ring-buffer: Ensure proper resetting of atomic variables in ring_buffer_reset_online_cpus

commit 7c339fb4d8577792378136c15fde773cfb863cb8 upstream.

In ring_buffer_reset_online_cpus, the buffer_size_kb write operation
may permanently fail if the cpu_online_mask changes between two
for_each_online_buffer_cpu loops. The number of increases and decreases
on both cpu_buffer->resize_disabled and cpu_buffer->record_disabled may be
inconsistent, causing some CPUs to have non-zero values for these atomic
variables after the function returns.

This issue can be reproduced by "echo 0 > trace" while hotplugging cpu.
After reproducing success, we can find out buffer_size_kb will not be
functional anymore.

To prevent leaving 'resize_disabled' and 'record_disabled' non-zero after
ring_buffer_reset_online_cpus returns, we ensure that each atomic variable
has been set up before atomic_sub() to it.

Link: https://lore.kernel.org/linux-trace-kernel/20230426062027.17451-1-Tze-nan.Wu@mediatek.com
Cc: stable@vger.kernel.org
Cc: <mhiramat@kernel.org>
Cc: npiggin@gmail.com
Fixes: b23d7a5f4a07 ("ring-buffer: speed up buffer resets by avoiding synchronize_rcu for each CPU")
Reviewed-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: qcom: lpass-lpi: set output value before enabling output

commit 163bfb0cb1f6fbf961cf912cbde57399ea1ae0e8 upstream.

As per Hardware Programming Guide, when configuring pin as output,
set the pin value before setting output-enable (OE).  Similar approach
is in main SoC TLMM pin controller.

Cc: <stable@vger.kernel.org>
Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230309154949.658380-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soundwire: qcom: correct setting ignore bit on v1.5.1

commit bd934f77eeac377e81ddac8673803e7334b82d3d upstream.

According to the comment and to downstream sources, the
SWRM_CONTINUE_EXEC_ON_CMD_IGNORE in SWRM_CMD_FIFO_CFG_ADDR register
should be set for v1.5.1 and newer, so fix the >= operator.

Fixes: 542d3491cdd7 ("soundwire: qcom: set continue execution flag for ignored commands")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230222140343.188691-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pwm: meson: Fix g12a ao clk81 name

commit 9e4fa80ab7ef9eb4f7b1ea9fc31e0eb040e85e25 upstream.

Fix the name of the aoclk81 clock. Apparently name aoclk81 as used by
the vendor driver was changed when mainlining the g12a clock driver.

Fixes: f41efceb46e6 ("pwm: meson: Add clock source configuration for Meson G12A")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pwm: meson: Fix axg ao mux parents

commit eb411c0cf59ae6344b34bc6f0d298a22b300627e upstream.

This fix is basically the same as 9bce02ef0dfa ("pwm: meson: Fix the
G12A AO clock parents order"). Vendor driver referenced there has
xtal as first parent also for axg ao. In addition fix the name
of the aoclk81 clock. Apparently name aoclk81 as used by the vendor
driver was changed when mainlining the axg clock driver.

Fixes: bccaa3f917c9 ("pwm: meson: Add clock source configuration for Meson-AXG")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: mt76: add missing locking to protect against concurrent rx/status calls

commit 5b8ccdfb943f6a03c676d2ea816dd38c149e920b upstream.

According to the documentation, ieee80211_rx_list must not run concurrently
with ieee80211_tx_status (or its variants).

Cc: stable@vger.kernel.org
Fixes: 88046b2c9f6d ("mt76: add support for reporting tx status with skb")
Reported-by: Brian Coverstone <brian@mainsequence.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kheaders: Use array declaration instead of char

commit b69edab47f1da8edd8e7bfdf8c70f51a2a5d89fb upstream.

Under CONFIG_FORTIFY_SOURCE, memcpy() will check the size of destination
and source buffers. Defining kernel_headers_data as "char" would trip
this check. Since these addresses are treated as byte arrays, define
them as arrays (as done everywhere else).

This was seen with:

  $ cat /sys/kernel/kheaders.tar.xz >> /dev/null

  detected buffer overflow in memcpy
  kernel BUG at lib/string_helpers.c:1027!
  ...
  RIP: 0010:fortify_panic+0xf/0x20
  [...]
  Call Trace:
   <TASK>
   ikheaders_read+0x45/0x50 [kheaders]
   kernfs_fop_read_iter+0x1a4/0x2f0
  ...

Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/20230302112130.6e402a98@kernel.org/
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 43d8ce9d65a5 ("Provide in-kernel headers to make extending kernel easier")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230302224946.never.243-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: addac: stx104: Fix race condition for stx104_write_raw()

commit 9740827468cea80c42db29e7171a50e99acf7328 upstream.

The priv->chan_out_states array and actual DAC value can become
mismatched if stx104_write_raw() is called concurrently. Prevent such a
race condition by utilizing a mutex.

Fixes: 97a445dad37a ("iio: Add IIO support for the DAC on the Apex Embedded Systems STX104")
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/c95c9a77fcef36b2a052282146950f23bbc1ebdc.1680790580.git.william.gray@linaro.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: addac: stx104: Fix race condition when converting analog-to-digital

commit 4f9b80aefb9e2f542a49d9ec087cf5919730e1dd upstream.

The ADC conversion procedure requires several device I/O operations
performed in a particular sequence. If stx104_read_raw() is called
concurrently, the ADC conversion procedure could be clobbered. Prevent
such a race condition by utilizing a mutex.

Fixes: 4075a283ae83 ("iio: stx104: Add IIO support for the ADC channels")
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/2ae5e40eed5006ca735e4c12181a9ff5ced65547.1680790580.git.william.gray@linaro.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi: fix SSIF not responding under certain cond.

commit 6d2555cde2918409b0331560e66f84a0ad4849c6 upstream.

The ipmi communication is not restored after a specific version of BMC is
upgraded on our server.
The ipmi driver does not respond after printing the following log:

    ipmi_ssif: Invalid response getting flags: 1c 1

I found that after entering this branch, ssif_info->ssif_state always
holds SSIF_GETTING_FLAGS and never return to IDLE.

As a result, the driver cannot be loaded, because the driver status is
checked during the unload process and must be IDLE in shutdown_ssif():

        while (ssif_info->ssif_state != SSIF_IDLE)
                schedule_timeout(1);

The process trigger this problem is:

1. One msg timeout and next msg start send, and call
ssif_set_need_watch().

2. ssif_set_need_watch()->watch_timeout()->start_flag_fetch() change
ssif_state to SSIF_GETTING_FLAGS.

3. In msg_done_handler() ssif_state == SSIF_GETTING_FLAGS, if an error
message is received, the second branch does not modify the ssif_state.

4. All retry action need IS_SSIF_IDLE() == True. Include retry action in
watch_timeout(), msg_done_handler(). Sending msg does not work either.
SSIF_IDLE is also checked in start_next_msg().

5. The only thing that can be triggered in the SSIF driver is
watch_timeout(), after destory_user(), this timer will stop too.

So, if enter this branch, the ssif_state will remain SSIF_GETTING_FLAGS
and can't send msg, no timer started, can't unload.

We did a comparative test before and after adding this patch, and the
result is effective.

Fixes: 259307074bfc ("ipmi: Add SMBus interface driver (SSIF)")

Cc: stable@vger.kernel.org
Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com>
Message-Id: <20230412074907.80046-1-zhangyuchen.lcr@bytedance.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi:ssif: Add send_retries increment

commit 6ce7995a43febe693d4894033c6e29314970646a upstream.

A recent change removed an increment of send_retries, re-add it.

Fixes: 95767ed78a18 ipmi:ssif: resend_msg() cannot fail
Reported-by: Pavel Machek <pavel@denx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: fw: Allow firmware to pass a empty env

commit ee1809ed7bc456a72dc8410b475b73021a3a68d5 upstream.

fw_getenv will use env entry to determine style of env,
however it is legal for firmware to just pass a empty list.

Check if first entry exist before running strchr to avoid
null pointer dereference.

Cc: stable@vger.kernel.org
Link: https://github.com/clbr/n64bootloader/issues/5
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: fix sysctls.c built

commit e3184de9d46c2eebdb776face2e2662c6733331d upstream.

'obj-$(CONFIG_SYSCTL) += sysctls.o' must be moved after "obj-y :=",
or it won't be built as it is overwrited.

Note that there is nothing that is going to break by linking
sysctl.o later, we were just being way to cautious and patches
have been updated to reflect these considerations and sent for
stable as well with the whole "base" stuff needing to be linked
prior to child sysctl tables that use that directory. All of
the kernel sysctl APIs always share the same directory, and races
against using it should end up re-using the same single created
directory.

And so something we can do eventually is do away with all the base stuff.
For now it's fine, it's not creating an issue. It is just a bit pedantic
and careful.

Fixes: ab171b952c6e ("fs: move namespace sysctls and declare fs base directory")
Cc: stable@vger.kernel.org # v5.17
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[mcgrof: enhanced commit log for stable criteria and clarify base stuff ]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem

commit 58d7668242647e661a20efe065519abd6454287e upstream.

For CONFIG_NO_HZ_FULL systems, the tick_do_timer_cpu cannot be offlined.
However, cpu_is_hotpluggable() still returns true for those CPUs. This causes
torture tests that do offlining to end up trying to offline this CPU causing
test failures. Such failure happens on all architectures.

Fix the repeated error messages thrown by this (even if the hotplug errors are
harmless) by asking the opinion of the nohz subsystem on whether the CPU can be
hotplugged.

[ Apply Frederic Weisbecker feedback on refactoring tick_nohz_cpu_down(). ]

For drivers/base/ portion:
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Zhouyi Zhou <zhouzhouyi@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: rcu <rcu@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: 2987557f52b9 ("driver-core/cpu: Expose hotpluggability to the rest of the kernel")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: max310x: fix IO data corruption in batched operations

commit 3f42b142ea1171967e40e10e4b0241c0d6d28d41 upstream.

After upgrading from 5.16 to 6.1, our board with a MAX14830 started
producing lots of garbage data over UART. Bisection pointed out commit
285e76fc049c as the culprit. That patch tried to replace hand-written
code which I added in 2b4bac48c1084 ("serial: max310x: Use batched reads
when reasonably safe") with the generic regmap infrastructure for
batched operations.

Unfortunately, the `regmap_raw_read` and `regmap_raw_write` which were
used are actually functions which perform IO over *multiple* registers.
That's not what is needed for accessing these Tx/Rx FIFOs; the
appropriate functions are the `_noinc_` versions, not the `_raw_` ones.

Fix this regression by using `regmap_noinc_read()` and
`regmap_noinc_write()` along with the necessary `regmap_config` setup;
with this patch in place, our board communicates happily again. Since
our board uses SPI for talking to this chip, the I2C part is completely
untested.

Fixes: 285e76fc049c ("serial: max310x: use regmap methods for SPI batch operations")
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Link: https://lore.kernel.org/r/79db8e82aadb0e174bc82b9996423c3503c8fb37.1680732084.git.jan.kundrat@cesnet.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: Fix serial8250_tx_empty() race with DMA Tx

commit 146a37e05d620cef4ad430e5d1c9c077fe6fa76f upstream.

There's a potential race before THRE/TEMT deasserts when DMA Tx is
starting up (or the next batch of continuous Tx is being submitted).
This can lead to misdetecting Tx empty condition.

It is entirely normal for THRE/TEMT to be set for some time after the
DMA Tx had been setup in serial8250_tx_dma(). As Tx side is definitely
not empty at that point, it seems incorrect for serial8250_tx_empty()
claim Tx is empty.

Fix the race by also checking in serial8250_tx_empty() whether there's
DMA Tx active.

Note: This fix only addresses in-kernel race mainly to make using
TCSADRAIN/FLUSH robust. Userspace can still cause other races but they
seem userspace concurrency control problems.

Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230317113318.31327-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: fix TIOCSRS485 locking

commit 9e4f2a8004213339e9d837d891a59cc80e082966 upstream.

The RS485 multipoint addressing support for some reason added a new
ADDRB termios cflag which is (only!) updated from one of the RS485
ioctls.

Make sure to take the termios rw semaphore for the right ioctl (i.e.
set, not get).

