Stephen Boyd [Fri, 30 Aug 2019 19:51:42 +0000 (12:51 -0700)]
clk: qcom: gcc-sdm845: Use floor ops for sdcc clks
[ Upstream commit
5e4b7e82d497580bc430576c4c9bce157dd72512 ]
Some MMC cards fail to enumerate properly when inserted into an MMC slot
on sdm845 devices. This is because the clk ops for qcom clks round the
frequency up to the nearest rate instead of down to the nearest rate.
For example, the MMC driver requests a frequency of 52MHz from
clk_set_rate() but the qcom implementation for these clks rounds 52MHz
up to the next supported frequency of 100MHz. The MMC driver could be
modified to request clk rate ranges but for now we can fix this in the
clk driver by changing the rounding policy for this clk to be round down
instead of round up.
Fixes:
06391eddb60a ("clk: qcom: Add Global Clock controller (GCC) driver for SDM845")
Reported-by: Douglas Anderson <dianders@chromium.org>
Cc: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lkml.kernel.org/r/20190830195142.103564-1-swboyd@chromium.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Deepa Dinamani [Sun, 23 Jun 2019 23:00:01 +0000 (16:00 -0700)]
pstore: fs superblock limits
[ Upstream commit
83b8a3fbe3aa82ac3c253b698ae6a9be2dbdd5e0 ]
Leaving granularity at 1ns because it is dependent on the specific
attached backing pstore module. ramoops has microsecond resolution.
Fix the readback of ramoops fractional timestamp microseconds,
which has incorrectly been reporting the value as nanoseconds.
Fixes:
3f8f80f0cfeb ("pstore/ram: Read and write to the 'compressed' flag of pstore").
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Jeff Layton <jlayton@kernel.org>
Cc: anton@enomsg.org
Cc: ccross@android.com
Cc: keescook@chromium.org
Cc: tony.luck@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicholas Piggin [Fri, 2 Aug 2019 10:56:32 +0000 (20:56 +1000)]
powerpc/64s/exception: machine check use correct cfar for late handler
[ Upstream commit
0b66370c61fcf5fcc1d6901013e110284da6e2bb ]
Bare metal machine checks run an "early" handler in real mode before
running the main handler which reports the event.
The main handler runs exactly as a normal interrupt handler, after the
"windup" which sets registers back as they were at interrupt entry.
CFAR does not get restored by the windup code, so that will be wrong
when the handler is run.
Restore the CFAR to the saved value before running the late handler.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802105709.27696-8-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jean Delvare [Wed, 28 Aug 2019 15:05:57 +0000 (17:05 +0200)]
drm/amdgpu/si: fix ASIC tests
[ Upstream commit
77efe48a729588527afb4d5811b9e0acb29f5e51 ]
Comparing adev->family with CHIP constants is not correct.
adev->family can only be compared with AMDGPU_FAMILY constants and
adev->asic_type is the struct member to compare with CHIP constants.
They are separate identification spaces.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes:
62a37553414a ("drm/amdgpu: add si implementation v10")
Cc: Ken Wang <Qingqing.Wang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Charlene Liu [Fri, 2 Aug 2019 18:49:58 +0000 (14:49 -0400)]
drm/amd/display: support spdif
[ Upstream commit
b5a41620bb88efb9fb31a4fa5e652e3d5bead7d4 ]
[Description]
port spdif fix to staging:
spdif hardwired to afmt inst 1.
spdif func pointer
spdif resource allocation (reserve last audio endpoint for spdif only)
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Fri, 9 Aug 2019 13:44:51 +0000 (15:44 +0200)]
clk: renesas: cpg-mssr: Set GENPD_FLAG_ALWAYS_ON for clock domain
[ Upstream commit
f787216f33ce5b5a2567766398f44ab62157114c ]
The CPG/MSSR Clock Domain driver does not implement the
generic_pm_domain.power_{on,off}() callbacks, as the domain itself
cannot be powered down. Hence the domain should be marked as always-on
by setting the GENPD_FLAG_ALWAYS_ON flag, to prevent the core PM Domain
code from considering it for power-off, and doing unnessary processing.
Note that this only affects RZ/A2 SoCs. On R-Car Gen2 and Gen3 SoCs,
the R-Car SYSC driver handles Clock Domain creation, and offloads only
device attachment/detachment to the CPG/MSSR driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Fri, 9 Aug 2019 13:38:34 +0000 (15:38 +0200)]
clk: renesas: mstp: Set GENPD_FLAG_ALWAYS_ON for clock domain
[ Upstream commit
a459a184c978ca9ad538aab93aafdde873953f30 ]
The CPG/MSTP Clock Domain driver does not implement the
generic_pm_domain.power_{on,off}() callbacks, as the domain itself
cannot be powered down. Hence the domain should be marked as always-on
by setting the GENPD_FLAG_ALWAYS_ON flag, to prevent the core PM Domain
code from considering it for power-off, and doing unnessary processing.
This also gets rid of a boot warning when the Clock Domain contains an
IRQ-safe device, e.g. on RZ/A1:
sh_mtu2
fcff0000.timer: PM domain cpg_clocks will not be powered off
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Drake [Wed, 14 Aug 2019 09:05:40 +0000 (17:05 +0800)]
pinctrl: amd: disable spurious-firing GPIO IRQs
[ Upstream commit
d21b8adbd475dba19ac2086d3306327b4a297418 ]
When cold-booting Asus X434DA, GPIO 7 is found to be already configured
as an interrupt, and the GPIO level is found to be in a state that
causes the interrupt to fire.
As soon as pinctrl-amd probes, this interrupt fires and invokes
amd_gpio_irq_handler(). The IRQ is acked, but no GPIO-IRQ handler was
invoked, so the GPIO level being unchanged just causes another interrupt
to fire again immediately after.
This results in an interrupt storm causing this platform to hang
during boot, right after pinctrl-amd is probed.
Detect this situation and disable the GPIO interrupt when this happens.
This enables the affected platform to boot as normal. GPIO 7 actually is
the I2C touchpad interrupt line, and later on, i2c-multitouch loads and
re-enables this interrupt when it is ready to handle it.
Instead of this approach, I considered disabling all GPIO interrupts at
probe time, however that seems a little risky, and I also confirmed that
Windows does not seem to have this behaviour: the same 41 GPIO IRQs are
enabled under both Linux and Windows, which is a far larger collection
than the GPIOs referenced by the DSDT on this platform.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Link: https://lore.kernel.org/r/20190814090540.7152-1-drake@endlessm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Menzynski [Fri, 2 Aug 2019 09:21:00 +0000 (11:21 +0200)]
drm/nouveau/volt: Fix for some cards having 0 maximum voltage
[ Upstream commit
a1af2afbd244089560794c260b2d4326a86e39b6 ]
Some, mostly Fermi, vbioses appear to have zero max voltage. That causes Nouveau to not parse voltage entries, thus users not being able to set higher clocks.
When changing this value Nvidia driver still appeared to ignore it, and I wasn't able to find out why, thus the code is ignoring the value if it is zero.
CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Mark Menzynski <mmenzyns@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hexin [Thu, 22 Aug 2019 03:35:19 +0000 (11:35 +0800)]
vfio_pci: Restore original state on release
[ Upstream commit
92c8026854c25093946e0d7fe536fd9eac440f06 ]
vfio_pci_enable() saves the device's initial configuration information
with the intent that it is restored in vfio_pci_disable(). However,
the commit referenced in Fixes: below replaced the call to
__pci_reset_function_locked(), which is not wrapped in a state save
and restore, with pci_try_reset_function(), which overwrites the
restored device state with the current state before applying it to the
device. Reinstate use of __pci_reset_function_locked() to return to
the desired behavior.
Fixes:
890ed578df82 ("vfio-pci: Use pci "try" reset interface")
Signed-off-by: hexin <hexin15@baidu.com>
Signed-off-by: Liu Qi <liuqi16@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sam Bobroff [Fri, 16 Aug 2019 04:48:06 +0000 (14:48 +1000)]
powerpc/eeh: Clear stale EEH_DEV_NO_HANDLER flag
[ Upstream commit
aa06e3d60e245284d1e55497eb3108828092818d ]
The EEH_DEV_NO_HANDLER flag is used by the EEH system to prevent the
use of driver callbacks in drivers that have been bound part way
through the recovery process. This is necessary to prevent later stage
handlers from being called when the earlier stage handlers haven't,
which can be confusing for drivers.
However, the flag is set for all devices that are added after boot
time and only cleared at the end of the EEH recovery process. This
results in hot plugged devices erroneously having the flag set during
the first recovery after they are added (causing their driver's
handlers to be incorrectly ignored).
To remedy this, clear the flag at the beginning of recovery
processing. The flag is still cleared at the end of recovery
processing, although it is no longer really necessary.
Also clear the flag during eeh_handle_special_event(), for the same
reasons.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b8ca5629d27de74c957d4f4b250177d1b6fc4bbd.1565930772.git.sbobroff@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sowjanya Komatineni [Fri, 16 Aug 2019 19:41:46 +0000 (12:41 -0700)]
pinctrl: tegra: Fix write barrier placement in pmx_writel
[ Upstream commit
c2cf351eba2ff6002ce8eb178452219d2521e38e ]
pmx_writel uses writel which inserts write barrier before the
register write.
This patch has fix to replace writel with writel_relaxed followed
by a readback and memory barrier to ensure write operation is
completed for successful pinctrl change.
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1565984527-5272-2-git-send-email-skomatineni@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Lynch [Fri, 2 Aug 2019 19:29:26 +0000 (14:29 -0500)]
powerpc/pseries/mobility: use cond_resched when updating device tree
[ Upstream commit
ccfb5bd71d3d1228090a8633800ae7cdf42a94ac ]
After a partition migration, pseries_devicetree_update() processes
changes to the device tree communicated from the platform to
Linux. This is a relatively heavyweight operation, with multiple
device tree searches, memory allocations, and conversations with
partition firmware.
There's a few levels of nested loops which are bounded only by
decisions made by the platform, outside of Linux's control, and indeed
we have seen RCU stalls on large systems while executing this call
graph. Use cond_resched() in these loops so that the cpu is yielded
when needed.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802192926.19277-4-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Wed, 14 Aug 2019 09:25:52 +0000 (09:25 +0000)]
powerpc/futex: Fix warning: 'oldval' may be used uninitialized in this function
[ Upstream commit
38a0d0cdb46d3f91534e5b9839ec2d67be14c59d ]
We see warnings such as:
kernel/futex.c: In function 'do_futex':
kernel/futex.c:1676:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized]
return oldval == cmparg;
^
kernel/futex.c:1651:6: note: 'oldval' was declared here
int oldval, ret;
^
This is because arch_futex_atomic_op_inuser() only sets *oval if ret
is 0 and GCC doesn't see that it will only use it when ret is 0.
Anyway, the non-zero ret path is an error path that won't suffer from
setting *oval, and as *oval is a local var in futex_atomic_op_inuser()
it will have no impact.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: reword change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/86b72f0c134367b214910b27b9a6dd3321af93bb.1565774657.git.christophe.leroy@c-s.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Lynch [Fri, 2 Aug 2019 19:29:24 +0000 (14:29 -0500)]
powerpc/rtas: use device model APIs and serialization during LPM
[ Upstream commit
a6717c01ddc259f6f73364779df058e2c67309f8 ]
The LPAR migration implementation and userspace-initiated cpu hotplug
can interleave their executions like so:
1. Set cpu 7 offline via sysfs.
2. Begin a partition migration, whose implementation requires the OS
to ensure all present cpus are online; cpu 7 is onlined:
rtas_ibm_suspend_me -> rtas_online_cpus_mask -> cpu_up
This sets cpu 7 online in all respects except for the cpu's
corresponding struct device; dev->offline remains true.
3. Set cpu 7 online via sysfs. _cpu_up() determines that cpu 7 is
already online and returns success. The driver core (device_online)
sets dev->offline = false.
4. The migration completes and restores cpu 7 to offline state:
rtas_ibm_suspend_me -> rtas_offline_cpus_mask -> cpu_down
This leaves cpu7 in a state where the driver core considers the cpu
device online, but in all other respects it is offline and
unused. Attempts to online the cpu via sysfs appear to succeed but the
driver core actually does not pass the request to the lower-level
cpuhp support code. This makes the cpu unusable until the cpu device
is manually set offline and then online again via sysfs.
Instead of directly calling cpu_up/cpu_down, the migration code should
use the higher-level device core APIs to maintain consistent state and
serialize operations.
Fixes:
120496ac2d2d ("powerpc: Bring all threads online prior to migration/hibernation")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802192926.19277-2-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cédric Le Goater [Wed, 14 Aug 2019 15:47:52 +0000 (17:47 +0200)]
powerpc/xmon: Check for HV mode when dumping XIVE info from OPAL
[ Upstream commit
c3e0dbd7f780a58c4695f1cd8fc8afde80376737 ]
Currently, the xmon 'dx' command calls OPAL to dump the XIVE state in
the OPAL logs and also outputs some of the fields of the internal XIVE
structures in Linux. The OPAL calls can only be done on baremetal
(PowerNV) and they crash a pseries machine. Fix by checking the
hypervisor feature of the CPU.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190814154754.23682-2-clg@kaod.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stephen Boyd [Thu, 15 Aug 2019 16:00:18 +0000 (09:00 -0700)]
clk: zx296718: Don't reference clk_init_data after registration
[ Upstream commit
1a4549c150e27dbc3aea762e879a88209df6d1a5 ]
A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190815160020.183334-3-sboyd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stephen Boyd [Wed, 31 Jul 2019 19:35:15 +0000 (12:35 -0700)]
clk: sprd: Don't reference clk_init_data after registration
[ Upstream commit
f6c90df8e7e33c3dc33d4d7471bc42c232b0510e ]
A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.
Cc: Chunyan Zhang <zhang.chunyan@linaro.org>
Cc: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190731193517.237136-8-sboyd@kernel.org
Acked-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stephen Boyd [Wed, 31 Jul 2019 19:35:13 +0000 (12:35 -0700)]
clk: sirf: Don't reference clk_init_data after registration
[ Upstream commit
af55dadfbce35b4f4c6247244ce3e44b2e242b84 ]
A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.
Cc: Guo Zeng <Guo.Zeng@csr.com>
Cc: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190731193517.237136-6-sboyd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stephen Boyd [Wed, 31 Jul 2019 19:35:09 +0000 (12:35 -0700)]
clk: actions: Don't reference clk_init_data after registration
[ Upstream commit
cf9ec1fc6d7cceb73e7f1efd079d2eae173fdf57 ]
A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190731193517.237136-2-sboyd@kernel.org
[sboyd@kernel.org: Move name to after checking for error or NULL hw]
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexey Kardashevskiy [Thu, 18 Jul 2019 05:11:38 +0000 (15:11 +1000)]
powerpc/powernv/ioda2: Allocate TCE table levels on demand for default DMA window
[ Upstream commit
c37c792dec0929dbb6360a609fb00fa20bb16fc2 ]
We allocate only the first level of multilevel TCE tables for KVM
already (alloc_userspace_copy==true), and the rest is allocated on demand.
This is not enabled though for bare metal.
This removes the KVM limitation (implicit, via the alloc_userspace_copy
parameter) and always allocates just the first level. The on-demand
allocation of missing levels is already implemented.
As from now on DMA map might happen with disabled interrupts, this
allocates TCEs with GFP_ATOMIC; otherwise lockdep reports errors 1].
In practice just a single page is allocated there so chances for failure
are quite low.
To save time when creating a new clean table, this skips non-allocated
indirect TCE entries in pnv_tce_free just like we already do in
the VFIO IOMMU TCE driver.
