review.tizen.org Git - platform/kernel/linux-rpi.git/log

pds_vdpa: always allow offering VIRTIO_NET_F_MAC

Our driver sets a mac if the HW is 00:..:00 so we need to be sure to
advertise VIRTIO_NET_F_MAC even if the HW doesn't.  We also need to be
sure that virtio_net sees the VIRTIO_NET_F_MAC and doesn't rewrite the
mac address that a user may have set with the vdpa utility.

After reading the hw_feature bits, add the VIRTIO_NET_F_MAC to the driver's
supported_features and use that for reporting what is available.  If the
HW is not advertising it, be sure to strip the VIRTIO_NET_F_MAC before
finishing the feature negotiation.  If the user specifies a device_features
bitpattern in the vdpa utility without the VIRTIO_NET_F_MAC set, then
don't set the mac.

Fixes: 151cc834f3dd ("pds_vdpa: add support for vdpa and vdpamgmt interfaces")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230711042437.69381-3-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

pds_vdpa: reset to vdpa specified mac

When the vdpa device is reset, also reinitialize it with the mac address
that was assigned when the device was added.

Fixes: 151cc834f3dd ("pds_vdpa: add support for vdpa and vdpamgmt interfaces")
Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230711042437.69381-2-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

virtio-net: Zero max_tx_vq field for VIRTIO_NET_CTRL_MQ_HASH_CONFIG case

Kernel uses `struct virtio_net_ctrl_rss` to save command-specific-data
for both the VIRTIO_NET_CTRL_MQ_HASH_CONFIG and
VIRTIO_NET_CTRL_MQ_RSS_CONFIG commands.

According to the VirtIO standard, "Field reserved MUST contain zeroes.
It is defined to make the structure to match the layout of
virtio_net_rss_config structure, defined in 5.1.6.5.7.".

Yet for the VIRTIO_NET_CTRL_MQ_HASH_CONFIG command case, the `max_tx_vq`
field in struct virtio_net_ctrl_rss, which corresponds to the
`reserved` field in struct virtio_net_hash_config, is not zeroed,
thereby violating the VirtIO standard.

This patch solves this problem by zeroing this field in
virtnet_init_default_rss().

Cc: Andrew Melnychenko <andrew@daynix.com>
Cc: stable@vger.kernel.org
Fixes: c7114b1249fa ("drivers/net/virtio_net: Added basic RSS support.")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230810110405.25558-1-yin31149@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>

vdpa/mlx5: Fix crash on shutdown for when no ndev exists

The ndev was accessed on shutdown without a check if it actually exists.
This triggered the crash pasted below.

Instead of doing the ndev check, delete the shutdown handler altogether.
The irqs will be released at the parent VF level (mlx5_core).

BUG: kernel NULL pointer dereference, address: 0000000000000300
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 6.5.0-rc2_for_upstream_min_debug_2023_07_17_15_05 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5v_shutdown+0xe/0x50 [mlx5_vdpa]
RSP: 0018:ffff8881003bfdc0 EFLAGS: 00010286
RAX: ffff888103befba0 RBX: ffff888109d28008 RCX: 0000000000000017
RDX: 0000000000000001 RSI: 0000000000000212 RDI: ffff888109d28000
RBP: 0000000000000000 R08: 0000000d3a3a3882 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000000 R12: ffff888109d28000
R13: ffff888109d28080 R14: 00000000fee1dead R15: 0000000000000000
FS:  00007f4969e0be40(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000300 CR3: 00000001051cd006 CR4: 0000000000370eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  <TASK>
  ? __die+0x20/0x60
  ? page_fault_oops+0x14c/0x3c0
  ? exc_page_fault+0x75/0x140
  ? asm_exc_page_fault+0x22/0x30
  ? mlx5v_shutdown+0xe/0x50 [mlx5_vdpa]
  device_shutdown+0x13e/0x1e0
  kernel_restart+0x36/0x90
  __do_sys_reboot+0x141/0x210
  ? vfs_writev+0xcd/0x140
  ? handle_mm_fault+0x161/0x260
  ? do_writev+0x6b/0x110
  do_syscall_64+0x3d/0x90
  entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f496990fb56
RSP: 002b:00007fffc7bdde88 EFLAGS: 00000206 ORIG_RAX: 00000000000000a9
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f496990fb56
RDX: 0000000001234567 RSI: 0000000028121969 RDI: fffffffffee1dead
RBP: 00007fffc7bde1d0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000
R13: 00007fffc7bddf10 R14: 0000000000000000 R15: 00007fffc7bde2b8
  </TASK>
CR2: 0000000000000300
---[ end trace 0000000000000000 ]---

Fixes: bc9a2b3e686e ("vdpa/mlx5: Support interrupt bypassing")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20230803152648.199297-1-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vdpa/mlx5: Delete control vq iotlb in destroy_mr only when necessary

mlx5_vdpa_destroy_mr can be called from .set_map with data ASID after
the control virtqueue ASID iotlb has been populated. The control vq
iotlb must not be cleared, since it will not be populated again.

So call the ASID aware destroy function which makes sure that the
right vq resource is destroyed.

Fixes: 8fcd20c30704 ("vdpa/mlx5: Support different address spaces for control and data")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Message-Id: <20230802171231.11001-5-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

vdpa/mlx5: Fix mr->initialized semantics

The mr->initialized flag is shared between the control vq and data vq
part of the mr init/uninit. But if the control vq and data vq get placed
in different ASIDs, it can happen that initializing the control vq will
prevent the data vq mr from being initialized.

This patch consolidates the control and data vq init parts into their
own init functions. The mr->initialized will now be used for the data vq
only. The control vq currently doesn't need a flag.

The uninitializing part is also taken care of: mlx5_vdpa_destroy_mr got
split into data and control vq functions which are now also ASID aware.

Fixes: 8fcd20c30704 ("vdpa/mlx5: Support different address spaces for control and data")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Message-Id: <20230802171231.11001-3-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

vdpa/mlx5: Correct default number of queues when MQ is on

The standard specifies that the initial number of queues is the
default, which is 1 (1 tx, 1 rx).

Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230727172354.68243-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>

virtio-vdpa: Fix cpumask memory leak in virtio_vdpa_find_vqs()

Free the cpumask allocated by create_affinity_masks() before returning
from the function.

Fixes: 3dad56823b53 ("virtio-vdpa: Support interrupt affinity spreading mechanism")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20230726191036.14324-1-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>

vduse: Use proper spinlock for IRQ injection

The IRQ injection work used spin_lock_irq() to protect the
scheduling of the softirq, but spin_lock_bh() should be
used.

With spin_lock_irq(), we noticed delay of more than 6
seconds between the time a NAPI polling work is scheduled
and the time it is executed.

Fixes: c8a6153b6c59 ("vduse: Introduce VDUSE - vDPA Device in Userspace")
Cc: xieyongji@bytedance.com
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-Id: <20230705114505.63274-1-maxime.coquelin@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>

vdpa: Enable strict validation for netlinks ops

The previous patches added the missing nla policies that were required for
validation to work.

Now strict validation on netlink ops can be enabled. This patch does it.

Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Cc: stable@vger.kernel.org
Message-Id: <20230727175757.73988-9-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vdpa: Add max vqp attr to vdpa_nl_policy for nlattr length check

The vdpa_nl_policy structure is used to validate the nlattr when parsing
the incoming nlmsg. It will ensure the attribute being described produces
a valid nlattr pointer in info->attrs before entering into each handler
in vdpa_nl_ops.

That is to say, the missing part in vdpa_nl_policy may lead to illegal
nlattr after parsing, which could lead to OOB read just like CVE-2023-3773.

This patch adds the missing nla_policy for vdpa max vqp attr to avoid
such bugs.

Fixes: ad69dd0bf26b ("vdpa: Introduce query of device config layout")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Cc: stable@vger.kernel.org
Message-Id: <20230727175757.73988-7-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vdpa: Add queue index attr to vdpa_nl_policy for nlattr length check

The vdpa_nl_policy structure is used to validate the nlattr when parsing
the incoming nlmsg. It will ensure the attribute being described produces
a valid nlattr pointer in info->attrs before entering into each handler
in vdpa_nl_ops.

That is to say, the missing part in vdpa_nl_policy may lead to illegal
nlattr after parsing, which could lead to OOB read just like CVE-2023-3773.

This patch adds the missing nla_policy for vdpa queue index attr to avoid
such bugs.

Fixes: 13b00b135665 ("vdpa: Add support for querying vendor statistics")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Cc: stable@vger.kernelorg
Message-Id: <20230727175757.73988-5-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vdpa: Add features attr to vdpa_nl_policy for nlattr length check

The vdpa_nl_policy structure is used to validate the nlattr when parsing
the incoming nlmsg. It will ensure the attribute being described produces
a valid nlattr pointer in info->attrs before entering into each handler
in vdpa_nl_ops.

That is to say, the missing part in vdpa_nl_policy may lead to illegal
nlattr after parsing, which could lead to OOB read just like CVE-2023-3773.

This patch adds the missing nla_policy for vdpa features attr to avoid
such bugs.

Fixes: 90fea5a800c3 ("vdpa: device feature provisioning")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Cc: stable@vger.kernel.org
Message-Id: <20230727175757.73988-3-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-pci: Fix legacy device flag setting error in probe

The 'is_legacy' flag is used to differentiate between legacy vs modern
device. Currently, it is based on the value of vp_dev->ldev.ioaddr.
However, due to the shared memory of the union between struct
virtio_pci_legacy_device and struct virtio_pci_modern_device, when
virtio_pci_modern_probe modifies the content of struct
virtio_pci_modern_device, it affects the content of struct
virtio_pci_legacy_device, and ldev.ioaddr is no longer zero, causing
the 'is_legacy' flag to be set as true. To resolve issue, when legacy
device is probed, mark 'is_legacy' as true, when modern device is
probed, keep 'is_legacy' as false.

