f2fs: fix to wait all node page writeback

[ Upstream commit dc5a941223edd803f476a153abd950cc3a83c3e1 ]

There is a race condition that we may miss to wait for all node pages
writeback, fix it.

- fsync() - shrink
 - f2fs_do_sync_file
 - __write_node_page
  - set_page_writeback(page#0)
  : remove DIRTY/TOWRITE flag
  - f2fs_fsync_node_pages
  : won't find page #0 as TOWRITE flag was removeD
  - f2fs_wait_on_node_pages_writeback
  : wont' wait page #0 writeback as it was not in fsync_node_list list.
   - f2fs_add_fsync_node_entry

Fixes: 50fa53eccf9f ("f2fs: fix to avoid broken of dnode block list")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/amd: Fix the configuration of GCR3 table root pointer

[ Upstream commit c20f36534666e37858a14e591114d93cc1be0d34 ]

The SPA of the GCR3 table root pointer[51:31] masks 20 bits. However,
this requires 21 bits (Please see the AMD IOMMU specification).
This leads to the potential failure when the bit 51 of SPA of
the GCR3 table root pointer is 1'.

Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Fixes: 52815b75682e2 ("iommu/amd: Add support for IOMMUv2 domain mode")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libnvdimm: Out of bounds read in __nd_ioctl()

[ Upstream commit f84afbdd3a9e5e10633695677b95422572f920dc ]

The "cmd" comes from the user and it can be up to 255.  It it's more
than the number of bits in long, it results out of bounds read when we
check test_bit(cmd, &cmd_mask).  The highest valid value for "cmd" is
ND_CMD_CALL (10) so I added a compare against that.

Fixes: 62232e45f4a2 ("libnvdimm: control (ioctl) messages for nvdimm_bus and nvdimm devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200225162055.amtosfy7m35aivxg@kili.mountain
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: axp288_fuel_gauge: Broaden vendor check for Intel Compute Sticks.

[ Upstream commit e42fe5b29ac07210297e75f36deefe54edbdbf80 ]

The Intel Compute Stick `STK1A32SC` can have a system vendor of
"Intel(R) Client Systems".
Broaden the Intel Compute Stick DMI checks so that they match "Intel
Corporation" as well as "Intel(R) Client Systems".

This fixes an issue where the STK1A32SC compute sticks were still
exposing a battery with the existing blacklist entry.

Signed-off-by: Jeffery Miller <jmiller@neverware.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

csky: Fixup init_fpu compile warning with __init

[ Upstream commit 12879bda3c2a974b7e4fe199a9c21f0c5f6bca04 ]

WARNING: vmlinux.o(.text+0x2366): Section mismatch in reference from the
function csky_start_secondary() to the function .init.text:init_fpu()

The function csky_start_secondary() references
the function __init init_fpu().
This is often because csky_start_secondary lacks a __init
annotation or the annotation of init_fpu is wrong.

Reported-by: Lu Chongzhi <chongzhi.lcz@alibaba-inc.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sunrpc: Fix gss_unwrap_resp_integ() again

[ Upstream commit 4047aa909c4a40fceebc36fff708d465a4d3c6e2 ]

xdr_buf_read_mic() tries to find unused contiguous space in a
received xdr_buf in order to linearize the checksum for the call
to gss_verify_mic. However, the corner cases in this code are
numerous and we seem to keep missing them. I've just hit yet
another buffer overrun related to it.

This overrun is at the end of xdr_buf_read_mic():

1284         if (buf->tail[0].iov_len != 0)
1285                 mic->data = buf->tail[0].iov_base + buf->tail[0].iov_len;
1286         else
1287                 mic->data = buf->head[0].iov_base + buf->head[0].iov_len;
1288         __read_bytes_from_xdr_buf(&subbuf, mic->data, mic->len);
1289         return 0;

This logic assumes the transport has set the length of the tail
based on the size of the received message. base + len is then
supposed to be off the end of the message but still within the
actual buffer.

In fact, the length of the tail is set by the upper layer when the
Call is encoded so that the end of the tail is actually the end of
the allocated buffer itself. This causes the logic above to set
mic->data to point past the end of the receive buffer.

The "mic->data = head" arm of this if statement is no less fragile.

As near as I can tell, this has been a problem forever. I'm not sure
that minimizing au_rslack recently changed this pathology much.

So instead, let's use a more straightforward approach: kmalloc a
separate buffer to linearize the checksum. This is similar to
how gss_validate() currently works.

Coming back to this code, I had some trouble understanding what
was going on. So I've cleaned up the variable naming and added
a few comments that point back to the XDR definition in RFC 2203
to help guide future spelunkers, including myself.

As an added clean up, the functionality that was in
xdr_buf_read_mic() is folded directly into gss_unwrap_resp_integ(),
as that is its only caller.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext2: fix debug reference to ext2_xattr_cache

[ Upstream commit 32302085a8d90859c40cf1a5e8313f575d06ec75 ]

Fix a debug-only build error in ext2/xattr.c:

When building without extra debugging, (and with another patch that uses
no_printk() instead of <empty> for the ext2-xattr debug-print macros,
this build error happens:

../fs/ext2/xattr.c: In function ‘ext2_xattr_cache_insert’:
../fs/ext2/xattr.c:869:18: error: ‘ext2_xattr_cache’ undeclared (first use in
this function); did you mean ‘ext2_xattr_list’?
     atomic_read(&ext2_xattr_cache->c_entry_count));

Fix the problem by removing cached entry count from the debug message
since otherwise we'd have to export the mbcache structure just for that.

Fixes: be0726d33cb8 ("ext2: convert to mbcache2")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Fix page request descriptor size

[ Upstream commit 52355fb1919ef7ed9a38e0f3de6e928de1f57217 ]

Intel VT-d might support PRS (Page Reqest Support) when it's
running in the scalable mode. Each page request descriptor
occupies 32 bytes and is 32-bytes aligned. The page request
descriptor offset mask should be 32-bytes aligned.

Fixes: 5b438f4ba315d ("iommu/vt-d: Support page request in scalable mode")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Silence RCU-list debugging warning in dmar_find_atsr()

[ Upstream commit c6f4ebdeba4cff590594df931ff1ee610c426431 ]

dmar_find_atsr() calls list_for_each_entry_rcu() outside of an RCU read
side critical section but with dmar_global_lock held. Silence this
false positive.

 drivers/iommu/intel-iommu.c:4504 RCU-list traversed in non-reader section!!
 1 lock held by swapper/0/1:
 #0: ffffffff9755bee8 (dmar_global_lock){+.+.}, at: intel_iommu_init+0x1a6/0xe19

 Call Trace:
  dump_stack+0xa4/0xfe
  lockdep_rcu_suspicious+0xeb/0xf5
  dmar_find_atsr+0x1ab/0x1c0
  dmar_parse_one_atsr+0x64/0x220
  dmar_walk_remapping_entries+0x130/0x380
  dmar_table_init+0x166/0x243
  intel_iommu_init+0x1ab/0xe19
  pci_iommu_init+0x1a/0x44
  do_one_initcall+0xae/0x4d0
  kernel_init_freeable+0x412/0x4c5
  kernel_init+0x19/0x193

Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext2: fix empty body warnings when -Wextra is used

[ Upstream commit 44a52022e7f15cbaab957df1c14f7a4f527ef7cf ]

When EXT2_ATTR_DEBUG is not defined, modify the 2 debug macros
to use the no_printk() macro instead of <nothing>.
This fixes gcc warnings when -Wextra is used:

../fs/ext2/xattr.c:252:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../fs/ext2/xattr.c:258:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../fs/ext2/xattr.c:330:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../fs/ext2/xattr.c:872:45: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]

I have verified that the only object code change (with gcc 7.5.0) is
the reversal of some instructions from 'cmp a,b' to 'cmp b,a'.

Link: https://lore.kernel.org/r/e18a7395-61fb-2093-18e8-ed4f8cf56248@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jan Kara <jack@suse.com>
Cc: linux-ext4@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: fix krb5p mount to provide large enough buffer in rq_rcvsize

[ Upstream commit df513a7711712758b9cb1a48d86712e7e1ee03f4 ]

Ever since commit 2c94b8eca1a2 ("SUNRPC: Use au_rslack when computing
reply buffer size"). It changed how "req->rq_rcvsize" is calculated. It
used to use au_cslack value which was nice and large and changed it to
au_rslack value which turns out to be too small.

Since 5.1, v3 mount with sec=krb5p fails against an Ontap server
because client's receive buffer it too small.

For gss krb5p, we need to account for the mic token in the verifier,
and the wrap token in the wrap token.