This changes the default level number from 1 to 2 to reduce the amount
of memory required for the default 32bit DMA window at the boot time.
The default window size is up to 2GB which requires 4MB of TCEs which is
unlikely to be used entirely or at all as most devices these days are
64bit capable so by switching to 2 levels by default we save 4032KB of
RAM per a device.
While at this, add __GFP_NOWARN to alloc_pages_node() as the userspace
can trigger this path via VFIO, see the failure and try creating a table
again with different parameters which might succeed.
[1]:
===
BUG: sleeping function called from invalid context at mm/page_alloc.c:4596
in_atomic(): 1, irqs_disabled(): 1, pid: 1038, name: scsi_eh_1
2 locks held by scsi_eh_1/1038:
#0:
000000005efd659a (&host->eh_mutex){+.+.}, at: ata_eh_acquire+0x34/0x80
#1:
0000000006cf56a6 (&(&host->lock)->rlock){....}, at: ata_exec_internal_sg+0xb0/0x5c0
irq event stamp: 500
hardirqs last enabled at (499): [<
c000000000cb8a74>] _raw_spin_unlock_irqrestore+0x94/0xd0
hardirqs last disabled at (500): [<
c000000000cb85c4>] _raw_spin_lock_irqsave+0x44/0x120
softirqs last enabled at (0): [<
c000000000101120>] copy_process.isra.4.part.5+0x640/0x1a80
softirqs last disabled at (0): [<
0000000000000000>] 0x0
CPU: 73 PID: 1038 Comm: scsi_eh_1 Not tainted 5.2.0-rc6-le_nv2_aikATfstn1-p1 #634
Call Trace:
[
c000003d064cef50] [
c000000000c8e6c4] dump_stack+0xe8/0x164 (unreliable)
[
c000003d064cefa0] [
c00000000014ed78] ___might_sleep+0x2f8/0x310
[
c000003d064cf020] [
c0000000003ca084] __alloc_pages_nodemask+0x2a4/0x1560
[
c000003d064cf220] [
c0000000000c2530] pnv_alloc_tce_level.isra.0+0x90/0x130
[
c000003d064cf290] [
c0000000000c2888] pnv_tce+0x128/0x3b0
[
c000003d064cf360] [
c0000000000c2c00] pnv_tce_build+0xb0/0xf0
[
c000003d064cf3c0] [
c0000000000bbd9c] pnv_ioda2_tce_build+0x3c/0xb0
[
c000003d064cf400] [
c00000000004cfe0] ppc_iommu_map_sg+0x210/0x550
[
c000003d064cf510] [
c00000000004b7a4] dma_iommu_map_sg+0x74/0xb0
[
c000003d064cf530] [
c000000000863944] ata_qc_issue+0x134/0x470
[
c000003d064cf5b0] [
c000000000863ec4] ata_exec_internal_sg+0x244/0x5c0
[
c000003d064cf700] [
c0000000008642d0] ata_exec_internal+0x90/0xe0
[
c000003d064cf780] [
c0000000008650ac] ata_dev_read_id+0x2ec/0x640
[
c000003d064cf8d0] [
c000000000878e28] ata_eh_recover+0x948/0x16d0
[
c000003d064cfa10] [
c00000000087d760] sata_pmp_error_handler+0x480/0xbf0
[
c000003d064cfbc0] [
c000000000884624] ahci_error_handler+0x74/0xe0
[
c000003d064cfbf0] [
c000000000879fa8] ata_scsi_port_error_handler+0x2d8/0x7c0
[
c000003d064cfca0] [
c00000000087a544] ata_scsi_error+0xb4/0x100
[
c000003d064cfd00] [
c000000000802450] scsi_error_handler+0x120/0x510
[
c000003d064cfdb0] [
c000000000140c48] kthread+0x1b8/0x1c0
[
c000003d064cfe20] [
c00000000000bd8c] ret_from_kernel_thread+0x5c/0x70
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
irq event stamp: 2305
========================================================
hardirqs last enabled at (2305): [<
c00000000000e4c8>] fast_exc_return_irq+0x28/0x34
hardirqs last disabled at (2303): [<
c000000000cb9fd0>] __do_softirq+0x4a0/0x654
WARNING: possible irq lock inversion dependency detected
5.2.0-rc6-le_nv2_aikATfstn1-p1 #634 Tainted: G W
softirqs last enabled at (2304): [<
c000000000cba054>] __do_softirq+0x524/0x654
softirqs last disabled at (2297): [<
c00000000010f278>] irq_exit+0x128/0x180
--------------------------------------------------------
swapper/0/0 just changed the state of lock:
0000000006cf56a6 (&(&host->lock)->rlock){-...}, at: ahci_single_level_irq_intr+0xac/0x120
but this lock took another, HARDIRQ-unsafe lock in the past:
(fs_reclaim){+.+.}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
local_irq_disable();
lock(&(&host->lock)->rlock);
lock(fs_reclaim);
<Interrupt>
lock(&(&host->lock)->rlock);
*** DEADLOCK ***
no locks held by swapper/0/0.
the shortest dependencies between 2nd lock and 1st lock:
-> (fs_reclaim){+.+.} ops: 167579 {
HARDIRQ-ON-W at:
lock_acquire+0xf8/0x2a0
fs_reclaim_acquire.part.23+0x44/0x60
kmem_cache_alloc_node_trace+0x80/0x590
alloc_desc+0x64/0x270
__irq_alloc_descs+0x2e4/0x3a0
irq_domain_alloc_descs+0xb0/0x150
irq_create_mapping+0x168/0x2c0
xics_smp_probe+0x2c/0x98
pnv_smp_probe+0x40/0x9c
smp_prepare_cpus+0x524/0x6c4
kernel_init_freeable+0x1b4/0x650
kernel_init+0x2c/0x148
ret_from_kernel_thread+0x5c/0x70
SOFTIRQ-ON-W at:
lock_acquire+0xf8/0x2a0
fs_reclaim_acquire.part.23+0x44/0x60
kmem_cache_alloc_node_trace+0x80/0x590
alloc_desc+0x64/0x270
__irq_alloc_descs+0x2e4/0x3a0
irq_domain_alloc_descs+0xb0/0x150
irq_create_mapping+0x168/0x2c0
xics_smp_probe+0x2c/0x98
pnv_smp_probe+0x40/0x9c
smp_prepare_cpus+0x524/0x6c4
kernel_init_freeable+0x1b4/0x650
kernel_init+0x2c/0x148
ret_from_kernel_thread+0x5c/0x70
INITIAL USE at:
lock_acquire+0xf8/0x2a0
fs_reclaim_acquire.part.23+0x44/0x60
kmem_cache_alloc_node_trace+0x80/0x590
alloc_desc+0x64/0x270
__irq_alloc_descs+0x2e4/0x3a0
irq_domain_alloc_descs+0xb0/0x150
irq_create_mapping+0x168/0x2c0
xics_smp_probe+0x2c/0x98
pnv_smp_probe+0x40/0x9c
smp_prepare_cpus+0x524/0x6c4
kernel_init_freeable+0x1b4/0x650
kernel_init+0x2c/0x148
ret_from_kernel_thread+0x5c/0x70
}
===
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190718051139.74787-4-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lewis Huang [Mon, 22 Jul 2019 19:23:32 +0000 (15:23 -0400)]
drm/amd/display: reprogram VM config when system resume
[ Upstream commit
e5382701c3520b3ed66169a6e4aa6ce5df8c56e0 ]
[Why]
The vm config will be clear to 0 when system enter S4. It will
cause hubbub didn't know how to fetch data when system resume.
The flip always pending because earliest_inuse_address and
request_address are different.
[How]
Reprogram VM config when system resume
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anthony Koo [Fri, 12 Jul 2019 14:52:54 +0000 (10:52 -0400)]
drm/amd/display: fix issue where 252-255 values are clipped
[ Upstream commit
1cbcfc975164f397b449efb17f59d81a703090db ]
[Why]
When endpoint is at the boundary of a region, such as at 2^0=1
we find that the last segment has a sharp slope and some points
are clipped at the top.
[How]
If end point is 1, which is exactly at the 2^0 region boundary, we
need to program an additional region beyond this point.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Icenowy Zheng [Sun, 28 Jul 2019 03:12:23 +0000 (11:12 +0800)]
clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocks
[ Upstream commit
720099603d1f62e37b789366d7e89824b009ca28 ]
The MMC2 clock slices are currently not defined in V3s CCU driver, which
makes MMC2 not working.
Fix this issue.
Fixes:
d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Huckleberry [Thu, 27 Jun 2019 22:06:42 +0000 (15:06 -0700)]
clk: qoriq: Fix -Wunused-const-variable
[ Upstream commit
a95fb581b144b5e73da382eaedb2e32027610597 ]
drivers/clk/clk-qoriq.c:138:38: warning: unused variable
'p5020_cmux_grp1' [-Wunused-const-variable] static const struct
clockgen_muxinfo p5020_cmux_grp1
drivers/clk/clk-qoriq.c:146:38: warning: unused variable
'p5020_cmux_grp2' [-Wunused-const-variable] static const struct
clockgen_muxinfo p5020_cmux_grp2
In the definition of the p5020 chip, the p2041 chip's info was used
instead. The p5020 and p2041 chips have different info. This is most
likely a typo.
Link: https://github.com/ClangBuiltLinux/linux/issues/525
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Link: https://lkml.kernel.org/r/20190627220642.78575-1-nhuck@google.com
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corey Minyard [Fri, 2 Aug 2019 12:31:36 +0000 (07:31 -0500)]
ipmi_si: Only schedule continuously in the thread in maintenance mode
[ Upstream commit
340ff31ab00bca5c15915e70ad9ada3030c98cf8 ]
ipmi_thread() uses back-to-back schedule() to poll for command
completion which, on some machines, can push up CPU consumption and
heavily tax the scheduler locks leading to noticeable overall
performance degradation.
This was originally added so firmware updates through IPMI would
complete in a timely manner. But we can't kill the scheduler
locks for that one use case.
Instead, only run schedule() continuously in maintenance mode,
where firmware updates should run.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Mon, 3 Jun 2019 22:11:58 +0000 (15:11 -0700)]
PCI: rpaphp: Avoid a sometimes-uninitialized warning
[ Upstream commit
0df3e42167caaf9f8c7b64de3da40a459979afe8 ]
When building with -Wsometimes-uninitialized, clang warns:
drivers/pci/hotplug/rpaphp_core.c:243:14: warning: variable 'fndit' is
used uninitialized whenever 'for' loop exits because its condition is
false [-Wsometimes-uninitialized]
for (j = 0; j < entries; j++) {
^~~~~~~~~~~
drivers/pci/hotplug/rpaphp_core.c:256:6: note: uninitialized use occurs
here
if (fndit)
^~~~~
drivers/pci/hotplug/rpaphp_core.c:243:14: note: remove the condition if
it is always true
for (j = 0; j < entries; j++) {
^~~~~~~~~~~
drivers/pci/hotplug/rpaphp_core.c:233:14: note: initialize the variable
'fndit' to silence this warning
int j, fndit;
^
= 0
fndit is only used to gate a sprintf call, which can be moved into the
loop to simplify the code and eliminate the local variable, which will
fix this warning.
Fixes:
2fcf3ae508c2 ("hotplug/drc-info: Add code to search ibm,drc-info property")
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/504
Link: https://lore.kernel.org/r/20190603221157.58502-1-natechancellor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jia-Ju Bai [Mon, 29 Jul 2019 08:36:44 +0000 (16:36 +0800)]
gpu: drm: radeon: Fix a possible null-pointer dereference in radeon_connector_set_property()
[ Upstream commit
f3eb9b8f67bc28783eddc142ad805ebdc53d6339 ]
In radeon_connector_set_property(), there is an if statement on line 743
to check whether connector->encoder is NULL:
if (connector->encoder)
When connector->encoder is NULL, it is used on line 755:
if (connector->encoder->crtc)
Thus, a possible null-pointer dereference may occur.
To fix this bug, connector->encoder is checked before being used.
This bug is found by a static analysis tool STCheck written by us.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
KyleMahlkuch [Wed, 31 Jul 2019 22:10:14 +0000 (17:10 -0500)]
drm/radeon: Fix EEH during kexec
[ Upstream commit
6f7fe9a93e6c09bf988c5059403f5f88e17e21e6 ]
During kexec some adapters hit an EEH since they are not properly
shut down in the radeon_pci_shutdown() function. Adding
radeon_suspend_kms() fixes this issue.
Signed-off-by: KyleMahlkuch <kmahlkuc@linux.vnet.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Paul [Tue, 11 Jun 2019 16:08:21 +0000 (12:08 -0400)]
drm/rockchip: Check for fast link training before enabling psr
[ Upstream commit
ad309284a52be47c8b3126c9376358bf381861bc ]
Once we start shutting off the link during PSR, we're going to want fast
training to work. If the display doesn't support fast training, don't
enable psr.
Changes in v2:
- None
Changes in v3:
- None
Changes in v4:
- None
Changes in v5:
- None
Link to v1: https://patchwork.freedesktop.org/patch/msgid/
20190228210939.83386-3-sean@poorly.run
Link to v2: https://patchwork.freedesktop.org/patch/msgid/
20190326204509.96515-2-sean@poorly.run
Link to v3: https://patchwork.freedesktop.org/patch/msgid/
20190502194956.218441-9-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/
20190508160920.144739-8-sean@poorly.run
Cc: Zain Wang <wzz@rock-chips.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-8-sean@poorly.run
Signed-off-by: Sasha Levin <sashal@kernel.org>
Navid Emamdoost [Wed, 24 Jul 2019 19:55:34 +0000 (14:55 -0500)]
drm/panel: check failure cases in the probe func
[ Upstream commit
afd6d4f5a52c16e1483328ac074abb1cde92c29f ]
The following function calls may fail and return NULL, so the null check
is added.
of_graph_get_next_endpoint
of_graph_get_remote_port_parent
of_graph_get_remote_port
Update: Thanks to Sam Ravnborg, for suggession on the use of goto to avoid
leaking endpoint.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724195534.9303-1-navid.emamdoost@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ahmad Fatoum [Fri, 12 Jul 2019 08:42:28 +0000 (10:42 +0200)]
drm/stm: attach gem fence to atomic state
[ Upstream commit
8fabc9c3109a71b3577959a05408153ae69ccd8d ]
To properly synchronize with other devices the fence from the GEM
object backing the framebuffer needs to be attached to the atomic
state, so the commit work can wait on fence signaling.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712084228.8338-1-l.stach@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marko Kohtala [Tue, 18 Jun 2019 07:41:08 +0000 (10:41 +0300)]
video: ssd1307fb: Start page range at page_offset
[ Upstream commit
dd9782834dd9dde3624ff1acea8859f3d3e792d4 ]
The page_offset was only applied to the end of the page range. This caused
the display updates to cause a scrolling effect on the display because the
amount of data written to the display did not match the range display
expected.
Fixes:
301bc0675b67 ("video: ssd1307fb: Make use of horizontal addressing mode")
Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-4-marko.kohtala@okoko.fi
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lucas Stach [Wed, 10 Jul 2019 13:07:40 +0000 (15:07 +0200)]
drm/panel: simple: fix AUO g185han01 horizontal blanking
[ Upstream commit
f8c6bfc612b56f02e1b8fae699dff12738aaf889 ]
The horizontal blanking periods are too short, as the values are
specified for a single LVDS channel. Since this panel is dual LVDS
they need to be doubled. With this change the panel reaches its
nominal vrefresh rate of 60Fps, instead of the 64Fps with the
current wrong blanking.
