20dbfb3e42b769b59ef21c2a7f2c7c1f upstream.

The ION AHCI device pretends that MSI masking isn't a thing, while it
actually implements it and needs MSIs to be unmasked to work. Add a quirk
to that effect.

Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Link: https://lore.kernel.org/r/CALjTZvbzYfBuLB+H=fj2J+9=DxjQ2Uqcy0if_PvmJ-nU-qEgkg@mail.gmail.com
Link: https://lore.kernel.org/r/20211104180130.3825416-3-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/MSI: Deal with devices lying about their MSI mask capability

commit 2226667a145db2e1f314d7f57fd644fe69863ab9 upstream.

It appears that some devices are lying about their mask capability,
pretending that they don't have it, while they actually do.
The net result is that now that we don't enable MSIs on such
endpoint.

Add a new per-device flag to deal with this. Further patches will
make use of it, sadly.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20211104180130.3825416-2-maz@kernel.org
Cc: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/MSI: Destroy sysfs before freeing entries

commit 3735459037114d31e5acd9894fad9aed104231a0 upstream.

free_msi_irqs() frees the MSI entries before destroying the sysfs entries
which are exposing them. Nothing prevents a concurrent free while a sysfs
file is read and accesses the possibly freed entry.

Move the sysfs release ahead of freeing the entries.

Fixes: 1c51b50c2995 ("PCI/MSI: Export MSI mode using attributes, not kobjects")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87sfw5305m.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc/entry: fix trace test in syscall exit path

commit 3ec18fc7831e7d79e2d536dd1f3bc0d3ba425e8a upstream.

commit 8779e05ba8aa ("parisc: Fix ptrace check on syscall return")
fixed testing of TI_FLAGS. This uncovered a bug in the test mask.
syscall_restore_rfi is only used when the kernel needs to exit to
usespace with single or block stepping and the recovery counter
enabled. The test however used _TIF_SYSCALL_TRACE_MASK, which
includes a lot of bits that shouldn't be tested here.

Fix this by using TIF_SINGLESTEP and TIF_BLOCKSTEP directly.

I encountered this bug by enabling syscall tracepoints. Both in qemu and
on real hardware. As soon as i enabled the tracepoint (sys_exit_read,
but i guess it doesn't really matter which one), i got random page
faults in userspace almost immediately.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/iopl: Fake iopl(3) CLI/STI usage

commit b968e84b509da593c50dc3db679e1d33de701f78 upstream.

Since commit c8137ace5638 ("x86/iopl: Restrict iopl() permission
scope") it's possible to emulate iopl(3) using ioperm(), except for
the CLI/STI usage.

Userspace CLI/STI usage is very dubious (read broken), since any
exception taken during that window can lead to rescheduling anyway (or
worse). The IOPL(2) manpage even states that usage of CLI/STI is highly
discouraged and might even crash the system.

Of course, that won't stop people and HP has the dubious honour of
being the first vendor to be found using this in their hp-health
package.

In order to enable this 'software' to still 'work', have the #GP treat
the CLI/STI instructions as NOPs when iopl(3). Warn the user that
their program is doing dubious things.

Fixes: a24ca9976843 ("x86/iopl: Remove legacy IOPL option")
Reported-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org # v5.5+
Link: https://lkml.kernel.org/r/20210918090641.GD5106@worktop.programming.kicks-ass.net
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warnings

commit 2d26f6e39afb88d32b8f39e76a51b542c3c51674 upstream.

This reverts commit 2c896fb02e7f65299646f295a007bda043e0f382
"net: stmmac: dwmac-rk: add pd_gmac support for rk3399" and fixes
unbalanced pm_runtime_enable warnings.

In the commit to be reverted, support for power management was
introduced to the Rockchip glue code. Later, power management support
was introduced to the stmmac core code, resulting in multiple
invocations of pm_runtime_{enable,disable,get_sync,put_sync}.

The multiple invocations happen in rk_gmac_powerup and
stmmac_{dvr_probe, resume} as well as in rk_gmac_powerdown and
stmmac_{dvr_remove, suspend}, respectively, which are always called
in conjunction.

Fixes: 5ec55823438e850c91c6b92aec93fb04ebde29e2 ("net: stmmac: add clocks management for gmac driver")
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: fix issue where clk is being unprepared twice

commit ab00f3e051e851a8458f0d0eb1bb426deadb6619 upstream.

In the case of MDIO bus registration failure due to no external PHY
devices is connected to the MAC, clk_disable_unprepare() is called in
stmmac_bus_clk_config() and intel_eth_pci_probe() respectively.

The second call in intel_eth_pci_probe() will caused the following:-

[   16.578605] intel-eth-pci 0000:00:1e.5: No PHY found
[   16.583778] intel-eth-pci 0000:00:1e.5: stmmac_dvr_probe: MDIO bus (id: 2) registration failed
[   16.680181] ------------[ cut here ]------------
[   16.684861] stmmac-0000:00:1e.5 already disabled
[   16.689547] WARNING: CPU: 13 PID: 2053 at drivers/clk/clk.c:952 clk_core_disable+0x96/0x1b0
[   16.697963] Modules linked in: dwc3 iTCO_wdt mei_hdcp iTCO_vendor_support udc_core x86_pkg_temp_thermal kvm_intel marvell10g kvm sch_fq_codel nfsd irqbypass dwmac_intel(+) stmmac uio ax88179_178a pcs_xpcs phylink uhid spi_pxa2xx_platform usbnet mei_me pcspkr tpm_crb mii i2c_i801 dw_dmac dwc3_pci thermal dw_dmac_core intel_rapl_msr libphy i2c_smbus mei tpm_tis intel_th_gth tpm_tis_core tpm intel_th_acpi intel_pmc_core intel_th i915 fuse configfs snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_pcm snd_timer snd soundcore
[   16.746785] CPU: 13 PID: 2053 Comm: systemd-udevd Tainted: G     U            5.13.0-rc3-intel-lts #76
[   16.756134] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DRR4 CRB, BIOS ADLIFSI1.R00.1494.B00.2012031421 12/03/2020
[   16.769465] RIP: 0010:clk_core_disable+0x96/0x1b0
[   16.774222] Code: 00 8b 05 45 96 17 01 85 c0 7f 24 48 8b 5b 30 48 85 db 74 a5 8b 43 7c 85 c0 75 93 48 8b 33 48 c7 c7 6e 32 cc b7 e8 b2 5d 52 00 <0f> 0b 5b 5d c3 65 8b 05 76 31 18 49 89 c0 48 0f a3 05 bc 92 1a 01
[   16.793016] RSP: 0018:ffffa44580523aa0 EFLAGS: 00010086
[   16.798287] RAX: 0000000000000000 RBX: ffff8d7d0eb70a00 RCX: 0000000000000000
[   16.805435] RDX: 0000000000000002 RSI: ffffffffb7c62d5f RDI: 00000000ffffffff
[   16.812610] RBP: 0000000000000287 R08: 0000000000000000 R09: ffffa445805238d0
[   16.819759] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8d7d0eb70a00
[   16.826904] R13: ffff8d7d027370c8 R14: 0000000000000006 R15: ffffa44580523ad0
[   16.834047] FS:  00007f9882fa2600(0000) GS:ffff8d80a0940000(0000) knlGS:0000000000000000
[   16.842177] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.847966] CR2: 00007f9882bea3d8 CR3: 000000010b126001 CR4: 0000000000370ee0
[   16.855144] Call Trace:
[   16.857614]  clk_core_disable_lock+0x1b/0x30
[   16.861941]  intel_eth_pci_probe.cold+0x11d/0x136 [dwmac_intel]
[   16.867913]  pci_device_probe+0xcf/0x150
[   16.871890]  really_probe+0xf5/0x3e0
[   16.875526]  driver_probe_device+0x64/0x150
[   16.879763]  device_driver_attach+0x53/0x60
[   16.883998]  __driver_attach+0x9f/0x150
[   16.887883]  ? device_driver_attach+0x60/0x60
[   16.892288]  ? device_driver_attach+0x60/0x60
[   16.896698]  bus_for_each_dev+0x77/0xc0
[   16.900583]  bus_add_driver+0x184/0x1f0
[   16.904469]  driver_register+0x6c/0xc0
[   16.908268]  ? 0xffffffffc07ae000
[   16.911598]  do_one_initcall+0x4a/0x210
[   16.915489]  ? kmem_cache_alloc_trace+0x305/0x4e0
[   16.920247]  do_init_module+0x5c/0x230
[   16.924057]  load_module+0x2894/0x2b70
[   16.927857]  ? __do_sys_finit_module+0xb5/0x120
[   16.932441]  __do_sys_finit_module+0xb5/0x120
[   16.936845]  do_syscall_64+0x42/0x80
[   16.940476]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   16.945586] RIP: 0033:0x7f98830e5ccd
[   16.949177] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 93 31 0c 00 f7 d8 64 89 01 48
[   16.967970] RSP: 002b:00007ffc66b60168 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[   16.975583] RAX: ffffffffffffffda RBX: 000055885de35ef0 RCX: 00007f98830e5ccd
[   16.982725] RDX: 0000000000000000 RSI: 00007f98832541e3 RDI: 0000000000000012
[   16.989868] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000
[   16.997042] R10: 0000000000000012 R11: 0000000000000246 R12: 00007f98832541e3
[   17.004222] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffc66b60328
[   17.011369] ---[ end trace df06a3dab26b988c ]---
[   17.016062] ------------[ cut here ]------------
[   17.020701] stmmac-0000:00:1e.5 already unprepared

