KVM: x86: do not set st->preempted when going back to user space

[ Upstream commit 54aa83c90198e68eee8b0850c749bc70efb548da ]

Similar to the Xen path, only change the vCPU's reported state if the vCPU
was actually preempted.  The reason for KVM's behavior is that for example
optimistic spinning might not be a good idea if the guest is doing repeated
exits to userspace; however, it is confusing and unlikely to make a difference,
because well-tuned guests will hardly ever exit KVM_RUN in the first place.

Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86: do not report a vCPU as preempted outside instruction boundaries

[ Upstream commit 6cd88243c7e03845a450795e134b488fc2afb736 ]

If a vCPU is outside guest mode and is scheduled out, it might be in the
process of making a memory access.  A problem occurs if another vCPU uses
the PV TLB flush feature during the period when the vCPU is scheduled
out, and a virtual address has already been translated but has not yet
been accessed, because this is equivalent to using a stale TLB entry.

To avoid this, only report a vCPU as preempted if sure that the guest
is at an instruction boundary.  A rescheduling request will be delivered
to the host physical CPU as an external interrupt, so for simplicity
consider any vmexit *not* instruction boundary except for external
interrupts.

It would in principle be okay to report the vCPU as preempted also
if it is sleeping in kvm_vcpu_block(): a TLB flush IPI will incur the
vmentry/vmexit overhead unnecessarily, and optimistic spinning is
also unlikely to succeed.  However, leave it for later because right
now kvm_vcpu_check_block() is doing memory accesses.  Even
though the TLB flush issue only applies to virtual memory address,
it's very much preferrable to be conservative.

Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: arm64/poly1305 - fix a read out-of-bound

commit 7ae19d422c7da84b5f13bc08b98bd737a08d3a53 upstream.

A kasan error was reported during fuzzing:

BUG: KASAN: slab-out-of-bounds in neon_poly1305_blocks.constprop.0+0x1b4/0x250 [poly1305_neon]
Read of size 4 at addr ffff0010e293f010 by task syz-executor.5/1646715
CPU: 4 PID: 1646715 Comm: syz-executor.5 Kdump: loaded Not tainted 5.10.0.aarch64 #1
Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.59 01/31/2019
Call trace:
 dump_backtrace+0x0/0x394
 show_stack+0x34/0x4c arch/arm64/kernel/stacktrace.c:196
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x158/0x1e4 lib/dump_stack.c:118
 print_address_description.constprop.0+0x68/0x204 mm/kasan/report.c:387
 __kasan_report+0xe0/0x140 mm/kasan/report.c:547
 kasan_report+0x44/0xe0 mm/kasan/report.c:564
 check_memory_region_inline mm/kasan/generic.c:187 [inline]
 __asan_load4+0x94/0xd0 mm/kasan/generic.c:252
 neon_poly1305_blocks.constprop.0+0x1b4/0x250 [poly1305_neon]
 neon_poly1305_do_update+0x6c/0x15c [poly1305_neon]
 neon_poly1305_update+0x9c/0x1c4 [poly1305_neon]
 crypto_shash_update crypto/shash.c:131 [inline]
 shash_finup_unaligned+0x84/0x15c crypto/shash.c:179
 crypto_shash_finup+0x8c/0x140 crypto/shash.c:193
 shash_digest_unaligned+0xb8/0xe4 crypto/shash.c:201
 crypto_shash_digest+0xa4/0xfc crypto/shash.c:217
 crypto_shash_tfm_digest+0xb4/0x150 crypto/shash.c:229
 essiv_skcipher_setkey+0x164/0x200 [essiv]
 crypto_skcipher_setkey+0xb0/0x160 crypto/skcipher.c:612
 skcipher_setkey+0x3c/0x50 crypto/algif_skcipher.c:305
 alg_setkey+0x114/0x2a0 crypto/af_alg.c:220
 alg_setsockopt+0x19c/0x210 crypto/af_alg.c:253
 __sys_setsockopt+0x190/0x2e0 net/socket.c:2123
 __do_sys_setsockopt net/socket.c:2134 [inline]
 __se_sys_setsockopt net/socket.c:2131 [inline]
 __arm64_sys_setsockopt+0x78/0x94 net/socket.c:2131
 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline]
 invoke_syscall+0x64/0x100 arch/arm64/kernel/syscall.c:48
 el0_svc_common.constprop.0+0x220/0x230 arch/arm64/kernel/syscall.c:155
 do_el0_svc+0xb4/0xd4 arch/arm64/kernel/syscall.c:217
 el0_svc+0x24/0x3c arch/arm64/kernel/entry-common.c:353
 el0_sync_handler+0x160/0x164 arch/arm64/kernel/entry-common.c:369
 el0_sync+0x160/0x180 arch/arm64/kernel/entry.S:683

This error can be reproduced by the following code compiled as ko on a
system with kasan enabled:

#include <linux/module.h>
#include <linux/crypto.h>
#include <crypto/hash.h>
#include <crypto/poly1305.h>

char test_data[] = "\x00\x01\x02\x03\x04\x05\x06\x07"
                   "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f"
                   "\x10\x11\x12\x13\x14\x15\x16\x17"
                   "\x18\x19\x1a\x1b\x1c\x1d\x1e";

int init(void)
{
        struct crypto_shash *tfm = NULL;
        char *data = NULL, *out = NULL;

        tfm = crypto_alloc_shash("poly1305", 0, 0);
        data = kmalloc(POLY1305_KEY_SIZE - 1, GFP_KERNEL);
        out = kmalloc(POLY1305_DIGEST_SIZE, GFP_KERNEL);
        memcpy(data, test_data, POLY1305_KEY_SIZE - 1);
        crypto_shash_tfm_digest(tfm, data, POLY1305_KEY_SIZE - 1, out);

        kfree(data);
        kfree(out);
        return 0;
}

void deinit(void)
{
}

module_init(init)
module_exit(deinit)
MODULE_LICENSE("GPL");

The root cause of the bug sits in neon_poly1305_blocks. The logic
neon_poly1305_blocks() performed is that if it was called with both s[]
and r[] uninitialized, it will first try to initialize them with the
data from the first "block" that it believed to be 32 bytes in length.
First 16 bytes are used as the key and the next 16 bytes for s[]. This
would lead to the aforementioned read out-of-bound. However, after
calling poly1305_init_arch(), only 16 bytes were deducted from the input
and s[] is initialized yet again with the following 16 bytes. The second
initialization of s[] is certainly redundent which indicates that the
first initialization should be for r[] only.

This patch fixes the issue by calling poly1305_init_arm64() instead of
poly1305_init_arch(). This is also the implementation for the same
algorithm on arm platform.

Fixes: f569ca164751 ("crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation")
Cc: stable@vger.kernel.org
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: APEI: Better fix to avoid spamming the console with old error logs

commit c3481b6b75b4797657838f44028fd28226ab48e0 upstream.

The fix in commit 3f8dec116210 ("ACPI/APEI: Limit printable size of BERT
table data") does not work as intended on systems where the BIOS has a
fixed size block of memory for the BERT table, relying on s/w to quit
when it finds a record with estatus->block_status == 0. On these systems
all errors are suppressed because the check:

if (region_len < ACPI_BERT_PRINT_MAX_LEN)

always fails.

New scheme skips individual CPER records that are too large, and also
limits the total number of records that will be printed to 5.

Fixes: 3f8dec116210 ("ACPI/APEI: Limit printable size of BERT table data")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: video: Shortening quirk list by identifying Clevo by board_name only

commit f0341e67b3782603737f7788e71bd3530012a4f4 upstream.

Taking a recent change in the i8042 quirklist to this one: Clevo
board_names are somewhat unique, and if not: The generic Board_-/Sys_Vendor
string "Notebook" doesn't help much anyway. So identifying the devices just
by the board_name helps keeping the list significantly shorter and might
even hit more devices requiring the fix.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Fixes: c844d22fe0c0 ("ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU")
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: video: Force backlight native for some TongFang devices

commit c752089f7cf5b5800c6ace4cdd1a8351ee78a598 upstream.

The TongFang PF5PU1G, PF4NU1F, PF5NU1G, and PF5LUXG/TUXEDO BA15 Gen10,
Pulse 14/15 Gen1, and Pulse 15 Gen2 have the same problem as the Clevo
NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2:
They have a working native and video interface. However the default
detection mechanism first registers the video interface before
unregistering it again and switching to the native interface during boot.
This results in a dangling SBIOS request for backlight change for some
reason, causing the backlight to switch to ~2% once per boot on the first
power cord connect or disconnect event. Setting the native interface
explicitly circumvents this buggy behaviour by avoiding the unregistering
process.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/vm/slabinfo: Handle files in debugfs

commit 0c7e0d699ef1430d7f4cf12b4b1d097af58b5515 upstream.

Commit 64dd68497be76 relocated and renamed the alloc_calls and
free_calls files from /sys/kernel/slab/NAME/*_calls over to
/sys/kernel/debug/slab/NAME/*_calls but didn't update the slabinfo tool
with the new location.

This change will now have slabinfo look at the new location (and filenames)
with a fallback to the prior files.

Fixes: 64dd68497be76 ("mm: slub: move sysfs slab alloc/free interfaces to debugfs")
Cc: stable@vger.kernel.org
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Tested-by: Stéphane Graber <stgraber@ubuntu.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: fix default IO priority handling again

commit e589f46445960c274cc813a1cc8e2fc73b2a1849 upstream.

Commit e70344c05995 ("block: fix default IO priority handling")
introduced an inconsistency in get_current_ioprio() that tasks without
IO context return IOPRIO_DEFAULT priority while tasks with freshly
allocated IO context will return 0 (IOPRIO_CLASS_NONE/0) IO priority.
Tasks without IO context used to be rare before 5a9d041ba2f6 ("block:
move io_context creation into where it's needed") but after this commit
they became common because now only BFQ IO scheduler setups task's IO
context. Similar inconsistency is there for get_task_ioprio() so this
inconsistency is now exposed to userspace and userspace will see
different IO priority for tasks operating on devices with BFQ compared
to devices without BFQ. Furthemore the changes done by commit
e70344c05995 change the behavior when no IO priority is set for BFQ IO
scheduler which is also documented in ioprio_set(2) manpage:

"If no I/O scheduler has been set for a thread, then by default the I/O
priority will follow the CPU nice value (setpriority(2)).  In Linux
kernels before version 2.6.24, once an I/O priority had been set using
ioprio_set(), there was no way to reset the I/O scheduling behavior to
the default. Since Linux 2.6.24, specifying ioprio as 0 can be used to
reset to the default I/O scheduling behavior."

So make sure we default to IOPRIO_CLASS_NONE as used to be the case
before commit e70344c05995. Also cleanup alloc_io_context() to
explicitely set this IO priority for the allocated IO context to avoid
future surprises. Note that we tweak ioprio_best() to maintain
ioprio_get(2) behavior and make this commit easily backportable.

CC: stable@vger.kernel.org
Fixes: e70344c05995 ("block: fix default IO priority handling")
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220623074840.5960-1-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: Check dst_port only on the client socket

commit 2d2202ba858c112b03f84d546e260c61425831a1 upstream.

cgroup_skb/egress programs which sock_fields test installs process packets
flying in both directions, from the client to the server, and in reverse
direction.

Recently added dst_port check relies on the fact that destination
port (remote peer port) of the socket which sends the packet is known ahead
of time. This holds true only for the client socket, which connects to the
known server port.

Filter out any traffic that is not egressing from the client socket in the
BPF program that tests reading the dst_port.

Fixes: 8f50f16ff39d ("selftests/bpf: Extend verifier and bpf_sock tests for dst_port loads")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-3-jakub@cloudflare.com
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: Extend verifier and bpf_sock tests for dst_port loads

commit 8f50f16ff39dd4e2d43d1548ca66925652f8aff7 upstream.

Add coverage to the verifier tests and tests for reading bpf_sock fields to
ensure that 32-bit, 16-bit, and 8-bit loads from dst_port field are allowed
only at intended offsets and produce expected values.

While 16-bit and 8-bit access to dst_port field is straight-forward, 32-bit
wide loads need be allowed and produce a zero-padded 16-bit value for
backward compatibility.

Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20220130115518.213259-3-jakub@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Make all RETbleed mitigations 64-bit only

commit b648ab487f31bc4c38941bc770ea97fe394304bb upstream.

The mitigations for RETBleed are currently ineffective on x86_32 since
entry_32.S does not use the required macros.  However, for an x86_32
target, the kconfig symbols for them are still enabled by default and
/sys/devices/system/cpu/vulnerabilities/retbleed will wrongly report
that mitigations are in place.

