review.tizen.org Git - platform/kernel/linux-rpi.git/log

drm/udl: Replace semaphore with a simple wait queue

UDL driver uses a semaphore for controlling the emptiness of FIFO in a
slightly funky way. This patch replaces it with a wait queue and
controls the emptiness with the standard wait_event*() macro instead,
which is a more straightforward implementation.

While we are at it, drop the dead code for delayed semaphore down,
too.

Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220804075826.27036-2-tiwai@suse.de

drm/format-helper: Rename parameter vmap to src

Rename the parameter vmap to src in all functions. The parameter
contains the locations of the source data and the new name says that.

v3:
* fix typo in commit message

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-15-tzimmermann@suse.de

drm/format-helper: Move destination-buffer handling into internal helper

The format-convertion helpers handle several cases for different
values of destination buffer and pitch. Move that code into the
internal helper drm_fb_xfrm() and avoid quite a bit of duplication.

v2:
* remove a duplicated blank line (Jose)
* use drm_format_info_bpp() (Sam)
* fix vaddr_cached_hint bug (Sam)
* add TODO on vaddr location (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-14-tzimmermann@suse.de

drm/format-helper: Rework XRGB8888-to-MONO conversion

Update XRGB8888-to-MONO conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().

v2:
* rebase after renaming CMA helpers to DMA helpers
* update documentation (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-13-tzimmermann@suse.de

drm/format-helper: Rework XRGB8888-to-GRAY8 conversion

Update XRGB8888-to-GRAY8 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().

v2:
* update documentation (Sam)
* add TODO on vaddr location (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-12-tzimmermann@suse.de

drm/format-helper: Rework XRGB8888-to-XRGB2101010 conversion

Update XRGB8888-to-XRGB2101010 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().

v2:
* update documentation (Sam)
* add TODO on vaddr location (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-11-tzimmermann@suse.de

drm/format-helper: Rework RGB888-to-XRGB8888 conversion

Update RGB888-to-XRGB8888 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().

v2:
* add TODO on vaddr location (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-10-tzimmermann@suse.de

drm/format-helper: Rework RGB565-to-XRGB8888 conversion

Update RGB565-to-XRGB8888 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().

v2:
* add TODO on vaddr location (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-9-tzimmermann@suse.de

drm/format-helper: Rework XRGB8888-to-RGB888 conversion

Update XRGB8888-to-RGB888 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().

v2:
* update documentation (Sam)
* add TODO on vaddr location (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-8-tzimmermann@suse.de

drm/format-helper: Rework XRGB8888-to-RGBG565 conversion

Update XRGB8888-to-RGB565 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().

v2:
* update new Kunit tests
* update documentation (Sam)
* add TODO on vaddr location (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-7-tzimmermann@suse.de

drm/format-helper: Rework XRGB8888-to-RGBG332 conversion

Update XRGB8888-to-RGB332 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().

v2:
* rebase onto refactored Kunit tests
* update documentation (Sam)
* add TODO on vaddr location (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-6-tzimmermann@suse.de

drm/format-helper: Convert drm_fb_swab() to struct iosys_map

Convert drm_fb_swab() to use struct iosys_map() and convert users. The
new interface supports multi-plane color formats, but implementation
only supports a single plane for now.

v2:
* use drm_format_info_bpp() (Sam)
* update documentation (Sam)
* add TODO on vaddr location (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-5-tzimmermann@suse.de

drm/format-helper: Merge drm_fb_memcpy() and drm_fb_memcpy_toio()

Merge drm_fb_memcpy() and drm_fb_memcpy_toio() into a drm_fb_memcpy()
that uses struct iosys_map for buffers. The new function also supports
multi-plane color formats. Convert all users of the original helpers.

v2:
* rebase onto refactored mgag200
* use drm_formap_info_bpp() (Sam)
* do static init in hyperv and mgag200 (Sam)
* update documentation (Sam)
* add TODO on vaddr location (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-4-tzimmermann@suse.de

drm/format-helper: Provide drm_fb_blit()

Provide drm_fb_blit() that works with struct iosys_map. Update all
users of drm_fb_blit_toio(), which required a destination buffer in
I/O memory.

