Add "attn", "lq" and "stq" power4 insns.

include/opcode/
* h8300.h (IMM4_NS, IMM8_NS): New.
(h8_opcodes): Replace IMM4 with IMM4_NS in mov.b and mov.w entries.
Likewise IMM8 for mov.w and mov.l.  Likewise IMM16U for mov.l.

gas/testsuite
* gas/h8300/h8sx_mov_imm.[sd]: New test.
* gas/h8300/h8300.exp: Run it.

opcodes/
* h8300-dis.c (bfd_h8_disassemble): Don't print brackets round
rts/l and rte/l register lists.

gas/
* config/tc-h8300.c (get_rtsl_operands): Accept unbracketed register
lists.  Allow single-register ranges.

testsuite/
* gas/h8300/h8sx_rtsl.[sd]: New test.
* gas/h8300/h8300.exp: Run it.

* gas/h8300/h8sx_disp2.[sd]: New test.
* gas/h8300/h8300.exp: Run it.

Fix last changelog.

include/elf/
* h8.h (E_H8_MACH_H8300SXN): New flag.

bfd/
* archures.c (bfd_mach_h8300sxn): New architecture.
* bfd-in2.h: Regenerate.
* cpu-h8300.c (h8300_scan): Check for 'sxn'.
(h8300sxn_info_struct): New.
(h8300sx_info_struct): Link to it.
* elf32-h8300.c (elf32_h8_mach): Add h8300sxn case.
(elf32_h8_final_write_processing): Likewise.

gas/
* config/tc-h8300.c (h8300sxnmode): New.
(md_pseudo_table): Add .h8300sxn entry.  Sync others with FSF version.

ld/
* configure.tgt (h8300*): Add h8300sxn emulations.
* Makefile.am (ALL_EMULATIONS): Add eh8300sxn.o and eh8300sxnelf.o.
(eh8300sxn.c, eh8300sxnelf.c): New rules.
* Makefile.in: Regenerate.
* emulparams/h8300sxnelf.sh, emulparams/h8300sxn.sh: New files.

2003-06-09  H.J. Lu <hongjiu.lu@intel.com>

* NEWS: Updated for the new -n option for the i386 assembler.

* config/tc-i386.c (optimize_align_code): New.
(md_shortopts): Add 'n'.
(md_parse_option): Handle 'n'.
(md_show_usage): Add '-n'.

* config/tc-i386.h (optimize_align_code): Declared.
(md_do_align): Optimize code alignment only if optimize_align_code
is not 0.

* doc/as.texinfo: Add the new -n option.

* doc/c-i386.texi: Document the new -n option.

* ld-elfvsb/elfvsb.exp: Run for powerpc64 too.
* ld-powerpc/tls.t: Update.
* ld-powerpc/tlsexe.d: Update.
* ld-powerpc/tlsexe.r: Update.
* ld-powerpc/tlsexetoc.d: Update.
* ld-powerpc/tlsexetoc.r: Update.
* ld-powerpc/tlsexetoc.t: Update.
* ld-powerpc/tlsso.d: Update.
* ld-powerpc/tlsso.g: Update.
* ld-powerpc/tlsso.r: Update.
* ld-powerpc/tlsso.t: Update.
* ld-powerpc/tlstocso.d: Update.
* ld-powerpc/tlstocso.g: Update.
* ld-powerpc/tlstocso.r: Update.
* ld-powerpc/tlstocso.t: Update.

* emulparams/elf64ppc.sh (EXECUTABLE_SYMBOLS, OTHER_BSS_END_SYMBOLS,
CTOR_START, CTOR_END, DTOR_START, DTOR_END): Don't define.

* Makefile.tpl: Remove bogus conditional.
* Makefile.in: Regenerate.

*** empty log message ***

daily update

2003-06-09  Andrew Cagney  <cagney@redhat.com>

* frame.h (deprecated_unwind_get_saved_register): Rename
generic_unwind_get_saved_register, update comments.
* mips-tdep.c (mips_get_saved_register): Update.
* frame.c (deprecated_unwind_get_saved_register): Update.

Shared-object relocation tests

* gdb.texinfo (Separate Debug Files): Remove extra semicolon.

2003-06-09  Andrew Cagney  <cagney@redhat.com>

* vax-tdep.c (vax_frame_locals_address): Delete function.
(vax_gdbarch_init): Do not set frame_locals_address.
* m68hc11-tdep.c (m68hc11_frame_locals_address): Delete function.
(m68hc11_gdbarch_init): Do not set frame_locals_address.
* s390-tdep.c (s390_frame_args_address): Delete function.
(s390_gdbarch_init): Do not set frame_args_address or
frame_locals_address.
* ns32k-tdep.c (ns32k_frame_locals_address): Delete.
(ns32k_gdbarch_init): Do not set frame_locals_address.
* hppa-tdep.c (hppa_frame_args_address): Delete function.
(hppa_frame_locals_address): Delete function.
(hppa_gdbarch_init): Do not set frame_args_address, or
frame_locals_address.
* arm-tdep.c (arm_frame_args_address): Delete.
(arm_frame_locals_address): Delete.
(arm_gdbarch_init): Do not set frame_args_address, or
frame_locals_address.