Fixes: ae50bb275283 ("serial: take termios_rwsem for ->rs485_config() & pass termios as param")
Cc: stable@vger.kernel.org # 6.0
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20230412124811.11217-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: fix debugfs register accesses while suspended

commit 735baf1b23458f71a8b15cb924af22c9ff9cd125 upstream.

Wire up the debugfs regset device pointer so that the controller is
resumed before accessing registers to avoid crashing or locking up if it
happens to be runtime suspended.

Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver")
Cc: stable@vger.kernel.org # 4.15: 30332eeefec8: debugfs: regset32: Add Runtime PM support
Cc: stable@vger.kernel.org # 4.15
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230405090342.7363-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Prevent writing chars during tcsetattr TCSADRAIN/FLUSH

commit 094fb49a2d0d6827c86d2e0840873e6db0c491d2 upstream.

If userspace races tcsetattr() with a write, the drained condition
might not be guaranteed by the kernel. There is a race window after
checking Tx is empty before tty_set_termios() takes termios_rwsem for
write. During that race window, more characters can be queued by a
racing writer.

Any ongoing transmission might produce garbage during HW's
->set_termios() call. The intent of TCSADRAIN/FLUSH seems to be
preventing such a character corruption. If those flags are set, take
tty's write lock to stop any writer before performing the lower layer
Tx empty check and wait for the pending characters to be sent (if any).

The initial wait for all-writers-done must be placed outside of tty's
write lock to avoid deadlock which makes it impossible to use
tty_wait_until_sent(). The write lock is retried if a racing write is
detected.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230317113318.31327-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: resolver: ads1210: fix config mode

commit 16313403d873ff17a587818b61f84c8cb4971cef upstream.

As stated in the device datasheet [1], bits a0 and a1 have to be set to
1 for the configuration mode.

[1]: https://www.analog.com/media/en/technical-documentation/data-sheets/ad2s1210.pdf

Fixes: b19e9ad5e2cb9 ("staging:iio:resolver:ad2s1210 general driver cleanup")
Cc: stable <stable@kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230327145414.1505537-1-nuno.sa@analog.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-crypto: make blk_crypto_evict_key() more robust

commit 5c7cb94452901a93e90c2230632e2c12a681bc92 upstream.

If blk_crypto_evict_key() sees that the key is still in-use (due to a
bug) or that ->keyslot_evict failed, it currently just returns while
leaving the key linked into the keyslot management structures.

However, blk_crypto_evict_key() is only called in contexts such as inode
eviction where failure is not an option.  So actually the caller
proceeds with freeing the blk_crypto_key regardless of the return value
of blk_crypto_evict_key().

These two assumptions don't match, and the result is that there can be a
use-after-free in blk_crypto_reprogram_all_keys() after one of these
errors occurs.  (Note, these errors *shouldn't* happen; we're just
talking about what happens if they do anyway.)

Fix this by making blk_crypto_evict_key() unlink the key from the
keyslot management structures even on failure.

Also improve some comments.

Fixes: 1b2628397058 ("block: Keyslot Manager for Inline Encryption")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-crypto: make blk_crypto_evict_key() return void

commit 70493a63ba04f754f7a7dd53a4fcc82700181490 upstream.

blk_crypto_evict_key() is only called in contexts such as inode eviction
where failure is not an option.  So there is nothing the caller can do
with errors except log them.  (dm-table.c does "use" the error code, but
only to pass on to upper layers, so it doesn't really count.)

Just make blk_crypto_evict_key() return void and log errors itself.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-mq: release crypto keyslot before reporting I/O complete

commit 9cd1e566676bbcb8a126acd921e4e194e6339603 upstream.

Once all I/O using a blk_crypto_key has completed, filesystems can call
blk_crypto_evict_key().  However, the block layer currently doesn't call
blk_crypto_put_keyslot() until the request is being freed, which happens
after upper layers have been told (via bio_endio()) the I/O has
completed.  This causes a race condition where blk_crypto_evict_key()
can see 'slot_refs != 0' without there being an actual bug.

This makes __blk_crypto_evict_key() hit the
'WARN_ON_ONCE(atomic_read(&slot->slot_refs) != 0)' and return without
doing anything, eventually causing a use-after-free in
blk_crypto_reprogram_all_keys().  (This is a very rare bug and has only
been seen when per-file keys are being used with fscrypt.)

There are two options to fix this: either release the keyslot before
bio_endio() is called on the request's last bio, or make
__blk_crypto_evict_key() ignore slot_refs.  Let's go with the first
solution, since it preserves the ability to report bugs (via
WARN_ON_ONCE) where a key is evicted while still in-use.

Fixes: a892c8d52c02 ("block: Inline encryption support for blk-mq")
Cc: stable@vger.kernel.org
Reviewed-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-crypto: Add a missing include directive

commit 85168d416e5d3184b77dbec8fee75c9439894afa upstream.

Allow the compiler to verify consistency of function declarations and
function definitions. This patch fixes the following sparse errors:

block/blk-crypto-profile.c:241:14: error: no previous prototype for ‘blk_crypto_get_keyslot’ [-Werror=missing-prototypes]
  241 | blk_status_t blk_crypto_get_keyslot(struct blk_crypto_profile *profile,
      |              ^~~~~~~~~~~~~~~~~~~~~~
block/blk-crypto-profile.c:318:6: error: no previous prototype for ‘blk_crypto_put_keyslot’ [-Werror=missing-prototypes]
  318 | void blk_crypto_put_keyslot(struct blk_crypto_keyslot *slot)
      |      ^~~~~~~~~~~~~~~~~~~~~~
block/blk-crypto-profile.c:344:6: error: no previous prototype for ‘__blk_crypto_cfg_supported’ [-Werror=missing-prototypes]
  344 | bool __blk_crypto_cfg_supported(struct blk_crypto_profile *profile,
      |      ^~~~~~~~~~~~~~~~~~~~~~~~~~
block/blk-crypto-profile.c:373:5: error: no previous prototype for ‘__blk_crypto_evict_key’ [-Werror=missing-prototypes]
  373 | int __blk_crypto_evict_key(struct blk_crypto_profile *profile,
      |     ^~~~~~~~~~~~~~~~~~~~~~

Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221123172923.434339-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-crypto: move internal only declarations to blk-crypto-internal.h

commit 3569788c08235c6f3e9e6ca724b2df44787ff487 upstream.

 blk_crypto_get_keyslot, blk_crypto_put_keyslot, __blk_crypto_evict_key
and __blk_crypto_cfg_supported are only used internally by the
blk-crypto code, so move the out of blk-crypto-profile.h, which is
included by drivers that supply blk-crypto functionality.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-crypto: add a blk_crypto_config_supported_natively helper

commit 6715c98b6cf003f26b1b2f655393134e9d999a05 upstream.

Add a blk_crypto_config_supported_natively helper that wraps
__blk_crypto_cfg_supported to retrieve the crypto_profile from the
request queue.  With this fscrypt can stop including
blk-crypto-profile.h and rely on the public consumer interface in
blk-crypto.h.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-crypto: don't use struct request_queue for public interfaces

commit fce3caea0f241f5d34855c82c399d5e0e2d91f07 upstream.

Switch all public blk-crypto interfaces to use struct block_device
arguments to specify the device they operate on instead of th
request_queue, which is a block layer implementation detail.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-stat: fix QUEUE_FLAG_STATS clear

commit 20de765f6d9da0c47b756429c60b41063b990a10 upstream.

We need to set QUEUE_FLAG_STATS for two cases:
1. blk_stat_enable_accounting()
2. blk_stat_add_callback()

So we should clear it only when ((q->stats->accounting == 0) &&
list_empty(&q->stats->callbacks)).

blk_stat_disable_accounting() only check if q->stats->accounting
is 0 before clear the flag, this patch fix it.

Also add list_empty(&q->stats->callbacks)) check when enable, or
the flag is already set.

The bug can be reproduced on kernel without BLK_DEV_THROTTLING
(since it unconditionally enable accounting, see the next patch).

  # cat /sys/block/sr0/queue/scheduler
  none mq-deadline [bfq]

  # cat /sys/kernel/debug/block/sr0/state
  SAME_COMP|IO_STAT|INIT_DONE|STATS|REGISTERED|NOWAIT|30

  # echo none > /sys/block/sr0/queue/scheduler

  # cat /sys/kernel/debug/block/sr0/state
  SAME_COMP|IO_STAT|INIT_DONE|REGISTERED|NOWAIT

  # cat /sys/block/sr0/queue/wbt_lat_usec
  75000

We can see that after changing elevator from "bfq" to "none",
"STATS" flag is lost even though WBT callback still need it.

Fixes: 68497092bde9 ("block: make queue stat accounting a reference")
Cc: <stable@vger.kernel.org> # v5.17+
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230413062805.2081970-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ov8856: Do not check for for module version

commit 5a4e1b5aed2a36a10d6a3b30fafb6b3bf41c3186 upstream.

It the device is probed in non-zero ACPI D state, the module
identification is delayed until the first streamon.

The module identification has two parts: deviceID and version. To rea
the version we have to enable OTP read. This cannot be done during
streamon, becase it modifies REG_MODE_SELECT.

Since the driver has the same behaviour for all the module versions, do
not read the module version from the sensor's OTP.

Cc: stable@vger.kernel.org
Fixes: 0e014f1a8d54 ("media: ov8856: support device probe in non-zero ACPI D state")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

posix-cpu-timers: Implement the missing timer_wait_running callback

commit f7abf14f0001a5a47539d9f60bbdca649e43536b upstream.

For some unknown reason the introduction of the timer_wait_running callback
missed to fixup posix CPU timers, which went unnoticed for almost four years.
Marco reported recently that the WARN_ON() in timer_wait_running()
triggers with a posix CPU timer test case.

Posix CPU timers have two execution models for expiring timers depending on
CONFIG_POSIX_CPU_TIMERS_TASK_WORK:

1) If not enabled, the expiry happens in hard interrupt context so
   spin waiting on the remote CPU is reasonably time bound.

   Implement an empty stub function for that case.

2) If enabled, the expiry happens in task work before returning to user
   space or guest mode. The expired timers are marked as firing and moved
   from the timer queue to a local list head with sighand lock held. Once
   the timers are moved, sighand lock is dropped and the expiry happens in
   fully preemptible context. That means the expiring task can be scheduled
   out, migrated, interrupted etc. So spin waiting on it is more than
   suboptimal.

   The timer wheel has a timer_wait_running() mechanism for RT, which uses
   a per CPU timer-base expiry lock which is held by the expiry code and the
   task waiting for the timer function to complete blocks on that lock.

   This does not work in the same way for posix CPU timers as there is no
   timer base and expiry for process wide timers can run on any task
   belonging to that process, but the concept of waiting on an expiry lock
   can be used too in a slightly different way:

    - Add a mutex to struct posix_cputimers_work. This struct is per task
      and used to schedule the expiry task work from the timer interrupt.

    - Add a task_struct pointer to struct cpu_timer which is used to store
      a the task which runs the expiry. That's filled in when the task
      moves the expired timers to the local expiry list. That's not
      affecting the size of the k_itimer union as there are bigger union
      members already

    - Let the task take the expiry mutex around the expiry function

    - Let the waiter acquire a task reference with rcu_read_lock() held and
      block on the expiry mutex

   This avoids spin-waiting on a task which might not even be on a CPU and
   works nicely for RT too.

Fixes: ec8f954a40da ("posix-timers: Use a callback for cancel synchronization on PREEMPT_RT")
Reported-by: Marco Elver <elver@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marco Elver <elver@google.com>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87zg764ojw.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: Add !tpm_amd_is_rng_defective() to the hwrng_unregister() call site

commit bd8621ca1510e6e802df9855bdc35a04a3cfa932 upstream.