Philipp Zabel added:
The datasheet specifies 960 active clocks + 40/128/160 clocks blanking
on each of the two LVDS channels (min/typical/max), so doubled this is
now correct.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1562764060.23869.12.camel@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrey Smirnov [Wed, 19 Jun 2019 05:27:09 +0000 (22:27 -0700)]
drm/bridge: tc358767: Increase AUX transfer length limit
[ Upstream commit
e0655feaec62d5139b6b13a7b1bbb1ab8f1c2d83 ]
According to the datasheet tc358767 can transfer up to 16 bytes via
its AUX channel, so the artificial limit of 8 appears to be too
low. However only up to 15-bytes seem to be actually supported and
trying to use 16-byte transfers results in transfers failing
sporadically (with bogus status in case of I2C transfers), so limit it
to 15.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619052716.16831-9-andrew.smirnov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vadim Sukhomlinov [Thu, 3 Oct 2019 18:46:23 +0000 (21:46 +0300)]
tpm: Fix TPM 1.2 Shutdown sequence to prevent future TPM operations
commit
db4d8cb9c9f2af71c4d087817160d866ed572cc9 upstream
TPM 2.0 Shutdown involve sending TPM2_Shutdown to TPM chip and disabling
future TPM operations. TPM 1.2 behavior was different, future TPM
operations weren't disabled, causing rare issues. This patch ensures
that future TPM operations are disabled.
Fixes:
d1bd4a792d39 ("tpm: Issue a TPM2_Shutdown for TPM2 devices.")
Cc: stable@vger.kernel.org
Signed-off-by: Vadim Sukhomlinov <sukhomlinov@google.com>
[dianders: resolved merge conflicts with mainline]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jarkko Sakkinen [Thu, 3 Oct 2019 18:46:22 +0000 (21:46 +0300)]
tpm: use tpm_try_get_ops() in tpm-sysfs.c.
commit
2677ca98ae377517930c183248221f69f771c921 upstream
Use tpm_try_get_ops() in tpm-sysfs.c so that we can consider moving
other decorations (locking, localities, power management for example)
inside it. This direction can be of course taken only after other call
sites for tpm_transmit() have been treated in the same way.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Sat, 5 Oct 2019 11:10:13 +0000 (13:10 +0200)]
Linux 4.19.77
Kai-Heng Feng [Mon, 2 Sep 2019 08:33:42 +0000 (16:33 +0800)]
drm/amd/display: Restore backlight brightness after system resume
commit
bb264220d9316f6bd7c1fd84b8da398c93912931 upstream.
Laptops with AMD APU doesn't restore display backlight brightness after
system resume.
This issue started when DC was introduced.
Let's use BL_CORE_SUSPENDRESUME so the backlight core calls
update_status callback after system resume to restore the backlight
level.
Tested on Dell Inspiron 3180 (Stoney Ridge) and Dell Latitude 5495
(Raven Ridge).
Cc: <stable@vger.kernel.org>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yafang Shao [Mon, 23 Sep 2019 22:36:54 +0000 (15:36 -0700)]
mm/compaction.c: clear total_{migrate,free}_scanned before scanning a new zone
[ Upstream commit
a94b525241c0fff3598809131d7cfcfe1d572d8c ]
total_{migrate,free}_scanned will be added to COMPACTMIGRATE_SCANNED and
COMPACTFREE_SCANNED in compact_zone(). We should clear them before
scanning a new zone. In the proc triggered compaction, we forgot clearing
them.
[laoar.shao@gmail.com: introduce a helper compact_zone_counters_init()]
Link: http://lkml.kernel.org/r/1563869295-25748-1-git-send-email-laoar.shao@gmail.com
[akpm@linux-foundation.org: expand compact_zone_counters_init() into its single callsite, per mhocko]
[vbabka@suse.cz: squash compact_zone() list_head init as well]
Link: http://lkml.kernel.org/r/1fb6f7da-f776-9e42-22f8-bbb79b030b98@suse.cz
[akpm@linux-foundation.org: kcompactd_do_work(): avoid unnecessary initialization of cc.zone]
Link: http://lkml.kernel.org/r/1563789275-9639-1-git-send-email-laoar.shao@gmail.com
Fixes:
7f354a548d1c ("mm, compaction: add vmstats for kcompactd work")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Yafang Shao <shaoyafang@didiglobal.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Biggers [Mon, 9 Sep 2019 03:15:18 +0000 (20:15 -0700)]
fuse: fix deadlock with aio poll and fuse_iqueue::waitq.lock
[ Upstream commit
76e43c8ccaa35c30d5df853013561145a0f750a5 ]
When IOCB_CMD_POLL is used on the FUSE device, aio_poll() disables IRQs
and takes kioctx::ctx_lock, then fuse_iqueue::waitq.lock.
This may have to wait for fuse_iqueue::waitq.lock to be released by one
of many places that take it with IRQs enabled. Since the IRQ handler
may take kioctx::ctx_lock, lockdep reports that a deadlock is possible.
Fix it by protecting the state of struct fuse_iqueue with a separate
spinlock, and only accessing fuse_iqueue::waitq using the versions of
the waitqueue functions which do IRQ-safe locking internally.
Reproducer:
#include <fcntl.h>
#include <stdio.h>
#include <sys/mount.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <unistd.h>
#include <linux/aio_abi.h>
int main()
{
char opts[128];
int fd = open("/dev/fuse", O_RDWR);
aio_context_t ctx = 0;
struct iocb cb = { .aio_lio_opcode = IOCB_CMD_POLL, .aio_fildes = fd };
struct iocb *cbp = &cb;
sprintf(opts, "fd=%d,rootmode=040000,user_id=0,group_id=0", fd);
mkdir("mnt", 0700);
mount("foo", "mnt", "fuse", 0, opts);
syscall(__NR_io_setup, 1, &ctx);
syscall(__NR_io_submit, ctx, 1, &cbp);
}
Beginning of lockdep output:
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
5.3.0-rc5 #9 Not tainted
-----------------------------------------------------
syz_fuse/135 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
000000003590ceda (&fiq->waitq){+.+.}, at: spin_lock include/linux/spinlock.h:338 [inline]
000000003590ceda (&fiq->waitq){+.+.}, at: aio_poll fs/aio.c:1751 [inline]
000000003590ceda (&fiq->waitq){+.+.}, at: __io_submit_one.constprop.0+0x203/0x5b0 fs/aio.c:1825
and this task is already holding:
0000000075037284 (&(&ctx->ctx_lock)->rlock){..-.}, at: spin_lock_irq include/linux/spinlock.h:363 [inline]
0000000075037284 (&(&ctx->ctx_lock)->rlock){..-.}, at: aio_poll fs/aio.c:1749 [inline]
0000000075037284 (&(&ctx->ctx_lock)->rlock){..-.}, at: __io_submit_one.constprop.0+0x1f4/0x5b0 fs/aio.c:1825
which would create a new lock dependency:
(&(&ctx->ctx_lock)->rlock){..-.} -> (&fiq->waitq){+.+.}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(&(&ctx->ctx_lock)->rlock){..-.}
[...]
Reported-by: syzbot+af05535bb79520f95431@syzkaller.appspotmail.com
Reported-by: syzbot+d86c4426a01f60feddc7@syzkaller.appspotmail.com
Fixes:
bfe4037e722e ("aio: implement IOCB_CMD_POLL")
Cc: <stable@vger.kernel.org> # v4.19+
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Mon, 9 Sep 2019 06:30:02 +0000 (16:30 +1000)]
md/raid0: avoid RAID0 data corruption due to layout confusion.
[ Upstream commit
c84a1372df929033cb1a0441fb57bd3932f39ac9 ]
If the drives in a RAID0 are not all the same size, the array is
divided into zones.
The first zone covers all drives, to the size of the smallest.
The second zone covers all drives larger than the smallest, up to
the size of the second smallest - etc.
A change in Linux 3.14 unintentionally changed the layout for the
second and subsequent zones. All the correct data is still stored, but
each chunk may be assigned to a different device than in pre-3.14 kernels.
This can lead to data corruption.
It is not possible to determine what layout to use - it depends which
kernel the data was written by.
So we add a module parameter to allow the old (0) or new (1) layout to be
specified, and refused to assemble an affected array if that parameter is
not set.
Fixes:
20d0189b1012 ("block: Introduce new bio_split()")
cc: stable@vger.kernel.org (3.14+)
Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Shilovsky [Thu, 26 Sep 2019 19:31:20 +0000 (12:31 -0700)]
CIFS: Fix oplock handling for SMB 2.1+ protocols
commit
a016e2794fc3a245a91946038dd8f34d65e53cc3 upstream.
There may be situations when a server negotiates SMB 2.1
protocol version or higher but responds to a CREATE request
with an oplock rather than a lease.
Currently the client doesn't handle such a case correctly:
when another CREATE comes in the server sends an oplock
break to the initial CREATE and the client doesn't send
an ack back due to a wrong caching level being set (READ
instead of RWH). Missing an oplock break ack makes the
server wait until the break times out which dramatically
increases the latency of the second CREATE.
Fix this by properly detecting oplocks when using SMB 2.1
protocol version and higher.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Murphy Zhou [Sat, 21 Sep 2019 11:26:00 +0000 (19:26 +0800)]
CIFS: fix max ea value size
commit
63d37fb4ce5ae7bf1e58f906d1bf25f036fe79b2 upstream.
It should not be larger then the slab max buf size. If user
specifies a larger size, it passes this check and goes
straightly to SMB2_set_info_init performing an insecure memcpy.
Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Brandt [Thu, 26 Sep 2019 12:19:09 +0000 (07:19 -0500)]
i2c: riic: Clear NACK in tend isr
commit
a71e2ac1f32097fbb2beab098687a7a95c84543e upstream.
The NACKF flag should be cleared in INTRIICNAKI interrupt processing as
description in HW manual.
This issue shows up quickly when PREEMPT_RT is applied and a device is
probed that is not plugged in (like a touchscreen controller). The result
is endless interrupts that halt system boot.
Fixes:
310c18a41450 ("i2c: riic: add driver")
Cc: stable@vger.kernel.org
Reported-by: Chien Nguyen <chien.nguyen.eb@rvc.renesas.com>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laurent Vivier [Tue, 17 Sep 2019 09:54:50 +0000 (11:54 +0200)]
hwrng: core - don't wait on add_early_randomness()
commit
78887832e76541f77169a24ac238fccb51059b63 upstream.
add_early_randomness() is called by hwrng_register() when the
hardware is added. If this hardware and its module are present
at boot, and if there is no data available the boot hangs until
data are available and can't be interrupted.
For instance, in the case of virtio-rng, in some cases the host can be
not able to provide enough entropy for all the guests.
We can have two easy ways to reproduce the problem but they rely on
misconfiguration of the hypervisor or the egd daemon:
- if virtio-rng device is configured to connect to the egd daemon of the
host but when the virtio-rng driver asks for data the daemon is not
connected,
- if virtio-rng device is configured to connect to the egd daemon of the
host but the egd daemon doesn't provide data.
The guest kernel will hang at boot until the virtio-rng driver provides
enough data.
To avoid that, call rng_get_data() in non-blocking mode (wait=0)
from add_early_randomness().
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Fixes:
d9e797261933 ("hwrng: add randomness to system from rng...")
Cc: <stable@vger.kernel.org>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Wed, 11 Sep 2019 09:36:50 +0000 (17:36 +0800)]
quota: fix wrong condition in is_quota_modification()
commit
6565c182094f69e4ffdece337d395eb7ec760efc upstream.
Quoted from
commit
3da40c7b0898 ("ext4: only call ext4_truncate when size <= isize")
" At LSF we decided that if we truncate up from isize we shouldn't trim
fallocated blocks that were fallocated with KEEP_SIZE and are past the
new i_size. This patch fixes ext4 to do this. "
And generic/092 of fstest have covered this case for long time, however
is_quota_modification() didn't adjust based on that rule, so that in
below condition, we will lose to quota block change:
- fallocate blocks beyond EOF
- remount
- truncate(file_path, file_size)
Fix it.
Link: https://lore.kernel.org/r/20190911093650.35329-1-yuchao0@huawei.com
Fixes:
3da40c7b0898 ("ext4: only call ext4_truncate when size <= isize")
CC: stable@vger.kernel.org
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Sat, 24 Aug 2019 02:38:00 +0000 (22:38 -0400)]
ext4: fix punch hole for inline_data file systems
commit
c1e8220bd316d8ae8e524df39534b8a412a45d5e upstream.
If a program attempts to punch a hole on an inline data file, we need
to convert it to a normal file first.
This was detected using ext4/032 using the adv configuration. Simple
reproducer:
mke2fs -Fq -t ext4 -O inline_data /dev/vdc
mount /vdc
echo "" > /vdc/testfile
xfs_io -c 'truncate
33554432' /vdc/testfile
xfs_io -c 'fpunch 0 1048576' /vdc/testfile
umount /vdc
e2fsck -fy /dev/vdc
Cc: stable@vger.kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rakesh Pandit [Fri, 23 Aug 2019 02:53:46 +0000 (22:53 -0400)]
ext4: fix warning inside ext4_convert_unwritten_extents_endio
commit
e3d550c2c4f2f3dba469bc3c4b83d9332b4e99e1 upstream.
Really enable warning when CONFIG_EXT4_DEBUG is set and fix missing
first argument. This was introduced in commit
ff95ec22cd7f ("ext4:
add warning to ext4_convert_unwritten_extents_endio") and splitting
extents inside endio would trigger it.
Fixes:
ff95ec22cd7f ("ext4: add warning to ext4_convert_unwritten_extents_endio")
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuo Handa [Mon, 26 Aug 2019 13:13:25 +0000 (22:13 +0900)]
/dev/mem: Bail out upon SIGKILL.
commit
8619e5bdeee8b2c685d686281f2d2a6017c4bc15 upstream.
syzbot found that a thread can stall for minutes inside read_mem() or
write_mem() after that thread was killed by SIGKILL [1]. Reading from
iomem areas of /dev/mem can be slow, depending on the hardware.
While reading 2GB at one read() is legal, delaying termination of killed
thread for minutes is bad. Thus, allow reading/writing /dev/mem and
/dev/kmem to be preemptible and killable.
[ 1335.912419][T20577] read_mem: sz=4096 count=
2134565632
[ 1335.943194][T20577] read_mem: sz=4096 count=
2134561536
[ 1335.978280][T20577] read_mem: sz=4096 count=
2134557440
[ 1336.011147][T20577] read_mem: sz=4096 count=
2134553344
[ 1336.041897][T20577] read_mem: sz=4096 count=
2134549248
Theoretically, reading/writing /dev/mem and /dev/kmem can become
"interruptible". But this patch chose "killable". Future patch will make
them "interruptible" so that we can revert to "killable" if some program
regressed.
[1] https://syzkaller.appspot.com/bug?id=
a0e3436829698d5824231251fad9d8e998f94f5e
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot <syzbot+8ab2d0f39fb79fe6ca40@syzkaller.appspotmail.com>
Link: https://lore.kernel.org/r/1566825205-10703-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Denis Kenzior [Wed, 28 Aug 2019 21:11:10 +0000 (16:11 -0500)]
cfg80211: Purge frame registrations on iftype change
commit
c1d3ad84eae35414b6b334790048406bd6301b12 upstream.
Currently frame registrations are not purged, even when changing the
interface type. This can lead to potentially weird situations where
frames possibly not allowed on a given interface type remain registered
due to the type switching happening after registration.
The kernel currently relies on userspace apps to actually purge the
registrations themselves, this is not something that the kernel should
rely on.
Add a call to cfg80211_mlme_purge_registrations() to forcefully remove
any registrations left over prior to switching the iftype.