Fixes: 4f0fc22534e3 ("virtio_pci: Optimize virtio_pci_device structure size")
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20230719154550.79536-1-feliu@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>

MAINTAINERS: add vhost-scsi entry and myself as a co-maintainer

I've been doing a lot of the development on vhost-scsi the last couple of
years, so per Michael T's suggestion this adds me as co-maintainer.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230715142027.5572-1-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>

vhost-scsi: Rename vhost_scsi_iov_to_sgl

Rename vhost_scsi_iov_to_sgl to vhost_scsi_map_iov_to_sgl so it matches
matches the naming style used for vhost_scsi_copy_iov_to_sgl.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230709202859.138387-3-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>

vhost-scsi: Fix alignment handling with windows

The linux block layer requires bios/requests to have lengths with a 512
byte alignment. Some drivers/layers like dm-crypt and the directi IO code
will test for it and just fail. Other drivers like SCSI just assume the
requirement is met and will end up in infinte retry loops. The problem
for drivers like SCSI is that it uses functions like blk_rq_cur_sectors
and blk_rq_sectors which divide the request's length by 512. If there's
lefovers then it just gets dropped. But other code in the block/scsi
layer may use blk_rq_bytes/blk_rq_cur_bytes and end up thinking there is
still data left and try to retry the cmd. We can then end up getting
stuck in retry loops where part of the block/scsi thinks there is data
left, but other parts think we want to do IOs of zero length.

Linux will always check for alignment, but windows will not. When
vhost-scsi then translates the iovec it gets from a windows guest to a
scatterlist, we can end up with sg items where the sg->length is not
divisible by 512 due to the misaligned offset:

sg[0].offset = 255;
sg[0].length = 3841;
sg...
sg[N].offset = 0;
sg[N].length = 255;

When the lio backends then convert the SG to bios or other iovecs, we
end up sending them with the same misaligned values and can hit the
issues above.

This just has us drop down to allocating a temp page and copying the data
when we detect a misaligned buffer and the IO is large enough that it
will get split into multiple bad IOs.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230709202859.138387-2-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>

pds_vdpa: protect Makefile from unconfigured debugfs

debugfs.h protects itself from an undefined DEBUG_FS, so it is
not necessary to check it in the driver code or the Makefile.
The driver code had been updated for this, but the Makefile had
missed the update.

Link: https://lore.kernel.org/linux-next/fec68c3c-8249-7af4-5390-0495386a76f9@infradead.org/
Fixes: a16291b5bcbb ("pds_vdpa: Add new vDPA driver for AMD/Pensando DSC")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230706231718.54198-1-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Acked-by: Jason Wang <jasowang@redhat.com>

virtio-mmio: don't break lifecycle of vm_dev

vm_dev has a separate lifecycle because it has a 'struct device'
embedded. Thus, having a release callback for it is correct.

Allocating the vm_dev struct with devres totally breaks this protection,
though. Instead of waiting for the vm_dev release callback, the memory
is freed when the platform_device is removed. Resulting in a
use-after-free when finally the callback is to be called.

To easily see the problem, compile the kernel with
CONFIG_DEBUG_KOBJECT_RELEASE and unbind with sysfs.

The fix is easy, don't use devres in this case.

Found during my research about object lifetime problems.

Fixes: 7eb781b1bbb7 ("virtio_mmio: add cleanup for virtio_mmio_probe")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Message-Id: <20230629120526.7184-1-wsa+renesas@sang-engineering.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Linux 6.5-rc5

Merge tag 'v6.5-rc5.vfs.fixes' of git://git./linux/kernel/git/vfs/vfs

Pull vfs fixes from Christian Brauner:

- Fix a wrong check for O_TMPFILE during RESOLVE_CACHED lookup

- Clean up directory iterators and clarify file_needs_f_pos_lock()

* tag 'v6.5-rc5.vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  fs: rely on ->iterate_shared to determine f_pos locking
  vfs: get rid of old '->iterate' directory operation
  proc: fix missing conversion to 'iterate_shared'
  open: make RESOLVE_CACHED correctly test for O_TMPFILE

fs: rely on ->iterate_shared to determine f_pos locking

Now that we removed ->iterate we don't need to check for either
->iterate or ->iterate_shared in file_needs_f_pos_lock(). Simply check
for ->iterate_shared instead. This will tell us whether we need to
unconditionally take the lock. Not just does it allow us to avoid
checking f_inode's mode it also actually clearly shows that we're
locking because of readdir.

Signed-off-by: Christian Brauner <brauner@kernel.org>

vfs: get rid of old '->iterate' directory operation

All users now just use '->iterate_shared()', which only takes the
directory inode lock for reading.

Filesystems that never got convered to shared mode now instead use a
wrapper that drops the lock, re-takes it in write mode, calls the old
function, and then downgrades the lock back to read mode.

This way the VFS layer and other callers no longer need to care about
filesystems that never got converted to the modern era.

The filesystems that use the new wrapper are ceph, coda, exfat, jfs,
ntfs, ocfs2, overlayfs, and vboxsf.

Honestly, several of them look like they really could just iterate their
directories in shared mode and skip the wrapper entirely, but the point
of this change is to not change semantics or fix filesystems that
haven't been fixed in the last 7+ years, but to finally get rid of the
dual iterators.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

proc: fix missing conversion to 'iterate_shared'

I'm looking at the directory handling due to the discussion about f_pos
locking (see commit 797964253d35: "file: reinstate f_pos locking
optimization for regular files"), and wanting to clean that up.

And one source of ugliness is how we were supposed to move filesystems
over to the '->iterate_shared()' function that only takes the inode lock
for reading many many years ago, but several filesystems still use the
bad old '->iterate()' that takes the inode lock for exclusive access.

See commit 6192269444eb ("introduce a parallel variant of ->iterate()")
that also added some documentation stating

      Old method is only used if the new one is absent; eventually it will
      be removed.  Switch while you still can; the old one won't stay.

and that was back in April 2016.  Here we are, many years later, and the
old version is still clearly sadly alive and well.

Now, some of those old style iterators are probably just because the
filesystem may end up having per-inode mutable data that it uses for
iterating a directory, but at least one case is just a mistake.

Al switched over most filesystems to use '->iterate_shared()' back when
it was introduced.  In particular, the /proc filesystem was converted as
one of the first ones in commit f50752eaa0b0 ("switch all procfs
directories ->iterate_shared()").

But then later one new user of '->iterate()' was then re-introduced by
commit 6d9c939dbe4d ("procfs: add smack subdir to attrs").

And that's clearly not what we wanted, since that new case just uses the
same 'proc_pident_readdir()' and 'proc_pident_lookup()' helper functions
that other /proc pident directories use, and they are most definitely
safe to use with the inode lock held shared.

So just fix it.

This still leaves a fair number of oddball filesystems using the
old-style directory iterator (ceph, coda, exfat, jfs, ntfs, ocfs2,
overlayfs, and vboxsf), but at least we don't have any remaining in the
core filesystems.

I'm going to add a wrapper function that just drops the read-lock and
takes it as a write lock, so that we can clean up the core vfs layer and
make all the ugly 'this filesystem needs exclusive inode locking' be
just filesystem-internal warts.

I just didn't want to make that conversion when we still had a core user
left.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

open: make RESOLVE_CACHED correctly test for O_TMPFILE

O_TMPFILE is actually __O_TMPFILE|O_DIRECTORY. This means that the old
fast-path check for RESOLVE_CACHED would reject all users passing
O_DIRECTORY with -EAGAIN, when in fact the intended test was to check
for __O_TMPFILE.

Cc: stable@vger.kernel.org # v5.12+
Fixes: 99668f618062 ("fs: expose LOOKUP_CACHED through openat2() RESOLVE_CACHED")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Message-Id: <20230806-resolve_cached-o_tmpfile-v1-1-7ba16308465e@cyphar.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Merge tag 'rust-fixes-6.5-rc5' of https://github.com/Rust-for-Linux/linux

Pull rust fixes from Miguel Ojeda:

- Allocator: prevent mis-aligned allocation

- Types: delete 'ForeignOwnable::borrow_mut'. A sound replacement is
   planned for the merge window

- Build: fix bindgen error with UBSAN_BOUNDS_STRICT

* tag 'rust-fixes-6.5-rc5' of https://github.com/Rust-for-Linux/linux:
  rust: fix bindgen build error with UBSAN_BOUNDS_STRICT
  rust: delete `ForeignOwnable::borrow_mut`
  rust: allocator: Prevent mis-aligned allocation

Merge tag 'ata-6.5-rc5' of git://git./linux/kernel/git/dlemoal/libata

Pull ata fix from Damien Le Moal:

- Prevent the scsi disk driver from issuing a START STOP UNIT command
   for ATA devices during system resume as this causes various issues
   reported by multiple users.

* tag 'ata-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata,scsi: do not issue START STOP UNIT on resume

Merge tag '6.5-rc4-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fix from Steve French:

- Fix DFS interlink problem (different namespace)

* tag '6.5-rc4-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix dfs link mount against w2k8

Merge tag 'powerpc-6.5-5' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- Fix vmemmap altmap boundary check which could cause memory hotunplug
   failure

- Create a dummy stackframe to fix ftrace stack unwind

- Fix secondary thread bringup for Book3E ELFv2 kernels

- Use early_ioremap/unmap() in via_calibrate_decr()

Thanks to Aneesh Kumar K.V, Benjamin Gray, Christophe Leroy, David
Hildenbrand, and Naveen N Rao.

