Yue Haibing [Tue, 21 Aug 2018 01:41:56 +0000 (01:41 +0000)]
rhashtable: remove duplicated include from rhashtable.c
Remove duplicated include.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Mon, 20 Aug 2018 20:02:41 +0000 (13:02 -0700)]
net/ipv6: Put lwtstate when destroying fib6_info
Prior to the introduction of fib6_info lwtstate was managed by the dst
code. With fib6_info releasing lwtstate needs to be done when the struct
is freed.
Fixes:
93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kai-Heng Feng [Mon, 20 Aug 2018 04:43:51 +0000 (12:43 +0800)]
r8152: disable RX aggregation on new Dell TB16 dock
There's a new Dell TB16 dock with a different iSerialNumber.
Apply the same fix from commit
0b1655143df0 ("r8152: disable RX
aggregation on Dell TB16 dock") to this model.
BugLink: https://bugs.launchpad.net/bugs/1785780
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 20 Aug 2018 18:34:39 +0000 (11:34 -0700)]
Merge branch 'qed-Misc-fixes-in-the-interface-with-the-MFW'
Tomer Tayar says:
====================
qed: Misc fixes in the interface with the MFW
This patch series fixes several issues in the driver's interface with the
management FW (MFW).
v1->v2:
- Fix loop counter decrement to be pre instead of post.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tomer Tayar [Sun, 19 Aug 2018 21:01:45 +0000 (00:01 +0300)]
qed: Avoid sending mailbox commands when MFW is not responsive
Keep sending mailbox commands to the MFW when it is not responsive ends up
with a redundant amount of timeout expiries.
This patch prints the MCP status on the first command which is not
responded, and blocks the following commands.
Since the (un)load request commands might be not responded due to other
PFs, the patch also adds the option to skip the blocking upon a failure.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tomer Tayar [Sun, 19 Aug 2018 21:01:44 +0000 (00:01 +0300)]
qed: Prevent a possible deadlock during driver load and unload
The MFW manages an internal lock to prevent concurrent hardware
(de)initialization of different PFs.
This, together with the busy-waiting for the MFW's responses for commands,
might lead to a deadlock during concurrent load or unload of PFs.
This patch adds the option to sleep within the busy-waiting, and uses it
for the (un)load requests (which are not sent from an interrupt context) to
prevent the possible deadlock.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tomer Tayar [Sun, 19 Aug 2018 21:01:43 +0000 (00:01 +0300)]
qed: Wait for MCP halt and resume commands to take place
Successive iterations of halting and resuming the management chip (MCP)
might fail, since currently the driver doesn't wait for these operations to
actually take place.
This patch prevents the driver from moving forward before the operations
are reflected in the state register.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tomer Tayar [Sun, 19 Aug 2018 21:01:42 +0000 (00:01 +0300)]
qed: Wait for ready indication before rereading the shmem
The MFW might be reset and re-update its shared memory.
Upon the detection of such a reset the driver rereads this memory, but it
has to wait till the data is valid.
