review.tizen.org Git - platform/kernel/linux-rpi.git/log

geneve: use the correct nlattr array in NL_SET_ERR_MSG_ATTR

[ Upstream commit 9a7b5b50de8a764671ba1800fe4c52d3b7013901 ]

IFLA_GENEVE_* attributes are in the data array, which is correctly
used when fetching the value, but not when setting the extended
ack. Because IFLA_GENEVE_MAX < IFLA_MAX, we avoid out of bounds
array accesses, but we don't provide a pointer to the invalid
attribute to userspace.

Fixes: a025fb5f49ad ("geneve: Allow configuration of DF behaviour")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vxlan: use the correct nlattr array in NL_SET_ERR_MSG_ATTR

[ Upstream commit cc8e7c69db4dcc565ed3020f97ddd6debab6cbe8 ]

IFLA_VXLAN_* attributes are in the data array, which is correctly
used when fetching the value, but not when setting the extended
ack. Because IFLA_VXLAN_MAX < IFLA_MAX, we avoid out of bounds
array accesses, but we don't provide a pointer to the invalid
attribute to userspace.

Fixes: 653ef6a3e4af ("vxlan: change vxlan_[config_]validate() to use netlink_ext_ack for error reporting")
Fixes: b4d3069783bc ("vxlan: Allow configuration of DF behaviour")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: b53: b53_arl_rw_op() needs to select IVL or SVL

[ Upstream commit 64fec9493f7dc9bdd7233bcfe98985c45bd0e3c1 ]

Flip the IVL_SVL_SELECT bit correctly based on the VLAN enable status,
the default is to perform Shared VLAN learning instead of Individual
learning.

Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: b53: Rework ARL bin logic

[ Upstream commit 6344dbde6a27d10d16246d734b968f84887841e2 ]

When asking the ARL to read a MAC address, we will get a number of bins
returned in a single read. Out of those bins, there can essentially be 3
states:

- all bins are full, we have no space left, and we can either replace an
  existing address or return that full condition

- the MAC address was found, then we need to return its bin index and
  modify that one, and only that one

- the MAC address was not found and we have a least one bin free, we use
  that bin index location then

The code would unfortunately fail on all counts.

Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: b53: Fix ARL register definitions

[ Upstream commit c2e77a18a7ed65eb48f6e389b6a59a0fd753646a ]

The ARL {MAC,VID} tuple and the forward entry were off by 0x10 bytes,
which means that when we read/wrote from/to ARL bin index 0, we were
actually accessing the ARLA_RWCTRL register.

Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: b53: Fix valid setting for MDB entries

[ Upstream commit eab167f4851a19c514469dfa81147f77e17b5b20 ]

When support for the MDB entries was added, the valid bit was correctly
changed to be assigned depending on the remaining port bitmask, that is,
if there were no more ports added to the entry's port bitmask, the entry
now becomes invalid. There was another assignment a few lines below that
would override this which would invalidate entries even when there were
still multiple ports left in the MDB entry.

Fixes: 5d65b64a3d97 ("net: dsa: b53: Add support for MDB")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: b53: Lookup VID in ARL searches when VLAN is enabled

[ Upstream commit 2e97b0cd1651a270f3a3fcf42115c51f3284c049 ]

When VLAN is enabled, and an ARL search is issued, we also need to
compare the full {MAC,VID} tuple before returning a successful search
result.

Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vrf: Fix IPv6 with qdisc and xfrm

[ Upstream commit a53c102872ad6e34e1518e25899dc9498c27f8b1 ]

When a qdisc is attached to the VRF device, the packet goes down the ndo
xmit function which is setup to send the packet back to the VRF driver
which does a lookup to send the packet out. The lookup in the VRF driver
is not considering xfrm policies. Change it to use ip6_dst_lookup_flow
rather than ip6_route_output.

Fixes: 35402e313663 ("net: Add IPv6 support to VRF device")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

team: fix hang in team_mode_get()

[ Upstream commit 1c30fbc76b8f0c07c92a8ca4cd7c456612e17eb5 ]

When team mode is changed or set, the team_mode_get() is called to check
whether the mode module is inserted or not. If the mode module is not
inserted, it calls the request_module().
In the request_module(), it creates a child process, which is
the "modprobe" process and waits for the done of the child process.
At this point, the following locks were used.
down_read(&cb_lock()); by genl_rcv()
    genl_lock(); by genl_rcv_msc()
        rtnl_lock(); by team_nl_cmd_options_set()
            mutex_lock(&team->lock); by team_nl_team_get()

Concurrently, the team module could be removed by rmmod or "modprobe -r"
The __exit function of team module is team_module_exit(), which calls
team_nl_fini() and it tries to acquire following locks.
down_write(&cb_lock);
    genl_lock();
Because of the genl_lock() and cb_lock, this process can't be finished
earlier than request_module() routine.

The problem secenario.
CPU0                                     CPU1
team_mode_get
    request_module()
                                         modprobe -r team_mode_roundrobin
                                                     team <--(B)
        modprobe team <--(A)
            team_mode_roundrobin

By request_module(), the "modprobe team_mode_roundrobin" command
will be executed. At this point, the modprobe process will decide
that the team module should be inserted before team_mode_roundrobin.
Because the team module is being removed.

By the module infrastructure, the same module insert/remove operations
can't be executed concurrently.
So, (A) waits for (B) but (B) also waits for (A) because of locks.
So that the hang occurs at this point.

Test commands:
    while :
    do
        teamd -d &
killall teamd &
modprobe -rv team_mode_roundrobin &
    done

The approach of this patch is to hold the reference count of the team
module if the team module is compiled as a module. If the reference count
of the team module is not zero while request_module() is being called,
the team module will not be removed at that moment.
So that the above scenario could not occur.

Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: cache line align MAX_TCP_HEADER

[ Upstream commit 9bacd256f1354883d3c1402655153367982bba49 ]

TCP stack is dumb in how it cooks its output packets.

Depending on MAX_HEADER value, we might chose a bad ending point
for the headers.

If we align the end of TCP headers to cache line boundary, we
make sure to always use the smallest number of cache lines,
which always help.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: Fix suppress test in fib_tests.sh

[ Upstream commit 2c1dd4c110627c2a4f006643f074119205cfcff4 ]

fib_tests is spewing errors:
    ...
    Cannot open network namespace "ns1": No such file or directory
    Cannot open network namespace "ns1": No such file or directory
    Cannot open network namespace "ns1": No such file or directory
    Cannot open network namespace "ns1": No such file or directory
    ping: connect: Network is unreachable
    Cannot open network namespace "ns1": No such file or directory
    Cannot open network namespace "ns1": No such file or directory
    ...

Each test entry in fib_tests is supposed to do its own setup and
cleanup. Right now the $IP commands in fib_suppress_test are
failing because there is no ns1. Add the setup/cleanup and logging
expected for each test.

Fixes: ca7a03c41753 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule")
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched: etf: do not assume all sockets are full blown

[ Upstream commit a1211bf9a7774706722ba3b18c6157d980319f79 ]

skb->sk does not always point to a full blown socket,
we need to use sk_fullsock() before accessing fields which
only make sense on full socket.

BUG: KASAN: use-after-free in report_sock_error+0x286/0x300 net/sched/sch_etf.c:141
Read of size 1 at addr ffff88805eb9b245 by task syz-executor.5/9630

CPU: 1 PID: 9630 Comm: syz-executor.5 Not tainted 5.7.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x188/0x20d lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd3/0x315 mm/kasan/report.c:382
__kasan_report.cold+0x35/0x4d mm/kasan/report.c:511
kasan_report+0x33/0x50 mm/kasan/common.c:625
report_sock_error+0x286/0x300 net/sched/sch_etf.c:141
etf_enqueue_timesortedlist+0x389/0x740 net/sched/sch_etf.c:170
__dev_xmit_skb net/core/dev.c:3710 [inline]
__dev_queue_xmit+0x154a/0x30a0 net/core/dev.c:4021
neigh_hh_output include/net/neighbour.h:499 [inline]
neigh_output include/net/neighbour.h:508 [inline]
ip6_finish_output2+0xfb5/0x25b0 net/ipv6/ip6_output.c:117
__ip6_finish_output+0x442/0xab0 net/ipv6/ip6_output.c:143
ip6_finish_output+0x34/0x1f0 net/ipv6/ip6_output.c:153
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip6_output+0x239/0x810 net/ipv6/ip6_output.c:176
dst_output include/net/dst.h:435 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
ip6_xmit+0xe1a/0x2090 net/ipv6/ip6_output.c:280
tcp_v6_send_synack+0x4e7/0x960 net/ipv6/tcp_ipv6.c:521
tcp_rtx_synack+0x10d/0x1a0 net/ipv4/tcp_output.c:3916
inet_rtx_syn_ack net/ipv4/inet_connection_sock.c:669 [inline]
reqsk_timer_handler+0x4c2/0xb40 net/ipv4/inet_connection_sock.c:763
call_timer_fn+0x1ac/0x780 kernel/time/timer.c:1405
expire_timers kernel/time/timer.c:1450 [inline]
__run_timers kernel/time/timer.c:1774 [inline]
__run_timers kernel/time/timer.c:1741 [inline]
run_timer_softirq+0x623/0x1600 kernel/time/timer.c:1787
__do_softirq+0x26c/0x9f7 kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x192/0x1d0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:546 [inline]
smp_apic_timer_interrupt+0x19e/0x600 arch/x86/kernel/apic/apic.c:1140
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829
</IRQ>
RIP: 0010:des_encrypt+0x157/0x9c0 lib/crypto/des.c:792
Code: 85 22 06 00 00 41 31 dc 41 8b 4d 04 44 89 e2 41 83 e4 3f 4a 8d 3c a5 60 72 72 88 81 e2 3f 3f 3f 3f 48 89 f8 48 c1 e8 03 31 d9 <0f> b6 34 28 48 89 f8 c1 c9 04 83 e0 07 83 c0 03 40 38 f0 7c 09 40
RSP: 0018:ffffc90003b5f6c0 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13
RAX: 1ffffffff10e4e55 RBX: 00000000d2f846d0 RCX: 00000000d2f846d0
RDX: 0000000012380612 RSI: ffffffff839863ca RDI: ffffffff887272a8
RBP: dffffc0000000000 R08: ffff888091d0a380 R09: 0000000000800081
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000012
R13: ffff8880a8ae8078 R14: 00000000c545c93e R15: 0000000000000006
cipher_crypt_one crypto/cipher.c:75 [inline]
crypto_cipher_encrypt_one+0x124/0x210 crypto/cipher.c:82
crypto_cbcmac_digest_update+0x1b5/0x250 crypto/ccm.c:830
crypto_shash_update+0xc4/0x120 crypto/shash.c:119
shash_ahash_update+0xa3/0x110 crypto/shash.c:246
crypto_ahash_update include/crypto/hash.h:547 [inline]
hash_sendmsg+0x518/0xad0 crypto/algif_hash.c:102
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:672
____sys_sendmsg+0x308/0x7e0 net/socket.c:2362
___sys_sendmsg+0x100/0x170 net/socket.c:2416
__sys_sendmmsg+0x195/0x480 net/socket.c:2506
__do_sys_sendmmsg net/socket.c:2535 [inline]
__se_sys_sendmmsg net/socket.c:2532 [inline]
__x64_sys_sendmmsg+0x99/0x100 net/socket.c:2532
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x45c829
Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f6d9528ec78 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00000000004fc080 RCX: 000000000045c829
RDX: 0000000000000001 RSI: 0000000020002640 RDI: 0000000000000004
RBP: 000000000078bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000008d7 R14: 00000000004cb7aa R15: 00007f6d9528f6d4

Fixes: 4b15c7075352 ("net/sched: Make etf report drops on error_queue")
Fixes: 25db26a91364 ("net/sched: Introduce the ETF Qdisc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/x25: Fix x25_neigh refcnt leak when receiving frame

[ Upstream commit f35d12971b4d814cdb2f659d76b42f0c545270b6 ]

x25_lapb_receive_frame() invokes x25_get_neigh(), which returns a
reference of the specified x25_neigh object to "nb" with increased
refcnt.

When x25_lapb_receive_frame() returns, local variable "nb" becomes
invalid, so the refcount should be decreased to keep refcount balanced.

The reference counting issue happens in one path of
x25_lapb_receive_frame(). When pskb_may_pull() returns false, the
function forgets to decrease the refcnt increased by x25_get_neigh(),
causing a refcnt leak.

Fix this issue by calling x25_neigh_put() when pskb_may_pull() returns
false.

