Revert "Add a reference to ucounts for each cred"

This reverts commit b2c4d9a33cc2dec7466f97eba2c4dd571ad798a5 which is
commit 905ae01c4ae2ae3df05bb141801b1db4b7d83c61 upstream.

This commit should not have been applied to the 5.10.y stable tree, so
revert it.

Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/87v93k4bl6.fsf@disp2133
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "cred: add missing return error code when set_cred_ucounts() failed"

This reverts commit 0855952ed4f1a6861fbb0e5d684efd447d7347c9 which is
commit 5e6b8a50a7cec5686ee2c4bda1d49899c79a7eae upstream.

The "original" commit 905ae01c4ae2 ("Add a reference to ucounts for each
cred"), should not have been applied to the 5.10.y tree, so revert it,
and the follow-on fixup patches as well.

Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/87v93k4bl6.fsf@disp2133
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ucounts: Increase ucounts reference counter before the security hook"

This reverts commit b493af3a66e067f93e5e03465507866ddeabff9e which is
commit bbb6d0f3e1feb43d663af089c7dedb23be6a04fb upstream.

The "original" commit 905ae01c4ae2 ("Add a reference to ucounts for each
cred"), should not have been applied to the 5.10.y tree, so revert it,
and the follow-on fixup patches as well.

Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/87v93k4bl6.fsf@disp2133
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubifs: report correct st_size for encrypted symlinks

commit 064c734986011390b4d111f1a99372b7f26c3850 upstream.

The stat() family of syscalls report the wrong size for encrypted
symlinks, which has caused breakage in several userspace programs.

Fix this by calling fscrypt_symlink_getattr() after ubifs_getattr() for
encrypted symlinks.  This function computes the correct size by reading
and decrypting the symlink target (if it's not already cached).

For more details, see the commit which added fscrypt_symlink_getattr().

Fixes: ca7f85be8d6c ("ubifs: Add support for encrypted symlinks")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210702065350.209646-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: report correct st_size for encrypted symlinks

commit 461b43a8f92e68e96c4424b31e15f2b35f1bbfa9 upstream.

The stat() family of syscalls report the wrong size for encrypted
symlinks, which has caused breakage in several userspace programs.

Fix this by calling fscrypt_symlink_getattr() after f2fs_getattr() for
encrypted symlinks.  This function computes the correct size by reading
and decrypting the symlink target (if it's not already cached).

For more details, see the commit which added fscrypt_symlink_getattr().

Fixes: cbaf042a3cc6 ("f2fs crypto: add symlink encryption")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210702065350.209646-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: report correct st_size for encrypted symlinks

commit 8c4bca10ceafc43b1ca0a9fab5fa27e13cbce99e upstream.

The stat() family of syscalls report the wrong size for encrypted
symlinks, which has caused breakage in several userspace programs.

Fix this by calling fscrypt_symlink_getattr() after ext4_getattr() for
encrypted symlinks.  This function computes the correct size by reading
and decrypting the symlink target (if it's not already cached).

For more details, see the commit which added fscrypt_symlink_getattr().

Fixes: f348c252320b ("ext4 crypto: add symlink encryption")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210702065350.209646-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fscrypt: add fscrypt_symlink_getattr() for computing st_size

commit d18760560593e5af921f51a8c9b64b6109d634c2 upstream.

Add a helper function fscrypt_symlink_getattr() which will be called
from the various filesystems' ->getattr() methods to read and decrypt
the target of encrypted symlinks in order to report the correct st_size.

Detailed explanation:

As required by POSIX and as documented in various man pages, st_size for
a symlink is supposed to be the length of the symlink target.
Unfortunately, st_size has always been wrong for encrypted symlinks
because st_size is populated from i_size from disk, which intentionally
contains the length of the encrypted symlink target.  That's slightly
greater than the length of the decrypted symlink target (which is the
symlink target that userspace usually sees), and usually won't match the
length of the no-key encoded symlink target either.

This hadn't been fixed yet because reporting the correct st_size would
require reading the symlink target from disk and decrypting or encoding
it, which historically has been considered too heavyweight to do in
->getattr().  Also historically, the wrong st_size had only broken a
test (LTP lstat03) and there were no known complaints from real users.
(This is probably because the st_size of symlinks isn't used too often,
and when it is, typically it's for a hint for what buffer size to pass
to readlink() -- which a slightly-too-large size still works for.)

However, a couple things have changed now.  First, there have recently
been complaints about the current behavior from real users:

- Breakage in rpmbuild:
  https://github.com/rpm-software-management/rpm/issues/1682
  https://github.com/google/fscrypt/issues/305

- Breakage in toybox cpio:
  https://www.mail-archive.com/toybox@lists.landley.net/msg07193.html

- Breakage in libgit2: https://issuetracker.google.com/issues/189629152
  (on Android public issue tracker, requires login)

Second, we now cache decrypted symlink targets in ->i_link.  Therefore,
taking the performance hit of reading and decrypting the symlink target
in ->getattr() wouldn't be as big a deal as it used to be, since usually
it will just save having to do the same thing later.

Also note that eCryptfs ended up having to read and decrypt symlink
targets in ->getattr() as well, to fix this same issue; see
commit 3a60a1686f0d ("eCryptfs: Decrypt symlink target for stat size").

So, let's just bite the bullet, and read and decrypt the symlink target
in ->getattr() in order to report the correct st_size.  Add a function
fscrypt_symlink_getattr() which the filesystems will call to do this.

(Alternatively, we could store the decrypted size of symlinks on-disk.
But there isn't a great place to do so, and encryption is meant to hide
the original size to some extent; that property would be lost.)

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210702065350.209646-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix race writing to an inline_data file while its xattrs are changing

commit a54c4613dac1500b40e4ab55199f7c51f028e848 upstream.

The location of the system.data extended attribute can change whenever
xattr_sem is not taken.  So we need to recalculate the i_inline_off
field since it mgiht have changed between ext4_write_begin() and
ext4_write_end().

This means that caching i_inline_off is probably not helpful, so in
the long run we should probably get rid of it and shrink the in-memory
ext4 inode slightly, but let's fix the race the simple way for now.

Cc: stable@kernel.org
Fixes: f19d5870cbf72 ("ext4: add normal write support for inline data")
Reported-by: syzbot+13146364637c7363a7de@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.62

Link: https://lore.kernel.org/r/20210901122300.503008474@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix potentially incorrect results with bpf_get_local_storage()

commit a2baf4e8bb0f306fbed7b5e6197c02896a638ab5 upstream.

Commit b910eaaaa4b8 ("bpf: Fix NULL pointer dereference in bpf_get_local_storage()
helper") fixed a bug for bpf_get_local_storage() helper so different tasks
won't mess up with each other's percpu local storage.

The percpu data contains 8 slots so it can hold up to 8 contexts (same or
different tasks), for 8 different program runs, at the same time. This in
general is sufficient. But our internal testing showed the following warning
multiple times:

  [...]
  warning: WARNING: CPU: 13 PID: 41661 at include/linux/bpf-cgroup.h:193
     __cgroup_bpf_run_filter_sock_ops+0x13e/0x180
  RIP: 0010:__cgroup_bpf_run_filter_sock_ops+0x13e/0x180
  <IRQ>
   tcp_call_bpf.constprop.99+0x93/0xc0
   tcp_conn_request+0x41e/0xa50
   ? tcp_rcv_state_process+0x203/0xe00
   tcp_rcv_state_process+0x203/0xe00
   ? sk_filter_trim_cap+0xbc/0x210
   ? tcp_v6_inbound_md5_hash.constprop.41+0x44/0x160
   tcp_v6_do_rcv+0x181/0x3e0
   tcp_v6_rcv+0xc65/0xcb0
   ip6_protocol_deliver_rcu+0xbd/0x450
   ip6_input_finish+0x11/0x20
   ip6_input+0xb5/0xc0
   ip6_sublist_rcv_finish+0x37/0x50
   ip6_sublist_rcv+0x1dc/0x270
   ipv6_list_rcv+0x113/0x140
   __netif_receive_skb_list_core+0x1a0/0x210
   netif_receive_skb_list_internal+0x186/0x2a0
   gro_normal_list.part.170+0x19/0x40
   napi_complete_done+0x65/0x150
   mlx5e_napi_poll+0x1ae/0x680
   __napi_poll+0x25/0x120
   net_rx_action+0x11e/0x280
   __do_softirq+0xbb/0x271
   irq_exit_rcu+0x97/0xa0
   common_interrupt+0x7f/0xa0
   </IRQ>
   asm_common_interrupt+0x1e/0x40
  RIP: 0010:bpf_prog_1835a9241238291a_tw_egress+0x5/0xbac
   ? __cgroup_bpf_run_filter_skb+0x378/0x4e0
   ? do_softirq+0x34/0x70
   ? ip6_finish_output2+0x266/0x590
   ? ip6_finish_output+0x66/0xa0
   ? ip6_output+0x6c/0x130
   ? ip6_xmit+0x279/0x550
   ? ip6_dst_check+0x61/0xd0
  [...]

Using drgn [0] to dump the percpu buffer contents showed that on this CPU
slot 0 is still available, but slots 1-7 are occupied and those tasks in
slots 1-7 mostly don't exist any more. So we might have issues in
bpf_cgroup_storage_unset().

Further debugging confirmed that there is a bug in bpf_cgroup_storage_unset().
Currently, it tries to unset "current" slot with searching from the start.
So the following sequence is possible:

  1. A task is running and claims slot 0
  2. Running BPF program is done, and it checked slot 0 has the "task"
     and ready to reset it to NULL (not yet).
  3. An interrupt happens, another BPF program runs and it claims slot 1
     with the *same* task.
  4. The unset() in interrupt context releases slot 0 since it matches "task".
  5. Interrupt is done, the task in process context reset slot 0.

At the end, slot 1 is not reset and the same process can continue to occupy
slots 2-7 and finally, when the above step 1-5 is repeated again, step 3 BPF
program won't be able to claim an empty slot and a warning will be issued.

To fix the issue, for unset() function, we should traverse from the last slot
to the first. This way, the above issue can be avoided.

The same reverse traversal should also be done in bpf_get_local_storage() helper
itself. Otherwise, incorrect local storage may be returned to BPF program.

  [0] https://github.com/osandov/drgn

Fixes: b910eaaaa4b8 ("bpf: Fix NULL pointer dereference in bpf_get_local_storage() helper")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210810010413.1976277-1-yhs@fb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: move put_tree() to avoid trim_trees refcount underflow and UAF

commit 67d69e9d1a6c889d98951c1d74b19332ce0565af upstream.

AUDIT_TRIM is expected to be idempotent, but multiple executions resulted
in a refcount underflow and use-after-free.

git bisect fingered commit fb041bb7c0a9 ("locking/refcount: Consolidate
implementations of refcount_t") but this patch with its more thorough
checking that wasn't in the x86 assembly code merely exposed a previously
existing tree refcount imbalance in the case of tree trimming code that
was refactored with prune_one() to remove a tree introduced in
commit 8432c7006297 ("audit: Simplify locking around untag_chunk()")

Move the put_tree() to cover only the prune_one() case.

Passes audit-testsuite and 3 passes of "auditctl -t" with at least one
directory watch.

Cc: Jan Kara <jack@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Seiji Nishikawa <snishika@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 8432c7006297 ("audit: Simplify locking around untag_chunk()")
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
[PM: reformatted/cleaned-up the commit description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: don't unconditionally copy_from_user a struct ifreq for socket ioctls

commit d0efb16294d145d157432feda83877ae9d7cdf37 upstream.

A common implementation of isatty(3) involves calling a ioctl passing
a dummy struct argument and checking whether the syscall failed --
bionic and glibc use TCGETS (passing a struct termios), and musl uses
TIOCGWINSZ (passing a struct winsize). If the FD is a socket, we will
copy sizeof(struct ifreq) bytes of data from the argument and return
-EFAULT if that fails. The result is that the isatty implementations
may return a non-POSIX-compliant value in errno in the case where part
of the dummy struct argument is inaccessible, as both struct termios
and struct winsize are smaller than struct ifreq (at least on arm64).

Although there is usually enough stack space following the argument
on the stack that this did not present a practical problem up to now,
with MTE stack instrumentation it's more likely for the copy to fail,
as the memory following the struct may have a different tag.

Fix the problem by adding an early check for whether the ioctl is a
valid socket ioctl, and return -ENOTTY if it isn't.

Fixes: 44c02a2c3dc5 ("dev_ioctl(): move copyin/copyout to callers")
Link: https://linux-review.googlesource.com/id/I869da6cf6daabc3e4b7b82ac979683ba05e27d4d
Signed-off-by: Peter Collingbourne <pcc@google.com>
Cc: <stable@vger.kernel.org> # 4.19
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "parisc: Add assembly implementations for memset, strlen, strcpy, strncpy and strcat"

commit f6a3308d6feb351d9854eb8b3f6289a1ac163125 upstream.

This reverts commit 83af58f8068ea3f7b3c537c37a30887bfa585069.

It turns out that at least the assembly implementation for strncpy() was
buggy.  Revert the whole commit and return back to the default coding.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.4+
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "floppy: reintroduce O_NDELAY fix"

commit c7e9d0020361f4308a70cdfd6d5335e273eb8717 upstream.

The patch breaks userspace implementations (e.g. fdutils) and introduces
regressions in behaviour. Previously, it was possible to O_NDELAY open a
floppy device with no media inserted or with write protected media without
an error. Some userspace tools use this particular behavior for probing.

It's not the first time when we revert this patch. Previous revert is in
commit f2791e7eadf4 (Revert "floppy: refactor open() flags handling").

This reverts commit 8a0c014cd20516ade9654fc13b51345ec58e7be8.

Link: https://lore.kernel.org/linux-block/de10cb47-34d1-5a88-7751-225ca380f735@compro.net/
Reported-by: Mark Hounschell <markh@compro.net>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Wim Osterholt <wim@djo.tudelft.nl>
Cc: Kurt Garloff <kurt@garloff.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kthread: Fix PF_KTHREAD vs to_kthread() race

commit 3a7956e25e1d7b3c148569e78895e1f3178122a9 upstream.