This patch adds the missing wait for a data ready indication.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Haishuang Yan [Mon, 20 Aug 2018 02:51:05 +0000 (10:51 +0800)]
ip6_vti: fix a null pointer deference when destroy vti6 tunnel
If load ip6_vti module and create a network namespace when set
fb_tunnels_only_for_init_net to 1, then exit the namespace will
cause following crash:
[ 6601.677036] BUG: unable to handle kernel NULL pointer dereference at
0000000000000008
[ 6601.679057] PGD
8000000425eca067 P4D
8000000425eca067 PUD
424292067 PMD 0
[ 6601.680483] Oops: 0000 [#1] SMP PTI
[ 6601.681223] CPU: 7 PID: 93 Comm: kworker/u16:1 Kdump: loaded Tainted: G E 4.18.0+ #3
[ 6601.683153] Hardware name: Fedora Project OpenStack Nova, BIOS seabios-1.7.5-11.el7 04/01/2014
[ 6601.684919] Workqueue: netns cleanup_net
[ 6601.685742] RIP: 0010:vti6_exit_batch_net+0x87/0xd0 [ip6_vti]
[ 6601.686932] Code: 7b 08 48 89 e6 e8 b9 ea d3 dd 48 8b 1b 48 85 db 75 ec 48 83 c5 08 48 81 fd 00 01 00 00 75 d5 49 8b 84 24 08 01 00 00 48 89 e6 <48> 8b 78 08 e8 90 ea d3 dd 49 8b 45 28 49 39 c6 4c 8d 68 d8 75 a1
[ 6601.690735] RSP: 0018:
ffffa897c2737de0 EFLAGS:
00010246
[ 6601.691846] RAX:
0000000000000000 RBX:
0000000000000000 RCX:
dead000000000200
[ 6601.693324] RDX:
0000000000000015 RSI:
ffffa897c2737de0 RDI:
ffffffff9f2ea9e0
[ 6601.694824] RBP:
0000000000000100 R08:
0000000000000000 R09:
0000000000000000
[ 6601.696314] R10:
0000000000000001 R11:
0000000000000000 R12:
ffff8dc323c07e00
[ 6601.697812] R13:
ffff8dc324a63100 R14:
ffffa897c2737e30 R15:
ffffa897c2737e30
[ 6601.699345] FS:
0000000000000000(0000) GS:
ffff8dc33fdc0000(0000) knlGS:
0000000000000000
[ 6601.701068] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 6601.702282] CR2:
0000000000000008 CR3:
0000000424966002 CR4:
00000000001606e0
[ 6601.703791] Call Trace:
[ 6601.704329] cleanup_net+0x1b4/0x2c0
[ 6601.705268] process_one_work+0x16c/0x370
[ 6601.706145] worker_thread+0x49/0x3e0
[ 6601.706942] kthread+0xf8/0x130
[ 6601.707626] ? rescuer_thread+0x340/0x340
[ 6601.708476] ? kthread_bind+0x10/0x10
[ 6601.709266] ret_from_fork+0x35/0x40
Reproduce:
modprobe ip6_vti
echo 1 > /proc/sys/net/core/fb_tunnels_only_for_init_net
unshare -n
exit
This because ip6n->tnls_wc[0] point to fallback device in default, but
in non-default namespace, ip6n->tnls_wc[0] will be NULL, so add the NULL
check comparatively.
Fixes:
e2948e5af8ee ("ip6_vti: fix creating fallback tunnel device for vti6")
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 19 Aug 2018 18:51:45 +0000 (11:51 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix races in IPVS, from Tan Hu.
2) Missing unbind in matchall classifier, from Hangbin Liu.
3) Missing act_ife action release, from Vlad Buslov.
4) Cure lockdep splats in ila, from Cong Wang.
5) veth queue leak on link delete, from Toshiaki Makita.
6) Disable isdn's IIOCDBGVAR ioctl, it exposes kernel addresses. From
Kees Cook.
7) RCU usage fixup in XDP, from Tariq Toukan.
8) Two TCP ULP fixes from Daniel Borkmann.
9) r8169 needs REALTEK_PHY as a Kconfig dependency, from Heiner
Kallweit.
10) Always take tcf_lock with BH disabled, otherwise we can deadlock
with rate estimator code paths. From Vlad Buslov.
11) Don't use MSI-X on RTL8106e r8169 chips, they don't resume properly.
From Jian-Hong Pan.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
ip6_vti: fix creating fallback tunnel device for vti6
ip_vti: fix a null pointer deferrence when create vti fallback tunnel
r8169: don't use MSI-X on RTL8106e
net: lan743x_ptp: convert to ktime_get_clocktai_ts64
net: sched: always disable bh when taking tcf_lock
ip6_vti: simplify stats handling in vti6_xmit
bpf: fix redirect to map under tail calls
r8169: add missing Kconfig dependency
tools/bpf: fix bpf selftest test_cgroup_storage failure
bpf, sockmap: fix sock_map_ctx_update_elem race with exist/noexist
bpf, sockmap: fix map elem deletion race with smap_stop_sock
bpf, sockmap: fix leakage of smap_psock_map_entry
tcp, ulp: fix leftover icsk_ulp_ops preventing sock from reattach
tcp, ulp: add alias for all ulp modules
bpf: fix a rcu usage warning in bpf_prog_array_copy_core()
samples/bpf: all XDP samples should unload xdp/bpf prog on SIGTERM
net/xdp: Fix suspicious RCU usage warning
net/mlx5e: Delete unneeded function argument
Documentation: networking: ti-cpsw: correct cbs parameters for Eth1 100Mb
isdn: Disable IIOCDBGVAR
...
