lijian [Thu, 10 Jun 2021 03:24:13 +0000 (05:24 +0200)]
media: rc: redrat3: Fix a typo
Change 'an' to 'on'.
Signed-off-by: lijian <lijian@yulong.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
lijian [Thu, 10 Jun 2021 03:15:04 +0000 (05:15 +0200)]
media: rc: streamzap: Removed unnecessary 'return'
Removed unnecessary 'return'.
Signed-off-by: lijian <lijian@yulong.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:45 +0000 (13:23 +0200)]
media: ti-vpe: cal: add embedded data support
Add support for capturing embedded data from the sensor. The only
difference with capturing pixel data and embedded data is that we need
to ensure the PIX PROC is disabled for embedded data so that CAL doesn't
repack the data.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:44 +0000 (13:23 +0200)]
media: ti-vpe: cal: allow more than 1 source pads
CAL RX has a single sink and a single source pad. To support multiple
streams, we will have multiple source pads (up to 8, one for each
CAL context).
Change the driver to allow creating more source pads and change the code
accordingly to handle multiple source pads. We still keep
CAL_CAMERARX_NUM_SOURCE_PADS as 1, and the behavior is unchanged.
Also rename CAL_CAMERARX_PAD_SOURCE to CAL_CAMERARX_PAD_FIRST_SOURCE to
highlight that it's the first source.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:43 +0000 (13:23 +0200)]
media: ti-vpe: cal: add camerarx enable/disable refcounting
The following patches add multistream support and we will have multiple
video devices using the same camerarx instances. Thus we need
enable/disable refcounting for the camerarx.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:42 +0000 (13:23 +0200)]
media: ti-vpe: cal: add camerarx locking
We don't have any locking in camerarx for the subdev ops. We have
managed fine so far without locking, but in the future multiple video
capture devices can use the same camerarx, and locking is a must.
Add a mutex to protect the camerarx subdev ops. Some of the functions
were slightly restructured to make lock handling cleaner.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:41 +0000 (13:23 +0200)]
media: ti-vpe: cal: fix queuing of the initial buffer
When starting streaming the driver currently programs the buffer
address to the CAL base-address register and assigns the buffer pointer
to ctx->dma.pending. This is not correct, as the buffer is not
"pending", but active, and causes the first buffer to be needlessly
written twice.
Fix this by assigning the buffer pointer to ctx->dma.active.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:40 +0000 (13:23 +0200)]
media: ti-vpe: cal: fix ctx uninitialization
Somewhere along the way the context uninitialization has gone a bit odd:
* We have cal_ctx_create() but no matching destroy call, but we still
need to call cal_ctx_v4l2_cleanup() for each context.
* We have cal_media_cleanup() which calls cal_ctx_v4l2_cleanup() for all
contexts, but cal_media_init() is not where the contexts are created.
* The order of uninit steps in cal_remove() is different than the error
handling path in cal_probe().
* cal_probe()'s error handling calls cal_ctx_v4l2_cleanup() for each
context, but also calls cal_media_clean(), doing the same context
cleanup twice.
So fix these, by introducing cal_ctx_destroy(), and using that in
appropriate places instead of calling cal_ctx_v4l2_cleanup() in
cal_media_clean(). Also use normal kzalloc (and kfree) instead of devm
version as we anyway do manual cleanup for each context.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:39 +0000 (13:23 +0200)]
media: ti-vpe: cal: cleanup phy iteration in cal_remove
Most of the driver has moved from ARRAY_SIZE(cal->phy) to
cal->data->num_csi2_phy, but we have one place left in cal_remove. Also,
checking for cal->phy[i] != NULL is not needed as we always have all the
phys instantiated.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:38 +0000 (13:23 +0200)]
media: ti-vpe: cal: support 8 DMA contexts
The current driver only ever needs 2 DMA contexts (one per PHY), but we
need to use more of the 8 contexts to add support for multiple streams.
Change the code so that we allocate DMA contexts as needed, which at
this time is 1 per PHY, but could be up to 8.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:37 +0000 (13:23 +0200)]
media: ti-vpe: cal: remove cal_camerarx->fmtinfo
struct cal_camerarx has fmtinfo field which is used to point to the
current active input format. The only place where the field is used is
cal_camerarx_get_ext_link_freq().
With multiple streams the whole concept of single input format is not
valid anymore, so lets remove the field by looking up the format in
cal_camerarx_get_ext_link_freq(), making it easier to handle the
multistream-case in the following patches.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:36 +0000 (13:23 +0200)]
media: ti-vpe: cal: init ctx->v_fmt correctly in MC mode
CAL driver enumerates mbus codes in the connected subdev to create a
list of supported formats reported to userspace, and initializes
ctx->v_fmt and ctx->fmtinfo to one of those formats.
This works fine for legacy mode, but is not correct for MC mode, and the
list is not even used in MC mode.
Fix this by adding a new function, cal_ctx_v4l2_init_mc_format, which
only initializes ctx->v_fmt and ctx->fmtinfo to a default value.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:35 +0000 (13:23 +0200)]
media: ti-vpe: cal: rename non-MC funcs to cal_legacy_*
To make it more obvious if the function in question is dealing with
media-controller API or the legacy API, rename legacy API functions to
cal_legacy_*.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:34 +0000 (13:23 +0200)]
media: ti-vpe: cal: add mbus_code support to cal_mc_enum_fmt_vid_cap
Commit
e5b6b07a1b45 ("media: v4l2: Extend VIDIOC_ENUM_FMT to support
MC-centric devices") added support to enumerate formats based on
mbus-code.
Add this feature to cal driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:33 +0000 (13:23 +0200)]
media: ti-vpe: cal: fix typo in a comment
Fix a typo in a comment in cal_camerarx_sd_set_fmt().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:32 +0000 (13:23 +0200)]
media: ti-vpe: cal: set field always to V4L2_FIELD_NONE
cal_camerarx_sd_set_fmt() accepts any value for the format field, but
there should be no reason to have any other value accepted than
V4L2_FIELD_NONE. So set the field always to V4L2_FIELD_NONE.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:31 +0000 (13:23 +0200)]
media: ti-vpe: cal: handle cal_ctx_v4l2_register error
cal_async_notifier_complete() doesn't handle errors returned from
cal_ctx_v4l2_register(). Add the error handling.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:30 +0000 (13:23 +0200)]
media: ti-vpe: cal: add vc and datatype fields to cal_ctx
In preparation for supporting multiple virtual channels and datatypes,
add vc and datatype fields to cal_ctx, initialize them to the currently
used values, and use those fields when writing to the register.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:29 +0000 (13:23 +0200)]
media: ti-vpe: cal: add cal_ctx_wr_dma_enable and fix a race
I have not noticed any errors due to this, but the DMA configuration
looks racy. Setting the DMA mode bitfield in CAL_WR_DMA_CTRL supposedly
enables the DMA. However, the driver currently a) continues configuring
the DMA after setting the mode, and b) enables the DMA interrupts only
after setting the mode.
This probably doesn't cause any issues as there should be no data coming
in to the DMA yet, but it's still better to fix this.
Add a new function, cal_ctx_wr_dma_enable(), to set the DMA mode field,
and call that function only after the DMA config and the irq enabling
has been done.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:28 +0000 (13:23 +0200)]
media: ti-vpe: cal: add 'use_pix_proc' field
We already have functions to reserve and release a pix proc unit, but we
always reserve such and the code expects the pix proc unit to be used.
Add a new field, 'use_pix_proc', to indicate if the pix prox unit has
been reserved and should be used. Use the flag to skip programming pix
proc unit when not needed.