Fixes: cb101ed2c3c7 ("x25: Handle undersized/fragmented skbs")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: dwmac-meson8b: Add missing boundary to RGMII TX clock array

[ Upstream commit f0212a5ebfa6cd789ab47666b9cc169e6e688732 ]

Running with KASAN on a VIM3L systems leads to the following splat
when probing the Ethernet device:

==================================================================
BUG: KASAN: global-out-of-bounds in _get_maxdiv+0x74/0xd8
Read of size 4 at addr ffffa000090615f4 by task systemd-udevd/139
CPU: 1 PID: 139 Comm: systemd-udevd Tainted: G E 5.7.0-rc1-00101-g8624b7577b9c #781
Hardware name: amlogic w400/w400, BIOS 2020.01-rc5 03/12/2020
Call trace:
dump_backtrace+0x0/0x2a0
show_stack+0x20/0x30
dump_stack+0xec/0x148
print_address_description.isra.12+0x70/0x35c
__kasan_report+0xfc/0x1d4
kasan_report+0x4c/0x68
__asan_load4+0x9c/0xd8
_get_maxdiv+0x74/0xd8
clk_divider_bestdiv+0x74/0x5e0
clk_divider_round_rate+0x80/0x1a8
clk_core_determine_round_nolock.part.9+0x9c/0xd0
clk_core_round_rate_nolock+0xf0/0x108
clk_hw_round_rate+0xac/0xf0
clk_factor_round_rate+0xb8/0xd0
clk_core_determine_round_nolock.part.9+0x9c/0xd0
clk_core_round_rate_nolock+0xf0/0x108
clk_core_round_rate_nolock+0xbc/0x108
clk_core_set_rate_nolock+0xc4/0x2e8
clk_set_rate+0x58/0xe0
meson8b_dwmac_probe+0x588/0x72c [dwmac_meson8b]
platform_drv_probe+0x78/0xd8
really_probe+0x158/0x610
driver_probe_device+0x140/0x1b0
device_driver_attach+0xa4/0xb0
__driver_attach+0xcc/0x1c8
bus_for_each_dev+0xf4/0x168
driver_attach+0x3c/0x50
bus_add_driver+0x238/0x2e8
driver_register+0xc8/0x1e8
__platform_driver_register+0x88/0x98
meson8b_dwmac_driver_init+0x28/0x1000 [dwmac_meson8b]
do_one_initcall+0xa8/0x328
do_init_module+0xe8/0x368
load_module+0x3300/0x36b0
__do_sys_finit_module+0x120/0x1a8
__arm64_sys_finit_module+0x4c/0x60
el0_svc_common.constprop.2+0xe4/0x268
do_el0_svc+0x98/0xa8
el0_svc+0x24/0x68
el0_sync_handler+0x12c/0x318
el0_sync+0x158/0x180

The buggy address belongs to the variable:
div_table.63646+0x34/0xfffffffffffffa40 [dwmac_meson8b]

Memory state around the buggy address:
ffffa00009061480: fa fa fa fa 00 00 00 01 fa fa fa fa 00 00 00 00
ffffa00009061500: 05 fa fa fa fa fa fa fa 00 04 fa fa fa fa fa fa
>ffffa00009061580: 00 03 fa fa fa fa fa fa 00 00 00 00 00 00 fa fa
^
ffffa00009061600: fa fa fa fa 00 01 fa fa fa fa fa fa 01 fa fa fa
ffffa00009061680: fa fa fa fa 00 01 fa fa fa fa fa fa 04 fa fa fa
==================================================================

Digging into this indeed shows that the clock divider array is
lacking a final fence, and that the clock subsystems goes in the
weeds. Oh well.

Let's add the empty structure that indicates the end of the array.

Fixes: bd6f48546b9c ("net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: openvswitch: ovs_ct_exit to be done under ovs_lock

[ Upstream commit 27de77cec985233bdf6546437b9761853265c505 ]

syzbot wrote:
| =============================
| WARNING: suspicious RCU usage
| 5.7.0-rc1+ #45 Not tainted
| -----------------------------
| net/openvswitch/conntrack.c:1898 RCU-list traversed in non-reader section!!
|
| other info that might help us debug this:
| rcu_scheduler_active = 2, debug_locks = 1
| ...
|
| stack backtrace:
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
| Workqueue: netns cleanup_net
| Call Trace:
| ...
| ovs_ct_exit
| ovs_exit_net
| ops_exit_list.isra.7
| cleanup_net
| process_one_work
| worker_thread

To avoid that warning, invoke the ovs_ct_exit under ovs_lock and add
lockdep_ovsl_is_held as optional lockdep expression.

Link: https://lore.kernel.org/lkml/000000000000e642a905a0cbee6e@google.com
Fixes: 11efd5cb04a1 ("openvswitch: Support conntrack zone limit")
Cc: Pravin B Shelar <pshelar@ovn.org>
Cc: Yi-Hung Wei <yihung.wei@gmail.com>
Reported-by: syzbot+7ef50afd3a211f879112@syzkaller.appspotmail.com
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: netrom: Fix potential nr_neigh refcnt leak in nr_add_node

[ Upstream commit d03f228470a8c0a22b774d1f8d47071e0de4f6dd ]

nr_add_node() invokes nr_neigh_get_dev(), which returns a local
reference of the nr_neigh object to "nr_neigh" with increased refcnt.

When nr_add_node() returns, "nr_neigh" becomes invalid, so the refcount
should be decreased to keep refcount balanced.

The issue happens in one normal path of nr_add_node(), which forgets to
decrease the refcnt increased by nr_neigh_get_dev() and causes a refcnt
leak. It should decrease the refcnt before the function returns like
other normal paths do.

Fix this issue by calling nr_neigh_put() before the nr_add_node()
returns.

Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4_en: avoid indirect call in TX completion

[ Upstream commit 310660a14b74c380b0ef5c12b66933d6a3d1b59f ]

Commit 9ecc2d86171a ("net/mlx4_en: add xdp forwarding and data write support")
brought another indirect call in fast path.

Use INDIRECT_CALL_2() helper to avoid the cost of the indirect call
when/if CONFIG_RETPOLINE=y

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bcmgenet: correct per TX/RX ring statistics

[ Upstream commit a6d0b83f25073bdf08b8547aeff961a62c6ab229 ]

The change to track net_device_stats per ring to better support SMP
missed updating the rx_dropped member.

The ndo_get_stats method is also needed to combine the results for
ethtool statistics (-S) before filling in the ethtool structure.

Fixes: 37a30b435b92 ("net: bcmgenet: Track per TX/RX rings statistics")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlxsw: Fix some IS_ERR() vs NULL bugs

[ Upstream commit c391eb8366ae052d571bb2841f1ccb4d39f3ceb8 ]

The mlxsw_sp_acl_rulei_create() function is supposed to return an error
pointer from mlxsw_afa_block_create(). The problem is that these
functions both return NULL instead of error pointers. Half the callers
expect NULL and half expect error pointers so it could lead to a NULL
dereference on failure.

This patch changes both of them to return error pointers and changes all
the callers which checked for NULL to check for IS_ERR() instead.

Fixes: 4cda7d8d7098 ("mlxsw: core: Introduce flexible actions support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macvlan: fix null dereference in macvlan_device_event()

[ Upstream commit 4dee15b4fd0d61ec6bbd179238191e959d34cf7a ]

In the macvlan_device_event(), the list_first_entry_or_null() is used.
This function could return null pointer if there is no node.
But, the macvlan module doesn't check the null pointer.
So, null-ptr-deref would occur.

      bond0
        |
   +----+-----+
   |          |
macvlan0   macvlan1
   |          |
dummy0     dummy1

The problem scenario.
If dummy1 is removed,
1. ->dellink() of dummy1 is called.
2. NETDEV_UNREGISTER of dummy1 notification is sent to macvlan module.
3. ->dellink() of macvlan1 is called.
4. NETDEV_UNREGISTER of macvlan1 notification is sent to bond module.
5. __bond_release_one() is called and it internally calls
   dev_set_mac_address().
6. dev_set_mac_address() calls the ->ndo_set_mac_address() of macvlan1,
   which is macvlan_set_mac_address().
7. macvlan_set_mac_address() calls the dev_set_mac_address() with dummy1.
8. NETDEV_CHANGEADDR of dummy1 is sent to macvlan module.
9. In the macvlan_device_event(), it calls list_first_entry_or_null().
At this point, dummy1 and macvlan1 were removed.
So, list_first_entry_or_null() will return NULL.

Test commands:
    ip netns add nst
    ip netns exec nst ip link add bond0 type bond
    for i in {0..10}
    do
        ip netns exec nst ip link add dummy$i type dummy
ip netns exec nst ip link add macvlan$i link dummy$i \
type macvlan mode passthru
ip netns exec nst ip link set macvlan$i master bond0
    done
    ip netns del nst

Splat looks like:
[   40.585687][  T146] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP DEI
[   40.587249][  T146] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[   40.588342][  T146] CPU: 1 PID: 146 Comm: kworker/u8:2 Not tainted 5.7.0-rc1+ #532
[   40.589299][  T146] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   40.590469][  T146] Workqueue: netns cleanup_net
[   40.591045][  T146] RIP: 0010:macvlan_device_event+0x4e2/0x900 [macvlan]
[   40.591905][  T146] Code: 00 00 00 00 00 fc ff df 80 3c 06 00 0f 85 45 02 00 00 48 89 da 48 b8 00 00 00 00 00 fc ff d2
[   40.594126][  T146] RSP: 0018:ffff88806116f4a0 EFLAGS: 00010246
[   40.594783][  T146] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
[   40.595653][  T146] RDX: 0000000000000000 RSI: ffff88806547ddd8 RDI: ffff8880540f1360
[   40.596495][  T146] RBP: ffff88804011a808 R08: fffffbfff4fb8421 R09: fffffbfff4fb8421
[   40.597377][  T146] R10: ffffffffa7dc2107 R11: 0000000000000000 R12: 0000000000000008
[   40.598186][  T146] R13: ffff88804011a000 R14: ffff8880540f1000 R15: 1ffff1100c22de9a
[   40.599012][  T146] FS:  0000000000000000(0000) GS:ffff888067800000(0000) knlGS:0000000000000000
[   40.600004][  T146] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   40.600665][  T146] CR2: 00005572d3a807b8 CR3: 000000005fcf4003 CR4: 00000000000606e0
[   40.601485][  T146] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   40.602461][  T146] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   40.603443][  T146] Call Trace:
[   40.603871][  T146]  ? nf_tables_dump_setelem+0xa0/0xa0 [nf_tables]
[   40.604587][  T146]  ? macvlan_uninit+0x100/0x100 [macvlan]
[   40.605212][  T146]  ? __module_text_address+0x13/0x140
[   40.605842][  T146]  notifier_call_chain+0x90/0x160
[   40.606477][  T146]  dev_set_mac_address+0x28e/0x3f0
[   40.607117][  T146]  ? netdev_notify_peers+0xc0/0xc0
[   40.607762][  T146]  ? __module_text_address+0x13/0x140
[   40.608440][  T146]  ? notifier_call_chain+0x90/0x160
[   40.609097][  T146]  ? dev_set_mac_address+0x1f0/0x3f0
[   40.609758][  T146]  dev_set_mac_address+0x1f0/0x3f0
[   40.610402][  T146]  ? __local_bh_enable_ip+0xe9/0x1b0
[   40.611071][  T146]  ? bond_hw_addr_flush+0x77/0x100 [bonding]
[   40.611823][  T146]  ? netdev_notify_peers+0xc0/0xc0
[   40.612461][  T146]  ? bond_hw_addr_flush+0x77/0x100 [bonding]
[   40.613213][  T146]  ? bond_hw_addr_flush+0x77/0x100 [bonding]
[   40.613963][  T146]  ? __local_bh_enable_ip+0xe9/0x1b0
[   40.614631][  T146]  ? bond_time_in_interval.isra.31+0x90/0x90 [bonding]
[   40.615484][  T146]  ? __bond_release_one+0x9f0/0x12c0 [bonding]
[   40.616230][  T146]  __bond_release_one+0x9f0/0x12c0 [bonding]
[   40.616949][  T146]  ? bond_enslave+0x47c0/0x47c0 [bonding]
[   40.617642][  T146]  ? lock_downgrade+0x730/0x730
[   40.618218][  T146]  ? check_flags.part.42+0x450/0x450
[   40.618850][  T146]  ? __mutex_unlock_slowpath+0xd0/0x670
[   40.619519][  T146]  ? trace_hardirqs_on+0x30/0x180
[   40.620117][  T146]  ? wait_for_completion+0x250/0x250
[   40.620754][  T146]  bond_netdev_event+0x822/0x970 [bonding]
[   40.621460][  T146]  ? __module_text_address+0x13/0x140
[   40.622097][  T146]  notifier_call_chain+0x90/0x160
[   40.622806][  T146]  rollback_registered_many+0x660/0xcf0
[   40.623522][  T146]  ? netif_set_real_num_tx_queues+0x780/0x780
[   40.624290][  T146]  ? notifier_call_chain+0x90/0x160
[   40.624957][  T146]  ? netdev_upper_dev_unlink+0x114/0x180
[   40.625686][  T146]  ? __netdev_adjacent_dev_unlink_neighbour+0x30/0x30
[   40.626421][  T146]  ? mutex_is_locked+0x13/0x50
[   40.627016][  T146]  ? unregister_netdevice_queue+0xf2/0x240
[   40.627663][  T146]  unregister_netdevice_many.part.134+0x13/0x1b0
[   40.628362][  T146]  default_device_exit_batch+0x2d9/0x390
[   40.628987][  T146]  ? unregister_netdevice_many+0x40/0x40
[   40.629615][  T146]  ? dev_change_net_namespace+0xcb0/0xcb0
[   40.630279][  T146]  ? prepare_to_wait_exclusive+0x2e0/0x2e0
[   40.630943][  T146]  ? ops_exit_list.isra.9+0x97/0x140
[   40.631554][  T146]  cleanup_net+0x441/0x890
[ ... ]

Fixes: e289fd28176b ("macvlan: fix the problem when mac address changes for passthru mode")
Reported-by: syzbot+5035b1f9dc7ea4558d5a@syzkaller.appspotmail.com
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macsec: avoid to set wrong mtu

[ Upstream commit 7f327080364abccf923fa5a5b24e038eb0ba1407 ]

When a macsec interface is created, the mtu is calculated with the lower
interface's mtu value.
If the mtu of lower interface is lower than the length, which is needed
by macsec interface, macsec's mtu value will be overflowed.
So, if the lower interface's mtu is too low, macsec interface's mtu
should be set to 0.

