f2fs: complete checkpoints during remount

commit 4f99484d27961cb194cebcd917176fa038a5025f upstream.

Otherwise, pending checkpoints can contribute a race condition to give a
quota warning.

- Thread                      - checkpoint thread
                              add checkpoints to the list
do_remount()
 down_write(&sb->s_umount);
 f2fs_remount()
                              block_operations()
                               down_read_trylock(&sb->s_umount) = 0
 up_write(&sb->s_umount);
                               f2fs_quota_sync()
                                dquot_writeback_dquots()
                                 WARN_ON_ONCE(!rwsem_is_locked(&sb->s_umount));

Or,

do_remount()
 down_write(&sb->s_umount);
 f2fs_remount()
                              create a ckpt thread
                              f2fs_enable_checkpoint() adds checkpoints
      wait for f2fs_sync_fs()
                              trigger another pending checkpoint
                               block_operations()
                                down_read_trylock(&sb->s_umount) = 0
 up_write(&sb->s_umount);
                                f2fs_quota_sync()
                                 dquot_writeback_dquots()
                                  WARN_ON_ONCE(!rwsem_is_locked(&sb->s_umount));

Cc: stable@vger.kernel.org
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: set generation before calling btrfs_clean_tree_block in btrfs_init_new_buffer

commit cbddcc4fa3443fe8cfb2ff8e210deb1f6a0eea38 upstream.

syzbot is reporting uninit-value in btrfs_clean_tree_block() [1], for
commit bc877d285ca3dba2 ("btrfs: Deduplicate extent_buffer init code")
missed that btrfs_set_header_generation() in btrfs_init_new_buffer() must
not be moved to after clean_tree_block() because clean_tree_block() is
calling btrfs_header_generation() since commit 55c69072d6bd5be1 ("Btrfs:
Fix extent_buffer usage when nodesize != leafsize").

Since memzero_extent_buffer() will reset "struct btrfs_header" part, we
can't move btrfs_set_header_generation() to before memzero_extent_buffer().
Just re-add btrfs_set_header_generation() before btrfs_clean_tree_block().

Link: https://syzkaller.appspot.com/bug?extid=fba8e2116a12609b6c59
Reported-by: syzbot <syzbot+fba8e2116a12609b6c59@syzkaller.appspotmail.com>
Fixes: bc877d285ca3dba2 ("btrfs: Deduplicate extent_buffer init code")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix race between quota enable and quota rescan ioctl

commit 331cd9461412e103d07595a10289de90004ac890 upstream.

When enabling quotas, at btrfs_quota_enable(), after committing the
transaction, we change fs_info->quota_root to point to the quota root we
created and set BTRFS_FS_QUOTA_ENABLED at fs_info->flags. Then we try
to start the qgroup rescan worker, first by initializing it with a call
to qgroup_rescan_init() - however if that fails we end up freeing the
quota root but we leave fs_info->quota_root still pointing to it, this
can later result in a use-after-free somewhere else.

We have previously set the flags BTRFS_FS_QUOTA_ENABLED and
BTRFS_QGROUP_STATUS_FLAG_ON, so we can only fail with -EINPROGRESS at
btrfs_quota_enable(), which is possible if someone already called the
quota rescan ioctl, and therefore started the rescan worker.

So fix this by ignoring an -EINPROGRESS and asserting we can't get any
other error.

Reported-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/linux-btrfs/20220823015931.421355-1-yebin10@huawei.com/
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: record I_DIRTY_TIME even if inode already has I_DIRTY_INODE

commit cbfecb927f429a6fa613d74b998496bd71e4438a upstream.

Currently the I_DIRTY_TIME will never get set if the inode already has
I_DIRTY_INODE with assumption that it supersedes I_DIRTY_TIME.  That's
true, however ext4 will only update the on-disk inode in
->dirty_inode(), not on actual writeback. As a result if the inode
already has I_DIRTY_INODE state by the time we get to
__mark_inode_dirty() only with I_DIRTY_TIME, the time was already filled
into on-disk inode and will not get updated until the next I_DIRTY_INODE
update, which might never come if we crash or get a power failure.

The problem can be reproduced on ext4 by running xfstest generic/622
with -o iversion mount option.

Fix it by allowing I_DIRTY_TIME to be set even if the inode already has
I_DIRTY_INODE. Also make sure that the case is properly handled in
writeback_single_inode() as well. Additionally changes in
xfs_fs_dirty_inode() was made to accommodate for I_DIRTY_TIME in flag.

Thanks Jan Kara for suggestions on how to make this work properly.

Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220825100657.44217-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: Fix user namespace mapping

commit 7c88c1e0ab1704bacb751341ee6431c3be34b834 upstream.

A kernel daemon should not rely on the current thread, which is unknown
and might be malicious.  Before this security fix,
ksmbd_override_fsids() didn't correctly override FS UID/GID which means
that arbitrary user space threads could trick the kernel to impersonate
arbitrary users or groups for file system access checks, leading to
file system access bypass.

This was found while investigating truncate support for Landlock:
https://lore.kernel.org/r/CAKYAXd8fpMJ7guizOjHgxEyyjoUwPsx3jLOPZP=wPYcbhkVXqA@mail.gmail.com

Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Steve French <smfrench@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220929100447.108468-1-mic@digikod.net
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: Fix wrong return value and message length check in smb2_ioctl()

commit b1763d265af62800ec96eeb79803c4c537dcef3a upstream.

Commit c7803b05f74b ("smb3: fix ksmbd bigendian bug in oplock
break, and move its struct to smbfs_common") use the defination
of 'struct validate_negotiate_info_req' in smbfs_common, the
array length of 'Dialects' changed from 1 to 4, but the protocol
does not require the client to send all 4. This lead the request
which satisfied with protocol and server to fail.

So just ensure the request payload has the 'DialectCount' in
smb2_ioctl(), then fsctl_validate_negotiate_info() will use it
to validate the payload length and each dialect.

Also when the {in, out}_buf_len is less than the required, should
goto out to initialize the status in the response header.

Fixes: f7db8fd03a4b ("ksmbd: add validation in smb2_ioctl")
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix endless loop when encryption for response fails

commit 360c8ee6fefdb496fffd2c18bb9a96a376a1a804 upstream.

If ->encrypt_resp return error, goto statement cause endless loop.
It send an error response immediately after removing it.

Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: smscufx: Fix use-after-free in ufx_ops_open()

commit 5610bcfe8693c02e2e4c8b31427f1bdbdecc839c upstream.

A race condition may occur if the user physically removes the
USB device while calling open() for this device node.

This is a race condition between the ufx_ops_open() function and
the ufx_usb_disconnect() function, which may eventually result in UAF.

So, add a mutex to the ufx_ops_open() and ufx_usb_disconnect() functions
to avoid race contidion of krefs.

Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback

commit 4635c0e2a7f7f3568cbfccae70121f9835efa62c upstream.

Before the split of gpio and pinctrl sections in their own driver,
rockchip_set_mux was called in pinmux_ops.gpio_set_direction for
configuring a pin in its GPIO function.

This is essential for cases where pinctrl is "bypassed" by gpio
consumers otherwise the GPIO function is not configured for the pin and
it does not work. Such was the case for the sysfs/libgpiod userspace
GPIO handling.

Let's re-implement the pinmux_ops.gpio_set_direction callback so that
the gpio subsystem can request from the pinctrl driver to put the pin in
its GPIO function.

Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes")
Cc: stable@vger.kernel.org
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20220930132033.4003377-2-foss+kernel@0leil.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: rockchip: request GPIO mux to pinctrl when setting direction

commit 8ea8af6c8469156ac2042d83d73f6b74eb4b4b45 upstream.

Before the split of gpio and pinctrl sections in their own driver,
rockchip_set_mux was called in pinmux_ops.gpio_set_direction for
configuring a pin in its GPIO function.

This is essential for cases where pinctrl is "bypassed" by gpio
consumers otherwise the GPIO function is not configured for the pin and
it does not work. Such was the case for the sysfs/libgpiod userspace
GPIO handling.

Let's call pinctrl_gpio_direction_input/output when setting the
direction of a GPIO so that the pinctrl core requests from the rockchip
pinctrl driver to put the pin in its GPIO function.

Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes")
Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio")
Cc: stable@vger.kernel.org
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20220930132033.4003377-3-foss+kernel@0leil.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qedf: Populate sysfs attributes for vport

commit 592642e6b11e620e4b43189f8072752429fc8dc3 upstream.

Few vport parameters were displayed by systool as 'Unknown' or 'NULL'.
Copy speed, supported_speed, frame_size and update port_type for NPIV port.

Link: https://lore.kernel.org/r/20220919134434.3513-1-njavali@marvell.com
Cc: stable@vger.kernel.org
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

slimbus: qcom-ngd: cleanup in probe error path

commit 16f14551d0df9e7cd283545d7d748829594d912f upstream.

Add proper error path in probe() to cleanup resources previously
acquired/allocated to fix warnings visible during probe deferral:

  notifier callback qcom_slim_ngd_ssr_notify already registered
  WARNING: CPU: 6 PID: 70 at kernel/notifier.c:28 notifier_chain_register+0x5c/0x90
  Modules linked in:
  CPU: 6 PID: 70 Comm: kworker/u16:1 Not tainted 6.0.0-rc3-next-20220830 #380
  Call trace:
   notifier_chain_register+0x5c/0x90
   srcu_notifier_chain_register+0x44/0x90
   qcom_register_ssr_notifier+0x38/0x4c
   qcom_slim_ngd_ctrl_probe+0xd8/0x400
   platform_probe+0x6c/0xe0
   really_probe+0xbc/0x2d4
   __driver_probe_device+0x78/0xe0
   driver_probe_device+0x3c/0x12c
   __device_attach_driver+0xb8/0x120
   bus_for_each_drv+0x78/0xd0
   __device_attach+0xa8/0x1c0
   device_initial_probe+0x18/0x24
   bus_probe_device+0xa0/0xac
   deferred_probe_work_func+0x88/0xc0
   process_one_work+0x1d4/0x320
   worker_thread+0x2cc/0x44c
   kthread+0x110/0x114
   ret_from_fork+0x10/0x20

Fixes: e1ae85e1830e ("slimbus: qcom-ngd-ctrl: add Protection Domain Restart Support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122910.170730-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

slimbus: qcom-ngd: use correct error in message of pdr_add_lookup() failure

commit 5038d21dde818fe74ba1fcb6f2cee35b8c2ebbf2 upstream.

Use correct error code, instead of previous 'ret' value, when printing
error from pdr_add_lookup() failure.

Fixes: e1ae85e1830e ("slimbus: qcom-ngd-ctrl: add Protection Domain Restart Support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122910.170730-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/boot: Explicitly disable usage of SPE instructions

commit 110a58b9f91c66f743c01a2c217243d94c899c23 upstream.

uImage boot wrapper should not use SPE instructions, like kernel itself.
Boot wrapper has already disabled Altivec and VSX instructions but not SPE.
Options -mno-spe and -mspe=no already set when compilation of kernel, but
not when compiling uImage wrapper yet. Fix it.

Cc: stable@vger.kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220827134454.17365-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain

commit 4c081324df5608b73428662ca54d5221ea03a6bd upstream.

Intel Xeon servers used to use a fixed energy resolution (15.3uj) for
Dram RAPL domain. But on SPR, Dram RAPL domain follows the standard
energy resolution as described in MSR_RAPL_POWER_UNIT.