Make all of these symbols depend on X86_64, and only enable RETHUNK by
default on X86_64.

Fixes: f43b9876e857 ("x86/retbleed: Add fine grained Kconfig knobs")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YtwSR3NNsWp1ohfV@decadent.org.uk
[bwh: Backported to 5.10/5.15/5.18: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.59

Link: https://lore.kernel.org/r/20220801114134.468284027@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/bugs: Do not enable IBPB at firmware entry when IBPB is not available

commit 571c30b1a88465a1c85a6f7762609939b9085a15 upstream.

Some cloud hypervisors do not provide IBPB on very recent CPU processors,
including AMD processors affected by Retbleed.

Using IBPB before firmware calls on such systems would cause a GPF at boot
like the one below. Do not enable such calls when IBPB support is not
present.

  EFI Variables Facility v0.08 2004-May-17
  general protection fault, maybe for address 0x1: 0000 [#1] PREEMPT SMP NOPTI
  CPU: 0 PID: 24 Comm: kworker/u2:1 Not tainted 5.19.0-rc8+ #7
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
  Workqueue: efi_rts_wq efi_call_rts
  RIP: 0010:efi_call_rts
  Code: e8 37 33 58 ff 41 bf 48 00 00 00 49 89 c0 44 89 f9 48 83 c8 01 4c 89 c2 48 c1 ea 20 66 90 b9 49 00 00 00 b8 01 00 00 00 31 d2 <0f> 30 e8 7b 9f 5d ff e8 f6 f8 ff ff 4c 89 f1 4c 89 ea 4c 89 e6 48
  RSP: 0018:ffffb373800d7e38 EFLAGS: 00010246
  RAX: 0000000000000001 RBX: 0000000000000006 RCX: 0000000000000049
  RDX: 0000000000000000 RSI: ffff94fbc19d8fe0 RDI: ffff94fbc1b2b300
  RBP: ffffb373800d7e70 R08: 0000000000000000 R09: 0000000000000000
  R10: 000000000000000b R11: 000000000000000b R12: ffffb3738001fd78
  R13: ffff94fbc2fcfc00 R14: ffffb3738001fd80 R15: 0000000000000048
  FS:  0000000000000000(0000) GS:ffff94fc3da00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffff94fc30201000 CR3: 000000006f610000 CR4: 00000000000406f0
  Call Trace:
   <TASK>
   ? __wake_up
   process_one_work
   worker_thread
   ? rescuer_thread
   kthread
   ? kthread_complete_and_exit
   ret_from_fork
   </TASK>
  Modules linked in:

Fixes: 28a99e95f55c ("x86/amd: Use IBPB for firmware calls")
Reported-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220728122602.2500509-1-cascardo@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

locking/rwsem: Allow slowpath writer to ignore handoff bit if not set by first waiter

commit 6eebd5fb20838f5971ba17df9f55cc4f84a31053 upstream.

With commit d257cc8cb8d5 ("locking/rwsem: Make handoff bit handling more
consistent"), the writer that sets the handoff bit can be interrupted
out without clearing the bit if the wait queue isn't empty. This disables
reader and writer optimistic lock spinning and stealing.

Now if a non-first writer in the queue is somehow woken up or a new
waiter enters the slowpath, it can't acquire the lock.  This is not the
case before commit d257cc8cb8d5 as the writer that set the handoff bit
will clear it when exiting out via the out_nolock path. This is less
efficient as the busy rwsem stays in an unlock state for a longer time.

In some cases, this new behavior may cause lockups as shown in [1] and
[2].

This patch allows a non-first writer to ignore the handoff bit if it
is not originally set or initiated by the first waiter. This patch is
shown to be effective in fixing the lockup problem reported in [1].

[1] https://lore.kernel.org/lkml/20220617134325.GC30825@techsingularity.net/
[2] https://lore.kernel.org/lkml/3f02975c-1a9d-be20-32cf-f1d8e3dfafcc@oracle.com/

Fixes: d257cc8cb8d5 ("locking/rwsem: Make handoff bit handling more consistent")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20220622200419.778799-1-longman@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

docs/kernel-parameters: Update descriptions for "mitigations=" param with retbleed

commit ea304a8b89fd0d6cf94ee30cb139dc23d9f1a62f upstream.

Updates descriptions for "mitigations=off" and "mitigations=auto,nosmt"
with the respective retbleed= settings.

Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: corbet@lwn.net
Link: https://lore.kernel.org/r/20220728043907.165688-1-eiichi.tsukata@nutanix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC/ghes: Set the DIMM label unconditionally

commit 5e2805d5379619c4a2e3ae4994e73b36439f4bad upstream.

The commit

  cb51a371d08e ("EDAC/ghes: Setup DIMM label from DMI and use it in error reports")

enforced that both the bank and device strings passed to
dimm_setup_label() are not NULL.

However, there are BIOSes, for example on a

  HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 03/15/2019

which don't populate both strings:

  Handle 0x0020, DMI type 17, 84 bytes
  Memory Device
          Array Handle: 0x0013
          Error Information Handle: Not Provided
          Total Width: 72 bits
          Data Width: 64 bits
          Size: 32 GB
          Form Factor: DIMM
          Set: None
          Locator: PROC 1 DIMM 1        <===== device
          Bank Locator: Not Specified   <===== bank

This results in a buffer overflow because ghes_edac_register() calls
strlen() on an uninitialized label, which had non-zero values left over
from krealloc_array():

  detected buffer overflow in __fortify_strlen
   ------------[ cut here ]------------
   kernel BUG at lib/string_helpers.c:983!
   invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
   CPU: 1 PID: 1 Comm: swapper/0 Tainted: G          I       5.18.6-200.fc36.x86_64 #1
   Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 03/15/2019
   RIP: 0010:fortify_panic
   ...
   Call Trace:
    <TASK>
    ghes_edac_register.cold
    ghes_probe
    platform_probe
    really_probe
    __driver_probe_device
    driver_probe_device
    __driver_attach
    ? __device_attach_driver
    bus_for_each_dev
    bus_add_driver
    driver_register
    acpi_ghes_init
    acpi_init
    ? acpi_sleep_proc_init
    do_one_initcall

The label contains garbage because the commit in Fixes reallocs the
DIMMs array while scanning the system but doesn't clear the newly
allocated memory.

Change dimm_setup_label() to always initialize the label to fix the
issue. Set it to the empty string in case BIOS does not provide both
bank and device so that ghes_edac_register() can keep the default label
given by edac_mc_alloc_dimms().

  [ bp: Rewrite commit message. ]

Fixes: b9cae27728d1f ("EDAC/ghes: Scan the system once on driver init")
Co-developed-by: Robert Richter <rric@kernel.org>
Signed-off-by: Robert Richter <rric@kernel.org>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Robert Elliott <elliott@hpe.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220719220124.760359-1-toshi.kani@hpe.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 9216/1: Fix MAX_DMA_ADDRESS overflow

[ Upstream commit fb0fd3469ead5b937293c213daa1f589b4b7ce46 ]

Commit 26f09e9b3a06 ("mm/memblock: add memblock memory allocation apis")
added a check to determine whether arm_dma_zone_size is exceeding the
amount of kernel virtual address space available between the upper 4GB
virtual address limit and PAGE_OFFSET in order to provide a suitable
definition of MAX_DMA_ADDRESS that should fit within the 32-bit virtual
address space. The quantity used for comparison was off by a missing
trailing 0, leading to MAX_DMA_ADDRESS to be overflowing a 32-bit
quantity.

This was caught thanks to CONFIG_DEBUG_VIRTUAL on the bcm2711 platform
where we define a dma_zone_size of 1GB and we have a PAGE_OFFSET value
of 0xc000_0000 (CONFIG_VMSPLIT_3G) leading to MAX_DMA_ADDRESS being
0x1_0000_0000 which overflows the unsigned long type used throughout
__pa() and then __virt_addr_valid(). Because the virtual address passed
to __virt_addr_valid() would now be 0, the function would loudly warn
and flood the kernel log, thus making the platform unable to boot
properly.

Fixes: 26f09e9b3a06 ("mm/memblock: add memblock memory allocation apis")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

page_alloc: fix invalid watermark check on a negative value

commit 9282012fc0aa248b77a69f5eb802b67c5a16bb13 upstream.

There was a report that a task is waiting at the
throttle_direct_reclaim. The pgscan_direct_throttle in vmstat was
increasing.

This is a bug where zone_watermark_fast returns true even when the free
is very low. The commit f27ce0e14088 ("page_alloc: consider highatomic
reserve in watermark fast") changed the watermark fast to consider
highatomic reserve. But it did not handle a negative value case which
can be happened when reserved_highatomic pageblock is bigger than the
actual free.

If watermark is considered as ok for the negative value, allocating
contexts for order-0 will consume all free pages without direct reclaim,
and finally free page may become depleted except highatomic free.

Then allocating contexts may fall into throttle_direct_reclaim. This
symptom may easily happen in a system where wmark min is low and other
reclaimers like kswapd does not make free pages quickly.

Handle the negative case by using MIN.

Link: https://lkml.kernel.org/r/20220725095212.25388-1-jaewon31.kim@samsung.com
Fixes: f27ce0e14088 ("page_alloc: consider highatomic reserve in watermark fast")
Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Reported-by: GyeongHwan Hong <gh21.hong@samsung.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yong-Taek Lee <ytk.lee@samsung.com>
Cc: <stable@vger.kerenl.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hmm: fault non-owner device private entries

commit 8a295dbbaf7292c582a40ce469c326f472d51f66 upstream.

If hmm_range_fault() is called with the HMM_PFN_REQ_FAULT flag and a
device private PTE is found, the hmm_range::dev_private_owner page is used
to determine if the device private page should not be faulted in.
However, if the device private page is not owned by the caller,
hmm_range_fault() returns an error instead of calling migrate_to_ram() to
fault in the page.

For example, if a page is migrated to GPU private memory and a RDMA fault
capable NIC tries to read the migrated page, without this patch it will
get an error.  With this patch, the page will be migrated back to system
memory and the NIC will be able to read the data.

Link: https://lkml.kernel.org/r/20220727000837.4128709-2-rcampbell@nvidia.com
Link: https://lkml.kernel.org/r/20220725183615.4118795-2-rcampbell@nvidia.com
Fixes: 08ddddda667b ("mm/hmm: check the device private page owner in hmm_range_fault()")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reported-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Philip Yang <Philip.Yang@amd.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: crypto: comment out gcc warning that breaks clang builds

The gcc build warning prevents all clang-built kernels from working
properly, so comment it out to fix the build.

This is a -stable kernel only patch for now, it will be resolved
differently in mainline releases in the future.

Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: "Justin M. Forbes" <jforbes@fedoraproject.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: leave the err path free in sctp_stream_init to sctp_stream_free

[ Upstream commit 181d8d2066c000ba0a0e6940a7ad80f1a0e68e9d ]

A NULL pointer dereference was reported by Wei Chen:

  BUG: kernel NULL pointer dereference, address: 0000000000000000
  RIP: 0010:__list_del_entry_valid+0x26/0x80
  Call Trace:
   <TASK>
   sctp_sched_dequeue_common+0x1c/0x90
   sctp_sched_prio_dequeue+0x67/0x80
   __sctp_outq_teardown+0x299/0x380
   sctp_outq_free+0x15/0x20
   sctp_association_free+0xc3/0x440
   sctp_do_sm+0x1ca7/0x2210
   sctp_assoc_bh_rcv+0x1f6/0x340

This happens when calling sctp_sendmsg without connecting to server first.
In this case, a data chunk already queues up in send queue of client side
when processing the INIT_ACK from server in sctp_process_init() where it
calls sctp_stream_init() to alloc stream_in. If it fails to alloc stream_in
all stream_out will be freed in sctp_stream_init's err path. Then in the
asoc freeing it will crash when dequeuing this data chunk as stream_out
is missing.

As we can't free stream out before dequeuing all data from send queue, and
this patch is to fix it by moving the err path stream_out/in freeing in
sctp_stream_init() to sctp_stream_free() which is eventually called when
freeing the asoc in sctp_association_free(). This fix also makes the code
in sctp_process_init() more clear.

Note that in sctp_association_init() when it fails in sctp_stream_init(),
sctp_association_free() will not be called, and in that case it should
go to 'stream_free' err path to free stream instead of 'fail_init'.

Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/831a3dc100c4908ff76e5bcc363be97f2778bc0b.1658787066.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sfc: disable softirqs for ptp TX

[ Upstream commit 67c3b611d92fc238c43734878bc3e232ab570c79 ]

Sending a PTP packet can imply to use the normal TX driver datapath but
invoked from the driver's ptp worker. The kernel generic TX code
disables softirqs and preemption before calling specific driver TX code,
but the ptp worker does not. Although current ptp driver functionality
does not require it, there are several reasons for doing so:

   1) The invoked code is always executed with softirqs disabled for non
      PTP packets.
   2) Better if a ptp packet transmission is not interrupted by softirq
      handling which could lead to high latencies.
   3) netdev_xmit_more used by the TX code requires preemption to be
      disabled.

Indeed a solution for dealing with kernel preemption state based on static
kernel configuration is not possible since the introduction of dynamic
preemption level configuration at boot time using the static calls
functionality.

Fixes: f79c957a0b537 ("drivers: net: sfc: use netdev_xmit_more helper")
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Link: https://lore.kernel.org/r/20220726064504.49613-1-alejandro.lucero-palau@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf symbol: Correct address for bss symbols

[ Upstream commit 2d86612aacb7805f72873691a2644d7279ed0630 ]

When using 'perf mem' and 'perf c2c', an issue is observed that tool
reports the wrong offset for global data symbols.  This is a common
issue on both x86 and Arm64 platforms.

Let's see an example, for a test program, below is the disassembly for
its .bss section which is dumped with objdump:

  ...

  Disassembly of section .bss:

  0000000000004040 <completed.0>:
   ...

  0000000000004080 <buf1>:
   ...

  00000000000040c0 <buf2>:
   ...

  0000000000004100 <thread>:
   ...

First we used 'perf mem record' to run the test program and then used
'perf --debug verbose=4 mem report' to observe what's the symbol info
for 'buf1' and 'buf2' structures.

  # ./perf mem record -e ldlat-loads,ldlat-stores -- false_sharing.exe 8
  # ./perf --debug verbose=4 mem report
    ...
    dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 sh_addr: 0x4040 sh_offset: 0x3028
    symbol__new: buf2 0x30a8-0x30e8
    ...
    dso__load_sym_internal: adjusting symbol: st_value: 0x4080 sh_addr: 0x4040 sh_offset: 0x3028
    symbol__new: buf1 0x3068-0x30a8
    ...

The perf tool relies on libelf to parse symbols, in executable and
shared object files, 'st_value' holds a virtual address; 'sh_addr' is
the address at which section's first byte should reside in memory, and
'sh_offset' is the byte offset from the beginning of the file to the
first byte in the section.  The perf tool uses below formula to convert
a symbol's memory address to a file address:

  file_address = st_value - sh_addr + sh_offset
                    ^
                    ` Memory address

We can see the final adjusted address ranges for buf1 and buf2 are
[0x30a8-0x30e8) and [0x3068-0x30a8) respectively, apparently this is
incorrect, in the code, the structure for 'buf1' and 'buf2' specifies
compiler attribute with 64-byte alignment.

The problem happens for 'sh_offset', libelf returns it as 0x3028 which
is not 64-byte aligned, combining with disassembly, it's likely libelf
doesn't respect the alignment for .bss section, therefore, it doesn't
return the aligned value for 'sh_offset'.

Suggested by Fangrui Song, ELF file contains program header which
contains PT_LOAD segments, the fields p_vaddr and p_offset in PT_LOAD
segments contain the execution info.  A better choice for converting
memory address to file address is using the formula:

  file_address = st_value - p_vaddr + p_offset

This patch introduces elf_read_program_header() which returns the
program header based on the passed 'st_value', then it uses the formula
above to calculate the symbol file address; and the debugging log is
updated respectively.

After applying the change:

  # ./perf --debug verbose=4 mem report
    ...
    dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 p_vaddr: 0x3d28 p_offset: 0x2d28
    symbol__new: buf2 0x30c0-0x3100
    ...
    dso__load_sym_internal: adjusting symbol: st_value: 0x4080 p_vaddr: 0x3d28 p_offset: 0x2d28
    symbol__new: buf1 0x3080-0x30c0
    ...

Fixes: f17e04afaff84b5c ("perf report: Fix ELF symbol parsing")
Reported-by: Chang Rui <changruinj@gmail.com>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220724060013.171050-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio-net: fix the race between refill work and close

[ Upstream commit 5a159128faff151b7fe5f4eb0f310b1e0a2d56bf ]

We try using cancel_delayed_work_sync() to prevent the work from
enabling NAPI. This is insufficient since we don't disable the source
of the refill work scheduling. This means an NAPI poll callback after
cancel_delayed_work_sync() can schedule the refill work then can
re-enable the NAPI that leads to use-after-free [1].

Since the work can enable NAPI, we can't simply disable NAPI before
calling cancel_delayed_work_sync(). So fix this by introducing a
dedicated boolean to control whether or not the work could be
scheduled from NAPI.

[1]
==================================================================
BUG: KASAN: use-after-free in refill_work+0x43/0xd4
Read of size 2 at addr ffff88810562c92e by task kworker/2:1/42

CPU: 2 PID: 42 Comm: kworker/2:1 Not tainted 5.19.0-rc1+ #480
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: events refill_work
Call Trace:
 <TASK>
 dump_stack_lvl+0x34/0x44
 print_report.cold+0xbb/0x6ac
 ? _printk+0xad/0xde
 ? refill_work+0x43/0xd4
 kasan_report+0xa8/0x130
 ? refill_work+0x43/0xd4
 refill_work+0x43/0xd4
 process_one_work+0x43d/0x780
 worker_thread+0x2a0/0x6f0
 ? process_one_work+0x780/0x780
 kthread+0x167/0x1a0
 ? kthread_exit+0x50/0x50
 ret_from_fork+0x22/0x30
 </TASK>
...

Fixes: b2baed69e605c ("virtio_net: set/cancel work on ndo_open/ndo_stop")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_queue: do not allow packet truncation below transport header offset

[ Upstream commit 99a63d36cb3ed5ca3aa6fcb64cffbeaf3b0fb164 ]

Domingo Dirutigliano and Nicola Guerrera report kernel panic when
sending nf_queue verdict with 1-byte nfta_payload attribute.

The IP/IPv6 stack pulls the IP(v6) header from the packet after the
input hook.

If user truncates the packet below the header size, this skb_pull() will
result in a malformed skb (skb->len < 0).

Fixes: 7af4cc3fa158 ("[NETFILTER]: Add "nfnetlink_queue" netfilter queue handler over nfnetlink")
Reported-by: Domingo Dirutigliano <pwnzer0tt1@proton.me>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-pf: cn10k: Fix egress ratelimit configuration

[ Upstream commit b354eaeec8637d87003945439209251d76a2bb95 ]

NIX_AF_TLXX_PIR/CIR register format has changed from OcteonTx2
to CN10K. CN10K supports larger burst size. Fix burst exponent
and burst mantissa configuration for CN10K.

Also fixed 'maxrate' from u32 to u64 since 'police.rate_bytes_ps'
passed by stack is also u64.

Fixes: e638a83f167e ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: fix sleep in atomic context bug in timer handlers

[ Upstream commit b89fc26f741d9f9efb51cba3e9b241cf1380ec5a ]

There are sleep in atomic context bugs in timer handlers of sctp
such as sctp_generate_t3_rtx_event(), sctp_generate_probe_event(),
sctp_generate_t1_init_event(), sctp_generate_timeout_event(),
sctp_generate_t3_rtx_event() and so on.

The root cause is sctp_sched_prio_init_sid() with GFP_KERNEL parameter
that may sleep could be called by different timer handlers which is in
interrupt context.

One of the call paths that could trigger bug is shown below:

      (interrupt context)
sctp_generate_probe_event
  sctp_do_sm
    sctp_side_effects
      sctp_cmd_interpreter
        sctp_outq_teardown
          sctp_outq_init
            sctp_sched_set_sched
              n->init_sid(..,GFP_KERNEL)
                sctp_sched_prio_init_sid //may sleep

This patch changes gfp_t parameter of init_sid in sctp_sched_set_sched()
from GFP_KERNEL to GFP_ATOMIC in order to prevent sleep in atomic
context bugs.

Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/20220723015809.11553-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix interface init with MSI interrupts (no MSI-X)

[ Upstream commit 5fcbb711024aac6d4db385623e6f2fdf019f7782 ]

Fix the inability to bring an interface up on a setup with
only MSI interrupts enabled (no MSI-X).
Solution is to add a default number of QPs = 1. This is enough,
since without MSI-X support driver enables only a basic feature set.

Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use")
Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220722175401.112572-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv4: Fix data-races around sysctl_fib_notify_on_flag_change.

[ Upstream commit 96b9bd8c6d125490f9adfb57d387ef81a55a103e ]

While reading sysctl_fib_notify_on_flag_change, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its readers.

Fixes: 680aea08e78c ("net: ipv4: Emit notification when fib hardware flags are changed")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: Fix data-races around sysctl_tcp_reflect_tos.

[ Upstream commit 870e3a634b6a6cb1543b359007aca73fe6a03ac5 ]

While reading sysctl_tcp_reflect_tos, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: ac8f1710c12b ("tcp: reflect tos value received in SYN to the socket")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: Fix a data-race around sysctl_tcp_comp_sack_nr.

[ Upstream commit 79f55473bfc8ac51bd6572929a679eeb4da22251 ]

While reading sysctl_tcp_comp_sack_nr, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 9c21d2fc41c0 ("tcp: add tcp_comp_sack_nr sysctl")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: Fix a data-race around sysctl_tcp_comp_sack_slack_ns.

[ Upstream commit 22396941a7f343d704738360f9ef0e6576489d43 ]

While reading sysctl_tcp_comp_sack_slack_ns, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its reader.

Fixes: a70437cc09a1 ("tcp: add hrtimer slack to sack compression")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: Fix a data-race around sysctl_tcp_comp_sack_delay_ns.

[ Upstream commit 4866b2b0f7672b6d760c4b8ece6fb56f965dcc8a ]

While reading sysctl_tcp_comp_sack_delay_ns, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its reader.

Fixes: 6d82aa242092 ("tcp: add tcp_comp_sack_delay_ns sysctl")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Fix data-races around sysctl_[rw]mem(_offset)?.

[ Upstream commit 02739545951ad4c1215160db7fbf9b7a918d3c0b ]

While reading these sysctl variables, they can be changed concurrently.
Thus, we need to add READ_ONCE() to their readers.

  - .sysctl_rmem
  - .sysctl_rwmem
  - .sysctl_rmem_offset
  - .sysctl_wmem_offset
  - sysctl_tcp_rmem[1, 2]
  - sysctl_tcp_wmem[1, 2]
  - sysctl_decnet_rmem[1]
  - sysctl_decnet_wmem[1]
  - sysctl_tipc_rmem[1]

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: Fix data-races around sk_pacing_rate.

[ Upstream commit 59bf6c65a09fff74215517aecffbbdcd67df76e3 ]

While reading sysctl_tcp_pacing_(ss|ca)_ratio, they can be changed
concurrently.  Thus, we need to add READ_ONCE() to their readers.

Fixes: 43e122b014c9 ("tcp: refine pacing rate determination")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mld: fix reference count leak in mld_{query | report}_work()

[ Upstream commit 3e7d18b9dca388940a19cae30bfc1f76dccd8c28 ]

mld_{query | report}_work() processes queued events.
If there are too many events in the queue, it re-queue a work.
And then, it returns without in6_dev_put().
But if queuing is failed, it should call in6_dev_put(), but it doesn't.
So, a reference count leak would occur.