The following crash was reported:

[ 1950.279393] list_del corruption, ffff99560d485790->next is NULL
[ 1950.279400] ------------[ cut here ]------------
[ 1950.279401] kernel BUG at lib/list_debug.c:49!
[ 1950.279405] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 1950.279407] CPU: 11 PID: 5886 Comm: modprobe Tainted: G O 6.2.8_1 #1
[ 1950.279409] Hardware name: Gigabyte Technology Co., Ltd. B550M AORUS PRO-P/B550M AORUS PRO-P,
BIOS F15c 05/11/2022
[ 1950.279410] RIP: 0010:__list_del_entry_valid+0x59/0xc0
[ 1950.279415] Code: 48 8b 01 48 39 f8 75 5a 48 8b 72 08 48 39 c6 75 65 b8 01 00 00 00 c3 cc cc cc
cc 48 89 fe 48 c7 c7 08 a8 13 9e e8 b7 0a bc ff <0f> 0b 48 89 fe 48 c7 c7 38 a8 13 9e e8 a6 0a bc
ff 0f 0b 48 89 fe
[ 1950.279416] RSP: 0018:ffffa96d05647e08 EFLAGS: 00010246
[ 1950.279418] RAX: 0000000000000033 RBX: ffff99560d485750 RCX: 0000000000000000
[ 1950.279419] RDX: 0000000000000000 RSI: ffffffff9e107c59 RDI: 00000000ffffffff
[ 1950.279420] RBP: ffffffffc19c5168 R08: 0000000000000000 R09: ffffa96d05647cc8
[ 1950.279421] R10: 0000000000000003 R11: ffffffff9ea2a568 R12: 0000000000000000
[ 1950.279422] R13: ffff99560140a2e0 R14: ffff99560127d2e0 R15: 0000000000000000
[ 1950.279422] FS: 00007f67da795380(0000) GS:ffff995d1f0c0000(0000) knlGS:0000000000000000
[ 1950.279424] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1950.279424] CR2: 00007f67da7e65c0 CR3: 00000001feed2000 CR4: 0000000000750ee0
[ 1950.279426] PKRU: 55555554
[ 1950.279426] Call Trace:
[ 1950.279428] <TASK>
[ 1950.279430] hwrng_unregister+0x28/0xe0 [rng_core]
[ 1950.279436] tpm_chip_unregister+0xd5/0xf0 [tpm]

Add the forgotten !tpm_amd_is_rng_defective() invariant to the
hwrng_unregister() call site inside tpm_chip_unregister().

Cc: stable@vger.kernel.org
Reported-by: Martin Dimov <martin@dmarto.com>
Link: https://lore.kernel.org/linux-integrity/3d1d7e9dbfb8c96125bc93b6b58b90a7@dmarto.com/
Fixes: f1324bbc4011 ("tpm: disable hwrng for fTPM on some AMD designs")
Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources")
Tested-by: Martin Dimov <martin@dmarto.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (adt7475) Use device_property APIs when configuring polarity

commit 2a8e41ad337508fc5d598c0f9288890214f8e318 upstream.

On DT unaware platforms of_property_read_u32_array() returns -ENOSYS
which wasn't handled by the code treating adi,pwm-active-state as
optional. Update the code to use device_property_read_u32_array() which
deals gracefully with DT unaware platforms.

Fixes: 86da28eed4fb ("hwmon: (adt7475) Add support for inverting pwm output")
Reported-by: Mariusz Białończyk <manio@skyboo.net>
Link: https://lore.kernel.org/linux-hwmon/52e26a67-9131-2dc0-40cb-db5c07370027@alliedtelesis.co.nz/T/#mdd0505801e0a4e72340de009a47c0fca4f771ed3
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20230418233656.869055-2-chris.packham@alliedtelesis.co.nz
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (k10temp) Check range scale when CUR_TEMP register is read-write

commit 0c072385348e3ac5229145644055d3e2afb5b3db upstream.

Spec says, when CUR_TEMP_TJ_SEL == 3 and CUR_TEMP_RANGE_SEL == 0,
it should use RangeUnadjusted is 0, which is (CurTmp*0.125 -49) C. The
CUR_TEMP register is read-write when CUR_TEMP_TJ_SEL == 3 (bit 17-16).

Add the check to detect it.

Sensors command's output before the patch.
$sensors
 k10temp-pci-00c3
 Adapter: PCI adapter
 Tctl:         +76.6°C <- Wrong value
 Tccd1:        +26.5°C
 Tccd2:        +27.5°C
 Tccd3:        +27.2°C
 Tccd4:        +27.5°C
 Tccd5:        +26.0°C
 Tccd6:        +26.2°C
 Tccd7:        +25.0°C
 Tccd8:        +26.5°C

Sensors command's output after the patch.
$sensors
 k10temp-pci-00c3
 Adapter: PCI adapter
 Tctl:         +28.8°C <- corrected value
 Tccd1:        +27.5°C
 Tccd2:        +28.5°C
 Tccd3:        +28.5°C
 Tccd4:        +28.5°C
 Tccd5:        +27.0°C
 Tccd6:        +27.5°C
 Tccd7:        +27.0°C
 Tccd8:        +27.5°C

Signed-off-by: Babu Moger <babu.moger@amd.com>
Fixes: 1b59788979ac ("hwmon: (k10temp) Add temperature offset for Ryzen 2700X")
Link: https://lore.kernel.org/r/20230413213958.847634-1-babu.moger@amd.com
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: dwc3: fix runtime pm imbalance on unbind

commit 44d257e9012ee8040e41d224d0e5bfb5ef5427ea upstream.

Make sure to balance the runtime PM usage count on driver unbind by
adding back the pm_runtime_allow() call that had been erroneously
removed.

Fixes: 266d0493900a ("usb: dwc3: core: don't trigger runtime pm when remove driver")
Cc: stable@vger.kernel.org # 5.9
Cc: Li Jun <jun.li@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230404072524.19014-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: dwc3: fix runtime pm imbalance on probe errors

commit 9a8ad10c9f2e0925ff26308ec6756b93fc2f4977 upstream.

Make sure not to suspend the device when probe fails to avoid disabling
clocks and phys multiple times.

Fixes: 328082376aea ("usb: dwc3: fix runtime PM in error path")
Cc: stable@vger.kernel.org # 4.8
Cc: Roger Quadros <rogerq@ti.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230404072524.19014-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive

commit 02435a739b81ae24aff5d6e930efef9458e2af3c upstream.

It was observed that there are hosts that may complete pending SETUP
transactions before the stop active transfers and controller halt occurs,
leading to lingering endxfer commands on DEPs on subsequent pullup/gadget
start iterations.

  dwc3_gadget_ep_disable   name=ep8in flags=0x3009  direction=1
  dwc3_gadget_ep_disable   name=ep4in flags=1  direction=1
  dwc3_gadget_ep_disable   name=ep3out flags=1  direction=0
  usb_gadget_disconnect   deactivated=0  connected=0  ret=0

The sequence shows that the USB gadget disconnect (dwc3_gadget_pullup(0))
routine completed successfully, allowing for the USB gadget to proceed with
a USB gadget connect.  However, if this occurs the system runs into an
issue where:

  BUG: spinlock already unlocked on CPU
  spin_bug+0x0
  dwc3_remove_requests+0x278
  dwc3_ep0_out_start+0xb0
  __dwc3_gadget_start+0x25c

This is due to the pending endxfers, leading to gadget start (w/o lock
held) to execute the remove requests, which will unlock the dwc3
spinlock as part of giveback.

To mitigate this, resolve the pending endxfers on the pullup disable
path by re-locating the SETUP phase check after stop active transfers, since
that is where the DWC3_EP_DELAY_STOP is potentially set.  This also allows
for handling of a host that may be unresponsive by using the completion
timeout to trigger the stall and restart for EP0.

Fixes: c96683798e27 ("usb: dwc3: ep0: Don't prepare beyond Setup stage")
Cc: stable@vger.kernel.org
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20230413195742.11821-2-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: udc: core: Prevent redundant calls to pullup

commit a3afbf5cc887fc3401f012fe629810998ed61859 upstream.

usb_gadget_connect calls gadget->ops->pullup without checking whether
gadget->connected was previously set. Make this symmetric to
usb_gadget_disconnect by returning early if gadget->connected is
already set.

Fixes: 5a1da544e572 ("usb: gadget: core: do not try to disconnect gadget if it is not connected")
Cc: stable@vger.kernel.org
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20230407030741.3163220-2-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: udc: core: Invoke usb_gadget_connect only when started

commit 0db213ea8eed5534a5169e807f28103cbc9d23df upstream.

usb_udc_connect_control does not check to see if the udc has already
been started. This causes gadget->ops->pullup to be called through
usb_gadget_connect when invoked from usb_udc_vbus_handler even before
usb_gadget_udc_start is called. Guard this by checking for udc->started
in usb_udc_connect_control before invoking usb_gadget_connect.

Guarding udc->vbus, udc->started, gadget->connect, gadget->deactivate
related functions with connect_lock. usb_gadget_connect_locked,
usb_gadget_disconnect_locked, usb_udc_connect_control_locked,
usb_gadget_udc_start_locked, usb_gadget_udc_stop_locked are called with
this lock held as they can be simulataneously invoked from different code
paths.

Adding an additional check to make sure udc is started(udc->started)
before pullup callback is invoked.

Fixes: 628ef0d273a6 ("usb: udc: add usb_udc_vbus_handler")
Cc: stable@vger.kernel.org
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20230407030741.3163220-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IMA: allow/fix UML builds

commit 644f17412f5acf01a19af9d04a921937a2bc86c6 upstream.

UML supports HAS_IOMEM since 0bbadafdc49d (um: allow disabling
NO_IOMEM).

Current IMA build on UML fails on allmodconfig (with TCG_TPM=m):

ld: security/integrity/ima/ima_queue.o: in function `ima_add_template_entry':
ima_queue.c:(.text+0x2d9): undefined reference to `tpm_pcr_extend'
ld: security/integrity/ima/ima_init.o: in function `ima_init':
ima_init.c:(.init.text+0x43f): undefined reference to `tpm_default_chip'
ld: security/integrity/ima/ima_crypto.o: in function `ima_calc_boot_aggregate_tfm':
ima_crypto.c:(.text+0x1044): undefined reference to `tpm_pcr_read'
ld: ima_crypto.c:(.text+0x10d8): undefined reference to `tpm_pcr_read'

Modify the IMA Kconfig entry so that it selects TCG_TPM if HAS_IOMEM
is set, regardless of the UML Kconfig setting.
This updates TCG_TPM from =m to =y and fixes the linker errors.

Fixes: f4a0391dfa91 ("ima: fix Kconfig dependencies")
Cc: Stable <stable@vger.kernel.org> # v5.14+
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-um@lists.infradead.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: qcom-qmp-pcie: sc8180x PCIe PHY has 2 lanes

commit 1db6b0a4246ce708b89f5136571130b9987741d1 upstream.

All PCIe PHYs on sc8180x platform have 2 lanes, so change the number of
lanes to 2.

Fixes: f839f14e24f2 ("phy: qcom-qmp: Add sc8180x PCIe support")
Cc: stable@vger.kernel.org # 5.15
Sgned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230331151250.4049-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: qcom: Fix the incorrect register usage in v2.7.0 config

commit 2542e16c392508800f1d9037feee881a9c444951 upstream.

Qcom PCIe IP version v2.7.0 and its derivatives don't contain the
PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT register. Instead, they have the new
PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 register. So fix the incorrect
register usage which is modifying a different register.

Also in this IP version, this register change doesn't depend on MSI
being enabled. So remove that check also.

Link: https://lore.kernel.org/r/20230316081117.14288-2-manivannan.sadhasivam@linaro.org
Fixes: ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: <stable@vger.kernel.org> # 5.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: pciehp: Fix AB-BA deadlock between reset_lock and device_lock

commit f5eff5591b8f9c5effd25c92c758a127765f74c1 upstream.

In 2013, commits

  2e35afaefe64 ("PCI: pciehp: Add reset_slot() method")
  608c388122c7 ("PCI: Add slot reset option to pci_dev_reset()")

amended PCIe hotplug to mask Presence Detect Changed events during a
Secondary Bus Reset.  The reset thus no longer causes gratuitous slot
bringdown and bringup.

However the commits neglected to serialize reset with code paths reading
slot registers.  For instance, a slot bringup due to an earlier hotplug
event may see the Presence Detect State bit cleared during a concurrent
Secondary Bus Reset.

In 2018, commit

  5b3f7b7d062b ("PCI: pciehp: Avoid slot access during reset")

retrofitted the missing locking.  It introduced a reset_lock which
serializes a Secondary Bus Reset with other parts of pciehp.

Unfortunately the locking turns out to be overzealous:  reset_lock is
held for the entire enumeration and de-enumeration of hotplugged devices,
including driver binding and unbinding.