This patch only updates the function's interface. The implementation
still relies on the destination buffer to be located in I/O memory.
See the follow-up patches for implementational changes. The new
function's interface works with multi-plane color formats, but again
implementation only supports a single plane for now.

v2:
* rebase onto refactored simpledrm
* use IOSYS_MAP_INIT_VADDR() (Sam)
* update the commit message on the use of I/O memory (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-3-tzimmermann@suse.de

iosys-map: Add IOSYS_MAP_INIT_VADDR_IOMEM()

Add IOSYS_MAP_INIT_VADDR_IOMEM() for static init of variables of type
struct iosys_map.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-2-tzimmermann@suse.de

drm/panfrost: Add support for devcoredump

In the event of a job timeout, debug dump information will be written into
/sys/class/devcoredump.

Inspired by etnaviv's similar feature.

Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220729144610.2105223-3-adrian.larumbe@collabora.com

drm/panfrost: Add specific register offset macros for JS and MMU AS

Each Panfrost job has its own job slot and MMU address space set of
registers, which are selected with a job-specific index.

Turn the shift and stride used for selection of the right register set base
into a define rather than using magic numbers.

Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220729144610.2105223-2-adrian.larumbe@collabora.com

gpu: lontium-lt9611: Fix NULL pointer dereference in lt9611_connector_init()

A NULL check for bridge->encoder shows that it may be NULL, but it
already been dereferenced on all paths leading to the check.
812 if (!bridge->encoder) {

Dereference the pointer bridge->encoder.
810 drm_connector_attach_encoder(&lt9611->connector, bridge->encoder);

Signed-off-by: Zeng Jingxiang <linuszeng@tencent.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220727073119.1578972-1-zengjx95@gmail.com

drm/simpledrm: Convert to atomic helpers

Replace the simple-KMS helpers with the regular atomic helpers. The
regular helpers are better architectured and therefore allow for easier
code sharing among drivers. No functional changes.

v3:
* remove empty CRTC helpers atomic_{enable, disable} (Javier)
* unconditionally run drm_atomic_helper_check_plane_state()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801135028.30647-6-tzimmermann@suse.de

drm/simpledrm: Compute framebuffer stride if not set

Compute the framebuffer's scanline stride length if not given by
the simplefb data.

v3:
* get pixel size from drm_format_info_bpp() (Geert, Javier)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801135028.30647-5-tzimmermann@suse.de

drm/simpledrm: Remove pdev field from device structure

Replace the remaining uses of the field pdev by upcasts from the Linux
device and remove the field.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801135028.30647-4-tzimmermann@suse.de

drm/simpledrm: Inline device-init helpers

Inline the helpers for initializing the hardware FB, the memory
management and the modesetting into the device-creation function.
No functional changes.

In the original code, init helpers depended on values from other
init helpers. Inlining the functions ensures that steps are taken
in the correct order. It's also easier to see what happens. The
device is simple enough to be set up in one function. Only clocks
and regulators are still set up in their own helpers, as their
presence is system dependent.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801135028.30647-3-tzimmermann@suse.de

drm/simpledrm: Remove mem field from device structure

Remove the unused mem field from struct simpledrm_device.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801135028.30647-2-tzimmermann@suse.de

drm/simpledrm: Fix return type of simpledrm_simple_display_pipe_mode_valid()

When booting a kernel compiled with clang's CFI protection
(CONFIG_CFI_CLANG), there is a CFI failure in
drm_simple_kms_crtc_mode_valid() when trying to call
simpledrm_simple_display_pipe_mode_valid() through ->mode_valid():

[    0.322802] CFI failure (target: simpledrm_simple_display_pipe_mode_valid+0x0/0x8):
...
[    0.324928] Call trace:
[    0.324969]  __ubsan_handle_cfi_check_fail+0x58/0x60
[    0.325053]  __cfi_check_fail+0x3c/0x44
[    0.325120]  __cfi_slowpath_diag+0x178/0x200
[    0.325192]  drm_simple_kms_crtc_mode_valid+0x58/0x80
[    0.325279]  __drm_helper_update_and_validate+0x31c/0x464
...

The ->mode_valid() member in 'struct drm_simple_display_pipe_funcs'
expects a return type of 'enum drm_mode_status', not 'int'. Correct it
to fix the CFI failure.

