platform/kernel/u-boot.git
3 years agobinman: Move the comment for GetFdts() to the base class
Simon Glass [Thu, 18 Mar 2021 07:25:02 +0000 (20:25 +1300)]
binman: Move the comment for GetFdts() to the base class

Like with other methods this comment should be in the base class. Move it.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agobinman: Drop unnecessary field in output_fdt_info
Simon Glass [Thu, 18 Mar 2021 07:25:01 +0000 (20:25 +1300)]
binman: Drop unnecessary field in output_fdt_info

At present we store an entry as the third field in output_fdt_info[].
This is only used to get the type of the entry. Of course multiple entries
may have this same type. Also the entry type is the key to this dict, so
we can use that instead.

Drop the field and update GetUpdateNodes() to suit. Improve the comment for
output_fdt_info a little while here.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agobinman: Use the fake SPL/TPL only if requested
Simon Glass [Thu, 18 Mar 2021 07:25:00 +0000 (20:25 +1300)]
binman: Use the fake SPL/TPL only if requested

At present we always use the main devicetree for SPL/TPL as well when
setting up the state. But this it not needed if there is a real devicetree
for SPL or TPL. In fact it confuses things since we cannot distinguish
between one being provided and using the fake one.

Update the code to create the fakes only when requested. Put the mapping
in a constant so we can use it elsewhere.

Rename 'other_fname' to 'fname' while we are here since there is nothing
'other' about it.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agobinman: Drop unnecessary 'type' property in tests
Simon Glass [Thu, 18 Mar 2021 07:24:59 +0000 (20:24 +1300)]
binman: Drop unnecessary 'type' property in tests

A few tests declare a type when this can be inferred from the node name.
Drop these lines, since it might cause confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agobinman: Add support for u-boot-tpl-bss-bad
Simon Glass [Thu, 18 Mar 2021 07:24:58 +0000 (20:24 +1300)]
binman: Add support for u-boot-tpl-bss-bad

This entry holds the padding between the end of of TPL binary and the
end of BSS. This region must be left empty so that the devicetree can be
appended correctly and remain accessible without interfering with BSS.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agobinman: Add support for u-boot-tpl-nodtb
Simon Glass [Thu, 18 Mar 2021 07:24:57 +0000 (20:24 +1300)]
binman: Add support for u-boot-tpl-nodtb

Allow this entry type to be placed in an image. This is the TPL binary,
without a devicetree appended.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agobinman: Support symbols in u-boot-spl-nodtb
Simon Glass [Thu, 18 Mar 2021 07:24:56 +0000 (20:24 +1300)]
binman: Support symbols in u-boot-spl-nodtb

Since this is an execuable we should be able insert symbol values into it.
Add support for this.

Use common code for this test and the original testSymbols. Use hex
consistently for the values and add some more comments.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agobinman: Correct the documentation for u-boot-spl-bss-pad
Simon Glass [Thu, 18 Mar 2021 07:24:55 +0000 (20:24 +1300)]
binman: Correct the documentation for u-boot-spl-bss-pad

The documentation for this entry indicates that the SPL binary is included
along with the padding. It is not, so update it to correct the error.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agobinman: Tidy up underscores in entry documentation
Simon Glass [Thu, 18 Mar 2021 07:24:54 +0000 (20:24 +1300)]
binman: Tidy up underscores in entry documentation

Several entries currently use an underscore in the entry-type name, but in
fact a hyphen is used. Update the docs to fix this as it might be
confusing.

Also simplify the 'filename' comment and fix the 'operation' typo.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agobinman: Update entry help for files-align
Simon Glass [Thu, 18 Mar 2021 07:24:53 +0000 (20:24 +1300)]
binman: Update entry help for files-align

Regenerate the entry documentation, which step was missed when the
files-align feature was added.

Fixes: 6eb9932668f ("binman: Support alignment of files")

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agobinman: Document ExpandEntries() in the base class
Simon Glass [Thu, 18 Mar 2021 07:24:52 +0000 (20:24 +1300)]
binman: Document ExpandEntries() in the base class

Move the documentation to the base method as it is with other methods.
Also update it a little while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agobinman: Allow extracting to current directory
Simon Glass [Thu, 18 Mar 2021 07:24:51 +0000 (20:24 +1300)]
binman: Allow extracting to current directory

Extracting files to the current directory is not normally a very friendly
thing to do, but it can be warranted, e.g. in a new temporary dir. At
present binman reports an error when such an attempt is made. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agox86: apl: Use read-only SPL and new of-platdata
Simon Glass [Mon, 15 Mar 2021 04:25:52 +0000 (17:25 +1300)]
x86: apl: Use read-only SPL and new of-platdata

With Apollo Lake, SPL is placed in read-only memory. Set this new option
so that OF_PLATDATA_INST can be used.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agox86: coral: Drop TPM and ACPI interrupts from TPL
Simon Glass [Mon, 15 Mar 2021 04:25:51 +0000 (17:25 +1300)]
x86: coral: Drop TPM and ACPI interrupts from TPL

These devices are not actually built in TPL but are currently active in
the TPL devicetree. For of-platdata-inst this means that we will try to
generate devices for them, which fails.