Note that we still always set the use_pix_proc flag to true.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:27 +0000 (13:23 +0200)]
media: ti-vpe: cal: allocate pix proc dynamically
CAL has 4 pixel processing units but the units are not needed e.g. for
metadata. As we could be capturing 4 pixel streams and 4 metadata
streams, i.e. using 8 DMA contexts, we cannot assign a pixel processing
unit to every DMA context. Instead we need to reserve a pixel processing
unit only when needed.
Add functions to reserve and release a pix proc unit, and use them in
cal_ctx_prepare/unprepare. Note that for the time being we still always
reserve a pix proc unit.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:26 +0000 (13:23 +0200)]
media: ti-vpe: cal: disable csi2 ctx and pix proc at ctx_stop
Disable CSI2 context and pix proc in cal_ctx_stop() to ensure they are
not used if the same context is used later on a different PHY or without
pix proc.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:25 +0000 (13:23 +0200)]
media: ti-vpe: cal: remove wait when stopping camerarx
Asserting ComplexIO reset seems to affect the HW (ie. asserting reset
will break an active capture), but the RESET_DONE bit never changes to
"reset is ongoing" state. Thus we always get a timeout.
Drop the wait, as it seems to achieve nothing.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:24 +0000 (13:23 +0200)]
media: ti-vpe: cal: catch VC errors
CAL driver currently ignores VC related errors. To help catch error
conditions, enable all the VC error interrupts and handle them in the
interrupt handler by printing an error.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:23 +0000 (13:23 +0200)]
media: ti-vpe: cal: clean up CAL_CSI2_VC_IRQ_* macros
The macros related to CAL_CSI2_VC_IRQ can be handled better by having
the VC number as a macro parameter.
Note that the macros are not used anywhere yet, so no other changes are
needed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:22 +0000 (13:23 +0200)]
media: ti-vpe: cal: rename CAL_HL_IRQ_MASK
CAL_HL_IRQ_MASK macro is used for both WDMA start and end status bits.
For clarity, rename CAL_HL_IRQ_MASK macro to CAL_HL_IRQ_WDMA_END_MASK
and CAL_HL_IRQ_WDMA_START_MASK.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:21 +0000 (13:23 +0200)]
media: ti-vpe: cal: rename cal_ctx->index to dma_ctx
Rename cal_ctx->index to dma_ctx to clarify that the field refers to the
DMA context number.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:20 +0000 (13:23 +0200)]
media: ti-vpe: cal: Add pixel processing context
CAL has 4 pixel processing contexts (PIX PROC) of which the driver
currently uses pix proc 0 for PHY0, and pix proc 1 for PHY1 (as the
driver supports only a single source per PHY).
Add a pix_proc field to cal_ctx to allow us to use different pix proc
contexts in the future
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:19 +0000 (13:23 +0200)]
media: ti-vpe: cal: Add CSI2 context
CAL has 8 CSI2 contexts per PHY, which are used to tag the incoming
data. The current driver only uses the first context, but we need to
support all of them to implement multi-stream support.
Add a csi2_ctx field to cal_ctx, which indicates which of the 8 CSI2
contexts is used for the particular cal_ctx. Also clean up the context
register macros to take the CSI2 context number as a parameter.
Note that before this patch the CSI2 context used for both PHYs was
always 0. This patch always uses cal_ctx index number as the CSI2
context. There is no functional difference, but this approach will work
also in the future when we use more than 1 CSI2 context per PHY.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:18 +0000 (13:23 +0200)]
media: ti-vpe: cal: change index and cport to u8
cal_ctx's index and cport fields are numbers less than 8. In the
following patches we will get a bunch of new fields, all of which are
similar small numbers, so lets change the type to u8.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:17 +0000 (13:23 +0200)]
media: ti-vpe: cal: add cal_ctx_prepare/unprepare
In the following patches we need to do context configuration which might
fail. Add new functions, cal_ctx_prepare and cal_ctx_unprepare, to
handle such configuration.
[hverkuil: fix spurious newline checkpatch warning]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:16 +0000 (13:23 +0200)]
media: ti-vpe: cal: use v4l2_get_link_freq
CAL driver uses V4L2_CID_PIXEL_RATE to get the required pixel rate, and
then changes that value to link rate before configuring the registers.
Rewrite the code to use v4l2_get_link_freq(), which simplifies the code
as we get the link rate directly, and it also adds support for
V4L2_CID_LINK_FREQ.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:15 +0000 (13:23 +0200)]
media: ti-vpe: cal: move global config from cal_ctx_wr_dma_config to runtime resume
For some reason CAL_CTRL is written at the end of cal_ctx_wr_dma_config.
CAL_CTRL is a global (for CAL) register, so it should be independent of
contexts.
Move the code to cal_runtime_resume().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:14 +0000 (13:23 +0200)]
media: ti-vpe: cal: rename "sensor" to "source"
CAL driver uses "sensor" name to refer to the subdev connected to CAL.
As the subdev can also be a bridge, the naming is misleading and might
cause the reader to think it refers to the actual sensor at the end of
the pipeline.
Rename "sensor" to "source".
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:13 +0000 (13:23 +0200)]
media: ti-vpe: cal: remove unused cal_camerarx->dev field
cal_camerarx->dev field is not used, remove it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:12 +0000 (13:23 +0200)]
media: ti-vpe: cal: fix error handling in cal_camerarx_create
cal_camerarx_create() doesn't handle error returned from
cal_camerarx_sd_init_cfg(). Fix this.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomi Valkeinen [Mon, 14 Jun 2021 11:23:11 +0000 (13:23 +0200)]
media: ti-vpe: cal: add g/s_parm for legacy API
v4l2-compliance complains about g/s_parm when using the non-MC API. Fix
it by adding the functions and just call v4l2_s/g_parm_cap for the
phy subdev.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Colin Ian King [Fri, 18 Jun 2021 09:50:20 +0000 (11:50 +0200)]
media: saa7164: remove redundant continue statement
The continue statement at the end of a for-loop has no effect,
remove it.
Addresses-Coverity: ("Continue has no effect")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Yang Yingliang [Wed, 16 Jun 2021 08:36:45 +0000 (10:36 +0200)]
media: saa7134: convert list_for_each to entry variant
Convert list_for_each() to list_for_each_entry() where
applicable.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Herman [Wed, 16 Jun 2021 08:03:16 +0000 (10:03 +0200)]
media: drivers/media/platform/marvell-ccic/mcam-core.c : fix typo 'gettig' > 'getting'
Change 'gettig' into 'getting'.
Signed-off-by: Herman <yanshuaijun@yulong.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Wed, 16 Jun 2021 07:22:20 +0000 (09:22 +0200)]
media: vivid: increase max number of allowed
The max number of allowed logical addresses was set to 1 in
vivid, for no good reason. This prevented testing with multiple
logical addresses for the same CEC device. Increase this number to
CEC_MAX_LOG_ADDRS.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Krzysztof Hałasa [Wed, 16 Jun 2021 05:13:55 +0000 (07:13 +0200)]
media: TDA1997x: enable EDID support
Without this patch, the TDA19971 chip's EDID is inactive.
EDID never worked with this driver, it was all tested with HDMI signal
sources which don't need EDID support.
Signed-off-by: Krzysztof Halasa <khalasa@piap.pl>
Fixes:
9ac0038db9a7 ("media: i2c: Add TDA1997x HDMI receiver driver")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Herman [Tue, 15 Jun 2021 02:06:36 +0000 (04:06 +0200)]
media: drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c : fix typo 'in deed imporant' > 'indeed important'
Change 'imporant' into 'important'.
Signed-off-by: Herman <yanshuaijun@yulong.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Christophe JAILLET [Sun, 13 Jun 2021 15:03:31 +0000 (17:03 +0200)]
media: saa7134: switch from 'pci_' to 'dma_' API
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.