THREAD0 THREAD1
mld_report_work()
spin_lock_bh()
if (!mod_delayed_work())
in6_dev_hold();
spin_unlock_bh()
spin_lock_bh()
schedule_delayed_work()
spin_unlock_bh()

Script to reproduce(by Hangbin Liu):
   ip netns add ns1
   ip netns add ns2
   ip netns exec ns1 sysctl -w net.ipv6.conf.all.force_mld_version=1
   ip netns exec ns2 sysctl -w net.ipv6.conf.all.force_mld_version=1

   ip -n ns1 link add veth0 type veth peer name veth0 netns ns2
   ip -n ns1 link set veth0 up
   ip -n ns2 link set veth0 up

   for i in `seq 50`; do
           for j in `seq 100`; do
                   ip -n ns1 addr add 2021:${i}::${j}/64 dev veth0
                   ip -n ns2 addr add 2022:${i}::${j}/64 dev veth0
           done
   done
   modprobe -r veth
   ip -a netns del

splat looks like:
 unregister_netdevice: waiting for veth0 to become free. Usage count = 2
 leaked reference.
  ipv6_add_dev+0x324/0xec0
  addrconf_notify+0x481/0xd10
  raw_notifier_call_chain+0xe3/0x120
  call_netdevice_notifiers+0x106/0x160
  register_netdevice+0x114c/0x16b0
  veth_newlink+0x48b/0xa50 [veth]
  rtnl_newlink+0x11a2/0x1a40
  rtnetlink_rcv_msg+0x63f/0xc00
  netlink_rcv_skb+0x1df/0x3e0
  netlink_unicast+0x5de/0x850
  netlink_sendmsg+0x6c9/0xa90
  ____sys_sendmsg+0x76a/0x780
  __sys_sendmsg+0x27c/0x340
  do_syscall_64+0x43/0x90
  entry_SYSCALL_64_after_hwframe+0x63/0xcd

Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: f185de28d9ae ("mld: add new workqueues for process mld events")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: macsec: fix potential resource leak in macsec_add_rxsa() and macsec_add_txsa()

[ Upstream commit c7b205fbbf3cffa374721bb7623f7aa8c46074f1 ]

init_rx_sa() allocates relevant resource for rx_sa->stats and rx_sa->
key.tfm with alloc_percpu() and macsec_alloc_tfm(). When some error
occurs after init_rx_sa() is called in macsec_add_rxsa(), the function
released rx_sa with kfree() without releasing rx_sa->stats and rx_sa->
key.tfm, which will lead to a resource leak.

We should call macsec_rxsa_put() instead of kfree() to decrease the ref
count of rx_sa and release the relevant resource if the refcount is 0.
The same bug exists in macsec_add_txsa() for tx_sa as well. This patch
fixes the above two bugs.

Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

macsec: always read MACSEC_SA_ATTR_PN as a u64

[ Upstream commit c630d1fe6219769049c87d1a6a0e9a6de55328a1 ]

Currently, MACSEC_SA_ATTR_PN is handled inconsistently, sometimes as a
u32, sometimes forced into a u64 without checking the actual length of
the attribute. Instead, we can use nla_get_u64 everywhere, which will
read up to 64 bits into a u64, capped by the actual length of the
attribute coming from userspace.

This fixes several issues:
 - the check in validate_add_rxsa doesn't work with 32-bit attributes
 - the checks in validate_add_txsa and validate_upd_sa incorrectly
   reject X << 32 (with X != 0)

Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

macsec: limit replay window size with XPN

[ Upstream commit b07a0e2044057f201d694ab474f5c42a02b6465b ]

IEEE 802.1AEbw-2013 (section 10.7.8) specifies that the maximum value
of the replay window is 2^30-1, to help with recovery of the upper
bits of the PN.

To avoid leaving the existing macsec device in an inconsistent state
if this test fails during changelink, reuse the cleanup mechanism
introduced for HW offload. This wasn't needed until now because
macsec_changelink_common could not fail during changelink, as
modifying the cipher suite was not allowed.

Finally, this must happen after handling IFLA_MACSEC_CIPHER_SUITE so
that secy->xpn is set.

Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

macsec: fix error message in macsec_add_rxsa and _txsa

[ Upstream commit 3240eac4ff20e51b87600dbd586ed814daf313db ]

The expected length is MACSEC_SALT_LEN, not MACSEC_SA_ATTR_SALT.

Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

macsec: fix NULL deref in macsec_add_rxsa

[ Upstream commit f46040eeaf2e523a4096199fd93a11e794818009 ]

Commit 48ef50fa866a added a test on tb_sa[MACSEC_SA_ATTR_PN], but
nothing guarantees that it's not NULL at this point. The same code was
added to macsec_add_txsa, but there it's not a problem because
validate_add_txsa checks that the MACSEC_SA_ATTR_PN attribute is
present.

Note: it's not possible to reproduce with iproute, because iproute
doesn't allow creating an SA without specifying the PN.

Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208315
Reported-by: Frantisek Sumsal <fsumsal@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Documentation: fix sctp_wmem in ip-sysctl.rst

[ Upstream commit aa709da0e032cee7c202047ecd75f437bb0126ed ]

Since commit 1033990ac5b2 ("sctp: implement memory accounting on tx path"),
SCTP has supported memory accounting on tx path where 'sctp_wmem' is used
by sk_wmem_schedule(). So we should fix the description for this option in
ip-sysctl.rst accordingly.

v1->v2:
  - Improve the description as Marcelo suggested.

Fixes: 1033990ac5b2 ("sctp: implement memory accounting on tx path")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: Fix a data-race around sysctl_tcp_invalid_ratelimit.

[ Upstream commit 2afdbe7b8de84c28e219073a6661080e1b3ded48 ]

While reading sysctl_tcp_invalid_ratelimit, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its reader.

Fixes: 032ee4236954 ("tcp: helpers to mitigate ACK loops by rate-limiting out-of-window dupacks")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: Fix a data-race around sysctl_tcp_autocorking.

[ Upstream commit 85225e6f0a76e6745bc841c9f25169c509b573d8 ]

While reading sysctl_tcp_autocorking, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: f54b311142a9 ("tcp: auto corking")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: Fix a data-race around sysctl_tcp_min_rtt_wlen.

[ Upstream commit 1330ffacd05fc9ac4159d19286ce119e22450ed2 ]

While reading sysctl_tcp_min_rtt_wlen, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: f672258391b4 ("tcp: track min RTT using windowed min-filter")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: Fix a data-race around sysctl_tcp_min_tso_segs.

[ Upstream commit e0bb4ab9dfddd872622239f49fb2bd403b70853b ]

While reading sysctl_tcp_min_tso_segs, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 95bd09eb2750 ("tcp: TSO packets automatic sizing")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sungem_phy: Add of_node_put() for reference returned by of_get_parent()

[ Upstream commit ebbbe23fdf6070e31509638df3321688358cc211 ]

In bcm5421_init(), we should call of_node_put() for the reference
returned by of_get_parent() which has increased the refcount.

Fixes: 3c326fe9cb7a ("[PATCH] ppc64: Add new PHY to sungem")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220720131003.1287426-1-windhl@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: pcs: xpcs: propagate xpcs_read error to xpcs_get_state_c37_sgmii

[ Upstream commit 27161db0904ee48e59140aa8d0835939a666c1f1 ]

While phylink_pcs_ops :: pcs_get_state does return void, xpcs_get_state()
does check for a non-zero return code from xpcs_get_state_c37_sgmii()
and prints that as a message to the kernel log.

However, a non-zero return code from xpcs_read() is translated into
"return false" (i.e. zero as int) and the I/O error is therefore not
printed. Fix that.

Fixes: b97b5331b8ab ("net: pcs: add C37 SGMII AN support for intel mGbE controller")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220720112057.3504398-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igmp: Fix data-races around sysctl_igmp_qrv.

[ Upstream commit 8ebcc62c738f68688ee7c6fec2efe5bc6d3d7e60 ]

While reading sysctl_igmp_qrv, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

This test can be packed into a helper, so such changes will be in the
follow-up series after net is merged into net-next.

  qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv);

Fixes: a9fe8e29945d ("ipv4: implement igmp_qrv sysctl to tune igmp robustness variable")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/tls: Remove the context from the list in tls_device_down

commit f6336724a4d4220c89a4ec38bca84b03b178b1a3 upstream.

tls_device_down takes a reference on all contexts it's going to move to
the degraded state (software fallback). If sk_destruct runs afterwards,
it can reduce the reference counter back to 1 and return early without
destroying the context. Then tls_device_down will release the reference
it took and call tls_device_free_ctx. However, the context will still
stay in tls_device_down_list forever. The list will contain an item,
memory for which is released, making a memory corruption possible.

Fix the above bug by properly removing the context from all lists before
any call to tls_device_free_ctx.

Fixes: 3740651bf7e2 ("tls: Fix context leak on tls_device_down")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6/addrconf: fix a null-ptr-deref bug for ip6_ptr

commit 85f0173df35e5462d89947135a6a5599c6c3ef6f upstream.

Change net device's MTU to smaller than IPV6_MIN_MTU or unregister
device while matching route. That may trigger null-ptr-deref bug
for ip6_ptr probability as following.

=========================================================
BUG: KASAN: null-ptr-deref in find_match.part.0+0x70/0x134
Read of size 4 at addr 0000000000000308 by task ping6/263

CPU: 2 PID: 263 Comm: ping6 Not tainted 5.19.0-rc7+ #14
Call trace:
 dump_backtrace+0x1a8/0x230
 show_stack+0x20/0x70
 dump_stack_lvl+0x68/0x84
 print_report+0xc4/0x120
 kasan_report+0x84/0x120
 __asan_load4+0x94/0xd0
 find_match.part.0+0x70/0x134
 __find_rr_leaf+0x408/0x470
 fib6_table_lookup+0x264/0x540
 ip6_pol_route+0xf4/0x260
 ip6_pol_route_output+0x58/0x70
 fib6_rule_lookup+0x1a8/0x330
 ip6_route_output_flags_noref+0xd8/0x1a0
 ip6_route_output_flags+0x58/0x160
 ip6_dst_lookup_tail+0x5b4/0x85c
 ip6_dst_lookup_flow+0x98/0x120
 rawv6_sendmsg+0x49c/0xc70
 inet_sendmsg+0x68/0x94

Reproducer as following:
Firstly, prepare conditions:
$ip netns add ns1
$ip netns add ns2
$ip link add veth1 type veth peer name veth2
$ip link set veth1 netns ns1
$ip link set veth2 netns ns2
$ip netns exec ns1 ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1
$ip netns exec ns2 ip -6 addr add 2001:0db8:0:f101::2/64 dev veth2
$ip netns exec ns1 ifconfig veth1 up
$ip netns exec ns2 ifconfig veth2 up
$ip netns exec ns1 ip -6 route add 2000::/64 dev veth1 metric 1
$ip netns exec ns2 ip -6 route add 2001::/64 dev veth2 metric 1

Secondly, execute the following two commands in two ssh windows
respectively:
$ip netns exec ns1 sh
$while true; do ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1; ip -6 route add 2000::/64 dev veth1 metric 1; ping6 2000::2; done

$ip netns exec ns1 sh
$while true; do ip link set veth1 mtu 1000; ip link set veth1 mtu 1500; sleep 5; done

It is because ip6_ptr has been assigned to NULL in addrconf_ifdown() firstly,
then ip6_ignore_linkdown() accesses ip6_ptr directly without NULL check.

cpu0 cpu1
fib6_table_lookup
__find_rr_leaf
addrconf_notify [ NETDEV_CHANGEMTU ]
addrconf_ifdown
RCU_INIT_POINTER(dev->ip6_ptr, NULL)
find_match
ip6_ignore_linkdown

So we can add NULL check for ip6_ptr before using in ip6_ignore_linkdown() to
fix the null-ptr-deref bug.

Fixes: dcd1f572954f ("net/ipv6: Remove fib6_idev")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220728013307.656257-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ping6: Fix memleak in ipv6_renew_options().

commit e27326009a3d247b831eda38878c777f6f4eb3d1 upstream.

When we close ping6 sockets, some resources are left unfreed because
pingv6_prot is missing sk->sk_prot->destroy().  As reported by
syzbot [0], just three syscalls leak 96 bytes and easily cause OOM.

    struct ipv6_sr_hdr *hdr;
    char data[24] = {0};
    int fd;

    hdr = (struct ipv6_sr_hdr *)data;
    hdr->hdrlen = 2;
    hdr->type = IPV6_SRCRT_TYPE_4;

    fd = socket(AF_INET6, SOCK_DGRAM, NEXTHDR_ICMP);
    setsockopt(fd, IPPROTO_IPV6, IPV6_RTHDR, data, 24);
    close(fd);

To fix memory leaks, let's add a destroy function.

Note the socket() syscall checks if the GID is within the range of
net.ipv4.ping_group_range.  The default value is [1, 0] so that no
GID meets the condition (1 <= GID <= 0).  Thus, the local DoS does
not succeed until we change the default value.  However, at least
Ubuntu/Fedora/RHEL loosen it.

