platform/kernel/linux-exynos.git
16 years agopowerpc/e500mc: flush L2 on NAP for e500mc
Kumar Gala [Thu, 19 Jun 2008 14:40:31 +0000 (09:40 -0500)]
powerpc/e500mc: flush L2 on NAP for e500mc

If we have an L2CSR register (e500mc) we need to flush the L2 before going
to nap.  We use the HW flush mechanism provided in that register.

The code reuses the CPU_FTR_604_PERF_MON bit as it is no longer used by
any code in the kernel.  Additionally we didn't reuse the exist L2CR
feature bit as this is intended for the 7xxx L2CR register and L2CSR
is part of the new Freescale "Book-E" registers.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc/85xx: add DOZE/NAP support for e500 core
Kumar Gala [Wed, 18 Jun 2008 21:26:52 +0000 (16:26 -0500)]
powerpc/85xx: add DOZE/NAP support for e500 core

The e500 core enter DOZE/NAP power-saving modes when the core go to
cpu_idle routine.

The power management default running mode is DOZE, If the user

echo 1 > /proc/sys/kernel/powersave-nap

the system will change to NAP running mode.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc/booke: Add support for new e500mc core
Kumar Gala [Mon, 16 Jun 2008 14:41:32 +0000 (09:41 -0500)]
powerpc/booke: Add support for new e500mc core

The new e500mc core from Freescale is based on the e500v2 but with the
following changes:

* Supports only the Enhanced Debug Architecture (DSRR0/1, etc)
* Floating Point
* No SPE
* Supports lwsync
* Doorbell Exceptions
* Hypervisor
* Cache line size is now 64-bytes (e500v1/v2 have a 32-byte cache line)

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc/booke: Fix definitions for dbcr[1-2] and dbsr registers
Jerone Young [Fri, 6 Jun 2008 19:09:05 +0000 (14:09 -0500)]
powerpc/booke: Fix definitions for dbcr[1-2] and dbsr registers

This takes values from the PowerPC ISA BookIII-E specifications that are
for DBCR0. Many of these values are different from those currently
specified, which are for the ppc405. Also added some bookE definitions
for DBCR1 & DBCR2.

[ galak@kernel.crashing.org: Added aliases to 40x DBCR0 to match Book-E,
  Added enhanced debug DBCR0/DBSR _CIRPT and _CRET defines and DBSR
  IRPT and RET. ]

Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc/booke: Fix some comments related to debug level exceptions
Kumar Gala [Wed, 11 Jun 2008 18:07:26 +0000 (13:07 -0500)]
powerpc/booke: Fix some comments related to debug level exceptions

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc/QE: qe_reset should be __init
Anton Vorontsov [Wed, 11 Jun 2008 12:32:48 +0000 (16:32 +0400)]
powerpc/QE: qe_reset should be __init

This patch fixes following section mismatch:

WARNING: arch/powerpc/sysdev/built-in.o(.text+0x11d8): Section mismatch in
reference from the function qe_reset() to the function
.init.text:cpm_muram_init()

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc/QE: switch to the cpm_muram implementation
Anton Vorontsov [Fri, 23 May 2008 16:39:06 +0000 (20:39 +0400)]
powerpc/QE: switch to the cpm_muram implementation

This is very trivial patch. We're transitioning to the cpm_muram_*
calls. That's it.

Less trivial changes:
- BD_SC_* defines were defined in the cpm.h and qe.h, so to avoid redefines
  we remove BD_SC from the qe.h and use cpm.h along with cpm_muram_*
  prototypes;
- qe_muram_dump was unused and thus removed;
- added some code to the cpm_common.c to support legacy QE bindings
  (data-only node name).
- For convenience, define qe_* calls to cpm_*. So drivers need not to be
  changed.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc/83xx: new board support: MPC8360E-RDK
Anton Vorontsov [Fri, 23 May 2008 16:39:01 +0000 (20:39 +0400)]
powerpc/83xx: new board support: MPC8360E-RDK

This is patch adds board file, device tree, and defconfig for the new
board, made by Freescale Semiconductor Inc. and Logic Product Development.

Currently supported:
1. UEC{1,2,7,4};
2. I2C;
3. SPI;
4. NS16550 serial;
5. PCI and miniPCI;
6. Intel NOR StrataFlash X16 64Mbit PC28F640P30T85;
7. Graphics controller, Fujitsu MB86277.

Not supported in this patch:
1. StMICRO NAND512W3A2BN6E, 512 Mbit (supported with FSL UPM NAND driver);
2. FHCI USB (supported with FHCI driver).
3. QE Serial UCCs (tested to not work with ucc_uart driver, reason
   unknown, yet);
4. ADC AD7843 (tested to work, but support via device tree depends on
   major SPI rework, GPIO API, etc);

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc/QE: implement support for the GPIO LIB API
Anton Vorontsov [Mon, 19 May 2008 17:47:05 +0000 (21:47 +0400)]
powerpc/QE: implement support for the GPIO LIB API

This is needed to access QE GPIOs via Linux GPIO API.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-By: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc/QE: prepare QE PIO code for GPIO LIB support
Anton Vorontsov [Fri, 23 May 2008 16:38:58 +0000 (20:38 +0400)]
powerpc/QE: prepare QE PIO code for GPIO LIB support

- split and export __par_io_config_pin() out of par_io_config_pin(), so we
  could use the prefixed version with GPIO LIB API;
- rename struct port_regs to qe_pio_regs, and place it into qe.h;
- rename #define NUM_OF_PINS to QE_PIO_PINS, and place it into qe.h.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-By: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc/QE: add support for QE USB clocks routing
Anton Vorontsov [Fri, 23 May 2008 16:38:56 +0000 (20:38 +0400)]
powerpc/QE: add support for QE USB clocks routing

This patch adds a function to the qe_lib to setup QE USB clocks routing.
To setup clocks safely, cmxgcr register needs locking, so I just reused
ucc_lock since it was used only to protect cmxgcr.

The idea behind placing clocks routing functions into the qe_lib is that
later we'll hopefully switch to the generic Linux Clock API, thus, for
example, FHCI driver may be used for QE and CPM chips without nasty #ifdefs.

This patch also fixes QE_USB_RESTART_TX command definition in the qe.h.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-By: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc/sysdev: implement FSL GTM support
Anton Vorontsov [Fri, 23 May 2008 16:38:54 +0000 (20:38 +0400)]
powerpc/sysdev: implement FSL GTM support

GTM stands for General-purpose Timers Module and able to generate
timer{1,2,3,4} interrupts. These timers are used by the drivers that
need time precise interrupts (like for USB transactions scheduling for
the Freescale USB Host controller as found in some QE and CPM chips),
or these timers could be used as wakeup events from the CPU deep-sleep
mode.

Things unimplemented:
1. Cascaded (32 bit) timers (1-2, 3-4).
   This is straightforward to implement when needed, two timers should
   be marked as "requested" and configured as appropriate.
2. Super-cascaded (64 bit) timers (1-2-3-4).
   This is also straightforward to implement when needed, all timers
   should be marked as "requested" and configured as appropriate.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc/85xx: add local bus nodes for Flash and CAN to tqm8560.dts
Wolfgang Grandegger [Fri, 6 Jun 2008 11:50:06 +0000 (13:50 +0200)]
powerpc/85xx: add local bus nodes for Flash and CAN to tqm8560.dts

This patch adds local bus nodes for Flash and CAN to the DTS file
of the TQM8560 module (tqm8560.dts).

