Peter Meerwald-Stadler [Tue, 5 Jul 2016 11:55:37 +0000 (13:55 +0200)]
staging: iio: isl29018: Remove excessive output messages
Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald-Stadler [Tue, 5 Jul 2016 11:55:36 +0000 (13:55 +0200)]
staging: iio: isl29018: Prefix #defines
Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald-Stadler [Tue, 5 Jul 2016 10:23:21 +0000 (12:23 +0200)]
iio: light: vcnl4000: Add missing locking
Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald-Stadler [Tue, 5 Jul 2016 10:23:20 +0000 (12:23 +0200)]
iio: light: vcnl4000: Cleanup read_raw() returns
Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald-Stadler [Tue, 5 Jul 2016 10:23:19 +0000 (12:23 +0200)]
iio: light: vcnl4000: Use BIT() macro
Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Peter Meerwald-Stadler [Tue, 5 Jul 2016 10:23:18 +0000 (12:23 +0200)]
iio: light: vcnl4000: Mention and check support for VCNL4010 and VCNL4020
VCNL4000, VCNL4010 and VCNL4020 chips are fairly compatible from a software
point of view, added features are not yet supported by the driver
patch adds a check for the product ID and demotes the corresponding
dev_info() to dev_dbg()
Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Matt Ranostay [Tue, 5 Jul 2016 01:54:04 +0000 (18:54 -0700)]
iio: temperature: add support for Maxim thermocouple chips
Add initial driver support for MAX6675, and MAX31855 thermocouple chips.
Cc: Marek Vasut <marex@denx.de>
Cc: Matt Porter <mporter@konsulko.com>
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Bijosh Thykkoottathil [Mon, 4 Jul 2016 11:15:08 +0000 (11:15 +0000)]
drivers:iio:accel:mma8452: removed unwanted return statements
Removed unwanted return statements from the function
mma8452_set_freefall_mode.
Signed-off-by: Bijosh Thykkoottathil <bijosh.t@hotmail.com>
Acked-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Bijosh Thykkoottathil [Mon, 4 Jul 2016 10:08:53 +0000 (10:08 +0000)]
drivers:iio:accel:mma8452: added cleanup provision in case of failure.
mma8452_set_freefall_mode can return -ve value in case if
i2c_smbus_read_byte_data fails. This function is called from mma8452_probe,
and returning -ve value from probe indicates probe failure. Need to call
iio_triggered_buffer_cleanup & iio_trigger_cleanup in this case.
Signed-off-by: Bijosh Thykkoottathil <bijosh.t@hotmail.com>
Acked-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Jonathan Cameron [Sun, 3 Jul 2016 09:18:03 +0000 (10:18 +0100)]
iio: Add iio.git tree to MAINTAINERS
The tree has been in the same location for a long time. Putting it in
MAINTAINERS makes it easy for those new to, or less familiar with IIO
to find the correct tree to base patches on.
Mostly basing on staging-next is fine as well unless working on a very
active driver.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Gregor Boirie [Mon, 27 Jun 2016 10:38:58 +0000 (12:38 +0200)]
iio:st_pressure: clean useless static channel initializers
Some static channels are explicitly initialized with default values.
Remove them to enhance readability.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Gregor Boirie [Mon, 27 Jun 2016 10:38:57 +0000 (12:38 +0200)]
iio:st_pressure:lps22hb: temperature support
Implement lps22hb temperature sampling channel.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Gregor Boirie [Mon, 27 Jun 2016 10:38:56 +0000 (12:38 +0200)]
iio:st_pressure:lps22hb: open drain support
Add support for open drain interrupt line.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Gregor Boirie [Mon, 27 Jun 2016 10:38:55 +0000 (12:38 +0200)]
iio:st_pressure: temperature triggered buffering
Enable support for triggered buffering of temperature samples.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Gregor Boirie [Mon, 27 Jun 2016 10:38:54 +0000 (12:38 +0200)]
iio:st_pressure: document sampling gains
Details scaling factors and offsets applied to raw temperature and pressure
samples.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Gregor Boirie [Mon, 27 Jun 2016 10:38:53 +0000 (12:38 +0200)]
iio:st_pressure: align storagebits on power of 2
Sampled pressure data are 24 bits long and should be stored in a 32 bits
word.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Gregor Boirie [Mon, 27 Jun 2016 10:38:52 +0000 (12:38 +0200)]
iio:st_sensors: align on storagebits boundaries
Ensure triggered buffering memory accesses are properly aligned on per
channel storagebits boundaries.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Jonathan Cameron [Sun, 3 Jul 2016 13:55:50 +0000 (14:55 +0100)]
staging:iio:lis3l02dq drop separate driver
Retire this venerable driver as the basic support is now in the
generic st-sensors accelerometer driver.
There are a few missing features in the new driver:
* Threshold events.
* Access to the calibration adjustment registers (patch shortly)
In exchange it brings a cleaner and more maintainable code base that actually
gets tested more than once every few years. I'll actually be suprised
if anyone other than me has a board with one of these on that is running
an up to date kernel.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Jonathan Cameron [Sun, 22 May 2016 19:39:29 +0000 (20:39 +0100)]
iio: accel: st_accel: Add lis3l02dq support
Time to finally kill off the venerable (it was one of my first drivers)
lis3l02dq driver in favour of adding support in the st sensors framework.
This does loose us the event support that driver always had, but I think
that will reappear at some point and in the meantime the maintenance
advantages of dropping the 'special' driver for this one part outweigh
the issues.