Remove the SPR dram_domain_energy_unit quirk.

Fixes: 2d798d9f5967 ("powercap: intel_rapl: add support for Sapphire Rapids")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSD: Protect against send buffer overflow in NFSv3 READ

commit fa6be9cc6e80ec79892ddf08a8c10cabab9baf38 upstream.

Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply at the same time.

Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.

A client can force this shrinkage on TCP by sending a correctly-
formed RPC Call header contained in an RPC record that is
excessively large. The full maximum payload size cannot be
constructed in that case.

Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSD: Protect against send buffer overflow in NFSv2 READ

commit 401bc1f90874280a80b93f23be33a0e7e2d1f912 upstream.

Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply at the same time.

Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.

A client can force this shrinkage on TCP by sending a correctly-
formed RPC Call header contained in an RPC record that is
excessively large. The full maximum payload size cannot be
constructed in that case.

Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSD: Protect against send buffer overflow in NFSv3 READDIR

commit 640f87c190e0d1b2a0fcb2ecf6d2cd53b1c41991 upstream.

Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply message at the same time.

Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC record containing the RPC
Call is large.

A client can force this shrinkage on TCP by sending a correctly-
formed RPC Call header contained in an RPC record that is
excessively large. The full maximum payload size cannot be
constructed in that case.

Thanks to Aleksi Illikainen and Kari Hulkko for uncovering this
issue.

Reported-by: Ben Ronallo <Benjamin.Ronallo@synopsys.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: Request full 16550A feature probing for OxSemi PCIe devices

commit 00b7a4d4ee42be1c515e56cb1e8ba0f25e271d8e upstream.

Oxford Semiconductor PCIe (Tornado) 950 serial port devices need to
operate in the enhanced mode via the EFR register for the Divide-by-M
N/8 baud rate generator prescaler to be used in their native UART mode.
Otherwise the prescaler is fixed at 1 causing grossly incorrect baud
rates to be programmed.

Accessing the EFR register requires 16550A features to have been probed
for, so request this to happen regardless of SERIAL_8250_16550A_VARIANTS
by setting UPF_FULL_PROBE in port flags.

Fixes: 366f6c955d4d ("serial: 8250: Add proper clock handling for OxSemi PCIe devices")
Cc: stable@vger.kernel.org # v5.19+
Reported-by: Anders Blomdell <anders.blomdell@control.lth.se>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209210005040.41633@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: Let drivers request full 16550A feature probing

commit 9906890c89e4dbd900ed87ad3040080339a7f411 upstream.

A SERIAL_8250_16550A_VARIANTS configuration option has been recently
defined that lets one request the 8250 driver not to probe for 16550A
device features so as to reduce the driver's device startup time in
virtual machines.

Some actual hardware devices require these features to have been fully
determined however for their driver to work correctly, so define a flag
to let drivers request full 16550A feature probing on a device-by-device
basis if required regardless of the SERIAL_8250_16550A_VARIANTS option
setting chosen.

Fixes: dc56ecb81a0a ("serial: 8250: Support disabling mdelay-filled probes of 16550A variants")
Cc: stable@vger.kernel.org # v5.6+
Reported-by: Anders Blomdell <anders.blomdell@control.lth.se>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209202357520.41633@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridge

commit 0e32818397426a688f598f35d3bc762eca6d7592 upstream.

When pci_assign_resource() is unable to assign resources to a BAR, it uses
pci_revert_fw_address() to fall back to a firmware assignment (if any).
Previously pci_revert_fw_address() assumed all addresses could reach the
device, but this is not true if the device is below a bridge that only
forwards addresses within its windows.

This problem was observed on a Tyan Tomcat IV S1564D system where the BIOS
did not assign valid addresses to several bridges and USB devices:

  pci 0000:00:11.0: PCI-to-PCIe bridge to [bus 01-ff]
  pci 0000:00:11.0:   bridge window [io  0xe000-0xefff]
  pci 0000:01:00.0: PCIe Upstream Port to [bus 02-ff]
  pci 0000:01:00.0:   bridge window [io  0x0000-0x0fff]   # unreachable
  pci 0000:02:02.0: PCIe Downstream Port to [bus 05-ff]
  pci 0000:02:02.0:   bridge window [io  0x0000-0x0fff]   # unreachable
  pci 0000:05:00.0: PCIe-to-PCI bridge to [bus 06-ff]
  pci 0000:05:00.0:   bridge window [io  0x0000-0x0fff]   # unreachable
  pci 0000:06:08.0: USB UHCI 1.1
  pci 0000:06:08.0: BAR 4: [io  0xfce0-0xfcff]            # unreachable
  pci 0000:06:08.1: USB UHCI 1.1
  pci 0000:06:08.1: BAR 4: [io  0xfce0-0xfcff]            # unreachable
  pci 0000:06:08.0: can't claim BAR 4 [io  0xfce0-0xfcff]: no compatible bridge window
  pci 0000:06:08.1: can't claim BAR 4 [io  0xfce0-0xfcff]: no compatible bridge window

During the first pass of assigning unassigned resources, there was not
enough I/O space available, so we couldn't assign the 06:08.0 BAR and
reverted to the firmware assignment (still unreachable).  Reverting the
06:08.1 assignment failed because it conflicted with 06:08.0:

  pci 0000:00:11.0:   bridge window [io  0xe000-0xefff]
  pci 0000:01:00.0: no space for bridge window [io  size 0x2000]
  pci 0000:02:02.0: no space for bridge window [io  size 0x1000]
  pci 0000:05:00.0: no space for bridge window [io  size 0x1000]
  pci 0000:06:08.0: BAR 4: no space for [io  size 0x0020]
  pci 0000:06:08.0: BAR 4: trying firmware assignment [io  0xfce0-0xfcff]
  pci 0000:06:08.1: BAR 4: no space for [io  size 0x0020]
  pci 0000:06:08.1: BAR 4: trying firmware assignment [io  0xfce0-0xfcff]
  pci 0000:06:08.1: BAR 4: [io  0xfce0-0xfcff] conflicts with 0000:06:08.0 [io  0xfce0-0xfcff]

A subsequent pass assigned valid bridge windows and a valid 06:08.1 BAR,
but left the 06:08.0 BAR alone, so the UHCI device was still unusable:

  pci 0000:00:11.0:   bridge window [io  0xe000-0xefff] released
  pci 0000:00:11.0:   bridge window [io  0x1000-0x2fff]   # reassigned
  pci 0000:01:00.0:   bridge window [io  0x1000-0x2fff]   # reassigned
  pci 0000:02:02.0:   bridge window [io  0x2000-0x2fff]   # reassigned
  pci 0000:05:00.0:   bridge window [io  0x2000-0x2fff]   # reassigned
  pci 0000:06:08.0: BAR 4: assigned [io  0xfce0-0xfcff]   # left alone
  pci 0000:06:08.1: BAR 4: assigned [io  0x2000-0x201f]
  ...
  uhci_hcd 0000:06:08.0: host system error, PCI problems?
  uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
  uhci_hcd 0000:06:08.0: host controller halted, very bad!
  uhci_hcd 0000:06:08.0: HCRESET not completed yet!
  uhci_hcd 0000:06:08.0: HC died; cleaning up

If the address assigned by firmware is not reachable because it's not
within upstream bridge windows, fail instead of assigning the unusable
address from firmware.

[bhelgaas: commit log, use pci_upstream_bridge()]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=16263
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203012338460.46819@angie.orcam.me.uk
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209211921250.29493@angie.orcam.me.uk
Fixes: 58c84eda0756 ("PCI: fall back to original BIOS BAR addresses")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v2.6.35+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/gntdev: Accommodate VMA splitting

commit 5c13a4a0291b30191eff9ead8d010e1ca43a4d0c upstream.

Prior to this commit, the gntdev driver code did not handle the
following scenario correctly with paravirtualized (PV) Xen domains:

* User process sets up a gntdev mapping composed of two grant mappings
  (i.e., two pages shared by another Xen domain).
* User process munmap()s one of the pages.
* User process munmap()s the remaining page.
* User process exits.

In the scenario above, the user process would cause the kernel to log
the following messages in dmesg for the first munmap(), and the second
munmap() call would result in similar log messages:

  BUG: Bad page map in process doublemap.test  pte:... pmd:...
  page:0000000057c97bff refcount:1 mapcount:-1 \
    mapping:0000000000000000 index:0x0 pfn:...
  ...
  page dumped because: bad pte
  ...
  file:gntdev fault:0x0 mmap:gntdev_mmap [xen_gntdev] readpage:0x0
  ...
  Call Trace:
   <TASK>
   dump_stack_lvl+0x46/0x5e
   print_bad_pte.cold+0x66/0xb6
   unmap_page_range+0x7e5/0xdc0
   unmap_vmas+0x78/0xf0
   unmap_region+0xa8/0x110
   __do_munmap+0x1ea/0x4e0
   __vm_munmap+0x75/0x120
   __x64_sys_munmap+0x28/0x40
   do_syscall_64+0x38/0x90
   entry_SYSCALL_64_after_hwframe+0x61/0xcb
   ...

For each munmap() call, the Xen hypervisor (if built with CONFIG_DEBUG)
would print out the following and trigger a general protection fault in
the affected Xen PV domain:

  (XEN) d0v... Attempt to implicitly unmap d0's grant PTE ...
  (XEN) d0v... Attempt to implicitly unmap d0's grant PTE ...

As of this writing, gntdev_grant_map structure's vma field (referred to
as map->vma below) is mainly used for checking the start and end
addresses of mappings. However, with split VMAs, these may change, and
there could be more than one VMA associated with a gntdev mapping.
Hence, remove the use of map->vma and rely on map->pages_vm_start for
the original start address and on (map->count << PAGE_SHIFT) for the
original mapping size. Let the invalidate() and find_special_page()
hooks use these.

Also, given that there can be multiple VMAs associated with a gntdev
mapping, move the "mmu_interval_notifier_remove(&map->notifier)" call to
the end of gntdev_put_map, so that the MMU notifier is only removed
after the closing of the last remaining VMA.

Finally, use an atomic to prevent inadvertent gntdev mapping re-use,
instead of using the map->live_grants atomic counter and/or the map->vma
pointer (the latter of which is now removed). This prevents the
userspace from mmap()'ing (with MAP_FIXED) a gntdev mapping over the
same address range as a previously set up gntdev mapping. This scenario
can be summarized with the following call-trace, which was valid prior
to this commit:

  mmap
    gntdev_mmap
  mmap (repeat mmap with MAP_FIXED over the same address range)
    gntdev_invalidate
      unmap_grant_pages (sets 'being_removed' entries to true)
        gnttab_unmap_refs_async
    unmap_single_vma
    gntdev_mmap (maps the shared pages again)
  munmap
    gntdev_invalidate
      unmap_grant_pages
        (no-op because 'being_removed' entries are true)
    unmap_single_vma (For PV domains, Xen reports that a granted page
      is being unmapped and triggers a general protection fault in the
      affected domain, if Xen was built with CONFIG_DEBUG)

The fix for this last scenario could be worth its own commit, but we
opted for a single commit, because removing the gntdev_grant_map
structure's vma field requires guarding the entry to gntdev_mmap(), and
the live_grants atomic counter is not sufficient on its own to prevent
the mmap() over a pre-existing mapping.

