virtio-blk: fix hw_queue stopped on arbitrary error

commit f5f6b95c72f7f8bb46eace8c5306c752d0133daa upstream.

Since nobody else is going to restart our hw_queue for us, the
blk_mq_start_stopped_hw_queues() is in virtblk_done() is not sufficient
necessarily sufficient to ensure that the queue will get started again.
In case of global resource outage (-ENOMEM because mapping failure,
because of swiotlb full) our virtqueue may be empty and we can get
stuck with a stopped hw_queue.

Let us not stop the queue on arbitrary errors, but only on -EONSPC which
indicates a full virtqueue, where the hw_queue is guaranteed to get
started by virtblk_done() before when it makes sense to carry on
submitting requests. Let us also remove a stale comment.

Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Fixes: f7728002c1c7 ("virtio_ring: fix return code on DMA mapping fails")
Link: https://lore.kernel.org/r/20200213123728.61216-2-pasic@linux.ibm.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: Do not require PHY_SKU NVM section for 3168 devices

commit a9149d243f259ad8f02b1e23dfe8ba06128f15e1 upstream.

The logic for checking required NVM sections was recently fixed in
commit b3f20e098293 ("iwlwifi: mvm: fix NVM check for 3168
devices"). However, with that fixed the else is now taken for 3168
devices and within the else clause there is a mandatory check for the
PHY_SKU section. This causes the parsing to fail for 3168 devices.

The PHY_SKU section is really only mandatory for the IWL_NVM_EXT
layout (the phy_sku parameter of iwl_parse_nvm_data is only used when
the NVM type is IWL_NVM_EXT). So this changes the PHY_SKU section
check so that it's only mandatory for IWL_NVM_EXT.

Fixes: b3f20e098293 ("iwlwifi: mvm: fix NVM check for 3168 devices")
Signed-off-by: Dan Moulding <dmoulding@me.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: fix infinite loop when expr is not available

commit 1d305ba40eb8081ff21eeb8ca6ba5c70fd920934 upstream.

nft will loop forever if the kernel doesn't support an expression:

1. nft_expr_type_get() appends the family specific name to the module list.
2. -EAGAIN is returned to nfnetlink, nfnetlink calls abort path.
3. abort path sets ->done to true and calls request_module for the
   expression.
4. nfnetlink replays the batch, we end up in nft_expr_type_get() again.
5. nft_expr_type_get attempts to append family-specific name. This
   one already exists on the list, so we continue
6. nft_expr_type_get adds the generic expression name to the module
   list. -EAGAIN is returned, nfnetlink calls abort path.
7. abort path encounters the family-specific expression which
   has 'done' set, so it gets removed.
8. abort path requests the generic expression name, sets done to true.
9. batch is replayed.

If the expression could not be loaded, then we will end up back at 1),
because the family-specific name got removed and the cycle starts again.

Note that userspace can SIGKILL the nft process to stop the cycle, but
the desired behaviour is to return an error after the generic expr name
fails to load the expression.

Fixes: eb014de4fd418 ("netfilter: nf_tables: autoload modules from the abort path")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: Iterate tasks that did not finish do_exit()

commit 9c974c77246460fa6a92c18554c3311c8c83c160 upstream.

PF_EXITING is set earlier than actual removal from css_set when a task
is exitting. This can confuse cgroup.procs readers who see no PF_EXITING
tasks, however, rmdir is checking against css_set membership so it can
transitionally fail with EBUSY.

Fix this by listing tasks that weren't unlinked from css_set active
lists.
It may happen that other users of the task iterator (without
CSS_TASK_ITER_PROCS) spot a PF_EXITING task before cgroup_exit(). This
is equal to the state before commit c03cd7738a83 ("cgroup: Include dying
leaders with live threads in PROCS iterations") but it may be reviewed
later.

Reported-by: Suren Baghdasaryan <surenb@google.com>
Fixes: c03cd7738a83 ("cgroup: Include dying leaders with live threads in PROCS iterations")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: cgroup_procs_next should increase position index

commit 2d4ecb030dcc90fb725ecbfc82ce5d6c37906e0e upstream.

If seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output:

1) dd bs=1 skip output of each 2nd elements
$ dd if=/sys/fs/cgroup/cgroup.procs bs=8 count=1
2
3
4
5
1+0 records in
1+0 records out
8 bytes copied, 0,000267297 s, 29,9 kB/s
[test@localhost ~]$ dd if=/sys/fs/cgroup/cgroup.procs bs=1 count=8
2
4 <<< NB! 3 was skipped
6 <<<    ... and 5 too
8 <<<    ... and 7
8+0 records in
8+0 records out
8 bytes copied, 5,2123e-05 s, 153 kB/s

 This happen because __cgroup_procs_start() makes an extra
 extra cgroup_procs_next() call

2) read after lseek beyond end of file generates whole last line.
3) read after lseek into middle of last line generates
expected rest of last line and unexpected whole line once again.

Additionally patch removes an extra position index changes in
__cgroup_procs_start()

Cc: stable@vger.kernel.org
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: Avoid multiple suspends

commit 503ba7c6961034ff0047707685644cad9287c226 upstream.

It is currently possible for a PHY device to be suspended as part of a
network device driver's suspend call while it is still being attached to
that net_device, either via phy_suspend() or implicitly via phy_stop().

Later on, when the MDIO bus controller get suspended, we would attempt
to suspend again the PHY because it is still attached to a network
device.

This is both a waste of time and creates an opportunity for improper
clock/power management bugs to creep in.

Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed

[ Upstream commit a20f997010c4ec76eaa55b8cc047d76dcac69f70 ]

By default, DSA drivers should configure CPU and DSA ports to their
maximum speed. In many configurations this is sufficient to make the
link work.

In some cases it is necessary to configure the link to run slower,
e.g. because of limitations of the SoC it is connected to. Or back to
back PHYs are used and the PHY needs to be driven in order to
establish link. In this case, phylink is used.

Only instantiate phylink if it is required. If there is no PHY, or no
fixed link properties, phylink can upset a link which works in the
default configuration.

Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/net/fib_tests: update addr_metric_test for peer route testing

[ Upstream commit 0d29169a708bf730ede287248e429d579f432d1d ]

This patch update {ipv4, ipv6}_addr_metric_test with
1. Set metric of address with peer route and see if the route added
correctly.
2. Modify metric and peer address for peer route and see if the route
changed correctly.

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/ipv6: remove the old peer route if change it to a new one

[ Upstream commit d0098e4c6b83e502cc1cd96d67ca86bc79a6c559 ]

When we modify the peer route and changed it to a new one, we should
remove the old route first. Before the fix:

+ ip addr add dev dummy1 2001:db8::1 peer 2001:db8::2
+ ip -6 route show dev dummy1
2001:db8::1 proto kernel metric 256 pref medium
2001:db8::2 proto kernel metric 256 pref medium
+ ip addr change dev dummy1 2001:db8::1 peer 2001:db8::3
+ ip -6 route show dev dummy1
2001:db8::1 proto kernel metric 256 pref medium
2001:db8::2 proto kernel metric 256 pref medium

After the fix:
+ ip addr change dev dummy1 2001:db8::1 peer 2001:db8::3
+ ip -6 route show dev dummy1
2001:db8::1 proto kernel metric 256 pref medium
2001:db8::3 proto kernel metric 256 pref medium

This patch depend on the previous patch "net/ipv6: need update peer route
when modify metric" to update new peer route after delete old one.

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/ipv6: need update peer route when modify metric

[ Upstream commit 617940123e0140521f3080d2befc2bf55bcda094 ]

When we modify the route metric, the peer address's route need also
be updated. Before the fix:

+ ip addr add dev dummy1 2001:db8::1 peer 2001:db8::2 metric 60
+ ip -6 route show dev dummy1
2001:db8::1 proto kernel metric 60 pref medium
2001:db8::2 proto kernel metric 60 pref medium
+ ip addr change dev dummy1 2001:db8::1 peer 2001:db8::2 metric 61
+ ip -6 route show dev dummy1
2001:db8::1 proto kernel metric 61 pref medium
2001:db8::2 proto kernel metric 60 pref medium

After the fix:
+ ip addr change dev dummy1 2001:db8::1 peer 2001:db8::2 metric 61
+ ip -6 route show dev dummy1
2001:db8::1 proto kernel metric 61 pref medium
2001:db8::2 proto kernel metric 61 pref medium

Fixes: 8308f3ff1753 ("net/ipv6: Add support for specifying metric of connected routes")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: fix MDIO bus PM PHY resuming

[ Upstream commit 611d779af7cad2b87487ff58e4931a90c20b113c ]

So far we have the unfortunate situation that mdio_bus_phy_may_suspend()
is called in suspend AND resume path, assuming that function result is
the same. After the original change this is no longer the case,
resulting in broken resume as reported by Geert.

To fix this call mdio_bus_phy_may_suspend() in the suspend path only,
and let the phy_device store the info whether it was suspended by
MDIO bus PM.

Fixes: 503ba7c69610 ("net: phy: Avoid multiple suspends")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: avoid clearing PHY interrupts twice in irq handler

[ Upstream commit 249bc9744e165abe74ae326f43e9d70bad54c3b7 ]

On all PHY drivers that implement did_interrupt() reading the interrupt
status bits clears them. This means we may loose an interrupt that
is triggered between calling did_interrupt() and phy_clear_interrupt().
As part of the fix make it a requirement that did_interrupt() clears
the interrupt.

The Fixes tag refers to the first commit where the patch applies
cleanly.

Fixes: 49644e68f472 ("net: phy: add callback for custom interrupt handler to struct phy_driver")
Reported-by: Michael Walle <michael@walle.cc>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: add missing attribute validation for vendor subcommand

[ Upstream commit 6ba3da446551f2150fadbf8c7788edcb977683d3 ]

Add missing attribute validation for vendor subcommand attributes
to the netlink policy.

Fixes: 9e58095f9660 ("NFC: netlink: Implement vendor command support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: add missing attribute validation for deactivate target

[ Upstream commit 88e706d5168b07df4792dbc3d1bc37b83e4bd74d ]

Add missing attribute validation for NFC_ATTR_TARGET_INDEX
to the netlink policy.

Fixes: 4d63adfe12dd ("NFC: Add NFC_CMD_DEACTIVATE_TARGET support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: add missing attribute validation for SE API

[ Upstream commit 361d23e41ca6e504033f7e66a03b95788377caae ]

Add missing attribute validation for NFC_ATTR_SE_INDEX
to the netlink policy.

Fixes: 5ce3f32b5264 ("NFC: netlink: SE API implementation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: add missing attribute validation for MTU property

[ Upstream commit 213320a67962ff6e7b83b704d55cbebc341426db ]

Add missing attribute validation for TIPC_NLA_PROP_MTU
to the netlink policy.

Fixes: 901271e0403a ("tipc: implement configuration of UDP media MTU")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

team: add missing attribute validation for array index

[ Upstream commit 669fcd7795900cd1880237cbbb57a7db66cb9ac8 ]

Add missing attribute validation for TEAM_ATTR_OPTION_ARRAY_INDEX
to the netlink policy.

Fixes: b13033262d24 ("team: introduce array options")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

team: add missing attribute validation for port ifindex

[ Upstream commit dd25cb272ccce4db67dc8509278229099e4f5e99 ]

Add missing attribute validation for TEAM_ATTR_OPTION_PORT_IFINDEX
to the netlink policy.

Fixes: 80f7c6683fe0 ("team: add support for per-port options")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: taprio: add missing attribute validation for txtime delay

[ Upstream commit e13aaa0643da10006ec35715954e7f92a62899a5 ]

Add missing attribute validation for TCA_TAPRIO_ATTR_TXTIME_DELAY
to the netlink policy.

Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fq: add missing attribute validation for orphan mask

[ Upstream commit 7e6dc03eeb023e18427a373522f1d247b916a641 ]

Add missing attribute validation for TCA_FQ_ORPHAN_MASK
to the netlink policy.

Fixes: 06eb395fa985 ("pkt_sched: fq: better control of DDOS traffic")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macsec: add missing attribute validation for port

[ Upstream commit 31d9a1c524964bac77b7f9d0a1ac140dc6b57461 ]

Add missing attribute validation for IFLA_MACSEC_PORT
to the netlink policy.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: add missing attribute validation for termination

[ Upstream commit ab02ad660586b94f5d08912a3952b939cf4c4430 ]

Add missing attribute validation for IFLA_CAN_TERMINATION
to the netlink policy.