It's worth noting this part is ancient and I may well be the only person
who still has any on hardware running recent kernels.
It has a few 'quirks'.
- No WAI register so that just became optional.
- A BDU option that really does block updates. Completely.
Whatever you do, you don't get any more data with it set.
It is documented the same as more modern parts but I presume they
are actually clearing for updates after a read of both bytes!
- Fixed scale.
- It's too quick. Even at slowest rate (280Hz) I can't read out fast
enough on my board (stargate 2) to beat new data coming in. Linus'
repeat read patch doesn't help in this case. It just means I get 10
readings before dying... So in reality this will get used with
software triggers only unless someone has this long out of production
device on a quick board.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Denis CIOCCA <denis.ciocca@st.com>
Cc: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Matt Ranostay [Sun, 3 Jul 2016 00:26:33 +0000 (17:26 -0700)]
iio: adc: add missing of_node references to iio_dev
Adding missing indio_dev->dev.of_node references to allow iio consumers
to access the device channels.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Matt Ranostay [Fri, 1 Jul 2016 02:33:50 +0000 (19:33 -0700)]
iio: adc: ti-ads1015: add indio_dev->dev.of_node reference
Add the pointer to the device tree node of the ADC so that iio
consumers can reference the respective channels.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Florian Vaussard [Thu, 30 Jun 2016 07:34:51 +0000 (09:34 +0200)]
iio: potentiometer: Fix typo in Kconfig
Fix s/potentiomenter/potentiometer/.
Suggested-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Florian Vaussard [Thu, 30 Jun 2016 07:34:50 +0000 (09:34 +0200)]
iio: potentiometer: mcp4531: Add device tree binding
This patch adds the necessary device tree binding to allow DT probing of
currently supported parts.
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Florian Vaussard [Thu, 30 Jun 2016 07:34:49 +0000 (09:34 +0200)]
iio: potentiometer: mcp4531: Add device tree binding documentation
Add the device tree documentation for all the supported parts. Apart the
compatible string and standard I2C binding, no other binding is currently
needed.
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Florian Vaussard [Thu, 30 Jun 2016 07:34:48 +0000 (09:34 +0200)]
iio: potentiometer: mcp4531: Add support for MCP454x, MCP456x, MCP464x and MCP466x
This patch adds support for MCP454x, MCP456x, MCP464x and MCP466x parts.
The main difference with currently supported parts (MCP453x and alike) is
the addition of a non-volatile memory in order to recall the wiper setting
at power-on. This feature is currently not supported and only the
volatile memory is used to set the wiper.
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Gregor Boirie [Thu, 30 Jun 2016 17:06:34 +0000 (19:06 +0200)]
iio:imu:mpu6050: icm20608 initial support
Introduce support for Invense ICM20608 IMU, a 6-axis motion tracking device
that combines a 3-axis gyroscope and a 3-axis accelerometer:
http://www.invensense.com/products/motion-tracking/6-axis/icm-20608-2
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Florian Vaussard [Thu, 30 Jun 2016 07:43:06 +0000 (09:43 +0200)]
iio: adc: max1363: Add device tree binding
This patch adds the necessary device tree binding to allow DT probing of
currently supported parts.
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Florian Vaussard [Thu, 30 Jun 2016 07:43:05 +0000 (09:43 +0200)]
iio: adc: max1363: Add device tree binding documentation
Add the device tree documentation for all the supported parts. Mandatory
binding is the compatible string and the slave I2C address.
Optional properties can be used to specify the Vcc / Vref regulators, as
well as the IRQ line if available.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Steffen Trumtrar [Thu, 21 Apr 2016 10:49:00 +0000 (12:49 +0200)]
iio: bmg160: add callbacks for the filter frequency
The filter frequency and sample rate have a fixed relationship.
Only the filter frequency is unique, however.
Currently the driver ignores the filter settings for 32 Hz and
64 Hz.
This patch adds the necessary callbacks to be able to configure
and read the filter setting from sysfs.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Raveendra Padasalagi [Tue, 28 Jun 2016 07:40:35 +0000 (13:10 +0530)]
iio: Add driver for Broadcom iproc-static-adc
This patch adds basic driver implementation for Broadcom's
static adc controller used in iProc SoC's family.
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Raveendra Padasalagi [Tue, 28 Jun 2016 07:40:34 +0000 (13:10 +0530)]
Documentation: DT: Add iproc-static-adc binding
The patch adds devicetree binding document for broadcom's
iproc-static-adc controller driver.
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Linus Walleij [Thu, 30 Jun 2016 01:48:54 +0000 (03:48 +0200)]
iio: pressure: bmp280: read calibration data once
The calibration data is described as coming from an E2PROM and that
means it does not change. Just read it once at probe time and store
it in the device state container. Also toss the calibration data
into the entropy pool since it is device unique.
Reviewed-by: Vlad Dogaru <vlad.dogaru@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Linus Walleij [Thu, 30 Jun 2016 01:48:53 +0000 (03:48 +0200)]
iio: pressure: bmp280: add power management
The PM280 has an internal standby-mode, but to really save power
we should shut the sensor down and disconnect the power. With
the proper .pm hooks we can enable both runtime and system power
management of the sensor. We use the *force callbacks from the
system PM hooks. When the sensor comes back we always reconfigure
it to make sure it is ready to roll as expected.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Linus Walleij [Thu, 30 Jun 2016 01:48:52 +0000 (03:48 +0200)]
iio: pressure: bmp280: add support for BMP085 EOC interrupt
The first version of this sensor, BMP085, supports sending an
End-of-Conversion (EOC) interrupt. Add code to support this using
a completion, in a similar vein as drivers/misc/bmp085.c does.