2003-06-09  Andrew Cagney  <cagney@redhat.com>

* gdbarch.sh (FRAME_NUM_ARGS): Change to function with predicate.
* gdbarch.h, gdbarch.c: Re-generate.
* arch-utils.h (frame_num_args_unknown): Delete both declarations.
* arch-utils.c (frame_num_args_unknown): Delete function.
* stack.c (print_args_stub): Use FRAME_NUM_ARGS_P.
(frame_info): Use FRAME_NUM_ARGS_P.
* arm-tdep.c (arm_frame_num_args): Delete function.
(arm_gdbarch_init): Do not set frame_num_args.
* config/pa/tm-hppa64.h (FRAME_NUM_ARGS): Delete.
* hppa-tdep.c (hppa_frame_num_args): Delete function.
(hppa_gdbarch_init): Do not set frame_num_args.
* config/sparc/tm-sparc.h (FRAME_NUM_ARGS): Delete.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Do not set
frame_num_args to default frame_num_args_unknown.
* v850-tdep.c (v850_gdbarch_init): Ditto.
* sparc-tdep.c (sparc_gdbarch_init): Ditto.
* sh-tdep.c (sh_gdbarch_init): Ditto.
* s390-tdep.c (s390_gdbarch_init): Ditto.
* rs6000-tdep.c (rs6000_gdbarch_init): Ditto.
* mn10300-tdep.c (mn10300_gdbarch_init): Ditto.
* mips-tdep.c (mips_gdbarch_init): Ditto.
* mcore-tdep.c (mcore_gdbarch_init): Ditto.
* m68k-tdep.c (m68k_gdbarch_init): Ditto.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Ditto.
* ia64-tdep.c (ia64_gdbarch_init): Ditto.
* i386-tdep.c (i386_gdbarch_init): Ditto.
* h8300-tdep.c (h8300_gdbarch_init): Ditto.
* frv-tdep.c (frv_gdbarch_init): Ditto.
* d10v-tdep.c (d10v_gdbarch_init): Ditto.
* cris-tdep.c (cris_gdbarch_init): Ditto.
* avr-tdep.c (avr_gdbarch_init): Ditto.
* alpha-tdep.c (alpha_gdbarch_init): Ditto.

2003-06-09  Andrew Cagney  <cagney@redhat.com>

* printcmd.c (print_frame_nameless_args): Moved to "stack.c".
(print_frame_args): Moved to "stack.c".
* stack.c: Include "gdb_assert.h".
(print_frame_nameless_args): Moved from "printcmd.c", made static.
(print_frame_args): Moved from "printcmd.c".
* frame.h (print_frame_args): Delete declaration.
* Makefile.in (stack.o): Update dependencies.

Really delete frame_args_address from
* vax-tdep.c (vax_frame_args_address_correct): Delete.
(vax_frame_args_address): Merge in vax_frame_args_address_correct.

2003-06-08  Andrew Cagney  <cagney@redhat.com>

* frame.c (get_prev_frame): Remove reference to
frame_args_address_correct in comments.
* frame-base.c (default_frame_args_address): Delete code
conditional on FRAME_ARGS_ADDRESS_CORRECT.
* vax-tdep.c (vax_frame_args_address_correct): Delete.
(vax_frame_args_address): Merge in vax_frame_args_address_correct.
* config/vax/tm-vax.h (FRAME_ARGS_ADDRESS_CORRECT): Delete
(vax_frame_args_address_correct): Delete declaration.

Index: doc/ChangeLog
2003-06-08  Andrew Cagney  <cagney@redhat.com>

* gdbint.texinfo (Target Architecture Definition): Delete
documentation on FRAME_ARGS_ADDRESS_CORRECT.

2003-06-08  Andrew Cagney  <cagney@redhat.com>

* gdbarch.sh (UNWIND_SP): Add.
* gdbarch.h, gdbarch.c: Re-generate.
* frame.c (frame_sp_unwind): New function.
(get_frame_sp): New function.
* frame.h (get_frame_sp, frame_sp_unwind): Declare.
* regcache.c (read_sp): Rewrite, try each of TARGET_READ_SP,
gdbarch_unwind_sp and SP_REGNUM when looking for the SP register
value.
* d10v-tdep.c (d10v_unwind_sp): Replace d10v_read_sp.
(d10v_gdbarch_init): Set unwind_sp instead of read_sp.

2003-06-08  Andrew Cagney  <cagney@redhat.com>

* gdbint.texinfo (Target Architecture Definition): Document
"unwind_sp".  Cross reference "unwind_sp" and TARGET_READ_SP.

*** empty log message ***

daily update

2003-06-08  Andrew Cagney  <cagney@redhat.com>

Deprecate BIG_REMOTE_BREAKPOINT, LITTLE_REMOTE_BREAKPOINT and
REMOTE_BREAKPOINT.
* remote.c: Update.
* config/sh/tm-sh.h (DEPRECATED_BIG_REMOTE_BREAKPOINT): Update.
(DEPRECATED_LITTLE_REMOTE_BREAKPOINT): Update.
* config/m68k/tm-sun3.h: Update.
* config/m68k/tm-m68klynx.h: Update.
* config/h8300/tm-h8300.h (DEPRECATED_REMOTE_BREAKPOINT): Update.

2003-06-08  Andrew Cagney  <cagney@redhat.com>

* trad-frame.h (struct trad_frame_saved_reg): Rename "struct
trad_frame".  Update comments.
* d10v-tdep.c (struct d10v_unwind_cache): Update.
* trad-frame.c (trad_frame_alloc_saved_regs): Update.
(trad_frame_register_value, trad_frame_prev_register): Update.