Cc: stable@vger.kernel.org
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Link: https://lore.kernel.org/r/20190828211110.15005-1-denkenz@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Tue, 20 Aug 2019 00:21:09 +0000 (10:21 +1000)]
md: only call set_in_sync() when it is expected to succeed.
commit
480523feae581ab714ba6610388a3b4619a2f695 upstream.
Since commit
4ad23a976413 ("MD: use per-cpu counter for
writes_pending"), set_in_sync() is substantially more expensive: it
can wait for a full RCU grace period which can be 10s of milliseconds.
So we should only call it when the cost is justified.
md_check_recovery() currently calls set_in_sync() every time it finds
anything to do (on non-external active arrays). For an array
performing resync or recovery, this will be quite often.
Each call will introduce a delay to the md thread, which can noticeable
affect IO submission latency.
In md_check_recovery() we only need to call set_in_sync() if
'safemode' was non-zero at entry, meaning that there has been not
recent IO. So we save this "safemode was nonzero" state, and only
call set_in_sync() if it was non-zero.
This measurably reduces mean and maximum IO submission latency during
resync/recovery.
Reported-and-tested-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Fixes:
4ad23a976413 ("MD: use per-cpu counter for writes_pending")
Cc: stable@vger.kernel.org (v4.12+)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Tue, 20 Aug 2019 00:21:09 +0000 (10:21 +1000)]
md: don't report active array_state until after revalidate_disk() completes.
commit
9d4b45d6af442237560d0bb5502a012baa5234b7 upstream.
Until revalidate_disk() has completed, the size of a new md array will
appear to be zero.
So we shouldn't report, through array_state, that the array is active
until that time.
udev rules check array_state to see if the array is ready. As soon as
it appear to be zero, fsck can be run. If it find the size to be
zero, it will fail.
So add a new flag to provide an interlock between do_md_run() and
array_state_show(). This flag is set while do_md_run() is active and
it prevents array_state_show() from reporting that the array is
active.
Before do_md_run() is called, ->pers will be NULL so array is
definitely not active.
After do_md_run() is called, revalidate_disk() will have run and the
array will be completely ready.
We also move various sysfs_notify*() calls out of md_run() into
do_md_run() after MD_NOT_READY is cleared. This ensure the
information is ready before the notification is sent.
Prior to v4.12, array_state_show() was called with the
mddev->reconfig_mutex held, which provided exclusion with do_md_run().
Note that MD_NOT_READY cleared twice. This is deliberate to cover
both success and error paths with minimal noise.
Fixes:
b7b17c9b67e5 ("md: remove mddev_lock() from md_attr_show()")
Cc: stable@vger.kernel.org (v4.12++)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiao Ni [Mon, 8 Jul 2019 02:14:32 +0000 (10:14 +0800)]
md/raid6: Set R5_ReadError when there is read failure on parity disk
commit
143f6e733b73051cd22dcb80951c6c929da413ce upstream.
7471fb77ce4d ("md/raid6: Fix anomily when recovering a single device in
RAID6.") avoids rereading P when it can be computed from other members.
However, this misses the chance to re-write the right data to P. This
patch sets R5_ReadError if the re-read fails.
Also, when re-read is skipped, we also missed the chance to reset
rdev->read_errors to 0. It can fail the disk when there are many read
errors on P member disk (other disks don't have read error)
V2: upper layer read request don't read parity/Q data. So there is no
need to consider such situation.
This is Reported-by: kbuild test robot <lkp@intel.com>
Fixes:
7471fb77ce4d ("md/raid6: Fix anomily when recovering a single device in RAID6.")
Cc: <stable@vger.kernel.org> #4.4+
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Tue, 24 Sep 2019 09:49:54 +0000 (10:49 +0100)]
Btrfs: fix race setting up and completing qgroup rescan workers
commit
13fc1d271a2e3ab8a02071e711add01fab9271f6 upstream.
There is a race between setting up a qgroup rescan worker and completing
a qgroup rescan worker that can lead to callers of the qgroup rescan wait
ioctl to either not wait for the rescan worker to complete or to hang
forever due to missing wake ups. The following diagram shows a sequence
of steps that illustrates the race.
CPU 1 CPU 2 CPU 3
btrfs_ioctl_quota_rescan()
btrfs_qgroup_rescan()
qgroup_rescan_init()
mutex_lock(&fs_info->qgroup_rescan_lock)
spin_lock(&fs_info->qgroup_lock)
fs_info->qgroup_flags |=
BTRFS_QGROUP_STATUS_FLAG_RESCAN
init_completion(
&fs_info->qgroup_rescan_completion)
fs_info->qgroup_rescan_running = true
mutex_unlock(&fs_info->qgroup_rescan_lock)
spin_unlock(&fs_info->qgroup_lock)
btrfs_init_work()
--> starts the worker
btrfs_qgroup_rescan_worker()
mutex_lock(&fs_info->qgroup_rescan_lock)
fs_info->qgroup_flags &=
~BTRFS_QGROUP_STATUS_FLAG_RESCAN
mutex_unlock(&fs_info->qgroup_rescan_lock)
starts transaction, updates qgroup status
item, etc
btrfs_ioctl_quota_rescan()
btrfs_qgroup_rescan()
qgroup_rescan_init()
mutex_lock(&fs_info->qgroup_rescan_lock)
spin_lock(&fs_info->qgroup_lock)
fs_info->qgroup_flags |=
BTRFS_QGROUP_STATUS_FLAG_RESCAN
init_completion(
&fs_info->qgroup_rescan_completion)
fs_info->qgroup_rescan_running = true
mutex_unlock(&fs_info->qgroup_rescan_lock)
spin_unlock(&fs_info->qgroup_lock)
btrfs_init_work()
--> starts another worker
mutex_lock(&fs_info->qgroup_rescan_lock)
fs_info->qgroup_rescan_running = false
mutex_unlock(&fs_info->qgroup_rescan_lock)
complete_all(&fs_info->qgroup_rescan_completion)
Before the rescan worker started by the task at CPU 3 completes, if
another task calls btrfs_ioctl_quota_rescan(), it will get -EINPROGRESS
because the flag BTRFS_QGROUP_STATUS_FLAG_RESCAN is set at
fs_info->qgroup_flags, which is expected and correct behaviour.
However if other task calls btrfs_ioctl_quota_rescan_wait() before the
rescan worker started by the task at CPU 3 completes, it will return
immediately without waiting for the new rescan worker to complete,
because fs_info->qgroup_rescan_running is set to false by CPU 2.
This race is making test case btrfs/171 (from fstests) to fail often:
btrfs/171 9s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/171.out.bad)
# --- tests/btrfs/171.out 2018-09-16 21:30:48.
505104287 +0100
# +++ /home/fdmanana/git/hub/xfstests/results//btrfs/171.out.bad 2019-09-19 02:01:36.
938486039 +0100
# @@ -1,2 +1,3 @@
# QA output created by 171
# +ERROR: quota rescan failed: Operation now in progress
# Silence is golden
# ...
# (Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/btrfs/171.out /home/fdmanana/git/hub/xfstests/results//btrfs/171.out.bad' to see the entire diff)
That is because the test calls the btrfs-progs commands "qgroup quota
rescan -w", "qgroup assign" and "qgroup remove" in a sequence that makes
calls to the rescan start ioctl fail with -EINPROGRESS (note the "btrfs"
commands 'qgroup assign' and 'qgroup remove' often call the rescan start
ioctl after calling the qgroup assign ioctl,
btrfs_ioctl_qgroup_assign()), since previous waits didn't actually wait
for a rescan worker to complete.
Another problem the race can cause is missing wake ups for waiters,
since the call to complete_all() happens outside a critical section and
after clearing the flag BTRFS_QGROUP_STATUS_FLAG_RESCAN. In the sequence
diagram above, if we have a waiter for the first rescan task (executed
by CPU 2), then fs_info->qgroup_rescan_completion.wait is not empty, and
if after the rescan worker clears BTRFS_QGROUP_STATUS_FLAG_RESCAN and
before it calls complete_all() against
fs_info->qgroup_rescan_completion, the task at CPU 3 calls
init_completion() against fs_info->qgroup_rescan_completion which
re-initilizes its wait queue to an empty queue, therefore causing the
rescan worker at CPU 2 to call complete_all() against an empty queue,
never waking up the task waiting for that rescan worker.
Fix this by clearing BTRFS_QGROUP_STATUS_FLAG_RESCAN and setting
fs_info->qgroup_rescan_running to false in the same critical section,
delimited by the mutex fs_info->qgroup_rescan_lock, as well as doing the
call to complete_all() in that same critical section. This gives the
protection needed to avoid rescan wait ioctl callers not waiting for a
running rescan worker and the lost wake ups problem, since setting that
rescan flag and boolean as well as initializing the wait queue is done
already in a critical section delimited by that mutex (at
qgroup_rescan_init()).
Fixes:
57254b6ebce4ce ("Btrfs: add ioctl to wait for qgroup rescan completion")
Fixes:
d2c609b834d62f ("btrfs: properly track when rescan worker is running")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qu Wenruo [Mon, 16 Sep 2019 12:02:39 +0000 (20:02 +0800)]
btrfs: qgroup: Fix reserved data space leak if we have multiple reserve calls
commit
d4e204948fe3e0dc8e1fbf3f8f3290c9c2823be3 upstream.
[BUG]
The following script can cause btrfs qgroup data space leak:
mkfs.btrfs -f $dev
mount $dev -o nospace_cache $mnt
btrfs subv create $mnt/subv
btrfs quota en $mnt
btrfs quota rescan -w $mnt
btrfs qgroup limit 128m $mnt/subv
for (( i = 0; i < 3; i++)); do
# Create 3 64M holes for latter fallocate to fail
truncate -s 192m $mnt/subv/file
xfs_io -c "pwrite 64m 4k" $mnt/subv/file > /dev/null
xfs_io -c "pwrite 128m 4k" $mnt/subv/file > /dev/null
sync
# it's supposed to fail, and each failure will leak at least 64M
# data space
xfs_io -f -c "falloc 0 192m" $mnt/subv/file &> /dev/null
rm $mnt/subv/file
sync
done
# Shouldn't fail after we removed the file
xfs_io -f -c "falloc 0 64m" $mnt/subv/file
[CAUSE]
Btrfs qgroup data reserve code allow multiple reservations to happen on
a single extent_changeset:
E.g:
btrfs_qgroup_reserve_data(inode, &data_reserved, 0, SZ_1M);
btrfs_qgroup_reserve_data(inode, &data_reserved, SZ_1M, SZ_2M);
btrfs_qgroup_reserve_data(inode, &data_reserved, 0, SZ_4M);
Btrfs qgroup code has its internal tracking to make sure we don't
double-reserve in above example.
The only pattern utilizing this feature is in the main while loop of
btrfs_fallocate() function.
However btrfs_qgroup_reserve_data()'s error handling has a bug in that
on error it clears all ranges in the io_tree with EXTENT_QGROUP_RESERVED
flag but doesn't free previously reserved bytes.
This bug has a two fold effect:
- Clearing EXTENT_QGROUP_RESERVED ranges
This is the correct behavior, but it prevents
btrfs_qgroup_check_reserved_leak() to catch the leakage as the
detector is purely EXTENT_QGROUP_RESERVED flag based.
- Leak the previously reserved data bytes.
The bug manifests when N calls to btrfs_qgroup_reserve_data are made and
the last one fails, leaking space reserved in the previous ones.
[FIX]
Also free previously reserved data bytes when btrfs_qgroup_reserve_data
fails.
Fixes:
524725537023 ("btrfs: qgroup: Introduce btrfs_qgroup_reserve_data function")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qu Wenruo [Mon, 16 Sep 2019 12:02:38 +0000 (20:02 +0800)]
btrfs: qgroup: Fix the wrong target io_tree when freeing reserved data space
commit
bab32fc069ce8829c416e8737c119f62a57970f9 upstream.
[BUG]
Under the following case with qgroup enabled, if some error happened
after we have reserved delalloc space, then in error handling path, we
could cause qgroup data space leakage:
From btrfs_truncate_block() in inode.c:
ret = btrfs_delalloc_reserve_space(inode, &data_reserved,
block_start, blocksize);
if (ret)
goto out;
again:
page = find_or_create_page(mapping, index, mask);
if (!page) {
btrfs_delalloc_release_space(inode, data_reserved,
block_start, blocksize, true);
btrfs_delalloc_release_extents(BTRFS_I(inode), blocksize, true);
ret = -ENOMEM;
goto out;
}
[CAUSE]
In the above case, btrfs_delalloc_reserve_space() will call
btrfs_qgroup_reserve_data() and mark the io_tree range with
EXTENT_QGROUP_RESERVED flag.
In the error handling path, we have the following call stack:
btrfs_delalloc_release_space()
|- btrfs_free_reserved_data_space()
|- btrsf_qgroup_free_data()
|- __btrfs_qgroup_release_data(reserved=@reserved, free=1)
|- qgroup_free_reserved_data(reserved=@reserved)
|- clear_record_extent_bits();
|- freed += changeset.bytes_changed;
However due to a completion bug, qgroup_free_reserved_data() will clear
EXTENT_QGROUP_RESERVED flag in BTRFS_I(inode)->io_failure_tree, other
than the correct BTRFS_I(inode)->io_tree.
Since io_failure_tree is never marked with that flag,
btrfs_qgroup_free_data() will not free any data reserved space at all,
causing a leakage.
This type of error handling can only be triggered by errors outside of
qgroup code. So EDQUOT error from qgroup can't trigger it.
[FIX]
Fix the wrong target io_tree.
Reported-by: Josef Bacik <josef@toxicpanda.com>
Fixes:
bc42bda22345 ("btrfs: qgroup: Fix qgroup reserved space underflow by only freeing reserved ranges")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nikolay Borisov [Wed, 4 Sep 2019 16:33:58 +0000 (19:33 +0300)]
btrfs: Relinquish CPUs in btrfs_compare_trees
commit
6af112b11a4bc1b560f60a618ac9c1dcefe9836e upstream.
When doing any form of incremental send the parent and the child trees
need to be compared via btrfs_compare_trees. This can result in long
loop chains without ever relinquishing the CPU. This causes softlockup
detector to trigger when comparing trees with a lot of items. Example
report:
watchdog: BUG: soft lockup - CPU#0 stuck for 24s! [snapperd:16153]
CPU: 0 PID: 16153 Comm: snapperd Not tainted 5.2.9-1-default #1 openSUSE Tumbleweed (unreleased)
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate:
40000005 (nZcv daif -PAN -UAO)
pc : __ll_sc_arch_atomic_sub_return+0x14/0x20
lr : btrfs_release_extent_buffer_pages+0xe0/0x1e8 [btrfs]
sp :
ffff00001273b7e0
Call trace:
__ll_sc_arch_atomic_sub_return+0x14/0x20
release_extent_buffer+0xdc/0x120 [btrfs]
free_extent_buffer.part.0+0xb0/0x118 [btrfs]
free_extent_buffer+0x24/0x30 [btrfs]
btrfs_release_path+0x4c/0xa0 [btrfs]
btrfs_free_path.part.0+0x20/0x40 [btrfs]
btrfs_free_path+0x24/0x30 [btrfs]
get_inode_info+0xa8/0xf8 [btrfs]
finish_inode_if_needed+0xe0/0x6d8 [btrfs]
changed_cb+0x9c/0x410 [btrfs]
btrfs_compare_trees+0x284/0x648 [btrfs]
send_subvol+0x33c/0x520 [btrfs]
btrfs_ioctl_send+0x8a0/0xaf0 [btrfs]
btrfs_ioctl+0x199c/0x2288 [btrfs]
do_vfs_ioctl+0x4b0/0x820
ksys_ioctl+0x84/0xb8
__arm64_sys_ioctl+0x28/0x38
el0_svc_common.constprop.0+0x7c/0x188
el0_svc_handler+0x34/0x90
el0_svc+0x8/0xc
Fix this by adding a call to cond_resched at the beginning of the main
loop in btrfs_compare_trees.