Fixes: 12a6075cabc0 ("can: dev: add CAN interface termination API")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nl802154: add missing attribute validation for dev_type

[ Upstream commit b60673c4c418bef7550d02faf53c34fbfeb366bf ]

Add missing attribute type validation for IEEE802154_ATTR_DEV_TYPE
to the netlink policy.

Fixes: 90c049b2c6ae ("ieee802154: interface type to be added")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nl802154: add missing attribute validation

[ Upstream commit 9322cd7c4af2ccc7fe7c5f01adb53f4f77949e92 ]

Add missing attribute validation for several u8 types.

Fixes: 2c21d11518b6 ("net: add NL802154 interface for configuration of 802.15.4 devices")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fib: add missing attribute validation for tun_id

[ Upstream commit 4c16d64ea04056f1b1b324ab6916019f6a064114 ]

Add missing netlink policy entry for FRA_TUN_ID.

Fixes: e7030878fc84 ("fib: Add fib rule match on tunnel id")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

devlink: validate length of region addr/len

[ Upstream commit ff3b63b8c299b73ac599b120653b47e275407656 ]

DEVLINK_ATTR_REGION_CHUNK_ADDR and DEVLINK_ATTR_REGION_CHUNK_LEN
lack entries in the netlink policy. Corresponding nla_get_u64()s
may read beyond the end of the message.

Fixes: 4e54795a27f5 ("devlink: Add support for region snapshot read command")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

devlink: validate length of param values

[ Upstream commit 8750939b6ad86abc3f53ec8a9683a1cded4a5654 ]

DEVLINK_ATTR_PARAM_VALUE_DATA may have different types
so it's not checked by the normal netlink policy. Make
sure the attribute length is what we expect.

Fixes: e3b7ca18ad7b ("devlink: Add param set command")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: memcg: fix lockdep splat in inet_csk_accept()

commit 06669ea346e476a5339033d77ef175566a40efbb upstream.

Locking newsk while still holding the listener lock triggered
a lockdep splat [1]

We can simply move the memcg code after we release the listener lock,
as this can also help if multiple threads are sharing a common listener.

Also fix a typo while reading socket sk_rmem_alloc.

[1]
WARNING: possible recursive locking detected
5.6.0-rc3-syzkaller #0 Not tainted
--------------------------------------------
syz-executor598/9524 is trying to acquire lock:
ffff88808b5b8b90 (sk_lock-AF_INET6){+.+.}, at: lock_sock include/net/sock.h:1541 [inline]
ffff88808b5b8b90 (sk_lock-AF_INET6){+.+.}, at: inet_csk_accept+0x69f/0xd30 net/ipv4/inet_connection_sock.c:492

but task is already holding lock:
ffff88808b5b9590 (sk_lock-AF_INET6){+.+.}, at: lock_sock include/net/sock.h:1541 [inline]
ffff88808b5b9590 (sk_lock-AF_INET6){+.+.}, at: inet_csk_accept+0x8d/0xd30 net/ipv4/inet_connection_sock.c:445

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(sk_lock-AF_INET6);
  lock(sk_lock-AF_INET6);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

1 lock held by syz-executor598/9524:
 #0: ffff88808b5b9590 (sk_lock-AF_INET6){+.+.}, at: lock_sock include/net/sock.h:1541 [inline]
 #0: ffff88808b5b9590 (sk_lock-AF_INET6){+.+.}, at: inet_csk_accept+0x8d/0xd30 net/ipv4/inet_connection_sock.c:445

stack backtrace:
CPU: 0 PID: 9524 Comm: syz-executor598 Not tainted 5.6.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x188/0x20d lib/dump_stack.c:118
 print_deadlock_bug kernel/locking/lockdep.c:2370 [inline]
 check_deadlock kernel/locking/lockdep.c:2411 [inline]
 validate_chain kernel/locking/lockdep.c:2954 [inline]
 __lock_acquire.cold+0x114/0x288 kernel/locking/lockdep.c:3954
 lock_acquire+0x197/0x420 kernel/locking/lockdep.c:4484
 lock_sock_nested+0xc5/0x110 net/core/sock.c:2947
 lock_sock include/net/sock.h:1541 [inline]
 inet_csk_accept+0x69f/0xd30 net/ipv4/inet_connection_sock.c:492
 inet_accept+0xe9/0x7c0 net/ipv4/af_inet.c:734
 __sys_accept4_file+0x3ac/0x5b0 net/socket.c:1758
 __sys_accept4+0x53/0x90 net/socket.c:1809
 __do_sys_accept4 net/socket.c:1821 [inline]
 __se_sys_accept4 net/socket.c:1818 [inline]
 __x64_sys_accept4+0x93/0xf0 net/socket.c:1818
 do_syscall_64+0xf6/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4445c9
Code: e8 0c 0d 03 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffc35b37608 EFLAGS: 00000246 ORIG_RAX: 0000000000000120
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00000000004445c9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000306777 R09: 0000000000306777
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00000000004053d0 R14: 0000000000000000 R15: 0000000000000000

Fixes: d752a4986532 ("net: memcg: late association of sock to memcg")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: memcg: late association of sock to memcg

[ Upstream commit d752a4986532cb6305dfd5290a614cde8072769d ]

If a TCP socket is allocated in IRQ context or cloned from unassociated
(i.e. not associated to a memcg) in IRQ context then it will remain
unassociated for its whole life. Almost half of the TCPs created on the
system are created in IRQ context, so, memory used by such sockets will
not be accounted by the memcg.

This issue is more widespread in cgroup v1 where network memory
accounting is opt-in but it can happen in cgroup v2 if the source socket
for the cloning was created in root memcg.

To fix the issue, just do the association of the sockets at the accept()
time in the process context and then force charge the memory buffer
already used and reserved by the socket.

Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: memcg: net: do not associate sock with unrelated cgroup

[ Upstream commit e876ecc67db80dfdb8e237f71e5b43bb88ae549c ]

We are testing network memory accounting in our setup and noticed
inconsistent network memory usage and often unrelated cgroups network
usage correlates with testing workload. On further inspection, it
seems like mem_cgroup_sk_alloc() and cgroup_sk_alloc() are broken in
irq context specially for cgroup v1.

mem_cgroup_sk_alloc() and cgroup_sk_alloc() can be called in irq context
and kind of assumes that this can only happen from sk_clone_lock()
and the source sock object has already associated cgroup. However in
cgroup v1, where network memory accounting is opt-in, the source sock
can be unassociated with any cgroup and the new cloned sock can get
associated with unrelated interrupted cgroup.

Cgroup v2 can also suffer if the source sock object was created by
process in the root cgroup or if sk_alloc() is called in irq context.
The fix is to just do nothing in interrupt.

WARNING: Please note that about half of the TCP sockets are allocated
from the IRQ context, so, memory used by such sockets will not be
accouted by the memcg.

The stack trace of mem_cgroup_sk_alloc() from IRQ-context:

CPU: 70 PID: 12720 Comm: ssh Tainted:  5.6.0-smp-DEV #1
Hardware name: ...
Call Trace:
 <IRQ>
 dump_stack+0x57/0x75
 mem_cgroup_sk_alloc+0xe9/0xf0
 sk_clone_lock+0x2a7/0x420
 inet_csk_clone_lock+0x1b/0x110
 tcp_create_openreq_child+0x23/0x3b0
 tcp_v6_syn_recv_sock+0x88/0x730
 tcp_check_req+0x429/0x560
 tcp_v6_rcv+0x72d/0xa40
 ip6_protocol_deliver_rcu+0xc9/0x400
 ip6_input+0x44/0xd0
 ? ip6_protocol_deliver_rcu+0x400/0x400
 ip6_rcv_finish+0x71/0x80
 ipv6_rcv+0x5b/0xe0
 ? ip6_sublist_rcv+0x2e0/0x2e0
 process_backlog+0x108/0x1e0
 net_rx_action+0x26b/0x460
 __do_softirq+0x104/0x2a6
 do_softirq_own_stack+0x2a/0x40
 </IRQ>
 do_softirq.part.19+0x40/0x50
 __local_bh_enable_ip+0x51/0x60
 ip6_finish_output2+0x23d/0x520
 ? ip6table_mangle_hook+0x55/0x160
 __ip6_finish_output+0xa1/0x100
 ip6_finish_output+0x30/0xd0
 ip6_output+0x73/0x120
 ? __ip6_finish_output+0x100/0x100
 ip6_xmit+0x2e3/0x600
 ? ipv6_anycast_cleanup+0x50/0x50
 ? inet6_csk_route_socket+0x136/0x1e0
 ? skb_free_head+0x1e/0x30
 inet6_csk_xmit+0x95/0xf0
 __tcp_transmit_skb+0x5b4/0xb20
 __tcp_send_ack.part.60+0xa3/0x110
 tcp_send_ack+0x1d/0x20
 tcp_rcv_state_process+0xe64/0xe80
 ? tcp_v6_connect+0x5d1/0x5f0
 tcp_v6_do_rcv+0x1b1/0x3f0
 ? tcp_v6_do_rcv+0x1b1/0x3f0
 __release_sock+0x7f/0xd0
 release_sock+0x30/0xa0
 __inet_stream_connect+0x1c3/0x3b0
 ? prepare_to_wait+0xb0/0xb0
 inet_stream_connect+0x3b/0x60
 __sys_connect+0x101/0x120
 ? __sys_getsockopt+0x11b/0x140
 __x64_sys_connect+0x1a/0x20
 do_syscall_64+0x51/0x200
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

The stack trace of mem_cgroup_sk_alloc() from IRQ-context:
Fixes: 2d7580738345 ("mm: memcontrol: consolidate cgroup socket tracking")
Fixes: d979a39d7242 ("cgroup: duplicate cgroup reference when cloning sockets")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: fix error handling when flashing from file

[ Upstream commit 22630e28f9c2b55abd217869cc0696def89f2284 ]

After bnxt_hwrm_do_send_message() was updated to return standard error
codes in a recent commit, a regression in bnxt_flash_package_from_file()
was introduced.  The return value does not properly reflect all
possible firmware errors when calling firmware to flash the package.

Fix it by consolidating all errors in one local variable rc instead
of having 2 variables for different errors.

Fixes: d4f1420d3656 ("bnxt_en: Convert error code in firmware message response to standard code.")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: reinitialize IRQs when MTU is modified

[ Upstream commit a9b952d267e59a3b405e644930f46d252cea7122 ]

MTU changes may affect the number of IRQs so we must call
bnxt_close_nic()/bnxt_open_nic() with the irq_re_init parameter
set to true.  The reason is that a larger MTU may require
aggregation rings not needed with smaller MTU.  We may not be
able to allocate the required number of aggregation rings and
so we reduce the number of channels which will change the number
of IRQs.  Without this patch, it may crash eventually in
pci_disable_msix() when the IRQs are not properly unwound.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding/alb: make sure arp header is pulled before accessing it

commit b7469e83d2add567e4e0b063963db185f3167cea upstream.

Similar to commit 38f88c454042 ("bonding/alb: properly access headers
in bond_alb_xmit()"), we need to make sure arp header was pulled
in skb->head before blindly accessing it in rlb_arp_xmit().