Cc: stable@vger.kernel.org
Fixes: 11e8f5fd223b ("drm: Add simpledrm driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1647
Reported-by: Tomasz Paweł Gajc <tpgxyz@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220725233629.223223-1-nathan@kernel.org
(cherry picked from commit 0c09bc33aa8e9dc867300acaadc318c2f0d85a1e)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

drm: Remove the drm_get_unmapped_area() helper

This has been only used by the vmwgfx driver and vmwgfx over the last
year removed support for transparent hugepages on vram leaving
drm_get_unmapped_area completely unused.

There's no point in keeping unused code in core drm.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220425203152.1314211-2-zack@kde.org

drm/vmwgfx: Remove unused hugepage support

There's no point in explicitly trying to align virtual memory to
facilitate huge page table entries or huge page memory in buffer objects
given that they're not being used.

Transparent hugepages support for vram allocations has been gradually
retired over the last two years making alignment of unmapped areas
unneeded and pointless.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425203152.1314211-1-zack@kde.org

drm/vmwgfx: cleanup comments

Remove second 'should'

Spelling replacements
aqcuire     -> acquire
applcations -> applications
assumings   -> assumes
begining    -> beginning
commited    -> committed
contol      -> control
inbetween   -> in between
resorces    -> resources
succesful   -> successful
successfule -> successful

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220730135704.2889434-1-trix@redhat.com

drm/vmwgfx: clean up some error pointer checking

The vmw_user_bo_noref_lookup() function cannot return NULL. If it
could, then this function would return PTR_ERR(NULL) which is success.
Returning success without initializing "*vmw_bo_p = vmw_bo;" would
lead to an uninitialized variable bug in the caller. Smatch complains
about this:

drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:1177 vmw_translate_mob_ptr() warn: passing zero to 'PTR_ERR'
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:1314 vmw_cmd_dx_bind_query() error: uninitialized symbol 'vmw_bo'.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YtZ9qrKeBqmmK8Hv@kili

drm: fix whitespace in drm_plane_create_color_properties()

The drm_property_create_enum() call for "COLOR_RANGE" contains a tab
character in the middle of the argument list.

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220803204240.33409-1-contact@emersion.fr

drm/todo: remove task to rename CMA helpers

Both, GEM and FB, CMA helpers were renamed to "GEM DMA" and "FB DMA",
hence the task can be removed.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-6-dakr@redhat.com

drm/gem: rename struct drm_gem_dma_object.{paddr => dma_addr}

The field paddr of struct drm_gem_dma_object holds a DMA address, which
might actually be a physical address. However, depending on the platform,
it can also be a bus address or a virtual address managed by an IOMMU.

Hence, rename the field to dma_addr, which is more applicable.

In order to do this renaming the following coccinelle script was used:

```
@@
struct drm_gem_dma_object *gem;
@@

- gem->paddr
+ gem->dma_addr

@@
struct drm_gem_dma_object gem;
@@

- gem.paddr
+ gem.dma_addr

@exists@
typedef dma_addr_t;
symbol paddr;
@@

dma_addr_t paddr;
<...
- paddr
+ dma_addr
...>

@@
symbol paddr;
@@
dma_addr_t
- paddr
+ dma_addr
;

```

This patch is compile-time tested with:

```
make ARCH={x86_64,arm,arm64} allyesconfig
make ARCH={x86_64,arm,arm64} drivers/gpu/drm`
```

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-5-dakr@redhat.com

drm/gem: rename GEM CMA helpers to GEM DMA helpers

Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
#!/bin/bash

DIRS="drivers/gpu include/drm Documentation/gpu"

REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"

REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"

REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
       sed -i -E "$REGEX_SED_UPPER" $ff
done

# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
       sed -i -E "$REGEX_SED_LOWER" $ff
done

# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done

# Rename all 'cma_obj's to 'dma_obj'.
for ff in $(grep -RiHl "cma_obj" $DIRS)
do
sed -i -E "s/cma_obj/dma_obj/g" $ff
done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

    -       select CMA if HAVE_DMA_CONTIGUOUS
    +       select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".

Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com

drm/fb: rename FB CMA helpers to FB DMA helpers

Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy
of APIs (mm/cma -> dma -> fb dma) calling them "FB DMA" seems to be
more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
#!/bin/bash

DIRS="drivers/gpu include/drm Documentation/gpu"

REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"

REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(FB)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(fb)_cma_(${REGEX_SYM_LOWER}*)"

REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
       sed -i -E "$REGEX_SED_UPPER" $ff
done

# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
       sed -i -E "$REGEX_SED_LOWER" $ff
done

# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

    -       select CMA if HAVE_DMA_CONTIGUOUS
    +       select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "FB CMA", but not "GEM CMA".

