staging: wilc1000: remove unused code to set and get IP address

Cleanup code to remove the variables related to setting and getting IP
address as this case was not handled from firmware side.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: use short names to fix over 80 issue in tcp_process()

Use short variable names to avoid line over 80 chars checkpatch warning
in tcp_process().

struct pending_acks_info     --> struct pending_ack
int tcp_pending_ack_idx      --> int ack_idx
u32 pending_ack              --> u32 pending_ack_idx

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: avoid line over 80 chars in wilc_wlan_txq_filter_dup_tcp_ack()

Cleanup patch to avoid line over 80 chars checkpatch issue introduced in
previous code refactor commit.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: move tcp_ack_filter algo related variables to 'wilc_vif' struct

Avoid use of static variables and move them as part of wilc_vif struct.
Move all the parameters related to tcp_ack_filter algo to wilc_vif
struct.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: use lowercase for get_BSSID() and HIL variable

Cleanup patch to use lowercase name for get_BSSID() and HIL variable.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: refactor tcp_process() to avoid extra leading tabs

Refactor tcp_process() to avoid unnecessary leading tabs in the
function.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: move 'rcv_assoc_resp' as part of hif_drv

Avoid use of static variable and move 'rcv_assoc_resp' as part of
'hif_drv' struct. Rename from 'rcv_assoc_resp' to 'assoc_resp'.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename 'dummy_statistics' variable to 'periodic_stat'

Cleanup patch to use appropriate variable name to fetch the periodic
statistics.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: move 'periodic_rssi' as part of 'wilc_vif' struct

Refactor code to move 'periodic_rssi' as part of wilc_vif struct. Move
'dummy_statistics' from 'wilc' struct to 'wilc_vif' to maintain for
each interface separately.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: move hif_workqueue static variables to 'wilc' structure

Avoid use of static variable hif_workqueue and move it inside 'wilc'
structure.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: refactor code to avoid use of wilc_set_multicast_list global

Refactor the code to avoid use of 'wilc_set_multicast_list' global
variable. Allocate the memory required to keep the multicast mac address
and pass it to the worker thread.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: move static variable clients_count to 'wilc' structure

Avoid use of static variable 'clients_count' and move it part of 'wilc'
structure.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: avoid use of extra 'if' condition in wilc_init()

Cleanup patch to avoid the avoid extra 'if' condition and clubbed the
same condition in single 'if' block.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove unused variable 'op_ifcs'

After code refactor in previous commit now 'op_ifcs' is not require any
more, so remove it.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: move during_ip_timer & wilc_optaining_ip to 'wilc_vif' struct

Move global variable 'wilc_during_ip_timer' and 'wilc_optaining_ip' to
'wilc_vif' structure.

Rename these variables like below

wilc_during_ip_timer -> during_ip_timer
wilc_optaining_ip -> obtaining_ip.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: moved last_scanned_shadow & last_scanned_cnt to wilc_priv struct

Avoid use of static variables and moved the varibles as part of private
data. last_scanned_shadow & last_scanned_cnt variable is moved to
'wilc_priv' to maintain for each interface. After moving static
variable, clear_shadow_scan() doesn't require check 'op_ifcs'
count as now for each interface the againg timer is initiated.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove unnecessary NULL check in clear_shadow_scan()

Cleanup patch to remove the unnecessary NULL check before freeing up ies
information in clear_shadow_scan().

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix to use correct index to free scanned info in clear_shadow_scan()

Fixes to use correct index to free the allocated memory for ies
information. The check was done using 'last_scanned_cnt' index and its
not correct, so use the correct index ('i') to check for before freeing
the allocated memory.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: move 'aging_timer' static variable to wilc_priv struct

Moved 'aging_timer' to wilc_priv struct instead of having it as static
variable.
As 'aging_timer' is maintained for each interfaces so 'op_ifcs' check is
not required before the timer_setup() and del_timer_sync() call.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: move 'wilc_enable_ps' global variable into 'wilc' struct

Instead of having 'wilc_enable_ps' as global variable moved it to 'wilc'
structure. Rename 'wilc_enable_ps' to 'enable_ps' as its already part of
'wilc' structure

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: check for i out of range before accessing szLine[i]

Currently szLine[i] is being accessed before the index i is being
ranged checked.  Fix this by checking the range first.  Also, evaluate
the length of the string szLine just once rather than multiple times and
move the loop variable i to an inner scope and make it an int.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8712: Add space between else and opening brace

issue found by checkpatch

Signed-off-by: André Lehmann <lenneman@web.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: ieee80221: Add missing space

Fix checkpatch.pl errors that missing space before ','.