Fixes:
7069830a9e38 ("Btrfs: add btrfs_compare_trees function")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Mon, 12 Aug 2019 18:14:29 +0000 (19:14 +0100)]
Btrfs: fix use-after-free when using the tree modification log
commit
efad8a853ad2057f96664328a0d327a05ce39c76 upstream.
At ctree.c:get_old_root(), we are accessing a root's header owner field
after we have freed the respective extent buffer. This results in an
use-after-free that can lead to crashes, and when CONFIG_DEBUG_PAGEALLOC
is set, results in a stack trace like the following:
[ 3876.799331] stack segment: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
[ 3876.799363] CPU: 0 PID: 15436 Comm: pool Not tainted 5.3.0-rc3-btrfs-next-54 #1
[ 3876.799385] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
[ 3876.799433] RIP: 0010:btrfs_search_old_slot+0x652/0xd80 [btrfs]
(...)
[ 3876.799502] RSP: 0018:
ffff9f08c1a2f9f0 EFLAGS:
00010286
[ 3876.799518] RAX:
ffff8dd300000000 RBX:
ffff8dd85a7a9348 RCX:
000000038da26000
[ 3876.799538] RDX:
0000000000000000 RSI:
ffffe522ce368980 RDI:
0000000000000246
[ 3876.799559] RBP:
dae1922adadad000 R08:
0000000008020000 R09:
ffffe522c0000000
[ 3876.799579] R10:
ffff8dd57fd788c8 R11:
000000007511b030 R12:
ffff8dd781ddc000
[ 3876.799599] R13:
ffff8dd9e6240578 R14:
ffff8dd6896f7a88 R15:
ffff8dd688cf90b8
[ 3876.799620] FS:
00007f23ddd97700(0000) GS:
ffff8dda20200000(0000) knlGS:
0000000000000000
[ 3876.799643] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 3876.799660] CR2:
00007f23d4024000 CR3:
0000000710bb0005 CR4:
00000000003606f0
[ 3876.799682] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 3876.799703] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 3876.799723] Call Trace:
[ 3876.799735] ? do_raw_spin_unlock+0x49/0xc0
[ 3876.799749] ? _raw_spin_unlock+0x24/0x30
[ 3876.799779] resolve_indirect_refs+0x1eb/0xc80 [btrfs]
[ 3876.799810] find_parent_nodes+0x38d/0x1180 [btrfs]
[ 3876.799841] btrfs_check_shared+0x11a/0x1d0 [btrfs]
[ 3876.799870] ? extent_fiemap+0x598/0x6e0 [btrfs]
[ 3876.799895] extent_fiemap+0x598/0x6e0 [btrfs]
[ 3876.799913] do_vfs_ioctl+0x45a/0x700
[ 3876.799926] ksys_ioctl+0x70/0x80
[ 3876.799938] ? trace_hardirqs_off_thunk+0x1a/0x20
[ 3876.799953] __x64_sys_ioctl+0x16/0x20
[ 3876.799965] do_syscall_64+0x62/0x220
[ 3876.799977] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 3876.799993] RIP: 0033:0x7f23e0013dd7
(...)
[ 3876.800056] RSP: 002b:
00007f23ddd96ca8 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[ 3876.800078] RAX:
ffffffffffffffda RBX:
00007f23d80210f8 RCX:
00007f23e0013dd7
[ 3876.800099] RDX:
00007f23d80210f8 RSI:
00000000c020660b RDI:
0000000000000003
[ 3876.800626] RBP:
000055fa2a2a2440 R08:
0000000000000000 R09:
00007f23ddd96d7c
[ 3876.801143] R10:
00007f23d8022000 R11:
0000000000000246 R12:
00007f23ddd96d80
[ 3876.801662] R13:
00007f23ddd96d78 R14:
00007f23d80210f0 R15:
00007f23ddd96d80
(...)
[ 3876.805107] ---[ end trace
e53161e179ef04f9 ]---
Fix that by saving the root's header owner field into a local variable
before freeing the root's extent buffer, and then use that local variable
when needed.
Fixes:
30b0463a9394d9 ("Btrfs: fix accessing the root pointer in tree mod log functions")
CC: stable@vger.kernel.org # 3.10+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe Leroy [Wed, 21 Aug 2019 15:05:55 +0000 (15:05 +0000)]
btrfs: fix allocation of free space cache v1 bitmap pages
commit
3acd48507dc43eeeb0a1fe965b8bad91cab904a7 upstream.
Various notifications of type "BUG kmalloc-4096 () : Redzone
overwritten" have been observed recently in various parts of the kernel.
After some time, it has been made a relation with the use of BTRFS
filesystem and with SLUB_DEBUG turned on.
[ 22.809700] BUG kmalloc-4096 (Tainted: G W ): Redzone overwritten
[ 22.810286] INFO: 0xbe1a5921-0xfbfc06cd. First byte 0x0 instead of 0xcc
[ 22.810866] INFO: Allocated in __load_free_space_cache+0x588/0x780 [btrfs] age=22 cpu=0 pid=224
[ 22.811193] __slab_alloc.constprop.26+0x44/0x70
[ 22.811345] kmem_cache_alloc_trace+0xf0/0x2ec
[ 22.811588] __load_free_space_cache+0x588/0x780 [btrfs]
[ 22.811848] load_free_space_cache+0xf4/0x1b0 [btrfs]
[ 22.812090] cache_block_group+0x1d0/0x3d0 [btrfs]
[ 22.812321] find_free_extent+0x680/0x12a4 [btrfs]
[ 22.812549] btrfs_reserve_extent+0xec/0x220 [btrfs]
[ 22.812785] btrfs_alloc_tree_block+0x178/0x5f4 [btrfs]
[ 22.813032] __btrfs_cow_block+0x150/0x5d4 [btrfs]
[ 22.813262] btrfs_cow_block+0x194/0x298 [btrfs]
[ 22.813484] commit_cowonly_roots+0x44/0x294 [btrfs]
[ 22.813718] btrfs_commit_transaction+0x63c/0xc0c [btrfs]
[ 22.813973] close_ctree+0xf8/0x2a4 [btrfs]
[ 22.814107] generic_shutdown_super+0x80/0x110
[ 22.814250] kill_anon_super+0x18/0x30
[ 22.814437] btrfs_kill_super+0x18/0x90 [btrfs]
[ 22.814590] INFO: Freed in proc_cgroup_show+0xc0/0x248 age=41 cpu=0 pid=83
[ 22.814841] proc_cgroup_show+0xc0/0x248
[ 22.814967] proc_single_show+0x54/0x98
[ 22.815086] seq_read+0x278/0x45c
[ 22.815190] __vfs_read+0x28/0x17c
[ 22.815289] vfs_read+0xa8/0x14c
[ 22.815381] ksys_read+0x50/0x94
[ 22.815475] ret_from_syscall+0x0/0x38
Commit
69d2480456d1 ("btrfs: use copy_page for copying pages instead of
memcpy") changed the way bitmap blocks are copied. But allthough bitmaps
have the size of a page, they were allocated with kzalloc().
Most of the time, kzalloc() allocates aligned blocks of memory, so
copy_page() can be used. But when some debug options like SLAB_DEBUG are
activated, kzalloc() may return unaligned pointer.
On powerpc, memcpy(), copy_page() and other copying functions use
'dcbz' instruction which provides an entire zeroed cacheline to avoid
memory read when the intention is to overwrite a full line. Functions
like memcpy() are writen to care about partial cachelines at the start
and end of the destination, but copy_page() assumes it gets pages. As
pages are naturally cache aligned, copy_page() doesn't care about
partial lines. This means that when copy_page() is called with a
misaligned pointer, a few leading bytes are zeroed.
To fix it, allocate bitmaps through kmem_cache instead of using kzalloc()
The cache pool is created with PAGE_SIZE alignment constraint.
Reported-by: Erhard F. <erhard_f@mailbox.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204371
Fixes:
69d2480456d1 ("btrfs: use copy_page for copying pages instead of memcpy")
Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: David Sterba <dsterba@suse.com>
[ rename to btrfs_free_space_bitmap ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Salyzyn [Thu, 29 Aug 2019 18:30:14 +0000 (11:30 -0700)]
ovl: filter of trusted xattr results in audit
commit
5c2e9f346b815841f9bed6029ebcb06415caf640 upstream.
When filtering xattr list for reading, presence of trusted xattr
results in a security audit log. However, if there is other content
no errno will be set, and if there isn't, the errno will be -ENODATA
and not -EPERM as is usually associated with a lack of capability.
The check does not block the request to list the xattrs present.
Switch to ns_capable_noaudit to reflect a more appropriate check.
Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Cc: linux-security-module@vger.kernel.org
Cc: kernel-team@android.com
Cc: stable@vger.kernel.org # v3.18+
Fixes:
a082c6f680da ("ovl: filter trusted xattr for non-admin")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ding Xiang [Mon, 9 Sep 2019 08:29:56 +0000 (16:29 +0800)]
ovl: Fix dereferencing possible ERR_PTR()
commit
97f024b9171e74c4443bbe8a8dce31b917f97ac5 upstream.
if ovl_encode_real_fh() fails, no memory was allocated
and the error in the error-valued pointer should be returned.
Fixes:
9b6faee07470 ("ovl: check ERR_PTR() return value from ovl_encode_fh()")
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Cc: <stable@vger.kernel.org> # v4.16+
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve French [Thu, 12 Sep 2019 02:46:20 +0000 (21:46 -0500)]
smb3: allow disabling requesting leases
commit
3e7a02d47872081f4b6234a9f72500f1d10f060c upstream.
In some cases to work around server bugs or performance
problems it can be helpful to be able to disable requesting
SMB2.1/SMB3 leases on a particular mount (not to all servers
and all shares we are mounted to). Add new mount parm
"nolease" which turns off requesting leases on directory
or file opens. Currently the only way to disable leases is
globally through a module load parameter. This is more
granular.
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yufen Yu [Fri, 27 Sep 2019 08:19:55 +0000 (16:19 +0800)]
block: fix null pointer dereference in blk_mq_rq_timed_out()
commit
8d6996630c03d7ceeabe2611378fea5ca1c3f1b3 upstream.
We got a null pointer deference BUG_ON in blk_mq_rq_timed_out()
as following:
[ 108.825472] BUG: kernel NULL pointer dereference, address:
0000000000000040
[ 108.827059] PGD 0 P4D 0
[ 108.827313] Oops: 0000 [#1] SMP PTI
[ 108.827657] CPU: 6 PID: 198 Comm: kworker/6:1H Not tainted 5.3.0-rc8+ #431
[ 108.829503] Workqueue: kblockd blk_mq_timeout_work
[ 108.829913] RIP: 0010:blk_mq_check_expired+0x258/0x330
[ 108.838191] Call Trace:
[ 108.838406] bt_iter+0x74/0x80
[ 108.838665] blk_mq_queue_tag_busy_iter+0x204/0x450
[ 108.839074] ? __switch_to_asm+0x34/0x70
[ 108.839405] ? blk_mq_stop_hw_queue+0x40/0x40
[ 108.839823] ? blk_mq_stop_hw_queue+0x40/0x40
[ 108.840273] ? syscall_return_via_sysret+0xf/0x7f
[ 108.840732] blk_mq_timeout_work+0x74/0x200
[ 108.841151] process_one_work+0x297/0x680
[ 108.841550] worker_thread+0x29c/0x6f0
[ 108.841926] ? rescuer_thread+0x580/0x580
[ 108.842344] kthread+0x16a/0x1a0
[ 108.842666] ? kthread_flush_work+0x170/0x170
[ 108.843100] ret_from_fork+0x35/0x40
The bug is caused by the race between timeout handle and completion for
flush request.
When timeout handle function blk_mq_rq_timed_out() try to read
'req->q->mq_ops', the 'req' have completed and reinitiated by next
flush request, which would call blk_rq_init() to clear 'req' as 0.
After commit
12f5b93145 ("blk-mq: Remove generation seqeunce"),
normal requests lifetime are protected by refcount. Until 'rq->ref'
drop to zero, the request can really be free. Thus, these requests
cannot been reused before timeout handle finish.
However, flush request has defined .end_io and rq->end_io() is still
called even if 'rq->ref' doesn't drop to zero. After that, the 'flush_rq'
can be reused by the next flush request handle, resulting in null
pointer deference BUG ON.
We fix this problem by covering flush request with 'rq->ref'.
If the refcount is not zero, flush_end_io() return and wait the
last holder recall it. To record the request status, we add a new
entry 'rq_status', which will be used in flush_end_io().
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: stable@vger.kernel.org # v4.18+
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-------
v2:
- move rq_status from struct request to struct blk_flush_queue
v3:
- remove unnecessary '{}' pair.
v4:
- let spinlock to protect 'fq->rq_status'
v5:
- move rq_status after flush_running_idx member of struct blk_flush_queue
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stefan Assmann [Wed, 21 Aug 2019 14:09:29 +0000 (16:09 +0200)]
i40e: check __I40E_VF_DISABLE bit in i40e_sync_filters_subtask
commit
a7542b87607560d0b89e7ff81d870bd6ff8835cb upstream.
While testing VF spawn/destroy the following panic occurred.
BUG: unable to handle kernel NULL pointer dereference at
0000000000000029
[...]
Workqueue: i40e i40e_service_task [i40e]
RIP: 0010:i40e_sync_vsi_filters+0x6fd/0xc60 [i40e]
[...]
Call Trace:
? __switch_to_asm+0x35/0x70
? __switch_to_asm+0x41/0x70
? __switch_to_asm+0x35/0x70
? _cond_resched+0x15/0x30
i40e_sync_filters_subtask+0x56/0x70 [i40e]
i40e_service_task+0x382/0x11b0 [i40e]
? __switch_to_asm+0x41/0x70
? __switch_to_asm+0x41/0x70
process_one_work+0x1a7/0x3b0
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x112/0x130
? kthread_bind+0x30/0x30
ret_from_fork+0x35/0x40
Investigation revealed a race where pf->vf[vsi->vf_id].trusted may get
accessed by the watchdog via i40e_sync_filters_subtask() although
i40e_free_vfs() already free'd pf->vf.
To avoid this the call to i40e_sync_vsi_filters() in
i40e_sync_filters_subtask() needs to be guarded by __I40E_VF_DISABLE,
which is also used by i40e_free_vfs().
Note: put the __I40E_VF_DISABLE check after the
__I40E_MACVLAN_SYNC_PENDING check as the latter is more likely to
trigger.
CC: stable@vger.kernel.org
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Hocko [Wed, 25 Sep 2019 23:45:53 +0000 (16:45 -0700)]
memcg, kmem: do not fail __GFP_NOFAIL charges
commit
e55d9d9bfb69405bd7615c0f8d229d8fafb3e9b8 upstream.