RFC 4121 defines:
mic token
Octet no   Name        Description
         --------------------------------------------------------------
         0..1     TOK_ID     Identification field.  Tokens emitted by
                             GSS_GetMIC() contain the hex value 04 04
                             expressed in big-endian order in this
                             field.
         2        Flags      Attributes field, as described in section
                             4.2.2.
         3..7     Filler     Contains five octets of hex value FF.
         8..15    SND_SEQ    Sequence number field in clear text,
                             expressed in big-endian order.
         16..last SGN_CKSUM  Checksum of the "to-be-signed" data and
                             octet 0..15, as described in section 4.2.4.

that's 16bytes (GSS_KRB5_TOK_HDR_LEN) + chksum

wrap token
Octet no   Name        Description
         --------------------------------------------------------------
          0..1     TOK_ID    Identification field.  Tokens emitted by
                             GSS_Wrap() contain the hex value 05 04
                             expressed in big-endian order in this
                             field.
          2        Flags     Attributes field, as described in section
                             4.2.2.
          3        Filler    Contains the hex value FF.
          4..5     EC        Contains the "extra count" field, in big-
                             endian order as described in section 4.2.3.
          6..7     RRC       Contains the "right rotation count" in big-
                             endian order, as described in section
                             4.2.5.
          8..15    SND_SEQ   Sequence number field in clear text,
                             expressed in big-endian order.
          16..last Data      Encrypted data for Wrap tokens with
                             confidentiality, or plaintext data followed
                             by the checksum for Wrap tokens without
                             confidentiality, as described in section
                             4.2.4.

Also 16bytes of header (GSS_KRB5_TOK_HDR_LEN), encrypted data, and cksum
(other things like padding)

RFC 3961 defines known cksum sizes:
Checksum type              sumtype        checksum         section or
                                value            size         reference
   ---------------------------------------------------------------------
   CRC32                            1               4           6.1.3
   rsa-md4                          2              16           6.1.2
   rsa-md4-des                      3              24           6.2.5
   des-mac                          4              16           6.2.7
   des-mac-k                        5               8           6.2.8
   rsa-md4-des-k                    6              16           6.2.6
   rsa-md5                          7              16           6.1.1
   rsa-md5-des                      8              24           6.2.4
   rsa-md5-des3                     9              24             ??
   sha1 (unkeyed)                  10              20             ??
   hmac-sha1-des3-kd               12              20            6.3
   hmac-sha1-des3                  13              20             ??
   sha1 (unkeyed)                  14              20             ??
   hmac-sha1-96-aes128             15              20         [KRB5-AES]
   hmac-sha1-96-aes256             16              20         [KRB5-AES]
   [reserved]                  0x8003               ?         [GSS-KRB5]

Linux kernel now mainly supports type 15,16 so max cksum size is 20bytes.
(GSS_KRB5_MAX_CKSUM_LEN)

Re-use already existing define of GSS_KRB5_MAX_SLACK_NEEDED that's used
for encoding the gss_wrap tokens (same tokens are used in reply).

Fixes: 2c94b8eca1a2 ("SUNRPC: Use au_rslack when computing reply buffer size")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Fix mm reference leak

[ Upstream commit 902baf61adf6b187f0a6b789e70d788ea71ff5bc ]

Move canonical address check before mmget_not_zero() to avoid mm
reference leak.

Fixes: 9d8c3af31607 ("iommu/vt-d: IOMMU Page Request needs to check if address is canonical.")
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/virtio: Fix freeing of incomplete domains

[ Upstream commit 7062af3ed2ba451029e3733d9f677c68f5ea9e77 ]

Calling viommu_domain_free() on a domain that hasn't been finalised (not
attached to any device, for example) can currently cause an Oops,
because we attempt to call ida_free() on ID 0, which may either be
unallocated or used by another domain.

Only initialise the vdomain->viommu pointer, which denotes a finalised
domain, at the end of a successful viommu_domain_finalise().

Fixes: edcd69ab9a32 ("iommu: Add virtio-iommu driver")
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20200326093558.2641019-3-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: Fix HDMI mode validation

[ Upstream commit b1e7396a1d0e6af6806337fdaaa44098d6b3343c ]

Current mode validation impedes setting up some video modes which should
be supported otherwise. Namely 1920x1200@60Hz.

Fix this by lowering the minimum HDMI state machine clock to pixel clock
ratio allowed.

Fixes: 32e823c63e90 ("drm/vc4: Reject HDMI modes with too high of clocks.")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326122001.22215-1-nsaenzjulienne@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: falloc.h needs to be directly included for older libc

[ Upstream commit 35f3401317a3b26aa01fde8facfd320f2628fdcc ]

When building UML with glibc 2.17 installed, compilation
of arch/um/os-Linux/file.c fails due to failure to find
FALLOC_FL_PUNCH_HOLE and FALLOC_FL_KEEP_SIZE definitions.

It appears that /usr/include/bits/fcntl-linux.h (indirectly
included by /usr/include/fcntl.h) does not include falloc.h
with an older glibc, whereas a more up-to-date version
does.

Adding the direct include to file.c resolves the issue
and does not cause problems for more recent glibc.

Fixes: 50109b5a03b4 ("um: Add support for DISCARD in the UBD Driver")
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPICA: Fixes for acpiExec namespace init file

[ Upstream commit 9a1ae80412dcaa67a29eecf19de44f32b5f1c357 ]

This is the result of squashing the following ACPICA commit ID's:
6803997e5b4f3635cea6610b51ff69e29d251de3
f31cdf8bfda22fe265c1a176d0e33d311c82a7f7

This change fixes several problems with the support for the
acpi_exec namespace init file (-fi option). Specifically, it
fixes AE_ALREADY_EXISTS errors, as well as various seg faults.

Link: https://github.com/acpica/acpica/commit/f31cdf8b
Link: https://github.com/acpica/acpica/commit/6803997e
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix NULL pointer dereference in f2fs_write_begin()

[ Upstream commit 62f63eea291b50a5677ae7503ac128803174698a ]

BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:f2fs_write_begin+0x823/0xb90 [f2fs]
Call Trace:
 f2fs_quota_write+0x139/0x1d0 [f2fs]
 write_blk+0x36/0x80 [quota_tree]
 get_free_dqblk+0x42/0xa0 [quota_tree]
 do_insert_tree+0x235/0x4a0 [quota_tree]
 do_insert_tree+0x26e/0x4a0 [quota_tree]
 do_insert_tree+0x26e/0x4a0 [quota_tree]
 do_insert_tree+0x26e/0x4a0 [quota_tree]
 qtree_write_dquot+0x70/0x190 [quota_tree]
 v2_write_dquot+0x43/0x90 [quota_v2]
 dquot_acquire+0x77/0x100
 f2fs_dquot_acquire+0x2f/0x60 [f2fs]
 dqget+0x310/0x450
 dquot_transfer+0x7e/0x120
 f2fs_setattr+0x11a/0x4a0 [f2fs]
 notify_change+0x349/0x480
 chown_common+0x168/0x1c0
 do_fchownat+0xbc/0xf0
 __x64_sys_fchownat+0x20/0x30
 do_syscall_64+0x5f/0x220
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Passing fsdata parameter to .write_{begin,end} in f2fs_quota_write(),
so that if quota file is compressed one, we can avoid above NULL
pointer dereference when updating quota content.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

csky: Fixup get wrong psr value from phyical reg

[ Upstream commit 9c0e343d7654a329d1f9b53d253cbf7fb6eff85d ]

We should get psr value from regs->psr in stack, not directly get
it from phyiscal register then save the vector number in
tsk->trap_no.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Fix memory leaks in nfs_pageio_stop_mirroring()

[ Upstream commit 862f35c94730c9270833f3ad05bd758a29f204ed ]

If we just set the mirror count to 1 without first clearing out
the mirrors, we can leak queued up requests.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: kfree the wrong pointer

[ Upstream commit 3148a6a0ef3cf93570f30a477292768f7eb5d3c3 ]

Originally, it kfrees the wrong pointer for mem_obj.
It would cause memory leak under stress test.

Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

csky: Fixup cpu speculative execution to IO area

[ Upstream commit aefd9461d34a1b0a2acad0750c43216c1c27b9d4 ]

For the memory size ( > 512MB, < 1GB), the MSA setting is:

 - SSEG0: PHY_START        , PHY_START + 512MB
 - SSEG1: PHY_START + 512MB, PHY_START + 1GB

But the real memory is no more than 1GB, there is a gap between the
end size of memory and border of 1GB. CPU could speculatively
execute to that gap and if the gap of the bus couldn't respond to
the CPU request, then the crash will happen.

Now make the setting with:

 - SSEG0: PHY_START        , PHY_START + 512MB (no change)
 - SSEG1: Disabled (We use highmem to use the memory of 512MB~1GB)

We also deprecated zhole_szie[] settings, it's only used by arm
style CPUs. All memory gap should use Reserved setting of dts in
csky system.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86: ACPI: fix CPU hotplug deadlock

[ Upstream commit 696ac2e3bf267f5a2b2ed7d34e64131f2287d0ad ]

Similar to commit 0266d81e9bf5 ("acpi/processor: Prevent cpu hotplug
deadlock") except this is for acpi_processor_ffh_cstate_probe():

"The problem is that the work is scheduled on the current CPU from the
hotplug thread associated with that CPU.

It's not required to invoke these functions via the workqueue because
the hotplug thread runs on the target CPU already.

Check whether current is a per cpu thread pinned on the target CPU and
invoke the function directly to avoid the workqueue."