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-3-dakr@redhat.com

drm/fb: remove unused includes of drm_fb_cma_helper.h

Quite a lot of drivers include the drm_fb_cma_helper.h header file
without actually making use of it's provided API, hence remove those
includes.

Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-2-dakr@redhat.com

Merge drm/drm-next into drm-misc-next

Backmerging to pick up fixes from amdgpu.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

drm/mgag200: Remove type field from struct mga_device

Each model's specific code is located in a separate file. The type
field in struct mga_device is no unused. Remove it.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-15-tzimmermann@suse.de

drm/mgag200: Move CRTC atomic_enable to model-specific code

The CRTC atomic_enable helper contains per-model branches for
G200ER, G200EV and G200SE devices. Implement a dedicated helper
for each of them and remove the branches from the shared helper.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-14-tzimmermann@suse.de

drm/mgag200: Move mode-config to model-specific code

Move the mode-config code into model-specific code and call the
plane/CRTC helpers as needed. This will help with providing per-
model implementations of individual helpers.

Duplication of the pipeline init function is accepted. Some macros
simplify this for shared helpers.

v3:
* clean up style

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-13-tzimmermann@suse.de

drm/mgag200: Provide per-device callbacks for PIXPLLC

Move the PIXPLLC code into per-model source files and wire it up
with per-model callbacks. No functional changes.

The PIXPLLC pixel-clock is part of the CRTC, but really separate
hardware that varies with each model of the G200. Move the PIXPLLC
code for each model into the per-model source file and call it from
CRTC helpers via device functions.

This allows to remove struct mgag200_pll and the related code. The
new callbacks behave like the CRTC's atomic_check and atomic_enable
functions.

v3:
* clean up style

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-12-tzimmermann@suse.de

drm/mgag200: Provide per-device callbacks for BMC synchronization

Move the BMC-related code into its own file and wire it up with device
callbacks.

While programming a new display mode, G200EW3 and G200WB have to de-
synchronize with the BMC. Synchronization is done via VIDRST pins
and controlled via VRSTEN and HRSTEN bits. Move the BMC code behind
a serviceable interface and call it from the CRTC's enable and
disable functions.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-11-tzimmermann@suse.de

drm/mgag200: Add per-device callbacks

While currently empty, the device callbacks will allow mgag200's
modesetting code to interact with the BMC and PIXPLLC.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-10-tzimmermann@suse.de

drm/mgag200: Set SCROFF in primary-plane code

The SCROFF bit controls reading the primary plane's scanout buffer
from video memory. Set it from primary-plane code, instead of CRTC
code.

v3:
* only flip SCROFF when enabling/disabling the plane (Jocelyn)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-9-tzimmermann@suse.de

drm/mgag200: Replace simple-KMS with regular atomic helpers

Drop simple-KMS in favor of regular atomic helpers. Makes the code
more modular and hence better to adapt to per-model requirements.

The simple-KMS helpers provide few extra features, so the patch is
mostly about open-coding what simple-KMS does. The simple-KMS helpers
do mix up plane and CRTC state. Changing to regular atomic helpers
requires to split some of the simple-pipe functions into per-plane
and per-CRTC code

No functional changes.

v3:
* always run drm_atomic_helper_check_plane_state()
* clean up style

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-8-tzimmermann@suse.de

drm/mgag200: Reorganize before dropping simple-KMS helpers

Move around some modesetting code before dropping simple-KMS helpers.
Makes the next patch more readable. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-7-tzimmermann@suse.de

drm/mgag200: Store primary plane's color format in CRTC state

Store the primary plane's color format in the CRTC state and use
it for programming the CRTC's gamma LUTs.

Gamma tables (i.e., color management) are provided by the CRTC, but
depend in the primary plane's color format. Store the format in the
CRTC state and use it. This has not been an issue with simple-KMS
helpers, which mix-up plane and CRTC state to some extent. For using
regular atomic helpers, it's necessary to distinguish between the two.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-6-tzimmermann@suse.de

drm/mgag200: Acquire I/O-register lock in atomic_commit_tail function

Hold I/O-register lock in atomic_commit_tail to protect all pipeline
updates at once. Protects against concurrent I/O access in get-modes
helper.

