framework/connectivity/connman.git
13 years agoTODO: IPv6 gateway handling done.
Jukka Rissanen [Wed, 22 Jun 2011 10:37:50 +0000 (13:37 +0300)]
TODO: IPv6 gateway handling done.

13 years agonetwork: Clear IPv6 autoconfigured routes when disconnected.
Jukka Rissanen [Wed, 22 Jun 2011 10:37:49 +0000 (13:37 +0300)]
network: Clear IPv6 autoconfigured routes when disconnected.

13 years agoipconfig: Added function to enable IPv6.
Jukka Rissanen [Wed, 22 Jun 2011 10:37:48 +0000 (13:37 +0300)]
ipconfig: Added function to enable IPv6.

13 years agonetwork: Clear interface addresses after removing gateway address.
Jukka Rissanen [Wed, 22 Jun 2011 10:37:47 +0000 (13:37 +0300)]
network: Clear interface addresses after removing gateway address.

The reason for this patch is that service disconnect code path
is different from service change code path. In disconnect,
the __connman_ipconfig_address_remove() is called which clears the
addresses from interface. When changing from one service to another,
the function __connman_service_disconnect() is not called and thus
the interface address is not removed.
We cannot call __connman_ipconfig_address_remove() yet at this point
because it would clear addresses from internal data structures so we
use __connman_ipconfig_address_unset() instead.

13 years agoipconfig: Add function to remove address from interface.
Jukka Rissanen [Wed, 22 Jun 2011 10:37:46 +0000 (13:37 +0300)]
ipconfig: Add function to remove address from interface.

The new function removes the address from interface but does not
touch internal data structures.

13 years agonetwork: Set manual IPv6 state and gateway.
Jukka Rissanen [Wed, 22 Jun 2011 10:37:45 +0000 (13:37 +0300)]
network: Set manual IPv6 state and gateway.

13 years agoconnection: Separate IPv4 and IPv6 gateway and routing handling.
Jukka Rissanen [Wed, 22 Jun 2011 10:37:44 +0000 (13:37 +0300)]
connection: Separate IPv4 and IPv6 gateway and routing handling.

13 years agonetwork: Add IPv6 associating state.
Jukka Rissanen [Wed, 22 Jun 2011 10:37:43 +0000 (13:37 +0300)]
network: Add IPv6 associating state.

13 years agoservice: Set and clear IPv6 nameserver addresses properly.
Jukka Rissanen [Wed, 22 Jun 2011 10:37:42 +0000 (13:37 +0300)]
service: Set and clear IPv6 nameserver addresses properly.

13 years agoinet: Added support functions for setting and clearing IPv6 gateway address.
Jukka Rissanen [Wed, 22 Jun 2011 10:37:41 +0000 (13:37 +0300)]
inet: Added support functions for setting and clearing IPv6 gateway address.

13 years agoservice: Fixed indentation.
Jukka Rissanen [Wed, 22 Jun 2011 10:37:40 +0000 (13:37 +0300)]
service: Fixed indentation.

13 years agoinet: Fixed indentation.
Jukka Rissanen [Wed, 22 Jun 2011 10:37:39 +0000 (13:37 +0300)]
inet: Fixed indentation.

13 years agoinet: Changed error prints to print the error string.
Jukka Rissanen [Wed, 22 Jun 2011 10:37:38 +0000 (13:37 +0300)]
inet: Changed error prints to print the error string.

13 years agoconfig: Provision service after adding new .config files.
Mohamed Abbas [Wed, 22 Jun 2011 17:53:04 +0000 (10:53 -0700)]
config: Provision service after adding new .config files.

For now if new .config files are added connman will create
new config and but do not provision existing services. This
patch will provision existing service if any config file are
added or modified.

Fixes bug #4880.

13 years agomain: Be quiet when config file isn't found
Lucas De Marchi [Tue, 21 Jun 2011 16:42:39 +0000 (13:42 -0300)]
main: Be quiet when config file isn't found

It's ok to run ConnMann without a configuration file, so don't print an
error message when this happens.

13 years agogweb: added the capability to restrict the requests to a specific address family.
Tomasz Bursztyka [Wed, 22 Jun 2011 06:28:54 +0000 (09:28 +0300)]
gweb: added the capability to restrict the requests to a specific address family.

13 years agowifi: Fix return value of wifi_[enable/disable].
Alok Barsode [Mon, 20 Jun 2011 11:06:12 +0000 (14:06 +0300)]
wifi: Fix return value of wifi_[enable/disable].