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc/85xx: support for the TQM8548 module using the big Flash
Wolfgang Grandegger [Fri, 6 Jun 2008 11:50:05 +0000 (13:50 +0200)]
powerpc/85xx: support for the TQM8548 module using the big Flash

Some TQM85xx boards could be equipped with up to 1 GiB (NOR) flash
memory and therefore a modified memory map is required and setup by
the board loader. This patch adds an appropriate DTS file.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc/85xx: add board support for the TQM8548 modules
Wolfgang Grandegger [Fri, 6 Jun 2008 11:50:04 +0000 (13:50 +0200)]
powerpc/85xx: add board support for the TQM8548 modules

This patch adds support for the TQM8548 modules from TQ-Components
GmbH (http://www.tqc.de).

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc/85xx: correct vendor prefix in DTS files for TQM85xx modules
Wolfgang Grandegger [Fri, 6 Jun 2008 11:50:03 +0000 (13:50 +0200)]
powerpc/85xx: correct vendor prefix in DTS files for TQM85xx modules

Like for the TQM5200, the vendor prefix "tqc," is now used for all
TQM85xx modules from TQ-Components GmbH (http://www.tqc.de) in the
corresponding DTS files.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years agopowerpc: Remove arch/ppc and include/asm-ppc
Paul Mackerras [Mon, 9 Jun 2008 04:01:46 +0000 (14:01 +1000)]
powerpc: Remove arch/ppc and include/asm-ppc

All the maintained platforms are now in arch/powerpc, so the old
arch/ppc stuff can now go away.

Acked-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Becky Bruce <becky.bruce@freescale.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jochen Friedrich <jochen@scram.de>
Acked-by: John Linn <john.linn@xilinx.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Scott Wood <scottwood@freescale.com>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Improve (in|out)_[bl]eXX() asm code
Trent Piepho [Tue, 27 May 2008 23:48:32 +0000 (09:48 +1000)]
powerpc: Improve (in|out)_[bl]eXX() asm code

Since commit 4cb3cee03d558fd457cb58f56c80a2a09a66110c the code generated
for the in_beXX() and out_beXX() mmio functions has been sub-optimal.

The out_leXX() family of functions are created with the macro
DEF_MMIO_OUT_LE() while the out_beXX() family are created with
DEF_MMIO_OUT_BE().  In what was perhaps a bit too much macro use, both of
these macros are in turn created via the macro DEF_MMIO_OUT().

For the LE versions, eventually they boil down to an asm that will look
something like this:
asm("sync; stwbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));

The issue is that the "stwbrx" instruction only comes in an indexed, or
'x', version, in which the address is represented by the sum of two
registers (the "0,%2").  Unfortunately, gcc doesn't have a constraint for
an indexed memory reference.  The "m" constraint allows both indexed and
offset, i.e. register plus constant, memory references and there is no
"stwbr" version for offset references.  "m" also allows updating addresses
and there is no 'u' version of "stwbrx" like there is with "stwux".

The unused first operand to the asm is just to tell gcc that *addr is an
output of the asm.  The address used is passed in a single register via the
third asm operand, and the index register is just hard coded as 0.  This
means gcc is forced to put the address in a single register and can't use
index addressing, e.g. if one has the data in register 9, a base address in
register 3 and an index in register 4, gcc must emit code like "add 11,4,3;
stwbrx 9,0,11" instead of just "stwbrx 9,4,3".  This costs an extra add
instruction and another register.

For gcc 4.0 and older, there doesn't appear to be anything that can be
done.  But for 4.1 and newer, there is a 'Z' constraint.  It does not allow
"updating" addresses, but does allow both indexed and offset addresses.
However, the only allowed constant offset is 0.  We can then use the
undocumented 'y' operand modifier, which causes gcc to convert "0(reg)"
into the equivilient "0,reg" format that can be used with stwbrx.

This brings us the to problem with the BE version.  In this case, the "stw"
instruction does have both indexed and non-indexed versions.  The final asm
ends up looking like this:
asm("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val), "r" (addr));

The undocumented codes "%U0" and "%0X" will generate a 'u' if the memory
reference should be an auto-updating one, and an 'x' if the memory
reference is indexed, respectively.  The third operand is unused, it's just
there because asm the code is reused from the LE version.  However, gcc
does not know this, and generates unnecessary code to stick addr in a
register!  To use the example from the LE version, gcc will generate "add
11,4,3; stwx 9,4,3".  It is able to use the indexed address "4,3" for the
"stwx", but still thinks it needs to put 4+3 into register 11, which will
never be used.

This also ends up happening a lot for the offset addressing mode, where
common code like this:  out_be32(&device_registers->some_register, data);
uses an instruction like "stw 9, 42(3)", where register 3 has the pointer
device_registers and 42 is the offset of some_register in that structure.
gcc will be forced to generate the unnecessary instruction "addi 11, 3, 42"
to put the address into a single (unused) register.

The in_* versions end up having these exact same problems as well.

Signed-off-by: Trent Piepho <tpiepho@freescale.com>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Andreas Schwab <schwab@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Fix irq_alloc_host() reference counting and callers
Michael Ellerman [Mon, 26 May 2008 02:12:32 +0000 (12:12 +1000)]
powerpc: Fix irq_alloc_host() reference counting and callers

When I changed irq_alloc_host() to take an of_node
(52964f87c64e6c6ea671b5bf3030fb1494090a48: "Add an optional
device_node pointer to the irq_host"), I botched the reference
counting semantics.

Stephen pointed out that it's irq_alloc_host()'s business if
it needs to take an additional reference to the device_node,
the caller shouldn't need to care.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Rework qe_ic_init() so we can avoid freeing the irq_host
Michael Ellerman [Mon, 26 May 2008 02:12:31 +0000 (12:12 +1000)]
powerpc: Rework qe_ic_init() so we can avoid freeing the irq_host

If we do the call to of_address_to_resource() first, then we don't
need to worry about freeing the irq_host (which the code doesn't do
currently anyway).

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Rework ipic_init() so we can avoid freeing the irq_host
Michael Ellerman [Mon, 26 May 2008 02:12:30 +0000 (12:12 +1000)]
powerpc: Rework ipic_init() so we can avoid freeing the irq_host

If we do the call to of_address_to_resource() first, then we don't
need to worry about freeing the irq_host (which the code doesn't do
currently anyway).

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Rework Axon MSI setup so we can avoid freeing the irq_host
Michael Ellerman [Mon, 26 May 2008 02:12:30 +0000 (12:12 +1000)]
powerpc: Rework Axon MSI setup so we can avoid freeing the irq_host

If we do the call to irq_of_parse_and_map() first, then we don't
need to worry about freeing the irq_host.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Check that TASK_SIZE does not overlap KERNEL_START
Rune Torgersen [Fri, 23 May 2008 15:59:15 +0000 (01:59 +1000)]
powerpc: Check that TASK_SIZE does not overlap KERNEL_START

Make sure CONFIG_TASK_SIZE does not overlap CONFIG_KERNEL_START
This could happen when overriding settings to get 1GB lowmem, and would lead
to userland mysteriousely hanging.

This setting is only used by PPC32.