Complex modesetting operations involve mode changes, plane updates and
possibly BMC updates. Make all this atomic wrt to reading display modes
via EDID. It's not so much an issue with simple-KMS helpers, but will
become necessary for using regular atomic helpers.

v4:
* remove empty line

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-5-tzimmermann@suse.de

drm/mgag200: Move ER/EW3 register initialization to per-model code

The register initialization code contains special cases for G200ER
and G200EW3 hardware. Move this to per-model code.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-4-tzimmermann@suse.de

drm/mgag200: Move DAC-register setup into model-specific code

Provide an init function for each model's DAC registers. Remove
the shared helper.

The code for initializing the DAC registers consisted of a large
table of default value, plus many exceptions for the various G200
models. Providing a per-model implementation makes if more readable.
At some point, some of the initialization should probably move into
the modesetting code.

v2:
* don't duplicate DAC values unnecessarily (Sam, Jocelyn)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-3-tzimmermann@suse.de

drm/mgag200: Split mgag200_modeset_init()

Split mgag200_modeset_init() into smaller helpers to initialize
the mode_config structure and the pipeline. This will be helpful
for transforming this code into per-model functions. No functional
changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-2-tzimmermann@suse.de

drm/tests: Split up test cases in igt_check_drm_format_min_pitch

The igt_check_drm_format_min_pitch() function had a lot of
KUNIT_EXPECT_* calls, all of which ended up allocating and initializing
various test assertion structures on the stack.

This behavior was producing -Wframe-larger-than warnings on PowerPC, i386,
and MIPS architectures, such as:

drivers/gpu/drm/tests/drm_format_test.c: In function 'igt_check_drm_format_min_pitch':
drivers/gpu/drm/tests/drm_format_test.c:271:1: error: the frame size of
3712 bytes is larger than 2048 bytes

So, the igt_check_drm_format_min_pitch() test case was split into three
smaller functions: one testing single plane formats, one testing
multi-planar formats, and the other testing tiled formats.

Fixes: 0421bb0baa84 ("drm: selftest: convert drm_format selftest to KUnit")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220729124726.748221-1-mairacanal@riseup.net

drm/dp_mst: fix drm_dp_dpcd_read return value checks

drm_dp_dpcd_read returns the number of bytes read. The previous code
would print garbage on DPCD error, and would exit with on error on
success.

Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: cb897542c6d2 ("drm/dp_mst: Fix W=1 warnings")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/473500/

drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_rgb565()

Extend the existing test cases to test the conversion from XRGB8888 to
RGB565.

The documentation and the color picker available on [1] are useful
resources to understand this patch and validate the values returned by
the conversion function.

Tested-by: Tales L. Aparecida <tales.aparecida@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: http://www.barth-dev.de/online/rgb565-color-picker/
Link: https://patchwork.freedesktop.org/patch/msgid/20220726230916.390575-5-jose.exposito89@gmail.com

drm/format-helper: Support multiple target formats results

In order to support multiple destination format conversions, store the
destination pitch and the expected result in its own structure.

Tested-by: Tales L. Aparecida <tales.aparecida@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220726230916.390575-4-jose.exposito89@gmail.com

drm/format-helper: Rename test cases to make them more generic

The tests available at the moment only check the conversion from
XRGB8888 to RGB332. However, more conversions will be tested in the
future.

In order to make the struct and functions present in the tests more
generic, rename xrgb8888_to_rgb332_* to convert_xrgb8888_*.

Tested-by: Tales L. Aparecida <tales.aparecida@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220726230916.390575-3-jose.exposito89@gmail.com

drm/format-helper: Fix test on big endian architectures

The tests fail on big endian architectures, like PowerPC:

$ ./tools/testing/kunit/kunit.py run \
--kunitconfig=drivers/gpu/drm/tests \
--arch=powerpc --cross_compile=powerpc64-linux-gnu-

Transform the XRGB8888 buffer from little endian to the CPU endian
before calling the conversion function to avoid this error.

Fixes: 8f456104915f ("drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_rgb332()")
Reported-by: David Gow <davidgow@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220726230916.390575-2-jose.exposito89@gmail.com

drm/todo: remove task for idr_init_base()

All IDRs in the DRM core and drivers which are applicable for using
idr_init_base() over idr_init() should be set up to use a proper base in
order to avoid unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701190227.284783-3-dakr@redhat.com

drm/via: use idr_init_base() to initialize dev_priv->object_idr

idr_init_base(), implemented by commit 6ce711f27500 ("idr: Make 1-based
IDRs more efficient"), let us set an arbitrary base other than
idr_init(), which uses base 0.