Removing the stmmac_bus_clks_config() call in stmmac_dvr_probe and let
dwmac-intel to handle the unprepare and disable of the clk device.

Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver")
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: fix system hang if change mac address after interface ifdown

commit 4691ffb18ac908609aab07d13af7995b6b89d33c upstream.

Fix system hang with below sequences:
~# ifconfig ethx down
~# ifconfig ethx hw ether xx:xx:xx:xx:xx:xx

After ethx down, stmmac all clocks gated off and then register access causes
system hang.

Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: fix missing unlock on error in stmmac_suspend()

commit 30f347ae7cc1178c431f968a89d4b4a375bc0d39 upstream

Add the missing unlock before return from stmmac_suspend()
in the error handling case.

Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: platform: fix build error with !CONFIG_PM_SLEEP

commit 7ec05a6035480f3a5934b2b31222620b2e906163 upstream

Get rid of the CONFIG_PM_SLEEP ifdefery to fix the build error
and use __maybe_unused for the suspend()/resume() hooks to avoid
build warning:

drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:769:21:
 error: 'stmmac_runtime_suspend' undeclared here (not in a function); did you mean 'stmmac_suspend'?
  769 |  SET_RUNTIME_PM_OPS(stmmac_runtime_suspend, stmmac_runtime_resume, NULL)
      |                     ^~~~~~~~~~~~~~~~~~~~~~
./include/linux/pm.h:342:21: note: in definition of macro 'SET_RUNTIME_PM_OPS'
  342 |  .runtime_suspend = suspend_fn, \
      |                     ^~~~~~~~~~
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:769:45:
 error: 'stmmac_runtime_resume' undeclared here (not in a function)
  769 |  SET_RUNTIME_PM_OPS(stmmac_runtime_suspend, stmmac_runtime_resume, NULL)
      |                                             ^~~~~~~~~~~~~~~~~~~~~
./include/linux/pm.h:343:20: note: in definition of macro 'SET_RUNTIME_PM_OPS'
  343 |  .runtime_resume = resume_fn, \
      |                    ^~~~~~~~~

Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: add clocks management for gmac driver

commit 5ec55823438e850c91c6b92aec93fb04ebde29e2 upstream.

This patch intends to add clocks management for stmmac driver:

If CONFIG_PM enabled:
1. Keep clocks disabled after driver probed.
2. Enable clocks when up the net device, and disable clocks when down
the net device.

If CONFIG_PM disabled:
Keep clocks always enabled after driver probed.

Note:
1. It is fine for ethtool, since the way of implementing ethtool_ops::begin
in stmmac is only can be accessed when interface is enabled, so the clocks
are ticked.
2. The MDIO bus has a different life cycle to the MAC, need ensure
clocks are enabled when _mdio_read/write() need clocks, because these
functions can be called while the interface it not opened.

Stable backport notes:
When run below command to remove ethernet driver on
stratix10 platform, there will be warning trace as below:

$ cd /sys/class/net/eth0/device/driver/
$ echo ff800000.ethernet > unbind

WARNING: CPU: 3 PID: 386 at drivers/clk/clk.c:810 clk_core_unprepare+0x114/0x274
Modules linked in: sch_fq_codel
CPU: 3 PID: 386 Comm: sh Tainted: G        W         5.10.74-yocto-standard #1
Hardware name: SoCFPGA Stratix 10 SoCDK (DT)
pstate: 00000005 (nzcv daif -PAN -UAO -TCO BTYPE=--)
pc : clk_core_unprepare+0x114/0x274
lr : clk_core_unprepare+0x114/0x274
sp : ffff800011bdbb10
clk_core_unprepare+0x114/0x274
 clk_unprepare+0x38/0x50
 stmmac_remove_config_dt+0x40/0x80
 stmmac_pltfr_remove+0x64/0x80
 platform_drv_remove+0x38/0x60
 ... ..
 el0_sync_handler+0x1a4/0x1b0
 el0_sync+0x180/0x1c0
This issue is introduced by introducing upstream commit 8f269102baf7
("net: stmmac: disable clocks in stmmac_remove_config_dt()")

But in latest mainline kernel, there is no this issue. Because this
patch improved clocks management for stmmac driver.
Therefore, backport it and its fixing patches to stable kernel v5.10.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bootconfig: init: Fix memblock leak in xbc_make_cmdline()

commit 1ae43851b18afe861120ebd7c426dc44f06bb2bd upstream.

Free unused memblock in a error case to fix memblock leak
in xbc_make_cmdline().

Link: https://lkml.kernel.org/r/163177339181.682366.8713781325929549256.stgit@devnote2
Fixes: 51887d03aca1 ("bootconfig: init: Allow admin to use bootconfig for kernel command line")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: Use blk_validate_block_size() to validate block size

commit af3c570fb0df422b4906ebd11c1bf363d89961d5 upstream.

Remove loop_validate_block_size() and use the block layer helper
to validate block size.

Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20211026144015.188-4-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: Add a helper to validate the block size

commit 570b1cac477643cbf01a45fa5d018430a1fddbce upstream.

There are some duplicated codes to validate the block
size in block drivers. This limitation actually comes
from block layer, so this patch tries to add a new block
layer helper for that.

Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20211026144015.188-2-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fortify: Explicitly disable Clang support

commit a52f8a59aef46b59753e583bf4b28fccb069ce64 upstream.

Clang has never correctly compiled the FORTIFY_SOURCE defenses due to
a couple bugs:

Eliding inlines with matching __builtin_* names
https://bugs.llvm.org/show_bug.cgi?id=50322

Incorrect __builtin_constant_p() of some globals
https://bugs.llvm.org/show_bug.cgi?id=41459

In the process of making improvements to the FORTIFY_SOURCE defenses, the
first (silent) bug (coincidentally) becomes worked around, but exposes
the latter which breaks the build. As such, Clang must not be used with
CONFIG_FORTIFY_SOURCE until at least latter bug is fixed (in Clang 13),
and the fortify routines have been rearranged.

Update the Kconfig to reflect the reality of the current situation.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/lkml/CAKwvOd=A+ueGV2ihdy5GtgR2fQbcXjjAtVxv3=cPjffpebZB7A@mail.gmail.com
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.80

Link: https://lore.kernel.org/r/20211115165343.579890274@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Link: https://lore.kernel.org/r/20211116142545.607076484@linuxfoundation.org
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/r/20211117101457.890809587@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Link: https://lore.kernel.org/r/20211117144602.341592498@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc/tegra: pmc: Fix imbalanced clock disabling in error code path

commit 19221e3083020bd9537624caa0ee0145ed92ba36 upstream.

The tegra_powergate_power_up() has a typo in the error code path where it
will try to disable clocks twice, fix it. In practice that error never
happens, so this is a minor correction.

Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/sev: Make the #VC exception stacks part of the default stacks storage

commit 541ac97186d9ea88491961a46284de3603c914fd upstream.

The size of the exception stacks was increased by the commit in Fixes,
resulting in stack sizes greater than a page in size. The #VC exception
handling was only mapping the first (bottom) page, resulting in an
SEV-ES guest failing to boot.