2003-06-08  Andrew Cagney  <cagney@redhat.com>

* acinclude.m4 (gcc_AC_CHECK_DECL, (gcc_AC_CHECK_DECL): Stolen
from GCC's acinclude.m4.
* configure.in: Check for getopt's delcaration.
* aclocal.m4, config.in, configure: Re-generate.
* main.c (error_init): Delete declaration.
* defs.h (error_init): Declare.
* rs6000-tdep.c (rs6000_fetch_pointer_argument): Make static.
(rs6000_convert_from_func_ptr_addr): Make static.
(_initialize_rs6000_tdep): Add declaration.
* cli/cli-cmds.c (dont_repeat): Delete declaration.
(show_commands, set_verbose, show_history): Delete declaration.
* top.h (set_verbose): Add declaration.
(show_history, set_history, show_commands): Add declaration.
(do_restore_instream_cleanup): Add declaration.
* objc-lang.c (specialcmp): Make static.
(print_object_command): Make static.
(find_objc_msgsend): Make static.
(find_objc_msgcall_submethod_helper): Make static.
(find_objc_msgcall_submethod): Make static.
(_initialize_objc_language): Add declaration.
(find_implementation_from_class): Make static.
(find_implementation): Make static.
* objc-exp.y (yylex): Delete lookup_struct_typedef declaration.
* objc-lang.h (lookup_struct_typedef): Add declaration.
* cli/cli-interp.c (_initialize_cli_interp): Add declaration.
* cli/cli-script.c (clear_hook_in_cleanup): Make static.
(do_restore_user_call_depth): Make static.
(do_restore_instream_cleanup): Delete declaration.
(dont_repeat): Delete declaration.
* cli/cli-decode.c (add_abbrev_cmd): Delete function.
* cli/cli-dump.c (_initialize_cli_dump): Add declaration.
* reggroups.c (_initialize_reggroup): Add declaration.
* cp-support.c (_initialize_cp_support): Add declaration.
* cp-abi.c (_initialize_cp_abi): Add declaration.
* hpacc-abi.c (_initialize_hpacc_abi): Add declaration.
* gnu-v3-abi.c (gnuv3_baseclass_offset): Make static.
(_initialize_gnu_v3_abi): Add declaration.
* gnu-v2-abi.c (gnuv2_value_rtti_type): Make static.
(_initialize_gnu_v2_abi): Add declaration.
* frame-base.c (_initialize_frame_base): Add declaration.
* doublest.c (floatformat_from_length): Make static.
* frame-unwind.c (_initialize_frame_unwind): Add declaration.
* frame.c (create_sentinel_frame): Make static.
(_initialize_frame): Add declaration.
* top.c (do_catch_errors): Make static.
(gdb_rl_operate_and_get_next_completion): Make static.
* typeprint.c: Include "typeprint.h".
* sentinel-frame.c (sentinel_frame_prev_register): Make static.
(sentinel_frame_this_id): Make static.
* p-valprint.c (_initialize_pascal_valprint): Add declaration.
* ui-out.c (make_cleanup_ui_out_begin_end): Delete function.
* dwarf2-frame.c (dwarf2_frame_cache): Make static.
* p-exp.y (push_current_type, pop_current_type): ISO C declaration.
* dwarf2expr.h (dwarf_expr_context): ISO C declaration.
* maint.c (maintenance_print_architecture): Make static.
* signals/signals.c (_initialize_signals): Add declaration.
* std-regs.c (_initialize_frame_reg): Add declaration.
* jv-exp.y (push_variable): ISO C definition.
(push_qualified_expression_name): Ditto.
* memattr.c (_initialize_mem): Add declaration.
* remote.c (remote_check_watch_resources): Make static.
(remote_stopped_by_watchpoint): Make static.
(remote_stopped_data_address): Make static.
* d10v-tdep.c (nr_dmap_regs): Make static.
(a0_regnum): Make static.
(d10v_frame_unwind_cache): Make static.
(d10v_frame_p): Make static.
* osabi.c (show_osabi): Make static.
(_initialize_gdb_osabi): Add extern declaration.
* gdbtypes.c (make_qualified_type): Make static.
(safe_parse_type): Make static.
* macrocmd.c (_initialize_macrocmd): Add extern declaration.
* macrotab.c (macro_bcache_free): Make static.
* interps.c (interp_set_quiet): Make static.
(interpreter_exec_cmd): Make static.
* stack.h (select_frame_command): New file.
* stack.c: Include "stack.h".
(select_frame_command_wrapper): Delete function.
(select_frame_command): Make global.
* infcall.c: Include "infcall.h".
* linespec.c: Include "linespec.h".
* symfile.c (sections_overlap): Make static.
* cp-support.h (cp_initialize_namespace): ISO C declaration.
* charset.c (_initialize_charset): Add missing prototype.
* regcache.c (init_legacy_regcache_descr): Make static.
(do_regcache_xfree): Make static.
(regcache_xfer_part): Make static.
(_initialize_regcache): Add missing prototype.
* breakpoint.c (parse_breakpoint_sals): Make static.
(breakpoint_sals_to_pc): Make static.
* interps.h (clear_interpreter_hooks): ISO C declaration.
* Makefile.in (stack_h): Define.
(stack.o, typeprint.o, mi-main.o): Update dependencies.
(mi-cmd-stack.o, infcall.o, linespec.o): Update dependencies.

Index: mi/ChangeLog
2003-06-08  Andrew Cagney  <cagney@redhat.com>

* mi-parse.c (_initialize_mi_parse): Delete function.
* mi-main.c: Include "mi-main.h".
* mi-interp.c (_initialize_mi_interp): Add declaration.
* mi-cmd-stack.c: Include "stack.h".
(select_frame_command_wrapper): Delete extern declaration.
(mi_cmd_stack_select_frame): Replace select_frame_command_wrapper
with select_frame_command.