Update them to be active only in U-Boot proper.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agox86: coral: Drop ACPI properties from of-platdata
Simon Glass [Mon, 15 Mar 2021 04:25:50 +0000 (17:25 +1300)]
x86: coral: Drop ACPI properties from of-platdata

We don't use these in TPL or SPL, so drop them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agox86: Don't include reset driver in SPL
Simon Glass [Mon, 15 Mar 2021 04:25:49 +0000 (17:25 +1300)]
x86: Don't include reset driver in SPL

We don't normally need this driver in TPL/SPL, so drop it for now. It can
be enabled by individual boards if needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agox86: Support a fake PCI device with of-platdata-inst
Simon Glass [Mon, 15 Mar 2021 04:25:48 +0000 (17:25 +1300)]
x86: Support a fake PCI device with of-platdata-inst

With TPL we don't need full PCI support and it adds to code size. Instead,
a simple_bus driver is good enough to be able to read and write the PCI
config and do a little basic setup.

So at present there are two drivers in U-Boot called pci_x86. One is in
UCLASS_PCI, used in SPL and U-Boot proper. The other is in
UCLASS_SIMPLE_BUS and used only in TPL.

Add a tag to tell dtoc about this, so it knows which one to use when
generating the devices and uclasses.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agox86: itss: Tidy up bind() for of-platdata-inst
Simon Glass [Mon, 15 Mar 2021 04:25:47 +0000 (17:25 +1300)]
x86: itss: Tidy up bind() for of-platdata-inst

With the standard of-platdata we must fix up driver_data manually. With
of-platadata-inst this is not necessary, since it is added to the device
by dtoc.

Update the code to handle this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agox86: apl: Tell of-platdata about a required header file
Simon Glass [Mon, 15 Mar 2021 04:25:46 +0000 (17:25 +1300)]
x86: apl: Tell of-platdata about a required header file

This enum is needed to generate build-time devices. Tell dtoc where to
find the header, to avoid compile errors in the generated code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agox86: apl: Fix the header order in pmc
Simon Glass [Mon, 15 Mar 2021 04:25:45 +0000 (17:25 +1300)]
x86: apl: Fix the header order in pmc

The dm.h header should come first. In fact it needs to, since otherwise
the driver model definitions are not available to dt-structs.h

Fix this, since it causes problems with OF_PLATDATA_INST.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agox86: Define a region for device priv/plat data
Simon Glass [Mon, 15 Mar 2021 04:25:44 +0000 (17:25 +1300)]
x86: Define a region for device priv/plat data

Collect this together in one place, so driver model can access set it up
in a new place if needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodm: doc: Add documentation for of-platdata-inst
Simon Glass [Mon, 15 Mar 2021 04:25:43 +0000 (17:25 +1300)]
dm: doc: Add documentation for of-platdata-inst

Add a description of the new features, along with internal technical
documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodm: doc: Tidy up of-platdata docs
Simon Glass [Mon, 15 Mar 2021 04:25:42 +0000 (17:25 +1300)]
dm: doc: Tidy up of-platdata docs

This doc has a few pieces that are out-of-date. Fix these. Also we have
started to use 'devicetree' instead of 'device tree' or 'device-tree'
since it is easier to see as a single term, so replace all ocurrences
accordingly.

Also move the caveats to the end, since this is a fairly solid part of
U-Boot now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodm: core: Add warnings to private / platform setters
Simon Glass [Mon, 15 Mar 2021 04:25:41 +0000 (17:25 +1300)]
dm: core: Add warnings to private / platform setters

Add a warning to each of these functions so that people do not attempt to
use them outside driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodm: core: Use separate priv/plat data region
Simon Glass [Mon, 15 Mar 2021 04:25:40 +0000 (17:25 +1300)]
dm: core: Use separate priv/plat data region

Make use of the new priv/plat data region if enabled. This is implemented
as a simple offset from the position set up by dtoc to the new position.

So long as all access goes through dm_priv_to_rw() this is safe.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agosandbox: Define a region for device priv/plat data
Simon Glass [Mon, 15 Mar 2021 04:25:39 +0000 (17:25 +1300)]
sandbox: Define a region for device priv/plat data

Collect this together in one place, so driver model can access set it up
in a new place if needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodm: core: Allow storing priv/plat data separately
Simon Glass [Mon, 15 Mar 2021 04:25:38 +0000 (17:25 +1300)]
dm: core: Allow storing priv/plat data separately

At present the device priv/data data allocated by dtoc is stored in the
data section along with other variables. On some platforms it is better
to allocate space for it separately, e.g. if SPL is running from read-only
memory.