Make the #VC exception stacks part of the default exception stacks
storage and allocate them with a CONFIG_AMD_MEM_ENCRYPT=y .config. Map
them only when a SEV-ES guest has been detected.

Rip out the custom VC stacks mapping and storage code.

 [ bp: Steal and adapt Tom's commit message. ]

Fixes: 7fae4c24a2b8 ("x86: Increase exception stack sizes")
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Link: https://lkml.kernel.org/r/YVt1IMjIs7pIZTRR@zn.tnic
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/sev: Add an x86 version of cc_platform_has()

commit aa5a461171f98fde0df78c4f6b5018a1e967cf81 upstream.

Introduce an x86 version of the cc_platform_has() function. This will be
used to replace vendor specific calls like sme_active(), sev_active(),
etc.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210928191009.32551-4-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/cc: Introduce a function to check for confidential computing features

commit 46b49b12f3fc5e1347dba37d4639e2165f447871 upstream.

In preparation for other confidential computing technologies, introduce
a generic helper function, cc_platform_has(), that can be used to
check for specific active confidential computing attributes, like
memory encryption. This is intended to eliminate having to add multiple
technology-specific checks to the code (e.g. if (sev_active() ||
tdx_active() || ... ).

 [ bp: s/_CC_PLATFORM_H/_LINUX_CC_PLATFORM_H/g ]

Co-developed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210928191009.32551-3-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: Fix also no-alu32 strobemeta selftest

commit a20eac0af02810669e187cb623bc904908c423af upstream.

Previous fix aded bpf_clamp_umax() helper use to re-validate boundaries.
While that works correctly, it introduces more branches, which blows up
past 1 million instructions in no-alu32 variant of strobemeta selftests.

Switching len variable from u32 to u64 also fixes the issue and reduces
the number of validated instructions, so use that instead. Fix this
patch and bpf_clamp_umax() removed, both alu32 and no-alu32 selftests
pass.

Fixes: 0133c20480b1 ("selftests/bpf: Fix strobemeta selftest regression")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211101230118.1273019-1-andrii@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: moxart: Fix null pointer dereference on pointer host

commit 0eab756f8821d255016c63bb55804c429ff4bdb1 upstream.

There are several error return paths that dereference the null pointer
host because the pointer has not yet been set to a valid value.
Fix this by adding a new out_mmc label and exiting via this label
to avoid the host clean up and hence the null pointer dereference.

Addresses-Coverity: ("Explicit null dereference")
Fixes: 8105c2abbf36 ("mmc: moxart: Fix reference count leaks in moxart_probe")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20211013100052.125461-1-colin.king@canonical.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath10k: fix invalid dma_addr_t token assignment

commit 937e79c67740d1d84736730d679f3cb2552f990e upstream.

Using a kernel pointer in place of a dma_addr_t token can
lead to undefined behavior if that makes it into cache
management functions. The compiler caught one such attempt
in a cast:

drivers/net/wireless/ath/ath10k/mac.c: In function 'ath10k_add_interface':
drivers/net/wireless/ath/ath10k/mac.c:5586:47: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
 5586 |                         arvif->beacon_paddr = (dma_addr_t)arvif->beacon_buf;
      |                                               ^

Looking through how this gets used down the way, I'm fairly
sure that beacon_paddr is never accessed again for ATH10K_DEV_TYPE_HL
devices, and if it was accessed, that would be a bug.

Change the assignment to use a known-invalid address token
instead, which avoids the warning and makes it easier to catch
bugs if it does end up getting used.

Fixes: e263bdab9c0e ("ath10k: high latency fixes for beacon buffer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211014075153.3655910-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SUNRPC: Partial revert of commit 6f9f17287e78

commit ea7a1019d8baf8503ecd6e3ec8436dec283569e6 upstream.

The premise of commit 6f9f17287e78 ("SUNRPC: Mitigate cond_resched() in
xprt_transmit()") was that cond_resched() is expensive and unnecessary
when there has been just a single send.
The point of cond_resched() is to ensure that tasks that should pre-empt
this one get a chance to do so when it is safe to do so. The code prior
to commit 6f9f17287e78 failed to take into account that it was keeping a
rpc_task pinned for longer than it needed to, and so rather than doing a
full revert, let's just move the cond_resched.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: aardvark: Fix PCIe Max Payload Size setting

commit a4e17d65dafdd3513042d8f00404c9b6068a825c upstream.

Change PCIe Max Payload Size setting in PCIe Device Control register to 512
bytes to align with PCIe Link Initialization sequence as defined in Marvell
Armada 3700 Functional Specification. According to the specification,
maximal Max Payload Size supported by this device is 512 bytes.

Without this kernel prints suspicious line:

    pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 16384, max 512)

With this change it changes to:

    pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 512, max 512)

Link: https://lore.kernel.org/r/20211005180952.6812-3-kabel@kernel.org
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add PCI_EXP_DEVCTL_PAYLOAD_* macros

commit 460275f124fb072dca218a6b43b6370eebbab20d upstream.

Define a macro PCI_EXP_DEVCTL_PAYLOAD_* for every possible Max Payload
Size in linux/pci_regs.h, in the same style as PCI_EXP_DEVCTL_READRQ_*.

Link: https://lore.kernel.org/r/20211005180952.6812-2-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/sun4i: Fix macros in sun8i_csc.h

commit c302c98da646409d657a473da202f10f417f3ff1 upstream.

Macros SUN8I_CSC_CTRL() and SUN8I_CSC_COEFF() don't follow usual
recommendation of having arguments enclosed in parenthesis. While that
didn't change anything for quite sometime, it actually become important
after CSC code rework with commit ea067aee45a8 ("drm/sun4i: de2/de3:
Remove redundant CSC matrices").

Without this fix, colours are completely off for supported YVU formats
on SoCs with DE2 (A64, H3, R40, etc.).

Fix the issue by enclosing macro arguments in parenthesis.

Cc: stable@vger.kernel.org # 5.12+
Fixes: 883029390550 ("drm/sun4i: Add DE2 CSC library")
Reported-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831184819.93670-1-jernej.skrabec@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/85xx: fix timebase sync issue when CONFIG_HOTPLUG_CPU=n

commit c45361abb9185b1e172bd75eff51ad5f601ccae4 upstream.

When CONFIG_SMP=y, timebase synchronization is required when the second
kernel is started.

arch/powerpc/kernel/smp.c:
  int __cpu_up(unsigned int cpu, struct task_struct *tidle)
  {
   ...
   if (smp_ops->give_timebase)
   smp_ops->give_timebase();
   ...
  }

  void start_secondary(void *unused)
  {
   ...
   if (smp_ops->take_timebase)
   smp_ops->take_timebase();
   ...
  }

When CONFIG_HOTPLUG_CPU=n and CONFIG_KEXEC_CORE=n,
 smp_85xx_ops.give_timebase is NULL,
 smp_85xx_ops.take_timebase is NULL,
As a result, the timebase is not synchronized.

Timebase  synchronization does not depend on CONFIG_HOTPLUG_CPU.

Fixes: 56f1ba280719 ("powerpc/mpc85xx: refactor the PM operations")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210929033646.39630-3-nixiaoming@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv/prd: Unregister OPAL_MSG_PRD2 notifier during module unload

commit 52862ab33c5d97490f3fa345d6529829e6d6637b upstream.

Commit 587164cd, introduced new opal message type (OPAL_MSG_PRD2) and
added opal notifier. But I missed to unregister the notifier during
module unload path. This results in below call trace if you try to
unload and load opal_prd module.

Also add new notifier_block for OPAL_MSG_PRD2 message.