Since, for this IDR, no ID < 1 is ever requested/allocated, using
idr_init_base(&idr, 1) avoids unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701190227.284783-2-dakr@redhat.com

drm/v3d: use idr_init_base() to initialize v3d_priv->perfmon.idr

idr_init_base(), implemented by commit 6ce711f27500 ("idr: Make 1-based
IDRs more efficient"), let us set an arbitrary base other than
idr_init(), which uses base 0.

Since, for this IDR, no ID < 1 is ever requested/allocated, using
idr_init_base(&idr, 1) avoids unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701190227.284783-1-dakr@redhat.com

drm/sis: use idr_init_base() to initialize dev_priv->object_idr

idr_init_base(), implemented by commit 6ce711f27500 ("idr: Make 1-based
IDRs more efficient"), let us set an arbitrary base other than
idr_init(), which uses base 0.

Since, for this IDR, no ID < 1 is ever requested/allocated, using
idr_init_base(&idr, 1) avoids unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701185303.284082-8-dakr@redhat.com

drm: use idr_init_base() to initialize mode_config.tile_idr

idr_init_base(), implemented by commit 6ce711f27500 ("idr: Make 1-based
IDRs more efficient"), let us set an arbitrary base other than
idr_init(), which uses base 0.

Since, for this IDR, no ID < 1 is ever requested/allocated, using
idr_init_base(&idr, 1) avoids unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701185303.284082-7-dakr@redhat.com

drm: use idr_init_base() to initialize mode_config.object_idr

idr_init_base(), implemented by commit 6ce711f27500 ("idr: Make 1-based
IDRs more efficient"), let us set an arbitrary base other than
idr_init(), which uses base 0.

Since, for this IDR, no ID < 1 is ever requested/allocated, using
idr_init_base(&idr, 1) avoids unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701185303.284082-6-dakr@redhat.com

drm: use idr_init_base() to initialize master->lessee_idr

idr_init_base(), implemented by commit 6ce711f27500 ("idr: Make 1-based
IDRs more efficient"), let us set an arbitrary base other than
idr_init(), which uses base 0.

Since, for this IDR, no ID < 1 is ever requested/allocated, using
idr_init_base(&idr, 1) avoids unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701185303.284082-5-dakr@redhat.com

drm: use idr_init_base() to initialize master->magic_map

idr_init_base(), implemented by commit 6ce711f27500 ("idr: Make 1-based
IDRs more efficient"), let us set an arbitrary base other than
idr_init(), which uses base 0.

Since, for this IDR, no ID < 1 is ever requested/allocated, using
idr_init_base(&idr, 1) avoids unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701185303.284082-4-dakr@redhat.com

drm/amdgpu: use idr_init_base() to initialize fpriv->bo_list_handles

idr_init_base(), implemented by commit 6ce711f27500 ("idr: Make 1-based
IDRs more efficient"), let us set an arbitrary base other than
idr_init(), which uses base 0.

Since, for this IDR, no ID < 1 is ever requested/allocated, using
idr_init_base(&idr, 1) avoids unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701185303.284082-3-dakr@redhat.com

drm/amdgpu: use idr_init_base() to initialize mgr->ctx_handles

idr_init_base(), implemented by commit 6ce711f27500 ("idr: Make 1-based
IDRs more efficient"), let us set an arbitrary base other than
idr_init(), which uses base 0.

Since, for this IDR, no ID < 1 is ever requested, using
idr_init_base(&idr, 1) avoids unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701185303.284082-2-dakr@redhat.com

fbdev: Make registered_fb[] private to fbmem.c

No driver access this anymore, except for the olpc dcon fbdev driver but
that has been marked as broken anyways by commit de0952f267ff ("staging:
olpc_dcon: mark driver as broken").