Thomas has noticed the following NULL ptr dereference when using cgroup
v1 kmem limit:
BUG: unable to handle kernel NULL pointer dereference at
0000000000000008
PGD 0
P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 16923 Comm: gtk-update-icon Not tainted 4.19.51 #42
Hardware name: Gigabyte Technology Co., Ltd. Z97X-Gaming G1/Z97X-Gaming G1, BIOS F9 07/31/2015
RIP: 0010:create_empty_buffers+0x24/0x100
Code: cd 0f 1f 44 00 00 0f 1f 44 00 00 41 54 49 89 d4 ba 01 00 00 00 55 53 48 89 fb e8 97 fe ff ff 48 89 c5 48 89 c2 eb 03 48 89 ca <48> 8b 4a 08 4c 09 22 48 85 c9 75 f1 48 89 6a 08 48 8b 43 18 48 8d
RSP: 0018:
ffff927ac1b37bf8 EFLAGS:
00010286
RAX:
0000000000000000 RBX:
fffff2d4429fd740 RCX:
0000000100097149
RDX:
0000000000000000 RSI:
0000000000000082 RDI:
ffff9075a99fbe00
RBP:
0000000000000000 R08:
fffff2d440949cc8 R09:
00000000000960c0
R10:
0000000000000002 R11:
0000000000000000 R12:
0000000000000000
R13:
ffff907601f18360 R14:
0000000000002000 R15:
0000000000001000
FS:
00007fb55b288bc0(0000) GS:
ffff90761f8c0000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000008 CR3:
000000007aebc002 CR4:
00000000001606e0
Call Trace:
create_page_buffers+0x4d/0x60
__block_write_begin_int+0x8e/0x5a0
? ext4_inode_attach_jinode.part.82+0xb0/0xb0
? jbd2__journal_start+0xd7/0x1f0
ext4_da_write_begin+0x112/0x3d0
generic_perform_write+0xf1/0x1b0
? file_update_time+0x70/0x140
__generic_file_write_iter+0x141/0x1a0
ext4_file_write_iter+0xef/0x3b0
__vfs_write+0x17e/0x1e0
vfs_write+0xa5/0x1a0
ksys_write+0x57/0xd0
do_syscall_64+0x55/0x160
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Tetsuo then noticed that this is because the __memcg_kmem_charge_memcg
fails __GFP_NOFAIL charge when the kmem limit is reached. This is a wrong
behavior because nofail allocations are not allowed to fail. Normal
charge path simply forces the charge even if that means to cross the
limit. Kmem accounting should be doing the same.
Link: http://lkml.kernel.org/r/20190906125608.32129-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Debugged-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Thomas Lindroth <thomas.lindroth@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuo Handa [Mon, 23 Sep 2019 22:37:08 +0000 (15:37 -0700)]
memcg, oom: don't require __GFP_FS when invoking memcg OOM killer
commit
f9c645621a28e37813a1de96d9cbd89cde94a1e4 upstream.
Masoud Sharbiani noticed that commit
29ef680ae7c21110 ("memcg, oom: move
out_of_memory back to the charge path") broke memcg OOM called from
__xfs_filemap_fault() path. It turned out that try_charge() is retrying
forever without making forward progress because mem_cgroup_oom(GFP_NOFS)
cannot invoke the OOM killer due to commit
3da88fb3bacfaa33 ("mm, oom:
move GFP_NOFS check to out_of_memory").
Allowing forced charge due to being unable to invoke memcg OOM killer will
lead to global OOM situation. Also, just returning -ENOMEM will be risky
because OOM path is lost and some paths (e.g. get_user_pages()) will leak
-ENOMEM. Therefore, invoking memcg OOM killer (despite GFP_NOFS) will be
the only choice we can choose for now.
Until
29ef680ae7c21110, we were able to invoke memcg OOM killer when
GFP_KERNEL reclaim failed [1]. But since
29ef680ae7c21110, we need to
invoke memcg OOM killer when GFP_NOFS reclaim failed [2]. Although in the
past we did invoke memcg OOM killer for GFP_NOFS [3], we might get
pre-mature memcg OOM reports due to this patch.
[1]
leaker invoked oom-killer: gfp_mask=0x6200ca(GFP_HIGHUSER_MOVABLE), nodemask=(null), order=0, oom_score_adj=0
CPU: 0 PID: 2746 Comm: leaker Not tainted 4.18.0+ #19
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018
Call Trace:
dump_stack+0x63/0x88
dump_header+0x67/0x27a
? mem_cgroup_scan_tasks+0x91/0xf0
oom_kill_process+0x210/0x410
out_of_memory+0x10a/0x2c0
mem_cgroup_out_of_memory+0x46/0x80
mem_cgroup_oom_synchronize+0x2e4/0x310
? high_work_func+0x20/0x20
pagefault_out_of_memory+0x31/0x76
mm_fault_error+0x55/0x115
? handle_mm_fault+0xfd/0x220
__do_page_fault+0x433/0x4e0
do_page_fault+0x22/0x30
? page_fault+0x8/0x30
page_fault+0x1e/0x30
RIP: 0033:0x4009f0
Code: 03 00 00 00 e8 71 fd ff ff 48 83 f8 ff 49 89 c6 74 74 48 89 c6 bf c0 0c 40 00 31 c0 e8 69 fd ff ff 45 85 ff 7e 21 31 c9 66 90 <41> 0f be 14 0e 01 d3 f7 c1 ff 0f 00 00 75 05 41 c6 04 0e 2a 48 83
RSP: 002b:
00007ffe29ae96f0 EFLAGS:
00010206
RAX:
000000000000001b RBX:
0000000000000000 RCX:
0000000001ce1000
RDX:
0000000000000000 RSI:
000000007fffffe5 RDI:
0000000000000000
RBP:
000000000000000c R08:
0000000000000000 R09:
00007f94be09220d
R10:
0000000000000002 R11:
0000000000000246 R12:
00000000000186a0
R13:
0000000000000003 R14:
00007f949d845000 R15:
0000000002800000
Task in /leaker killed as a result of limit of /leaker
memory: usage 524288kB, limit 524288kB, failcnt 158965
memory+swap: usage 0kB, limit 9007199254740988kB, failcnt 0
kmem: usage 2016kB, limit 9007199254740988kB, failcnt 0
Memory cgroup stats for /leaker: cache:844KB rss:521136KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:132KB writeback:0KB inactive_anon:0KB active_anon:521224KB inactive_file:1012KB active_file:8KB unevictable:0KB
Memory cgroup out of memory: Kill process 2746 (leaker) score 998 or sacrifice child
Killed process 2746 (leaker) total-vm:536704kB, anon-rss:521176kB, file-rss:1208kB, shmem-rss:0kB
oom_reaper: reaped process 2746 (leaker), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
[2]
leaker invoked oom-killer: gfp_mask=0x600040(GFP_NOFS), nodemask=(null), order=0, oom_score_adj=0
CPU: 1 PID: 2746 Comm: leaker Not tainted 4.18.0+ #20
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018
Call Trace:
dump_stack+0x63/0x88
dump_header+0x67/0x27a
? mem_cgroup_scan_tasks+0x91/0xf0
oom_kill_process+0x210/0x410
out_of_memory+0x109/0x2d0
mem_cgroup_out_of_memory+0x46/0x80
try_charge+0x58d/0x650
? __radix_tree_replace+0x81/0x100
mem_cgroup_try_charge+0x7a/0x100
__add_to_page_cache_locked+0x92/0x180
add_to_page_cache_lru+0x4d/0xf0
iomap_readpages_actor+0xde/0x1b0
? iomap_zero_range_actor+0x1d0/0x1d0
iomap_apply+0xaf/0x130
iomap_readpages+0x9f/0x150
? iomap_zero_range_actor+0x1d0/0x1d0
xfs_vm_readpages+0x18/0x20 [xfs]
read_pages+0x60/0x140
__do_page_cache_readahead+0x193/0x1b0
ondemand_readahead+0x16d/0x2c0
page_cache_async_readahead+0x9a/0xd0
filemap_fault+0x403/0x620
? alloc_set_pte+0x12c/0x540
? _cond_resched+0x14/0x30
__xfs_filemap_fault+0x66/0x180 [xfs]
xfs_filemap_fault+0x27/0x30 [xfs]
__do_fault+0x19/0x40
__handle_mm_fault+0x8e8/0xb60
handle_mm_fault+0xfd/0x220
__do_page_fault+0x238/0x4e0
do_page_fault+0x22/0x30
? page_fault+0x8/0x30
page_fault+0x1e/0x30
RIP: 0033:0x4009f0
Code: 03 00 00 00 e8 71 fd ff ff 48 83 f8 ff 49 89 c6 74 74 48 89 c6 bf c0 0c 40 00 31 c0 e8 69 fd ff ff 45 85 ff 7e 21 31 c9 66 90 <41> 0f be 14 0e 01 d3 f7 c1 ff 0f 00 00 75 05 41 c6 04 0e 2a 48 83
RSP: 002b:
00007ffda45c9290 EFLAGS:
00010206
RAX:
000000000000001b RBX:
0000000000000000 RCX:
0000000001a1e000
RDX:
0000000000000000 RSI:
000000007fffffe5 RDI:
0000000000000000
RBP:
000000000000000c R08:
0000000000000000 R09:
00007f6d061ff20d
R10:
0000000000000002 R11:
0000000000000246 R12:
00000000000186a0
R13:
0000000000000003 R14:
00007f6ce59b2000 R15:
0000000002800000
Task in /leaker killed as a result of limit of /leaker
memory: usage 524288kB, limit 524288kB, failcnt 7221
memory+swap: usage 0kB, limit 9007199254740988kB, failcnt 0
kmem: usage 1944kB, limit 9007199254740988kB, failcnt 0
Memory cgroup stats for /leaker: cache:3632KB rss:518232KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:0KB writeback:0KB inactive_anon:0KB active_anon:518408KB inactive_file:3908KB active_file:12KB unevictable:0KB
Memory cgroup out of memory: Kill process 2746 (leaker) score 992 or sacrifice child
Killed process 2746 (leaker) total-vm:536704kB, anon-rss:518264kB, file-rss:1188kB, shmem-rss:0kB
oom_reaper: reaped process 2746 (leaker), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
[3]
leaker invoked oom-killer: gfp_mask=0x50, order=0, oom_score_adj=0
leaker cpuset=/ mems_allowed=0
CPU: 1 PID: 3206 Comm: leaker Not tainted 3.10.0-957.27.2.el7.x86_64 #1
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018
Call Trace:
[<
ffffffffaf364147>] dump_stack+0x19/0x1b
[<
ffffffffaf35eb6a>] dump_header+0x90/0x229
[<
ffffffffaedbb456>] ? find_lock_task_mm+0x56/0xc0
[<
ffffffffaee32a38>] ? try_get_mem_cgroup_from_mm+0x28/0x60
[<
ffffffffaedbb904>] oom_kill_process+0x254/0x3d0
[<
ffffffffaee36c36>] mem_cgroup_oom_synchronize+0x546/0x570
[<
ffffffffaee360b0>] ? mem_cgroup_charge_common+0xc0/0xc0
[<
ffffffffaedbc194>] pagefault_out_of_memory+0x14/0x90
[<
ffffffffaf35d072>] mm_fault_error+0x6a/0x157
[<
ffffffffaf3717c8>] __do_page_fault+0x3c8/0x4f0
[<
ffffffffaf371925>] do_page_fault+0x35/0x90
[<
ffffffffaf36d768>] page_fault+0x28/0x30
Task in /leaker killed as a result of limit of /leaker
memory: usage 524288kB, limit 524288kB, failcnt 20628
memory+swap: usage 524288kB, limit 9007199254740988kB, failcnt 0
kmem: usage 0kB, limit 9007199254740988kB, failcnt 0
Memory cgroup stats for /leaker: cache:840KB rss:523448KB rss_huge:0KB mapped_file:0KB swap:0KB inactive_anon:0KB active_anon:523448KB inactive_file:464KB active_file:376KB unevictable:0KB
Memory cgroup out of memory: Kill process 3206 (leaker) score 970 or sacrifice child
Killed process 3206 (leaker) total-vm:536692kB, anon-rss:523304kB, file-rss:412kB, shmem-rss:0kB
Bisected by Masoud Sharbiani.
Link: http://lkml.kernel.org/r/cbe54ed1-b6ba-a056-8899-2dc42526371d@i-love.sakura.ne.jp
Fixes:
3da88fb3bacfaa33 ("mm, oom: move GFP_NOFS check to out_of_memory") [necessary after
29ef680ae7c21110]
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Masoud Sharbiani <msharbiani@apple.com>
Tested-by: Masoud Sharbiani <msharbiani@apple.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org> [4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bob Peterson [Thu, 12 Sep 2019 17:54:27 +0000 (13:54 -0400)]
gfs2: clear buf_in_tr when ending a transaction in sweep_bh_for_rgrps
commit
f0b444b349e33ae0d3dd93e25ca365482a5d17d4 upstream.
In function sweep_bh_for_rgrps, which is a helper for punch_hole,
it uses variable buf_in_tr to keep track of when it needs to commit
pending block frees on a partial delete that overflows the
transaction created for the delete. The problem is that the
variable was initialized at the start of function sweep_bh_for_rgrps
but it was never cleared, even when starting a new transaction.
This patch reinitializes the variable when the transaction is
ended, so the next transaction starts out with it cleared.
Fixes:
d552a2b9b33e ("GFS2: Non-recursive delete")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Sun, 21 Jul 2019 13:19:18 +0000 (15:19 +0200)]
efifb: BGRT: Improve efifb_bgrt_sanity_check
commit
51677dfcc17f88ed754143df670ff064eae67f84 upstream.
For various reasons, at least with x86 EFI firmwares, the xoffset and
yoffset in the BGRT info are not always reliable.
Extensive testing has shown that when the info is correct, the
BGRT image is always exactly centered horizontally (the yoffset variable
is more variable and not always predictable).
This commit simplifies / improves the bgrt_sanity_check to simply
check that the BGRT image is exactly centered horizontally and skips
(re)drawing it when it is not.
This fixes the BGRT image sometimes being drawn in the wrong place.
Cc: stable@vger.kernel.org
Fixes:
88fe4ceb2447 ("efifb: BGRT: Do not copy the boot graphics for non native resolutions")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: Peter Jones <pjones@redhat.com>,
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190721131918.10115-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Brown [Wed, 4 Sep 2019 12:42:50 +0000 (13:42 +0100)]
regulator: Defer init completion for a while after late_initcall
commit
55576cf1853798e86f620766e23b604c9224c19c upstream.
The kernel has no way of knowing when we have finished instantiating
drivers, between deferred probe and systems that build key drivers as
modules we might be doing this long after userspace has booted. This has
always been a bit of an issue with regulator_init_complete since it can
power off hardware that's not had it's driver loaded which can result in
user visible effects, the main case is powering off displays. Practically
speaking it's not been an issue in real systems since most systems that
use the regulator API are embedded and build in key drivers anyway but
with Arm laptops coming on the market it's becoming more of an issue so
let's do something about it.
In the absence of any better idea just defer the powering off for 30s
after late_initcall(), this is obviously a hack but it should mask the
issue for now and it's no more arbitrary than late_initcall() itself.
Ideally we'd have some heuristics to detect if we're on an affected
system and tune or skip the delay appropriately, and there may be some
need for a command line option to be added.
Link: https://lore.kernel.org/r/20190904124250.25844-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Lee Jones <lee.jones@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thadeu Lima de Souza Cascardo [Tue, 3 Sep 2019 17:18:02 +0000 (14:18 -0300)]
alarmtimer: Use EOPNOTSUPP instead of ENOTSUPP
commit
f18ddc13af981ce3c7b7f26925f099e7c6929aba upstream.
ENOTSUPP is not supposed to be returned to userspace. This was found on an
OpenPower machine, where the RTC does not support set_alarm.
On that system, a clock_nanosleep(CLOCK_REALTIME_ALARM, ...) results in
"524 Unknown error 524"
Replace it with EOPNOTSUPP which results in the expected "95 Operation not
supported" error.