* tag 'powerpc-6.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powermac: Use early_* IO variants in via_calibrate_decr()
  powerpc/64e: Fix secondary thread bringup for ELFv2 kernels
  powerpc/ftrace: Create a dummy stackframe to fix stack unwind
  powerpc/mm/altmap: Fix altmap boundary check

Merge tag 'parisc-for-6.5-rc5' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc architecture fixes from Helge Deller:

- early fixmap preallocation to fix boot failures on kernel >= 6.4

- remove DMA leftover code in parport_gsc

- drop old comments and code style fixes

* tag 'parisc-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: unaligned: Add required spaces after ','
  parport: gsc: remove DMA leftover code
  parisc: pci-dma: remove unused and dead EISA code and comment
  parisc/mm: preallocate fixmap page tables at init

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"A few clk driver fixes for some SoC clk drivers:

   - Change a usleep() to udelay() to avoid scheduling while atomic in
     the Amlogic PLL code

   - Revert a patch to the Mediatek MT8183 driver that caused an
     out-of-bounds write

   - Return the right error value when devm_of_iomap() fails in
     imx93_clocks_probe()

   - Constrain the Kconfig for the fixed mmio clk so that it depends on
     HAS_IOMEM and can't be compiled on architectures such as s390"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: fixed-mmio: make COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM
  clk: imx93: Propagate correct error in imx93_clocks_probe()
  clk: mediatek: mt8183: Add back SSPM related clocks
  clk: meson: change usleep_range() to udelay() for atomic context

Merge tag 'hyperv-fixes-signed-20230804' of git://git./linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:

- Fix a bug in a python script for Hyper-V (Ani Sinha)

- Workaround a bug in Hyper-V when IBT is enabled (Michael Kelley)

- Fix an issue parsing MP table when Linux runs in VTL2 (Saurabh
   Sengar)

- Several cleanup patches (Nischala Yelchuri, Kameron Carr, YueHaibing,
   ZhiHu)

* tag 'hyperv-fixes-signed-20230804' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  Drivers: hv: vmbus: Remove unused extern declaration vmbus_ontimer()
  x86/hyperv: add noop functions to x86_init mpparse functions
  vmbus_testing: fix wrong python syntax for integer value comparison
  x86/hyperv: fix a warning in mshyperv.h
  x86/hyperv: Disable IBT when hypercall page lacks ENDBR instruction
  x86/hyperv: Improve code for referencing hyperv_pcpu_input_arg
  Drivers: hv: Change hv_free_hyperv_page() to take void * argument

Merge tag 'riscv-for-linus-6.5-rc5' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

- A pair of fixes for build-related failures in the selftests

- A fix for a sparse warning in acpi_os_ioremap()

- A fix to restore the kernel PA offset in vmcoreinfo, to fix crash
   handling

* tag 'riscv-for-linus-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  Documentation: kdump: Add va_kernel_pa_offset for RISCV64
  riscv: Export va_kernel_pa_offset in vmcoreinfo
  RISC-V: ACPI: Fix acpi_os_ioremap to return iomem address
  selftests: riscv: Fix compilation error with vstate_exec_nolibc.c
  selftests/riscv: fix potential build failure during the "emit_tests" step

Merge tag 'pm-6.5-rc5' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fix from Rafael Wysocki:
"Fix a sparse warning triggered by the TPMI interface recently added to
the Intel RAPL power capping driver (Zhang Rui)"

* tag 'pm-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl: Fix a sparse warning in TPMI interface

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:
"More SVE/SME fixes for ptrace() and for the (potentially future) case
  where SME is implemented in hardware without SVE support"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/fpsimd: Sync and zero pad FPSIMD state for streaming SVE
  arm64/fpsimd: Sync FPSIMD state with SVE for SME only systems
  arm64/ptrace: Don't enable SVE when setting streaming SVE
  arm64/ptrace: Flush FP state when setting ZT0
  arm64/fpsimd: Clear SME state in the target task when setting the VL

Merge tag 'mtd/fixes-for-6.5-rc5' of git://git./linux/kernel/git/mtd/linux

Pull mtd fixes from Miquel Raynal:
"Raw NAND fixes:
   - fsl_upm: Fix an off-by one test in fun_exec_op()
   - Rockchip:
       - Align hwecc vs. raw page helper layouts
       - Fix oobfree offset and description
   - Meson: Fix OOB available bytes for ECC
   - Omap ELM: Fix incorrect type in assignment

  SPI-NOR fix:
   - Avoid holes in struct spi_mem_op

  Hyperbus fix:
   - Add Tudor as reviewer in MAINTAINERS

  SPI-NAND fixes:
   - Winbond and Toshiba: Fix ecc_get_status"

* tag 'mtd/fixes-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: fsl_upm: Fix an off-by one test in fun_exec_op()
  mtd: spi-nor: avoid holes in struct spi_mem_op
  MAINTAINERS: Add myself as reviewer for HYPERBUS
  mtd: rawnand: rockchip: Align hwecc vs. raw page helper layouts
  mtd: rawnand: rockchip: fix oobfree offset and description
  mtd: rawnand: meson: fix OOB available bytes for ECC
  mtd: rawnand: omap_elm: Fix incorrect type in assignment
  mtd: spinand: winbond: Fix ecc_get_status
  mtd: spinand: toshiba: Fix ecc_get_status

Merge tag 'drm-fixes-2023-08-04' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Small set of fixes this week, i915 and a few misc ones. I didn't see
  an amd pull so maybe next week it'll have a few more on that driver.

  ttm:
   - NULL ptr deref fix

  panel:
   - add missing MODULE_DEVICE_TABLE

  imx/ipuv3:
   - timing fix

  i915:
   - Fix bug in getting msg length in AUX CH registers handler
   - Gen12 AUX invalidation fixes
   - Fix premature release of request's reusable memory"

* tag 'drm-fixes-2023-08-04' of git://anongit.freedesktop.org/drm/drm:
  drm/panel: samsung-s6d7aa0: Add MODULE_DEVICE_TABLE
  drm/i915: Fix premature release of request's reusable memory
  drm/i915/gt: Support aux invalidation on all engines
  drm/i915/gt: Poll aux invalidation register bit on invalidation
  drm/i915/gt: Enable the CCS_FLUSH bit in the pipe control and in the CS
  drm/i915/gt: Rename flags with bit_group_X according to the datasheet
  drm/i915/gt: Ensure memory quiesced before invalidation
  drm/i915: Add the gen12_needs_ccs_aux_inv helper
  drm/i915/gt: Cleanup aux invalidation registers
  drm/i915/gvt: Fix bug in getting msg length in AUX CH registers handler
  drm/imx/ipuv3: Fix front porch adjustment upon hactive aligning
  drm/ttm: check null pointer before accessing when swapping

Merge tag 'ceph-for-6.5-rc5' of https://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
"Two patches to improve RBD exclusive lock interaction with
  osd_request_timeout option and another fix to reduce the potential for
  erroneous blocklisting -- this time in CephFS. All going to stable"

* tag 'ceph-for-6.5-rc5' of https://github.com/ceph/ceph-client:
  libceph: fix potential hang in ceph_osdc_notify()
  rbd: prevent busy loop when requesting exclusive lock
  ceph: defer stopping mdsc delayed_work

file: reinstate f_pos locking optimization for regular files

In commit 20ea1e7d13c1 ("file: always lock position for
FMODE_ATOMIC_POS") we ended up always taking the file pos lock, because
pidfd_getfd() could get a reference to the file even when it didn't have
an elevated file count due to threading of other sharing cases.

But Mateusz Guzik reports that the extra locking is actually measurable,
so let's re-introduce the optimization, and only force the locking for
directory traversal.

Directories need the lock for correctness reasons, while regular files
only need it for "POSIX semantics". Since pidfd_getfd() is about
debuggers etc special things that are _way_ outside of POSIX, we can
relax the rules for that case.

Reported-by: Mateusz Guzik <mjguzik@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/linux-fsdevel/20230803095311.ijpvhx3fyrbkasul@f/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm64/fpsimd: Sync and zero pad FPSIMD state for streaming SVE

We have a function sve_sync_from_fpsimd_zeropad() which is used by the
ptrace code to update the SVE state when the user writes to the the
FPSIMD register set. Currently this checks that the task has SVE
enabled but this will miss updates for tasks which have streaming SVE
enabled if SVE has not been enabled for the thread, also do the
conversion if the task has streaming SVE enabled.

Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-ssve-no-sve-v1-3-49df214bfb3e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64/fpsimd: Sync FPSIMD state with SVE for SME only systems

Currently we guard FPSIMD/SVE state conversions with a check for the system
supporting SVE but SME only systems may need to sync streaming mode SVE
state so add a check for SME support too. These functions are only used
by the ptrace code.

Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-ssve-no-sve-v1-2-49df214bfb3e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64/ptrace: Don't enable SVE when setting streaming SVE

Systems which implement SME without also implementing SVE are
architecturally valid but were not initially supported by the kernel,
unfortunately we missed one issue in the ptrace code.

The SVE register setting code is shared between SVE and streaming mode
SVE. When we set full SVE register state we currently enable TIF_SVE
unconditionally, in the case where streaming SVE is being configured on a
system that supports vanilla SVE this is not an issue since we always
initialise enough state for both vector lengths but on a system which only
support SME it will result in us attempting to restore the SVE vector
length after having set streaming SVE registers.

Fix this by making the enabling of SVE conditional on setting SVE vector
state. If we set streaming SVE state and SVE was not already enabled this
will result in a SVE access trap on next use of normal SVE, this will cause
us to flush our register state but this is fine since the only way to
trigger a SVE access trap would be to exit streaming mode which will cause
the in register state to be flushed anyway.

Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-ssve-no-sve-v1-1-49df214bfb3e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

rust: fix bindgen build error with UBSAN_BOUNDS_STRICT

With commit 2d47c6956ab3 ("ubsan: Tighten UBSAN_BOUNDS on GCC") if
CONFIG_UBSAN is enabled and gcc supports -fsanitize=bounds-strict, we
can trigger the following build error due to bindgen lacking support for
this additional build option:

BINDGEN rust/bindings/bindings_generated.rs
error: unsupported argument 'bounds-strict' to option '-fsanitize='

Fix by adding -fsanitize=bounds-strict to the list of skipped gcc flags
for bindgen.

Fixes: 2d47c6956ab3 ("ubsan: Tighten UBSAN_BOUNDS on GCC")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230711071914.133946-1-andrea.righi@canonical.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

rust: delete `ForeignOwnable::borrow_mut`

We discovered that the current design of `borrow_mut` is problematic.
This patch removes it until a better solution can be found.