When memory is allocated in 'saa7134_pgtable_alloc()', GFP_KERNEL can be
used because its 4 callers (one function calls it 2 times, so there is
only 3 functions that call it):
.hw_params in a struct snd_pcm_ops (saa7134-alsa.c)
--> snd_card_saa7134_hw_params (saa7134-alsa.c)
--> saa7134_pgtable_alloc
==> .hw_params function can use GFP_KERNEL
saa7134_initdev (saa7134-core.c)
--> saa7134_hwinit1 (saa7134-core.c)
--> saa7134_ts_init1 (saa7134-ts.c)
--> saa7134_pgtable_alloc
==> saa7134_initdev already uses GFP_KERNEL
saa7134_initdev (saa7134-core.c)
--> saa7134_hwinit1 (saa7134-core.c)
--> saa7134_video_init1 (saa7134-video.c)
--> saa7134_pgtable_alloc (called 2 times)
==> saa7134_initdev already uses GFP_KERNEL
and no spin_lock is taken in the between.
@@ @@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@ @@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@ @@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@ @@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
lijian [Fri, 11 Jun 2021 06:28:15 +0000 (08:28 +0200)]
media: i2c: tvp5150: deleted the repeated word
deleted the repeated word 'the' in the comments.
Signed-off-by: lijian <lijian@yulong.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Herman [Thu, 10 Jun 2021 08:38:15 +0000 (10:38 +0200)]
media: drivers/media/platform/davinci/vpfe_capture.c : fix typo Proabably > Probably
Change 'Proabably' into 'Probably'.
Signed-off-by: Herman <yanshuaijun@yulong.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Eugen Hristev [Wed, 9 Jun 2021 13:00:28 +0000 (15:00 +0200)]
media: atmel: atmel-sama5d2-isc: fix YUYV format
SAMA5D2 does not have the YCYC field for the RLP (rounding, limiting,
packaging) module.
The YCYC field is supposed to work with interleaved YUV formats like YUYV.
In SAMA5D2, we have to use YYCC field, which is used for both planar
formats like YUV420 and interleaved formats like YUYV.
Fix the according rlp callback to replace the generic YCYC field (which
makes more sense from a logical point of view) with the required YYCC
field.
Fixes:
debfa496871c ("media: atmel: atmel-isc-base: add support for more formats and additional pipeline modules")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Colin Ian King [Wed, 9 Jun 2021 12:14:08 +0000 (14:14 +0200)]
media: atomisp: remove redundant initialization of variable ret
The variable ret is being initialized with a value that is never read,
it is being updated later on. The assignment is redundant and can be
removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Herman [Wed, 9 Jun 2021 09:53:22 +0000 (11:53 +0200)]
media: drivers/media/usb/gspca: fix typo Fliker -> Flicker
Change 'Fliker' into 'Flicker'.
Signed-off-by: Herman <yanshuaijun@yulong.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Herman [Wed, 9 Jun 2021 03:00:31 +0000 (05:00 +0200)]
media: drivers/media/pci/tw5864/Tw5864-reg.h: fix typo issues
change 'syncrous' into 'synchronous'
Signed-off-by: Herman <yanshuaijun@yulong.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jernej Skrabec [Sun, 6 Jun 2021 08:23:14 +0000 (10:23 +0200)]
media: cedrus: hevc: Add support for multiple slices
Now that segment address is available, support for multi-slice frames
can be easily added.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jernej Skrabec [Sun, 6 Jun 2021 08:23:13 +0000 (10:23 +0200)]
media: hevc: Add segment address field
If HEVC frame consists of multiple slices, segment address has to be
known in order to properly decode it.
Add segment address field to slice parameters.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Mon, 21 Jun 2021 07:24:46 +0000 (09:24 +0200)]
media: ivtv: prevent going past the hw arrays
As warned by smatch:
drivers/media/pci/ivtv/ivtv-i2c.c:245 ivtv_i2c_register() error: buffer overflow 'hw_devicenames' 21 <= 31
drivers/media/pci/ivtv/ivtv-i2c.c:266 ivtv_i2c_register() error: buffer overflow 'hw_addrs' 21 <= 31
drivers/media/pci/ivtv/ivtv-i2c.c:269 ivtv_i2c_register() error: buffer overflow 'hw_addrs' 21 <= 31
drivers/media/pci/ivtv/ivtv-i2c.c:275 ivtv_i2c_register() error: buffer overflow 'hw_addrs' 21 <= 31
drivers/media/pci/ivtv/ivtv-i2c.c:280 ivtv_i2c_register() error: buffer overflow 'hw_addrs' 21 <= 31
drivers/media/pci/ivtv/ivtv-i2c.c:290 ivtv_i2c_register() error: buffer overflow 'hw_addrs' 21 <= 31
The logic at ivtv_i2c_register() could let buffer overflows at
hw_devicenames and hw_addrs arrays.
This won't happen in practice due to a carefully-contructed
logic, but it is not error-prune.
Change the logic in a way that will make clearer that the
I2C hardware flags will affect the size of those two
arrays, and add an explicit check to avoid buffer overflows.
While here, use the bit macro.
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Thu, 17 Jun 2021 12:33:29 +0000 (14:33 +0200)]
media: uvc: don't do DMA on stack
As warned by smatch:
drivers/media/usb/uvc/uvc_v4l2.c:911 uvc_ioctl_g_input() error: doing dma on the stack (&i)
drivers/media/usb/uvc/uvc_v4l2.c:943 uvc_ioctl_s_input() error: doing dma on the stack (&i)
those two functions call uvc_query_ctrl passing a pointer to
a data at the DMA stack. those are used to send URBs via
usb_control_msg(). Using DMA stack is not supported and should
not work anymore on modern Linux versions.
So, use a kmalloc'ed buffer.
Cc: stable@vger.kernel.org # Kernel 4.9 and upper
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Mon, 21 Jun 2021 07:32:25 +0000 (09:32 +0200)]
media: sti: don't copy past the size
The logic at delta_ipc_open() tries to copy past the size of
the name passed to it:
drivers/media/platform/sti/delta/delta-ipc.c:178 delta_ipc_open() error: __memcpy() 'name' too small (17 vs 32)
Basically,this function is called just one with:
ret = delta_ipc_open(pctx, "JPEG_DECODER_HW0", ...);
The string used there has just 17 bytes. Yet, the logic tries
to copy the entire name size (32 bytes), which is plain wrong.
Replace it by strscpy, which is good enough to copy the string,
warranting that this will be NUL-terminated.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Thu, 17 Jun 2021 11:28:57 +0000 (13:28 +0200)]
media: dib8000: rewrite the init prbs logic
The logic at dib8000_get_init_prbs() has a few issues:
1. the tables used there has an extra unused value at the beginning;
2. the dprintk() message doesn't write the right value when
transmission mode is not 8K;
3. the array overflow validation is done by the callers.
Rewrite the code to fix such issues.
This should also shut up those smatch warnings:
drivers/media/dvb-frontends/dib8000.c:2125 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_8k' 14 <= 14
drivers/media/dvb-frontends/dib8000.c:2129 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_2k' 14 <= 14
drivers/media/dvb-frontends/dib8000.c:2131 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_4k' 14 <= 14
drivers/media/dvb-frontends/dib8000.c:2134 dib8000_get_init_prbs() error: buffer overflow 'lut_prbs_8k' 14 <= 14
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ezequiel Garcia [Sat, 19 Jun 2021 17:24:23 +0000 (19:24 +0200)]
media: gspca: Drop default m
Drop the "default m", as options should default to disabled.