Make sure to check that we are given a rising edge, because the
EOC line goes from low-to-high when the conversion is ready.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Linus Walleij [Thu, 30 Jun 2016 01:48:51 +0000 (03:48 +0200)]
iio: pressure: bmp280: add SPI interface driver
This patch mimics the SPI functionality found in the misc driver in
drivers/misc/bh085-spi.c to make it possible to reuse the existing
BMP280/BMP180/BMP085 driver with all clients of the other driver.
The adoption is straight-forward since like the other driver, it is
a simple matter of using regmap.
This driver is also so obviously inspired/copied from the old misc
driver in drivers/misc/bmp085.c that I just took the liberty to
add in the authors of the other drivers + self in the core driver
file.
The MISC driver also supports a variant named "BMP181" so include
that here to be complete in comparison to the old driver.
The bus mapping code for SPI was written by Akinobu Mita.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Tested-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Linus Walleij [Thu, 30 Jun 2016 01:48:50 +0000 (03:48 +0200)]
iio: pressure: bmp280: split off an I2C Kconfig entry
This creates a separate BMP280_I2C Kconfig entry that gets selected
by BMP280 for I2C transport. As we currently only support I2C
transport there is not much practical change other than getting
a separate object file (or module) for the I2C driver part. The
old Kconfig symbol BMP280 will still select the stuff we need so
that oldconfig and old defconfigs works fine.
Tested-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Linus Walleij [Thu, 30 Jun 2016 01:48:49 +0000 (03:48 +0200)]
iio: pressure: bmp280: split driver in logical parts
This splits the BMP280 driver in three logical parts: the core driver
bmp280-core that only operated on a struct device * and a struct regmap *,
the regmap driver bmp280-regmap that can be shared between I2C and other
transports and the I2C module driver bmp280-i2c.
Cleverly bake all functionality into a single object bmp280.o so that
we still get the same module binary built for the device in the end,
without any fuzz exporting symbols to the left and right.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Linus Walleij [Thu, 30 Jun 2016 01:48:48 +0000 (03:48 +0200)]
iio: pressure: bmp280: support supply regulators
The BMP085/BMP180/BMP280 is supplied with two power sources:
VDDA (analog power) and VDDD (digital power). As these may come
from regulators (as on the APQ8060 Dragonboard) we need the driver
to attempt to fetch and enable these regulators.
We FAIL if we cannot: boards should either define:
- Proper regulators if present
- Define fixed regulators if power is hardwired to the component
- Rely on dummy regulators (will be present on all DT systems and
any boardfile system that calls regulator_has_full_constraints().
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Bijosh Thykkoottathil [Mon, 27 Jun 2016 15:37:41 +0000 (15:37 +0000)]
drivers:iio:light:isl29125: added macros for sensing range
Added macros for sensing range as the corresponding magic numbers
were used at multiple places.
- ISL29125_SENSING_RANGE_0 for 375 lux full range
- ISL29125_SENSING_RANGE_1 for 10k lux full range
Signed-off-by: Bijosh Thykkoottathil <bijosh.t@hotmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Linus Walleij [Wed, 29 Jun 2016 13:14:42 +0000 (15:14 +0200)]
iio: st_sensors: harden interrupt handling
Leonard Crestez observed the following phenomenon: when using
hard interrupt triggers (the DRDY line coming out of an ST
sensor) sometimes a new value would arrive while reading the
previous value, due to latencies in the system.
We discovered that the ST hardware as far as can be observed
is designed for level interrupts: the DRDY line will be held
asserted as long as there are new values coming. The interrupt
handler should be re-entered until we're out of values to
handle from the sensor.
If interrupts were handled as occurring on the edges (usually
low-to-high) new values could appear and the line be held
asserted after that, and these values would be missed, the
interrupt handler would also lock up as new data was
available, but as no new edges occurs on the DRDY signal,
nothing happens: the edge detector only detects edges.
To counter this, do the following:
- Accept interrupt lines to be flagged as level interrupts
using IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW. If the line
is marked like this (in the device tree node or ACPI
table or similar) it will be utilized as a level IRQ.
We mark the line with IRQF_ONESHOT and mask the IRQ
while processing a sample, then the top half will be
entered again if new values are available.
- If we are flagged as using edge interrupts with
IRQF_TRIGGER_RISING or IRQF_TRIGGER_FALLING: remove
IRQF_ONESHOT so that the interrupt line is not
masked while running the thread part of the interrupt.
This way we will never miss an interrupt, then introduce
a loop that polls the data ready registers repeatedly
until no new samples are available, then exit the
interrupt handler. This way we know no new values are
available when the interrupt handler exits and
new (edge) interrupts will be triggered when data arrives.
Take some extra care to update the timestamp in the poll
loop if this happens. The timestamp will not be 100%
perfect, but it will at least be closer to the actual
events. Usually the extra poll loop will handle the new
samples, but once in a blue moon, we get a new IRQ
while exiting the loop, before returning from the
thread IRQ bottom half with IRQ_HANDLED. On these rare
occasions, the removal of IRQF_ONESHOT means the
interrupt will immediately fire again.
- If no interrupt type is indicated from the DT/ACPI,
choose IRQF_TRIGGER_RISING as default, as this is necessary
for legacy boards.
Tested successfully on the LIS331DL and L3G4200D by setting
sampling frequency to 400Hz/800Hz and stressing the system:
extra reads in the threaded interrupt handler occurs.