13 years agoRevert "service: Provide a function to query immutability"
Daniel Wagner [Mon, 27 Jun 2011 09:11:49 +0000 (11:11 +0200)]
Revert "service: Provide a function to query immutability"

This reverts commit 3092bccc020d84001dd23f76fdcb449069c8f657.

Unused interface.

Reported by Henri Bragge <henri.bragge@ixonos.com>

13 years agodevice: Fix an inbalance ref/unref of network objects
Daniel Wagner [Tue, 21 Jun 2011 14:45:50 +0000 (16:45 +0200)]
device: Fix an inbalance ref/unref of network objects

The destroy callback of the hash table (device->networks)
will unref and unregister the network object.

13 years agoTODO: DUN client
Daniel Wagner [Thu, 16 Jun 2011 14:06:25 +0000 (16:06 +0200)]
TODO: DUN client

13 years agotodo: connman_element removal done
Daniel Wagner [Thu, 16 Jun 2011 14:02:48 +0000 (16:02 +0200)]
todo: connman_element removal done

13 years agoprovider: Remove unnecessary additional check for NULL provider struct
Patrik Flykt [Fri, 17 Jun 2011 08:07:15 +0000 (11:07 +0300)]
provider: Remove unnecessary additional check for NULL provider struct

13 years agoservice: Use existing setup_ip*config functions when creating a service
Patrik Flykt [Thu, 16 Jun 2011 13:01:36 +0000 (16:01 +0300)]
service: Use existing setup_ip*config functions when creating a service

13 years agodoc: Update documentation regarding 'SessionMode' property.
Patrik Flykt [Thu, 16 Jun 2011 13:01:35 +0000 (16:01 +0300)]
doc: Update documentation regarding 'SessionMode' property.

13 years agoofono: Fix add_newtork() error path
daniel.wagner@bmw-carit.de [Tue, 21 Jun 2011 09:26:05 +0000 (11:26 +0200)]
ofono: Fix add_newtork() error path

After add_network() added the newly created network object
to the network_hash and add_netork() bails out with an
error the network_remove() callback will called from network.c.

Therefore we don't have to free the network object in
the error path of add_network(). It will be removed
by the network_remove() callback.

13 years agoagent: Unify request input callback for passphrase and login based input.
Tomasz Bursztyka [Tue, 14 Jun 2011 09:55:29 +0000 (12:55 +0300)]
agent: Unify request input callback for passphrase and login based input.

13 years agoagent: Add documentation about WISPr-enabled hotspot input request.
Tomasz Bursztyka [Tue, 14 Jun 2011 09:55:28 +0000 (12:55 +0300)]
agent: Add documentation about WISPr-enabled hotspot input request.

13 years agodevice: Do not return error for unhandled devices
daniel.wagner@bmw-carit.de [Mon, 20 Jun 2011 17:17:08 +0000 (19:17 +0200)]
device: Do not return error for unhandled devices

If device_probe returns an error for a device where no
driver has been registered, the device will be destroyed.
This happens when for example the wpa_supplicant is
started after ConnMan. In this case we don't have any
wifi device registered at the core when wpa_supplicant starts.

13 years agoAUTHORS: Mention Paulo's contributions
Samuel Ortiz [Fri, 17 Jun 2011 14:24:08 +0000 (16:24 +0200)]
AUTHORS: Mention Paulo's contributions

13 years agogsupplicant: Client certificate is not mandatory for TTLS/PEAP
Paolo Pellegrino [Fri, 17 Jun 2011 14:20:26 +0000 (16:20 +0200)]
gsupplicant: Client certificate is not mandatory for TTLS/PEAP

13 years agoproperty: Remove it
Daniel Wagner [Thu, 16 Jun 2011 07:44:54 +0000 (09:44 +0200)]
property: Remove it

13 years agoelement: Remove element.c
Daniel Wagner [Thu, 16 Jun 2011 07:44:53 +0000 (09:44 +0200)]
element: Remove element.c

13 years agotimeserver: Do not use element driver API
Daniel Wagner [Thu, 16 Jun 2011 11:29:39 +0000 (13:29 +0200)]
timeserver: Do not use element driver API

13 years agoprovider: Remove element code
Daniel Wagner [Thu, 16 Jun 2011 07:44:53 +0000 (09:44 +0200)]
provider: Remove element code