Signed-off-by: Rune Torgersen <runet@innovsys.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agoplatinumfb: Use linux/of_{device,platform}.h instead of asm
Stephen Rothwell [Fri, 23 May 2008 06:39:58 +0000 (16:39 +1000)]
platinumfb: Use linux/of_{device,platform}.h instead of asm

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agoof_serial: Use linux/of_platform.h instead of asm
Stephen Rothwell [Fri, 23 May 2008 06:32:54 +0000 (16:32 +1000)]
of_serial: Use linux/of_platform.h instead of asm

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Add the PC speaker only when requested
Emil Medve [Thu, 22 May 2008 22:40:16 +0000 (08:40 +1000)]
powerpc: Add the PC speaker only when requested

This eliminates this minor boot-time debugging error message:

[    1.316451] calling  add_pcspkr+0x0/0x84
[    1.316478] initcall add_pcspkr+0x0/0x84 returned -19 after 0 msecs

Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Add C2K to configuration
Remi Machet [Fri, 16 May 2008 00:26:02 +0000 (10:26 +1000)]
powerpc: Add C2K to configuration

Support for the C2K cPCI Single Board Computer from GEFanuc
(PowerPC MPC7448 with a Marvell MV64460 chipset).
All features of the board are not supported yet, but the board
boots, flash works, all Ethernet ports are working and PCI
devices are all found (USB and SATA on PCI1 do not work yet).

Part 5 of 5: add the Kconfig entry for the C2K board.

Signed-off-by: Remi Machet <rmachet@slac.stanford.edu>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Default configuration for C2K
Remi Machet [Fri, 16 May 2008 00:25:28 +0000 (10:25 +1000)]
powerpc: Default configuration for C2K

Support for the C2K cPCI Single Board Computer from GEFanuc
(PowerPC MPC7448 with a Marvell MV64460 chipset).
All features of the board are not supported yet, but the board
boots, flash works, all Ethernet ports are working and PCI
devices are all found (USB and SATA on PCI1 do not work yet).

Part 4 of 5: this is the default config for the board.  In this
configuration the kernel is going to try to boot from MTD
partition 3 on the NOR flash (see c2k.dts for details about
the partitioning of the flash).

Signed-off-by: Remi Machet <rmachet@slac.stanford.edu>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: C2K board driver
Remi Machet [Fri, 16 May 2008 19:31:04 +0000 (05:31 +1000)]
powerpc: C2K board driver

Support for the C2K cPCI Single Board Computer from GEFanuc
(PowerPC MPC7448 with a Marvell MV64460 chipset).
All features of the board are not supported yet, but the board
boots, flash works, all Ethernet ports are working and PCI
devices are all found (USB and SATA on PCI1 do not work yet).

Part 3 of 5: driver for the board.  At this time it is very generic
and similar to its original, the driver for the prpmc2800.

Signed-off-by: Remi Machet <rmachet@slac.stanford.edu>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Boot code for the C2K
Remi Machet [Tue, 20 May 2008 20:50:10 +0000 (06:50 +1000)]
powerpc: Boot code for the C2K

Support for the C2K cPCI Single Board Computer from GEFanuc
(PowerPC MPC7448 with a Marvell MV64460 chipset).
All features of the board are not supported yet, but the board
boots, flash works, all Ethernet ports are working and PCI
devices are all found (USB and SATA on PCI1 do not work yet).

Part 2 of 5: support for the board in arch/powerpc/boot.

Signed-off-by: Remi Machet <rmachet@slac.stanford.edu>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: DTS file for the C2K
Remi Machet [Tue, 20 May 2008 17:30:24 +0000 (03:30 +1000)]
powerpc: DTS file for the C2K

Support for the C2K cPCI Single Board Computer from GEFanuc
(PowerPC MPC7448 with a Marvell MV64460 chipset).
All features of the board are not supported yet, but the board
boots, flash works, all Ethernet ports are working and PCI
devices are all found (USB and SATA on PCI1 do not work yet).

Part 1 of 5: DTS file describing the board peripherals.  As far as I
know all peripherals except the FPGA are listed in there (I did not
include the FPGA because a lot of work is needed there).

Signed-off-by: Remi Machet <rmachet@slac.stanford.edu>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc/mpic: Fix ambiguous else statement
Anton Vorontsov [Fri, 23 May 2008 18:40:00 +0000 (04:40 +1000)]
powerpc/mpic: Fix ambiguous else statement

This fixes the following warning, introduced by commit
475ca391b490a683d66bf19999a8a7a24913f139 (mpic: Deal with bogus NIRQ
in Feature Reporting Register):

  CC      arch/powerpc/sysdev/mpic.o
arch/powerpc/sysdev/mpic.c: In function 'mpic_alloc':
arch/powerpc/sysdev/mpic.c:1146: warning: suggest explicit braces to avoid ambiguous 'else'

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agoMerge branch 'merge'
Paul Mackerras [Mon, 9 Jun 2008 02:19:41 +0000 (12:19 +1000)]
Merge branch 'merge'

Conflicts:

arch/powerpc/sysdev/fsl_soc.c

16 years ago[POWERPC] ehea: Remove dependency on MEMORY_HOTPLUG
Nathan Lynch [Tue, 3 Jun 2008 22:31:28 +0000 (08:31 +1000)]
[POWERPC] ehea: Remove dependency on MEMORY_HOTPLUG

Now that walk_memory_resource() is available regardless of
MEMORY_HOTPLUG's setting, this dependency is not needed.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years ago[POWERPC] Make walk_memory_resource available with MEMORY_HOTPLUG=n
Nathan Lynch [Tue, 3 Jun 2008 22:30:54 +0000 (08:30 +1000)]
[POWERPC] Make walk_memory_resource available with MEMORY_HOTPLUG=n

The ehea driver was recently changed[1] to use walk_memory_resource() to
detect the system's memory layout.  However, walk_memory_resource() is
available only when memory hotplug is enabled.  So CONFIG_EHEA was
made to depend on MEMORY_HOTPLUG [2], but it is inappropriate for a
network driver to have such a dependency.

Make the declaration of walk_memory_resource() and its powerpc
implementation (ehea is powerpc-specific) unconditionally available.

[1] 48cfb14f8b89d4d5b3df6c16f08b258686fb12ad
    "ehea: Add DLPAR memory remove support"

[2] fb7b6ca2b6b7c23b52be143bdd5f55a23b9780c8
    "ehea: Add dependency to Kconfig"

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years ago[POWERPC] Use dev_set_name in pci_64.c
Stephen Rothwell [Tue, 3 Jun 2008 03:36:11 +0000 (13:36 +1000)]
[POWERPC] Use dev_set_name in pci_64.c

During the next merge window, pci_name()'s return value will become
const, so use the new dev_set_name() instead to avoid the warning (from
linux-next):

arch/powerpc/kernel/pci_64.c: In function 'of_create_pci_dev':
arch/powerpc/kernel/pci_64.c:193: warning: passing argument 1 of 'sprintf' discards qualifiers from pointer target type

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years ago[POWERPC] Fix incorrect enabling of VMX when building signal or user context
Benjamin Herrenschmidt [Mon, 2 Jun 2008 06:22:59 +0000 (16:22 +1000)]
[POWERPC] Fix incorrect enabling of VMX when building signal or user context

When building a signal or a ucontext, we can incorrectly set the MSR_VEC
bit of the kernel pt_regs->msr before returning to userspace if the task
-ever- used VMX.

This can lead to funny result if that stack used it in the past, then
"lost" it (ie. it wasn't enabled after a context switch for example)
and then called get_context.  It can end up with VMX enabled and the
registers containing values from some other task.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years ago[POWERPC] boot/Makefile CONFIG_ variable fixes
Adrian Bunk [Wed, 21 May 2008 17:38:28 +0000 (03:38 +1000)]
[POWERPC] boot/Makefile CONFIG_ variable fixes

This corrects the names of two CONFIG_ variables.