 WARNING: possible circular locking dependency detected
 ------------------------------------------------------
 cpuhp/1/15 is trying to acquire lock:
 ffffc90003447a28 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: __flush_work+0x4c6/0x630

 but task is already holding lock:
 ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (cpu_hotplug_lock){++++}-{0:0}:
 cpus_read_lock+0x3e/0xc0
 irq_calc_affinity_vectors+0x5f/0x91
 __pci_enable_msix_range+0x10f/0x9a0
 pci_alloc_irq_vectors_affinity+0x13e/0x1f0
 pci_alloc_irq_vectors_affinity at drivers/pci/msi.c:1208
 pqi_ctrl_init+0x72f/0x1618 [smartpqi]
 pqi_pci_probe.cold.63+0x882/0x892 [smartpqi]
 local_pci_probe+0x7a/0xc0
 work_for_cpu_fn+0x2e/0x50
 process_one_work+0x57e/0xb90
 worker_thread+0x363/0x5b0
 kthread+0x1f4/0x220
 ret_from_fork+0x27/0x50

 -> #0 ((work_completion)(&wfc.work)){+.+.}-{0:0}:
 __lock_acquire+0x2244/0x32a0
 lock_acquire+0x1a2/0x680
 __flush_work+0x4e6/0x630
 work_on_cpu+0x114/0x160
 acpi_processor_ffh_cstate_probe+0x129/0x250
 acpi_processor_evaluate_cst+0x4c8/0x580
 acpi_processor_get_power_info+0x86/0x740
 acpi_processor_hotplug+0xc3/0x140
 acpi_soft_cpu_online+0x102/0x1d0
 cpuhp_invoke_callback+0x197/0x1120
 cpuhp_thread_fun+0x252/0x2f0
 smpboot_thread_fn+0x255/0x440
 kthread+0x1f4/0x220
 ret_from_fork+0x27/0x50

 other info that might help us debug this:

 Chain exists of:
 (work_completion)(&wfc.work) --> cpuhp_state-up --> cpuidle_lock

 Possible unsafe locking scenario:

 CPU0                    CPU1
 ----                    ----
 lock(cpuidle_lock);
                         lock(cpuhp_state-up);
                         lock(cpuidle_lock);
 lock((work_completion)(&wfc.work));

 *** DEADLOCK ***

 3 locks held by cpuhp/1/15:
 #0: ffffffffaf51ab10 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0
 #1: ffffffffaf51ad40 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0
 #2: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20

 Call Trace:
 dump_stack+0xa0/0xea
 print_circular_bug.cold.52+0x147/0x14c
 check_noncircular+0x295/0x2d0
 __lock_acquire+0x2244/0x32a0
 lock_acquire+0x1a2/0x680
 __flush_work+0x4e6/0x630
 work_on_cpu+0x114/0x160
 acpi_processor_ffh_cstate_probe+0x129/0x250
 acpi_processor_evaluate_cst+0x4c8/0x580
 acpi_processor_get_power_info+0x86/0x740
 acpi_processor_hotplug+0xc3/0x140
 acpi_soft_cpu_online+0x102/0x1d0
 cpuhp_invoke_callback+0x197/0x1120
 cpuhp_thread_fun+0x252/0x2f0
 smpboot_thread_fn+0x255/0x440
 kthread+0x1f4/0x220
 ret_from_fork+0x27/0x50

Signed-off-by: Qian Cai <cai@lca.pw>
Tested-by: Borislav Petkov <bp@suse.de>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: core: Fix warning message when init_data

[ Upstream commit 64ed6588c2ea618d3f9ca9d8b365ae4c19f76225 ]

The warning message when a led is renamed due to name collition can fail
to show proper original name if init_data is used. Eg:

[    9.073996] leds-gpio a0040000.leds_0: Led (null) renamed to red_led_1 due to name collision

Fixes: bb4e9af0348d ("leds: core: Add support for composing LED class device names")
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau: workaround runpm fail by disabling PCI power management on certain intel bridges

[ Upstream commit 434fdb51513bf3057ac144d152e6f2f2b509e857 ]

Fixes the infamous 'runtime PM' bug many users are facing on Laptops with
Nvidia Pascal GPUs by skipping said PCI power state changes on the GPU.

Depending on the used kernel there might be messages like those in demsg:

"nouveau 0000:01:00.0: Refused to change power state, currently in D3"
"nouveau 0000:01:00.0: can't change power state from D3cold to D0 (config
space inaccessible)"
followed by backtraces of kernel crashes or timeouts within nouveau.

It's still unkown why this issue exists, but this is a reliable workaround
and solves a very annoying issue for user having to choose between a
crashing kernel or higher power consumption of their Laptops.

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Mika Westerberg <mika.westerberg@intel.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205623
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: s390: vsie: Fix possible race when shadowing region 3 tables

[ Upstream commit 1493e0f944f3c319d11e067c185c904d01c17ae5 ]

We have to properly retry again by returning -EINVAL immediately in case
somebody else instantiated the table concurrently. We missed to add the
goto in this function only. The code now matches the other, similar
shadowing functions.

We are overwriting an existing region 2 table entry. All allocated pages
are added to the crst_list to be freed later, so they are not lost
forever. However, when unshadowing the region 2 table, we wouldn't trigger
unshadowing of the original shadowed region 3 table that we replaced. It
would get unshadowed when the original region 3 table is modified. As it's
not connected to the page table hierarchy anymore, it's not going to get
used anymore. However, for a limited time, this page table will stick
around, so it's in some sense a temporary memory leak.

Identified by manual code inspection. I don't think this classifies as
stable material.

Fixes: 998f637cc4b9 ("s390/mm: avoid races on region/segment/page table shadowing")
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200403153050.20569-4-david@redhat.com
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

compiler.h: fix error in BUILD_BUG_ON() reporting

[ Upstream commit af9c5d2e3b355854ff0e4acfbfbfadcd5198a349 ]

compiletime_assert() uses __LINE__ to create a unique function name.  This
means that if you have more than one BUILD_BUG_ON() in the same source
line (which can happen if they appear e.g.  in a macro), then the error
message from the compiler might output the wrong condition.

For this source file:

#include <linux/build_bug.h>

#define macro() \
BUILD_BUG_ON(1); \
BUILD_BUG_ON(0);

void foo()
{
macro();
}

gcc would output:

./include/linux/compiler.h:350:38: error: call to `__compiletime_assert_9' declared with attribute error: BUILD_BUG_ON failed: 0
  _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)

However, it was not the BUILD_BUG_ON(0) that failed, so it should say 1
instead of 0. With this patch, we use __COUNTER__ instead of __LINE__, so
each BUILD_BUG_ON() gets a different function name and the correct
condition is printed:

./include/linux/compiler.h:350:38: error: call to `__compiletime_assert_0' declared with attribute error: BUILD_BUG_ON failed: 1
  _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)

Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Daniel Santos <daniel.santos@pobox.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200331112637.25047-1-vegard.nossum@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

percpu_counter: fix a data race at vm_committed_as

[ Upstream commit 7e2345200262e4a6056580f0231cccdaffc825f3 ]

"vm_committed_as.count" could be accessed concurrently as reported by
KCSAN,

 BUG: KCSAN: data-race in __vm_enough_memory / percpu_counter_add_batch

 write to 0xffffffff9451c538 of 8 bytes by task 65879 on cpu 35:
  percpu_counter_add_batch+0x83/0xd0
  percpu_counter_add_batch at lib/percpu_counter.c:91
  __vm_enough_memory+0xb9/0x260
  dup_mm+0x3a4/0x8f0
  copy_process+0x2458/0x3240
  _do_fork+0xaa/0x9f0
  __do_sys_clone+0x125/0x160
  __x64_sys_clone+0x70/0x90
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 read to 0xffffffff9451c538 of 8 bytes by task 66773 on cpu 19:
  __vm_enough_memory+0x199/0x260
  percpu_counter_read_positive at include/linux/percpu_counter.h:81
  (inlined by) __vm_enough_memory at mm/util.c:839
  mmap_region+0x1b2/0xa10
  do_mmap+0x45c/0x700
  vm_mmap_pgoff+0xc0/0x130
  ksys_mmap_pgoff+0x6e/0x300
  __x64_sys_mmap+0x33/0x40
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

The read is outside percpu_counter::lock critical section which results in
a data race.  Fix it by adding a READ_ONCE() in
percpu_counter_read_positive() which could also service as the existing
compiler memory barrier.

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Marco Elver <elver@google.com>
Link: http://lkml.kernel.org/r/1582302724-2804-1-git-send-email-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

include/linux/swapops.h: correct guards for non_swap_entry()

[ Upstream commit 3f3673d7d324d872d9d8ddb73b3e5e47fbf12e0d ]

If CONFIG_DEVICE_PRIVATE is defined, but neither CONFIG_MEMORY_FAILURE nor
CONFIG_MIGRATION, then non_swap_entry() will return 0, meaning that the
condition (non_swap_entry(entry) && is_device_private_entry(entry)) in
zap_pte_range() will never be true even if the entry is a device private
one.

Equally any other code depending on non_swap_entry() will not function as
expected.

I originally spotted this just by looking at the code, I haven't actually
observed any problems.