Remove arp_pkt() private helper, since it is more readable/obvious
to have the following construct back to back :

if (!pskb_network_may_pull(skb, sizeof(*arp)))
return NULL;
arp = (struct arp_pkt *)skb_network_header(skb);

syzbot reported :

BUG: KMSAN: uninit-value in bond_slave_has_mac_rx include/net/bonding.h:704 [inline]
BUG: KMSAN: uninit-value in rlb_arp_xmit drivers/net/bonding/bond_alb.c:662 [inline]
BUG: KMSAN: uninit-value in bond_alb_xmit+0x575/0x25e0 drivers/net/bonding/bond_alb.c:1477
CPU: 0 PID: 12743 Comm: syz-executor.4 Not tainted 5.6.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
 bond_slave_has_mac_rx include/net/bonding.h:704 [inline]
 rlb_arp_xmit drivers/net/bonding/bond_alb.c:662 [inline]
 bond_alb_xmit+0x575/0x25e0 drivers/net/bonding/bond_alb.c:1477
 __bond_start_xmit drivers/net/bonding/bond_main.c:4257 [inline]
 bond_start_xmit+0x85d/0x2f70 drivers/net/bonding/bond_main.c:4282
 __netdev_start_xmit include/linux/netdevice.h:4524 [inline]
 netdev_start_xmit include/linux/netdevice.h:4538 [inline]
 xmit_one net/core/dev.c:3470 [inline]
 dev_hard_start_xmit+0x531/0xab0 net/core/dev.c:3486
 __dev_queue_xmit+0x37de/0x4220 net/core/dev.c:4063
 dev_queue_xmit+0x4b/0x60 net/core/dev.c:4096
 packet_snd net/packet/af_packet.c:2967 [inline]
 packet_sendmsg+0x8347/0x93b0 net/packet/af_packet.c:2992
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg net/socket.c:672 [inline]
 __sys_sendto+0xc1b/0xc50 net/socket.c:1998
 __do_sys_sendto net/socket.c:2010 [inline]
 __se_sys_sendto+0x107/0x130 net/socket.c:2006
 __x64_sys_sendto+0x6e/0x90 net/socket.c:2006
 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45c479
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fc77ffbbc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007fc77ffbc6d4 RCX: 000000000045c479
RDX: 000000000000000e RSI: 00000000200004c0 RDI: 0000000000000003
RBP: 000000000076bf20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 0000000000000a04 R14: 00000000004cc7b0 R15: 000000000076bf2c

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline]
 kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127
 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82
 slab_alloc_node mm/slub.c:2793 [inline]
 __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4401
 __kmalloc_reserve net/core/skbuff.c:142 [inline]
 __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:210
 alloc_skb include/linux/skbuff.h:1051 [inline]
 alloc_skb_with_frags+0x18c/0xa70 net/core/skbuff.c:5766
 sock_alloc_send_pskb+0xada/0xc60 net/core/sock.c:2242
 packet_alloc_skb net/packet/af_packet.c:2815 [inline]
 packet_snd net/packet/af_packet.c:2910 [inline]
 packet_sendmsg+0x66a0/0x93b0 net/packet/af_packet.c:2992
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg net/socket.c:672 [inline]
 __sys_sendto+0xc1b/0xc50 net/socket.c:1998
 __do_sys_sendto net/socket.c:2010 [inline]
 __se_sys_sendto+0x107/0x130 net/socket.c:2006
 __x64_sys_sendto+0x6e/0x90 net/socket.c:2006
 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

taprio: Fix sending packets without dequeueing them

[ Upstream commit b09fe70ef520e011ba4a64f4b93f948a8f14717b ]

There was a bug that was causing packets to be sent to the driver
without first calling dequeue() on the "child" qdisc. And the KASAN
report below shows that sending a packet without calling dequeue()
leads to bad results.

The problem is that when checking the last qdisc "child" we do not set
the returned skb to NULL, which can cause it to be sent to the driver,
and so after the skb is sent, it may be freed, and in some situations a
reference to it may still be in the child qdisc, because it was never
dequeued.

The crash log looks like this:

[   19.937538] ==================================================================
[   19.938300] BUG: KASAN: use-after-free in taprio_dequeue_soft+0x620/0x780
[   19.938968] Read of size 4 at addr ffff8881128628cc by task swapper/1/0
[   19.939612]
[   19.939772] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc3+ #97
[   19.940397] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qe4
[   19.941523] Call Trace:
[   19.941774]  <IRQ>
[   19.941985]  dump_stack+0x97/0xe0
[   19.942323]  print_address_description.constprop.0+0x3b/0x60
[   19.942884]  ? taprio_dequeue_soft+0x620/0x780
[   19.943325]  ? taprio_dequeue_soft+0x620/0x780
[   19.943767]  __kasan_report.cold+0x1a/0x32
[   19.944173]  ? taprio_dequeue_soft+0x620/0x780
[   19.944612]  kasan_report+0xe/0x20
[   19.944954]  taprio_dequeue_soft+0x620/0x780
[   19.945380]  __qdisc_run+0x164/0x18d0
[   19.945749]  net_tx_action+0x2c4/0x730
[   19.946124]  __do_softirq+0x268/0x7bc
[   19.946491]  irq_exit+0x17d/0x1b0
[   19.946824]  smp_apic_timer_interrupt+0xeb/0x380
[   19.947280]  apic_timer_interrupt+0xf/0x20
[   19.947687]  </IRQ>
[   19.947912] RIP: 0010:default_idle+0x2d/0x2d0
[   19.948345] Code: 00 00 41 56 41 55 65 44 8b 2d 3f 8d 7c 7c 41 54 55 53 0f 1f 44 00 00 e8 b1 b2 c5 fd e9 07 00 3
[   19.950166] RSP: 0018:ffff88811a3efda0 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13
[   19.950909] RAX: 0000000080000000 RBX: ffff88811a3a9600 RCX: ffffffff8385327e
[   19.951608] RDX: 1ffff110234752c0 RSI: 0000000000000000 RDI: ffffffff8385262f
[   19.952309] RBP: ffffed10234752c0 R08: 0000000000000001 R09: ffffed10234752c1
[   19.953009] R10: ffffed10234752c0 R11: ffff88811a3a9607 R12: 0000000000000001
[   19.953709] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
[   19.954408]  ? default_idle_call+0x2e/0x70
[   19.954816]  ? default_idle+0x1f/0x2d0
[   19.955192]  default_idle_call+0x5e/0x70
[   19.955584]  do_idle+0x3d4/0x500
[   19.955909]  ? arch_cpu_idle_exit+0x40/0x40
[   19.956325]  ? _raw_spin_unlock_irqrestore+0x23/0x30
[   19.956829]  ? trace_hardirqs_on+0x30/0x160
[   19.957242]  cpu_startup_entry+0x19/0x20
[   19.957633]  start_secondary+0x2a6/0x380
[   19.958026]  ? set_cpu_sibling_map+0x18b0/0x18b0
[   19.958486]  secondary_startup_64+0xa4/0xb0
[   19.958921]
[   19.959078] Allocated by task 33:
[   19.959412]  save_stack+0x1b/0x80
[   19.959747]  __kasan_kmalloc.constprop.0+0xc2/0xd0
[   19.960222]  kmem_cache_alloc+0xe4/0x230
[   19.960617]  __alloc_skb+0x91/0x510
[   19.960967]  ndisc_alloc_skb+0x133/0x330
[   19.961358]  ndisc_send_ns+0x134/0x810
[   19.961735]  addrconf_dad_work+0xad5/0xf80
[   19.962144]  process_one_work+0x78e/0x13a0
[   19.962551]  worker_thread+0x8f/0xfa0
[   19.962919]  kthread+0x2ba/0x3b0
[   19.963242]  ret_from_fork+0x3a/0x50
[   19.963596]
[   19.963753] Freed by task 33:
[   19.964055]  save_stack+0x1b/0x80
[   19.964386]  __kasan_slab_free+0x12f/0x180
[   19.964830]  kmem_cache_free+0x80/0x290
[   19.965231]  ip6_mc_input+0x38a/0x4d0
[   19.965617]  ipv6_rcv+0x1a4/0x1d0
[   19.965948]  __netif_receive_skb_one_core+0xf2/0x180
[   19.966437]  netif_receive_skb+0x8c/0x3c0
[   19.966846]  br_handle_frame_finish+0x779/0x1310
[   19.967302]  br_handle_frame+0x42a/0x830
[   19.967694]  __netif_receive_skb_core+0xf0e/0x2a90
[   19.968167]  __netif_receive_skb_one_core+0x96/0x180
[   19.968658]  process_backlog+0x198/0x650
[   19.969047]  net_rx_action+0x2fa/0xaa0
[   19.969420]  __do_softirq+0x268/0x7bc
[   19.969785]
[   19.969940] The buggy address belongs to the object at ffff888112862840
[   19.969940]  which belongs to the cache skbuff_head_cache of size 224
[   19.971202] The buggy address is located 140 bytes inside of
[   19.971202]  224-byte region [ffff888112862840, ffff888112862920)
[   19.972344] The buggy address belongs to the page:
[   19.972820] page:ffffea00044a1800 refcount:1 mapcount:0 mapping:ffff88811a2bd1c0 index:0xffff8881128625c0 compo0
[   19.973930] flags: 0x8000000000010200(slab|head)
[   19.974388] raw: 8000000000010200 ffff88811a2ed650 ffff88811a2ed650 ffff88811a2bd1c0
[   19.975151] raw: ffff8881128625c0 0000000000190013 00000001ffffffff 0000000000000000
[   19.975915] page dumped because: kasan: bad access detected
[   19.976461] page_owner tracks the page as allocated
[   19.976946] page last allocated via order 2, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NO)
[   19.978332]  prep_new_page+0x24b/0x330
[   19.978707]  get_page_from_freelist+0x2057/0x2c90
[   19.979170]  __alloc_pages_nodemask+0x218/0x590
[   19.979619]  new_slab+0x9d/0x300
[   19.979948]  ___slab_alloc.constprop.0+0x2f9/0x6f0
[   19.980421]  __slab_alloc.constprop.0+0x30/0x60
[   19.980870]  kmem_cache_alloc+0x201/0x230
[   19.981269]  __alloc_skb+0x91/0x510
[   19.981620]  alloc_skb_with_frags+0x78/0x4a0
[   19.982043]  sock_alloc_send_pskb+0x5eb/0x750
[   19.982476]  unix_stream_sendmsg+0x399/0x7f0
[   19.982904]  sock_sendmsg+0xe2/0x110
[   19.983262]  ____sys_sendmsg+0x4de/0x6d0
[   19.983660]  ___sys_sendmsg+0xe4/0x160
[   19.984032]  __sys_sendmsg+0xab/0x130
[   19.984396]  do_syscall_64+0xe7/0xae0
[   19.984761] page last free stack trace:
[   19.985142]  __free_pages_ok+0x432/0xbc0
[   19.985533]  qlist_free_all+0x56/0xc0
[   19.985907]  quarantine_reduce+0x149/0x170
[   19.986315]  __kasan_kmalloc.constprop.0+0x9e/0xd0
[   19.986791]  kmem_cache_alloc+0xe4/0x230
[   19.987182]  prepare_creds+0x24/0x440
[   19.987548]  do_faccessat+0x80/0x590
[   19.987906]  do_syscall_64+0xe7/0xae0
[   19.988276]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   19.988775]
[   19.988930] Memory state around the buggy address:
[   19.989402]  ffff888112862780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   19.990111]  ffff888112862800: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
[   19.990822] >ffff888112862880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   19.991529]                                               ^
[   19.992081]  ffff888112862900: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
[   19.992796]  ffff888112862980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler")
Reported-by: Michael Schmidt <michael.schmidt@eti.uni-siegen.de>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

slip: make slhc_compress() more robust against malicious packets

[ Upstream commit 110a40dfb708fe940a3f3704d470e431c368d256 ]

Before accessing various fields in IPV4 network header
and TCP header, make sure the packet :

- Has IP version 4 (ip->version == 4)
- Has not a silly network length (ip->ihl >= 5)
- Is big enough to hold network and transport headers
- Has not a silly TCP header size (th->doff >= sizeof(struct tcphdr) / 4)

syzbot reported :

BUG: KMSAN: uninit-value in slhc_compress+0x5b9/0x2e60 drivers/net/slip/slhc.c:270
CPU: 0 PID: 11728 Comm: syz-executor231 Not tainted 5.6.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
 slhc_compress+0x5b9/0x2e60 drivers/net/slip/slhc.c:270
 ppp_send_frame drivers/net/ppp/ppp_generic.c:1637 [inline]
 __ppp_xmit_process+0x1902/0x2970 drivers/net/ppp/ppp_generic.c:1495
 ppp_xmit_process+0x147/0x2f0 drivers/net/ppp/ppp_generic.c:1516
 ppp_write+0x6bb/0x790 drivers/net/ppp/ppp_generic.c:512
 do_loop_readv_writev fs/read_write.c:717 [inline]
 do_iter_write+0x812/0xdc0 fs/read_write.c:1000
 compat_writev+0x2df/0x5a0 fs/read_write.c:1351
 do_compat_pwritev64 fs/read_write.c:1400 [inline]
 __do_compat_sys_pwritev fs/read_write.c:1420 [inline]
 __se_compat_sys_pwritev fs/read_write.c:1414 [inline]
 __ia32_compat_sys_pwritev+0x349/0x3f0 fs/read_write.c:1414
 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline]
 do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410
 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139
RIP: 0023:0xf7f7cd99
Code: 90 e8 0b 00 00 00 f3 90 0f ae e8 eb f9 8d 74 26 00 89 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 002b:00000000ffdb84ac EFLAGS: 00000217 ORIG_RAX: 000000000000014e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00000000200001c0
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 0000000040047459 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline]
 kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127
 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82
 slab_alloc_node mm/slub.c:2793 [inline]
 __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4401
 __kmalloc_reserve net/core/skbuff.c:142 [inline]
 __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:210
 alloc_skb include/linux/skbuff.h:1051 [inline]
 ppp_write+0x115/0x790 drivers/net/ppp/ppp_generic.c:500
 do_loop_readv_writev fs/read_write.c:717 [inline]
 do_iter_write+0x812/0xdc0 fs/read_write.c:1000
 compat_writev+0x2df/0x5a0 fs/read_write.c:1351
 do_compat_pwritev64 fs/read_write.c:1400 [inline]
 __do_compat_sys_pwritev fs/read_write.c:1420 [inline]
 __se_compat_sys_pwritev fs/read_write.c:1414 [inline]
 __ia32_compat_sys_pwritev+0x349/0x3f0 fs/read_write.c:1414
 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline]
 do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410
 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139

Fixes: b5451d783ade ("slip: Move the SLIP drivers")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sfc: detach from cb_page in efx_copy_channel()

[ Upstream commit 4b1bd9db078f7d5332c8601a2f5bd43cf0458fd4 ]

It's a resource, not a parameter, so we can't copy it into the new
 channel's TX queues, otherwise aliasing will lead to resource-
 management bugs if the channel is subsequently torn down without
 being initialised.