Note that the CONFIG_MPC86XADS fix uncovers another bug
(with mpc866_ads_defconfig) that will require fixing:

<--  snip  -->

...
arch/powerpc/boot/dtc -O dtb -o arch/powerpc/boot/mpc866ads.dtb -b 0  /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/dts/mpc866ads.dts
DTC: dts->dtb  on file "/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/dts/mpc866ads.dts"
  WRAP    arch/powerpc/boot/cuImage.mpc866ads
powerpc64-linux-ld: arch/powerpc/boot/cuboot-mpc866ads.o: No such file: No such file or directory
make[2]: *** [arch/powerpc/boot/cuImage.mpc866ads] Error 1

<--  snip  -->

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agouml: activate_mm: remove the dead PF_BORROWED_MM check
Oleg Nesterov [Fri, 6 Jun 2008 18:31:39 +0000 (11:31 -0700)]
uml: activate_mm: remove the dead PF_BORROWED_MM check

use_mm() was changed to use switch_mm() instead of activate_mm(), since
then nobody calls (and nobody should call) activate_mm() with
PF_BORROWED_MM bit set.

As Jeff Dike pointed out, we can also remove the "old != new" check, it is
always true.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Fri, 6 Jun 2008 18:33:30 +0000 (11:33 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ipath: Fix SM trap forwarding
  IB/ehca: Reject send WRs only for RESET, INIT and RTR state
  MAINTAINERS: Update NetEffect (iw_nes) entry
  IB/ipath: Fix device capability flags
  IB/ipath: Avoid test_bit() on u64 SDMA status value

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes...
Linus Torvalds [Fri, 6 Jun 2008 18:33:08 +0000 (11:33 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  x86/PCI: add workaround for bug in ASUS A7V600 BIOS (rev 1005)
  PCI/x86: fix up PCI stuff so that PCI_GOANY supports OLPC

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Fri, 6 Jun 2008 18:32:37 +0000 (11:32 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  sound: emu10k1 - fix system hang with Audigy2 ZS Notebook PCMCIA card

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/chrisw...
Linus Torvalds [Fri, 6 Jun 2008 18:31:55 +0000 (11:31 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/chrisw/lsm-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/chrisw/lsm-2.6:
  capabilities: remain source compatible with 32-bit raw legacy capability support.
  LSM: remove stale web site from MAINTAINERS

16 years agoMerge git://git.infradead.org/~dwmw2/mtd-2.6.26
Linus Torvalds [Fri, 6 Jun 2008 18:31:18 +0000 (11:31 -0700)]
Merge git://git.infradead.org/~dwmw2/mtd-2.6.26

* git://git.infradead.org/~dwmw2/mtd-2.6.26:
  [MTD] m25p80.c mutex unlock fix

16 years agoipwireless: Fix blocked sending
David Sterba [Fri, 6 Jun 2008 08:56:35 +0000 (10:56 +0200)]
ipwireless: Fix blocked sending

Packet sending is driven by two flags, tx_ready and tx_queued.
It was possible, that there were queued data for sending and
hardware was flagged as blocked but in fact it was not.

The tx_queued was indicator but should be really a counter else
first fragmented packet resets tx_queued flag, but there may be
pending packets which do not get sent.

New semantics:
tx_ready - set, if hw is ready to send packet, no packet is being
           transferred right now
           set the flag right at the place where data are copied
           into hw memory and not earlier without checking if it
           was succesful
tx_queued - count of enqueued packets, including fragments

Tested-by: Michal Rokos <michal.rokos@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agovm: add kzalloc_node() inline
Jeff Layton [Fri, 6 Jun 2008 05:47:00 +0000 (22:47 -0700)]
vm: add kzalloc_node() inline

To get zeroed out memory from a particular NUMA node.  To be used by
sunrpc.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agopagemap: add documentation for pagemap
Thomas Tuttle [Fri, 6 Jun 2008 05:46:59 +0000 (22:46 -0700)]
pagemap: add documentation for pagemap

Just a quick explanation of the pagemap interface from a userspace point
of view, and an example of how to use it (in English, not code).

Signed-off-by: Thomas Tuttle <ttuttle@google.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agopagemap: return EINVAL, not EIO, for unaligned reads of kpagecount or kpageflags
Thomas Tuttle [Fri, 6 Jun 2008 05:46:58 +0000 (22:46 -0700)]
pagemap: return EINVAL, not EIO, for unaligned reads of kpagecount or kpageflags

If the user tries to read from a position that is not a multiple of 8, or
read a number of bytes that is not a multiple of 8, they have passed an
invalid argument to read, for the purpose of reading these files.  It's
not an IO error because we didn't encounter any trouble finding the data
they asked for.

Signed-off-by: Thomas Tuttle <ttuttle@google.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agopagemap: return map count, not reference count, in /proc/kpagecount
Thomas Tuttle [Fri, 6 Jun 2008 05:46:58 +0000 (22:46 -0700)]
pagemap: return map count, not reference count, in /proc/kpagecount

Since pagemap is all about examining pages mapped into processes' memory
spaces, it makes sense for kpagecount to return the map counts, not the
reference counts.

Signed-off-by: Thomas Tuttle <ttuttle@google.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agohdaps: fix module loading on Thinkpad T61P
Tim Gardner [Fri, 6 Jun 2008 05:46:55 +0000 (22:46 -0700)]
hdaps: fix module loading on Thinkpad T61P

Adds DMI system identifier for ThinkPad T61.

Originally written by Klaus S. Madsen.

Taken from http://launchpadlibrarian.net/10864950/hdaps-t61.patch

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: maximilian attems <max@stro.at>
Cc: Klaus S. Madsen <ubuntu@hjernemadsen.org>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoproc: calculate the correct /proc/<pid> link count
Vegard Nossum [Fri, 6 Jun 2008 05:46:53 +0000 (22:46 -0700)]
proc: calculate the correct /proc/<pid> link count

This patch:

  commit e9720acd728a46cb40daa52c99a979f7c4ff195c
  Author: Pavel Emelyanov <xemul@openvz.org>
  Date:   Fri Mar 7 11:08:40 2008 -0800

    [NET]: Make /proc/net a symlink on /proc/self/net (v3)

introduced a /proc/self/net directory without bumping the corresponding
link count for /proc/self.

This patch replaces the static link count initializations with a call that
counts the number of directory entries in the given pid_entry table
whenever it is instantiated, and thus relieves the burden of manually
keeping the two in sync.

[akpm@linux-foundation.org: cleanup]
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agortc: class driver for ppc_md RTC functions
David Woodhouse [Fri, 6 Jun 2008 05:46:50 +0000 (22:46 -0700)]
rtc: class driver for ppc_md RTC functions

This hooks up the platform-specific [gs]et_rtc_time functions so that
kernels using CONFIG_RTC_CLASS have RTC support on most PowerPC platforms.

A new driver, and one which we've been shipping in Fedora for a while
already, since otherwise RTC support breaks.