Sample calltrace (modprobe -r opal_prd; modprobe opal_prd)
  BUG: Unable to handle kernel data access on read at 0xc0080000192200e0
  Faulting instruction address: 0xc00000000018d1cc
  Oops: Kernel access of bad area, sig: 11 [#1]
  LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
  CPU: 66 PID: 7446 Comm: modprobe Kdump: loaded Tainted: G            E     5.14.0prd #759
  NIP:  c00000000018d1cc LR: c00000000018d2a8 CTR: c0000000000cde10
  REGS: c0000003c4c0f0a0 TRAP: 0300   Tainted: G            E      (5.14.0prd)
  MSR:  9000000002009033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE>  CR: 24224824  XER: 20040000
  CFAR: c00000000018d2a4 DAR: c0080000192200e0 DSISR: 40000000 IRQMASK: 1
  ...
  NIP notifier_chain_register+0x2c/0xc0
  LR  atomic_notifier_chain_register+0x48/0x80
  Call Trace:
    0xc000000002090610 (unreliable)
    atomic_notifier_chain_register+0x58/0x80
    opal_message_notifier_register+0x7c/0x1e0
    opal_prd_probe+0x84/0x150 [opal_prd]
    platform_probe+0x78/0x130
    really_probe+0x110/0x5d0
    __driver_probe_device+0x17c/0x230
    driver_probe_device+0x60/0x130
    __driver_attach+0xfc/0x220
    bus_for_each_dev+0xa8/0x130
    driver_attach+0x34/0x50
    bus_add_driver+0x1b0/0x300
    driver_register+0x98/0x1a0
    __platform_driver_register+0x38/0x50
    opal_prd_driver_init+0x34/0x50 [opal_prd]
    do_one_initcall+0x60/0x2d0
    do_init_module+0x7c/0x320
    load_module+0x3394/0x3650
    __do_sys_finit_module+0xd4/0x160
    system_call_exception+0x140/0x290
    system_call_common+0xf4/0x258

Fixes: 587164cd593c ("powerpc/powernv: Add new opal message type")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211028165716.41300-1-hegdevasant@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: au1550nd: Keep the driver compatible with on-die ECC engines

commit 7e3cdba176ba59eaf4d463d273da0718e3626140 upstream.

Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.

It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.

There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)

As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.

Fixes: dbffc8ccdf3a ("mtd: rawnand: au1550: Move the ECC initialization to ->attach_chip()")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-3-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: plat_nand: Keep the driver compatible with on-die ECC engines

commit 325fd539fc84f0aaa0ceb9d7d3b8718582473dc5 upstream.

Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.

It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.

There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)

As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.

Fixes: 612e048e6aab ("mtd: rawnand: plat_nand: Move the ECC initialization to ->attach_chip()")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-8-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: orion: Keep the driver compatible with on-die ECC engines

commit 194ac63de6ff56d30c48e3ac19c8a412f9c1408e upstream.

Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.

It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.

There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)

As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.

Fixes: 553508cec2e8 ("mtd: rawnand: orion: Move the ECC initialization to ->attach_chip()")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-6-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: pasemi: Keep the driver compatible with on-die ECC engines

commit f16b7d2a5e810fcf4b15d096246d0d445da9cc88 upstream.

Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.

It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.

There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)

As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.

Fixes: 8fc6f1f042b2 ("mtd: rawnand: pasemi: Move the ECC initialization to ->attach_chip()")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-7-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: gpio: Keep the driver compatible with on-die ECC engines

commit b5b5b4dc6fcd8194b9dd38c8acdc5ab71adf44f8 upstream.

Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.

It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.

There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)

As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.

Fixes: f6341f6448e0 ("mtd: rawnand: gpio: Move the ECC initialization to ->attach_chip()")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-4-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: mpc5121: Keep the driver compatible with on-die ECC engines

commit f9d8570b7fd6f4f08528ce2f5e39787a8a260cd6 upstream.

Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.

It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.

There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)

As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.

Fixes: 6dd09f775b72 ("mtd: rawnand: mpc5121: Move the ECC initialization to ->attach_chip()")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-5-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: xway: Keep the driver compatible with on-die ECC engines

commit 6bcd2960af1b7bacb2f1e710ab0c0b802d900501 upstream.

Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.

It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.

There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)

As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.

Fixes: d525914b5bd8 ("mtd: rawnand: xway: Move the ECC initialization to ->attach_chip()")
Cc: stable@vger.kernel.org
Cc: Jan Hoffmann <jan@3e8.eu>
Cc: Kestrel seventyfour <kestrelseventyfour@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Jan Hoffmann <jan@3e8.eu>
Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-10-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: ams-delta: Keep the driver compatible with on-die ECC engines

commit d707bb74daae07879e0fc1b4b960f8f2d0a5fe5d upstream.

Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.

It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.

There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)

As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.

Fixes: 59d93473323a ("mtd: rawnand: ams-delta: Move the ECC initialization to ->attach_chip()")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-2-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/cio: make ccw_device_dma_* more robust

commit ad9a14517263a16af040598c7920c09ca9670a31 upstream.

Since commit 48720ba56891 ("virtio/s390: use DMA memory for ccw I/O and
classic notifiers") we were supposed to make sure that
virtio_ccw_release_dev() completes before the ccw device and the
attached dma pool are torn down, but unfortunately we did not.  Before
that commit it used to be OK to delay cleaning up the memory allocated
by virtio-ccw indefinitely (which isn't really intuitive for guys used
to destruction happens in reverse construction order), but now we
trigger a BUG_ON if the genpool is destroyed before all memory allocated
from it is deallocated. Which brings down the guest. We can observe this
problem, when unregister_virtio_device() does not give up the last
reference to the virtio_device (e.g. because a virtio-scsi attached scsi
disk got removed without previously unmounting its previously mounted
partition).

To make sure that the genpool is only destroyed after all the necessary
freeing is done let us take a reference on the ccw device on each
ccw_device_dma_zalloc() and give it up on each ccw_device_dma_free().

Actually there are multiple approaches to fixing the problem at hand
that can work. The upside of this one is that it is the safest one while
remaining simple. We don't crash the guest even if the driver does not
pair allocations and frees. The downside is the reference counting
overhead, that the reference counting for ccw devices becomes more
complex, in a sense that we need to pair the calls to the aforementioned
functions for it to be correct, and that if we happen to leak, we leak
more than necessary (the whole ccw device instead of just the genpool).

Some alternatives to this approach are taking a reference in
virtio_ccw_online() and giving it up in virtio_ccw_release_dev() or
making sure virtio_ccw_release_dev() completes its work before
virtio_ccw_remove() returns. The downside of these approaches is that
these are less safe against programming errors.

Cc: <stable@vger.kernel.org> # v5.3
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: 48720ba56891 ("virtio/s390: use DMA memory for ccw I/O and classic notifiers")
Reported-by: bfu@redhat.com
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/ap: Fix hanging ioctl caused by orphaned replies

commit 3826350e6dd435e244eb6e47abad5a47c169ebc2 upstream.

When a queue is switched to soft offline during heavy load and later
switched to soft online again and now used, it may be that the caller
is blocked forever in the ioctl call.

The failure occurs because there is a pending reply after the queue(s)
have been switched to offline. This orphaned reply is received when
the queue is switched to online and is accidentally counted for the
outstanding replies. So when there was a valid outstanding reply and
this orphaned reply is received it counts as the outstanding one thus
dropping the outstanding counter to 0. Voila, with this counter the
receive function is not called any more and the real outstanding reply
is never received (until another request comes in...) and the ioctl
blocks.

The fix is simple. However, instead of readjusting the counter when an
orphaned reply is detected, I check the queue status for not empty and
compare this to the outstanding counter. So if the queue is not empty
then the counter must not drop to 0 but at least have a value of 1.

Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/tape: fix timer initialization in tape_std_assign()

commit 213fca9e23b59581c573d558aa477556f00b8198 upstream.

commit 9c6c273aa424 ("timer: Remove init_timer_on_stack() in favor
of timer_setup_on_stack()") changed the timer setup from
init_timer_on_stack(() to timer_setup(), but missed to change the
mod_timer() call. And while at it, use msecs_to_jiffies() instead
of the open coded timeout calculation.

Cc: stable@vger.kernel.org
Fixes: 9c6c273aa424 ("timer: Remove init_timer_on_stack() in favor of timer_setup_on_stack()")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/cio: check the subchannel validity for dev_busid

commit a4751f157c194431fae9e9c493f456df8272b871 upstream.

Check the validity of subchanel before reading other fields in
the schib.

Fixes: d3683c055212 ("s390/cio: add dev_busid sysfs entry for each subchannel")
CC: <stable@vger.kernel.org>
Reported-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20211105154451.847288-1-vneethv@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

video: backlight: Drop maximum brightness override for brightness zero

commit 33a5471f8da976bf271a1ebbd6b9d163cb0cb6aa upstream.

The note in c2adda27d202f ("video: backlight: Add of_find_backlight helper
in backlight.c") says that gpio-backlight uses brightness as power state.
This has been fixed since in ec665b756e6f7 ("backlight: gpio-backlight:
Correct initial power state handling") and other backlight drivers do not
require this workaround. Drop the workaround.