Link: https://github.com/QubesOS/qubes-issues/issues/7631
Fixes: ab31523c2fca ("xen/gntdev: allow usermode to map granted pages")
Cc: stable@vger.kernel.org
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221002222006.2077-3-m.v.b@runbox.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/gntdev: Prevent leaking grants

commit 0991028cd49567d7016d1b224fe0117c35059f86 upstream.

Prior to this commit, if a grant mapping operation failed partially,
some of the entries in the map_ops array would be invalid, whereas all
of the entries in the kmap_ops array would be valid. This in turn would
cause the following logic in gntdev_map_grant_pages to become invalid:

  for (i = 0; i < map->count; i++) {
    if (map->map_ops[i].status == GNTST_okay) {
      map->unmap_ops[i].handle = map->map_ops[i].handle;
      if (!use_ptemod)
        alloced++;
    }
    if (use_ptemod) {
      if (map->kmap_ops[i].status == GNTST_okay) {
        if (map->map_ops[i].status == GNTST_okay)
          alloced++;
        map->kunmap_ops[i].handle = map->kmap_ops[i].handle;
      }
    }
  }
  ...
  atomic_add(alloced, &map->live_grants);

Assume that use_ptemod is true (i.e., the domain mapping the granted
pages is a paravirtualized domain). In the code excerpt above, note that
the "alloced" variable is only incremented when both kmap_ops[i].status
and map_ops[i].status are set to GNTST_okay (i.e., both mapping
operations are successful).  However, as also noted above, there are
cases where a grant mapping operation fails partially, breaking the
assumption of the code excerpt above.

The aforementioned causes map->live_grants to be incorrectly set. In
some cases, all of the map_ops mappings fail, but all of the kmap_ops
mappings succeed, meaning that live_grants may remain zero. This in turn
makes it impossible to unmap the successfully grant-mapped pages pointed
to by kmap_ops, because unmap_grant_pages has the following snippet of
code at its beginning:

  if (atomic_read(&map->live_grants) == 0)
    return; /* Nothing to do */

In other cases where only some of the map_ops mappings fail but all
kmap_ops mappings succeed, live_grants is made positive, but when the
user requests unmapping the grant-mapped pages, __unmap_grant_pages_done
will then make map->live_grants negative, because the latter function
does not check if all of the pages that were requested to be unmapped
were actually unmapped, and the same function unconditionally subtracts
"data->count" (i.e., a value that can be greater than map->live_grants)
from map->live_grants. The side effects of a negative live_grants value
have not been studied.

The net effect of all of this is that grant references are leaked in one
of the above conditions. In Qubes OS v4.1 (which uses Xen's grant
mechanism extensively for X11 GUI isolation), this issue manifests
itself with warning messages like the following to be printed out by the
Linux kernel in the VM that had granted pages (that contain X11 GUI
window data) to dom0: "g.e. 0x1234 still pending", especially after the
user rapidly resizes GUI VM windows (causing some grant-mapping
operations to partially or completely fail, due to the fact that the VM
unshares some of the pages as part of the window resizing, making the
pages impossible to grant-map from dom0).

The fix for this issue involves counting all successful map_ops and
kmap_ops mappings separately, and then adding the sum to live_grants.
During unmapping, only the number of successfully unmapped grants is
subtracted from live_grants. The code is also modified to check for
negative live_grants values after the subtraction and warn the user.

Link: https://github.com/QubesOS/qubes-issues/issues/7631
Fixes: dbe97cff7dd9 ("xen/gntdev: Avoid blocking in unmap_grant_pages()")
Cc: stable@vger.kernel.org
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Acked-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221002222006.2077-2-m.v.b@runbox.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/mmap: undo ->mmap() when arch_validate_flags() fails

commit deb0f6562884b5b4beb883d73e66a7d3a1b96d99 upstream.

Commit c462ac288f2c ("mm: Introduce arch_validate_flags()") added a late
check in mmap_region() to let architectures validate vm_flags.  The check
needs to happen after calling ->mmap() as the flags can potentially be
modified during this callback.

If arch_validate_flags() check fails we unmap and free the vma.  However,
the error path fails to undo the ->mmap() call that previously succeeded
and depending on the specific ->mmap() implementation this translates to
reference increments, memory allocations and other operations what will
not be cleaned up.

There are several places (mainly device drivers) where this is an issue.
However, one specific example is bpf_map_mmap() which keeps count of the
mappings in map->writecnt.  The count is incremented on ->mmap() and then
decremented on vm_ops->close().  When arch_validate_flags() fails this
count is off since bpf_map_mmap_close() is never called.

One can reproduce this issue in arm64 devices with MTE support.  Here the
vm_flags are checked to only allow VM_MTE if VM_MTE_ALLOWED has been set
previously.  From userspace then is enough to pass the PROT_MTE flag to
mmap() syscall to trigger the arch_validate_flags() failure.

The following program reproduces this issue:

  #include <stdio.h>
  #include <unistd.h>
  #include <linux/unistd.h>
  #include <linux/bpf.h>
  #include <sys/mman.h>

  int main(void)
  {
union bpf_attr attr = {
.map_type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(long long),
.max_entries = 256,
.map_flags = BPF_F_MMAPABLE,
};
int fd;

fd = syscall(__NR_bpf, BPF_MAP_CREATE, &attr, sizeof(attr));
mmap(NULL, 4096, PROT_WRITE | PROT_MTE, MAP_SHARED, fd, 0);

return 0;
  }

By manually adding some log statements to the vm_ops callbacks we can
confirm that when passing PROT_MTE to mmap() the map->writecnt is off upon
->release():

With PROT_MTE flag:
  root@debian:~# ./bpf-test
  [  111.263874] bpf_map_write_active_inc: map=9 writecnt=1
  [  111.288763] bpf_map_release: map=9 writecnt=1

Without PROT_MTE flag:
  root@debian:~# ./bpf-test
  [  157.816912] bpf_map_write_active_inc: map=10 writecnt=1
  [  157.830442] bpf_map_write_active_dec: map=10 writecnt=0
  [  157.832396] bpf_map_release: map=10 writecnt=0

This patch fixes the above issue by calling vm_ops->close() when the
arch_validate_flags() check fails, after this we can proceed to unmap and
free the vma on the error path.

Link: https://lkml.kernel.org/r/20220930003844.1210987-1-cmllamas@google.com
Fixes: c462ac288f2c ("mm: Introduce arch_validate_flags()")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Liam Howlett <liam.howlett@oracle.com>
Cc: Christian Brauner (Microsoft) <brauner@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org> [5.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/damon: validate if the pmd entry is present before accessing

commit c8b9aff419303e4d4219b5ff64b1c7e062dee48e upstream.

pmd_huge() is used to validate if the pmd entry is mapped by a huge page,
also including the case of non-present (migration or hwpoisoned) pmd entry
on arm64 or x86 architectures.  This means that pmd_pfn() can not get the
correct pfn number for a non-present pmd entry, which will cause
damon_get_page() to get an incorrect page struct (also may be NULL by
pfn_to_online_page()), making the access statistics incorrect.

This means that the DAMON may make incorrect decision according to the
incorrect statistics, for example, DAMON may can not reclaim cold page
in time due to this cold page was regarded as accessed mistakenly if
DAMOS_PAGEOUT operation is specified.

Moreover it does not make sense that we still waste time to get the page
of the non-present entry.  Just treat it as not-accessed and skip it,
which maintains consistency with non-present pte level entries.

So add pmd entry present validation to fix the above issues.

Link: https://lkml.kernel.org/r/58b1d1f5fbda7db49ca886d9ef6783e3dcbbbc98.1660805030.git.baolin.wang@linux.alibaba.com
Fixes: 3f49584b262c ("mm/damon: implement primitives for the virtual memory address spaces")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: errata: Add Cortex-A55 to the repeat tlbi list

commit 171df58028bf4649460fb146a56a58dcb0c8f75a upstream.

Cortex-A55 is affected by an erratum where in rare circumstances the
CPUs may not handle a race between a break-before-make sequence on one
CPU, and another CPU accessing the same page. This could allow a store
to a page that has been unmapped.

Work around this by adding the affected CPUs to the list that needs
TLB sequences to be done twice.

Signed-off-by: James Morse <james.morse@arm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220930131959.3082594-1-james.morse@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/udl: Restore display mode on resume

commit 6d6e732835db92e66c28dbcf258a7e3d3c71420d upstream.

Restore the display mode whne resuming from suspend. Currently, the
display remains dark.

On resume, the CRTC's mode does not change, but the 'active' flag
changes to 'true'. Taking this into account when considering a mode
switch restores the display mode.

The bug is reproducable by using Gnome with udl and observing the
adapter's suspend/resume behavior.

Actually, the whole check added in udl_simple_display_pipe_enable()
about the crtc_state->mode_changed was bogus.  We should drop the
whole check and always apply the mode change in this function.

[ tiwai -- Drop the mode_changed check entirely instead, per Daniel's
  suggestion ]

Fixes: 997d33c35618 ("drm/udl: Inline DPMS code into CRTC enable and disable functions")
Cc: <stable@vger.kernel.org>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-2-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/virtio: Use appropriate atomic state in virtio_gpu_plane_cleanup_fb()

commit 4656b3a26a9e9fe5f04bfd2ab55b066266ba7f4d upstream.

Make virtio_gpu_plane_cleanup_fb() to clean the state which DRM core
wants to clean up and not the current plane's state. Normally the older
atomic state is cleaned up, but the newer state could also be cleaned up
in case of aborted commits.

Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220630200726.1884320-6-dmitry.osipenko@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/virtio: Unlock reservations on virtio_gpu_object_shmem_init() error

commit fdf0ff4d12cbcd76b53f27c96ce51ddca400884a upstream.

Unlock reservations in the error code path of virtio_gpu_object_create()
to silence debug warning splat produced by ww_mutex_destroy(&obj->lock)
when GEM is released with the held lock.

Cc: stable@vger.kernel.org
Fixes: 30172efbfb84 ("drm/virtio: blob prep: refactor getting pages and attaching backing")
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220630200726.1884320-4-dmitry.osipenko@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/virtio: Check whether transferred 2D BO is shmem

commit e473216b42aa1fd9fc6b94b608b42c210c655908 upstream.

Transferred 2D BO always must be a shmem BO. Add check for that to prevent
NULL dereference if userspace passes a VRAM BO.

Cc: stable@vger.kernel.org
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220630200726.1884320-3-dmitry.osipenko@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: mxs: use platform_driver_register

commit 26696d4657167112a1079f86cba1739765c1360e upstream.

Driver registration fails on SOC imx8mn as its supplier, the clock
control module, is probed later than subsys initcall level. This driver
uses platform_driver_probe which is not compatible with deferred probing
and won't be probed again later if probe function fails due to clock not
being available at that time.

This patch replaces the use of platform_driver_probe with
platform_driver_register which will allow probing the driver later again
when the clock control module will be available.

The __init annotation has been dropped because it is not compatible with
deferred probing. The code is not executed once and its memory cannot be
freed.

Fixes: a580b8c5429a ("dmaengine: mxs-dma: add dma support for i.MX23/28")
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220921170556.1055962-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Revert "drm/amdgpu: use dirty framebuffer helper"

commit 17d819e2828cacca2e4c909044eb9798ed379cd2 upstream.

This reverts commit 66f99628eb24409cb8feb5061f78283c8b65f820.

