Dan Carpenter [Wed, 2 Feb 2022 11:33:45 +0000 (12:33 +0100)]
greybus: svc: fix an error handling bug in gb_svc_hello()
commit
5f8583a3b7552092582a92e7bbd2153319929ad7 upstream.
Cleanup if gb_svc_queue_deferred_request() fails.
Link: https://lore.kernel.org/r/20220202072016.GA6748@kili
Fixes:
ee2f2074fdb2 ("greybus: svc: reconfig APBridgeA-Switch link to handle required load")
Cc: stable@vger.kernel.org # 4.9
[johan: fix commit summary prefix and rename label ]
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220202113347.1288-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liam Beguin [Sat, 8 Jan 2022 20:53:06 +0000 (15:53 -0500)]
iio: inkern: make a best effort on offset calculation
commit
ca85123354e1a65a22170286387b4791997fe864 upstream.
iio_convert_raw_to_processed_unlocked() assumes the offset is an
integer. Make a best effort to get a valid offset value for fractional
cases without breaking implicit truncations.
Fixes:
48e44ce0f881 ("iio:inkern: Add function to read the processed value")
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220108205319.2046348-4-liambeguin@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liam Beguin [Sat, 8 Jan 2022 20:53:05 +0000 (15:53 -0500)]
iio: inkern: apply consumer scale when no channel scale is available
commit
14b457fdde38de594a4bc4bd9075019319d978da upstream.
When a consumer calls iio_read_channel_processed() and no channel scale
is available, it's assumed that the scale is one and the raw value is
returned as expected.
On the other hand, if the consumer calls iio_convert_raw_to_processed()
the scaling factor requested by the consumer is not applied.
This for example causes the consumer to process mV when expecting uV.
Make sure to always apply the scaling factor requested by the consumer.
Fixes:
adc8ec5ff183 ("iio: inkern: pass through raw values if no scaling")
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220108205319.2046348-3-liambeguin@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liam Beguin [Sat, 8 Jan 2022 20:53:04 +0000 (15:53 -0500)]
iio: inkern: apply consumer scale on IIO_VAL_INT cases
commit
1bca97ff95c732a516ebb68da72814194980e0a5 upstream.
When a consumer calls iio_read_channel_processed() and the channel has
an integer scale, the scale channel scale is applied and the processed
value is returned as expected.
On the other hand, if the consumer calls iio_convert_raw_to_processed()
the scaling factor requested by the consumer is not applied.
This for example causes the consumer to process mV when expecting uV.
Make sure to always apply the scaling factor requested by the consumer.
Fixes:
48e44ce0f881 ("iio:inkern: Add function to read the processed value")
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220108205319.2046348-2-liambeguin@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liam Beguin [Sat, 8 Jan 2022 20:53:07 +0000 (15:53 -0500)]
iio: afe: rescale: use s64 for temporary scale calculations
commit
51593106b608ae4247cc8da928813347da16d025 upstream.
All four scaling coefficients can take signed values.
Make tmp a signed 64-bit integer and switch to div_s64() to preserve
signs during 64-bit divisions.
Fixes:
8b74816b5a9a ("iio: afe: rescale: new driver")
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220108205319.2046348-5-liambeguin@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miaoqian Lin [Mon, 24 Jan 2022 12:41:21 +0000 (12:41 +0000)]
coresight: syscfg: Fix memleak on registration failure in cscfg_create_device
commit
cfa5dbcdd7aece76f3415284569f2f384aff0253 upstream.
device_register() calls device_initialize(),
according to doc of device_initialize:
Use put_device() to give up your reference instead of freeing
* @dev directly once you have called this function.
To prevent potential memleak, use put_device() for error handling.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Fixes:
85e2414c518a ("coresight: syscfg: Initial coresight system configuration")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220124124121.8888-1-linmq006@gmail.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Clark [Thu, 20 Jan 2022 11:30:47 +0000 (11:30 +0000)]
coresight: Fix TRCCONFIGR.QE sysfs interface
commit
ea75a342aed5ed72c87f38fbe0df2f5df7eae374 upstream.
It's impossible to program a valid value for TRCCONFIGR.QE
when TRCIDR0.QSUPP==0b10. In that case the following is true:
Q element support is implemented, and only supports Q elements without
instruction counts. TRCCONFIGR.QE can only take the values 0b00 or 0b11.
Currently the low bit of QSUPP is checked to see if the low bit of QE can
be written to, but as you can see when QSUPP==0b10 the low bit is cleared
making it impossible to ever write the only valid value of 0b11 to QE.
0b10 would be written instead, which is a reserved QE value even for all
values of QSUPP.
The fix is to allow writing the low bit of QE for any non zero value of
QSUPP.
This change also ensures that the low bit is always set, even when the
user attempts to only set the high bit.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Fixes:
d8c66962084f ("coresight-etm4x: Controls pertaining to the reset, mode, pe and events")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220120113047.2839622-2-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Akira Yokosawa [Tue, 29 Mar 2022 06:07:02 +0000 (15:07 +0900)]
docs: sphinx/requirements: Limit jinja2<3.1
commit
be78837ca3c88eebd405103a7a2ce891c466b0db upstream.
jinja2 release 3.1.0 (March 24, 2022) broke Sphinx<4.0.
This looks like the result of deprecating Python 3.6.
It has been tested against Sphinx 4.3.0 and later.
Setting an upper limit of <3.1 to junja2 can unbreak Sphinx<4.0
including Sphinx 2.4.4.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/7dbff8a0-f4ff-34a0-71c7-1987baf471f9@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Davey [Tue, 1 Mar 2022 16:03:01 +0000 (21:33 +0530)]
bus: mhi: Fix MHI DMA structure endianness
commit
ed2d980503235829aa3e0c7ae3b82374c30a081c upstream.
The MHI driver does not work on big endian architectures. The
controller never transitions into mission mode. This appears to be due
to the modem device expecting the various contexts and transfer rings to
have fields in little endian order in memory, but the driver constructs
them in native endianness.
Fix MHI event, channel and command contexts and TRE handling macros to
use explicit conversion to little endian. Mark fields in relevant
structures as little endian to document this requirement.
Fixes:
a6e2e3522f29 ("bus: mhi: core: Add support for PM state transitions")
Fixes:
6cd330ae76ff ("bus: mhi: core: Add support for ringing channel/event ring doorbells")
Cc: stable@vger.kernel.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220301160308.107452-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yonglin Tan [Tue, 1 Mar 2022 16:02:59 +0000 (21:32 +0530)]
bus: mhi: pci_generic: Add mru_default for Quectel EM1xx series
commit
2413ffbf19a95cfcd7adf63135c5a9343a66d0a2 upstream.
For default mechanism, the driver uses default MRU 3500 if mru_default
is not initialized. The Qualcomm configured the MRU size to 32768 in the
WWAN device FW. So, we align the driver setting with Qualcomm FW setting.
Link: https://lore.kernel.org/r/MEYP282MB2374EE345DADDB591AFDA6AFFD2E9@MEYP282MB2374.AUSP282.PROD.OUTLOOK.COM
Fixes:
ac4bf60bbaa0 ("bus: mhi: pci_generic: Introduce quectel EM1XXGR-L support")
Cc: stable@vger.kernel.org
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Yonglin Tan <yonglin.tan@outlook.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220301160308.107452-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Usyskin [Tue, 8 Mar 2022 09:59:26 +0000 (11:59 +0200)]
mei: avoid iterator usage outside of list_for_each_entry
commit
c10187b1c5ebb8681ca467ab7b0ded5ea415d258 upstream.
Usage of the iterator outside of the list_for_each_entry
is considered harmful. https://lkml.org/lkml/2022/2/17/1032
Do not reference the loop variable outside of the loop,
by rearranging the orders of execution.
Instead of performing search loop and checking outside the loop
if the end of the list was hit and no matching element was found,
the execution is performed inside the loop upon a successful match
followed by a goto statement to the next step,
therefore no condition has to be performed after the loop has ended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20220308095926.300412-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Usyskin [Tue, 1 Mar 2022 07:11:15 +0000 (09:11 +0200)]
mei: me: add Alder Lake N device id.
commit
7bbbd0845818cffa9fa8ccfe52fa1cad58e7e4f2 upstream.
Add Alder Lake N device ID.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20220301071115.96145-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Usyskin [Tue, 15 Feb 2022 08:04:35 +0000 (10:04 +0200)]
mei: me: disable driver on the ign firmware
commit
ccdf6f806fbf559f7c29ed9302a7c1b4da7fd37f upstream.
Add a quirk to disable MEI interface on Intel PCH Ignition (IGN)
as the IGN firmware doesn't support the protocol.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20220215080438.264876-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anssi Hannula [Thu, 3 Mar 2022 11:08:57 +0000 (13:08 +0200)]
xhci: fix uninitialized string returned by xhci_decode_ctrl_ctx()
commit
05519b8589a679edb8fa781259893d20bece04ad upstream.
xhci_decode_ctrl_ctx() returns the untouched buffer as-is if both "drop"
and "add" parameters are zero.
Fix the function to return an empty string in that case.
It was not immediately clear from the possible call chains whether this
issue is currently actually triggerable or not.
Note that before commit
4843b4b5ec64 ("xhci: fix even more unsafe memory
usage in xhci tracing") the result effect in the failure case was different
as a static buffer was used here, but the code still worked incorrectly.
Fixes:
90d6d5731da7 ("xhci: Add tracing for input control context")
Cc: stable@vger.kernel.org
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
commit
4843b4b5ec64 ("xhci: fix even more unsafe memory usage in xhci tracing")
Link: https://lore.kernel.org/r/20220303110903.1662404-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Nyman [Thu, 3 Mar 2022 11:08:55 +0000 (13:08 +0200)]
xhci: make xhci_handshake timeout for xhci_reset() adjustable
commit
14073ce951b5919da450022c050772902f24f054 upstream.
xhci_reset() timeout was increased from 250ms to 10 seconds in order to
give Renesas 720201 xHC enough time to get ready in probe.
xhci_reset() is called with interrupts disabled in other places, and
waiting for 10 seconds there is not acceptable.
Add a timeout parameter to xhci_reset(), and adjust it back to 250ms
when called from xhci_stop() or xhci_shutdown() where interrupts are
disabled, and successful reset isn't that critical.
This solves issues when deactivating host mode on platforms like SM8450.
For now don't change the timeout if xHC is reset in xhci_resume().
No issues are reported for it, and we need the reset to succeed.
Locking around that reset needs to be revisited later.
Additionally change the signed integer timeout parameter in
xhci_handshake() to a u64 to match the timeout value we pass to
readl_poll_timeout_atomic()
Fixes:
22ceac191211 ("xhci: Increase reset timeout for Renesas 720201 host.")
Cc: stable@vger.kernel.org
Reported-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reported-by: Pavan Kondeti <quic_pkondeti@quicinc.com>
Tested-by: Pavan Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220303110903.1662404-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Henry Lin [Thu, 3 Mar 2022 11:08:58 +0000 (13:08 +0200)]
xhci: fix runtime PM imbalance in USB2 resume
commit
70c05e4cf63054cd755ca66c1819327b22cb085f upstream.
A race between system resume and device-initiated resume may result in
runtime PM imbalance on USB2 root hub. If a device-initiated resume
starts and system resume xhci_bus_resume() directs U0 before hub driver
sees the resuming device in RESUME state, device-initiated resume will
not be finished in xhci_handle_usb2_port_link_resume(). In this case,
usb_hcd_end_port_resume() call is missing.
This changes calls usb_hcd_end_port_resume() if resuming device reaches
U0 to keep runtime PM balance.
Fixes:
a231ec41e6f6 ("xhci: refactor U0 link state handling in get_port_status")
Cc: stable@vger.kernel.org
Signed-off-by: Henry Lin <henryl@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220303110903.1662404-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anssi Hannula [Thu, 3 Mar 2022 11:08:56 +0000 (13:08 +0200)]
xhci: fix garbage USBSTS being logged in some cases
commit
3105bc977d7cbf2edc35e24cc7e009686f6e4a56 upstream.
xhci_decode_usbsts() is expected to return a zero-terminated string by
its only caller, xhci_stop_endpoint_command_watchdog(), which directly
logs the return value:
xhci_warn(xhci, "USBSTS:%s\n", xhci_decode_usbsts(str, usbsts));
However, if no recognized bits are set in usbsts, the function will
return without having called any sprintf() and therefore return an
untouched non-zero-terminated caller-provided buffer, causing garbage
to be output to log.
Fix that by always including the raw value in the output.
Note that before commit
4843b4b5ec64 ("xhci: fix even more unsafe memory
usage in xhci tracing") the result effect in the failure case was different
as a static buffer was used here, but the code still worked incorrectly.
Fixes:
9c1aa36efdae ("xhci: Show host status when watchdog triggers and host is assumed dead.")
Cc: stable@vger.kernel.org
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220303110903.1662404-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Stern [Thu, 17 Mar 2022 20:39:10 +0000 (16:39 -0400)]
USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
commit
1892bf90677abcad7f06e897e308f5c3e3618dd4 upstream.
The kernel test robot found a problem with the ene_ub6250 subdriver in
usb-storage: It uses structures containing bitfields to represent
hardware bits in its SD_STATUS, MS_STATUS, and SM_STATUS bytes. This
is not safe; it presumes a particular bit ordering and it assumes the
compiler will not insert padding, neither of which is guaranteed.
This patch fixes the problem by changing the structures to simple u8
values, with the bitfields replaced by bitmask constants.
CC: <stable@vger.kernel.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YjOcbuU106UpJ/V8@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sven Peter [Sat, 26 Feb 2022 12:59:12 +0000 (13:59 +0100)]
usb: typec: tipd: Forward plug orientation to typec subsystem
commit
676748389f5db74e7d28f9d630eebd75cb8a11b4 upstream.