This fixes the case where e.g. pwm-backlight can perfectly well be set to
brightness 0 on boot in DT, which without this patch leads to the display
brightness to be max instead of off.

Fixes: c2adda27d202f ("video: backlight: Add of_find_backlight helper in backlight.c")
Cc: <stable@vger.kernel.org> # 5.4+
Cc: <stable@vger.kernel.org> # 4.19.x: ec665b756e6f7: backlight: gpio-backlight: Correct initial power state handling
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: dln2: Add cell for initializing DLN2 ADC

commit 313c84b5ae4104e48c661d5d706f9f4c425fd50f upstream.

This patch extends the DLN2 driver; adding cell for adc_dln2 module.

The original patch[1] fell through the cracks when the driver was added
so ADC has never actually been usable. That patch did not have ACPI
support which was added in v5.9, so the oldest supported version this
current patch can be backported to is 5.10.

[1] https://www.spinics.net/lists/linux-iio/msg33975.html

Cc: <stable@vger.kernel.org> # 5.10+
Signed-off-by: Jack Andersen <jackoalan@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211018112541.25466-1-noralf@tronnes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, oom: do not trigger out_of_memory from the #PF

commit 60e2793d440a3ec95abb5d6d4fc034a4b480472d upstream.

Any allocation failure during the #PF path will return with VM_FAULT_OOM
which in turn results in pagefault_out_of_memory.  This can happen for 2
different reasons.  a) Memcg is out of memory and we rely on
mem_cgroup_oom_synchronize to perform the memcg OOM handling or b)
normal allocation fails.

The latter is quite problematic because allocation paths already trigger
out_of_memory and the page allocator tries really hard to not fail
allocations.  Anyway, if the OOM killer has been already invoked there
is no reason to invoke it again from the #PF path.  Especially when the
OOM condition might be gone by that time and we have no way to find out
other than allocate.

Moreover if the allocation failed and the OOM killer hasn't been invoked
then we are unlikely to do the right thing from the #PF context because
we have already lost the allocation context and restictions and
therefore might oom kill a task from a different NUMA domain.

This all suggests that there is no legitimate reason to trigger
out_of_memory from pagefault_out_of_memory so drop it.  Just to be sure
that no #PF path returns with VM_FAULT_OOM without allocation print a
warning that this is happening before we restart the #PF.

[VvS: #PF allocation can hit into limit of cgroup v1 kmem controller.
This is a local problem related to memcg, however, it causes unnecessary
global OOM kills that are repeated over and over again and escalate into a
real disaster.  This has been broken since kmem accounting has been
introduced for cgroup v1 (3.8).  There was no kmem specific reclaim for
the separate limit so the only way to handle kmem hard limit was to return
with ENOMEM.  In upstream the problem will be fixed by removing the
outdated kmem limit, however stable and LTS kernels cannot do it and are
still affected.  This patch fixes the problem and should be backported
into stable/LTS.]

Link: https://lkml.kernel.org/r/f5fd8dd8-0ad4-c524-5f65-920b01972a42@virtuozzo.com
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, oom: pagefault_out_of_memory: don't force global OOM for dying tasks

commit 0b28179a6138a5edd9d82ad2687c05b3773c387b upstream.

Patch series "memcg: prohibit unconditional exceeding the limit of dying tasks", v3.

Memory cgroup charging allows killed or exiting tasks to exceed the hard
limit.  It can be misused and allowed to trigger global OOM from inside
a memcg-limited container.  On the other hand if memcg fails allocation,
called from inside #PF handler it triggers global OOM from inside
pagefault_out_of_memory().

To prevent these problems this patchset:
 (a) removes execution of out_of_memory() from
     pagefault_out_of_memory(), becasue nobody can explain why it is
     necessary.
 (b) allow memcg to fail allocation of dying/killed tasks.

This patch (of 3):

Any allocation failure during the #PF path will return with VM_FAULT_OOM
which in turn results in pagefault_out_of_memory which in turn executes
out_out_memory() and can kill a random task.

An allocation might fail when the current task is the oom victim and
there are no memory reserves left.  The OOM killer is already handled at
the page allocator level for the global OOM and at the charging level
for the memcg one.  Both have much more information about the scope of
allocation/charge request.  This means that either the OOM killer has
been invoked properly and didn't lead to the allocation success or it
has been skipped because it couldn't have been invoked.  In both cases
triggering it from here is pointless and even harmful.

It makes much more sense to let the killed task die rather than to wake
up an eternally hungry oom-killer and send him to choose a fatter victim
for breakfast.

Link: https://lkml.kernel.org/r/0828a149-786e-7c06-b70a-52d086818ea3@virtuozzo.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/bpf: Emit stf barrier instruction sequences for BPF_NOSPEC

upstream commit b7540d62509453263604a155bf2d5f0ed450cba2

Emit similar instruction sequences to commit a048a07d7f4535
("powerpc/64s: Add support for a store forwarding barrier at kernel
entry/exit") when encountering BPF_NOSPEC.

Mitigations are enabled depending on what the firmware advertises. In
particular, we do not gate these mitigations based on current settings,
just like in x86. Due to this, we don't need to take any action if
mitigations are enabled or disabled at runtime.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/956570cbc191cd41f8274bed48ee757a86dac62a.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
[adjust macros to account for commits 1c9debbc2eb539 and ef909ba954145e.
adjust security feature checks to account for commit 84ed26fd00c514]
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/security: Add a helper to query stf_barrier type

upstream commit 030905920f32e91a52794937f67434ac0b3ea41a

Add a helper to return the stf_barrier type for the current processor.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3bd5d7f96ea1547991ac2ce3137dc2b220bae285.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/bpf: Validate branch ranges

upstream commit 3832ba4e283d7052b783dab8311df7e3590fed93

Add checks to ensure that we never emit branch instructions with
truncated branch offsets.

Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/71d33a6b7603ec1013c9734dd8bdd4ff5e929142.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
[drop ppc32 changes]
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/lib: Add helper to check if offset is within conditional branch range

upstream commit 4549c3ea3160fa8b3f37dfe2f957657bb265eda9

Add a helper to check if a given offset is within the branch range for a
powerpc conditional branch instruction, and update some sites to use the
new helper.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/442b69a34ced32ca346a0d9a855f3f6cfdbbbd41.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memcg: prohibit unconditional exceeding the limit of dying tasks

commit a4ebf1b6ca1e011289677239a2a361fde4a88076 upstream.

Memory cgroup charging allows killed or exiting tasks to exceed the hard
limit.  It is assumed that the amount of the memory charged by those
tasks is bound and most of the memory will get released while the task
is exiting.  This is resembling a heuristic for the global OOM situation
when tasks get access to memory reserves.  There is no global memory
shortage at the memcg level so the memcg heuristic is more relieved.

The above assumption is overly optimistic though.  E.g.  vmalloc can
scale to really large requests and the heuristic would allow that.  We
used to have an early break in the vmalloc allocator for killed tasks
but this has been reverted by commit b8c8a338f75e ("Revert "vmalloc:
back off when the current task is killed"").  There are likely other
similar code paths which do not check for fatal signals in an
allocation&charge loop.  Also there are some kernel objects charged to a
memcg which are not bound to a process life time.

It has been observed that it is not really hard to trigger these
bypasses and cause global OOM situation.

One potential way to address these runaways would be to limit the amount
of excess (similar to the global OOM with limited oom reserves).  This
is certainly possible but it is not really clear how much of an excess
is desirable and still protects from global OOMs as that would have to
consider the overall memcg configuration.

This patch is addressing the problem by removing the heuristic
altogether.  Bypass is only allowed for requests which either cannot
fail or where the failure is not desirable while excess should be still
limited (e.g.  atomic requests).  Implementation wise a killed or dying
task fails to charge if it has passed the OOM killer stage.  That should
give all forms of reclaim chance to restore the limit before the failure
(ENOMEM) and tell the caller to back off.

In addition, this patch renames should_force_charge() helper to
task_is_dying() because now its use is not associated witch forced
charging.

This patch depends on pagefault_out_of_memory() to not trigger
out_of_memory(), because then a memcg failure can unwind to VM_FAULT_OOM
and cause a global OOM killer.

Link: https://lkml.kernel.org/r/8f5cebbb-06da-4902-91f0-6566fc4b4203@virtuozzo.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9p/net: fix missing error check in p9_check_errors

commit 27eb4c3144f7a5ebef3c9a261d80cb3e1fa784dc upstream.