Cc: Giuseppe Barba <giuseppe.barba@st.com>
Cc: Denis Ciocca <denis.ciocca@st.com>
Tested-by: Crestez Dan Leonard <cdleonard@gmail.com>
Reported-by: Crestez Dan Leonard <cdleonard@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Linus Walleij [Wed, 29 Jun 2016 12:08:38 +0000 (14:08 +0200)]
iio: magn: ak8975: deploy runtime and system PM
This adds runtime PM support to the AK8975 driver. It solves two
problems:
- After reading the first value the chip was left in MODE_ONCE,
meaning (presumably) it may be consuming more power. Now the
runtime PM hooks kick in and set it to POWER_DOWN.
- Regulators were simply enabled and left on, making it
impossible to turn the power consuming regulators off because
of the increased refcount. We now disable the regulators at
autosuspend.
- We also handle system suspend: by using pm_runtime_force_suspend()
and pm_runtime_force_resume() from the system PM sleep hooks,
the runtime PM code is managing the power also for this case.
It is currently not completely optimal: when the system resumes
the AK8975 goes into active mode even if noone is going to use
it: currently the force calls need to be paired, but the runtime
PM people are working on making it possible to leave devices
runtime suspended when coming back from sleep.
Inspired by my work on the BH1780 light sensor driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Linus Walleij [Wed, 29 Jun 2016 12:08:37 +0000 (14:08 +0200)]
iio: magn: ak8975: make sure to power down at remove()
The code was not powering the magnetometer down properly at
remove(): just cutting the regulators without first setting the
device in power off mode. Fix this.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Linus Walleij [Wed, 29 Jun 2016 12:08:36 +0000 (14:08 +0200)]
iio: magn: ak8975: allow a delay after enabling regulators
The datasheet actually specifies that we need to wait atleast
500us after powering on the device before trying to set mode.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Linus Walleij [Wed, 29 Jun 2016 12:08:35 +0000 (14:08 +0200)]
iio: magn: ak8975: refactor regulator handlers
Move the regulator_get() calls directly into the probe() function,
keep only the power_on()/power_off() functions to flick the
regulators on/off.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Linus Walleij [Wed, 29 Jun 2016 12:08:34 +0000 (14:08 +0200)]
iio: magn: ak8975: add Vid regulator
The AK8975 has two power sources: Vdd (analog voltage supply)
and Vid (digital voltage supply). Optionally also obtain the Vid
supply regulator and enable it.
If an error occurs when enabling one of the regulators: bail out.
Cc: Gregor Boirie <gregor.boirie@parrot.com>
Cc: Richard Leitner <dev@g0hl1n.net>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Linus Walleij [Wed, 29 Jun 2016 12:08:33 +0000 (14:08 +0200)]
iio: magn: ak8975: fix regulator usage
IS_ERR_OR_NULL() should never be used with regulators because
a NULL pointer may be a perfectly valid dummy regulator
We should always succeed to fetch and enable a regulator, but
it may be a dummy. That is fine, so bail out for any real
errors or probe deferrals
Include the error code in the warning print so we know what
kind of problem we're dealing with (for example it is nice to
see if it is a probe deferral).
As we will bail out of probe if the regulator is erroneous,
just issue regulator_disable() on the poweroff path: it will
succeed.
Cc: Mark Brown <broonie@kernel.org>
Cc: Lars-Peter Clausen Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Linus Walleij [Thu, 30 Jun 2016 01:48:47 +0000 (03:48 +0200)]
iio: pressure: bmp280: add reset GPIO line handling
On the APQ8060 Dragonboard the reset line to the BMP085 pressure
sensor is not deasserted on boot, so the driver needs to handle
this. For a simple GPIO line supplied as a descriptor (from a board
file, device tree or ACPI) this does the trick.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Linus Walleij [Thu, 30 Jun 2016 01:48:46 +0000 (03:48 +0200)]
iio: pressure: bmp280: support device tree initialization
This adds device tree support to the BMP085, BMP180 and BMP280
pressure sensors. Tested on the Qualcomm APQ8060 Dragonboard:
iio:device1$ cat in_temp_input
26700
iio:device1$ cat in_pressure_input
99.
185000000
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Linus Walleij [Thu, 30 Jun 2016 01:48:45 +0000 (03:48 +0200)]
iio: pressure: bmp280: augment DT bindings
This adds standard device tree bindings for a reset GPIO line, and
the VDDD and VDDA power regulators.
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Gregor Boirie [Wed, 9 Mar 2016 18:05:49 +0000 (19:05 +0100)]
iio:core: timestamping clock selection support
Adds a new per-device sysfs attribute "current_timestamp_clock" to allow
userspace to select a particular POSIX clock for buffered samples and
events timestamping.
Following clocks, as listed in clock_gettime(2), are supported:
CLOCK_REALTIME, CLOCK_MONOTONIC, CLOCK_MONOTONIC_RAW,
CLOCK_REALTIME_COARSE, CLOCK_MONOTONIC_COARSE, CLOCK_BOOTTIME and
CLOCK_TAI.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Acked-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Gregor Boirie [Wed, 9 Mar 2016 18:05:48 +0000 (19:05 +0100)]
timekeeping: export get_monotonic_coarse64 symbol
EXPORT_SYMBOL() get_monotonic_coarse64 for new IIO timestamping clock
selection usage. This provides user apps the ability to request a
particular IIO device to timestamp samples using a monotonic coarse clock
granularity.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Greg Kroah-Hartman [Wed, 29 Jun 2016 22:35:01 +0000 (15:35 -0700)]
Merge tag 'iio-for-4.8b' of git://git./linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second round of new iio device support, features and cleanups in the 4.8 cycle
Firstly some contact detail updates:
* NXP took over freescale. Update the mma8452 header to reflect this.