In order to bring up the USB3 PHY on the Apple M1 we need to know the
orientation of the Type-C cable. Extract it from the status register and
forward it to the typec subsystem.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20220226125912.59828-1-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lino Sanfilippo [Wed, 2 Mar 2022 09:43:53 +0000 (10:43 +0100)]
tpm: fix reference counting for struct tpm_chip
commit
7e0438f83dc769465ee663bb5dcf8cc154940712 upstream.
The following sequence of operations results in a refcount warning:
1. Open device /dev/tpmrm.
2. Remove module tpm_tis_spi.
3. Write a TPM command to the file descriptor opened at step 1.
------------[ cut here ]------------
WARNING: CPU: 3 PID: 1161 at lib/refcount.c:25 kobject_get+0xa0/0xa4
refcount_t: addition on 0; use-after-free.
Modules linked in: tpm_tis_spi tpm_tis_core tpm mdio_bcm_unimac brcmfmac
sha256_generic libsha256 sha256_arm hci_uart btbcm bluetooth cfg80211 vc4
brcmutil ecdh_generic ecc snd_soc_core crc32_arm_ce libaes
raspberrypi_hwmon ac97_bus snd_pcm_dmaengine bcm2711_thermal snd_pcm
snd_timer genet snd phy_generic soundcore [last unloaded: spi_bcm2835]
CPU: 3 PID: 1161 Comm: hold_open Not tainted 5.10.0ls-main-dirty #2
Hardware name: BCM2711
[<
c0410c3c>] (unwind_backtrace) from [<
c040b580>] (show_stack+0x10/0x14)
[<
c040b580>] (show_stack) from [<
c1092174>] (dump_stack+0xc4/0xd8)
[<
c1092174>] (dump_stack) from [<
c0445a30>] (__warn+0x104/0x108)
[<
c0445a30>] (__warn) from [<
c0445aa8>] (warn_slowpath_fmt+0x74/0xb8)
[<
c0445aa8>] (warn_slowpath_fmt) from [<
c08435d0>] (kobject_get+0xa0/0xa4)
[<
c08435d0>] (kobject_get) from [<
bf0a715c>] (tpm_try_get_ops+0x14/0x54 [tpm])
[<
bf0a715c>] (tpm_try_get_ops [tpm]) from [<
bf0a7d6c>] (tpm_common_write+0x38/0x60 [tpm])
[<
bf0a7d6c>] (tpm_common_write [tpm]) from [<
c05a7ac0>] (vfs_write+0xc4/0x3c0)
[<
c05a7ac0>] (vfs_write) from [<
c05a7ee4>] (ksys_write+0x58/0xcc)
[<
c05a7ee4>] (ksys_write) from [<
c04001a0>] (ret_fast_syscall+0x0/0x4c)
Exception stack(0xc226bfa8 to 0xc226bff0)
bfa0:
00000000 000105b4 00000003 beafe664 00000014 00000000
bfc0:
00000000 000105b4 000103f8 00000004 00000000 00000000 b6f9c000 beafe684
bfe0:
0000006c beafe648 0001056c b6eb6944
---[ end trace
d4b8409def9b8b1f ]---
The reason for this warning is the attempt to get the chip->dev reference
in tpm_common_write() although the reference counter is already zero.
Since commit
8979b02aaf1d ("tpm: Fix reference count to main device") the
extra reference used to prevent a premature zero counter is never taken,
because the required TPM_CHIP_FLAG_TPM2 flag is never set.
Fix this by moving the TPM 2 character device handling from
tpm_chip_alloc() to tpm_add_char_device() which is called at a later point
in time when the flag has been set in case of TPM2.
Commit
fdc915f7f719 ("tpm: expose spaces via a device link /dev/tpmrm<n>")
already introduced function tpm_devs_release() to release the extra
reference but did not implement the required put on chip->devs that results
in the call of this function.
Fix this by putting chip->devs in tpm_chip_unregister().
Finally move the new implementation for the TPM 2 handling into a new
function to avoid multiple checks for the TPM_CHIP_FLAG_TPM2 flag in the
good case and error cases.
Cc: stable@vger.kernel.org
Fixes:
fdc915f7f719 ("tpm: expose spaces via a device link /dev/tpmrm<n>")
Fixes:
8979b02aaf1d ("tpm: Fix reference count to main device")
Co-developed-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xie Yongji [Tue, 26 Oct 2021 14:40:15 +0000 (22:40 +0800)]
virtio-blk: Use blk_validate_block_size() to validate block size
commit
57a13a5b8157d9a8606490aaa1b805bafe6c37e1 upstream.
The block layer can't support a block size larger than
page size yet. And a block size that's too small or
not a power of two won't work either. If a misconfigured
device presents an invalid block size in configuration space,
it will result in the kernel crash something like below:
[ 506.154324] BUG: kernel NULL pointer dereference, address:
0000000000000008
[ 506.160416] RIP: 0010:create_empty_buffers+0x24/0x100
[ 506.174302] Call Trace:
[ 506.174651] create_page_buffers+0x4d/0x60
[ 506.175207] block_read_full_page+0x50/0x380
[ 506.175798] ? __mod_lruvec_page_state+0x60/0xa0
[ 506.176412] ? __add_to_page_cache_locked+0x1b2/0x390
[ 506.177085] ? blkdev_direct_IO+0x4a0/0x4a0
[ 506.177644] ? scan_shadow_nodes+0x30/0x30
[ 506.178206] ? lru_cache_add+0x42/0x60
[ 506.178716] do_read_cache_page+0x695/0x740
[ 506.179278] ? read_part_sector+0xe0/0xe0
[ 506.179821] read_part_sector+0x36/0xe0
[ 506.180337] adfspart_check_ICS+0x32/0x320
[ 506.180890] ? snprintf+0x45/0x70
[ 506.181350] ? read_part_sector+0xe0/0xe0
[ 506.181906] bdev_disk_changed+0x229/0x5c0
[ 506.182483] blkdev_get_whole+0x6d/0x90
[ 506.183013] blkdev_get_by_dev+0x122/0x2d0
[ 506.183562] device_add_disk+0x39e/0x3c0
[ 506.184472] virtblk_probe+0x3f8/0x79b [virtio_blk]
[ 506.185461] virtio_dev_probe+0x15e/0x1d0 [virtio]
So let's use a block layer helper to validate the block size.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20211026144015.188-5-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robin Murphy [Thu, 3 Mar 2022 14:40:08 +0000 (14:40 +0000)]
iommu/iova: Improve 32-bit free space estimate
commit
5b61343b50590fb04a3f6be2cdc4868091757262 upstream.
For various reasons based on the allocator behaviour and typical
use-cases at the time, when the max32_alloc_size optimisation was
introduced it seemed reasonable to couple the reset of the tracked
size to the update of cached32_node upon freeing a relevant IOVA.
However, since subsequent optimisations focused on helping genuine
32-bit devices make best use of even more limited address spaces, it
is now a lot more likely for cached32_node to be anywhere in a "full"
32-bit address space, and as such more likely for space to become
available from IOVAs below that node being freed.
At this point, the short-cut in __cached_rbnode_delete_update() really
doesn't hold up any more, and we need to fix the logic to reliably
provide the expected behaviour. We still want cached32_node to only move
upwards, but we should reset the allocation size if *any* 32-bit space
has become available.
Reported-by: Yunfei Wang <yf.wang@mediatek.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/033815732d83ca73b13c11485ac39336f15c3b40.1646318408.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Cc: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Tue, 25 Jan 2022 20:04:54 +0000 (15:04 -0500)]
drm/amdgpu: only check for _PR3 on dGPUs
commit
85ac2021fe3ace59cc0afd6edf005abad35625b0 upstream.
We don't support runtime pm on APUs. They support more
dynamic power savings using clock and powergating.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Mon, 24 Jan 2022 18:42:30 +0000 (13:42 -0500)]
drm/amdgpu: move PX checking into amdgpu_device_ip_early_init
commit
901e2be20dc55079997ea1885ea77fc72e6826e7 upstream.
We need to set the APU flag from IP discovery before
we evaluate this code.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Waiman Long [Mon, 3 Jan 2022 02:35:58 +0000 (21:35 -0500)]
locking/lockdep: Avoid potential access of invalid memory in lock_class
commit
61cc4534b6550997c97a03759ab46b29d44c0017 upstream.
It was found that reading /proc/lockdep after a lockdep splat may
potentially cause an access to freed memory if lockdep_unregister_key()
is called after the splat but before access to /proc/lockdep [1]. This
is due to the fact that graph_lock() call in lockdep_unregister_key()
fails after the clearing of debug_locks by the splat process.
After lockdep_unregister_key() is called, the lock_name may be freed
but the corresponding lock_class structure still have a reference to
it. That invalid memory pointer will then be accessed when /proc/lockdep
is read by a user and a use-after-free (UAF) error will be reported if
KASAN is enabled.
To fix this problem, lockdep_unregister_key() is now modified to always
search for a matching key irrespective of the debug_locks state and
zap the corresponding lock class if a matching one is found.
[1] https://lore.kernel.org/lkml/
77f05c15-81b6-bddd-9650-
80d5f23fe330@i-love.sakura.ne.jp/
Fixes:
8b39adbee805 ("locking/lockdep: Make lockdep_unregister_key() honor 'debug_locks' again")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Cc: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Link: https://lkml.kernel.org/r/20220103023558.1377055-1-longman@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yosry Ahmed [Wed, 16 Mar 2022 23:15:12 +0000 (16:15 -0700)]
selftests: vm: fix clang build error multiple output files
[ Upstream commit
1c4debc443ef7037dcb7c4f08c33b9caebd21d2e ]
When building the vm selftests using clang, some errors are seen due to
having headers in the compilation command:
clang -Wall -I ../../../../usr/include -no-pie gup_test.c ../../../../mm/gup_test.h -lrt -lpthread -o .../tools/testing/selftests/vm/gup_test
clang: error: cannot specify -o when generating multiple output files
make[1]: *** [../lib.mk:146: .../tools/testing/selftests/vm/gup_test] Error 1
Rework to add the header files to LOCAL_HDRS before including ../lib.mk,
since the dependency is evaluated in '$(OUTPUT)/%:%.c $(LOCAL_HDRS)' in
file lib.mk.
Link: https://lkml.kernel.org/r/20220304000645.1888133-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudiu Beznea [Fri, 11 Mar 2022 11:17:16 +0000 (13:17 +0200)]
net: dsa: microchip: add spi_device_id tables
[ Upstream commit
e981bc74aefc6a177b50c16cfa7023599799cf74 ]
Add spi_device_id tables to avoid logs like "SPI driver ksz9477-switch
has no spi_device_id".
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Haimin Zhang [Tue, 8 Mar 2022 03:20:28 +0000 (11:20 +0800)]
af_key: add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
[ Upstream commit
9a564bccb78a76740ea9d75a259942df8143d02c ]
Add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
to initialize the buffer of supp_skb to fix a kernel-info-leak issue.
1) Function pfkey_register calls compose_sadb_supported to request
a sk_buff. 2) compose_sadb_supported calls alloc_sbk to allocate
a sk_buff, but it doesn't zero it. 3) If auth_len is greater 0, then
compose_sadb_supported treats the memory as a struct sadb_supported and
begins to initialize. But it just initializes the field sadb_supported_len
and field sadb_supported_exttype without field sadb_supported_reserved.
Reported-by: TCS Robot <tcs_robot@tencent.com>
Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Linus Walleij [Fri, 4 Mar 2022 21:17:33 +0000 (13:17 -0800)]
Input: zinitix - do not report shadow fingers
[ Upstream commit
e941dc13fd3717122207d74539ab95da07ef797f ]
I observed the following problem with the BT404 touch pad
running the Phosh UI:
When e.g. typing on the virtual keyboard pressing "g" would
produce "ggg".
After some analysis it turns out the firmware reports that three
fingers hit that coordinate at the same time, finger 0, 2 and
4 (of the five available 0,1,2,3,4).
DOWN
Zinitix-TS 3-0020: finger 0 down (246, 395)
Zinitix-TS 3-0020: finger 1 up (0, 0)
Zinitix-TS 3-0020: finger 2 down (246, 395)
Zinitix-TS 3-0020: finger 3 up (0, 0)
Zinitix-TS 3-0020: finger 4 down (246, 395)
UP
Zinitix-TS 3-0020: finger 0 up (246, 395)
Zinitix-TS 3-0020: finger 2 up (246, 395)
Zinitix-TS 3-0020: finger 4 up (246, 395)
This is one touch and release: i.e. this is all reported on
touch (down) and release.
There is a field in the struct touch_event called finger_cnt
which is actually a bitmask of the fingers active in the
event.
Rename this field finger_mask as this matches the use contents
better, then use for_each_set_bit() to iterate over just the
fingers that are actally active.
Factor out a finger reporting function zinitix_report_fingers()
to handle all fingers.
Also be more careful in reporting finger down/up: we were
reporting every event with input_mt_report_slot_state(..., true);
but this should only be reported on finger down or move,
not on finger up, so also add code to check p->sub_status
to see what is happening and report correctly.
After this my Zinitix BT404 touchscreen report fingers
flawlessly.