Test commands:
    ip link add dummy0 mtu 10 type dummy
    ip link add macsec0 link dummy0 type macsec
    ip link show macsec0

Before:
    11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 4294967274
After:
    11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 0

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: fix restrict IPV6_ADDRFORM operation

[ Upstream commit 82c9ae440857840c56e05d4fb1427ee032531346 ]

Commit b6f6118901d1 ("ipv6: restrict IPV6_ADDRFORM operation") fixed a
problem found by syzbot an unfortunate logic error meant that it
also broke IPV6_ADDRFORM.

Rearrange the checks so that the earlier test is just one of the series
of checks made before moving the socket from IPv6 to IPv4.

Fixes: b6f6118901d1 ("ipv6: restrict IPV6_ADDRFORM operation")
Signed-off-by: John Haxby <john.haxby@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: Update fib_select_default to handle nexthop objects

[ Upstream commit 7c74b0bec918c1e0ca0b4208038c156eacf8f13f ]

A user reported [0] hitting the WARN_ON in fib_info_nh:

    [ 8633.839816] ------------[ cut here ]------------
    [ 8633.839819] WARNING: CPU: 0 PID: 1719 at include/net/nexthop.h:251 fib_select_path+0x303/0x381
    ...
    [ 8633.839846] RIP: 0010:fib_select_path+0x303/0x381
    ...
    [ 8633.839848] RSP: 0018:ffffb04d407f7d00 EFLAGS: 00010286
    [ 8633.839850] RAX: 0000000000000000 RBX: ffff9460b9897ee8 RCX: 00000000000000fe
    [ 8633.839851] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: 0000000000000000
    [ 8633.839852] RBP: ffff946076049850 R08: 0000000059263a83 R09: ffff9460840e4000
    [ 8633.839853] R10: 0000000000000014 R11: 0000000000000000 R12: ffffb04d407f7dc0
    [ 8633.839854] R13: ffffffffa4ce3240 R14: 0000000000000000 R15: ffff9460b7681f60
    [ 8633.839857] FS:  00007fcac2e02700(0000) GS:ffff9460bdc00000(0000) knlGS:0000000000000000
    [ 8633.839858] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    [ 8633.839859] CR2: 00007f27beb77e28 CR3: 0000000077734000 CR4: 00000000000006f0
    [ 8633.839867] Call Trace:
    [ 8633.839871]  ip_route_output_key_hash_rcu+0x421/0x890
    [ 8633.839873]  ip_route_output_key_hash+0x5e/0x80
    [ 8633.839876]  ip_route_output_flow+0x1a/0x50
    [ 8633.839878]  __ip4_datagram_connect+0x154/0x310
    [ 8633.839880]  ip4_datagram_connect+0x28/0x40
    [ 8633.839882]  __sys_connect+0xd6/0x100
    ...

The WARN_ON is triggered in fib_select_default which is invoked when
there are multiple default routes. Update the function to use
fib_info_nhc and convert the nexthop checks to use fib_nh_common.

Add test case that covers the affected code path.

[0] https://github.com/FRRouting/frr/issues/6089

Fixes: 493ced1ac47c ("ipv4: Allow routes to use nexthop objects")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxgb4: fix large delays in PTP synchronization

[ Upstream commit bd019427bf3623ee3c7d2845cf921bbf4c14846c ]

Fetching PTP sync information from mailbox is slow and can take
up to 10 milliseconds. Reduce this unnecessary delay by directly
reading the information from the corresponding registers.

Fixes: 9c33e4208bce ("cxgb4: Add PTP Hardware Clock (PHC) support")
Signed-off-by: Manoj Malviya <manojmalviya@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxgb4: fix adapter crash due to wrong MC size

[ Upstream commit ce222748078592afb51b810dc154531aeba4f512 ]

In the absence of MC1, the size calculation function
cudbg_mem_region_size() was returing wrong MC size and
resulted in adapter crash. This patch adds new argument
to cudbg_mem_region_size() which will have actual size
and returns error to caller in the absence of MC1.

Fixes: a1c69520f785 ("cxgb4: collect MC memory dump")
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>"
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/PM: Add missing link delays required by the PCIe spec

[ Upstream commit ad9001f2f41198784b0423646450ba2cb24793a3 ]

Currently Linux does not follow PCIe spec regarding the required delays
after reset. A concrete example is a Thunderbolt add-in-card that consists
of a PCIe switch and two PCIe endpoints:

  +-1b.0-[01-6b]----00.0-[02-6b]--+-00.0-[03]----00.0 TBT controller
                                  +-01.0-[04-36]-- DS hotplug port
                                  +-02.0-[37]----00.0 xHCI controller
                                  \-04.0-[38-6b]-- DS hotplug port

The root port (1b.0) and the PCIe switch downstream ports are all PCIe Gen3
so they support 8GT/s link speeds.

We wait for the PCIe hierarchy to enter D3cold (runtime):

  pcieport 0000:00:1b.0: power state changed by ACPI to D3cold

When it wakes up from D3cold, according to the PCIe 5.0 section 5.8 the
PCIe switch is put to reset and its power is re-applied. This means that we
must follow the rules in PCIe 5.0 section 6.6.1.

For the PCIe Gen3 ports we are dealing with here, the following applies:

  With a Downstream Port that supports Link speeds greater than 5.0 GT/s,
  software must wait a minimum of 100 ms after Link training completes
  before sending a Configuration Request to the device immediately below
  that Port. Software can determine when Link training completes by polling
  the Data Link Layer Link Active bit or by setting up an associated
  interrupt (see Section 6.7.3.3).

Translating this into the above topology we would need to do this (DLLLA
stands for Data Link Layer Link Active):

  0000:00:1b.0: wait for 100 ms after DLLLA is set before access to 0000:01:00.0
  0000:02:00.0: wait for 100 ms after DLLLA is set before access to 0000:03:00.0
  0000:02:02.0: wait for 100 ms after DLLLA is set before access to 0000:37:00.0

I've instrumented the kernel with some additional logging so we can see the
actual delays performed:

  pcieport 0000:00:1b.0: power state changed by ACPI to D0
  pcieport 0000:00:1b.0: waiting for D3cold delay of 100 ms
  pcieport 0000:00:1b.0: waiting for D3hot delay of 10 ms
  pcieport 0000:02:01.0: waiting for D3hot delay of 10 ms
  pcieport 0000:02:04.0: waiting for D3hot delay of 10 ms

For the switch upstream port (01:00.0 reachable through 00:1b.0 root port)
we wait for 100 ms but not taking into account the DLLLA requirement. We
then wait 10 ms for D3hot -> D0 transition of the root port and the two
downstream hotplug ports. This means that we deviate from what the spec
requires.

Performing the same check for system sleep (s2idle) transitions it turns
out to be even worse. None of the mandatory delays are performed. If this
would be S3 instead of s2idle then according to PCI FW spec 3.2 section
4.6.8. there is a specific _DSM that allows the OS to skip the delays but
this platform does not provide the _DSM and does not go to S3 anyway so no
firmware is involved that could already handle these delays.

On this particular platform these delays are not actually needed because
there is an additional delay as part of the ACPI power resource that is
used to turn on power to the hierarchy but since that additional delay is
not required by any of standards (PCIe, ACPI) it is not present in the
Intel Ice Lake, for example where missing the mandatory delays causes
pciehp to start tearing down the stack too early (links are not yet
trained). Below is an example how it looks like when this happens:

  pcieport 0000:83:04.0: pciehp: Slot(4): Card not present
  pcieport 0000:87:04.0: PME# disabled
  pcieport 0000:83:04.0: pciehp: pciehp_unconfigure_device: domain:bus:dev = 0000:86:00
  pcieport 0000:86:00.0: Refused to change power state, currently in D3
  pcieport 0000:86:00.0: restoring config space at offset 0x3c (was 0xffffffff, writing 0x201ff)
  pcieport 0000:86:00.0: restoring config space at offset 0x38 (was 0xffffffff, writing 0x0)
  ...

There is also one reported case (see the bugzilla link below) where the
missing delay causes xHCI on a Titan Ridge controller fail to runtime
resume when USB-C dock is plugged. This does not involve pciehp but instead
the PCI core fails to runtime resume the xHCI device:

  pcieport 0000:04:02.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
  pcieport 0000:04:02.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100406)
  xhci_hcd 0000:39:00.0: Refused to change power state, currently in D3
  xhci_hcd 0000:39:00.0: restoring config space at offset 0x3c (was 0xffffffff, writing 0x1ff)
  xhci_hcd 0000:39:00.0: restoring config space at offset 0x38 (was 0xffffffff, writing 0x0)
  ...

Add a new function pci_bridge_wait_for_secondary_bus() that is called on
PCI core resume and runtime resume paths accordingly if the bridge entered
D3cold (and thus went through reset).

This is second attempt to add the missing delays. The previous solution in
c2bf1fc212f7 ("PCI: Add missing link delays required by the PCIe spec") was
reverted because of two issues it caused:

  1. One system become unresponsive after S3 resume due to PME service
     spinning in pcie_pme_work_fn(). The root port in question reports that
     the xHCI sent PME but the xHCI device itself does not have PME status
     set. The PME status bit is never cleared in the root port resulting
     the indefinite loop in pcie_pme_work_fn().

  2. Slows down resume if the root/downstream port does not support Data
     Link Layer Active Reporting because pcie_wait_for_link_delay() waits
     1100 ms in that case.

This version should avoid the above issues because we restrict the delay to
happen only if the port went into D3cold.

Link: https://lore.kernel.org/linux-pci/SL2P216MB01878BBCD75F21D882AEEA2880C60@SL2P216MB0187.KORP216.PROD.OUTLOOK.COM/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203885
Link: https://lore.kernel.org/r/20191112091617.70282-3-mika.westerberg@linux.intel.com
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/ASPM: Allow re-enabling Clock PM

[ Upstream commit 35efea32b26f9aacc99bf07e0d2cdfba2028b099 ]

Previously Clock PM could not be re-enabled after being disabled by
pci_disable_link_state() because clkpm_capable was reset. Change this by
adding a clkpm_disable field similar to aspm_disable.

Link: https://lore.kernel.org/r/4e8a66db-7d53-4a66-c26c-f0037ffaa705@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: smartpqi: fix problem with unique ID for physical device

[ Upstream commit 5b083b305b49f65269b888885455b8c0cf1a52e4 ]

Obtain the unique IDs from the RLL and RPL instead of VPD page 83h.

Link: https://lore.kernel.org/r/157048751833.11757.11996314786914610803.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: smartpqi: fix call trace in device discovery

[ Upstream commit b969261134c1b990b96ea98fe5e0fcf8ec937c04 ]

Use sas_phy_delete rather than sas_phy_free which, according to
comments, should not be called for PHYs that have been set up
successfully.

Link: https://lore.kernel.org/r/157048748876.11757.17773443136670011786.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: smartpqi: fix controller lockup observed during force reboot

[ Upstream commit 0530736e40a0695b1ee2762e2684d00549699da4 ]

Link: https://lore.kernel.org/r/157048748297.11757.3872221216800537383.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio-blk: improve virtqueue error to BLK_STS

[ Upstream commit 3d973b2e9a625996ee997c7303cd793b9d197c65 ]

Let's change the mapping between virtqueue_add errors to BLK_STS
statuses, so that -ENOSPC, which indicates virtqueue full is still
mapped to BLK_STS_DEV_RESOURCE, but -ENOMEM which indicates non-device
specific resource outage is mapped to BLK_STS_RESOURCE.

Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20200213123728.61216-3-pasic@linux.ibm.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing/selftests: Turn off timeout setting

[ Upstream commit b43e78f65b1d35fd3e13c7b23f9b64ea83c9ad3a ]

As the ftrace selftests can run for a long period of time, disable the
timeout that the general selftests have. If a selftest hangs, then it
probably means the machine will hang too.

Link: https://lore.kernel.org/r/alpine.LSU.2.21.1911131604170.18679@pobox.suse.cz
Suggested-by: Miroslav Benes <mbenes@suse.cz>
Tested-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: trace: fix unconditional free in trace release

[ Upstream commit e6110114d18d330c05fd6de9f31283fd086a5a3a ]

Check if DMA pages were successfully allocated in initialization
before calling free. For many types of memory (like sgbufs)
the extra free is harmless, but not all backends track allocation
state, so add an explicit check.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200124213625.30186-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: pciehp: Prevent deadlock on disconnect

[ Upstream commit 87d0f2a5536fdf5053a6d341880f96135549a644 ]

This addresses deadlocks in these common cases in hierarchies containing
two switches:

  - All involved ports are runtime suspended and they are unplugged. This
    can happen easily if the drivers involved automatically enable runtime
    PM (xHCI for example does that).

  - System is suspended (e.g., closing the lid on a laptop) with a dock +
    something else connected, and the dock is unplugged while suspended.

These cases lead to the following deadlock:

  INFO: task irq/126-pciehp:198 blocked for more than 120 seconds.
  irq/126-pciehp  D    0   198      2 0x80000000
  Call Trace:
   schedule+0x2c/0x80
   schedule_timeout+0x246/0x350
   wait_for_completion+0xb7/0x140
   kthread_stop+0x49/0x110
   free_irq+0x32/0x70
   pcie_shutdown_notification+0x2f/0x50
   pciehp_remove+0x27/0x50
   pcie_port_remove_service+0x36/0x50
   device_release_driver+0x12/0x20
   bus_remove_device+0xec/0x160
   device_del+0x13b/0x350
   device_unregister+0x1a/0x60
   remove_iter+0x1e/0x30
   device_for_each_child+0x56/0x90
   pcie_port_device_remove+0x22/0x40
   pcie_portdrv_remove+0x20/0x60
   pci_device_remove+0x3e/0xc0
   device_release_driver_internal+0x18c/0x250
   device_release_driver+0x12/0x20
   pci_stop_bus_device+0x6f/0x90
   pci_stop_bus_device+0x31/0x90
   pci_stop_and_remove_bus_device+0x12/0x20
   pciehp_unconfigure_device+0x88/0x140
   pciehp_disable_slot+0x6a/0x110
   pciehp_handle_presence_or_link_change+0x263/0x400
   pciehp_ist+0x1c9/0x1d0
   irq_thread_fn+0x24/0x60
   irq_thread+0xeb/0x190
   kthread+0x120/0x140

  INFO: task irq/190-pciehp:2288 blocked for more than 120 seconds.
  irq/190-pciehp  D    0  2288      2 0x80000000
  Call Trace:
   __schedule+0x2a2/0x880
   schedule+0x2c/0x80
   schedule_preempt_disabled+0xe/0x10
   mutex_lock+0x2c/0x30
   pci_lock_rescan_remove+0x15/0x20
   pciehp_unconfigure_device+0x4d/0x140
   pciehp_disable_slot+0x6a/0x110
   pciehp_handle_presence_or_link_change+0x263/0x400
   pciehp_ist+0x1c9/0x1d0
   irq_thread_fn+0x24/0x60
   irq_thread+0xeb/0x190
   kthread+0x120/0x140

What happens here is that the whole hierarchy is runtime resumed and the
parent PCIe downstream port, which got the hot-remove event, starts
removing devices below it, taking pci_lock_rescan_remove() lock. When the
child PCIe port is runtime resumed it calls pciehp_check_presence() which
ends up calling pciehp_card_present() and pciehp_check_link_active().  Both
of these use pcie_capability_read_word(), which notices that the underlying
device is already gone and returns PCIBIOS_DEVICE_NOT_FOUND with the
capability value set to 0. When pciehp gets this value it thinks that its
child device is also hot-removed and schedules its IRQ thread to handle the
event.

The deadlock happens when the child's IRQ thread runs and tries to acquire
pci_lock_rescan_remove() which is already taken by the parent and the
parent waits for the child's IRQ thread to finish.

Prevent this from happening by checking the return value of
pcie_capability_read_word() and if it is PCIBIOS_DEVICE_NOT_FOUND stop
performing any hot-removal activities.

[bhelgaas: add common scenarios to commit log]
Link: https://lore.kernel.org/r/20191029170022.57528-2-mika.westerberg@linux.intel.com
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix readelf output parsing on powerpc with recent binutils

[ Upstream commit 3464afdf11f9a1e031e7858a05351ceca1792fea ]

On powerpc with recent versions of binutils, readelf outputs an extra
field when dumping the symbols of an object file. For example:

35: 0000000000000838 96 FUNC LOCAL DEFAULT [<localentry>: 8] 1 btf_is_struct

The extra "[<localentry>: 8]" prevents the GLOBAL_SYM_COUNT variable to
be computed correctly and causes the check_abi target to fail.

Fix that by looking for the symbol name in the last field instead of the
8th one. This way it should also cope with future extra fields.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/bpf/20191201195728.4161537-1-aurelien@aurel32.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/PM: Add pcie_wait_for_link_delay()

[ Upstream commit 4827d63891b6a839dac49c6ab62e61c4b011c4f2 ]

Add pcie_wait_for_link_delay(). Similar to pcie_wait_for_link() but allows
passing custom activation delay in milliseconds.

Link: https://lore.kernel.org/r/20191112091617.70282-2-mika.westerberg@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Not doing optimize bandwidth if flip pending.

[ Upstream commit 9941b8129030c9202aaf39114477a0e58c0d6ffc ]

[Why]
In some scenario like 1366x768 VSR enabled connected with a 4K monitor
and playing 4K video in clone mode, underflow will be observed due to
decrease dppclk when previouse surface scan isn't finished

[How]
In this use case, surface flip is switching between 4K and 1366x768,
1366x768 needs smaller dppclk, and when decrease the clk and previous
surface scan is for 4K and scan isn't done, underflow will happen. Not
doing optimize bandwidth in case of flip pending.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xhci: Finetune host initiated USB3 rootport link suspend and resume

[ Upstream commit ceca49382ac20e06ce04c21279c7f2868c4ec1d4 ]

Depending on the current link state the steps to resume the link to U0
varies. The normal case when a port is suspended (U3) we set the link
to U0 and wait for a port event when U3exit completed and port moved to
U0.

If the port is in U1/U2, then no event is issued, just set link to U0

If port is in Resume or Recovery state then the device has already
initiated resume, and this host initiated resume is racing against it.
Port event handler for device initiated resume will set link to U0,
just wait for the port to reach U0 before returning.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200312144517.1593-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xhci: Wait until link state trainsits to U0 after setting USB_SS_PORT_LS_U0

[ Upstream commit 0200b9f790b0fc9e9a42f685f5ad54b23fe959f4 ]

Like U3 case, xHCI spec doesn't specify the upper bound of U0 transition
time. The 20ms is not enough for some devices.

Intead of polling PLS or PLC, we can facilitate the port change event to
know that the link transits to U0 is completed.

While at it, also separate U0 and U3 case to make the code cleaner.

[variable rename to u3exit, and skip completion for usb2 ports -Mathias ]
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200312144517.1593-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xhci: Ensure link state is U3 after setting USB_SS_PORT_LS_U3

[ Upstream commit eb002726fac7cefb98ff39ddb89e150a1c24fe85 ]

The xHCI spec doesn't specify the upper bound of U3 transition time. For
some devices 20ms is not enough, so we need to make sure the link state
is in U3 before further actions.

I've tried to use U3 Entry Capability by setting U3 Entry Enable in
config register, however the port change event for U3 transition
interrupts the system suspend process.

For now let's use the less ideal method by polling PLS.

[use usleep_range(), and shorten the delay time while polling -Mathias]
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200312144517.1593-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Add Pioneer DJ DJM-250MK2 quirk

[ Upstream commit 73d8c94084341e2895169a0462dbc18167f01683 ]

Pioneer DJ DJM-250MK2 is a mixer that acts like a USB sound card.
The MIDI controller part is standard but the PCM part is "vendor specific".
Output is enabled by this quirk: 8 channels, 48 000 Hz, S24_3LE.
Input is not working.

Signed-off-by: František Kučera <franta-linux@frantovo.cz>
Link: https://lore.kernel.org/r/20200401095907.3387-1-konference@frantovo.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN MPWIN895CL tablet

[ Upstream commit c8b78f24c1247b7bd0882885c672d9dec5800bc6 ]

The MPMAN MPWIN895CL tablet almost fully works with out default settings.
The only problem is that it has only 1 speaker so any sounds only playing
on the right channel get lost.

Add a quirk for this model using the default settings + MONO_SPEAKER.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200405133726.24154-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Calculate scaling ratios on every medium/full update

[ Upstream commit 3bae20137cae6c03f58f96c0bc9f3d46f0bc17d4 ]

[Why]
If a plane isn't being actively enabled or disabled then DC won't
always recalculate scaling rects and ratios for the primary plane.

This results in only a partial or corrupted rect being displayed on
the screen instead of scaling to fit the screen.

[How]
Add back the logic to recalculate the scaling rects into
dc_commit_updates_for_stream since this is the expected place to
do it in DC.

This was previously removed a few years ago to fix an underscan issue
but underscan is still functional now with this change - and it should
be, since this is only updating to the latest plane state getting passed
in.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/core: Disable page faults when getting phys address

[ Upstream commit d3296fb372bf7497b0e5d0478c4e7a677ec6f6e9 ]

We hit following warning when running tests on kernel
compiled with CONFIG_DEBUG_ATOMIC_SLEEP=y:

WARNING: CPU: 19 PID: 4472 at mm/gup.c:2381 __get_user_pages_fast+0x1a4/0x200
CPU: 19 PID: 4472 Comm: dummy Not tainted 5.6.0-rc6+ #3
RIP: 0010:__get_user_pages_fast+0x1a4/0x200
...
Call Trace:
  perf_prepare_sample+0xff1/0x1d90
  perf_event_output_forward+0xe8/0x210
  __perf_event_overflow+0x11a/0x310
  __intel_pmu_pebs_event+0x657/0x850
  intel_pmu_drain_pebs_nhm+0x7de/0x11d0
  handle_pmi_common+0x1b2/0x650
  intel_pmu_handle_irq+0x17b/0x370
  perf_event_nmi_handler+0x40/0x60
  nmi_handle+0x192/0x590
  default_do_nmi+0x6d/0x150
  do_nmi+0x2f9/0x3c0
  nmi+0x8e/0xd7

While __get_user_pages_fast() is IRQ-safe, it calls access_ok(),
which warns on:

  WARN_ON_ONCE(!in_task() && !pagefault_disabled())

Peter suggested disabling page faults around __get_user_pages_fast(),
which gets rid of the warning in access_ok() call.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200407141427.3184722-1-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: bcm2835: Dynamically allocate base

[ Upstream commit 2c25b07e5ec119cab609e41407a1fb3fa61442f5 ]

The newer 2711 and 7211 chips have two PWM controllers and failure to
dynamically allocate the PWM base would prevent the second PWM
controller instance being probed for succeeding with an -EEXIST error
from alloc_pwms().

Fixes: e5a06dc5ac1f ("pwm: Add BCM2835 PWM driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: renesas-tpu: Fix late Runtime PM enablement

[ Upstream commit d5a3c7a4536e1329a758e14340efd0e65252bd3d ]

Runtime PM should be enabled before calling pwmchip_add(), as PWM users
can appear immediately after the PWM chip has been added.
Likewise, Runtime PM should always be disabled after the removal of the
PWM chip, even if the latter failed.

Fixes: 99b82abb0a35b073 ("pwm: Add Renesas TPU PWM driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: fix compat address handling in several ioctls

[ Upstream commit c95b708d5fa65b4e51f088ee077d127fd5a57b70 ]

On a 32-bit kernel, the upper bits of userspace addresses passed via
various ioctls are silently ignored by the nvme driver.

However on a 64-bit kernel running a compat task, these upper bits are
not ignored and are in fact required to be zero for the ioctls to work.

Unfortunately, this difference matters.  32-bit smartctl submits the
NVME_IOCTL_ADMIN_CMD ioctl with garbage in these upper bits because it
seems the pointer value it puts into the nvme_passthru_cmd structure is
sign extended.  This works fine on 32-bit kernels but fails on a 64-bit
one because (at least on my setup) the addresses smartctl uses are
consistently above 2G.  For example:

  # smartctl -x /dev/nvme0n1
  smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.5.11] (local build)
  Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

  Read NVMe Identify Controller failed: NVME_IOCTL_ADMIN_CMD: Bad address

Since changing 32-bit kernels to actually check all of the submitted
address bits now would break existing userspace, this patch fixes the
compat problem by explicitly zeroing the upper bits in the compat case.
This enables 32-bit smartctl to work on a 64-bit kernel.

Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries: Fix MCE handling on pseries

[ Upstream commit a95a0a1654f16366360399574e10efd87e867b39 ]

MCE handling on pSeries platform fails as recent rework to use common
code for pSeries and PowerNV in machine check error handling tries to
access per-cpu variables in realmode. The per-cpu variables may be
outside the RMO region on pSeries platform and needs translation to be
enabled for access. Just moving these per-cpu variable into RMO region
did'nt help because we queue some work to workqueues in real mode, which
again tries to touch per-cpu variables. Also fwnmi_release_errinfo()
cannot be called when translation is not enabled.

This patch fixes this by enabling translation in the exception handler
when all required real mode handling is done. This change only affects
the pSeries platform.

Without this fix below kernel crash is seen on injecting
SLB multihit:

BUG: Unable to handle kernel data access on read at 0xc00000027b205950
Faulting instruction address: 0xc00000000003b7e0
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: mcetest_slb(OE+) af_packet(E) xt_tcpudp(E) ip6t_rpfilter(E) ip6t_REJECT(E) ipt_REJECT(E) xt_conntrack(E) ip_set(E) nfnetlink(E) ebtable_nat(E) ebtable_broute(E) ip6table_nat(E) ip6table_mangle(E) ip6table_raw(E) ip6table_security(E) iptable_nat(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) iptable_mangle(E) iptable_raw(E) iptable_security(E) ebtable_filter(E) ebtables(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) ip_tables(E) x_tables(E) xfs(E) ibmveth(E) vmx_crypto(E) gf128mul(E) uio_pdrv_genirq(E) uio(E) crct10dif_vpmsum(E) rtc_generic(E) btrfs(E) libcrc32c(E) xor(E) zstd_decompress(E) zstd_compress(E) raid6_pq(E) sr_mod(E) sd_mod(E) cdrom(E) ibmvscsi(E) scsi_transport_srp(E) crc32c_vpmsum(E) dm_mod(E) sg(E) scsi_mod(E)
CPU: 34 PID: 8154 Comm: insmod Kdump: loaded Tainted: G OE 5.5.0-mahesh #1
NIP: c00000000003b7e0 LR: c0000000000f2218 CTR: 0000000000000000
REGS: c000000007dcb960 TRAP: 0300 Tainted: G OE (5.5.0-mahesh)
MSR: 8000000000001003 <SF,ME,RI,LE> CR: 28002428 XER: 20040000
CFAR: c0000000000f2214 DAR: c00000027b205950 DSISR: 40000000 IRQMASK: 0
GPR00: c0000000000f2218 c000000007dcbbf0 c000000001544800 c000000007dcbd70
GPR04: 0000000000000001 c000000007dcbc98 c008000000d00258 c0080000011c0000
GPR08: 0000000000000000 0000000300000003 c000000001035950 0000000003000048
GPR12: 000000027a1d0000 c000000007f9c000 0000000000000558 0000000000000000
GPR16: 0000000000000540 c008000001110000 c008000001110540 0000000000000000
GPR20: c00000000022af10 c00000025480fd70 c008000001280000 c00000004bfbb300
GPR24: c000000001442330 c00800000800000d c008000008000000 4009287a77000510
GPR28: 0000000000000000 0000000000000002 c000000001033d30 0000000000000001
NIP [c00000000003b7e0] save_mce_event+0x30/0x240
LR [c0000000000f2218] pseries_machine_check_realmode+0x2c8/0x4f0
Call Trace:
Instruction dump:
3c4c0151 38429050 7c0802a6 60000000 fbc1fff0 fbe1fff8 f821ffd1 3d42ffaf
3fc2ffaf e98d0030 394a1150 3bdef530 <7d6a62aa> 1d2b0048 2f8b0063 380b0001
---[ end trace 46fd63f36bbdd940 ]---

Fixes: 9ca766f9891d ("powerpc/64s/pseries: machine check convert to use common event code")
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200320110119.10207-1-ganeshgr@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled"

[ Upstream commit abc3fce76adbdfa8f87272c784b388cd20b46049 ]

This reverts commit ebb37cf3ffd39fdb6ec5b07111f8bb2f11d92c5f.

That commit does not play well with soft-masked irq state
manipulations in idle, interrupt replay, and possibly others due to
tracing code sometimes using irq_work_queue (e.g., in
trace_hardirqs_on()). That can cause PACA_IRQ_DEC to become set when
it is not expected, and be ignored or cleared or cause warnings.

The net result seems to be missing an irq_work until the next timer
interrupt in the worst case which is usually not going to be noticed,
however it could be a long time if the tick is disabled, which is
against the spirit of irq_work and might cause real problems.

The idea is still solid, but it would need more work. It's not really
clear if it would be worth added complexity, so revert this for
now (not a straight revert, but replace with a comment explaining why
we might see interrupts happening, and gives git blame something to
find).

Fixes: ebb37cf3ffd3 ("powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200402120401.1115883-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

loop: Better discard support for block devices

[ Upstream commit c52abf563049e787c1341cdf15c7dbe1bfbc951b ]

If the backing device for a loop device is itself a block device,
then mirror the "write zeroes" capabilities of the underlying
block device into the loop device. Copy this capability into both
max_write_zeroes_sectors and max_discard_sectors of the loop device.

The reason for this is that REQ_OP_DISCARD on a loop device translates
into blkdev_issue_zeroout(), rather than blkdev_issue_discard(). This
presents a consistent interface for loop devices (that discarded data
is zeroed), regardless of the backing device type of the loop device.
There should be no behavior change for loop devices backed by regular
files.

This change fixes blktest block/003, and removes an extraneous
error print in block/013 when testing on a loop device backed
by a block device that does not support discard.

Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
[used updated version of Evan's comment in loop_config_discard()]
[moved backingq to local scope, removed redundant braces]
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/cio: avoid duplicated 'ADD' uevents

[ Upstream commit 05ce3e53f375295c2940390b2b429e506e07655c ]

The common I/O layer delays the ADD uevent for subchannels and
delegates generating this uevent to the individual subchannel
drivers. The io_subchannel driver will do so when the associated
ccw_device has been registered -- but unconditionally, so more
ADD uevents will be generated if a subchannel has been unbound
from the io_subchannel driver and later rebound.

To fix this, only generate the ADD event if uevents were still
suppressed for the device.

Fixes: fa1a8c23eb7d ("s390: cio: Delay uevents for subchannels")
Message-Id: <20200327124503.9794-2-cohuck@redhat.com>
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/cio: generate delayed uevent for vfio-ccw subchannels

[ Upstream commit 2bc55eaeb88d30accfc1b6ac2708d4e4b81ca260 ]

The common I/O layer delays the ADD uevent for subchannels and
delegates generating this uevent to the individual subchannel
drivers. The vfio-ccw I/O subchannel driver, however, did not
do that, and will not generate an ADD uevent for subchannels
that had not been bound to a different driver (or none at all,
which also triggers the uevent).

Generate the ADD uevent at the end of the probe function if
uevents were still suppressed for the device.

Message-Id: <20200327124503.9794-3-cohuck@redhat.com>
Fixes: 63f1934d562d ("vfio: ccw: basic implementation for vfio_ccw driver")
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/raid6/test: fix build on distros whose /bin/sh is not bash

[ Upstream commit 06bd48b6cd97ef3889b68c8e09014d81dbc463f1 ]

You can build a user-space test program for the raid6 library code,
like this:

  $ cd lib/raid6/test
  $ make

The command in $(shell ...) function is evaluated by /bin/sh by default.
(or, you can specify the shell by passing SHELL=<shell> from command line)

Currently '>&/dev/null' is used to sink both stdout and stderr. Because
this code is bash-ism, it only works when /bin/sh is a symbolic link to
bash (this is the case on RHEL etc.)

This does not work on Ubuntu where /bin/sh is a symbolic link to dash.

I see lots of

  /bin/sh: 1: Syntax error: Bad fd number

and

  warning "your version of binutils lacks ... support"

Replace it with portable '>/dev/null 2>&1'.

Fixes: 4f8c55c5ad49 ("lib/raid6: build proper files on corresponding arch")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kconfig: qconf: Fix a few alignment issues

[ Upstream commit 60969f02f07ae1445730c7b293c421d179da729c ]

There are a few items with wrong alignments. Solve them.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipc/util.c: sysvipc_find_ipc() should increase position index

[ Upstream commit 89163f93c6f969da5811af5377cc10173583123b ]

If seq_file .next function does not change position index, read after
some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/b7a20945-e315-8bb0-21e6-3875c14a8494@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: kmod: fix handling test numbers above 9

[ Upstream commit 6d573a07528308eb77ec072c010819c359bebf6e ]

get_test_count() and get_test_enabled() were broken for test numbers
above 9 due to awk interpreting a field specification like '$0010' as
octal rather than decimal. Fix it by stripping the leading zeroes.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200318230515.171692-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kernel/gcov/fs.c: gcov_seq_next() should increase position index

[ Upstream commit f4d74ef6220c1eda0875da30457bef5c7111ab06 ]

If seq_file .next function does not change position index, read after
some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Waiman Long <longman@redhat.com>
Link: http://lkml.kernel.org/r/f65c6ee7-bd00-f910-2f8a-37cc67e4ff88@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-direct: fix data truncation in dma_direct_get_required_mask()

[ Upstream commit cdcda0d1f8f4ab84efe7cd9921c98364398aefd7 ]

The upper 32-bit physical address gets truncated inadvertently
when dma_direct_get_required_mask() invokes phys_to_dma_direct().
This results in dma_addressing_limited() return incorrect value
when used in platforms with LPAE enabled.
Fix it here by explicitly type casting 'max_pfn' to phys_addr_t
in order to prevent overflow of intermediate value while evaluating
'(max_pfn - 1) << PAGE_SHIFT'.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Update stream adjust in dc_stream_adjust_vmin_vmax

[ Upstream commit 346d8a0a3c91888a412c2735d69daa09c00f0203 ]

[Why]
After v_total_min and max are updated in vrr structure, the changes are
not reflected in stream adjust. When these values are read from stream
adjust it does not reflect the actual state of the system.

[How]
Set stream adjust values equal to vrr adjust values after vrr adjust
values are updated.

Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: fix deadlock caused by ANA update wrong locking

[ Upstream commit 657f1975e9d9c880fa13030e88ba6cc84964f1db ]

The deadlock combines 4 flows in parallel:
- ns scanning (triggered from reconnect)
- request timeout
- ANA update (triggered from reconnect)
- I/O coming into the mpath device

(1) ns scanning triggers disk revalidation -> update disk info ->
    freeze queue -> but blocked, due to (2)

(2) timeout handler reference the g_usage_counter - > but blocks in
    the transport .timeout() handler, due to (3)

(3) the transport timeout handler (indirectly) calls nvme_stop_queue() ->
    which takes the (down_read) namespaces_rwsem - > but blocks, due to (4)

(4) ANA update takes the (down_write) namespaces_rwsem -> calls
    nvme_mpath_set_live() -> which synchronize the ns_head srcu
    (see commit 504db087aacc) -> but blocks, due to (5)

(5) I/O came into nvme_mpath_make_request -> took srcu_read_lock ->
    direct_make_request > blk_queue_enter -> but blocked, due to (1)

==> the request queue is under freeze -> deadlock.

The fix is making ANA update take a read lock as the namespaces list
is not manipulated, it is just the ns and ns->head that are being
updated (which is protected with the ns->head lock).

Fixes: 0d0b660f214dc ("nvme: add ANA support")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: atom: Take the drv->lock mutex before calling sst_send_slot_map()

[ Upstream commit 81630dc042af998b9f58cd8e2c29dab9777ea176 ]

sst_send_slot_map() uses sst_fill_and_send_cmd_unlocked() because in some
places it is called with the drv->lock mutex already held.

So it must always be called with the mutex locked. This commit adds missing
locking in the sst_set_be_modules() code-path.

Fixes: 24c8d14192cc ("ASoC: Intel: mrfld: add DSP core controls")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200402185359.3424-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/test/nvdimm: Fix out of tree build

[ Upstream commit 1f776799628139d0da47e710ad86eb58d987ff66 ]

Out of tree build using

   make M=tools/test/nvdimm O=/tmp/build -C /tmp/build

fails with the following error

make: Entering directory '/tmp/build'
  CC [M]  tools/testing/nvdimm/test/nfit.o
linux/tools/testing/nvdimm/test/nfit.c:19:10: fatal error: nd-core.h: No such file or directory
   19 | #include <nd-core.h>
      |          ^~~~~~~~~~~
compilation terminated.

That is because the kbuild file uses $(src) which points to
tools/testing/nvdimm, $(srctree) correctly points to root of the linux
source tree.

Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Link: https://lore.kernel.org/r/20200114054051.4115790-1-santosh@fossix.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Report unbind session event when the target has been removed

[ Upstream commit 13e60d3ba287d96eeaf1deaadba51f71578119a3 ]

If the daemon is restarted or crashes while logging out of a session, the
unbind session event sent by the kernel is not processed and is lost. When
the daemon starts again, the session can't be unbound because the daemon is
waiting for the event message. However, the kernel has already logged out
and the event will not be resent.

When iscsid restart is complete, logout session reports error:

Logging out of session [sid: 6, target: iqn.xxxxx, portal: xx.xx.xx.xx,3260]
iscsiadm: Could not logout of [sid: 6, target: iscsiadm -m node iqn.xxxxx, portal: xx.xx.xx.xx,3260].
iscsiadm: initiator reported error (9 - internal error)
iscsiadm: Could not logout of all requested sessions

Make sure the unbind event is emitted.

[mkp: commit desc and applied by hand since patch was mangled]

Link: https://lore.kernel.org/r/4eab1771-2cb3-8e79-b31c-923652340e99@huawei.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-tcp: fix possible crash in write_zeroes processing

[ Upstream commit 25e5cb780e62bde432b401f312bb847edc78b432 ]

We cannot look at blk_rq_payload_bytes without first checking
that the request has a mappable physical segments first (e.g.
blk_rq_nr_phys_segments(rq) != 0) and only then to take the
request payload bytes. This caused us to send a wrong sgl to
the target or even dereference a non-existing buffer in case
we actually got to the data send sequence (if it was in-capsule).

Reported-by: Tony Asleson <tasleson@redhat.com>
Suggested-by: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: rcar: Fix late Runtime PM enablement

[ Upstream commit 1451a3eed24b5fd6a604683f0b6995e0e7e16c79 ]

Runtime PM should be enabled before calling pwmchip_add(), as PWM users
can appear immediately after the PWM chip has been added.
Likewise, Runtime PM should be disabled after the removal of the PWM
chip.

Fixes: ed6c1476bf7f16d5 ("pwm: Add support for R-Car PWM Timer")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: don't skip updating wanted caps when cap is stale

[ Upstream commit 0aa971b6fd3f92afef6afe24ef78d9bb14471519 ]

1. try_get_cap_refs() fails to get caps and finds that mds_wanted
   does not include what it wants. It returns -ESTALE.
2. ceph_get_caps() calls ceph_renew_caps(). ceph_renew_caps() finds
   that inode has cap, so it calls ceph_check_caps().
3. ceph_check_caps() finds that issued caps (without checking if it's
   stale) already includes caps wanted by open file, so it skips
   updating wanted caps.

Above events can cause an infinite loop inside ceph_get_caps().

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: return ceph_mdsc_do_request() errors from __get_parent()

[ Upstream commit c6d50296032f0b97473eb2e274dc7cc5d0173847 ]

Return the error returned by ceph_mdsc_do_request(). Otherwise,
r_target_inode ends up being NULL this ends up returning ENOENT
regardless of the error.

Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: libfc: If PRLI rejected, move rport to PLOGI state

[ Upstream commit 45e544bfdab2014d11c7595b8ccc3c4715a09015 ]

If PRLI reject code indicates "rejected status", move rport state machine
back to PLOGI state.

Link: https://lore.kernel.org/r/20200327060208.17104-2-skashyap@marvell.com
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix crash in target side cable pulls hitting WAIT_FOR_UNREG

[ Upstream commit 807e7353d8a7105ce884d22b0dbc034993c6679c ]

Kernel is crashing with the following stacktrace:

  BUG: unable to handle kernel NULL pointer dereference at
    00000000000005bc
  IP: lpfc_nvme_register_port+0x1a8/0x3a0 [lpfc]
  ...
  Call Trace:
  lpfc_nlp_state_cleanup+0x2b2/0x500 [lpfc]
  lpfc_nlp_set_state+0xd7/0x1a0 [lpfc]
  lpfc_cmpl_prli_prli_issue+0x1f7/0x450 [lpfc]
  lpfc_disc_state_machine+0x7a/0x1e0 [lpfc]
  lpfc_cmpl_els_prli+0x16f/0x1e0 [lpfc]
  lpfc_sli_sp_handle_rspiocb+0x5b2/0x690 [lpfc]
  lpfc_sli_handle_slow_ring_event_s4+0x182/0x230 [lpfc]
  lpfc_do_work+0x87f/0x1570 [lpfc]
  kthread+0x10d/0x130
  ret_from_fork+0x35/0x40

During target side fault injections, it is possible to hit the
NLP_WAIT_FOR_UNREG case in lpfc_nvme_remoteport_delete. A prior commit
fixed a rebind and delete race condition, but called lpfc_nlp_put
unconditionally. This triggered a deletion and the crash.

Fix by movng nlp_put to inside the NLP_WAIT_FOR_UNREG case, where the nlp
will be being unregistered/removed. Leave the reference if the flag isn't
set.

Link: https://lore.kernel.org/r/20200322181304.37655-8-jsmart2021@gmail.com
Fixes: b15bd3e6212e ("scsi: lpfc: Fix nvme remoteport registration race conditions")
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix crash after handling a pci error

[ Upstream commit 4cd70891308dfb875ef31060c4a4aa8872630a2e ]

Injecting EEH on a 32GB card is causing kernel oops

The pci error handler is doing an IO flush and the offline code is also
doing an IO flush. When the 1st flush is complete the hdwq is destroyed
(freed), yet the second flush accesses the hdwq and crashes.

Added a check in lpfc_sli4_fush_io_rings to check both the HBA_IOQ_FLUSH
flag and the hdwq pointer to see if it is already set and not already
freed.

Link: https://lore.kernel.org/r/20200322181304.37655-6-jsmart2021@gmail.com
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix kasan slab-out-of-bounds error in lpfc_unreg_login

[ Upstream commit 38503943c89f0bafd9e3742f63f872301d44cbea ]

The following kasan bug was called out:

BUG: KASAN: slab-out-of-bounds in lpfc_unreg_login+0x7c/0xc0 [lpfc]
Read of size 2 at addr ffff889fc7c50a22 by task lpfc_worker_3/6676
...
Call Trace:
dump_stack+0x96/0xe0
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
print_address_description.constprop.6+0x1b/0x220
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
__kasan_report.cold.9+0x37/0x7c
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
kasan_report+0xe/0x20
lpfc_unreg_login+0x7c/0xc0 [lpfc]
lpfc_sli_def_mbox_cmpl+0x334/0x430 [lpfc]
...

When processing the completion of a "Reg Rpi" login mailbox command in
lpfc_sli_def_mbox_cmpl, a call may be made to lpfc_unreg_login. The vpi is
extracted from the completing mailbox context and passed as an input for
the next. However, the vpi stored in the mailbox command context is an
absolute vpi, which for SLI4 represents both base + offset. When used with
a non-zero base component, (function id > 0) this results in an
out-of-range access beyond the allocated phba->vpi_ids array.

Fix by subtracting the function's base value to get an accurate vpi number.

Link: https://lore.kernel.org/r/20200322181304.37655-2-jsmart2021@gmail.com
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: reset last_hw_keepalive time at start

[ Upstream commit 982bb70517aef2225bad1d802887b733db492cc0 ]

Currently the watchdog core does not initialize the last_hw_keepalive
time during watchdog startup. This will cause the watchdog to be pinged
immediately if enough time has passed from the system boot-up time, and
some types of watchdogs like K3 RTI does not like this.

To avoid the issue, setup the last_hw_keepalive time during watchdog
startup.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200302200426.6492-3-t-kristo@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/testing/nvdimm: Fix compilation failure without CONFIG_DEV_DAX_PMEM_COMPAT

[ Upstream commit c0e71d602053e4e7637e4bc7d0bc9603ea77a33f ]

When a kernel is configured without CONFIG_DEV_DAX_PMEM_COMPAT, the
compilation of tools/testing/nvdimm fails with:

Building modules, stage 2.
MODPOST 11 modules
ERROR: "dax_pmem_compat_test" [tools/testing/nvdimm/test/nfit_test.ko] undefined!

Fix the problem by calling dax_pmem_compat_test() only if the kernel has
the required functionality.

Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200123154720.12097-1-jack@suse.cz
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: Silence clang warning on mismatched value/register sizes

[ Upstream commit: 27a22fbdeedd6c5c451cf5f830d51782bf50c3a2 ]

Clang reports a warning on the __tlbi(aside1is, 0) macro expansion since
the value size does not match the register size specified in the inline
asm. Construct the ASID value using the __TLBI_VADDR() macro.

Fixes: 222fc0c8503d ("arm64: compat: Workaround Neoverse-N1 #1542419 for compat user-space")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: compat: Workaround Neoverse-N1 #1542419 for compat user-space

[ Upstream commit 222fc0c8503d98cec3cb2bac2780cdd21a6e31c0 ]

Compat user-space is unable to perform ICIMVAU instructions from
user-space. Instead it uses a compat-syscall. Add the workaround for
Neoverse-N1 #1542419 to this code path.

Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: Fake the IminLine size on systems affected by Neoverse-N1 #1542419

[ Upstream commit ee9d90be9ddace01b7fb126567e4b539fbe1f82f ]

Systems affected by Neoverse-N1 #1542419 support DIC so do not need to
perform icache maintenance once new instructions are cleaned to the PoU.
For the errata workaround, the kernel hides DIC from user-space, so that
the unnecessary cache maintenance can be trapped by firmware.

To reduce the number of traps, produce a fake IminLine value based on
PAGE_SIZE.

Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: errata: Hide CTR_EL0.DIC on systems affected by Neoverse-N1 #1542419

[ Upstream commit 05460849c3b51180d5ada3373d0449aea19075e4 ]

Cores affected by Neoverse-N1 #1542419 could execute a stale instruction
when a branch is updated to point to freshly generated instructions.

To workaround this issue we need user-space to issue unnecessary
icache maintenance that we can trap. Start by hiding CTR_EL0.DIC.

Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net, ip_tunnel: fix interface lookup with no key

commit 25629fdaff2ff509dd0b3f5ff93d70a75e79e0a1 upstream.

when creating a new ipip interface with no local/remote configuration,
the lookup is done with TUNNEL_NO_KEY flag, making it impossible to
match the new interface (only possible match being fallback or metada
case interface); e.g: `ip link add tunl1 type ipip dev eth0`

To fix this case, adding a flag check before the key comparison so we
permit to match an interface with no local/remote config; it also avoids
breaking possible userland tools relying on TUNNEL_NO_KEY flag and
uninitialised key.

context being on my side, I'm creating an extra ipip interface attached
to the physical one, and moving it to a dedicated namespace.

Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to avoid memory leakage in f2fs_listxattr

commit 688078e7f36c293dae25b338ddc9e0a2790f6e06 upstream.

In f2fs_listxattr, there is no boundary check before
memcpy e_name to buffer.
If the e_name_len is corrupted,
unexpected memory contents may be returned to the buffer.

Signed-off-by: Randall Huang <huangrandall@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix extent_status fragmentation for plain files

[ Upstream commit 4068664e3cd2312610ceac05b74c4cf1853b8325 ]

Extents are cached in read_extent_tree_block(); as a result, extents
are not cached for inodes with depth == 0 when we try to find the
extent using ext4_find_extent().  The result of the lookup is cached
in ext4_map_blocks() but is only a subset of the extent on disk.  As a
result, the contents of extents status cache can get very badly
fragmented for certain workloads, such as a random 4k read workload.

File size of /mnt/test is 33554432 (8192 blocks of 4096 bytes)
ext:     logical_offset:        physical_offset: length:   expected: flags:
   0:        0..    8191:      40960..     49151:   8192:             last,eof

$ perf record -e 'ext4:ext4_es_*' /root/bin/fio --name=t --direct=0 --rw=randread --bs=4k --filesize=32M --size=32M --filename=/mnt/test
$ perf script | grep ext4_es_insert_extent | head -n 10
             fio   131 [000]    13.975421:           ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [494/1) mapped 41454 status W
             fio   131 [000]    13.975939:           ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6064/1) mapped 47024 status W
             fio   131 [000]    13.976467:           ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6907/1) mapped 47867 status W
             fio   131 [000]    13.976937:           ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3850/1) mapped 44810 status W
             fio   131 [000]    13.977440:           ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3292/1) mapped 44252 status W
             fio   131 [000]    13.977931:           ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6882/1) mapped 47842 status W
             fio   131 [000]    13.978376:           ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3117/1) mapped 44077 status W
             fio   131 [000]    13.978957:           ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [2896/1) mapped 43856 status W
             fio   131 [000]    13.979474:           ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [7479/1) mapped 48439 status W

Fix this by caching the extents for inodes with depth == 0 in
ext4_find_extent().