Signed-off-by: Sidong Yang <realwakka@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8192u: Remove typedef from enum opt_rst_type_e - Style

Remove the typedef directive from enumerated type opt_rst_type_e,
this change clears the checkpatch issue with defining new types in
the code.

This is a coding style change which should not impact runtime
code execution.

Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8192u: Remove typedef from firmware_init_step_e - Style

Remove the typedef directive from enumerated type firmware_init_step_e
this clears the checkpatch issue with adding new types to the code.

This is a coding style change which should have no impact on runtime
code execution.

Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8192u: Refactor GET_COMMAND_PACKET_FRAG_THRESHOLD - Style

The MACRO GET_COMMAND_PACKET_FRAG_THRESHOLD causes a number of
checkpatch issues so has been refactored to use braces around the
parameter 'v' to avoid precedence issues, and to add spaces around
operators.

These changes are coding style changes which should have no impact
on runtime code execution.

Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8192u: Remove unused RTL8190_CPU_START_OFFSET - Style

The defined constant RTL8190_CPU_START_OFFSET is not used in the code
so has been removed. This is a coding style change which should have
no impact on runtime code execution.

Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8192u: Fix space characters - Style

Fix the spacing issues, remove space after cast operation, and replace
spaces at start of line with tab.

These changes are purely coding style changes to resolve checkpatch
issues. There should be no impact on runtime code execution.

Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8192u: Refactor RT_TRACE - Style

Refactor the MACRO RT_TRACE to add parentheses around the parameter
'component', this clears the checkpatch warning with respect to
precedence issues.

This is a coding style change which should have no impact on runtime
code execution.

Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8192u: Rename Rx_Smooth_Factor - Style

Rename the MACRO Rx_Smooth_Factor to RX_SMOOTH_FACTOR, this clears the
checkpatch issue with CamelCase naming.

This is a coding style change which should have no impact on runtime
code execution.

Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8192u: Rename RTL819xU_MODULE_NAME - Style

Rename the MACRO RTL819xU_MODULE_NAME to RTL819XU_MODULE_NAME, this
clears the checkpatch issue with CamelCase naming.

This is a coding style change which should have no impact on runtime
code execution.

Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8192u: Add SPDX-License-Identifier - Style

Add SPDX-License-Identifier tag to the start of header file. This is
a coding style change which should have no impact on runtime code
execution.

Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8192u: Remove unused functions - Style

Remove unused function declarations. This is a coding style change
which should have no impact on runtime code execution.

Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8192u: Remove read_cam() - Style

Remove the function read_cam(), as it is unused in code.

Simple style change which should not impact runtime code execution.

Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8192u: Remove write_cam() - Style

Remove the function write_cam() as it is unused.

Simple style change which should not impact runtime code execution.

Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtlwifi: efuse: Fixed a line length code styling issue.

Fixed a code styling issue.

Signed-off-by: Tom Todd <thomas.m.a.todd@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt7621-mmc: Fix debug macro ERR_MSG and its usages

Replace all usages of ERR_MSG with with dev_<level> without __func__
or __LINE__ or current->comm and current->pid. Remove the do {}
while(0) loop for the single statement macro. Delete commented
ERR_MSG() usage. Drop ERR_MSG from dbg.h. Issue found by checkpatch.

Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt7621-mmc: Delete N_MSG() and all its users

This patch removes N_MSG() and all its users since it is a no-op.

Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/vboxvideo: Replace ttm_bo_unref with ttm_bo_put

The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.

A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.