The kthread_is_per_cpu() construct relies on only being called on
PF_KTHREAD tasks (per the WARN in to_kthread). This gives rise to the
following usage pattern:

if ((p->flags & PF_KTHREAD) && kthread_is_per_cpu(p))

However, as reported by syzcaller, this is broken. The scenario is:

CPU0 CPU1 (running p)

(p->flags & PF_KTHREAD) // true

begin_new_exec()
  me->flags &= ~(PF_KTHREAD|...);
kthread_is_per_cpu(p)
  to_kthread(p)
    WARN(!(p->flags & PF_KTHREAD) <-- *SPLAT*

Introduce __to_kthread() that omits the WARN and is sure to check both
values.

Use this to remove the problematic pattern for kthread_is_per_cpu()
and fix a number of other kthread_*() functions that have similar
issues but are currently not used in ways that would expose the
problem.

Notably kthread_func() is only ever called on 'current', while
kthread_probe_data() is only used for PF_WQ_WORKER, which implies the
task is from kthread_create*().

Fixes: ac687e6e8c26 ("kthread: Extract KTHREAD_IS_PER_CPU")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <Valentin.Schneider@arm.com>
Link: https://lkml.kernel.org/r/YH6WJc825C4P0FCK@hirez.programming.kicks-ass.net
[ Drop the balance_push() hunk as it is not needed. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix NULL pointer dereference when deleting device by invalid id

commit e4571b8c5e9ffa1e85c0c671995bd4dcc5c75091 upstream.

[BUG]
It's easy to trigger NULL pointer dereference, just by removing a
non-existing device id:

 # mkfs.btrfs -f -m single -d single /dev/test/scratch1 \
     /dev/test/scratch2
 # mount /dev/test/scratch1 /mnt/btrfs
 # btrfs device remove 3 /mnt/btrfs

Then we have the following kernel NULL pointer dereference:

 BUG: kernel NULL pointer dereference, address: 0000000000000000
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP NOPTI
 CPU: 9 PID: 649 Comm: btrfs Not tainted 5.14.0-rc3-custom+ #35
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
 RIP: 0010:btrfs_rm_device+0x4de/0x6b0 [btrfs]
  btrfs_ioctl+0x18bb/0x3190 [btrfs]
  ? lock_is_held_type+0xa5/0x120
  ? find_held_lock.constprop.0+0x2b/0x80
  ? do_user_addr_fault+0x201/0x6a0
  ? lock_release+0xd2/0x2d0
  ? __x64_sys_ioctl+0x83/0xb0
  __x64_sys_ioctl+0x83/0xb0
  do_syscall_64+0x3b/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae

[CAUSE]
Commit a27a94c2b0c7 ("btrfs: Make btrfs_find_device_by_devspec return
btrfs_device directly") moves the "missing" device path check into
btrfs_rm_device().

But btrfs_rm_device() itself can have case where it only receives
@devid, with NULL as @device_path.

In that case, calling strcmp() on NULL will trigger the NULL pointer
dereference.

Before that commit, we handle the "missing" case inside
btrfs_find_device_by_devspec(), which will not check @device_path at all
if @devid is provided, thus no way to trigger the bug.

[FIX]
Before calling strcmp(), also make sure @device_path is not NULL.

Fixes: a27a94c2b0c7 ("btrfs: Make btrfs_find_device_by_devspec return btrfs_device directly")
CC: stable@vger.kernel.org # 5.4+
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: msm8994-angler: Fix gpio-reserved-ranges 85-88

commit f890f89d9a80fffbfa7ca791b78927e5b8aba869 upstream.

Reserve GPIO pins 85-88 as these aren't meant to be accessible from the
application CPUs (causes reboot). Yet another fix similar to
9134586715e3, 5f8d3ab136d0, which is needed to allow angler to boot after
3edfb7bd76bd ("gpiolib: Show correct direction from the beginning").

Fixes: feeaf56ac78d ("arm64: dts: msm8994 SoC and Huawei Angler (Nexus 6P) support")

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210415193913.1836153-1-petr.vorel@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lkdtm: Enable DOUBLE_FAULT on all architectures

commit f123c42bbeff26bfe8bdb08a01307e92d51eec39 upstream

Where feasible, I prefer to have all tests visible on all architectures,
but to have them wired to XFAIL. DOUBLE_FAIL was set up to XFAIL, but
wasn't actually being added to the test list.

Fixes: cea23efb4de2 ("lkdtm/bugs: Make double-fault test always available")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210623203936.3151093-7-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: mt7530: fix VLAN traffic leaks again

commit 7428022b50d0fbb4846dd0f00639ea09d36dff02 upstream.

When a port leaves a VLAN-aware bridge, the current code does not clear
other ports' matrix field bit. If the bridge is later set to VLAN-unaware
mode, traffic in the bridge may leak to that port.

Remove the VLAN filtering check in mt7530_port_bridge_leave.

Fixes: 474a2ddaa192 ("net: dsa: mt7530: fix VLAN traffic leaks")
Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: ucsi: Clear pending after acking connector change

commit 8c9b3caab3ac26db1da00b8117901640c55a69dd upstream.

It's possible that the interrupt handler for the UCSI driver signals a
connector changes after the handler clears the PENDING bit, but before
it has sent the acknowledge request. The result is that the handler is
invoked yet again, to ack the same connector change.

At least some versions of the Qualcomm UCSI firmware will not handle the
second - "spurious" - acknowledgment gracefully. So make sure to not
clear the pending flag until the change is acknowledged.

Any connector changes coming in after the acknowledgment, that would
have the pending flag incorrectly cleared, would afaict be covered by
the subsequent connector status check.

Fixes: 217504a05532 ("usb: typec: ucsi: Work around PPM losing change information")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-By: Benjamin Berg <bberg@redhat.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210516040953.622409-1-bjorn.andersson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: ucsi: Work around PPM losing change information

commit 217504a055325fe76ec1142aa15f14d3db77f94f upstream.

Some/many PPMs are simply clearing the change bitfield when a
notification on a port is acknowledge. Unfortunately, doing so means
that any changes between the GET_CONNECTOR_STATUS and ACK_CC_CI commands
is simply lost.

Work around this by re-fetching the connector status afterwards. We can
then infer any changes that we see have happened but that may not be
respresented in the change bitfield.

We end up with the following actions:
 1. UCSI_GET_CONNECTOR_STATUS, store result, update unprocessed_changes
 2. UCSI_GET_CAM_SUPPORTED, discard result
 3. ACK connector change
 4. UCSI_GET_CONNECTOR_STATUS, store result
 5. Infere lost changes by comparing UCSI_GET_CONNECTOR_STATUS results
 6. If PPM reported a new change, then restart in order to ACK
 7. Process everything as usual.

The worker is also changed to re-schedule itself if a new change
notification happened while it was running.

Doing this fixes quite commonly occurring issues where e.g. the UCSI
power supply would remain online even thought the ThunderBolt cable was
unplugged.

Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benjamin Berg <bberg@redhat.com>
Link: https://lore.kernel.org/r/20201009144047.505957-3-benjamin@sipsolutions.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: ucsi: acpi: Always decode connector change information

commit 47ea2929d58c35598e681212311d35b240c373ce upstream.

Normal commands may be reporting that a connector has changed. Always
call the usci_connector_change handler and let it take care of
scheduling the work when needed.
Doing this makes the ACPI code path identical to the CCG one.

Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benjamin Berg <bberg@redhat.com>
Link: https://lore.kernel.org/r/20201009144047.505957-2-benjamin@sipsolutions.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracepoint: Use rcu get state and cond sync for static call updates

commit 7b40066c97ec66a44e388f82fcf694987451768f upstream.

State transitions from 1->0->1 and N->2->1 callbacks require RCU
synchronization. Rather than performing the RCU synchronization every
time the state change occurs, which is quite slow when many tracepoints
are registered in batch, instead keep a snapshot of the RCU state on the
most recent transitions which belong to a chain, and conditionally wait
for a grace period on the last transition of the chain if one g.p. has
not elapsed since the last snapshot.

This applies to both RCU and SRCU.

This brings the performance regression caused by commit 231264d6927f
("Fix: tracepoint: static call function vs data state mismatch") back to
what it was originally.

Before this commit:

  # trace-cmd start -e all
  # time trace-cmd start -p nop

  real 0m10.593s
  user 0m0.017s
  sys 0m0.259s

After this commit:

  # trace-cmd start -e all
  # time trace-cmd start -p nop

  real 0m0.878s
  user 0m0.000s
  sys 0m0.103s

Link: https://lkml.kernel.org/r/20210805192954.30688-1-mathieu.desnoyers@efficios.com
Link: https://lore.kernel.org/io-uring/4ebea8f0-58c9-e571-fd30-0ce4f6f09c70@samba.org/
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Stefan Metzmacher <metze@samba.org>
Fixes: 231264d6927f ("Fix: tracepoint: static call function vs data state mismatch")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

srcu: Provide polling interfaces for Tiny SRCU grace periods

commit 8b5bd67cf6422b63ee100d76d8de8960ca2df7f0 upstream.

There is a need for a polling interface for SRCU grace
periods, so this commit supplies get_state_synchronize_srcu(),
start_poll_synchronize_srcu(), and poll_state_synchronize_srcu() for this
purpose.  The first can be used if future grace periods are inevitable
(perhaps due to a later call_srcu() invocation), the second if future
grace periods might not otherwise happen, and the third to check if a
grace period has elapsed since the corresponding call to either of the
first two.

As with get_state_synchronize_rcu() and cond_synchronize_rcu(),
the return value from either get_state_synchronize_srcu() or
start_poll_synchronize_srcu() must be passed in to a later call to
poll_state_synchronize_srcu().

Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
[ paulmck: Add EXPORT_SYMBOL_GPL() per kernel test robot feedback. ]
[ paulmck: Apply feedback from Neeraj Upadhyay. ]
Link: https://lore.kernel.org/lkml/20201117004017.GA7444@paulmck-ThinkPad-P72/
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

srcu: Make Tiny SRCU use multi-bit grace-period counter

commit 74612a07b83fc46c2b2e6f71a541d55b024ebefc upstream.

There is a need for a polling interface for SRCU grace periods.  This
polling needs to distinguish between an SRCU instance being idle on the
one hand or in the middle of a grace period on the other.  This commit
therefore converts the Tiny SRCU srcu_struct structure's srcu_idx from
a defacto boolean to a free-running counter, using the bottom bit to
indicate that a grace period is in progress.  The second-from-bottom
bit is thus used as the index returned by srcu_read_lock().

Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
[ paulmck: Fix ->srcu_lock_nesting[] indexing per Neeraj Upadhyay. ]
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

srcu: Provide internal interface to start a Tiny SRCU grace period

commit 1a893c711a600ab57526619b56e6f6b7be00956e upstream.

There is a need for a polling interface for SRCU grace periods.
This polling needs to initiate an SRCU grace period without
having to queue (and manage) a callback.  This commit therefore
splits the Tiny SRCU call_srcu() function into callback-queuing and
start-grace-period portions, with the latter in a new function named
srcu_gp_start_if_needed().

Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

srcu: Provide polling interfaces for Tree SRCU grace periods

commit 5358c9fa54b09b5d3d7811b033aa0838c1bbaaf2 upstream.

There is a need for a polling interface for SRCU grace
periods, so this commit supplies get_state_synchronize_srcu(),
start_poll_synchronize_srcu(), and poll_state_synchronize_srcu() for this
purpose.  The first can be used if future grace periods are inevitable
(perhaps due to a later call_srcu() invocation), the second if future
grace periods might not otherwise happen, and the third to check if a
grace period has elapsed since the corresponding call to either of the
first two.

As with get_state_synchronize_rcu() and cond_synchronize_rcu(),
the return value from either get_state_synchronize_srcu() or
start_poll_synchronize_srcu() must be passed in to a later call to
poll_state_synchronize_srcu().

Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
[ paulmck: Add EXPORT_SYMBOL_GPL() per kernel test robot feedback. ]
[ paulmck: Apply feedback from Neeraj Upadhyay. ]
Link: https://lore.kernel.org/lkml/20201117004017.GA7444@paulmck-ThinkPad-P72/
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

srcu: Provide internal interface to start a Tree SRCU grace period

commit 29d2bb94a8a126ce80ffbb433b648b32fdea524e upstream.

There is a need for a polling interface for SRCU grace periods.
This polling needs to initiate an SRCU grace period without having
to queue (and manage) a callback.  This commit therefore splits the
Tree SRCU __call_srcu() function into callback-initialization and
queuing/start-grace-period portions, with the latter in a new function
named srcu_gp_start_if_needed().  This function may be passed a NULL
callback pointer, in which case it will refrain from queuing anything.

Why have the new function mess with queuing?  Locking considerations,
of course!

Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Invoke per-CPU variable access with disabled interrupts

commit f66de7ac4849eb42a7b18e26b8ee49e08130fd27 upstream.

The power_pmu_event_init() callback access per-cpu variable
(cpu_hw_events) to check for event constraints and Branch Stack
(BHRB). Current usage is to disable preemption when accessing the
per-cpu variable, but this does not prevent timer callback from
interrupting event_init. Fix this by using 'local_irq_save/restore'
to make sure the code path is invoked with disabled interrupts.

This change is tested in mambo simulator to ensure that, if a timer
interrupt comes in during the per-cpu access in event_init, it will be
soft masked and replayed later. For testing purpose, introduced a
udelay() in power_pmu_event_init() to make sure a timer interrupt arrives
while in per-cpu variable access code between local_irq_save/resore.
As expected the timer interrupt was replayed later during local_irq_restore
called from power_pmu_event_init. This was confirmed by adding
breakpoint in mambo and checking the backtrace when timer_interrupt
was hit.

Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1606814880-1720-1-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf annotate: Fix jump parsing for C++ code.

commit 1f0e6edcd968ff19211245f7da6039e983aa51e5 upstream.