Link: https://lkml.kernel.org/r/99338965-d36c-886e-cd0e-1d8fff2b4746@gmail.com
Reported-by: syzbot+06472778c97ed94af66d@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net, neigh: Enable state migration between NUD_PERMANENT and NTF_USE

[ Upstream commit 3dc20f4762c62d3b3f0940644881ed818aa7b2f5 ]

Currently, it is not possible to migrate a neighbor entry between NUD_PERMANENT
state and NTF_USE flag with a dynamic NUD state from a user space control plane.
Similarly, it is not possible to add/remove NTF_EXT_LEARNED flag from an existing
neighbor entry in combination with NTF_USE flag.

This is due to the latter directly calling into neigh_event_send() without any
meta data updates as happening in __neigh_update(). Thus, to enable this use
case, extend the latter with a NEIGH_UPDATE_F_USE flag where we break the
NUD_PERMANENT state in particular so that a latter neigh_event_send() is able
to re-resolve a neighbor entry.

Before fix, NUD_PERMANENT -> NUD_* & NTF_USE:

  # ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
  [...]
  # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
  [...]

As can be seen, despite the admin-triggered replace, the entry remains in the
NUD_PERMANENT state.

After fix, NUD_PERMANENT -> NUD_* & NTF_USE:

  # ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
  [...]
  # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE
  [...]
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn STALE
  [...]
  # ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT
  [...]

After the fix, the admin-triggered replace switches to a dynamic state from
the NTF_USE flag which triggered a new neighbor resolution. Likewise, we can
transition back from there, if needed, into NUD_PERMANENT.

Similar before/after behavior can be observed for below transitions:

Before fix, NTF_USE -> NTF_USE | NTF_EXT_LEARNED -> NTF_USE:

  # ./ip/ip n replace 192.168.178.30 dev enp5s0 use
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
  [...]
  # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
  [...]

After fix, NTF_USE -> NTF_USE | NTF_EXT_LEARNED -> NTF_USE:

  # ./ip/ip n replace 192.168.178.30 dev enp5s0 use
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
  [...]
  # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE
  [...]
  # ./ip/ip n replace 192.168.178.30 dev enp5s0 use
  # ./ip/ip n
  192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
  [..]

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: should use GFP_NOFS for directory inodes

commit 92d602bc7177325e7453189a22e0c8764ed3453e upstream.

We use inline_dentry which requires to allocate dentry page when adding a link.
If we allow to reclaim memory from filesystem, we do down_read(&sbi->cp_rwsem)
twice by f2fs_lock_op(). I think this should be okay, but how about stopping
the lockdep complaint [1]?

f2fs_create()
 - f2fs_lock_op()
 - f2fs_do_add_link()
  - __f2fs_find_entry
   - f2fs_get_read_data_page()
   -> kswapd
    - shrink_node
     - f2fs_evict_inode
      - f2fs_lock_op()

[1]

fs_reclaim
){+.+.}-{0:0}
:
kswapd0:        lock_acquire+0x114/0x394
kswapd0:        __fs_reclaim_acquire+0x40/0x50
kswapd0:        prepare_alloc_pages+0x94/0x1ec
kswapd0:        __alloc_pages_nodemask+0x78/0x1b0
kswapd0:        pagecache_get_page+0x2e0/0x57c
kswapd0:        f2fs_get_read_data_page+0xc0/0x394
kswapd0:        f2fs_find_data_page+0xa4/0x23c
kswapd0:        find_in_level+0x1a8/0x36c
kswapd0:        __f2fs_find_entry+0x70/0x100
kswapd0:        f2fs_do_add_link+0x84/0x1ec
kswapd0:        f2fs_mkdir+0xe4/0x1e4
kswapd0:        vfs_mkdir+0x110/0x1c0
kswapd0:        do_mkdirat+0xa4/0x160
kswapd0:        __arm64_sys_mkdirat+0x24/0x34
kswapd0:        el0_svc_common.llvm.17258447499513131576+0xc4/0x1e8
kswapd0:        do_el0_svc+0x28/0xa0
kswapd0:        el0_svc+0x24/0x38
kswapd0:        el0_sync_handler+0x88/0xec
kswapd0:        el0_sync+0x1c0/0x200
kswapd0:
-> #1
(
&sbi->cp_rwsem
){++++}-{3:3}
:
kswapd0:        lock_acquire+0x114/0x394
kswapd0:        down_read+0x7c/0x98
kswapd0:        f2fs_do_truncate_blocks+0x78/0x3dc
kswapd0:        f2fs_truncate+0xc8/0x128
kswapd0:        f2fs_evict_inode+0x2b8/0x8b8
kswapd0:        evict+0xd4/0x2f8
kswapd0:        iput+0x1c0/0x258
kswapd0:        do_unlinkat+0x170/0x2a0
kswapd0:        __arm64_sys_unlinkat+0x4c/0x68
kswapd0:        el0_svc_common.llvm.17258447499513131576+0xc4/0x1e8
kswapd0:        do_el0_svc+0x28/0xa0
kswapd0:        el0_svc+0x24/0x38
kswapd0:        el0_sync_handler+0x88/0xec
kswapd0:        el0_sync+0x1c0/0x200

Cc: stable@vger.kernel.org
Fixes: bdbc90fa55af ("f2fs: don't put dentry page in pagecache into highmem")
Reviewed-by: Chao Yu <chao@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Light Hsieh <light.hsieh@mediatek.com>
Tested-by: Light Hsieh <light.hsieh@mediatek.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/sifive-plic: Fixup EOI failed when masked

commit 69ea463021be0d159ab30f96195fb0dd18ee2272 upstream.

When using "devm_request_threaded_irq(,,,,IRQF_ONESHOT,,)" in a driver,
only the first interrupt is handled, and following interrupts are never
delivered (initially reported in [1]).

That's because the RISC-V PLIC cannot EOI masked interrupts, as explained
in the description of Interrupt Completion in the PLIC spec [2]:

<quote>
The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the claim/complete
register. The PLIC does not check whether the completion ID is the same
as the last claim ID for that target. If the completion ID does not match
an interrupt source that *is currently enabled* for the target, the
completion is silently ignored.
</quote>

Re-enable the interrupt before completion if it has been masked during
the handling, and remask it afterwards.

[1] http://lists.infradead.org/pipermail/linux-riscv/2021-July/007441.html
[2] https://github.com/riscv/riscv-plic-spec/blob/8bc15a35d07c9edf7b5d23fec9728302595ffc4d/riscv-plic.adoc

Fixes: bb0fed1c60cc ("irqchip/sifive-plic: Switch to fasteoi flow")
Reported-by: Vincent Pelletier <plr.vincent@gmail.com>
Tested-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[maz: amended commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211105094748.3894453-1-guoren@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()

commit ca7752caeaa70bd31d1714af566c9809688544af upstream.

copy_process currently copies task_struct.posix_cputimers_work as-is. If a
timer interrupt arrives while handling clone and before dup_task_struct
completes then the child task will have:

1. posix_cputimers_work.scheduled = true
2. posix_cputimers_work.work queued.

copy_process clears task_struct.task_works, so (2) will have no effect and
posix_cpu_timers_work will never run (not to mention it doesn't make sense
for two tasks to share a common linked list).

Since posix_cpu_timers_work never runs, posix_cputimers_work.scheduled is
never cleared. Since scheduled is set, future timer interrupts will skip
scheduling work, with the ultimate result that the task will never receive
timer expirations.

Together, the complete flow is:

1. Task 1 calls clone(), enters kernel.
2. Timer interrupt fires, schedules task work on Task 1.
   2a. task_struct.posix_cputimers_work.scheduled = true
   2b. task_struct.posix_cputimers_work.work added to
       task_struct.task_works.
3. dup_task_struct() copies Task 1 to Task 2.
4. copy_process() clears task_struct.task_works for Task 2.
5. Future timer interrupts on Task 2 see
   task_struct.posix_cputimers_work.scheduled = true and skip scheduling
   work.

Fix this by explicitly clearing contents of task_struct.posix_cputimers_work
in copy_process(). This was never meant to be shared or inherited across
tasks in the first place.

