kaiser: do not set _PAGE_NX on pgd_none

native_pgd_clear() uses native_set_pgd(), so native_set_pgd() must
avoid setting the _PAGE_NX bit on an otherwise pgd_none() entry:
usually that just generated a warning on exit, but sometimes
more mysterious and damaging failures (our production machines
could not complete booting).

The original fix to this just avoided adding _PAGE_NX to
an empty entry; but eventually more problems surfaced with kexec,
and EFI mapping expected to be a problem too.  So now instead
change native_set_pgd() to update shadow only if _PAGE_USER:

A few places (kernel/machine_kexec_64.c, platform/efi/efi_64.c for sure)
use set_pgd() to set up a temporary internal virtual address space, with
physical pages remapped at what Kaiser regards as userspace addresses:
Kaiser then assumes a shadow pgd follows, which it will try to corrupt.

This appears to be responsible for the recent kexec and kdump failures;
though it's unclear how those did not manifest as a problem before.
Ah, the shadow pgd will only be assumed to "follow" if the requested
pgd is on an even-numbered page: so I suppose it was going wrong 50%
of the time all along.

What we need is a flag to set_pgd(), to tell it we're dealing with
userspace.  Er, isn't that what the pgd's _PAGE_USER bit is saying?
Add a test for that.  But we cannot do the same for pgd_clear()
(which may be called to clear corrupted entries - set aside the
question of "corrupt in which pgd?" until later), so there just
rely on pgd_clear() not being called in the problematic cases -
with a WARN_ON_ONCE() which should fire half the time if it is.

But this is getting too big for an inline function: move it into
arch/x86/mm/kaiser.c (which then demands a boot/compressed mod);
and de-void and de-space native_get_shadow/normal_pgd() while here.

Also make an unnecessary change to KASLR's init_trampoline(): it was
using set_pgd() to assign a pgd-value to a global variable (not in a
pg directory page), which was rather scary given Kaiser's previous
set_pgd() implementation: not a problem now, but too scary to leave
as was, it could easily blow up if we have to change set_pgd() again.

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kaiser: merged update

Merged fixes and cleanups, rebased to 4.9.51 tree (no 5-level paging).

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KAISER: Kernel Address Isolation

This patch introduces our implementation of KAISER (Kernel Address Isolation to
have Side-channels Efficiently Removed), a kernel isolation technique to close
hardware side channels on kernel address information.

More information about the patch can be found on:

        https://github.com/IAIK/KAISER

From: Richard Fellner <richard.fellner@student.tugraz.at>
From: Daniel Gruss <daniel.gruss@iaik.tugraz.at>
Subject: [RFC, PATCH] x86_64: KAISER - do not map kernel in user mode
Date: Thu, 4 May 2017 14:26:50 +0200
Link: http://marc.info/?l=linux-kernel&m=149390087310405&w=2
Kaiser-4.10-SHA1: c4b1831d44c6144d3762ccc72f0c4e71a0c713e5

To: <linux-kernel@vger.kernel.org>
To: <kernel-hardening@lists.openwall.com>
Cc: <clementine.maurice@iaik.tugraz.at>
Cc: <moritz.lipp@iaik.tugraz.at>
Cc: Michael Schwarz <michael.schwarz@iaik.tugraz.at>
Cc: Richard Fellner <richard.fellner@student.tugraz.at>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <kirill.shutemov@linux.intel.com>
Cc: <anders.fogh@gdata-adan.de>
After several recent works [1,2,3] KASLR on x86_64 was basically
considered dead by many researchers. We have been working on an
efficient but effective fix for this problem and found that not mapping
the kernel space when running in user mode is the solution to this
problem [4] (the corresponding paper [5] will be presented at ESSoS17).

With this RFC patch we allow anybody to configure their kernel with the
flag CONFIG_KAISER to add our defense mechanism.

If there are any questions we would love to answer them.
We also appreciate any comments!

Cheers,
Daniel (+ the KAISER team from Graz University of Technology)

[1] http://www.ieee-security.org/TC/SP2013/papers/4977a191.pdf
[2] https://www.blackhat.com/docs/us-16/materials/us-16-Fogh-Using-Undocumented-CPU-Behaviour-To-See-Into-Kernel-Mode-And-Break-KASLR-In-The-Process.pdf
[3] https://www.blackhat.com/docs/us-16/materials/us-16-Jang-Breaking-Kernel-Address-Space-Layout-Randomization-KASLR-With-Intel-TSX.pdf
[4] https://github.com/IAIK/KAISER
[5] https://gruss.cc/files/kaiser.pdf

[patch based also on
https://raw.githubusercontent.com/IAIK/KAISER/master/KAISER/0001-KAISER-Kernel-Address-Isolation.patch]

Signed-off-by: Richard Fellner <richard.fellner@student.tugraz.at>
Signed-off-by: Moritz Lipp <moritz.lipp@iaik.tugraz.at>
Signed-off-by: Daniel Gruss <daniel.gruss@iaik.tugraz.at>
Signed-off-by: Michael Schwarz <michael.schwarz@iaik.tugraz.at>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/boot: Add early cmdline parsing for options with arguments

commit e505371dd83963caae1a37ead9524e8d997341be upstream.

Add a cmdline_find_option() function to look for cmdline options that
take arguments. The argument is returned in a supplied buffer and the
argument length (regardless of whether it fits in the supplied buffer)
is returned, with -1 indicating not found.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Toshimitsu Kani <toshi.kani@hpe.com>
Cc: kasan-dev@googlegroups.com
Cc: kvm@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-efi@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/36b5f97492a9745dce27682305f990fc20e5cf8a.1500319216.git.thomas.lendacky@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp_bbr: reset long-term bandwidth sampling on loss recovery undo

commit 600647d467c6d04b3954b41a6ee1795b5ae00550 upstream.

Fix BBR so that upon notification of a loss recovery undo BBR resets
long-term bandwidth sampling.

Under high reordering, reordering events can be interpreted as loss.
If the reordering and spurious loss estimates are high enough, this
can cause BBR to spuriously estimate that we are seeing loss rates
high enough to trigger long-term bandwidth estimation. To avoid that
problem, this commit resets long-term bandwidth sampling on loss
recovery undo events.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp_bbr: reset full pipe detection on loss recovery undo

commit 2f6c498e4f15d27852c04ed46d804a39137ba364 upstream.

Fix BBR so that upon notification of a loss recovery undo BBR resets
the full pipe detection (STARTUP exit) state machine.

Under high reordering, reordering events can be interpreted as loss.
If the reordering and spurious loss estimates are high enough, this
could previously cause BBR to spuriously estimate that the pipe is
full.

Since spurious loss recovery means that our overall sending will have
slowed down spuriously, this commit gives a flow more time to probe
robustly for bandwidth and decide the pipe is really full.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.74

mm/vmstat: Make NR_TLB_REMOTE_FLUSH_RECEIVED available even on UP

commit 5dd0b16cdaff9b94da06074d5888b03235c0bf17 upstream.

This fixes CONFIG_SMP=n, CONFIG_DEBUG_TLBFLUSH=y without introducing
further #ifdef soup.  Caught by a Kbuild bot randconfig build.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: ce4a4e565f52 ("x86/mm: Remove the UP asm/tlbflush.h code, always use the (formerly) SMP code")
Link: http://lkml.kernel.org/r/76da9a3cc4415996f2ad2c905b93414add322021.1496673616.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: fix tty_ldisc_receive_buf() documentation

commit e7e51dcf3b8a5f65c5653a054ad57eb2492a90d0 upstream.

The tty_ldisc_receive_buf() helper returns the number of bytes
processed so drop the bogus "not" from the kernel doc comment.

Fixes: 8d082cd300ab ("tty: Unify receive_buf() code paths")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

n_tty: fix EXTPROC vs ICANON interaction with TIOCINQ (aka FIONREAD)

commit 966031f340185eddd05affcf72b740549f056348 upstream.

We added support for EXTPROC back in 2010 in commit 26df6d13406d ("tty:
Add EXTPROC support for LINEMODE") and the intent was to allow it to
override some (all?) ICANON behavior.  Quoting from that original commit
message:

         There is a new bit in the termios local flag word, EXTPROC.
         When this bit is set, several aspects of the terminal driver
         are disabled.  Input line editing, character echo, and mapping
         of signals are all disabled.  This allows the telnetd to turn
         off these functions when in linemode, but still keep track of
         what state the user wants the terminal to be in.

but the problem turns out that "several aspects of the terminal driver
are disabled" is a bit ambiguous, and you can really confuse the n_tty
layer by setting EXTPROC and then causing some of the ICANON invariants
to no longer be maintained.

This fixes at least one such case (TIOCINQ) becoming unhappy because of
the confusion over whether ICANON really means ICANON when EXTPROC is set.

This basically makes TIOCINQ match the case of read: if EXTPROC is set,
we ignore ICANON.  Also, make sure to reset the ICANON state ie EXTPROC
changes, not just if ICANON changes.

Fixes: 26df6d13406d ("tty: Add EXTPROC support for LINEMODE")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/smpboot: Remove stale TLB flush invocations

commit 322f8b8b340c824aef891342b0f5795d15e11562 upstream.

smpboot_setup_warm_reset_vector() and smpboot_restore_warm_reset_vector()
invoke local_flush_tlb() for no obvious reason.