13 years agoelement: Remove network code
Daniel Wagner [Thu, 16 Jun 2011 07:44:53 +0000 (09:44 +0200)]
element: Remove network code

13 years agonetwork: Remove element code from connman_network_[set|get]_blob()
Daniel Wagner [Thu, 16 Jun 2011 08:15:46 +0000 (10:15 +0200)]
network: Remove element code from connman_network_[set|get]_blob()

13 years agonetwork: Use setter/getters for connman_network_set/get_uint16()
Daniel Wagner [Thu, 16 Jun 2011 07:44:53 +0000 (09:44 +0200)]
network: Use setter/getters for connman_network_set/get_uint16()

13 years agonetwork: Use setter/getters for connman_network_set/get_uint8()
Daniel Wagner [Thu, 16 Jun 2011 07:44:53 +0000 (09:44 +0200)]
network: Use setter/getters for connman_network_set/get_uint8()

13 years agonetwork: Remove element code from connman_network_[set|get]_bool()
Daniel Wagner [Thu, 16 Jun 2011 08:00:26 +0000 (10:00 +0200)]
network: Remove element code from connman_network_[set|get]_bool()

13 years agonetwork: Remove unused set type element
Daniel Wagner [Thu, 16 Jun 2011 07:57:35 +0000 (09:57 +0200)]
network: Remove unused set type element

13 years agonetwork: Remove element code from connman_network_[set|get]_string()
Daniel Wagner [Thu, 16 Jun 2011 07:47:42 +0000 (09:47 +0200)]
network: Remove element code from connman_network_[set|get]_string()

13 years agonetwork: Remove unused network_driver->setup()
Daniel Wagner [Thu, 16 Jun 2011 07:44:53 +0000 (09:44 +0200)]
network: Remove unused network_driver->setup()

13 years agoservice: Remove Service.Mode
Daniel Wagner [Thu, 16 Jun 2011 07:44:53 +0000 (09:44 +0200)]
service: Remove Service.Mode

The only source for the cellular mode update was removed in
a474ef1be8b76167b9d0ef8a9eb6fe24cc5eacc5". The WiFi plugin will not
support adhoc mode. So this property is completly unused.

13 years agowimax: Remove unused station_type
Daniel Wagner [Thu, 16 Jun 2011 07:44:53 +0000 (09:44 +0200)]
wimax: Remove unused station_type

And remove therefore the dependencie on connman_network_set_string().

13 years agowifi: Whitespace cleanup
Daniel Wagner [Thu, 16 Jun 2011 07:44:52 +0000 (09:44 +0200)]
wifi: Whitespace cleanup

13 years agoRelease 0.75
Marcel Holtmann [Wed, 15 Jun 2011 18:06:33 +0000 (11:06 -0700)]
Release 0.75

13 years agounit: Fix wrong include of common header
Marcel Holtmann [Wed, 15 Jun 2011 17:12:59 +0000 (10:12 -0700)]
unit: Fix wrong include of common header

13 years agobuild: Include unit/test-connman.h into source list
Marcel Holtmann [Wed, 15 Jun 2011 17:12:34 +0000 (10:12 -0700)]
build: Include unit/test-connman.h into source list

13 years agogsupplicant: Fix how raw key as psk are provided.
Tomasz Bursztyka [Sat, 11 Jun 2011 08:07:39 +0000 (11:07 +0300)]
gsupplicant: Fix how raw key as psk are provided.

13 years agoservice: Add timeout event only the first time
Yu A Wang [Thu, 9 Jun 2011 09:06:15 +0000 (05:06 -0400)]
service: Add timeout event only the first time

When connect to a 3G service with weak signal, it may connect
several times. When connman suspend to S3 and resume several
times, function remove_timeout only remove the last timeout event.
This will lead connman crash when connect_timeout invoked by other
timeout event to access previous already freed service.

13 years agodhcp: Cancel old renewal timeout prior to adding a new one
Grant Erickson [Thu, 2 Jun 2011 04:16:13 +0000 (21:16 -0700)]
dhcp: Cancel old renewal timeout prior to adding a new one

Given the following reproduction steps:

    1) Set up an access point with a Class B IP address, say
       10.2.40.254.
    2) Set up the access point to provide DHCP leases over a range
       10.2.40.2 through 10.2.40.253.
    3) Set up a short lease renewal period of 5-10 minutes.
    4) Allow the device to associate, connect and receive an IP
       address.
    5) Midway through the lease interval, change the access point to a
       different IP address, say, 10.2.41.254.
    6) Change the access point to issue DHCP leases over a new range,
       10.2.41.2 through 10.2.41.253.
    7) Watch as the access point resets, the connection is lost, the
       connection is regained and as connman tries to get a new DHCP
       lease.