Fixes: 1fb497dd0030 ("posix-cpu-timers: Provide mechanisms to defer timer handling to task_work")
Reported-by: Rhys Hiltner <rhys@justin.tv>
Signed-off-by: Michael Pratt <mpratt@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211101210615.716522-1-mpratt@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mce: Add errata workaround for Skylake SKX37

commit e629fc1407a63dbb748f828f9814463ffc2a0af0 upstream.

Errata SKX37 is word-for-word identical to the other errata listed in
this workaround.   I happened to notice this after investigating a CMCI
storm on a Skylake host.  While I can't confirm this was the root cause,
spurious corrected errors does sound like a likely suspect.

Fixes: 2976908e4198 ("x86/mce: Do not log spurious corrected mce errors")
Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20211029205759.GA7385@codemonkey.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Fix assembly error from MIPSr2 code used within MIPS_ISA_ARCH_LEVEL

commit a923a2676e60683aee46aa4b93c30aff240ac20d upstream.

Fix assembly errors like:

{standard input}: Assembler messages:
{standard input}:287: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32'
{standard input}:680: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32'
{standard input}:1274: Error: opcode not supported on this processor: mips3 (mips3) `dins $12,$9,32,32'
{standard input}:2175: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32'
make[1]: *** [scripts/Makefile.build:277: mm/highmem.o] Error 1

with code produced from `__cmpxchg64' for MIPS64r2 CPU configurations
using CONFIG_32BIT and CONFIG_PHYS_ADDR_T_64BIT.

This is due to MIPS_ISA_ARCH_LEVEL downgrading the assembly architecture
to `r4000' i.e. MIPS III for MIPS64r2 configurations, while there is a
block of code containing a DINS MIPS64r2 instruction conditionalized on
MIPS_ISA_REV >= 2 within the scope of the downgrade.

The assembly architecture override code pattern has been put there for
LL/SC instructions, so that code compiles for configurations that select
a processor to build for that does not support these instructions while
still providing run-time support for processors that do, dynamically
switched by non-constant `cpu_has_llsc'.  It went in with linux-mips.org
commit aac8aa7717a2 ("Enable a suitable ISA for the assembler around
ll/sc so that code builds even for processors that don't support the
instructions. Plus minor formatting fixes.") back in 2005.

Fix the problem by wrapping these instructions along with the adjacent
SYNC instructions only, following the practice established with commit
cfd54de3b0e4 ("MIPS: Avoid move psuedo-instruction whilst using
MIPS_ISA_LEVEL") and commit 378ed6f0e3c5 ("MIPS: Avoid using .set mips0
to restore ISA").  Strictly speaking the SYNC instructions do not have
to be wrapped as they are only used as a Loongson3 erratum workaround,
so they will be enabled in the assembler by default, but do this so as
to keep code consistent with other places.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: c7e2d71dda7a ("MIPS: Fix set_pte() for Netlogic XLR using cmpxchg64()")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix backtrace to always include init funtion names

commit 279917e27edc293eb645a25428c6ab3f3bca3f86 upstream.

I noticed that sometimes at kernel startup the backtraces did not
included the function names of init functions. Their address were not
resolved to function names and instead only the address was printed.

Debugging shows that the culprit is is_ksym_addr() which is called
by the backtrace functions to check if an address belongs to a function in
the kernel. The problem occurs only for CONFIG_KALLSYMS_ALL=y.

When looking at is_ksym_addr() one can see that for CONFIG_KALLSYMS_ALL=y
the function only tries to resolve the address via is_kernel() function,
which checks like this:
if (addr >= _stext && addr <= _end)
                return 1;
On parisc the init functions are located before _stext, so this check fails.
Other platforms seem to have all functions (including init functions)
behind _stext.

The following patch moves the _stext symbol at the beginning of the
kernel and thus includes the init section. This fixes the check and does
not seem to have any negative side effects on where the kernel mapping
happens in the map_pages() function in arch/parisc/mm/init.c.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@kernel.org # 5.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 9156/1: drop cc-option fallbacks for architecture selection

commit 418ace9992a7647c446ed3186df40cf165b67298 upstream.

Naresh and Antonio ran into a build failure with latest Debian
armhf compilers, with lots of output like

 tmp/ccY3nOAs.s:2215: Error: selected processor does not support `cpsid i' in ARM mode

As it turns out, $(cc-option) fails early here when the FPU is not
selected before CPU architecture is selected, as the compiler
option check runs before enabling -msoft-float, which causes
a problem when testing a target architecture level without an FPU:

cc1: error: '-mfloat-abi=hard': selected architecture lacks an FPU

Passing e.g. -march=armv6k+fp in place of -march=armv6k would avoid this
issue, but the fallback logic is already broken because all supported
compilers (gcc-5 and higher) are much more recent than these options,
and building with -march=armv5t as a fallback no longer works.

The best way forward that I see is to just remove all the checks, which
also has the nice side-effect of slightly improving the startup time for
'make'.

The -mtune=marvell-f option was apparently never supported by any mainline
compiler, and the custom Codesourcery gcc build that did support is
now too old to build kernels, so just use -mtune=xscale unconditionally
for those.

This should be safe to apply on all stable kernels, and will be required
in order to keep building them with gcc-11 and higher.

Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=996419
Reported-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Cc: Matthias Klose <doko@debian.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 9155/1: fix early early_iounmap()

commit 0d08e7bf0d0d1a29aff7b16ef516f7415eb1aa05 upstream.

Currently __set_fixmap() bails out with a warning when called in early boot
from early_iounmap(). Fix it, and while at it, make the comment a bit easier
to understand.

Cc: <stable@vger.kernel.org>
Fixes: b089c31c519c ("ARM: 8667/3: Fix memory attribute inconsistencies when using fixmap")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/net: udpgso_bench_rx: fix port argument

[ Upstream commit d336509cb9d03970911878bb77f0497f64fda061 ]

The below commit added optional support for passing a bind address.
It configures the sockaddr bind arguments before parsing options and
reconfigures on options -b and -4.

This broke support for passing port (-p) on its own.

Configure sockaddr after parsing all arguments.

Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxgb4: fix eeprom len when diagnostics not implemented

[ Upstream commit 4ca110bf8d9b31a60f8f8ff6706ea147d38ad97c ]

Ensure diagnostics monitoring support is implemented for the SFF 8472
compliant port module and set the correct length for ethtool port
module eeprom read.

Fixes: f56ec6766dcf ("cxgb4: Add support for ethtool i2c dump")
Signed-off-by: Manoj Malviya <manojmalviya@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: fix sk_refcnt underflow on linkdown and fallback

[ Upstream commit e5d5aadcf3cd59949316df49c27cb21788d7efe4 ]

We got the following WARNING when running ab/nginx
test with RDMA link flapping (up-down-up).
The reason is when smc_sock fallback and at linkdown
happens simultaneously, we may got the following situation:

__smc_lgr_terminate()
 --> smc_conn_kill()
    --> smc_close_active_abort()
           smc_sock->sk_state = SMC_CLOSED
           sock_put(smc_sock)

smc_sock was set to SMC_CLOSED and sock_put() been called
when terminate the link group. But later application call
close() on the socket, then we got:

__smc_release():
    if (smc_sock->fallback)
        smc_sock->sk_state = SMC_CLOSED
        sock_put(smc_sock)

Again we set the smc_sock to CLOSED through it's already
in CLOSED state, and double put the refcnt, so the following
warning happens:

refcount_t: underflow; use-after-free.
WARNING: CPU: 5 PID: 860 at lib/refcount.c:28 refcount_warn_saturate+0x8d/0xf0
Modules linked in:
CPU: 5 PID: 860 Comm: nginx Not tainted 5.10.46+ #403
Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8c24b4c 04/01/2014
RIP: 0010:refcount_warn_saturate+0x8d/0xf0
Code: 05 5c 1e b5 01 01 e8 52 25 bc ff 0f 0b c3 80 3d 4f 1e b5 01 00 75 ad 48

RSP: 0018:ffffc90000527e50 EFLAGS: 00010286
RAX: 0000000000000026 RBX: ffff8881300df2c0 RCX: 0000000000000027
RDX: 0000000000000000 RSI: ffff88813bd58040 RDI: ffff88813bd58048
RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000001
R10: ffff8881300df2c0 R11: ffffc90000527c78 R12: ffff8881300df340
R13: ffff8881300df930 R14: ffff88810b3dad80 R15: ffff8881300df4f8
FS:  00007f739de8fb80(0000) GS:ffff88813bd40000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000a01b008 CR3: 0000000111b64003 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 smc_release+0x353/0x3f0
 __sock_release+0x3d/0xb0
 sock_close+0x11/0x20
 __fput+0x93/0x230
 task_work_run+0x65/0xa0
 exit_to_user_mode_prepare+0xf9/0x100
 syscall_exit_to_user_mode+0x27/0x190
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

This patch adds check in __smc_release() to make
sure we won't do an extra sock_put() and set the
socket to CLOSED when its already in CLOSED state.