The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: remove redundant code in "#if 0" blocks

Remove two blocks of code that checkpatch identified as redundant
because they were enclosed in "#if...#endif". In the case of
prism2fw.c the associated "TODO" comment was retained.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove unnecessary parentheses

Remove unnecessary parentheses to follow kernel coding style
and clean checkpatch issues.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove whitespace

Replace tabs with spaces where appropriate.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fix comparsions to true

Use if(x) instead of if(x == true).

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove code valid only for 5 GHz

Remove code that is only valid for channels > 14.
This addresses the below TODO item.

- find and remove remaining code valid only for 5 GHz. Most of the obvious
  ones have been removed, but things like channel > 14 still exist.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove pointless comment

This comment adds no useful information to the code,
so remove it.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: simplify function comment

Simplify function comment to a single line.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Fix two sleep-in-atomic-context bugs in rtw_chk_hi_queue_cmd()

usb_write_port_complete() in usb_ops_linux.c is a completion handler
function for the USB driver. So it should not sleep, but it is can sleep
according to the function call paths (from bottom to top) in Linux-4.16:

[FUNC] kzalloc(GFP_KERNEL)
drivers/staging/rtl8188eu/core/rtw_cmd.c, 1081:
kzalloc in rtw_chk_hi_queue_cmd
drivers/staging/rtl8188eu/os_dep/usb_ops_linux.c, 604:
rtw_chk_hi_queue_cmd in usb_write_port_complete

[FUNC] kzalloc(GFP_KERNEL)
drivers/staging/rtl8188eu/core/rtw_cmd.c, 1075:
kzalloc in rtw_chk_hi_queue_cmd
drivers/staging/rtl8188eu/os_dep/usb_ops_linux.c, 604:
rtw_chk_hi_queue_cmd in usb_write_port_complete

To fix these bugs, GFP_KERNEL is replaced with GFP_ATOMIC.

These bugs are found by my static analysis tool DSAC.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: video: fix registration of an empty comp core_component

Currently we have structrues comp (which is empty) and comp_info being
used to register and deregister the component.  This mismatch in naming
occurred from a previous commit that renamed aim_info to comp. Fix this
to use consistent component naming in line with most/net, most/sound etc.

This fixes the message two issues, one with a null empty name when
loading the module:

[ 1485.269515] most_core: registered new core component (null)

and an Oops when removing the module:

[ 1485.277971] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 1485.278648] PGD 0 P4D 0
[ 1485.279253] Oops: 0002 [#2] SMP PTI
[ 1485.279847] CPU: 1 PID: 32629 Comm: modprobe Tainted: P      D WC OE     4.18.0-8-generic #9
[ 1485.280442] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
[ 1485.281040] RIP: 0010:most_deregister_component+0x3c/0x70 [most_core]
.. etc

Fixes: 1b10a0316e2d ("staging: most: video: remove aim designators")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: net: make array 'broadcast' static, shrinks object size

Don't populate the array 'broadcast' on the stack but instead make it
static. Makes the object code smaller by 53 bytes:

Before:
   text    data     bss     dec     hex filename
  10511    1521     448   12480    30c0 drivers/staging/most/net/net.o

After:
   text    data     bss     dec     hex filename
  10394    1585     448   12427    308b drivers/staging/most/net/net.o

(gcc version 8.2.0 x86_64)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Simplify card object management

Instead of creating a dummy child device to manage the card object,
just use devm stuff directly for releasing with snd_card_free().
This results in a lot of code reduction.

Since the dummy child devices are gone, the device object to be passed
to the memory allocator needs to be adjusted as well.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Simplify kctl creation helpers

Just a minor code refactoring and adding some const prefix.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Simplify PCM creation helpers

All three functions to create PCM objects are fairly resemble, and can
be unified to a single common helper.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Set SNDRV_PCM_INFO_SYNC_APPLPTR

The recent ALSA PCM core supports the SNDRV_PCM_INFO_SYNC_APPLPTR flag
indicating that the driver needs the ack call at each appl_ptr
update.  This is requirement for the indirect PCM implementations like
bcm2835-audio driver, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Use coherent device buffers

The memory access to the pages allocated with
SNDRV_DMA_TYPE_CONTINUOUS are basically non-coherent, and it becomes a
problem when a process accesses via mmap.