Unfortunately, that commit causes performance regressions on non-PSR
setups. So, just revert it until FB_DAMAGE_CLIPS support can be added.

Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2189
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216554
Fixes: 66f99628eb2440 ("drm/amdgpu: use dirty framebuffer helper")
Fixes: abbc7a3dafb91b ("drm/amdgpu: don't register a dirty callback for non-atomic")
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-pci: set min_align_mask before calculating max_hw_sectors

commit 61ce339f19fabbc3e51237148a7ef6f2270e44fa upstream.

If swiotlb is force enabled dma_max_mapping_size ends up calling
swiotlb_max_mapping_size which takes into account the min align mask for
the device.  Set the min align mask for nvme driver before calling
dma_max_mapping_size while calculating max hw sectors.

Signed-off-by: Rishabh Bhatnagar <risbhat@amazon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-multipath: fix possible hang in live ns resize with ANA access

commit 72e3b8883a36e80ebfa41015c7b6926ce31ace05 upstream.

When we revalidate paths as part of ns size change (as of commit
e7d65803e2bb), it is possible that during the path revalidation, the
only paths that is IO capable (i.e. optimized/non-optimized) are the
ones that ns resize was not yet informed to the host, which will cause
inflight requests to be requeued (as we have available paths but none
are IO capable). These requests on the requeue list are waiting for
someone to resubmit them at some point.

The IO capable paths will eventually notify the ns resize change to the
host, but there is nothing that will kick the requeue list to resubmit
the queued requests.

Fix this by always kicking the requeue list, and if no IO capable path
exists, these requests will be queued again.

A typical log that indicates that IOs are requeued:
--
nvme nvme1: creating 4 I/O queues.
nvme nvme1: new ctrl: "testnqn1"
nvme nvme2: creating 4 I/O queues.
nvme nvme2: mapped 4/0/0 default/read/poll queues.
nvme nvme2: new ctrl: NQN "testnqn1", addr 127.0.0.1:8009
nvme nvme1: rescanning namespaces.
nvme1n1: detected capacity change from 2097152 to 4194304
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
nvme nvme2: rescanning namespaces.
--

Reported-by: Yogev Cohen <yogev@lightbitslabs.com>
Fixes: e7d65803e2bb ("nvme-multipath: revalidate paths during rescan")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: core: Fix memleak in nvmem_register()

commit bd1244561fa2a4531ded40dbf09c9599084f8b29 upstream.

dev_set_name will alloc memory for nvmem->dev.kobj.name in
nvmem_register, when nvmem_validate_keepouts failed, nvmem's
memory will be freed and return, but nobody will free memory
for nvmem->dev.kobj.name, there will be memleak, so moving
nvmem_validate_keepouts() after device_register() and let
the device core deal with cleaning name in error cases.

Fixes: de0534df9347 ("nvmem: core: fix error handling while validating keepout regions")
Cc: stable@vger.kernel.org
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916120402.38753-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UM: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK

commit 16c546e148fa6d14a019431436a6f7b4087dbccd upstream.

When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS is selected,
cpu_max_bits_warn() generates a runtime warning similar as below while
we show /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit)
instead of NR_CPUS to iterate CPUs.

[    3.052463] ------------[ cut here ]------------
[    3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0
[    3.070072] Modules linked in: efivarfs autofs4
[    3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052
[    3.099465] Stack : 9000000100157b08 9000000000f18530 9000000000cf846c 9000000100154000
[    3.109127]         9000000100157a50 0000000000000000 9000000100157a58 9000000000ef7430
[    3.118774]         90000001001578e8 0000000000000040 0000000000000020 ffffffffffffffff
[    3.128412]         0000000000aaaaaa 1ab25f00eec96a37 900000010021de80 900000000101c890
[    3.138056]         0000000000000000 0000000000000000 0000000000000000 0000000000aaaaaa
[    3.147711]         ffff8000339dc220 0000000000000001 0000000006ab4000 0000000000000000
[    3.157364]         900000000101c998 0000000000000004 9000000000ef7430 0000000000000000
[    3.167012]         0000000000000009 000000000000006c 0000000000000000 0000000000000000
[    3.176641]         9000000000d3de08 9000000001639390 90000000002086d8 00007ffff0080286
[    3.186260]         00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c
[    3.195868]         ...
[    3.199917] Call Trace:
[    3.203941] [<90000000002086d8>] show_stack+0x38/0x14c
[    3.210666] [<9000000000cf846c>] dump_stack_lvl+0x60/0x88
[    3.217625] [<900000000023d268>] __warn+0xd0/0x100
[    3.223958] [<9000000000cf3c90>] warn_slowpath_fmt+0x7c/0xcc
[    3.231150] [<9000000000210220>] show_cpuinfo+0x5e8/0x5f0
[    3.238080] [<90000000004f578c>] seq_read_iter+0x354/0x4b4
[    3.245098] [<90000000004c2e90>] new_sync_read+0x17c/0x1c4
[    3.252114] [<90000000004c5174>] vfs_read+0x138/0x1d0
[    3.258694] [<90000000004c55f8>] ksys_read+0x70/0x100
[    3.265265] [<9000000000cfde9c>] do_syscall+0x7c/0x94
[    3.271820] [<9000000000202fe4>] handle_syscall+0xc4/0x160
[    3.281824] ---[ end trace 8b484262b4b8c24c ]---

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Pass -mno-relax only on lld < 15.0.0

commit 3cebf80e9a0d3adcb174053be32c88a640b3344b upstream.

lld since llvm:6611d58f5bbc ("[ELF] Relax R_RISCV_ALIGN"), which will be
included in the 15.0.0 release, has implemented some RISC-V linker
relaxation.  -mno-relax is no longer needed in
KBUILD_CFLAGS/KBUILD_AFLAGS to suppress R_RISCV_ALIGN which older lld
can not handle:

    ld.lld: error: capability.c:(.fixup+0x0): relocation R_RISCV_ALIGN
    requires unimplemented linker relaxation; recompile with -mno-relax
    but the .o is already compiled with -mno-relax

Signed-off-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20220710071117.446112-1-maskray@google.com/
Link: https://lore.kernel.org/r/20220918092933.19943-1-palmer@rivosinc.com
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: always honor the CONFIG_CMDLINE_FORCE when parsing dtb

commit 10f6913c548b32ecb73801a16b120e761c6957ea upstream.

When CONFIG_CMDLINE_FORCE is enabled, cmdline provided by
CONFIG_CMDLINE are always used. This allows CONFIG_CMDLINE to be
used regardless of the result of device tree scanning.

This especially fixes the case where a device tree without the
chosen node is supplied to the kernel. In such cases,
early_init_dt_scan would return true. But inside
early_init_dt_scan_chosen, the cmdline won't be updated as there
is no chosen node in the device tree. As a result, CONFIG_CMDLINE
is not copied into boot_command_line even if CONFIG_CMDLINE_FORCE
is enabled. This commit allows properly update boot_command_line
in this situation.

Fixes: 8fd6e05c7463 ("arch: riscv: support kernel command line forcing when no DTB passed")
Signed-off-by: Wenting Zhang <zephray@outlook.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/PSBPR04MB399135DFC54928AB958D0638B1829@PSBPR04MB3991.apcprd04.prod.outlook.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Make VM_WRITE imply VM_READ

commit 7ab72c597356be1e7f0f3d856e54ce78527f43c8 upstream.

RISC-V does not presently have write-only mappings as that PTE bit pattern
is considered reserved in the privileged spec, so allow handling of read
faults in VMAs that have VM_WRITE without VM_READ in order to be consistent
with other architectures that have similar limitations.

Fixes: 2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is invalid")
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220915193702.2201018-2-abrestic@rivosinc.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Allow PROT_WRITE-only mmap()

commit 9e2e6042a7ec6504fe8e366717afa2f40cf16488 upstream.

Commit 2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is
invalid") made mmap() return EINVAL if PROT_WRITE was set wihtout
PROT_READ with the justification that a write-only PTE is considered a
reserved PTE permission bit pattern in the privileged spec. This check
is unnecessary since we let VM_WRITE imply VM_READ on RISC-V, and it is
inconsistent with other architectures that don't support write-only PTEs,
creating a potential software portability issue. Just remove the check
altogether and let PROT_WRITE imply PROT_READ as is the case on other
architectures.

Note that this also allows PROT_WRITE|PROT_EXEC mappings which were
disallowed prior to the aforementioned commit; PROT_READ is implied in
such mappings as well.

Fixes: 2139619bcad7 ("riscv: mmap with PROT_WRITE but no PROT_READ is invalid")
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220915193702.2201018-3-abrestic@rivosinc.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: fbdev/stifb: Align graphics memory size to 4MB

commit aca7c13d3bee81a968337a5515411409ae9d095d upstream.

Independend of the current graphics resolution, adjust the reported
graphics card memory size to the next 4MB boundary.
This fixes the fbtest program which expects a naturally aligned size.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RISC-V: Make port I/O string accessors actually work

commit 9cc205e3c17d5716da7ebb7fa0c985555e95d009 upstream.

Fix port I/O string accessors such as `insb', `outsb', etc. which use
the physical PCI port I/O address rather than the corresponding memory
mapping to get at the requested location, which in turn breaks at least
accesses made by our parport driver to a PCIe parallel port such as:

PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20
parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]

causing a memory access fault:

Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000001008
Oops [#1]
Modules linked in:
CPU: 1 PID: 350 Comm: cat Not tainted 6.0.0-rc2-00283-g10d4879f9ef0-dirty #23
Hardware name: SiFive HiFive Unmatched A00 (DT)
epc : parport_pc_fifo_write_block_pio+0x266/0x416
 ra : parport_pc_fifo_write_block_pio+0xb4/0x416
epc : ffffffff80542c3e ra : ffffffff80542a8c sp : ffffffd88899fc60
 gp : ffffffff80fa2700 tp : ffffffd882b1e900 t0 : ffffffd883d0b000
 t1 : ffffffffff000002 t2 : 4646393043330a38 s0 : ffffffd88899fcf0
 s1 : 0000000000001000 a0 : 0000000000000010 a1 : 0000000000000000
 a2 : ffffffd883d0a010 a3 : 0000000000000023 a4 : 00000000ffff8fbb
 a5 : ffffffd883d0a001 a6 : 0000000100000000 a7 : ffffffc800000000
 s2 : ffffffffff000002 s3 : ffffffff80d28880 s4 : ffffffff80fa1f50
 s5 : 0000000000001008 s6 : 0000000000000008 s7 : ffffffd883d0a000
 s8 : 0004000000000000 s9 : ffffffff80dc1d80 s10: ffffffd8807e4000
 s11: 0000000000000000 t3 : 00000000000000ff t4 : 393044410a303930
 t5 : 0000000000001000 t6 : 0000000000040000
status: 0000000200000120 badaddr: 0000000000001008 cause: 000000000000000f
[<ffffffff80543212>] parport_pc_compat_write_block_pio+0xfe/0x200
[<ffffffff8053bbc0>] parport_write+0x46/0xf8
[<ffffffff8050530e>] lp_write+0x158/0x2d2
[<ffffffff80185716>] vfs_write+0x8e/0x2c2
[<ffffffff80185a74>] ksys_write+0x52/0xc2
[<ffffffff80185af2>] sys_write+0xe/0x16
[<ffffffff80003770>] ret_from_syscall+0x0/0x2
---[ end trace 0000000000000000 ]---

For simplicity address the problem by adding PCI_IOBASE to the physical
address requested in the respective wrapper macros only, observing that
the raw accessors such as `__insb', `__outsb', etc. are not supposed to
be used other than by said macros.  Remove the cast to `long' that is no
longer needed on `addr' now that it is used as an offset from PCI_IOBASE
and add parentheses around `addr' needed for predictable evaluation in
macro expansion.  No need to make said adjustments in separate changes
given that current code is gravely broken and does not ever work.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: fab957c11efe2 ("RISC-V: Atomic and Locking Code")
Cc: stable@vger.kernel.org # v4.15+
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209220223080.29493@angie.orcam.me.uk
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: topology: fix default topology reporting

commit fbd92809997a391f28075f1c8b5ee314c225557c upstream.