Before the Fixes:-tagged commit there was a similar bug with
 tsoh_page, but I'm not sure it's worth doing another fix for such
 old kernels.

Fixes: e9117e5099ea ("sfc: Firmware-Assisted TSO version 2")
Suggested-by: Derek Shute <Derek.Shute@stratus.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8152: check disconnect status after long sleep

[ Upstream commit d64c7a08034b32c285e576208ae44fc3ba3fa7df ]

Dell USB Type C docking WD19/WD19DC attaches additional peripherals as:

  /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
      |__ Port 1: Dev 11, If 0, Class=Hub, Driver=hub/4p, 5000M
          |__ Port 3: Dev 12, If 0, Class=Hub, Driver=hub/4p, 5000M
          |__ Port 4: Dev 13, If 0, Class=Vendor Specific Class,
              Driver=r8152, 5000M

where usb 2-1-3 is a hub connecting all USB Type-A/C ports on the dock.

When hotplugging such dock with additional usb devices already attached on
it, the probing process may reset usb 2.1 port, therefore r8152 ethernet
device is also reset. However, during r8152 device init there are several
for-loops that, when it's unable to retrieve hardware registers due to
being disconnected from USB, may take up to 14 seconds each in practice,
and that has to be completed before USB may re-enumerate devices on the
bus. As a result, devices attached to the dock will only be available
after nearly 1 minute after the dock was plugged in:

  [ 216.388290] [250] r8152 2-1.4:1.0: usb_probe_interface
  [ 216.388292] [250] r8152 2-1.4:1.0: usb_probe_interface - got id
  [ 258.830410] r8152 2-1.4:1.0 (unnamed net_device) (uninitialized): PHY not ready
  [ 258.830460] r8152 2-1.4:1.0 (unnamed net_device) (uninitialized): Invalid header when reading pass-thru MAC addr
  [ 258.830464] r8152 2-1.4:1.0 (unnamed net_device) (uninitialized): Get ether addr fail

This happens in, for example, r8153_init:

  static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size,
    void *data, u16 type)
  {
    if (test_bit(RTL8152_UNPLUG, &tp->flags))
      return -ENODEV;
    ...
  }

  static u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index)
  {
    u32 data;
    ...
    generic_ocp_read(tp, index, sizeof(tmp), &tmp, type | byen);

    data = __le32_to_cpu(tmp);
    ...
    return (u16)data;
  }

  static void r8153_init(struct r8152 *tp)
  {
    ...
    if (test_bit(RTL8152_UNPLUG, &tp->flags))
      return;

    for (i = 0; i < 500; i++) {
      if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
          AUTOLOAD_DONE)
        break;
      msleep(20);
    }
    ...
  }

Since ocp_read_word() doesn't check the return status of
generic_ocp_read(), and the only exit condition for the loop is to have
a match in the returned value, such loops will only ends after exceeding
its maximum runs when the device has been marked as disconnected, which
takes 500 * 20ms = 10 seconds in theory, 14 in practice.

To solve this long latency another test to RTL8152_UNPLUG flag should be
added after those 20ms sleep to skip unnecessary loops, so that the device
probe can complete early and proceed to parent port reset/reprobe process.

This can be reproduced on all kernel versions up to latest v5.6-rc2, but
after v5.5-rc7 the reproduce rate is dramatically lowered to 1/30 or less
while it was around 1/2.

Signed-off-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: systemport: fix index check to avoid an array out of bounds access

[ Upstream commit c0368595c1639947839c0db8294ee96aca0b3b86 ]

Currently the bounds check on index is off by one and can lead to
an out of bounds access on array priv->filters_loc when index is
RXCHK_BRCM_TAG_MAX.

Fixes: bb9051a2b230 ("net: systemport: Add support for WAKE_FILTER")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: dwmac1000: Disable ACS if enhanced descs are not used

[ Upstream commit b723bd933980f4956dabc8a8d84b3e83be8d094c ]

ACS (auto PAD/FCS stripping) removes FCS off 802.3 packets (LLC) so that
there is no need to manually strip it for such packets. The enhanced DMA
descriptors allow to flag LLC packets so that the receiving callback can
use that to strip FCS manually or not. On the other hand, normal
descriptors do not support that.

Thus in order to not truncate LLC packet ACS should be disabled when
using normal DMA descriptors.

Fixes: 47dd7a540b8a0 ("net: add support for STMicroelectronics Ethernet controllers.")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: bcm63xx: fix OOPS due to missing driver name

[ Upstream commit 43de81b0601df7d7988d3f5617ee0987df65c883 ]

719655a14971 ("net: phy: Replace phy driver features u32 with link_mode
bitmap") was a bit over-eager and also removed the second phy driver's
name, resulting in a nasty OOPS on registration:

[    1.319854] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 804dd50c, ra == 804dd4f0
[    1.330859] Oops[#1]:
[    1.333138] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.22 #0
[    1.339217] $ 0   : 00000000 00000001 87ca7f00 805c1874
[    1.344590] $ 4   : 00000000 00000047 00585000 8701f800
[    1.349965] $ 8   : 8701f800 804f4a5c 00000003 64726976
[    1.355341] $12   : 00000001 00000000 00000000 00000114
[    1.360718] $16   : 87ca7f80 00000000 00000000 80639fe4
[    1.366093] $20   : 00000002 00000000 806441d0 80b90000
[    1.371470] $24   : 00000000 00000000
[    1.376847] $28   : 87c1e000 87c1fda0 80b90000 804dd4f0
[    1.382224] Hi    : d1c8f8da
[    1.385180] Lo    : 5518a480
[    1.388182] epc   : 804dd50c kset_find_obj+0x3c/0x114
[    1.393345] ra    : 804dd4f0 kset_find_obj+0x20/0x114
[    1.398530] Status: 10008703 KERNEL EXL IE
[    1.402833] Cause : 00800008 (ExcCode 02)
[    1.406952] BadVA : 00000000
[    1.409913] PrId  : 0002a075 (Broadcom BMIPS4350)
[    1.414745] Modules linked in:
[    1.417895] Process swapper/0 (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000)
[    1.426214] Stack : 87cec000 80630000 80639370 80640658 80640000 80049af4 80639fe4 8063a0d8
[    1.434816]         8063a0d8 802ef078 00000002 00000000 806441d0 80b90000 8063a0d8 802ef114
[    1.443417]         87cea0de 87c1fde0 00000000 804de488 87cea000 8063a0d8 8063a0d8 80334e48
[    1.452018]         80640000 8063984c 80639bf4 00000000 8065de48 00000001 8063a0d8 80334ed0
[    1.460620]         806441d0 80b90000 80b90000 802ef164 8065dd70 80620000 80b90000 8065de58
[    1.469222]         ...
[    1.471734] Call Trace:
[    1.474255] [<804dd50c>] kset_find_obj+0x3c/0x114
[    1.479141] [<802ef078>] driver_find+0x1c/0x44
[    1.483665] [<802ef114>] driver_register+0x74/0x148
[    1.488719] [<80334e48>] phy_driver_register+0x9c/0xd0
[    1.493968] [<80334ed0>] phy_drivers_register+0x54/0xe8
[    1.499345] [<8001061c>] do_one_initcall+0x7c/0x1f4
[    1.504374] [<80644ed8>] kernel_init_freeable+0x1d4/0x2b4
[    1.509940] [<804f4e24>] kernel_init+0x10/0xf8
[    1.514502] [<80018e68>] ret_from_kernel_thread+0x14/0x1c
[    1.520040] Code: 1060000c  02202025  90650000 <90810000> 24630001  14250004  24840001  14a0fffb  90650000
[    1.530061]
[    1.531698] ---[ end trace d52f1717cd29bdc8 ]---

Fix it by readding the name.

Fixes: 719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/packet: tpacket_rcv: do not increment ring index on drop

[ Upstream commit 46e4c421a053c36bf7a33dda2272481bcaf3eed3 ]

In one error case, tpacket_rcv drops packets after incrementing the
ring producer index.

If this happens, it does not update tp_status to TP_STATUS_USER and
thus the reader is stalled for an iteration of the ring, causing out
of order arrival.

The only such error path is when virtio_net_hdr_from_skb fails due
to encountering an unknown GSO type.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: nfc: fix bounds checking bugs on "pipe"

[ Upstream commit a3aefbfe45751bf7b338c181b97608e276b5bb73 ]

This is similar to commit 674d9de02aa7 ("NFC: Fix possible memory
corruption when handling SHDLC I-Frame commands") and commit d7ee81ad09f0
("NFC: nci: Add some bounds checking in nci_hci_cmd_received()") which
added range checks on "pipe".

The "pipe" variable comes skb->data[0] in nfc_hci_msg_rx_work().
It's in the 0-255 range.  We're using it as the array index into the
hdev->pipes[] array which has NFC_HCI_MAX_PIPES (128) members.

Fixes: 118278f20aa8 ("NFC: hci: Add pipes table to reference them with a tuple {gate, host}")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: macsec: update SCI upon MAC address change.

[ Upstream commit 6fc498bc82929ee23aa2f35a828c6178dfd3f823 ]

SCI should be updated, because it contains MAC in its first 6 octets.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlink: Use netlink header as base to calculate bad attribute offset

[ Upstream commit 84b3268027641401bb8ad4427a90a3cce2eb86f5 ]

Userspace might send a batch that is composed of several netlink
messages. The netlink_ack() function must use the pointer to the netlink
header as base to calculate the bad attribute offset.

Fixes: 2d4bc93368f5 ("netlink: extended ACK reporting")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/ipv6: use configured metric when add peer route

[ Upstream commit 07758eb9ff52794fba15d03aa88d92dbd1b7d125 ]

When we add peer address with metric configured, IPv4 could set the dest
metric correctly, but IPv6 do not. e.g.

]# ip addr add 192.0.2.1 peer 192.0.2.2/32 dev eth1 metric 20
]# ip route show dev eth1
192.0.2.2 proto kernel scope link src 192.0.2.1 metric 20
]# ip addr add 2001:db8::1 peer 2001:db8::2/128 dev eth1 metric 20
]# ip -6 route show dev eth1
2001:db8::1 proto kernel metric 20 pref medium
2001:db8::2 proto kernel metric 256 pref medium

Fix this by using configured metric instead of default one.

Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: 8308f3ff1753 ("net/ipv6: Add support for specifying metric of connected routes")
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hns3: fix a not link up issue when fibre port supports autoneg

[ Upstream commit 68e1006f618e509fc7869259fe83ceec4a95dac3 ]

When fibre port supports auto-negotiation, the IMP(Intelligent
Management Process) processes the speed of auto-negotiation
and the  user's speed separately.
For below case, the port will get a not link up problem.
step 1: disables auto-negotiation and sets speed to A, then
the driver's MAC speed will be updated to A.
step 2: enables auto-negotiation and MAC gets negotiated
speed B, then the driver's MAC speed will be updated to B
through querying in periodical task.
step 3: MAC gets new negotiated speed A.
step 4: disables auto-negotiation and sets speed to B before
periodical task query new MAC speed A, the driver will  ignore
the speed configuration.