2003-06-08  Andrew Cagney  <cagney@redhat.com>

* Makefile.in (d10v-tdep.o): Update dependencies.
(SFILES): Add trad-frame.c.
(trad_frame_h): Define.
(COMMON_OBS): Add trad-frame.o.
(trad-frame.o): Specify dependencies.
* d10v-tdep.c: Include "trad-frame.h".
(saved_regs_unwinder): Delete function.
(d10v_frame_prev_register): Use trad_frame_prev_register.
(struct d10v_unwind_cache): Change type of "saved_regs" to "struct
trad_frame", delete "regs" and "prev_sp".
(prologue_find_regs): Use trad-frame.
* trad-frame.h, trad-frame.c: New files.

* emultempl/ppc64elf.em (emit_stub_syms, toc_section): New vars.
(build_toc_list): New function.
(gld${EMULATION_NAME}_finish): Call build_toc_list and
ppc64_elf_reinit_toc.  Adjust ppc64_elf_build_stubs call.
(OPTION_STUBSYMS): Define.
(PARSE_AND_LIST_LONGOPTS): Add emit-stub-syms.
(PARSE_AND_LIST_OPTIONS): Document.
(PARSE_AND_LIST_ARGS_CASES): Handle.

* elf64-ppc.c: Move TARGET_LITTLE_SYM and other macros used by
elfxx-target.h so that we can use elf_backend_got_header_size.
(ELF_MACHINE_ALT1, ELF_MACHINE_ALT2): Delete.
(GLINK_CALL_STUB_SIZE): Modify.  Define new glink call stub and
associated macros.
(ppc64_elf_howto_raw <GOT_TPREL16_DS, GOT_TPREL16_LO_DS>): Correct
dst_mask.
(enum ppc_stub_type): Add ppc_stub_long_branch_r2off and
ppc_stub_plt_branch_r2off.
(struct ppc_stub_hash_entry): Reorganize.
(struct ppc_link_hash_table): Add no_multi_toc, multi_toc_needed,
toc_curr, toc_off and emit_stub_syms.
(ppc64_elf_link_hash_table_create): Init them.
(ppc_stub_name): Correct string size.
(ppc64_elf_check_relocs): Set has_gp_reloc on GOT and TOC relocs.
(ppc64_elf_size_dynamic_sections): Set no_multi_toc if GOT entries
used.
(ppc_type_of_stub): Tweak root.type test.
(build_plt_stub): Remove glink code.  Adjust for insn macro changes.
(ppc_size_one_stub): Handle ppc_stub_long_branch_r2off and
ppc_stub_plt_branch_r2off.
(ppc_build_one_stub): Likewise.  Fix var shadowing.  Correct addis,addi
range test.  Use toc_off to calculte r2 values.  Handle emit_stub_syms.
(ppc64_elf_setup_section_lists): Remove htab creator flavour test.
Initialize elf_gp and toc_curr.
(ppc64_elf_next_toc_section, ppc64_elf_reinit_toc): New functions.
(ppc64_elf_next_input_section): Set toc_off.
(group_sections): Ensure groups have the same TOC.
(ppc64_elf_size_stubs): Check whether we need a TOC adjusting stub.
(ppc64_elf_build_stubs): Add emit_stub_syms param, and stash in htab.
Build new glink stub.
(ppc64_elf_relocate_section): Handle multiple TOCs.  Fix comments.
(ppc64_elf_finish_dynamic_sections): Adjust DT_PPC64_GLINK.
* elf64-ppc.h (ppc64_elf_build_stubs): Update prototype.
(ppc64_elf_next_toc_section, ppc64_elf_reinit_toc): Declare.
* section.c (struct sec): Rename flag12 to has_gp_reloc.
(STD_SECTION): Update.
* ecoff.c (bfd_debug_section): Update comment.
* bfd-in2.h: Regenerate.

* gdb.base/readline.exp: Add tests for operate-and-get-next with a
fully filled history list.
* gdb.base/gdb_history: New file.

* gdb.base/signals.exp: XFAIL "continue to func1" on
i*86-*-freebsd*.

* gdb.base/attach.exp: When trying to attach to a nonexistent
process, make it possible to specify the PID based on the target,
and do so for *-*-freebsd*.

* dwarf2cfi.c, dwarf2cfi.h: Remove.

    * doc/as.texinfo: Document .cfi_rel_offset.

    * dw2gencfi.c (struct cfa_save_data, cfa_save_stack): New.
        (cfi_add_CFA_offset): Detect invalid offsets.
        (cfi_add_CFA_remember_state): Save cur_cfa_offset.
        (cfi_add_CFA_restore_state): Restore it.
        (CFI_rel_offset): New.
        (cfi_pseudo_table): Add it.
        (dot_cfi): Handle it.

        * gas/cfi/cfi-common-1.d, gas/cfi/cfi-common-1.s: New.
        * gas/cfi/cfi-common-2.d, gas/cfi/cfi-common-2.s: New.
        * gas/cfi/cfi-diag-1.d, gas/cfi/cfi-diag-1.s: New.
        * gas/cfi/cfi.exp: Run them.

* gdb/objc-lang.c (FETCH_ARGUMENT): Remove macro.
(OBJC_FETCH_POINTER_ARGUMENT): Shorthand macro for
using FETCH_POINTER_ARGUMENT with Objective-C method arguments.
(find_implementation, resolve_msgsend, resolve_msgsend_stret,
resolve_msgsend_super, resolve_msgsend_super_stret):
Use it.