RISC-V has no sane defaults to fall back on where there is no cpu-map
in the devicetree.
Without sane defaults, the package, core and thread IDs are all set to
-1. This causes user-visible inaccuracies for tools like hwloc/lstopo
which rely on the sysfs cpu topology files to detect a system's
topology.

On a PolarFire SoC, which should have 4 harts with a thread each,
lstopo currently reports:

Machine (793MB total)
  Package L#0
    NUMANode L#0 (P#0 793MB)
    Core L#0
      L1d L#0 (32KB) + L1i L#0 (32KB) + PU L#0 (P#0)
      L1d L#1 (32KB) + L1i L#1 (32KB) + PU L#1 (P#1)
      L1d L#2 (32KB) + L1i L#2 (32KB) + PU L#2 (P#2)
      L1d L#3 (32KB) + L1i L#3 (32KB) + PU L#3 (P#3)

Adding calls to store_cpu_topology() in {boot,smp} hart bringup code
results in the correct topolgy being reported:

Machine (793MB total)
  Package L#0
    NUMANode L#0 (P#0 793MB)
    L1d L#0 (32KB) + L1i L#0 (32KB) + Core L#0 + PU L#0 (P#0)
    L1d L#1 (32KB) + L1i L#1 (32KB) + Core L#1 + PU L#1 (P#1)
    L1d L#2 (32KB) + L1i L#2 (32KB) + Core L#2 + PU L#2 (P#2)
    L1d L#3 (32KB) + L1i L#3 (32KB) + Core L#3 + PU L#3 (P#3)

CC: stable@vger.kernel.org # 456797da792f: arm64: topology: move store_cpu_topology() to shared code
Fixes: 03f11f03dbfe ("RISC-V: Parse cpu topology during boot.")
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Link: https://github.com/open-mpi/hwloc/issues/536
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: topology: move store_cpu_topology() to shared code

commit 456797da792fa7cbf6698febf275fe9b36691f78 upstream.

arm64's method of defining a default cpu topology requires only minimal
changes to apply to RISC-V also. The current arm64 implementation exits
early in a uniprocessor configuration by reading MPIDR & claiming that
uniprocessor can rely on the default values.

This is appears to be a hangover from prior to '3102bc0e6ac7 ("arm64:
topology: Stop using MPIDR for topology information")', because the
current code just assigns default values for multiprocessor systems.

With the MPIDR references removed, store_cpu_topolgy() can be moved to
the common arch_topology code.

Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: qcom_rpm: Fix circular deferral regression

commit 8478ed5844588703a1a4c96a004b1525fbdbdd5e upstream.

On recent kernels, the PM8058 L16 (or any other PM8058 LDO-regulator)
does not come up if they are supplied by an SMPS-regulator. This
is not very strange since the regulators are registered in a long
array and the L-regulators are registered before the S-regulators,
and if an L-regulator defers, it will never get around to registering
the S-regulator that it needs.

See arch/arm/boot/dts/qcom-apq8060-dragonboard.dts:

pm8058-regulators {
    (...)
    vdd_l13_l16-supply = <&pm8058_s4>;
    (...)

Ooops.

Fix this by moving the PM8058 S-regulators first in the array.

Do the same for the PM8901 S-regulators (though this is currently
not causing any problems with out device trees) so that the pattern
of registration order is the same on all PMnnnn chips.

Fixes: 087a1b5cdd55 ("regulator: qcom: Rework to single platform device")
Cc: stable@vger.kernel.org
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220909112529.239143-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: thunderbolt: Enable DMA paths only after rings are enabled

commit ff7cd07f306406493f7b78890475e85b6d0811ed upstream.

If the other host starts sending packets early on it is possible that we
are still in the middle of populating the initial Rx ring packets to the
ring. This causes the tbnet_poll() to mess over the queue and causes
list corruption. This happens specifically when connected with macOS as
it seems start sending various IP discovery packets as soon as its side
of the paths are configured.

To prevent this we move the DMA path enabling to happen after we have
primed the Rx ring. This makes sure no incoming packets can arrive
before we are ready to handle them.

Fixes: e69b6c02b4c3 ("net: Add support for networking over Thunderbolt cable")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (gsc-hwmon) Call of_node_get() before of_find_xxx API

commit 7f62cf781e6567d59c8935dc8c6068ce2bb904b7 upstream.

In gsc_hwmon_get_devtree_pdata(), we should call of_node_get() before
the of_find_compatible_node() which will automatically call
of_node_put() for the 'from' argument.

Fixes: 3bce5377ef66 ("hwmon: Add Gateworks System Controller support")
Signed-off-by: Liang He <windhl@126.com>
Co-developed-by: Mengda Chen <chenmengda2009@163.com>
Signed-off-by: Mengda Chen <chenmengda2009@163.com>
Link: https://lore.kernel.org/r/20220916154708.3084515-1-chenmengda2009@163.com
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wcd934x: fix order of Slimbus unprepare/disable

commit e96bca7eaa5747633ec638b065630ff83728982a upstream.

Slimbus streams are first prepared and then enabled, so the cleanup path
should reverse it.  The unprepare sets stream->num_ports to 0 and frees
the stream->ports.  Calling disable after unprepare was not really
effective (channels was not deactivated) and could lead to further
issues due to making transfers on unprepared stream.

Fixes: a61f3b4f476e ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220921145354.1683791-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wcd9335: fix order of Slimbus unprepare/disable

commit ea8ef003aa53ad23e7705c5cab1c4e664faa6c79 upstream.

Slimbus streams are first prepared and then enabled, so the cleanup path
should reverse it.  The unprepare sets stream->num_ports to 0 and frees
the stream->ports.  Calling disable after unprepare was not really
effective (channels was not deactivated) and could lead to further
issues due to making transfers on unprepared stream.

Fixes: 20aedafdf492 ("ASoC: wcd9335: add support to wcd9335 codec")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220921145354.1683791-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/chrome: cros_ec_proto: Update version on GET_NEXT_EVENT failure

commit f74c7557ed0d321947e8bb4e9d47c1013f8b2227 upstream.

Some EC based devices (e.g. Fingerpint MCU) can jump to RO part of the
firmware (intentionally or due to device reboot). The RO part doesn't
change during the device lifecycle, so it won't support newer version
of EC_CMD_GET_NEXT_EVENT command.

Function cros_ec_query_all() is responsible for finding maximum
supported MKBP event version. It's usually called when the device is
running RW part of the firmware, so the command version can be
potentially higher than version supported by the RO.

The problem was fixed by updating maximum supported version when the
device returns EC_RES_INVALID_VERSION (mapped to -ENOPROTOOPT). That way
the kernel will use highest common version supported by RO and RW.

Fixes: 3300fdd630d4 ("platform/chrome: cros_ec: handle MKBP more events flag")
Cc: <stable@vger.kernel.org> # 5.10+
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220802154128.21175-1-pdk@semihalf.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

quota: Check next/prev free block number after reading from quota file

commit 6c8ea8b8cd4722efd419f91ca46a2dc81b7d89a3 upstream.

Following process:
 Init: v2_read_file_info: <3> dqi_free_blk 0 dqi_free_entry 5 dqi_blks 6

 Step 1. chown bin f_a -> dquot_acquire -> v2_write_dquot:
  qtree_write_dquot
   do_insert_tree
    find_free_dqentry
     get_free_dqblk
      write_blk(info->dqi_blocks) // info->dqi_blocks = 6, failure. The
   content in physical block (corresponding to blk 6) is random.

 Step 2. chown root f_a -> dquot_transfer -> dqput_all -> dqput ->
         ext4_release_dquot -> v2_release_dquot -> qtree_delete_dquot:
  dquot_release
   remove_tree
    free_dqentry
     put_free_dqblk(6)
      info->dqi_free_blk = blk    // info->dqi_free_blk = 6

 Step 3. drop cache (buffer head for block 6 is released)

 Step 4. chown bin f_b -> dquot_acquire -> commit_dqblk -> v2_write_dquot:
  qtree_write_dquot
   do_insert_tree
    find_free_dqentry
     get_free_dqblk
      dh = (struct qt_disk_dqdbheader *)buf
      blk = info->dqi_free_blk     // 6
      ret = read_blk(info, blk, buf)  // The content of buf is random
      info->dqi_free_blk = le32_to_cpu(dh->dqdh_next_free)  // random blk

 Step 5. chown bin f_c -> notify_change -> ext4_setattr -> dquot_transfer:
  dquot = dqget -> acquire_dquot -> ext4_acquire_dquot -> dquot_acquire ->
          commit_dqblk -> v2_write_dquot -> dq_insert_tree:
   do_insert_tree
    find_free_dqentry
     get_free_dqblk
      blk = info->dqi_free_blk    // If blk < 0 and blk is not an error
     code, it will be returned as dquot

  transfer_to[USRQUOTA] = dquot  // A random negative value
  __dquot_transfer(transfer_to)
   dquot_add_inodes(transfer_to[cnt])
    spin_lock(&dquot->dq_dqb_lock)  // page fault

, which will lead to kernel page fault:
 Quota error (device sda): qtree_write_dquot: Error -8000 occurred
 while creating quota
 BUG: unable to handle page fault for address: ffffffffffffe120
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0002) - not-present page
 Oops: 0002 [#1] PREEMPT SMP
 CPU: 0 PID: 5974 Comm: chown Not tainted 6.0.0-rc1-00004
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
 RIP: 0010:_raw_spin_lock+0x3a/0x90
 Call Trace:
  dquot_add_inodes+0x28/0x270
  __dquot_transfer+0x377/0x840
  dquot_transfer+0xde/0x540
  ext4_setattr+0x405/0x14d0
  notify_change+0x68e/0x9f0
  chown_common+0x300/0x430
  __x64_sys_fchownat+0x29/0x40

In order to avoid accessing invalid quota memory address, this patch adds
block number checking of next/prev free block read from quota file.

Fetch a reproducer in [Link].

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216372
Fixes: 1da177e4c3f4152 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220923134555.2623931-2-chengzhihao1@huawei.com
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: multitouch: Add memory barriers

commit be6e2b5734a425941fcdcdbd2a9337be498ce2cf upstream.

This fixes broken atomic checks which cause a race between the
release-timer and processing of hid input.

I noticed that contacts were sometimes sticking, even with the "sticky
fingers" quirk enabled. This fixes that problem.