This patch fixes it by skipping speed and duplex checking when
fibre port supports auto-negotiation.

Fixes: 22f48e24a23d ("net: hns3: add autoneg and change speed support for fibre port")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fec: validate the new settings in fec_enet_set_coalesce()

[ Upstream commit ab14961d10d02d20767612c78ce148f6eb85bd58 ]

fec_enet_set_coalesce() validates the previously set params
and if they are within range proceeds to apply the new ones.
The new ones, however, are not validated. This seems backwards,
probably a copy-paste error?

Compile tested only.

Fixes: d851b47b22fc ("net: fec: add interrupt coalescence feature support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: mv88e6xxx: fix lockup on warm boot

[ Upstream commit 0395823b8d9a4d87bd1bf74359123461c2ae801b ]

If the switch is not hardware reset on a warm boot, interrupts can be
left enabled, and possibly pending. This will cause us to enter an
infinite loop trying to service an interrupt we are unable to handle,
thereby preventing the kernel from booting.

Ensure that the global 2 interrupt sources are disabled before we claim
the parent interrupt.

Observed on the ZII development revision B and C platforms with
reworked serdes support, and using reboot -f to reboot the platform.

Fixes: dc30c35be720 ("net: dsa: mv88e6xxx: Implement interrupt support.")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: fix phylink_start()/phylink_stop() calls

[ Upstream commit 8640f8dc6d657ebfb4e67c202ad32c5457858a13 ]

Place phylink_start()/phylink_stop() inside dsa_port_enable() and
dsa_port_disable(), which ensures that we call phylink_stop() before
tearing down phylink - which is a documented requirement.  Failure
to do so can cause use-after-free bugs.

Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macvlan: add cond_resched() during multicast processing

[ Upstream commit ce9a4186f9ac475c415ffd20348176a4ea366670 ]

The Rx bound multicast packets are deferred to a workqueue and
macvlan can also suffer from the same attack that was discovered
by Syzbot for IPvlan. This solution is not as effective as in
IPvlan. IPvlan defers all (Tx and Rx) multicast packet processing
to a workqueue while macvlan does this way only for the Rx. This
fix should address the Rx codition to certain extent.

Tx is still suseptible. Tx multicast processing happens when
.ndo_start_xmit is called, hence we cannot add cond_resched().
However, it's not that severe since the user which is generating
 / flooding will be affected the most.

Fixes: 412ca1550cbe ("macvlan: Move broadcasts into a work queue")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipvlan: don't deref eth hdr before checking it's set

[ Upstream commit ad8192767c9f9cf97da57b9ffcea70fb100febef ]

IPvlan in L3 mode discards outbound multicast packets but performs
the check before ensuring the ether-header is set or not. This is
an error that Eric found through code browsing.

Fixes: 2ad7bf363841 (“ipvlan: Initial check-in of the IPVLAN driver.”)
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipvlan: do not use cond_resched_rcu() in ipvlan_process_multicast()

[ Upstream commit afe207d80a61e4d6e7cfa0611a4af46d0ba95628 ]

Commit e18b353f102e ("ipvlan: add cond_resched_rcu() while
processing muticast backlog") added a cond_resched_rcu() in a loop
using rcu protection to iterate over slaves.

This is breaking rcu rules, so lets instead use cond_resched()
at a point we can reschedule

Fixes: e18b353f102e ("ipvlan: add cond_resched_rcu() while processing muticast backlog")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipvlan: do not add hardware address of master to its unicast filter list

[ Upstream commit 63aae7b17344d4b08a7d05cb07044de4c0f9dcc6 ]

There is a problem when ipvlan slaves are created on a master device that
is a vmxnet3 device (ipvlan in VMware guests). The vmxnet3 driver does not
support unicast address filtering. When an ipvlan device is brought up in
ipvlan_open(), the ipvlan driver calls dev_uc_add() to add the hardware
address of the vmxnet3 master device to the unicast address list of the
master device, phy_dev->uc. This inevitably leads to the vmxnet3 master
device being forced into promiscuous mode by __dev_set_rx_mode().

Promiscuous mode is switched on the master despite the fact that there is
still only one hardware address that the master device should use for
filtering in order for the ipvlan device to be able to receive packets.
The comment above struct net_device describes the uc_promisc member as a
"counter, that indicates, that promiscuous mode has been enabled due to
the need to listen to additional unicast addresses in a device that does
not implement ndo_set_rx_mode()". Moreover, the design of ipvlan
guarantees that only the hardware address of a master device,
phy_dev->dev_addr, will be used to transmit and receive all packets from
its ipvlan slaves. Thus, the unicast address list of the master device
should not be modified by ipvlan_open() and ipvlan_stop() in order to make
ipvlan a workable option on masters that do not support unicast address
filtering.

Fixes: 2ad7bf3638411 ("ipvlan: Initial check-in of the IPVLAN driver")
Reported-by: Per Sundstrom <per.sundstrom@redqube.se>
Signed-off-by: Jiri Wiesner <jwiesner@suse.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipvlan: add cond_resched_rcu() while processing muticast backlog

[ Upstream commit e18b353f102e371580f3f01dd47567a25acc3c1d ]

If there are substantial number of slaves created as simulated by
Syzbot, the backlog processing could take much longer and result
into the issue found in the Syzbot report.

INFO: rcu_sched detected stalls on CPUs/tasks:
        (detected by 1, t=10502 jiffies, g=5049, c=5048, q=752)
All QSes seen, last rcu_sched kthread activity 10502 (4294965563-4294955061), jiffies_till_next_fqs=1, root ->qsmask 0x0
syz-executor.1  R  running task on cpu   1  10984 11210   3866 0x30020008 179034491270
Call Trace:
 <IRQ>
 [<ffffffff81497163>] _sched_show_task kernel/sched/core.c:8063 [inline]
 [<ffffffff81497163>] _sched_show_task.cold+0x2fd/0x392 kernel/sched/core.c:8030
 [<ffffffff8146a91b>] sched_show_task+0xb/0x10 kernel/sched/core.c:8073
 [<ffffffff815c931b>] print_other_cpu_stall kernel/rcu/tree.c:1577 [inline]
 [<ffffffff815c931b>] check_cpu_stall kernel/rcu/tree.c:1695 [inline]
 [<ffffffff815c931b>] __rcu_pending kernel/rcu/tree.c:3478 [inline]
 [<ffffffff815c931b>] rcu_pending kernel/rcu/tree.c:3540 [inline]
 [<ffffffff815c931b>] rcu_check_callbacks.cold+0xbb4/0xc29 kernel/rcu/tree.c:2876
 [<ffffffff815e3962>] update_process_times+0x32/0x80 kernel/time/timer.c:1635
 [<ffffffff816164f0>] tick_sched_handle+0xa0/0x180 kernel/time/tick-sched.c:161
 [<ffffffff81616ae4>] tick_sched_timer+0x44/0x130 kernel/time/tick-sched.c:1193
 [<ffffffff815e75f7>] __run_hrtimer kernel/time/hrtimer.c:1393 [inline]
 [<ffffffff815e75f7>] __hrtimer_run_queues+0x307/0xd90 kernel/time/hrtimer.c:1455
 [<ffffffff815e90ea>] hrtimer_interrupt+0x2ea/0x730 kernel/time/hrtimer.c:1513
 [<ffffffff844050f4>] local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1031 [inline]
 [<ffffffff844050f4>] smp_apic_timer_interrupt+0x144/0x5e0 arch/x86/kernel/apic/apic.c:1056
 [<ffffffff84401cbe>] apic_timer_interrupt+0x8e/0xa0 arch/x86/entry/entry_64.S:778
RIP: 0010:do_raw_read_lock+0x22/0x80 kernel/locking/spinlock_debug.c:153
RSP: 0018:ffff8801dad07ab8 EFLAGS: 00000a02 ORIG_RAX: ffffffffffffff12
RAX: 0000000000000000 RBX: ffff8801c4135680 RCX: 0000000000000000
RDX: 1ffff10038826afe RSI: ffff88019d816bb8 RDI: ffff8801c41357f0
RBP: ffff8801dad07ac0 R08: 0000000000004b15 R09: 0000000000310273
R10: ffff88019d816bb8 R11: 0000000000000001 R12: ffff8801c41357e8
R13: 0000000000000000 R14: ffff8801cfb19850 R15: ffff8801cfb198b0
 [<ffffffff8101460e>] __raw_read_lock_bh include/linux/rwlock_api_smp.h:177 [inline]
 [<ffffffff8101460e>] _raw_read_lock_bh+0x3e/0x50 kernel/locking/spinlock.c:240
 [<ffffffff840d78ca>] ipv6_chk_mcast_addr+0x11a/0x6f0 net/ipv6/mcast.c:1006
 [<ffffffff84023439>] ip6_mc_input+0x319/0x8e0 net/ipv6/ip6_input.c:482
 [<ffffffff840211c8>] dst_input include/net/dst.h:449 [inline]
 [<ffffffff840211c8>] ip6_rcv_finish+0x408/0x610 net/ipv6/ip6_input.c:78
 [<ffffffff840214de>] NF_HOOK include/linux/netfilter.h:292 [inline]
 [<ffffffff840214de>] NF_HOOK include/linux/netfilter.h:286 [inline]
 [<ffffffff840214de>] ipv6_rcv+0x10e/0x420 net/ipv6/ip6_input.c:278
 [<ffffffff83a29efa>] __netif_receive_skb_one_core+0x12a/0x1f0 net/core/dev.c:5303
 [<ffffffff83a2a15c>] __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:5417
 [<ffffffff83a2f536>] process_backlog+0x216/0x6c0 net/core/dev.c:6243
 [<ffffffff83a30d1b>] napi_poll net/core/dev.c:6680 [inline]
 [<ffffffff83a30d1b>] net_rx_action+0x47b/0xfb0 net/core/dev.c:6748
 [<ffffffff846002c8>] __do_softirq+0x2c8/0x99a kernel/softirq.c:317
 [<ffffffff813e656a>] invoke_softirq kernel/softirq.c:399 [inline]
 [<ffffffff813e656a>] irq_exit+0x16a/0x1a0 kernel/softirq.c:439
 [<ffffffff84405115>] exiting_irq arch/x86/include/asm/apic.h:561 [inline]
 [<ffffffff84405115>] smp_apic_timer_interrupt+0x165/0x5e0 arch/x86/kernel/apic/apic.c:1058
 [<ffffffff84401cbe>] apic_timer_interrupt+0x8e/0xa0 arch/x86/entry/entry_64.S:778
 </IRQ>
RIP: 0010:__sanitizer_cov_trace_pc+0x26/0x50 kernel/kcov.c:102
RSP: 0018:ffff880196033bd8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff12
RAX: ffff88019d8161c0 RBX: 00000000ffffffff RCX: ffffc90003501000
RDX: 0000000000000002 RSI: ffffffff816236d1 RDI: 0000000000000005
RBP: ffff880196033bd8 R08: ffff88019d8161c0 R09: 0000000000000000
R10: 1ffff10032c067f0 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000000
 [<ffffffff816236d1>] do_futex+0x151/0x1d50 kernel/futex.c:3548
 [<ffffffff816260f0>] C_SYSC_futex kernel/futex_compat.c:201 [inline]
 [<ffffffff816260f0>] compat_SyS_futex+0x270/0x3b0 kernel/futex_compat.c:175
 [<ffffffff8101da17>] do_syscall_32_irqs_on arch/x86/entry/common.c:353 [inline]
 [<ffffffff8101da17>] do_fast_syscall_32+0x357/0xe1c arch/x86/entry/common.c:415
 [<ffffffff84401a9b>] entry_SYSENTER_compat+0x8b/0x9d arch/x86/entry/entry_64_compat.S:139
RIP: 0023:0xf7f23c69
RSP: 002b:00000000f5d1f12c EFLAGS: 00000282 ORIG_RAX: 00000000000000f0
RAX: ffffffffffffffda RBX: 000000000816af88 RCX: 0000000000000080
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000816af8c
RBP: 00000000f5d1f228 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
rcu_sched kthread starved for 10502 jiffies! g5049 c5048 f0x2 RCU_GP_WAIT_FQS(3) ->state=0x0 ->cpu=1
rcu_sched       R  running task on cpu   1  13048     8      2 0x90000000 179099587640
Call Trace:
 [<ffffffff8147321f>] context_switch+0x60f/0xa60 kernel/sched/core.c:3209
 [<ffffffff8100095a>] __schedule+0x5aa/0x1da0 kernel/sched/core.c:3934
 [<ffffffff810021df>] schedule+0x8f/0x1b0 kernel/sched/core.c:4011
 [<ffffffff8101116d>] schedule_timeout+0x50d/0xee0 kernel/time/timer.c:1803
 [<ffffffff815c13f1>] rcu_gp_kthread+0xda1/0x3b50 kernel/rcu/tree.c:2327
 [<ffffffff8144b318>] kthread+0x348/0x420 kernel/kthread.c:246
 [<ffffffff84400266>] ret_from_fork+0x56/0x70 arch/x86/entry/entry_64.S:393

Fixes: ba35f8588f47 (“ipvlan: Defer multicast / broadcast processing to a work-queue”)
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6/addrconf: call ipv6_mc_up() for non-Ethernet interface

[ Upstream commit 60380488e4e0b95e9e82aa68aa9705baa86de84c ]

Rafał found an issue that for non-Ethernet interface, if we down and up
frequently, the memory will be consumed slowly.