Looking a bit more closely it appears that actually this situation
(currently at least) cannot occur:

DEVICE_PRIVATE depends on ZONE_DEVICE
ZONE_DEVICE depends on MEMORY_HOTREMOVE
MEMORY_HOTREMOVE depends on MIGRATION

Fixes: 5042db43cc26 ("mm/ZONE_DEVICE: new type of ZONE_DEVICE for unaddressable memory")
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Link: http://lkml.kernel.org/r/20200305130550.22693-1-steven.price@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/svm: fix vma range check for migration

[ Upstream commit b92103b559c77abc5f8b7bec269230a219c880b7 ]

find_vma_intersection(mm, start, end) only guarantees that end is greater
than or equal to vma->vm_start but doesn't guarantee that start is
greater than or equal to vma->vm_start. The calculation for the
intersecting range in nouveau_svmm_bind() isn't accounting for this and
can call migrate_vma_setup() with a starting address less than
vma->vm_start. This results in migrate_vma_setup() returning -EINVAL for
the range instead of nouveau skipping that part of the range and migrating
the rest.

Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/svm: check for SVM initialized before migrating

[ Upstream commit 822cab6150d3002952407a8297ff5a0d32bb7b54 ]

When migrating system memory to GPU memory, check that SVM has been
enabled. Even though most errors can be ignored since migration is
a performance optimization, return an error because this is a violation
of the API.

Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/hugetlb: fix build failure with HUGETLB_PAGE but not HUGEBTLBFS

[ Upstream commit bb297bb2de517e41199185021f043bbc5d75b377 ]

When CONFIG_HUGETLB_PAGE is set but not CONFIG_HUGETLBFS, the following
build failure is encoutered:

  In file included from arch/powerpc/mm/fault.c:33:0:
  include/linux/hugetlb.h: In function 'hstate_inode':
  include/linux/hugetlb.h:477:9: error: implicit declaration of function 'HUGETLBFS_SB' [-Werror=implicit-function-declaration]
    return HUGETLBFS_SB(i->i_sb)->hstate;
           ^
  include/linux/hugetlb.h:477:30: error: invalid type argument of '->' (have 'int')
    return HUGETLBFS_SB(i->i_sb)->hstate;
                                ^

Gate hstate_inode() with CONFIG_HUGETLBFS instead of CONFIG_HUGETLB_PAGE.

Fixes: a137e1cc6d6e ("hugetlbfs: per mount huge page sizes")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Link: http://lkml.kernel.org/r/7e8c3a3c9a587b9cd8a2f146df32a421b961f3a2.1584432148.git.christophe.leroy@c-s.fr
Link: https://patchwork.ozlabs.org/patch/1255548/#2386036
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: Allocate encryption header through kmalloc

[ Upstream commit 3946d0d04bb360acca72db5efe9ae8440012d9dc ]

When encryption is used, smb2_transform_hdr is defined on the stack and is
passed to the transport. This doesn't work with RDMA as the buffer needs to
be DMA'ed.

Fix it by using kmalloc.

Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: ubd: Prevent buffer overrun on command completion

[ Upstream commit 6e682d53fc1ef73a169e2a5300326cb23abb32ee ]

On the hypervisor side, when completing commands and the pipe is full,
we retry writing only the entries that failed, by offsetting
io_req_buffer, but we don't reduce the number of bytes written, which
can cause a buffer overrun of io_req_buffer, and write garbage to the
pipe.

Cc: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: do not commit super on read-only bdev

[ Upstream commit c96e2b8564adfb8ac14469ebc51ddc1bfecb3ae2 ]

Under some circumstances we may encounter a filesystem error on a
read-only block device, and if we try to save the error info to the
superblock and commit it, we'll wind up with a noisy error and
backtrace, i.e.:

[ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode #
------------[ cut here ]------------
generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2)
WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0
...

To avoid this, commit the error info in the superblock only if the
block device is writable.

Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/4b6e774d-cc00-3469-7abb-108eb151071a@sandeen.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/cpum_sf: Fix wrong page count in error message

[ Upstream commit 4141b6a5e9f171325effc36a22eb92bf961e7a5c ]

When perf record -e SF_CYCLES_BASIC_DIAG runs with very high
frequency, the samples arrive faster than the perf process can
save them to file. Eventually, for longer running processes, this
leads to the siutation where the trace buffers allocated by perf
slowly fills up. At one point the auxiliary trace buffer is full
and  the CPU Measurement sampling facility is turned off. Furthermore
a warning is printed to the kernel log buffer:

cpum_sf: The AUX buffer with 0 pages for the diagnostic-sampling
mode is full

The number of allocated pages for the auxiliary trace buffer is shown
as zero pages. That is wrong.

Fix this by saving the number of allocated pages before entering the
work loop in the interrupt handler. When the interrupt handler processes
the samples, it may detect the buffer full condition and stop sampling,
reducing the buffer size to zero.
Print the correct value in the error message:

cpum_sf: The AUX buffer with 256 pages for the diagnostic-sampling
mode is full

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/maple: Fix declaration made after definition

[ Upstream commit af6cf95c4d003fccd6c2ecc99a598fb854b537e7 ]

When building ppc64 defconfig, Clang errors (trimmed for brevity):

  arch/powerpc/platforms/maple/setup.c:365:1: error: attribute declaration
  must precede definition [-Werror,-Wignored-attributes]
  machine_device_initcall(maple, maple_cpc925_edac_setup);
  ^

machine_device_initcall expands to __define_machine_initcall, which in
turn has the macro machine_is used in it, which declares mach_##name
with an __attribute__((weak)). define_machine actually defines
mach_##name, which in this file happens before the declaration, hence
the warning.

To fix this, move define_machine after machine_device_initcall so that
the declaration occurs before the definition, which matches how
machine_device_initcall and define_machine work throughout
arch/powerpc.

While we're here, remove some spaces before tabs.

Fixes: 8f101a051ef0 ("edac: cpc925 MC platform device setup")
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200323222729.15365-1-natechancellor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/prom_init: Pass the "os-term" message to hypervisor

[ Upstream commit 74bb84e5117146fa73eb9d01305975c53022b3c3 ]

The "os-term" RTAS calls has one argument with a message address of OS
termination cause. rtas_os_term() already passes it but the recently
added prom_init's version of that missed it; it also does not fill
args correctly.

This passes the message address and initializes the number of arguments.

Fixes: 6a9c930bd775 ("powerpc/prom_init: Add the ESM call to prom_init")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200312074404.87293-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: add RCU locks around block group initialization

[ Upstream commit 29566c9c773456467933ee22bbca1c2b72a3506c ]

The space_info list is normally RCU protected and should be traversed
with rcu_read_lock held. There's a warning

  [29.104756] WARNING: suspicious RCU usage
  [29.105046] 5.6.0-rc4-next-20200305 #1 Not tainted
  [29.105231] -----------------------------
  [29.105401] fs/btrfs/block-group.c:2011 RCU-list traversed in non-reader section!!

pointing out that the locking is missing in btrfs_read_block_groups.
However this is not necessary as the list traversal happens at mount
time when there's no other thread potentially accessing the list.

To fix the warning and for consistency let's add the RCU lock/unlock,
the code won't be affected much as it's doing some lightweight
operations.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hibernate: Allow uswsusp to write to swap

[ Upstream commit 56939e014a6c212b317414faa307029e2e80c3b9 ]

It turns out that there is one use case for programs being able to
write to swap devices, and that is the userspace hibernation code.

Quick fix: disable the S_SWAPFILE check if hibernation is configured.

Fixes: dc617f29dbe5 ("vfs: don't allow writes to swap files")
Reported-by: Domenico Andreoli <domenico.andreoli@linux.com>
Reported-by: Marian Klein <mkleinsoft@gmail.com>
Signed-off-by: Domenico Andreoli <domenico.andreoli@linux.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/cpuinfo: fix wrong output when CPU0 is offline

[ Upstream commit 872f27103874a73783aeff2aac2b41a489f67d7c ]

/proc/cpuinfo should not print information about CPU 0 when it is offline.

Fixes: 281eaa8cb67c ("s390/cpuinfo: simplify locking and skip offline cpus early")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
[heiko.carstens@de.ibm.com: shortened commit message]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: Add a new CP flag to help fsck fix resize SPO issues

[ Upstream commit c84ef3c5e65ccf99a7a91a4d731ebb5d6331a178 ]

Add and set a new CP flag CP_RESIZEFS_FLAG during
online resize FS to help fsck fix the metadata mismatch
that may happen due to SPO during resize, where SB
got updated but CP data couldn't be written yet.

fsck errors -
Info: CKPT version = 6ed7bccb
        Wrong user_block_count(2233856)
[f2fs_do_mount:3365] Checkpoint is polluted

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: Fix mount failure due to SPO after a successful online resize FS

[ Upstream commit 682756827501dc52593bf490f2d437c65ec9efcb ]

Even though online resize is successfully done, a SPO immediately
after resize, still causes below error in the next mount.