Cc: stable@vger.kernel.org
Fixes: 9609827458c3 ("HID: multitouch: optimize the sticky fingers timer")
Signed-off-by: Andri Yngvason <andri@yngvason.is>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220907150159.2285460-1-andri@yngvason.is
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: dlm: handle -EBUSY first in lock arg validation

commit 44637ca41d551d409a481117b07fa209b330fca9 upstream.

During lock arg validation, first check for -EBUSY cases, then for
-EINVAL cases. The -EINVAL checks look at lkb state variables
which are not stable when an lkb is busy and would cause an
-EBUSY result, e.g. lkb->lkb_grmode.

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: dlm: fix race between test_bit() and queue_work()

commit eef6ec9bf390e836a6c4029f3620fe49528aa1fe upstream.

This patch fixes a race by using ls_cb_mutex around the bit
operations and conditional code blocks for LSFL_CB_DELAY.

The function dlm_callback_stop() expects to stop all callbacks and
flush all currently queued onces. The set_bit() is not enough because
there can still be queue_work() after the workqueue was flushed.
To avoid queue_work() after set_bit(), surround both by ls_cb_mutex.

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: designware: Fix handling of real but unexpected device interrupts

commit 301c8f5c32c8fb79c67539bc23972dc3ef48024c upstream.

Commit c7b79a752871 ("mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI
IDs") caused a regression on certain Gigabyte motherboards for Intel
Alder Lake-S where system crashes to NULL pointer dereference in
i2c_dw_xfer_msg() when system resumes from S3 sleep state ("deep").

I was able to debug the issue on Gigabyte Z690 AORUS ELITE and made
following notes:

- Issue happens when resuming from S3 but not when resuming from
  "s2idle"
- PCI device 00:15.0 == i2c_designware.0 is already in D0 state when
  system enters into pci_pm_resume_noirq() while all other i2c_designware
  PCI devices are in D3. Devices were runtime suspended and in D3 prior
  entering into suspend
- Interrupt comes after pci_pm_resume_noirq() when device interrupts are
  re-enabled
- According to register dump the interrupt really comes from the
  i2c_designware.0. Controller is enabled, I2C target address register
  points to a one detectable I2C device address 0x60 and the
  DW_IC_RAW_INTR_STAT register START_DET, STOP_DET, ACTIVITY and
  TX_EMPTY bits are set indicating completed I2C transaction.

My guess is that the firmware uses this controller to communicate with
an on-board I2C device during resume but does not disable the controller
before giving control to an operating system.

I was told the UEFI update fixes this but never the less it revealed the
driver is not ready to handle TX_EMPTY (or RX_FULL) interrupt when device
is supposed to be idle and state variables are not set (especially the
dev->msgs pointer which may point to NULL or stale old data).

Introduce a new software status flag STATUS_ACTIVE indicating when the
controller is active in driver point of view. Now treat all interrupts
that occur when is not set as unexpected and mask all interrupts from
the controller.

Fixes: c7b79a752871 ("mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI IDs")
Reported-by: Samuel Clark <slc2015@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215907
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-sprd: Fix minimum clock limit

commit 6e141772e6465f937458b35ddcfd0a981b6f5280 upstream.

The Spreadtrum controller supports 100KHz minimal clock rate, which means
that the current value 400KHz is wrong.

Unfortunately this has also lead to fail to initialize some cards, which
are allowed to require 100KHz to work. So, let's fix the problem by
changing the minimal supported clock rate to 100KHz.

Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221011104935.10980-1-wenchao.chen666@gmail.com
[Ulf: Clarified to commit-message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb_leaf: Fix CAN state after restart

commit 0be1a655fe68c8e6dcadbcbddb69cf2fb29881f5 upstream.

can_restart() expects CMD_START_CHIP to set the error state to
ERROR_ACTIVE as it calls netif_carrier_on() immediately afterwards.

Otherwise the user may immediately trigger restart again and hit a
BUG_ON() in can_restart().

Fix kvaser_usb_leaf set_mode(CMD_START_CHIP) to set the expected state.

Cc: stable@vger.kernel.org
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-5-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb_leaf: Fix TX queue out of sync after restart

commit 455561fb618fde40558776b5b8435f9420f335db upstream.

The TX queue seems to be implicitly flushed by the hardware during
bus-off or bus-off recovery, but the driver does not reset the TX
bookkeeping.

Despite not resetting TX bookkeeping the driver still re-enables TX
queue unconditionally, leading to "cannot find free context" /
NETDEV_TX_BUSY errors if the TX queue was full at bus-off time.

Fix that by resetting TX bookkeeping on CAN restart.

Tested with 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778.

Cc: stable@vger.kernel.org
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-4-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb_leaf: Fix overread with an invalid command

commit 1499ecaea9d2ba68d5e18d80573b4561a8dc4ee7 upstream.

For command events read from the device,
kvaser_usb_leaf_read_bulk_callback() verifies that cmd->len does not
exceed the size of the received data, but the actual kvaser_cmd handlers
will happily read any kvaser_cmd fields without checking for cmd->len.

This can cause an overread if the last cmd in the buffer is shorter than
expected for the command type (with cmd->len showing the actual short
size).

Maximum overread seems to be 22 bytes (CMD_LEAF_LOG_MESSAGE), some of
which are delivered to userspace as-is.

Fix that by verifying the length of command before handling it.

This issue can only occur after RX URBs have been set up, i.e. the
interface has been opened at least once.

Cc: stable@vger.kernel.org
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-2-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb: Fix use of uninitialized completion

commit cd7f30e174d09a02ca2afa5ef093fb0f0352e0d8 upstream.

flush_comp is initialized when CMD_FLUSH_QUEUE is sent to the device and
completed when the device sends CMD_FLUSH_QUEUE_RESP.

This causes completion of uninitialized completion if the device sends
CMD_FLUSH_QUEUE_RESP before CMD_FLUSH_QUEUE is ever sent (e.g. as a
response to a flush by a previously bound driver, or a misbehaving
device).

Fix that by initializing flush_comp in kvaser_usb_init_one() like the
other completions.

This issue is only triggerable after RX URBs have been set up, i.e. the
interface has been opened at least once.

Cc: stable@vger.kernel.org
Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010150829.199676-3-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: add quirks for Lenovo OneLink+ Dock

commit 37d49519b41405b08748392c6a7f193d9f77ecd2 upstream.

The Lenovo OneLink+ Dock contains two VL812 USB3.0 controllers:
17ef:1018 upstream
17ef:1019 downstream

These hubs suffer from two separate problems:

1) After the host system was suspended and woken up, the hubs appear to
   be in a random state. Some downstream ports (both internal to the
   built-in audio and network controllers, and external to USB sockets)
   may no longer be functional. The exact list of disabled ports (if
   any) changes from wakeup to wakeup. Ports remain in that state until
   the dock is power-cycled, or until the laptop is rebooted.

   Wakeup sources connected to the hubs (keyboard, WoL on the integrated
   gigabit controller) will wake the system up from suspend, but they
   may no longer work after wakeup (and in that case will no longer work
   as wakeup source in a subsequent suspend-wakeup cycle).

   This issue appears in the logs with messages such as:

     usb 1-6.1-port4: cannot disable (err = -71)
     usb 1-6-port2: cannot disable (err = -71)
     usb 1-6.1: clear tt 1 (80c0) error -71
     usb 1-6-port4: cannot disable (err = -71)
     usb 1-6.4: PM: dpm_run_callback(): usb_dev_resume+0x0/0x10 [usbcore] returns -71
     usb 1-6.4: PM: failed to resume async: error -71
     usb 1-7: reset full-speed USB device number 5 using xhci_hcd
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: Cannot enable. Maybe the USB cable is bad?
     usb 1-6.1-port1: cannot disable (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: cannot reset (err = -71)
     usb 1-6.1-port1: Cannot enable. Maybe the USB cable is bad?
     usb 1-6.1-port1: cannot disable (err = -71)

2) Some USB devices cannot be enumerated properly. So far I have only
   seen the issue with USB 3.0 devices. The same devices work without
   problem directly connected to the host system, to other systems or to
   other hubs (even when those hubs are connected to the OneLink+ dock).

   One very reliable reproducer is this USB 3.0 HDD enclosure:
   152d:9561 JMicron Technology Corp. / JMicron USA Technology Corp. Mobius

   I have seen it happen sporadically with other USB 3.0 enclosures,
   with controllers from different manufacturers, all self-powered.

   Typical messages in the logs:

     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     usb 2-1.4: device not accepting address 6, error -62
     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     usb 2-1.4: device not accepting address 7, error -62
     usb 2-1-port4: attempt power cycle
     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     usb 2-1.4: device not accepting address 8, error -62
     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
     usb 2-1.4: device not accepting address 9, error -62
     usb 2-1-port4: unable to enumerate USB device

Through trial and error, I found that the USB_QUIRK_RESET_RESUME solved
the second issue. Further testing then uncovered the first issue. Test
results are summarized in this table:

=======================================================================================
Settings                        USB2 hotplug    USB3 hotplug    State after waking up
---------------------------------------------------------------------------------------

power/control=auto              works           fails           broken

usbcore.autosuspend=-1          works           works           broken
OR power/control=on

power/control=auto              works (1)       works (1)       works
and USB_QUIRK_RESET_RESUME

power/control=on                works           works           works
and USB_QUIRK_RESET_RESUME

HUB_QUIRK_DISABLE_AUTOSUSPEND   works           works           works
and USB_QUIRK_RESET_RESUME

=======================================================================================

In those results, the power/control settings are applied to both hubs,
both on the USB2 and USB3 side, before each test.

From those results, USB_QUIRK_RESET_RESUME is required to reset the hubs
properly after a suspend-wakeup cycle, and the hubs must not autosuspend
to work around the USB3 issue.

A secondary effect of USB_QUIRK_RESET_RESUME is to prevent the hubs'
upstream links from suspending (the downstream ports can still suspend).
This secondary effect is used in results (1). It is enough to solve the
USB3 problem.

Setting USB_QUIRK_RESET_RESUME on those hubs is the smallest patch that
solves both issues.

Prior to creating this patch, I have used the USB_QUIRK_RESET_RESUME via
the kernel command line for over a year without noticing any side
effect.

Thanks to Oliver Neukum @Suse for explanations of the operations of
USB_QUIRK_RESET_RESUME, and requesting more testing.

Signed-off-by: Jean-Francois Le Fillatre <jflf_kernel@gmx.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220927073407.5672-1-jflf_kernel@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: dbc: Fix memory leak in xhci_alloc_dbc()

commit d591b32e519603524a35b172156db71df9116902 upstream.

If DbC is already in use, then the allocated memory for the xhci_dbc struct
doesn't get freed before returning NULL, which leads to a memleak.

Fixes: 534675942e90 ("xhci: dbc: refactor xhci_dbc_init()")
Cc: stable@vger.kernel.org
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220921123450.671459-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: pressure: dps310: Reset chip after timeout

commit 7b4ab4abcea4c0c10b25187bf2569e5a07e9a20c upstream.

The DPS310 chip has been observed to get "stuck" such that pressure
and temperature measurements are never indicated as "ready" in the
MEAS_CFG register. The only solution is to reset the device and try
again. In order to avoid continual failures, use a boolean flag to
only try the reset after timeout once if errors persist.

Fixes: ba6ec48e76bc ("iio: Add driver for Infineon DPS310")
Cc: <stable@vger.kernel.org>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220915195719.136812-3-eajames@linux.ibm.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: pressure: dps310: Refactor startup procedure

commit c2329717bdd3fa62f8a2f3d8d85ad0bee4556bd7 upstream.