* gdb.texinfo: Add Objective-C documentation.

daily update

*** empty log message ***

2003-06-07  Andrew Cagney  <cagney@redhat.com>

* symfile.h: Re-indent, clean up comments.

2003-06-07  Andrew Cagney  <cagney@redhat.com>

* inferior.h (deprecated_write_sp): Replace
generic_target_write_sp.
* regcache.c (deprecated_write_sp): Replace
generic_target_write_sp.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Update.
* vax-tdep.c (vax_gdbarch_init): Update.
* v850-tdep.c (v850_gdbarch_init): Update.
* sparc-tdep.c (sparc_gdbarch_init): Update.
* sh-tdep.c (sh_gdbarch_init): Update.
* s390-tdep.c (s390_gdbarch_init): Update.
* rs6000-tdep.c (rs6000_gdbarch_init): Update.
* ns32k-tdep.c (ns32k_gdbarch_init): Update.
* mn10300-tdep.c (mn10300_gdbarch_init): Update.
* mcore-tdep.c (mcore_gdbarch_init): Update.
* m68k-tdep.c (m68k_gdbarch_init): Update.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Update.
* ia64-tdep.c (ia64_gdbarch_init): Update.
* h8300-tdep.c (h8300_gdbarch_init): Update.
* frv-tdep.c (frv_gdbarch_init): Update.
* cris-tdep.c (cris_gdbarch_init): Update.
* config/pa/tm-hppa.h (DEPRECATED_DUMMY_WRITE_SP): Update.

2003-06-07  Andrew Cagney  <cagney@redhat.com>

* dwarf2-frame.c (dwarf2_frame_cache): Add comments on PC_REGNUM.
Assert that PC_REGNUM is valid.
(dwarf2_frame_prev_register): Add comments on SP_REGNUM.

2003-06-07  Andrew Cagney  <cagney@redhat.com>

* gdbarch.sh (TARGET_READ_SP): Add predicate, delete default.
* gdbarch.h, gdbarch.c: Regenerate.
* mn10300-tdep.c: Include "gdb_assert.h".
(mn10300_read_fp): New function.
(mn10300_gdbarch_init): Set deprecated_target_read_fp to
mn10300_read_fp.  Do not set read_sp to generic_target_read_sp.
* ia64-tdep.c: Include "gdb_assert.h".
(ia64_read_fp): New function.
(ia64_gdbarch_init): Set deprecated_target_read_fp to
ia64_read_sp.  Do not set read_sp to generic_target_read_sp.
* regcache.c (generic_target_read_sp): Delete function.
(read_sp): Try TARGET_READ_SP and SP_REGNUM for the SP register.
* inferior.h (generic_target_read_sp): Delete declaration.
* frv-tdep.c (frv_gdbarch_init): Do not set read_sp to
generic_target_read_sp.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Ditto.
* sparc-tdep.c (sparc_gdbarch_init): Ditto
* sh-tdep.c (sh_gdbarch_init): Ditto.
* rs6000-tdep.c (rs6000_gdbarch_init): Ditto.
* Makefile.in (mn10300-tdep.o, ia64-tdep.o): Update dependencies.

2003-06-07  Andrew Cagney  <cagney@redhat.com>

* gdbarch.sh: Comment each field of startup_gdbarch.
* gdbarch.h, gdbarch.c: Re-generate.

2003-06-07  Andrew Cagney  <cagney@redhat.com>

* gdbarch.sh (TARGET_READ_PC): Add predicate, remove default.
* gdbarch.h, gdbarch.c: Re-generate.
* regcache.c: Update comments on read_pc et.al.
(generic_target_read_pc): Delete function.
(read_pc_pid): Try TARGET_READ_PC and PC_REGNUM for a PC register.
* inferior.h (generic_target_read_pc): Delete declaration.
* frv-tdep.c (frv_gdbarch_init): Do not set read_pc to
generic_target_read_pc.
* sparc-tdep.c (sparc_gdbarch_init): Ditto.
* sh-tdep.c (sh_gdbarch_init): Ditto.
* rs6000-tdep.c (rs6000_gdbarch_init): Ditto.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Ditto.

2003-06-07  Andrew Cagney  <cagney@redhat.com>

* elfread.c (elf_symtab_read): Replace "special_local_sym_p" and
"index" with "special_local_sect".  Use strcmp instead of STREQ.
Append period to coments.

2003-06-07  H.J. Lu <hongjiu.lu@intel.com>

* app.c (do_scrub_chars): Add states 14 and 15 to handle
predicate for ia64.

daily update

*** empty log message ***

* elfread.c (elf_symtab_read): Avoid use of SECT_OFF_MAX.
(elfstab_offset_sections): Likewise.
* gdb-stabs.h (stab_section_info): Likewise.
* i386-interix-tdep.c (pei_adjust_objfile_offsets): Likewise.
* objfiles.c (objfile_relocate): Likewise.
* pa64solib.c (pa64_solib_add_solib_objfile): Likewise.
* remote.c (get_offsets): Likewise.
(remote_cisco_objfile_relocate): Likewise.
* somread.c (som_symfile_offsets): Likewise.
* symfile.c (alloc_section_addr_info): New function.
(build_section_addr_info_from_section_tab): Use it.
(free_section_addr_info): Adjust.
(default_symfile_offsets): Avoid use of SECT_OFF_MAX.
(syms_from_objfile): Allocate local_addr dynamically.
(symbol_file_add_with_addrs_or_offsets): Allocate orig_addrs
dynamically.
(add_symbol_file_command): Allocate sect_opts dynamically.
(reread_symbols): Avoid use of SECT_OFF_MAX.
* symfile.h (section_addr_info): Do not use MAX_SECTIONS.
(alloc_section_addr_info): Declare it.
* symtab.h (SIZEOF_SECTION_OFFSETS): Remove.
* win32-nat.c (solib_symbols_add): Allocate section_addrs
dynamically.
* xcoffread.c (xcoff_symfile_offsets): Avoid use of SECT_OFF_MAX.