Digging in history revealed that the original code in the 2.1 era added
those because the code manipulated a swapper_pg_dir pagetable entry. The
pagetable manipulation was removed long ago in the 2.3 timeframe, but the
TLB flush invocations stayed around forever.

Remove them along with the pointless pr_debug()s which come from the same 2.1
change.

Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171230211829.586548655@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick()

commit 5d62c183f9e9df1deeea0906d099a94e8a43047a upstream.

The conditions in irq_exit() to invoke tick_nohz_irq_exit() which
subsequently invokes tick_nohz_stop_sched_tick() are:

  if ((idle_cpu(cpu) && !need_resched()) || tick_nohz_full_cpu(cpu))

If need_resched() is not set, but a timer softirq is pending then this is
an indication that the softirq code punted and delegated the execution to
softirqd. need_resched() is not true because the current interrupted task
takes precedence over softirqd.

Invoking tick_nohz_irq_exit() in this case can cause an endless loop of
timer interrupts because the timer wheel contains an expired timer, but
softirqs are not yet executed. So it returns an immediate expiry request,
which causes the timer to fire immediately again. Lather, rinse and
repeat....

Prevent that by adding a check for a pending timer soft interrupt to the
conditions in tick_nohz_stop_sched_tick() which avoid calling
get_next_timer_interrupt(). That keeps the tick sched timer on the tick and
prevents a repetitive programming of an already expired timer.

Reported-by: Sebastian Siewior <bigeasy@linutronix.d>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712272156050.2431@nanos
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

timers: Reinitialize per cpu bases on hotplug

commit 26456f87aca7157c057de65c9414b37f1ab881d1 upstream.

The timer wheel bases are not (re)initialized on CPU hotplug. That leaves
them with a potentially stale clk and next_expiry valuem, which can cause
trouble then the CPU is plugged.

Add a prepare callback which forwards the clock, sets next_expiry to far in
the future and reset the control flags to a known state.

Set base->must_forward_clk so the first timer which is queued will try to
forward the clock to current jiffies.

Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel")
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712272152200.2431@nanos
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

timers: Invoke timer_start_debug() where it makes sense

commit fd45bb77ad682be728d1002431d77b8c73342836 upstream.

The timer start debug function is called before the proper timer base is
set. As a consequence the trace data contains the stale CPU and flags
values.

Call the debug function after setting the new base and flags.

Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: rt@linutronix.de
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Link: https://lkml.kernel.org/r/20171222145337.792907137@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

timers: Use deferrable base independent of base::nohz_active

commit ced6d5c11d3e7b342f1a80f908e6756ebd4b8ddd upstream.

During boot and before base::nohz_active is set in the timer bases, deferrable
timers are enqueued into the standard timer base. This works correctly as
long as base::nohz_active is false.

Once it base::nohz_active is set and a timer which was enqueued before that
is accessed the lock selector code choses the lock of the deferred
base. This causes unlocked access to the standard base and in case the
timer is removed it does not clear the pending flag in the standard base
bitmap which causes get_next_timer_interrupt() to return bogus values.

To prevent that, the deferrable timers must be enqueued in the deferrable
base, even when base::nohz_active is not set. Those deferrable timers also
need to be expired unconditional.

Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel")
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: rt@linutronix.de
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/r/20171222145337.633328378@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201

commit da99706689481717998d1d48edd389f339eea979 upstream.

When plugging in a USB webcam I see the following message:
xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs
XHCI_TRUST_TX_LENGTH quirk?
handle_tx_event: 913 callbacks suppressed

All is quiet again with this patch (and I've done a fair but of soak
testing with the camera since).

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: Fix off by one in type-specific length check of BOS SSP capability

commit 07b9f12864d16c3a861aef4817eb1efccbc5d0e6 upstream.

USB 3.1 devices are not detected as 3.1 capable since 4.15-rc3 due to a
off by one in commit 81cf4a45360f ("USB: core: Add type-specific length
check of BOS descriptors")

It uses USB_DT_USB_SSP_CAP_SIZE() to get SSP capability size which takes
the zero based SSAC as argument, not the actual count of sublink speed
attributes.

USB3 spec 9.6.2.5 says "The number of Sublink Speed Attributes = SSAC + 1."

The type-specific length check patch was added to stable and needs to be
fixed there as well

Fixes: 81cf4a45360f ("USB: core: Add type-specific length check of BOS descriptors")
CC: Masakazu Mokuno <masakazu.mokuno@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: add RESET_RESUME for ELSA MicroLink 56K

commit b9096d9f15c142574ebebe8fbb137012bb9d99c2 upstream.

This modem needs this quirk to operate. It produces timeouts when
resumed without reset.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: Add device quirk for Logitech HD Pro Webcam C925e

commit 7f038d256c723dd390d2fca942919573995f4cfd upstream.

Commit e0429362ab15
("usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e")
introduced quirk to workaround an issue with some Logitech webcams.

There is one more model that has the same issue - C925e, so applying
the same quirk as well.

See aforementioned commit message for detailed explanation of the problem.

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: adding support for YUGA CLM920-NC5

commit 3920bb713038810f25770e7545b79f204685c8f2 upstream.

This patch adds support for YUGA CLM920-NC5 PID 0x9625 USB modem to option
driver.

Interface layout:
0: QCDM/DIAG
1: ADB
2: MODEM
3: AT
4: RMNET

Signed-off-by: Taiyi Wu <taiyity.wu@moxa.com>
Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add support for Telit ME910 PID 0x1101

commit 08933099e6404f588f81c2050bfec7313e06eeaf upstream.

This patch adds support for PID 0x1101 of Telit ME910.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: qcserial: add Sierra Wireless EM7565

commit 92a18a657fb2e2ffbfa0659af32cc18fd2346516 upstream.

Sierra Wireless EM7565 devices use the QCSERIAL_SWI layout for their
serial ports

T:  Bus=01 Lev=03 Prnt=29 Port=01 Cnt=02 Dev#= 31 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1199 ProdID=9091 Rev= 0.06
S:  Manufacturer=Sierra Wireless, Incorporated
S:  Product=Sierra Wireless EM7565 Qualcomm Snapdragon X16 LTE-A
S:  SerialNumber=xxxxxxxx
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=86(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

but need sendsetup = true for the NMEA port to make it work properly.

Simplify the patch compared to v1 as suggested by Bjørn Mork by taking
advantage of the fact that existing devices work with sendsetup = true
too.

Use sendsetup = true for the NMEA interface of QCSERIAL_SWI and add
DEVICE_SWI entries for the EM7565 PID 0x9091 and the EM7565 QDL PID
0x9090.

Tests with several MC73xx/MC74xx/MC77xx devices have been performed in
order to verify backward compatibility.

Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: add id for Airbus DS P8GR

commit c6a36ad383559a60a249aa6016cebf3cb8b6c485 upstream.

Add AIRBUS_DS_P8GR device IDs to ftdi_sio driver.

Signed-off-by: Max Schulze <max.schulze@posteo.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: vhci: stop printing kernel pointer addresses in messages

commit 8272d099d05f7ab2776cf56a2ab9f9443be18907 upstream.

Remove and/or change debug, info. and error messages to not print
kernel pointer addresses.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: stub: stop printing kernel pointer addresses in messages

commit 248a22044366f588d46754c54dfe29ffe4f8b4df upstream.

Remove and/or change debug, info. and error messages to not print
kernel pointer addresses.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: prevent leaking socket pointer address in messages

commit 90120d15f4c397272aaf41077960a157fc4212bf upstream.

usbip driver is leaking socket pointer address in messages. Remove
the messages that aren't useful and print sockfd in the ones that
are useful for debugging.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: fix usbip bind writing random string after command in match_busid

commit 544c4605acc5ae4afe7dd5914147947db182f2fb upstream.

usbip bind writes commands followed by random string when writing to
match_busid attribute in sysfs, caused by using full variable size
instead of string length.

Signed-off-by: Juan Zea <juan.zea@qindel.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: update takeover IPs after configuration change

[ Upstream commit 02f510f326501470348a5df341e8232c3497bbbb ]

Any modification to the takeover IP-ranges requires that we re-evaluate
which IP addresses are takeover-eligible. Otherwise we might do takeover
for some addresses when we no longer should, or vice-versa.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: lock IP table while applying takeover changes

[ Upstream commit 8a03a3692b100d84785ee7a834e9215e304c9e00 ]

Modifying the flags of an IP addr object needs to be protected against
eg. concurrent removal of the same object from the IP table.

Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: don't apply takeover changes to RXIP

[ Upstream commit b22d73d6689fd902a66c08ebe71ab2f3b351e22f ]

When takeover is switched off, current code clears the 'TAKEOVER' flag on
all IPs. But the flag is also used for RXIP addresses, and those should
not be affected by the takeover mode.
Fix the behaviour by consistenly applying takover logic to NORMAL
addresses only.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: apply takeover changes when mode is toggled

[ Upstream commit 7fbd9493f0eeae8cef58300505a9ef5c8fce6313 ]

Just as for an explicit enable/disable, toggling the takeover mode also
requires that the IP addresses get updated. Otherwise all IPs that were
added to the table before the mode-toggle, get registered with the old
settings.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Fix error flow in CREATE_QP command

[ Upstream commit dbff26e44dc3ec4de6578733b054a0114652a764 ]

In error flow, when DESTROY_QP command should be executed, the wrong
mailbox was set with data, not the one that is written to hardware,
Fix that.