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220725075400.68478-1-javierm@redhat.com

drm/panel/panel-sitronix-st7701: Add Densitron DMT028VGHMCMI-1A TFT

Add support for Densitron DMT028VGHMCMI-1A TFT matrix into this driver.
This is a DSI-attached 480x640 2.83 inch panel.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220725151703.319939-2-marex@denx.de

dt-bindings: display: panel: sitronix,st7701: Add Densitron DMT028VGHMCMI-1A TFT

Add compatible string for Densitron DMT028VGHMCMI-1A TFT matrix.
This is a DSI-attached 480x640 2.83 inch panel.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220725151703.319939-1-marex@denx.de

drm: Fix typo 'the the' in comment

Replace 'the the' with 'the' in the comment.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220721062345.46842-1-slark_xiao@163.com

Merge tag 'topic/nouveau-misc-2022-07-27' of git://anongit.freedesktop.org/drm/drm into drm-next

drm/nouveau-misc: display patches.

These are just some precursor and cleanup display patches from Ben,
tested by Lyude.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAPM=9ty0R37q0mohBr_CegpYLXK2=fAH54QfAsMhHfPygTsdQA@mail.gmail.com

Merge tag 'amd-drm-next-5.20-2022-07-26' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amdgpu:
- VCN4 fixes
- RAS support for UMC 8.10
- ACP support for jadeite platforms
- NBIO HDP flush fixes
- Misc spelling and grammar fixes
- Runtime PM fixes
- Non-DC HPD fix
- Clean up amdgpu DM code
- DSC fixes
- Expose some additional GFXOFF data via debugfs
- More FP clean up for new DCN blocks
- PPC DC FP fixes
- DCN 3.1.4 fixes
- DC DML stack usage fixes
- GMC fixes
- SPM fixes for RDNA2

amdkfd:
- MMU notifier fix
- Mutex fix

UAPI:
- Add a comment about VCN4 unified queues
- IP version information for UMDs
Proposed mesa change: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17411/diffs?commit_id=c8a63590dfd0d64e6e6a634dcfed993f135dd075

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220726181536.5759-1-alexander.deucher@amd.com

drm/nouveau/disp: move DAC load detection method

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: add output class

Will be used to more cleanly implement existing method interfaces that
take some confusing (IEDTkey, inherited from VBIOS, which RM no longer
uses on Ampere) match values to determine which display path to operate
on.

Methods will be protected from racing with supervisor, and from being
called where they shouldn't be (ie. without an OR assigned).

v2:
- use ?: (lyude)
v3:
- fix return code if noacquire() method fails

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: add supervisor mutex

Will be used to protect NVIF_CLASS_OUTP method calls from racing with
in-progress supervisor handling.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: add conn method to query HPD pin status

And use it to bail early in DP detection and avoid futile AUX transactions.

This could be used on other connector types too in theory, but it's not
something we've ever done before and I'd rather not risk breaking working
systems without looking into it more closely.

It's safe for DP though. We already do this by checking an AUX register
that contains HPD status and aborting the transaction. However, this is
much deeper in the stack - after taking various mutexes, poking HW for no
good reason, and making a mess in debug logs.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: add connector class

Will be used to provide more solid driver interfaces in general, but
the immediate motivation is work towards fixing issues with handling
hotplug/DP IRQ events.

Its use is currently limited to where we support non-polled hotplug
already (ie. any GPU since NV40ish era, where our DCB handling works
well enough), until that gets cleaned up someday.

v2:
- use ?: (lyude)

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: add common channel class handling

Replaces a bunch of unnecessarily duplicated boilerplate in per-chipset
code with a simpler, common, implementation.

Channel "awaken" notify code is completely gone for now. KMS has never
made use of it so far, and event notify handling is about to be changed
in general anyway.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: split sor hda funcs out to their own struct

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: split sor dp funcs out to their own struct

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: replace hda func pointer check with flag

Simpler, and less error-prone than a separate set of function pointers.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: merge nv50_disp_new_() and nvkm_disp_new()

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: group supervisor-related struct members

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: merge head/outp/ior code into chipset files

No changes to code at all here, just shuffling it around and removing
a bunch of (now unnecessary) forward-declarations from headers.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: add common class handling between <nv50 and >=nv50

About to expose head/output path/connector objects everywhere, so we will
need support for child classes prior to nv50 now.

Somewhat cleaner than the code >=nv50 used previously.

v2:
- use ?: (lyude)

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: collapse nv50_disp into nvkm_disp

Dump of one struct's members into another, with a couple of list
renames because of collisions.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: collapse nv50_disp_func into nvkm_disp_func

Aside from a chicken-and-egg problem with a duplicate 'root' member,
this is a straight dump of function pointers from one struct into
another.

