Minkyu Kang [Tue, 28 Jul 2009 04:29:43 +0000 (13:29 +0900)]
s5pc1xx: usb: change name s3c to s5p
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 28 Jul 2009 04:28:50 +0000 (13:28 +0900)]
s5pc1xx: remove unused definitions
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 28 Jul 2009 02:28:32 +0000 (11:28 +0900)]
s5pc1xx: uart: revert hard code
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 28 Jul 2009 02:24:32 +0000 (11:24 +0900)]
s5pc110: fix clocks
set correct mask of MPLL, EPLL, VPLL
get HCLKs: Msys, Dsys, Psys
get PCLKs: Msys, Dsys, Psys
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 23:27:41 +0000 (08:27 +0900)]
s5pc110: I2C code cleanup
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 23:25:57 +0000 (08:25 +0900)]
s5pc110: I2C support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 11:29:31 +0000 (20:29 +0900)]
Merge branch 'master' of kmpark@party:/pub/git/u-boot-s5pc1xx
Minkyu Kang [Mon, 27 Jul 2009 11:35:54 +0000 (20:35 +0900)]
Merge branch 'master' of prom@party:/pub/git/u-boot-s5pc1xx
Minkyu Kang [Mon, 27 Jul 2009 11:35:37 +0000 (20:35 +0900)]
s5pc1xx: set correct arm clock
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 11:29:26 +0000 (20:29 +0900)]
Merge branch 'master' of git://git.denx.de/u-boot
Conflicts:
drivers/video/Makefile
include/lcd.h
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 11:09:08 +0000 (20:09 +0900)]
OneNAND: Reduce display message
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 11:05:10 +0000 (20:05 +0900)]
s5pc110: clock: Fix clock calculation
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 11:04:47 +0000 (20:04 +0900)]
s5pc100: OneNAND: LSI OneNAND code
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 10:42:42 +0000 (19:42 +0900)]
s5pc100: Fix compile error with clock base
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 10:40:42 +0000 (19:40 +0900)]
s5pc100: universal: Use r0 for clock base
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 09:03:39 +0000 (18:03 +0900)]
OneNAND: Fix oobdump and display force message
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Wolfgang Denk [Mon, 27 Jul 2009 08:37:37 +0000 (10:37 +0200)]
Prepare 2009.08-rc1 (again, after fixing last minute issues).
Update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 27 Jul 2009 08:06:39 +0000 (10:06 +0200)]
cpu/arm920t/start.S: include <common.h> to have ROUND() defined
Commit
fcd3c87e made include/common.h usable by assembler code but
failed to update cpu/arm920t/start.S
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 27 Jul 2009 08:01:11 +0000 (10:01 +0200)]
at91cap9adk: fix #ifdef/#endif pairing (2nd try)
Commit
7024aa14 was supposed to fix the #ifdef/#endif pairing in
include/configs/at91cap9adk.h, but did not cate all problems.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 27 Jul 2009 07:58:14 +0000 (09:58 +0200)]
Fix include/common.h for boards with CONFIG_STATUS_LED
The reordering of include/common.h by commit
fcd3c87e495f3c48 broke
boards with status LED support, resulting in
error: #error Status LED configuration missing
errors. Undo this reordering to avoid this issue.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Minkyu Kang [Mon, 27 Jul 2009 07:23:08 +0000 (16:23 +0900)]
s5pc1xx: clock: avoid the possibility of overflow
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Wolfgang Denk [Mon, 27 Jul 2009 07:19:15 +0000 (09:19 +0200)]
ABI: fix build problems due to now needed div64 routine.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 27 Jul 2009 06:50:59 +0000 (08:50 +0200)]
PMC405DE: fix out of tree building
Signed-off-by: Wolfgang Denk <wd@denx.de>
Minkyu Kang [Mon, 27 Jul 2009 05:41:51 +0000 (14:41 +0900)]
Merge branch 'master' of prom@party:/pub/git/u-boot-s5pc1xx
Minkyu Kang [Mon, 27 Jul 2009 05:41:12 +0000 (14:41 +0900)]
s5pc1xx: clock: s5pc110 support
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 05:32:39 +0000 (14:32 +0900)]
s5pc100: universal: Fix OneNAND IPL boot
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 04:43:29 +0000 (13:43 +0900)]
s5pc100: Use S5PC1XX for common prefix
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 04:39:18 +0000 (13:39 +0900)]
s5pc100: universal: Update Copyright
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 02:31:53 +0000 (11:31 +0900)]
s5pc110: universal: DMC support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 00:31:45 +0000 (09:31 +0900)]
s5pc110: timers: s5pc110 timer support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Mon, 27 Jul 2009 00:31:23 +0000 (09:31 +0900)]
s5pc1xx: Add cpu_id default as s5pc100
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Sun, 26 Jul 2009 23:49:11 +0000 (08:49 +0900)]
s5pc110: universal: Read correct H/W revision
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Wolfgang Denk [Sun, 26 Jul 2009 22:24:55 +0000 (00:24 +0200)]
Prepare 2009.08-rc1
Update CHANGELOG, minor coding style fix.