Fixes: 09a7d9eca1a6 '{net,IB}/mlx5: QP/XRCD commands via mlx5 ifc'
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Prevent possible races in VXLAN control flow

[ Upstream commit 0c1cc8b2215f5122ca614b5adca60346018758c3 ]

When calling add/remove VXLAN port, a lock must be held in order to
prevent race scenarios when more than one add/remove happens at the
same time.
Fix by holding our state_lock (mutex) as done by all other parts of the
driver.
Note that the spinlock protecting the radix-tree is still needed in
order to synchronize radix-tree access from softirq context.

Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Add refcount to VXLAN structure

[ Upstream commit 23f4cc2cd9ed92570647220aca60d0197d8c1fa9 ]

A refcount mechanism must be implemented in order to prevent unwanted
scenarios such as:
- Open an IPv4 VXLAN interface
- Open an IPv6 VXLAN interface (different socket)
- Remove one of the interfaces

With current implementation, the UDP port will be removed from our VXLAN
database and turn off the offloads for the other interface, which is
still active.
The reference count mechanism will only allow UDP port removals once all
consumers are gone.

Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Fix possible deadlock of VXLAN lock

[ Upstream commit 6323514116404cc651df1b7fffa1311ddf8ce647 ]

mlx5e_vxlan_lookup_port is called both from mlx5e_add_vxlan_port (user
context) and mlx5e_features_check (softirq), but the lock acquired does
not disable bottom half and might result in deadlock. Fix it by simply
replacing spin_lock() with spin_lock_bh().
While at it, replace all unnecessary spin_lock_irq() to spin_lock_bh().

lockdep's WARNING: inconsistent lock state
[  654.028136] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[  654.028229] swapper/5/0 [HC0[0]:SC1[9]:HE1:SE0] takes:
[  654.028321]  (&(&vxlan_db->lock)->rlock){+.?.}, at: [<ffffffffa06e7f0e>] mlx5e_vxlan_lookup_port+0x1e/0x50 [mlx5_core]
[  654.028528] {SOFTIRQ-ON-W} state was registered at:
[  654.028607]   _raw_spin_lock+0x3c/0x70
[  654.028689]   mlx5e_vxlan_lookup_port+0x1e/0x50 [mlx5_core]
[  654.028794]   mlx5e_vxlan_add_port+0x2e/0x120 [mlx5_core]
[  654.028878]   process_one_work+0x1e9/0x640
[  654.028942]   worker_thread+0x4a/0x3f0
[  654.029002]   kthread+0x141/0x180
[  654.029056]   ret_from_fork+0x24/0x30
[  654.029114] irq event stamp: 579088
[  654.029174] hardirqs last  enabled at (579088): [<ffffffff818f475a>] ip6_finish_output2+0x49a/0x8c0
[  654.029309] hardirqs last disabled at (579087): [<ffffffff818f470e>] ip6_finish_output2+0x44e/0x8c0
[  654.029446] softirqs last  enabled at (579030): [<ffffffff810b3b3d>] irq_enter+0x6d/0x80
[  654.029567] softirqs last disabled at (579031): [<ffffffff810b3c05>] irq_exit+0xb5/0xc0
[  654.029684] other info that might help us debug this:
[  654.029781]  Possible unsafe locking scenario:

[  654.029868]        CPU0
[  654.029908]        ----
[  654.029947]   lock(&(&vxlan_db->lock)->rlock);
[  654.030045]   <Interrupt>
[  654.030090]     lock(&(&vxlan_db->lock)->rlock);
[  654.030162]
 *** DEADLOCK ***

Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Fix features check of IPv6 traffic

[ Upstream commit 2989ad1ec03021ee6d2193c35414f1d970a243de ]

The assumption that the next header field contains the transport
protocol is wrong for IPv6 packets with extension headers.
Instead, we should look the inner-most next header field in the buffer.
This will fix TSO offload for tunnels over IPv6 with extension headers.

Performance testing: 19.25x improvement, cool!
Measuring bandwidth of 16 threads TCP traffic over IPv6 GRE tap.
CPU: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz
NIC: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]
TSO: Enabled
Before: 4,926.24  Mbps
Now   : 94,827.91 Mbps

Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Fix rate limit packet pacing naming and struct

[ Upstream commit 37e92a9d4fe38dc3e7308913575983a6a088c8d4 ]

In mlx5_ifc, struct size was not complete, and thus driver was sending
garbage after the last defined field. Fixed it by adding reserved field
to complete the struct size.

In addition, rename all set_rate_limit to set_pp_rate_limit to be
compliant with the Firmware <-> Driver definition.

Fixes: 7486216b3a0b ("{net,IB}/mlx5: mlx5_ifc updates")
Fixes: 1466cc5b23d1 ("net/mlx5: Rate limit tables support")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: invalidate rate samples during SACK reneging

[ Upstream commit d4761754b4fb2ef8d9a1e9d121c4bec84e1fe292 ]

Mark tcp_sock during a SACK reneging event and invalidate rate samples
while marked. Such rate samples may overestimate bw by including packets
that were SACKed before reneging.

< ack 6001 win 10000 sack 7001:38001
< ack 7001 win 0 sack 8001:38001 // Reneg detected
> seq 7001:8001 // RTO, SACK cleared.
< ack 38001 win 10000

In above example the rate sample taken after the last ack will count
7001-38001 as delivered while the actual delivery rate likely could
be much lower i.e. 7001-8001.

This patch adds a new field tcp_sock.sack_reneg and marks it when we
declare SACK reneging and entering TCP_CA_Loss, and unmarks it after
the last rate sample was taken before moving back to TCP_CA_Open. This
patch also invalidates rate samples taken while tcp_sock.is_sack_reneg
is set.

Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection")
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sock: free skb in skb_complete_tx_timestamp on error

[ Upstream commit 35b99dffc3f710cafceee6c8c6ac6a98eb2cb4bf ]

skb_complete_tx_timestamp must ingest the skb it is passed. Call
kfree_skb if the skb cannot be enqueued.

Fixes: b245be1f4db1 ("net-timestamp: no-payload only sysctl")
Fixes: 9ac25fc06375 ("net: fix socket refcounting in skb_complete_tx_timestamp()")
Reported-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaround

[ Upstream commit c1a8d0a3accf64a014d605e6806ce05d1c17adf1 ]

Under some circumstances driver will perform PHY reset in
ksz9031_read_status() to fix autoneg failure case (idle error count =
0xFF). When this happens ksz9031 will not detect link status change any
more when connecting to Netgear 1G switch (link can be recovered sometimes by
restarting netdevice "ifconfig down up"). Reproduced with TI am572x board
equipped with ksz9031 PHY while connecting to Netgear 1G switch.

Fix the issue by reconfiguring autonegotiation after PHY reset in
ksz9031_read_status().

Fixes: d2fd719bcb0e ("net/phy: micrel: Add workaround for bad autoneg")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: Fix double free and memory corruption in get_net_ns_by_id()

[ Upstream commit 21b5944350052d2583e82dd59b19a9ba94a007f0 ]

(I can trivially verify that that idr_remove in cleanup_net happens
 after the network namespace count has dropped to zero --EWB)

Function get_net_ns_by_id() does not check for net::count
after it has found a peer in netns_ids idr.

It may dereference a peer, after its count has already been
finaly decremented. This leads to double free and memory
corruption:

put_net(peer)                                   rtnl_lock()
atomic_dec_and_test(&peer->count) [count=0]     ...
__put_net(peer)                                 get_net_ns_by_id(net, id)
  spin_lock(&cleanup_list_lock)
  list_add(&net->cleanup_list, &cleanup_list)
  spin_unlock(&cleanup_list_lock)
queue_work()                                      peer = idr_find(&net->netns_ids, id)
  |                                               get_net(peer) [count=1]
  |                                               ...
  |                                               (use after final put)
  v                                               ...
  cleanup_net()                                   ...
    spin_lock(&cleanup_list_lock)                 ...
    list_replace_init(&cleanup_list, ..)          ...
    spin_unlock(&cleanup_list_lock)               ...
    ...                                           ...
    ...                                           put_net(peer)
    ...                                             atomic_dec_and_test(&peer->count) [count=0]
    ...                                               spin_lock(&cleanup_list_lock)
    ...                                               list_add(&net->cleanup_list, &cleanup_list)
    ...                                               spin_unlock(&cleanup_list_lock)
    ...                                             queue_work()
    ...                                           rtnl_unlock()
    rtnl_lock()                                   ...
    for_each_net(tmp) {                           ...
      id = __peernet2id(tmp, peer)                ...
      spin_lock_irq(&tmp->nsid_lock)              ...
      idr_remove(&tmp->netns_ids, id)             ...
      ...                                         ...
      net_drop_ns()                               ...
net_free(peer)                            ...
    }                                             ...
  |
  v
  cleanup_net()
    ...
    (Second free of peer)

Also, put_net() on the right cpu may reorder with left's cpu
list_replace_init(&cleanup_list, ..), and then cleanup_list
will be corrupted.