No other media driver is enabled by default.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Fri, 18 Jun 2021 14:21:36 +0000 (16:21 +0200)]
media: include/uapi/linux/cec.h: typo: SATERDAY -> SATURDAY
Fix typo in a define: CEC_OP_REC_SEQ_SATERDAY -> CEC_OP_REC_SEQ_SATURDAY
This isn't used yet in actual applications to the best of my knowledge,
and it certainly doesn't break the ABI since the value doesn't change.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ján Čáni [Thu, 17 Jun 2021 19:59:48 +0000 (21:59 +0200)]
media: dvbsky: add support for MyGica T230C2_LITE and T230A
Add Geniatech MyGica T230C2_LITE and T230A as many people
are asking support for these devices on forums.
Link: https://lore.kernel.org/linux-media/YMuptIYFLdwSmw//@kali
Signed-off-by: Ján Čáni <pego149@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Linus Torvalds [Sun, 11 Jul 2021 22:07:40 +0000 (15:07 -0700)]
Linux 5.14-rc1
Hugh Dickins [Wed, 7 Jul 2021 20:13:33 +0000 (13:13 -0700)]
mm/rmap: try_to_migrate() skip zone_device !device_private
I know nothing about zone_device pages and !device_private pages; but if
try_to_migrate_one() will do nothing for them, then it's better that
try_to_migrate() filter them first, than trawl through all their vmas.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/lkml/1241d356-8ec9-f47b-a5ec-9b2bf66d242@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 7 Jul 2021 20:11:24 +0000 (13:11 -0700)]
mm/rmap: fix new bug: premature return from page_mlock_one()
In the unlikely race case that page_mlock_one() finds VM_LOCKED has been
cleared by the time it got page table lock, page_vma_mapped_walk_done()
must be called before returning, either explicitly, or by a final call
to page_vma_mapped_walk() - otherwise the page table remains locked.
Fixes:
cd62734ca60d ("mm/rmap: split try_to_munlock from try_to_unmap")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/lkml/20210711151446.GB4070@xsang-OptiPlex-9020/
Link: https://lore.kernel.org/lkml/f71f8523-cba7-3342-40a7-114abc5d1f51@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 7 Jul 2021 20:08:53 +0000 (13:08 -0700)]
mm/rmap: fix old bug: munlocking THP missed other mlocks
The kernel recovers in due course from missing Mlocked pages: but there
was no point in calling page_mlock() (formerly known as
try_to_munlock()) on a THP, because nothing got done even when it was
found to be mapped in another VM_LOCKED vma.
It's true that we need to be careful: Mlocked accounting of pte-mapped
THPs is too difficult (so consistently avoided); but Mlocked accounting
of only-pmd-mapped THPs is supposed to work, even when multiple mappings
are mlocked and munlocked or munmapped. Refine the tests.
There is already a VM_BUG_ON_PAGE(PageDoubleMap) in page_mlock(), so
page_mlock_one() does not even have to worry about that complication.
(I said the kernel recovers: but would page reclaim be likely to split
THP before rediscovering that it's VM_LOCKED? I've not followed that up)
Fixes:
9a73f61bdb8a ("thp, mlock: do not mlock PTE-mapped file huge pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/lkml/cfa154c-d595-406-eb7d-eb9df730f944@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 7 Jul 2021 20:06:17 +0000 (13:06 -0700)]
mm/rmap: fix comments left over from recent changes
Parallel developments in mm/rmap.c have left behind some out-of-date
comments: try_to_migrate_one() also accepts TTU_SYNC (already commented
in try_to_migrate() itself), and try_to_migrate() returns nothing at
all.
TTU_SPLIT_FREEZE has just been deleted, so reword the comment about it
in mm/huge_memory.c; and TTU_IGNORE_ACCESS was removed in 5.11, so
delete the "recently referenced" comment from try_to_unmap_one() (once
upon a time the comment was near the removed codeblock, but they drifted
apart).
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/lkml/563ce5b2-7a44-5b4d-1dfd-59a0e65932a9@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 11 Jul 2021 18:17:57 +0000 (11:17 -0700)]
Merge tag 'irq-urgent-2021-07-11' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Two fixes:
- Fix a MIPS IRQ handling RCU bug
- Remove a DocBook annotation for a parameter that doesn't exist
anymore"
* tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry
genirq/irqdesc: Drop excess kernel-doc entry @lookup
Linus Torvalds [Sun, 11 Jul 2021 18:13:57 +0000 (11:13 -0700)]
Merge tag 'sched-urgent-2021-07-11' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Three fixes:
- Fix load tracking bug/inconsistency
- Fix a sporadic CFS bandwidth constraints enforcement bug
- Fix a uclamp utilization tracking bug for newly woken tasks"
* tag 'sched-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/uclamp: Ignore max aggregation if rq is idle
sched/fair: Fix CFS bandwidth hrtimer expiry type
sched/fair: Sync load_sum with load_avg after dequeue
Linus Torvalds [Sun, 11 Jul 2021 18:10:48 +0000 (11:10 -0700)]
Merge tag 'perf-urgent-2021-07-11' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"A fix and a hardware-enablement addition:
- Robustify uncore_snbep's skx_iio_set_mapping()'s error cleanup
- Add cstate event support for Intel ICELAKE_X and ICELAKE_D"
* tag 'perf-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Clean up error handling path of iio mapping
perf/x86/cstate: Add ICELAKE_X and ICELAKE_D support
Linus Torvalds [Sun, 11 Jul 2021 18:06:09 +0000 (11:06 -0700)]
Merge tag 'locking-urgent-2021-07-11' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
- Fix a Sparc crash
- Fix a number of objtool warnings
- Fix /proc/lockdep output on certain configs
- Restore a kprobes fail-safe
* tag 'locking-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: sparc: Fix arch_cmpxchg64_local()
kprobe/static_call: Restore missing static_call_text_reserved()
static_call: Fix static_call_text_reserved() vs __init
jump_label: Fix jump_label_text_reserved() vs __init
locking/lockdep: Fix meaningless /proc/lockdep output of lock classes on !CONFIG_PROVE_LOCKING
Linus Torvalds [Sun, 11 Jul 2021 17:59:53 +0000 (10:59 -0700)]
Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is a set of minor fixes and clean ups in the core and various
drivers.
The only core change in behaviour is the I/O retry for spinup notify,
but that shouldn't impact anything other than the failing case"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
scsi: virtio_scsi: Add validation for residual bytes from response
scsi: ipr: System crashes when seeing type 20 error
scsi: core: Retry I/O for Notify (Enable Spinup) Required error
scsi: mpi3mr: Fix warnings reported by smatch
scsi: qedf: Add check to synchronize abort and flush
scsi: MAINTAINERS: Add mpi3mr driver maintainers
scsi: libfc: Fix array index out of bound exception
scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro
scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro
scsi: qedf: Use DEVICE_ATTR_RO() macro
scsi: qedi: Use DEVICE_ATTR_RO() macro
scsi: message: mptfc: Switch from pci_ to dma_ API
scsi: be2iscsi: Fix some missing space in some messages
scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
scsi: ufs: Fix build warning without CONFIG_PM
scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment
scsi: qla2xxx: Add heartbeat check
scsi: virtio_scsi: Do not overwrite SCSI status
scsi: libsas: Add LUN number check in .slave_alloc callback
scsi: core: Inline scsi_mq_alloc_queue()
...
Linus Torvalds [Sun, 11 Jul 2021 17:54:24 +0000 (10:54 -0700)]
Merge tag 'perf-tools-for-v5.14-2021-07-10' of git://git./linux/kernel/git/acme/linux
Pull more perf tool updates from Arnaldo Carvalho de Melo:
"New features:
- Enable use of BPF counters with 'perf stat --for-each-cgroup',
using per-CPU 'cgroup-switch' events with an attached BPF program
that does aggregation per-cgroup in the kernel instead of using
per-cgroup perf events.