Create a new space with the same size as that allocated by dtoc, ready for
use.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodm: core: Move flags to device-runtime info
Simon Glass [Mon, 15 Mar 2021 04:25:37 +0000 (17:25 +1300)]
dm: core: Move flags to device-runtime info

When of-platdata-inst is active, use the flags in the new udevice_rt
table, dropping them from the main struct udevice. This ensures that the
latter is not updated at runtime.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodm: core: Create a struct for device runtime info
Simon Glass [Mon, 15 Mar 2021 04:25:36 +0000 (17:25 +1300)]
dm: core: Create a struct for device runtime info

At present when driver model needs to change a device it simply updates
the struct udevice structure. But with of-platdata-inst most of the fields
are not modified at runtime. In fact, typically only the flags need to
change.

For systems running SPL from read-only memory it is convenient to separate
out the runtime information, so that the devices don't need to be copied
before being used.

Create a new udevice_rt table, similar to the existing driver_rt. For now
it just holds the flags, although they are not used in this patch.

Add a new Kconfig for the driver_rt data, since this is not needed when
of-platdata-inst is used.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodm: core: Add an option to support SPL in read-only memory
Simon Glass [Mon, 15 Mar 2021 04:25:35 +0000 (17:25 +1300)]
dm: core: Add an option to support SPL in read-only memory

Some systems (e.g. x86 APL) run SPL from read-only memory. The device
instances created by dtoc are therefore not writeable. To make things work
we would need to copy the devices to read/write memory.

To avoid this, add an option to use a separate runtime struct for devices,
just as is done for drivers. This can be used to hold information that
changes at runtime, avoiding the need for a copy.

Also add a Kconfig option for read-only SPL, which selects this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoazure/gitlab: Add tests for sandbox_noinst
Simon Glass [Mon, 15 Mar 2021 04:25:34 +0000 (17:25 +1300)]
azure/gitlab: Add tests for sandbox_noinst

Add this new board to the test plans. Travis-CI is left out, since it is
being removed soon due to lack of capacity.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agotest: Run sandbox_spl tests on sandbox_noinst
Simon Glass [Mon, 15 Mar 2021 04:25:33 +0000 (17:25 +1300)]
test: Run sandbox_spl tests on sandbox_noinst

Run the tests on this build too, to prevent regressions.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agosandbox: Create a new sandbox_noinst build
Simon Glass [Mon, 15 Mar 2021 04:25:32 +0000 (17:25 +1300)]
sandbox: Create a new sandbox_noinst build

Move sandbox_spl over to use OF_PLATDATA_INST. Create a new board to
test the case when this is not enabled, since we will be keeping that
code around for several months and want to avoid regressions.

Skip the dm_test_of_plat_dev() test since driver info is not available
for OF_PLATDATA_INST.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoRevert "sandbox: Disable I2C emulators in SPL"
Simon Glass [Mon, 15 Mar 2021 04:25:31 +0000 (17:25 +1300)]
Revert "sandbox: Disable I2C emulators in SPL"

With recent changes this can be supported again. Add it back.

This reverts commit d85f2c4f2970d0ec2f5f075de734afd11200d153.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agosandbox: i2c: Support i2c emulation with of-platdata
Simon Glass [Mon, 15 Mar 2021 04:25:30 +0000 (17:25 +1300)]
sandbox: i2c: Support i2c emulation with of-platdata

At present the i2c emulators require access to the devicetree, which is
not possible (by design) with of-platdata.

Add a way for drivers to record the of-platdata index of their emulator,
so that we can still find the emulator.

This allows i2c emulation to work with of-platdata.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agosandbox_spl: Increase SPL malloc() size
Simon Glass [Mon, 15 Mar 2021 04:25:29 +0000 (17:25 +1300)]
sandbox_spl: Increase SPL malloc() size

The test framework reinits driver model tests before running each test.
Since malloc_simple does not support free(), this eventually runs out of
memory.

Fix it for now by increasing the space to 32KB.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
3 years agodm: Rename device_get_by_driver_info_idx()
Simon Glass [Mon, 15 Mar 2021 04:25:28 +0000 (17:25 +1300)]
dm: Rename device_get_by_driver_info_idx()

This function finds a device by its driver_info index. With
of-platdata-inst we do not use driver_info, but instead instantiate
udevice records at build-time.

However the semantics of using the function are the same in each case:
the caller provides an index and gets back a device.

So rename the function to device_get_by_ofplat_idx(), so that it can be
used for both situations. The caller does not really need to worry about
the details.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agosandbox: i2c: Move platdata structs to header files
Simon Glass [Mon, 15 Mar 2021 04:25:27 +0000 (17:25 +1300)]
sandbox: i2c: Move platdata structs to header files

At present the structs used by these drivers are declared in the C files
and so are not accessible to dtoc. Move them to header files, as required.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodm: core: Drop uclass_find_device_by_phandle() with of-platdata
Simon Glass [Mon, 15 Mar 2021 04:25:26 +0000 (17:25 +1300)]
dm: core: Drop uclass_find_device_by_phandle() with of-platdata

At present this function is included in the build but with of-platdata it
only services to produce a confusing link error complaining about a call
to dev_read_u32_default().