Signed-off-by: Wolfgang Denk <wd@denx.de>
rhabarber1848@web.de [Fri, 24 Jul 2009 06:16:30 +0000 (08:16 +0200)]
add WATCHDOG_RESET to allow LZMA kernel decompression on slow machines
Signed-off-by: rhabarber1848@web.de
Niklaus Giger [Thu, 23 Jul 2009 21:31:58 +0000 (23:31 +0200)]
Less verbose output when loading vxworks 6.x images
Loading vxWorks 5.x images resulted just into 3 or 4 lines of output.
With vxWorks 6.x and the new GCC it emits about 30 lines, which is
far too noisy in my opinion.
Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
Wolfgang Denk [Thu, 23 Jul 2009 22:17:48 +0000 (00:17 +0200)]
Make include/common.h usable by assembler code
Commit
70ebf316 factored out the ROUND() macro into include/common.h,
not realizing that the primary use of this macro on AT91 systems was
in start.S where common.h was not included, and could not be included
because it contains a lot of C code which the assembler doesn't
understand.
This patch wraps such code in common.h in a "#ifndef __ASSEMBLY__"
construct, and then adds an include to cpu/arm926ejs/start.S thus
solving the problem.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Heiko Schocher [Thu, 23 Jul 2009 11:27:04 +0000 (13:27 +0200)]
arm: add _lshrdi3.S
Signed-off-by: Heiko Schocher <hs@denx.de>
Wolfgang Denk [Thu, 23 Jul 2009 11:15:59 +0000 (13:15 +0200)]
Make linking against libgcc configurable
Many (especially ARM) tool chains seem to come with broken or
otherwise unusable (for the purposes of builing U-Boot) run-time
support libraries `libgcc.a'. By using the "USE_PRIVATE_LIBGCC"
setting we allow to use alternative libraries instead.
"USE_PRIVATE_LIBGCC" can either be set as an environment variable in
the shell, or as a command line argument when running "make", i. e.
$ make USE_PRIVATE_LIBGCC=yes
or
$ USE_PRIVATE_LIBGCC=yes
$ export USE_PRIVATE_LIBGCC
$ make
The value of "USE_PRIVATE_LIBGCC" is the name of the directory which
contains the alternative run-time support library `libgcc.a'. The
special value "yes" selects the directory $(OBJTREE)/lib_$(ARCH) .
Note that not all architectures provide an alternative `libgcc.a' in
their lib_$(ARCH) directories - so far, only ARM does.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
cc: Stefan Roese <sr@denx.de>
Dirk Behme [Wed, 22 Jul 2009 15:51:56 +0000 (17:51 +0200)]
Use do_div from div64.h for vsprintf
Use do_div from div64.h for vsprintf in case of 64bit division.
For 32bit division, do_div from div64.h can't be used as it
needs a 64bit parameter.
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Acked-by: Stefan Roese <sr@denx.de>
CC: Simon Kagstrom <simon.kagstrom@netinsight.net>
Kyungmin Park [Mon, 20 Jul 2009 00:47:47 +0000 (09:47 +0900)]
Fix compiler warnings after loff_t change
Now 'env_addr' type is loff_t so use correct field type.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Wolfgang Denk [Sun, 26 Jul 2009 21:28:02 +0000 (23:28 +0200)]
Revert "ppc: Unlock cache-as-ram in a consistent manner"
This reverts commit
982adfc610669482a32127282fe489857a92cfe3.