[akpm@linux-foundation.org: fix Kconfig indenting]
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoasm-m32r/uaccess.h must #include <asm/setup.h>
Adrian Bunk [Fri, 6 Jun 2008 05:46:48 +0000 (22:46 -0700)]
asm-m32r/uaccess.h must #include <asm/setup.h>

This patch fixes the following compile error caused by
commit 4016a1390d07f15b267eecb20e76a48fd5c524ef
(mm/nommu.c: return 0 from kobjsize with invalid objects):

/home/bunk/linux/kernel-2.6/git/linux-2.6/mm/nommu.c: In function 'kobjsize':
/home/bunk/linux/kernel-2.6/git/linux-2.6/mm/nommu.c:112: error: 'memory_end' undeclared (first use in this function)
/home/bunk/linux/kernel-2.6/git/linux-2.6/mm/nommu.c:112: error: (Each undeclared identifier is reported only once
/home/bunk/linux/kernel-2.6/git/linux-2.6/mm/nommu.c:112: error: for each function it appears in.)

The patch also removes now no longer required memory_{start,end}
declarations inside access_ok().

Reported-by: Adrian Bunk <adrian.bunk@movial.fi>
Signed-off-by: Adrian Bunk <adrian.bunk@movial.fi>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: fix online resize bug
Josef Bacik [Fri, 6 Jun 2008 05:46:47 +0000 (22:46 -0700)]
ext3: fix online resize bug

There is a bug when we are trying to verify that the reserve inode's
double indirect blocks point back to the primary gdt blocks.  The fix is
obvious, we need to mod the gdb count by the addr's per block.  You can
verify this with the following test case

dd if=/dev/zero of=disk1 seek=1024 count=1 bs=100M
losetup /dev/loop1 disk1
pvcreate /dev/loop1
vgcreate loopvg1 /dev/loop1
lvcreate -l 100%VG loopvg1 -n looplv1
mkfs.ext3 -J size=64 -b 1024 /dev/loopvg1/looplv1
mount /dev/loopvg1/looplv1 /mnt/loop
dd if=/dev/zero of=disk2 seek=1024 count=1 bs=50M
losetup /dev/loop2 disk2
pvcreate /dev/loop2
vgextend loopvg1 /dev/loop2
lvextend -l 100%VG /dev/loopvg1/looplv1
resize2fs /dev/loopvg1/looplv1

without this patch the resize2fs fails, with it the resize2fs succeeds.

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Acked-by: Andreas Dilger <adilger@sun.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agonommu: fix ksize() abuse
Pekka Enberg [Fri, 6 Jun 2008 05:46:46 +0000 (22:46 -0700)]
nommu: fix ksize() abuse

The nommu binfmt code uses ksize() for pointers returned from do_mmap()
which is wrong.  This converts the call-sites to use the nommu specific
kobjsize() function which works as expected.

Cc: Christoph Lameter <clameter@sgi.com>
Cc: Matt Mackall <mpm@selenic.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agodoc: document the kernel-doc conventions for kernel hackers
Paul Jackson [Fri, 6 Jun 2008 05:46:45 +0000 (22:46 -0700)]
doc: document the kernel-doc conventions for kernel hackers

Provide documentation of the kernel-doc documentation conventions oriented
to kernel hackers.

Since I figure that there will be more people reading this
kernel-doc-nano-HOWTO.txt file who are kernel developers focused on the
rest of the kernel, than there will be readers of this file who are
documentation developers extracting that embedded kernel-doc
documentation, I have taken the liberty of making the new section added
here:

  How to format kernel-doc comments

the first section of the kernel-doc-nano-HOWTO.txt file.

This first section is intended to introduce, motivate and provide basic
usage of the kernel-doc mechanism for kernel hackers developing other
portions of the kernel.

Signed-off-by: Paul Jackson <pj@sgi.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofbdev: export symbol fb_mode_option
Geoff Levand [Fri, 6 Jun 2008 05:46:44 +0000 (22:46 -0700)]
fbdev: export symbol fb_mode_option

Frame buffer and mode setting drivers can be built as modules,
so fb_mode_option needs to be exported to support these.

Prevents this error:

  ERROR: "fb_mode_option" [drivers/ps3/ps3av_mod.ko] undefined!

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMAINTAINERS: reiserfs entry is out of date
Alan Cox [Fri, 6 Jun 2008 05:46:42 +0000 (22:46 -0700)]
MAINTAINERS: reiserfs entry is out of date

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Edward Shishkin <edward.shishkin@gmail.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agov850: fix typo in header guard
Vegard Nossum [Fri, 6 Jun 2008 05:46:42 +0000 (22:46 -0700)]
v850: fix typo in header guard

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoh8300: fix typo in header guard
Vegard Nossum [Fri, 6 Jun 2008 05:46:41 +0000 (22:46 -0700)]
h8300: fix typo in header guard

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoatmel_serial: filter out FP during baud rate detection
Haavard Skinnemoen [Fri, 6 Jun 2008 05:46:39 +0000 (22:46 -0700)]
atmel_serial: filter out FP during baud rate detection

I made a change to u-boot that used the FP (Fractional Part) field of BRGR
to achieve more accurate baud rate generation.  Unfortunately, the
atmel_serial driver looks at the whole BRGR register when trying to detect
the baud rate that the port is currently running at, so setting FP to a
nonzero value breaks the baud rate detection.

I'll sit on the u-boot patch for a while longer, but this is clearly a
bug in the atmel_serial driver which should be fixed.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agovt: fix vc_resize locking
Nick Piggin [Fri, 6 Jun 2008 05:46:38 +0000 (22:46 -0700)]
vt: fix vc_resize locking

Lockdep says we can't take tasklist lock or sighand lock inside ctrl_lock.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Alan Cox <alan@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoipc: only output msgmni value at boot time
Nadia Derbey [Fri, 6 Jun 2008 05:46:38 +0000 (22:46 -0700)]
ipc: only output msgmni value at boot time

When posting:
[PATCH 1/8] Scaling msgmni to the amount of lowmem
(see http://lkml.org/lkml/2008/2/11/171), I have added a KERN_INFO message
that is output each time msgmni is recomputed.

In http://lkml.org/lkml/2008/4/29/575 Tony Luck complained that this
message references an ipc namespace address that is useless.

I first thought of using an audit_log instead of a printk, as suggested by
Serge Hallyn.  But unfortunately, we do not have any other information
than the namespace address to provide here too.  So I chose to move the
message and output it only at boot time, removing the reference to the
namespace.

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: "Serge E. Hallyn" <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoipc: restore MSGPOOL original value
Nadia Derbey [Fri, 6 Jun 2008 05:46:36 +0000 (22:46 -0700)]
ipc: restore MSGPOOL original value

When posting:

[PATCH 1/8] Scaling msgmni to the amount of lowmem

(see http://article.gmane.org/gmane.linux.kernel/637849/) I changed the
MSGPOOL value to make it fit what is said in the man pages (i.e.  a size
in bytes).

But Michael Kerrisk rightly complained that this change could affect the
ABI.  So I'm posting this patch to make MSGPOOL expressed back in Kbytes.
Michael, on his side, has fixed the man page.

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agovt: fix background color on line feed, DEC invert
Jan Engelhardt [Fri, 6 Jun 2008 05:46:34 +0000 (22:46 -0700)]
vt: fix background color on line feed, DEC invert

Original report: """I used to force my console to black-on-white by the
command `setterm -inversescreen on`.  In 2.6.26-rc4, I get lots of black
background characters."""

Another addendum to commit c9e587ab.  This was previously missed out since
I was not aware of what vc_decscnm was for.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Reported-by: <thunder7@xs4all.nl>
Tested-by: <thunder7@xs4all.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocpufreq: fix null object access on Transmeta CPU
CHIKAMA masaki [Fri, 6 Jun 2008 05:46:33 +0000 (22:46 -0700)]
cpufreq: fix null object access on Transmeta CPU

If cpu specific cpufreq driver(i.e.  longrun) has "setpolicy" function,
governor object isn't set into cpufreq_policy object at "__cpufreq_set_policy"
function in driver/cpufreq/cpufreq.c .