Fixes:
1c6b39ad3f01 (alarmtimers: Return -ENOTSUPP if no RTC device is present)
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190903171802.28314-1-cascardo@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shawn Lin [Fri, 30 Aug 2019 00:26:47 +0000 (08:26 +0800)]
arm64: dts: rockchip: limit clock rate of MMC controllers for RK3328
commit
03e61929c0d227ed3e1c322fc3804216ea298b7e upstream.
150MHz is a fundamental limitation of RK3328 Soc, w/o this limitation,
eMMC, for instance, will run into 200MHz clock rate in HS200 mode, which
makes the RK3328 boards not always boot properly. By adding it in
rk3328.dtsi would also obviate the worry of missing it when adding new
boards.
Fixes:
52e02d377a72 ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs")
Cc: stable@vger.kernel.org
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Liang Chen <cl@rock-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Thu, 22 Aug 2019 14:03:45 +0000 (15:03 +0100)]
arm64: tlb: Ensure we execute an ISB following walk cache invalidation
commit
51696d346c49c6cf4f29e9b20d6e15832a2e3408 upstream.
05f2d2f83b5a ("arm64: tlbflush: Introduce __flush_tlb_kernel_pgtable")
added a new TLB invalidation helper which is used when freeing
intermediate levels of page table used for kernel mappings, but is
missing the required ISB instruction after completion of the TLBI
instruction.
Add the missing barrier.
Cc: <stable@vger.kernel.org>
Fixes:
05f2d2f83b5a ("arm64: tlbflush: Introduce __flush_tlb_kernel_pgtable")
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Thu, 22 Aug 2019 13:58:37 +0000 (14:58 +0100)]
Revert "arm64: Remove unnecessary ISBs from set_{pte,pmd,pud}"
commit
d0b7a302d58abe24ed0f32a0672dd4c356bb73db upstream.
This reverts commit
24fe1b0efad4fcdd32ce46cffeab297f22581707.
Commit
24fe1b0efad4fcdd ("arm64: Remove unnecessary ISBs from
set_{pte,pmd,pud}") removed ISB instructions immediately following updates
to the page table, on the grounds that they are not required by the
architecture and a DSB alone is sufficient to ensure that subsequent data
accesses use the new translation:
DDI0487E_a, B2-128:
| ... no instruction that appears in program order after the DSB
| instruction can alter any state of the system or perform any part of
| its functionality until the DSB completes other than:
|
| * Being fetched from memory and decoded
| * Reading the general-purpose, SIMD and floating-point,
| Special-purpose, or System registers that are directly or indirectly
| read without causing side-effects.
However, the same document also states the following:
DDI0487E_a, B2-125:
| DMB and DSB instructions affect reads and writes to the memory system
| generated by Load/Store instructions and data or unified cache
| maintenance instructions being executed by the PE. Instruction fetches
| or accesses caused by a hardware translation table access are not
| explicit accesses.
which appears to claim that the DSB alone is insufficient. Unfortunately,
some CPU designers have followed the second clause above, whereas in Linux
we've been relying on the first. This means that our mapping sequence:
MOV X0, <valid pte>
STR X0, [Xptep] // Store new PTE to page table
DSB ISHST
LDR X1, [X2] // Translates using the new PTE
can actually raise a translation fault on the load instruction because the
translation can be performed speculatively before the page table update and
then marked as "faulting" by the CPU. For user PTEs, this is ok because we
can handle the spurious fault, but for kernel PTEs and intermediate table
entries this results in a panic().
Revert the offending commit to reintroduce the missing barriers.
Cc: <stable@vger.kernel.org>
Fixes:
24fe1b0efad4fcdd ("arm64: Remove unnecessary ISBs from set_{pte,pmd,pud}")
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luis Araneda [Thu, 8 Aug 2019 12:52:43 +0000 (08:52 -0400)]
ARM: zynq: Use memcpy_toio instead of memcpy on smp bring-up
commit
b7005d4ef4f3aa2dc24019ffba03a322557ac43d upstream.
This fixes a kernel panic on memcpy when
FORTIFY_SOURCE is enabled.
The initial smp implementation on commit
aa7eb2bb4e4a
("arm: zynq: Add smp support")
used memcpy, which worked fine until commit
ee333554fed5
("ARM: 8749/1: Kconfig: Add ARCH_HAS_FORTIFY_SOURCE")
enabled overflow checks at runtime, producing a read
overflow panic.
The computed size of memcpy args are:
- p_size (dst):
4294967295 = (size_t) -1
- q_size (src): 1
- size (len): 8
Additionally, the memory is marked as __iomem, so one of
the memcpy_* functions should be used for read/write.
Fixes:
aa7eb2bb4e4a ("arm: zynq: Add smp support")
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lihua Yao [Sat, 7 Sep 2019 03:30:01 +0000 (03:30 +0000)]
ARM: samsung: Fix system restart on S3C6410
commit
16986074035cc0205472882a00d404ed9d213313 upstream.
S3C6410 system restart is triggered by watchdog reset.
Cc: <stable@vger.kernel.org>
Fixes:
9f55342cc2de ("ARM: dts: s3c64xx: Fix infinite interrupt in soft mode")
Signed-off-by: Lihua Yao <ylhuajnu@outlook.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amadeusz Sławiński [Tue, 27 Aug 2019 14:17:08 +0000 (16:17 +0200)]
ASoC: Intel: Fix use of potentially uninitialized variable
commit
810f3b860850148788fc1ed8a6f5f807199fed65 upstream.
If ipc->ops.reply_msg_match is NULL, we may end up using uninitialized
mask value.
reported by smatch:
sound/soc/intel/common/sst-ipc.c:266 sst_ipc_reply_find_msg() error: uninitialized symbol 'mask'.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com>
Link: https://lore.kernel.org/r/20190827141712.21015-3-amadeuszx.slawinski@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amadeusz Sławiński [Tue, 27 Aug 2019 14:17:07 +0000 (16:17 +0200)]
ASoC: Intel: Skylake: Use correct function to access iomem space
commit
17d29ff98fd4b70e9ccdac5e95e18a087e2737ef upstream.
For copying from __iomem, we should use __ioread32_copy.
reported by sparse:
sound/soc/intel/skylake/skl-debug.c:437:34: warning: incorrect type in argument 1 (different address spaces)
sound/soc/intel/skylake/skl-debug.c:437:34: expected void [noderef] <asn:2> *to
sound/soc/intel/skylake/skl-debug.c:437:34: got unsigned char *
sound/soc/intel/skylake/skl-debug.c:437:51: warning: incorrect type in argument 2 (different address spaces)
sound/soc/intel/skylake/skl-debug.c:437:51: expected void const *from
sound/soc/intel/skylake/skl-debug.c:437:51: got void [noderef] <asn:2> *[assigned] fw_reg_addr
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com>
Link: https://lore.kernel.org/r/20190827141712.21015-2-amadeuszx.slawinski@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amadeusz Sławiński [Tue, 27 Aug 2019 14:17:12 +0000 (16:17 +0200)]
ASoC: Intel: NHLT: Fix debug print format
commit
855a06da37a773fd073d51023ac9d07988c87da8 upstream.
oem_table_id is 8 chars long, so we need to limit it, otherwise it
may print some unprintable characters into dmesg.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com>
Link: https://lore.kernel.org/r/20190827141712.21015-7-amadeuszx.slawinski@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Thu, 26 Sep 2019 17:15:25 +0000 (10:15 -0700)]
binfmt_elf: Do not move brk for INTERP-less ET_EXEC
commit
7be3cb019db1cbd5fd5ffe6d64a23fefa4b6f229 upstream.
When brk was moved for binaries without an interpreter, it should have
been limited to ET_DYN only. In other words, the special case was an
ET_DYN that lacks an INTERP, not just an executable that lacks INTERP.
The bug manifested for giant static executables, where the brk would end
up in the middle of the text area on 32-bit architectures.
Reported-and-tested-by: Richard Kojedzinszky <richard@kojedz.in>
Fixes:
bbdc6076d2e5 ("binfmt_elf: move brk out of mmap when doing direct loader exec")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 19 Jun 2019 13:24:17 +0000 (10:24 -0300)]
media: don't drop front-end reference count for ->detach
commit
14e3cdbb00a885eedc95c0cf8eda8fe28d26d6b4 upstream.
A bugfix introduce a link failure in configurations without CONFIG_MODULES:
In file included from drivers/media/usb/dvb-usb/pctv452e.c:20:0:
drivers/media/usb/dvb-usb/pctv452e.c: In function 'pctv452e_frontend_attach':
drivers/media/dvb-frontends/stb0899_drv.h:151:36: error: weak declaration of 'stb0899_attach' being applied to a already existing, static definition
The problem is that the !IS_REACHABLE() declaration of stb0899_attach()
is a 'static inline' definition that clashes with the weak definition.
I further observed that the bugfix was only done for one of the five users
of stb0899_attach(), the other four still have the problem. This reverts
the bugfix and instead addresses the problem by not dropping the reference
count when calling '->detach()', instead we call this function directly
in dvb_frontend_put() before dropping the kref on the front-end.
I first submitted this in early 2018, and after some discussion it
was apparently discarded. While there is a long-term plan in place,
that plan is obviously not nearing completion yet, and the current
kernel is still broken unless this patch is applied.
Link: https://patchwork.kernel.org/patch/10140175/
Link: https://patchwork.linuxtv.org/patch/54831/
Cc: Max Kellermann <max.kellermann@gmail.com>
Cc: Wolfgang Rohdewald <wolfgang@rohdewald.de>
Cc: stable@vger.kernel.org
Fixes:
f686c14364ad ("[media] stb0899: move code to "detach" callback")
Fixes:
6cdeaed3b142 ("media: dvb_usb_pctv452e: module refcount changes were unbalanced")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Sun, 18 Aug 2019 15:03:23 +0000 (12:03 -0300)]
media: sn9c20x: Add MSI MS-1039 laptop to flip_dmi_table
commit
7e0bb5828311f811309bed5749528ca04992af2f upstream.
Like a bunch of other MSI laptops the MS-1039 uses a 0c45:627b
SN9C201 + OV7660 webcam which is mounted upside down.
Add it to the sn9c20x flip_dmi_table to deal with this.
Cc: stable@vger.kernel.org
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Christopherson [Tue, 3 Sep 2019 23:36:45 +0000 (16:36 -0700)]
KVM: x86: Manually calculate reserved bits when loading PDPTRS
commit
16cfacc8085782dab8e365979356ce1ca87fd6cc upstream.
Manually generate the PDPTR reserved bit mask when explicitly loading
PDPTRs. The reserved bits that are being tracked by the MMU reflect the
current paging mode, which is unlikely to be PAE paging in the vast
majority of flows that use load_pdptrs(), e.g. CR0 and CR4 emulation,
__set_sregs(), etc... This can cause KVM to incorrectly signal a bad
PDPTR, or more likely, miss a reserved bit check and subsequently fail
a VM-Enter due to a bad VMCS.GUEST_PDPTR.
Add a one off helper to generate the reserved bits instead of sharing
code across the MMU's calculations and the PDPTR emulation. The PDPTR
reserved bits are basically set in stone, and pushing a helper into
the MMU's calculation adds unnecessary complexity without improving
readability.
Oppurtunistically fix/update the comment for load_pdptrs().
Note, the buggy commit also introduced a deliberate functional change,
"Also remove bit 5-6 from rsvd_bits_mask per latest SDM.", which was
effectively (and correctly) reverted by commit
cd9ae5fe47df ("KVM: x86:
Fix page-tables reserved bits"). A bit of SDM archaeology shows that
the SDM from late 2008 had a bug (likely a copy+paste error) where it
listed bits 6:5 as AVL and A for PDPTEs used for 4k entries but reserved
for 2mb entries. I.e. the SDM contradicted itself, and bits 6:5 are and
always have been reserved.
Fixes:
20c466b56168d ("KVM: Use rsvd_bits_mask in load_pdptrs()")
Cc: stable@vger.kernel.org
Cc: Nadav Amit <nadav.amit@gmail.com>
Reported-by: Doug Reiland <doug.reiland@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Dakinevich [Tue, 27 Aug 2019 13:07:08 +0000 (13:07 +0000)]
KVM: x86: set ctxt->have_exception in x86_decode_insn()
commit
c8848cee74ff05638e913582a476bde879c968ad upstream.
x86_emulate_instruction() takes into account ctxt->have_exception flag
during instruction decoding, but in practice this flag is never set in
x86_decode_insn().
Fixes:
6ea6e84309ca ("KVM: x86: inject exceptions produced by x86_decode_insn")
Cc: stable@vger.kernel.org
Cc: Denis Lunev <den@virtuozzo.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Signed-off-by: Jan Dakinevich <jan.dakinevich@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Dakinevich [Tue, 27 Aug 2019 13:07:09 +0000 (13:07 +0000)]
KVM: x86: always stop emulation on page fault
commit
8530a79c5a9f4e29e6ffb35ec1a79d81f4968ec8 upstream.
inject_emulated_exception() returns true if and only if nested page
fault happens. However, page fault can come from guest page tables
walk, either nested or not nested. In both cases we should stop an
attempt to read under RIP and give guest to step over its own page
fault handler.
This is also visible when an emulated instruction causes a #GP fault
and the VMware backdoor is enabled. To handle the VMware backdoor,
KVM intercepts #GP faults; with only the next patch applied,
x86_emulate_instruction() injects a #GP but returns EMULATE_FAIL
instead of EMULATE_DONE. EMULATE_FAIL causes handle_exception_nmi()
(or gp_interception() for SVM) to re-inject the original #GP because it
thinks emulation failed due to a non-VMware opcode. This patch prevents
the issue as x86_emulate_instruction() will return EMULATE_DONE after
injecting the #GP.
Fixes:
6ea6e84309ca ("KVM: x86: inject exceptions produced by x86_decode_insn")
Cc: stable@vger.kernel.org
Cc: Denis Lunev <den@virtuozzo.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Signed-off-by: Jan Dakinevich <jan.dakinevich@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Thu, 5 Sep 2019 14:44:17 +0000 (16:44 +0200)]
parisc: Disable HP HSC-PCI Cards to prevent kernel crash
commit
5fa1659105fac63e0f3c199b476025c2e04111ce upstream.
The HP Dino PCI controller chip can be used in two variants: as on-board
controller (e.g. in B160L), or on an Add-On card ("Card-Mode") to bridge
PCI components to systems without a PCI bus, e.g. to a HSC/GSC bus. One
such Add-On card is the HP HSC-PCI Card which has one or more DEC Tulip
PCI NIC chips connected to the on-card Dino PCI controller.
Dino in Card-Mode has a big disadvantage: All PCI memory accesses need
to go through the DINO_MEM_DATA register, so Linux drivers will not be
able to use the ioremap() function. Without ioremap() many drivers will
not work, one example is the tulip driver which then simply crashes the
kernel if it tries to access the ports on the HP HSC card.
This patch disables the HP HSC card if it finds one, and as such
fixes the kernel crash on a HP D350/2 machine.
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: Phil Scarr <phil.scarr@pm.me>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Fri, 13 Sep 2019 15:17:11 +0000 (18:17 +0300)]
fuse: fix missing unlock_page in fuse_writepage()
commit
d5880c7a8620290a6c90ced7a0e8bd0ad9419601 upstream.
unlock_page() was missing in case of an already in-flight write against the
same page.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Fixes:
ff17be086477 ("fuse: writepage: skip already in flight")
Cc: <stable@vger.kernel.org> # v3.13
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Madhavan Srinivasan [Tue, 27 Aug 2019 10:16:35 +0000 (15:46 +0530)]
powerpc/imc: Dont create debugfs files for cpu-less nodes
commit
41ba17f20ea835c489e77bd54e2da73184e22060 upstream.