This patch causes problems on MPC83xx boards - flash recognition stops
working.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 26 Jul 2009 21:15:57 +0000 (23:15 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-video
Wolfgang Denk [Sun, 26 Jul 2009 20:57:11 +0000 (22:57 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-blackfin
Wolfgang Denk [Sun, 26 Jul 2009 20:54:23 +0000 (22:54 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx
Wolfgang Denk [Sun, 26 Jul 2009 20:44:27 +0000 (22:44 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-usb
Jens Scharsig [Fri, 24 Jul 2009 08:31:48 +0000 (10:31 +0200)]
update the EB+MCF-EV123 board support
This patch updates the support for EB+MCF-EV123 board and needs
the [PATCH 1/2 V3] new video driver for bus vcxk framebuffers
* remove the board framebuffer driver
* use the common bus_vcxk framebuffer driver
* adds bmp support
* adds splashimage support
* fix serveral cosmetical errors
Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
[agust@denx.de: fixed some style issues before applying]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Anatolij Gustschin [Sun, 26 Jul 2009 10:05:25 +0000 (12:05 +0200)]
video: bus_vcxk.c: fix style issues added by
50217dee
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Jens Scharsig [Fri, 24 Jul 2009 08:09:02 +0000 (10:09 +0200)]
new video driver for bus vcxk framebuffers
This patch adds a new video driver
* adds common bus_vcxk framebuffer driver
Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
[agust@denx.de: fixed lots of style issues before applying]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Alessandro Rubini [Tue, 21 Jul 2009 12:09:45 +0000 (14:09 +0200)]
lcd.h: define extern vidinfo_t for all cases
include/lcd.h has different vidinfo for different platforms,
and several extern declaration, but one for the default case was
missing. This makes them a single extern declaration for everyone.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Anatolij Gustschin [Sun, 26 Jul 2009 09:04:59 +0000 (11:04 +0200)]
mimc200.c: fix too long lines added by
f68378d6
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Mark Jackson [Tue, 21 Jul 2009 10:35:22 +0000 (11:35 +0100)]
Add LCD support to MIMC200 board
This patch updates the MIMC200 files to enable the LCD.
Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
Mark Jackson [Tue, 21 Jul 2009 10:18:44 +0000 (11:18 +0100)]
Add 16bit colour support in lcd.h
This patch adds support for LCD_COLOR16 in include/lcd.h.
Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
Anatolij Gustschin [Sun, 26 Jul 2009 08:34:58 +0000 (10:34 +0200)]
lib_avr32/board.c: fix too long line added by
716ece1d
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Mark Jackson [Tue, 21 Jul 2009 10:11:37 +0000 (11:11 +0100)]
Add AVR32 LCD support
This patch adds support for the AVR32 LCD controller. This patch is
based off the latest u-boot-video.
A quick summary of what's going on:-
Enable LCDC pixel clock
Enable LCDC port pins
Add framebuffer pointer to global_data struct
Allocate framebuffer
To use the new code, update your board config to include something like
this:-
#define CONFIG_LCD 1
#if defined(CONFIG_LCD)
#define CONFIG_CMD_BMP
#define CONFIG_ATMEL_LCD 1
#define LCD_BPP LCD_COLOR16
#define CONFIG_BMP_16BPP 1
#define CONFIG_FB_ADDR 0x10600000
#define CONFIG_WHITE_ON_BLACK 1
#define CONFIG_VIDEO_BMP_GZIP 1
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE 262144
#define CONFIG_ATMEL_LCD_BGR555 1
#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
#define CONFIG_SPLASH_SCREEN 1
#endif
The standard U-Boot BMP and Splash-screen features should just work.
Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
[agust@denx.de: fixed some style issues]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Alessandro Rubini [Sun, 19 Jul 2009 15:52:27 +0000 (17:52 +0200)]
video: move extern declarations from C to headers
This moves some extern declaration from lcd.c to lcd.h, removing
unneeded ifdef around a pair of them. Additionally, since
gunzip_bmp() was declared static in cmd_bmp.c but extern in lcd.c, I
removed the static. The extra "#include <lcd.h>" in cmd_bmp.c is
added to ensure the header is consistent with the source.
This has been compile-tested on both ARM (at91 boards) and PowerPC
(HH405_config, TQM823L_LCD_config, mcc200_config), to test all use
combinations.
Signed-off-by: Alessandro Rubini <rubini@gnudd.it>
[agust@denx.de: removed gunzip_bmp() fixes as commit
c01171ea did it]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Mike Frysinger [Thu, 23 Jul 2009 20:26:58 +0000 (16:26 -0400)]
Blackfin: restore EVT1 handling in linker script
Sadly, the Blackfin linker script unification lost a small #ifdef logic
needed on older parts. Restore that CONFIG_BFIN_BOOTROM_USES_EVT1 logic.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Wolfgang Denk [Fri, 24 Jul 2009 12:24:07 +0000 (14:24 +0200)]
Revert "zlib: updated to v.1.2.3"
This reverts commit
b201171f2b4d509f3ad510b214bee70ff902e3d6.