* Martin Kepplinger email address change in mma8452 header.
* Adriana Reus has changed email address. Update .mailmap.
* Matt Ranostay has changed email address. Update .mailmap.
New Device Support
* max1363
- add the missing i2c_device_ids for a couple of parts so they can actually
be used.
* ms5867
- add device ids for ms5805 and ms5837 parts.
New Features
* ad5755
- DT support. This one was a bit controversial and under review for a long
time. Still no one could come up with a better solution.
* stx104
- add gpio support
* ti-adc081c
- Add ACPI device ID matching.
Core changes
* Refuse to register triggers with duplicate names. There is no way to
distinguish between them so this makes no sense. A few drivers do not
generate unique names for each instance of the device present. We can't
fix this without changing ABI so leave them and wait for someone to
actually take the rare step of two identical accelerometers on the same
board.
* buffer-dma
- use ARRAY_SIZE in a few appropriate locations.
Tools
* Fix the fact that the --trigger-num option in generic_buffer didn't allow
0 which is perfectly valid in the ABI.
Cleanups
* as3935
- improve error reporting.
- remove redundant zeroing of a field in iio_priv.
* gp2ap020a00f
- use the iio_device_claim_*_mode helpers rather than open coding locking
around mode changes.
* isl29125
- use the iio_device_claim_*_mode helpers rather than open coding locking.
* lidar
- use the iio_device_claim_*_mode helpers rather than open coding locking.
* mma8452
- more detail in devices supported description in comments (addresses and
similar)
* sca3000
- add a missing error check.
* tcs3414
- use the iio_device_claim_*_mode helpers rather than open coding locking.
* tcs3472
- use the iio_device_claim_*_mode helpers rather than open coding locking.
Sean Nyekjaer [Mon, 27 Jun 2016 08:27:18 +0000 (10:27 +0200)]
iio: ad5755: Add DT binding documentation
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Sean Nyekjaer [Mon, 27 Jun 2016 08:27:17 +0000 (10:27 +0200)]
iio: ad5755: add support for dt bindings
Devicetree can provide platform data
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Phil Reid [Mon, 27 Jun 2016 03:17:56 +0000 (11:17 +0800)]
iio: buffer-dma: Use ARRAY_SIZE in for loop range
Use the ARRAY_SIZE macro in the for loops that access queue->fileio.blocks.
Macro is already used in a couple of places where this access occurs,
but range was hardcoded in these locations.
Signed-off-by: Phil Reid <preid@electromag.com.au>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Florian Vaussard [Tue, 21 Jun 2016 07:09:27 +0000 (09:09 +0200)]
iio: adc: max1363: Fix missing i2c_device_id for MAX1164x parts
The driver supports MAX11644, MAX11645, MAX11646 and MAX11647 parts. But
the corresponding i2c_device_id are missing. Add them!
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Matt Ranostay [Thu, 16 Jun 2016 01:47:02 +0000 (18:47 -0700)]
iio: proximity: as3935: remove redundant zeroing of tune_cap
This is redundant as the containing stucture is allocated as part of
iio_device_alloc using kzalloc and hence is already 0.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
William Breathitt Gray [Mon, 13 Jun 2016 13:06:48 +0000 (09:06 -0400)]
iio: stx104: Add GPIO support for the Apex Embedded Systems STX104
The Apex Embedded Systems STX104 device features eight lines of digital
I/O (four digital inputs and four digital outputs). This patch adds GPIO
support for these eight lines of digital I/O via GPIOLIB.
Cc: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Arnd Bergmann [Mon, 30 May 2016 14:52:04 +0000 (16:52 +0200)]
iio: as3935: improve error reporting in as3935_event_work
gcc warns about a potentially uninitialized variable use
in as3935_event_work:
drivers/iio/proximity/as3935.c: In function ‘as3935_event_work’:
drivers/iio/proximity/as3935.c:231:6: error: ‘val’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
This case specifically happens when spi_w8r8() fails with a
negative return code. We check all other users of this function
except this one.
As the error is rather unlikely to happen after the device
has already been initialized, this just adds a dev_warn().
Another warning already exists in the same function, but is
missing a trailing '\n' character, so I'm fixing that too.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Luis de Bethencourt [Wed, 22 Jun 2016 19:43:31 +0000 (20:43 +0100)]
staging: iio: accel: add error check
Go to error_ret if sca3000_read_ctrl_reg() failed.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Dan O'Donovan [Fri, 27 May 2016 17:37:30 +0000 (18:37 +0100)]
iio: adc: ti-adc081c: add ACPI device ID matching
Add ACPI device ID matching for TI ADC081C/ADC101C/ADC121C ADCs.
Signed-off-by: Dan O'Donovan <dan@emutex.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Crestez Dan Leonard [Mon, 23 May 2016 18:40:01 +0000 (21:40 +0300)]
iio: Refuse to register triggers with duplicate names
The trigger name is documented as unique but drivers are currently
allowed to register triggers with duplicate names. This should be
considered a bug since it makes the 'current_trigger' interface
unusable.
Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Ioana Radulescu [Wed, 22 Jun 2016 21:40:52 +0000 (16:40 -0500)]
staging: fsl-mc: convert mc command build/parse to use C structs
The layer abstracting the building of commands and extracting
responses is currently based on macros that shift and mask the command
fields and requires exposing offset/size values as macro parameters
and makes the code harder to read.