Drop it so that any call to uclass_find_device_by_phandle() is flagged as
an error, making it easier to see what is going on.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodm: core: Drop device_get_by_driver_info()
Simon Glass [Mon, 15 Mar 2021 04:25:25 +0000 (17:25 +1300)]
dm: core: Drop device_get_by_driver_info()

This function is now only used in a test. Drop it. Also drop
DM_DRVINFO_GET() which was the only purpose for having the function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoclk: sandbox: Create a special fixed-rate driver
Simon Glass [Mon, 15 Mar 2021 04:25:24 +0000 (17:25 +1300)]
clk: sandbox: Create a special fixed-rate driver

Create a version of this driver for sandbox so that it can use the
of-platdata struct.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoclk: fixed-rate: Export driver parts for OF_PLATDATA_INST
Simon Glass [Mon, 15 Mar 2021 04:25:23 +0000 (17:25 +1300)]
clk: fixed-rate: Export driver parts for OF_PLATDATA_INST

We need to allow SoCs to create their own drivers for this so that they
can use their own of-platdata structs. To minimise code duplication,
export the driver operations and the ofdata_to_plat() setup function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoclk: sandbox: Move priv/plat data to a header file
Simon Glass [Mon, 15 Mar 2021 04:25:22 +0000 (17:25 +1300)]
clk: sandbox: Move priv/plat data to a header file

At present the structs used by this driver are not accessible outside it,
so cannot be used with OF_PLATDATA_INST. Move them to a header file to
fix this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodm: test: Avoid destroying uclasses with of-platdata-inst
Simon Glass [Mon, 15 Mar 2021 04:25:21 +0000 (17:25 +1300)]
dm: test: Avoid destroying uclasses with of-platdata-inst

It is not possible to destroy the uclasses when they are created at
build time. Skip this step so that SPL test can complete successfully.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodm: core: Include dt-decl.h automatically
Simon Glass [Mon, 15 Mar 2021 04:25:20 +0000 (17:25 +1300)]
dm: core: Include dt-decl.h automatically

When dt-structs.h is used, include the dt-decl.h header as well, so that
these declarations are available.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoMakefile: Remove old of-platdata files before regenerating
Simon Glass [Wed, 24 Mar 2021 17:40:53 +0000 (06:40 +1300)]
Makefile: Remove old of-platdata files before regenerating

Which files we generate depends on the setting of OF_PLATDATA_INST in the
build. This might change between builds, but the build directory may be
reused.

Leaving old files around is confusing and switching the OF_PLATDATA_INST
setting does not necessarily regenerate the files, e.g. if the devicetree
has not changed.

Remove all the files before regenerating new ones.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoMakefile: Use a variable for generated of-platdata headers
Simon Glass [Wed, 24 Mar 2021 17:40:52 +0000 (06:40 +1300)]
Makefile: Use a variable for generated of-platdata headers

There are actually two generated files but only one is currently mentioned
in the Makefile as a dependency. Put them both in a Makefile variable and
use that instead, to avoid inconsistency.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Only generate the required files
Simon Glass [Wed, 24 Mar 2021 17:40:51 +0000 (06:40 +1300)]
dtoc: Only generate the required files

At present all possible files are generated, even if some of them just
have a header and an empty body. It is better to generate only the files
that are needed, so that the two types of build (based on the setting of
OF_PLATDATA_INST) can be mutually exclusive.

This is intended to fix a strange problem sometimes found with CI:

   Building current source for 1 boards (1 thread, 40 jobs per thread)
      sandbox:  +   sandbox_spl
   +drivers/built-in.o: In function `dm_setup_inst':
   +drivers/core/root.c:135: undefined reference to
   `_u_boot_list_2_udevice_2_root'
   +dts/dt-uclass.o:(.u_boot_list_2_uclass_2_serial+0x10): undefined
   reference to `_u_boot_list_2_udevice_2_serial'
   ...

This likely happens when switching from !OF_PLATDATA_INST to
OF_PLATDATA_INST since running 'make xxx_defconfig" does not currently
cause any change in which files are generated. With !OF_PLATDATA_INST
the dt-device.c file has no declarations and this is assumed to be the
starting state. The error above seems to indicate that, after changing
to OF_PLATDATA_INST, the dt-uclass.c file is regenerated but the
dt-device.c files is not. This does not seem possible from the relevant
Makefile.spl rule:

   u-boot-spl-platdata := $(obj)/dts/dt-plat.o $(obj)/dts/dt-uclass.o
$(obj)/dts/dt-device.o

   cmd_dtoc = $(DTOC_ARGS) -c $(obj)/dts -C include/generated all

   include/generated/dt-structs-gen.h $(u-boot-spl-platdata_c) &: \
$(obj)/$(SPL_BIN).dtb
@[ -d $(obj)/dts ] || mkdir -p $(obj)/dts
$(call if_changed,dtoc)

It seems that this cannot regenerate dt-uclass.c without dt-device.c since
'dtoc all' is used. So here the trail ends for now.