Prior to commit 39825846, connman could receive a new but different
DHCP lease but connman would not program the confirmed lease to the
interface.

However, following that commit, it now programs the new, changed DHCP
lease to the interface but still believes the old lease is valid and
attempts to keep servicing the old renewal timeout for the prior but
now stale lease.

This patch cancels any existing, pending DHCP lease renewal timeout
following a DHCP lease configuration change.

13 years agoinet: Standardize error codes and messages
Grant Erickson [Fri, 10 Jun 2011 13:54:23 +0000 (15:54 +0200)]
inet: Standardize error codes and messages

Return and pass a consistent set of informative error codes and
display a consistent set of error messages for
connman_inet_modify_address and connman_{clear,set}_*_address.

13 years agogweb: Make debug for write simpler
Marcel Holtmann [Mon, 13 Jun 2011 20:12:44 +0000 (22:12 +0200)]
gweb: Make debug for write simpler

13 years agobuild: Add alg-test to ignore list
Marcel Holtmann [Mon, 13 Jun 2011 20:12:24 +0000 (22:12 +0200)]
build: Add alg-test to ignore list

13 years agobuild: Check for linux/if_alg.h if tools are enabled
Marcel Holtmann [Wed, 8 Jun 2011 08:29:01 +0000 (10:29 +0200)]
build: Check for linux/if_alg.h if tools are enabled

13 years agotools: Use sendfile() instead of mmap() for AF_ALG test utility
Marcel Holtmann [Wed, 8 Jun 2011 05:43:05 +0000 (07:43 +0200)]
tools: Use sendfile() instead of mmap() for AF_ALG test utility

13 years agotools: Add utility for testing AF_ALG kernel interface
Marcel Holtmann [Wed, 8 Jun 2011 05:28:16 +0000 (07:28 +0200)]
tools: Add utility for testing AF_ALG kernel interface

13 years agounit: Add free-ride test
Daniel Wagner [Tue, 7 Jun 2011 13:42:22 +0000 (15:42 +0200)]
unit: Add free-ride test

13 years agounit: Add session connect disconnect test
Daniel Wagner [Tue, 7 Jun 2011 13:42:22 +0000 (15:42 +0200)]
unit: Add session connect disconnect test

13 years agounit: Add session disconnect test
Daniel Wagner [Tue, 7 Jun 2011 13:42:22 +0000 (15:42 +0200)]
unit: Add session disconnect test

13 years agounit: Add session connect test
Daniel Wagner [Tue, 7 Jun 2011 13:42:22 +0000 (15:42 +0200)]
unit: Add session connect test

13 years agounit: Add create many session test
Daniel Wagner [Tue, 7 Jun 2011 13:42:22 +0000 (15:42 +0200)]
unit: Add create many session test

13 years agounit: Add create already exists test case
Daniel Wagner [Tue, 7 Jun 2011 13:42:22 +0000 (15:42 +0200)]
unit: Add create already exists test case

13 years agounit: Add create and destroy test case
Daniel Wagner [Tue, 7 Jun 2011 13:42:22 +0000 (15:42 +0200)]
unit: Add create and destroy test case

13 years agounit: Add init/cleanup util function
Daniel Wagner [Tue, 7 Jun 2011 13:42:22 +0000 (15:42 +0200)]
unit: Add init/cleanup util function

13 years agounit: Add create session test
Daniel Wagner [Tue, 7 Jun 2011 13:42:22 +0000 (15:42 +0200)]
unit: Add create session test

Create a complete session, that is with proper notification object.

13 years agounit: Add Session API binding
Daniel Wagner [Tue, 7 Jun 2011 13:42:22 +0000 (15:42 +0200)]
unit: Add Session API binding

13 years agounit: Add manager create/destroy tests
Daniel Wagner [Tue, 7 Jun 2011 13:42:22 +0000 (15:42 +0200)]
unit: Add manager create/destroy tests

Also add util function for creating the test fixture data structure.