The commit caused problems for example when unpacking kernel images:
Uncompressing Kernel Image ... Error: inflate() returned -2
GUNZIP: uncompress, out-of-mem or overwrite error - must
RESET board to recover
Conflicts:
include/u-boot/zlib.h
lib_generic/zlib.c
Signed-off-by: Wolfgang Denk <wd@denx.de>
Minkyu Kang [Fri, 24 Jul 2009 11:20:04 +0000 (20:20 +0900)]
s5pc1xx: uart: renamed s5pc100.c -> serial_s5pc1xx.c
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Fri, 24 Jul 2009 11:15:34 +0000 (20:15 +0900)]
s5pc1xx: read cpu id before uart init
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Fri, 24 Jul 2009 10:54:41 +0000 (19:54 +0900)]
s5pc110: uart: support s5pc110
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Fri, 24 Jul 2009 08:59:40 +0000 (17:59 +0900)]
s5pc100: universal: Handle s5pc100 & s5pc110
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
daeinki [Fri, 24 Jul 2009 08:45:35 +0000 (17:45 +0900)]
Merge branch 'master' of daeinki@10.89.8.158:/pub/git/u-boot-s5pc1xx
daeinki [Fri, 24 Jul 2009 08:44:37 +0000 (17:44 +0900)]
s5pc100: Modified Gamma setting of TL2796 LCD Panel.
Signed-off-by: daeinki <inki.dae@samsung.com>
Stefan Roese [Tue, 21 Jul 2009 12:06:29 +0000 (14:06 +0200)]
ppc4xx: Add chip_config command to AMCC Kilauea eval board
This patch removes the "alterpll" command and replaces it with the now
ppc4xx standard "chip_config" command to configure the I2C bootstrap
EEPROM.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 21 Jul 2009 12:33:52 +0000 (14:33 +0200)]
ppc4xx: Fix EEPROM configuration on Kilauea
Kilauea has an AT24C02 EEPROM which has an 8 byte page. Without defining
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS to 3 the "eeprom" command doesn't
work correctly.
Additionally the page write delay (CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
is set to a more defensive value of 10ms.
Signed-off-by: Stefan Roese <sr@denx.de>
Minkyu Kang [Fri, 24 Jul 2009 07:44:50 +0000 (16:44 +0900)]
s5pc110: get correct pro_id
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Fri, 24 Jul 2009 06:17:31 +0000 (15:17 +0900)]
usb: remove dulicated code
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Fri, 24 Jul 2009 05:55:16 +0000 (14:55 +0900)]
usb: support modem partition download
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Fri, 24 Jul 2009 05:54:35 +0000 (14:54 +0900)]
Revert "s5pc100: Modified env variable of s5pc100_universal.h"
This reverts commit
d8f58902e6eb03c2fcca0e0f0a1285bf165dae1c.
daeinki [Fri, 24 Jul 2009 05:46:21 +0000 (14:46 +0900)]
s5pc100: Modified env variable of s5pc100_universal.h
It can use UBIFS booting in TRACE32.
Signed-off-by: daeinki <inki.dae@samsung.com>
Kyungmin Park [Fri, 24 Jul 2009 05:25:07 +0000 (14:25 +0900)]
Merge branch 'master' of git://git.denx.de/u-boot
Matthias Fuchs [Wed, 22 Jul 2009 11:56:21 +0000 (13:56 +0200)]
ppc4xx: Add 405EP based PMC405DE board
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
Matthias Fuchs [Mon, 20 Jul 2009 10:15:38 +0000 (12:15 +0200)]
ppc4xx: Add struct for 4xx GPIO controller registers
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
Matthias Fuchs [Wed, 22 Jul 2009 15:27:56 +0000 (17:27 +0200)]
ppc4xx: Replace 4xx lowercase SPR references
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Mon, 20 Jul 2009 04:57:27 +0000 (06:57 +0200)]
Add "chip_config" command for PPC4xx bootstrap configuration
This patch adds a generic command for programming I2C bootstrap
eeproms on PPC4xx. An implementation for Canyonlands board is
included.