    $ cat /usr/lib/sysctl.d/50-default.conf
    ...
    -net.ipv4.ping_group_range = 0 2147483647

Also, there could be another path reported with these options, and
some of them require CAP_NET_RAW.

  setsockopt
      IPV6_ADDRFORM (inet6_sk(sk)->pktoptions)
      IPV6_RECVPATHMTU (inet6_sk(sk)->rxpmtu)
      IPV6_HOPOPTS (inet6_sk(sk)->opt)
      IPV6_RTHDRDSTOPTS (inet6_sk(sk)->opt)
      IPV6_RTHDR (inet6_sk(sk)->opt)
      IPV6_DSTOPTS (inet6_sk(sk)->opt)
      IPV6_2292PKTOPTIONS (inet6_sk(sk)->opt)

  getsockopt
      IPV6_FLOWLABEL_MGR (inet6_sk(sk)->ipv6_fl_list)

For the record, I left a different splat with syzbot's one.

  unreferenced object 0xffff888006270c60 (size 96):
    comm "repro2", pid 231, jiffies 4294696626 (age 13.118s)
    hex dump (first 32 bytes):
      01 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00  ....D...........
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    backtrace:
      [<00000000f6bc7ea9>] sock_kmalloc (net/core/sock.c:2564 net/core/sock.c:2554)
      [<000000006d699550>] do_ipv6_setsockopt.constprop.0 (net/ipv6/ipv6_sockglue.c:715)
      [<00000000c3c3b1f5>] ipv6_setsockopt (net/ipv6/ipv6_sockglue.c:1024)
      [<000000007096a025>] __sys_setsockopt (net/socket.c:2254)
      [<000000003a8ff47b>] __x64_sys_setsockopt (net/socket.c:2265 net/socket.c:2262 net/socket.c:2262)
      [<000000007c409dcb>] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
      [<00000000e939c4a9>] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)

[0]: https://syzkaller.appspot.com/bug?extid=a8430774139ec3ab7176

Fixes: 6d0bfe226116 ("net: ipv6: Add IPv6 support to the ping socket.")
Reported-by: syzbot+a8430774139ec3ab7176@syzkaller.appspotmail.com
Reported-by: Ayushman Dutta <ayudutta@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220728012220.46918-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mpt3sas: Stop fw fault watchdog work item during system shutdown

commit 0fde22c5420ed258ee538a760291c2f3935f6a01 upstream.

During system shutdown or reboot, mpt3sas will reset the firmware back to
ready state. However, the driver leaves running a watchdog work item
intended to keep the firmware in operational state. This causes a second,
unneeded reset on shutdown and moves the firmware back to operational
instead of in ready state as intended. And if the mpt3sas_fwfault_debug
module parameter is set, this extra reset also panics the system.

mpt3sas's scsih_shutdown needs to stop the watchdog before resetting the
firmware back to ready state.

Link: https://lore.kernel.org/r/20220722142448.6289-1-djeffery@redhat.com
Fixes: fae21608c31c ("scsi: mpt3sas: Transition IOC to Ready state during shutdown")
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: core: Fix warning in scsi_alloc_sgtables()

commit d9a434fa0c12ed5f7afe1e9dd30003ab5d059b85 upstream.

As explained in SG_IO howto[1]:

"If iovec_count is non-zero then 'dxfer_len' should be equal to the sum of
iov_len lengths. If not, the minimum of the two is the transfer length."

When iovec_count is non-zero and dxfer_len is zero, the sg_io() just
genarated a null bio, and finally caused a warning below. To fix it, skip
generating a bio for this request if dxfer_len is zero.

[1] https://tldp.org/HOWTO/SCSI-Generic-HOWTO/x198.html

WARNING: CPU: 2 PID: 3643 at drivers/scsi/scsi_lib.c:1032 scsi_alloc_sgtables+0xc7d/0xf70 drivers/scsi/scsi_lib.c:1032
Modules linked in:

CPU: 2 PID: 3643 Comm: syz-executor397 Not tainted
5.17.0-rc3-syzkaller-00316-gb81b1829e7e3 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-204/01/2014
RIP: 0010:scsi_alloc_sgtables+0xc7d/0xf70 drivers/scsi/scsi_lib.c:1032
Code: e7 fc 31 ff 44 89 f6 e8 c1 4e e7 fc 45 85 f6 0f 84 1a f5 ff ff e8
93 4c e7 fc 83 c5 01 0f b7 ed e9 0f f5 ff ff e8 83 4c e7 fc <0f> 0b 41
   bc 0a 00 00 00 e9 2b fb ff ff 41 bc 09 00 00 00 e9 20 fb
RSP: 0018:ffffc90000d07558 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88801bfc96a0 RCX: 0000000000000000
RDX: ffff88801c876000 RSI: ffffffff849060bd RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff849055b9 R11: 0000000000000000 R12: ffff888012b8c000
R13: ffff88801bfc9580 R14: 0000000000000000 R15: ffff88801432c000
FS:  00007effdec8e700(0000) GS:ffff88802cc00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007effdec6d718 CR3: 00000000206d6000 CR4: 0000000000150ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 scsi_setup_scsi_cmnd drivers/scsi/scsi_lib.c:1219 [inline]
 scsi_prepare_cmd drivers/scsi/scsi_lib.c:1614 [inline]
 scsi_queue_rq+0x283e/0x3630 drivers/scsi/scsi_lib.c:1730
 blk_mq_dispatch_rq_list+0x6ea/0x22e0 block/blk-mq.c:1851
 __blk_mq_sched_dispatch_requests+0x20b/0x410 block/blk-mq-sched.c:299
 blk_mq_sched_dispatch_requests+0xfb/0x180 block/blk-mq-sched.c:332
 __blk_mq_run_hw_queue+0xf9/0x350 block/blk-mq.c:1968
 __blk_mq_delay_run_hw_queue+0x5b6/0x6c0 block/blk-mq.c:2045
 blk_mq_run_hw_queue+0x30f/0x480 block/blk-mq.c:2096
 blk_mq_sched_insert_request+0x340/0x440 block/blk-mq-sched.c:451
 blk_execute_rq+0xcc/0x340 block/blk-mq.c:1231
 sg_io+0x67c/0x1210 drivers/scsi/scsi_ioctl.c:485
 scsi_ioctl_sg_io drivers/scsi/scsi_ioctl.c:866 [inline]
 scsi_ioctl+0xa66/0x1560 drivers/scsi/scsi_ioctl.c:921
 sd_ioctl+0x199/0x2a0 drivers/scsi/sd.c:1576
 blkdev_ioctl+0x37a/0x800 block/ioctl.c:588
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:874 [inline]
 __se_sys_ioctl fs/ioctl.c:860 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7effdecdc5d9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 81 14 00 00 90 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007effdec8e2f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007effded664c0 RCX: 00007effdecdc5d9
RDX: 0000000020002300 RSI: 0000000000002285 RDI: 0000000000000004
RBP: 00007effded34034 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
R13: 00007effded34054 R14: 2f30656c69662f2e R15: 00007effded664c8

Link: https://lore.kernel.org/r/20220720025120.3226770-1-yanaijie@huawei.com
Fixes: 25636e282fe9 ("block: fix SG_IO vector request data length handling")
Reported-by: syzbot+d44b35ecfb807e5af0b5@syzkaller.appspotmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: Fix a data-race around sysctl_tcp_challenge_ack_limit.

commit db3815a2fa691da145cfbe834584f31ad75df9ff upstream.

While reading sysctl_tcp_challenge_ack_limit, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its reader.

Fixes: 282f23c6ee34 ("tcp: implement RFC 5961 3.2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: Fix a data-race around sysctl_tcp_limit_output_bytes.

commit 9fb90193fbd66b4c5409ef729fd081861f8b6351 upstream.

While reading sysctl_tcp_limit_output_bytes, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its reader.

Fixes: 46d3ceabd8d9 ("tcp: TCP Small Queues")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: Fix data-races around sysctl_tcp_moderate_rcvbuf.

commit 780476488844e070580bfc9e3bc7832ec1cea883 upstream.

While reading sysctl_tcp_moderate_rcvbuf, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its readers.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

octeontx2-pf: Fix UDP/TCP src and dst port tc filters

commit 59e1be6f83b928a04189bbf3ab683a1fc6248db3 upstream.

Check the mask for non-zero value before installing tc filters
for L4 source and destination ports. Otherwise installing a
filter for source port installs destination port too and
vice-versa.

Fixes: 1d4d9e42c240 ("octeontx2-pf: Add tc flower hardware offload on ingress traffic")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "tcp: change pingpong threshold to 3"

commit 4d8f24eeedc58d5f87b650ddda73c16e8ba56559 upstream.

This reverts commit 4a41f453bedfd5e9cd040bad509d9da49feb3e2c.

This to-be-reverted commit was meant to apply a stricter rule for the
stack to enter pingpong mode. However, the condition used to check for
interactive session "before(tp->lsndtime, icsk->icsk_ack.lrcvtime)" is
jiffy based and might be too coarse, which delays the stack entering
pingpong mode.
We revert this patch so that we no longer use the above condition to
determine interactive session, and also reduce pingpong threshold to 1.

Fixes: 4a41f453bedf ("tcp: change pingpong threshold to 3")
Reported-by: LemmyHuang <hlm3280@163.com>
Suggested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220721204404.388396-1-weiwan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: host: Hold reference returned by of_parse_phandle()

commit a3435afba87dc6cd83f5595e7607f3c40f93ef01 upstream.

In ufshcd_populate_vreg(), we should hold the reference returned by
of_parse_phandle() and then use it to call of_node_put() for refcount
balance.

Link: https://lore.kernel.org/r/20220719071529.1081166-1-windhl@126.com
Fixes: aa4976130934 ("ufs: Add regulator enable support")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ice: do not setup vlan for loopback VSI

commit cc019545a238518fa9da1e2a889f6e1bb1005a63 upstream.

Currently loopback test is failiing due to the error returned from
ice_vsi_vlan_setup(). Skip calling it when preparing loopback VSI.

Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)

commit 283d736ff7c7e96ac5b32c6c0de40372f8eb171e upstream.

Tx side sets EOP and RS bits on descriptors to indicate that a
particular descriptor is the last one and needs to generate an irq when
it was sent. These bits should not be checked on completion path
regardless whether it's the Tx or the Rx. DD bit serves this purpose and
it indicates that a particular descriptor is either for Rx or was
successfully Txed. EOF is also set as loopback test does not xmit
fragmented frames.

Look at (DD | EOF) bits setting in ice_lbtest_receive_frames() instead
of EOP and RS pair.

Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: Fix data-races around sysctl_tcp_no_ssthresh_metrics_save.

commit ab1ba21b523ab496b1a4a8e396333b24b0a18f9a upstream.

While reading sysctl_tcp_no_ssthresh_metrics_save, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its readers.

Fixes: 65e6d90168f3 ("net-tcp: Disable TCP ssthresh metrics cache by default")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: Fix a data-race around sysctl_tcp_nometrics_save.

commit 8499a2454d9e8a55ce616ede9f9580f36fd5b0f3 upstream.

While reading sysctl_tcp_nometrics_save, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: Fix a data-race around sysctl_tcp_frto.

commit 706c6202a3589f290e1ef9be0584a8f4a3cc0507 upstream.

While reading sysctl_tcp_frto, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: Fix a data-race around sysctl_tcp_adv_win_scale.

commit 36eeee75ef0157e42fb6593dcc65daab289b559e upstream.

While reading sysctl_tcp_adv_win_scale, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: Fix a data-race around sysctl_tcp_app_win.

commit 02ca527ac5581cf56749db9fd03d854e842253dd upstream.

While reading sysctl_tcp_app_win, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: Fix data-races around sysctl_tcp_dsack.

commit 58ebb1c8b35a8ef38cd6927431e0fa7b173a632d upstream.

While reading sysctl_tcp_dsack, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watch_queue: Fix missing locking in add_watch_to_object()

commit e64ab2dbd882933b65cd82ff6235d705ad65dbb6 upstream.

If a watch is being added to a queue, it needs to guard against
interference from addition of a new watch, manual removal of a watch and
removal of a watch due to some other queue being destroyed.

KEYCTL_WATCH_KEY guards against this for the same {key,queue} pair by
holding the key->sem writelocked and by holding refs on both the key and
the queue - but that doesn't prevent interaction from other {key,queue}
pairs.

While add_watch_to_object() does take the spinlock on the event queue,
it doesn't take the lock on the source's watch list.  The assumption was
that the caller would prevent that (say by taking key->sem) - but that
doesn't prevent interference from the destruction of another queue.

Fix this by locking the watcher list in add_watch_to_object().

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: syzbot+03d7b43290037d1f87ca@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: keyrings@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watch_queue: Fix missing rcu annotation

commit e0339f036ef4beb9b20f0b6532a1e0ece7f594c6 upstream.

Since __post_watch_notification() walks wlist->watchers with only the
RCU read lock held, we need to use RCU methods to add to the list (we
already use RCU methods to remove from the list).

Fix add_watch_to_object() to use hlist_add_head_rcu() instead of
hlist_add_head() for that list.

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/simpledrm: Fix return type of simpledrm_simple_display_pipe_mode_valid()

commit 0c09bc33aa8e9dc867300acaadc318c2f0d85a1e upstream.