In any case it seems better to generate files that are uses and not bother
with those that serve no purpose. So update dtoc to do this automatically.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoMakefile: Depend only on required of-platdata files
Simon Glass [Wed, 24 Mar 2021 17:40:50 +0000 (06:40 +1300)]
Makefile: Depend only on required of-platdata files

When OF_PLATDATA_INST is enabled, we need dt-uclass.c and dt-device.c for
the build to work. When OF_PLATDATA_INST is not enabled, we only need
dt-plat.c

Update the Makefile rules to indicate this.

At present all files are generated and compiled regardless of which are
actually needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoMakefile: Avoid running dtoc every time
Simon Glass [Wed, 24 Mar 2021 17:40:49 +0000 (06:40 +1300)]
Makefile: Avoid running dtoc every time

Since the dst_dir rule always runs, it causes a rebuild of the of-platdata
files even if not needed.

Create the directory inside the rule instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agolibfdt: Tidy up pylibfdt build rule
Simon Glass [Wed, 24 Mar 2021 17:40:48 +0000 (06:40 +1300)]
libfdt: Tidy up pylibfdt build rule

At present the build rule for pylibfdt depends on _libfdt.so but modern
Python versions add a different suffix to the output file, resulting in
something like _libfdt.cpython-38-x86_64-linux-gnu.so

The result is that pylibfdt is rebuilt every time.

Rename the file the standard name so that the rule works correctly. Also
add libfdt.py to the dependencies, so that file is always created if
missing.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodm: Add the new dtoc-generated files to the build
Simon Glass [Mon, 15 Mar 2021 04:25:19 +0000 (17:25 +1300)]
dm: Add the new dtoc-generated files to the build

Now that dtoc generates some new C files, add these to the build so that
the instantiated devices and uclasses can be used.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodm: core: Skip adding uclasses with OF_PLATDATA_INST
Simon Glass [Mon, 15 Mar 2021 04:25:18 +0000 (17:25 +1300)]
dm: core: Skip adding uclasses with OF_PLATDATA_INST

There is no need to ever add new uclasses since these are set up at build
time. Update the code to return an error if this is attempted.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodm: core: Set up driver model for OF_PLATDATA_INST
Simon Glass [Mon, 15 Mar 2021 04:25:17 +0000 (17:25 +1300)]
dm: core: Set up driver model for OF_PLATDATA_INST

With this we don't need to scan and bind drivers, not even the root
device. We just need to locate the root device that was set up at build
time, then set our root in global_data to point to it.

Update the code to handle this case.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodm: core: Adjust uclass setup with of-platdata
Simon Glass [Mon, 15 Mar 2021 04:25:16 +0000 (17:25 +1300)]
dm: core: Adjust uclass setup with of-platdata

When OF_PLATDATA_INST is enabled we don't need to create the uclass list.
Instead we just need to point to the existing list. Update the code
accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodm: core: Allow dropping run-time binding of devices
Simon Glass [Mon, 15 Mar 2021 04:25:15 +0000 (17:25 +1300)]
dm: core: Allow dropping run-time binding of devices

With OF_PLATDATA_INST devices are bound at build time. We should not need
binding of devices at runtime in most cases. However it is inflexible to
absolutely prohibit it, so add an option to control this.

Update the driver model core so that it does not bind devices. Update
device_bind() to return an error if called.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodm: core: Add macros to access the new linker lists
Simon Glass [Mon, 15 Mar 2021 04:25:14 +0000 (17:25 +1300)]
dm: core: Add macros to access the new linker lists

Add macros which work with instantiated devices and uclasses, as created
at build time by dtoc. Include variants that can be used in data
structures.

These are mostly used by dtoc but it is worth documenting them fully for
the occasional case where they might come up in user code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agolinker_lists: Allow use in data structures
Simon Glass [Mon, 15 Mar 2021 04:25:13 +0000 (17:25 +1300)]
linker_lists: Allow use in data structures

At present linker lists are designed for use in code. They make use of
statements within expressions ({...}), for example.

It is possible to generate a reference to a linker_list entry that can
be used in data structures, where such features are not permitted. It
requires that the reference first be declared as extern. In other
words the existing macro needs to be split into two parts.

Add new macros to support this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agosandbox: Drop debug message in os_spl_to_uboot()
Simon Glass [Mon, 15 Mar 2021 04:25:12 +0000 (17:25 +1300)]
sandbox: Drop debug message in os_spl_to_uboot()

This is not needed in normal operation. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
3 years agodtoc: Drop use of DECL() macros
Simon Glass [Mon, 15 Mar 2021 04:25:11 +0000 (17:25 +1300)]
dtoc: Drop use of DECL() macros

We can use extern instead, so let's drop these macros. It adds one more
thing to learn about and doesn't make the code any clearer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agobus: ti-sysc: change in a normal driver
Dario Binacchi [Tue, 16 Mar 2021 20:51:44 +0000 (21:51 +0100)]
bus: ti-sysc: change in a normal driver

The module defines a duplicate uclass driver for UCLASS_SIMPLE_BUS, but
it is not allowed. This breaks of-platdata and makes the result
non-deterministic.