Specifically, the current design gives you access to a `&mut T`, which
lets you change where the `ForeignOwnable` points (e.g., with
`core::mem::swap`). No upcoming user of this API intended to make that
possible, making all of them unsound.

Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Fixes: 0fc4424d24a2 ("rust: types: introduce `ForeignOwnable`")
Link: https://lore.kernel.org/r/20230706094615.3080784-1-aliceryhl@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

rust: allocator: Prevent mis-aligned allocation

Currently the rust allocator simply passes the size of the type Layout
to krealloc(), and in theory the alignment requirement from the type
Layout may be larger than the guarantee provided by SLAB, which means
the allocated object is mis-aligned.

Fix this by adjusting the allocation size to the nearest power of two,
which SLAB always guarantees a size-aligned allocation. And because Rust
guarantees that the original size must be a multiple of alignment and
the alignment must be a power of two, then the alignment requirement is
satisfied.

Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Co-developed-by: "Andreas Hindborg (Samsung)" <nmi@metaspace.dk>
Signed-off-by: "Andreas Hindborg (Samsung)" <nmi@metaspace.dk>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Cc: stable@vger.kernel.org # v6.1+
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Fixes: 247b365dc8dc ("rust: add `kernel` crate")
Link: https://github.com/Rust-for-Linux/linux/issues/974
Link: https://lore.kernel.org/r/20230730012905.643822-2-boqun.feng@gmail.com
[ Applied rewording of comment as discussed in the mailing list. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

Merge tag 'drm-intel-fixes-2023-08-03' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix bug in getting msg length in AUX CH registers handler [gvt] (Yan Zhao)
- Gen12 AUX invalidation fixes [gt] (Andi Shyti, Jonathan Cavitt)
- Fix premature release of request's reusable memory (Janusz Krzysztofik)

- Merge tag 'gvt-fixes-2023-08-02' of https://github.com/intel/gvt-linux into drm-intel-fixes (Tvrtko Ursulin)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZMtkxWGuUKpaRMmo@tursulin-desk

Merge tag 'drm-misc-fixes-2023-08-03' of ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes

A NULL pointer dereference fix for TTM, a timings fix for imx/ipuv3 and
the addition of a MODULE_DEVICE_TABLE for the samsung-s6d7aa0 panel.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ztfogof2dhtlvjwe73mvd2jp5kbldhkkav7k5culuseqblwpti@qfobohwx3c3j

Merge tag 'perf-tools-fixes-for-v6.5-2-2023-08-03' of git://git./linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Arnaldo Carvalho de Melo:

- Fix segfault in the powerpc specific arch_skip_callchain_idx
   function. The patch doing the reference count init/exit that went
   into 6.5 missed this function.

- Fix regression reading the arm64 PMU cpu slots in sysfs, a patch
   removing some code duplication ended up duplicating the /sysfs prefix
   for these files.

- Fix grouping of events related to topdown, addressing a regression on
   the CSV output produced by 'perf stat' noticed on the downstream tool
   toplev.

- Fix the uprobe_from_different_cu 'perf test' entry, it is failing
   when gcc isn't available, so we need to check that and skip the test
   if it is not installed.

* tag 'perf-tools-fixes-for-v6.5-2-2023-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  perf test parse-events: Test complex name has required event format
  perf pmus: Create placholder regardless of scanning core_only
  perf test uprobe_from_different_cu: Skip if there is no gcc
  perf parse-events: Only move force grouped evsels when sorting
  perf parse-events: When fixing group leaders always set the leader
  perf parse-events: Extra care around force grouped events
  perf callchain powerpc: Fix addr location init during arch_skip_callchain_idx function
  perf pmu arm64: Fix reading the PMU cpu slots in sysfs

Merge tag 'cxl-fixes-6.5-rc5' of git://git./linux/kernel/git/cxl/cxl

Pull cxl fixes from Vishal Verma:

- Fixup the Sanitixe device ABI that was merged for v6.5 to hide some
   sysfs files when the necessary support is missing. Update the ABI
   documentation around this as well.

* tag 'cxl-fixes-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/memdev: Only show sanitize sysfs files when supported
  cxl/memdev: Document security state in kern-doc
  cxl/memdev: Improve sanitize ABI descriptions

Merge tag 'net-6.5-rc5' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and wireless.

  Nothing scary here. Feels like the first wave of regressions from v6.5
  is addressed - one outstanding fix still to come in TLS for the
  sendpage rework.

  Current release - regressions:

   - udp: fix __ip_append_data()'s handling of MSG_SPLICE_PAGES

   - dsa: fix older DSA drivers using phylink

  Previous releases - regressions:

   - gro: fix misuse of CB in udp socket lookup

   - mlx5: unregister devlink params in case interface is down

   - Revert "wifi: ath11k: Enable threaded NAPI"

  Previous releases - always broken:

   - sched: cls_u32: fix match key mis-addressing

   - sched: bind logic fixes for cls_fw, cls_u32 and cls_route

   - add bound checks to a number of places which hand-parse netlink

   - bpf: disable preemption in perf_event_output helpers code

   - qed: fix scheduling in a tasklet while getting stats

   - avoid using APIs which are not hardirq-safe in couple of drivers,
     when we may be in a hard IRQ (netconsole)

   - wifi: cfg80211: fix return value in scan logic, avoid page
     allocator warning

   - wifi: mt76: mt7615: do not advertise 5 GHz on first PHY of MT7615D
     (DBDC)

  Misc:

   - drop handful of inactive maintainers, put some new in place"

* tag 'net-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (98 commits)
  MAINTAINERS: update TUN/TAP maintainers
  test/vsock: remove vsock_perf executable on `make clean`
  tcp_metrics: fix data-race in tcpm_suck_dst() vs fastopen
  tcp_metrics: annotate data-races around tm->tcpm_net
  tcp_metrics: annotate data-races around tm->tcpm_vals[]
  tcp_metrics: annotate data-races around tm->tcpm_lock
  tcp_metrics: annotate data-races around tm->tcpm_stamp
  tcp_metrics: fix addr_same() helper
  prestera: fix fallback to previous version on same major version
  udp: Fix __ip_append_data()'s handling of MSG_SPLICE_PAGES
  net/mlx5e: Set proper IPsec source port in L4 selector
  net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prio
  net/mlx5: fs_core: Make find_closest_ft more generic
  wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1()
  vxlan: Fix nexthop hash size
  ip6mr: Fix skb_under_panic in ip6mr_cache_report()
  s390/qeth: Don't call dev_close/dev_open (DOWN/UP)
  net: tap_open(): set sk_uid from current_fsuid()
  net: tun_chr_open(): set sk_uid from current_fsuid()
  net: dcb: choose correct policy to parse DCB_ATTR_BCN
  ...

MAINTAINERS: update TUN/TAP maintainers

Willem and Jason have agreed to take over the maintainer
duties for TUN/TAP, thank you!

There's an existing entry for TUN/TAP which only covers
the user mode Linux implementation.
Since we haven't heard from Maxim on the list for almost
a decade, extend that entry and take it over, rather than
adding a new one.

Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20230802182843.4193099-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Martin KaFai Lau says:

====================
pull-request: bpf 2023-08-03

We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 3 files changed, 37 insertions(+), 20 deletions(-).

The main changes are:

1) Disable preemption in perf_event_output helpers code,
   from Jiri Olsa

2) Add length check for SK_DIAG_BPF_STORAGE_REQ_MAP_FD parsing,
   from Lin Ma

3) Multiple warning splat fixes in cpumap from Hou Tao

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf, cpumap: Handle skb as well when clean up ptr_ring
  bpf, cpumap: Make sure kthread is running before map update returns
  bpf: Add length check for SK_DIAG_BPF_STORAGE_REQ_MAP_FD parsing
  bpf: Disable preemption in bpf_event_output
  bpf: Disable preemption in bpf_perf_event_output
====================

Link: https://lore.kernel.org/r/20230803181429.994607-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-2023-08-03' of git://git./linux/kernel/git/wireless/wireless

Kalle Valo says:

====================
wireless fixes for v6.5

We did some house cleaning in MAINTAINERS file so several patches
about that. Few regressions fixed and also fix some recently enabled
memcpy() warnings. Only small commits and nothing special standing
out.

* tag 'wireless-2023-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1()
  wifi: ray_cs: Replace 1-element array with flexible array
  MAINTAINERS: add Jeff as ath10k, ath11k and ath12k maintainer
  MAINTAINERS: wifi: mark mlw8k as orphan
  MAINTAINERS: wifi: mark b43 as orphan
  MAINTAINERS: wifi: mark zd1211rw as orphan
  MAINTAINERS: wifi: mark wl3501 as orphan
  MAINTAINERS: wifi: mark rndis_wlan as orphan
  MAINTAINERS: wifi: mark ar5523 as orphan
  MAINTAINERS: wifi: mark cw1200 as orphan
  MAINTAINERS: wifi: atmel: mark as orphan
  MAINTAINERS: wifi: rtw88: change Ping as the maintainer
  Revert "wifi: ath6k: silence false positive -Wno-dangling-pointer warning on GCC 12"
  wifi: cfg80211: Fix return value in scan logic
  Revert "wifi: ath11k: Enable threaded NAPI"
  MAINTAINERS: Update mwifiex maintainer list
  wifi: mt76: mt7615: do not advertise 5 GHz on first phy of MT7615D (DBDC)
====================

Link: https://lore.kernel.org/r/20230803140058.57476C433C9@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

test/vsock: remove vsock_perf executable on `make clean`

We forgot to add vsock_perf to the rm command in the `clean`
target, so now we have a left over after `make clean` in
tools/testing/vsock.

Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility")
Cc: AVKrasnov@sberdevices.ru
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://lore.kernel.org/r/20230803085454.30897-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'tcp_metrics-series-of-fixes'

Eric Dumazet says:

====================
tcp_metrics: series of fixes

This series contains a fix for addr_same() and various
data-race annotations.