Commit <
684d984038aa> ('powerpc/powernv: Add debugfs interface for
imc-mode and imc') added debugfs interface for the nest imc pmu
devices to support changing of different ucode modes. Primarily adding
this capability for debug. But when doing so, the code did not
consider the case of cpu-less nodes. So when reading the _cmd_ or
_mode_ file of a cpu-less node will create this crash.
Faulting instruction address: 0xc0000000000d0d58
Oops: Kernel access of bad area, sig: 11 [#1]
...
CPU: 67 PID: 5301 Comm: cat Not tainted 5.2.0-rc6-next-
20190627+ #19
NIP:
c0000000000d0d58 LR:
c00000000049aa18 CTR:
c0000000000d0d50
REGS:
c00020194548f9e0 TRAP: 0300 Not tainted (5.2.0-rc6-next-
20190627+)
MSR:
9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR:
28022822 XER:
00000000
CFAR:
c00000000049aa14 DAR:
000000000003fc08 DSISR:
40000000 IRQMASK: 0
...
NIP imc_mem_get+0x8/0x20
LR simple_attr_read+0x118/0x170
Call Trace:
simple_attr_read+0x70/0x170 (unreliable)
debugfs_attr_read+0x6c/0xb0
__vfs_read+0x3c/0x70
vfs_read+0xbc/0x1a0
ksys_read+0x7c/0x140
system_call+0x5c/0x70
Patch fixes the issue with a more robust check for vbase to NULL.
Before patch, ls output for the debugfs imc directory
# ls /sys/kernel/debug/powerpc/imc/
imc_cmd_0 imc_cmd_251 imc_cmd_253 imc_cmd_255 imc_mode_0 imc_mode_251 imc_mode_253 imc_mode_255
imc_cmd_250 imc_cmd_252 imc_cmd_254 imc_cmd_8 imc_mode_250 imc_mode_252 imc_mode_254 imc_mode_8
After patch, ls output for the debugfs imc directory
# ls /sys/kernel/debug/powerpc/imc/
imc_cmd_0 imc_cmd_8 imc_mode_0 imc_mode_8
Actual bug here is that, we have two loops with potentially different
loop counts. That is, in imc_get_mem_addr_nest(), loop count is
obtained from the dt entries. But in case of export_imc_mode_and_cmd(),
loop was based on for_each_nid() count. Patch fixes the loop count in
latter based on the struct mem_info. Ideally it would be better to
have array size in struct imc_pmu.
Fixes:
684d984038aa ('powerpc/powernv: Add debugfs interface for imc-mode and imc')
Reported-by: Qian Cai <cai@lca.pw>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190827101635.6942-1-maddy@linux.vnet.ibm.com
Cc: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ming Lei [Thu, 25 Jul 2019 02:05:00 +0000 (10:05 +0800)]
scsi: implement .cleanup_rq callback
[ Upstream commit
b7e9e1fb7a9227be34ad4a5e778022c3164494cf ]
Implement .cleanup_rq() callback for freeing driver private part
of the request. Then we can avoid to leak this part if the request isn't
completed by SCSI, and freed by blk-mq or upper layer(such as dm-rq) finally.
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: <stable@vger.kernel.org>
Fixes:
396eaf21ee17 ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ming Lei [Thu, 25 Jul 2019 02:04:59 +0000 (10:04 +0800)]
blk-mq: add callback of .cleanup_rq
[ Upstream commit
226b4fc75c78f9c497c5182d939101b260cfb9f3 ]
SCSI maintains its own driver private data hooked off of each SCSI
request, and the pridate data won't be freed after scsi_queue_rq()
returns BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE. An upper layer driver
(e.g. dm-rq) may need to retry these SCSI requests, before SCSI has
fully dispatched them, due to a lower level SCSI driver's resource
limitation identified in scsi_queue_rq(). Currently SCSI's per-request
private data is leaked when the upper layer driver (dm-rq) frees and
then retries these requests in response to BLK_STS_RESOURCE or
BLK_STS_DEV_RESOURCE returns from scsi_queue_rq().
This usecase is so specialized that it doesn't warrant training an
existing blk-mq interface (e.g. blk_mq_free_request) to allow SCSI to
account for freeing its driver private data -- doing so would add an
extra branch for handling a special case that all other consumers of
SCSI (and blk-mq) won't ever need to worry about.
So the most pragmatic way forward is to delegate freeing SCSI driver
private data to the upper layer driver (dm-rq). Do so by adding
new .cleanup_rq callback and calling a new blk_mq_cleanup_rq() method
from dm-rq. A following commit will implement the .cleanup_rq() hook
in scsi_mq_ops.
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: <stable@vger.kernel.org>
Fixes:
396eaf21ee17 ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jan-Marek Glogowski [Sun, 15 Sep 2019 14:57:28 +0000 (16:57 +0200)]
ALSA: hda/realtek - PCI quirk for Medion E4254
[ Upstream commit
bd9c10bc663dd2eaac8fe39dad0f18cd21527446 ]
The laptop has a combined jack to attach headsets on the right.
The BIOS encodes them as two different colored jacks at the front,
but otherwise it seems to be configured ok. But any adaption of
the pins config on its own doesn't fix the jack detection to work
in Linux. Still Windows works correct.
This is somehow fixed by chaining ALC256_FIXUP_ASUS_HEADSET_MODE,
which seems to register the microphone jack as a headset part and
also results in fixing jack sensing, visible in dmesg as:
-snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
+snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ Actually the essential change is the location of the jack; the
driver created "Front Mic Jack" without the matching volume / mute
control element due to its jack location, which confused PA.
-- tiwai ]
Signed-off-by: Jan-Marek Glogowski <glogow@fbihome.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/8f4f9b20-0aeb-f8f1-c02f-fd53c09679f1@fbihome.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yan, Zheng [Tue, 1 Oct 2019 21:24:25 +0000 (17:24 -0400)]
ceph: use ceph_evict_inode to cleanup inode's resource
[ Upstream commit
87bc5b895d94a0f40fe170d4cf5771c8e8f85d15 ]
remove_session_caps() relies on __wait_on_freeing_inode(), to wait for
freeing inode to remove its caps. But VFS wakes freeing inode waiters
before calling destroy_inode().
[ jlayton: mainline moved to ->free_inode before the original patch was
merged. This backport reinstates ceph_destroy_inode and just
has it do the call_rcu call. ]
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/40102
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sasha Levin [Tue, 1 Oct 2019 22:01:07 +0000 (18:01 -0400)]
Revert "ceph: use ceph_evict_inode to cleanup inode's resource"
This reverts commit
812810399999a673d30f9d04d38659030a28051a.
The backport was incorrect and was causing kernel panics. Revert and
re-apply a correct backport from Jeff Layton.
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joonwon Kang [Sat, 27 Jul 2019 15:58:41 +0000 (00:58 +0900)]
randstruct: Check member structs in is_pure_ops_struct()
commit
60f2c82ed20bde57c362e66f796cf9e0e38a6dbb upstream.
While no uses in the kernel triggered this case, it was possible to have
a false negative where a struct contains other structs which contain only
function pointers because of unreachable code in is_pure_ops_struct().
Signed-off-by: Joonwon Kang <kjw1627@gmail.com>
Link: https://lore.kernel.org/r/20190727155841.GA13586@host
Fixes:
313dd1b62921 ("gcc-plugins: Add the randstruct plugin")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ira Weiny [Wed, 11 Sep 2019 11:30:53 +0000 (07:30 -0400)]
IB/hfi1: Define variables as unsigned long to fix KASAN warning
commit
f8659d68e2bee5b86a1beaf7be42d942e1fc81f4 upstream.
Define the working variables to be unsigned long to be compatible with
for_each_set_bit and change types as needed.
While we are at it remove unused variables from a couple of functions.
This was found because of the following KASAN warning:
==================================================================
BUG: KASAN: stack-out-of-bounds in find_first_bit+0x19/0x70
Read of size 8 at addr
ffff888362d778d0 by task kworker/u308:2/1889
CPU: 21 PID: 1889 Comm: kworker/u308:2 Tainted: G W 5.3.0-rc2-mm1+ #2
Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.02.04.0003.
102320141138 10/23/2014
Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
Call Trace:
dump_stack+0x9a/0xf0
? find_first_bit+0x19/0x70
print_address_description+0x6c/0x332
? find_first_bit+0x19/0x70
? find_first_bit+0x19/0x70
__kasan_report.cold.6+0x1a/0x3b
? find_first_bit+0x19/0x70
kasan_report+0xe/0x12
find_first_bit+0x19/0x70
pma_get_opa_portstatus+0x5cc/0xa80 [hfi1]
? ret_from_fork+0x3a/0x50
? pma_get_opa_port_ectrs+0x200/0x200 [hfi1]
? stack_trace_consume_entry+0x80/0x80
hfi1_process_mad+0x39b/0x26c0 [hfi1]
? __lock_acquire+0x65e/0x21b0
? clear_linkup_counters+0xb0/0xb0 [hfi1]
? check_chain_key+0x1d7/0x2e0
? lock_downgrade+0x3a0/0x3a0
? match_held_lock+0x2e/0x250
ib_mad_recv_done+0x698/0x15e0 [ib_core]
? clear_linkup_counters+0xb0/0xb0 [hfi1]
? ib_mad_send_done+0xc80/0xc80 [ib_core]
? mark_held_locks+0x79/0xa0
? _raw_spin_unlock_irqrestore+0x44/0x60
? rvt_poll_cq+0x1e1/0x340 [rdmavt]
__ib_process_cq+0x97/0x100 [ib_core]
ib_cq_poll_work+0x31/0xb0 [ib_core]
process_one_work+0x4ee/0xa00
? pwq_dec_nr_in_flight+0x110/0x110
? do_raw_spin_lock+0x113/0x1d0
worker_thread+0x57/0x5a0
? process_one_work+0xa00/0xa00
kthread+0x1bb/0x1e0
? kthread_create_on_node+0xc0/0xc0
ret_from_fork+0x3a/0x50
The buggy address belongs to the page:
page:
ffffea000d8b5dc0 refcount:0 mapcount:0 mapping:
0000000000000000 index:0x0
flags: 0x17ffffc0000000()
raw:
0017ffffc0000000 0000000000000000 ffffea000d8b5dc8 0000000000000000
raw:
0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
addr
ffff888362d778d0 is located in stack of task kworker/u308:2/1889 at offset 32 in frame:
pma_get_opa_portstatus+0x0/0xa80 [hfi1]
this frame has 1 object:
[32, 36) 'vl_select_mask'
Memory state around the buggy address:
ffff888362d77780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888362d77800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
ffff888362d77880: 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 00 00
^
ffff888362d77900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888362d77980: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2
==================================================================
Cc: <stable@vger.kernel.org>
Fixes:
7724105686e7 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20190911113053.126040.47327.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Danit Goldberg [Mon, 16 Sep 2019 06:48:18 +0000 (09:48 +0300)]
IB/mlx5: Free mpi in mp_slave mode
commit
5d44adebbb7e785939df3db36ac360f5e8b73e44 upstream.
ib_add_slave_port() allocates a multiport struct but never frees it.
Don't leak memory, free the allocated mpi struct during driver unload.
Cc: <stable@vger.kernel.org>
Fixes:
32f69e4be269 ("{net, IB}/mlx5: Manage port association for multiport RoCE")
Link: https://lore.kernel.org/r/20190916064818.19823-3-leon@kernel.org
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vincent Whitchurch [Thu, 11 Jul 2019 14:29:37 +0000 (16:29 +0200)]
printk: Do not lose last line in kmsg buffer dump
commit
c9dccacfccc72c32692eedff4a27a4b0833a2afd upstream.
kmsg_dump_get_buffer() is supposed to select all the youngest log
messages which fit into the provided buffer. It determines the correct
start index by using msg_print_text() with a NULL buffer to calculate
the size of each entry. However, when performing the actual writes,
msg_print_text() only writes the entry to the buffer if the written len
is lesser than the size of the buffer. So if the lengths of the
selected youngest log messages happen to precisely fill up the provided
buffer, the last log message is not included.
We don't want to modify msg_print_text() to fill up the buffer and start
returning a length which is equal to the size of the buffer, since
callers of its other users, such as kmsg_dump_get_line(), depend upon
the current behaviour.
Instead, fix kmsg_dump_get_buffer() to compensate for this.
For example, with the following two final prints:
[ 6.427502]
AAAAAAAAAAAAA
[ 6.427769]
BBBBBBBB12345
A dump of a 64-byte buffer filled by kmsg_dump_get_buffer(), before this
patch:
00000000: 3c 30 3e 5b 20 20 20 20 36 2e 35 32 32 31 39 37 <0>[ 6.522197
00000010: 5d 20 41 41 41 41 41 41 41 41 41 41 41 41 41 0a ]
AAAAAAAAAAAAA.
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
After this patch:
00000000: 3c 30 3e 5b 20 20 20 20 36 2e 34 35 36 36 37 38 <0>[ 6.456678
00000010: 5d 20 42 42 42 42 42 42 42 42 31 32 33 34 35 0a ]
BBBBBBBB12345.
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
Link: http://lkml.kernel.org/r/20190711142937.4083-1-vincent.whitchurch@axis.com
Fixes:
e2ae715d66bf4bec ("kmsg - kmsg_dump() use iterator to receive log buffer content")
To: rostedt@goodmis.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # v3.5+
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quinn Tran [Fri, 26 Jul 2019 16:07:32 +0000 (09:07 -0700)]
scsi: qla2xxx: Fix Relogin to prevent modifying scan_state flag
commit
8b5292bcfcacf15182a77a973a98d310e76fd58b upstream.
Relogin fails to move forward due to scan_state flag indicating device is
not there. Before relogin process, Session delete process accidently
modified the scan_state flag.
[mkp: typos plus corrected Fixes: sha as reported by sfr]
Fixes:
2dee5521028c ("scsi: qla2xxx: Fix login state machine freeze")
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Wilck [Wed, 4 Sep 2019 15:52:29 +0000 (15:52 +0000)]
scsi: scsi_dh_rdac: zero cdb in send_mode_select()
commit
57adf5d4cfd3198aa480e7c94a101fc8c4e6109d upstream.
cdb in send_mode_select() is not zeroed and is only partially filled in
rdac_failover_get(), which leads to some random data getting to the
device. Users have reported storage responding to such commands with
INVALID FIELD IN CDB. Code before commit
327825574132 was not affected, as
it called blk_rq_set_block_pc().
Fix this by zeroing out the cdb first.
Identified & fix proposed by HPE.
Fixes:
327825574132 ("scsi_dh_rdac: switch to scsi_execute_req_flags()")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20190904155205.1666-1-martin.wilck@suse.com
Signed-off-by: Martin Wilck <mwilck@suse.com>
Acked-by: Ales Novak <alnovak@suse.cz>
Reviewed-by: Shane Seymour <shane.seymour@hpe.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Sakamoto [Tue, 10 Sep 2019 13:51:52 +0000 (22:51 +0900)]
ALSA: firewire-tascam: check intermediate state of clock status and retry
commit
e1a00b5b253a4f97216b9a33199a863987075162 upstream.
2 bytes in MSB of register for clock status is zero during intermediate
state after changing status of sampling clock in models of TASCAM FireWire
series. The duration of this state differs depending on cases. During the
state, it's better to retry reading the register for current status of
the clock.
In current implementation, the intermediate state is checked only when
getting current sampling transmission frequency, then retry reading.
This care is required for the other operations to read the register.
This commit moves the codes of check and retry into helper function
commonly used for operations to read the register.
Fixes:
e453df44f0d6 ("ALSA: firewire-tascam: add PCM functionality")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190910135152.29800-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>