The command name is intentionally chosen not to be PPC4xx specific.
This way other CPU's/SoC's can implement a similar command under
the same name, perhaps with a different syntax.
Usage on Canyonlands:
=> chip_config
Available configurations (I2C address 0x52):
600-nor - NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100
600-nand - NAND CPU: 600 PLB: 200 OPB: 100 EBC: 100
800-nor - NOR CPU: 800 PLB: 200 OPB: 100 EBC: 100
800-nand - NAND CPU: 800 PLB: 200 OPB: 100 EBC: 100
1000-nor - NOR CPU:1000 PLB: 200 OPB: 100 EBC: 100
1000-nand - NAND CPU:1000 PLB: 200 OPB: 100 EBC: 100
1066-nor - NOR CPU:1066 PLB: 266 OPB: 88 EBC: 88 ***
1066-nand - NAND CPU:1066 PLB: 266 OPB: 88 EBC: 88
=> chip_config 600-nor
Using configuration:
600-nor - NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100
done (dump via 'i2c md 52 0.1 10')
Reset the board for the changes to take effect
Other 4xx boards will be migrated to use this command soon
as well.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Peter Tyser [Sat, 18 Jul 2009 00:01:16 +0000 (19:01 -0500)]
xpedite1k: Move to X-ES vendor directory
The XPedite1000 is an X-ES product thus it can be put in board/xes along
with other X-ES boards. Along with the move, the board was renamed to
XPedite1000 from XPedite1K to fit X-ES's standard naming convention.
Maintainership was also transfered to Peter Tyser.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Peter Tyser [Sat, 18 Jul 2009 00:01:15 +0000 (19:01 -0500)]
xpedite1k: Sync checkboard() with other X-ES boards
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Peter Tyser [Sat, 18 Jul 2009 00:01:14 +0000 (19:01 -0500)]
xpedite1k: Sync up board config options with other X-ES boards
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Peter Tyser [Sat, 18 Jul 2009 00:01:13 +0000 (19:01 -0500)]
xpedite1k: Sync organization of board config with other X-ES boards
This change should have no functional effect
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Peter Tyser [Sat, 18 Jul 2009 00:01:12 +0000 (19:01 -0500)]
xpedite1k: Sync up commands and environment with other X-ES boards
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Peter Tyser [Sat, 18 Jul 2009 00:01:11 +0000 (19:01 -0500)]
xpedite1k: Disable unused ethernet port 1
The XPedite1000 only has 2 available ethernet ports:
ppc_4xx_eth2 (EMAC2) and ppc_4xx_eth3 (EMAC3)
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Peter Tyser [Sat, 18 Jul 2009 00:01:10 +0000 (19:01 -0500)]
xpedite1k: Store environment in flash
Previously an I2C EEPROM was used. The EEPROM had size, reliability,
and access issues which are resolved by storing the environment in
flash.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Peter Tyser [Sat, 18 Jul 2009 00:01:09 +0000 (19:01 -0500)]
xpedite1k: Add support for additional GPIO pins
Enable GPIO pins for an I2C EEPROM write protect, a system reset pin,
and a PMC #MONARCH pin. These pins are not currently used in U-Boot,
but are used in OSes and may be used in U-Boot in the future.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Peter Tyser [Sat, 18 Jul 2009 00:01:08 +0000 (19:01 -0500)]
xpedite1k: Add support for optional flashes
The XPedite1000 can be built with 4 total flashes:
- 512KB AMD socketed
- 16MB Intel soldered
- 2 x 32MB AMD MirrorBit flashes
Add support for the optional 2 32MB CFI-compliant AMD flashes
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Peter Tyser [Sat, 18 Jul 2009 00:01:07 +0000 (19:01 -0500)]
xpedite1k: Cleanup coding style
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Peter Tyser [Sat, 18 Jul 2009 00:01:06 +0000 (19:01 -0500)]
xpedite1k: Remove support for reading MACs from EEPROM
By default, the XPedite1000 comes installed with xMon, a proprietary
bootloader. xMon stores its MAC address in an onboard EEPROM. Rather
than requiring a non-standard location in the EEPROM to be reserved for
MAC addresses, store the MAC addresses in U-Boot's standard environment.