The vendor drive I have notably does not use the "finger_cnt"
and contains obviously incorrect code like this:
if (touch_dev->touch_info.finger_cnt > MAX_SUPPORTED_FINGER_NUM)
touch_dev->touch_info.finger_cnt = MAX_SUPPORTED_FINGER_NUM;
As MAX_SUPPORTED_FINGER_NUM is an ordinal and the field is
a bitmask this seems quite confused.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220228233017.2270599-1-linus.walleij@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Biju Das [Wed, 16 Mar 2022 17:53:17 +0000 (17:53 +0000)]
spi: Fix erroneous sgs value with min_t()
[ Upstream commit
ebc4cb43ea5ada3db46c80156fca58a54b9bbca8 ]
While computing sgs in spi_map_buf(), the data type
used in min_t() for max_seg_size is 'unsigned int' where
as that of ctlr->max_dma_len is 'size_t'.
min_t(unsigned int,x,y) gives wrong results if one of x/y is
'size_t'
Consider the below examples on a 64-bit machine (ie size_t is
64-bits, and unsigned int is 32-bit).
case 1) min_t(unsigned int, 5, 0x100000001);
case 2) min_t(size_t, 5, 0x100000001);
Case 1 returns '1', where as case 2 returns '5'. As you can see
the result from case 1 is wrong.
This patch fixes the above issue by using the data type of the
parameters that are used in min_t with maximum data length.
Fixes: commit
1a4e53d2fc4f68aa ("spi: Fix invalid sgs value")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220316175317.465-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bartosz Golaszewski [Tue, 15 Mar 2022 16:52:05 +0000 (17:52 +0100)]
Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"
[ Upstream commit
56e337f2cf1326323844927a04e9dbce9a244835 ]
This reverts commit
fc328a7d1fcce263db0b046917a66f3aa6e68719.
This commit - while attempting to fix a regression - has caused a number
of other problems. As the fallout from it is more significant than the
initial problem itself, revert it for now before we find a correct
solution.
Link: https://lore.kernel.org/all/20220314192522.GA3031157@roeck-us.net/
Link: https://lore.kernel.org/stable/20220314155509.552218-1-michael@walle.cc/
Link: https://lore.kernel.org/all/20211217153555.9413-1-marcelo.jimenez@gmail.com/
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reported-and-bisected-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Michael Walle <michael@walle.cc>
Cc: Thorsten Leemhuis <linux@leemhuis.info>
Cc: Marcelo Roberto Jimenez <marcelo.jimenez@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Minghao Chi (CGEL ZTE) [Tue, 8 Mar 2022 06:43:09 +0000 (06:43 +0000)]
net:mcf8390: Use platform_get_irq() to get the interrupt
[ Upstream commit
2a760554dcba450d3ad61b32375b50ed6d59a87c ]
It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ)
for requesting IRQ's resources any more, as they can be not ready yet in
case of DT-booting.
platform_get_irq() instead is a recommended way for getting IRQ even if
it was not retrieved earlier.
It also makes code simpler because we're getting "int" value right away
and no conversion from resource to int is required.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Biju Das [Mon, 7 Mar 2022 18:48:43 +0000 (18:48 +0000)]
spi: Fix invalid sgs value
[ Upstream commit
1a4e53d2fc4f68aa654ad96d13ad042e1a8e8a7d ]
max_seg_size is unsigned int and it can have a value up to 2^32
(for eg:-RZ_DMAC driver sets dma_set_max_seg_size as U32_MAX)
When this value is used in min_t() as an integer type, it becomes
-1 and the value of sgs becomes 0.
Fix this issue by replacing the 'int' data type with 'unsigned int'
in min_t().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220307184843.9994-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marcelo Roberto Jimenez [Mon, 7 Mar 2022 09:57:24 +0000 (10:57 +0100)]
gpio: Revert regression in sysfs-gpio (gpiolib.c)
[ Upstream commit
fc328a7d1fcce263db0b046917a66f3aa6e68719 ]
Some GPIO lines have stopped working after the patch
commit
2ab73c6d8323f ("gpio: Support GPIO controllers without pin-ranges")
And this has supposedly been fixed in the following patches
commit
89ad556b7f96a ("gpio: Avoid using pin ranges with !PINCTRL")
commit
6dbbf84603961 ("gpiolib: Don't free if pin ranges are not defined")
But an erratic behavior where some GPIO lines work while others do not work
has been introduced.
This patch reverts those changes so that the sysfs-gpio interface works
properly again.
Signed-off-by: Marcelo Roberto Jimenez <marcelo.jimenez@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheyu Ma [Sat, 5 Mar 2022 14:55:04 +0000 (14:55 +0000)]
ethernet: sun: Free the coherent when failing in probing
[ Upstream commit
bb77bd31c281f70ec77c9c4f584950a779e05cf8 ]
When the driver fails to register net device, it should free the DMA
region first, and then do other cleanup.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefano Garzarella [Tue, 18 Jan 2022 15:06:31 +0000 (16:06 +0100)]
tools/virtio: fix virtio_test execution
[ Upstream commit
32f1b53fe8f03d962423ba81f8e92af5839814da ]
virtio_test hangs on __vring_new_virtqueue() because `vqs_list_lock`
is not initialized.
Let's initialize it in vdev_info_init().
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20220118150631.167015-1-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Si-Wei Liu [Sat, 15 Jan 2022 00:28:00 +0000 (19:28 -0500)]
vdpa/mlx5: should verify CTRL_VQ feature exists for MQ
[ Upstream commit
30c22f3816ffef8aa21a000e93c4ee1402a6ea65 ]
Per VIRTIO v1.1 specification, section 5.1.3.1 Feature bit requirements:
"VIRTIO_NET_F_MQ Requires VIRTIO_NET_F_CTRL_VQ".
There's assumption in the mlx5_vdpa multiqueue code that MQ must come
together with CTRL_VQ. However, there's nowhere in the upper layer to
guarantee this assumption would hold. Were there an untrusted driver
sending down MQ without CTRL_VQ, it would compromise various spots for
e.g. is_index_valid() and is_ctrl_vq_idx(). Although this doesn't end
up with immediate panic or security loophole as of today's code, the
chance for this to be taken advantage of due to future code change is
not zero.
Harden the crispy assumption by failing the set_driver_features() call
when seeing (MQ && !CTRL_VQ). For that end, verify_min_features() is
renamed to verify_driver_features() to reflect the fact that it now does
more than just validate the minimum features. verify_driver_features()
is now used to accommodate various checks against the driver features
for set_driver_features().
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Link: https://lore.kernel.org/r/1642206481-30721-3-git-send-email-si-wei.liu@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael S. Tsirkin [Tue, 5 Oct 2021 07:04:10 +0000 (03:04 -0400)]
virtio_console: break out of buf poll on remove
[ Upstream commit
0e7174b9d5877130fec41fb4a16e0c2ee4958d44 ]
A common pattern for device reset is currently:
vdev->config->reset(vdev);
.. cleanup ..
reset prevents new interrupts from arriving and waits for interrupt
handlers to finish.
However if - as is common - the handler queues a work request which is
flushed during the cleanup stage, we have code adding buffers / trying
to get buffers while device is reset. Not good.
This was reproduced by running
modprobe virtio_console
modprobe -r virtio_console
in a loop.
Fix this up by calling virtio_break_device + flush before reset.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1786239
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Palmer [Tue, 1 Mar 2022 10:43:49 +0000 (19:43 +0900)]
ARM: mstar: Select HAVE_ARM_ARCH_TIMER
[ Upstream commit
ea49432d184a6a09f84461604b7711a4e9f5ec9c ]
The mstar SoCs have an arch timer but HAVE_ARM_ARCH_TIMER wasn't
selected. If MSC313E_TIMER isn't selected then the kernel gets
stuck at boot because there are no timers available.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20220301104349.3040422-1-daniel@0x0f.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lina Wang [Sat, 26 Feb 2022 07:48:01 +0000 (15:48 +0800)]
xfrm: fix tunnel model fragmentation behavior
[ Upstream commit
4ff2980b6bd2aa6b4ded3ce3b7c0ccfab29980af ]
in tunnel mode, if outer interface(ipv4) is less, it is easily to let
inner IPV6 mtu be less than 1280. If so, a Packet Too Big ICMPV6 message
is received. When send again, packets are fragmentized with 1280, they
are still rejected with ICMPV6(Packet Too Big) by xfrmi_xmit2().
According to RFC4213 Section3.2.2:
if (IPv4 path MTU - 20) is less than 1280
if packet is larger than 1280 bytes
Send ICMPv6 "packet too big" with MTU=1280
Drop packet
else
Encapsulate but do not set the Don't Fragment
flag in the IPv4 header. The resulting IPv4
packet might be fragmented by the IPv4 layer
on the encapsulator or by some router along
the IPv4 path.
endif
else
if packet is larger than (IPv4 path MTU - 20)
Send ICMPv6 "packet too big" with
MTU = (IPv4 path MTU - 20).
Drop packet.
else
Encapsulate and set the Don't Fragment flag
in the IPv4 header.
endif
endif
Packets should be fragmentized with ipv4 outer interface, so change it.
After it is fragemtized with ipv4, there will be double fragmenation.
No.48 & No.51 are ipv6 fragment packets, No.48 is double fragmentized,
then tunneled with IPv4(No.49& No.50), which obey spec. And received peer
cannot decrypt it rightly.
48 2002::10 2002::11 1296(length) IPv6 fragment (off=0 more=y ident=0xa20da5bc nxt=50)
49 0x0000 (0) 2002::10 2002::11 1304 IPv6 fragment (off=0 more=y ident=0x7448042c nxt=44)
50 0x0000 (0) 2002::10 2002::11 200 ESP (SPI=0x00035000)
51 2002::10 2002::11 180 Echo (ping) request
52 0x56dc 2002::10 2002::11 248 IPv6 fragment (off=1232 more=n ident=0xa20da5bc nxt=50)
xfrm6_noneed_fragment has fixed above issues. Finally, it acted like below:
1 0x6206 192.168.1.138 192.168.1.1 1316 Fragmented IP protocol (proto=Encap Security Payload 50, off=0, ID=6206) [Reassembled in #2]
2 0x6206 2002::10 2002::11 88 IPv6 fragment (off=0 more=y ident=0x1f440778 nxt=50)
3 0x0000 2002::10 2002::11 248 ICMPv6 Echo (ping) request
Signed-off-by: Lina Wang <lina.wang@mediatek.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Hübner [Thu, 20 Jan 2022 07:40:48 +0000 (08:40 +0100)]
HID: Add support for open wheel and no attachment to T300
[ Upstream commit
0a5a587501b54e8c6d86960b047d4491fd40dcf2 ]
Different add ons to the wheel base report different models. Having
no wheel mounted to the base and using the open wheel attachment is
added here.
Signed-off-by: Michael Hübner <michaelh.95@t-online.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lucas Zampieri [Wed, 26 Jan 2022 14:44:00 +0000 (11:44 -0300)]
HID: logitech-dj: add new lightspeed receiver id
[ Upstream commit
25666e8ccd952627899b09b68f7c9b68cfeaf028 ]
As of logitech lightspeed receiver fw version 04.02.B0009,
HIDPP_PARAM_DEVICE_INFO is being reported as 0x11.
With patch "HID: logitech-dj: add support for the new lightspeed receiver
iteration", the mouse starts to error out with:
logitech-djreceiver: unusable device of type UNKNOWN (0x011) connected on
slot 1
and becomes unusable.
This has been noticed on a Logitech G Pro X Superlight fw MPM 25.01.B0018.
Signed-off-by: Lucas Zampieri <lzampier@redhat.com>
Acked-by: Nestor Lopez Casado <nlopezcasad@logitech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Fri, 26 Nov 2021 02:33:16 +0000 (18:33 -0800)]
hv: utils: add PTP_1588_CLOCK to Kconfig to fix build
commit
1dc2f2b81a6a9895da59f3915760f6c0c3074492 upstream.
The hyperv utilities use PTP clock interfaces and should depend a
a kconfig symbol such that they will be built as a loadable module or
builtin so that linker errors do not happen.
Prevents these build errors:
ld: drivers/hv/hv_util.o: in function `hv_timesync_deinit':
hv_util.c:(.text+0x37d): undefined reference to `ptp_clock_unregister'
ld: drivers/hv/hv_util.o: in function `hv_timesync_init':
hv_util.c:(.text+0x738): undefined reference to `ptp_clock_register'
Fixes:
3716a49a81ba ("hv_utils: implement Hyper-V PTP source")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: linux-hyperv@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211126023316.25184-1-rdunlap@infradead.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Cc: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Muchun Song [Sun, 27 Mar 2022 05:18:52 +0000 (13:18 +0800)]
mm: kfence: fix missing objcg housekeeping for SLAB
commit
ae085d7f9365de7da27ab5c0d16b12d51ea7fca9 upstream.
The objcg is not cleared and put for kfence object when it is freed,
which could lead to memory leak for struct obj_cgroup and wrong
statistics of NR_SLAB_RECLAIMABLE_B or NR_SLAB_UNRECLAIMABLE_B.
Since the last freed object's objcg is not cleared,
mem_cgroup_from_obj() could return the wrong memcg when this kfence
object, which is not charged to any objcgs, is reallocated to other
users.
A real word issue [1] is caused by this bug.
Link: https://lore.kernel.org/all/000000000000cabcb505dae9e577@google.com/
Reported-by: syzbot+f8c45ccc7d5d45fc5965@syzkaller.appspotmail.com
Fixes:
d3fb45f370d9 ("mm, kfence: insert KFENCE hooks for SLAB")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Mon, 28 Feb 2022 08:49:19 +0000 (09:49 +0100)]
USB: serial: simple: add Nokia phone driver
commit
c4b9c570965f75d0d55e639747f1e5ccdad2fae0 upstream.
Add a new "simple" driver for certain Nokia phones, including Nokia 130
(RM-1035) which exposes two serial ports in "charging only" mode:
Bus 001 Device 009: ID 0421:069a Nokia Mobile Phones 130 [RM-1035] (Charging only)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0421 Nokia Mobile Phones
idProduct 0x069a 130 [RM-1035] (Charging only)
bcdDevice 1.00
iManufacturer 1 Nokia
iProduct 2 Nokia 130 (RM-1035)
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0037
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220228084919.10656-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Mon, 7 Mar 2022 14:23:19 +0000 (15:23 +0100)]
USB: serial: pl2303: fix GS type detection
commit
5b6ab28d06780c87320ceade61698bb6719c85db upstream.