Move the startup procedure into a function, and correct a missing
check on the return code for writing the PRS_CFG register.

Cc: <stable@vger.kernel.org>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220915195719.136812-2-eajames@linux.ibm.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: ad7923: fix channel readings for some variants

commit f4f43f01cff2f29779343ade755191afd2581c77 upstream.

Some of the supported devices have 4 or 2 LSB trailing bits that should
not be taken into account. Hence we need to shift these bits out which
fits perfectly on the scan type shift property. This change fixes both
raw and buffered reads.

Fixes: f2f7a449707e ("iio:adc:ad7923: Add support for the ad7904/ad7914/ad7924")
Fixes: 851644a60d20 ("iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220912081223.173584-2-nuno.sa@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ltc2497: Fix reading conversion results

commit 7f4f1096d5921f5d90547596f9ce80e0b924f887 upstream.

After the result of the previous conversion is read the chip
automatically starts a new conversion and doesn't accept new i2c
transfers until this conversion is completed which makes the function
return failure.

So add an early return iff the programming of the new address isn't
needed. Note this will not fix the problem in general, but all cases
that are currently used. Once this changes we get the failure back, but
this can be addressed when the need arises.

Fixes: 69548b7c2c4f ("iio: adc: ltc2497: split protocol independent part in a separate module ")
Reported-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Denys Zagorui <dzagorui@cisco.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220815091647.1523532-1-dzagorui@cisco.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: dac: ad5593r: Fix i2c read protocol requirements

commit 558a25f903b4af6361b7fbeea08a6446a0745653 upstream.

For reliable operation across the full range of supported
interface rates, the AD5593R needs a STOP condition between
address write, and data read (like show in the datasheet Figure 40)
so in turn i2c_smbus_read_word_swapped cannot be used.

While at it, a simple helper was added to make the code simpler.

Fixes: 56ca9db862bf ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs")
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220913073413.140475-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix the error length of VALIDATE_NEGOTIATE_INFO message

commit e98ecc6e94f4e6d21c06660b0f336df02836694f upstream.

Commit d5c7076b772a ("smb3: add smb3.1.1 to default dialect list")
extend the dialects from 3 to 4, but forget to decrease the extended
length when specific the dialect, then the message length is larger
than expected.

This maybe leak some info through network because not initialize the
message body.

After apply this patch, the VALIDATE_NEGOTIATE_INFO message length is
reduced from 28 bytes to 26 bytes.

Fixes: d5c7076b772a ("smb3: add smb3.1.1 to default dialect list")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Cc: <stable@vger.kernel.org>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: destage dirty pages before re-reading them for cache=none

commit bb44c31cdcac107344dd2fcc3bd0504a53575c51 upstream.

This is the opposite case of kernel bugzilla 216301.
If we mmap a file using cache=none and then proceed to update the mmapped
area these updates are not reflected in a later pread() of that part of the
file.
To fix this we must first destage any dirty pages in the range before
we allow the pread() to proceed.

Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hv_netvsc: Fix race between VF offering and VF association message from host

commit 365e1ececb2905f94cc10a5817c5b644a32a3ae2 upstream.

During vm boot, there might be possibility that vf registration
call comes before the vf association from host to vm.

And this might break netvsc vf path, To prevent the same block
vf registration until vf bind message comes from host.

Cc: stable@vger.kernel.org
Fixes: 00d7ddba11436 ("hv_netvsc: pair VF based on serial number")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Gaurav Kohli <gauravkohli@linux.microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring/net: don't update msg_name if not provided

commit 6f10ae8a155446248055c7ddd480ef40139af788 upstream.

io_sendmsg_copy_hdr() may clear msg->msg_name if the userspace didn't
provide it, we should retain NULL in this case.

Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/97d49f61b5ec76d0900df658cfde3aa59ff22121.1664486545.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: atmel: Unmap streaming DMA mappings

commit 1161703c9bd664da5e3b2eb1a3bb40c210e026ea upstream.

Every dma_map_single() call should have its dma_unmap_single() counterpart,
because the DMA address space is a shared resource and one could render the
machine unusable by consuming all DMA addresses.

Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/
Cc: stable@vger.kernel.org
Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Alexander Dahl <ada@thorsis.com>
Reported-by: Peter Rosin <peda@axentia.se>
Tested-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220728074014.145406-1-tudor.ambarus@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add Intel Reference SSID to support headset keys

commit 4f2e56a59b9947b3e698d3cabcb858765c12b1e8 upstream.

This patch fixes the issue with 3.5mm headset keys
on RPL-P platform.

[ Rearranged the entry in SSID order by tiwai ]

Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Signed-off-by: Ninad Naik <ninad.naik@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221011044916.2278867-1-saranya.gopal@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for ASUS GV601R laptop

commit 2ea8e1297801f7b0220ebf6ae61a5b74ca83981e upstream.

The ASUS ROG X16 (GV601R) series laptop has the same node-to-DAC pairs
as early models and the G14, this includes bass speakers which are by
default mapped incorrectly to the 0x06 node.

Add a quirk to use the same DAC pairs as the G14.

Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221010070347.36883-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Correct pin configs for ASUS G533Z

commit 66ba7c88507344dee68ad1acbdb630473ab36114 upstream.

The initial fix for ASUS G533Z was based on faulty information. This
fixes the pincfg to values that have been verified with no existing
module options or other hacks enabled.

Enables headphone jack, and 5.1 surround.

[ corrected the indent level by tiwai ]

Fixes: bc2c23549ccd ("ALSA: hda/realtek: Add pincfg for ASUS G533Z HP jack")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221010065702.35190-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: remove ALC289_FIXUP_DUAL_SPK for Dell 5530

commit 417b9c51f59734d852e47252476fadc293ad994a upstream.

After some feedback from users with Dell Precision 5530 machines, this
patch reverts the previous change to add ALC289_FIXUP_DUAL_SPK.
While it improved the speaker output quality, it caused the headphone
jack to have an audible "pop" sound when power saving was toggled.

Fixes: 1885ff13d4c4 ("ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5530 laptop")
Signed-off-by: Callum Osmotherly <callum.osmotherly@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/Yz0uyN1zwZhnyRD6@piranha
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix NULL dererence at error path

commit 568be8aaf8a535f79c4db76cabe17b035aa2584d upstream.

At an error path to release URB buffers and contexts, the driver might
hit a NULL dererence for u->urb pointer, when u->buffer_size has been
already set but the actual URB allocation failed.

Fix it by adding the NULL check of urb.  Also, make sure that
buffer_size is cleared after the error path or the close.

Cc: <stable@vger.kernel.org>
Reported-by: Sabri N. Ferreiro <snferreiro1@gmail.com>
Link: https://lore.kernel.org/r/CAKG+3NRjTey+fFfUEGwuxL-pi_=T4cUskYG9OzpzHytF+tzYng@mail.gmail.com
Link: https://lore.kernel.org/r/20220930100129.19445-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix potential memory leaks

commit 6382da0828995af87aa8b8bef28cc61aceb4aff3 upstream.

When the driver hits -ENOMEM at allocating a URB or a buffer, it
aborts and goes to the error path that releases the all previously
allocated resources.  However, when -ENOMEM hits at the middle of the
sync EP URB allocation loop, the partially allocated URBs might be
left without released, because ep->nurbs is still zero at that point.

Fix it by setting ep->nurbs at first, so that the error handler loops
over the full URB list.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220930100151.19461-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: rawmidi: Drop register_mutex in snd_rawmidi_free()

commit a70aef7982b012e86dfd39fbb235e76a21ae778a upstream.

The register_mutex taken around the dev_unregister callback call in
snd_rawmidi_free() may potentially lead to a mutex deadlock, when OSS
emulation and a hot unplug are involved.

Since the mutex doesn't protect the actual race (as the registration
itself is already protected by another means), let's drop it.

Link: https://lore.kernel.org/r/CAB7eexJP7w1B0mVgDF0dQ+gWor7UdkiwPczmL7pn91xx8xpzOA@mail.gmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221011070147.7611-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: oss: Fix potential deadlock at unregistration

commit 97d917879d7f92df09c3f21fd54609a8bcd654b2 upstream.

We took sound_oss_mutex around the calls of unregister_sound_special()
at unregistering OSS devices.  This may, however, lead to a deadlock,
because we manage the card release via the card's device object, and
the release may happen at unregister_sound_special() call -- which
will take sound_oss_mutex again in turn.

Although the deadlock might be fixed by relaxing the rawmidi mutex in
the previous commit, it's safer to move unregister_sound_special()
calls themselves out of the sound_oss_mutex, too.  The call is
race-safe as the function has a spinlock protection by itself.

Link: https://lore.kernel.org/r/CAB7eexJP7w1B0mVgDF0dQ+gWor7UdkiwPczmL7pn91xx8xpzOA@mail.gmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221011070147.7611-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "fs: check FMODE_LSEEK to control internal pipe splicing"

This reverts commit fd0a6e99b61e6c08fa5cf585d54fd956f70c73a6.

Which was upstream commit 97ef77c52b789ec1411d360ed99dca1efe4b2c81.

The commit is missing dependencies and breaks NFS tests, remove it for
now.

Reported-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.15.74

Link: https://lore.kernel.org/r/20221013175143.518476113@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221014082515.704103805@linuxfoundation.org
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Slade Watkins <srw@sladewatkins.net>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: mac80211: fix MBSSID parsing use-after-free

commit ff05d4b45dd89b922578dac497dcabf57cf771c6

When we parse a multi-BSSID element, we might point some
element pointers into the allocated nontransmitted_profile.
However, we free this before returning, causing UAF when the
relevant pointers in the parsed elements are accessed.

Fix this by not allocating the scratch buffer separately but
as part of the returned structure instead, that way, there
are no lifetime issues with it.

The scratch buffer introduction as part of the returned data
here is taken from MLO feature work done by Ilan.

This fixes CVE-2022-42719.

Fixes: 5023b14cf4df ("mac80211: support profile split between elements")
Co-developed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix memory leaks with element parsing

commit 8223ac199a3849257e86ec27865dc63f034b1cf1 upstream.

My previous commit 5d24828d05f3 ("mac80211: always allocate
struct ieee802_11_elems") had a few bugs and leaked the new
allocated struct in a few error cases, fix that.

Fixes: 5d24828d05f3 ("mac80211: always allocate struct ieee802_11_elems")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20211001211108.9839928e42e0.Ib81ca187d3d3af7ed1bfeac2e00d08a4637c8025@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: always allocate struct ieee802_11_elems

As the 802.11 spec evolves, we need to parse more and more
elements. This is causing the struct to grow, and we can no
longer get away with putting it on the stack.

Change the API to always dynamically allocate and return an
allocated pointer that must be kfree()d later.

As an alternative, I contemplated a scheme whereby we'd say
in the code which elements we needed, e.g.

    DECLARE_ELEMENT_PARSER(elems,
                           SUPPORTED_CHANNELS,
                           CHANNEL_SWITCH,
                           EXT(KEY_DELIVERY));

    ieee802_11_parse_elems(..., &elems, ...);

and while I think this is possible and will save us a lot
since most individual places only care about a small subset
of the elements, it ended up being a bit more work since a
lot of places do the parsing and then pass the struct to
other functions, sometimes with multiple levels.