2003-06-06  Andrew Cagney  <cagney@redhat.com>

Contributed by Red Hat.
* iq2000.cpu: New file.  Written by Ben Elliston, Jeff Johnston,
Stan Cox, and Frank Ch. Eigler.
* iq2000.opc: New file.  Written by Ben Elliston, Frank
Ch. Eigler, Chris Moller, Jeff Johnston, and Stan Cox.
* iq2000m.cpu: New file.  Written by Jeff Johnston.
* iq10.cpu: New file.  Written by Jeff Johnston.

2003-06-06  Andrew Cagney  <cagney@redhat.com>

* d10v-tdep.c (struct d10v_unwind_cache): Delete "return_pc".
(d10v_frame_unwind_cache): Do not set "return_pc".

2003-06-06  Michael Snyder  <msnyder@redhat.com>

* h8300-tdep.c: Make tidy (long lines).

Fix changelog, contained more than happened.

2003-06-06  Michal Ludvig  <mludvig@suse.cz>

* x86-64-tdep.c (x86_64_fill_fxsave): Pass correct regnums
to regcache_collect().

.

2003-06-05  Roland McGrath  <roland@redhat.com>

* emultempl/elf32.em (gld${EMULATION_NAME}_list_options): Remove
extra \t in -z noexecstack line.

* elfcode.h (elf_slurp_reloc_table_from_section): Don't dereference
NULL function pointers.

    * hppa-hpux-tdep.c (hppa_hpux_init_abi): New function, setting
        pc_in_sigtramp multiarch method.
        (hppa_hpux_som_init_abi): Use it.
        (hppa_hpux_elf_init_abi): Likewise.
        * config/pa/tm-hppah.h (PC_IN_SIGTRAMP): Remove, now that this
        macro has been multiarched.
        * config/pa/tm-hppa64.h (PC_IN_SIGTRAMP): Temporarily set this
        macro here, as hppa64 isn't multiarched yet.

*** empty log message ***

daily update

    * config/pa/tm-hppa.h: Delete some unused macros. Move some
        macro definitions from here...
        * hppa-tdep.c: ...to there.

2003-06-05  Andrew Cagney  <cagney@redhat.com>

* Makefile.in (value_h): Add $(frame_h).
* value.h: Include "frame.h".
(struct value): Replace "frame_addr" with "frame_id".
(VALUE_FRAME_ID): Replace VALUE_FRAME.
* values.c (allocate_value): Use VALUE_FRAME_ID.
(value_copy): Use VALUE_FRAME_ID.
* findvar.c (value_from_register): Use VALUE_FRAME_ID.
* valops.c (value_assign): Update.  Use frame_find_by_id.

an obvious fix

2003-06-05  Michal Ludvig  <mludvig@suse.cz>

* x86-64-tdep.c (x86_64_push_arguments): Don't clear offset
in each pass.

2003-06-05  Michael Snyder  <msnyder@redhat.com>

* config/tc-h8sx.c (get_specific): Distinguish h8h from h8s ops.
(build_bytes): Ditto.

2003-06-05  Richard Sandiford  <rsandifo@redhat.com>

* config/tc-h8sx.c (DMODE): Remove.
(colonmod24): Don't choose a default if the operand is a 16-bit
constant integer.
(fix_operand_size): New function.
(md_assemble): Use it to choose between @(d:2, ERn) and @(d:16,ERn).
Adjust @(d:2,ERn) operands before choosing the specific opcodes.

2003-06-05  Michael Snyder  <msnyder@redhat.com>

* gas/h8300/t01_mov.s: New file, tests mov instructions.
* gas/h8300/t02_mova.s: New file, tests mova instructions.
* gas/h8300/t03_add.s: New file, tests add instructions.
* gas/h8300/t04_sub.s: New file, tests sub instructions.
* gas/h8300/t05_cmp.s: New file, tests cmp instructions.
* gas/h8300/t06_ari2.s: New file, tests arithmetic instructions.
* gas/h8300/t07_ari3.s: New file, tests arithmetic instructions.
* gas/h8300/t08_or.s: New file, tests or instructions.
* gas/h8300/t09_xor.s: New file, tests xor instructions.
* gas/h8300/t10_and.s: New file, tests and instructions.
* gas/h8300/t11_logs.s: New file, tests logical instructions.
* gas/h8300/t12_bit.s: New file, tests bit instructions.
* gas/h8300/t13_otr.s.s: New file, tests misc. instructions.
* gas/h8300/t01_mov.exp: New file.
* gas/h8300/t02_mova.exp: New file.
* gas/h8300/t03_add.exp: New file.
* gas/h8300/t04_sub.exp: New file.
* gas/h8300/t05_cmp.exp: New file.
* gas/h8300/t06_ari2.exp: New file.
* gas/h8300/t07_ari3.exp: New file.
* gas/h8300/t08_or.exp: New file.
* gas/h8300/t09_xor.exp: New file.
* gas/h8300/t10_and.exp: New file.
* gas/h8300/t11_logs.exp: New file.
* gas/h8300/t12_bit.exp: New file.
* gas/h8300/t13_otr.exp: New file.