Considering the following testcase:

  int
  foo(int a, int b)
  {
     for (unsigned i = 0; i < 1000000000; i++)
       a += b;
     return a;
  }

  int main()
  {
     foo (3, 4);
     return 0;
  }

'perf annotate' displays:

  86.52 │40055e: → ja   40056c <foo(int, int)+0x26>
  13.37 │400560:   mov  -0x18(%rbp),%eax
        │400563:   add  %eax,-0x14(%rbp)
        │400566:   addl $0x1,-0x4(%rbp)
   0.11 │40056a: → jmp  400557 <foo(int, int)+0x11>
        │40056c:   mov  -0x14(%rbp),%eax
        │40056f:   pop  %rbp

and the 'ja 40056c' does not link to the location in the function.  It's
caused by fact that comma is wrongly parsed, it's part of function
signature.

With my patch I see:

  86.52 │   ┌──ja   26
  13.37 │   │  mov  -0x18(%rbp),%eax
        │   │  add  %eax,-0x14(%rbp)
        │   │  addl $0x1,-0x4(%rbp)
   0.11 │   │↑ jmp  11
        │26:└─→mov  -0x14(%rbp),%eax

and 'o' output prints:

  86.52 │4005┌── ↓ ja   40056c <foo(int, int)+0x26>
  13.37 │4005│0:   mov  -0x18(%rbp),%eax
        │4005│3:   add  %eax,-0x14(%rbp)
        │4005│6:   addl $0x1,-0x4(%rbp)
   0.11 │4005│a: ↑ jmp  400557 <foo(int, int)+0x11>
        │4005└─→   mov  -0x14(%rbp),%eax

On the contrary, compiling the very same file with gcc -x c, the parsing
is fine because function arguments are not displayed:

  jmp  400543 <foo+0x1d>

Committer testing:

Before:

  $ cat cpp_args_annotate.c
  int
  foo(int a, int b)
  {
     for (unsigned i = 0; i < 1000000000; i++)
       a += b;
     return a;
  }

  int main()
  {
     foo (3, 4);
     return 0;
  }
  $ gcc --version |& head -1
  gcc (GCC) 10.2.1 20201125 (Red Hat 10.2.1-9)
  $ gcc -g cpp_args_annotate.c -o cpp_args_annotate
  $ perf record ./cpp_args_annotate
  [ perf record: Woken up 2 times to write data ]
  [ perf record: Captured and wrote 0.275 MB perf.data (7188 samples) ]
  $ perf annotate --stdio2 foo
  Samples: 7K of event 'cycles:u', 4000 Hz, Event count (approx.): 7468429289, [percent: local period]
  foo() /home/acme/c/cpp_args_annotate
  Percent
              0000000000401106 <foo>:
              foo():
              int
              foo(int a, int b)
              {
                push %rbp
                mov  %rsp,%rbp
                mov  %edi,-0x14(%rbp)
                mov  %esi,-0x18(%rbp)
              for (unsigned i = 0; i < 1000000000; i++)
                movl $0x0,-0x4(%rbp)
              ↓ jmp  1d
              a += b;
   13.45  13:   mov  -0x18(%rbp),%eax
                add  %eax,-0x14(%rbp)
              for (unsigned i = 0; i < 1000000000; i++)
                addl $0x1,-0x4(%rbp)
    0.09  1d:   cmpl $0x3b9ac9ff,-0x4(%rbp)
   86.46      ↑ jbe  13
              return a;
                mov  -0x14(%rbp),%eax
              }
                pop  %rbp
              ← retq
  $

I.e. works for C, now lets switch to C++:

  $ g++ -g cpp_args_annotate.c -o cpp_args_annotate
  $ perf record ./cpp_args_annotate
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.268 MB perf.data (6976 samples) ]
  $ perf annotate --stdio2 foo
  Samples: 6K of event 'cycles:u', 4000 Hz, Event count (approx.): 7380681761, [percent: local period]
  foo() /home/acme/c/cpp_args_annotate
  Percent
              0000000000401106 <foo(int, int)>:
              foo(int, int):
              int
              foo(int a, int b)
              {
                push %rbp
                mov  %rsp,%rbp
                mov  %edi,-0x14(%rbp)
                mov  %esi,-0x18(%rbp)
              for (unsigned i = 0; i < 1000000000; i++)
                movl $0x0,-0x4(%rbp)
                cmpl $0x3b9ac9ff,-0x4(%rbp)
   86.53      → ja   40112c <foo(int, int)+0x26>
              a += b;
   13.32        mov  -0x18(%rbp),%eax
    0.00        add  %eax,-0x14(%rbp)
              for (unsigned i = 0; i < 1000000000; i++)
                addl $0x1,-0x4(%rbp)
    0.15      → jmp  401117 <foo(int, int)+0x11>
              return a;
                mov  -0x14(%rbp),%eax
              }
                pop  %rbp
              ← retq
  $

Reproduced.

Now with this patch:

Reusing the C++ built binary, as we can see here:

  $ readelf -wi cpp_args_annotate | grep producer
    <c>   DW_AT_producer    : (indirect string, offset: 0x2e): GNU C++14 10.2.1 20201125 (Red Hat 10.2.1-9) -mtune=generic -march=x86-64 -g
  $

And furthermore:

  $ file cpp_args_annotate
  cpp_args_annotate: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=4fe3cab260204765605ec630d0dc7a7e93c361a9, for GNU/Linux 3.2.0, with debug_info, not stripped
  $ perf buildid-list -i cpp_args_annotate
  4fe3cab260204765605ec630d0dc7a7e93c361a9
  $ perf buildid-list | grep cpp_args_annotate
  4fe3cab260204765605ec630d0dc7a7e93c361a9 /home/acme/c/cpp_args_annotate
  $

It now works:

  $ perf annotate --stdio2 foo
  Samples: 6K of event 'cycles:u', 4000 Hz, Event count (approx.): 7380681761, [percent: local period]
  foo() /home/acme/c/cpp_args_annotate
  Percent
              0000000000401106 <foo(int, int)>:
              foo(int, int):
              int
              foo(int a, int b)
              {
                push %rbp
                mov  %rsp,%rbp
                mov  %edi,-0x14(%rbp)
                mov  %esi,-0x18(%rbp)
              for (unsigned i = 0; i < 1000000000; i++)
                movl $0x0,-0x4(%rbp)
          11:   cmpl $0x3b9ac9ff,-0x4(%rbp)
   86.53      ↓ ja   26
              a += b;
   13.32        mov  -0x18(%rbp),%eax
    0.00        add  %eax,-0x14(%rbp)
              for (unsigned i = 0; i < 1000000000; i++)
                addl $0x1,-0x4(%rbp)
    0.15      ↑ jmp  11
              return a;
          26:   mov  -0x14(%rbp),%eax
              }
                pop  %rbp
              ← retq
  $

Signed-off-by: Martin Liška <mliska@suse.cz>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Link: http://lore.kernel.org/lkml/13e1a405-edf9-e4c2-4327-a9b454353730@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: Fix arm64 build error with gcc-11

commit 067012974c8ae31a8886046df082aeba93592972 upstream.

gcc version: 11.0.0 20210208 (experimental) (GCC)

Following build error on arm64:

.......
In function ‘printf’,
    inlined from ‘regs_dump__printf’ at util/session.c:1141:3,
    inlined from ‘regs__printf’ at util/session.c:1169:2:
/usr/include/aarch64-linux-gnu/bits/stdio2.h:107:10: \
  error: ‘%-5s’ directive argument is null [-Werror=format-overflow=]

107 |   return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, \
                __va_arg_pack ());

......
In function ‘fprintf’,
  inlined from ‘perf_sample__fprintf_regs.isra’ at \
    builtin-script.c:622:14:
/usr/include/aarch64-linux-gnu/bits/stdio2.h:100:10: \
    error: ‘%5s’ directive argument is null [-Werror=format-overflow=]
  100 |   return __fprintf_chk (__stream, __USE_FORTIFY_LEVEL - 1, __fmt,
  101 |                         __va_arg_pack ());

cc1: all warnings being treated as errors
.......

This patch fixes Wformat-overflow warnings. Add helper function to
convert NULL to "unknown".

Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: iecedge@gmail.com
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: http://lore.kernel.org/lkml/20210218031245.2078492-1-Jianlin.Lv@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf record: Fix memory leak in vDSO found using ASAN

commit 41d585411311abf187e5f09042978fe7073a9375 upstream.

I got several memory leak reports from Asan with a simple command.  It
was because VDSO is not released due to the refcount.  Like in
__dsos_addnew_id(), it should put the refcount after adding to the list.

  $ perf record true
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ]

  =================================================================
  ==692599==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 439 byte(s) in 1 object(s) allocated from:
    #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
    #1 0x559bce4aa8ee in dso__new_id util/dso.c:1256
    #2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132
    #3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347
    #4 0x559bce50826c in map__new util/map.c:175
    #5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787
    #6 0x559bce512f6b in machines__deliver_event util/session.c:1481
    #7 0x559bce515107 in perf_session__deliver_event util/session.c:1551
    #8 0x559bce51d4d2 in do_flush util/ordered-events.c:244
    #9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323
    #10 0x559bce519bea in __perf_session__process_events util/session.c:2268
    #11 0x559bce519bea in perf_session__process_events util/session.c:2297
    #12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017
    #13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234
    #14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026
    #15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858
    #16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308

  Indirect leak of 32 byte(s) in 1 object(s) allocated from:
    #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
    #1 0x559bce520907 in nsinfo__copy util/namespaces.c:169
    #2 0x559bce50821b in map__new util/map.c:168
    #3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787
    #4 0x559bce512f6b in machines__deliver_event util/session.c:1481
    #5 0x559bce515107 in perf_session__deliver_event util/session.c:1551
    #6 0x559bce51d4d2 in do_flush util/ordered-events.c:244
    #7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323
    #8 0x559bce519bea in __perf_session__process_events util/session.c:2268
    #9 0x559bce519bea in perf_session__process_events util/session.c:2297
    #10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017
    #11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234
    #12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026
    #13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858
    #14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308

  SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s).

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210315045641.700430-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf symbol-elf: Fix memory leak by freeing sdt_note.args

commit 69c9ffed6cede9c11697861f654946e3ae95a930 upstream.

Reported by ASan.

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fabian Hemmer <copy@copy.sh>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Link: http://lore.kernel.org/lkml/20210602220833.285226-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf env: Fix memory leak of bpf_prog_info_linear member

commit 67069a1f0fe5f9eeca86d954fff2087f5542a008 upstream.

ASan reported a memory leak caused by info_linear not being deallocated.

The info_linear was allocated during in perf_event__synthesize_one_bpf_prog().

This patch adds the corresponding free() when bpf_prog_info_node
is freed in perf_env__purge_bpf().

  $ sudo ./perf record -- sleep 5
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ]

  =================================================================
  ==297735==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 7688 byte(s) in 19 object(s) allocated from:
      #0 0x4f420f in malloc (/home/user/linux/tools/perf/perf+0x4f420f)
      #1 0xc06a74 in bpf_program__get_prog_info_linear /home/user/linux/tools/lib/bpf/libbpf.c:11113:16
      #2 0xb426fe in perf_event__synthesize_one_bpf_prog /home/user/linux/tools/perf/util/bpf-event.c:191:16
      #3 0xb42008 in perf_event__synthesize_bpf_events /home/user/linux/tools/perf/util/bpf-event.c:410:9
      #4 0x594596 in record__synthesize /home/user/linux/tools/perf/builtin-record.c:1490:8
      #5 0x58c9ac in __cmd_record /home/user/linux/tools/perf/builtin-record.c:1798:8
      #6 0x58990b in cmd_record /home/user/linux/tools/perf/builtin-record.c:2901:8
      #7 0x7b2a20 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
      #8 0x7b12ff in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
      #9 0x7b2583 in run_argv /home/user/linux/tools/perf/perf.c:409:2
      #10 0x7b0d79 in main /home/user/linux/tools/perf/perf.c:539:3
      #11 0x7fa357ef6b74 in __libc_start_main /usr/src/debug/glibc-2.33-8.fc34.x86_64/csu/../csu/libc-start.c:332:16

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20210602224024.300485-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Fixup patch_text panic in ftrace

commit 5ad84adf5456313e285734102367c861c436c5ed upstream.

Just like arm64, we can't trace the function in the patch_text path.