Driver binding and unbinding acquires device_lock while the reset_lock
of the ancestral hotplug port is held.  A concurrent Secondary Bus Reset
acquires the ancestral reset_lock while already holding the device_lock.
The asymmetric locking order in the two code paths can lead to AB-BA
deadlocks.

Michael Haeuptle reports such deadlocks on simultaneous hot-removal and
vfio release (the latter implies a Secondary Bus Reset):

  pciehp_ist()                                    # down_read(reset_lock)
    pciehp_handle_presence_or_link_change()
      pciehp_disable_slot()
        __pciehp_disable_slot()
          remove_board()
            pciehp_unconfigure_device()
              pci_stop_and_remove_bus_device()
                pci_stop_bus_device()
                  pci_stop_dev()
                    device_release_driver()
                      device_release_driver_internal()
                        __device_driver_lock()    # device_lock()

  SYS_munmap()
    vfio_device_fops_release()
      vfio_device_group_close()
        vfio_device_close()
          vfio_device_last_close()
            vfio_pci_core_close_device()
              vfio_pci_core_disable()             # device_lock()
                __pci_reset_function_locked()
                  pci_reset_bus_function()
                    pci_dev_reset_slot_function()
                      pci_reset_hotplug_slot()
                        pciehp_reset_slot()       # down_write(reset_lock)

Ian May reports the same deadlock on simultaneous hot-removal and an
AER-induced Secondary Bus Reset:

  aer_recover_work_func()
    pcie_do_recovery()
      aer_root_reset()
        pci_bus_error_reset()
          pci_slot_reset()
            pci_slot_lock()                       # device_lock()
            pci_reset_hotplug_slot()
              pciehp_reset_slot()                 # down_write(reset_lock)

Fix by releasing the reset_lock during driver binding and unbinding,
thereby splitting and shrinking the critical section.

Driver binding and unbinding is protected by the device_lock() and thus
serialized with a Secondary Bus Reset.  There's no need to additionally
protect it with the reset_lock.  However, pciehp does not bind and
unbind devices directly, but rather invokes PCI core functions which
also perform certain enumeration and de-enumeration steps.

The reset_lock's purpose is to protect slot registers, not enumeration
and de-enumeration of hotplugged devices.  That would arguably be the
job of the PCI core, not the PCIe hotplug driver.  After all, an
AER-induced Secondary Bus Reset may as well happen during boot-time
enumeration of the PCI hierarchy and there's no locking to prevent that
either.

Exempting *de-enumeration* from the reset_lock is relatively harmless:
A concurrent Secondary Bus Reset may foil config space accesses such as
PME interrupt disablement.  But if the device is physically gone, those
accesses are pointless anyway.  If the device is physically present and
only logically removed through an Attention Button press or the sysfs
"power" attribute, PME interrupts as well as DMA cannot come through
because pciehp_unconfigure_device() disables INTx and Bus Master bits.
That's still protected by the reset_lock in the present commit.

Exempting *enumeration* from the reset_lock also has limited impact:
The exempted call to pci_bus_add_device() may perform device accesses
through pcibios_bus_add_device() and pci_fixup_device() which are now
no longer protected from a concurrent Secondary Bus Reset.  Otherwise
there should be no impact.

In essence, the present commit seeks to fix the AB-BA deadlocks while
still retaining a best-effort reset protection for enumeration and
de-enumeration of hotplugged devices -- until a general solution is
implemented in the PCI core.

Link: https://lore.kernel.org/linux-pci/CS1PR8401MB0728FC6FDAB8A35C22BD90EC95F10@CS1PR8401MB0728.NAMPRD84.PROD.OUTLOOK.COM
Link: https://lore.kernel.org/linux-pci/20200615143250.438252-1-ian.may@canonical.com
Link: https://lore.kernel.org/linux-pci/ce878dab-c0c4-5bd0-a725-9805a075682d@amd.com
Link: https://lore.kernel.org/linux-pci/ed831249-384a-6d35-0831-70af191e9bce@huawei.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215590
Fixes: 5b3f7b7d062b ("PCI: pciehp: Avoid slot access during reset")
Link: https://lore.kernel.org/r/fef2b2e9edf245c049a8c5b94743c0f74ff5008a.1681191902.git.lukas@wunner.de
Reported-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reported-by: Ian May <ian.may@canonical.com>
Reported-by: Andrey Grodzovsky <andrey2805@gmail.com>
Reported-by: Rahul Kumar <rahul.kumar1@amd.com>
Reported-by: Jialin Zhang <zhangjialin11@huawei.com>
Tested-by: Anatoli Antonovitch <Anatoli.Antonovitch@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.19+
Cc: Dan Stein <dstein@hpe.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Alex Michon <amichon@kalrayinc.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: kirin: Select REGMAP_MMIO

commit 3a2776e8a0e156a61f5b59ae341d8fffc730b962 upstream.

pcie-kirin uses regmaps, and needs to pull them in; otherwise, with
CONFIG_PCIE_KIRIN=y and without CONFIG_REGMAP_MMIO pcie-kirin produces
a linker failure looking for __devm_regmap_init_mmio_clk().

Fixes: d19afe7be126 ("PCI: kirin: Use regmap for APB registers")
Link: https://lore.kernel.org/r/04636141da1d6d592174eefb56760511468d035d.1668410580.git.josh@joshtriplett.org
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
[lpieralisi@kernel.org: commit log and removed REGMAP select]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org # 5.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/boot: Fix boot wrapper code generation with CONFIG_POWER10_CPU

commit 648a1783fe2551f5a091c9a5f8f463cb2cbf8745 upstream.

-mcpu=power10 will generate prefixed and pcrel code by default, which
we do not support. The general kernel disables these with cflags, but
those were missed for the boot wrapper.

Fixes: 4b2a9315f20d ("powerpc/64s: POWER10 CPU Kconfig build option")
Cc: stable@vger.kernel.org # v6.1+
Reported-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230407040909.230998-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Stash shadow stack pointer in the task struct on interrupt

commit 59b37fe52f49955791a460752c37145f1afdcad1 upstream.

Instead of reloading the shadow call stack pointer from the ordinary
stack, which may be vulnerable to the kind of gadget based attacks
shadow call stacks were designed to prevent, let's store a task's shadow
call stack pointer in the task struct when switching to the shadow IRQ
stack.

Given that currently, the task_struct::scs_sp field is only used to
preserve the shadow call stack pointer while a task is scheduled out or
running in user space, reusing this field to preserve and restore it
while running off the IRQ stack must be safe, as those occurrences are
guaranteed to never overlap. (The stack switching logic only switches
stacks when running from the task stack, and so the value being saved
here always corresponds to the task mode shadow stack)

While at it, fold a mov/add/mov sequence into a single add.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230109174800.3286265-3-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Always load shadow stack pointer directly from the task struct

commit 2198d07c509f1db4a1185d1f65aaada794c6ea59 upstream.

All occurrences of the scs_load macro load the value of the shadow call
stack pointer from the task which is current at that point. So instead
of taking a task struct register argument in the scs_load macro to
specify the task struct to load from, let's always reference the current
task directly. This should make it much harder to exploit any
instruction sequences reloading the shadow call stack pointer register
from memory.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230109174800.3286265-2-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: amd: ps: update the acp clock source.

commit a4d432e9132c0b29d857b09ca2ec4c1f455b5948 upstream.

Updating the clock source from ACLK to default clock

Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20230331052102.2211115-1-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: amd: fix ACP version typo mistake

commit 4b19211435950a78af032c26ad64a5268e6012be upstream.

Pink Sardine is based on ACP6.3 architecture.
This patch fixes the typo mistake acp6.2 -> acp6.3

Signed-off-by: syed saba kareem <syed.sabakareem@amd.com>
Link: https://lore.kernel.org/r/20221104121001.207992-1-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: mt76: mt7921e: Set memory space enable in PCI_COMMAND if unset

commit 09d4d6da1b65d09414e7bce61459593f3c80ead1 upstream.

When the BIOS has been configured for Fast Boot, systems with mt7921e
have non-functional wifi.  Turning on Fast boot caused both bus master
enable and memory space enable bits in PCI_COMMAND not to get configured.

The mt7921 driver already sets bus master enable, but explicitly check
and set memory access enable as well to fix this problem.

Tested-by: Anson Tsao <anson.tsao@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wireguard: timers: cast enum limits members to int in prints

commit 2d4ee16d969c97996e80e4c9cb6de0acaff22c9f upstream.

Since gcc13, each member of an enum has the same type as the enum. And
that is inherited from its members. Provided "REKEY_AFTER_MESSAGES =
1ULL << 60", the named type is unsigned long.

This generates warnings with gcc-13:
  error: format '%d' expects argument of type 'int', but argument 6 has type 'long unsigned int'

Cast those particular enum members to int when printing them.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=36113
Cc: Martin Liska <mliska@suse.cz>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/all/20221213225208.3343692-2-Jason@zx2c4.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cc: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpu: Add model number for Intel Arrow Lake processor

[ Upstream commit 81515ecf155a38f3532bf5ddef88d651898df6be ]

Successor to Lunar Lake.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230404174641.426593-1-tony.luck@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

asm-generic/io.h: suppress endianness warnings for readq() and writeq()

[ Upstream commit d564fa1ff19e893e2971d66e5c8f49dc1cdc8ffc ]

Commit c1d55d50139b ("asm-generic/io.h: Fix sparse warnings on
big-endian architectures") missed fixing the 64-bit accessors.

Arnd explains in the attached link why the casts are necessary, even if
__raw_readq() and __raw_writeq() do not take endian-specific types.

Link: https://lore.kernel.org/lkml/9105d6fc-880b-4734-857d-e3d30b87ccf6@app.fastmail.com/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Error if a trace event has an array for a __field()

[ Upstream commit f82e7ca019dfad3b006fd3b772f7ac569672db55 ]

A __field() in the TRACE_EVENT() macro is used to set up the fields of the
trace event data. It is for single storage units (word, char, int,
pointer, etc) and not for complex structures or arrays. Unfortunately,
there's nothing preventing the build from accepting:

    __field(int, arr[5]);

from building. It will turn into a array value. This use to work fine, as
the offset and size use to be determined by the macro using the field name,
but things have changed and the offset and size are now determined by the
type. So the above would only be size 4, and the next field will be
located 4 bytes from it (instead of 20).

The proper way to declare static arrays is to use the __array() macro.

Instead of __field(int, arr[5]) it should be __array(int, arr, 5).

Add some macro tricks to the building of a trace event from the
TRACE_EVENT() macro such that __field(int, arr[5]) will fail to build. A
comment by the failure will explain why the build failed.

Link: https://lore.kernel.org/lkml/20230306122549.236561-1-douglas.raillard@arm.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230309221302.642e82d9@gandalf.local.home
Reported-by: Douglas RAILLARD <douglas.raillard@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath11k: reduce the MHI timeout to 20s

[ Upstream commit cf5fa3ca0552f1b7ba8490de40700bbfb6979b17 ]

Currently ath11k breaks after hibernation, the reason being that ath11k expects
that the wireless device will have power during suspend and the firmware will
continue running. But of course during hibernation the power from the device is
cut off and firmware is not running when resuming, so ath11k will fail.

(The reason why ath11k needs the firmware running is the interaction between
mac80211 and MHI stack, it's a long story and more info in the bugzilla report.)

In SUSE kernels the watchdog timeout is reduced from the default 120 to 60 seconds:

CONFIG_DPM_WATCHDOG_TIMEOUT=60

But as the ath11k MHI timeout is 90 seconds the kernel will crash before will
ath11k will recover in resume callback. To avoid the crash reduce the MHI
timeout to just 20 seconds.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9

Link: https://bugzilla.kernel.org/show_bug.cgi?id=214649
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230329162038.8637-1-kvalo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: thinkpad_acpi: Add missing T14s Gen1 type to s2idle quirk list

[ Upstream commit 9a469c6dfab38326f99f105386db84230be09ee3 ]

From the commit message adding the first s2idle quirks:

> Lenovo laptops that contain NVME SSDs across a variety of generations have
> trouble resuming from suspend to idle when the IOMMU translation layer is
> active for the NVME storage device.
>
> This generally manifests as a large resume delay or page faults. These
> delays and page faults occur as a result of a Lenovo BIOS specific SMI
> that runs during the D3->D0 transition on NVME devices.