For clarity and maintainability, instead use an implementation based on
mapping the MC command definitions to C structures. These structures
contain the hardware command fields (which are naturally-aligned)
and individual fields are little-endian ordering (the byte ordering
of the hardware).
As such, there is no need to perform the conversion between core and
hardware (LE) endianness in mc_send_command(), but instead each
individual field in a command will be converted separately if needed
by the function building the command or extracting the response.
This patch does not introduce functional changes, both the hardware
ABIs and the APIs exposed for the DPAA2 objects remain the same.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stuart Yoder [Wed, 22 Jun 2016 21:40:51 +0000 (16:40 -0500)]
staging: fsl-mc: properly set hwirq in msi set_desc
For an MSI domain the hwirq is an arbitrary but unique
id to identify an interrupt. Previously the hwirq was set to
the MSI index of the interrupt, but that only works if there is
one DPRC. Additional DPRCs require an expanded namespace. Use
both the ICID (which is unique per DPRC) and the MSI index to
compose a hwirq value.
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stuart Yoder [Wed, 22 Jun 2016 21:40:50 +0000 (16:40 -0500)]
staging: fsl-mc: dprc: fix ordering problem freeing resources in remove of dprc
When unbinding a dprc from the dprc driver the cleanup of
the resource pools must happen after irq pool cleanup
is done.
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stuart Yoder [Wed, 22 Jun 2016 21:40:49 +0000 (16:40 -0500)]
staging: fsl-mc: dprc: add missing irq free
add missing free of the Linux irq when tearing down interrupts
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bharat Bhushan [Wed, 22 Jun 2016 21:40:48 +0000 (16:40 -0500)]
staging: fsl-mc: fix asymmetry in destroy of mc_io
An mc_io represents a mapped MC portal. Previously, an mc_io was
created for the root dprc in fsl_mc_bus_probe() and for child dprcs
in dprc_probe(). But the free of that data structure happened in the
general bus remove callback. This asymmetry resulted in some bugs due
to unwanted destroys of mc_io object in some scenarios (e.g. vfio).
Fix this bug by making things symmetric-- mc_io created in
fsl_mc_bus_probe() is freed in fsl_mc_bus_remove(). The mc_io created
in dprc_probe() is freed in dprc_remove().
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
[Stuart: added check for root dprc and reworded commit message]
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stuart Yoder [Wed, 22 Jun 2016 21:40:47 +0000 (16:40 -0500)]
staging: fsl-mc: make fsl_mc_is_root_dprc() global
make fsl_mc_is_root_dprc() global so that the dprc driver
can use it
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stuart Yoder [Wed, 22 Jun 2016 21:40:46 +0000 (16:40 -0500)]
staging: fsl-mc: export mc_get_version
some drivers (built as modules) rely on mc_get_version()
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stuart Yoder [Wed, 22 Jun 2016 21:40:45 +0000 (16:40 -0500)]
staging: fsl-mc: add support for device table matching
Move the definition of fsl_mc_device_id to its proper location in
mod_devicetable.h, and add fsl-mc bus support to devicetable-offsets.c
and file2alias.c to enable device table matching. With this patch udev
based module loading of fsl-mc drivers is supported.
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stuart Yoder [Wed, 22 Jun 2016 21:40:44 +0000 (16:40 -0500)]
staging: fsl-mc: clean up the device id struct
-rename the struct used for fsl-mc device ids to be more
consistent with other busses
-remove the now obsolete and unused version fields
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stuart Yoder [Wed, 22 Jun 2016 21:40:43 +0000 (16:40 -0500)]
staging: fsl-mc: implement uevent callback and set the modalias
Replace placeholder code in the uevent callback to properly
set the MODALIAS env variable.
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stuart Yoder [Wed, 22 Jun 2016 21:40:42 +0000 (16:40 -0500)]
staging: fsl-mc: add support for the modalias sysfs attribute
In order to support uevent based module loading implement modalias support
for the fsl-mc bus driver. Aliases are based on vendor and object/device
id and are of the form "fsl-mc:vNdN".
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Fri, 17 Jun 2016 17:34:17 +0000 (17:34 +0000)]
staging: wilc1000: fix return value check in wlan_initialize_threads()
In case of error, the function kthread_run() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luis de Bethencourt [Thu, 23 Jun 2016 17:57:09 +0000 (18:57 +0100)]
staging: wilc1000: arrays can't be NULL
hif_drv->usr_scan_req.net.net_info[i] contains found_net_info structs
which have the following element:
u8 bssid[6];
pstrNetworkInfo, of type network_info, also contains an u8 array named
bssid.
request->ssids is an array of cfg80211_ssid structs. Making ssid:
u8 ssid[IEEE80211_MAX_SSID_LEN];
In these 3 cases the arrays are being checked against NULL, which can't
happen. Removing the checks since they will always be true.
Found with smatch:
drivers/staging/wilc1000/host_interface.c:1234 Handle_RcvdNtwrkInfo() warn: this array is probably non-NULL. 'hif_drv->usr_scan_req.net_info[i].bssid'
drivers/staging/wilc1000/host_interface.c:1235 Handle_RcvdNtwrkInfo() warn: this array is probably non-NULL. 'pstrNetworkInfo->bssid'
drivers/staging/wilc1000/host_interface.c:1253 Handle_RcvdNtwrkInfo() warn: this array is probably non-NULL. 'hif_drv->usr_scan_req.net_info[hif_drv->usr_scan_req.rcvd_ch_cnt].bssid'
drivers/staging/wilc1000/host_interface.c:1254 Handle_RcvdNtwrkInfo() warn: this array is probably non-NULL. 'pstrNetworkInfo->bssid'
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Binoy Jayan [Thu, 23 Jun 2016 05:41:52 +0000 (11:11 +0530)]
staging: wilc1000: Change interface wilc_mq_send to wilc_enqueue_cmd
Replace the interface 'wilc_mq_send' with 'wilc_enqueue_cmd'
and remove the now unused structures 'message' and 'message_queue'.