[ Renamed ext4_es_cache_extents() to ext4_cache_extents() since this
  newly added function is not in extents_cache.c, and to avoid
  potential visual confusion with ext4_es_cache_extent().  -TYT ]

Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com>
Link: https://lore.kernel.org/r/20191106122502.19986-1-dmonakhov@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.4.35

bpf, test_verifier: switch bpf_get_stack's 0 s> r8 test

[ no upstream commit ]

Switch the comparison, so that is_branch_taken() will recognize that below
branch is never taken:

  [...]
  17: [...] R1_w=inv0 [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...]
  17: (67) r8 <<= 32
  18: [...] R8_w=inv(id=0,smax_value=-4294967296,umin_value=9223372036854775808,umax_value=18446744069414584320,var_off=(0x8000000000000000; 0x7fffffff00000000)) [...]
  18: (c7) r8 s>>= 32
  19: [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...]
  19: (6d) if r1 s> r8 goto pc+16
  [...] R1_w=inv0 [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...]
  [...]

Currently we check for is_branch_taken() only if either K is source, or source
is a scalar value that is const. For upstream it would be good to extend this
properly to check whether dst is const and src not.

For the sake of the test_verifier, it is probably not needed here:

  # ./test_verifier 101
  #101/p bpf_get_stack return R0 within range OK
  Summary: 1 PASSED, 0 SKIPPED, 0 FAILED

I haven't seen this issue in test_progs* though, they are passing fine:

  # ./test_progs-no_alu32 -t get_stack
  Switching to flavor 'no_alu32' subdirectory...
  #20 get_stack_raw_tp:OK
  Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED

  # ./test_progs -t get_stack
  #20 get_stack_raw_tp:OK
  Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Test_progs, add test to catch retval refine error handling

commit d2db08c7a14e0b5eed6132baf258b80622e041a9 upstream.

Before this series the verifier would clamp return bounds of
bpf_get_stack() to [0, X] and this led the verifier to believe
that a JMP_JSLT 0 would be false and so would prune that path.

The result is anything hidden behind that JSLT would be unverified.
Add a test to catch this case by hiding an goto pc-1 behind the
check which will cause an infinite loop if not rejected.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158560423908.10843.11783152347709008373.stgit@john-Precision-5820-Tower
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Test_verifier, bpf_get_stack return value add <0

commit 9ac26e9973bac5716a2a542e32f380c84db2b88c upstream.

With current ALU32 subreg handling and retval refine fix from last
patches we see an expected failure in test_verifier. With verbose
verifier state being printed at each step for clarity we have the
following relavent lines [I omit register states that are not
necessarily useful to see failure cause],

#101/p bpf_get_stack return R0 within range FAIL
Failed to load prog 'Success'!
[..]
14: (85) call bpf_get_stack#67
R0_w=map_value(id=0,off=0,ks=8,vs=48,imm=0)
R3_w=inv48
15:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
15: (b7) r1 = 0
16:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
16: (bf) r8 = r0
17:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
17: (67) r8 <<= 32
18:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smax_value=9223372032559808512,
               umax_value=18446744069414584320,
               var_off=(0x0; 0xffffffff00000000),
               s32_min_value=0,
               s32_max_value=0,
               u32_max_value=0,
               var32_off=(0x0; 0x0))
18: (c7) r8 s>>= 32
19
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smin_value=-2147483648,
               smax_value=2147483647,
               var32_off=(0x0; 0xffffffff))
19: (cd) if r1 s< r8 goto pc+16
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smin_value=-2147483648,
               smax_value=0,
               var32_off=(0x0; 0xffffffff))
20:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smin_value=-2147483648,
               smax_value=0,
R9=inv48
20: (1f) r9 -= r8
21: (bf) r2 = r7
22:
R2_w=map_value(id=0,off=0,ks=8,vs=48,imm=0)
22: (0f) r2 += r8
value -2147483648 makes map_value pointer be out of bounds

After call bpf_get_stack() on line 14 and some moves we have at line 16
an r8 bound with max_value 48 but an unknown min value. This is to be
expected bpf_get_stack call can only return a max of the input size but
is free to return any negative error in the 32-bit register space. The
C helper is returning an int so will use lower 32-bits.

Lines 17 and 18 clear the top 32 bits with a left/right shift but use
ARSH so we still have worst case min bound before line 19 of -2147483648.
At this point the signed check 'r1 s< r8' meant to protect the addition
on line 22 where dst reg is a map_value pointer may very well return
true with a large negative number. Then the final line 22 will detect
this as an invalid operation and fail the program. What we want to do
is proceed only if r8 is positive non-error. So change 'r1 s< r8' to
'r1 s> r8' so that we jump if r8 is negative.

Next we will throw an error because we access past the end of the map
value. The map value size is 48 and sizeof(struct test_val) is 48 so
we walk off the end of the map value on the second call to
get bpf_get_stack(). Fix this by changing sizeof(struct test_val) to
24 by using 'sizeof(struct test_val) / 2'. After this everything passes
as expected.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/158560426019.10843.3285429543232025187.stgit@john-Precision-5820-Tower
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: fix buggy r0 retval refinement for tracing helpers

[ no upstream commit ]

See the glory details in 100605035e15 ("bpf: Verifier, do_refine_retval_range
may clamp umin to 0 incorrectly") for why 849fa50662fb ("bpf/verifier: refine
retval R0 state for bpf_get_stack helper") is buggy. The whole series however
is not suitable for stable since it adds significant amount [0] of verifier
complexity in order to add 32bit subreg tracking. Something simpler is needed.

Unfortunately, reverting 849fa50662fb ("bpf/verifier: refine retval R0 state
for bpf_get_stack helper") or just cherry-picking 100605035e15 ("bpf: Verifier,
do_refine_retval_range may clamp umin to 0 incorrectly") is not an option since
it will break existing tracing programs badly (at least those that are using
bpf_get_stack() and bpf_probe_read_str() helpers). Not fixing it in stable is
also not an option since on 4.19 kernels an error will cause a soft-lockup due
to hitting dead-code sanitized branch since we don't hard-wire such branches
in old kernels yet. But even then for 5.x 849fa50662fb ("bpf/verifier: refine
retval R0 state for bpf_get_stack helper") would cause wrong bounds on the
verifier simluation when an error is hit.

In one of the earlier iterations of mentioned patch series for upstream there
was the concern that just using smax_value in do_refine_retval_range() would
nuke bounds by subsequent <<32 >>32 shifts before the comparison against 0 [1]
which eventually led to the 32bit subreg tracking in the first place. While I
initially went for implementing the idea [1] to pattern match the two shift
operations, it turned out to be more complex than actually needed, meaning, we
could simply treat do_refine_retval_range() similarly to how we branch off
verification for conditionals or under speculation, that is, pushing a new
reg state to the stack for later verification. This means, instead of verifying
the current path with the ret_reg in [S32MIN, msize_max_value] interval where
later bounds would get nuked, we split this into two: i) for the success case
where ret_reg can be in [0, msize_max_value], and ii) for the error case with
ret_reg known to be in interval [S32MIN, -1]. Latter will preserve the bounds
during these shift patterns and can match reg < 0 test. test_progs also succeed
with this approach.

[0] https://lore.kernel.org/bpf/158507130343.15666.8018068546764556975.stgit@john-Precision-5820-Tower/
[1] https://lore.kernel.org/bpf/158015334199.28573.4940395881683556537.stgit@john-XPS-13-9370/T/#m2e0ad1d5949131014748b6daa48a3495e7f0456d

Fixes: 849fa50662fb ("bpf/verifier: refine retval R0 state for bpf_get_stack helper")
Reported-by: Lorenzo Fontana <fontanalorenz@gmail.com>
Reported-by: Leonardo Di Donato <leodidonato@gmail.com>
Reported-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: Don't write out to userspace while holding key semaphore

commit d3ec10aa95819bff18a0d936b18884c7816d0914 upstream.

A lockdep circular locking dependency report was seen when running a
keyutils test:

[12537.027242] ======================================================
[12537.059309] WARNING: possible circular locking dependency detected
[12537.088148] 4.18.0-147.7.1.el8_1.x86_64+debug #1 Tainted: G OE    --------- -  -
[12537.125253] ------------------------------------------------------
[12537.153189] keyctl/25598 is trying to acquire lock:
[12537.175087] 000000007c39f96c (&mm->mmap_sem){++++}, at: __might_fault+0xc4/0x1b0
[12537.208365]
[12537.208365] but task is already holding lock:
[12537.234507] 000000003de5b58d (&type->lock_class){++++}, at: keyctl_read_key+0x15a/0x220
[12537.270476]
[12537.270476] which lock already depends on the new lock.
[12537.270476]
[12537.307209]
[12537.307209] the existing dependency chain (in reverse order) is:
[12537.340754]
[12537.340754] -> #3 (&type->lock_class){++++}:
[12537.367434]        down_write+0x4d/0x110
[12537.385202]        __key_link_begin+0x87/0x280
[12537.405232]        request_key_and_link+0x483/0xf70
[12537.427221]        request_key+0x3c/0x80
[12537.444839]        dns_query+0x1db/0x5a5 [dns_resolver]
[12537.468445]        dns_resolve_server_name_to_ip+0x1e1/0x4d0 [cifs]
[12537.496731]        cifs_reconnect+0xe04/0x2500 [cifs]
[12537.519418]        cifs_readv_from_socket+0x461/0x690 [cifs]
[12537.546263]        cifs_read_from_socket+0xa0/0xe0 [cifs]
[12537.573551]        cifs_demultiplex_thread+0x311/0x2db0 [cifs]
[12537.601045]        kthread+0x30c/0x3d0
[12537.617906]        ret_from_fork+0x3a/0x50
[12537.636225]
[12537.636225] -> #2 (root_key_user.cons_lock){+.+.}:
[12537.664525]        __mutex_lock+0x105/0x11f0
[12537.683734]        request_key_and_link+0x35a/0xf70
[12537.705640]        request_key+0x3c/0x80
[12537.723304]        dns_query+0x1db/0x5a5 [dns_resolver]
[12537.746773]        dns_resolve_server_name_to_ip+0x1e1/0x4d0 [cifs]
[12537.775607]        cifs_reconnect+0xe04/0x2500 [cifs]
[12537.798322]        cifs_readv_from_socket+0x461/0x690 [cifs]
[12537.823369]        cifs_read_from_socket+0xa0/0xe0 [cifs]
[12537.847262]        cifs_demultiplex_thread+0x311/0x2db0 [cifs]
[12537.873477]        kthread+0x30c/0x3d0
[12537.890281]        ret_from_fork+0x3a/0x50
[12537.908649]
[12537.908649] -> #1 (&tcp_ses->srv_mutex){+.+.}:
[12537.935225]        __mutex_lock+0x105/0x11f0
[12537.954450]        cifs_call_async+0x102/0x7f0 [cifs]
[12537.977250]        smb2_async_readv+0x6c3/0xc90 [cifs]
[12538.000659]        cifs_readpages+0x120a/0x1e50 [cifs]
[12538.023920]        read_pages+0xf5/0x560
[12538.041583]        __do_page_cache_readahead+0x41d/0x4b0
[12538.067047]        ondemand_readahead+0x44c/0xc10
[12538.092069]        filemap_fault+0xec1/0x1830
[12538.111637]        __do_fault+0x82/0x260
[12538.129216]        do_fault+0x419/0xfb0
[12538.146390]        __handle_mm_fault+0x862/0xdf0
[12538.167408]        handle_mm_fault+0x154/0x550
[12538.187401]        __do_page_fault+0x42f/0xa60
[12538.207395]        do_page_fault+0x38/0x5e0
[12538.225777]        page_fault+0x1e/0x30
[12538.243010]
[12538.243010] -> #0 (&mm->mmap_sem){++++}:
[12538.267875]        lock_acquire+0x14c/0x420
[12538.286848]        __might_fault+0x119/0x1b0
[12538.306006]        keyring_read_iterator+0x7e/0x170
[12538.327936]        assoc_array_subtree_iterate+0x97/0x280
[12538.352154]        keyring_read+0xe9/0x110
[12538.370558]        keyctl_read_key+0x1b9/0x220
[12538.391470]        do_syscall_64+0xa5/0x4b0
[12538.410511]        entry_SYSCALL_64_after_hwframe+0x6a/0xdf
[12538.435535]
[12538.435535] other info that might help us debug this:
[12538.435535]
[12538.472829] Chain exists of:
[12538.472829]   &mm->mmap_sem --> root_key_user.cons_lock --> &type->lock_class
[12538.472829]
[12538.524820]  Possible unsafe locking scenario:
[12538.524820]
[12538.551431]        CPU0                    CPU1
[12538.572654]        ----                    ----
[12538.595865]   lock(&type->lock_class);
[12538.613737]                                lock(root_key_user.cons_lock);
[12538.644234]                                lock(&type->lock_class);
[12538.672410]   lock(&mm->mmap_sem);
[12538.687758]
[12538.687758]  *** DEADLOCK ***
[12538.687758]
[12538.714455] 1 lock held by keyctl/25598:
[12538.732097]  #0: 000000003de5b58d (&type->lock_class){++++}, at: keyctl_read_key+0x15a/0x220
[12538.770573]
[12538.770573] stack backtrace:
[12538.790136] CPU: 2 PID: 25598 Comm: keyctl Kdump: loaded Tainted: G
[12538.844855] Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 12/27/2015
[12538.881963] Call Trace:
[12538.892897]  dump_stack+0x9a/0xf0
[12538.907908]  print_circular_bug.isra.25.cold.50+0x1bc/0x279
[12538.932891]  ? save_trace+0xd6/0x250
[12538.948979]  check_prev_add.constprop.32+0xc36/0x14f0
[12538.971643]  ? keyring_compare_object+0x104/0x190
[12538.992738]  ? check_usage+0x550/0x550
[12539.009845]  ? sched_clock+0x5/0x10
[12539.025484]  ? sched_clock_cpu+0x18/0x1e0
[12539.043555]  __lock_acquire+0x1f12/0x38d0
[12539.061551]  ? trace_hardirqs_on+0x10/0x10
[12539.080554]  lock_acquire+0x14c/0x420
[12539.100330]  ? __might_fault+0xc4/0x1b0
[12539.119079]  __might_fault+0x119/0x1b0
[12539.135869]  ? __might_fault+0xc4/0x1b0
[12539.153234]  keyring_read_iterator+0x7e/0x170
[12539.172787]  ? keyring_read+0x110/0x110
[12539.190059]  assoc_array_subtree_iterate+0x97/0x280
[12539.211526]  keyring_read+0xe9/0x110
[12539.227561]  ? keyring_gc_check_iterator+0xc0/0xc0
[12539.249076]  keyctl_read_key+0x1b9/0x220
[12539.266660]  do_syscall_64+0xa5/0x4b0
[12539.283091]  entry_SYSCALL_64_after_hwframe+0x6a/0xdf