- Add Topdown metrics L2 events as default events in 'perf stat' for
systems having those events.
Hardware tracing:
- Add a config for max loops without consuming a packet in the Intel
PT packet decoder, set via 'perf config intel-pt.max-loops=N'
Hardware enablement:
- Disable misleading NMI watchdog message in 'perf stat' on hybrid
systems such as Intel Alder Lake.
- Add a dummy event on hybrid systems to collect metadata records.
- Add 24x7 nest metric events for the Power10 platform.
Fixes:
- Fix event parsing for PMUs starting with the same prefix.
- Fix the 'perf trace' 'trace' alias installation dir.
- Fix buffer size to report iregs in perf script python scripts,
supporting the extended registers in PowerPC.
- Fix overflow in elf_sec__is_text().
- Fix 's' on source line when disasm is empty in the annotation TUI,
accessible via 'perf annotate', 'perf report' and 'perf top'.
- Plug leaks in scandir() returned dirent entries in 'perf test' when
sorting the shell tests.
- Fix --task and --stat with pipe input in 'perf report'.
- Fix 'perf probe' use of debuginfo files by build id.
- If a DSO has both dynsym and symtab ELF sections, read from both
when loading the symbol table, fixing a problem processing Fedora
32 glibc DSOs.
Libraries:
- Add grouping of events to libperf, from code in tools/perf,
allowing libperf users to use that mode.
Misc:
- Filter plt stubs from the 'perf probe --functions' output.
- Update UAPI header copies for asound, DRM, mman-common.h and the
ones affected by the quotactl_fd syscall"
* tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (29 commits)
perf test: Add free() calls for scandir() returned dirent entries
libperf: Add tests for perf_evlist__set_leader()
libperf: Remove BUG_ON() from library code in get_group_fd()
libperf: Add group support to perf_evsel__open()
perf tools: Fix pattern matching for same substring in different PMU type
perf record: Add a dummy event on hybrid systems to collect metadata records
perf stat: Add Topdown metrics L2 events as default events
libperf: Adopt evlist__set_leader() from tools/perf as perf_evlist__set_leader()
libperf: Move 'nr_groups' from tools/perf to evlist::nr_groups
libperf: Move 'leader' from tools/perf to perf_evsel::leader
libperf: Move 'idx' from tools/perf to perf_evsel::idx
libperf: Change tests to single static and shared binaries
perf intel-pt: Add a config for max loops without consuming a packet
perf stat: Disable the NMI watchdog message on hybrid
perf vendor events power10: Adds 24x7 nest metric events for power10 platform
perf script python: Fix buffer size to report iregs in perf script
perf trace: Fix the perf trace link location
perf top: Fix overflow in elf_sec__is_text()
perf annotate: Fix 's' on source line when disasm is empty
perf probe: Do not show @plt function by default
...
Linus Torvalds [Sat, 10 Jul 2021 23:19:10 +0000 (16:19 -0700)]
Merge tag 'rtc-5.14' of git://git./linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Mostly documentation/comment changes and non urgent fixes.
- add or fix SPDX identifiers
- NXP pcf*: fix datasheet URLs
- imxdi: add wakeup support
- pcf2127: handle timestamp interrupts, this fixes a possible
interrupt storm
- bd70528: Drop BD70528 support"
* tag 'rtc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
rtc: pcf8523: rename register and bit defines
rtc: pcf2127: handle timestamp interrupts
rtc: at91sam9: Remove unnecessary offset variable checks
rtc: s5m: Check return value of s5m_check_peding_alarm_interrupt()
rtc: spear: convert to SPDX identifier
rtc: tps6586x: convert to SPDX identifier
rtc: tps80031: convert to SPDX identifier
rtc: rtd119x: Fix format of SPDX identifier
rtc: sc27xx: Fix format of SPDX identifier
rtc: palmas: convert to SPDX identifier
rtc: max6900: convert to SPDX identifier
rtc: ds1374: convert to SPDX identifier
rtc: au1xxx: convert to SPDX identifier
rtc: pcf85063: Update the PCF85063A datasheet revision
dt-bindings: rtc: ti,bq32k: take maintainership
rtc: pcf8563: Fix the datasheet URL
rtc: pcf85063: Fix the datasheet URL
rtc: pcf2127: Fix the datasheet URL
dt-bindings: rtc: ti,bq32k: Convert to json-schema
dt-bindings: rtc: rx8900: Convert to YAML schema
...
Mel Gorman [Mon, 5 Jul 2021 09:51:17 +0000 (10:51 +0100)]
mm/page_alloc: Revert pahole zero-sized workaround
Commit
dbbee9d5cd83 ("mm/page_alloc: convert per-cpu list protection to
local_lock") folded in a workaround patch for pahole that was unable to
deal with zero-sized percpu structures.
A superior workaround is achieved with commit
a0b8200d06ad ("kbuild:
skip per-CPU BTF generation for pahole v1.18-v1.21").
This patch reverts the dummy field and the pahole version check.
Fixes:
dbbee9d5cd83 ("mm/page_alloc: convert per-cpu list protection to local_lock")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexandre Belloni [Sat, 10 Jul 2021 21:14:31 +0000 (23:14 +0200)]
rtc: pcf8523: rename register and bit defines
arch/arm/mach-ixp4xx/include/mach/platform.h now gets included indirectly
and defines REG_OFFSET. Rename the register and bit definition to something
specific to the driver.
Fixes:
7fd70c65faac ("ARM: irqstat: Get rid of duplicated declaration")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210710211431.1393589-1-alexandre.belloni@bootlin.com
Linus Torvalds [Sat, 10 Jul 2021 19:04:58 +0000 (12:04 -0700)]
Merge tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"13 cifs/smb3 fixes. Most are to address minor issues pointed out by
Coverity.