2003-06-03  Michael Snyder  <msnyder@redhat.com>

* h8sx.h (enum h8_model): Add AV_H8S to distinguish from H8H.
(ldc): Split ccr ops from exr ops (which are only available
on H8S or H8SX).
(stc): Ditto.
(andc, orc, xorc): Ditto.
(ldmac, stmac, clrmac, mac): Change access to AV_H8S.

2003-06-05  Jeff Johnston  <jjohnstn@redhat.com>

        * thread-db.c (check_event): For create/death event breakpoints,
        loop through all messages to ensure that we read the message
        corresponding to the breakpoint we are at.

merge from gcc

Add code to handle even-numbered only register operands

* linux-low.c (linux_wait_for_event): Correct comment typos.
(linux_resume_one_process): Call check_removed_breakpoint.
(linux_send_signal): New function.
(linux_target_ops): Add linux_send_signal.
* remote-utils.c (putpkt, input_interrupt): Use send_signal instead
of kill.
* target.h (struct target_ops): Add send_signal.

* simple.c (bfd_simple_get_relocated_section_contents): Call
_bfd_generic_link_add_symbols instead of bfd_link_add_symbols.

2003-06-05  Michal Ludvig  <mludvig@suse.cz>

* dw2gencfi.c (cfi_add_CFA_insn, cfi_add_CFA_insn_reg)
(cfi_add_CFA_insn_reg_reg, cfi_add_CFA_insn_reg_offset): New.
(cfi_add_CFA_offset, cfi_add_CFA_def_cfa)
(cfi_add_CFA_register, cfi_add_CFA_def_cfa_register)
(cfi_add_CFA_def_cfa_offset): Use cfi_add_CFA_insn_*().
(cfi_add_CFA_restore, cfi_add_CFA_undefined)
(cfi_add_CFA_same_value, cfi_add_CFA_remember_state)
(cfi_add_CFA_restore_state, cfi_add_CFA_nop): New.
(cfi_pseudo_table): New directives .cfi_return_column,
.cfi_restore, .cfi_undefined, .cfi_same_value,
.cfi_remember_state, .cfi_restore_state, .cfi_nop.
(dot_cfi, output_cfi_insn): Handle new directives.
* dw2gencfi.h (cfi_add_CFA_restore, cfi_add_CFA_undefined)
(cfi_add_CFA_same_value, cfi_add_CFA_remember_state)
(cfi_add_CFA_restore_state, cfi_add_CFA_nop): New prototypes.

    * dw2gencfi.c (output_cfi_insn): Fix typo for negative offsets.

    * dw2gencfi.c (cfi_finish): Set .eh_frame read-only.

    * config/tc-alpha.c (s_alpha_usepv): New.
        (md_pseudo_table): Add it.
        (alpha_cfi_frame_initial_instructions): New.
        * config/tc-alpha.h (TARGET_USE_CFIPOP): New.
        (tc_cfi_frame_initial_instructions): New.
        * doc/c-alpha.texi: Document .usepv.

        * gas/alpha/elf-usepv-1.[sd]: New.
        * gas/alpha/elf-usepv-2.[sd]: New.
        * gas/alpha/alpha.exp: Run them.
        * gas/cfi/cfi-alpha-3.[sd]: New.
        * gas/cfi/cfi.exp: Run it.

2003-06-04  Michael Snyder  <msnyder@redhat.com>

* h8300-tdep.c (h8300_gdbarch_init): Add h8300hn, h8300sn.

2003-06-04  Michael Snyder  <msnyder@redhat.com>

* compile.c (sim_info): Fix typo in output.

* h8300/compile.c (set_h8300h): Replace 'flag' arguments
with a bfd_machine argument, and decode it inline.
Check for bfd_mach_h8300hn and bfd_mach_h8300sn.

2003-06-04  Michael Snyder  <msnyder@redhat.com>

* common/run.c (main): Remove SIM_H8300 ifdef.
(usage): Ditto.
* common/sim-options.c (STANDARD_OPTIONS): Add SIM_H8300SX.
(standard_options): Add '-x' for h8/300sx.
(standard_option_handler): Add case for SIM_H8300SX.

*** empty log message ***

* dwarf2-frame.c (struct comp_unit): Add member `dbase'.
(read_encoded_value): Handle DW_EH_PE_datarel encoding.
(dwarf2_build_frame_info): Set base for DW_EH_PE_datarel encodings
when handling .eh_frame sections.

    * config/pa/nm-hppah.h (PREPARE_TO_PROCEED): Use the generic
        prepare_to_proceed procedure instead of the hppa-specific one.
        * hppa-tdep.c (hppa_prepare_to_proceed): Remove, no longer used.

2003-06-04  Jeff Johnston  <jjohnstn@redhat.com>

        * acconfig.h: Add HAVE_TKILL_SYSCALL definition check.
        * config.in: Regenerated.
        * configure.in: Add test for syscall function and check for
        __NR_tkill macro in <syscall.h> to set HAVE_TKILL_SYSCALL.
        * configure: Regenerated.
        * lin-lwp.c [HAVE_TKILL_SYSCALL]: Include <unistd.h> and
        <sys/syscall.h>.
        (kill_lwp): New function that uses tkill syscall or
        uses kill, depending on whether threading model is nptl or not.
        All callers of kill() changed to use kill_lwp().
        (lin_lwp_wait): Make special check when WIFEXITED occurs to
        see if all threads have already exited in the nptl model.
        (stop_and_resume_callback): New callback function used by the
        lin_lwp_wait thread exit handling code.
        (stop_wait_callback): Check for threads already having exited and
        delete such threads fromt the lwp list when discovered.
        (stop_callback): Don't assert retcode of kill call.