One way to prevent this deadlock scenario from happening is to not
allow writing to userspace while holding the key semaphore. Instead,
an internal buffer is allocated for getting the keys out from the
read method first before copying them out to userspace without holding
the lock.

That requires taking out the __user modifier from all the relevant
read methods as well as additional changes to not use any userspace
write helpers. That is,

  1) The put_user() call is replaced by a direct copy.
  2) The copy_to_user() call is replaced by memcpy().
  3) All the fault handling code is removed.

Compiling on a x86-64 system, the size of the rxrpc_read() function is
reduced from 3795 bytes to 2384 bytes with this patch.

Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: phram: fix a double free issue in error path

commit 49c64df880570034308e4a9a49c4bc95cf8cdb33 upstream.

The variable 'name' is released multiple times in the error path,
which may cause double free issues.
This problem is avoided by adding a goto label to release the memory
uniformly. And this change also makes the code a bit more cleaner.

Fixes: 4f678a58d335 ("mtd: fix memory leaks in phram_setup")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Joern Engel <joern@lazybastard.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200318153156.25612-1-wenyang@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: lpddr: Fix a double free in probe()

commit 4da0ea71ea934af18db4c63396ba2af1a679ef02 upstream.

This function is only called from lpddr_probe(). We free "lpddr" both
here and in the caller, so it's a double free. The best place to free
"lpddr" is in lpddr_probe() so let's delete this one.

Fixes: 8dc004395d5e ("[MTD] LPDDR qinfo probing.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200228092554.o57igp3nqhyvf66t@kili.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

docs: Fix path to MTD command line partition parser

commit fb2511247dc4061fd122d0195838278a4a0b7b59 upstream.

cmdlinepart.c has been moved to drivers/mtd/parsers/.

Fixes: a3f12a35c91d ("mtd: parsers: Move CMDLINE parser")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: spinand: Explicitly use MTD_OPS_RAW to write the bad block marker to OOB

commit 621a7b780bd8b7054647d53d5071961f2c9e0873 upstream.

When writing the bad block marker to the OOB area the access mode
should be set to MTD_OPS_RAW as it is done for reading the marker.
Currently this only works because req.mode is initialized to
MTD_OPS_PLACE_OOB (0) and spinand_write_to_cache_op() checks for
req.mode != MTD_OPS_AUTO_OOB.

Fix this by explicitly setting req.mode to MTD_OPS_RAW.

Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200218100432.32433-3-frieder.schrempf@kontron.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: free the nand_device object

commit 009264605cdf1b12962c3a46f75818d05452e890 upstream.

This patch releases the resources allocated in nanddev_init function.

Fixes: a7ab085d7c16 ("mtd: rawnand: Initialize the nand_device object")
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1579767768-32295-1-git-send-email-christophe.kerello@st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

locktorture: Print ratio of acquisitions, not failures

commit 80c503e0e68fbe271680ab48f0fe29bc034b01b7 upstream.

The __torture_print_stats() function in locktorture.c carefully
initializes local variable "min" to statp[0].n_lock_acquired, but
then compares it to statp[i].n_lock_fail. Given that the .n_lock_fail
field should normally be zero, and given the initialization, it seems
reasonable to display the maximum and minimum number acquisitions
instead of miscomputing the maximum and minimum number of failures.
This commit therefore switches from failures to acquisitions.

And this turns out to be not only a day-zero bug, but entirely my
own fault. I hate it when that happens!

Fixes: 0af3fe1efa53 ("locktorture: Add a lock-torture kernel module")
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: evh_bytechan: Fix out of bounds accesses

commit 3670664b5da555a2a481449b3baafff113b0ac35 upstream.

ev_byte_channel_send() assumes that its third argument is a 16 byte
array. Some places where it is called it may not be (or we can't
easily tell if it is). Newer compilers have started producing warnings
about this, so make sure we actually pass a 16 byte array.

There may be more elegant solutions to this, but the driver is quite
old and hasn't been updated in many years.

The warnings (from a powerpc allyesconfig build) are:

  In file included from include/linux/byteorder/big_endian.h:5,
                   from arch/powerpc/include/uapi/asm/byteorder.h:14,
                   from include/asm-generic/bitops/le.h:6,
                   from arch/powerpc/include/asm/bitops.h:250,
                   from include/linux/bitops.h:29,
                   from include/linux/kernel.h:12,
                   from include/asm-generic/bug.h:19,
                   from arch/powerpc/include/asm/bug.h:109,
                   from include/linux/bug.h:5,
                   from include/linux/mmdebug.h:5,
                   from include/linux/gfp.h:5,
                   from include/linux/slab.h:15,
                   from drivers/tty/ehv_bytechan.c:24:
  drivers/tty/ehv_bytechan.c: In function ‘ehv_bc_udbg_putc’:
  arch/powerpc/include/asm/epapr_hcalls.h:298:20: warning: array subscript 1 is outside array bounds of ‘const char[1]’ [-Warray-bounds]
    298 |  r6 = be32_to_cpu(p[1]);
  include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro ‘__be32_to_cpu’
     40 | #define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
        |                                                   ^
  arch/powerpc/include/asm/epapr_hcalls.h:298:7: note: in expansion of macro ‘be32_to_cpu’
    298 |  r6 = be32_to_cpu(p[1]);
        |       ^~~~~~~~~~~
  drivers/tty/ehv_bytechan.c:166:13: note: while referencing ‘data’
    166 | static void ehv_bc_udbg_putc(char c)
        |             ^~~~~~~~~~~~~~~~

Fixes: dcd83aaff1c8 ("tty/powerpc: introduce the ePAPR embedded hypervisor byte channel driver")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
[mpe: Trim warnings from change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200109183912.5fcb52aa@canb.auug.org.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbmem: Adjust indentation in fb_prepare_logo and fb_blank

commit 93166f5f2e4dc593cff8ca77ef828ac6f148b0f3 upstream.

Clang warns:

../drivers/video/fbdev/core/fbmem.c:665:3: warning: misleading
indentation; statement is not part of the previous 'else'
[-Wmisleading-indentation]
        if (fb_logo.depth > 4 && depth > 4) {
        ^
../drivers/video/fbdev/core/fbmem.c:661:2: note: previous statement is
here
        else
        ^
../drivers/video/fbdev/core/fbmem.c:1075:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
        return ret;
        ^
../drivers/video/fbdev/core/fbmem.c:1072:2: note: previous statement is
here
        if (!ret)
        ^
2 warnings generated.

This warning occurs because there are spaces before the tabs on these
lines. Normalize the indentation in these functions so that it is
consistent with the Linux kernel coding style and clang no longer warns.

Fixes: 1692b37c99d5 ("fbdev: Fix logo if logo depth is less than framebuffer depth")
Link: https://github.com/ClangBuiltLinux/linux/issues/825
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191218030025.10064-1-natechancellor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: si1133: read 24-bit signed integer for measurement

commit 328b50e9a0ad1fe8accdf8c19923deebab5e0c01 upstream.

The chip is configured in 24 bit mode. The values read from
it must always be treated as is. This fixes the issue by
replacing the previous 16 bits value by a 24 bits buffer.

This changes affects the value output by previous version of
the driver, since the least significant byte was missing.
The upper half of 16 bit values previously output are now
the upper half of a 24 bit value.

Fixes: e01e7eaf37d8 ("iio: light: introduce si1133")

Reported-by: Simon Goyette <simon.goyette@gmail.com>
Co-authored-by: Guillaume Champagne <champagne.guillaume.c@gmail.com>
Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com>
Signed-off-by: Guillaume Champagne <champagne.guillaume.c@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: sunxi: Fix DE2 clocks register range

commit da180322582bd9db07f29e6d4a2d170afde0703f upstream.

As it can be seen from DE2 manual, clock range is 0x10000.

Fix it.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Fixes: 73f122c82775 ("ARM: dts: sun8i: a83t: Add display pipeline")
Fixes: 05a43a262d03 ("ARM: dts: sun8i: r40: Add HDMI pipeline")
Fixes: 21b299209330 ("ARM: sun8i: v3s: add device nodes for DE2 display pipeline")
Fixes: d8c6f1f0295c ("ARM: sun8i: h3/h5: add DE2 CCU device node for H3")
[wens@csie.org: added fixes tags]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: potential information leak in do_fb_ioctl()

commit d3d19d6fc5736a798b118971935ce274f7deaa82 upstream.

The "fix" struct has a 2 byte hole after ->ywrapstep and the
"fix = info->fix;" assignment doesn't necessarily clear it. It depends
on the compiler. The solution is just to replace the assignment with an
memcpy().

Fixes: 1f5e31d7e55a ("fbmem: don't call copy_from/to_user() with mutex held")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andrea Righi <righi.andrea@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Peter Rosin <peda@axentia.se>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200113100132.ixpaymordi24n3av@kili.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-debug: fix displaying of dma allocation type

commit 9bb50ed7470944238ec8e30a94ef096caf9056ee upstream.

The commit 2e05ea5cdc1a ("dma-mapping: implement dma_map_single_attrs using
dma_map_page_attrs") removed "dma_debug_page" enum, but missed to update
type2name string table. This causes incorrect displaying of dma allocation
type.
Fix it by removing "page" string from type2name string table and switch to
use named initializers.

Before (dma_alloc_coherent()):
k3-ringacc 4b800000.ringacc: scather-gather idx 2208 P=d1140000 N=d114 D=d1140000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable
k3-ringacc 4b800000.ringacc: scather-gather idx 2216 P=d1150000 N=d115 D=d1150000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable

After:
k3-ringacc 4b800000.ringacc: coherent idx 2208 P=d1140000 N=d114 D=d1140000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable
k3-ringacc 4b800000.ringacc: coherent idx 2216 P=d1150000 N=d115 D=d1150000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable

Fixes: 2e05ea5cdc1a ("dma-mapping: implement dma_map_single_attrs using dma_map_page_attrs")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: bcm_sf2: Fix overflow checks

commit d0802dc411f469569a537283b6f3833af47aece9 upstream.

Commit f949a12fd697 ("net: dsa: bcm_sf2: fix buffer overflow doing
set_rxnfc") tried to fix the some user controlled buffer overflows in
bcm_sf2_cfp_rule_set() and bcm_sf2_cfp_rule_del() but the fix was using
CFP_NUM_RULES, which while it is correct not to overflow the bitmaps, is
not representative of what the device actually supports. Correct that by
using bcm_sf2_cfp_rule_size() instead.

The latter subtracts the number of rules by 1, so change the checks from
greater than or equal to greater than accordingly.

Fixes: f949a12fd697 ("net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/gr/gp107,gp108: implement workaround for HW hanging during init

[ Upstream commit 028a12f5aa829b4ba6ac011530b815eda4960e89 ]

Certain boards with GP107/GP108 chipsets hang (often, but randomly) for
unknown reasons during GR initialisation.

The first tell-tale symptom of this issue is:

nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 409800 [ TIMEOUT ]

appearing in dmesg, likely followed by many other failures being logged.

Karol found this WAR for the issue a while back, but efforts to isolate
the root cause and proper fix have not yielded success so far. I've
modified the original patch to include a few more details, limit it to
GP107/GP108 by default, and added a config option to override this choice.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>