The driver does not need to be an uclass driver, so lets remove it. I
had turned it into an uclass driver because I thought wrongly it had to
call the dm_scan_fdt_dev routine to work properly, but some tests on the
board have shown otherwise.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Generate device instances
Simon Glass [Wed, 3 Feb 2021 13:01:21 +0000 (06:01 -0700)]
dtoc: Generate device instances

Add support for generating a file containing udevice instances. This
avoids the need to create these at run time.

Update a test uclass to include a 'per_device_plat_auto' member, to
increase test coverage.

Add another tab to the driver_info output so it lines up nicely like the
device-instance output.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Generate uclass devices
Simon Glass [Wed, 3 Feb 2021 13:01:20 +0000 (06:01 -0700)]
dtoc: Generate uclass devices

Add support for generating a file containing uclass instances. This avoids
the need to create these at run time.

Update a test uclass to include a 'priv_auto' member, to increase test
coverage.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Generate a summary in the dt-plat.c file
Simon Glass [Wed, 3 Feb 2021 13:01:19 +0000 (06:01 -0700)]
dtoc: Generate a summary in the dt-plat.c file

Add a summary to the top of the generated code, to make it easier to see
what the file contains.

Also add a tab to .plat so that its value lines up with the others.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Tidy up the list of supported phandle properties
Simon Glass [Wed, 3 Feb 2021 13:01:18 +0000 (06:01 -0700)]
dtoc: Tidy up the list of supported phandle properties

For now dtoc only supports a hard-coded list of phandle properties, to
avoid any situation where it makes a mistake in its determination.

Make this into a constant dict, recording both the phandle property name
and the associated #cells property in the target node. This makes it
easier to find and modify.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agosandbox: i2c: Rename driver names to work with of-platdata
Simon Glass [Wed, 3 Feb 2021 13:01:17 +0000 (06:01 -0700)]
sandbox: i2c: Rename driver names to work with of-platdata

Some of these do not follow the rules. Make sure the driver name matches
the compatible string in all cases.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agosandbox: Make sandbox,emul more conventional
Simon Glass [Wed, 3 Feb 2021 13:01:16 +0000 (06:01 -0700)]
sandbox: Make sandbox,emul more conventional

At present this property is a phandle but does not have a #xxx-cells
property to match it. Add one so that is works the same as gpio and clock
phandles.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Don't generate platform data with instantiation
Simon Glass [Wed, 3 Feb 2021 13:01:15 +0000 (06:01 -0700)]
dtoc: Don't generate platform data with instantiation

This file is not used when instantiating devices. Update dtoc to skip
generating its contents and just add a comment instead.

Also it is useful to see the driver name and parent for each device.
Update the file to show that information, to avoid updating the same
tests twice.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Add support for decl file
Simon Glass [Wed, 3 Feb 2021 13:01:14 +0000 (06:01 -0700)]
dtoc: Add support for decl file

Add an option to generate the declaration file, which declares all
drivers and uclasses, so references can be used in the code.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodm: of-platadata: Add option for device instantiation
Simon Glass [Wed, 3 Feb 2021 13:01:13 +0000 (06:01 -0700)]
dm: of-platadata: Add option for device instantiation

Add Kconfig options to support build-time device instantiation. When
fully implemented, this will allow dtoc to create U-Boot devices (i.e.
struct udevice records) at build time, thus reducing code space in
SPL.

For now this defaults to off, but will be enabled when the rest of
the implementation is in place.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Add an option for device instantiation
Simon Glass [Wed, 3 Feb 2021 13:01:12 +0000 (06:01 -0700)]
dtoc: Add an option for device instantiation

Add an option to instantiate devices at build time. For now this just
parses the option and sets up a few parameters.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Support processing the root node
Simon Glass [Wed, 3 Feb 2021 13:01:11 +0000 (06:01 -0700)]
dtoc: Support processing the root node

The device for the root node is normally bound by driver model on init.
With devices being instantiated at build time, we must handle the root
device also.

Add support for processing the root node, which may not have a compatible
string.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Set up the uclasses that are used
Simon Glass [Wed, 3 Feb 2021 13:01:10 +0000 (06:01 -0700)]
dtoc: Set up the uclasses that are used

We only care about uclasses that are actually used. This is determined by
the drivers that use them. Check all the used drivers and build a list of
'valid' uclasses.

Also add references to the uclasses so we can generate C code that uses
them. Attach a uclass to each valid driver.

For the tests, now that we have uclasses we must create an explicit test
for the case where a node does not have one. This should only happen if
the source code does not build, or the source-code scanning fails to find
it.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Assign a sequence number to each node
Simon Glass [Wed, 3 Feb 2021 13:01:09 +0000 (06:01 -0700)]
dtoc: Assign a sequence number to each node

Now that we have the alias information we can assign a sequence number
to each device in the uclass. Store this in the node associated with each
device.