Here is the bug log:

[   45.234334] Unable to handle kernel paging request at virtual address ffffffd38ae80900
[   45.242313] Oops [#1]
[   45.244600] Modules linked in:
[   45.247678] CPU: 0 PID: 11 Comm: migration/0 Not tainted 5.9.0-00025-g9b7db83-dirty #215
[   45.255797] epc: ffffffe00021689a ra : ffffffe00021718e sp : ffffffe01afabb58
[   45.262955]  gp : ffffffe00136afa0 tp : ffffffe01af94d00 t0 : 0000000000000002
[   45.270200]  t1 : 0000000000000000 t2 : 0000000000000001 s0 : ffffffe01afabc08
[   45.277443]  s1 : ffffffe0013718a8 a0 : 0000000000000000 a1 : ffffffe01afabba8
[   45.284686]  a2 : 0000000000000000 a3 : 0000000000000000 a4 : c4c16ad38ae80900
[   45.291929]  a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000052464e43
[   45.299173]  s2 : 0000000000000001 s3 : ffffffe000206a60 s4 : ffffffe000206a60
[   45.306415]  s5 : 00000000000009ec s6 : ffffffe0013718a8 s7 : c4c16ad38ae80900
[   45.313658]  s8 : 0000000000000004 s9 : 0000000000000001 s10: 0000000000000001
[   45.320902]  s11: 0000000000000003 t3 : 0000000000000001 t4 : ffffffffd192fe79
[   45.328144]  t5 : ffffffffb8f80000 t6 : 0000000000040000
[   45.333472] status: 0000000200000100 badaddr: ffffffd38ae80900 cause: 000000000000000f
[   45.341514] ---[ end trace d95102172248fdcf ]---
[   45.346176] note: migration/0[11] exited with preempt_count 1

(gdb) x /2i $pc
=> 0xffffffe00021689a <__do_proc_dointvec+196>: sd      zero,0(s7)
   0xffffffe00021689e <__do_proc_dointvec+200>: li      s11,0

(gdb) bt
0  __do_proc_dointvec (tbl_data=0x0, table=0xffffffe01afabba8,
write=0, buffer=0x0, lenp=0x7bf897061f9a0800, ppos=0x4, conv=0x0,
data=0x52464e43) at kernel/sysctl.c:581
1  0xffffffe00021718e in do_proc_dointvec (data=<optimized out>,
conv=<optimized out>, ppos=<optimized out>, lenp=<optimized out>,
buffer=<optimized out>, write=<optimized out>, table=<optimized out>)
at kernel/sysctl.c:964
2  proc_dointvec_minmax (ppos=<optimized out>, lenp=<optimized out>,
buffer=<optimized out>, write=<optimized out>, table=<optimized out>)
at kernel/sysctl.c:964
3  proc_do_static_key (table=<optimized out>, write=1, buffer=0x0,
lenp=0x0, ppos=0x7bf897061f9a0800) at kernel/sysctl.c:1643
4  0xffffffe000206792 in ftrace_make_call (rec=<optimized out>,
addr=<optimized out>) at arch/riscv/kernel/ftrace.c:109
5  0xffffffe0002c9c04 in __ftrace_replace_code
(rec=0xffffffe01ae40c30, enable=3) at kernel/trace/ftrace.c:2503
6  0xffffffe0002ca0b2 in ftrace_replace_code (mod_flags=<optimized
out>) at kernel/trace/ftrace.c:2530
7  0xffffffe0002ca26a in ftrace_modify_all_code (command=5) at
kernel/trace/ftrace.c:2677
8  0xffffffe0002ca30e in __ftrace_modify_code (data=<optimized out>)
at kernel/trace/ftrace.c:2703
9  0xffffffe0002c13b0 in multi_cpu_stop (data=0x0) at kernel/stop_machine.c:224
10 0xffffffe0002c0fde in cpu_stopper_thread (cpu=<optimized out>) at
kernel/stop_machine.c:491
11 0xffffffe0002343de in smpboot_thread_fn (data=0x0) at kernel/smpboot.c:165
12 0xffffffe00022f8b4 in kthread (_create=0xffffffe01af0c040) at
kernel/kthread.c:292
13 0xffffffe000201fac in handle_exception () at arch/riscv/kernel/entry.S:236

   0xffffffe00020678a <+114>:   auipc   ra,0xffffe
   0xffffffe00020678e <+118>:   jalr    -118(ra) # 0xffffffe000204714 <patch_text_nosync>
   0xffffffe000206792 <+122>:   snez    a0,a0

(gdb) disassemble patch_text_nosync
Dump of assembler code for function patch_text_nosync:
   0xffffffe000204714 <+0>:     addi    sp,sp,-32
   0xffffffe000204716 <+2>:     sd      s0,16(sp)
   0xffffffe000204718 <+4>:     sd      ra,24(sp)
   0xffffffe00020471a <+6>:     addi    s0,sp,32
   0xffffffe00020471c <+8>:     auipc   ra,0x0
   0xffffffe000204720 <+12>:    jalr    -384(ra) # 0xffffffe00020459c <patch_insn_write>
   0xffffffe000204724 <+16>:    beqz    a0,0xffffffe00020472e <patch_text_nosync+26>
   0xffffffe000204726 <+18>:    ld      ra,24(sp)
   0xffffffe000204728 <+20>:    ld      s0,16(sp)
   0xffffffe00020472a <+22>:    addi    sp,sp,32
   0xffffffe00020472c <+24>:    ret
   0xffffffe00020472e <+26>:    sd      a0,-24(s0)
   0xffffffe000204732 <+30>:    auipc   ra,0x4
   0xffffffe000204736 <+34>:    jalr    -1464(ra) # 0xffffffe00020817a <flush_icache_all>
   0xffffffe00020473a <+38>:    ld      a0,-24(s0)
   0xffffffe00020473e <+42>:    ld      ra,24(sp)
   0xffffffe000204740 <+44>:    ld      s0,16(sp)
   0xffffffe000204742 <+46>:    addi    sp,sp,32
   0xffffffe000204744 <+48>:    ret

(gdb) disassemble flush_icache_all-4
Dump of assembler code for function flush_icache_all:
   0xffffffe00020817a <+0>:     addi    sp,sp,-8
   0xffffffe00020817c <+2>:     sd      ra,0(sp)
   0xffffffe00020817e <+4>:     auipc   ra,0xfffff
   0xffffffe000208182 <+8>:     jalr    -1822(ra) # 0xffffffe000206a60 <ftrace_caller>
   0xffffffe000208186 <+12>:    ld      ra,0(sp)
   0xffffffe000208188 <+14>:    addi    sp,sp,8
   0xffffffe00020818a <+0>:     addi    sp,sp,-16
   0xffffffe00020818c <+2>:     sd      s0,0(sp)
   0xffffffe00020818e <+4>:     sd      ra,8(sp)
   0xffffffe000208190 <+6>:     addi    s0,sp,16
   0xffffffe000208192 <+8>:     li      a0,0
   0xffffffe000208194 <+10>:    auipc   ra,0xfffff
   0xffffffe000208198 <+14>:    jalr    -410(ra) # 0xffffffe000206ffa <sbi_remote_fence_i>
   0xffffffe00020819c <+18>:    ld      s0,0(sp)
   0xffffffe00020819e <+20>:    ld      ra,8(sp)
   0xffffffe0002081a0 <+22>:    addi    sp,sp,16
   0xffffffe0002081a2 <+24>:    ret

(gdb) frame 5
(rec=0xffffffe01ae40c30, enable=3) at kernel/trace/ftrace.c:2503
2503                    return ftrace_make_call(rec, ftrace_addr);
(gdb) p /x rec->ip
$2 = 0xffffffe00020817a -> flush_icache_all !

When we modified flush_icache_all's patchable-entry with ftrace_caller:
 - Insert ftrace_caller at flush_icache_all prologue.
 - Call flush_icache_all to sync I/Dcache, but flush_icache_all is
just we modified by half.

Link: https://lore.kernel.org/linux-riscv/CAJF2gTT=oDWesWe0JVWvTpGi60-gpbNhYLdFWN_5EbyeqoEDdw@mail.gmail.com/T/#t
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Fixup wrong ftrace remove cflag

commit 67d945778099b14324811fe67c5aff2cda7a7ad5 upstream.

We must use $(CC_FLAGS_FTRACE) instead of directly using -pg. It
will cause -fpatchable-function-entry error.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: btusb: check conditions before enabling USB ALT 3 for WBS

commit 55981d3541812234e687062926ff199c83f79a39 upstream.

Some USB BT adapters don't satisfy the MTU requirement mentioned in
commit e848dbd364ac ("Bluetooth: btusb: Add support USB ALT 3 for WBS")
and have ALT 3 setting that produces no/garbled audio. Some adapters
with larger MTU were also reported to have problems with ALT 3.

Add a flag and check it and MTU before selecting ALT 3, falling back to
ALT 1. Enable the flag for Realtek, restoring the previous behavior for
non-Realtek devices.

Tested with USB adapters (mtu<72, no/garbled sound with ALT3, ALT1
works) BCM20702A1 0b05:17cb, CSR8510A10 0a12:0001, and (mtu>=72, ALT3
works) RTL8761BU 0bda:8771, Intel AX200 8087:0029 (after disabling
ALT6). Also got reports for (mtu>=72, ALT 3 reported to produce bad
audio) Intel 8087:0a2b.

Signed-off-by: Pauli Virtanen <pav@iki.fi>
Fixes: e848dbd364ac ("Bluetooth: btusb: Add support USB ALT 3 for WBS")
Tested-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Jonathan Lampérth <jon@h4n.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt_kdsetmode: extend console locking

commit 2287a51ba822384834dafc1c798453375d1107c7 upstream.

As per the long-suffering comment.

Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: call tipc_wait_for_connect only when dlen is not 0

commit 7387a72c5f84f0dfb57618f9e4770672c0d2e4c9 upstream.

__tipc_sendmsg() is called to send SYN packet by either tipc_sendmsg()
or tipc_connect(). The difference is in tipc_connect(), it will call
tipc_wait_for_connect() after __tipc_sendmsg() to wait until connecting
is done. So there's no need to wait in __tipc_sendmsg() for this case.

This patch is to fix it by calling tipc_wait_for_connect() only when dlen
is not 0 in __tipc_sendmsg(), which means it's called by tipc_connect().

Note this also fixes the failure in tipcutils/test/ptts/:

  # ./tipcTS &
  # ./tipcTC 9
  (hang)

Fixes: 36239dab6da7 ("tipc: fix implicit-connect for SYN+")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: spinand: Fix incorrect parameters for on-die ECC

The new generic NAND ECC framework stores the configuration and
requirements in separate places since commit 93ef92f6f422 ("mtd: nand: Use
the new generic ECC object"). In 5.10.x The SPI NAND layer still uses only
the requirements to track the ECC properties. This mismatch leads to
values of zero being used for ECC strength and step_size in the SPI NAND
layer wherever nanddev_get_ecc_conf() is used and therefore breaks the SPI
NAND on-die ECC support in 5.10.x.

By using nanddev_get_ecc_requirements() instead of nanddev_get_ecc_conf()
for SPI NAND, we make sure that the correct parameters for the detected
chip are used. In later versions (5.11.x) this is fixed anyway with the
implementation of the SPI NAND on-die ECC engine.

Cc: stable@vger.kernel.org # 5.10.x
Reported-by: voice INTER connect GmbH <developer@voiceinterconnect.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pipe: do FASYNC notifications for every pipe IO, not just state changes

commit fe67f4dd8daa252eb9aa7acb61555f3cc3c1ce4c upstream.

It turns out that the SIGIO/FASYNC situation is almost exactly the same
as the EPOLLET case was: user space really wants to be notified after
every operation.

Now, in a perfect world it should be sufficient to only notify user
space on "state transitions" when the IO state changes (ie when a pipe
goes from unreadable to readable, or from unwritable to writable).  User
space should then do as much as possible - fully emptying the buffer or
what not - and we'll notify it again the next time the state changes.

But as with EPOLLET, we have at least one case (stress-ng) where the
kernel sent SIGIO due to the pipe being marked for asynchronous
notification, but the user space signal handler then didn't actually
necessarily read it all before returning (it read more than what was
written, but since there could be multiple writes, it could leave data
pending).

The user space code then expected to get another SIGIO for subsequent
writes - even though the pipe had been readable the whole time - and
would only then read more.

This is arguably a user space bug - and Colin King already fixed the
stress-ng code in question - but the kernel regression rules are clear:
it doesn't matter if kernel people think that user space did something
silly and wrong.  What matters is that it used to work.

So if user space depends on specific historical kernel behavior, it's a
regression when that behavior changes.  It's on us: we were silly to
have that non-optimal historical behavior, and our old kernel behavior
was what user space was tested against.

Because of how the FASYNC notification was tied to wakeup behavior, this
was first broken by commits f467a6a66419 and 1b6b26ae7053 ("pipe: fix
and clarify pipe read/write wakeup logic"), but at the time it seems
nobody noticed.  Probably because the stress-ng problem case ends up
being timing-dependent too.

It was then unwittingly fixed by commit 3a34b13a88ca ("pipe: make pipe
writes always wake up readers") only to be broken again when by commit
3b844826b6c6 ("pipe: avoid unnecessary EPOLLET wakeups under normal
loads").

And at that point the kernel test robot noticed the performance
refression in the stress-ng.sigio.ops_per_sec case.  So the "Fixes" tag
below is somewhat ad hoc, but it matches when the issue was noticed.

Fix it for good (knock wood) by simply making the kill_fasync() case
separate from the wakeup case.  FASYNC is quite rare, and we clearly
shouldn't even try to use the "avoid unnecessary wakeups" logic for it.

Link: https://lore.kernel.org/lkml/20210824151337.GC27667@xsang-OptiPlex-9020/
Fixes: 3b844826b6c6 ("pipe: avoid unnecessary EPOLLET wakeups under normal loads")
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Oliver Sang <oliver.sang@intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pipe: avoid unnecessary EPOLLET wakeups under normal loads

commit 3b844826b6c6affa80755254da322b017358a2f4 upstream.

I had forgotten just how sensitive hackbench is to extra pipe wakeups,
and commit 3a34b13a88ca ("pipe: make pipe writes always wake up
readers") ended up causing a quite noticeable regression on larger
machines.

Now, hackbench isn't necessarily a hugely meaningful benchmark, and it's
not clear that this matters in real life all that much, but as Mel
points out, it's used often enough when comparing kernels and so the
performance regression shows up like a sore thumb.

It's easy enough to fix at least for the common cases where pipes are
used purely for data transfer, and you never have any exciting poll
usage at all.  So set a special 'poll_usage' flag when there is polling
activity, and make the ugly "EPOLLET has crazy legacy expectations"
semantics explicit to only that case.

I would love to limit it to just the broken EPOLLET case, but the pipe
code can't see the difference between epoll and regular select/poll, so
any non-read/write waiting will trigger the extra wakeup behavior.  That
is sufficient for at least the hackbench case.

Apart from making the odd extra wakeup cases more explicitly about
EPOLLET, this also makes the extra wakeup be at the _end_ of the pipe
write, not at the first write chunk.  That is actually much saner
semantics (as much as you can call any of the legacy edge-triggered
expectations for EPOLLET "sane") since it means that you know the wakeup
will happen once the write is done, rather than possibly in the middle
of one.

[ For stable people: I'm putting a "Fixes" tag on this, but I leave it
  up to you to decide whether you actually want to backport it or not.
  It likely has no impact outside of synthetic benchmarks  - Linus ]

Link: https://lore.kernel.org/lkml/20210802024945.GA8372@xsang-OptiPlex-9020/
Fixes: 3a34b13a88ca ("pipe: make pipe writes always wake up readers")
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Sandeep Patil <sspatil@android.com>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix race between marking inode needs to be logged and log syncing

commit bc0939fcfab0d7efb2ed12896b1af3d819954a14 upstream.