We still have to address races over tm->tcpm_saddr and
tm->tcpm_daddr later.
====================

Link: https://lore.kernel.org/r/20230802131500.1478140-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_metrics: fix data-race in tcpm_suck_dst() vs fastopen

Whenever tcpm_new() reclaims an old entry, tcpm_suck_dst()
would overwrite data that could be read from tcp_fastopen_cache_get()
or tcp_metrics_fill_info().

We need to acquire fastopen_seqlock to maintain consistency.

For newly allocated objects, tcpm_new() can switch to kzalloc()
to avoid an extra fastopen_seqlock acquisition.

Fixes: 1fe4c481ba63 ("net-tcp: Fast Open client - cookie cache")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_metrics: annotate data-races around tm->tcpm_net

tm->tcpm_net can be read or written locklessly.

Instead of changing write_pnet() and read_pnet() and potentially
hurt performance, add the needed READ_ONCE()/WRITE_ONCE()
in tm_net() and tcpm_new().

Fixes: 849e8a0ca8d5 ("tcp_metrics: Add a field tcpm_net and verify it matches on lookup")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_metrics: annotate data-races around tm->tcpm_vals[]

tm->tcpm_vals[] values can be read or written locklessly.

Add needed READ_ONCE()/WRITE_ONCE() to document this,
and force use of tcp_metric_get() and tcp_metric_set()

Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_metrics: annotate data-races around tm->tcpm_lock

tm->tcpm_lock can be read or written locklessly.

Add needed READ_ONCE()/WRITE_ONCE() to document this.

Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_metrics: annotate data-races around tm->tcpm_stamp

tm->tcpm_stamp can be read or written locklessly.

Add needed READ_ONCE()/WRITE_ONCE() to document this.

Also constify tcpm_check_stamp() dst argument.

Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_metrics: fix addr_same() helper

Because v4 and v6 families use separate inetpeer trees (respectively
net->ipv4.peers and net->ipv6.peers), inetpeer_addr_cmp(a, b) assumes
a & b share the same family.

tcp_metrics use a common hash table, where entries can have different
families.

We must therefore make sure to not call inetpeer_addr_cmp()
if the families do not match.

Fixes: d39d14ffa24c ("net: Add helper function to compare inetpeer addresses")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

prestera: fix fallback to previous version on same major version

When both supported and previous version have the same major version,
and the firmwares are missing, the driver ends in a loop requesting the
same (previous) version over and over again:

    [   76.327413] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.1.img firmware, fall-back to previous 4.0 version
    [   76.339802] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.352162] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.364502] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.376848] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.389183] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.401522] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.413860] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.426199] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    ...

Fix this by inverting the check to that we aren't yet at the previous
version, and also check the minor version.

This also catches the case where both versions are the same, as it was
after commit bb5dbf2cc64d ("net: marvell: prestera: add firmware v4.0
support").

With this fix applied:

    [   88.499622] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.1.img firmware, fall-back to previous 4.0 version
    [   88.511995] Prestera DX 0000:01:00.0: failed to request previous firmware: mrvl/prestera/mvsw_prestera_fw-v4.0.img
    [   88.522403] Prestera DX: probe of 0000:01:00.0 failed with error -2

Fixes: 47f26018a414 ("net: marvell: prestera: try to load previous fw version")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Acked-by: Elad Nachman <enachman@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Taras Chornyi <taras.chornyi@plvision.eu>
Link: https://lore.kernel.org/r/20230802092357.163944-1-jonas.gorski@bisdn.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'nfsd-6.5-3' of git://git./linux/kernel/git/cel/linux

Pull nfsd fix from Chuck Lever:

- Fix tmpfs splice read support

* tag 'nfsd-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: Fix reading via splice

Merge tag 'erofs-for-6.5-rc5-fixes' of git://git./linux/kernel/git/xiang/erofs

Pull erofs fixes from Gao Xiang:

- Fix data corruption caused by insufficient decompression on
   deduplicated compressed extents

- Drop a useless s_magic checking in erofs_kill_sb()

* tag 'erofs-for-6.5-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: drop unnecessary WARN_ON() in erofs_kill_sb()
  erofs: fix wrong primary bvec selection on deduplicated extents

Merge tag 's390-6.5-4' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Heiko Carstens:

- Split kernel large page mappings into 4k mappings in case debug
   pagealloc is enabled again. This got accidentally removed by commit
   bb1520d581a3 ("s390/mm: start kernel with DAT enabled")

- Fix error handling in KVM's sthyi handling

- Add missing include to s390's uapi ptrace.h

- Update defconfigs

* tag 's390-6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/ptrace: add missing linux/const.h include
  KVM: s390: fix sthyi error handling
  s390: update defconfigs
  s390/vmem: split pages when debug pagealloc is enabled

arm64/ptrace: Flush FP state when setting ZT0

When setting ZT0 via ptrace we do not currently force a reload of the
floating point register state from memory, do that to ensure that the newly
set value gets loaded into the registers on next task execution.

The function was templated off the function for FPSIMD which due to our
providing the option of embedding a FPSIMD regset within the SVE regset
does not directly include the flush.

Fixes: f90b529bcbe5 ("arm64/sme: Implement ZT0 ptrace support")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-zt0-flush-v1-1-72e854eaf96e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64/fpsimd: Clear SME state in the target task when setting the VL

When setting SME vector lengths we clear TIF_SME to reenable SME traps,
doing a reallocation of the backing storage on next use. We do this using
clear_thread_flag() which operates on the current thread, meaning that when
setting the vector length via ptrace we may both not force traps for the
target task and force a spurious flush of any SME state that the tracing
task may have.

Clear the flag in the target task.

Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Reported-by: David Spickett <David.Spickett@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-tif-sme-v1-1-88312fd6fbfd@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

parisc: unaligned: Add required spaces after ','

Fix checkpatch warnings:
unaligned.c:475: ERROR: space required after that ','

Signed-off-by: Yu Han <hanyu001@208suo.com>
Signed-off-by: Helge Deller <deller@gmx.de>

parport: gsc: remove DMA leftover code

This driver does not actually work with DMA mode, but still tries
to call ISA DMA interface functions that are stubbed out on
parisc, resulting in a W=1 build warning:

drivers/parport/parport_gsc.c: In function 'parport_remove_chip':
drivers/parport/parport_gsc.c:389:20: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
389 | free_dma(p->dma);

Remove the corresponding code as a prerequisite for turning on -Wempty-body
by default in all kernels.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>

parisc: pci-dma: remove unused and dead EISA code and comment

Clearly, this code isn't needed, but it gives a false positive when
grepping the complete source tree for coherent_dma_mask.

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>

parisc/mm: preallocate fixmap page tables at init

Christoph Biedl reported early OOM on recent kernels:

    swapper: page allocation failure: order:0, mode:0x100(__GFP_ZERO),
nodemask=(null)
    CPU: 0 PID: 0 Comm: swapper Not tainted 6.3.0-rc4+ #16
    Hardware name: 9000/785/C3600
    Backtrace:
     [<10408594>] show_stack+0x48/0x5c
     [<10e152d8>] dump_stack_lvl+0x48/0x64
     [<10e15318>] dump_stack+0x24/0x34
     [<105cf7f8>] warn_alloc+0x10c/0x1c8
     [<105d068c>] __alloc_pages+0xbbc/0xcf8
     [<105d0e4c>] __get_free_pages+0x28/0x78
     [<105ad10c>] __pte_alloc_kernel+0x30/0x98
     [<10406934>] set_fixmap+0xec/0xf4
     [<10411ad4>] patch_map.constprop.0+0xa8/0xdc
     [<10411bb0>] __patch_text_multiple+0xa8/0x208
     [<10411d78>] patch_text+0x30/0x48
     [<1041246c>] arch_jump_label_transform+0x90/0xcc
     [<1056f734>] jump_label_update+0xd4/0x184
     [<1056fc9c>] static_key_enable_cpuslocked+0xc0/0x110
     [<1056fd08>] static_key_enable+0x1c/0x2c
     [<1011362c>] init_mem_debugging_and_hardening+0xdc/0xf8
     [<1010141c>] start_kernel+0x5f0/0xa98
     [<10105da8>] start_parisc+0xb8/0xe4

    Mem-Info:
    active_anon:0 inactive_anon:0 isolated_anon:0
     active_file:0 inactive_file:0 isolated_file:0
     unevictable:0 dirty:0 writeback:0
     slab_reclaimable:0 slab_unreclaimable:0
     mapped:0 shmem:0 pagetables:0
     sec_pagetables:0 bounce:0
     kernel_misc_reclaimable:0
     free:0 free_pcp:0 free_cma:0
    Node 0 active_anon:0kB inactive_anon:0kB active_file:0kB
inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB
mapped:0kB dirty:0kB writeback:0kB shmem:0kB
+writeback_tmp:0kB kernel_stack:0kB pagetables:0kB sec_pagetables:0kB
all_unreclaimable? no
    Normal free:0kB boost:0kB min:0kB low:0kB high:0kB
reserved_highatomic:0KB active_anon:0kB inactive_anon:0kB active_file:0kB
inactive_file:0kB unevictable:0kB writepending:0kB
+present:1048576kB managed:1039360kB mlocked:0kB bounce:0kB free_pcp:0kB
local_pcp:0kB free_cma:0kB
    lowmem_reserve[]: 0 0
    Normal: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB
0*1024kB 0*2048kB 0*4096kB = 0kB
    0 total pagecache pages
    0 pages in swap cache
    Free swap  = 0kB
    Total swap = 0kB
    262144 pages RAM
    0 pages HighMem/MovableOnly
    2304 pages reserved
    Backtrace:
     [<10411d78>] patch_text+0x30/0x48
     [<1041246c>] arch_jump_label_transform+0x90/0xcc
     [<1056f734>] jump_label_update+0xd4/0x184
     [<1056fc9c>] static_key_enable_cpuslocked+0xc0/0x110
     [<1056fd08>] static_key_enable+0x1c/0x2c
     [<1011362c>] init_mem_debugging_and_hardening+0xdc/0xf8
     [<1010141c>] start_kernel+0x5f0/0xa98
     [<10105da8>] start_parisc+0xb8/0xe4

    Kernel Fault: Code=15 (Data TLB miss fault) at addr 0f7fe3c0
    CPU: 0 PID: 0 Comm: swapper Not tainted 6.3.0-rc4+ #16
    Hardware name: 9000/785/C3600

This happens because patching static key code temporarily maps it via
fixmap and if it happens before page allocator is initialized set_fixmap()
cannot allocate memory using pte_alloc_kernel().