For the more consistent access, use the device coherent memory, just
by replacing the call pattern in the allocator helpers.

The only point we need to be careful for is the device object passed
there; since bcm2835-audio driver creates fake devices and each card
is created on top of that, we need to pass its parent device as the
real device object.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Move module parameter description

For more consistency, move the module parameter description right
after its variable definition.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Remove unnecessary header file includes

Yet a few header files are included unnecessarily.  Drop them.

Also remove trivial comments.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Use standard error print helpers

For making the whole code more consistent, replace the home-made debug
print macros with the standard dev_err() & co.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Use card->private_data

Instead of allocating a separate snd_device object, let snd_card_new()
allocate the private resource.  This simplifies the code.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Operate non-atomic PCM ops

This is the most significant part in the patch series.

The bcm2835-audio driver used to queue the commands to vc04 core via
workqueue, but basically the whole accesses to vc04 core are done in
the sleepable context, including the callback calls.  In such a case,
rewriting the code using non-atomic PCM ops will simplify the logic a
lot.

This patch does it: all workqueue are gone and each former-work
implementation is now directly called from PCM ops like trigger and
write transfer.

Along with it, the DMA position updater, bcm2835_playback_fifo(), was
also rewritten to use a simpler logic.  Now it handles the XRUN and
draining properly by calling snd_pcm_stop() conditionally.

The current position is kept in atomic_t value so that it can be read
concurrently from the pointer callback.

Also, the bcm2835_audio_instance object is allocated at the beginning
of bcm2835_audio_open().  This makes the resource management clearer.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Code refactoring of vchiq accessor codes

This is a cleanup and code refactoring in bcm2835-vchiq.c.

The major code changes are to provide local helpers for easier use of
lock / unlock, and message passing with/without response wait.  This
allows us to reduce lots of open codes.

Also, the max packet is set at opening the stream, not at each time
when the write gets called.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Make single vchi handle

The bcm2835_audio_instance object contains the array of
VCHI_SERVICE_HANDLE_T, while the code assumes and uses only the first
element explicitly.  Let's reduce to a single vchi handle for
simplifying the code.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Add 10ms period constraint

It seems that the resolution of vc04 callback is in 10 msec; i.e. the
minimal period size is also 10 msec.

This patch adds the corresponding hw constraint.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Drop superfluous mutex lock during prepare

The chip->audio_mutex is used basically for protecting the opened
stream assignment, and the prepare callback is irrelevant with it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Drop debug messages in bcm2835-pcm.c

These debug messages worsen the code readability a lot while they give
little debuggability (which we already have via tracing, in anyway).

Let's clean them up.  This allows us to reduce the
snd_bcm2835_pcm_lib_ioctl() function to be a direct call of the
snd_pcm_lib_ioctl callback (like most other drivers do), too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Propagate parameter setup error

When the parameter setup fails, the driver should propagate the error
code instead of silently ignoring it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Drop useless NULL check

alsa_stream->chip can be never NULL.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Drop unnecessary pcm indirect setup

The hw_queue_size of PCM indirect helper doesn't need to be set up if
you use the whole given buffer size.  Drop the useless
initialization, which just confuses readers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Use PCM runtime values instead

Some fields in alsa_stream are the values we keep already in PCM
runtime object, hence they are redundant.  Use the standard PCM
runtime values instead of the private copies.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Kill unused spinlock

The alsa_stream->lock is never used.  Kill it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Fix incorrect draining handling

The handling of SNDRV_PCM_TRIGGER_STOP at the trigger callback is
incorrect: when the STOP is issued, the driver is supposed to drop the
stream immediately.  Meanwhile bcm2835 driver checks the DRAINING
state and tries to issue some different command.

This patch straightens things a bit, dropping the incorrect state
checks.  The draining behavior would be still not perfect at this
point, but will be improved in a later patch.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Drop useless running flag and check

The running flag of alsa_stream is basically useless.  The running
state is strictly controlled in ALSA PCM core side, hence the check in
PCM trigger and close callbacks are superfluous.

Also, the prefill ack at trigger start became superfluous nowadays
with the ALSA PCM core update.