Also includes a packet signing enhancement and mount improvement"
* tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
cifs: prevent NULL deref in cifs_compose_mount_options()
SMB3.1.1: Add support for negotiating signing algorithm
cifs: use helpers when parsing uid/gid mount options and validate them
CIFS: Clarify SMB1 code for POSIX Lock
CIFS: Clarify SMB1 code for rename open file
CIFS: Clarify SMB1 code for delete
CIFS: Clarify SMB1 code for SetFileSize
smb3: fix typo in header file
CIFS: Clarify SMB1 code for UnixSetPathInfo
CIFS: Clarify SMB1 code for UnixCreateSymLink
cifs: clarify SMB1 code for UnixCreateHardLink
cifs: make locking consistent around the server session status
Linus Torvalds [Sat, 10 Jul 2021 18:57:57 +0000 (11:57 -0700)]
Merge tag 'pci-v5.14-fixes-1' of git://git./linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
"Revert host bridge window patch that fixed HP EliteDesk 805 G6, but
broke ppc:sam460ex (Bjorn Helgaas)"
* tag 'pci-v5.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: Coalesce host bridge contiguous apertures"
Linus Torvalds [Sat, 10 Jul 2021 18:53:06 +0000 (11:53 -0700)]
Merge tag 'i3c/for-5.14' of git://git./linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
- two small fixes to the svc driver
* tag 'i3c/for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: svc: fix doc warning in svc-i3c-master.c
i3c: master: svc: drop free_irq of devm_request_irq allocated irq
Linus Torvalds [Sat, 10 Jul 2021 18:43:25 +0000 (11:43 -0700)]
Merge tag 'thermal-v5.14-rc1' of git://git./linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Add rk3568 sensor support (Finley Xiao)
- Add missing MODULE_DEVICE_TABLE for the Spreadtrum sensor (Chunyan
Zhang)
- Export additionnal attributes for the int340x thermal processor
(Srinivas Pandruvada)
- Add SC7280 compatible for the tsens driver (Rajeshwari Ravindra
Kamble)
- Fix kernel documentation for thermal_zone_device_unregister() and use
devm_platform_get_and_ioremap_resource() (Yang Yingliang)
- Fix coefficient calculations for the rcar_gen3 sensor driver (Niklas
Söderlund)
- Fix shadowing variable rcar_gen3_ths_tj_1 (Geert Uytterhoeven)
- Add missing of_node_put() for the iMX and Spreadtrum sensors
(Krzysztof Kozlowski)
- Add tegra3 thermal sensor DT bindings (Dmitry Osipenko)
- Stop the thermal zone monitoring when unregistering it to prevent a
temperature update without the 'get_temp' callback (Dmitry Osipenko)
- Add rk3568 DT bindings, convert bindings to yaml schemas and add the
corresponding compatible in the Rockchip sensor (Ezequiel Garcia)
- Add the sc8180x compatible for the Qualcomm tsensor (Bjorn Andersson)
- Use the find_first_zero_bit() function instead of custom code (Andy
Shevchenko)
- Fix the kernel doc for the device cooling device (Yang Li)
- Reorg the processor thermal int340x to set the scene for the PCI mmio
driver (Srinivas Pandruvada)
- Add PCI MMIO driver for the int340x processor thermal driver
(Srinivas Pandruvada)
- Add hwmon sensors for the mediatek sensor (Frank Wunderlich)
- Fix warning for return value reported by Smatch for the int340x
thermal processor (Srinivas Pandruvada)
- Fix wrong register access and decoding for the int340x thermal
processor (Srinivas Pandruvada)
* tag 'thermal-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (23 commits)
thermal/drivers/int340x/processor_thermal: Fix tcc setting
thermal/drivers/int340x/processor_thermal: Fix warning for return value
thermal/drivers/mediatek: Add sensors-support
thermal/drivers/int340x/processor_thermal: Add PCI MMIO based thermal driver
thermal/drivers/int340x/processor_thermal: Split enumeration and processing part
thermal: devfreq_cooling: Fix kernel-doc
thermal/drivers/intel/intel_soc_dts_iosf: Switch to use find_first_zero_bit()
dt-bindings: thermal: tsens: Add sc8180x compatible
dt-bindings: rockchip-thermal: Support the RK3568 SoC compatible
dt-bindings: thermal: convert rockchip-thermal to json-schema
thermal/core/thermal_of: Stop zone device before unregistering it
dt-bindings: thermal: Add binding for Tegra30 thermal sensor
thermal/drivers/sprd: Add missing of_node_put for loop iteration
thermal/drivers/imx_sc: Add missing of_node_put for loop iteration
thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1
thermal/drivers/rcar_gen3_thermal: Fix coefficient calculations
thermal/drivers/st: Use devm_platform_get_and_ioremap_resource()
thermal/core: Correct function name thermal_zone_device_unregister()
dt-bindings: thermal: tsens: Add compatible string to TSENS binding for SC7280
thermal/drivers/int340x: processor_thermal: Export additional attributes
...
Linus Torvalds [Sat, 10 Jul 2021 18:01:38 +0000 (11:01 -0700)]
Merge tag 'kbuild-v5.14' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Increase the -falign-functions alignment for the debug option.
- Remove ugly libelf checks from the top Makefile.
- Make the silent build (-s) more silent.
- Re-compile the kernel if KBUILD_BUILD_TIMESTAMP is specified.
- Various script cleanups
* tag 'kbuild-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (27 commits)
scripts: add generic syscallnr.sh
scripts: check duplicated syscall number in syscall table
sparc: syscalls: use pattern rules to generate syscall headers
parisc: syscalls: use pattern rules to generate syscall headers
nds32: add arch/nds32/boot/.gitignore
kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set
kbuild: modpost: Explicitly warn about unprototyped symbols
kbuild: remove trailing slashes from $(KBUILD_EXTMOD)
kconfig.h: explain IS_MODULE(), IS_ENABLED()
kconfig: constify long_opts
scripts/setlocalversion: simplify the short version part
scripts/setlocalversion: factor out 12-chars hash construction
scripts/setlocalversion: add more comments to -dirty flag detection
scripts/setlocalversion: remove workaround for old make-kpkg
scripts/setlocalversion: remove mercurial, svn and git-svn supports
kbuild: clean up ${quiet} checks in shell scripts
kbuild: sink stdout from cmd for silent build
init: use $(call cmd,) for generating include/generated/compile.h
kbuild: merge scripts/mkmakefile to top Makefile
sh: move core-y in arch/sh/Makefile to arch/sh/Kbuild
...
Linus Torvalds [Sat, 10 Jul 2021 17:46:14 +0000 (10:46 -0700)]
Merge tag 's390-5.14-2' of git://git./linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Fix preempt_count initialization.
- Rework call_on_stack() macro to add proper type handling and avoid
possible register corruption.
- More error prone "register asm" removal and fixes.
- Fix syscall restarting when multiple signals are coming in. This adds
minimalistic trampolines to vdso so we can return from signal without
using the stack which requires pgm check handler hacks when NX is
enabled.
- Remove HAVE_IRQ_EXIT_ON_IRQ_STACK since this is no longer true after
switch to generic entry.
- Fix protected virtualization secure storage access exception
handling.
- Make machine check C handler always enter with DAT enabled and move
register validation to C code.
- Fix tinyconfig boot problem by avoiding MONITOR CALL without
CONFIG_BUG.
- Increase asm symbols alignment to 16 to make it consistent with
compilers.
- Enable concurrent access to the CPU Measurement Counter Facility.
- Add support for dynamic AP bus size limit and rework ap_dqap to deal
with messages greater than recv buffer.
* tag 's390-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits)
s390: preempt: Fix preempt_count initialization
s390/linkage: increase asm symbols alignment to 16
s390: rename CALL_ON_STACK_NORETURN() to call_on_stack_noreturn()
s390: add type checking to CALL_ON_STACK_NORETURN() macro
s390: remove old CALL_ON_STACK() macro
s390/softirq: use call_on_stack() macro
s390/lib: use call_on_stack() macro
s390/smp: use call_on_stack() macro
s390/kexec: use call_on_stack() macro
s390/irq: use call_on_stack() macro
s390/mm: use call_on_stack() macro
s390: introduce proper type handling call_on_stack() macro
s390/irq: simplify on_async_stack()
s390/irq: inline do_softirq_own_stack()
s390/irq: simplify do_softirq_own_stack()
s390/ap: get rid of register asm in ap_dqap()
s390: rename PIF_SYSCALL_RESTART to PIF_EXECVE_PGSTE_RESTART
s390: move restart of execve() syscall
s390/signal: remove sigreturn on stack
s390/signal: switch to using vdso for sigreturn and syscall restart
...
Linus Torvalds [Sat, 10 Jul 2021 17:36:33 +0000 (10:36 -0700)]
Merge tag 'mips_5.14_1' of git://git./linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix for accesing gic via vdso
- two build fixes
* tag 'mips_5.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: vdso: Invalid GIC access through VDSO
mips: disable branch profiling in boot/decompress.o
mips: always link byteswap helpers into decompressor
Linus Torvalds [Sat, 10 Jul 2021 17:29:35 +0000 (10:29 -0700)]
Merge tag 'arm-defconfig-5.14' of git://git./linux/kernel/git/soc/soc
Pull ARM defconfig updates from "Olof Johansson
"A set of defconfig changes, we keep them in a separate branch to avoid
conflicts between topics by separating them out.