This requires renaming the sandbox test drivers to have the right name.
Note that test coverage is broken with this patch, but fixed in the next
one.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Detect drivers only at the start of start of line
Simon Glass [Wed, 3 Feb 2021 13:01:08 +0000 (06:01 -0700)]
dtoc: Detect drivers only at the start of start of line

If a driver declaration is included in a comment, dtoc currently gets
confused. Update the parser to only consider declarations that begin at
the start of a line. Since multi-line comments begin with an asterisk,
this avoids the problem.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Read aliases for uclasses
Simon Glass [Wed, 3 Feb 2021 13:01:07 +0000 (06:01 -0700)]
dtoc: Read aliases for uclasses

Scan the aliases in the device tree to establish the number of devices
within each uclass, and the sequence number of each.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Warn of duplicate drivers
Simon Glass [Wed, 3 Feb 2021 13:01:06 +0000 (06:01 -0700)]
dtoc: Warn of duplicate drivers

If drivers have the same name then we cannot distinguish them. This only
matters if the driver is actually used by dtoc, but in that case, issue
a warning.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Process driver aliases along with drivers
Simon Glass [Wed, 3 Feb 2021 13:01:05 +0000 (06:01 -0700)]
dtoc: Process driver aliases along with drivers

Instead of using a separate step for this processing, handle it while
scanning its associated driver. This allows us to drop the code coverage
exception in this case.

Note that only files containing drivers are scanned by dtoc, so aliases
declared in a file that doesn't hold a driver will not be noticed. It
would be confusing to put them anywhere other than in the driver that they
relate to, but update the documentation to say this explicitly, just in
case.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Support headers needed for drivers
Simon Glass [Wed, 3 Feb 2021 13:01:04 +0000 (06:01 -0700)]
dtoc: Support headers needed for drivers

Typically dtoc can detect the header file needed for a driver by looking
for the structs that it uses. For example, if a driver as a .priv_auto
that uses 'struct serial_priv', then dtoc can search header files for the
definition of that struct and use the file.

In some cases, enums are used in drivers, typically with the .data field
of struct udevice_id. Since dtoc does not support searching for these,
add a way to tell dtoc which header to use. This works as a macro included
in the driver definition.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoMakefile: Pass the U-Boot phase to dtoc
Simon Glass [Wed, 3 Feb 2021 13:01:03 +0000 (06:01 -0700)]
Makefile: Pass the U-Boot phase to dtoc

Pass the U-Boot phase as a parameter so dtoc can use it. At present it is
ether "spl" or "tpl".

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Support tracking the phase of U-Boot
Simon Glass [Wed, 3 Feb 2021 13:01:02 +0000 (06:01 -0700)]
dtoc: Support tracking the phase of U-Boot

U-Boot operates in several phases, typically TPL, SPL and U-Boot proper.
The latter does not use dtoc.

In some rare cases different drivers are used for two phases. For example,
in TPL it may not be necessary to use the full PCI subsystem, so a simple
driver can be used instead.

This works in the build system simply by compiling in one driver or the
other (e.g. PCI driver + uclass for SPL; simple_bus for TPL). But dtoc has
no way of knowing which code is compiled in for which phase, since it does
not inspect Makefiles or dependency graphs.

So to make this work for dtoc, we need to be able to explicitly mark
drivers with their phase. This is done by adding an empty macro to the
driver. Add support for this in dtoc.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Track nodes which are actually used
Simon Glass [Wed, 3 Feb 2021 13:01:01 +0000 (06:01 -0700)]
dtoc: Track nodes which are actually used

Mark all nodes that are actually used, so we can perform extra checks on
them.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Process nodes to set up required properties
Simon Glass [Wed, 3 Feb 2021 13:01:00 +0000 (06:01 -0700)]
dtoc: Process nodes to set up required properties

Add logic to assign property values to nodes as required by dtoc. The
references allow nodes to refer to each other in C code. The macros used
by dtoc are not yet defined in driver model. They will be added along
with the actual driver model implementation.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Make use of node properties
Simon Glass [Wed, 3 Feb 2021 13:00:59 +0000 (06:00 -0700)]
dtoc: Make use of node properties

Now that we have these available, use them instead of recalculating
things each time.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Add some extra properties to nodes
Simon Glass [Wed, 3 Feb 2021 13:00:58 +0000 (06:00 -0700)]
dtoc: Add some extra properties to nodes

It is convenient to attach drivers, etc. to nodes so that we can use the
Node object as the main data structure in this module.

Add a function which adds the new properties, along with documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Rename sandbox_i2c_test and sandbox_pmic_test
Simon Glass [Wed, 3 Feb 2021 13:00:57 +0000 (06:00 -0700)]
dtoc: Rename sandbox_i2c_test and sandbox_pmic_test

These have '_test' suffixes which are not present on the drivers in the
source code. Drop the suffixes to avoid a mismatch when scanning.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Move test files into a test/ directory
Simon Glass [Wed, 3 Feb 2021 13:00:56 +0000 (06:00 -0700)]
dtoc: Move test files into a test/ directory

It is confusing to have the test files in the same places as the
implementation. Move them into a separate directory.