[   11.294650] F2FS-fs (sda8): Wrong user_block_count: 2233856
[   11.300272] F2FS-fs (sda8): Failed to get valid F2FS checkpoint

This is because after FS metadata is updated in update_fs_metadata()
if the SBI_IS_DIRTY is not dirty, then CP will not be done to reflect
the new user_block_count.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: direct.c: Fix memory leak of dreq when nfs_get_lock_context fails

[ Upstream commit 8605cf0e852af3b2c771c18417499dc4ceed03d5 ]

When dreq is allocated by nfs_direct_req_alloc(), dreq->kref is
initialized to 2. Therefore we need to call nfs_direct_req_release()
twice to release the allocated dreq. Usually it is called in
nfs_file_direct_{read, write}() and nfs_direct_complete().

However, current code only calls nfs_direct_req_relese() once if
nfs_get_lock_context() fails in nfs_file_direct_{read, write}().
So, that case would result in memory leak.

Fix this by adding the missing call.

Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: uniphier-usb3ss: Add Pro5 support

[ Upstream commit 9376fa634afc207a3ce99e0957e04948c34d6510 ]

Pro5 SoC has same scheme of USB3 ss-phy as Pro4, so the data for Pro5 is
equivalent to Pro4.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to show norecovery mount option

[ Upstream commit a9117eca1de6b738e713d2142126db2cfbf6fb36 ]

Previously, 'norecovery' mount option will be shown as
'disable_roll_forward', fix to show original option name correctly.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Book3S HV: Fix H_CEDE return code for nested guests

[ Upstream commit 1f50cc1705350a4697923203fedd7d8fb1087fe2 ]

The h_cede_tm kvm-unit-test currently fails when run inside an L1 guest
via the guest/nested hypervisor.

  ./run-tests.sh -v
  ...
  TESTNAME=h_cede_tm TIMEOUT=90s ACCEL= ./powerpc/run powerpc/tm.elf -smp 2,threads=2 -machine cap-htm=on -append "h_cede_tm"
  FAIL h_cede_tm (2 tests, 1 unexpected failures)

While the test relates to transactional memory instructions, the actual
failure is due to the return code of the H_CEDE hypercall, which is
reported as 224 instead of 0. This happens even when no TM instructions
are issued.

224 is the value placed in r3 to execute a hypercall for H_CEDE, and r3
is where the caller expects the return code to be placed upon return.

In the case of guest running under a nested hypervisor, issuing H_CEDE
causes a return from H_ENTER_NESTED. In this case H_CEDE is
specially-handled immediately rather than later in
kvmppc_pseries_do_hcall() as with most other hcalls, but we forget to
set the return code for the caller, hence why kvm-unit-test sees the
224 return code and reports an error.

Guest kernels generally don't check the return value of H_CEDE, so
that likely explains why this hasn't caused issues outside of
kvm-unit-tests so far.

Fix this by setting r3 to 0 after we finish processing the H_CEDE.

RHBZ: 1778556

Fixes: 4bad77799fed ("KVM: PPC: Book3S HV: Handle hypercalls correctly when nested")
Cc: linuxppc-dev@ozlabs.org
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: rockchip: fix lvds-encoder ports subnode for rk3188-bqedison2qc

[ Upstream commit 1a7e99599dffd836fcb720cdc0eaf3cd43d7af4a ]

A test with the command below gives this error:

arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml: lvds-encoder:
'ports' is a required property

Fix error by adding a ports wrapper for port@0 and port@1
inside the 'lvds-encoder' node for rk3188-bqedison2qc.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/
bridge/lvds-codec.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200316174647.5598-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2: error out when relink swapfile

[ Upstream commit f5fdf1243fb750598b46305dd03c553949cfa14f ]

This fixes xfstests generic/356 failure on NFSv4.2.

Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4/pnfs: Return valid stateids in nfs_layout_find_inode_by_stateid()

[ Upstream commit d911c57a19551c6bef116a3b55c6b089901aacb0 ]

Make sure to test the stateid for validity so that we catch instances
where the server may have been reusing stateids in
nfs_layout_find_inode_by_stateid().

Fixes: 7b410d9ce460 ("pNFS: Delay getting the layout header in CB_LAYOUTRECALL handlers")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: alloc_nfs_open_context() must use the file cred when available

[ Upstream commit 1d179d6bd67369a52edea8562154b31ee20be1cc ]

If we're creating a nfs_open_context() for a specific file pointer,
we must use the cred assigned to that file.

Fixes: a52458b48af1 ("NFS/NFSD/SUNRPC: replace generic creds with 'struct cred'.")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: 88pm860x: fix possible race condition

[ Upstream commit 9cf4789e6e4673d0b2c96fa6bb0c35e81b43111a ]

The RTC IRQ is requested before the struct rtc_device is allocated,
this may lead to a NULL pointer dereference in the IRQ handler.

To fix this issue, allocating the rtc_device struct before requesting
the RTC IRQ using devm_rtc_allocate_device, and use rtc_register_device
to register the RTC device.

Also remove the unnecessary error message as the core already prints the
info.

Link: https://lore.kernel.org/r/20200311223956.51352-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-coherent: fix integer overflow in the reserved-memory dma allocation

[ Upstream commit 286c21de32b904131f8cf6a36ce40b8b0c9c5da3 ]

pageno is an int and the PAGE_SHIFT shift is done on an int,
overflowing if the memory is bigger than 2G

This can be reproduced using for example a reserved-memory of 4G

reserved-memory {
    #address-cells = <2>;
    #size-cells = <2>;
    ranges;

    reserved_dma: buffer@0 {
        compatible = "shared-dma-pool";
        no-map;
        reg = <0x5 0x00000000 0x1 0x0>;
        };
};

Signed-off-by: Kevin Grandemange <kevin.grandemange@allegrodvt.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: imx: gpc: fix power up sequencing

[ Upstream commit e0ea2d11f8a08ba7066ff897e16c5217215d1e68 ]

Currently we wait only until the PGC inverts the isolation setting
before disabling the peripheral clocks. This doesn't ensure that the
reset is properly propagated through the peripheral devices in the
power domain.

Wait until the PGC signals that the power up request is done and
wait a bit for resets to propagate before disabling the clocks.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: clearfog-gt-8k: set gigabit PHY reset deassert delay

[ Upstream commit 46f94c7818e7ab82758fca74935ef3d454340b4e ]

If the mv88e6xxx DSA driver is built as a module, it causes the
ethernet driver to re-probe when it's loaded. This in turn causes
the gigabit PHY to be momentarily reset and reprogrammed. However,
we attempt to reprogram the PHY immediately after deasserting reset,
and the PHY ignores the writes.

This results in the PHY operating in the wrong mode, and the copper
link states down.

Set a reset deassert delay of 10ms for the gigabit PHY to avoid this.

Fixes: babc5544c293 ("arm64: dts: clearfog-gt-8k: 1G eth PHY reset signal")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: tegra: Fix Tegra194 PCIe compatible string

[ Upstream commit f9f711efd441ad0d22874be49986d92121862335 ]

If the kernel configuration option CONFIG_PCIE_DW_PLAT_HOST is enabled
then this can cause the kernel to incorrectly probe the generic
designware PCIe platform driver instead of the Tegra194 designware PCIe
driver. This causes a boot failure on Tegra194 because the necessary
configuration to access the hardware is not performed.

The order in which the compatible strings are populated in Device-Tree
is not relevant in this case, because the kernel will attempt to probe
the device as soon as a driver is loaded and if the generic designware
PCIe driver is loaded first, then this driver will be probed first.
Therefore, to fix this problem, remove the "snps,dw-pcie" string from
the compatible string as we never want this driver to be probe on
Tegra194.

Fixes: 2602c32f15e7 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: tegra: Add PCIe endpoint controllers nodes for Tegra194

[ Upstream commit 0c988b731e6430f0081991fdb4f63f7fc837df9a ]

Add endpoint mode controllers nodes for the dual mode PCIe controllers
present in Tegra194 SoC.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: tegra: Fix Tegra PMC clock out parents

[ Upstream commit 6fe38aa8cac3a5db38154331742835a4d9740788 ]

Tegra PMC clocks clk_out_1, clk_out_2, and clk_out_3 supported parents
are osc, osc_div2, osc_div4 and extern clock.

Clock driver is using incorrect parents clk_m, clk_m_div2, clk_m_div4
for PMC clocks.

This patch fixes this.

Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: bq27xxx_battery: Silence deferred-probe error

[ Upstream commit 583b53ece0b0268c542a1eafadb62e3d4b0aab8c ]

The driver fails to probe with -EPROBE_DEFER if battery's power supply
(charger driver) isn't ready yet and this results in a bit noisy error
message in KMSG during kernel's boot up. Let's silence the harmless
error message.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: a64: Fix display clock register range

[ Upstream commit 3e9a1a8b7f811de3eb1445d72f68766b704ad17c ]

Register range of display clocks is 0x10000, as it can be seen from
DE2 documentation.

Fix it.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Fixes: 2c796fc8f5dbd ("arm64: dts: allwinner: a64: add necessary device tree nodes for DE2 CCU")
[wens@csie.org: added fixes tag]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: rockchip: fix vqmmc-supply property name for rk3188-bqedison2qc

[ Upstream commit 9cd568dc588c5d168615bf34f325fabe33b2c9a0 ]

A test with the command below does not detect all errors
in combination with 'additionalProperties: false' and
allOf:
  - $ref: "synopsys-dw-mshc-common.yaml#"
allOf:
  - $ref: "mmc-controller.yaml#"

'additionalProperties' applies to all properties that are not
accounted-for by 'properties' or 'patternProperties' in
the immediate schema.