When booting a kernel compiled with clang's CFI protection
(CONFIG_CFI_CLANG), there is a CFI failure in
drm_simple_kms_crtc_mode_valid() when trying to call
simpledrm_simple_display_pipe_mode_valid() through ->mode_valid():

[    0.322802] CFI failure (target: simpledrm_simple_display_pipe_mode_valid+0x0/0x8):
...
[    0.324928] Call trace:
[    0.324969]  __ubsan_handle_cfi_check_fail+0x58/0x60
[    0.325053]  __cfi_check_fail+0x3c/0x44
[    0.325120]  __cfi_slowpath_diag+0x178/0x200
[    0.325192]  drm_simple_kms_crtc_mode_valid+0x58/0x80
[    0.325279]  __drm_helper_update_and_validate+0x31c/0x464
...

The ->mode_valid() member in 'struct drm_simple_display_pipe_funcs'
expects a return type of 'enum drm_mode_status', not 'int'. Correct it
to fix the CFI failure.

Cc: stable@vger.kernel.org
Fixes: 11e8f5fd223b ("drm: Add simpledrm driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1647
Reported-by: Tomasz Paweł Gajc <tpgxyz@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220725233629.223223-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nouveau/svm: Fix to migrate all requested pages

commit 66cee9097e2b74ff3c8cc040ce5717c521a0c3fa upstream.

Users may request that pages from an OpenCL SVM allocation be migrated
to the GPU with clEnqueueSVMMigrateMem(). In Nouveau this will call into
nouveau_dmem_migrate_vma() to do the migration. If the total range to be
migrated exceeds SG_MAX_SINGLE_ALLOC the pages will be migrated in
chunks of size SG_MAX_SINGLE_ALLOC. However a typo in updating the
starting address means that only the first chunk will get migrated.

Fix the calculation so that the entire range will get migrated if
possible.

Signed-off-by: Alistair Popple <apopple@nvidia.com>
Fixes: e3d8b0890469 ("drm/nouveau/svm: map pages after migration")
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720062745.960701-1-apopple@nvidia.com
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/archrandom: prevent CPACF trng invocations in interrupt context

commit 918e75f77af7d2e049bb70469ec0a2c12782d96a upstream.

This patch slightly reworks the s390 arch_get_random_seed_{int,long}
implementation: Make sure the CPACF trng instruction is never
called in any interrupt context. This is done by adding an
additional condition in_task().

Justification:

There are some constrains to satisfy for the invocation of the
arch_get_random_seed_{int,long}() functions:
- They should provide good random data during kernel initialization.
- They should not be called in interrupt context as the TRNG
  instruction is relatively heavy weight and may for example
  make some network loads cause to timeout and buck.

However, it was not clear what kind of interrupt context is exactly
encountered during kernel init or network traffic eventually calling
arch_get_random_seed_long().

After some days of investigations it is clear that the s390
start_kernel function is not running in any interrupt context and
so the trng is called:

Jul 11 18:33:39 t35lp54 kernel:  [<00000001064e90ca>] arch_get_random_seed_long.part.0+0x32/0x70
Jul 11 18:33:39 t35lp54 kernel:  [<000000010715f246>] random_init+0xf6/0x238
Jul 11 18:33:39 t35lp54 kernel:  [<000000010712545c>] start_kernel+0x4a4/0x628
Jul 11 18:33:39 t35lp54 kernel:  [<000000010590402a>] startup_continue+0x2a/0x40

The condition in_task() is true and the CPACF trng provides random data
during kernel startup.

The network traffic however, is more difficult. A typical call stack
looks like this:

Jul 06 17:37:07 t35lp54 kernel:  [<000000008b5600fc>] extract_entropy.constprop.0+0x23c/0x240
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b560136>] crng_reseed+0x36/0xd8
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b5604b8>] crng_make_state+0x78/0x340
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b5607e0>] _get_random_bytes+0x60/0xf8
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b56108a>] get_random_u32+0xda/0x248
Jul 06 17:37:07 t35lp54 kernel:  [<000000008aefe7a8>] kfence_guarded_alloc+0x48/0x4b8
Jul 06 17:37:07 t35lp54 kernel:  [<000000008aeff35e>] __kfence_alloc+0x18e/0x1b8
Jul 06 17:37:07 t35lp54 kernel:  [<000000008aef7f10>] __kmalloc_node_track_caller+0x368/0x4d8
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b611eac>] kmalloc_reserve+0x44/0xa0
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b611f98>] __alloc_skb+0x90/0x178
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b6120dc>] __napi_alloc_skb+0x5c/0x118
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b8f06b4>] qeth_extract_skb+0x13c/0x680
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b8f6526>] qeth_poll+0x256/0x3f8
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b63d76e>] __napi_poll.constprop.0+0x46/0x2f8
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b63dbec>] net_rx_action+0x1cc/0x408
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b937302>] __do_softirq+0x132/0x6b0
Jul 06 17:37:07 t35lp54 kernel:  [<000000008abf46ce>] __irq_exit_rcu+0x13e/0x170
Jul 06 17:37:07 t35lp54 kernel:  [<000000008abf531a>] irq_exit_rcu+0x22/0x50
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b922506>] do_io_irq+0xe6/0x198
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b935826>] io_int_handler+0xd6/0x110
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b9358a6>] psw_idle_exit+0x0/0xa
Jul 06 17:37:07 t35lp54 kernel: ([<000000008ab9c59a>] arch_cpu_idle+0x52/0xe0)
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b933cfe>] default_idle_call+0x6e/0xd0
Jul 06 17:37:07 t35lp54 kernel:  [<000000008ac59f4e>] do_idle+0xf6/0x1b0
Jul 06 17:37:07 t35lp54 kernel:  [<000000008ac5a28e>] cpu_startup_entry+0x36/0x40
Jul 06 17:37:07 t35lp54 kernel:  [<000000008abb0d90>] smp_start_secondary+0x148/0x158
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b935b9e>] restart_int_handler+0x6e/0x90

which confirms that the call is in softirq context. So in_task() covers exactly
the cases where we want to have CPACF trng called: not in nmi, not in hard irq,
not in soft irq but in normal task context and during kernel init.

Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Link: https://lore.kernel.org/r/20220713131721.257907-1-freude@linux.ibm.com
Fixes: e4f74400308c ("s390/archrandom: simplify back to earlier design and initialize earlier")
[agordeev@linux.ibm.com changed desc, added Fixes and Link, removed -stable]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

asm-generic: remove a broken and needless ifdef conditional

commit e2a619ca0b38f2114347b7078b8a67d72d457a3d upstream.

Commit 527701eda5f1 ("lib: Add a generic version of devmem_is_allowed()")
introduces the config symbol GENERIC_LIB_DEVMEM_IS_ALLOWED, but then
falsely refers to CONFIG_GENERIC_DEVMEM_IS_ALLOWED (note the missing LIB
in the reference) in ./include/asm-generic/io.h.

Luckily, ./scripts/checkkconfigsymbols.py warns on non-existing configs:

GENERIC_DEVMEM_IS_ALLOWED
Referencing files: include/asm-generic/io.h

The actual fix, though, is simply to not to make this function declaration
dependent on any kernel config. For architectures that intend to use
the generic version, the arch's 'select GENERIC_LIB_DEVMEM_IS_ALLOWED' will
lead to picking the function definition, and for other architectures, this
function is simply defined elsewhere.

The wrong '#ifndef' on a non-existing config symbol also always had the
same effect (although more by mistake than by intent). So, there is no
functional change.

Remove this broken and needless ifdef conditional.

Fixes: 527701eda5f1 ("lib: Add a generic version of devmem_is_allowed()")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hugetlb: fix memoryleak in hugetlb_mcopy_atomic_pte

commit da9a298f5fad0dc615079a340da42928bc5b138e upstream.

When alloc_huge_page fails, *pagep is set to NULL without put_page first.
So the hugepage indicated by *pagep is leaked.

Link: https://lkml.kernel.org/r/20220709092629.54291-1-linmiaohe@huawei.com
Fixes: 8cc5fcbb5be8 ("mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix page leak with multiple threads mapping the same page

commit 3fe2895cfecd03ac74977f32102b966b6589f481 upstream.

We have an application with a lot of threads that use a shared mmap backed
by tmpfs mounted with -o huge=within_size.  This application started
leaking loads of huge pages when we upgraded to a recent kernel.

Using the page ref tracepoints and a BPF program written by Tejun Heo we
were able to determine that these pages would have multiple refcounts from
the page fault path, but when it came to unmap time we wouldn't drop the
number of refs we had added from the faults.

I wrote a reproducer that mmap'ed a file backed by tmpfs with -o
huge=always, and then spawned 20 threads all looping faulting random
offsets in this map, while using madvise(MADV_DONTNEED) randomly for huge
page aligned ranges.  This very quickly reproduced the problem.

The problem here is that we check for the case that we have multiple
threads faulting in a range that was previously unmapped.  One thread maps
the PMD, the other thread loses the race and then returns 0.  However at
this point we already have the page, and we are no longer putting this
page into the processes address space, and so we leak the page.  We
actually did the correct thing prior to f9ce0be71d1f, however it looks
like Kirill copied what we do in the anonymous page case.  In the
anonymous page case we don't yet have a page, so we don't have to drop a
reference on anything.  Previously we did the correct thing for file based
faults by returning VM_FAULT_NOPAGE so we correctly drop the reference on
the page we faulted in.

Fix this by returning VM_FAULT_NOPAGE in the pmd_devmap_trans_unstable()
case, this makes us drop the ref on the page properly, and now my
reproducer no longer leaks the huge pages.

[josef@toxicpanda.com: v2]
Link: https://lkml.kernel.org/r/e90c8f0dbae836632b669c2afc434006a00d4a67.1657721478.git.josef@toxicpanda.com
Link: https://lkml.kernel.org/r/2b798acfd95c9ab9395fe85e8d5a835e2e10a920.1657051137.git.josef@toxicpanda.com
Fixes: f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault() codepaths")
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Chris Mason <clm@fb.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

secretmem: fix unhandled fault in truncate

commit 84ac013046ccc438af04b7acecd4d3ab84fe4bde upstream.

syzkaller reports the following issue:

BUG: unable to handle page fault for address: ffff888021f7e005
PGD 11401067 P4D 11401067 PUD 11402067 PMD 21f7d063 PTE 800fffffde081060
Oops: 0002 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 3761 Comm: syz-executor281 Not tainted 5.19.0-rc4-syzkaller-00014-g941e3e791269 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:memset_erms+0x9/0x10 arch/x86/lib/memset_64.S:64
Code: c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 f3 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 <f3> aa 4c 89 c8 c3 90 49 89 fa 40 0f b6 ce 48 b8 01 01 01 01 01 01
RSP: 0018:ffffc9000329fa90 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 0000000000001000 RCX: 0000000000000ffb
RDX: 0000000000000ffb RSI: 0000000000000000 RDI: ffff888021f7e005
RBP: ffffea000087df80 R08: 0000000000000001 R09: ffff888021f7e005
R10: ffffed10043efdff R11: 0000000000000000 R12: 0000000000000005
R13: 0000000000000000 R14: 0000000000001000 R15: 0000000000000ffb
FS:  00007fb29d8b2700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff888021f7e005 CR3: 0000000026e7b000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 zero_user_segments include/linux/highmem.h:272 [inline]
 folio_zero_range include/linux/highmem.h:428 [inline]
 truncate_inode_partial_folio+0x76a/0xdf0 mm/truncate.c:237
 truncate_inode_pages_range+0x83b/0x1530 mm/truncate.c:381
 truncate_inode_pages mm/truncate.c:452 [inline]
 truncate_pagecache+0x63/0x90 mm/truncate.c:753
 simple_setattr+0xed/0x110 fs/libfs.c:535
 secretmem_setattr+0xae/0xf0 mm/secretmem.c:170
 notify_change+0xb8c/0x12b0 fs/attr.c:424
 do_truncate+0x13c/0x200 fs/open.c:65
 do_sys_ftruncate+0x536/0x730 fs/open.c:193
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fb29d900899
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 11 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fb29d8b2318 EFLAGS: 00000246 ORIG_RAX: 000000000000004d
RAX: ffffffffffffffda RBX: 00007fb29d988408 RCX: 00007fb29d900899
RDX: 00007fb29d900899 RSI: 0000000000000005 RDI: 0000000000000003
RBP: 00007fb29d988400 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb29d98840c
R13: 00007ffca01a23bf R14: 00007fb29d8b2400 R15: 0000000000022000
 </TASK>
Modules linked in:
CR2: ffff888021f7e005
---[ end trace 0000000000000000 ]---

Eric Biggers suggested that this happens when
secretmem_setattr()->simple_setattr() races with secretmem_fault() so that
a page that is faulted in by secretmem_fault() (and thus removed from the
direct map) is zeroed by inode truncation right afterwards.