A U-Boot application or OS application can be used to migrate xMon MAC
addresses to U-Boot's environment if necessary.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Peter Tyser [Sat, 18 Jul 2009 00:01:05 +0000 (19:01 -0500)]
xpedite1k: Remove support for fixed SDRAM configuration
All XPedite1000's have SPD EEPROMs present and no fixed configuration
parameters are currently defined or used
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Peter Tyser [Sat, 18 Jul 2009 00:01:04 +0000 (19:01 -0500)]
xpedite1k: Remove CONFIG_SYS_DRAM_TEST support
POST or command line tests provide similar functionality
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Peter Tyser [Sat, 18 Jul 2009 00:01:03 +0000 (19:01 -0500)]
xpedite1k: Use standard CFI flash driver
Using the CFI flash driver will allow write access to the 16MB Intel
StrataFlash present on the XPedite1000. The 512KB socketed (non
CFI-compliant flash) will no longer be writable.
The mapping of the 16MB Strata flash was moved to 0xff000000 and the
512KB AMD socketed flash was moved to 0xfe000000.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Matthias Fuchs [Thu, 16 Jul 2009 20:13:57 +0000 (22:13 +0200)]
ppc4xx: Cleanup PLU405 board code
Some Coding style cleanup (braces, whitespaces, long lines)
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
Dirk Eibach [Fri, 17 Jul 2009 12:16:40 +0000 (14:16 +0200)]
ppc4xx: Add DL-Vision 405EP board support
Board support for the Guntermann & Drunck DL-Vision.
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Dirk Eibach [Fri, 10 Jul 2009 12:47:32 +0000 (14:47 +0200)]
ppc4xx: Fix missing freqOPB for 405EP
In cpu/ppc4xx/speed.c initialization of sysInfo->freqOPB for 405EP was
left out for no obvious reason.
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 14 Jul 2009 13:53:08 +0000 (15:53 +0200)]
ppc4xx: Fix TLB reset problem with recent 44x images
Patch
d873133f [ppc4xx: Add Sequoia RAM-booting target] broke "normal"
booting on some 44x platforms. This breakage is only noticed in some
cases while powercycling. As it seems, the code in question in start.S
didn't invalidate TLB #0. This makes sense since this TLB is used for
the bootrom mapping. With the patch mentioned above even TLB #0 got
invalidated resulting in an error later on.
This patch now fixes this issue by only invalidating TLB #0 in the RAM-
booting case.
Tested succesfully on Sequoia and Canyonlands.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Dirk Eibach <Eibach@gdsys.de>
Prafulla Wadaskar [Fri, 17 Jul 2009 14:26:30 +0000 (19:56 +0530)]
usb: bugfix driver/usb/host/ehci-hcd.c function ehci_submit_root
This change is cheked in Linux source and fix found to be in sync.
This patch is tested for USB host interface on Kirkwood based
Sheevaplug platform (ARM little endian board)
Risk: the impact of this patch is not validated on big endian board.
This need to be checked...
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Wolfgang Denk [Thu, 23 Jul 2009 20:23:23 +0000 (22:23 +0200)]
Coding Style cleanup; update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Mike Frysinger [Wed, 22 Jul 2009 02:59:36 +0000 (22:59 -0400)]
autoconf.mk: include before config.mk for top level files
By including autoconf.mk before config.mk, all top level files can use any
config options it sets up (like <arch>_config.mk) or the Makefile itself
without being forced to use lazy evaluation.
Mark Jackson [Tue, 21 Jul 2009 10:30:53 +0000 (11:30 +0100)]
Remove static declaration from gunzip_bmp()
This patch removes the static declaration from gunzip_bmp()
Without it, the gunzip_bmp() function is not visible to
common/lcd.c and fails to compile with an error.
Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
Peter Tyser [Tue, 21 Jul 2009 02:51:38 +0000 (21:51 -0500)]
cmd_tsi148: General cleanup
- Fix command help message
- Disable DEBUG by default
- Fix whitespace issues
- Fix lines > 80 characters
Signed-off-by: Peter Tyser <ptyser@gmail.com>
Acked-by: Stefan Roese <sr@denx.de>
Mike Frysinger [Sun, 19 Jul 2009 19:17:03 +0000 (15:17 -0400)]
unify HOST_CFLAGS and HOSTCFLAGS
The top build system sets up HOSTCFLAGS a bit and exports it, but other
places use HOST_CFLAGS instead. Unify the two as HOSTCFLAGS so that the
values stay in sync.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Wolfgang Denk [Thu, 23 Jul 2009 19:16:59 +0000 (21:16 +0200)]
Update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
projects / kernel / u-boot.git / log