Since cleanup_net() is executed in worker thread, while
put_net(peer) can happen everywhere, there should be
enough time for concurrent get_net_ns_by_id() to pick
the peer up, and the race does not seem to be unlikely.
The patch fixes the problem in standard way.

(Also, there is possible problem in peernet2id_alloc(), which requires
check for net::count under nsid_lock and maybe_get_net(peer), but
in current stable kernel it's used under rtnl_lock() and it has to be
safe. Openswitch begun to use peernet2id_alloc(), and possibly it should
be fixed too. While this is not in stable kernel yet, so I'll send
a separate message to netdev@ later).

Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Fixes: 0c7aecd4bde4 "netns: add rtnl cmd to add and get peer netns ids"
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fec: Allow reception of frames bigger than 1522 bytes

[ Upstream commit fbbeefdd21049fcf9437c809da3828b210577f36 ]

The FEC Receive Control Register has a 14 bit field indicating the
longest frame that may be received. It is being set to 1522. Frames
longer than this are discarded, but counted as being in error.

When using DSA, frames from the switch has an additional header,
either 4 or 8 bytes if a Marvell switch is used. Thus a full MTU frame
of 1522 bytes received by the switch on a port becomes 1530 bytes when
passed to the host via the FEC interface.

Change the maximum receive size to 2048 - 64, where 64 is the maximum
rx_alignment applied on the receive buffer for AVB capable FEC
cores. Use this value also for the maximum receive buffer size. The
driver is already allocating a receive SKB of 2048 bytes, so this
change should not have any significant effects.

Tested on imx51, imx6, vf610.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bridge: fix early call to br_stp_change_bridge_id and plug newlink leaks

[ Upstream commit 84aeb437ab98a2bce3d4b2111c79723aedfceb33 ]

The early call to br_stp_change_bridge_id in bridge's newlink can cause
a memory leak if an error occurs during the newlink because the fdb
entries are not cleaned up if a different lladdr was specified, also
another minor issue is that it generates fdb notifications with
ifindex = 0. Another unrelated memory leak is the bridge sysfs entries
which get added on NETDEV_REGISTER event, but are not cleaned up in the
newlink error path. To remove this special case the call to
br_stp_change_bridge_id is done after netdev register and we cleanup the
bridge on changelink error via br_dev_delete to plug all leaks.

This patch makes netlink bridge destruction on newlink error the same as
dellink and ioctl del which is necessary since at that point we have a
fully initialized bridge device.

To reproduce the issue:
$ ip l add br0 address 00:11:22:33:44:55 type bridge group_fwd_mask 1
RTNETLINK answers: Invalid argument

$ rmmod bridge
[ 1822.142525] =============================================================================
[ 1822.143640] BUG bridge_fdb_cache (Tainted: G           O    ): Objects remaining in bridge_fdb_cache on __kmem_cache_shutdown()
[ 1822.144821] -----------------------------------------------------------------------------

[ 1822.145990] Disabling lock debugging due to kernel taint
[ 1822.146732] INFO: Slab 0x0000000092a844b2 objects=32 used=2 fp=0x00000000fef011b0 flags=0x1ffff8000000100
[ 1822.147700] CPU: 2 PID: 13584 Comm: rmmod Tainted: G    B      O     4.15.0-rc2+ #87
[ 1822.148578] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 1822.150008] Call Trace:
[ 1822.150510]  dump_stack+0x78/0xa9
[ 1822.151156]  slab_err+0xb1/0xd3
[ 1822.151834]  ? __kmalloc+0x1bb/0x1ce
[ 1822.152546]  __kmem_cache_shutdown+0x151/0x28b
[ 1822.153395]  shutdown_cache+0x13/0x144
[ 1822.154126]  kmem_cache_destroy+0x1c0/0x1fb
[ 1822.154669]  SyS_delete_module+0x194/0x244
[ 1822.155199]  ? trace_hardirqs_on_thunk+0x1a/0x1c
[ 1822.155773]  entry_SYSCALL_64_fastpath+0x23/0x9a
[ 1822.156343] RIP: 0033:0x7f929bd38b17
[ 1822.156859] RSP: 002b:00007ffd160e9a98 EFLAGS: 00000202 ORIG_RAX: 00000000000000b0
[ 1822.157728] RAX: ffffffffffffffda RBX: 00005578316ba090 RCX: 00007f929bd38b17
[ 1822.158422] RDX: 00007f929bd9ec60 RSI: 0000000000000800 RDI: 00005578316ba0f0
[ 1822.159114] RBP: 0000000000000003 R08: 00007f929bff5f20 R09: 00007ffd160e8a11
[ 1822.159808] R10: 00007ffd160e9860 R11: 0000000000000202 R12: 00007ffd160e8a80
[ 1822.160513] R13: 0000000000000000 R14: 0000000000000000 R15: 00005578316ba090
[ 1822.161278] INFO: Object 0x000000007645de29 @offset=0
[ 1822.161666] INFO: Object 0x00000000d5df2ab5 @offset=128

Fixes: 30313a3d5794 ("bridge: Handle IFLA_ADDRESS correctly when creating bridge device")
Fixes: 5b8d5429daa0 ("bridge: netlink: register netdevice before executing changelink")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: Fix use-after-free when flushing FIB tables

[ Upstream commit b4681c2829e24943aadd1a7bb3a30d41d0a20050 ]

Since commit 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse") the
local table uses the same trie allocated for the main table when custom
rules are not in use.

When a net namespace is dismantled, the main table is flushed and freed
(via an RCU callback) before the local table. In case the callback is
invoked before the local table is iterated, a use-after-free can occur.

Fix this by iterating over the FIB tables in reverse order, so that the
main table is always freed after the local table.

v3: Reworded comment according to Alex's suggestion.
v2: Add a comment to make the fix more explicit per Dave's and Alex's
feedback.

Fixes: 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

adding missing rcu_read_unlock in ipxip6_rcv

[ Upstream commit 74c4b656c3d92ec4c824ea1a4afd726b7b6568c8 ]

commit 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels")
introduced new exit point in  ipxip6_rcv. however rcu_read_unlock is
missing there. this diff is fixing this

v1->v2:
 instead of doing rcu_read_unlock in place, we are going to "drop"
 section (to prevent skb leakage)

Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels")
Signed-off-by: Nikita V. Shirokov <tehnerd@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: Replace use of sockets_allocated with specified macro.

[ Upstream commit 8cb38a602478e9f806571f6920b0a3298aabf042 ]

The patch(180d8cd942ce) replaces all uses of struct sock fields'
memory_pressure, memory_allocated, sockets_allocated, and sysctl_mem
to accessor macros. But the sockets_allocated field of sctp sock is
not replaced at all. Then replace it now for unifying the code.

Fixes: 180d8cd942ce ("foundations of per-cgroup memory pressure controlling.")
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: Tonghao Zhang <zhangtonghao@didichuxing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mvmdio: disable/unprepare clocks in EPROBE_DEFER case

[ Upstream commit 589bf32f09852041fbd3b7ce1a9e703f95c230ba ]

add appropriate calls to clk_disable_unprepare() by jumping to out_mdio
in case orion_mdio_probe() returns -EPROBE_DEFER.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 3d604da1e954 ("net: mvmdio: get and enable optional clock")
Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipv4: fix for a race condition in raw_sendmsg

[ Upstream commit 8f659a03a0ba9289b9aeb9b4470e6fb263d6f483 ]

inet->hdrincl is racy, and could lead to uninitialized stack pointer
usage, so its value should be read only once.

Fixes: c008ba5bdc9f ("ipv4: Avoid reading user iov twice after raw_probe_proto_opt")
Signed-off-by: Mohamed Ghannam <simo.ghannam@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tg3: Fix rx hang on MTU change with 5717/5719

[ Upstream commit 748a240c589824e9121befb1cba5341c319885bc ]

This fixes a hang issue seen when changing the MTU size from 1500 MTU
to 9000 MTU on both 5717 and 5719 chips. In discussion with Broadcom,
they've indicated that these chipsets have the same phy as the 57766
chipset, so the same workarounds apply. This has been tested by IBM
on both Power 8 and Power 9 systems as well as by Broadcom on x86
hardware and has been confirmed to resolve the hang issue.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp md5sig: Use skb's saddr when replying to an incoming segment

[ Upstream commit 30791ac41927ebd3e75486f9504b6d2280463bf0 ]

The MD5-key that belongs to a connection is identified by the peer's
IP-address. When we are in tcp_v4(6)_reqsk_send_ack(), we are replying
to an incoming segment from tcp_check_req() that failed the seq-number
checks.

Thus, to find the correct key, we need to use the skb's saddr and not
the daddr.

This bug seems to have been there since quite a while, but probably got
unnoticed because the consequences are not catastrophic. We will call
tcp_v4_reqsk_send_ack only to send a challenge-ACK back to the peer,
thus the connection doesn't really fail.