13 years agounit: Toggle SessionMode for each test case
Daniel Wagner [Tue, 7 Jun 2011 13:42:21 +0000 (15:42 +0200)]
unit: Toggle SessionMode for each test case

13 years agounit: Add Manager API binding
Daniel Wagner [Tue, 7 Jun 2011 13:42:21 +0000 (15:42 +0200)]
unit: Add Manager API binding

13 years agounit: Add util function for unit tests
Daniel Wagner [Tue, 7 Jun 2011 13:42:21 +0000 (15:42 +0200)]
unit: Add util function for unit tests

13 years agounit: Add test-session
Daniel Wagner [Tue, 7 Jun 2011 13:42:21 +0000 (15:42 +0200)]
unit: Add test-session

13 years agoelement: Remove device code
Daniel Wagner [Thu, 2 Jun 2011 17:29:08 +0000 (19:29 +0200)]
element: Remove device code

13 years agoelement: Remove left overs from clean
Daniel Wagner [Thu, 2 Jun 2011 17:30:44 +0000 (19:30 +0200)]
element: Remove left overs from clean

13 years agodhcp: Fix dhcp_invalidate NULL pointer access
Daniel Wagner [Tue, 7 Jun 2011 07:54:25 +0000 (09:54 +0200)]
dhcp: Fix dhcp_invalidate NULL pointer access

dhcp->nameservers can be NULL. This can be triggered with toggling
the technologies switches fast enough.

13 years agoRelease 0.74
Marcel Holtmann [Thu, 2 Jun 2011 01:29:59 +0000 (03:29 +0200)]
Release 0.74

13 years agotethering: Fix small typo
Marcel Holtmann [Thu, 2 Jun 2011 00:40:21 +0000 (02:40 +0200)]
tethering: Fix small typo

13 years agotethering: Fix handling of undefined DBUS_TYPE_UNIX_FD
Marcel Holtmann [Thu, 2 Jun 2011 00:39:30 +0000 (02:39 +0200)]
tethering: Fix handling of undefined DBUS_TYPE_UNIX_FD

13 years agoAUTHORS: Mention Thierry's contributions
Samuel Ortiz [Tue, 31 May 2011 22:21:08 +0000 (00:21 +0200)]
AUTHORS: Mention Thierry's contributions

13 years agoTODO: D-Bus provisioning, private networks and v6v4 oFono support are done
Samuel Ortiz [Tue, 31 May 2011 22:19:22 +0000 (00:19 +0200)]
TODO: D-Bus provisioning, private networks and v6v4 oFono support are done

13 years agodhcp: Call ipconfig_address_remove from dhcp_invalidate
Samuel Ortiz [Tue, 31 May 2011 22:16:26 +0000 (00:16 +0200)]
dhcp: Call ipconfig_address_remove from dhcp_invalidate

Clearing the ipconfig fields is not enough, the actual rntl command needs
to be sent for the IP to be cleared.

13 years agonotifier: Limit Counter Underflow
Grant Erickson [Tue, 31 May 2011 20:01:24 +0000 (22:01 +0200)]
notifier: Limit Counter Underflow

When network and service events occur from the bottom up
(e.g. supplicant, link state, etc.) that also incur IP configuration
changes, it is possible for one or more of the notifier counters to
underflow, leaving connman in a state from which it can never recover
without a process restart.

By limiting underflow of the three notifier counters, these non-
recoverable states are prevented.

13 years agodhcp: Invalidate and Release on Network Removal
Grant Erickson [Tue, 31 May 2011 19:55:28 +0000 (21:55 +0200)]
dhcp: Invalidate and Release on Network Removal

When removing a network DHCP configuration, invalidate the DHCP
configuration in addition to releasing it.

This addresses a case in which a lower-level network event (e.g. Wi-Fi
disassociation triggered by the driver due to low signal strength)
causes a service disconnect not triggered by connman but then is
recovered BY connman to reuse the prior DHCP lease configuration but
not actually assign it by simply invalidating the old lease
configuration when connman removes the prior network.

13 years agoservice: Indicate IP Configuration Ready Event
Grant Erickson [Wed, 25 May 2011 17:10:17 +0000 (10:10 -0700)]
service: Indicate IP Configuration Ready Event

In the Connection Manager, completion of a valid IP configuration
excites the service state machine to move from the "configuration" to
the "ready" state.

However, the existing implementation of IP configuration completion
explicitly attempts to directly manipulate service state, rather than
hinting at an excitation event.