First when we combine rockchip-dw-mshc.yaml,
synopsys-dw-mshc-common.yaml and mmc-controller.yaml it gives
this error:

arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml: mmc@10218000:
'vmmcq-supply' does not match any of the regexes:
'^.*@[0-9]+$',
'^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|
uhs-(sdr(12|25|50|104)|ddr50))$',
'pinctrl-[0-9]+'

'vmmcq-supply' is not a valid property name for mmc nodes.
Fix this error by renaming it to 'vqmmc-supply'.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200307134841.13803-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix the panic in do_checkpoint()

[ Upstream commit bf22c3cc8ce71454dddd772284773306a68031d8 ]

There could be a scenario where f2fs_sync_meta_pages() will not
ensure that all F2FS_DIRTY_META pages are submitted for IO. Thus,
resulting in the below panic in do_checkpoint() -

f2fs_bug_on(sbi, get_pages(sbi, F2FS_DIRTY_META) &&
!f2fs_cp_error(sbi));

This can happen in a low-memory condition, where shrinker could
also be doing the writepage operation (stack shown below)
at the same time when checkpoint is running on another core.

schedule
down_write
f2fs_submit_page_write -> by this time, this page in page cache is tagged
as PAGECACHE_TAG_WRITEBACK and PAGECACHE_TAG_DIRTY
is cleared, due to which f2fs_sync_meta_pages()
cannot sync this page in do_checkpoint() path.
f2fs_do_write_meta_page
__f2fs_write_meta_page
f2fs_write_meta_page
shrink_page_list
shrink_inactive_list
shrink_node_memcg
shrink_node
kswapd

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Enforce setting of a single FEC mode

[ Upstream commit 4bd9d5070b92da012f2715cf8e4859acb78b8f35 ]

Ethtool command allow setting of several FEC modes in a single set
command. The driver can only set a single FEC mode at a time. With this
patch driver will reply not-supported on setting several FEC modes.

Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: at91: usb: continue if clk_hw_round_rate() return zero

[ Upstream commit b0ecf1c6c6e82da4847900fad0272abfd014666d ]

clk_hw_round_rate() may call round rate function of its parents. In case
of SAM9X60 two of USB parrents are PLLA and UPLL. These clocks are
controlled by clk-sam9x60-pll.c driver. The round rate function for this
driver is sam9x60_pll_round_rate() which call in turn
sam9x60_pll_get_best_div_mul(). In case the requested rate is not in the
proper range (rate < characteristics->output[0].min &&
rate > characteristics->output[0].max) the sam9x60_pll_round_rate() will
return a negative number to its caller (called by
clk_core_round_rate_nolock()). clk_hw_round_rate() will return zero in
case a negative number is returned by clk_core_round_rate_nolock(). With
this, the USB clock will continue its rate computation even caller of
clk_hw_round_rate() returned an error. With this, the USB clock on SAM9X60
may not chose the best parent. I detected this after a suspend/resume
cycle on SAM9X60.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lkml.kernel.org/r/1579261009-4573-2-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: Don't cache errors from clk_ops::get_phase()

[ Upstream commit f21cf9c77ee82ef8adfeb2143adfacf21ec1d5cc ]

We don't check for errors from clk_ops::get_phase() before storing away
the result into the clk_core::phase member. This can lead to some fairly
confusing debugfs information if these ops do return an error. Let's
skip the store when this op fails to fix this. While we're here, move
the locking outside of clk_core_get_phase() to simplify callers from
the debugfs side.

Cc: Douglas Anderson <dianders@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200205232802.29184-2-sboyd@kernel.org
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/ttm: flush the fence on the bo after we individualize the reservation object

[ Upstream commit 1bbcf69e42fe7fd49b6f4339c970729d0e343753 ]

As we move the ttm_bo_individualize_resv() upwards, we need flush the
copied fence too. Otherwise the driver keeps waiting for fence.

run&Kill kfdtest, then perf top.

  25.53%  [ttm]                     [k] ttm_bo_delayed_delete
  24.29%  [kernel]                  [k] dma_resv_test_signaled_rcu
  19.72%  [kernel]                  [k] ww_mutex_lock

Fix: 378e2d5b("drm/ttm: fix ttm_bo_cleanup_refs_or_queue once more")
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/series/72339/
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/Hyper-V: Free hv_panic_page when fail to register kmsg dump

[ Upstream commit 7f11a2cc10a4ae3a70e2c73361f4a9a33503539b ]

If kmsg_dump_register() fails, hv_panic_page will not be used
anywhere.  So free and reset it.

Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-3-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rbd: call rbd_dev_unprobe() after unwatching and flushing notifies

[ Upstream commit 952c48b0ed18919bff7528501e9a3fff8a24f8cd ]

rbd_dev_unprobe() is supposed to undo most of rbd_dev_image_probe(),
including rbd_dev_header_info(), which means that rbd_dev_header_info()
isn't supposed to be called after rbd_dev_unprobe().

However, rbd_dev_image_release() calls rbd_dev_unprobe() before
rbd_unregister_watch().  This is racy because a header update notify
can sneak in:

  "rbd unmap" thread                   ceph-watch-notify worker

  rbd_dev_image_release()
    rbd_dev_unprobe()
      free and zero out header
                                       rbd_watch_cb()
                                         rbd_dev_refresh()
                                           rbd_dev_header_info()
                                             read in header

The same goes for "rbd map" because rbd_dev_image_probe() calls
rbd_dev_unprobe() on errors.  In both cases this results in a memory
leak.

Fixes: fd22aef8b47c ("rbd: move rbd_unregister_watch() call into rbd_dev_image_release()")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rbd: avoid a deadlock on header_rwsem when flushing notifies

[ Upstream commit 0e4e1de5b63fa423b13593337a27fd2d2b0bcf77 ]

rbd_unregister_watch() flushes notifies and therefore cannot be called
under header_rwsem because a header update notify takes header_rwsem to
synchronize with "rbd map".  If mapping an image fails after the watch
is established and a header update notify sneaks in, we deadlock when
erroring out from rbd_dev_image_probe().

Move watch registration and unregistration out of the critical section.
The only reason they were put there was to make header_rwsem management
slightly more obvious.

Fixes: 811c66887746 ("rbd: fix rbd map vs notify races")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block, bfq: invoke flush_idle_tree after reparent_active_queues in pd_offline

commit 4d38a87fbb77fb9ff2ff4e914162a8ae6453eff5 upstream.

In bfq_pd_offline(), the function bfq_flush_idle_tree() is invoked to
flush the rb tree that contains all idle entities belonging to the pd
(cgroup) being destroyed. In particular, bfq_flush_idle_tree() is
invoked before bfq_reparent_active_queues(). Yet the latter may happen
to add some entities to the idle tree. It happens if, in some of the
calls to bfq_bfqq_move() performed by bfq_reparent_active_queues(),
the queue to move is empty and gets expired.

This commit simply reverses the invocation order between
bfq_flush_idle_tree() and bfq_reparent_active_queues().

Tested-by: cki-project@redhat.com
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block, bfq: make reparent_leaf_entity actually work only on leaf entities

commit 576682fa52cbd95deb3773449566274f206acc58 upstream.

bfq_reparent_leaf_entity() reparents the input leaf entity (a leaf
entity represents just a bfq_queue in an entity tree). Yet, the input
entity is guaranteed to always be a leaf entity only in two-level
entity trees. In this respect, because of the error fixed by
commit 14afc5936197 ("block, bfq: fix overwrite of bfq_group pointer
in bfq_find_set_group()"), all (wrongly collapsed) entity trees happened
to actually have only two levels. After the latter commit, this does not
hold any longer.

This commit fixes this problem by modifying
bfq_reparent_leaf_entity(), so that it searches an active leaf entity
down the path that stems from the input entity. Such a leaf entity is
guaranteed to exist when bfq_reparent_leaf_entity() is invoked.

Tested-by: cki-project@redhat.com
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block, bfq: turn put_queue into release_process_ref in __bfq_bic_change_cgroup

commit c8997736650060594845e42c5d01d3118aec8d25 upstream.

A bfq_put_queue() may be invoked in __bfq_bic_change_cgroup(). The
goal of this put is to release a process reference to a bfq_queue. But
process-reference releases may trigger also some extra operation, and,
to this goal, are handled through bfq_release_process_ref(). So, turn
the invocation of bfq_put_queue() into an invocation of
bfq_release_process_ref().

Tested-by: cki-project@redhat.com
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

afs: Fix race between post-modification dir edit and readdir/d_revalidate

commit 2105c2820d366b76f38e6ad61c75771881ecc532 upstream.

AFS directories are retained locally as a structured file, with lookup
being effected by a local search of the file contents.  When a modification
(such as mkdir) happens, the dir file content is modified locally rather
than redownloading the directory.

The directory contents are accessed in a number of ways, with a number of
different locks schemes:

 (1) Download of contents - dvnode->validate_lock/write in afs_read_dir().