This causes a null object access at "store_scaling_setspeed" and
"show_scaling_setspeed" function in driver/cpufreq/cpufreq.c when reading or
writing through /sys interface (ex.  cat
/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed)

Addresses:
http://bugzilla.kernel.org/show_bug.cgi?id=10654
https://bugzilla.redhat.com/show_bug.cgi?id=443354

Signed-off-by: CHIKAMA Masaki <masaki.chikama@gmail.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Chuck Ebbert <cebbert@redhat.com>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofbcon: fix wrong vmode bits copied on console switch
Krzysztof Helt [Fri, 6 Jun 2008 05:46:33 +0000 (22:46 -0700)]
fbcon: fix wrong vmode bits copied on console switch

The interlaced and double line mode bits should not be copied to new
console when the console is switched.  Otherwise, the new console may be
set to incorrect refresh rate.

Also, the x and y offsets does not need to be copied.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agokeys: remove unused key_alloc_sem
Daniel Walker [Fri, 6 Jun 2008 05:46:32 +0000 (22:46 -0700)]
keys: remove unused key_alloc_sem

This semaphore doesn't appear to be used, so remove it.

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocpusets: fix bug when adding nonexistent cpu or mem
Lai Jiangshan [Fri, 6 Jun 2008 05:46:32 +0000 (22:46 -0700)]
cpusets: fix bug when adding nonexistent cpu or mem

Adding a nonexistent cpu to a cpuset will be omitted quietly.  It should
return -EINVAL.

Example: (real_nr_cpus <= 4 < NR_CPUS or cpu#4 was just offline)

# cat cpus
0-1
# /bin/echo 4 > cpus
# /bin/echo $?
0
# cat cpus

#

The same occurs when add a nonexistent mem.
This patch will fix this bug.
And when *buf == "", the check is unneeded.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Paul Jackson <pj@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agopagemap: fix bug in add_to_pagemap, require aligned-length reads of /proc/pid/pagemap
Thomas Tuttle [Fri, 6 Jun 2008 05:46:31 +0000 (22:46 -0700)]
pagemap: fix bug in add_to_pagemap, require aligned-length reads of /proc/pid/pagemap

Fix a bug in add_to_pagemap.  Previously, since pm->out was a char *,
put_user was only copying 1 byte of every PFN, resulting in the top 7
bytes of each PFN not being copied.  By requiring that reads be a multiple
of 8 bytes, I can make pm->out and pm->end u64*s instead of char*s, which
makes put_user work properly, and also simplifies the logic in
add_to_pagemap a bit.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Thomas Tuttle <ttuttle@google.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agodevscgroup: make white list more compact in some cases
Pavel Emelyanov [Fri, 6 Jun 2008 05:46:28 +0000 (22:46 -0700)]
devscgroup: make white list more compact in some cases

Consider you added a 'c foo:bar r' permission to some cgroup and then (a
bit later) 'c'foo:bar w' for it.  After this you'll see the

c foo:bar r
c foo:bar w

lines in a devices.list file.

Another example - consider you added 10 'c foo:bar r' permissions to some
cgroup (e.g.  by mistake).  After this you'll see 10 c foo:bar r lines in
a list file.

This is weird.  This situation also has one more annoying consequence.
Having many items in a white list makes permissions checking slower, sine
it has to walk a longer list.

The proposal is to merge permissions for items, that correspond to the
same device.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agodevscgroup: check for device permissions at mount time
Pavel Emelyanov [Fri, 6 Jun 2008 05:46:27 +0000 (22:46 -0700)]
devscgroup: check for device permissions at mount time

Currently even if a task sits in an all-denied cgroup it can still mount
any block device in any mode it wants.

Put a proper check in do_open for block device to prevent this.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Tested-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agodevscgroup: relax task to dev_cgroup conversion
Pavel Emelyanov [Fri, 6 Jun 2008 05:46:26 +0000 (22:46 -0700)]
devscgroup: relax task to dev_cgroup conversion

Two functions, that need to get a device_cgroup from a task (they are
devcgroup_inode_permission and devcgroup_inode_mknod) make it in a strange
way:

They get a css_set from task, then a subsys_state from css_set, then a
cgroup from the state and then a subsys_state again from the cgroup.
Besides, the devices_subsys_id is read from memory, whilst there's a
enum-ed constant for it.

Optimize this part a bit:
1. Get the subsys_stats form the task and be done - no 2 extra
   dereferences,
2. Use the device_subsys_id constant, not the value from memory
   (i.e. one less dereference).

Found while preparing 2.6.26 OpenVZ port.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Paul Menage <menage@google.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agodevcgroup: make a helper to convert cgroup_subsys_state to devs_cgroup
Pavel Emelyanov [Fri, 6 Jun 2008 05:46:24 +0000 (22:46 -0700)]
devcgroup: make a helper to convert cgroup_subsys_state to devs_cgroup

This is just picking the container_of out of cgroup_to_devcgroup into a
separate function.

This new css_to_devcgroup will be used in the 2nd patch.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agointroduce memory_read_from_buffer()
Akinobu Mita [Fri, 6 Jun 2008 05:46:21 +0000 (22:46 -0700)]
introduce memory_read_from_buffer()

This patch introduces memory_read_from_buffer().

The only difference between memory_read_from_buffer() and
simple_read_from_buffer() is which address space the function copies to.

simple_read_from_buffer copies to user space memory.
memory_read_from_buffer copies to normal memory.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Doug Warzecha <Douglas_Warzecha@dell.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Cc: Abhay Salunke <Abhay_Salunke@dell.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Markus Rechberger <markus.rechberger@amd.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Bob Moore <robert.moore@intel.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Len Brown <lenb@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Cc: Michael Holzheu <holzheu@de.ibm.com>
Cc: Brian King <brking@us.ibm.com>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Andrew Vasquez <linux-driver@qlogic.com>
Cc: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agolib: export bitrev16
Harvey Harrison [Fri, 6 Jun 2008 05:46:19 +0000 (22:46 -0700)]
lib: export bitrev16

Bluetooth will be able to use this.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Dave Young <hidave.darkstar@gmail.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agortc-ds1374: rename device to just "ds1374"
Jean Delvare [Fri, 6 Jun 2008 05:46:18 +0000 (22:46 -0700)]
rtc-ds1374: rename device to just "ds1374"

Change the name of the device from "rtc-ds1374" to just "ds1374", to match
what all other RTC drivers do.  I seem to remember that this name was
chosen to avoid possible confusion with an older ds1374 driver, but that
driver was removed 3 months ago.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoFix various old email addresses for dwmw2
David Woodhouse [Fri, 6 Jun 2008 05:46:18 +0000 (22:46 -0700)]
Fix various old email addresses for dwmw2

Although if people have questions about ARCnet, perhaps it's _better_
for them to be mailing dwmw2@cam.ac.uk about it...

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agouml: PATH_MAX needs limits.h
Ingo Molnar [Fri, 6 Jun 2008 05:46:14 +0000 (22:46 -0700)]
uml: PATH_MAX needs limits.h

Include limits.h to get a definition of PATH_MAX.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agouml: stub needs to tolerate SIGWINCH
Jeff Dike [Fri, 6 Jun 2008 05:46:13 +0000 (22:46 -0700)]
uml: stub needs to tolerate SIGWINCH

We lost the marking of SIGWINCH as being OK to receive during stub
execution, causing a panic should that happen.