Haishuang Yan [Sun, 19 Aug 2018 07:05:05 +0000 (15:05 +0800)]
ip6_vti: fix creating fallback tunnel device for vti6
When set fb_tunnels_only_for_init_net to 1, don't create fallback tunnel
device for vti6 when a new namespace is created.
Tested:
[root@builder2 ~]# modprobe ip6_tunnel
[root@builder2 ~]# modprobe ip6_vti
[root@builder2 ~]# echo 1 > /proc/sys/net/core/fb_tunnels_only_for_init_net
[root@builder2 ~]# unshare -n
[root@builder2 ~]# ip link
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Haishuang Yan [Sun, 19 Aug 2018 07:05:04 +0000 (15:05 +0800)]
ip_vti: fix a null pointer deferrence when create vti fallback tunnel
After set fb_tunnels_only_for_init_net to 1, the itn->fb_tunnel_dev will
be NULL and will cause following crash:
[ 2742.849298] BUG: unable to handle kernel NULL pointer dereference at
0000000000000941
[ 2742.851380] PGD
800000042c21a067 P4D
800000042c21a067 PUD
42aaed067 PMD 0
[ 2742.852818] Oops: 0002 [#1] SMP PTI
[ 2742.853570] CPU: 7 PID: 2484 Comm: unshare Kdump: loaded Not tainted 4.18.0-rc8+ #2
[ 2742.855163] Hardware name: Fedora Project OpenStack Nova, BIOS seabios-1.7.5-11.el7 04/01/2014
[ 2742.856970] RIP: 0010:vti_init_net+0x3a/0x50 [ip_vti]
[ 2742.858034] Code: 90 83 c0 48 c7 c2 20 a1 83 c0 48 89 fb e8 6e 3b f6 ff 85 c0 75 22 8b 0d f4 19 00 00 48 8b 93 00 14 00 00 48 8b 14 ca 48 8b 12 <c6> 82 41 09 00 00 04 c6 82 38 09 00 00 45 5b c3 66 0f 1f 44 00 00
[ 2742.861940] RSP: 0018:
ffff9be28207fde0 EFLAGS:
00010246
[ 2742.863044] RAX:
0000000000000000 RBX:
ffff8a71ebed4980 RCX:
0000000000000013
[ 2742.864540] RDX:
0000000000000000 RSI:
0000000000000013 RDI:
ffff8a71ebed4980
[ 2742.866020] RBP:
ffff8a71ea717000 R08:
ffffffffc083903c R09:
ffff8a71ea717000
[ 2742.867505] R10:
0000000000000000 R11:
0000000000000000 R12:
ffff8a71ebed4980
[ 2742.868987] R13:
0000000000000013 R14:
ffff8a71ea5b49c0 R15:
0000000000000000
[ 2742.870473] FS:
00007f02266c9740(0000) GS:
ffff8a71ffdc0000(0000) knlGS:
0000000000000000
[ 2742.872143] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 2742.873340] CR2:
0000000000000941 CR3:
000000042bc20006 CR4:
00000000001606e0
[ 2742.874821] Call Trace:
[ 2742.875358] ops_init+0x38/0xf0
[ 2742.876078] setup_net+0xd9/0x1f0
[ 2742.876789] copy_net_ns+0xb7/0x130
[ 2742.877538] create_new_namespaces+0x11a/0x1d0
[ 2742.878525] unshare_nsproxy_namespaces+0x55/0xa0
[ 2742.879526] ksys_unshare+0x1a7/0x330
[ 2742.880313] __x64_sys_unshare+0xe/0x20
[ 2742.881131] do_syscall_64+0x5b/0x180
[ 2742.881933] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reproduce:
echo 1 > /proc/sys/net/core/fb_tunnels_only_for_init_net
modprobe ip_vti
unshare -n
Fixes:
79134e6ce2c9 ("net: do not create fallback tunnels for non-default namespaces")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian-Hong Pan [Fri, 17 Aug 2018 05:07:35 +0000 (13:07 +0800)]
r8169: don't use MSI-X on RTL8106e
Found the ethernet network on ASUS X441UAR doesn't come back on resume
from suspend when using MSI-X. The chip is RTL8106e - version 39.