At least some PL2303GS have a bcdDevice of 0x605 instead of 0x100 as the
datasheet claims. Add it to the list of known release numbers for the
HXN (G) type.
Fixes:
894758d0571d ("USB: serial: pl2303: tighten type HXN (G) detection")
Reported-by: Matyáš Kroupa <kroupa.matyas@gmail.com>
Link: https://lore.kernel.org/r/165de6a0-43e9-092c-2916-66b115c7fbf4@gmail.com
Cc: stable@vger.kernel.org # 5.13
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Mon, 14 Mar 2022 18:18:30 +0000 (19:18 +0100)]
dt-bindings: usb: hcd: correct usb-device path
commit
801109b1a37ad99784e6370cc7e462596f505ea3 upstream.
The usb-device.yaml reference is absolute so it should use /schemas part
in path.
Fixes:
23bf6fc7046c ("dt-bindings: usb: convert usb-device.txt to YAML schema")
Cc: <stable@vger.kernel.org>
Reported-by: Rob Herring <robh@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220314181830.245853-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eddie James [Tue, 1 Mar 2022 22:44:46 +0000 (16:44 -0600)]
USB: serial: pl2303: add IBM device IDs
commit
e1d15646565b284e9ef2433234d6cfdaf66695f1 upstream.
IBM manufactures a PL2303 device for UPS communications. Add the vendor
and product IDs so that the PL2303 driver binds to the device.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20220301224446.21236-1-eajames@linux.ibm.com
Cc: stable@vger.kernel.org
[ johan: amend the SoB chain ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sat, 26 Mar 2022 17:42:04 +0000 (10:42 -0700)]
Revert "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""
commit
bddac7c1e02ba47f0570e494c9289acea3062cc1 upstream.
This reverts commit
aa6f8dcbab473f3a3c7454b74caa46d36cdc5d13.
It turns out this breaks at least the ath9k wireless driver, and
possibly others.
What the ath9k driver does on packet receive is to set up the DMA
transfer with:
int ath_rx_init(..)
..
bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
common->rx_bufsize,
DMA_FROM_DEVICE);
and then the receive logic (through ath_rx_tasklet()) will fetch
incoming packets
static bool ath_edma_get_buffers(..)
..
dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr,
common->rx_bufsize, DMA_FROM_DEVICE);
ret = ath9k_hw_process_rxdesc_edma(ah, rs, skb->data);
if (ret == -EINPROGRESS) {
/*let device gain the buffer again*/
dma_sync_single_for_device(sc->dev, bf->bf_buf_addr,
common->rx_bufsize, DMA_FROM_DEVICE);
return false;
}
and it's worth noting how that first DMA sync:
dma_sync_single_for_cpu(..DMA_FROM_DEVICE);
is there to make sure the CPU can read the DMA buffer (possibly by
copying it from the bounce buffer area, or by doing some cache flush).
The iommu correctly turns that into a "copy from bounce bufer" so that
the driver can look at the state of the packets.
In the meantime, the device may continue to write to the DMA buffer, but
we at least have a snapshot of the state due to that first DMA sync.
But that _second_ DMA sync:
dma_sync_single_for_device(..DMA_FROM_DEVICE);
is telling the DMA mapping that the CPU wasn't interested in the area
because the packet wasn't there. In the case of a DMA bounce buffer,
that is a no-op.
Note how it's not a sync for the CPU (the "for_device()" part), and it's
not a sync for data written by the CPU (the "DMA_FROM_DEVICE" part).
Or rather, it _should_ be a no-op. That's what commit
aa6f8dcbab47
broke: it made the code bounce the buffer unconditionally, and changed
the DMA_FROM_DEVICE to just unconditionally and illogically be
DMA_TO_DEVICE.
[ Side note: purely within the confines of the swiotlb driver it wasn't
entirely illogical: The reason it did that odd DMA_FROM_DEVICE ->
DMA_TO_DEVICE conversion thing is because inside the swiotlb driver,
it uses just a swiotlb_bounce() helper that doesn't care about the
whole distinction of who the sync is for - only which direction to
bounce.
So it took the "sync for device" to mean that the CPU must have been
the one writing, and thought it meant DMA_TO_DEVICE. ]
Also note how the commentary in that commit was wrong, probably due to
that whole confusion, claiming that the commit makes the swiotlb code
"bounce unconditionally (that is, also
when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale
data from the swiotlb buffer"
which is nonsensical for two reasons:
- that "also when dir == DMA_TO_DEVICE" is nonsensical, as that was
exactly when it always did - and should do - the bounce.
- since this is a sync for the device (not for the CPU), we're clearly
fundamentally not coping back stale data from the bounce buffers at
all, because we'd be copying *to* the bounce buffers.
So that commit was just very confused. It confused the direction of the
synchronization (to the device, not the cpu) with the direction of the
DMA (from the device).
Reported-and-bisected-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reported-by: Olha Cherevyk <olha.cherevyk@gmail.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Toke Høiland-Jørgensen <toke@toke.dk>
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 28 Mar 2022 07:58:46 +0000 (09:58 +0200)]
Linux 5.15.32
Link: https://lore.kernel.org/r/20220325150419.931802116@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Fri, 25 Mar 2022 03:58:27 +0000 (20:58 -0700)]
llc: only change llc->dev when bind() succeeds
commit
2d327a79ee176930dc72c131a970c891d367c1dc upstream.
My latest patch, attempting to fix the refcount leak in a minimal
way turned out to add a new bug.
Whenever the bind operation fails before we attempt to grab
a reference count on a device, we might release the device refcount
of a prior successful bind() operation.
syzbot was not happy about this [1].
Note to stable teams:
Make sure commit
b37a46683739 ("netdevice: add the case if dev is NULL")
is already present in your trees.
[1]
general protection fault, probably for non-canonical address 0xdffffc0000000070: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000380-0x0000000000000387]
CPU: 1 PID: 3590 Comm: syz-executor361 Tainted: G W 5.17.0-syzkaller-04796-g169e77764adc #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:llc_ui_connect+0x400/0xcb0 net/llc/af_llc.c:500
Code: 80 3c 02 00 0f 85 fc 07 00 00 4c 8b a5 38 05 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d bc 24 80 03 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 a9 07 00 00 49 8b b4 24 80 03 00 00 4c 89 f2 48
RSP: 0018:
ffffc900038cfcc0 EFLAGS:
00010202
RAX:
dffffc0000000000 RBX:
ffff8880756eb600 RCX:
0000000000000000
RDX:
0000000000000070 RSI:
ffffc900038cfe3e RDI:
0000000000000380
RBP:
ffff888015ee5000 R08:
0000000000000001 R09:
ffff888015ee5535
R10:
ffffed1002bdcaa6 R11:
0000000000000000 R12:
0000000000000000
R13:
ffffc900038cfe37 R14:
ffffc900038cfe38 R15:
ffff888015ee5012
FS:
0000555555acd300(0000) GS:
ffff8880b9d00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000020000280 CR3:
0000000077db6000 CR4:
00000000003506e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
__sys_connect_file+0x155/0x1a0 net/socket.c:1900
__sys_connect+0x161/0x190 net/socket.c:1917
__do_sys_connect net/socket.c:1927 [inline]
__se_sys_connect net/socket.c:1924 [inline]
__x64_sys_connect+0x6f/0xb0 net/socket.c:1924
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f016acb90b9
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007ffd417947f8 EFLAGS:
00000246 ORIG_RAX:
000000000000002a
RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f016acb90b9
RDX:
0000000000000010 RSI:
0000000020000140 RDI:
0000000000000003
RBP:
00007f016ac7d0a0 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007f016ac7d130
R13:
0000000000000000 R14:
0000000000000000 R15:
0000000000000000
</TASK>
Modules linked in:
---[ end trace
0000000000000000 ]---
RIP: 0010:llc_ui_connect+0x400/0xcb0 net/llc/af_llc.c:500
Fixes:
764f4eb6846f ("llc: fix netdevice reference leaks in llc_ui_bind()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: 赵子轩 <beraphin@gmail.com>
Cc: Stoyan Manolov <smanolov@suse.de>
Link: https://lore.kernel.org/r/20220325035827.360418-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 14 Feb 2022 14:48:14 +0000 (15:48 +0100)]
nds32: fix access_ok() checks in get/put_user
commit
8926d88ced46700bf6117ceaf391480b943ea9f4 upstream.
The get_user()/put_user() functions are meant to check for
access_ok(), while the __get_user()/__put_user() functions
don't.
This broke in 4.19 for nds32, when it gained an extraneous
check in __get_user(), but lost the check it needs in
__put_user().
Fixes:
487913ab18c2 ("nds32: Extract the checking and getting pointer to a macro")
Cc: stable@vger.kernel.org @ v4.19+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Tue, 15 Feb 2022 16:59:41 +0000 (17:59 +0100)]
m68k: fix access_ok for coldfire
commit
26509034bef198525d5936c116cbd0c3fa491c0b upstream.
While most m68k platforms use separate address spaces for user
and kernel space, at least coldfire does not, and the other
ones have a TASK_SIZE that is less than the entire 4GB address
range.
Using the default implementation of __access_ok() stops coldfire
user space from trivially accessing kernel memory.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan O'Donoghue [Tue, 25 Jan 2022 00:40:46 +0000 (00:40 +0000)]
wcn36xx: Differentiate wcn3660 from wcn3620
commit
98d504a82cc75840bec8e3c6ae0e4f411921962b upstream.
The spread of capability between the three WiFi silicon parts wcn36xx
supports is:
wcn3620 - 802.11 a/b/g
wcn3660 - 802.11 a/b/g/n
wcn3680 - 802.11 a/b/g/n/ac
We currently treat wcn3660 as wcn3620 thus limiting it to 2GHz channels.
Fix this regression by ensuring we differentiate between all three parts.
Fixes:
8490987bdb9a ("wcn36xx: Hook and identify RF_IRIS_WCN3680")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220125004046.4058284-1-bryan.odonoghue@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Bottomley [Mon, 7 Mar 2022 20:58:03 +0000 (15:58 -0500)]
tpm: use try_get_ops() in tpm-space.c
commit
fb5abce6b2bb5cb3d628aaa63fa821da8c4600f9 upstream.
As part of the series conversion to remove nested TPM operations:
https://lore.kernel.org/all/
20190205224723.19671-1-jarkko.sakkinen@linux.intel.com/
exposure of the chip->tpm_mutex was removed from much of the upper
level code. In this conversion, tpm2_del_space() was missed. This
didn't matter much because it's usually called closely after a
converted operation, so there's only a very tiny race window where the
chip can be removed before the space flushing is done which causes a
NULL deref on the mutex. However, there are reports of this window
being hit in practice, so fix this by converting tpm2_del_space() to
use tpm_try_get_ops(), which performs all the teardown checks before
acquring the mutex.
Cc: stable@vger.kernel.org # 5.4.x
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Lüssing [Thu, 10 Mar 2022 18:35:13 +0000 (19:35 +0100)]
mac80211: fix potential double free on mesh join
commit
4a2d4496e15ea5bb5c8e83b94ca8ca7fb045e7d3 upstream.
While commit
6a01afcf8468 ("mac80211: mesh: Free ie data when leaving
mesh") fixed a memory leak on mesh leave / teardown it introduced a
potential memory corruption caused by a double free when rejoining the
mesh:
ieee80211_leave_mesh()
-> kfree(sdata->u.mesh.ie);
...
ieee80211_join_mesh()
-> copy_mesh_setup()
-> old_ie = ifmsh->ie;
-> kfree(old_ie);
This double free / kernel panics can be reproduced by using wpa_supplicant
with an encrypted mesh (if set up without encryption via "iw" then
ifmsh->ie is always NULL, which avoids this issue). And then calling:
$ iw dev mesh0 mesh leave
$ iw dev mesh0 mesh join my-mesh
Note that typically these commands are not used / working when using
wpa_supplicant. And it seems that wpa_supplicant or wpa_cli are going
through a NETDEV_DOWN/NETDEV_UP cycle between a mesh leave and mesh join
where the NETDEV_UP resets the mesh.ie to NULL via a memcpy of
default_mesh_setup in cfg80211_netdev_notifier_call, which then avoids
the memory corruption, too.
The issue was first observed in an application which was not using
wpa_supplicant but "Senf" instead, which implements its own calls to
nl80211.
Fixing the issue by removing the kfree()'ing of the mesh IE in the mesh
join function and leaving it solely up to the mesh leave to free the
mesh IE.
Cc: stable@vger.kernel.org
Fixes:
6a01afcf8468 ("mac80211: mesh: Free ie data when leaving mesh")
Reported-by: Matthias Kretschmer <mathias.kretschmer@fit.fraunhofer.de>
Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
Tested-by: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de>
Link: https://lore.kernel.org/r/20220310183513.28589-1-linus.luessing@c0d3.blue
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Thu, 10 Feb 2022 15:24:30 +0000 (16:24 +0100)]
uaccess: fix integer overflow on access_ok()
commit
222ca305c9fd39e5ed8104da25c09b2b79a516a8 upstream.
Three architectures check the end of a user access against the
address limit without taking a possible overflow into account.
Passing a negative length or another overflow in here returns
success when it should not.
Use the most common correct implementation here, which optimizes
for a constant 'size' argument, and turns the common case into a
single comparison.