The left-over wrapping mess in >=nv50 structs will be fixed later.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: clean up nvkm_outp constructors

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/disp: collapse nvkm_dp into nvkm_outp

There should be no changes to code here other than modifying the
dereferences.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/fsl-dcu: Use drm_plane_helper_destroy()

Replace the driver's own function with drm_plane_helper_destroy(). No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-8-tzimmermann@suse.de

drm/armada: Use drm_plane_helper_destroy()

Replace the driver's own function with drm_plane_helper_destroy(). No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-7-tzimmermann@suse.de

drm/plane-helper: Export individual helpers

Export the individual plane helpers that make up the plane functions and
align the naming with other helpers. The plane helpers are for non-atomic
modesetting and exporting them will simplify a later conversion of drivers
to atomic modesetting.

With struct drm_plane_funcs removed from drm_plane_helper.h, also remove
the include statements. It only needs linux/types.h for uint32_t and a
number of forward declarations.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-6-tzimmermann@suse.de

drm: Remove unnecessary include statements of drm_plane_helper.h

Remove the include statement for drm_plane_helper.h from all the files
that don't need it. Althogh the header file is almost empty, many drivers
include it somewhere.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-5-tzimmermann@suse.de

drm/atomic-helper: Remove _HELPER_ infix from DRM_PLANE_HELPER_NO_SCALING

Rename DRM_PLANE_HELPER_NO_SCALING to DRM_PLANE_NO_SCALING. The constant
is not really a helper, but rather a characteristic of the plane itself.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-4-tzimmermann@suse.de

drm/atomic-helper: Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers

The macro DRM_PLANE_HELPER_NO_SCALING is only useful with the interfaces
in drm_atomic_helper.h, but defined in drm_plane_helper.h. So half of
DRM includes the latter header file for using this macro. Move the macro
and remove the include statements.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-3-tzimmermann@suse.de

drm/vmwgfx: Remove trailing whitespace

Fix coding style. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-2-tzimmermann@suse.de

drm/amd/display: Reduce stack size in the mode support function

When we use the allmodconfig option we see the following error:

drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c: In function 'dml32_ModeSupportAndSystemConfigurationFull':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:3799:1: error: the frame size of 2464 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
3799 | } // ModeSupportAndSystemConfigurationFull

This commit fixes this issue by moving part of the mode support
operation from ModeSupportAndSystemConfigurationFull to a dedicated
function.

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.196

This version brings along following fixes:

- Copy crc_skip_count when duplicating CRTC state
- Add debug option for idle optimizations on cursor updates
- Disable MPC split for DCN32/321
- Add missing ODM 2:1 policy logic
- Update DCN32 and DCN321 SR latencies
- Add reinstate dram in the FPO logic
- Add dc_ctx to link_enc_create() parameters
- Cache cursor when cursor exceeds 64x64
- Add support for manual DMUB FAMS trigger
- Fix dpstreamclk programming
- Add missing AUDIO_DTO_SEL reg field
- Add OTG/ODM functions
- Use correct clock source constructor for DCN314
- Use correct DTO_SRC_SEL for 128b/132b encoding
- Add pixel rate div calcs and programming
- Remove FPU flags from DCN30 Makefile
- Create patch bounding box function for isolate FPU
- Move mclk calculation function to DML
- Remove FPU operations from dcn201 resources
- Fallback to SW cursor if SubVP + cursor too big
- Drop unnecessary FPU flags on dcn302 files
- Reboot while unplug hdcp enabled dp from mst hub
- Reset pipe count when iterating for DET override
- Calculate MALL cache lines based on Mblks required
- Fix two MPO videos in single display ODM combine mode
- Guard against zero memory channels
- Updates SubVP + SubVP DRR cases updates
- Fix OPTC function pointers for DCN314
- Add enable/disable FIFO callbacks to stream setup
- Avoid MPC infinite loop

Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Copy crc_skip_count when duplicating CRTC state

[Why]

crc_skip_count is used to track how many frames to skip to allow the OTG
CRC engine to "warm up" before it outputs correct CRC values.
Experimentally, this seems to be 2 frames.

When duplicating CRTC states, this value was not copied to the
duplicated state. Therefore, when this state is committed, we will
needlessly wait 2 frames before outputing CRC values. Even if the CRC
engine is already warmed up.

[How]

Copy the crc_skip_count as part of dm_crtc_duplicate_state.

Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>