Fixes: 9501f9722922 ("tcp md5sig: Let the caller pass appropriate key for tcp_v{4,6}_do_calc_md5_hash().")
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp_bbr: record "full bw reached" decision in new full_bw_reached bit

[ Upstream commit c589e69b508d29ed8e644dfecda453f71c02ec27 ]

This commit records the "full bw reached" decision in a new
full_bw_reached bit. This is a pure refactor that does not change the
current behavior, but enables subsequent fixes and improvements.

In particular, this enables simple and clean fixes because the full_bw
and full_bw_cnt can be unconditionally zeroed without worrying about
forgetting that we estimated we filled the pipe in Startup. And it
enables future improvements because multiple code paths can be used
for estimating that we filled the pipe in Startup; any new code paths
only need to set this bit when they think the pipe is full.

Note that this fix intentionally reduces the width of the full_bw_cnt
counter, since we have never used the most significant bit.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDS: Check cmsg_len before dereferencing CMSG_DATA

[ Upstream commit 14e138a86f6347c6199f610576d2e11c03bec5f0 ]

RDS currently doesn't check if the length of the control message is
large enough to hold the required data, before dereferencing the control
message data. This results in following crash:

BUG: KASAN: stack-out-of-bounds in rds_rdma_bytes net/rds/send.c:1013
[inline]
BUG: KASAN: stack-out-of-bounds in rds_sendmsg+0x1f02/0x1f90
net/rds/send.c:1066
Read of size 8 at addr ffff8801c928fb70 by task syzkaller455006/3157

CPU: 0 PID: 3157 Comm: syzkaller455006 Not tainted 4.15.0-rc3+ #161
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x194/0x257 lib/dump_stack.c:53
 print_address_description+0x73/0x250 mm/kasan/report.c:252
 kasan_report_error mm/kasan/report.c:351 [inline]
 kasan_report+0x25b/0x340 mm/kasan/report.c:409
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:430
 rds_rdma_bytes net/rds/send.c:1013 [inline]
 rds_sendmsg+0x1f02/0x1f90 net/rds/send.c:1066
 sock_sendmsg_nosec net/socket.c:628 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:638
 ___sys_sendmsg+0x320/0x8b0 net/socket.c:2018
 __sys_sendmmsg+0x1ee/0x620 net/socket.c:2108
 SYSC_sendmmsg net/socket.c:2139 [inline]
 SyS_sendmmsg+0x35/0x60 net/socket.c:2134
 entry_SYSCALL_64_fastpath+0x1f/0x96
RIP: 0033:0x43fe49
RSP: 002b:00007fffbe244ad8 EFLAGS: 00000217 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fe49
RDX: 0000000000000001 RSI: 000000002020c000 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000217 R12: 00000000004017b0
R13: 0000000000401840 R14: 0000000000000000 R15: 0000000000000000

To fix this, we verify that the cmsg_len is large enough to hold the
data to be read, before proceeding further.

Reported-by: syzbot <syzkaller-bugs@googlegroups.com>
Signed-off-by: Avinash Repaka <avinash.repaka@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ptr_ring: add barriers

[ Upstream commit a8ceb5dbfde1092b466936bca0ff3be127ecf38e ]

Users of ptr_ring expect that it's safe to give the
data structure a pointer and have it be available
to consumers, but that actually requires an smb_wmb
or a stronger barrier.

In absence of such barriers and on architectures that reorder writes,
consumer might read an un=initialized value from an skb pointer stored
in the skb array.  This was observed causing crashes.

To fix, add memory barriers.  The barrier we use is a wmb, the
assumption being that producers do not need to read the value so we do
not need to order these reads.

Reported-by: George Cherian <george.cherian@cavium.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: reevalulate autoflowlabel setting after sysctl setting

[ Upstream commit 513674b5a2c9c7a67501506419da5c3c77ac6f08 ]

sysctl.ip6.auto_flowlabels is default 1. In our hosts, we set it to 2.
If sockopt doesn't set autoflowlabel, outcome packets from the hosts are
supposed to not include flowlabel. This is true for normal packet, but
not for reset packet.

The reason is ipv6_pinfo.autoflowlabel is set in sock creation. Later if
we change sysctl.ip6.auto_flowlabels, the ipv6_pinfo.autoflowlabel isn't
changed, so the sock will keep the old behavior in terms of auto
flowlabel. Reset packet is suffering from this problem, because reset
packet is sent from a special control socket, which is created at boot
time. Since sysctl.ipv6.auto_flowlabels is 1 by default, the control
socket will always have its ipv6_pinfo.autoflowlabel set, even after
user set sysctl.ipv6.auto_flowlabels to 1, so reset packset will always
have flowlabel. Normal sock created before sysctl setting suffers from
the same issue. We can't even turn off autoflowlabel unless we kill all
socks in the hosts.

To fix this, if IPV6_AUTOFLOWLABEL sockopt is used, we use the
autoflowlabel setting from user, otherwise we always call
ip6_default_np_autolabel() which has the new settings of sysctl.

Note, this changes behavior a little bit. Before commit 42240901f7c4
(ipv6: Implement different admin modes for automatic flow labels), the
autoflowlabel behavior of a sock isn't sticky, eg, if sysctl changes,
existing connection will change autoflowlabel behavior. After that
commit, autoflowlabel behavior is sticky in the whole life of the sock.
With this patch, the behavior isn't sticky again.

Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Tom Herbert <tom@quantonium.net>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qmi_wwan: add Sierra EM7565 1199:9091

[ Upstream commit aceef61ee56898cfa7b6960fb60b9326c3860441 ]

Sierra Wireless EM7565 is an Qualcomm MDM9x50 based M.2 modem.
The USB id is added to qmi_wwan.c to allow QMI communication
with the EM7565.

Signed-off-by: Sebastian Sjoholm <ssjoholm@mac.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlink: Add netns check on taps

[ Upstream commit 93c647643b48f0131f02e45da3bd367d80443291 ]

Currently, a nlmon link inside a child namespace can observe systemwide
netlink activity.  Filter the traffic so that nlmon can only sniff
netlink messages from its own netns.

Test case:

    vpnns -- bash -c "ip link add nlmon0 type nlmon; \
                      ip link set nlmon0 up; \
                      tcpdump -i nlmon0 -q -w /tmp/nlmon.pcap -U" &
    sudo ip xfrm state add src 10.1.1.1 dst 10.1.1.2 proto esp \
        spi 0x1 mode transport \
        auth sha1 0x6162633132330000000000000000000000000000 \
        enc aes 0x00000000000000000000000000000000
    grep --binary abc123 /tmp/nlmon.pcap

Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: igmp: Use correct source address on IGMPv3 reports

[ Upstream commit a46182b00290839fa3fa159d54fd3237bd8669f0 ]

Closing a multicast socket after the final IPv4 address is deleted
from an interface can generate a membership report that uses the
source IP from a different interface.  The following test script, run
from an isolated netns, reproduces the issue:

    #!/bin/bash

    ip link add dummy0 type dummy
    ip link add dummy1 type dummy
    ip link set dummy0 up
    ip link set dummy1 up
    ip addr add 10.1.1.1/24 dev dummy0
    ip addr add 192.168.99.99/24 dev dummy1

    tcpdump -U -i dummy0 &
    socat EXEC:"sleep 2" \
        UDP4-DATAGRAM:239.101.1.68:8889,ip-add-membership=239.0.1.68:10.1.1.1 &

    sleep 1
    ip addr del 10.1.1.1/24 dev dummy0
    sleep 5
    kill %tcpdump

RFC 3376 specifies that the report must be sent with a valid IP source
address from the destination subnet, or from address 0.0.0.0.  Add an
extra check to make sure this is the case.

Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fec: unmap the xmit buffer that are not transferred by DMA

[ Upstream commit 178e5f57a8d8f8fc5799a624b96fc31ef9a29ffa ]

The enet IP only support 32 bit, it will use swiotlb buffer to do dma
mapping when xmit buffer DMA memory address is bigger than 4G in i.MX
platform. After stress suspend/resume test, it will print out:

log:
[12826.352864] fec 5b040000.ethernet: swiotlb buffer is full (sz: 191 bytes)
[12826.359676] DMA: Out of SW-IOMMU space for 191 bytes at device 5b040000.ethernet
[12826.367110] fec 5b040000.ethernet eth0: Tx DMA memory map failed

The issue is that the ready xmit buffers that are dma mapped but DMA still
don't copy them into fifo, once MAC restart, these DMA buffers are not unmapped.
So it should check the dma mapping buffer and unmap them.

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: mcast: better catch silly mtu values

[ Upstream commit b9b312a7a451e9c098921856e7cfbc201120e1a7 ]

syzkaller reported crashes in IPv6 stack [1]

Xin Long found that lo MTU was set to silly values.

IPv6 stack reacts to changes to small MTU, by disabling itself under
RTNL.

But there is a window where threads not using RTNL can see a wrong
device mtu. This can lead to surprises, in mld code where it is assumed
the mtu is suitable.

Fix this by reading device mtu once and checking IPv6 minimal MTU.