These changes are almost exclusively turning on new drivers for
various platforms, or turning on modules for new drivers for the
shared generic configs"
* tag 'arm-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits)
arm64: defconfig: Enable renesas usb xhci pci host controller
arm64: defconfig: Visconti: Enable GPIO
arm64: defconfig: Visconti: Enable PWM
arm64: defconfig: add drivers needed for DragonBoard410c
ARM: config: aspeed: Add DEBUG_FS and EXT4
ARM: ixp4xx_defconfig: add MTD_PHYSMAP
ARM: ixp4xx_defconfig: add CONFIG_SERIAL_OF_PLATFORM
ARM: imx_v6_v7_defconfig: Select the Wifi ath10k sdio driver
ARM: exynos_defconfig: restore framebuffer support
arm64: defconfig: Enable ARCH_R9A07G044
ARM: configs: at91_dt_defconfig: configs for sam9x60
arm64: defconfig: Enable Exynos UFS driver
arm64: defconfig: qcom: enable interconnect for SM8350
ARM: tegra_defconfig: Enable CONFIG_DEVFREQ_THERMAL
arm64: defconfig: Enable usb2_clksel for R-Car Gen3 and RZ/G2
arm64: defconfig: enable Layerscape EDAC driver
ARM: omap2plus_defconfig: Add LP5523 LED driver
ARM: omap2plus_defconfig: Add WL1251 and WEXT modules
ARM: shmobile: defconfig: Refresh for v5.13-rc1
arm64: defconfig: Allow Mediatek boards to boot from the mmc
...
Linus Torvalds [Sat, 10 Jul 2021 16:46:20 +0000 (09:46 -0700)]
Merge tag 'arm-drivers-5.14' of git://git./linux/kernel/git/soc/soc
Pull ARM driver updates from Olof Johansson:
- Reset controllers: Adding support for Microchip Sparx5 Switch.
- Memory controllers: ARM Primecell PL35x SMC memory controller driver
cleanups and improvements.
- i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN.
- Rockchip: RK3568 power domains support + DT binding updates,
cleanups.
- Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details,
including support for MSM8226, MDM9607, SM6125 and SC8180X.
- ARM FFA driver: "Firmware Framework for ARMv8-A", defining management
interfaces and communication (including bus model) between partitions
both in Normal and Secure Worlds.
- Tegra Memory controller changes, including major rework to deal with
identity mappings at boot and integration with ARM SMMU pieces.
* tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (120 commits)
firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string
firmware: turris-mox-rwtm: show message about HWRNG registration
firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng
firmware: turris-mox-rwtm: report failures better
firmware: turris-mox-rwtm: fix reply status decoding function
soc: imx: gpcv2: add support for i.MX8MN power domains
dt-bindings: add defines for i.MX8MN power domains
firmware: tegra: bpmp: Fix Tegra234-only builds
iommu/arm-smmu: Use Tegra implementation on Tegra186
iommu/arm-smmu: tegra: Implement SID override programming
iommu/arm-smmu: tegra: Detect number of instances at runtime
dt-bindings: arm-smmu: Add Tegra186 compatible string
firmware: qcom_scm: Add MDM9607 compatible
soc: qcom: rpmpd: Add MDM9607 RPM Power Domains
soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's
soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's
dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml
memory: emif: remove unused frequency and voltage notifiers
memory: fsl_ifc: fix leak of private memory on probe failure
memory: fsl_ifc: fix leak of IO mapping on probe failure
...
Linus Torvalds [Sat, 10 Jul 2021 16:33:54 +0000 (09:33 -0700)]
Merge tag 'arm-dt-5.14' of git://git./linux/kernel/git/soc/soc
Pull ARM devicetree updates from Olof Johansson:
"Like always, the DT branch is sizable. There are numerous additions
and fixes to existing platforms, but also a handful of new ones
introduced. Less than some other releases, but there's been
significant work on cleanups, refactorings and device enabling on
existing platforms.
A non-exhaustive list of new material:
- Refactoring of BCM2711 dtsi structure to add support for the
Raspberry Pi 400
- Rockchip: RK3568 SoC and EVB, video codecs for
rk3036/3066/3188/322x
- Qualcomm: SA8155p Automotive platform (SM8150 derivative),
SM8150/8250 enhancements and support for Sony Xperia 1/1II and
5/5II
- TI K3: PCI/USB3 support on AM64-sk boards, R5 remoteproc
definitions
- TI OMAP: Various cleanups
- Tegra: Audio support for Jetson Xavier NX, SMMU support on Tegra194
- Qualcomm: lots of additions for peripherals across several SoCs,
and new support for Microsoft Surface Duo (SM8150-based), Huawei
Ascend G7.
- i.MX: Numerous additions of features across SoCs and boards.
- Allwinner: More device bindings for V3s, Forlinx OKA40i-C and
NanoPi R1S H5 boards
- MediaTek: More device bindings for mt8167, new Chromebook system
variants for mt8183
- Renesas: RZ/G2L SoC and EVK added
- Amlogic: BananaPi BPI-M5 board added"
* tag 'arm-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (511 commits)
arm64: dts: rockchip: add basic dts for RK3568 EVB
arm64: dts: rockchip: add core dtsi for RK3568 SoC
arm64: dts: rockchip: add generic pinconfig settings used by most Rockchip socs
ARM: dts: rockchip: add vpu and vdec node for RK322x
ARM: dts: rockchip: add vpu nodes for RK3066 and RK3188
ARM: dts: rockchip: add vpu node for RK3036
arm64: dts: ipq8074: Add QUP6 I2C node
arm64: dts: rockchip: Re-add regulator-always-on for vcc_sdio for rk3399-roc-pc
arm64: dts: rockchip: Re-add regulator-boot-on, regulator-always-on for vdd_gpu on rk3399-roc-pc
arm64: dts: rockchip: add ir-receiver for rk3399-roc-pc
arm64: dts: rockchip: Add USB-C port details for rk3399 Firefly
arm64: dts: rockchip: Sort rk3399 firefly pinmux entries
arm64: dts: rockchip: add infrared receiver node to RK3399 Firefly
arm64: dts: rockchip: add SPDIF node for rk3399-firefly
arm64: dts: rockchip: Add Rotation Property for OGA Panel
arm64: dts: qcom: sc7180: bus votes for eMMC and SD card
arm64: dts: qcom: sm8250-edo: Add Samsung touchscreen
arm64: dts: qcom: sm8250-edo: Enable GPI DMA
arm64: dts: qcom: sm8250-edo: Enable ADSP/CDSP/SLPI
arm64: dts: qcom: sm8250-edo: Enable PCIe
...
Linus Torvalds [Sat, 10 Jul 2021 16:22:44 +0000 (09:22 -0700)]
Merge tag 'arm-soc-5.14' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC updates from Olof Johansson:
"A few SoC (code) changes have queued up this cycle, mostly for minor
changes and some refactoring and cleanup of legacy platforms. This
branch also contains a few of the fixes that weren't sent in by the
end of the release (all fairly minor).
- Adding an additional maintainer for the TEE subsystem (Sumit Garg)
- Quite a significant modernization of the IXP4xx platforms by Linus
Walleij, revisiting with a new PCI host driver/binding, removing
legacy mach/* include dependencies and moving platform
detection/config to drivers/soc. Also some updates/cleanup of
platform data.
- Core power domain support for Tegra platforms, and some
improvements in build test coverage by adding stubs for compile
test targets.
- A handful of updates to i.MX platforms, adding legacy (non-PSCI)
SMP support on i.MX7D, SoC ID setup for i.MX50, removal of platform
data and board fixups for iMX6/7.