 (2) Lookup and readdir - dvnode->validate_lock/read in afs_dir_iterate(),
     downgrading from (1) if necessary.

 (3) d_revalidate of child dentry - dvnode->validate_lock/read in
     afs_do_lookup_one() downgrading from (1) if necessary.

 (4) Edit of dir after modification - page locks on individual dir pages.

Unfortunately, because (4) uses different locking scheme to (1) - (3),
nothing protects against the page being scanned whilst the edit is
underway.  Even download is not safe as it doesn't lock the pages - relying
instead on the validate_lock to serialise as a whole (the theory being that
directory contents are treated as a block and always downloaded as a
block).

Fix this by write-locking dvnode->validate_lock around the edits.  Care
must be taken in the rename case as there may be two different dirs - but
they need not be locked at the same time.  In any case, once the lock is
taken, the directory version must be rechecked, and the edit skipped if a
later version has been downloaded by revalidation (there can't have been
any local changes because the VFS holds the inode lock, but there can have
been remote changes).

Fixes: 63a4681ff39c ("afs: Locally edit directory data for mkdir/create/unlink/...")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

afs: Fix afs_d_validate() to set the right directory version

commit 40fc81027f892284ce31f8b6de1e497f5b47e71f upstream.

If a dentry's version is somewhere between invalid_before and the current
directory version, we should be setting it forward to the current version,
not backwards to the invalid_before version.  Note that we're only doing
this at all because dentry::d_fsdata isn't large enough on a 32-bit system.

Fix this by using a separate variable for invalid_before so that we don't
accidentally clobber the current dir version.

Fixes: a4ff7401fbfa ("afs: Keep track of invalid-before version for dentry coherency")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

afs: Fix rename operation status delivery

commit b98f0ec91c42d87a70da42726b852ac8d78a3257 upstream.

The afs_deliver_fs_rename() and yfs_deliver_fs_rename() functions both only
decode the second file status returned unless the parent directories are
different - unfortunately, this means that the xdr pointer isn't advanced
and the volsync record will be read incorrectly in such an instance.

Fix this by always decoding the second status into the second
status/callback block which wasn't being used if the dirs were the same.

The afs_update_dentry_version() calls that update the directory data
version numbers on the dentries can then unconditionally use the second
status record as this will always reflect the state of the destination dir
(the two records will be identical if the destination dir is the same as
the source dir)

Fixes: 260a980317da ("[AFS]: Add "directory write" support.")
Fixes: 30062bd13e36 ("afs: Implement YFS support in the fs client")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

afs: Fix decoding of inline abort codes from version 1 status records

commit 3e0d9892c0e7fa426ca6bf921cb4b543ca265714 upstream.

If we're decoding an AFSFetchStatus record and we see that the version is 1
and the abort code is set and we're expecting inline errors, then we store
the abort code and ignore the remaining status record (which is correct),
but we don't set the flag to say we got a valid abort code.

This can affect operation of YFS.RemoveFile2 when removing a file and the
operation of {,Y}FS.InlineBulkStatus when prospectively constructing or
updating of a set of inodes during a lookup.

Fix this to indicate the reception of a valid abort code.

Fixes: a38a75581e6e ("afs: Fix unlink to handle YFS.RemoveFile2 better")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

afs: Fix missing XDR advance in xdr_decode_{AFS,YFS}FSFetchStatus()

commit c72057b56f7e24865840a6961d801a7f21d30a5f upstream.

If we receive a status record that has VNOVNODE set in the abort field,
xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() don't advance
the XDR pointer, thereby corrupting anything subsequent decodes from the
same block of data.

This has the potential to affect AFS.InlineBulkStatus and
YFS.InlineBulkStatus operation, but probably doesn't since the status
records are extracted as individual blocks of data and the buffer pointer
is reset between blocks.

It does affect YFS.RemoveFile2 operation, corrupting the volsync record -
though that is not currently used.

Other operations abort the entire operation rather than returning an error
inline, in which case there is no decoding to be done.

Fix this by unconditionally advancing the xdr pointer.

Fixes: 684b0f68cf1c ("afs: Fix AFSFetchStatus decoder to provide OpenAFS compatibility")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/Hyper-V: Report crash data in die() when panic_on_oops is set

commit f3a99e761efa616028b255b4de58e9b5b87c5545 upstream.

When oops happens with panic_on_oops unset, the oops
thread is killed by die() and system continues to run.
In such case, guest should not report crash register
data to host since system still runs. Check panic_on_oops
and return directly in hyperv_report_panic() when the function
is called in the die() and panic_on_oops is unset. Fix it.

Fixes: 7ed4325a44ea ("Drivers: hv: vmbus: Make panic reporting to be more useful")
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-7-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/Hyper-V: Report crash register data when sysctl_record_panic_msg is not set

commit 040026df7088c56ccbad28f7042308f67bde63df upstream.

When sysctl_record_panic_msg is not set, the panic will
not be reported to Hyper-V via hyperv_report_panic_msg().
So the crash should be reported via hyperv_report_panic().

Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-6-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/Hyper-V: Report crash register data or kmsg before running crash kernel

commit a11589563e96bf262767294b89b25a9d44e7303b upstream.

We want to notify Hyper-V when a Linux guest VM crash occurs, so
there is a record of the crash even when kdump is enabled.   But
crash_kexec_post_notifiers defaults to "false", so the kdump kernel
runs before the notifiers and Hyper-V never gets notified.  Fix this by
always setting crash_kexec_post_notifiers to be true for Hyper-V VMs.

Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-5-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/Hyper-V: Trigger crash enlightenment only once during system crash.

commit 73f26e526f19afb3a06b76b970a76bcac2cafd05 upstream.

When a guest VM panics, Hyper-V should be notified only once via the
crash synthetic MSRs.  Current Linux code might write these crash MSRs
twice during a system panic:
1) hyperv_panic/die_event() calling hyperv_report_panic()
2) hv_kmsg_dump() calling hyperv_report_panic_msg()

Fix this by not calling hyperv_report_panic() if a kmsg dump has been
successfully registered.  The notification will happen later via
hyperv_report_panic_msg().

Fixes: 7ed4325a44ea ("Drivers: hv: vmbus: Make panic reporting to be more useful")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-4-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/Hyper-V: Unload vmbus channel in hv panic callback

commit 74347a99e73ae00b8385f1209aaea193c670f901 upstream.

When kdump is not configured, a Hyper-V VM might still respond to
network traffic after a kernel panic when kernel parameter panic=0.
The panic CPU goes into an infinite loop with interrupts enabled,
and the VMbus driver interrupt handler still works because the
VMbus connection is unloaded only in the kdump path.  The network
responses make the other end of the connection think the VM is
still functional even though it has panic'ed, which could affect any
failover actions that should be taken.

Fix this by unloading the VMbus connection during the panic process.
vmbus_initiate_unload() could then be called twice (e.g., by
hyperv_panic_event() and hv_crash_handler(), so reset the connection
state in vmbus_initiate_unload() to ensure the unload is done only
once.

Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-2-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: overlay: kmemleak in dup_and_fixup_symbol_prop()

commit 478ff649b1c8eb2409b1a54fb75eb46f7c29f140 upstream.

kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 4 of 5.

target_path was not freed in the non-error path.

Fixes: e0a58f3e08d4 ("of: overlay: remove a dependency on device node full_name")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: unittest: kmemleak in of_unittest_overlay_high_level()

commit 145fc138f9aae4f9e1331352e301df28e16aed35 upstream.

kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 3 of 5.

of_unittest_overlay_high_level() failed to kfree the newly created
property when the property named 'name' is skipped.

Fixes: 39a751a4cb7e ("of: change overlay apply input data from unflattened to FDT")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: unittest: kmemleak in of_unittest_platform_populate()

commit 216830d2413cc61be3f76bc02ffd905e47d2439e upstream.

kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 2 of 5.

of_unittest_platform_populate() left an elevated reference count for
grandchild nodes (which are platform devices).  Fix the platform
device reference counts so that the memory will be freed.

Fixes: fb2caa50fbac ("of/selftest: add testcase for nodes with same name and address")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: unittest: kmemleak on changeset destroy

commit b3fb36ed694b05738d45218ea72cf7feb10ce2b1 upstream.

kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 1 of 5.

of_unittest_changeset() reaches deeply into the dynamic devicetree
functions.  Several nodes were left with an elevated reference
count and thus were not properly cleaned up.  Fix the reference
counts so that the memory will be freed.

Fixes: 201c910bd689 ("of: Transactional DT support.")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xsk: Add missing check on user supplied headroom size

commit 99e3a236dd43d06c65af0a2ef9cb44306aef6e02 upstream.

Add a check that the headroom cannot be larger than the available
space in the chunk. In the current code, a malicious user can set the
headroom to a value larger than the chunk size minus the fixed XDP
headroom. That way packets with a length larger than the supported
size in the umem could get accepted and result in an out-of-bounds
write.