[1]
 skbuff: skb_over_panic: text:0000000010b86b8d len:196 put:20
 head:000000003b477e60 data:000000000e85441e tail:0xd4 end:0xc0 dev:lo
 ------------[ cut here ]------------
 kernel BUG at net/core/skbuff.c:104!
 invalid opcode: 0000 [#1] SMP KASAN
 Dumping ftrace buffer:
    (ftrace buffer empty)
 Modules linked in:
 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc2-mm1+ #39
 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
 Google 01/01/2011
 RIP: 0010:skb_panic+0x15c/0x1f0 net/core/skbuff.c:100
 RSP: 0018:ffff8801db307508 EFLAGS: 00010286
 RAX: 0000000000000082 RBX: ffff8801c517e840 RCX: 0000000000000000
 RDX: 0000000000000082 RSI: 1ffff1003b660e61 RDI: ffffed003b660e95
 RBP: ffff8801db307570 R08: 1ffff1003b660e23 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff85bd4020
 R13: ffffffff84754ed2 R14: 0000000000000014 R15: ffff8801c4e26540
 FS:  0000000000000000(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000463610 CR3: 00000001c6698000 CR4: 00000000001406e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <IRQ>
  skb_over_panic net/core/skbuff.c:109 [inline]
  skb_put+0x181/0x1c0 net/core/skbuff.c:1694
  add_grhead.isra.24+0x42/0x3b0 net/ipv6/mcast.c:1695
  add_grec+0xa55/0x1060 net/ipv6/mcast.c:1817
  mld_send_cr net/ipv6/mcast.c:1903 [inline]
  mld_ifc_timer_expire+0x4d2/0x770 net/ipv6/mcast.c:2448
  call_timer_fn+0x23b/0x840 kernel/time/timer.c:1320
  expire_timers kernel/time/timer.c:1357 [inline]
  __run_timers+0x7e1/0xb60 kernel/time/timer.c:1660
  run_timer_softirq+0x4c/0xb0 kernel/time/timer.c:1686
  __do_softirq+0x29d/0xbb2 kernel/softirq.c:285
  invoke_softirq kernel/softirq.c:365 [inline]
  irq_exit+0x1d3/0x210 kernel/softirq.c:405
  exiting_irq arch/x86/include/asm/apic.h:540 [inline]
  smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052
  apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:920

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: igmp: guard against silly MTU values

[ Upstream commit b5476022bbada3764609368f03329ca287528dc8 ]

IPv4 stack reacts to changes to small MTU, by disabling itself under
RTNL.

But there is a window where threads not using RTNL can see a wrong
device mtu. This can lead to surprises, in igmp code where it is
assumed the mtu is suitable.

Fix this by reading device mtu once and checking IPv4 minimal MTU.

This patch adds missing IPV4_MIN_MTU define, to not abuse
ETH_MIN_MTU anymore.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: add '-fno-stack-check' to kernel build options

commit 3ce120b16cc548472f80cf8644f90eda958cf1b6 upstream.

It appears that hardened gentoo enables "-fstack-check" by default for
gcc.

That doesn't work _at_all_ for the kernel, because the kernel stack
doesn't act like a user stack at all: it's much smaller, and it doesn't
auto-expand on use.  So the extra "probe one page below the stack" code
generated by -fstack-check just breaks the kernel in horrible ways,
causing infinite double faults etc.

[ I have to say, that the particular code gcc generates looks very
  stupid even for user space where it works, but that's a separate
  issue.  ]

Reported-and-tested-by: Alexander Tsoy <alexander@tsoy.me>
Reported-and-tested-by: Toralf Förster <toralf.foerster@gmx.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm/64: Fix reboot interaction with CR4.PCIDE

commit 924c6b900cfdf376b07bccfd80e62b21914f8a5a upstream.

Trying to reboot via real mode fails with PCID on: long mode cannot
be exited while CR4.PCIDE is set.  (No, I have no idea why, but the
SDM and actual CPUs are in agreement here.)  The result is a GPF and
a hang instead of a reboot.

I didn't catch this in testing because neither my computer nor my VM
reboots this way.  I can trigger it with reboot=bios, though.

Fixes: 660da7c9228f ("x86/mm: Enable CR4.PCIDE on supported systems")
Reported-and-tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/f1e7d965998018450a7a70c2823873686a8b21c0.1507524746.git.luto@kernel.org
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Enable CR4.PCIDE on supported systems

commit 660da7c9228f685b2ebe664f9fd69aaddcc420b5 upstream.

We can use PCID if the CPU has PCID and PGE and we're not on Xen.

By itself, this has no effect. A followup patch will start using PCID.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Nadav Amit <nadav.amit@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/6327ecd907b32f79d5aa0d466f04503bbec5df88.1498751203.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Add the 'nopcid' boot option to turn off PCID

commit 0790c9aad84901ca1bdc14746175549c8b5da215 upstream.

The parameter is only present on x86_64 systems to save a few bytes,
as PCID is always disabled on x86_32.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Nadav Amit <nadav.amit@gmail.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/8bbb2e65bcd249a5f18bfb8128b4689f08ac2b60.1498751203.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Disable PCID on 32-bit kernels

commit cba4671af7550e008f7a7835f06df0763825bf3e upstream.

32-bit kernels on new hardware will see PCID in CPUID, but PCID can
only be used in 64-bit mode.  Rather than making all PCID code
conditional, just disable the feature on 32-bit builds.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Nadav Amit <nadav.amit@gmail.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/2e391769192a4d31b808410c383c6bf0734bc6ea.1498751203.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Remove the UP asm/tlbflush.h code, always use the (formerly) SMP code

commit ce4a4e565f5264909a18c733b864c3f74467f69e upstream.

The UP asm/tlbflush.h generates somewhat nicer code than the SMP version.
Aside from that, it's fallen quite a bit behind the SMP code:

 - flush_tlb_mm_range() didn't flush individual pages if the range
   was small.

 - The lazy TLB code was much weaker.  This usually wouldn't matter,
   but, if a kernel thread flushed its lazy "active_mm" more than
   once (due to reclaim or similar), it wouldn't be unlazied and
   would instead pointlessly flush repeatedly.

 - Tracepoints were missing.

Aside from that, simply having the UP code around was a maintanence
burden, since it means that any change to the TLB flush code had to
make sure not to break it.

Simplify everything by deleting the UP code.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Reimplement flush_tlb_page() using flush_tlb_mm_range()

commit ca6c99c0794875c6d1db6e22f246699691ab7e6b upstream.

flush_tlb_page() was very similar to flush_tlb_mm_range() except that
it had a couple of issues:

 - It was missing an smp_mb() in the case where
   current->active_mm != mm.  (This is a longstanding bug reported by Nadav Amit)

 - It was missing tracepoints and vm counter updates.

The only reason that I can see for keeping it at as a separate
function is that it could avoid a few branches that
flush_tlb_mm_range() needs to decide to flush just one page.  This
hardly seems worthwhile.  If we decide we want to get rid of those
branches again, a better way would be to introduce an
__flush_tlb_mm_range() helper and make both flush_tlb_page() and
flush_tlb_mm_range() use it.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/3cc3847cf888d8907577569b8bac3f01992ef8f9.1495492063.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Make flush_tlb_mm_range() more predictable

commit ce27374fabf553153c3f53efcaa9bfab9216bd8c upstream.

I'm about to rewrite the function almost completely, but first I
want to get a functional change out of the way.  Currently, if
flush_tlb_mm_range() does not flush the local TLB at all, it will
never do individual page flushes on remote CPUs.  This seems to be
an accident, and preserving it will be awkward.  Let's change it
first so that any regressions in the rewrite will be easier to
bisect and so that the rewrite can attempt to change no visible
behavior at all.

The fix is simple: we can simply avoid short-circuiting the
calculation of base_pages_to_flush.

As a side effect, this also eliminates a potential corner case: if
tlb_single_page_flush_ceiling == TLB_FLUSH_ALL, flush_tlb_mm_range()
could have ended up flushing the entire address space one page at a
time.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/4b29b771d9975aad7154c314534fec235618175a.1492844372.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Remove flush_tlb() and flush_tlb_current_task()

commit 29961b59a51f8c6838a26a45e871a7ed6771809b upstream.

I was trying to figure out what how flush_tlb_current_task() would
possibly work correctly if current->mm != current->active_mm, but I
realized I could spare myself the effort: it has no callers except
the unused flush_tlb() macro.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/e52d64c11690f85e9f1d69d7b48cc2269cd2e94b.1492844372.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/vm86/32: Switch to flush_tlb_mm_range() in mark_screen_rdonly()

commit 9ccee2373f0658f234727700e619df097ba57023 upstream.

mark_screen_rdonly() is the last remaining caller of flush_tlb().
flush_tlb_mm_range() is potentially faster and isn't obsolete.

Compile-tested only because I don't know whether software that uses
this mechanism even exists.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/791a644076fc3577ba7f7b7cafd643cc089baa7d.1492844372.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - fix headset mic detection issue on a Dell machine

commit 285d5ddcffafa5d5e68c586f4c9eaa8b24a2897d upstream.

It has the codec alc256, and add its pin definition to pin quirk
table to let it apply ALC255_FIXUP_DELL1_MIC_NO_PRESENCE.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Drop useless WARN_ON()

commit a36c2638380c0a4676647a1f553b70b20d3ebce1 upstream.