Fixes: 51f1de79ad8e (net/smc: replace sock_put worker by socket refcounting)
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vsock: prevent unnecessary refcnt inc for nonblocking connect

[ Upstream commit c7cd82b90599fa10915f41e3dd9098a77d0aa7b6 ]

Currently vosck_connect() increments sock refcount for nonblocking
socket each time it's called, which can lead to memory leak if
it's called multiple times because connect timeout function decrements
sock refcount only once.

Fixes it by making vsock_connect() return -EALREADY immediately when
sock state is already SS_CONNECTING.

Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: allow a tc-taprio base-time of zero

[ Upstream commit f64ab8e4f368f48afb08ae91928e103d17b235e9 ]

Commit fe28c53ed71d ("net: stmmac: fix taprio configuration when
base_time is in the past") allowed some base time values in the past,
but apparently not all, the base-time value of 0 (Jan 1st 1970) is still
explicitly denied by the driver.

Remove the bogus check.

Fixes: b60189e0392f ("net: stmmac: Integrate EST with TAPRIO scheduler API")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: allow configure ETS bandwidth of all TCs

[ Upstream commit 688db0c7a4a69ddc8b8143a1cac01eb20082a3aa ]

Currently, driver only allow configuring ETS bandwidth of TCs according
to the max TC number queried from firmware. However, the hardware actually
supports 8 TCs and users may need to configure ETS bandwidth of all TCs,
so remove the restriction.

Fixes: 330baff5423b ("net: hns3: add ETS TC weight setting in SSU module")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix kernel crash when unload VF while it is being reset

[ Upstream commit e140c7983e3054be0652bf914f4454f16c5520b0 ]

When fully configure VLANs for a VF, then unload the VF while
triggering a reset to PF, will cause a kernel crash because the
irq is already uninit.

[ 293.177579] ------------[ cut here ]------------
[ 293.183502] kernel BUG at drivers/pci/msi.c:352!
[ 293.189547] Internal error: Oops - BUG: 0 [#1] SMP
......
[ 293.390124] Workqueue: hclgevf hclgevf_service_task [hclgevf]
[ 293.402627] pstate: 80c00009 (Nzcv daif +PAN +UAO)
[ 293.414324] pc : free_msi_irqs+0x19c/0x1b8
[ 293.425429] lr : free_msi_irqs+0x18c/0x1b8
[ 293.436545] sp : ffff00002716fbb0
[ 293.446950] x29: ffff00002716fbb0 x28: 0000000000000000
[ 293.459519] x27: 0000000000000000 x26: ffff45b91ea16b00
[ 293.472183] x25: 0000000000000000 x24: ffffa587b08f4700
[ 293.484717] x23: ffffc591ac30e000 x22: ffffa587b08f8428
[ 293.497190] x21: ffffc591ac30e300 x20: 0000000000000000
[ 293.509594] x19: ffffa58a062a8300 x18: 0000000000000000
[ 293.521949] x17: 0000000000000000 x16: ffff45b91dcc3f48
[ 293.534013] x15: 0000000000000000 x14: 0000000000000000
[ 293.545883] x13: 0000000000000040 x12: 0000000000000228
[ 293.557508] x11: 0000000000000020 x10: 0000000000000040
[ 293.568889] x9 : ffff45b91ea1e190 x8 : ffffc591802d0000
[ 293.580123] x7 : ffffc591802d0148 x6 : 0000000000000120
[ 293.591190] x5 : ffffc591802d0000 x4 : 0000000000000000
[ 293.602015] x3 : 0000000000000000 x2 : 0000000000000000
[ 293.612624] x1 : 00000000000004a4 x0 : ffffa58a1e0c6b80
[ 293.623028] Call trace:
[ 293.630340] free_msi_irqs+0x19c/0x1b8
[ 293.638849] pci_disable_msix+0x118/0x140
[ 293.647452] pci_free_irq_vectors+0x20/0x38
[ 293.656081] hclgevf_uninit_msi+0x44/0x58 [hclgevf]
[ 293.665309] hclgevf_reset_rebuild+0x1ac/0x2e0 [hclgevf]
[ 293.674866] hclgevf_reset+0x358/0x400 [hclgevf]
[ 293.683545] hclgevf_reset_service_task+0xd0/0x1b0 [hclgevf]
[ 293.693325] hclgevf_service_task+0x4c/0x2e8 [hclgevf]
[ 293.702307] process_one_work+0x1b0/0x448
[ 293.710034] worker_thread+0x54/0x468
[ 293.717331] kthread+0x134/0x138
[ 293.724114] ret_from_fork+0x10/0x18
[ 293.731324] Code: f940b000 b4ffff00 a903e7b8 f90017b6 (d4210000)

This patch fixes the problem by waiting for the VF reset done
while unloading the VF.

Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: sch_taprio: fix undefined behavior in ktime_mono_to_any

[ Upstream commit 6dc25401cba4d428328eade8ceae717633fdd702 ]

1) if q->tk_offset == TK_OFFS_MAX, then get_tcp_tstamp() calls
   ktime_mono_to_any() with out-of-bound value.

2) if q->tk_offset is changed in taprio_parse_clockid(),
   taprio_get_time() might also call ktime_mono_to_any()
   with out-of-bound value as sysbot found:

UBSAN: array-index-out-of-bounds in kernel/time/timekeeping.c:908:27
index 3 is out of range for type 'ktime_t *[3]'
CPU: 1 PID: 25668 Comm: kworker/u4:0 Not tainted 5.15.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151
 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291
 ktime_mono_to_any+0x1d4/0x1e0 kernel/time/timekeeping.c:908
 get_tcp_tstamp net/sched/sch_taprio.c:322 [inline]
 get_packet_txtime net/sched/sch_taprio.c:353 [inline]
 taprio_enqueue_one+0x5b0/0x1460 net/sched/sch_taprio.c:420
 taprio_enqueue+0x3b1/0x730 net/sched/sch_taprio.c:485
 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3785
 __dev_xmit_skb net/core/dev.c:3869 [inline]
 __dev_queue_xmit+0x1f6e/0x3630 net/core/dev.c:4194
 batadv_send_skb_packet+0x4a9/0x5f0 net/batman-adv/send.c:108
 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline]
 batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline]
 batadv_iv_send_outstanding_bat_ogm_packet+0x6d7/0x8e0 net/batman-adv/bat_iv_ogm.c:1701
 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298
 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445
 kthread+0x405/0x4f0 kernel/kthread.c:327
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295

Fixes: 7ede7b03484b ("taprio: make clock reference conversions easier")
Fixes: 54002066100b ("taprio: Adjust timestamps for TCP packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vedang Patel <vedang.patel@intel.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20211108180815.1822479-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

seq_file: fix passing wrong private data

[ Upstream commit 10a6de19cad6efb9b49883513afb810dc265fca2 ]

DEFINE_PROC_SHOW_ATTRIBUTE() is supposed to be used to define a series
of functions and variables to register proc file easily. And the users
can use proc_create_data() to pass their own private data and get it
via seq->private in the callback. Unfortunately, the proc file system
use PDE_DATA() to get private data instead of inode->i_private. So fix
it. Fortunately, there only one user of it which does not pass any
private data, so this bug does not break any in-tree codes.

Link: https://lkml.kernel.org/r/20211029032638.84884-1-songmuchun@bytedance.com
Fixes: 97a32539b956 ("proc: convert everything to "struct proc_ops"")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Florent Revest <revest@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gve: Fix off by one in gve_tx_timeout()

[ Upstream commit 1c360cc1cc883fbdf0a258b4df376571fbeac5ee ]

The priv->ntfy_blocks[] has "priv->num_ntfy_blks" elements so this >
needs to be >= to prevent an off by one bug.  The priv->ntfy_blocks[]
array is allocated in gve_alloc_notify_blocks().

Fixes: 87a7f321bb6a ("gve: Recover from queue stall due to missed IRQ")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>