Fixes: c0c77d8fb787 ("xsk: add user memory registration support sockopt")
Reported-by: Bui Quang Minh <minhquangbui99@gmail.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=207225
Link: https://lore.kernel.org/bpf/1586849715-23490-1-git-send-email-magnus.karlsson@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Don't release card at firmware loading error

commit 25faa4bd37c10f19e4b848b9032a17a3d44c6f09 upstream.

At the error path of the firmware loading error, the driver tries to
release the card object and set NULL to drvdata.  This may be referred
badly at the possible PM action, as the driver itself is still bound
and the PM callbacks read the card object.

Instead, we continue the probing as if it were no option set.  This is
often a better choice than the forced abort, too.

Fixes: 5cb543dba986 ("ALSA: hda - Deferred probing with request_firmware_nowait()")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Link: https://lore.kernel.org/r/20200413082034.25166-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/mbigen: Free msi_desc on device teardown

commit edfc23f6f9fdbd7825d50ac1f380243cde19b679 upstream.

Using irq_domain_free_irqs_common() on the irqdomain free path will
leave the MSI descriptor unfreed when platform devices get removed.
Properly free it by MSI domain free function.

Fixes: 9650c60ebfec0 ("irqchip/mbigen: Create irq domain for each mbigen device")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200408114352.1604-1-yuzenghui@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: report EOPNOTSUPP on unsupported flags/object type

commit d9583cdf2f38d0f526d9a8c8564dd2e35e649bc7 upstream.

EINVAL should be used for malformed netlink messages. New userspace
utility and old kernels might easily result in EINVAL when exercising
new set features, which is misleading.

Fixes: 8aeff920dcc9 ("netfilter: nf_tables: add stateful object reference to set elements")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild, btf: Fix dependencies for DEBUG_INFO_BTF

commit 7d32e69310d67e6b04af04f26193f79dfc2f05c7 upstream.

Currently turning on DEBUG_INFO_SPLIT when DEBUG_INFO_BTF is also
enabled will produce invalid btf file, since gen_btf function in
link-vmlinux.sh script doesn't handle *.dwo files.

Enabling DEBUG_INFO_REDUCED will also produce invalid btf file,
and using GCC_PLUGIN_RANDSTRUCT with BTF makes no sense.

Fixes: e83b9f55448a ("kbuild: add ability to generate BTF type info for vmlinux")
Reported-by: Jann Horn <jannh@google.com>
Reported-by: Liu Yiding <liuyd.fnst@cn.fujitsu.com>
Signed-off-by: Slava Bacherikov <slava@bacher09.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: KP Singh <kpsingh@google.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200402204138.408021-1-slava@bacher09.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx6: Use gpc for FEC interrupt controller to fix wake on LAN.

commit 4141f1a40fc0789f6fd4330e171e1edf155426aa upstream.

In order to wake from suspend by ethernet magic packets the GPC
must be used as intc does not have wakeup functionality.

But the FEC DT node currently uses interrupt-extended,
specificying intc, thus breaking WoL.

This problem is probably fallout from the stacked domain conversion
as intc used to chain to GPC.

So replace "interrupts-extended" by "interrupts" to use the default
parent which is GPC.

Fixes: b923ff6af0d5 ("ARM: imx6: convert GPC to stacked domains")

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Honor PM disablement in PM freeze and thaw_noirq ops

commit 10db5bccc390e8e4bd9fcd1fbd4f1b23f271a405 upstream.

freeze_noirq and thaw_noirq need to check the PM availability like
other PM ops.  There are cases where the device got disabled due to
the error, and the PM operation should be ignored for that.

Fixes: 3e6db33aaf1d ("ALSA: hda - Set SKL+ hda controller power at freeze() and thaw()")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Link: https://lore.kernel.org/r/20200413082034.25166-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: sg: add sg_remove_request in sg_common_write

commit 849f8583e955dbe3a1806e03ecacd5e71cce0a08 upstream.

If the dxfer_len is greater than 256M then the request is invalid and we
need to call sg_remove_request in sg_common_write.

Link: https://lore.kernel.org/r/1586777361-17339-1-git-send-email-huawei.libin@huawei.com
Fixes: f930c7043663 ("scsi: sg: only check for dxfer_len greater than 256M")
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

objtool: Fix switch table detection in .text.unlikely

commit b401efc120a399dfda1f4d2858a4de365c9b08ef upstream.

If a switch jump table's indirect branch is in a ".cold" subfunction in
.text.unlikely, objtool doesn't detect it, and instead prints a false
warning:

  drivers/media/v4l2-core/v4l2-ioctl.o: warning: objtool: v4l_print_format.cold()+0xd6: sibling call from callable instruction with modified stack frame
  drivers/hwmon/max6650.o: warning: objtool: max6650_probe.cold()+0xa5: sibling call from callable instruction with modified stack frame
  drivers/media/dvb-frontends/drxk_hard.o: warning: objtool: init_drxk.cold()+0x16f: sibling call from callable instruction with modified stack frame

Fix it by comparing the function, instead of the section and offset.

Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/157c35d42ca9b6354bbb1604fe9ad7d1153ccb21.1585761021.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm, bpf: Fix offset overflow for BPF_MEM BPF_DW

commit 4178417cc5359c329790a4a8f4a6604612338cca upstream.

This patch fixes an incorrect check in how immediate memory offsets are
computed for BPF_DW on arm.

For BPF_LDX/ST/STX + BPF_DW, the 32-bit arm JIT breaks down an 8-byte
access into two separate 4-byte accesses using off+0 and off+4. If off
fits in imm12, the JIT emits a ldr/str instruction with the immediate
and avoids the use of a temporary register. While the current check off
<= 0xfff ensures that the first immediate off+0 doesn't overflow imm12,
it's not sufficient for the second immediate off+4, which may cause the
second access of BPF_DW to read/write the wrong address.

This patch fixes the problem by changing the check to
off <= 0xfff - 4 for BPF_DW, ensuring off+4 will never overflow.

A side effect of simplifying the check is that it now allows using
negative immediate offsets in ldr/str. This means that small negative
offsets can also avoid the use of a temporary register.

This patch introduces no new failures in test_verifier or test_bpf.c.

Fixes: c5eae692571d6 ("ARM: net: bpf: improve 64-bit store implementation")
Fixes: ec19e02b343db ("ARM: net: bpf: fix LDX instructions")
Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200409221752.28448-1-luke.r.nels@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm, bpf: Fix bugs with ALU64 {RSH, ARSH} BPF_K shift by 0

commit bb9562cf5c67813034c96afb50bd21130a504441 upstream.

The current arm BPF JIT does not correctly compile RSH or ARSH when the
immediate shift amount is 0. This causes the "rsh64 by 0 imm" and "arsh64
by 0 imm" BPF selftests to hang the kernel by reaching an instruction
the verifier determines to be unreachable.

The root cause is in how immediate right shifts are encoded on arm.
For LSR and ASR (logical and arithmetic right shift), a bit-pattern
of 00000 in the immediate encodes a shift amount of 32. When the BPF
immediate is 0, the generated code shifts by 32 instead of the expected
behavior (a no-op).

This patch fixes the bugs by adding an additional check if the BPF
immediate is 0. After the change, the above mentioned BPF selftests pass.

Fixes: 39c13c204bb11 ("arm: eBPF JIT compiler")
Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200408181229.10909-1-luke.r.nels@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xsk: Fix out of boundary write in __xsk_rcv_memcpy

commit db5c97f02373917efe2c218ebf8e3d8b19e343b6 upstream.

first_len is the remainder of the first page we're copying.
If this size is larger, then out of page boundary write will
otherwise happen.

Fixes: c05cd3645814 ("xsk: add support to allow unaligned chunk placement")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1585813930-19712-1-git-send-email-lirongqing@baidu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: sp805: fix restart handler

commit ea104a9e4d3e9ebc26fb78dac35585b142ee288b upstream.

The restart handler is missing two things, first, the registers
has to be unlocked and second there is no synchronization for the
write_relaxed() calls.

This was tested on a custom board with the NXP LS1028A SoC.

Fixes: 6c5c0d48b686c ("watchdog: sp805: add restart handler")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200327162450.28506-1-michael@walle.cc
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: use non-movable memory for superblock readahead

commit d87f639258a6a5980183f11876c884931ad93da2 upstream.

Since commit a8ac900b8163 ("ext4: use non-movable memory for the
superblock") buffers for ext4 superblock were allocated using
the sb_bread_unmovable() helper which allocated buffer heads
out of non-movable memory blocks. It was necessarily to not block
page migrations and do not cause cma allocation failures.

However commit 85c8f176a611 ("ext4: preload block group descriptors")
broke this by introducing pre-reading of the ext4 superblock.
The problem is that __breadahead() is using __getblk() underneath,
which allocates buffer heads out of movable memory.

It resulted in page migration failures I've seen on a machine
with an ext4 partition and a preallocated cma area.

Fix this by introducing sb_breadahead_unmovable() and
__breadahead_gfp() helpers which use non-movable memory for buffer
head allocations and use them for the ext4 superblock readahead.

Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Fixes: 85c8f176a611 ("ext4: preload block group descriptors")
Signed-off-by: Roman Gushchin <guro@fb.com>
Link: https://lore.kernel.org/r/20200229001411.128010-1-guro@fb.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.4.34