The reason is we add allnodes/allrouters addressed in multicast list in
ipv6_add_dev(). When link down, we call ipv6_mc_down(), store all multicast
addresses via mld_add_delrec(). But when link up, we don't call ipv6_mc_up()
for non-Ethernet interface to remove the addresses. This makes idev->mc_tomb
getting bigger and bigger. The call stack looks like:

addrconf_notify(NETDEV_REGISTER)
ipv6_add_dev
ipv6_dev_mc_inc(ff01::1)
ipv6_dev_mc_inc(ff02::1)
ipv6_dev_mc_inc(ff02::2)

addrconf_notify(NETDEV_UP)
addrconf_dev_config
/* Alas, we support only Ethernet autoconfiguration. */
return;

addrconf_notify(NETDEV_DOWN)
addrconf_ifdown
ipv6_mc_down
igmp6_group_dropped(ff02::2)
mld_add_delrec(ff02::2)
igmp6_group_dropped(ff02::1)
igmp6_group_dropped(ff01::1)

After investigating, I can't found a rule to disable multicast on
non-Ethernet interface. In RFC2460, the link could be Ethernet, PPP, ATM,
tunnels, etc. In IPv4, it doesn't check the dev type when calls ip_mc_up()
in inetdev_event(). Even for IPv6, we don't check the dev type and call
ipv6_add_dev(), ipv6_dev_mc_inc() after register device.

So I think it's OK to fix this memory consumer by calling ipv6_mc_up() for
non-Ethernet interface.

v2: Also check IFF_MULTICAST flag to make sure the interface supports
    multicast

Reported-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>
Fixes: 74235a25c673 ("[IPV6] addrconf: Fix IPv6 on tuntap tunnels")
Fixes: 1666d49e1d41 ("mld: do not remove mld souce list info when set link down")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet_diag: return classid for all socket types

[ Upstream commit 83f73c5bb7b9a9135173f0ba2b1aa00c06664ff9 ]

In commit 1ec17dbd90f8 ("inet_diag: fix reporting cgroup classid and
fallback to priority") croup classid reporting was fixed. But this works
only for TCP sockets because for other socket types icsk parameter can
be NULL and classid code path is skipped. This change moves classid
handling to inet_diag_msg_attrs_fill() function.

Also inet_diag_msg_attrs_size() helper was added and addends in
nlmsg_new() were reordered to save order from inet_sk_diag_fill().

Fixes: 1ec17dbd90f8 ("inet_diag: fix reporting cgroup classid and fallback to priority")
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gre: fix uninit-value in __iptunnel_pull_header

[ Upstream commit 17c25cafd4d3e74c83dce56b158843b19c40b414 ]

syzbot found an interesting case of the kernel reading
an uninit-value [1]

Problem is in the handling of ETH_P_WCCP in gre_parse_header()

We look at the byte following GRE options to eventually decide
if the options are four bytes longer.

Use skb_header_pointer() to not pull bytes if we found
that no more bytes were needed.

All callers of gre_parse_header() are properly using pskb_may_pull()
anyway before proceeding to next header.

[1]
BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2303 [inline]
BUG: KMSAN: uninit-value in __iptunnel_pull_header+0x30c/0xbd0 net/ipv4/ip_tunnel_core.c:94
CPU: 1 PID: 11784 Comm: syz-executor940 Not tainted 5.6.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
 pskb_may_pull include/linux/skbuff.h:2303 [inline]
 __iptunnel_pull_header+0x30c/0xbd0 net/ipv4/ip_tunnel_core.c:94
 iptunnel_pull_header include/net/ip_tunnels.h:411 [inline]
 gre_rcv+0x15e/0x19c0 net/ipv6/ip6_gre.c:606
 ip6_protocol_deliver_rcu+0x181b/0x22c0 net/ipv6/ip6_input.c:432
 ip6_input_finish net/ipv6/ip6_input.c:473 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 ip6_input net/ipv6/ip6_input.c:482 [inline]
 ip6_mc_input+0xdf2/0x1460 net/ipv6/ip6_input.c:576
 dst_input include/net/dst.h:442 [inline]
 ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 ipv6_rcv+0x683/0x710 net/ipv6/ip6_input.c:306
 __netif_receive_skb_one_core net/core/dev.c:5198 [inline]
 __netif_receive_skb net/core/dev.c:5312 [inline]
 netif_receive_skb_internal net/core/dev.c:5402 [inline]
 netif_receive_skb+0x66b/0xf20 net/core/dev.c:5461
 tun_rx_batched include/linux/skbuff.h:4321 [inline]
 tun_get_user+0x6aef/0x6f60 drivers/net/tun.c:1997
 tun_chr_write_iter+0x1f2/0x360 drivers/net/tun.c:2026
 call_write_iter include/linux/fs.h:1901 [inline]
 new_sync_write fs/read_write.c:483 [inline]
 __vfs_write+0xa5a/0xca0 fs/read_write.c:496
 vfs_write+0x44a/0x8f0 fs/read_write.c:558
 ksys_write+0x267/0x450 fs/read_write.c:611
 __do_sys_write fs/read_write.c:623 [inline]
 __se_sys_write fs/read_write.c:620 [inline]
 __ia32_sys_write+0xdb/0x120 fs/read_write.c:620
 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline]
 do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410
 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139
RIP: 0023:0xf7f62d99
Code: 90 e8 0b 00 00 00 f3 90 0f ae e8 eb f9 8d 74 26 00 89 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 002b:00000000fffedb2c EFLAGS: 00000217 ORIG_RAX: 0000000000000004
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000020002580
RDX: 0000000000000fca RSI: 0000000000000036 RDI: 0000000000000004
RBP: 0000000000008914 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline]
 kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127
 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82
 slab_alloc_node mm/slub.c:2793 [inline]
 __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4401
 __kmalloc_reserve net/core/skbuff.c:142 [inline]
 __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:210
 alloc_skb include/linux/skbuff.h:1051 [inline]
 alloc_skb_with_frags+0x18c/0xa70 net/core/skbuff.c:5766
 sock_alloc_send_pskb+0xada/0xc60 net/core/sock.c:2242
 tun_alloc_skb drivers/net/tun.c:1529 [inline]
 tun_get_user+0x10ae/0x6f60 drivers/net/tun.c:1843
 tun_chr_write_iter+0x1f2/0x360 drivers/net/tun.c:2026
 call_write_iter include/linux/fs.h:1901 [inline]
 new_sync_write fs/read_write.c:483 [inline]
 __vfs_write+0xa5a/0xca0 fs/read_write.c:496
 vfs_write+0x44a/0x8f0 fs/read_write.c:558
 ksys_write+0x267/0x450 fs/read_write.c:611
 __do_sys_write fs/read_write.c:623 [inline]
 __se_sys_write fs/read_write.c:620 [inline]
 __ia32_sys_write+0xdb/0x120 fs/read_write.c:620
 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline]
 do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410
 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139

Fixes: 95f5c64c3c13 ("gre: Move utility functions to common headers")
Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup, netclassid: periodically release file_lock on classid updating

[ Upstream commit 018d26fcd12a75fb9b5fe233762aa3f2f0854b88 ]

In our production environment we have faced with problem that updating
classid in cgroup with heavy tasks cause long freeze of the file tables
in this tasks. By heavy tasks we understand tasks with many threads and
opened sockets (e.g. balancers). This freeze leads to an increase number
of client timeouts.

This patch implements following logic to fix this issue:
аfter iterating 1000 file descriptors file table lock will be released
thus providing a time gap for socket creation/deletion.

Now update is non atomic and socket may be skipped using calls:

dup2(oldfd, newfd);
close(oldfd);

But this case is not typical. Moreover before this patch skip is possible
too by hiding socket fd in unix socket buffer.

New sockets will be allocated with updated classid because cgroup state
is updated before start of the file descriptors iteration.

So in common cases this patch has no side effects.

Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Fixed one of HP ALC671 platform Headset Mic supported

commit f2adbae0cb20c8eaf06914b2187043ea944b0aff upstream.

HP want to keep BIOS verb table for release platform.
So, it need to add 0x19 pin for quirk.

Fixes: 5af29028fd6d ("ALSA: hda/realtek - Add Headset Mic supported for HP cPC")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/74636ccb700a4cbda24c58a99dc430ce@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Add Headset Mic supported for HP cPC

commit 5af29028fd6db9438b5584ab7179710a0a22569d upstream.

HP ALC671 need to support Headset Mic.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/06a9d2b176e14706976d6584cbe2d92a@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - More constifications

commit 6b0f95c49d890440c01a759c767dfe40e2acdbf2 upstream.

Apply const prefix to each coef table array.

Just for minor optimization and no functional changes.

Link: https://lore.kernel.org/r/20200105144823.29547-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio_balloon: Adjust label in virtballoon_probe

commit 6ae4edab2fbf86ec92fbf0a8f0c60b857d90d50f upstream.

Clang warns when CONFIG_BALLOON_COMPACTION is unset:

../drivers/virtio/virtio_balloon.c:963:1: warning: unused label
'out_del_vqs' [-Wunused-label]
out_del_vqs:
^~~~~~~~~~~~
1 warning generated.

Move the label within the preprocessor block since it is only used when
CONFIG_BALLOON_COMPACTION is set.

Fixes: 1ad6f58ea936 ("virtio_balloon: Fix memory leaks on errors in virtballoon_probe()")
Link: https://github.com/ClangBuiltLinux/linux/issues/886
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20200216004039.23464-1-natechancellor@gmail.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.4.25

drm/virtio: module_param_named() requires linux/moduleparam.h

commit b0138364da17617db052c4a738b58bf45e42f500 upstream.

Fixes: 3e93bc2a58aa ("drm/virtio: make resource id workaround runtime switchable.")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://patchwork.freedesktop.org/patch/msgid/20190828185516.22b03da8@canb.auug.org.au
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

csky: Implement copy_thread_tls

commit 0b9f386c4be6493d282aab0af6f9b70c62142777 upstream.

This is required for clone3 which passes the TLS value through a
struct rather than a register.

Cc: Amanieu d'Antras <amanieu@gmail.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block, bfq: remove ifdefs from around gets/puts of bfq groups

commit 4d8340d0d4d90e7ca367d18ec16c2fefa89a339c upstream.

ifdefs around gets and puts of bfq groups reduce readability, remove them.

Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block, bfq: get a ref to a group when adding it to a service tree

commit db37a34c563bf4692b36990ae89005c031385e52 upstream.

BFQ schedules generic entities, which may represent either bfq_queues
or groups of bfq_queues. When an entity is inserted into a service
tree, a reference must be taken, to make sure that the entity does not
disappear while still referred in the tree. Unfortunately, such a
reference is mistakenly taken only if the entity represents a
bfq_queue. This commit takes a reference also in case the entity
represents a group.

Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Chris Evich <cevich@redhat.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi: READ_ONCE rng seed size before munmap

commit be36f9e7517e17810ec369626a128d7948942259 upstream.

This function is consistent with using size instead of seed->size
(except for one place that this patch fixes), but it reads seed->size
without using READ_ONCE, which means the compiler might still do
something unwanted. So, this commit simply adds the READ_ONCE
wrapper.

Fixes: 636259880a7e ("efi: Add support for seeding the RNG from a UEFI ...")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-efi@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200217123354.21140-1-Jason@zx2c4.com
Link: https://lore.kernel.org/r/20200221084849.26878-5-ardb@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi/x86: Handle by-ref arguments covering multiple pages in mixed mode

commit 8319e9d5ad98ffccd19f35664382c73cea216193 upstream.