Restructure switch statement in the work queue helper function
host_if_work and remove unwanted indentation.
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Binoy Jayan [Thu, 23 Jun 2016 05:41:51 +0000 (11:11 +0530)]
staging: wilc1000: Replace kthread with workqueue for host interface
Deconstruct the kthread / message_queue logic, replacing it with
create_singlethread_workqueue() / queue_work() setup, by adding a
'struct work_struct' to 'struct host_if_msg'. The current kthread
hostIFthread() is converted to a work queue helper with the name
'host_if_work'.
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Binoy Jayan [Thu, 23 Jun 2016 05:41:50 +0000 (11:11 +0530)]
staging: wilc1000: message_queue: Move code to host interface
Move the contents of wilc_msgqueue.c and wilc_msgqueue.h into
host_interface.c, remove 'wilc_msgqueue.c' and 'wilc_msgqueue.h'.
This is done so as to restructure the implementation of the kthread
'hostIFthread' using a work queue.
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Binoy Jayan [Wed, 15 Jun 2016 05:30:38 +0000 (11:00 +0530)]
staging: wilc1000: Remove semaphore close_exit_sync
The semaphore 'close_exit_sync' does not serve any purpose other
than delaying the deregistration of the device which it is trying
to protect from shared access. 'up' is called only when a subdevice
is closed and not when it is opened. So, the semaphore count only
goes up when the device is used.
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Binoy Jayan [Wed, 15 Jun 2016 05:30:37 +0000 (11:00 +0530)]
staging: wilc1000: Replace semaphore sync_event with completion
The semaphore 'sync_event' is used as completion, so convert
it to a struct completion type. Also, return -ETIME if the return
value of wait_for_completion_timeout is 0.
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Binoy Jayan [Wed, 15 Jun 2016 05:30:36 +0000 (11:00 +0530)]
staging: wilc1000: Replace semaphore cfg_event with completion
The semaphore 'cfg_event' is used as completion, so convert
it to a struct completion type.
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Binoy Jayan [Wed, 15 Jun 2016 05:30:35 +0000 (11:00 +0530)]
staging: wilc1000: Replace semaphore txq_add_to_head_cs with mutex
The semaphore 'txq_add_to_head_cs' is a simple mutex, so it should be
written as one. Semaphores are going away in the future. Also, removing
the timeout scenario as the error handling code does not propagate the
timeout properly.
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Binoy Jayan [Wed, 15 Jun 2016 05:30:34 +0000 (11:00 +0530)]
staging: wilc1000: Replace semaphore txq_event with completion
The semaphore 'txq_event' is used as completion, so convert it
to a struct completion type.
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julia Lawall [Tue, 17 May 2016 14:38:43 +0000 (16:38 +0200)]
staging: wilc1000: fix typo
firmare -> firmware
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Thu, 23 Jun 2016 13:14:07 +0000 (14:14 +0100)]
staging: wilc1000: fix spelling mistake: "interupts" -> "interrupts"
trivial fix to spelling mistake in dev_err messages
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Sun, 12 Jun 2016 23:28:15 +0000 (08:28 +0900)]
staging: wilc1000: remove unnecesary type cast of bss_type
There is no need to use type cast of bss_type because
hif_drv->cfg_values.bss_type is u8.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Sun, 12 Jun 2016 23:28:14 +0000 (08:28 +0900)]
staging: wilc1000: add bss_type to remove line over 80 characters
A local bss_type variable is added to remove checkpatch warning of
line over 80 characters.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Sun, 12 Jun 2016 23:28:13 +0000 (08:28 +0900)]
staging: wilc1000: remove unused struct set_mac_addr
struct set_mac_addr is not used anymore, so just remove it.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Sun, 12 Jun 2016 23:28:12 +0000 (08:28 +0900)]
staging: wilc1000: rename result in handle_cfg_param
This patch renames result to ret that is used to get return value from
wilc_send_config_pkt. Some handle_*() functions are used as result,
others are used as ret. It will be changed as ret in all handle_*()
functions to match variable name.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Sun, 12 Jun 2016 23:28:11 +0000 (08:28 +0900)]
staging: wilc1000: change data type of result in handle_cfg_param
This patch changes data type of result variable from s32 to int. result
is used to get return value from wilc_send_config_pkt that has return
type of int.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chaehyun Lim [Sun, 12 Jun 2016 23:28:10 +0000 (08:28 +0900)]
staging: wilc1000: change handle_cfg_param's return type to void
When handle_cfg_param is called in hostIFthread that is a kernel thread,
it is not checked return type of this function. This patch changes
return type to void.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Dilger [Mon, 20 Jun 2016 20:55:52 +0000 (16:55 -0400)]
staging: lustre: quiet lockdep recursive lock warning
Lockdep complains about potential recursive locking during mount
because the client configuration log is holding a lock on the MGC
obd_device to prevent it from being torn down, while also getting
mutexes on the MDC and OSC devices as they are instantiated:
Lustre: Mounted myth-client
=============================================