Add the DMI ids for another variant of the T14s Gen1, which also needs
the s2idle quirk.

Link: https://lore.kernel.org/all/20220503183420.348-1-mario.limonciello@amd.com/
Link: https://bbs.archlinux.org/viewtopic.php?pid=2084655#p2084655
Signed-off-by: Benjamin Asbach <asbachb.kernel@impl.it>
Tested-by: Benjamin Asbach <asbachb.kernel@impl.it>
Link: https://lore.kernel.org/r/20230331232447.37204-1-asbachb.kernel@impl.it
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sfp: add quirk enabling 2500Base-x for HG MXPD-483II

[ Upstream commit ad651d68cee75e9ac20002254c4e5d09ee67a84b ]

The HG MXPD-483II 1310nm SFP module is meant to operate with 2500Base-X,
however, in their EEPROM they incorrectly specify:
    Transceiver type                          : Ethernet: 1000BASE-LX
    ...
    BR, Nominal                               : 2600MBd

Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway.

https://forum.banana-pi.org/t/bpi-r3-sfp-module-compatibility/14573/60

Reported-by: chowtom <chowtom@gmail.com>
Tested-by: chowtom <chowtom@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpi3mr: Handle soft reset in progress fault code (0xF002)

[ Upstream commit a3d27dfdcfc27ac3f46de5391bb6d24f04af7941 ]

The driver is exiting from the fault watchdog thread if it sees the 0xF002
(Soft reset in progress) fault code.

If the driver initiates the soft reset, then the driver restarts the
watchdog at the end of the soft reset completion.  However, if the soft
reset is initiated by the firmware asynchronously, then the driver will
never restart the watchdog and never re-initialize the controller after the
asynchronous soft reset completion.

Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20230331122317.11391-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests mount: Fix mount_setattr_test builds failed

[ Upstream commit f1594bc676579133a3cd906d7d27733289edfb86 ]

When compiling selftests with target mount_setattr I encountered some errors with the below messages:
mount_setattr_test.c: In function ‘mount_setattr_thread’:
mount_setattr_test.c:343:16: error: variable ‘attr’ has initializer but incomplete type
  343 |         struct mount_attr attr = {
      |                ^~~~~~~~~~

These errors might be because of linux/mount.h is not included. This patch resolves that issue.

Signed-off-by: Anh Tuan Phan <tuananhlfc@gmail.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: wwan: t7xx: do not compile with -Werror

[ Upstream commit 362f0b6678ad1377c322a7dd237ea6785efc7342 ]

When playing with various compilers or their versions, some choke on
the t7xx code. For example (with gcc 13):
 In file included from ./arch/s390/include/generated/asm/rwonce.h:1,
                  from ../include/linux/compiler.h:247,
                  from ../include/linux/build_bug.h:5,
                  from ../include/linux/bits.h:22,
                  from ../drivers/net/wwan/t7xx/t7xx_state_monitor.c:17:
 In function 'preempt_count',
     inlined from 't7xx_fsm_append_event' at ../drivers/net/wwan/t7xx/t7xx_state_monitor.c:439:43:
 ../include/asm-generic/rwonce.h:44:26: error: array subscript 0 is outside array bounds of 'const volatile int[0]' [-Werror=array-bounds=]

There is no reason for any code in the kernel to be built with -Werror
by default. Note that we have generic CONFIG_WERROR. So if anyone wants
-Werror, they can enable that.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/all/20230330232717.1f8bf5ea@kernel.org/
Cc: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Cc: Intel Corporation <linuxwwan@intel.com>
Cc: Chiranjeevi Rapolu <chiranjeevi.rapolu@linux.intel.com>
Cc: Liu Haijun <haijun.liu@mediatek.com>
Cc: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Cc: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: da7213.c: add missing pm_runtime_disable()

[ Upstream commit 44378cd113e5f15bb0a89f5ac5a0e687b52feb90 ]

da7213.c is missing pm_runtime_disable(), thus we will get
below error when rmmod -> insmod.

$ rmmod  snd-soc-da7213.ko
$ insmod snd-soc-da7213.ko
da7213 0-001a: Unbalanced pm_runtime_enable!"

[Kuninori adjusted to latest upstream]

Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Khanh Le <khanh.le.xr@renesas.com>
Link: https://lore.kernel.org/r/87mt3xg2tk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: bytcr_rt5640: Add quirk for the Acer Iconia One 7 B1-750

[ Upstream commit e38c5e80c3d293a883c6f1d553f2146ec0bda35e ]

The Acer Iconia One 7 B1-750 tablet mostly works fine with the defaults
for an Bay Trail CR tablet. Except for the internal mic, instead of
an analog mic on IN3 a digital mic on DMIC1 is uses.

Add a quirk with these settings for this tablet.

Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230322145332.131525-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: palmas_gpadc: fix NULL dereference on rmmod

[ Upstream commit 49f76c499d38bf67803438eee88c8300d0f6ce09 ]

Calling dev_to_iio_dev() on a platform device pointer is undefined and
will make adc NULL.

Signed-off-by: Patrik Dahlström <risca@dalakolonin.se>
Link: https://lore.kernel.org/r/20230313205029.1881745-1-risca@dalakolonin.se
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: amd: yc: Add DMI entries to support Victus by HP Laptop 16-e1xxx (8A22)

[ Upstream commit 205efd4619b860404ebb5882e5a119eb3b3b3716 ]

This model requires an additional detection quirk to
enable the internal microphone.

Tried to use git send-email this time.

Signed-off-by: Ge-org Brohammer <gbrohammer@outlook.com>
Link: https://lore.kernel.org/r/PAVP195MB2261322C220E95D7F4B2732ADABC9@PAVP195MB2261.EURP195.PROD.OUTLOOK.COM
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/hyperv: Block root partition functionality in a Confidential VM

[ Upstream commit f8acb24aaf89fc46cd953229462ea8abe31b395f ]

Hyper-V should never specify a VM that is a Confidential VM and also
running in the root partition.  Nonetheless, explicitly block such a
combination to guard against a compromised Hyper-V maliciously trying to
exploit root partition functionality in a Confidential VM to expose
Confidential VM secrets. No known bug is being fixed, but the attack
surface for Confidential VMs on Hyper-V is reduced.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1678894453-95392-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: soc-pcm: fix hw->formats cleared by soc_pcm_hw_init() for dpcm

[ Upstream commit 083a25b18d6ad9f1f540e629909aa3eaaaf01823 ]

The hw->formats may be set by snd_dmaengine_pcm_refine_runtime_hwparams()
in component's startup()/open(), but soc_pcm_hw_init() will init
hw->formats in dpcm_runtime_setup_fe() after component's startup()/open(),
which causes the valuable hw->formats to be cleared.

So need to store the hw->formats before initialization, then restore
it after initialization.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1678346017-3660-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: soc-acpi: add table for Intel 'Rooks County' NUC M15

[ Upstream commit 9c691a42b8926c8966561265cdae3ddc7464d3a2 ]

Same topology as the HP Omen 16-k0005TX, except with the rt1316 amp
on link2.

Link: https://github.com/thesofproject/linux/issues/4088
Signed-off-by: Eugene Huang <eugene.huang99@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314090553.498664-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASOC: Intel: sof_sdw: add quirk for Intel 'Rooks County' NUC M15

[ Upstream commit 3c728b1bc5b99c5275ac5c7788ef814c0e51ef54 ]

Same quirks as the 'Bishop County' NUC M15, except the rt711 is in the
'JD2 100K' jack detection mode.

Link: https://github.com/thesofproject/linux/issues/4088
Signed-off-by: Eugene Huang <eugene.huang99@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314090553.498664-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 6.1.27

Link: https://lore.kernel.org/r/20230428112040.063291126@linuxfoundation.org
Tested-by: Markus Reichelt <lkt+2023@mareichelt.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: No need to relocate the dtb as it lies in the fixmap region

commit 1b50f956c8fe9082bdee4a9cfd798149c52f7043 upstream.

We used to access the dtb via its linear mapping address but now that the
dtb early mapping was moved in the fixmap region, we can keep using this
address since it is present in swapper_pg_dir, and remove the dtb
relocation.

Note that the relocation was wrong anyway since early_memremap() is
restricted to 256K whereas the maximum fdt size is 2MB.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230329081932.79831-4-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Do not set initial_boot_params to the linear address of the dtb

commit f1581626071c8e37c58c5e8f0b4126b17172a211 upstream.

early_init_dt_verify() is already called in parse_dtb() and since the dtb
address does not change anymore (it is now in the fixmap region), no need
to reset initial_boot_params by calling early_init_dt_verify() again.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230329081932.79831-3-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Move early dtb mapping into the fixmap region

commit ef69d2559fe91f23d27a3d6fd640b5641787d22e upstream.

riscv establishes 2 virtual mappings:

- early_pg_dir maps the kernel which allows to discover the system
  memory
- swapper_pg_dir installs the final mapping (linear mapping included)

We used to map the dtb in early_pg_dir using DTB_EARLY_BASE_VA, and this
mapping was not carried over in swapper_pg_dir. It happens that
early_init_fdt_scan_reserved_mem() must be called before swapper_pg_dir is
setup otherwise we could allocate reserved memory defined in the dtb.
And this function initializes reserved_mem variable with addresses that
lie in the early_pg_dir dtb mapping: when those addresses are reused
with swapper_pg_dir, this mapping does not exist and then we trap.

The previous "fix" was incorrect as early_init_fdt_scan_reserved_mem()
must be called before swapper_pg_dir is set up otherwise we could
allocate in reserved memory defined in the dtb.

So move the dtb mapping in the fixmap region which is established in
early_pg_dir and handed over to swapper_pg_dir.

This patch had to be backported because:
- the documentation for sv57 is not present here (as sv48/57 are not
  present)

Fixes: 922b0375fc93 ("riscv: Fix memblock reservation for device tree blob")
Fixes: 8f3a2b4a96dc ("RISC-V: Move DT mapping outof fixmap")
Fixes: 50e63dd8ed92 ("riscv: fix reserved memory setup")
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/all/f8e67f82-103d-156c-deb0-d6d6e2756f5e@microchip.com/
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230329081932.79831-2-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver core: Don't require dynamic_debug for initcall_debug probe timing

commit e2f06aa885081e1391916367f53bad984714b4db upstream.

Don't require the use of dynamic debug (or modification of the kernel to
add a #define DEBUG to the top of this file) to get the printk message
about driver probe timing. This printk is only emitted when
initcall_debug is enabled on the kernel commandline, and it isn't
immediately obvious that you have to do something else to debug boot
timing issues related to driver probe. Add a comment too so it doesn't
get converted back to pr_debug().

Fixes: eb7fbc9fb118 ("driver core: Add missing '\n' in log messages")
Cc: stable <stable@kernel.org>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Brian Norris <briannorris@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230412225842.3196599-1-swboyd@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add UNISOC vendor and TOZED LT70C product

commit a095edfc15f0832e046ae23964e249ef5c95af87 upstream.

Add UNISOC vendor ID and TOZED LT70-C modem which is based from UNISOC
SL8563. The modem supports the NCM mode. Interface 0 is used for running
the AT commands. Interface 12 is the ADB interface.

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1782 ProdID=4055 Rev=04.04
S:  Manufacturer=Unisoc Phone
S:  Product=Unisoc Phone
S:  SerialNumber=<redacted>
C:  #Ifs=14 Cfg#= 1 Atr=c0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#=10 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#=11 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#=12 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#=13 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E:  Ad=84(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E:  Ad=86(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 6 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E:  Ad=88(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 7 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230417152003.243248-1-arinc.unal@arinc9.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix uninitialized variable warnings

commit 8ba7d5f5ba931be68a94b8c91bcced1622934e7a upstream.

There are some warnings on older compilers (gcc 10, 7) or non-x86_64
architectures (aarch64).  As btrfs wants to enable -Wmaybe-uninitialized
by default, fix the warnings even though it's not necessary on recent
compilers (gcc 12+).