Make sure that fixmap page tables are preallocated early so that
pte_offset_kernel() in set_fixmap() never resorts to pte allocation.

Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Tested-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # v6.4+

udp: Fix __ip_append_data()'s handling of MSG_SPLICE_PAGES

__ip_append_data() can get into an infinite loop when asked to splice into
a partially-built UDP message that has more than the frag-limit data and up
to the MTU limit.  Something like:

        pipe(pfd);
        sfd = socket(AF_INET, SOCK_DGRAM, 0);
        connect(sfd, ...);
        send(sfd, buffer, 8161, MSG_CONFIRM|MSG_MORE);
        write(pfd[1], buffer, 8);
        splice(pfd[0], 0, sfd, 0, 0x4ffe0ul, 0);

where the amount of data given to send() is dependent on the MTU size (in
this instance an interface with an MTU of 8192).

The problem is that the calculation of the amount to copy in
__ip_append_data() goes negative in two places, and, in the second place,
this gets subtracted from the length remaining, thereby increasing it.

This happens when pagedlen > 0 (which happens for MSG_ZEROCOPY and
MSG_SPLICE_PAGES), because the terms in:

        copy = datalen - transhdrlen - fraggap - pagedlen;

then mostly cancel when pagedlen is substituted for, leaving just -fraggap.
This causes:

        length -= copy + transhdrlen;

to increase the length to more than the amount of data in msg->msg_iter,
which causes skb_splice_from_iter() to be unable to fill the request and it
returns less than 'copied' - which means that length never gets to 0 and we
never exit the loop.

Fix this by:

(1) Insert a note about the dodgy calculation of 'copy'.

(2) If MSG_SPLICE_PAGES, clear copy if it is negative from the above
     equation, so that 'offset' isn't regressed and 'length' isn't
     increased, which will mean that length and thus copy should match the
     amount left in the iterator.

(3) When handling MSG_SPLICE_PAGES, give a warning and return -EIO if
     we're asked to splice more than is in the iterator.  It might be
     better to not give the warning or even just give a 'short' write.

[!] Note that this ought to also affect MSG_ZEROCOPY, but MSG_ZEROCOPY
avoids the problem by simply assuming that everything asked for got copied,
not just the amount that was in the iterator.  This is a potential bug for
the future.

Fixes: 7ac7c987850c ("udp: Convert udp_sendpage() to use MSG_SPLICE_PAGES")
Reported-by: syzbot+f527b971b4bdc8e79f9e@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000881d0606004541d1@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/1420063.1690904933@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mlx5-ipsec-fixes'

Leon Romanovsky says:

====================
mlx5 IPsec fixes

The following patches are combination of Jianbo's work on IPsec eswitch mode
together with our internal review toward addition of TCP protocol selectors
support to IPSec packet offload.

Despite not-being fix, the first patch helps us to make second one more
clear, so I'm asking to apply it anyway as part of this series.
====================

Link: https://lore.kernel.org/r/cover.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5e: Set proper IPsec source port in L4 selector

Fix typo in setup_fte_upper_proto_match() where destination UDP port
was used instead of source port.

Fixes: a7385187a386 ("net/mlx5e: IPsec, support upper protocol selector field offload")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/ffc024a4d192113103f392b0502688366ca88c1f.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prio

In the cited commit, new type of FS_TYPE_PRIO_CHAINS fs_prio was added
to support multiple parallel namespaces for multi-chains. And we skip
all the flow tables under the fs_node of this type unconditionally,
when searching for the next or previous flow table to connect for a
new table.

As this search function is also used for find new root table when the
old one is being deleted, it will skip the entire FS_TYPE_PRIO_CHAINS
fs_node next to the old root. However, new root table should be chosen
from it if there is any table in it. Fix it by skipping only the flow
tables in the same FS_TYPE_PRIO_CHAINS fs_node when finding the
closest FT for a fs_node.

Besides, complete the connecting from FTs of previous priority of prio
because there should be multiple prevs after this fs_prio type is
introduced. And also the next FT should be chosen from the first flow
table next to the prio in the same FS_TYPE_PRIO_CHAINS fs_prio, if
this prio is the first child.

Fixes: 328edb499f99 ("net/mlx5: Split FDB fast path prio to multiple namespaces")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/7a95754df479e722038996c97c97b062b372591f.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: fs_core: Make find_closest_ft more generic

As find_closest_ft_recursive is called to find the closest FT, the
first parameter of find_closest_ft can be changed from fs_prio to
fs_node. Thus this function is extended to find the closest FT for the
nodes of any type, not only prios, but also the sub namespaces.

Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/d3962c2b443ec8dde7a740dc742a1f052d5e256c.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'soc-fixes-6.5-2' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"A couple of platforms get a lone dts fix each:

   - SoCFPGA: Fix incorrect I2C property for SCL signal

   - Renesas: Fix interrupt names for MTU3 channels on RZ/G2L and
     RZ/V2L.

   - Juno/Vexpress: remove a dangling symlink

   - at91: sam9x60 SoC detection compatible strings

   - nspire: Fix arm primecell compatible string

  On the NXP i.MX platform, there multiple issues that get addressed:

   - A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU
     frequency of sk-imx53 board

   - Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux

   - A couple of imx8mm-venice fixes from Tim Harvey to diable
     disp_blk_ctrl

   - A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct
     VPU label and gpio-line-names

   - Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as
     bus_power_dev child, so that runtime PM can translate into the
     necessary GPC power domain action

  On the driver side, there are two fixes for tegra memory controller
  drivers addressing regressions from the merge window, a couple of
  minor correctness fixes for SCMI and SMCCC firmware, as well as a
  build fix for an lcd backlight driver"

* tag 'soc-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits)
  backlight: corgi_lcd: fix missing prototype
  memory: tegra: make icc_set_bw return zero if BWMGR not supported
  arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels
  dt-bindings: serial: atmel,at91-usart: update compatible for sam9x60
  ARM: dts: at91: sam9x60: fix the SOC detection
  ARM: dts: nspire: Fix arm primecell compatible string
  firmware: arm_scmi: Fix chan_free cleanup on SMC
  firmware: arm_scmi: Drop OF node reference in the transport channel setup
  soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child
  ARM: dts: nxp/imx: limit sk-imx53 supported frequencies
  firmware: arm_scmi: Fix signed error return values handling
  firmware: smccc: Fix use of uninitialised results structure
  arm64: dts: freescale: Fix VPU G2 clock
  arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux
  arm64: dts: phycore-imx8mm: Correction in gpio-line-names
  arm64: dts: phycore-imx8mm: Label typo-fix of VPU
  ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node
  arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl
  arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl
  arm64: dts: arm: Remove the dangling vexpress-v2m-rs1.dtsi symlink
  ...

Merge tag 'bitmap-6.5-rc5' of https://github.com:/norov/linux

Pull bitmap fixes from Yury Norov:

- Fix for bitmap documentation

- Fix for kernel build under certain configurations

* tag 'bitmap-6.5-rc5' of https://github.com:/norov/linux:
lib/bitmap: workaround const_eval test build failure
cpumask: eliminate kernel-doc warnings

Drivers: hv: vmbus: Remove unused extern declaration vmbus_ontimer()

Since commit 30fbee49b071 ("Staging: hv: vmbus: Get rid of the unused function vmbus_ontimer()")
this is not used anymore, so can remove it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230725142108.27280-1-yuehaibing@huawei.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>

x86/hyperv: add noop functions to x86_init mpparse functions

Hyper-V can run VMs at different privilege "levels" known as Virtual
Trust Levels (VTL). Sometimes, it chooses to run two different VMs
at different levels but they share some of their address space. In
such setups VTL2 (higher level VM) has visibility of all of the
VTL0 (level 0) memory space.

When the CONFIG_X86_MPPARSE is enabled for VTL2, the VTL2 kernel
performs a search within the low memory to locate MP tables. However,
in systems where VTL0 manages the low memory and may contain valid
tables, this scanning can result in incorrect MP table information
being provided to the VTL2 kernel, mistakenly considering VTL0's MP
table as its own

Add noop functions to avoid MP parse scan by VTL2.

Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/1687537688-5397-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>

Documentation: kdump: Add va_kernel_pa_offset for RISCV64

RISC-V Linux exports "va_kernel_pa_offset" in vmcoreinfo to help
Crash-utility translate the kernel virtual address correctly.

Here adds the definition of "va_kernel_pa_offset".

Fixes: 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping")
Link: https://lore.kernel.org/linux-riscv/20230724040649.220279-1-suagrfillet@gmail.com/
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230724100917.309061-2-suagrfillet@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Export va_kernel_pa_offset in vmcoreinfo

Since RISC-V Linux v6.4, the commit 3335068f8721 ("riscv: Use
PUD/P4D/PGD pages for the linear mapping") changes phys_ram_base
from the physical start of the kernel to the actual start of the DRAM.

The Crash-utility's VTOP() still uses phys_ram_base and kernel_map.virt_addr
to translate kernel virtual address, that failed the Crash with Linux v6.4 [1].

Export kernel_map.va_kernel_pa_offset in vmcoreinfo to help Crash translate
the kernel virtual address correctly.