Let's rip them off.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Remove superfluous open flag

All the alsa_stream->open flag checks in the current code are
redundant, and they cannot be racy.  For the code simplification,
let's remove the flag and its check.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Remove redundant function calls

bcm2835_audio_setup(), bcm2835_audio_flush_buffers() and
bcm2835_audio_flush_playback_buffers() functions do implement
nothing.

Also, bcm2835_audio_set_ctls() is already called inside
bcm2835_audio_set_params(), so the later call is superfluous.

This patch removes these superfluous implementations.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Fix mute controls, volume handling cleanup

In the current code, the mute control is dealt in a special manner,
modifying the current volume and saving the old volume, etc.  This is
inconsistent (e.g. change the volume while muted, then unmute), and
way too complex.

Also, the whole volume handling code has conversion between ALSA
volume and raw volume values, which can lead to another
inconsistency and complexity.

This patch simplifies these points:
- The ALSA volume value is saved in chip->volume
- volume->mute saves the mute state
- The mute state is evaluated only when the actual volume is passed to
  the hardware, bcm2835_audio_set_ctls()

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Remove redundant substream mask checks

The avail_substreams bit mask is checked for the possible racy
accesses, but this cannot happen in practice; i.e. the assignment and
the check are superfluous.

Let's rip them off.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Clean up include files in bcm2835-ctl.c

Only a few of them are really needed.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Remove redundant spdif stream ctls

The "IEC958 Playback Stream" control does basically the very same
thing as "IEC958 Playback Default" redundantly.  The former should
have been stream-specific and restored after closing the stream, but
we don't do in that way.

Since it's nothing but confusion, remove this fake.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Clean up mutex locks

snd-bcm2835 driver takes the lock with mutex_lock_interruptible() in
all places, which don't make sense.  Replace them with the simple
mutex_lock().

Also taking a mutex lock right after creating it for each PCM object
is nonsense, too.  It cannot be racy at that point.  We can get rid of
it.

Last but not least, initializing chip->audio_mutex at each place is
error-prone.  Initialize properly at creating the chip object in
snd_bcm2835_create() instead.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt7621-pci: remove unnecessary check of device_type == pci

PCI host drivers have already matched on compatible strings, so checking
device_type is redundant. Also, device_type is considered deprecated for
FDT though we've still been requiring it for PCI hosts as it is useful
for finding PCI buses.

Cc: devel@driverdev.osuosl.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-dpaa2/ethsw: Fix uninitialized variables

Functions port_vlans_add() and port_vlans_del() could,
in theory, return an uninitialized variable. Fix this
by initializing the variable in question at declaration.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8192u: Rename member pDot11dInfo - Style

Rename 'pDot11dInfo', this member variable of the structure
ieee80211_device causes a checkpatch issue, CamelCase naming. The
member has been renamed 'dot11d_info' to clear this issue.

This is a coding style change which should have no impact on runtime
code execution.

Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8192u: Refactor member variable enabled - Style

The structure rt_dot11d_info contains a memeber variable 'enabled',
which causes a checkpatch issue as it is declared as being of type
bool. The type of the variable has been changed to a 'u8', to clear
the issue.

Additionally to aid searching for the member variable in code it
has been renamed from 'enabled' to 'dot11d_enabled'.

These are purely coding style changes which should not impact runtime
code execution.

Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8192u: Add required SPDX-License-Identifier - Style

Add the required SPDX-License-Identifier to the file r8180_93cx6.h,
this clears a checkpatch issue.

This is a coding style change which should have no impact on runtime
code execution.

Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8192u: Remove unused definitions - Style

Remove unused definitions from the file r8180_93cx6.h.

This is a coding style change which should have no impact on runtime
code execution.

Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: Clean unused debug_show memeber of the heap object

ION had supported heap debug info under /sys/kernel/debug/ion/<heap_name>.
This support have been removed but some leftovers (dead code) still exist.

This patch removes the existing dead code.

Fixes: 15c6098cfec5 ("staging: android: ion: Remove ion_handle and ion_client")
Signed-off-by: Alexey Skidanov <alexey.skidanov@intel.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8192u: Rename dot11d_init to fix name clash

The function dot11d_init() was previously renamed to clear a style
issue. Unfortunately the new name used, dot11d_init(), clashes with
a sybmol which is exported with the same name. To correct this
problem the function has been renamed to rtl8192u_dot11d_init().