        Roland McGrath  <roland@redhat.com>
        * i386-linux-nat.c (ps_get_thread_area): New function needed by
        nptl libthread_db.

2003-06-04  Michael Snyder  <msnyder@redhat.com>

* compile.c (sim_info): Fix typo in output.

* as.c (show_usage): Document --execstack and --noexecstack.
(parse_args): Add --execstack and --noexecstack.
(main): Create .note.GNU-stack section if --execstack or
--noexecstack was given on comand line, set its SHF_EXECINSTR bit.
* as.h (flag_execstack, flag_noexecstack): New.

    * alpha-tdep.c (alpha_next_pc): Use alpha_read_insn.
        (alpha_sigtramp_frame_this_id): Use get_frame_memory.
        (alpha_sigtramp_frame_prev_register): Likewise.
        (alpha_heuristic_frame_prev_register): Likewise.
        * alpha-mdebug-tdep.c (alpha_mdebug_frame_prev_register): Likewise.

    * alpha-mdebug-tdep.c (alpha_mdebug_after_prologue): Use
        alpha-specific register id names.
        (alpha_mdebug_frame_unwind_cache): Likewise.
        (alpha_mdebug_frame_prev_register): Likewise.

Moved the ticoff0/1 swaptables and coff0/1 bad format hooks to coffcode.h

Altered the CREATE_xxx_COFF_TARGET_VEC macro arguments -- changelog dropped out

Altered the CREATE_xxx_COFF_TARGET_VEC macro arguments

Fixed initialization bug

2003-06-03  Chris Demetriou  <cgd@broadcom.com>

        * config/tc-mips.c: (OPTION_ARCH_BASE, OPTION_ASE_BASE)
        (OPTION_COMPAT_ARCH_BASE, OPTION_FIX_BASE)
        (OPTION_MISC_BASE): New defines.
        (OPTION_BREAK, OPTION_CONSTRUCT_FLOATS, OPTION_EB, OPTION_EL)
        (OPTION_ELF_BASE, OPTION_FIX_VR4122, OPTION_FP32, OPTION_FP64)
        (OPTION_GP32, OPTION_GP64, OPTION_M3900, OPTION_M4010, OPTION_M4100)
        (OPTION_M4650, OPTION_M7000_HILO_FIX, OPTION_MARCH, OPTION_MDMX)
        (OPTION_MEMBEDDED_PIC, OPTION_MIPS1, OPTION_MIPS16, OPTION_MIPS2)
        (OPTION_MIPS3, OPTION_MIPS32, OPTION_MIPS32R2, OPTION_MIPS3D)
        (OPTION_MIPS4, OPTION_MIPS5, OPTION_MIPS64)
        (OPTION_MNO_7000_HILO_FIX, OPTION_MTUNE, OPTION_NO_CONSTRUCT_FLOATS)
        (OPTION_NO_FIX_VR4122, OPTION_NO_M3900, OPTION_NO_M4010)
        (OPTION_NO_M4100, OPTION_NO_M4650, OPTION_NO_MDMX, OPTION_NO_MIPS16)
        (OPTION_NO_MIPS3D, OPTION_NO_RELAX_BRANCH, OPTION_RELAX_BRANCH)
        (OPTION_TRAP): Redefine in terms of new defines.
        (md_longopts): Reorder entries.

    * alpha-tdep.c (alpha_dwarf2_init_abi): New.
        * alpha-tdep.h (alpha_dwarf2_init_abi): Declare it.
        * alpha-linux-tdep.c (alpha_linux_init_abi): Use it.
        * alphafbsd-tdep.c (alphafbsd_init_abi): Register dwarf2 and mdebug
        unwind routines.
        * alphanbsd-tdep.c (alphanbsd_init_abi): Likewise.
        * config/alpha/fbsd.mt (TDEPFILES): Add alpha-mdebug-tdep.o.
        * config/alpha/nbsd.mt (TDEPFILES): Likewise.

        * alpha-linux-tdep.c: Remove unnecessary includes.
        * Makefile.in (alpha-linux-tdep.o): Update.

    * alphabsd-tdep.c (alphabsd_supply_fpreg): Fix typo last change.
        (alphabsd_fill_fpreg): Likewise.

    * alphanbsd-tdep.c (alphanbsd_sigcontext_addr):  Replace
        references to struct frame_info fields by calls to the equivalent
        accessors. Necessary now that frame_info is opaque.

    * alphanbsd-tdep.c (alphanbsd_skip_sigtramp_frame): Delete.
        (alphanbsd_init_abi): Do not set skip_sigtramp_frame in tdep
        structure, field no longer exists.

    * config/alpha/alpha-osf1.mt (TDEPFILES): Add alpha-mdebug-tdep.o.
        * alpha-osf1-tdep.c (alpha_osf1_init_abi): Enable the mdebug module.

    * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Replace
        references to struct frame_info fields by calls to the equivalent
        accessors. Necessary now that frame_info is opaque.

    * alpha-osf1-tdep.c (alpha_osf1_skip_sigtramp_frame): Delete.
        (alpha_osf1_init_abi): Do not set skip_sigtramp_frame in tdep
        structure, field no longer exists.