../fs/btrfs/volumes.c: In function ‘btrfs_init_new_device’:
../fs/btrfs/volumes.c:2703:3: error: ‘seed_devices’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
 2703 |   btrfs_setup_sprout(fs_info, seed_devices);
      |   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

../fs/btrfs/send.c: In function ‘get_cur_inode_state’:
../include/linux/compiler.h:70:32: error: ‘right_gen’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
   70 |   (__if_trace.miss_hit[1]++,1) :  \
      |                                ^
../fs/btrfs/send.c:1878:6: note: ‘right_gen’ was declared here
 1878 |  u64 right_gen;
      |      ^~~~~~~~~

Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Cc: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bluetooth: Perform careful capability checks in hci_sock_ioctl()

commit 25c150ac103a4ebeed0319994c742a90634ddf18 upstream.

Previously, capability was checked using capable(), which verified that the
caller of the ioctl system call had the required capability. In addition,
the result of the check would be stored in the HCI_SOCK_TRUSTED flag,
making it persistent for the socket.

However, malicious programs can abuse this approach by deliberately sharing
an HCI socket with a privileged task. The HCI socket will be marked as
trusted when the privileged task occasionally makes an ioctl call.

This problem can be solved by using sk_capable() to check capability, which
ensures that not only the current task but also the socket opener has the
specified capability, thus reducing the risk of privilege escalation
through the previously identified vulnerability.

Cc: stable@vger.kernel.org
Fixes: f81f5b2db869 ("Bluetooth: Send control open and close messages for HCI raw sockets")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xNU

commit 782eea0c89f7d071d6b56ecfa1b8b0c81164b9be upstream.

commit 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
changed the policy such that I2C touchpads may be able to wake up the
system by default if the system is configured as such.

However on Clevo NL5xNU there is a mistake in the ACPI tables that the
TP_ATTN# signal connected to GPIO 9 is configured as ActiveLow and level
triggered but connected to a pull up. As soon as the system suspends the
touchpad loses power and then the system wakes up.

To avoid this problem, introduce a quirk for this model that will prevent
the wakeup capability for being set for GPIO 9.

This patch is analoge to a very similar patch for NL5xRU, just the DMI
string changed.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/fb-helper: set x/yres_virtual in drm_fb_helper_check_var

commit 1935f0deb6116dd785ea64d8035eab0ff441255b upstream.

Drivers are supposed to fix this up if needed if they don't outright
reject it. Uncovered by 6c11df58fd1a ("fbmem: Check virtual screen
sizes in fb_set_var()").

Reported-by: syzbot+20dcf81733d43ddff661@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=c5faf983bfa4a607de530cd3bb008888bf06cefc
Cc: stable@vger.kernel.org # v5.4+
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230404194038.472803-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: brcmfmac: slab-out-of-bounds read in brcmf_get_assoc_ies()

commit 0da40e018fd034d87c9460123fa7f897b69fdee7 upstream.

Fix a slab-out-of-bounds read that occurs in kmemdup() called from
brcmf_get_assoc_ies().
The bug could occur when assoc_info->req_len, data from a URB provided
by a USB device, is bigger than the size of buffer which is defined as
WL_EXTRA_BUF_MAX.

Add the size check for req_len/resp_len of assoc_info.

Found by a modified version of syzkaller.

[   46.592467][    T7] ==================================================================
[   46.594687][    T7] BUG: KASAN: slab-out-of-bounds in kmemdup+0x3e/0x50
[   46.596572][    T7] Read of size 3014656 at addr ffff888019442000 by task kworker/0:1/7
[   46.598575][    T7]
[   46.599157][    T7] CPU: 0 PID: 7 Comm: kworker/0:1 Tainted: G           O      5.14.0+ #145
[   46.601333][    T7] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[   46.604360][    T7] Workqueue: events brcmf_fweh_event_worker
[   46.605943][    T7] Call Trace:
[   46.606584][    T7]  dump_stack_lvl+0x8e/0xd1
[   46.607446][    T7]  print_address_description.constprop.0.cold+0x93/0x334
[   46.608610][    T7]  ? kmemdup+0x3e/0x50
[   46.609341][    T7]  kasan_report.cold+0x79/0xd5
[   46.610151][    T7]  ? kmemdup+0x3e/0x50
[   46.610796][    T7]  kasan_check_range+0x14e/0x1b0
[   46.611691][    T7]  memcpy+0x20/0x60
[   46.612323][    T7]  kmemdup+0x3e/0x50
[   46.612987][    T7]  brcmf_get_assoc_ies+0x967/0xf60
[   46.613904][    T7]  ? brcmf_notify_vif_event+0x3d0/0x3d0
[   46.614831][    T7]  ? lock_chain_count+0x20/0x20
[   46.615683][    T7]  ? mark_lock.part.0+0xfc/0x2770
[   46.616552][    T7]  ? lock_chain_count+0x20/0x20
[   46.617409][    T7]  ? mark_lock.part.0+0xfc/0x2770
[   46.618244][    T7]  ? lock_chain_count+0x20/0x20
[   46.619024][    T7]  brcmf_bss_connect_done.constprop.0+0x241/0x2e0
[   46.620019][    T7]  ? brcmf_parse_configure_security.isra.0+0x2a0/0x2a0
[   46.620818][    T7]  ? __lock_acquire+0x181f/0x5790
[   46.621462][    T7]  brcmf_notify_connect_status+0x448/0x1950
[   46.622134][    T7]  ? rcu_read_lock_bh_held+0xb0/0xb0
[   46.622736][    T7]  ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0
[   46.623390][    T7]  ? find_held_lock+0x2d/0x110
[   46.623962][    T7]  ? brcmf_fweh_event_worker+0x19f/0xc60
[   46.624603][    T7]  ? mark_held_locks+0x9f/0xe0
[   46.625145][    T7]  ? lockdep_hardirqs_on_prepare+0x3e0/0x3e0
[   46.625871][    T7]  ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0
[   46.626545][    T7]  brcmf_fweh_call_event_handler.isra.0+0x90/0x100
[   46.627338][    T7]  brcmf_fweh_event_worker+0x557/0xc60
[   46.627962][    T7]  ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100
[   46.628736][    T7]  ? rcu_read_lock_sched_held+0xa1/0xd0
[   46.629396][    T7]  ? rcu_read_lock_bh_held+0xb0/0xb0
[   46.629970][    T7]  ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[   46.630649][    T7]  process_one_work+0x92b/0x1460
[   46.631205][    T7]  ? pwq_dec_nr_in_flight+0x330/0x330
[   46.631821][    T7]  ? rwlock_bug.part.0+0x90/0x90
[   46.632347][    T7]  worker_thread+0x95/0xe00
[   46.632832][    T7]  ? __kthread_parkme+0x115/0x1e0
[   46.633393][    T7]  ? process_one_work+0x1460/0x1460
[   46.633957][    T7]  kthread+0x3a1/0x480
[   46.634369][    T7]  ? set_kthread_struct+0x120/0x120
[   46.634933][    T7]  ret_from_fork+0x1f/0x30
[   46.635431][    T7]
[   46.635687][    T7] Allocated by task 7:
[   46.636151][    T7]  kasan_save_stack+0x1b/0x40
[   46.636628][    T7]  __kasan_kmalloc+0x7c/0x90
[   46.637108][    T7]  kmem_cache_alloc_trace+0x19e/0x330
[   46.637696][    T7]  brcmf_cfg80211_attach+0x4a0/0x4040
[   46.638275][    T7]  brcmf_attach+0x389/0xd40
[   46.638739][    T7]  brcmf_usb_probe+0x12de/0x1690
[   46.639279][    T7]  usb_probe_interface+0x2aa/0x760
[   46.639820][    T7]  really_probe+0x205/0xb70
[   46.640342][    T7]  __driver_probe_device+0x311/0x4b0
[   46.640876][    T7]  driver_probe_device+0x4e/0x150
[   46.641445][    T7]  __device_attach_driver+0x1cc/0x2a0
[   46.642000][    T7]  bus_for_each_drv+0x156/0x1d0
[   46.642543][    T7]  __device_attach+0x23f/0x3a0
[   46.643065][    T7]  bus_probe_device+0x1da/0x290
[   46.643644][    T7]  device_add+0xb7b/0x1eb0
[   46.644130][    T7]  usb_set_configuration+0xf59/0x16f0
[   46.644720][    T7]  usb_generic_driver_probe+0x82/0xa0
[   46.645295][    T7]  usb_probe_device+0xbb/0x250
[   46.645786][    T7]  really_probe+0x205/0xb70
[   46.646258][    T7]  __driver_probe_device+0x311/0x4b0
[   46.646804][    T7]  driver_probe_device+0x4e/0x150
[   46.647387][    T7]  __device_attach_driver+0x1cc/0x2a0
[   46.647926][    T7]  bus_for_each_drv+0x156/0x1d0
[   46.648454][    T7]  __device_attach+0x23f/0x3a0
[   46.648939][    T7]  bus_probe_device+0x1da/0x290
[   46.649478][    T7]  device_add+0xb7b/0x1eb0
[   46.649936][    T7]  usb_new_device.cold+0x49c/0x1029
[   46.650526][    T7]  hub_event+0x1c98/0x3950
[   46.650975][    T7]  process_one_work+0x92b/0x1460
[   46.651535][    T7]  worker_thread+0x95/0xe00
[   46.651991][    T7]  kthread+0x3a1/0x480
[   46.652413][    T7]  ret_from_fork+0x1f/0x30
[   46.652885][    T7]
[   46.653131][    T7] The buggy address belongs to the object at ffff888019442000
[   46.653131][    T7]  which belongs to the cache kmalloc-2k of size 2048
[   46.654669][    T7] The buggy address is located 0 bytes inside of
[   46.654669][    T7]  2048-byte region [ffff888019442000, ffff888019442800)
[   46.656137][    T7] The buggy address belongs to the page:
[   46.656720][    T7] page:ffffea0000651000 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x19440
[   46.657792][    T7] head:ffffea0000651000 order:3 compound_mapcount:0 compound_pincount:0
[   46.658673][    T7] flags: 0x100000000010200(slab|head|node=0|zone=1)
[   46.659422][    T7] raw: 0100000000010200 0000000000000000 dead000000000122 ffff888100042000
[   46.660363][    T7] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000
[   46.661236][    T7] page dumped because: kasan: bad access detected
[   46.661956][    T7] page_owner tracks the page as allocated
[   46.662588][    T7] page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP), pid 7, ts 31136961085, free_ts 0
[   46.664271][    T7]  prep_new_page+0x1aa/0x240
[   46.664763][    T7]  get_page_from_freelist+0x159a/0x27c0
[   46.665340][    T7]  __alloc_pages+0x2da/0x6a0
[   46.665847][    T7]  alloc_pages+0xec/0x1e0
[   46.666308][    T7]  allocate_slab+0x380/0x4e0
[   46.666770][    T7]  ___slab_alloc+0x5bc/0x940
[   46.667264][    T7]  __slab_alloc+0x6d/0x80
[   46.667712][    T7]  kmem_cache_alloc_trace+0x30a/0x330
[   46.668299][    T7]  brcmf_usbdev_qinit.constprop.0+0x50/0x470
[   46.668885][    T7]  brcmf_usb_probe+0xc97/0x1690
[   46.669438][    T7]  usb_probe_interface+0x2aa/0x760
[   46.669988][    T7]  really_probe+0x205/0xb70
[   46.670487][    T7]  __driver_probe_device+0x311/0x4b0
[   46.671031][    T7]  driver_probe_device+0x4e/0x150
[   46.671604][    T7]  __device_attach_driver+0x1cc/0x2a0
[   46.672192][    T7]  bus_for_each_drv+0x156/0x1d0
[   46.672739][    T7] page_owner free stack trace missing
[   46.673335][    T7]
[   46.673620][    T7] Memory state around the buggy address:
[   46.674213][    T7]  ffff888019442700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   46.675083][    T7]  ffff888019442780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   46.675994][    T7] >ffff888019442800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   46.676875][    T7]                    ^
[   46.677323][    T7]  ffff888019442880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   46.678190][    T7]  ffff888019442900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   46.679052][    T7] ==================================================================
[   46.679945][    T7] Disabling lock debugging due to kernel taint
[   46.680725][    T7] Kernel panic - not syncing:

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230309104457.22628-1-jisoo.jang@yonsei.ac.kr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: fix accept vs worker race

commit 63740448a32eb662e05894425b47bcc5814136f4 upstream.