Cc: Benedict Verheyen <benedict.verheyen@gmail.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agouml: memcpy export needs to follow host declaration
Jeff Dike [Fri, 6 Jun 2008 05:46:13 +0000 (22:46 -0700)]
uml: memcpy export needs to follow host declaration

x86_64 defines either memcpy or __memcpy depending on the gcc version, and
it looks like UML needs to follow that in its exporting.

Cc: Gabriel C <nix.or.die@googlemail.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agouml: deal with inaccessible address space start
Tom Spink [Fri, 6 Jun 2008 05:46:12 +0000 (22:46 -0700)]
uml: deal with inaccessible address space start

This patch makes os_get_task_size locate the bottom of the address space,
as well as the top.  This is for systems which put a lower limit on mmap
addresses.  It works by manually scanning pages from zero onwards until a
valid page is found.

Because the bottom of the address space may not be zero, it's not
sufficient to assume the top of the address space is the size of the
address space.  The size is the difference between the top address and
bottom address.

[jdike@addtoit.com: changed the name to reflect that this function is
supposed to return the top of the process address space, not its size and
changed the return value to reflect that.  Also some minor formatting
changes]
Signed-off-by: Tom Spink <tspink@gmail.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agouml: remove a duplicate include
Huang Weiyi [Fri, 6 Jun 2008 05:46:11 +0000 (22:46 -0700)]
uml: remove a duplicate include

Removed duplicated include file "kern_util.h" in
arch/um/drivers/ubd_kern.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agouml: deal with host time going backwards
Jeff Dike [Fri, 6 Jun 2008 05:46:10 +0000 (22:46 -0700)]
uml: deal with host time going backwards

Protection against the host's time going backwards (eg, ntp activity on
the host) by keeping track of the time at the last tick and if it's
greater than the current time, keep time stopped until the host catches
up.

Cc: Nix <nix@esperi.org.uk>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agodoc: update to URL and status of kernel-docs.txt entry
Paul Jackson [Fri, 6 Jun 2008 05:46:09 +0000 (22:46 -0700)]
doc: update to URL and status of kernel-docs.txt entry

Update status and URL for the "Gary's Encyclopedia" entry.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofujitsu-laptop: autoload module on Lifebook P1510D
Dan Williams [Fri, 6 Jun 2008 05:46:08 +0000 (22:46 -0700)]
fujitsu-laptop: autoload module on Lifebook P1510D

Signed-off-by: Dan Williams <dcbw@redhat.com>
Cc: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Cc: Len Brown <len.brown@intel.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agonommu: fix kobjsize() for SLOB and SLUB
Paul Mundt [Fri, 6 Jun 2008 05:46:08 +0000 (22:46 -0700)]
nommu: fix kobjsize() for SLOB and SLUB

kobjsize() has been abusing page->index as a method for sorting out
compound order, which blows up both for page cache pages, and SLOB's
reuse of the index in struct slob_page.

Presently we are not able to accurately size arbitrary pointers that
don't come from kmalloc(), so the best we can do is sort out the
compound order from the head page if it's a compound page, or default
to 0-order if it's impossible to ksize() the object.

Obviously this leaves quite a bit to be desired in terms of object
sizing accuracy, but the behaviour is unchanged over the existing
implementation, while fixing the page->index oopses originally reported
here:

http://marc.info/?l=linux-mm&m=121127773325245&w=2

Accuracy could also be improved by having SLUB and SLOB both set PG_slab
on ksizeable pages, rather than just handling the __GFP_COMP cases
irregardless of the PG_slab setting, as made possibly with Pekka's
patches:

http://marc.info/?l=linux-kernel&m=121139439900534&w=2
http://marc.info/?l=linux-kernel&m=121139440000537&w=2
http://marc.info/?l=linux-kernel&m=121139440000540&w=2

This is primarily a bugfix for nommu systems for 2.6.26, with the aim
being to gradually kill off kobjsize() and its particular brand of
object abuse entirely.

Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agom68k: enable CONFIG_COMPAT_BRK by default
Geert Uytterhoeven [Fri, 6 Jun 2008 05:46:07 +0000 (22:46 -0700)]
m68k: enable CONFIG_COMPAT_BRK by default

As some m68k machines have plenty of libc5 binaries in active use, enable
CONFIG_COMPAT_BRK by default.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agobrk: make sys_brk() honor COMPAT_BRK when computing lower bound
Jiri Kosina [Fri, 6 Jun 2008 05:46:05 +0000 (22:46 -0700)]
brk: make sys_brk() honor COMPAT_BRK when computing lower bound

Fix a regression introduced by

commit 4cc6028d4040f95cdb590a87db478b42b8be0508
Author: Jiri Kosina <jkosina@suse.cz>
Date:   Wed Feb 6 22:39:44 2008 +0100

    brk: check the lower bound properly

The check in sys_brk() on minimum value the brk might have must take
CONFIG_COMPAT_BRK setting into account.  When this option is turned on
(i.e.  we support ancient legacy binaries, e.g.  libc5-linked stuff), the
lower bound on brk value is mm->end_code, otherwise the brk start is
allowed to be arbitrarily shifted.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agodrivers/char/ip2: fix Kconfig after ip2/ip2main merge
Roland.Kletzing [Fri, 6 Jun 2008 05:46:04 +0000 (22:46 -0700)]
drivers/char/ip2: fix Kconfig after ip2/ip2main merge

As commit 6089093e588ee3f6aed99d08b1cf5ea37c52cf97 ("ip2: fix crashes on
load/unload") fixed the ip2 crashes on load/unload by making ip2/ip2main
one module (ip2), Kconfig shouldn't mention a now non-existing module.

Signed-off-by: Roland.Kletzing <devzero@web.de>
Acked-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoedd: fix incorrect return of 1 from module_init
Alexey Dobriyan [Fri, 6 Jun 2008 05:46:03 +0000 (22:46 -0700)]
edd: fix incorrect return of 1 from module_init

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoeCryptfs: remove unnecessary page decrypt call
Michael Halcrow [Fri, 6 Jun 2008 05:46:02 +0000 (22:46 -0700)]
eCryptfs: remove unnecessary page decrypt call

The page decrypt calls in ecryptfs_write() are both pointless and buggy.
Pointless because ecryptfs_get_locked_page() has already brought the page
up to date, and buggy because prior mmap writes will just be blown away by
the decrypt call.

This patch also removes the declaration of a now-nonexistent function
ecryptfs_write_zeros().

Thanks to Eric Sandeen and David Kleikamp for helping to track this
down.

Eric said:

   fsx w/ mmap dies quickly ( < 100 ops) without this, and survives
   nicely (to millions of ops+) with it in place.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoupdate checkpatch.pl to version 0.19
Andy Whitcroft [Fri, 6 Jun 2008 05:46:01 +0000 (22:46 -0700)]
update checkpatch.pl to version 0.19

This version is a bit of a whopper.  This version brings a few new checks,
improvements to a number of checks mostly through modifications to the
way types are parsed, several fixes to quote/comment handling, as well as
the usual slew of fixes for false positives.