We have a race between marking that an inode needs to be logged, either
at btrfs_set_inode_last_trans() or at btrfs_page_mkwrite(), and between
btrfs_sync_log(). The following steps describe how the race happens.

1) We are at transaction N;

2) Inode I was previously fsynced in the current transaction so it has:

    inode->logged_trans set to N;

3) The inode's root currently has:

   root->log_transid set to 1
   root->last_log_commit set to 0

   Which means only one log transaction was committed to far, log
   transaction 0. When a log tree is created we set ->log_transid and
   ->last_log_commit of its parent root to 0 (at btrfs_add_log_tree());

4) One more range of pages is dirtied in inode I;

5) Some task A starts an fsync against some other inode J (same root), and
   so it joins log transaction 1.

   Before task A calls btrfs_sync_log()...

6) Task B starts an fsync against inode I, which currently has the full
   sync flag set, so it starts delalloc and waits for the ordered extent
   to complete before calling btrfs_inode_in_log() at btrfs_sync_file();

7) During ordered extent completion we have btrfs_update_inode() called
   against inode I, which in turn calls btrfs_set_inode_last_trans(),
   which does the following:

     spin_lock(&inode->lock);
     inode->last_trans = trans->transaction->transid;
     inode->last_sub_trans = inode->root->log_transid;
     inode->last_log_commit = inode->root->last_log_commit;
     spin_unlock(&inode->lock);

   So ->last_trans is set to N and ->last_sub_trans set to 1.
   But before setting ->last_log_commit...

8) Task A is at btrfs_sync_log():

   - it increments root->log_transid to 2
   - starts writeback for all log tree extent buffers
   - waits for the writeback to complete
   - writes the super blocks
   - updates root->last_log_commit to 1

   It's a lot of slow steps between updating root->log_transid and
   root->last_log_commit;

9) The task doing the ordered extent completion, currently at
   btrfs_set_inode_last_trans(), then finally runs:

     inode->last_log_commit = inode->root->last_log_commit;
     spin_unlock(&inode->lock);

   Which results in inode->last_log_commit being set to 1.
   The ordered extent completes;

10) Task B is resumed, and it calls btrfs_inode_in_log() which returns
    true because we have all the following conditions met:

    inode->logged_trans == N which matches fs_info->generation &&
    inode->last_subtrans (1) <= inode->last_log_commit (1) &&
    inode->last_subtrans (1) <= root->last_log_commit (1) &&
    list inode->extent_tree.modified_extents is empty

    And as a consequence we return without logging the inode, so the
    existing logged version of the inode does not point to the extent
    that was written after the previous fsync.

It should be impossible in practice for one task be able to do so much
progress in btrfs_sync_log() while another task is at
btrfs_set_inode_last_trans() right after it reads root->log_transid and
before it reads root->last_log_commit. Even if kernel preemption is enabled
we know the task at btrfs_set_inode_last_trans() can not be preempted
because it is holding the inode's spinlock.

However there is another place where we do the same without holding the
spinlock, which is in the memory mapped write path at:

  vm_fault_t btrfs_page_mkwrite(struct vm_fault *vmf)
  {
     (...)
     BTRFS_I(inode)->last_trans = fs_info->generation;
     BTRFS_I(inode)->last_sub_trans = BTRFS_I(inode)->root->log_transid;
     BTRFS_I(inode)->last_log_commit = BTRFS_I(inode)->root->last_log_commit;
     (...)

So with preemption happening after setting ->last_sub_trans and before
setting ->last_log_commit, it is less of a stretch to have another task
do enough progress at btrfs_sync_log() such that the task doing the memory
mapped write ends up with ->last_sub_trans and ->last_log_commit set to
the same value. It is still a big stretch to get there, as the task doing
btrfs_sync_log() has to start writeback, wait for its completion and write
the super blocks.

So fix this in two different ways:

1) For btrfs_set_inode_last_trans(), simply set ->last_log_commit to the
   value of ->last_sub_trans minus 1;

2) For btrfs_page_mkwrite() only set the inode's ->last_sub_trans, just
   like we do for buffered and direct writes at btrfs_file_write_iter(),
   which is all we need to make sure multiple writes and fsyncs to an
   inode in the same transaction never result in an fsync missing that
   the inode changed and needs to be logged. Turn this into a helper
   function and use it both at btrfs_page_mkwrite() and at
   btrfs_file_write_iter() - this also fixes the problem that at
   btrfs_page_mkwrite() we were setting those fields without the
   protection of the inode's spinlock.

This is an extremely unlikely race to happen in practice.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/rds: dma_map_sg is entitled to merge entries

[ Upstream commit fb4b1373dcab086d0619c29310f0466a0b2ceb8a ]

Function "dma_map_sg" is entitled to merge adjacent entries
and return a value smaller than what was passed as "nents".

Subsequently "ib_map_mr_sg" needs to work with this value ("sg_dma_len")
rather than the original "nents" parameter ("sg_len").

This old RDS bug was exposed and reliably causes kernel panics
(using RDMA operations "rds-stress -D") on x86_64 starting with:
commit c588072bba6b ("iommu/vt-d: Convert intel iommu driver to the iommu ops")

Simply put: Linux 5.11 and later.

Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Link: https://lore.kernel.org/r/60efc69f-1f35-529d-a7ef-da0549cad143@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/kms/nv50: workaround EFI GOP window channel format differences

[ Upstream commit e78b1b545c6cfe9f87fc577128e00026fff230ba ]

Should fix some initial modeset failures on (at least) Ampere boards.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/disp: power down unused DP links during init

[ Upstream commit 6eaa1f3c59a707332e921e32782ffcad49915c5e ]

When booted with multiple displays attached, the EFI GOP driver on (at
least) Ampere, can leave DP links powered up that aren't being used to
display anything.  This confuses our tracking of SOR routing, with the
likely result being a failed modeset and display engine hang.

Fix this by (ab?)using the DisableLT IED script to power-down the link,
restoring HW to a state the driver expects.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: Copy drm_wait_vblank to user before returning

[ Upstream commit fa0b1ef5f7a694f48e00804a391245f3471aa155 ]

[Why]
Userspace should get back a copy of drm_wait_vblank that's been modified
even when drm_wait_vblank_ioctl returns a failure.

Rationale:
drm_wait_vblank_ioctl modifies the request and expects the user to read
it back. When the type is RELATIVE, it modifies it to ABSOLUTE and updates
the sequence to become current_vblank_count + sequence (which was
RELATIVE), but now it became ABSOLUTE.
drmWaitVBlank (in libdrm) expects this to be the case as it modifies
the request to be Absolute so it expects the sequence to would have been
updated.

The change is in compat_drm_wait_vblank, which is called by
drm_compat_ioctl. This change of copying the data back regardless of the
return number makes it en par with drm_ioctl, which always copies the
data before returning.

[How]
Return from the function after everything has been copied to user.

Fixes IGT:kms_flip::modeset-vs-vblank-race-interruptible
Tested on ChromeOS Trogdor(msm)

Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Mark Yacoub <markyacoub@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210812194917.1703356-1-markyacoub@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-mq: don't grab rq's refcount in blk_mq_check_expired()

[ Upstream commit c797b40ccc340b8a66f7a7842aecc90bf749f087 ]

Inside blk_mq_queue_tag_busy_iter() we already grabbed request's
refcount before calling ->fn(), so needn't to grab it one more time
in blk_mq_check_expired().

Meantime remove extra request expire check in blk_mq_check_expired().

Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20210811155202.629575-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: change the workload type for some cards

[ Upstream commit 93c5701b00d50d192ce2247cb10d6c0b3fe25cd8 ]

change the workload type for some cards as it is needed.

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "drm/amd/pm: fix workload mismatch on vega10"

[ Upstream commit 2fd31689f9e44af949f60ff4f8aca013e628ab81 ]

This reverts commit 0979d43259e13846d86ba17e451e17fec185d240.
Revert this because it does not apply to all the cards.

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix null-pointer dereference in qed_rdma_create_qp()

[ Upstream commit d33d19d313d3466abdf8b0428be7837aff767802 ]

Fix a possible null-pointer dereference in qed_rdma_create_qp().

Changes from V2:
- Revert checkpatch fixes.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: qed ll2 race condition fixes

[ Upstream commit 37110237f31105d679fc0aa7b11cdec867750ea7 ]

Avoiding qed ll2 race condition and NULL pointer dereference as part
of the remove and recovery flows.

Changes form V1:
- Change (!p_rx->set_prod_addr).
- qed_ll2.c checkpatch fixes.

Change from V2:
- Revert "qed_ll2.c checkpatch fixes".

Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/virtio: fix build

[ Upstream commit a24ce06c70fe7df795a846ad713ccaa9b56a7666 ]

We use a spinlock now so add a stub.
Ignore bogus uninitialized variable warnings.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vringh: Use wiov->used to check for read/write desc order

[ Upstream commit e74cfa91f42c50f7f649b0eca46aa049754ccdbd ]

As __vringh_iov() traverses a descriptor chain, it populates
each descriptor entry into either read or write vring iov
and increments that iov's ->used member. So, as we iterate
over a descriptor chain, at any point, (riov/wriov)->used
value gives the number of descriptor enteries available,
which are to be read or written by the device. As all read
iovs must precede the write iovs, wiov->used should be zero
when we are traversing a read descriptor. Current code checks
for wiov->i, to figure out whether any previous entry in the
current descriptor chain was a write descriptor. However,
iov->i is only incremented, when these vring iovs are consumed,
at a later point, and remain 0 in __vringh_iov(). So, correct
the check for read and write descriptor order, to use
wiov->used.

Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Link: https://lore.kernel.org/r/1624591502-4827-1-git-send-email-neeraju@codeaurora.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio_vdpa: reject invalid vq indices

[ Upstream commit cb5d2c1f6cc0e5769099a7d44b9d08cf58cae206 ]

Do not call vDPA drivers' callbacks with vq indicies larger than what
the drivers indicate that they support.  vDPA drivers do not bounds
check the indices.

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20210701114652.21956-1-vincent.whitchurch@axis.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio_pci: Support surprise removal of virtio pci device

[ Upstream commit 43bb40c5b92659966bdf4bfe584fde0a3575a049 ]

When a virtio pci device undergo surprise removal (aka async removal in
PCIe spec), mark the device as broken so that any upper layer drivers can
abort any outstanding operation.

When a virtio net pci device undergo surprise removal which is used by a
NetworkManager, a below call trace was observed.

kernel:watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [kworker/1:1:27059]
watchdog: BUG: soft lockup - CPU#1 stuck for 52s! [kworker/1:1:27059]
CPU: 1 PID: 27059 Comm: kworker/1:1 Tainted: G S      W I  L    5.13.0-hotplug+ #8
Hardware name: Dell Inc. PowerEdge R640/0H28RR, BIOS 2.9.4 11/06/2020
Workqueue: events linkwatch_event
RIP: 0010:virtnet_send_command+0xfc/0x150 [virtio_net]
Call Trace:
 virtnet_set_rx_mode+0xcf/0x2a7 [virtio_net]
 ? __hw_addr_create_ex+0x85/0xc0
 __dev_mc_add+0x72/0x80
 igmp6_group_added+0xa7/0xd0
 ipv6_mc_up+0x3c/0x60
 ipv6_find_idev+0x36/0x80
 addrconf_add_dev+0x1e/0xa0
 addrconf_dev_config+0x71/0x130
 addrconf_notify+0x1f5/0xb40
 ? rtnl_is_locked+0x11/0x20
 ? __switch_to_asm+0x42/0x70
 ? finish_task_switch+0xaf/0x2c0
 ? raw_notifier_call_chain+0x3e/0x50
 raw_notifier_call_chain+0x3e/0x50
 netdev_state_change+0x67/0x90
 linkwatch_do_dev+0x3c/0x50
 __linkwatch_run_queue+0xd2/0x220
 linkwatch_event+0x21/0x30
 process_one_work+0x1c8/0x370
 worker_thread+0x30/0x380
 ? process_one_work+0x370/0x370
 kthread+0x118/0x140
 ? set_kthread_struct+0x40/0x40
 ret_from_fork+0x1f/0x30

Hence, add the ability to abort the command on surprise removal
which prevents infinite loop and system lockup.

Signed-off-by: Parav Pandit <parav@nvidia.com>
Link: https://lore.kernel.org/r/20210721142648.1525924-5-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio: Improve vq->broken access to avoid any compiler optimization

[ Upstream commit 60f0779862e4ab943810187752c462e85f5fa371 ]

Currently vq->broken field is read by virtqueue_is_broken() in busy
loop in one context by virtnet_send_command().

vq->broken is set to true in other process context by
virtio_break_device(). Reader and writer are accessing it without any
synchronization. This may lead to a compiler optimization which may
result to optimize reading vq->broken only once.

Hence, force reading vq->broken on each invocation of
virtqueue_is_broken() and also force writing it so that such
update is visible to the readers.

It is a theoretical fix that isn't yet encountered in the field.

Signed-off-by: Parav Pandit <parav@nvidia.com>
Link: https://lore.kernel.org/r/20210721142648.1525924-2-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: blocklist Qualcomm sm8150 in cpufreq-dt-platdev

[ Upstream commit 5d79e5ce5489b489cbc4c327305be9dfca0fc9ce ]

The Qualcomm sm8150 platform uses the qcom-cpufreq-hw driver, so
add it to the cpufreq-dt-platdev driver's blocklist.