The mptcp worker and mptcp_accept() can race, as reported by Christoph:

refcount_t: addition on 0; use-after-free.
WARNING: CPU: 1 PID: 14351 at lib/refcount.c:25 refcount_warn_saturate+0x105/0x1b0 lib/refcount.c:25
Modules linked in:
CPU: 1 PID: 14351 Comm: syz-executor.2 Not tainted 6.3.0-rc1-gde5e8fd0123c #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:refcount_warn_saturate+0x105/0x1b0 lib/refcount.c:25
Code: 02 31 ff 89 de e8 1b f0 a7 ff 84 db 0f 85 6e ff ff ff e8 3e f5 a7 ff 48 c7 c7 d8 c7 34 83 c6 05 6d 2d 0f 02 01 e8 cb 3d 90 ff <0f> 0b e9 4f ff ff ff e8 1f f5 a7 ff 0f b6 1d 54 2d 0f 02 31 ff 89
RSP: 0018:ffffc90000a47bf8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88802eae98c0 RSI: ffffffff81097d4f RDI: 0000000000000001
RBP: ffff88802e712180 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: ffff88802eaea148 R12: ffff88802e712100
R13: ffff88802e712a88 R14: ffff888005cb93a8 R15: ffff88802e712a88
FS:  0000000000000000(0000) GS:ffff88803ed00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f277fd89120 CR3: 0000000035486002 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __refcount_add include/linux/refcount.h:199 [inline]
 __refcount_inc include/linux/refcount.h:250 [inline]
 refcount_inc include/linux/refcount.h:267 [inline]
 sock_hold include/net/sock.h:775 [inline]
 __mptcp_close+0x4c6/0x4d0 net/mptcp/protocol.c:3051
 mptcp_close+0x24/0xe0 net/mptcp/protocol.c:3072
 inet_release+0x56/0xa0 net/ipv4/af_inet.c:429
 __sock_release+0x51/0xf0 net/socket.c:653
 sock_close+0x18/0x20 net/socket.c:1395
 __fput+0x113/0x430 fs/file_table.c:321
 task_work_run+0x96/0x100 kernel/task_work.c:179
 exit_task_work include/linux/task_work.h:38 [inline]
 do_exit+0x4fc/0x10c0 kernel/exit.c:869
 do_group_exit+0x51/0xf0 kernel/exit.c:1019
 get_signal+0x12b0/0x1390 kernel/signal.c:2859
 arch_do_signal_or_restart+0x25/0x260 arch/x86/kernel/signal.c:306
 exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
 exit_to_user_mode_prepare+0x131/0x1a0 kernel/entry/common.c:203
 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
 syscall_exit_to_user_mode+0x19/0x40 kernel/entry/common.c:296
 do_syscall_64+0x46/0x90 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7fec4b4926a9
Code: Unable to access opcode bytes at 0x7fec4b49267f.
RSP: 002b:00007fec49f9dd78 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 00000000006bc058 RCX: 00007fec4b4926a9
RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00000000006bc058
RBP: 00000000006bc050 R08: 00000000007df998 R09: 00000000007df998
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006bc05c
R13: fffffffffffffea8 R14: 000000000000000b R15: 000000000001fe40
 </TASK>

The root cause is that the worker can force fallback to TCP the first
mptcp subflow, actually deleting the unaccepted msk socket.

We can explicitly prevent the race delaying the unaccepted msk deletion
at listener shutdown time. In case the closed subflow is later accepted,
just drop the mptcp context and let the user-space deal with the
paired mptcp socket.

Fixes: b6985b9b8295 ("mptcp: use the workqueue to destroy unaccepted sockets")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/375
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: stops worker on unaccepted sockets at listener close

commit 2a6a870e44dd88f1a6a2893c65ef756a9edfb4c7 upstream.

This is a partial revert of the blamed commit, with a relevant
change: mptcp_subflow_queue_clean() now just change the msk
socket status and stop the worker, so that the UaF issue addressed
by the blamed commit is not re-introduced.

The above prevents the mptcp worker from running concurrently with
inet_csk_listen_stop(), as such race would trigger a warning, as
reported by Christoph:

RSP: 002b:00007f784fe09cd8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
WARNING: CPU: 0 PID: 25807 at net/ipv4/inet_connection_sock.c:1387 inet_csk_listen_stop+0x664/0x870 net/ipv4/inet_connection_sock.c:1387
RAX: ffffffffffffffda RBX: 00000000006bc050 RCX: 00007f7850afd6a9
RDX: 0000000000000000 RSI: 0000000020000340 RDI: 0000000000000004
Modules linked in:
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006bc05c
R13: fffffffffffffea8 R14: 00000000006bc050 R15: 000000000001fe40

 </TASK>
CPU: 0 PID: 25807 Comm: syz-executor.7 Not tainted 6.2.0-g778e54711659 #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:inet_csk_listen_stop+0x664/0x870 net/ipv4/inet_connection_sock.c:1387
RAX: 0000000000000000 RBX: ffff888100dfbd40 RCX: 0000000000000000
RDX: ffff8881363aab80 RSI: ffffffff81c494f4 RDI: 0000000000000005
RBP: ffff888126dad080 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffff888100dfe040
R13: 0000000000000001 R14: 0000000000000000 R15: ffff888100dfbdd8
FS:  00007f7850a2c800(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32d26000 CR3: 000000012fdd8006 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <TASK>
 __tcp_close+0x5b2/0x620 net/ipv4/tcp.c:2875
 __mptcp_close_ssk+0x145/0x3d0 net/mptcp/protocol.c:2427
 mptcp_destroy_common+0x8a/0x1c0 net/mptcp/protocol.c:3277
 mptcp_destroy+0x41/0x60 net/mptcp/protocol.c:3304
 __mptcp_destroy_sock+0x56/0x140 net/mptcp/protocol.c:2965
 __mptcp_close+0x38f/0x4a0 net/mptcp/protocol.c:3057
 mptcp_close+0x24/0xe0 net/mptcp/protocol.c:3072
 inet_release+0x53/0xa0 net/ipv4/af_inet.c:429
 __sock_release+0x4e/0xf0 net/socket.c:651
 sock_close+0x15/0x20 net/socket.c:1393
 __fput+0xff/0x420 fs/file_table.c:321
 task_work_run+0x8b/0xe0 kernel/task_work.c:179
 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
 exit_to_user_mode_prepare+0x113/0x120 kernel/entry/common.c:203
 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
 syscall_exit_to_user_mode+0x1d/0x40 kernel/entry/common.c:296
 do_syscall_64+0x46/0x90 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f7850af70dc
RAX: 0000000000000000 RBX: 0000000000000004 RCX: 00007f7850af70dc
RDX: 00007f7850a2c800 RSI: 0000000000000002 RDI: 0000000000000003
RBP: 00000000006bd980 R08: 0000000000000000 R09: 00000000000018a0
R10: 00000000316338a4 R11: 0000000000000293 R12: 0000000000211e31
R13: 00000000006bc05c R14: 00007f785062c000 R15: 0000000000211af0

Fixes: 0a3f4f1f9c27 ("mptcp: fix UaF in listener shutdown")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/371
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/mempolicy: fix use-after-free of VMA iterator

commit f4e9e0e69468583c2c6d9d5c7bfc975e292bf188 upstream.

set_mempolicy_home_node() iterates over a list of VMAs and calls
mbind_range() on each VMA, which also iterates over the singular list of
the VMA passed in and potentially splits the VMA.  Since the VMA iterator
is not passed through, set_mempolicy_home_node() may now point to a stale
node in the VMA tree.  This can result in a UAF as reported by syzbot.

Avoid the stale maple tree node by passing the VMA iterator through to the
underlying call to split_vma().

mbind_range() is also overly complicated, since there are two calling
functions and one already handles iterating over the VMAs.  Simplify
mbind_range() to only handle merging and splitting of the VMAs.

Align the new loop in do_mbind() and existing loop in
set_mempolicy_home_node() to use the reduced mbind_range() function.  This
allows for a single location of the range calculation and avoids
constantly looking up the previous VMA (since this is a loop over the
VMAs).

Link: https://lore.kernel.org/linux-mm/000000000000c93feb05f87e24ad@google.com/
Fixes: 66850be55e8e ("mm/mempolicy: use vma iterator & maple state instead of vma linked list")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: syzbot+a7c1ec5b1d71ceaa5186@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/20230410152205.2294819-1-Liam.Howlett@oracle.com
Tested-by: syzbot+a7c1ec5b1d71ceaa5186@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Retry fault if vma_lookup() results become invalid

commit 13ec9308a85702af7c31f3638a2720863848a7f2 upstream.

Read mmu_invalidate_seq before dropping the mmap_lock so that KVM can
detect if the results of vma_lookup() (e.g. vma_shift) become stale
before it acquires kvm->mmu_lock. This fixes a theoretical bug where a
VMA could be changed by userspace after vma_lookup() and before KVM
reads the mmu_invalidate_seq, causing KVM to install page table entries
based on a (possibly) no-longer-valid vma_shift.

Re-order the MMU cache top-up to earlier in user_mem_abort() so that it
is not done after KVM has read mmu_invalidate_seq (i.e. so as to avoid
inducing spurious fault retries).

This bug has existed since KVM/ARM's inception. It's unlikely that any
sane userspace currently modifies VMAs in such a way as to trigger this
race. And even with directed testing I was unable to reproduce it. But a
sufficiently motivated host userspace might be able to exploit this
race.

Fixes: 94f8e6418d39 ("KVM: ARM: Handle guest faults in KVM")
Cc: stable@vger.kernel.org
Reported-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230313235454.2964067-1-dmatlack@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
[will: Use FSC_PERM instead of ESR_ELx_FSC_PERM]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: phy-brcm-usb: Utilize platform_get_irq_byname_optional()

commit 53bffe0055741440a6c91abb80bad1c62ea443e3 upstream.

The wake-up interrupt lines are entirely optional, avoid printing
messages that interrupts were not found by switching to the _optional
variant.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Justin Chen <justinpopo6@gmail.com>
Link: https://lore.kernel.org/r/20221026224450.2958762-1-f.fainelli@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

um: Only disable SSE on clang to work around old GCC bugs

commit a3046a618a284579d1189af8711765f553eed707 upstream.

As part of the Rust support for UML, we disable SSE (and similar flags)
to match the normal x86 builds. This both makes sense (we ideally want a
similar configuration to x86), and works around a crash bug with SSE
generation under Rust with LLVM.

However, this breaks compiling stdlib.h under gcc < 11, as the x86_64
ABI requires floating-point return values be stored in an SSE register.
gcc 11 fixes this by only doing register allocation when a function is
actually used, and since we never use atof(), it shouldn't be a problem:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99652

Nevertheless, only disable SSE on clang setups, as that's a simple way
of working around everyone's bugs.

Fixes: 884981867947 ("rust: arch/um: Disable FP/SIMD instruction to match x86")
Reported-by: Roberto Sassu <roberto.sassu@huaweicloud.com>
Link: https://lore.kernel.org/linux-um/6df2ecef9011d85654a82acd607fdcbc93ad593c.camel@huaweicloud.com/
Tested-by: Roberto Sassu <roberto.sassu@huaweicloud.com>
Tested-by: SeongJae Park <sj@kernel.org>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Tested-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 6.1.26

Link: https://lore.kernel.org/r/20230424131133.829259077@linuxfoundation.org
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Markus Reichelt <lkt+2023@mareichelt.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASN.1: Fix check for strdup() success

commit 5a43001c01691dcbd396541e6faa2c0077378f48 upstream.

It seems there is a misprint in the check of strdup() return code that
can lead to NULL pointer dereference.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 4520c6a49af8 ("X.509: Add simple ASN.1 grammar compiler")
Signed-off-by: Ekaterina Orlova <vorobushek.ok@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: keyrings@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Link: https://lore.kernel.org/r/20230315172130.140-1-vorobushek.ok@gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: fsl_sai: Fix pins setting for i.MX8QM platform

commit 238787157d83969e5149c8e99787d5d90e85fbe5 upstream.

SAI on i.MX8QM platform supports the data lines up to 4. So the pins
setting should be corrected to 4.

Fixes: eba0f0077519 ("ASoC: fsl_sai: Enable combine mode soft")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/20230418094259.4150771-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: fsl_asrc_dma: fix potential null-ptr-deref

commit 86a24e99c97234f87d9f70b528a691150e145197 upstream.

dma_request_slave_channel() may return NULL which will lead to
NULL pointer dereference error in 'tmp_chan->private'.