Add a helper function for test_dtoc, to avoid repeating the same
path.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Support scanning of structs in header files
Simon Glass [Wed, 3 Feb 2021 13:00:55 +0000 (06:00 -0700)]
dtoc: Support scanning of structs in header files

Drivers can have private / platform data contained in structs and these
struct definitions are generally kept in header files. In order to
generate build-time devices, dtoc needs to generate code that declares
the data contained in those structs. This generated code must include the
relevant header file, to avoid a build error.

We need a way for dtoc to scan header files for struct definitions. Then,
when it wants to generate code that uses a struct, it can make sure it
includes the correct header file, first.

Add a parser for struct information, similar to drivers. Keep a dict of
the structs that were found.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Support scanning of uclasses
Simon Glass [Wed, 3 Feb 2021 13:00:54 +0000 (06:00 -0700)]
dtoc: Support scanning of uclasses

Uclasses can have per-device private / platform data so dtoc needs to
scan these drivers. This allows it to find out the size of this data so
it can be allocated a build time.

Add a parser for uclass information, similar to drivers. Keep a dict of
the uclasses that were found.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Collect priv/plat struct info from drivers
Simon Glass [Wed, 3 Feb 2021 13:00:53 +0000 (06:00 -0700)]
dtoc: Collect priv/plat struct info from drivers

In order to output variables to hold the priv/plat information used by
each device, dtoc needs to know the struct for each. With this, it can
declare this at build time:

   u8 xxx_priv [sizeof(struct <name>)];

Collect the various struct names from the drivers.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Ignore unwanted files when scanning for drivers
Simon Glass [Wed, 3 Feb 2021 13:00:52 +0000 (06:00 -0700)]
dtoc: Ignore unwanted files when scanning for drivers

We should ignore anything in the .git directory or any of the
build-sandbox, etc. directories created by 'make check'. These can confuse
dtoc. Update the code to ignore these.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Save scan information across test runs
Simon Glass [Wed, 3 Feb 2021 13:00:51 +0000 (06:00 -0700)]
dtoc: Save scan information across test runs

At present most of the tests scan the U-Boot source tree as part of their
run. This information does not change across tests, so we can save time
by remembering it.

Add a way to set up this information and use it for each test, taking a
copy first, so as not to mess up the original.

This reduces the run time from about 1.6 seconds to 1.5 seconds on my
machine. For code coverage (which cannot run in parallel), it reduces from
33 seconds to 5.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agodtoc: Scan drivers for available information
Simon Glass [Wed, 3 Feb 2021 13:00:50 +0000 (06:00 -0700)]
dtoc: Scan drivers for available information

At present we simply record the name of a driver parsed from its
implementation file. We also need to get the uclass and a few other
things so we can instantiate devices at build time. Add support for
collecting this information. This requires parsing each driver file.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agosandbox: add FAT to the list of usable env drivers
Heinrich Schuchardt [Thu, 4 Mar 2021 18:28:37 +0000 (18:28 +0000)]
sandbox: add FAT to the list of usable env drivers

Add the FAT environment driver to the priority list.

When testing the UEFI sub-system the EFI system partition is formatted with
FAT so it is reasonable to store the environment there.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
3 years agodm: error handling dev_get_dma_range()
Heinrich Schuchardt [Sat, 20 Feb 2021 09:41:22 +0000 (10:41 +0100)]
dm: error handling dev_get_dma_range()

goto after return has not effect. Calling of_node_put() in case of some
errors and not for others is inconsistent.

Fixes: 51bdb50904b ("dm: Introduce xxx_get_dma_range()")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
3 years agosandbox: enable cros-ec-keyb in test.dtb
Heinrich Schuchardt [Thu, 18 Feb 2021 12:01:35 +0000 (13:01 +0100)]
sandbox: enable cros-ec-keyb in test.dtb

Currently keyboard input fails in the GUI window opened by

    ./u-boot -T -l

Add the missing include to test.dts.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
3 years agopatman: Use less for help file, if available
Nicolas Boichat [Wed, 17 Feb 2021 10:41:43 +0000 (18:41 +0800)]
patman: Use less for help file, if available

It's convenient to be able to scroll up in `patman -H`.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
3 years agotest: print_ut: Fix potential build error
Bin Meng [Wed, 17 Feb 2021 09:31:47 +0000 (17:31 +0800)]
test: print_ut: Fix potential build error

This files uses the macro U_BOOT_CMD which is defined in command.h,
but command.h is conditionally included. Fix it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
3 years agotest: cmd: setexpr: Fix a typo
Bin Meng [Wed, 17 Feb 2021 09:04:06 +0000 (17:04 +0800)]
test: cmd: setexpr: Fix a typo

SETEXPR_TEST is for a new setexpr test, not mem.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
3 years agommc: pci: Fix Kconfig dependency
Bin Meng [Mon, 15 Feb 2021 12:01:44 +0000 (20:01 +0800)]
mmc: pci: Fix Kconfig dependency

The PCI MMC driver depends on the generic MMC SDHCI driver,
otherwise it does not compile.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>