Fixes: 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping")
Link: https://lore.kernel.org/linux-riscv/20230724040649.220279-1-suagrfillet@gmail.com/
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Reviewed-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230724100917.309061-1-suagrfillet@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V: ACPI: Fix acpi_os_ioremap to return iomem address

acpi_os_ioremap() currently is a wrapper to memremap() on
RISC-V. But the callers of acpi_os_ioremap() expect it to
return __iomem address and hence sparse tool reports a new
warning. Fix this issue by type casting to __iomem type.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307230357.egcTAefj-lkp@intel.com/
Fixes: a91a9ffbd3a5 ("RISC-V: Add support to build the ACPI core")
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230724100346.1302937-1-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

selftests: riscv: Fix compilation error with vstate_exec_nolibc.c

The following error happens:

In file included from vstate_exec_nolibc.c:2:
/usr/include/riscv64-linux-gnu/sys/prctl.h:42:12: error: conflicting types for ‘prctl’; h
ave ‘int(int, ...)’
   42 | extern int prctl (int __option, ...) __THROW;
      |            ^~~~~
In file included from ./../../../../include/nolibc/nolibc.h:99,
                 from <command-line>:
./../../../../include/nolibc/sys.h:892:5: note: previous definition of ‘prctl’ with type
‘int(int,  long unsigned int,  long unsigned int,  long unsigned int,  long unsigned int)
’
  892 | int prctl(int option, unsigned long arg2, unsigned long arg3,
      |     ^~~~~

Fix this by not including <sys/prctl.h>, which is not needed here since
prctl syscall is directly called using its number.

Fixes: 7cf6198ce22d ("selftests: Test RISC-V Vector prctl interface")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230713115829.110421-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

selftests/riscv: fix potential build failure during the "emit_tests" step

The riscv selftests (which were modeled after the arm64 selftests) are
improperly declaring the "emit_tests" target to depend upon the "all"
target. This approach, when combined with commit 9fc96c7c19df
("selftests: error out if kernel header files are not yet built"), has
caused build failures [1] on arm64, and is likely to cause similar
failures for riscv.

To fix this, simply remove the unnecessary "all" dependency from the
emit_tests target. The dependency is still effectively honored, because
again, invocation is via "install", which also depends upon "all".

An alternative approach would be to harden the emit_tests target so that
it can depend upon "all", but that's a lot more complicated and hard to
get right, and doesn't seem worth it, especially given that emit_tests
should probably not be overridden at all.

[1] https://lore.kernel.org/20230710-kselftest-fix-arm64-v1-1-48e872844f25@kernel.org

Fixes: 9fc96c7c19df ("selftests: error out if kernel header files are not yet built")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230712193514.740033-1-jhubbard@nvidia.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge tag 'exfat-for-6.5-rc5' of git://git./linux/kernel/git/linkinjeon/exfat

Pull exfat fixes from Namjae Jeon:

- Fix page allocation failure from allocation bitmap by using
   kvmalloc_array/kvfree

- Add the check to validate if filename entries exceeds max filename
   length

- Fix potential deadlock condition from dir_emit*()

* tag 'exfat-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: release s_lock before calling dir_emit()
  exfat: check if filename entries exceeds max filename length
  exfat: use kvmalloc_array/kvfree instead of kmalloc_array/kfree

smb: client: fix dfs link mount against w2k8

Customer reported that they couldn't mount their DFS link that was
seen by the client as a DFS interlink -- special form of DFS link
where its single target may point to a different DFS namespace -- and
it turned out that it was just a regular DFS link where its referral
header flags missed the StorageServers bit thus making the client
think it couldn't tree connect to target directly without requiring
further referrals.

When the DFS link referral header flags misses the StoraServers bit
and its target doesn't respond to any referrals, then tree connect to
it.

Fixes: a1c0d00572fc ("cifs: share dfs connections and supers")
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Three small fixes, all in drivers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: pm80xx: Fix error return code in pm8001_pci_probe()
  scsi: zfcp: Defer fc_rport blocking until after ADISC response
  scsi: storvsc: Limit max_sectors for virtual Fibre Channel devices

word-at-a-time: use the same return type for has_zero regardless of endianness

Compiling big-endian targets with Clang produces the diagnostic:

  fs/namei.c:2173:13: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
} while (!(has_zero(a, &adata, &constants) | has_zero(b, &bdata, &constants)));
          ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                                               ||
  fs/namei.c:2173:13: note: cast one or both operands to int to silence this warning

It appears that when has_zero was introduced, two definitions were
produced with different signatures (in particular different return
types).

Looking at the usage in hash_name() in fs/namei.c, I suspect that
has_zero() is meant to be invoked twice per while loop iteration; using
logical-or would not update `bdata` when `a` did not have zeros.  So I
think it's preferred to always return an unsigned long rather than a
bool than update the while loop in hash_name() to use a logical-or
rather than bitwise-or.

[ Also changed powerpc version to do the same  - Linus ]

Link: https://github.com/ClangBuiltLinux/linux/issues/1832
Link: https://lore.kernel.org/lkml/20230801-bitwise-v1-1-799bec468dc4@google.com/
Fixes: 36126f8f2ed8 ("word-at-a-time: make the interfaces truly generic")
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc/powermac: Use early_* IO variants in via_calibrate_decr()

On a powermac platform, via the call path:

  start_kernel()
    time_init()
      ppc_md.calibrate_decr() (pmac_calibrate_decr)
        via_calibrate_decr()

ioremap() and iounmap() are called. The unmap can enable interrupts
unexpectedly (cond_resched() in vunmap_pmd_range()), which causes a
warning later in the boot sequence in start_kernel().

Use the early_* variants of these IO functions to prevent this.

The issue is pre-existing, but is surfaced by commit 721255b9826b
("genirq: Use a maple tree for interrupt descriptor management").

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230706010816.72682-1-bgray@linux.ibm.com

wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1()

Using brcmfmac with 6.5-rc3 on a brcmfmac43241b4-sdio triggers
a backtrace caused by the following field-spanning warning:

memcpy: detected field-spanning write (size 120) of single field
"&params_le->channel_list[0]" at
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:1072 (size 2)

The driver still works after this warning. The warning was introduced by the
new field-spanning write checks which were enabled recently.

Fix this by replacing the channel_list[1] declaration at the end of
the struct with a flexible array declaration.

Most users of struct brcmf_scan_params_le calculate the size to alloc
using the size of the non flex-array part of the struct + needed extra
space, so they do not care about sizeof(struct brcmf_scan_params_le).

brcmf_notify_escan_complete() however uses the struct on the stack,
expecting there to be room for at least 1 entry in the channel-list
to store the special -1 abort channel-id.

To make this work use an anonymous union with a padding member
added + the actual channel_list flexible array.

Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230729140500.27892-1-hdegoede@redhat.com

vxlan: Fix nexthop hash size

The nexthop code expects a 31 bit hash, such as what is returned by
fib_multipath_hash() and rt6_multipath_hash(). Passing the 32 bit hash
returned by skb_get_hash() can lead to problems related to the fact that
'int hash' is a negative number when the MSB is set.

In the case of hash threshold nexthop groups, nexthop_select_path_hthr()
will disproportionately select the first nexthop group entry. In the case
of resilient nexthop groups, nexthop_select_path_res() may do an out of
bounds access in nh_buckets[], for example:
    hash = -912054133
    num_nh_buckets = 2
    bucket_index = 65535

which leads to the following panic:

BUG: unable to handle page fault for address: ffffc900025910c8
PGD 100000067 P4D 100000067 PUD 10026b067 PMD 0
Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI
CPU: 4 PID: 856 Comm: kworker/4:3 Not tainted 6.5.0-rc2+ #34
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:nexthop_select_path+0x197/0xbf0
Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85
RSP: 0018:ffff88810c36f260 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77
RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8
RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219
R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0
R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900
FS:  0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc900025910c8 CR3: 0000000129d00000 CR4: 0000000000750ee0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x1ee/0x5c0
? __pfx_is_prefetch.constprop.0+0x10/0x10
? __pfx_page_fault_oops+0x10/0x10
? search_bpf_extables+0xfe/0x1c0
? fixup_exception+0x3b/0x470
? exc_page_fault+0xf6/0x110
? asm_exc_page_fault+0x26/0x30
? nexthop_select_path+0x197/0xbf0
? nexthop_select_path+0x197/0xbf0
? lock_is_held_type+0xe7/0x140
vxlan_xmit+0x5b2/0x2340
? __lock_acquire+0x92b/0x3370
? __pfx_vxlan_xmit+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
? __pfx_register_lock_class+0x10/0x10
? skb_network_protocol+0xce/0x2d0
? dev_hard_start_xmit+0xca/0x350
? __pfx_vxlan_xmit+0x10/0x10
dev_hard_start_xmit+0xca/0x350
__dev_queue_xmit+0x513/0x1e20
? __pfx___dev_queue_xmit+0x10/0x10
? __pfx_lock_release+0x10/0x10
? mark_held_locks+0x44/0x90
? skb_push+0x4c/0x80
? eth_header+0x81/0xe0
? __pfx_eth_header+0x10/0x10
? neigh_resolve_output+0x215/0x310
? ip6_finish_output2+0x2ba/0xc90
ip6_finish_output2+0x2ba/0xc90
? lock_release+0x236/0x3e0
? ip6_mtu+0xbb/0x240
? __pfx_ip6_finish_output2+0x10/0x10
? find_held_lock+0x83/0xa0
? lock_is_held_type+0xe7/0x140
ip6_finish_output+0x1ee/0x780
ip6_output+0x138/0x460
? __pfx_ip6_output+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
? __pfx_ip6_finish_output+0x10/0x10
NF_HOOK.constprop.0+0xc0/0x420
? __pfx_NF_HOOK.constprop.0+0x10/0x10
? ndisc_send_skb+0x2c0/0x960
? __pfx_lock_release+0x10/0x10
? __local_bh_enable_ip+0x93/0x110
? lock_is_held_type+0xe7/0x140
ndisc_send_skb+0x4be/0x960
? __pfx_ndisc_send_skb+0x10/0x10
? mark_held_locks+0x65/0x90
? find_held_lock+0x83/0xa0
ndisc_send_ns+0xb0/0x110
? __pfx_ndisc_send_ns+0x10/0x10
addrconf_dad_work+0x631/0x8e0
? lock_acquire+0x180/0x3f0
? __pfx_addrconf_dad_work+0x10/0x10
? mark_held_locks+0x24/0x90
process_one_work+0x582/0x9c0
? __pfx_process_one_work+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? mark_held_locks+0x24/0x90
worker_thread+0x93/0x630
? __kthread_parkme+0xdc/0x100
? __pfx_worker_thread+0x10/0x10
kthread+0x1a5/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
RIP: 0000:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0000:0000000000000000 EFLAGS: 00000000 ORIG_RAX: 0000000000000000
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Modules linked in:
CR2: ffffc900025910c8
---[ end trace 0000000000000000 ]---
RIP: 0010:nexthop_select_path+0x197/0xbf0
Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85
RSP: 0018:ffff88810c36f260 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77
RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8
RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219
R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0
R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900
FS:  0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 0000000129d00000 CR4: 0000000000750ee0
PKRU: 55555554
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: 0x2ca00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Fix this problem by ensuring the MSB of hash is 0 using a right shift - the
same approach used in fib_multipath_hash() and rt6_multipath_hash().