Correct this behaviour by, first, switching from deprecated function
dma_request_slave_channel() to dma_request_chan(). Secondly, enable
sanity check for the resuling value of dma_request_chan().
Also, fix description that follows the enacted changes and that
concerns the use of dma_request_slave_channel().

Fixes: 706e2c881158 ("ASoC: fsl_asrc_dma: Reuse the dma channel if available in Back-End")
Co-developed-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230417133242.53339-1-n.zhandarovich@fintech.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: SOF: pm: Tear down pipelines only if DSP was active

commit 0b186bb06198653d74a141902a7739e0bde20cf4 upstream.

With PCI if the device was suspended it is brought back to full
power and then suspended again.

This doesn't happen when device is described via DT.

We need to make sure that we tear down pipelines only if the device
was previously active (thus the pipelines were setup).

Otherwise, we can break the use_count:

[  219.009743] sof-audio-of-imx8m 3b6e8000.dsp:
sof_ipc3_tear_down_all_pipelines: widget PIPELINE.2.SAI3.IN is still in use: count -1

and after this everything stops working.

Fixes: d185e0689abc ("ASoC: SOF: pm: Always tear down pipelines before DSP suspend")
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230405092655.19587-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/page_alloc: fix potential deadlock on zonelist_update_seq seqlock

commit 1007843a91909a4995ee78a538f62d8665705b66 upstream.

syzbot is reporting circular locking dependency which involves
zonelist_update_seq seqlock [1], for this lock is checked by memory
allocation requests which do not need to be retried.

One deadlock scenario is kmalloc(GFP_ATOMIC) from an interrupt handler.

  CPU0
  ----
  __build_all_zonelists() {
    write_seqlock(&zonelist_update_seq); // makes zonelist_update_seq.seqcount odd
    // e.g. timer interrupt handler runs at this moment
      some_timer_func() {
        kmalloc(GFP_ATOMIC) {
          __alloc_pages_slowpath() {
            read_seqbegin(&zonelist_update_seq) {
              // spins forever because zonelist_update_seq.seqcount is odd
            }
          }
        }
      }
    // e.g. timer interrupt handler finishes
    write_sequnlock(&zonelist_update_seq); // makes zonelist_update_seq.seqcount even
  }

This deadlock scenario can be easily eliminated by not calling
read_seqbegin(&zonelist_update_seq) from !__GFP_DIRECT_RECLAIM allocation
requests, for retry is applicable to only __GFP_DIRECT_RECLAIM allocation
requests.  But Michal Hocko does not know whether we should go with this
approach.

Another deadlock scenario which syzbot is reporting is a race between
kmalloc(GFP_ATOMIC) from tty_insert_flip_string_and_push_buffer() with
port->lock held and printk() from __build_all_zonelists() with
zonelist_update_seq held.

  CPU0                                   CPU1
  ----                                   ----
  pty_write() {
    tty_insert_flip_string_and_push_buffer() {
                                         __build_all_zonelists() {
                                           write_seqlock(&zonelist_update_seq);
                                           build_zonelists() {
                                             printk() {
                                               vprintk() {
                                                 vprintk_default() {
                                                   vprintk_emit() {
                                                     console_unlock() {
                                                       console_flush_all() {
                                                         console_emit_next_record() {
                                                           con->write() = serial8250_console_write() {
      spin_lock_irqsave(&port->lock, flags);
      tty_insert_flip_string() {
        tty_insert_flip_string_fixed_flag() {
          __tty_buffer_request_room() {
            tty_buffer_alloc() {
              kmalloc(GFP_ATOMIC | __GFP_NOWARN) {
                __alloc_pages_slowpath() {
                  zonelist_iter_begin() {
                    read_seqbegin(&zonelist_update_seq); // spins forever because zonelist_update_seq.seqcount is odd
                                                             spin_lock_irqsave(&port->lock, flags); // spins forever because port->lock is held
                    }
                  }
                }
              }
            }
          }
        }
      }
      spin_unlock_irqrestore(&port->lock, flags);
                                                             // message is printed to console
                                                             spin_unlock_irqrestore(&port->lock, flags);
                                                           }
                                                         }
                                                       }
                                                     }
                                                   }
                                                 }
                                               }
                                             }
                                           }
                                           write_sequnlock(&zonelist_update_seq);
                                         }
    }
  }

This deadlock scenario can be eliminated by

  preventing interrupt context from calling kmalloc(GFP_ATOMIC)

and

  preventing printk() from calling console_flush_all()

while zonelist_update_seq.seqcount is odd.

Since Petr Mladek thinks that __build_all_zonelists() can become a
candidate for deferring printk() [2], let's address this problem by

  disabling local interrupts in order to avoid kmalloc(GFP_ATOMIC)

and

  disabling synchronous printk() in order to avoid console_flush_all()

.

As a side effect of minimizing duration of zonelist_update_seq.seqcount
being odd by disabling synchronous printk(), latency at
read_seqbegin(&zonelist_update_seq) for both !__GFP_DIRECT_RECLAIM and
__GFP_DIRECT_RECLAIM allocation requests will be reduced.  Although, from
lockdep perspective, not calling read_seqbegin(&zonelist_update_seq) (i.e.
do not record unnecessary locking dependency) from interrupt context is
still preferable, even if we don't allow calling kmalloc(GFP_ATOMIC)
inside
write_seqlock(&zonelist_update_seq)/write_sequnlock(&zonelist_update_seq)
section...

Link: https://lkml.kernel.org/r/8796b95c-3da3-5885-fddd-6ef55f30e4d3@I-love.SAKURA.ne.jp
Fixes: 3d36424b3b58 ("mm/page_alloc: fix race condition between build_all_zonelists and page allocation")
Link: https://lkml.kernel.org/r/ZCrs+1cDqPWTDFNM@alley
Reported-by: syzbot <syzbot+223c7461c58c58a4cb10@syzkaller.appspotmail.com>
Link: https://syzkaller.appspot.com/bug?extid=223c7461c58c58a4cb10
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Petr Mladek <pmladek@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Patrick Daly <quic_pdaly@quicinc.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fpga: bridge: properly initialize bridge device before populating children

commit dc70eb868b9cd2ca01313e5a394e6ea001d513e9 upstream.

The current code path can lead to warnings because of uninitialized device,
which contains, as a consequence, uninitialized kobject. The uninitialized
device is passed to of_platform_populate, which will at some point, while
creating child device, try to get a reference on uninitialized parent,
resulting in the following warning:

kobject: '(null)' ((ptrval)): is not initialized, yet kobject_get() is
being called.

The warning is observed after migrating a kernel 5.10.x to 6.1.x.
Reverting commit 0d70af3c2530 ("fpga: bridge: Use standard dev_release for
class driver") seems to remove the warning.
This commit aggregates device_initialize() and device_add() into
device_register() but this new call is done AFTER of_platform_populate

Fixes: 0d70af3c2530 ("fpga: bridge: Use standard dev_release for class driver")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20230404133102.2837535-2-alexis.lothore@bootlin.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: at91-sama5d2_adc: fix an error code in at91_adc_allocate_trigger()

commit 73a428b37b9b538f8f8fe61caa45e7f243bab87c upstream.

The at91_adc_allocate_trigger() function is supposed to return error
pointers.  Returning a NULL will cause an Oops.

Fixes: 5e1a1da0f8c9 ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/5d728f9d-31d1-410d-a0b3-df6a63a2c8ba@kili.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: pegasus-notetaker - check pipe type when probing

commit b3d80fd27a3c2d8715a40cbf876139b56195f162 upstream.

Fix WARNING in pegasus_open/usb_submit_urb
Syzbot bug: https://syzkaller.appspot.com/bug?id=bbc107584dcf3262253ce93183e51f3612aaeb13

Warning raised because pegasus_driver submits transfer request for
bogus URB (pipe type does not match endpoint type). Add sanity check at
probe time for pipe value extracted from endpoint descriptor. Probe
will fail if sanity check fails.

Reported-and-tested-by: syzbot+04ee0cb4caccaed12d78@syzkaller.appspotmail.com
Signed-off-by: Soumya Negi <soumya.negi97@gmail.com>
Link: https://lore.kernel.org/r/20230404074145.11523-1-soumya.negi97@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc: disable '-Warray-bounds' for gcc-13 too

commit 0da6e5fd6c3726723e275603426e09178940dace upstream.

We started disabling '-Warray-bounds' for gcc-12 originally on s390,
because it resulted in some warnings that weren't realistically fixable
(commit 8b202ee21839: "s390: disable -Warray-bounds").

That s390-specific issue was then found to be less common elsewhere, but
generic (see f0be87c42cbd: "gcc-12: disable '-Warray-bounds' universally
for now"), and then later expanded the version check was expanded to
gcc-11 (5a41237ad1d4: "gcc: disable -Warray-bounds for gcc-11 too").

And it turns out that I was much too optimistic in thinking that it's
all going to go away, and here we are with gcc-13 showing all the same
issues.  So instead of expanding this one version at a time, let's just
disable it for gcc-11+, and put an end limit to it only when we actually
find a solution.

Yes, I'm sure some of this is because the kernel just does odd things
(like our "container_of()" use, but also knowingly playing games with
things like linker tables and array layouts).

And yes, some of the warnings are likely signs of real bugs, but when
there are hundreds of false positives, that doesn't really help.

Oh well.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: Call inet6_destroy_sock() via sk->sk_destruct().

commit 6431b0f6ff1633ae598667e4cdd93830074a03e8 upstream.

After commit d38afeec26ed ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.

SCTP sets its own sk->sk_destruct() in the sctp_init_sock(), and
SCTPv6 socket reuses it as the init function.

To call inet6_sock_destruct() from SCTPv6 sk->sk_destruct(), we
set sctp_v6_destruct_sock() in a new init function.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp: Call inet6_destroy_sock() via sk->sk_destruct().

commit 1651951ebea54970e0bda60c638fc2eee7a6218f upstream.

After commit d38afeec26ed ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.

DCCP sets its own sk->sk_destruct() in the dccp_init_sock(), and
DCCPv6 socket shares it by calling the same init function via
dccp_v6_init_sock().

To call inet6_sock_destruct() from DCCPv6 sk->sk_destruct(), we
export it and set dccp_v6_sk_destruct() in the init function.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet6: Remove inet6_destroy_sock() in sk->sk_prot->destroy().

commit b5fc29233d28be7a3322848ebe73ac327559cdb9 upstream.

After commit d38afeec26ed ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.

Now we can remove unnecessary inet6_destroy_sock() calls in
sk->sk_prot->destroy().

DCCP and SCTP have their own sk->sk_destruct() function, so we
change them separately in the following patches.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

purgatory: fix disabling debug info

commit d83806c4c0cccc0d6d3c3581a11983a9c186a138 upstream.

Since 32ef9e5054ec, -Wa,-gdwarf-2 is no longer used in KBUILD_AFLAGS.
Instead, it includes -g, the appropriate -gdwarf-* flag, and also the
-Wa versions of both of those if building with Clang and GNU as.  As a
result, debug info was being generated for the purgatory objects, even
though the intention was that it not be.

Fixes: 32ef9e5054ec ("Makefile.debug: re-enable debug info for .S files")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Cc: stable@vger.kernel.org
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: always revalidate rename target dentry

commit ccc031e26afe60d2a5a3d93dabd9c978210825fb upstream.

The previous commit df8629af2934 ("fuse: always revalidate if exclusive
create") ensures that the dentries are revalidated on O_EXCL creates.  This
commit complements it by also performing revalidation for rename target
dentries.  Otherwise, a rename target file that only exists in kernel
dentry cache but not in the filesystem will result in EEXIST if
RENAME_NOREPLACE flag is used.

Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Signed-off-by: Zhang Tianci <zhangtianci.1997@bytedance.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Yang Bo <yb203166@antfin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Define RUNTIME_DISCARD_EXIT in LD script

commit 6dcbd0a69c84a8ae7a442840a8cf6b1379dc8f16 upstream.

MIPS's exit sections are discarded at runtime as well.

Fixes link error:
`.exit.text' referenced in section `__jump_table' of fs/fuse/inode.o:
defined in discarded section `.exit.text' of fs/fuse/inode.o

Fixes: 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>