... and a few smaller changes and fixes for Samsung, OMAP, Allwinner,
Rockchip"
* tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (53 commits)
MAINTAINERS: Add myself as TEE subsystem reviewer
ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device"
hw_random: ixp4xx: Add OF support
hw_random: ixp4xx: Add DT bindings
hw_random: ixp4xx: Turn into a module
hw_random: ixp4xx: Use SPDX license tag
hw_random: ixp4xx: enable compile-testing
pata: ixp4xx: split platform data to its own header
soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h
PCI: ixp4xx: Add a new driver for IXP4xx
PCI: ixp4xx: Add device tree bindings for IXP4xx
ARM/ixp4xx: Make NEED_MACH_IO_H optional
ARM/ixp4xx: Move the virtual IObases
MAINTAINERS: ARM/MStar/Sigmastar SoCs: Add a link to the MStar tree
ARM: debug: add UART early console support for MSTAR SoCs
ARM: dts: ux500: Fix LED probing
ARM: imx: add smp support for imx7d
ARM: imx6q: drop of_platform_default_populate() from init_machine
arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory
soc/tegra: fuse: Fix Tegra234-only builds
...
Linus Torvalds [Sat, 10 Jul 2021 16:17:13 +0000 (09:17 -0700)]
Merge tag 'fixes-2021-07-09' of git://git./linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"This is a fix for the rework of ARM's pfn_valid() implementation
merged during this merge window.
Don't abuse pfn_valid() to check if pfn is in RAM
The semantics of pfn_valid() is to check presence of the memory map
for a PFN and not whether a PFN is in RAM. The memory map may be
present for a hole in the physical memory and if such hole corresponds
to an MMIO range, __arm_ioremap_pfn_caller() will produce a WARN() and
fail.
Use memblock_is_map_memory() instead of pfn_valid() to check if a PFN
is in RAM or not"
* tag 'fixes-2021-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
arm: ioremap: don't abuse pfn_valid() to check if pfn is in RAM
Linus Torvalds [Sat, 10 Jul 2021 16:06:41 +0000 (09:06 -0700)]
Merge branch 'for-5.14-fixes' of git://git./linux/kernel/git/dennis/percpu
Pull percpu fix from Dennis Zhou:
"This is just a single change to fix percpu depopulation. The code
relied on depopulation code written specifically for the free path and
relied on vmalloc to do the tlb flush lazily. As we're modifying the
backing pages during the lifetime of a chunk, we need to also flush
the tlb accordingly.
Guenter Roeck reported this issue in [1] on mips. I believe we just
happen to be lucky given the much larger chunk sizes on x86 and
consequently less churning of this memory"
Link: https://lore.kernel.org/lkml/20210702191140.GA3166599@roeck-us.net/
* 'for-5.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu: flush tlb in pcpu_reclaim_populated()
Mian Yousaf Kaukab [Tue, 29 Jun 2021 15:06:43 +0000 (17:06 +0200)]
rtc: pcf2127: handle timestamp interrupts
commit
03623b4b041c ("rtc: pcf2127: add tamper detection support")
added support for timestamp interrupts. However they are not being
handled in the irq handler. If a timestamp interrupt occurs it
results in kernel disabling the interrupt and displaying the call
trace:
[ 121.145580] irq 78: nobody cared (try booting with the "irqpoll" option)
...
[ 121.238087] [<
00000000c4d69393>] irq_default_primary_handler threaded [<
000000000a90d25b>] pcf2127_rtc_irq [rtc_pcf2127]
[ 121.248971] Disabling IRQ #78
Handle timestamp interrupts in pcf2127_rtc_irq(). Save time stamp
before clearing TSF1 and TSF2 flags so that it can't be overwritten.
Set a flag to mark if the timestamp is valid and only report to sysfs
if the flag is set. To mimic the hardware behavior, don’t save
another timestamp until the first one has been read by the userspace.
However, if the alarm irq is not configured, keep the old way of
handling timestamp interrupt in the timestamp0 sysfs calls.
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Tested-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210629150643.31551-1-ykaukab@suse.de
Nobuhiro Iwamatsu [Thu, 8 Jul 2021 05:13:40 +0000 (14:13 +0900)]
rtc: at91sam9: Remove unnecessary offset variable checks
The offset variable is checked by at91_rtc_readalarm(), but this check
is unnecessary because the previous check knew that the value of this
variable was not 0.
This removes that unnecessary offset variable checks.
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210708051340.341345-1-nobuhiro1.iwamatsu@toshiba.co.jp
Nobuhiro Iwamatsu [Thu, 8 Jul 2021 05:13:04 +0000 (14:13 +0900)]
rtc: s5m: Check return value of s5m_check_peding_alarm_interrupt()
s5m_check_peding_alarm_interrupt() in s5m_rtc_read_alarm() gets the return
value, but doesn't use it.
This modifies using the s5m_check_peding_alarm_interrupt()"s return value
as the s5m_rtc_read_alarm()'s return value.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210708051304.341278-1-nobuhiro1.iwamatsu@toshiba.co.jp
Nobuhiro Iwamatsu [Wed, 7 Jul 2021 07:58:04 +0000 (16:58 +0900)]
rtc: spear: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-11-nobuhiro1.iwamatsu@toshiba.co.jp
Nobuhiro Iwamatsu [Wed, 7 Jul 2021 07:58:02 +0000 (16:58 +0900)]
rtc: tps6586x: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-9-nobuhiro1.iwamatsu@toshiba.co.jp
Nobuhiro Iwamatsu [Wed, 7 Jul 2021 07:58:01 +0000 (16:58 +0900)]
rtc: tps80031: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-8-nobuhiro1.iwamatsu@toshiba.co.jp
Nobuhiro Iwamatsu [Wed, 7 Jul 2021 07:58:00 +0000 (16:58 +0900)]
rtc: rtd119x: Fix format of SPDX identifier
For C files, use the C99 format (//).
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-7-nobuhiro1.iwamatsu@toshiba.co.jp
Nobuhiro Iwamatsu [Wed, 7 Jul 2021 07:57:59 +0000 (16:57 +0900)]
rtc: sc27xx: Fix format of SPDX identifier
For C files, use the C99 format (//).
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-6-nobuhiro1.iwamatsu@toshiba.co.jp
Nobuhiro Iwamatsu [Wed, 7 Jul 2021 07:57:58 +0000 (16:57 +0900)]
rtc: palmas: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-5-nobuhiro1.iwamatsu@toshiba.co.jp
Nobuhiro Iwamatsu [Wed, 7 Jul 2021 07:57:57 +0000 (16:57 +0900)]
rtc: max6900: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-4-nobuhiro1.iwamatsu@toshiba.co.jp
Nobuhiro Iwamatsu [Wed, 7 Jul 2021 07:57:56 +0000 (16:57 +0900)]
rtc: ds1374: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-3-nobuhiro1.iwamatsu@toshiba.co.jp
Nobuhiro Iwamatsu [Wed, 7 Jul 2021 07:57:55 +0000 (16:57 +0900)]
rtc: au1xxx: convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-2-nobuhiro1.iwamatsu@toshiba.co.jp
Bjorn Helgaas [Fri, 9 Jul 2021 23:50:27 +0000 (18:50 -0500)]
Revert "PCI: Coalesce host bridge contiguous apertures"
This reverts commit
65db04053efea3f3e412a7e0cc599962999c96b4.
Guenter reported that after
65db04053efe, the ppc:sam460ex qemu emulation
no longer boots from nvme:
nvme nvme0: Device not ready; aborting initialisation, CSTS=0x0
nvme nvme0: Removing after probe failure status: -19
Link: https://lore.kernel.org/r/20210709231529.GA3270116@roeck-us.net
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Fabio Estevam [Thu, 24 Jun 2021 12:09:53 +0000 (09:09 -0300)]
rtc: pcf85063: Update the PCF85063A datasheet revision
After updating the datasheet URL, the PCF85063A datasheet revision
has changed.
Adjust it accordingly.
Reported-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210624120953.2313378-1-festevam@gmail.com