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-dpaa2/ethsw: remove redundant pointer 'port_priv'

Pointer 'port_priv' is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
variable 'port_priv' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: Convert to using %pOFn instead of device_node.name

In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Cc: Steve Longerbeam <slongerbeam@gmail.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-media@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712u: Fix compiler warning about strncpy

When strncpy() is called with source and destination strings the same
length, gcc 8 warns that there may be an unterminated string. Using
strlcpy() rather than strncpy() forces a null at the end and quiets the
warning.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Fix compiler warning from strncpy()

When strncpy() is called with source and destination strings the same
length, gcc 8 warns that there may be an unterminated string. This section
is completely reworked to use the known lengths of the strings.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: fix 1 warning and 9 checks

This patch does not change the logic, it only
corrects the formatting and checkpatch checks by
braces {} should be used on all arms of this statement,
unbalanced braces around else statement and warning by
braces {} are not necessary for any arm of this statement.

The patch fixes 9 checks of type:
"Check: braces {} should be used on all arms of this statement";
"Check: Unbalanced braces around else statement";

and 1 warning of type:
"WARNING: braces {} are not necessary for any arm of this statement".

Signed-off-by: Pavel Zemlyanoy <zemlyanoy@ispras.ru>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: formatting alignment parenthesis

This patch does not change the logic, it only
corrects the formatting and checkpatch check by
alignment should match open parenthesis.

The patch fixes 2 check of type:
"Check: Alignment should match open parenthesis".

Signed-off-by: Pavel Zemlyanoy <zemlyanoy@ispras.ru>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: formatting add spaces arround '*'

This patch does not change the logic, it only
corrects the formatting and checkpatch check by
adding spaces around '*'.

The patch fixes 1 check of type:
"Check: spaces preferred around that '*'".

Signed-off-by: Pavel Zemlyanoy <zemlyanoy@ispras.ru>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: formatting spaces around '-'

This patch does not change the logic, it only
corrects the formatting and checkpatch checks by
adding spaces around '-'.

The patch fixes 4 checks of type:
"Check: spaces preferred around that '-'".

Signed-off-by: Pavel Zemlyanoy <zemlyanoy@ispras.ru>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: formatting fix to NULL comparison

This patch does not change the logic, it only
corrects the formatting and checkpatch checks by
to NULL comparison.

The patch fixes 5 checks of type:
"Comparison to NULL could be written".

Signed-off-by: Pavel Zemlyanoy <zemlyanoy@ispras.ru>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: erofs: formatting fix in unzip_vle_lz4.c

This patch does not change the logic, it only
corrects the formatting and checkpatch warnings by
adding "int" to the unsigned type.

The patch fixes 11 warnings of the type:
"WARNING: Prefer 'unsigned int' to bare use of 'unsigned'"

Signed-off-by: Pavel Zemlyanoy <zemlyanoy@ispras.ru>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "staging: erofs: disable compiling temporarile"

This reverts commit 156c3df8d4db4e693c062978186f44079413d74d.

Since XArray and the new mount apis aren't merged in 4.19-rc1
merge window, the BROKEN mark can be reverted directly without
any problems.

Fixes: 156c3df8d4db ("staging: erofs: disable compiling temporarile")
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: octeon-usb: Replaces CVMX_WAIT_FOR_FIELD32 macro with a function

Replaces CVMX_WAIT_FOR_FIELD32 macro with equivalent function.

Signed-off-by: Georgios Tsotsos <tsotsos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: One Laptop Per Child: fix SPDX-License-Identifier issue

Add SPDX-License-Identifier to the source files.
Remove redundant, old license.

Signed-off-by: Arkadiusz Lis <areklis909@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: do not make interface dependent attrs default for all channels

The channel attribute dbr_size is only relevant for the DIM2 interface. so
is the packets_per_xact for USB. This patch cleans up the driver's ABI by
not showing all attributes by default for each channel, but only on those
they belong to.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>