Since the commit 97cc2ed27e5a ("ALSA: hda - Fix yet another i915
pointer leftover in error path") cleared hdac_acomp pointer, the
WARN_ON() non-NULL check in snd_hdac_i915_register_notifier() may give
a false-positive warning, as the function gets called no matter
whether the component is registered or not.  For fixing it, let's get
rid of the spurious WARN_ON().

Fixes: 97cc2ed27e5a ("ALSA: hda - Fix yet another i915 pointer leftover in error path")
Reported-by: Kouta Okamoto <kouta.okamoto@toshiba.co.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: tlv320aic31xx: Fix GPIO1 register definition

commit 737e0b7b67bdfe24090fab2852044bb283282fc5 upstream.

GPIO1 control register is number 51, fix this here.

Fixes: bafcbfe429eb ("ASoC: tlv320aic31xx: Make the register values human readable")
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: twl4030: fix child-node lookup

commit 15f8c5f2415bfac73f33a14bcd83422bcbfb5298 upstream.

Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at the parent rather than just matching
on its children.

To make things worse, the parent codec node was also prematurely freed,
while the child node was leaked.

Fixes: 2d6d649a2e0f ("ASoC: twl4030: Support for DT booted kernel")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: fsl_ssi: AC'97 ops need regmap, clock and cleaning up on failure

commit 695b78b548d8a26288f041e907ff17758df9e1d5 upstream.

AC'97 ops (register read / write) need SSI regmap and clock, so they have
to be set after them.

We also need to set these ops back to NULL if we fail the probe.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: da7218: fix fix child-node lookup

commit bc6476d6c1edcb9b97621b5131bd169aa81f27db upstream.

Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at the parent rather than just matching
on its children.

To make things worse, the parent codec node was also prematurely freed.

Fixes: 4d50934abd22 ("ASoC: da7218: Add da7218 codec driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm_adsp: Fix validation of firmware and coeff lengths

commit 50dd2ea8ef67a1617e0c0658bcbec4b9fb03b936 upstream.

The checks for whether another region/block header could be present
are subtracting the size from the current offset.  Obviously we should
instead subtract the offset from the size.

The checks for whether the region/block data fit in the file are
adding the data size to the current offset and header size, without
checking for integer overflow.  Rearrange these so that overflow is
impossible.

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iw_cxgb4: Only validate the MSN for successful completions

commit f55688c45442bc863f40ad678c638785b26cdce6 upstream.

If the RECV CQE is in error, ignore the MSN check.  This was causing
recvs that were flushed into the sw cq to be completed with the wrong
status (BAD_MSN instead of FLUSHED).

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ring-buffer: Mask out the info bits when returning buffer page length

commit 45d8b80c2ac5d21cd1e2954431fb676bc2b1e099 upstream.

Two info bits were added to the "commit" part of the ring buffer data page
when returned to be consumed. This was to inform the user space readers that
events have been missed, and that the count may be stored at the end of the
page.

What wasn't handled, was the splice code that actually called a function to
return the length of the data in order to zero out the rest of the page
before sending it up to user space. These data bits were returned with the
length making the value negative, and that negative value was not checked.
It was compared to PAGE_SIZE, and only used if the size was less than
PAGE_SIZE. Luckily PAGE_SIZE is unsigned long which made the compare an
unsigned compare, meaning the negative size value did not end up causing a
large portion of memory to be randomly zeroed out.

Fixes: 66a8cb95ed040 ("ring-buffer: Add place holder recording of dropped events")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix crash when it fails to alloc ring buffer

commit 24f2aaf952ee0b59f31c3a18b8b36c9e3d3c2cf5 upstream.

Double free of the ring buffer happens when it fails to alloc new
ring buffer instance for max_buffer if TRACER_MAX_TRACE is configured.
The root cause is that the pointer is not set to NULL after the buffer
is freed in allocate_trace_buffers(), and the freeing of the ring
buffer is invoked again later if the pointer is not equal to Null,
as:

instance_mkdir()
    |-allocate_trace_buffers()
        |-allocate_trace_buffer(tr, &tr->trace_buffer...)
|-allocate_trace_buffer(tr, &tr->max_buffer...)

          // allocate fail(-ENOMEM),first free
          // and the buffer pointer is not set to null
        |-ring_buffer_free(tr->trace_buffer.buffer)

       // out_free_tr
    |-free_trace_buffers()
        |-free_trace_buffer(&tr->trace_buffer);

      //if trace_buffer is not null, free again
    |-ring_buffer_free(buf->buffer)
                |-rb_free_cpu_buffer(buffer->buffers[cpu])
                    // ring_buffer_per_cpu is null, and
                    // crash in ring_buffer_per_cpu->pages

Link: http://lkml.kernel.org/r/20171226071253.8968-1-chunyan.zhang@spreadtrum.com
Fixes: 737223fbca3b1 ("tracing: Consolidate buffer allocation code")
Signed-off-by: Jing Xia <jing.xia@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix possible double free on failure of allocating trace buffer

commit 4397f04575c44e1440ec2e49b6302785c95fd2f8 upstream.

Jing Xia and Chunyan Zhang reported that on failing to allocate part of the
tracing buffer, memory is freed, but the pointers that point to them are not
initialized back to NULL, and later paths may try to free the freed memory
again. Jing and Chunyan fixed one of the locations that does this, but
missed a spot.

Link: http://lkml.kernel.org/r/20171226071253.8968-1-chunyan.zhang@spreadtrum.com
Fixes: 737223fbca3b1 ("tracing: Consolidate buffer allocation code")
Reported-by: Jing Xia <jing.xia@spreadtrum.com>
Reported-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Remove extra zeroing out of the ring buffer page

commit 6b7e633fe9c24682df550e5311f47fb524701586 upstream.

The ring_buffer_read_page() takes care of zeroing out any extra data in the
page that it returns. There's no need to zero it out again from the
consumer. It was removed from one consumer of this function, but
read_buffers_splice_read() did not remove it, and worse, it contained a
nasty bug because of it.

Fixes: 2711ca237a084 ("ring-buffer: Move zeroing out excess in page to ring buffer code")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sync objtool's copy of x86-opcode-map.txt

When building objtool, we get the warning:
warning: objtool: x86 instruction decoder differs from kernel

That's due to commit 2816c0455cea088f07a210f8a00701a82a78aa9c which was
commit 12a78d43de767eaf8fb272facb7a7b6f2dc6a9df upstream that modified
arch/x86/lib/x86-opcode-map.txt without also updating the objtool copy.
The objtool copy was updated in a much larger patch upstream, but we
don't need all of that here, so just update the single file.

If this gets too annoying, I'll just end up doing what we did for 4.14
and backport the whole series to keep this from happening again, but as
this seems to be rare in the 4.9-stable series, this single patch should
be fine.

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.73

bpf/verifier: Fix states_equal() comparison of pointer and UNKNOWN

An UNKNOWN_VALUE is not supposed to be derived from a pointer, unless
pointer leaks are allowed.  Therefore, states_equal() must not treat
a state with a pointer in a register as "equal" to a state with an
UNKNOWN_VALUE in that register.

This was fixed differently upstream, but the code around here was
largely rewritten in 4.14 by commit f1174f77b50c "bpf/verifier: rework
value tracking".  The bug can be detected by the bpf/verifier sub-test
"pointer/scalar confusion in state equality check (way 1)".

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Edward Cree <ecree@solarflare.com>
Cc: Jann Horn <jannh@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>

net: mvneta: eliminate wrong call to handle rx descriptor error

commit 2eecb2e04abb62ef8ea7b43e1a46bdb5b99d1bf8 upstream.

There are few reasons in mvneta_rx_swbm() function when received packet
is dropped. mvneta_rx_error() should be called only if error bit [16]
is set in rx descriptor.

[gregory.clement@free-electrons.com: add fixes tag]
Fixes: dc35a10f68d3 ("net: mvneta: bm: add support for hardware buffer management")
Signed-off-by: Yelena Krivosheev <yelena@marvell.com>
Tested-by: Dmitri Epshtein <dima@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mvneta: use proper rxq_number in loop on rx queues

commit ca5902a6547f662419689ca28b3c29a772446caa upstream.

When adding the RX queue association with each CPU, a typo was made in
the mvneta_cleanup_rxqs() function. This patch fixes it.

[gregory.clement@free-electrons.com: add commit log and fixes tag]
Fixes: 2dcf75e2793c ("net: mvneta: Associate RX queues with each CPU")
Signed-off-by: Yelena Krivosheev <yelena@marvell.com>
Tested-by: Dmitri Epshtein <dima@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mvneta: clear interface link status on port disable

commit 4423c18e466afdfb02a36ee8b9f901d144b3c607 upstream.

When port connect to PHY in polling mode (with poll interval 1 sec),
port and phy link status must be synchronize in order don't loss link
change event.

[gregory.clement@free-electrons.com: add fixes tag]
Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit")
Signed-off-by: Yelena Krivosheev <yelena@marvell.com>
Tested-by: Dmitri Epshtein <dima@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libnvdimm, pfn: fix start_pad handling for aligned namespaces

commit 19deaa217bc04e83b59b5e8c8229eb0e53ad9efc upstream.