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

opp: remove WARN when no valid OPPs remain

[ Upstream commit 335ffab3ef864539e814b9a2903b0ae420c1c067 ]

This WARN can be triggered per-core and the stack trace is not useful.
Replace it with plain dev_err(). Fix a comment while at it.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pnvm: accept multiple HW-type TLVs

[ Upstream commit 0f673c16c850250db386537a422c11d248fb123c ]

Some products (So) may have two different types of products
with different mac-type that are otherwise equivalent, and
have the same PNVM data, so the PNVM file will contain two
(or perhaps later more) HW-type TLVs. Accept the file and
use the data section that contains any matching entry.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210719140154.a6a86e903035.Ic0b1b75c45d386698859f251518e8a5144431938@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: renesas: rcar-usb2-clock-sel: Fix kernel NULL pointer dereference

[ Upstream commit 1669a941f7c4844ae808cf441db51dde9e94db07 ]

The probe was manually passing NULL instead of dev to devm_clk_hw_register.
This caused a Unable to handle kernel NULL pointer dereference error.
Fix this by passing 'dev'.

Signed-off-by: Adam Ford <aford173@gmail.com>
Fixes: a20a40a8bbc2 ("clk: renesas: rcar-usb2-clock-sel: Fix error handling in .probe()")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/uncore: Fix integer overflow on 23 bit left shift of a u32

[ Upstream commit 0b3a8738b76fe2087f7bc2bd59f4c78504c79180 ]

The u32 variable pci_dword is being masked with 0x1fffffff and then left
shifted 23 places. The shift is a u32 operation,so a value of 0x200 or
more in pci_dword will overflow the u32 and only the bottow 32 bits
are assigned to addr. I don't believe this was the original intent.
Fix this by casting pci_dword to a resource_size_t to ensure no
overflow occurs.

Note that the mask and 12 bit left shift operation does not need this
because the mask SNR_IMC_MMIO_MEM0_MASK and shift is always a 32 bit
value.

Fixes: ee49532b38dd ("perf/x86/intel/uncore: Add IMC uncore support for Snow Ridge")
Addresses-Coverity: ("Unintentional integer overflow")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20210706114553.28249-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: sifive-l2-cache: Fix 'select' matching

[ Upstream commit 1c8094e394bceb4f1880f9d539bdd255c130826e ]

When the schema fixups are applied to 'select' the result is a single
entry is required for a match, but that will never match as there should
be 2 entries. Also, a 'select' schema should have the widest possible
match, so use 'contains' which matches the compatible string(s) in any
position and not just the first position.

Fixes: 993dcfac64eb ("dt-bindings: riscv: sifive-l2-cache: convert bindings to json-schema")
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: u_audio: fix race condition on endpoint stop

[ Upstream commit 068fdad20454f815e61e6f6eb9f051a8b3120e88 ]

If the endpoint completion callback is call right after the ep_enabled flag
is cleared and before usb_ep_dequeue() is call, we could do a double free
on the request and the associated buffer.

Fix this by clearing ep_enabled after all the endpoint requests have been
dequeued.

Fixes: 7de8681be2cd ("usb: gadget: u_audio: Free requests only after callback")
Cc: stable <stable@vger.kernel.org>
Reported-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210827092927.366482-1-jbrunet@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: Fix syncmap memory leak

[ Upstream commit a63bcf08f0efb5348105bb8e0e1e8c6671077753 ]

A small race exists between intel_gt_retire_requests_timeout and
intel_timeline_exit which could result in the syncmap not getting
free'd. Rather than work to hard to seal this race, simply cleanup the
syncmap on fini.

unreferenced object 0xffff88813bc53b18 (size 96):
  comm "gem_close_race", pid 5410, jiffies 4294917818 (age 1105.600s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 00 00 00 00 0a 00 00 00  ................
    00 00 00 00 00 00 00 00 6b 6b 6b 6b 06 00 00 00  ........kkkk....
  backtrace:
    [<00000000120b863a>] __sync_alloc_leaf+0x1e/0x40 [i915]
    [<00000000042f6959>] __sync_set+0x1bb/0x240 [i915]
    [<0000000090f0e90f>] i915_request_await_dma_fence+0x1c7/0x400 [i915]
    [<0000000056a48219>] i915_request_await_object+0x222/0x360 [i915]
    [<00000000aaac4ee3>] i915_gem_do_execbuffer+0x1bd0/0x2250 [i915]
    [<000000003c9d830f>] i915_gem_execbuffer2_ioctl+0x405/0xce0 [i915]
    [<00000000fd7a8e68>] drm_ioctl_kernel+0xb0/0xf0 [drm]
    [<00000000e721ee87>] drm_ioctl+0x305/0x3c0 [drm]
    [<000000008b0d8986>] __x64_sys_ioctl+0x71/0xb0
    [<0000000076c362a4>] do_syscall_64+0x33/0x80
    [<00000000eb7a4831>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Fixes: 531958f6f357 ("drm/i915/gt: Track timeline activeness in enter/exit")
Cc: <stable@vger.kernel.org>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730195342.110234-1-matthew.brost@intel.com
(cherry picked from commit faf890985e30d5e88cc3a7c50c1bcad32f89ab7c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: fix kernel panic due to NULL pointer dereference of plat->est

[ Upstream commit 82a44ae113b7b35850f4542f0443fcab221e376a ]

In the case of taprio offload is not enabled, the error handling path
causes a kernel crash due to kernel NULL pointer deference.

Fix this by adding check for NULL before attempt to access 'plat->est'
on the mutex_lock() call.

The following kernel panic is observed without this patch:

RIP: 0010:mutex_lock+0x10/0x20
Call Trace:
tc_setup_taprio+0x482/0x560 [stmmac]
kmem_cache_alloc_trace+0x13f/0x490
taprio_disable_offload.isra.0+0x9d/0x180 [sch_taprio]
taprio_destroy+0x6c/0x100 [sch_taprio]
qdisc_create+0x2e5/0x4f0
tc_modify_qdisc+0x126/0x740
rtnetlink_rcv_msg+0x12b/0x380
_raw_spin_lock_irqsave+0x19/0x40
_raw_spin_unlock_irqrestore+0x18/0x30
create_object+0x212/0x340
rtnl_calcit.isra.0+0x110/0x110
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x191/0x230
netlink_sendmsg+0x243/0x470
sock_sendmsg+0x5e/0x60
____sys_sendmsg+0x20b/0x280
copy_msghdr_from_user+0x5c/0x90
__mod_memcg_state+0x87/0xf0
 ___sys_sendmsg+0x7c/0xc0
lru_cache_add+0x7f/0xa0
_raw_spin_unlock+0x16/0x30
wp_page_copy+0x449/0x890
handle_mm_fault+0x921/0xfc0
__sys_sendmsg+0x59/0xa0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
---[ end trace b1f19b24368a96aa ]---

Fixes: b60189e0392f ("net: stmmac: Integrate EST with TAPRIO scheduler API")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: add mutex lock to protect est parameters

[ Upstream commit b2aae654a4794ef898ad33a179f341eb610f6b85 ]

Add a mutex lock to protect est structure parameters so that the
EST parameters can be updated by other threads.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711"

[ Upstream commit 885814a97f5a1a2daf66bde5f2076f0bf632c174 ]

This reverts commit 419dd626e357e89fc9c4e3863592c8b38cfe1571.

It turned out that the change from the reverted commit breaks the ACPI
based rpi's because it causes the 100Mhz max clock to be overridden to the
return from sdhci_iproc_get_max_clock(), which is 0 because there isn't a
OF/DT based clock device.

Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Fixes: 419dd626e357 ("mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711")
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix get wrong pfc_en when query PFC configuration

[ Upstream commit 8c1671e0d13d4a0ba4fb3a0da932bf3736d7ff73 ]

Currently, when query PFC configuration by dcbtool, driver will return
PFC enable status based on TC. As all priorities are mapped to TC0 by
default, if TC0 is enabled, then all priorities mapped to TC0 will be
shown as enabled status when query PFC setting, even though some
priorities have never been set.

for example:
$ dcb pfc show dev eth0
pfc-cap 4 macsec-bypass off delay 0
prio-pfc 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off
$ dcb pfc set dev eth0 prio-pfc 0:on 1:on 2:on 3:on
$ dcb pfc show dev eth0
pfc-cap 4 macsec-bypass off delay 0
prio-pfc 0:on 1:on 2:on 3:on 4:on 5:on 6:on 7:on

To fix this problem, just returns user's PFC config parameter saved in
driver.

Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix duplicate node in VLAN list

[ Upstream commit 94391fae82f71c98ecc7716a32611fcca73c74eb ]

VLAN list should not be added duplicate VLAN node, otherwise it would
cause "add failed" when restore VLAN from VLAN list, so this patch adds
VLAN ID check before adding node into VLAN list.

Fixes: c6075b193462 ("net: hns3: Record VF vlan tables")
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: add waiting time before cmdq memory is released

[ Upstream commit a96d9330b02a3d051ae689bc2c5e7d3a2ba25594 ]

After the cmdq registers are cleared, the firmware may take time to
clear out possible left over commands in the cmdq. Driver must release
cmdq memory only after firmware has completed processing of left over
commands.

Fixes: 232d0d55fca6 ("net: hns3: uninitialize command queue while unloading PF driver")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: clear hardware resource when loading driver

[ Upstream commit 1a6d281946c330cee2855f6d0cd796616e54601f ]

If a PF is bonded to a virtual machine and the virtual machine exits
unexpectedly, some hardware resource cannot be cleared. In this case,
loading driver may cause exceptions. Therefore, the hardware resource
needs to be cleared when the driver is loaded.

Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtnetlink: Return correct error on changing device netns

[ Upstream commit 96a6b93b69880b2c978e1b2be9cae6970b605008 ]

Currently when device is moved between network namespaces using
RTM_NEWLINK message type and one of netns attributes (FLA_NET_NS_PID,
IFLA_NET_NS_FD, IFLA_TARGET_NETNSID) but w/o specifying IFLA_IFNAME, and
target namespace already has device with same name, userspace will get
EINVAL what is confusing and makes debugging harder.

Fix it so that userspace gets more appropriate EEXIST instead what makes
debugging much easier.

Before:

  # ./ifname.sh
  + ip netns add ns0
  + ip netns exec ns0 ip link add l0 type dummy
  + ip netns exec ns0 ip link show l0
  8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 66:90:b5:d5:78:69 brd ff:ff:ff:ff:ff:ff
  + ip link add l0 type dummy
  + ip link show l0
  10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 6e:c6:1f:15:20:8d brd ff:ff:ff:ff:ff:ff
  + ip link set l0 netns ns0
  RTNETLINK answers: Invalid argument

After:

  # ./ifname.sh
  + ip netns add ns0
  + ip netns exec ns0 ip link add l0 type dummy
  + ip netns exec ns0 ip link show l0
  8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 1e:4a:72:e3:e3:8f brd ff:ff:ff:ff:ff:ff
  + ip link add l0 type dummy
  + ip link show l0
  10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether f2:fc:fe:2b:7d:a6 brd ff:ff:ff:ff:ff:ff
  + ip link set l0 netns ns0
  RTNETLINK answers: File exists

The problem is that do_setlink() passes its `char *ifname` argument,
that it gets from a caller, to __dev_change_net_namespace() as is (as
`const char *pat`), but semantics of ifname and pat can be different.

For example, __rtnl_newlink() does this:

net/core/rtnetlink.c
    3270 char ifname[IFNAMSIZ];
     ...
    3286 if (tb[IFLA_IFNAME])
    3287 nla_strscpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ);
    3288 else
    3289 ifname[0] = '\0';
     ...
    3364 if (dev) {
     ...
    3394 return do_setlink(skb, dev, ifm, extack, tb, ifname, status);
    3395 }

, i.e. do_setlink() gets ifname pointer that is always valid no matter
if user specified IFLA_IFNAME or not and then do_setlink() passes this
ifname pointer as is to __dev_change_net_namespace() as pat argument.

But the pat (pattern) in __dev_change_net_namespace() is used as:

net/core/dev.c
   11198 err = -EEXIST;
   11199 if (__dev_get_by_name(net, dev->name)) {
   11200 /* We get here if we can't use the current device name */
   11201 if (!pat)
   11202 goto out;
   11203 err = dev_get_valid_name(net, dev, pat);
   11204 if (err < 0)
   11205 goto out;
   11206 }

As the result the `goto out` path on line 11202 is neven taken and
instead of returning EEXIST defined on line 11198,
__dev_change_net_namespace() returns an error from dev_get_valid_name()
and this, in turn, will be EINVAL for ifname[0] = '\0' set earlier.

Fixes: d8a5ec672768 ("[NET]: netlink support for moving devices between network namespaces.")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxgb4: dont touch blocked freelist bitmap after free

[ Upstream commit 43fed4d48d325e0a61dc2638a84da972fbb1087b ]

When adapter init fails, the blocked freelist bitmap is already freed
up and should not be touched. So, move the bitmap zeroing closer to
where it was successfully allocated. Also handle adapter init failure
unwind path immediately and avoid setting up RDMA memory windows.

Fixes: 5b377d114f2b ("cxgb4: Add debugfs facility to inject FL starvation")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv4: use siphash instead of Jenkins in fnhe_hashfun()

[ Upstream commit 6457378fe796815c973f631a1904e147d6ee33b1 ]

A group of security researchers brought to our attention
the weakness of hash function used in fnhe_hashfun().

Lets use siphash instead of Jenkins Hash, to considerably
reduce security risks.

Also remove the inline keyword, this really is distracting.

Fixes: d546c621542d ("ipv4: harden fnhe_hashfun()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: use siphash in rt6_exception_hash()

[ Upstream commit 4785305c05b25a242e5314cc821f54ade4c18810 ]

A group of security researchers brought to our attention
the weakness of hash function used in rt6_exception_hash()

Lets use siphash instead of Jenkins Hash, to considerably
reduce security risks.

Following patch deals with IPv4.