Fixes: 1274e1cc4226 ("vxlan: ecmp support for mac fdb entries")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6mr: Fix skb_under_panic in ip6mr_cache_report()

skbuff: skb_under_panic: text:ffffffff88771f69 len:56 put:-4
head:ffff88805f86a800 data:ffff887f5f86a850 tail:0x88 end:0x2c0 dev:pim6reg
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:192!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 2 PID: 22968 Comm: kworker/2:11 Not tainted 6.5.0-rc3-00044-g0a8db05b571a #236
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:skb_panic+0x152/0x1d0
Call Trace:
  <TASK>
  skb_push+0xc4/0xe0
  ip6mr_cache_report+0xd69/0x19b0
  reg_vif_xmit+0x406/0x690
  dev_hard_start_xmit+0x17e/0x6e0
  __dev_queue_xmit+0x2d6a/0x3d20
  vlan_dev_hard_start_xmit+0x3ab/0x5c0
  dev_hard_start_xmit+0x17e/0x6e0
  __dev_queue_xmit+0x2d6a/0x3d20
  neigh_connected_output+0x3ed/0x570
  ip6_finish_output2+0x5b5/0x1950
  ip6_finish_output+0x693/0x11c0
  ip6_output+0x24b/0x880
  NF_HOOK.constprop.0+0xfd/0x530
  ndisc_send_skb+0x9db/0x1400
  ndisc_send_rs+0x12a/0x6c0
  addrconf_dad_completed+0x3c9/0xea0
  addrconf_dad_work+0x849/0x1420
  process_one_work+0xa22/0x16e0
  worker_thread+0x679/0x10c0
  ret_from_fork+0x28/0x60
  ret_from_fork_asm+0x11/0x20

When setup a vlan device on dev pim6reg, DAD ns packet may sent on reg_vif_xmit().
reg_vif_xmit()
    ip6mr_cache_report()
        skb_push(skb, -skb_network_offset(pkt));//skb_network_offset(pkt) is 4
And skb_push declared as:
void *skb_push(struct sk_buff *skb, unsigned int len);
skb->data -= len;
//0xffff88805f86a84c - 0xfffffffc = 0xffff887f5f86a850
skb->data is set to 0xffff887f5f86a850, which is invalid mem addr, lead to skb_push() fails.

Fixes: 14fb64e1f449 ("[IPV6] MROUTE: Support PIM-SM (SSM).")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s390/qeth: Don't call dev_close/dev_open (DOWN/UP)

dev_close() and dev_open() are issued to change the interface state to DOWN
or UP (dev->flags IFF_UP). When the netdev is set DOWN it loses e.g its
Ipv6 addresses and routes. We don't want this in cases of device recovery
(triggered by hardware or software) or when the qeth device is set
offline.

Setting a qeth device offline or online and device recovery actions call
netif_device_detach() and/or netif_device_attach(). That will reset or
set the LOWER_UP indication i.e. change the dev->state Bit
__LINK_STATE_PRESENT. That is enough to e.g. cause bond failovers, and
still preserves the interface settings that are handled by the network
stack.

Don't call dev_open() nor dev_close() from the qeth device driver. Let the
network stack handle this.

Fixes: d4560150cb47 ("s390/qeth: call dev_close() during recovery")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'tun-tap-uid'

Laszlo Ersek says:

====================
tun/tap: set sk_uid from current_fsuid()

The original patches fixing CVE-2023-1076 are incorrect in my opinion.
This small series fixes them up; see the individual commit messages for
explanation.

I have a very elaborate test procedure demonstrating the problem for
both tun and tap; it involves libvirt, qemu, and "crash". I can share
that procedure if necessary, but it's indeed quite long (I wrote it
originally for our QE team).

The patches in this series are supposed to "re-fix" CVE-2023-1076; given
that said CVE is classified as Low Impact (CVSSv3=5.5), I'm posting this
publicly, and not suggesting any embargo. Red Hat Product Security may
assign a new CVE number later.

I've tested the patches on top of v6.5-rc4, with "crash" built at commit
c74f375e0ef7.

Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pietro Borrello <borrello@diag.uniroma1.it>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: tap_open(): set sk_uid from current_fsuid()

Commit 66b2c338adce initializes the "sk_uid" field in the protocol socket
(struct sock) from the "/dev/tapX" device node's owner UID. Per original
commit 86741ec25462 ("net: core: Add a UID field to struct sock.",
2016-11-04), that's wrong: the idea is to cache the UID of the userspace
process that creates the socket. Commit 86741ec25462 mentions socket() and
accept(); with "tap", the action that creates the socket is
open("/dev/tapX").

Therefore the device node's owner UID is irrelevant. In most cases,
"/dev/tapX" will be owned by root, so in practice, commit 66b2c338adce has
no observable effect:

- before, "sk_uid" would be zero, due to undefined behavior
(CVE-2023-1076),

- after, "sk_uid" would be zero, due to "/dev/tapX" being owned by root.

What matters is the (fs)UID of the process performing the open(), so cache
that in "sk_uid".

Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pietro Borrello <borrello@diag.uniroma1.it>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 66b2c338adce ("tap: tap_open(): correctly initialize socket uid")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2173435
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: tun_chr_open(): set sk_uid from current_fsuid()

Commit a096ccca6e50 initializes the "sk_uid" field in the protocol socket
(struct sock) from the "/dev/net/tun" device node's owner UID. Per
original commit 86741ec25462 ("net: core: Add a UID field to struct
sock.", 2016-11-04), that's wrong: the idea is to cache the UID of the
userspace process that creates the socket. Commit 86741ec25462 mentions
socket() and accept(); with "tun", the action that creates the socket is
open("/dev/net/tun").

Therefore the device node's owner UID is irrelevant. In most cases,
"/dev/net/tun" will be owned by root, so in practice, commit a096ccca6e50
has no observable effect:

- before, "sk_uid" would be zero, due to undefined behavior
(CVE-2023-1076),

- after, "sk_uid" would be zero, due to "/dev/net/tun" being owned by root.

What matters is the (fs)UID of the process performing the open(), so cache
that in "sk_uid".

Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pietro Borrello <borrello@diag.uniroma1.it>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: a096ccca6e50 ("tun: tun_chr_open(): correctly initialize socket uid")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2173435
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drm/panel: samsung-s6d7aa0: Add MODULE_DEVICE_TABLE

The driver can be built as a module, however the lack of the
MODULE_DEVICE_TABLE macro prevents it from being automatically probed
from the DT in such case.

Add the missed macro to make sure the module can load automatically.

Fixes: 6810bb390282 ("drm/panel: Add Samsung S6D7AA0 panel controller driver")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Acked-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802-gt5-panel-dtable-v1-1-c0a765c175e2@trvn.ru

ata,scsi: do not issue START STOP UNIT on resume

During system resume, ata_port_pm_resume() triggers ata EH to
1) Resume the controller
2) Reset and rescan the ports
3) Revalidate devices
This EH execution is started asynchronously from ata_port_pm_resume(),
which means that when sd_resume() is executed, none or only part of the
above processing may have been executed. However, sd_resume() issues a
START STOP UNIT to wake up the drive from sleep mode. This command is
translated to ATA with ata_scsi_start_stop_xlat() and issued to the
device. However, depending on the state of execution of the EH process
and revalidation triggerred by ata_port_pm_resume(), two things may
happen:
1) The START STOP UNIT fails if it is received before the controller has
   been reenabled at the beginning of the EH execution. This is visible
   with error messages like:

ata10.00: device reported invalid CHS sector 0
sd 9:0:0:0: [sdc] Start/Stop Unit failed: Result: hostbyte=DID_OK driverbyte=DRIVER_OK
sd 9:0:0:0: [sdc] Sense Key : Illegal Request [current]
sd 9:0:0:0: [sdc] Add. Sense: Unaligned write command
sd 9:0:0:0: PM: dpm_run_callback(): scsi_bus_resume+0x0/0x90 returns -5
sd 9:0:0:0: PM: failed to resume async: error -5

2) The START STOP UNIT command is received while the EH process is
   on-going, which mean that it is stopped and must wait for its
   completion, at which point the command is rather useless as the drive
   is already fully spun up already. This case results also in a
   significant delay in sd_resume() which is observable by users as
   the entire system resume completion is delayed.

Given that ATA devices will be woken up by libata activity on resume,
sd_resume() has no need to issue a START STOP UNIT command, which solves
the above mentioned problems. Do not issue this command by introducing
the new scsi_device flag no_start_on_resume and setting this flag to 1
in ata_scsi_dev_config(). sd_resume() is modified to issue a START STOP
UNIT command only if this flag is not set.

Reported-by: Paul Ausbeck <paula@soe.ucsc.edu>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=215880
Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Tanner Watkins <dalzot@gmail.com>
Tested-by: Paul Ausbeck <paula@soe.ucsc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>

Merge tag 'gvt-fixes-2023-08-02' of https://github.com/intel/gvt-linux into drm-intel-fixes

gvt-fixes-2023-08-02

- Fix bug to get AUX CH register message length (Yan)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZMnvf46JqgeIuTir@debian-scheme