The mixed mode runtime wrappers are fragile when it comes to how the
memory referred to by its pointer arguments are laid out in memory, due
to the fact that it translates these addresses to physical addresses that
the runtime services can dereference when running in 1:1 mode. Since
vmalloc'ed pages (including the vmap'ed stack) are not contiguous in the
physical address space, this scheme only works if the referenced memory
objects do not cross page boundaries.

Currently, the mixed mode runtime service wrappers require that all by-ref
arguments that live in the vmalloc space have a size that is a power of 2,
and are aligned to that same value. While this is a sensible way to
construct an object that is guaranteed not to cross a page boundary, it is
overly strict when it comes to checking whether a given object violates
this requirement, as we can simply take the physical address of the first
and the last byte, and verify that they point into the same physical page.

When this check fails, we emit a WARN(), but then simply proceed with the
call, which could cause data corruption if the next physical page belongs
to a mapping that is entirely unrelated.

Given that with vmap'ed stacks, this condition is much more likely to
trigger, let's relax the condition a bit, but fail the runtime service
call if it does trigger.

Fixes: f6697df36bdf0bf7 ("x86/efi: Prevent mixed mode boot corruption with CONFIG_VMAP_STACK=y")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-efi@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200221084849.26878-4-ardb@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi/x86: Align GUIDs to their size in the mixed mode runtime wrapper

commit 63056e8b5ebf41d52170e9f5ba1fc83d1855278c upstream.

Hans reports that his mixed mode systems running v5.6-rc1 kernels hit
the WARN_ON() in virt_to_phys_or_null_size(), caused by the fact that
efi_guid_t objects on the vmap'ed stack happen to be misaligned with
respect to their sizes. As a quick (i.e., backportable) fix, copy GUID
pointer arguments to the local stack into a buffer that is naturally
aligned to its size, so that it is guaranteed to cover only one
physical page.

Note that on x86, we cannot rely on the stack pointer being aligned
the way the compiler expects, so we need to allocate an 8-byte aligned
buffer of sufficient size, and copy the GUID into that buffer at an
offset that is aligned to 16 bytes.

Fixes: f6697df36bdf0bf7 ("x86/efi: Prevent mixed mode boot corruption with CONFIG_VMAP_STACK=y")
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: linux-efi@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200221084849.26878-2-ardb@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: fix hardware PMU exception bug on PowerVM compatibility mode systems

commit fc37a1632d40c80c067eb1bc235139f5867a2667 upstream.

PowerVM systems running compatibility mode on a few Power8 revisions are
still vulnerable to the hardware defect that loses PMU exceptions arriving
prior to a context switch.

The software fix for this issue is enabled through the CPU_FTR_PMAO_BUG
cpu_feature bit, nevertheless this bit also needs to be set for PowerVM
compatibility mode systems.

Fixes: 68f2f0d431d9ea4 ("powerpc: Add a cpu feature CPU_FTR_PMAO_BUG")
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200227134715.9715-1-desnesn@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC/synopsys: Do not print an error with back-to-back snprintf() calls

commit dfc6014e3b60713f375d0601d7549eed224c4615 upstream.

handle_error() currently calls snprintf() a couple of times in
succession to output the message for a CE/UE, therefore overwriting each
part of the message which was formatted with the previous snprintf()
call. As a result, only the part of the message from the last snprintf()
call will be printed.

The simplest and most effective way to fix this problem is to combine
the whole string into one which to supply to a single snprintf() call.

 [ bp: Massage. ]

Fixes: b500b4a029d57 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: Manish Narani <manish.narani@xilinx.com>
Link: https://lkml.kernel.org/r/1582792452-32575-1-git-send-email-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: ti-sysc: Fix 1-wire reset quirk

commit aec551c7a00fb7eae049c0c4cc3208ca53e26355 upstream.

Because of the i2c quirk we have the reset quirks named in a confusing
way. Let's fix the 1-wire quirk accordinlyg. Then let's switch to using
better naming later on.

Fixes: 4e23be473e30 ("bus: ti-sysc: Add support for module specific reset quirks")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: meson: fix gxm-khadas-vim2 wifi

commit 146033562e7e5d1c9aae9653986806664995f1d5 upstream.

before

[6.418252] brcmfmac: F1 signature read @0x18000000=0x17224356
[6.435663] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
[6.551259] brcmfmac: brcmf_sdiod_ramrw: membytes transfer failed
[6.551275] brcmfmac: brcmf_sdio_verifymemory: error -84 on reading 2048 membytes at 0x00184000
[6.551352] brcmfmac: brcmf_sdio_download_firmware: dongle image file download failed

after

[6.657165] brcmfmac: F1 signature read @0x18000000=0x17224356
[6.660807] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
[6.918643] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
[6.918734] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[6.922724] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4356/2 wl0: Jun 16 2015 14:25:06 version 7.35.184.r1 (TOB) (r559293) FWID 01-b22ae69c

Fixes: adc52bf7ef16 ("arm64: dts: meson: fix mmc v2 chips max frequencies")
Suggested-by: Art Nikpal <email2tema@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/1582212790-11402-1-git-send-email-christianshewitt@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: coh901318: Fix a double lock bug in dma_tc_handle()

commit 36d5d22090d13fd3a7a8c9663a711cbe6970aac8 upstream.

The caller is already holding the lock so this will deadlock.

Fixes: 0b58828c923e ("DMAENGINE: COH 901 318 remove irq counting")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200217144050.3i4ymbytogod4ijn@kili.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf: free dmabuf->name in dma_buf_release()

commit d1f37226431f5d9657aa144a40f2383adbcf27e1 upstream.

dma-buf name can be set via DMA_BUF_SET_NAME ioctl, but once set
it never gets freed.

Free it in dma_buf_release().

Fixes: bb2bb9030425 ("dma-buf: add DMA_BUF_SET_NAME ioctls")
Reported-by: syzbot+b2098bc44728a4efb3e9@syzkaller.appspotmail.com
Cc: Greg Hackmann <ghackmann@google.com>
Cc: Chenbo Feng <fengc@google.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Chenbo Feng <fengc@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191227063204.5813-1-xiyou.wangcong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (adt7462) Fix an error return in ADT7462_REG_VOLT()

commit 44f2f882909fedfc3a56e4b90026910456019743 upstream.

This is only called from adt7462_update_device().  The caller expects it
to return zero on error.  I fixed a similar issue earlier in commit
a4bf06d58f21 ("hwmon: (adt7462) ADT7462_REG_VOLT_MAX() should return 0")
but I missed this one.

Fixes: c0b4e3ab0c76 ("adt7462: new hwmon driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200303101608.kqjwfcazu2ylhi2a@kili.mountain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx7-colibri: Fix frequency for sd/mmc

commit 2773fe1d31c42ffae2a9cb9a6055d99dd86e2fee upstream.

SD/MMC on Colibri iMX7S/D modules successfully support
200Mhz frequency in HS200 mode.

Removing the unnecessary max-frequency limit significantly
increases the performance:

== before fix ====
root@colibri-imx7-emmc:~# hdparm -t /dev/mmcblk0
/dev/mmcblk0:
 Timing buffered disk reads: 252 MB in  3.02 seconds =  83.54 MB/sec
==================

=== after fix ====
root@colibri-imx7-emmc:~# hdparm -t /dev/mmcblk0
/dev/mmcblk0:
 Timing buffered disk reads: 408 MB in  3.00 seconds = 135.94 MB/sec
==================

Fixes: f928a4a377e4 ("ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) support")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: dra7xx-clocks: Fixup IPU1 mux clock parent source

commit 78722d37b2b4cf9178295e2aa5510880e6135fd7 upstream.

The IPU1 functional clock is the output of a mux clock (represented
by ipu1_gfclk_mux previously) and the clock source for this has been
updated to be sourced from dpll_core_h22x2_ck in commit 39879c7d963e
("ARM: dts: dra7xx-clocks: Source IPU1 functional clock from CORE DPLL").
ipu1_gfclk_mux is an obsolete clock now with the clkctrl conversion,
and this clock source parenting is lost during the new clkctrl layout
conversion.

Remove this stale clock and fix up the clock source for this mux
clock using the latest equivalent clkctrl clock. This restores the
previous logic and ensures that the IPU1 continues to run at the
same frequency of IPU2 and independent of the ABE DPLL.

Fixes: b5f8ffbb6fad ("ARM: dts: dra7: convert to use new clkctrl layout")
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: am437x-idk-evm: Fix incorrect OPP node names

commit 31623468be0bf57617b8057dcd335693935a9491 upstream.

The commit 337c6c9a69af ("ARM: dts: am437x-idk-evm: Disable
OPP50 for MPU") adjusts couple of OPP nodes defined in the
common am4372.dtsi file, but used outdated node names. This
results in these getting treated as new OPP nodes with missing
properties.

Fix this properly by using the correct node names as updated in
commit b9cb2ba71848 ("ARM: dts: Use - instead of @ for DT OPP
entries for TI SoCs").

Reported-by: Roger Quadros <rogerq@ti.com>
Fixes: 337c6c9a69af ("ARM: dts: am437x-idk-evm: Disable OPP50 for MPU")
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: imx: build v7_cpu_resume() unconditionally

commit 512a928affd51c2dc631401e56ad5ee5d5dd68b6 upstream.

This function is not only needed by the platform suspend code, but is also
reused as the CPU resume function when the ARM cores can be powered down
completely in deep idle, which is the case on i.MX6SX and i.MX6UL(L).

Providing the static inline stub whenever CONFIG_SUSPEND is disabled means
that those platforms will hang on resume from cpuidle if suspend is disabled.

So there are two problems:

  - The static inline stub masks the linker error
  - The function is not available where needed

Fix both by just building the function unconditionally, when
CONFIG_SOC_IMX6 is enabled. The actual code is three instructions long,
so it's arguably ok to just leave it in for all i.MX6 kernel configurations.

Fixes: 05136f0897b5 ("ARM: imx: support arm power off in cpuidle for i.mx6sx")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1, qib: Ensure RCU is locked when accessing list

commit 817a68a6584aa08e323c64283fec5ded7be84759 upstream.

The packet handling function, specifically the iteration of the qp list
for mad packet processing misses locking RCU before running through the
list. Not only is this incorrect, but the list_for_each_entry_rcu() call
can not be called with a conditional check for lock dependency. Remedy
this by invoking the rcu lock and unlock around the critical section.

This brings MAD packet processing in line with what is done for non-MAD
packets.

Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20200225195445.140896.41873.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RMDA/cm: Fix missing ib_cm_destroy_id() in ib_cm_insert_listen()

commit c14dfddbd869bf0c2bafb7ef260c41d9cebbcfec upstream.

The algorithm pre-allocates a cm_id since allocation cannot be done while
holding the cm.lock spinlock, however it doesn't free it on one error
path, leading to a memory leak.

Fixes: 067b171b8679 ("IB/cm: Share listening CM IDs")
Link: https://lore.kernel.org/r/20200221152023.GA8680@ziepe.ca
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: stm32-vrefbuf: fix a possible overshoot when re-enabling

commit 02fbabd5f4ed182d2c616e49309f5a3efd9ec671 upstream.

There maybe an overshoot, when disabling, then re-enabling vrefbuf
too quickly. VREFBUF is used by ADC/DAC on some boards. When re-enabling
too quickly, an overshoot on the reference voltage make the conversions
inaccurate for a short period of time.
- Don't put the VREFBUF in HiZ when disabling, to force an active
discharge.
- Enforce a 1ms OFF/ON delay

Fixes: 0cdbf481e927 ("regulator: Add support for stm32-vrefbuf")

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Message-Id: <1583312132-20932-1-git-send-email-fabrice.gasnier@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/core: Fix protection fault in ib_mr_pool_destroy

commit e38b55ea0443da35a50a3eb2079ad3612cf763b9 upstream.