Fixes: 35732d01fe31 ("ipv6: introduce a hash table to store dst cache")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Cc: Wei Wang <weiwan@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: ets: fix crash when flipping from 'strict' to 'quantum'

[ Upstream commit cd9b50adc6bb9ad3f7d244590a389522215865c4 ]

While running kselftests, Hangbin observed that sch_ets.sh often crashes,
and splats like the following one are seen in the output of 'dmesg':

 BUG: kernel NULL pointer dereference, address: 0000000000000000
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 159f12067 P4D 159f12067 PUD 159f13067 PMD 0
 Oops: 0000 [#1] SMP NOPTI
 CPU: 2 PID: 921 Comm: tc Not tainted 5.14.0-rc6+ #458
 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
 RIP: 0010:__list_del_entry_valid+0x2d/0x50
 Code: 48 8b 57 08 48 b9 00 01 00 00 00 00 ad de 48 39 c8 0f 84 ac 6e 5b 00 48 b9 22 01 00 00 00 00 ad de 48 39 ca 0f 84 cf 6e 5b 00 <48> 8b 32 48 39 fe 0f 85 af 6e 5b 00 48 8b 50 08 48 39 f2 0f 85 94
 RSP: 0018:ffffb2da005c3890 EFLAGS: 00010217
 RAX: 0000000000000000 RBX: ffff9073ba23f800 RCX: dead000000000122
 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff9073ba23fbc8
 RBP: ffff9073ba23f890 R08: 0000000000000001 R09: 0000000000000001
 R10: 0000000000000001 R11: 0000000000000001 R12: dead000000000100
 R13: ffff9073ba23fb00 R14: 0000000000000002 R15: 0000000000000002
 FS:  00007f93e5564e40(0000) GS:ffff9073bba00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 000000014ad34000 CR4: 0000000000350ee0
 Call Trace:
  ets_qdisc_reset+0x6e/0x100 [sch_ets]
  qdisc_reset+0x49/0x1d0
  tbf_reset+0x15/0x60 [sch_tbf]
  qdisc_reset+0x49/0x1d0
  dev_reset_queue.constprop.42+0x2f/0x90
  dev_deactivate_many+0x1d3/0x3d0
  dev_deactivate+0x56/0x90
  qdisc_graft+0x47e/0x5a0
  tc_get_qdisc+0x1db/0x3e0
  rtnetlink_rcv_msg+0x164/0x4c0
  netlink_rcv_skb+0x50/0x100
  netlink_unicast+0x1a5/0x280
  netlink_sendmsg+0x242/0x480
  sock_sendmsg+0x5b/0x60
  ____sys_sendmsg+0x1f2/0x260
  ___sys_sendmsg+0x7c/0xc0
  __sys_sendmsg+0x57/0xa0
  do_syscall_64+0x3a/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7f93e44b8338
 Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 43 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55
 RSP: 002b:00007ffc0db737a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 0000000061255c06 RCX: 00007f93e44b8338
 RDX: 0000000000000000 RSI: 00007ffc0db73810 RDI: 0000000000000003
 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
 R10: 000000000000000b R11: 0000000000000246 R12: 0000000000000001
 R13: 0000000000687880 R14: 0000000000000000 R15: 0000000000000000
 Modules linked in: sch_ets sch_tbf dummy rfkill iTCO_wdt iTCO_vendor_support intel_rapl_msr intel_rapl_common joydev i2c_i801 pcspkr i2c_smbus lpc_ich virtio_balloon ip_tables xfs libcrc32c crct10dif_pclmul crc32_pclmul crc32c_intel ahci libahci ghash_clmulni_intel libata serio_raw virtio_blk virtio_console virtio_net net_failover failover sunrpc dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

When the change() function decreases the value of 'nstrict', we must take
into account that packets might be already enqueued on a class that flips
from 'strict' to 'quantum': otherwise that class will not be added to the
bandwidth-sharing list. Then, a call to ets_qdisc_reset() will attempt to
do list_del(&alist) with 'alist' filled with zero, hence the NULL pointer
dereference.
For classes flipping from 'strict' to 'quantum', initialize an empty list
and eventually add it to the bandwidth-sharing list, if there are packets
already enqueued. In this way, the kernel will:
 a) prevent crashing as described above.
 b) avoid retaining the backlog packets (for an arbitrarily long time) in
    case no packet is enqueued after a change from 'strict' to 'quantum'.

Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: dcc68b4d8084 ("net: sch_ets: Add a new Qdisc")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ucounts: Increase ucounts reference counter before the security hook

[ Upstream commit bbb6d0f3e1feb43d663af089c7dedb23be6a04fb ]

We need to increment the ucounts reference counter befor security_prepare_creds()
because this function may fail and abort_creds() will try to decrement
this reference.

[   96.465056][ T8641] FAULT_INJECTION: forcing a failure.
[   96.465056][ T8641] name fail_page_alloc, interval 1, probability 0, space 0, times 0
[   96.478453][ T8641] CPU: 1 PID: 8641 Comm: syz-executor668 Not tainted 5.14.0-rc6-syzkaller #0
[   96.487215][ T8641] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[   96.497254][ T8641] Call Trace:
[   96.500517][ T8641]  dump_stack_lvl+0x1d3/0x29f
[   96.505758][ T8641]  ? show_regs_print_info+0x12/0x12
[   96.510944][ T8641]  ? log_buf_vmcoreinfo_setup+0x498/0x498
[   96.516652][ T8641]  should_fail+0x384/0x4b0
[   96.521141][ T8641]  prepare_alloc_pages+0x1d1/0x5a0
[   96.526236][ T8641]  __alloc_pages+0x14d/0x5f0
[   96.530808][ T8641]  ? __rmqueue_pcplist+0x2030/0x2030
[   96.536073][ T8641]  ? lockdep_hardirqs_on_prepare+0x3e2/0x750
[   96.542056][ T8641]  ? alloc_pages+0x3f3/0x500
[   96.546635][ T8641]  allocate_slab+0xf1/0x540
[   96.551120][ T8641]  ___slab_alloc+0x1cf/0x350
[   96.555689][ T8641]  ? kzalloc+0x1d/0x30
[   96.559740][ T8641]  __kmalloc+0x2e7/0x390
[   96.563980][ T8641]  ? kzalloc+0x1d/0x30
[   96.568029][ T8641]  kzalloc+0x1d/0x30
[   96.571903][ T8641]  security_prepare_creds+0x46/0x220
[   96.577174][ T8641]  prepare_creds+0x411/0x640
[   96.581747][ T8641]  __sys_setfsuid+0xe2/0x3a0
[   96.586333][ T8641]  do_syscall_64+0x3d/0xb0
[   96.590739][ T8641]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   96.596611][ T8641] RIP: 0033:0x445a69
[   96.600483][ T8641] Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 11 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
[   96.620152][ T8641] RSP: 002b:00007f1054173318 EFLAGS: 00000246 ORIG_RAX: 000000000000007a
[   96.628543][ T8641] RAX: ffffffffffffffda RBX: 00000000004ca4c8 RCX: 0000000000445a69
[   96.636600][ T8641] RDX: 0000000000000010 RSI: 00007f10541732f0 RDI: 0000000000000000
[   96.644550][ T8641] RBP: 00000000004ca4c0 R08: 0000000000000001 R09: 0000000000000000
[   96.652500][ T8641] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004ca4cc
[   96.660631][ T8641] R13: 00007fffffe0b62f R14: 00007f1054173400 R15: 0000000000022000

Fixes: 905ae01c4ae2 ("Add a reference to ucounts for each cred")
Reported-by: syzbot+01985d7909f9468f013c@syzkaller.appspotmail.com
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Link: https://lkml.kernel.org/r/97433b1742c3331f02ad92de5a4f07d673c90613.1629735352.git.legion@kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: marvell: fix MVNETA_TX_IN_PRGRS bit number

[ Upstream commit 359f4cdd7d78fdf8c098713b05fee950a730f131 ]

According to Armada XP datasheet bit at 0 position is corresponding for
TxInProg indication.

Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit")
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xgene-v2: Fix a resource leak in the error handling path of 'xge_probe()'

[ Upstream commit 5ed74b03eb4d08f5dd281dcb5f1c9bb92b363a8d ]

A successful 'xge_mdio_config()' call should be balanced by a corresponding
'xge_mdio_remove()' call in the error handling path of the probe, as
already done in the remove function.

Update the error handling path accordingly.

Fixes: ea8ab16ab225 ("drivers: net: xgene-v2: Add MDIO support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ip_gre: add validation for csum_start

[ Upstream commit 1d011c4803c72f3907eccfc1ec63caefb852fcbf ]

Validate csum_start in gre_handle_offloads before we call _gre_xmit so
that we do not crash later when the csum_start value is used in the
lco_csum function call.

This patch deals with ipv4 code.

Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Reported-by: syzbot+ff8e1b9f2f36481e2efc@syzkaller.appspotmail.com
Signed-off-by: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/efa: Free IRQ vectors on error flow

[ Upstream commit dbe986bdfd6dfe6ef24b833767fff4151e024357 ]

Make sure to free the IRQ vectors in case the allocation doesn't return
the expected number of IRQs.

Fixes: b7f5e880f377 ("RDMA/efa: Add the efa module")
Link: https://lore.kernel.org/r/20210811151131.39138-2-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

e1000e: Do not take care about recovery NVM checksum

[ Upstream commit 4051f68318ca9f3d3becef3b54e70ad2c146df97 ]

On new platforms, the NVM is read-only. Attempting to update the NVM
is causing a lockup to occur. Do not attempt to write to the NVM
on platforms where it's not supported.
Emit an error message when the NVM checksum is invalid.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213667
Fixes: fb776f5d57ee ("e1000e: Add support for Tiger Lake")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

e1000e: Fix the max snoop/no-snoop latency for 10M

[ Upstream commit 44a13a5d99c71bf9e1676d9e51679daf4d7b3d73 ]

We should decode the latency and the max_latency before directly compare.
The latency should be presented as lat_enc = scale x value:
lat_enc_d = (lat_enc & 0x0x3ff) x (1U << (5*((max_ltr_enc & 0x1c00)
>> 10)))

Fixes: cf8fb73c23aa ("e1000e: add support for LTR on I217/I218")
Suggested-by: Yee Li <seven.yi.lee@gmail.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: Use num_tx_queues when iterating over tx_ring queue

[ Upstream commit 691bd4d7761992914a0e83c27a4ce57d01474cda ]

Use num_tx_queues rather than the IGC_MAX_TX_QUEUES fixed number 4 when
iterating over tx_ring queue since instantiated queue count could be
less than 4 where on-line cpu count is less than 4.

Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading")
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: fix page fault when thunderbolt is unplugged

[ Upstream commit 4b79959510e6612d80f8d86022e0cb44eee6f4a2 ]

After unplug thunderbolt dock with i225, pciehp interrupt is triggered,
remove call will read/write mmio address which is already disconnected,
then cause page fault and make system hang.

Check PCI state to remove device safely.

Trace:
BUG: unable to handle page fault for address: 000000000000b604
Oops: 0000 [#1] SMP NOPTI
RIP: 0010:igc_rd32+0x1c/0x90 [igc]
Call Trace:
igc_ptp_suspend+0x6c/0xa0 [igc]
igc_ptp_stop+0x12/0x50 [igc]
igc_remove+0x7f/0x1c0 [igc]
pci_device_remove+0x3e/0xb0
__device_release_driver+0x181/0x240

Fixes: 13b5b7fd6a4a ("igc: Add support for Tx/Rx rings")
Fixes: b03c49cde61f ("igc: Save PTP time before a reset")
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: usb: pegasus: fixes of set_register(s) return value evaluation;

[ Upstream commit ffc9c3ebb4af870a121da99826e9ccb63dc8b3d7 ]

- restore the behavior in enable_net_traffic() to avoid regressions - Jakub
    Kicinski;
  - hurried up and removed redundant assignment in pegasus_open() before yet
    another checker complains;

Fixes: 8a160e2e9aeb ("net: usb: pegasus: Check the return value of get_geristers() and friends;")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Petko Manolov <petko.manolov@konsulko.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: do not abort devlink info if board identifier can't be found

[ Upstream commit a8f89fa27773a8c96fd09fb4e2f4892d794f21f6 ]

The devlink dev info command reports version information about the
device and firmware running on the board. This includes the "board.id"
field which is supposed to represent an identifier of the board design.
The ice driver uses the Product Board Assembly identifier for this.

In some cases, the PBA is not present in the NVM. If this happens,
devlink dev info will fail with an error. Instead, modify the
ice_info_pba function to just exit without filling in the context
buffer. This will cause the board.id field to be skipped. Log a dev_dbg
message in case someone wants to confirm why board.id is not showing up
for them.

Fixes: e961b679fb0b ("ice: add board identifier info to devlink .info_get")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20210819223451.245613-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/bnxt_re: Remove unpaired rtnl unlock in bnxt_re_dev_init()

[ Upstream commit a036ad088306a88de87e973981f2b9224e466c3f ]

The fixed commit removes all rtnl_lock() and rtnl_unlock() calls in
function bnxt_re_dev_init(), but forgets to remove a rtnl_unlock() in the
error handling path of bnxt_re_register_netdev(), which may cause a
deadlock. This bug is suggested by a static analysis tool.

Fixes: c2b777a95923 ("RDMA/bnxt_re: Refactor device add/remove functionalities")
Link: https://lore.kernel.org/r/20210816085531.12167-1-dinghao.liu@zju.edu.cn
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/hfi1: Fix possible null-pointer dereference in _extend_sdma_tx_descs()

[ Upstream commit cbe71c61992c38f72c2b625b2ef25916b9f0d060 ]

kmalloc_array() is called to allocate memory for tx->descp. If it fails,
the function __sdma_txclean() is called:
  __sdma_txclean(dd, tx);

However, in the function __sdma_txclean(), tx-descp is dereferenced if
tx->num_desc is not zero:
  sdma_unmap_desc(dd, &tx->descp[0]);

To fix this possible null-pointer dereference, assign the return value of
kmalloc_array() to a local variable descp, and then assign it to tx->descp
if it is not NULL. Otherwise, go to enomem.

Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20210806133029.194964-1-islituo@gmail.com
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/bnxt_re: Add missing spin lock initialization

[ Upstream commit 17f2569dce1848080825b8336e6b7c6900193b44 ]

Add the missing initialization of srq lock.

Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Link: https://lore.kernel.org/r/1629343553-5843-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: core: Fix hang of freezing queue between blocking and running device

commit 02c6dcd543f8f051973ee18bfbc4dc3bd595c558 upstream.

We found a hang, the steps to reproduce  are as follows:

  1. blocking device via scsi_device_set_state()

  2. dd if=/dev/sda of=/mnt/t.log bs=1M count=10

  3. echo none > /sys/block/sda/queue/scheduler

  4. echo "running" >/sys/block/sda/device/state

Step 3 and 4 should complete after step 4, but they hang.

  CPU#0               CPU#1                CPU#2
  ---------------     ----------------     ----------------
                                           Step 1: blocking device

                                           Step 2: dd xxxx
                                                  ^^^^^^ get request
                                                         q_usage_counter++

                      Step 3: switching scheculer
                      elv_iosched_store
                        elevator_switch
                          blk_mq_freeze_queue
                            blk_freeze_queue
                              > blk_freeze_queue_start
                                ^^^^^^ mq_freeze_depth++

                              > blk_mq_run_hw_queues
                                ^^^^^^ can't run queue when dev blocked

                              > blk_mq_freeze_queue_wait
                                ^^^^^^ Hang here!!!
                                       wait q_usage_counter==0

  Step 4: running device
  store_state_field
    scsi_rescan_device
      scsi_attach_vpd
        scsi_vpd_inquiry
          __scsi_execute
            blk_get_request
              blk_mq_alloc_request
                blk_queue_enter
                ^^^^^^ Hang here!!!
                       wait mq_freeze_depth==0

    blk_mq_run_hw_queues
    ^^^^^^ dispatch IO, q_usage_counter will reduce to zero

                            blk_mq_unfreeze_queue
                            ^^^^^ mq_freeze_depth--

To fix this, we need to run queue before rescanning device when the device
state changes to SDEV_RUNNING.

Link: https://lore.kernel.org/r/20210824025921.3277629-1-lijinlin3@huawei.com
Fixes: f0f82e2476f6 ("scsi: core: Fix capacity set to zero after offlinining device")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Li Jinlin <lijinlin3@huawei.com>
Signed-off-by: Qiu Laibin <qiulaibin@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Stop EP0 transfers during pullup disable

commit 4a1e25c0a029b97ea4a3d423a6392bfacc3b2e39 upstream.

During a USB cable disconnect, or soft disconnect scenario, a pending
SETUP transaction may not be completed, leading to the following
error:

    dwc3 a600000.dwc3: timed out waiting for SETUP phase

If this occurs, then the entire pullup disable routine is skipped and
proper cleanup and halting of the controller does not complete.

Instead of returning an error (which is ignored from the UDC
perspective), allow the pullup disable routine to continue, which
will also handle disabling of EP0/1.  This will end any active
transfers as well.  Ensure to clear any delayed_status also, as the
timeout could happen within the STATUS stage.

Fixes: bb0147364850 ("usb: dwc3: gadget: don't clear RUN/STOP when it's invalid to do so")
Cc: <stable@vger.kernel.org>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/20210825042855.7977-1-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Fix dwc3_calc_trbs_left()

commit 51f1954ad853d01ba4dc2b35dee14d8490ee05a1 upstream.

We can't depend on the TRB's HWO bit to determine if the TRB ring is
"full". A TRB is only available when the driver had processed it, not
when the controller consumed and relinquished the TRB's ownership to the
driver. Otherwise, the driver may overwrite unprocessed TRBs. This can
happen when many transfer events accumulate and the system is slow to
process them and/or when there are too many small requests.

If a request is in the started_list, that means there is one or more
unprocessed TRBs remained. Check this instead of the TRB's HWO bit
whether the TRB ring is full.

Fixes: c4233573f6ee ("usb: dwc3: gadget: prepare TRBs on update transfers too")
Cc: <stable@vger.kernel.org>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/e91e975affb0d0d02770686afc3a5b9eb84409f6.1629335416.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: renesas-xhci: Prefer firmware loading on unknown ROM state

commit c82cacd2f1e622a461a77d275a75d7e19e7635a3 upstream.

The recent attempt to handle an unknown ROM state in the commit
d143825baf15 ("usb: renesas-xhci: Fix handling of unknown ROM state")
resulted in a regression and reverted later by the commit 44cf53602f5a
("Revert "usb: renesas-xhci: Fix handling of unknown ROM state"").
The problem of the former fix was that it treated the failure of
firmware loading as a fatal error.  Since the firmware files aren't
included in the standard linux-firmware tree, most users don't have
them, hence they got the non-working system after that.  The revert
fixed the regression, but also it didn't make the firmware loading
triggered even on the devices that do need it.  So we need still a fix
for them.

This is another attempt to handle the unknown ROM state.  Like the
previous fix, this also tries to load the firmware when ROM shows
unknown state.  In this patch, however, the failure of a firmware
loading (such as a missing firmware file) isn't handled as a fatal
error any longer when ROM has been already detected, but it falls back
to the ROM mode like before.  The error is returned only when no ROM
is detected and the firmware loading failed.

Along with it, for simplifying the code flow, the detection and the
check of ROM is factored out from renesas_fw_check_running() and done
in the caller side, renesas_xhci_check_request_fw().  It avoids the
redundant ROM checks.

The patch was tested on Lenovo Thinkpad T14 gen (BIOS 1.34).  Also it
was confirmed that no regression is seen on another Thinkpad T14
machine that has worked without the patch, too.

Fixes: 44cf53602f5a ("Revert "usb: renesas-xhci: Fix handling of unknown ROM state"")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1189207
Link: https://lore.kernel.org/r/20210826124127.14789-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add new VID/PID to support Fibocom FG150

commit 2829a4e3cf3a6ac2fa3cdb681b37574630fb9c1a upstream.

Fibocom FG150 is a 5G module based on Qualcomm SDX55 platform,
support Sub-6G band.

Here are the outputs of lsusb -v and usb-devices:

> T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
> D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
> P:  Vendor=2cb7 ProdID=010b Rev=04.14
> S:  Manufacturer=Fibocom
> S:  Product=Fibocom Modem_SN:XXXXXXXX
> S:  SerialNumber=XXXXXXXX
> C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
> I:  If#=0x0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
> I:  If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
> I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
> I:  If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)

> Bus 002 Device 002: ID 2cb7:010b Fibocom Fibocom Modem_SN:XXXXXXXX
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               3.20
>   bDeviceClass            0
>   bDeviceSubClass         0
>   bDeviceProtocol         0
>   bMaxPacketSize0         9
>   idVendor           0x2cb7 Fibocom
>   idProduct          0x010b
>   bcdDevice            4.14
>   iManufacturer           1 Fibocom
>   iProduct                2 Fibocom Modem_SN:XXXXXXXX
>   iSerial                 3 XXXXXXXX
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength       0x00e6
>     bNumInterfaces          5
>     bConfigurationValue     1
>     iConfiguration          4 RNDIS_DUN_DIAG_ADB
>     bmAttributes         0xa0
>       (Bus Powered)
>       Remote Wakeup
>     MaxPower              896mA
>     Interface Association:
>       bLength                 8
>       bDescriptorType        11
>       bFirstInterface         0
>       bInterfaceCount         2
>       bFunctionClass        239 Miscellaneous Device
>       bFunctionSubClass       4
>       bFunctionProtocol       1
>       iFunction               7 RNDIS
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           1
>       bInterfaceClass       239 Miscellaneous Device
>       bInterfaceSubClass      4
>       bInterfaceProtocol      1
>       iInterface              0
>       ** UNRECOGNIZED:  05 24 00 10 01
>       ** UNRECOGNIZED:  05 24 01 00 01
>       ** UNRECOGNIZED:  04 24 02 00
>       ** UNRECOGNIZED:  05 24 06 00 01
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x81  EP 1 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0008  1x 8 bytes
>         bInterval               9
>         bMaxBurst               0
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        1
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass        10 CDC Data
>       bInterfaceSubClass      0
>       bInterfaceProtocol      0
>       iInterface              0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x8e  EP 14 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               6
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x0f  EP 15 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               6
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        2
>       bAlternateSetting       0
>       bNumEndpoints           3
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass      0
>       bInterfaceProtocol      0
>       iInterface              0
>       ** UNRECOGNIZED:  05 24 00 10 01
>       ** UNRECOGNIZED:  05 24 01 00 00
>       ** UNRECOGNIZED:  04 24 02 02
>       ** UNRECOGNIZED:  05 24 06 00 00
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x83  EP 3 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x000a  1x 10 bytes
>         bInterval               9
>         bMaxBurst               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x82  EP 2 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x01  EP 1 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        3
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass    255 Vendor Specific Subclass
>       bInterfaceProtocol     48
>       iInterface              0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x84  EP 4 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x02  EP 2 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        4
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass     66
>       bInterfaceProtocol      1
>       iInterface              0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x03  EP 3 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x85  EP 5 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
> Binary Object Store Descriptor:
>   bLength                 5
>   bDescriptorType        15
>   wTotalLength       0x0016
>   bNumDeviceCaps          2
>   USB 2.0 Extension Device Capability:
>     bLength                 7
>     bDescriptorType        16
>     bDevCapabilityType      2
>     bmAttributes   0x00000006
>       BESL Link Power Management (LPM) Supported
>   SuperSpeed USB Device Capability:
>     bLength                10
>     bDescriptorType        16
>     bDevCapabilityType      3
>     bmAttributes         0x00
>     wSpeedsSupported   0x000f
>       Device can operate at Low Speed (1Mbps)
>       Device can operate at Full Speed (12Mbps)
>       Device can operate at High Speed (480Mbps)
>       Device can operate at SuperSpeed (5Gbps)
>     bFunctionalitySupport   1
>       Lowest fully-functional device speed is Full Speed (12Mbps)
>     bU1DevExitLat           1 micro seconds
>     bU2DevExitLat         500 micro seconds
> Device Status:     0x0000
>   (Bus Powered)

Signed-off-by: Zhengjun Zhang <zhangzhengjun@aicrobo.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "USB: serial: ch341: fix character loss at high transfer rates"

commit df7b16d1c00ecb3da3a30c999cdb39f273c99a2f upstream.

This reverts commit 3c18e9baee0ef97510dcda78c82285f52626764b.

These devices do not appear to send a zero-length packet when the
transfer size is a multiple of the bulk-endpoint max-packet size. This
means that incoming data may not be processed by the driver until a
short packet is received or the receive buffer is full.

Revert back to using endpoint-sized receive buffers to avoid stalled
reads.

Reported-by: Paul Größel <pb.g@gmx.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214131
Fixes: 3c18e9baee0e ("USB: serial: ch341: fix character loss at high transfer rates")
Cc: stable@vger.kernel.org
Cc: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20210824121926.19311-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Cancel delayed work when GFXOFF is disabled

commit 32bc8f8373d2d6a681c96e4b25dca60d4d1c6016 upstream.

schedule_delayed_work does not push back the work if it was already
scheduled before, so amdgpu_device_delay_enable_gfx_off ran ~100 ms
after the first time GFXOFF was disabled and re-enabled, even if GFXOFF
was disabled and re-enabled again during those 100 ms.

This resulted in frame drops / stutter with the upcoming mutter 41
release on Navi 14, due to constantly enabling GFXOFF in the HW and
disabling it again (for getting the GPU clock counter).

To fix this, call cancel_delayed_work_sync when the disable count
transitions from 0 to 1, and only schedule the delayed work on the
reverse transition, not if the disable count was already 0. This makes
sure the delayed work doesn't run at unexpected times, and allows it to
be lock-free.

v2:
* Use cancel_delayed_work_sync & mutex_trylock instead of
  mod_delayed_work.
v3:
* Make amdgpu_device_delay_enable_gfx_off lock-free (Christian König)
v4:
* Fix race condition between amdgpu_gfx_off_ctrl incrementing
  adev->gfx.gfx_off_req_count and amdgpu_device_delay_enable_gfx_off
  checking for it to be 0 (Evan Quan)

Cc: stable@vger.kernel.org
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> # v3
Acked-by: Christian König <christian.koenig@amd.com> # v3
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "btrfs: compression: don't try to compress if we don't have enough pages"

commit 4e9655763b82a91e4c341835bb504a2b1590f984 upstream.

This reverts commit f2165627319ffd33a6217275e5690b1ab5c45763.

[BUG]
It's no longer possible to create compressed inline extent after commit
f2165627319f ("btrfs: compression: don't try to compress if we don't
have enough pages").

[CAUSE]
For compression code, there are several possible reasons we have a range
that needs to be compressed while it's no more than one page.

- Compressed inline write
  The data is always smaller than one sector and the test lacks the
  condition to properly recognize a non-inline extent.

- Compressed subpage write
  For the incoming subpage compressed write support, we require page
  alignment of the delalloc range.
  And for 64K page size, we can compress just one page into smaller
  sectors.

For those reasons, the requirement for the data to be more than one page
is not correct, and is already causing regression for compressed inline
data writeback.  The idea of skipping one page to avoid wasting CPU time
could be revisited in the future.

[FIX]
Fix it by reverting the offending commit.

Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Link: https://lore.kernel.org/linux-btrfs/afa2742.c084f5d6.17b6b08dffc@tnonline.net
Fixes: f2165627319f ("btrfs: compression: don't try to compress if we don't have enough pages")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Ensure the value of FP registers in the core dump file is up to date

commit 379eb01c21795edb4ca8d342503bd2183a19ec3a upstream.

The value of FP registers in the core dump file comes from the
thread.fstate. However, kernel saves the FP registers to the thread.fstate
only before scheduling out the process. If no process switch happens
during the exception handling process, kernel will not have a chance to
save the latest value of FP registers to thread.fstate. It will cause the
value of FP registers in the core dump file may be incorrect. To solve this
problem, this patch force lets kernel save the FP register into the
thread.fstate if the target task_struct equals the current.

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Fixes: b8c8a9590e4f ("RISC-V: Add FP register ptrace support for gdb.")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>