[ INFO: possible recursive locking detected ]
4.7.0-rc2-vm-nfs+ #127 Tainted: G C
---------------------------------------------
May be due to missing lock nesting notation
2 locks held by ll_cfg_requeue/5928:
#0: (&cli->cl_sem){.+.+.+}, at: mgc_requeue_thread+0x15d/0x730 [mgc]
#1: (&cld->cld_lock){+.+.+.}, at: mgc_process_log+0x5e/0xf80 [mgc]
CPU: 0 PID: 5928 Comm: ll_cfg_requeue
Call Trace:
[<
ffffffff814a0855>] dump_stack+0x86/0xc1
[<
ffffffff810e7766>] __lock_acquire+0x726/0x1210
[<
ffffffff810e86be>] lock_acquire+0xfe/0x1f0
[<
ffffffff81888171>] down_read+0x51/0xa0
[<
ffffffffa04a8477>] sptlrpc_conf_client_adapt+0x47/0x150 [ptlrpc]
[<
ffffffffa0186b16>] mdc_set_info_async+0x2b6/0x470 [mdc]
[<
ffffffffa0294090>] class_notify_sptlrpc_conf+0x190/0x360 [obdclass]
[<
ffffffffa01a9e85>] mgc_process_log+0x925/0xf80 [mgc]
[<
ffffffffa01abafa>] mgc_requeue_thread+0x1fa/0x730 [mgc]
[<
ffffffff810af331>] kthread+0x101/0x120
[<
ffffffff8188ad6f>] ret_from_fork+0x1f/0x40
Add a separate lock class for the MGC callpath, since it will always
be held first, and none of the other obd_device locks should ever
be held concurrently.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Mon, 20 Jun 2016 20:55:51 +0000 (16:55 -0400)]
staging/lustre/libcfs: Do not call kthread_run in wrong state
kthread_run might sleep during an allocation, and so
it's considered unsafe to call with a state that's not
RUNNABLE.
Move the state setting to after kthread_run call.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andriy Skulysh [Mon, 20 Jun 2016 20:55:50 +0000 (16:55 -0400)]
staging/lustre/osc: glimpse lock should match only with granted locks
A deadlock is possible during ccc_prep_size()->ldlm_lock_match() vs
cl_io_lock() which is waiting for a matched lock and conflicts with
already taken lock before ccc_prep_size().
It is better to send an additional lock request to avoid deadlock.
Seagate-bug-id: MRP-3312
Signed-off-by: Andriy Skulysh <andriy.skulysh@seagate.com>
Reviewed-on: http://review.whamcloud.com/18738
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7829
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Mon, 20 Jun 2016 20:55:49 +0000 (16:55 -0400)]
staging/lustre: Add documentation for unstable_stats in sysfs
commit
ac5b14810952 ("staging: lustre: osc: Track and limit
"unstable" pages") added a new sysfs variable, but corresponding bit of
documentation was not forgotten.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Mon, 20 Jun 2016 20:55:48 +0000 (16:55 -0400)]
staging/lustre/osc: fix signed one bit field
Bit field 'oi_lockless' and 'oi_is_active' has one bit and is signed
which is confusing.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-on: http://review.whamcloud.com/19196
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7258
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
akam kumar bharathi [Mon, 20 Jun 2016 20:55:47 +0000 (16:55 -0400)]
staging/lustre/llite: IOC_MDC_GETFILEINFO returns the wrong ino
req_capsule_server_get() through __req_capsule_get in ll_dir_ioctl()
returns a pointer to a PTLRPC request or reply buffer, which is assigned
to struct mdt_body.
If the command is IOC_MDS_GETFILEINFO then the inode "st.st_ino" should
be assigned from one extracted from mdt_body through cl_fid_build_ino().
Signed-off-by: John Hammond <john.hammond@intel.com>
Signed-off-by: akam kumar bharathi <azurelustre@gmail.com>
Reviewed-on: http://review.whamcloud.com/17618
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5954
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Mon, 20 Jun 2016 20:55:46 +0000 (16:55 -0400)]
staging/lustre/llite: ll_revalidate_dentry update
There are a couple of cases in ll_revalidate_dentry() where
we are pretty sure the dentry is valid, so check for them early
and save more expensive checks for later.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Mon, 20 Jun 2016 20:55:45 +0000 (16:55 -0400)]
staging/lustre/llite: Restore proper opencache operations
Mark dentries that came to us via NFS in a special way so that
we can tell them apart during open and activate open cache
(we really don't want to do open/close RPC for every NFS IO).
This became needed since dentry revlidate no longer reimplements
any RPCs for lookup, and as such if a dentry is valid,
ll_revalidate_dentry returns 1 and ll_lookup_it() is never visited
during opens, we get straght into ll_file_open() without a valid
intent/RPC. This used to be only true for NFS, so opencache was
engaged needlessly, and it carries a cost of it's own if there is
in fact no repetitive file opening-closing going on
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-on: http://review.whamcloud.com/20354
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8019
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Li Xi <lixi@ddn.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergey Cheremencev [Mon, 20 Jun 2016 20:55:44 +0000 (16:55 -0400)]
staging/lustre/llite: don't panic when fid is insane
LASSERT should never be done on data that is
received to over the network. Return EINVAL
when server returns invalid fid despite of
it_status == 0.
Signed-off-by: Sergey Cheremencev <sergey.cheremencev@seagate.com>
Seagate-bug-id: MRP-3073
Reviewed-on: http://review.whamcloud.com/17985
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7422
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>