The alignment checks at pfn driver startup fail to properly account for
the 'start_pad' in the case where the namespace is misaligned relative
to its internal alignment. This is typically triggered in 1G aligned
namespace, but could theoretically trigger with small namespace
alignments. When this triggers the kernel reports messages of the form:

    dax2.1: bad offset: 0x3c000000 dax disabled align: 0x40000000

Fixes: 1ee6667cd8d1 ("libnvdimm, pfn, dax: fix initialization vs autodetect...")
Reported-by: Jane Chu <jane.chu@oracle.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Dereference BHRB entries safely

commit f41d84dddc66b164ac16acf3f584c276146f1c48 upstream.

It's theoretically possible that branch instructions recorded in
BHRB (Branch History Rolling Buffer) entries have already been
unmapped before they are processed by the kernel. Hence, trying to
dereference such memory location will result in a crash. eg:

    Unable to handle kernel paging request for data at address 0xd000000019c41764
    Faulting instruction address: 0xc000000000084a14
    NIP [c000000000084a14] branch_target+0x4/0x70
    LR [c0000000000eb828] record_and_restart+0x568/0x5c0
    Call Trace:
    [c0000000000eb3b4] record_and_restart+0xf4/0x5c0 (unreliable)
    [c0000000000ec378] perf_event_interrupt+0x298/0x460
    [c000000000027964] performance_monitor_exception+0x54/0x70
    [c000000000009ba4] performance_monitor_common+0x114/0x120

Fix it by deferefencing the addresses safely.

Fixes: 691231846ceb ("powerpc/perf: Fix setting of "to" addresses for BHRB")
Suggested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Use probe_kernel_read() which is clearer, tweak change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: sunxi: sun9i-mmc: Implement reset callback for reset controls

commit 61d2f2a05765a5f57149efbd93e3e81a83cbc2c1 upstream.

Our MMC host driver now issues a reset, instead of just deasserting
the reset control, since commit c34eda69ad4c ("mmc: sunxi: Reset the
device at probe time"). The sun9i-mmc clock driver does not support
this, and will fail, which results in MMC not probing.

This patch implements the reset callback by asserting the reset control,
then deasserting it after a small delay.

Fixes: 7a6fca879f59 ("clk: sunxi: Add driver for A80 MMC config clocks/resets")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/20171218035751.20661-1-wens@csie.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: x86: fix RSM when PCID is non-zero

commit fae1a3e775cca8c3a9e0eb34443b310871a15a92 upstream.

rsm_load_state_64() and rsm_enter_protected_mode() load CR3, then
CR4 & ~PCIDE, then CR0, then CR4.

However, setting CR4.PCIDE fails if CR3[11:0] != 0.  It's probably easier
in the long run to replace rsm_enter_protected_mode() with an emulator
callback that sets all the special registers (like KVM_SET_SREGS would
do).  For now, set the PCID field of CR3 only after CR4.PCIDE is 1.

Reported-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Fixes: 660a5d517aaab9187f93854425c4c63f4a09195c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: X86: Fix load RFLAGS w/o the fixed bit

commit d73235d17ba63b53dc0e1051dbc10a1f1be91b71 upstream.

 *** Guest State ***
 CR0: actual=0x0000000000000030, shadow=0x0000000060000010, gh_mask=fffffffffffffff7
 CR4: actual=0x0000000000002050, shadow=0x0000000000000000, gh_mask=ffffffffffffe871
 CR3 = 0x00000000fffbc000
 RSP = 0x0000000000000000  RIP = 0x0000000000000000
 RFLAGS=0x00000000         DR7 = 0x0000000000000400
        ^^^^^^^^^^

The failed vmentry is triggered by the following testcase when ept=Y:

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[5];
    int main()
    {
     r[2] = open("/dev/kvm", O_RDONLY);
     r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
     r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7);
     struct kvm_regs regs = {
     .rflags = 0,
     };
     ioctl(r[4], KVM_SET_REGS, &regs);
     ioctl(r[4], KVM_RUN, 0);
    }

X86 RFLAGS bit 1 is fixed set, userspace can simply clearing bit 1
of RFLAGS with KVM_SET_REGS ioctl which results in vmentry fails.
This patch fixes it by oring X86_EFLAGS_FIXED during ioctl.

Suggested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Quan Xu <quan.xu0@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: cherryview: Mask all interrupts on Intel_Strago based systems

commit d2b3c353595a855794f8b9df5b5bdbe8deb0c413 upstream.

Guenter Roeck reported an interrupt storm on a prototype system which is
based on Cyan Chromebook. The root cause turned out to be a incorrectly
configured pin that triggers spurious interrupts. This will be fixed in
coreboot but currently we need to prevent the interrupt storm from
happening by masking all interrupts (but not GPEs) on those systems.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=197953
Fixes: bcb48cca23ec ("pinctrl: cherryview: Do not mask all interrupts in probe")
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: xilinx: Detect stall with Unknown commands

commit 5a1314fa697fc65cefaba64cd4699bfc3e6882a6 upstream.

When the core is configured in C_SPI_MODE > 0, it integrates a
lookup table that automatically configures the core in dual or quad mode
based on the command (first byte on the tx fifo).

Unfortunately, that list mode_?_memoy_*.mif does not contain all the
supported commands by the flash.

Since 4.14 spi-nor automatically tries to probe the flash using SFDP
(command 0x5a), and that command is not part of the list_mode table.

Whit the right combination of C_SPI_MODE and C_SPI_MEMORY this leads
into a stall that can only be recovered with a soft rest.

This patch detects this kind of stall and returns -EIO to the caller on
those commands. spi-nor can handle this error properly:

m25p80 spi0.0: Detected stall. Check C_SPI_MODE and C_SPI_MEMORY. 0x21 0x2404
m25p80 spi0.0: SPI transfer failed: -5
spi_master spi0: failed to transfer one message from queue
m25p80 spi0.0: s25sl064p (8192 Kbytes)

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Hide Diva-built-in serial aux and graphics card

commit bcf3f1752a622f1372d3252d0fea8855d89812e7 upstream.

Diva GSP card has built-in serial AUX port and ATI graphic card which simply
don't work and which both don't have external connectors.  User Guides even
mention that those devices shouldn't be used.
So, prevent that Linux drivers try to enable those devices.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI / PM: Force devices to D0 in pci_pm_thaw_noirq()

commit 5839ee7389e893a31e4e3c9cf17b50d14103c902 upstream.

It is incorrect to call pci_restore_state() for devices in low-power
states (D1-D3), as that involves the restoration of MSI setup which
requires MMIO to be operational and that is only the case in D0.

However, pci_pm_thaw_noirq() may do that if the driver's "freeze"
callbacks put the device into a low-power state, so fix it by making
it force devices into D0 via pci_set_power_state() instead of trying
to "update" their power state which is pointless.

Fixes: e60514bd4485 (PCI/PM: Restore the status of PCI devices across hibernation)
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Maarten Lankhorst <dev@mblankhorst.nl>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Maarten Lankhorst <dev@mblankhorst.nl>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix the missing ctl name suffix at parsing SU

commit 5a15f289ee87eaf33f13f08a4909ec99d837ec5f upstream.

The commit 89b89d121ffc ("ALSA: usb-audio: Add check return value for
usb_string()") added the check of the return value from
snd_usb_copy_string_desc(), which is correct per se, but it introduced
a regression.  In the original code, either the "Clock Source",
"Playback Source" or "Capture Source" suffix is added after the
terminal string, while the commit changed it to add the suffix only
when get_term_name() is failing.  It ended up with an incorrect ctl
name like "PCM" instead of "PCM Capture Source".

Also, even the original code has a similar bug: when the ctl name is
generated from snd_usb_copy_string_desc() for the given iSelector, it
also doesn't put the suffix.

This patch addresses these issues: the suffix is added always when no
static mapping is found.  Also the patch tries to put more comments
and cleans up the if/else block for better readability in order to
avoid the same pitfall again.

Fixes: 89b89d121ffc ("ALSA: usb-audio: Add check return value for usb_string()")
Reported-and-tested-by: Mauro Santos <registo.mailling@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add native DSD support for Esoteric D-05X

commit 866f7ed7d67936dcdbcddc111c8af878c918fe7c upstream.

Adds VID:PID of Esoteric D-05X to the TEAC device id's.
Renames the is_teac_50X_dac() function to is_teac_dsd_dac() to cover
broader device family from the same corporation sharing the same USB
audio implementation.

Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: rawmidi: Avoid racy info ioctl via ctl device

commit c1cfd9025cc394fd137a01159d74335c5ac978ce upstream.

The rawmidi also allows to obtaining the information via ioctl of ctl
API.  It means that user can issue an ioctl to the rawmidi device even
when it's being removed as long as the control device is present.
Although the code has some protection via the global register_mutex,
its range is limited to the search of the corresponding rawmidi
object, and the mutex is already unlocked at accessing the rawmidi
object.  This may lead to a use-after-free.

For avoiding it, this patch widens the application of register_mutex
to the whole snd_rawmidi_info_select() function.  We have another
mutex per rawmidi object, but this operation isn't very hot path, so
it shouldn't matter from the performance POV.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>