Use mapping->invalidate_lock to make secretmem_fault() and
secretmem_setattr() mutually exclusive.

[rppt@linux.ibm.com: v3]
Link: https://lkml.kernel.org/r/20220714091337.412297-1-rppt@kernel.org
Link: https://lkml.kernel.org/r/20220707165650.248088-1-rppt@kernel.org
Reported-by: syzbot+9bd2b7adbd34b30b87e4@syzkaller.appspotmail.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: sendfile handles O_NONBLOCK of out_fd

commit bdeb77bc2c405fa9f954c20269db175a0bd2793f upstream.

sendfile has to return EAGAIN if out_fd is nonblocking and the write into
it would block.

Here is a small reproducer for the problem:

#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <errno.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/sendfile.h>

#define FILE_SIZE (1UL << 30)
int main(int argc, char **argv) {
        int p[2], fd;

        if (pipe2(p, O_NONBLOCK))
                return 1;

        fd = open(argv[1], O_RDWR | O_TMPFILE, 0666);
        if (fd < 0)
                return 1;
        ftruncate(fd, FILE_SIZE);

        if (sendfile(p[1], fd, 0, FILE_SIZE) == -1) {
                fprintf(stderr, "FAIL\n");
        }
        if (sendfile(p[1], fd, 0, FILE_SIZE) != -1 || errno != EAGAIN) {
                fprintf(stderr, "FAIL\n");
        }
        return 0;
}

It worked before b964bf53e540, it is stuck after b964bf53e540, and it
works again with this fix.

This regression occurred because do_splice_direct() calls pipe_write
that handles O_NONBLOCK.  Here is a trace log from the reproducer:

 1)               |  __x64_sys_sendfile64() {
 1)               |    do_sendfile() {
 1)               |      __fdget()
 1)               |      rw_verify_area()
 1)               |      __fdget()
 1)               |      rw_verify_area()
 1)               |      do_splice_direct() {
 1)               |        rw_verify_area()
 1)               |        splice_direct_to_actor() {
 1)               |          do_splice_to() {
 1)               |            rw_verify_area()
 1)               |            generic_file_splice_read()
 1) + 74.153 us   |          }
 1)               |          direct_splice_actor() {
 1)               |            iter_file_splice_write() {
 1)               |              __kmalloc()
 1)   0.148 us    |              pipe_lock();
 1)   0.153 us    |              splice_from_pipe_next.part.0();
 1)   0.162 us    |              page_cache_pipe_buf_confirm();
... 16 times
 1)   0.159 us    |              page_cache_pipe_buf_confirm();
 1)               |              vfs_iter_write() {
 1)               |                do_iter_write() {
 1)               |                  rw_verify_area()
 1)               |                  do_iter_readv_writev() {
 1)               |                    pipe_write() {
 1)               |                      mutex_lock()
 1)   0.153 us    |                      mutex_unlock();
 1)   1.368 us    |                    }
 1)   1.686 us    |                  }
 1)   5.798 us    |                }
 1)   6.084 us    |              }
 1)   0.174 us    |              kfree();
 1)   0.152 us    |              pipe_unlock();
 1) + 14.461 us   |            }
 1) + 14.783 us   |          }
 1)   0.164 us    |          page_cache_pipe_buf_release();
... 16 times
 1)   0.161 us    |          page_cache_pipe_buf_release();
 1)               |          touch_atime()
 1) + 95.854 us   |        }
 1) + 99.784 us   |      }
 1) ! 107.393 us  |    }
 1) ! 107.699 us  |  }

Link: https://lkml.kernel.org/r/20220415005015.525191-1-avagin@gmail.com
Fixes: b964bf53e540 ("teach sendfile(2) to handle send-to-pipe directly")
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ntfs: fix use-after-free in ntfs_ucsncmp()

commit 38c9c22a85aeed28d0831f230136e9cf6fa2ed44 upstream.

Syzkaller reported use-after-free bug as follows:

==================================================================
BUG: KASAN: use-after-free in ntfs_ucsncmp+0x123/0x130
Read of size 2 at addr ffff8880751acee8 by task a.out/879

CPU: 7 PID: 879 Comm: a.out Not tainted 5.19.0-rc4-next-20220630-00001-gcc5218c8bd2c-dirty #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x1c0/0x2b0
 print_address_description.constprop.0.cold+0xd4/0x484
 print_report.cold+0x55/0x232
 kasan_report+0xbf/0xf0
 ntfs_ucsncmp+0x123/0x130
 ntfs_are_names_equal.cold+0x2b/0x41
 ntfs_attr_find+0x43b/0xb90
 ntfs_attr_lookup+0x16d/0x1e0
 ntfs_read_locked_attr_inode+0x4aa/0x2360
 ntfs_attr_iget+0x1af/0x220
 ntfs_read_locked_inode+0x246c/0x5120
 ntfs_iget+0x132/0x180
 load_system_files+0x1cc6/0x3480
 ntfs_fill_super+0xa66/0x1cf0
 mount_bdev+0x38d/0x460
 legacy_get_tree+0x10d/0x220
 vfs_get_tree+0x93/0x300
 do_new_mount+0x2da/0x6d0
 path_mount+0x496/0x19d0
 __x64_sys_mount+0x284/0x300
 do_syscall_64+0x3b/0xc0
 entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f3f2118d9ea
Code: 48 8b 0d a9 f4 0b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 76 f4 0b 00 f7 d8 64 89 01 48
RSP: 002b:00007ffc269deac8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3f2118d9ea
RDX: 0000000020000000 RSI: 0000000020000100 RDI: 00007ffc269dec00
RBP: 00007ffc269dec80 R08: 00007ffc269deb00 R09: 00007ffc269dec44
R10: 0000000000000000 R11: 0000000000000202 R12: 000055f81ab1d220
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 </TASK>

The buggy address belongs to the physical page:
page:0000000085430378 refcount:1 mapcount:1 mapping:0000000000000000 index:0x555c6a81d pfn:0x751ac
memcg:ffff888101f7e180
anon flags: 0xfffffc00a0014(uptodate|lru|mappedtodisk|swapbacked|node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc00a0014 ffffea0001bf2988 ffffea0001de2448 ffff88801712e201
raw: 0000000555c6a81d 0000000000000000 0000000100000000 ffff888101f7e180
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8880751acd80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8880751ace00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8880751ace80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
                                                          ^
 ffff8880751acf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8880751acf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================

The reason is that struct ATTR_RECORD->name_offset is 6485, end address of
name string is out of bounds.

Fix this by adding sanity check on end address of attribute name string.

[akpm@linux-foundation.org: coding-style cleanups]
[chenxiaosong2@huawei.com: cleanup suggested by Hawkins Jiawei]
Link: https://lkml.kernel.org/r/20220709064511.3304299-1-chenxiaosong2@huawei.com
Link: https://lkml.kernel.org/r/20220707105329.4020708-1-chenxiaosong2@huawei.com
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: ChenXiaoSong <chenxiaosong2@huawei.com>
Cc: Yongqiang Liu <liuyongqiang13@huawei.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ocfs2: mount shared volume without ha stack"

commit c80af0c250c8f8a3c978aa5aafbe9c39b336b813 upstream.

This reverts commit 912f655d78c5d4ad05eac287f23a435924df7144.

This commit introduced a regression that can cause mount hung.  The
changes in __ocfs2_find_empty_slot causes that any node with none-zero
node number can grab the slot that was already taken by node 0, so node 1
will access the same journal with node 0, when it try to grab journal
cluster lock, it will hung because it was already acquired by node 0.
It's very easy to reproduce this, in one cluster, mount node 0 first, then
node 1, you will see the following call trace from node 1.

[13148.735424] INFO: task mount.ocfs2:53045 blocked for more than 122 seconds.
[13148.739691]       Not tainted 5.15.0-2148.0.4.el8uek.mountracev2.x86_64 #2
[13148.742560] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[13148.745846] task:mount.ocfs2     state:D stack:    0 pid:53045 ppid: 53044 flags:0x00004000
[13148.749354] Call Trace:
[13148.750718]  <TASK>
[13148.752019]  ? usleep_range+0x90/0x89
[13148.753882]  __schedule+0x210/0x567
[13148.755684]  schedule+0x44/0xa8
[13148.757270]  schedule_timeout+0x106/0x13c
[13148.759273]  ? __prepare_to_swait+0x53/0x78
[13148.761218]  __wait_for_common+0xae/0x163
[13148.763144]  __ocfs2_cluster_lock.constprop.0+0x1d6/0x870 [ocfs2]
[13148.765780]  ? ocfs2_inode_lock_full_nested+0x18d/0x398 [ocfs2]
[13148.768312]  ocfs2_inode_lock_full_nested+0x18d/0x398 [ocfs2]
[13148.770968]  ocfs2_journal_init+0x91/0x340 [ocfs2]
[13148.773202]  ocfs2_check_volume+0x39/0x461 [ocfs2]
[13148.775401]  ? iput+0x69/0xba
[13148.777047]  ocfs2_mount_volume.isra.0.cold+0x40/0x1f5 [ocfs2]
[13148.779646]  ocfs2_fill_super+0x54b/0x853 [ocfs2]
[13148.781756]  mount_bdev+0x190/0x1b7
[13148.783443]  ? ocfs2_remount+0x440/0x440 [ocfs2]
[13148.785634]  legacy_get_tree+0x27/0x48
[13148.787466]  vfs_get_tree+0x25/0xd0
[13148.789270]  do_new_mount+0x18c/0x2d9
[13148.791046]  __x64_sys_mount+0x10e/0x142
[13148.792911]  do_syscall_64+0x3b/0x89
[13148.794667]  entry_SYSCALL_64_after_hwframe+0x170/0x0
[13148.797051] RIP: 0033:0x7f2309f6e26e
[13148.798784] RSP: 002b:00007ffdcee7d408 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
[13148.801974] RAX: ffffffffffffffda RBX: 00007ffdcee7d4a0 RCX: 00007f2309f6e26e
[13148.804815] RDX: 0000559aa762a8ae RSI: 0000559aa939d340 RDI: 0000559aa93a22b0
[13148.807719] RBP: 00007ffdcee7d5b0 R08: 0000559aa93a2290 R09: 00007f230a0b4820
[13148.810659] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffdcee7d420
[13148.813609] R13: 0000000000000000 R14: 0000559aa939f000 R15: 0000000000000000
[13148.816564]  </TASK>

To fix it, we can just fix __ocfs2_find_empty_slot.  But original commit
introduced the feature to mount ocfs2 locally even it is cluster based,
that is a very dangerous, it can easily cause serious data corruption,
there is no way to stop other nodes mounting the fs and corrupting it.
Setup ha or other cluster-aware stack is just the cost that we have to
take for avoiding corruption, otherwise we have to do it in kernel.

Link: https://lkml.kernel.org/r/20220603222801.42488-1-junxiao.bi@oracle.com
Fixes: 912f655d78c5("ocfs2: mount shared volume without ha stack")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <heming.zhao@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put

commit d0be8347c623e0ac4202a1d4e0373882821f56b0 upstream.

This fixes the following trace which is caused by hci_rx_work starting up
*after* the final channel reference has been put() during sock_close() but
*before* the references to the channel have been destroyed, so instead
the code now rely on kref_get_unless_zero/l2cap_chan_hold_unless_zero to
prevent referencing a channel that is about to be destroyed.

  refcount_t: increment on 0; use-after-free.
  BUG: KASAN: use-after-free in refcount_dec_and_test+0x20/0xd0
  Read of size 4 at addr ffffffc114f5bf18 by task kworker/u17:14/705

  CPU: 4 PID: 705 Comm: kworker/u17:14 Tainted: G S      W
  4.14.234-00003-g1fb6d0bd49a4-dirty #28
  Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150
  Google Inc. MSM sm8150 Flame DVT (DT)
  Workqueue: hci0 hci_rx_work
  Call trace:
   dump_backtrace+0x0/0x378
   show_stack+0x20/0x2c
   dump_stack+0x124/0x148
   print_address_description+0x80/0x2e8
   __kasan_report+0x168/0x188
   kasan_report+0x10/0x18
   __asan_load4+0x84/0x8c
   refcount_dec_and_test+0x20/0xd0
   l2cap_chan_put+0x48/0x12c
   l2cap_recv_frame+0x4770/0x6550
   l2cap_recv_acldata+0x44c/0x7a4
   hci_acldata_packet+0x100/0x188
   hci_rx_work+0x178/0x23c
   process_one_work+0x35c/0x95c
   worker_thread+0x4cc/0x960
   kthread+0x1a8/0x1c4
   ret_from_fork+0x10/0x18

Cc: stable@kernel.org
Reported-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.58

Link: https://lore.kernel.org/r/20220727161026.977588183@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220728133327.660846209@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Fix wrong format specifier in amdgpu_dm.c

commit 655c167edc8c260b6df08bdcfaca8afde0efbeb6 upstream.