Of note:
 - return is not a function and is now reported,
 - preprocessor directive detection is loosened to match C99 standard,
 - we now intuit new type modifiers, and
 - comment handling is much improved

Andy Whitcroft (18):
      Version: 0.19
      fix up a couple of missing newlines in reports
      colon to parenthesis spacing varies on asm
      values: #include is a preprocessor statement
      quotes: fix single character quotes at line end
      add typedef exception for the non-pointer "function types"
      kerneldoc parameters must be on one line, relax line length
      types: word boundary is not always required
      improved #define bracketing reports
      uninitialized_var is an annotation not a function name
      possible types: add possible modifier handling
      possible types: fastcall is a type modifier
      types: unsigned is not a modifier on all types
      static/external initialisation to zero should allow modifiers
      checkpatch: fix recognition of preprocessor directives -- part 2
      comments: fix inter-hunk comment tracking
      return is not a function
      do not report include/asm/foo.h use in include/linux/foo.h
      return is not a function -- tighten test

[jengelh@computergmbh.de: fix recognition of preprocessor directives]
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoserial: fix driver_name conflicts
Anton Vorontsov [Fri, 6 Jun 2008 05:45:58 +0000 (22:45 -0700)]
serial: fix driver_name conflicts

Some drivers are using too generic "serial" name for driver_name, this
might cause issues, like this:

Freescale QUICC Engine UART device driver
proc_dir_entry 'serial' already registered
Call Trace:
[cf82de50] [c0007f7c] show_stack+0x4c/0x1ac (unreliable)
[cf82de90] [c00b03fc] proc_register+0xfc/0x1ac
[cf82dec0] [c00b05c8] create_proc_entry+0x60/0xac
[cf82dee0] [c00b23dc] proc_tty_register_driver+0x60/0x98
[cf82def0] [c016dbd8] tty_register_driver+0x1b4/0x228
[cf82df20] [c0184d70] uart_register_driver+0x144/0x194
[cf82df40] [c030a378] ucc_uart_init+0x2c/0x94
[cf82df50] [c02f21a0] kernel_init+0x98/0x27c
[cf82dff0] [c000fa74] kernel_thread+0x44/0x60

^^ The board is using ucc_uart.c and 8250.c, both registered as
   "serial".

This patch fixes two drivers that are using "serial" for driver_name and
not "ttyS" for dev_name.  Drivers that are using "ttyS" for dev_name, will
conflict anyway, so we don't bother with these.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Alan Cox <alan@redhat.com>
Acked-By: Timur Tabi <timur@freescale.com>
Acked-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agohugetlb: fix lockdep error
Nick Piggin [Fri, 6 Jun 2008 05:45:57 +0000 (22:45 -0700)]
hugetlb: fix lockdep error

=============================================
[ INFO: possible recursive locking detected ]
2.6.26-rc4 #30
---------------------------------------------
heap-overflow/2250 is trying to acquire lock:
 (&mm->page_table_lock){--..}, at: [<c0000000000cf2e8>] .copy_hugetlb_page_range+0x108/0x280

but task is already holding lock:
 (&mm->page_table_lock){--..}, at: [<c0000000000cf2dc>] .copy_hugetlb_page_range+0xfc/0x280

other info that might help us debug this:
3 locks held by heap-overflow/2250:
 #0:  (&mm->mmap_sem){----}, at: [<c000000000050e44>] .dup_mm+0x134/0x410
 #1:  (&mm->mmap_sem/1){--..}, at: [<c000000000050e54>] .dup_mm+0x144/0x410
 #2:  (&mm->page_table_lock){--..}, at: [<c0000000000cf2dc>] .copy_hugetlb_page_range+0xfc/0x280

stack backtrace:
Call Trace:
[c00000003b2774e0] [c000000000010ce4] .show_stack+0x74/0x1f0 (unreliable)
[c00000003b2775a0] [c0000000003f10e0] .dump_stack+0x20/0x34
[c00000003b277620] [c0000000000889bc] .__lock_acquire+0xaac/0x1080
[c00000003b277740] [c000000000089000] .lock_acquire+0x70/0xb0
[c00000003b2777d0] [c0000000003ee15c] ._spin_lock+0x4c/0x80
[c00000003b277870] [c0000000000cf2e8] .copy_hugetlb_page_range+0x108/0x280
[c00000003b277950] [c0000000000bcaa8] .copy_page_range+0x558/0x790
[c00000003b277ac0] [c000000000050fe0] .dup_mm+0x2d0/0x410
[c00000003b277ba0] [c000000000051d24] .copy_process+0xb94/0x1020
[c00000003b277ca0] [c000000000052244] .do_fork+0x94/0x310
[c00000003b277db0] [c000000000011240] .sys_clone+0x60/0x80
[c00000003b277e30] [c0000000000078c4] .ppc_clone+0x8/0xc

Fix is the same way that mm/memory.c copy_page_range does the
lockdep annotation.

Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomodedb: fix incorrect sync and vmode flags for CVT modes
Krzysztof Helt [Fri, 6 Jun 2008 05:45:56 +0000 (22:45 -0700)]
modedb: fix incorrect sync and vmode flags for CVT modes

The temporary structure for calculated CVT mode is not initialized.  Few
fields have only bits or-ed or and-ed so they may be left in incorrect
(random) state.

Testing of the tridentfb seems like a good exercise for the fbdev layer.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofrv: don't offer BINFMT_FLAT
Adrian Bunk [Fri, 6 Jun 2008 05:45:55 +0000 (22:45 -0700)]
frv: don't offer BINFMT_FLAT

Fix the following compile error:

  CC      fs/binfmt_flat.o
In file included from
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:36:
/home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/flat.h:14:22: error: asm/flat.h: No such file or directory
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c: In function 'create_flat_tables':
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:124: error: implicit declaration of function 'flat_stack_align'
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:125: error: implicit declaration of function 'flat_argvp_envp_on_stack'
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c: In function 'calc_reloc':
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:347: error: implicit declaration of function 'flat_reloc_valid'
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c: In function 'load_flat_file':
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:479: error: implicit declaration of function 'flat_old_ram_flag'
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:755: error: implicit declaration of function 'flat_set_persistent'
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:757: error: implicit declaration of function 'flat_get_relocate_addr'
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:765: error: implicit declaration of function 'flat_get_addr_from_rp'
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:781: error: implicit declaration of function 'flat_put_addr_at_rp'

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Tested-by: David Howells <dhowells@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocpusets: fix and update Documentation
Miao Xie [Fri, 6 Jun 2008 05:45:54 +0000 (22:45 -0700)]
cpusets: fix and update Documentation

Make the doc consistent with current cpusets implementation.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Acked-by: Paul Jackson <pj@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomd: do not compute parity unless it is on a failed drive
Dan Williams [Fri, 6 Jun 2008 05:45:54 +0000 (22:45 -0700)]
md: do not compute parity unless it is on a failed drive

If a block is computed (rather than read) then a check/repair operation
may be lead to believe that the data on disk is correct, when infact it
isn't.  So only compute blocks for failed devices.

This issue has been around since at least 2.6.12, but has become harder to
hit in recent kernels since most reads bypass the cache.

echo repair > /sys/block/mdN/md/sync_action will set the parity blocks to the
correct state.

Cc: <stable@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomd: fix uninitialized use of mddev->recovery_wait
Dan Williams [Fri, 6 Jun 2008 05:45:53 +0000 (22:45 -0700)]
md: fix uninitialized use of mddev->recovery_wait

If an array was created with --assume-clean we will oops when trying to
set ->resync_max.

Fix this by initializing ->recovery_wait in mddev_find.

Cc: <stable@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>