Cc: stable@vger.kernel.org
Fixes:
da551281947c ("csky: User access")
Fixes:
f663b60f5215 ("microblaze: Fix uaccess_ok macro")
Fixes:
7567746e1c0d ("Hexagon: Add user access functions")
Reported-by: David Laight <David.Laight@aculab.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul E. McKenney [Fri, 21 Jan 2022 20:40:08 +0000 (12:40 -0800)]
rcu: Don't deboost before reporting expedited quiescent state
commit
10c535787436d62ea28156a4b91365fd89b5a432 upstream.
Currently rcu_preempt_deferred_qs_irqrestore() releases rnp->boost_mtx
before reporting the expedited quiescent state. Under heavy real-time
load, this can result in this function being preempted before the
quiescent state is reported, which can in turn prevent the expedited grace
period from completing. Tim Murray reports that the resulting expedited
grace periods can take hundreds of milliseconds and even more than one
second, when they should normally complete in less than a millisecond.
This was fine given that there were no particular response-time
constraints for synchronize_rcu_expedited(), as it was designed
for throughput rather than latency. However, some users now need
sub-100-millisecond response-time constratints.
This patch therefore follows Neeraj's suggestion (seconded by Tim and
by Uladzislau Rezki) of simply reversing the two operations.
Reported-by: Tim Murray <timmurray@google.com>
Reported-by: Joel Fernandes <joelaf@google.com>
Reported-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Tested-by: Tim Murray <timmurray@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roberto Sassu [Mon, 13 Dec 2021 18:31:22 +0000 (19:31 +0100)]
drm/virtio: Ensure that objs is not NULL in virtio_gpu_array_put_free()
commit
6b79f96f4a23846516e5e6e4dd37fc06f43a60dd upstream.
If virtio_gpu_object_shmem_init() fails (e.g. due to fault injection, as it
happened in the bug report by syzbot), virtio_gpu_array_put_free() could be
called with objs equal to NULL.
Ensure that objs is not NULL in virtio_gpu_array_put_free(), or otherwise
return from the function.
Cc: stable@vger.kernel.org # 5.13.x
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reported-by: syzbot+e9072e90624a31dfa85f@syzkaller.appspotmail.com
Fixes:
377f8331d0565 ("drm/virtio: fix possible leak/unlock virtio_gpu_object_array")
Link: http://patchwork.freedesktop.org/patch/msgid/20211213183122.838119-1-roberto.sassu@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Norris [Fri, 25 Feb 2022 09:44:32 +0000 (11:44 +0200)]
Revert "ath: add support for special 0x0 regulatory domain"
commit
1ec7ed5163c70a0d040150d2279f932c7e7c143f upstream.
This reverts commit
2dc016599cfa9672a147528ca26d70c3654a5423.
Users are reporting regressions in regulatory domain detection and
channel availability.
The problem this was trying to resolve was fixed in firmware anyway:
QCA6174 hw3.0: sdio-4.4.1: add firmware.bin_WLAN.RMH.4.4.1-00042
https://github.com/kvalo/ath10k-firmware/commit/
4d382787f0efa77dba40394e0bc604f8eff82552
Link: https://bbs.archlinux.org/viewtopic.php?id=254535
Link: http://lists.infradead.org/pipermail/ath10k/2020-April/014871.html
Link: http://lists.infradead.org/pipermail/ath10k/2020-May/015152.html
Link: https://lore.kernel.org/all/1c160dfb-6ccc-b4d6-76f6-4364e0adb6dd@reox.at/
Fixes:
2dc016599cfa ("ath: add support for special 0x0 regulatory domain")
Cc: <stable@vger.kernel.org>
Cc: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20200527165718.129307-1-briannorris@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Wed, 19 Jan 2022 20:18:37 +0000 (14:18 -0600)]
Bluetooth: btusb: Add one more Bluetooth part for the Realtek RTL8852AE
commit
2e7b4a328ed6ea57d22853939e69bc86c560996d upstream.
This Realtek device has both wifi and BT components. The latter reports
a USB ID of 0bda:2852, which is not in the table.
BT device description in /sys/kernel/debug/usb/devices contains the following entries:
T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=2852 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=
00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
The missing USB_ID was reported by user trius65 at https://github.com/lwfinger/rtw89/issues/122
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable@vger.kernel.org
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Giovanni Cabiddu [Fri, 4 Mar 2022 17:54:47 +0000 (17:54 +0000)]
crypto: qat - disable registration of algorithms
commit
8893d27ffcaf6ec6267038a177cb87bcde4dd3de upstream.
The implementations of aead and skcipher in the QAT driver do not
support properly requests with the CRYPTO_TFM_REQ_MAY_BACKLOG flag set.
If the HW queue is full, the driver returns -EBUSY but does not enqueue
the request.
This can result in applications like dm-crypt waiting indefinitely for a
completion of a request that was never submitted to the hardware.
To avoid this problem, disable the registration of all crypto algorithms
in the QAT driver by setting the number of crypto instances to 0 at
configuration time.
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Werner Sembach [Tue, 15 Mar 2022 19:02:28 +0000 (20:02 +0100)]
ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU
commit
c844d22fe0c0b37dc809adbdde6ceb6462c43acf upstream.
Clevo NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2 have both a working
native and video interface. However the default detection mechanism first
registers the video interface before unregistering it again and switching
to the native interface during boot. This results in a dangling SBIOS
request for backlight change for some reason, causing the backlight to
switch to ~2% once per boot on the first power cord connect or disconnect
event. Setting the native interface explicitly circumvents this buggy
behaviour by avoiding the unregistering process.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maximilian Luz [Sun, 13 Feb 2022 15:49:20 +0000 (16:49 +0100)]
ACPI: battery: Add device HID and quirk for Microsoft Surface Go 3
commit
7dacee0b9efc8bd061f097b1a8d4daa6591af0c6 upstream.
For some reason, the Microsoft Surface Go 3 uses the standard ACPI
interface for battery information, but does not use the standard PNP0C0A
HID. Instead it uses MSHW0146 as identifier. Add that ID to the driver
as this seems to work well.
Additionally, the power state is not updated immediately after the AC
has been (un-)plugged, so add the respective quirk for that.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Cilissen [Mon, 7 Mar 2022 03:16:58 +0000 (04:16 +0100)]
ACPI / x86: Work around broken XSDT on Advantech DAC-BJ01 board
commit
e702196bf85778f2c5527ca47f33ef2e2fca8297 upstream.
On this board the ACPI RSDP structure points to both a RSDT and an XSDT,
but the XSDT points to a truncated FADT. This causes all sorts of trouble
and usually a complete failure to boot after the following error occurs:
ACPI Error: Unsupported address space: 0x20 (*/hwregs-*)
ACPI Error: AE_SUPPORT, Unable to initialize fixed events (*/evevent-*)
ACPI: Unable to start ACPI Interpreter
This leaves the ACPI implementation in such a broken state that subsequent
kernel subsystem initialisations go wrong, resulting in among others
mismapped PCI memory, SATA and USB enumeration failures, and freezes.
As this is an older embedded platform that will likely never see any BIOS
updates to address this issue and its default shipping OS only complies to
ACPI 1.0, work around this by forcing `acpi=rsdt`. This patch, applied on
top of Linux 5.10.102, was confirmed on real hardware to fix the issue.
Signed-off-by: Mark Cilissen <mark@yotsuba.nl>
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pablo Neira Ayuso [Thu, 17 Mar 2022 10:59:26 +0000 (11:59 +0100)]
netfilter: nf_tables: validate registers coming from userspace.
commit
6e1acfa387b9ff82cfc7db8cc3b6959221a95851 upstream.
Bail out in case userspace uses unsupported registers.
Fixes:
49499c3e6e18 ("netfilter: nf_tables: switch registers to 32 bit addressing")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pablo Neira Ayuso [Thu, 17 Mar 2022 11:04:42 +0000 (12:04 +0100)]
netfilter: nf_tables: initialize registers in nft_do_chain()
commit
4c905f6740a365464e91467aa50916555b28213d upstream.
Initialize registers to avoid stack leak into userspace.
Fixes:
96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephane Graber [Tue, 22 Mar 2022 22:42:06 +0000 (18:42 -0400)]
drivers: net: xgene: Fix regression in CRC stripping
commit
e9e6faeafaa00da1851bcf47912b0f1acae666b4 upstream.
All packets on ingress (except for jumbo) are terminated with a 4-bytes
CRC checksum. It's the responsability of the driver to strip those 4
bytes. Unfortunately a change dating back to March 2017 re-shuffled some
code and made the CRC stripping code effectively dead.
This change re-orders that part a bit such that the datalen is
immediately altered if needed.
Fixes:
4902a92270fb ("drivers: net: xgene: Add workaround for errata 10GE_8/ENET_11")
Cc: stable@vger.kernel.org
Signed-off-by: Stephane Graber <stgraber@ubuntu.com>
Tested-by: Stephane Graber <stgraber@ubuntu.com>
Link: https://lore.kernel.org/r/20220322224205.752795-1-stgraber@ubuntu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Giacomo Guiduzzi [Tue, 22 Mar 2022 20:06:54 +0000 (21:06 +0100)]
ALSA: pci: fix reading of swapped values from pcmreg in AC97 codec
commit
17aaf0193392cb3451bf0ac75ba396ec4cbded6e upstream.
Tests 72 and 78 for ALSA in kselftest fail due to reading
inconsistent values from some devices on a VirtualBox
Virtual Machine using the snd_intel8x0 driver for the AC'97
Audio Controller device.
Taking for example test number 72, this is what the test reports:
"Surround Playback Volume.0 expected 1 but read 0, is_volatile 0"
"Surround Playback Volume.1 expected 0 but read 1, is_volatile 0"
These errors repeat for each value from 0 to 31.
Taking a look at these error messages it is possible to notice
that the written values are read back swapped.
When the write is performed, these values are initially stored in
an array used to sanity-check them and write them in the pcmreg
array. To write them, the two one-byte values are packed together
in a two-byte variable through bitwise operations: the first
value is shifted left by one byte and the second value is stored in the
right byte through a bitwise OR. When reading the values back,
right shifts are performed to retrieve the previously stored
bytes. These shifts are executed in the wrong order, thus
reporting the values swapped as shown above.
This patch fixes this mistake by reversing the read
operations' order.
Signed-off-by: Giacomo Guiduzzi <guiduzzi.giacomo@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220322200653.15862-1-guiduzzi.giacomo@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan Teh [Sun, 13 Mar 2022 19:56:17 +0000 (19:56 +0000)]
ALSA: cmipci: Restore aux vol on suspend/resume
commit
c14231cc04337c2c2a937db084af342ce704dbde upstream.
Save and restore CM_REG_AUX_VOL instead of register 0x24 twice on
suspend/resume.
Tested on CMI8738LX.
Fixes:
cb60e5f5b2b1 ("[ALSA] cmipci - Add PM support")
Signed-off-by: Jonathan Teh <jonathan.teh@outlook.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/DBAPR04MB7366CB3EA9C8521C35C56E8B920E9@DBAPR04MB7366.eurprd04.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lars-Peter Clausen [Fri, 11 Mar 2022 20:14:00 +0000 (21:14 +0100)]
ALSA: usb-audio: Add mute TLV for playback volumes on RODE NT-USB
commit
0f306cca42fe879694fb5e2382748c43dc9e0196 upstream.
For the RODE NT-USB the lowest Playback mixer volume setting mutes the
audio output. But it is not reported as such causing e.g. PulseAudio to
accidentally mute the device when selecting a low volume.
Fix this by applying the existing quirk for this kind of issue when the
device is detected.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220311201400.235892-1-lars@metafoo.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 22 Mar 2022 17:13:25 +0000 (18:13 +0100)]
ALSA: pcm: Add stream lock during PCM reset ioctl operations
commit
1f68915b2efd0d6bfd6e124aa63c94b3c69f127c upstream.
snd_pcm_reset() is a non-atomic operation, and it's allowed to run
during the PCM stream running. It implies that the manipulation of
hw_ptr and other parameters might be racy.
This patch adds the PCM stream lock at appropriate places in
snd_pcm_*_reset() actions for covering that.
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322171325.4355-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 22 Mar 2022 17:07:20 +0000 (18:07 +0100)]
ALSA: pcm: Fix races among concurrent prealloc proc writes
commit
69534c48ba8ce552ce383b3dfdb271ffe51820c3 upstream.
We have no protection against concurrent PCM buffer preallocation
changes via proc files, and it may potentially lead to UAF or some
weird problem. This patch applies the PCM open_mutex to the proc
write operation for avoiding the racy proc writes and the PCM stream
open (and further operations).
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322170720.3529-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 22 Mar 2022 17:07:19 +0000 (18:07 +0100)]
ALSA: pcm: Fix races among concurrent prepare and hw_params/hw_free calls
commit
3c3201f8c7bb77eb53b08a3ca8d9a4ddc500b4c0 upstream.
Like the previous fixes to hw_params and hw_free ioctl races, we need
to paper over the concurrent prepare ioctl calls against hw_params and
hw_free, too.
This patch implements the locking with the existing
runtime->buffer_mutex for prepare ioctls. Unlike the previous case
for snd_pcm_hw_hw_params() and snd_pcm_hw_free(), snd_pcm_prepare() is
performed to the linked streams, hence the lock can't be applied
simply on the top. For tracking the lock in each linked substream, we
modify snd_pcm_action_group() slightly and apply the buffer_mutex for
the case stream_lock=false (formerly there was no lock applied)
there.
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322170720.3529-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 22 Mar 2022 17:07:18 +0000 (18:07 +0100)]
ALSA: pcm: Fix races among concurrent read/write and buffer changes
commit
dca947d4d26dbf925a64a6cfb2ddbc035e831a3d upstream.
In the current PCM design, the read/write syscalls (as well as the
equivalent ioctls) are allowed before the PCM stream is running, that
is, at PCM PREPARED state. Meanwhile, we also allow to re-issue
hw_params and hw_free ioctl calls at the PREPARED state that may
change or free the buffers, too. The problem is that there is no
protection against those mix-ups.