As a consequence, a late IP configuration completion after the service
state machine has transitioned from "ready" to "online" can lead to an
incorrect transition back to the "ready" state. This causes the
connection count for the technology associated with that service to
increment again, unnecessarily.

This patch avoids this issue by providing a service object interface
that simply hints that an IP configuration is complete for a given IP
type, allowing the service object and its state machine to either hold
fast in the present state, returning an advisory error or advancing,
as before.

All prior invocations of __connman_service_indicate_state outside of
the service module for the CONNMAN_SERVICE_STATE_READY are replaced
with calls to this new interface.

Thanks to Daniel Wagner and Marcel Holtmann for offline IRC discussion
that helped motivate this fix.

  * v2: Incorporated feedback from Samuel Ortiz about combining IPv4
        and IPv6 states before checking state readiness.

13 years agoipconfig: Add Function to Stringify ipconfig Type
Grant Erickson [Tue, 3 May 2011 16:15:16 +0000 (09:15 -0700)]
ipconfig: Add Function to Stringify ipconfig Type

13 years agodevice: Include Reason in Disconnect Skip Warning
Grant Erickson [Wed, 25 May 2011 06:39:55 +0000 (23:39 -0700)]
device: Include Reason in Disconnect Skip Warning

Include the reason for skipping the requested network disconnect in
the warning message.

13 years agodhcp: Remove extra dhcp_release call
Thierry Boureille [Mon, 30 May 2011 09:43:26 +0000 (11:43 +0200)]
dhcp: Remove extra dhcp_release call

dhcp_release will be called from the hash table remove callback, if the
network is found.

13 years agodevice: Do not use connman_element_set/get_string()
Daniel Wagner [Tue, 31 May 2011 15:43:49 +0000 (17:43 +0200)]
device: Do not use connman_element_set/get_string()

13 years agodevice: Handle connman_device_set/get_string(dev, "Path", ...) directly
Daniel Wagner [Tue, 31 May 2011 15:43:49 +0000 (17:43 +0200)]
device: Handle connman_device_set/get_string(dev, "Path", ...) directly

and don't rely on the element code.

13 years agoofono: Store Operator string in struct modem
Daniel Wagner [Tue, 31 May 2011 15:43:49 +0000 (17:43 +0200)]
ofono: Store Operator string in struct modem

So we don't rely on the connman_device_set/get_string().

13 years agoproperty: Remove CONNMAN_PROPERTY_ID_IPV6_*
Daniel Wagner [Tue, 31 May 2011 15:43:48 +0000 (17:43 +0200)]
property: Remove CONNMAN_PROPERTY_ID_IPV6_*

13 years agoproperty: Remove HOSTNAME and DOMAINNAME
Daniel Wagner [Tue, 31 May 2011 15:43:48 +0000 (17:43 +0200)]
property: Remove HOSTNAME and DOMAINNAME

13 years agoproperty: Remove unused CONNMAN_PROPERTY_ID_IPV4_*
Daniel Wagner [Tue, 31 May 2011 15:43:48 +0000 (17:43 +0200)]
property: Remove unused CONNMAN_PROPERTY_ID_IPV4_*

13 years agoelement: Remove IPv6
Daniel Wagner [Tue, 31 May 2011 15:43:48 +0000 (17:43 +0200)]
element: Remove IPv6

13 years agoelement: Remove IPv4
Daniel Wagner [Tue, 31 May 2011 15:43:48 +0000 (17:43 +0200)]
element: Remove IPv4

13 years agoelement: Remove connected failed code
Daniel Wagner [Tue, 31 May 2011 15:43:48 +0000 (17:43 +0200)]
element: Remove connected failed code

13 years agonetwork: Use __connman_service_indicate_error for connetion failed
Daniel Wagner [Tue, 31 May 2011 15:43:48 +0000 (17:43 +0200)]
network: Use __connman_service_indicate_error for connetion failed

13 years agoelement: Remove unused CONNMAN_ELEMENT_ERROR_DHCP_FAILED
Daniel Wagner [Tue, 31 May 2011 15:43:48 +0000 (17:43 +0200)]
element: Remove unused CONNMAN_ELEMENT_ERROR_DHCP_FAILED

13 years agoelement: Remove service code
Daniel Wagner [Tue, 31 May 2011 15:43:48 +0000 (17:43 +0200)]
element: Remove service code

13 years agoelement: Remove vendor code
Daniel Wagner [Tue, 31 May 2011 15:43:48 +0000 (17:43 +0200)]
element: Remove vendor code