Link: https://lore.kernel.org/r/20210920154009.26caff6b5998.I05ae58768e990e611aee8eca8abefd9d7bc15e05@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: mlme: find auth challenge directly

commit 49a765d6785e99157ff5091cc37485732496864e upstream.

There's no need to parse all elements etc. just to find the
authentication challenge - use cfg80211_find_elem() instead.
This also allows us to remove WLAN_EID_CHALLENGE handling
from the element parsing entirely.

Link: https://lore.kernel.org/r/20210920154009.45f9b3a15722.Ice3159ffad03a007d6154cbf1fb3a8c48489e86f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: move CRC into struct ieee802_11_elems

commit c6e37ed498f958254b5459253199e816b6bfc52f upstream.

We're currently returning this value, but to prepare for
returning the allocated structure, move it into there.

Link: https://lore.kernel.org/r/20210920154009.479b8ebf999d.If0d4ba75ee38998dc3eeae25058aa748efcb2fc9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: mesh: clean up rx_bcn_presp API

commit a5b983c6073140b624f64e79fea6d33c3e4315a0 upstream.

We currently pass the entire elements to the rx_bcn_presp()
method, but only need mesh_config. Additionally, we use the
length of the elements to calculate back the entire frame's
length, but that's confusing - just pass the length of the
frame instead.

Link: https://lore.kernel.org/r/20210920154009.a18ed3d2da6c.I1824b773a0fbae4453e1433c184678ca14e8df45@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: pci_endpoint_test: Fix pci_endpoint_test_{copy,write,read}() panic

commit 8e30538eca016de8e252bef174beadecd64239f0 upstream.

The dma_map_single() doesn't permit zero length mapping. It causes a follow
panic.

A panic was reported on arm64:

[   60.137988] ------------[ cut here ]------------
[   60.142630] kernel BUG at kernel/dma/swiotlb.c:624!
[   60.147508] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[   60.152992] Modules linked in: dw_hdmi_cec crct10dif_ce simple_bridge rcar_fdp1 vsp1 rcar_vin videobuf2_vmalloc rcar_csi2 v4l
2_mem2mem videobuf2_dma_contig videobuf2_memops pci_endpoint_test videobuf2_v4l2 videobuf2_common rcar_fcp v4l2_fwnode v4l2_asyn
c videodev mc gpio_bd9571mwv max9611 pwm_rcar ccree at24 authenc libdes phy_rcar_gen3_usb3 usb_dmac display_connector pwm_bl
[   60.186252] CPU: 0 PID: 508 Comm: pcitest Not tainted 6.0.0-rc1rpci-dev+ #237
[   60.193387] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
[   60.201302] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   60.208263] pc : swiotlb_tbl_map_single+0x2c0/0x590
[   60.213149] lr : swiotlb_map+0x88/0x1f0
[   60.216982] sp : ffff80000a883bc0
[   60.220292] x29: ffff80000a883bc0 x28: 0000000000000000 x27: 0000000000000000
[   60.227430] x26: 0000000000000000 x25: ffff0004c0da20d0 x24: ffff80000a1f77c0
[   60.234567] x23: 0000000000000002 x22: 0001000040000010 x21: 000000007a000000
[   60.241703] x20: 0000000000200000 x19: 0000000000000000 x18: 0000000000000000
[   60.248840] x17: 0000000000000000 x16: 0000000000000000 x15: ffff0006ff7b9180
[   60.255977] x14: ffff0006ff7b9180 x13: 0000000000000000 x12: 0000000000000000
[   60.263113] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[   60.270249] x8 : 0001000000000010 x7 : ffff0004c6754b20 x6 : 0000000000000000
[   60.277385] x5 : ffff0004c0da2090 x4 : 0000000000000000 x3 : 0000000000000001
[   60.284521] x2 : 0000000040000000 x1 : 0000000000000000 x0 : 0000000040000010
[   60.291658] Call trace:
[   60.294100]  swiotlb_tbl_map_single+0x2c0/0x590
[   60.298629]  swiotlb_map+0x88/0x1f0
[   60.302115]  dma_map_page_attrs+0x188/0x230
[   60.306299]  pci_endpoint_test_ioctl+0x5e4/0xd90 [pci_endpoint_test]
[   60.312660]  __arm64_sys_ioctl+0xa8/0xf0
[   60.316583]  invoke_syscall+0x44/0x108
[   60.320334]  el0_svc_common.constprop.0+0xcc/0xf0
[   60.325038]  do_el0_svc+0x2c/0xb8
[   60.328351]  el0_svc+0x2c/0x88
[   60.331406]  el0t_64_sync_handler+0xb8/0xc0
[   60.335587]  el0t_64_sync+0x18c/0x190
[   60.339251] Code: 52800013 d2e00414 35fff45c d503201f (d4210000)
[   60.345344] ---[ end trace 0000000000000000 ]---

To fix it, this patch adds a checking the payload length if it is zero.

Fixes: 343dc693f7b7 ("misc: pci_endpoint_test: Prevent some integer overflows")
Cc: stable <stable@kernel.org>
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20220907020100.122588-2-mie@igel.co.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: pci_endpoint_test: Aggregate params checking for xfer

commit 3e42deaac06567c7e86d287c305ccda24db4ae3d upstream.

Each transfer test functions have same parameter checking code. This patch
unites those to an introduced function.

Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220907020100.122588-1-mie@igel.co.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: xpad - fix wireless 360 controller breaking after suspend

commit a17b9841152e7f4621619902b347e2cc39c32996 upstream.

Suspending and resuming the system can sometimes cause the out
URB to get hung after a reset_resume. This causes LED setting
and force feedback to break on resume. To avoid this, just drop
the reset_resume callback so the USB core rebinds xpad to the
wireless pads on resume if a reset happened.

A nice side effect of this change is the LED ring on wireless
controllers is now set correctly on system resume.

Cc: stable@vger.kernel.org
Fixes: 4220f7db1e42 ("Input: xpad - workaround dead irq_out after suspend/ resume")
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20220818154411.510308-3-rojtberg@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: xpad - add supported devices as contributed on github

commit b382c5e37344883dc97525d05f1f6b788f549985 upstream.

This is based on multiple commits at https://github.com/paroj/xpad

Cc: stable@vger.kernel.org
Signed-off-by: Jasper Poppe <jgpoppe@gmail.com>
Signed-off-by: Jeremy Palmer <jpalmer@linz.govt.nz>
Signed-off-by: Ruineka <ruinairas1992@gmail.com>
Signed-off-by: Cleber de Mattos Casali <clebercasali@gmail.com>
Signed-off-by: Kyle Gospodnetich <me@kylegospodneti.ch>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20220818154411.510308-2-rojtberg@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: cfg80211: update hidden BSSes to avoid WARN_ON

commit c90b93b5b782891ebfda49d4e5da36632fefd5d1 upstream.

When updating beacon elements in a non-transmitted BSS,
also update the hidden sub-entries to the same beacon
elements, so that a future update through other paths
won't trigger a WARN_ON().

The warning is triggered because the beacon elements in
the hidden BSSes that are children of the BSS should
always be the same as in the parent.

Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: mac80211: fix crash in beacon protection for P2P-device

commit b2d03cabe2b2e150ff5a381731ea0355459be09f upstream.

If beacon protection is active but the beacon cannot be
decrypted or is otherwise malformed, we call the cfg80211
API to report this to userspace, but that uses a netdev
pointer, which isn't present for P2P-Device. Fix this to
call it only conditionally to ensure cfg80211 won't crash
in the case of P2P-Device.

This fixes CVE-2022-42722.

Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 9eaf183af741 ("mac80211: Report beacon protection failures to user space")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: mac80211_hwsim: avoid mac80211 warning on bad rate

commit 1833b6f46d7e2830251a063935ab464256defe22 upstream.

If the tool on the other side (e.g. wmediumd) gets confused
about the rate, we hit a warning in mac80211. Silence that
by effectively duplicating the check here and dropping the
frame silently (in mac80211 it's dropped with the warning).

Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: cfg80211: avoid nontransmitted BSS list corruption

commit bcca852027e5878aec911a347407ecc88d6fff7f upstream.

If a non-transmitted BSS shares enough information (both
SSID and BSSID!) with another non-transmitted BSS of a
different AP, then we can find and update it, and then
try to add it to the non-transmitted BSS list. We do a
search for it on the transmitted BSS, but if it's not
there (but belongs to another transmitted BSS), the list
gets corrupted.

Since this is an erroneous situation, simply fail the
list insertion in this case and free the non-transmitted
BSS.

This fixes CVE-2022-42721.

Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: cfg80211: fix BSS refcounting bugs

commit 0b7808818cb9df6680f98996b8e9a439fa7bcc2f upstream.

There are multiple refcounting bugs related to multi-BSSID:
 - In bss_ref_get(), if the BSS has a hidden_beacon_bss, then
   the bss pointer is overwritten before checking for the
   transmitted BSS, which is clearly wrong. Fix this by using
   the bss_from_pub() macro.

 - In cfg80211_bss_update() we copy the transmitted_bss pointer
   from tmp into new, but then if we release new, we'll unref
   it erroneously. We already set the pointer and ref it, but
   need to NULL it since it was copied from the tmp data.

 - In cfg80211_inform_single_bss_data(), if adding to the non-
   transmitted list fails, we unlink the BSS and yet still we
   return it, but this results in returning an entry without
   a reference. We shouldn't return it anyway if it was broken
   enough to not get added there.

This fixes CVE-2022-42720.

Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: a3584f56de1c ("cfg80211: Properly track transmitting and non-transmitting BSS")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: cfg80211: ensure length byte is present before access

commit 567e14e39e8f8c6997a1378bc3be615afca86063 upstream.

When iterating the elements here, ensure the length byte is
present before checking it to see if the entire element will
fit into the buffer.

Longer term, we should rewrite this code using the type-safe
element iteration macros that check all of this.

Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Reported-by: Soenke Huster <shuster@seemoo.tu-darmstadt.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: cfg80211/mac80211: reject bad MBSSID elements

commit 8f033d2becc24aa6bfd2a5c104407963560caabc upstream.

Per spec, the maximum value for the MaxBSSID ('n') indicator is 8,
and the minimum is 1 since a multiple BSSID set with just one BSSID
doesn't make sense (the # of BSSIDs is limited by 2^n).

Limit this in the parsing in both cfg80211 and mac80211, rejecting
any elements with an invalid value.

This fixes potentially bad shifts in the processing of these inside
the cfg80211_gen_new_bssid() function later.

I found this during the investigation of CVE-2022-41674 fixed by the
previous patch.

Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Fixes: 78ac51f81532 ("mac80211: support multi-bssid")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: cfg80211: fix u8 overflow in cfg80211_update_notlisted_nontrans()

commit aebe9f4639b13a1f4e9a6b42cdd2e38c617b442d upstream.

In the copy code of the elements, we do the following calculation
to reach the end of the MBSSID element:

/* copy the IEs after MBSSID */
cpy_len = mbssid[1] + 2;

This looks fine, however, cpy_len is a u8, the same as mbssid[1],
so the addition of two can overflow. In this case the subsequent
memcpy() will overflow the allocated buffer, since it copies 256
bytes too much due to the way the allocation and memcpy() sizes
are calculated.

Fix this by using size_t for the cpy_len variable.

This fixes CVE-2022-41674.

Reported-by: Soenke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Soenke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>