This patch applies the previously introduced runtime->buffer_mutex to
the read/write operations so that the concurrent hw_params or hw_free
call can no longer interfere during the operation. The mutex is
unlocked before scheduling, so we don't take it too long.
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322170720.3529-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 22 Mar 2022 17:07:17 +0000 (18:07 +0100)]
ALSA: pcm: Fix races among concurrent hw_params and hw_free calls
commit
92ee3c60ec9fe64404dc035e7c41277d74aa26cb upstream.
Currently we have neither proper check nor protection against the
concurrent calls of PCM hw_params and hw_free ioctls, which may result
in a UAF. Since the existing PCM stream lock can't be used for
protecting the whole ioctl operations, we need a new mutex to protect
those racy calls.
This patch introduced a new mutex, runtime->buffer_mutex, and applies
it to both hw_params and hw_free ioctl code paths. Along with it, the
both functions are slightly modified (the mmap_count check is moved
into the state-check block) for code simplicity.
Reported-by: Hu Jiahui <kirin.say@gmail.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322170720.3529-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Zheng [Sun, 13 Mar 2022 09:22:16 +0000 (04:22 -0500)]
ALSA: hda/realtek: Add quirk for ASUS GA402
commit
b7557267c233b55d8e8d7ba4c68cf944fe2ec02c upstream.
ASUS GA402 requires a workaround to manage the routing of its 4 speakers
like the other ASUS models. Add a corresponding quirk entry to fix it.
Signed-off-by: Jason Zheng <jasonzheng2004@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220313092216.29858-1-jasonzheng2004@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
huangwenhui [Fri, 11 Mar 2022 09:38:36 +0000 (17:38 +0800)]
ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671
commit
882bd07f564f97fca6e42ce6ce627ce24ce1ef5a upstream.
On a HP 288 Pro G8, the front mic could not be detected.In order to
get it working, the pin configuration needs to be set correctly, and
the ALC671_FIXUP_HP_HEADSET_MIC2 fixup needs to be applied.
Signed-off-by: huangwenhui <huangwenhuia@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220311093836.20754-1-huangwenhuia@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Crawford [Mon, 7 Mar 2022 19:32:29 +0000 (12:32 -0700)]
ALSA: hda/realtek: Add quirk for Clevo NP50PNJ
commit
9cb727506704b5323998047789fc871e64a6aa14 upstream.
Fixes headset detection on Clevo NP50PNJ.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220307193229.5141-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Crawford [Fri, 4 Mar 2022 17:08:40 +0000 (10:08 -0700)]
ALSA: hda/realtek: Add quirk for Clevo NP70PNJ
commit
0c20fce13e6e111463e3a15ce3cf6713fe518388 upstream.
Fixes headset detection on Clevo NP70PNJ.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220304170840.3351-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reza Jahanbakhshi [Fri, 4 Mar 2022 21:23:02 +0000 (22:23 +0100)]
ALSA: usb-audio: add mapping for new Corsair Virtuoso SE
commit
cd94df1795418056a19ff4cb44eadfc18ac99a57 upstream.
New device id for Corsair Virtuoso SE RGB Wireless that currently is not
in the mixer_map. This entry in the mixer_map is necessary in order to
label its mixer appropriately and allow userspace to pick the correct
volume controls. For instance, my own Corsair Virtuoso SE RGB Wireless
headset has this new ID and consequently, the sidetone and volume are not
working correctly without this change.
> sudo lsusb -v | grep -i corsair
Bus 007 Device 011: ID 1b1c:0a40 Corsair CORSAIR VIRTUOSO SE Wireless Gam
idVendor 0x1b1c Corsair
iManufacturer 1 Corsair
iProduct 2 CORSAIR VIRTUOSO SE Wireless Gaming Headset
Signed-off-by: Reza Jahanbakhshi <reza.jahanbakhshi@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220304212303.195949-1-reza.jahanbakhshi@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Fri, 18 Mar 2022 08:20:36 +0000 (09:20 +0100)]
ALSA: oss: Fix PCM OSS buffer allocation overflow
commit
efb6402c3c4a7c26d97c92d70186424097b6e366 upstream.
We've got syzbot reports hitting INT_MAX overflow at vmalloc()
allocation that is called from snd_pcm_plug_alloc(). Although we
apply the restrictions to input parameters, it's based only on the
hw_params of the underlying PCM device. Since the PCM OSS layer
allocates a temporary buffer for the data conversion, the size may
become unexpectedly large when more channels or higher rates is given;
in the reported case, it went over INT_MAX, hence it hits WARN_ON().
This patch is an attempt to avoid such an overflow and an allocation
for too large buffers. First off, it adds the limit of 1MB as the
upper bound for period bytes. This must be large enough for all use
cases, and we really don't want to handle a larger temporary buffer
than this size. The size check is performed at two places, where the
original period bytes is calculated and where the plugin buffer size
is calculated.
In addition, the driver uses array_size() and array3_size() for
multiplications to catch overflows for the converted period size and
buffer bytes.
Reported-by: syzbot+72732c532ac1454eeee9@syzkaller.appspotmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/00000000000085b1b305da5a66f3@google.com
Link: https://lore.kernel.org/r/20220318082036.29699-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 15 Mar 2022 16:41:58 +0000 (17:41 +0100)]
ASoC: sti: Fix deadlock via snd_pcm_stop_xrun() call
commit
455c5653f50e10b4f460ef24e99f0044fbe3401c upstream.
This is essentially a revert of the commit
dc865fb9e7c2 ("ASoC: sti:
Use snd_pcm_stop_xrun() helper"), which converted the manual
snd_pcm_stop() calls with snd_pcm_stop_xrun().
The commit above introduced a deadlock as snd_pcm_stop_xrun() itself
takes the PCM stream lock while the caller already holds it. Since
the conversion was done only for consistency reason and the open-call
with snd_pcm_stop() to the XRUN state is a correct usage, let's revert
the commit back as the fix.
Fixes:
dc865fb9e7c2 ("ASoC: sti: Use snd_pcm_stop_xrun() helper")
Reported-by: Daniel Palmer <daniel@0x0f.com>
Cc: Arnaud POULIQUEN <arnaud.pouliquen@st.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220315091319.3351522-1-daniel@0x0f.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20220315164158.19804-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Wed, 23 Mar 2022 00:41:47 +0000 (17:41 -0700)]
llc: fix netdevice reference leaks in llc_ui_bind()
commit
764f4eb6846f5475f1244767d24d25dd86528a4a upstream.
Whenever llc_ui_bind() and/or llc_ui_autobind()
took a reference on a netdevice but subsequently fail,
they must properly release their reference
or risk the infamous message from unregister_netdevice()
at device dismantle.
unregister_netdevice: waiting for eth0 to become free. Usage count = 3
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: 赵子轩 <beraphin@gmail.com>
Reported-by: Stoyan Manolov <smanolov@suse.de>
Link: https://lore.kernel.org/r/20220323004147.1990845-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helmut Grohne [Sat, 26 Feb 2022 15:22:56 +0000 (16:22 +0100)]
Bluetooth: btusb: Add another Realtek 8761BU
commit
6dfbe29f45fb0bde29213dbd754a79e8bfc6ecef upstream.
This device is sometimes wrapped with a label "EDUP".
T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#=107 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2550 ProdID=8761 Rev= 2.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=
00E04C239987
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Helmut Grohne <helmut@subdivi.de>
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1955351
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tadeusz Struk [Sun, 16 Jan 2022 01:26:26 +0000 (17:26 -0800)]
tpm: Fix error handling in async work
commit
2e8e4c8f6673247e22efc7985ce5497accd16f88 upstream.
When an invalid (non existing) handle is used in a TPM command,
that uses the resource manager interface (/dev/tpmrm0) the resource
manager tries to load it from its internal cache, but fails and
the tpm_dev_transmit returns an -EINVAL error to the caller.
The existing async handler doesn't handle these error cases
currently and the condition in the poll handler never returns
mask with EPOLLIN set.
The result is that the poll call blocks and the application gets stuck
until the user_read_timer wakes it up after 120 sec.
Change the tpm_dev_async_work function to handle error conditions
returned from tpm_dev_transmit they are also reflected in the poll mask
and a correct error code could passed back to the caller.
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: <linux-integrity@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Fixes:
9e1b74a63f77 ("tpm: add support for nonblocking operation")
Tested-by: Jarkko Sakkinen<jarkko@kernel.org>
Signed-off-by: Tadeusz Struk <tstruk@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tadeusz Struk [Thu, 10 Mar 2022 23:25:38 +0000 (15:25 -0800)]
net: ipv6: fix skb_over_panic in __ip6_append_data
commit
5e34af4142ffe68f01c8a9acae83300f8911e20c upstream.
Syzbot found a kernel bug in the ipv6 stack:
LINK: https://syzkaller.appspot.com/bug?id=205d6f11d72329ab8d62a610c44c5e7e25415580
The reproducer triggers it by sending a crafted message via sendmmsg()
call, which triggers skb_over_panic, and crashes the kernel:
skbuff: skb_over_panic: text:
ffffffff84647fb4 len:65575 put:65575
head:
ffff888109ff0000 data:
ffff888109ff0088 tail:0x100af end:0xfec0
dev:<NULL>
Update the check that prevents an invalid packet with MTU equal
to the fregment header size to eat up all the space for payload.
The reproducer can be found here:
LINK: https://syzkaller.appspot.com/text?tag=ReproC&x=1648c83fb00000
Reported-by: syzbot+e223cf47ec8ae183f2a0@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20220310232538.1044947-1-tadeusz.struk@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jordy Zomer [Tue, 11 Jan 2022 16:44:51 +0000 (17:44 +0100)]
nfc: st21nfca: Fix potential buffer overflows in EVT_TRANSACTION
commit
4fbcc1a4cb20fe26ad0225679c536c80f1648221 upstream.
It appears that there are some buffer overflows in EVT_TRANSACTION.
This happens because the length parameters that are passed to memcpy
come directly from skb->data and are not guarded in any way.
Signed-off-by: Jordy Zomer <jordy@pwning.systems>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Denis Efremov <denis.e.efremov@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 23 Mar 2022 08:16:44 +0000 (09:16 +0100)]
Linux 5.15.31
Link: https://lore.kernel.org/r/20220321133220.559554263@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Tue, 18 Jan 2022 13:39:34 +0000 (13:39 +0000)]
btrfs: skip reserved bytes warning on unmount after log cleanup failure
commit
40cdc509877bacb438213b83c7541c5e24a1d9ec upstream.
After the recent changes made by commit
c2e39305299f01 ("btrfs: clear
extent buffer uptodate when we fail to write it") and its followup fix,
commit
651740a5024117 ("btrfs: check WRITE_ERR when trying to read an
extent buffer"), we can now end up not cleaning up space reservations of
log tree extent buffers after a transaction abort happens, as well as not
cleaning up still dirty extent buffers.
This happens because if writeback for a log tree extent buffer failed,
then we have cleared the bit EXTENT_BUFFER_UPTODATE from the extent buffer
and we have also set the bit EXTENT_BUFFER_WRITE_ERR on it. Later on,
when trying to free the log tree with free_log_tree(), which iterates
over the tree, we can end up getting an -EIO error when trying to read
a node or a leaf, since read_extent_buffer_pages() returns -EIO if an
extent buffer does not have EXTENT_BUFFER_UPTODATE set and has the
EXTENT_BUFFER_WRITE_ERR bit set. Getting that -EIO means that we return
immediately as we can not iterate over the entire tree.
In that case we never update the reserved space for an extent buffer in
the respective block group and space_info object.
When this happens we get the following traces when unmounting the fs:
[174957.284509] BTRFS: error (device dm-0) in cleanup_transaction:1913: errno=-5 IO failure
[174957.286497] BTRFS: error (device dm-0) in free_log_tree:3420: errno=-5 IO failure
[174957.399379] ------------[ cut here ]------------
[174957.402497] WARNING: CPU: 2 PID: 3206883 at fs/btrfs/block-group.c:127 btrfs_put_block_group+0x77/0xb0 [btrfs]
[174957.407523] Modules linked in: btrfs overlay dm_zero (...)
[174957.424917] CPU: 2 PID: 3206883 Comm: umount Tainted: G W 5.16.0-rc5-btrfs-next-109 #1
[174957.426689] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[174957.428716] RIP: 0010:btrfs_put_block_group+0x77/0xb0 [btrfs]
[174957.429717] Code: 21 48 8b bd (...)
[174957.432867] RSP: 0018:
ffffb70d41cffdd0 EFLAGS:
00010206
[174957.433632] RAX:
0000000000000001 RBX:
ffff8b09c3848000 RCX:
ffff8b0758edd1c8
[174957.434689] RDX:
0000000000000001 RSI:
ffffffffc0b467e7 RDI:
ffff8b0758edd000
[174957.436068] RBP:
ffff8b0758edd000 R08:
0000000000000000 R09:
0000000000000000
[174957.437114] R10:
0000000000000246 R11:
0000000000000000 R12:
ffff8b09c3848148
[174957.438140] R13:
ffff8b09c3848198 R14:
ffff8b0758edd188 R15:
dead000000000100
[174957.439317] FS:
00007f328fb82800(0000) GS:
ffff8b0a2d200000(0000) knlGS:
0000000000000000
[174957.440402] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[174957.441164] CR2:
00007fff13563e98 CR3:
0000000404f4e005 CR4:
0000000000370ee0
[174957.442117] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[174957.443076] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[174957.443948] Call Trace:
[174957.444264] <TASK>
[174957.444538] btrfs_free_block_groups+0x255/0x3c0 [btrfs]
[174957.445238] close_ctree+0x301/0x357 [btrfs]
[174957.445803] ? call_rcu+0x16c/0x290
[174957.446250] generic_shutdown_super+0x74/0x120
[174957.446832] kill_anon_super+0x14/0x30
[174957.447305] btrfs_kill_super+0x12/0x20 [btrfs]
[174957.447890] deactivate_locked_super+0x31/0xa0
[174957.448440] cleanup_mnt+0x147/0x1c0
[174957.448888] task_work_run+0x5c/0xa0
[174957.449336] exit_to_user_mode_prepare+0x1e5/0x1f0
[174957.449934] syscall_exit_to_user_mode+0x16/0x40
[174957.450512] do_syscall_64+0x48/0xc0
[174957.450980] entry_SYSCALL_64_after_hwframe+0x44/0xae
[174957.451605] RIP: 0033:0x7f328fdc4a97
[174957.452059] Code: 03 0c 00 f7 (...)