Fix NULL pointer dereference in the error flow of ib_create_qp_user
when accessing to uninitialized list pointers - rdma_mrs and sig_mrs.
The following crash from syzkaller revealed it.

  kasan: GPF could be caused by NULL-ptr deref or user memory access
  general protection fault: 0000 [#1] SMP KASAN PTI
  CPU: 1 PID: 23167 Comm: syz-executor.1 Not tainted 5.5.0-rc5 #2
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
  RIP: 0010:ib_mr_pool_destroy+0x81/0x1f0
  Code: 00 00 fc ff df 49 c1 ec 03 4d 01 fc e8 a8 ea 72 fe 41 80 3c 24 00
  0f 85 62 01 00 00 48 8b 13 48 89 d6 4c 8d 6a c8 48 c1 ee 03 <42> 80 3c
  3e 00 0f 85 34 01 00 00 48 8d 7a 08 4c 8b 02 48 89 fe 48
  RSP: 0018:ffffc9000951f8b0 EFLAGS: 00010046
  RAX: 0000000000040000 RBX: ffff88810f268038 RCX: ffffffff82c41628
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffc9000951f850
  RBP: ffff88810f268020 R08: 0000000000000004 R09: fffff520012a3f0a
  R10: 0000000000000001 R11: fffff520012a3f0a R12: ffffed1021e4d007
  R13: ffffffffffffffc8 R14: 0000000000000246 R15: dffffc0000000000
  FS:  00007f54bc788700(0000) GS:ffff88811b100000(0000)
  knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 0000000116920002 CR4: 0000000000360ee0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   rdma_rw_cleanup_mrs+0x15/0x30
   ib_destroy_qp_user+0x674/0x7d0
   ib_create_qp_user+0xb01/0x11c0
   create_qp+0x1517/0x2130
   ib_uverbs_create_qp+0x13e/0x190
   ib_uverbs_write+0xaa5/0xdf0
   __vfs_write+0x7c/0x100
   vfs_write+0x168/0x4a0
   ksys_write+0xc8/0x200
   do_syscall_64+0x9c/0x390
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x465b49
  Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89
  f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
  f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
  RSP: 002b:00007f54bc787c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
  RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000465b49
  RDX: 0000000000000040 RSI: 0000000020000540 RDI: 0000000000000003
  RBP: 00007f54bc787c70 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000246 R12: 00007f54bc7886bc
  R13: 00000000004ca2ec R14: 000000000070ded0 R15: 0000000000000005

Fixes: a060b5629ab0 ("IB/core: generic RDMA READ/WRITE API")
Link: https://lore.kernel.org/r/20200227112708.93023-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/iwcm: Fix iwcm work deallocation

commit 810dbc69087b08fd53e1cdd6c709f385bc2921ad upstream.

The dealloc_work_entries() function must update the work_free_list pointer
while freeing its entries, since potentially called again on same list. A
second iteration of the work list caused system crash. This happens, if
work allocation fails during cma_iw_listen() and free_cm_id() tries to
free the list again during cleanup.

Fixes: 922a8e9fb2e0 ("RDMA: iWARP Connection Manager.")
Link: https://lore.kernel.org/r/20200302181614.17042-1-bmt@zurich.ibm.com
Reported-by: syzbot+cb0c054eabfba4342146@syzkaller.appspotmail.com
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/siw: Fix failure handling during device creation

commit 12e5eef0f4d8087ea7b559f6630be08ffea2d851 upstream.

A failing call to ib_device_set_netdev() during device creation caused
system crash due to xa_destroy of uninitialized xarray hit by device
deallocation. Fixed by moving xarray initialization before potential
device deallocation.

Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface")
Link: https://lore.kernel.org/r/20200302155814.9896-1-bmt@zurich.ibm.com
Reported-by: syzbot+2e80962bedd9559fe0b3@syzkaller.appspotmail.com
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/nldev: Fix crash when set a QP to a new counter but QPN is missing

commit 78f34a16c28654cb47791257006f90d0948f2f0c upstream.

This fixes the kernel crash when a RDMA_NLDEV_CMD_STAT_SET command is
received, but the QP number parameter is not available.

  iwpm_register_pid: Unable to send a nlmsg (client = 2)
  infiniband syz1: RDMA CMA: cma_listen_on_dev, error -98
  general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
  KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
  CPU: 0 PID: 9754 Comm: syz-executor069 Not tainted 5.6.0-rc2-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  RIP: 0010:nla_get_u32 include/net/netlink.h:1474 [inline]
  RIP: 0010:nldev_stat_set_doit+0x63c/0xb70 drivers/infiniband/core/nldev.c:1760
  Code: fc 01 0f 84 58 03 00 00 e8 41 83 bf fb 4c 8b a3 58 fd ff ff 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 6d
  RSP: 0018:ffffc900068bf350 EFLAGS: 00010247
  RAX: dffffc0000000000 RBX: ffffc900068bf728 RCX: ffffffff85b60470
  RDX: 0000000000000000 RSI: ffffffff85b6047f RDI: 0000000000000004
  RBP: ffffc900068bf750 R08: ffff88808c3ee140 R09: ffff8880a25e6010
  R10: ffffed10144bcddc R11: ffff8880a25e6ee3 R12: 0000000000000000
  R13: ffff88809acb0000 R14: ffff888092a42c80 R15: 000000009ef2e29a
  FS:  0000000001ff0880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f4733e34000 CR3: 00000000a9b27000 CR4: 00000000001406f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
    rdma_nl_rcv_msg drivers/infiniband/core/netlink.c:195 [inline]
    rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline]
    rdma_nl_rcv+0x5d9/0x980 drivers/infiniband/core/netlink.c:259
    netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
    netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1329
    netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1918
    sock_sendmsg_nosec net/socket.c:652 [inline]
    sock_sendmsg+0xd7/0x130 net/socket.c:672
    ____sys_sendmsg+0x753/0x880 net/socket.c:2343
    ___sys_sendmsg+0x100/0x170 net/socket.c:2397
    __sys_sendmsg+0x105/0x1d0 net/socket.c:2430
    __do_sys_sendmsg net/socket.c:2439 [inline]
    __se_sys_sendmsg net/socket.c:2437 [inline]
    __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437
    do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
    entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x4403d9
  Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
  RSP: 002b:00007ffc0efbc5c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
  RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004403d9
  RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000004
  RBP: 00000000006ca018 R08: 0000000000000008 R09: 00000000004002c8
  R10: 000000000000004a R11: 0000000000000246 R12: 0000000000401c60
  R13: 0000000000401cf0 R14: 0000000000000000 R15: 0000000000000000

Fixes: b389327df905 ("RDMA/nldev: Allow counter manual mode configration through RDMA netlink")
Link: https://lore.kernel.org/r/20200227125111.99142-1-leon@kernel.org
Reported-by: syzbot+bd4af81bc51ee0283445@syzkaller.appspotmail.com
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/rw: Fix error flow during RDMA context initialization

commit 6affca140cbea01f497c4f4e16f1e2be7f74bd04 upstream.

In case the SGL was mapped for P2P DMA operation, we must unmap it using
pci_p2pdma_unmap_sg during the error unwind of rdma_rw_ctx_init()

Fixes: 7f73eac3a713 ("PCI/P2PDMA: Introduce pci_p2pdma_unmap_sg()")
Link: https://lore.kernel.org/r/20200220100819.41860-1-maxg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "RDMA/cma: Simplify rdma_resolve_addr() error flow"

commit e4103312d7b7afb8a3a7a842a33ef2b1856b2c0f upstream.

This reverts commit 219d2e9dfda9431b808c28d5efc74b404b95b638.

The call chain below requires the cm_id_priv's destination address to be
setup before performing rdma_bind_addr(). Otherwise source port allocation
fails as cma_port_is_unique() no longer sees the correct tuple to allow
duplicate users of the source port.

rdma_resolve_addr()
  cma_bind_addr()
    rdma_bind_addr()
      cma_get_port()
        cma_alloc_any_port()
          cma_port_is_unique() <- compared with zero daddr

This can result in false failures to connect, particularly if the source
port range is restricted.

Fixes: 219d2e9dfda9 ("RDMA/cma: Simplify rdma_resolve_addr() error flow")
Link: https://lore.kernel.org/r/20200212072635.682689-4-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: imx-scu: Align imx sc msg structs to 4

commit f10e58a5d20e1cf3a39a842da92c9dd0c3c23849 upstream.

The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.

This produces many oopses with CONFIG_KASAN=y.

Fix by marking with __aligned(4).

Fixes: 73feb4d0f8f1 ("soc: imx-scu: Add SoC UID(unique identifier) support")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: imx: Align imx_sc_msg_req_cpu_start to 4

commit f5bfeff44612d304deb100065a9f712309dc2783 upstream.

The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.

This produces many oopses with CONFIG_KASAN=y.

Fix by marking with __aligned(4).

Fixes: d90bf296ae18 ("firmware: imx: Add support to start/stop a CPU")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: imx: scu-pd: Align imx sc msg structs to 4

commit 7c1a1c814ccc858633c761951c2546041202b24e upstream.

The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.

This produces many oopses with CONFIG_KASAN=y.

Fix by marking with __aligned(4).

Fixes: c800cd7824bd ("firmware: imx: add SCU power domain driver")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: imx: misc: Align imx sc msg structs to 4

commit 1e6a4eba693ac72e6f91b4252458c933110e5f4c upstream.

The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.

This produces many oopses with CONFIG_KASAN=y:

    BUG: KASAN: stack-out-of-bounds in imx_mu_send_data+0x108/0x1f0

It shouldn't cause an issues in normal use because these structs are
always allocated on the stack.

Fixes: 15e1f2bc8b3b ("firmware: imx: add misc svc support")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: imx8qxp-mek: Remove unexisting Ethernet PHY

commit 26c4b4758fce8f0ae744335e1762213be29db441 upstream.

There is only on Ethernet port and one Ethernet PHY on imx8qxp-mek.

Remove the unexisting ethphy1 port.

This fixes a run-time warning:

mdio_bus 5b040000.ethernet-1: MDIO device at address 1 is missing.

Fixes: fdea904e85e1 ("arm64: dts: imx: add imx8qxp mek support")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx6: phycore-som: fix emmc supply

commit eb0bbba7636b9fc81939d6087a5fe575e150c95a upstream.

Currently the vmmc is supplied by the 1.8V pmic rail but this is wrong.
The default module behaviour is to power VCCQ and VCC by the 3.3V power
rail. Optional the user can connect the VCCQ to the pmic 1.8V emmc
power rail using a solder jumper.

Fixes: ddec5d1c0047 ("ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: mapphone-mdm6600: Fix write timeouts with shorter GPIO toggle interval

commit 46b7edf1c7b7c91004c4db2c355cbd033f2385f9 upstream.

I've noticed that when writing data to the modem the writes can time out
at some point eventually. Looks like kicking the modem idle GPIO every
600 ms instead of once a second fixes the issue. Note that this rate is
different from our runtime PM autosuspend rate MDM6600_MODEM_IDLE_DELAY_MS
that we still want to keep at 1 second, so let's add a separate define for
PHY_MDM6600_IDLE_KICK_MS.

Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend")
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Scott <hashcode0f@gmail.com>
Cc: NeKit <nekit1000@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: mapphone-mdm6600: Fix timeouts by adding wake-up handling

commit be4e3c737eebd75815633f4b8fd766defaf0f1fc upstream.

We have an interrupt handler for the wake-up GPIO pin, but we're missing
the code to wake-up the system. This can cause timeouts receiving data
for the UART that shares the wake-up GPIO pin with the USB PHY.

All we need to do is just wake the system and kick the autosuspend
timeout to fix the issue.

Fixes: 5d1ebbda0318 ("phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4")
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Scott <hashcode0f@gmail.com>
Cc: NeKit <nekit1000@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/selftests: Fix return in assert_mmap_offset()

commit f4aaa44e8b20f7e0d4ea68d3bca4968b6ae5aaff upstream.

The assert_mmap_offset() returns type bool so if we return an error
pointer that is "return true;" or success.  If we have an error, then
we should return false.

Fixes: 3d81d589d6e3 ("drm/i915: Test exhaustion of the mmap space")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228141413.qfjf4abr323drlo4@kili.mountain
(cherry picked from commit efbf928824820f2738f41271934f6ec2c6ebd587)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Program MBUS with rmw during initialization

commit c725161924f9a5872a3e53b73345a6026a5c170e upstream.

It wasn't terribly clear from the bspec's wording, but after discussion
with the hardware folks, it turns out that we need to preserve the
pre-existing contents of the MBUS ABOX control register when
initializing a few specific bits.

Bspec: 49213
Bspec: 50096
Fixes: 4cb4585e5a7f ("drm/i915/icl: initialize MBus during display init")
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204011032.582737-1-matthew.d.roper@intel.com
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
(cherry picked from commit 837b63e6087838d0f1e612d448405419199d8033)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228004320.127142-1-matthew.d.roper@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>