[Why]
Currently, the 32bit kernel build fails due to an incorrect string
format specifier. ARRAY_SIZE() returns size_t type as it uses sizeof().
However, we specify it in a string as %ld. This causes a compiler error
and causes the 32bit build to fail.

[How]
Change the %ld to %zu as size_t (which sizeof() returns) is an unsigned
integer data type. We use 'z' to ensure it also works with 64bit build.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hayden Goodfellow <Hayden.Goodfellow@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry_32: Fix segment exceptions

commit 9cdbeec4096804083944d05da96bbaf59a1eb4f9 upstream.

The LKP robot reported that commit in Fixes: caused a failure. Turns out
the ldt_gdt_32 selftest turns into an infinite loop trying to clear the
segment.

As discovered by Sean, what happens is that PARANOID_EXIT_TO_KERNEL_MODE
in the handle_exception_return path overwrites the entry stack data with
the task stack data, restoring the "bad" segment value.

Instead of having the exception retry the instruction, have it emulate
the full instruction. Replace EX_TYPE_POP_ZERO with EX_TYPE_POP_REG
which will do the equivalent of: POP %reg; MOV $imm, %reg.

In order to encode the segment registers, add them as registers 8-11 for
32-bit.

By setting regs->[defg]s the (nested) RESTORE_REGS will pop this value
at the end of the exception handler and by increasing regs->sp, it will
have skipped the stack slot.

This was debugged by Sean Christopherson <seanjc@google.com>.

 [ bp: Add EX_REG_GS too. ]

Fixes: aa93e2ad7464 ("x86/entry_32: Remove .fixup usage")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/Yd1l0gInc4zRcnt/@hirez.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Off by one in dm_dmub_outbox1_low_irq()

commit a35faec3db0e13aac8ea720bc1a3503081dd5a3d upstream.

The > ARRAY_SIZE() should be >= ARRAY_SIZE() to prevent an out of bounds
access.

Fixes: e27c41d5b068 ("drm/amd/display: Support for DMUB HPD interrupt handling")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: drop bogus "cc" clobber from __try_cmpxchg_user_asm()

commit 1df931d95f4dc1c11db1123e85d4e08156e46ef9 upstream.

As noted (and fixed) a couple of times in the past, "=@cc<cond>" outputs
and clobbering of "cc" don't work well together. The compiler appears to
mean to reject such, but doesn't - in its upstream form - quite manage
to yet for "cc". Furthermore two similar macros don't clobber "cc", and
clobbering "cc" is pointless in asm()-s for x86 anyway - the compiler
always assumes status flags to be clobbered there.

Fixes: 989b5db215a2 ("x86/uaccess: Implement macros for CMPXCHG on user addresses")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Message-Id: <485c0c0b-a3a7-0b7c-5264-7d00c01de032@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: fix typo in __try_cmpxchg_user causing non-atomicness

commit 33fbe6befa622c082f7d417896832856814bdde0 upstream.

This shows up as a TDP MMU leak when running nested.  Non-working cmpxchg on L0
relies makes L1 install two different shadow pages under same spte, and one of
them is leaked.

Fixes: 1c2361f667f36 ("KVM: x86: Use __try_cmpxchg_user() to emulate atomic accesses")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220512101420.306759-1-mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/extable: Prefer local labels in .set directives

commit 334865b2915c33080624e0d06f1c3e917036472c upstream.

Bernardo reported an error that Nathan bisected down to
(x86_64) defconfig+LTO_CLANG_FULL+X86_PMEM_LEGACY.

    LTO     vmlinux.o
  ld.lld: error: <instantiation>:1:13: redefinition of 'found'
  .set found, 0
              ^

  <inline asm>:29:1: while in macro instantiation
  extable_type_reg reg=%eax, type=(17 | ((0) << 16))
  ^

This appears to be another LTO specific issue similar to what was folded
into commit 4b5305decc84 ("x86/extable: Extend extable functionality"),
where the `.set found, 0` in DEFINE_EXTABLE_TYPE_REG in
arch/x86/include/asm/asm.h conflicts with the symbol for the static
function `found` in arch/x86/kernel/pmem.c.

Assembler .set directive declare symbols with global visibility, so the
assembler may not rename such symbols in the event of a conflict. LTO
could rename static functions if there was a conflict in C sources, but
it cannot see into symbols defined in inline asm.

The symbols are also retained in the symbol table, regardless of LTO.

Give the symbols .L prefixes making them locally visible, so that they
may be renamed for LTO to avoid conflicts, and to drop them from the
symbol table regardless of LTO.

Fixes: 4b5305decc84 ("x86/extable: Extend extable functionality")
Reported-by: Bernardo Meurer Costa <beme@google.com>
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220329202148.2379697-1-ndesaulniers@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: invalid parameter check in dmub_hpd_callback

commit 978ffac878fd64039f95798b15b430032d2d89d5 upstream.

The function performs a check on the "adev" input parameter, however, it
is used before the check.

Initialize the "dev" variable after the sanity check to avoid a possible
NULL pointer dereference.

Fixes: e27c41d5b0681 ("drm/amd/display: Support for DMUB HPD interrupt handling")
Addresses-Coverity-ID: 1493909 ("Null pointer dereference")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Don't lock connection_mutex for DMUB HPD

commit d82b3266ef88dc10fe0e7031b2bd8ba7eedb7e59 upstream.

[Why]
Per DRM spec we only need to hold that lock when touching
connector->state - which we do not do in that handler.

Taking this locking introduces unnecessary dependencies with other
threads which is bad for performance and opens up the potential for
a deadlock since there are multiple locks being held at once.

[How]
Remove the connection_mutex lock/unlock routine and just iterate over
the drm connectors normally. The iter helpers implicitly lock the
connection list so this is safe to do.

DC link access also does not need to be guarded since the link
table is static at creation - we don't dynamically add or remove links,
just streams.

Fixes: e27c41d5b068 ("drm/amd/display: Support for DMUB HPD interrupt handling")

Reviewed-by: Jude Shih <shenshih@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watch-queue: remove spurious double semicolon

commit 44e29e64cf1ac0cffb152e0532227ea6d002aa28 upstream.

Sedat Dilek noticed that I had an extraneous semicolon at the end of a
line in the previous patch.

It's harmless, but unintentional, and while compilers just treat it as
an extra empty statement, for all I know some other tooling might warn
about it. So clean it up before other people notice too ;)

Fixes: 353f7988dd84 ("watchqueue: make sure to serialize 'wqueue->defunct' properly")
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: ax88179_178a needs FLAG_SEND_ZLP

commit 36a15e1cb134c0395261ba1940762703f778438c upstream.

The extra byte inserted by usbnet.c when
 (length % dev->maxpacket == 0) is causing problems to device.

This patch sets FLAG_SEND_ZLP to avoid this.

Tested with: 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet

Problems observed:
======================================================================
1) Using ssh/sshfs. The remote sshd daemon can abort with the message:
   "message authentication code incorrect"
   This happens because the tcp message sent is corrupted during the
   USB "Bulk out". The device calculate the tcp checksum and send a
   valid tcp message to the remote sshd. Then the encryption detects
   the error and aborts.
2) NETDEV WATCHDOG: ... (ax88179_178a): transmit queue 0 timed out
3) Stop normal work without any log message.
   The "Bulk in" continue receiving packets normally.
   The host sends "Bulk out" and the device responds with -ECONNRESET.
   (The netusb.c code tx_complete ignore -ECONNRESET)
Under normal conditions these errors take days to happen and in
intense usage take hours.

A test with ping gives packet loss, showing that something is wrong:
ping -4 -s 462 {destination} # 462 = 512 - 42 - 8
Not all packets fail.
My guess is that the device tries to find another packet starting
at the extra byte and will fail or not depending on the next
bytes (old buffer content).
======================================================================

Signed-off-by: Jose Alonso <joalonsof@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: use new tty_insert_flip_string_and_push_buffer() in pty_write()

commit a501ab75e7624d133a5a3c7ec010687c8b961d23 upstream.

There is a race in pty_write(). pty_write() can be called in parallel
with e.g. ioctl(TIOCSTI) or ioctl(TCXONC) which also inserts chars to
the buffer. Provided, tty_flip_buffer_push() in pty_write() is called
outside the lock, it can commit inconsistent tail. This can lead to out
of bounds writes and other issues. See the Link below.

To fix this, we have to introduce a new helper called
tty_insert_flip_string_and_push_buffer(). It does both
tty_insert_flip_string() and tty_flip_buffer_commit() under the port
lock. It also calls queue_work(), but outside the lock. See
71a174b39f10 (pty: do tty_flip_buffer_push without port->lock in
pty_write) for the reasons.

Keep the helper internal-only (in drivers' tty.h). It is not intended to
be used widely.

Link: https://seclists.org/oss-sec/2022/q2/155
Fixes: 71a174b39f10 (pty: do tty_flip_buffer_push without port->lock in pty_write)
Cc: 一只狗 <chennbnbnb@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220707082558.9250-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: extract tty_flip_buffer_commit() from tty_flip_buffer_push()

commit 716b10580283fda66f2b88140e3964f8a7f9da89 upstream.

We will need this new helper in the next patch.

Cc: Hillf Danton <hdanton@sina.com>
Cc: 一只狗 <chennbnbnb@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220707082558.9250-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: drop tty_schedule_flip()

commit 5db96ef23bda6c2a61a51693c85b78b52d03f654 upstream.

Since commit a9c3f68f3cd8d (tty: Fix low_latency BUG) in 2014,
tty_flip_buffer_push() is only a wrapper to tty_schedule_flip(). All
users were converted in the previous patches, so remove
tty_schedule_flip() completely while inlining its body into
tty_flip_buffer_push().

One less exported function.

Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20211122111648.30379-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: the rest, stop using tty_schedule_flip()

commit b68b914494df4f79b4e9b58953110574af1cb7a2 upstream.

Since commit a9c3f68f3cd8d (tty: Fix low_latency BUG) in 2014,
tty_flip_buffer_push() is only a wrapper to tty_schedule_flip(). We are
going to remove the latter (as it is used less), so call the former in
the rest of the users.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@reisers.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20211122111648.30379-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: drivers/tty/, stop using tty_schedule_flip()

commit 5f6a85158ccacc3f09744b3aafe8b11ab3b6c6f6 upstream.

Since commit a9c3f68f3cd8d (tty: Fix low_latency BUG) in 2014,
tty_flip_buffer_push() is only a wrapper to tty_schedule_flip(). We are
going to remove the latter (as it is used less), so call the former in
drivers/tty/.

Cc: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20211122111648.30379-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchqueue: make sure to serialize 'wqueue->defunct' properly

commit 353f7988dd8413c47718f7ca79c030b6fb62cfe5 upstream.

When the pipe is closed, we mark the associated watchqueue defunct by
calling watch_queue_clear().  However, while that is protected by the
watchqueue lock, new watchqueue entries aren't actually added under that
lock at all: they use the pipe->rd_wait.lock instead, and looking up
that pipe happens without any locking.

The watchqueue code uses the RCU read-side section to make sure that the
wqueue entry itself hasn't disappeared, but that does not protect the
pipe_info in any way.

So make sure to actually hold the wqueue lock when posting watch events,
properly serializing against the pipe being torn down.

Reported-by: Noam Rathaus <noamr@ssd-disclosure.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/alternative: Report missing return thunk details

commit 65cdf0d623bedf0e069bb64ed52e8bb20105e2ba upstream.

Debugging missing return thunks is easier if we can see where they're
happening.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/Ys66hwtFcGbYmoiZ@hirez.programming.kicks-ass.net/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/amd: Use IBPB for firmware calls

commit 28a99e95f55c61855983d36a88c05c178d966bb7 upstream.

On AMD IBRS does not prevent Retbleed; as such use IBPB before a
firmware call to flush the branch history state.

And because in order to do an EFI call, the kernel maps a whole lot of
the kernel page table into the EFI page table, do an IBPB just in case
in order to prevent the scenario of poisoning the BTB and causing an EFI
call using the unprotected RET there.

  [ bp: Massage. ]

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220715194550.793957-1-cascardo@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>