[174957.454320] RSP: 002b:
00007fff13564ec8 EFLAGS:
00000246 ORIG_RAX:
00000000000000a6
[174957.455262] RAX:
0000000000000000 RBX:
00007f328feea264 RCX:
00007f328fdc4a97
[174957.456131] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000560b8ae51dd0
[174957.457118] RBP:
0000560b8ae51ba0 R08:
0000000000000000 R09:
00007fff13563c40
[174957.458005] R10:
00007f328fe49fc0 R11:
0000000000000246 R12:
0000000000000000
[174957.459113] R13:
0000560b8ae51dd0 R14:
0000560b8ae51cb0 R15:
0000000000000000
[174957.460193] </TASK>
[174957.460534] irq event stamp: 0
[174957.461003] hardirqs last enabled at (0): [<
0000000000000000>] 0x0
[174957.461947] hardirqs last disabled at (0): [<
ffffffffb0e94214>] copy_process+0x934/0x2040
[174957.463147] softirqs last enabled at (0): [<
ffffffffb0e94214>] copy_process+0x934/0x2040
[174957.465116] softirqs last disabled at (0): [<
0000000000000000>] 0x0
[174957.466323] ---[ end trace
bc7ee0c490bce3af ]---
[174957.467282] ------------[ cut here ]------------
[174957.468184] WARNING: CPU: 2 PID: 3206883 at fs/btrfs/block-group.c:3976 btrfs_free_block_groups+0x330/0x3c0 [btrfs]
[174957.470066] Modules linked in: btrfs overlay dm_zero (...)
[174957.483137] CPU: 2 PID: 3206883 Comm: umount Tainted: G W 5.16.0-rc5-btrfs-next-109 #1
[174957.484691] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[174957.486853] RIP: 0010:btrfs_free_block_groups+0x330/0x3c0 [btrfs]
[174957.488050] Code: 00 00 00 ad de (...)
[174957.491479] RSP: 0018:
ffffb70d41cffde0 EFLAGS:
00010206
[174957.492520] RAX:
ffff8b08d79310b0 RBX:
ffff8b09c3848000 RCX:
0000000000000000
[174957.493868] RDX:
0000000000000001 RSI:
fffff443055ee600 RDI:
ffffffffb1131846
[174957.495183] RBP:
ffff8b08d79310b0 R08:
0000000000000000 R09:
0000000000000000
[174957.496580] R10:
0000000000000001 R11:
0000000000000000 R12:
ffff8b08d7931000
[174957.498027] R13:
ffff8b09c38492b0 R14:
dead000000000122 R15:
dead000000000100
[174957.499438] FS:
00007f328fb82800(0000) GS:
ffff8b0a2d200000(0000) knlGS:
0000000000000000
[174957.500990] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[174957.502117] CR2:
00007fff13563e98 CR3:
0000000404f4e005 CR4:
0000000000370ee0
[174957.503513] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[174957.504864] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[174957.506167] Call Trace:
[174957.506654] <TASK>
[174957.507047] close_ctree+0x301/0x357 [btrfs]
[174957.507867] ? call_rcu+0x16c/0x290
[174957.508567] generic_shutdown_super+0x74/0x120
[174957.509447] kill_anon_super+0x14/0x30
[174957.510194] btrfs_kill_super+0x12/0x20 [btrfs]
[174957.511123] deactivate_locked_super+0x31/0xa0
[174957.511976] cleanup_mnt+0x147/0x1c0
[174957.512610] task_work_run+0x5c/0xa0
[174957.513309] exit_to_user_mode_prepare+0x1e5/0x1f0
[174957.514231] syscall_exit_to_user_mode+0x16/0x40
[174957.515069] do_syscall_64+0x48/0xc0
[174957.515718] entry_SYSCALL_64_after_hwframe+0x44/0xae
[174957.516688] RIP: 0033:0x7f328fdc4a97
[174957.517413] Code: 03 0c 00 f7 d8 (...)
[174957.521052] RSP: 002b:
00007fff13564ec8 EFLAGS:
00000246 ORIG_RAX:
00000000000000a6
[174957.522514] RAX:
0000000000000000 RBX:
00007f328feea264 RCX:
00007f328fdc4a97
[174957.523950] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000560b8ae51dd0
[174957.525375] RBP:
0000560b8ae51ba0 R08:
0000000000000000 R09:
00007fff13563c40
[174957.526763] R10:
00007f328fe49fc0 R11:
0000000000000246 R12:
0000000000000000
[174957.528058] R13:
0000560b8ae51dd0 R14:
0000560b8ae51cb0 R15:
0000000000000000
[174957.529404] </TASK>
[174957.529843] irq event stamp: 0
[174957.530256] hardirqs last enabled at (0): [<
0000000000000000>] 0x0
[174957.531061] hardirqs last disabled at (0): [<
ffffffffb0e94214>] copy_process+0x934/0x2040
[174957.532075] softirqs last enabled at (0): [<
ffffffffb0e94214>] copy_process+0x934/0x2040
[174957.533083] softirqs last disabled at (0): [<
0000000000000000>] 0x0
[174957.533865] ---[ end trace
bc7ee0c490bce3b0 ]---
[174957.534452] BTRFS info (device dm-0): space_info 4 has
1070841856 free, is not full
[174957.535404] BTRFS info (device dm-0): space_info total=
1073741824, used=2785280, pinned=0, reserved=49152, may_use=0, readonly=65536 zone_unusable=0
[174957.537029] BTRFS info (device dm-0): global_block_rsv: size 0 reserved 0
[174957.537859] BTRFS info (device dm-0): trans_block_rsv: size 0 reserved 0
[174957.538697] BTRFS info (device dm-0): chunk_block_rsv: size 0 reserved 0
[174957.539552] BTRFS info (device dm-0): delayed_block_rsv: size 0 reserved 0
[174957.540403] BTRFS info (device dm-0): delayed_refs_rsv: size 0 reserved 0
This also means that in case we have log tree extent buffers that are
still dirty, we can end up not cleaning them up in case we find an
extent buffer with EXTENT_BUFFER_WRITE_ERR set on it, as in that case
we have no way for iterating over the rest of the tree.
This issue is very often triggered with test cases generic/475 and
generic/648 from fstests.
The issue could almost be fixed by iterating over the io tree attached to
each log root which keeps tracks of the range of allocated extent buffers,
log_root->dirty_log_pages, however that does not work and has some
inconveniences:
1) After we sync the log, we clear the range of the extent buffers from
the io tree, so we can't find them after writeback. We could keep the
ranges in the io tree, with a separate bit to signal they represent
extent buffers already written, but that means we need to hold into
more memory until the transaction commits.
How much more memory is used depends a lot on whether we are able to
allocate contiguous extent buffers on disk (and how often) for a log
tree - if we are able to, then a single extent state record can
represent multiple extent buffers, otherwise we need multiple extent
state record structures to track each extent buffer.
In fact, my earlier approach did that:
https://lore.kernel.org/linux-btrfs/
3aae7c6728257c7ce2279d6660ee2797e5e34bbd.
1641300250.git.fdmanana@suse.com/
However that can cause a very significant negative impact on
performance, not only due to the extra memory usage but also because
we get a larger and deeper dirty_log_pages io tree.
We got a report that, on beefy machines at least, we can get such
performance drop with fsmark for example:
https://lore.kernel.org/linux-btrfs/
20220117082426.GE32491@xsang-OptiPlex-9020/
2) We would be doing it only to deal with an unexpected and exceptional
case, which is basically failure to read an extent buffer from disk
due to IO failures. On a healthy system we don't expect transaction
aborts to happen after all;
3) Instead of relying on iterating the log tree or tracking the ranges
of extent buffers in the dirty_log_pages io tree, using the radix
tree that tracks extent buffers (fs_info->buffer_radix) to find all
log tree extent buffers is not reliable either, because after writeback
of an extent buffer it can be evicted from memory by the release page
callback of the btree inode (btree_releasepage()).
Since there's no way to be able to properly cleanup a log tree without
being able to read its extent buffers from disk and without using more
memory to track the logical ranges of the allocated extent buffers do
the following:
1) When we fail to cleanup a log tree, setup a flag that indicates that
failure;
2) Trigger writeback of all log tree extent buffers that are still dirty,
and wait for the writeback to complete. This is just to cleanup their
state, page states, page leaks, etc;
3) When unmounting the fs, ignore if the number of bytes reserved in a
block group and in a space_info is not 0 if, and only if, we failed to
cleanup a log tree. Also ignore only for metadata block groups and the
metadata space_info object.
This is far from a perfect solution, but it serves to silence test
failures such as those from generic/475 and generic/648. However having
a non-zero value for the reserved bytes counters on unmount after a
transaction abort, is not such a terrible thing and it's completely
harmless, it does not affect the filesystem integrity in any way.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Petlan [Thu, 17 Mar 2022 13:55:36 +0000 (14:55 +0100)]
perf symbols: Fix symbol size calculation condition
commit
3cf6a32f3f2a45944dd5be5c6ac4deb46bcd3bee upstream.
Before this patch, the symbol end address fixup to be called, needed two
conditions being met:
if (prev->end == prev->start && prev->end != curr->start)
Where
"prev->end == prev->start" means that prev is zero-long
(and thus needs a fixup)
and
"prev->end != curr->start" means that fixup hasn't been applied yet
However, this logic is incorrect in the following situation:
*curr = {rb_node = {__rb_parent_color =
278218928,
rb_right = 0x0, rb_left = 0x0},
start = 0xc000000000062354,
end = 0xc000000000062354, namelen = 40, type = 2 '\002',
binding = 0 '\000', idle = 0 '\000', ignore = 0 '\000',
inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
name = 0x1159739e "kprobe_optinsn_page\t[__builtin__kprobes]"}
*prev = {rb_node = {__rb_parent_color =
278219041,
rb_right = 0x109548b0, rb_left = 0x109547c0},
start = 0xc000000000062354,
end = 0xc000000000062354, namelen = 12, type = 2 '\002',
binding = 1 '\001', idle = 0 '\000', ignore = 0 '\000',
inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
name = 0x1095486e "optinsn_slot"}
In this case, prev->start == prev->end == curr->start == curr->end,
thus the condition above thinks that "we need a fixup due to zero
length of prev symbol, but it has been probably done, since the
prev->end == curr->start", which is wrong.
After the patch, the execution path proceeds to arch__symbols__fixup_end
function which fixes up the size of prev symbol by adding page_size to
its end offset.
Fixes:
3b01a413c196c910 ("perf symbols: Improve kallsyms symbol end addr calculation")
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20220317135536.805-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Skripkin [Mon, 14 Mar 2022 05:56:32 +0000 (22:56 -0700)]
Input: aiptek - properly check endpoint type
commit
5600f6986628dde8881734090588474f54a540a8 upstream.
Syzbot reported warning in usb_submit_urb() which is caused by wrong
endpoint type. There was a check for the number of endpoints, but not
for the type of endpoint.
Fix it by replacing old desc.bNumEndpoints check with
usb_find_common_endpoints() helper for finding endpoints
Fail log:
usb 5-1: BOGUS urb xfer, pipe 1 != type 3
WARNING: CPU: 2 PID: 48 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
Modules linked in:
CPU: 2 PID: 48 Comm: kworker/2:2 Not tainted 5.17.0-rc6-syzkaller-00226-g07ebd38a0da2 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Workqueue: usb_hub_wq hub_event
...
Call Trace:
<TASK>
aiptek_open+0xd5/0x130 drivers/input/tablet/aiptek.c:830
input_open_device+0x1bb/0x320 drivers/input/input.c:629
kbd_connect+0xfe/0x160 drivers/tty/vt/keyboard.c:1593
Fixes:
8e20cf2bce12 ("Input: aiptek - fix crash on detecting device without endpoints")
Reported-and-tested-by: syzbot+75cccf2b7da87fb6f84b@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20220308194328.26220-1-paskripkin@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt Lupfer [Tue, 8 Mar 2022 15:27:02 +0000 (15:27 +0000)]
scsi: mpt3sas: Page fault in reply q processing
commit
69ad4ef868c1fc7609daa235dfa46d28ba7a3ba3 upstream.
A page fault was encountered in mpt3sas on a LUN reset error path:
[ 145.763216] mpt3sas_cm1: Task abort tm failed: handle(0x0002),timeout(30) tr_method(0x0) smid(3) msix_index(0)
[ 145.778932] scsi 1:0:0:0: task abort: FAILED scmd(0x0000000024ba29a2)
[ 145.817307] scsi 1:0:0:0: attempting device reset! scmd(0x0000000024ba29a2)
[ 145.827253] scsi 1:0:0:0: [sg1] tag#2 CDB: Receive Diagnostic 1c 01 01 ff fc 00
[ 145.837617] scsi target1:0:0: handle(0x0002), sas_address(0x500605b0000272b9), phy(0)
[ 145.848598] scsi target1:0:0: enclosure logical id(0x500605b0000272b8), slot(0)
[ 149.858378] mpt3sas_cm1: Poll ReplyDescriptor queues for completion of smid(0), task_type(0x05), handle(0x0002)
[ 149.875202] BUG: unable to handle page fault for address:
00000007fffc445d
[ 149.885617] #PF: supervisor read access in kernel mode
[ 149.894346] #PF: error_code(0x0000) - not-present page
[ 149.903123] PGD 0 P4D 0
[ 149.909387] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 149.917417] CPU: 24 PID: 3512 Comm: scsi_eh_1 Kdump: loaded Tainted: G S O 5.10.89-altav-1 #1
[ 149.934327] Hardware name: DDN 200NVX2 /200NVX2-MB , BIOS ATHG2.2.02.01 09/10/2021
[ 149.951871] RIP: 0010:_base_process_reply_queue+0x4b/0x900 [mpt3sas]
[ 149.961889] Code: 0f 84 22 02 00 00 8d 48 01 49 89 fd 48 8d 57 38 f0 0f b1 4f 38 0f 85 d8 01 00 00 49 8b 45 10 45 31 e4 41 8b 55 0c 48 8d 1c d0 <0f> b6 03 83 e0 0f 3c 0f 0f 85 a2 00 00 00 e9 e6 01 00 00 0f b7 ee
[ 149.991952] RSP: 0018:
ffffc9000f1ebcb8 EFLAGS:
00010246
[ 150.000937] RAX:
0000000000000055 RBX:
00000007fffc445d RCX:
000000002548f071
[ 150.011841] RDX:
00000000ffff8881 RSI:
0000000000000001 RDI:
ffff888125ed50d8
[ 150.022670] RBP:
0000000000000000 R08:
0000000000000000 R09:
c0000000ffff7fff
[ 150.033445] R10:
ffffc9000f1ebb68 R11:
ffffc9000f1ebb60 R12:
0000000000000000
[ 150.044204] R13:
ffff888125ed50d8 R14:
0000000000000080 R15:
34cdc00034cdea80
[ 150.054963] FS:
0000000000000000(0000) GS:
ffff88dfaf200000(0000) knlGS:
0000000000000000
[ 150.066715] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 150.076078] CR2:
00000007fffc445d CR3:
000000012448a006 CR4:
0000000000770ee0
[ 150.086887] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 150.097670] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 150.108323] PKRU:
55555554
[ 150.114690] Call Trace:
[ 150.120497] ? printk+0x48/0x4a
[ 150.127049] mpt3sas_scsih_issue_tm.cold.114+0x2e/0x2b3 [mpt3sas]
[ 150.136453] mpt3sas_scsih_issue_locked_tm+0x86/0xb0 [mpt3sas]
[ 150.145759] scsih_dev_reset+0xea/0x300 [mpt3sas]
[ 150.153891] scsi_eh_ready_devs+0x541/0x9e0 [scsi_mod]
[ 150.162206] ? __scsi_host_match+0x20/0x20 [scsi_mod]
[ 150.170406] ? scsi_try_target_reset+0x90/0x90 [scsi_mod]
[ 150.178925] ? blk_mq_tagset_busy_iter+0x45/0x60
[ 150.186638] ? scsi_try_target_reset+0x90/0x90 [scsi_mod]
[ 150.195087] scsi_error_handler+0x3a5/0x4a0 [scsi_mod]
[ 150.203206] ? __schedule+0x1e9/0x610
[ 150.209783] ? scsi_eh_get_sense+0x210/0x210 [scsi_mod]
[ 150.217924] kthread+0x12e/0x150
[ 150.224041] ? kthread_worker_fn+0x130/0x130
[ 150.231206] ret_from_fork+0x1f/0x30
This is caused by mpt3sas_base_sync_reply_irqs() using an invalid reply_q
pointer outside of the list_for_each_entry() loop. At the end of the full
list traversal the pointer is invalid.
Move the _base_process_reply_queue() call inside of the loop.
Link: https://lore.kernel.org/r/d625deae-a958-0ace-2ba3-0888dd0a415b@ddn.com
Fixes:
711a923c14d9 ("scsi: mpt3sas: Postprocessing of target and LUN reset")
Cc: stable@vger.kernel.org
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Matt Lupfer <mlupfer@ddn.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Stern [Thu, 3 Mar 2022 21:00:17 +0000 (16:00 -0500)]
usb: usbtmc: Fix bug in pipe direction for control transfers
commit
e9b667a82cdcfe21d590344447d65daed52b353b upstream.
The syzbot fuzzer reported a minor bug in the usbtmc driver:
usb 5-1: BOGUS control dir, pipe
80001e80 doesn't match bRequestType 0
WARNING: CPU: 0 PID: 3813 at drivers/usb/core/urb.c:412
usb_submit_urb+0x13a5/0x1970 drivers/usb/core/urb.c:410
Modules linked in:
CPU: 0 PID: 3813 Comm: syz-executor122 Not tainted
5.17.0-rc5-syzkaller-00306-g2293be58d6a1 #0
...
Call Trace:
<TASK>
usb_start_wait_urb+0x113/0x530 drivers/usb/core/message.c:58
usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
usb_control_msg+0x2a5/0x4b0 drivers/usb/core/message.c:153
usbtmc_ioctl_request drivers/usb/class/usbtmc.c:1947 [inline]
The problem is that usbtmc_ioctl_request() uses usb_rcvctrlpipe() for
all of its transfers, whether they are in or out. It's easy to fix.
CC: <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+a48e3d1a875240cab5de@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YiEsYTPEE6lOCOA5@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Stern [Sun, 6 Mar 2022 02:47:22 +0000 (21:47 -0500)]
usb: gadget: Fix use-after-free bug by not setting udc->dev.driver
commit
16b1941eac2bd499f065a6739a40ce0011a3d740 upstream.
The syzbot fuzzer found a use-after-free bug:
BUG: KASAN: use-after-free in dev_uevent+0x712/0x780 drivers/base/core.c:2320
Read of size 8 at addr
ffff88802b934098 by task udevd/3689
CPU: 2 PID: 3689 Comm: udevd Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742eb2b #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255
__kasan_report mm/kasan/report.c:442 [inline]
kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
dev_uevent+0x712/0x780 drivers/base/core.c:2320
uevent_show+0x1b8/0x380 drivers/base/core.c:2391
dev_attr_show+0x4b/0x90 drivers/base/core.c:2094
Although the bug manifested in the driver core, the real cause was a
race with the gadget core. dev_uevent() does:
if (dev->driver)
add_uevent_var(env, "DRIVER=%s", dev->driver->name);
and between the test and the dereference of dev->driver, the gadget
core sets dev->driver to NULL.
The race wouldn't occur if the gadget core registered its devices on
a real bus, using the standard synchronization techniques of the
driver core. However, it's not necessary to make such a large change
in order to fix this bug; all we need to do is make sure that
udc->dev.driver is always NULL.
In fact, there is no reason for udc->dev.driver ever to be set to
anything, let alone to the value it currently gets: the address of the
gadget's driver. After all, a gadget driver only knows how to manage
a gadget, not how to manage a UDC.
This patch simply removes the statements in the gadget core that touch
udc->dev.driver.
Fixes:
2ccea03a8f7e ("usb: gadget: introduce UDC Class")
CC: <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+348b571beb5eeb70a582@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YiQgukfFFbBnwJ/9@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 1 Mar 2022 08:04:24 +0000 (11:04 +0300)]
usb: gadget: rndis: prevent integer overflow in rndis_set_response()
commit
65f3324f4b6fed78b8761c3b74615ecf0ffa81fa upstream.
If "BufOffset" is very large the "BufOffset + 8" operation can have an
integer overflow.
Cc: stable@kernel.org
Fixes:
38ea1eac7d88 ("usb: gadget: rndis: check size of RNDIS_MSG_SET command")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220301080424.GA17208@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 16 Mar 2022 18:38:18 +0000 (19:38 +0100)]
arm64: fix clang warning about TRAMP_VALIAS
[ Upstream commit
7f34b43e07cb512b28543fdcb9f35d1fbfda9ebc ]
The newly introduced TRAMP_VALIAS definition causes a build warning
with clang-14:
arch/arm64/include/asm/vectors.h:66:31: error: arithmetic on a null pointer treated as a cast from integer to pointer is a GNU extension [-Werror,-Wnull-pointer-arithmetic]
return (char *)TRAMP_VALIAS + SZ_2K * slot;
Change the addition to something clang does not complain about.
Fixes:
bd09128d16fa ("arm64: Add percpu vectors for EL1")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220316183833.1563139-1-arnd@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ivan Vecera [Thu, 17 Mar 2022 10:45:24 +0000 (11:45 +0100)]
iavf: Fix hang during reboot/shutdown
[ Upstream commit
b04683ff8f0823b869c219c78ba0d974bddea0b5 ]
Recent commit
974578017fc1 ("iavf: Add waiting so the port is
initialized in remove") adds a wait-loop at the beginning of
iavf_remove() to ensure that port initialization is finished
prior unregistering net device. This causes a regression
in reboot/shutdown scenario because in this case callback
iavf_shutdown() is called and this callback detaches the device,
makes it down if it is running and sets its state to __IAVF_REMOVE.
Later shutdown callback of associated PF driver (e.g. ice_shutdown)
is called. That callback calls among other things sriov_disable()
that calls indirectly iavf_remove() (see stack trace below).
As the adapter state is already __IAVF_REMOVE then the mentioned
loop is end-less and shutdown process hangs.
The patch fixes this by checking adapter's state at the beginning
of iavf_remove() and skips the rest of the function if the adapter
is already in remove state (shutdown is in progress).
Reproducer:
1. Create VF on PF driven by ice or i40e driver
2. Ensure that the VF is bound to iavf driver
3. Reboot
[52625.981294] sysrq: SysRq : Show Blocked State
[52625.988377] task:reboot state:D stack: 0 pid:17359 ppid: 1 f2
[52625.996732] Call Trace:
[52625.999187] __schedule+0x2d1/0x830
[52626.007400] schedule+0x35/0xa0
[52626.010545] schedule_hrtimeout_range_clock+0x83/0x100
[52626.020046] usleep_range+0x5b/0x80
[52626.023540] iavf_remove+0x63/0x5b0 [iavf]
[52626.027645] pci_device_remove+0x3b/0xc0
[52626.031572] device_release_driver_internal+0x103/0x1f0
[52626.036805] pci_stop_bus_device+0x72/0xa0
[52626.040904] pci_stop_and_remove_bus_device+0xe/0x20
[52626.045870] pci_iov_remove_virtfn+0xba/0x120
[52626.050232] sriov_disable+0x2f/0xe0
[52626.053813] ice_free_vfs+0x7c/0x340 [ice]
[52626.057946] ice_remove+0x220/0x240 [ice]
[52626.061967] ice_shutdown+0x16/0x50 [ice]
[52626.065987] pci_device_shutdown+0x34/0x60
[52626.070086] device_shutdown+0x165/0x1c5
[52626.074011] kernel_restart+0xe/0x30
[52626.077593] __do_sys_reboot+0x1d2/0x210
[52626.093815] do_syscall_64+0x5b/0x1a0
[52626.097483] entry_SYSCALL_64_after_hwframe+0x65/0xca
Fixes:
974578017fc1 ("iavf: Add waiting so the port is initialized in remove")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://lore.kernel.org/r/20220317104524.2802848-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Oltean [Wed, 16 Mar 2022 19:21:17 +0000 (21:21 +0200)]
net: mscc: ocelot: fix backwards compatibility with single-chain tc-flower offload
[ Upstream commit
8e0341aefcc9133f3f48683873284b169581315b ]
ACL rules can be offloaded to VCAP IS2 either through chain 0, or, since
the blamed commit, through a chain index whose number encodes a specific
PAG (Policy Action Group) and lookup number.
The chain number is translated through ocelot_chain_to_pag() into a PAG,
and through ocelot_chain_to_lookup() into a lookup number.
The problem with the blamed commit is that the above 2 functions don't
have special treatment for chain 0. So ocelot_chain_to_pag(0) returns
filter->pag = 224, which is in fact -32, but the "pag" field is an u8.
So we end up programming the hardware with VCAP IS2 entries having a PAG
of 224. But the way in which the PAG works is that it defines a subset
of VCAP IS2 filters which should match on a packet. The default PAG is
0, and previous VCAP IS1 rules (which we offload using 'goto') can
modify it. So basically, we are installing filters with a PAG on which
no packet will ever match. This is the hardware equivalent of adding
filters to a chain which has no 'goto' to it.
Restore the previous functionality by making ACL filters offloaded to
chain 0 go to PAG 0 and lookup number 0. The choice of PAG is clearly
correct, but the choice of lookup number isn't "as before" (which was to
leave the lookup a "don't care"). However, lookup 0 should be fine,
since even though there are ACL actions (policers) which have a
requirement to be used in a specific lookup, that lookup is 0.
Fixes:
226e9cd82a96 ("net: mscc: ocelot: only install TCAM entries into a specific lookup and PAG")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220316192117.2568261-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Doug Berger [Thu, 17 Mar 2022 01:28:12 +0000 (18:28 -0700)]
net: bcmgenet: skip invalid partial checksums
[ Upstream commit
0f643c88c8d240eba0ea25c2e095a46515ff46e9 ]
The RXCHK block will return a partial checksum of 0 if it encounters
a problem while receiving a packet. Since a 1's complement sum can
only produce this result if no bits are set in the received data
stream it is fair to treat it as an invalid partial checksum and
not pass it up the stack.
Fixes:
810155397890 ("net: bcmgenet: use CHECKSUM_COMPLETE for NETIF_F_RXCSUM")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220317012812.1313196-1-opendmb@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>