[ 21.848357] libphy: r8169: probed
[ 21.848473] r8169 0000:02:00.0 eth0: RTL8106e, 0c:9d:92:32:67:b4, XID
44900000, IRQ 127
[ 22.518860] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 29.458041] Generic PHY r8169-200:00: attached PHY driver [Generic
PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[ 63.227398] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full -
flow control off
[ 124.514648] Generic PHY r8169-200:00: attached PHY driver [Generic
PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
Here is the ethernet controller in detail:
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136]
(rev 07)
Subsystem: ASUSTeK Computer Inc. RTL810xE PCI Express Fast
Ethernet controller [1043:200f]
Flags: bus master, fast devsel, latency 0, IRQ 16
I/O ports at e000 [size=256]
Memory at
ef100000 (64-bit, non-prefetchable) [size=4K]
Memory at
e0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
Falling back to MSI fixes the issue.
Fixes:
6c6aa15fdea5 ("r8169: improve interrupt handling")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 15 Aug 2018 17:49:49 +0000 (19:49 +0200)]
net: lan743x_ptp: convert to ktime_get_clocktai_ts64
timekeeping_clocktai64() has been renamed to ktime_get_clocktai_ts64()
for consistency with the other ktime_get_* access functions.
Rename the new caller that has come up as well.
Question: this is the only ptp driver that sets the hardware time
to the current system time in TAI. Why does it do that?
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov [Tue, 14 Aug 2018 18:46:16 +0000 (21:46 +0300)]
net: sched: always disable bh when taking tcf_lock
Recently, ops->init() and ops->dump() of all actions were modified to
always obtain tcf_lock when accessing private action state. Actions that
don't depend on tcf_lock for synchronization with their data path use
non-bh locking API. However, tcf_lock is also used to protect rate
estimator stats in softirq context by timer callback.
Change ops->init() and ops->dump() of all actions to disable bh when using
tcf_lock to prevent deadlock reported by following lockdep warning:
[ 105.470398] ================================
[ 105.475014] WARNING: inconsistent lock state
[ 105.479628] 4.18.0-rc8+ #664 Not tainted
[ 105.483897] --------------------------------
[ 105.488511] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[ 105.494871] swapper/16/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[ 105.500449]
00000000f86c012e (&(&p->tcfa_lock)->rlock){+.?.}, at: est_fetch_counters+0x3c/0xa0
[ 105.509696] {SOFTIRQ-ON-W} state was registered at:
[ 105.514925] _raw_spin_lock+0x2c/0x40
[ 105.519022] tcf_bpf_init+0x579/0x820 [act_bpf]
[ 105.523990] tcf_action_init_1+0x4e4/0x660
[ 105.528518] tcf_action_init+0x1ce/0x2d0
[ 105.532880] tcf_exts_validate+0x1d8/0x200
[ 105.537416] fl_change+0x55a/0x268b [cls_flower]
[ 105.542469] tc_new_tfilter+0x748/0xa20
[ 105.546738] rtnetlink_rcv_msg+0x56a/0x6d0
[ 105.551268] netlink_rcv_skb+0x18d/0x200
[ 105.555628] netlink_unicast+0x2d0/0x370
[ 105.559990] netlink_sendmsg+0x3b9/0x6a0
[ 105.564349] sock_sendmsg+0x6b/0x80
[ 105.568271] ___sys_sendmsg+0x4a1/0x520
[ 105.572547] __sys_sendmsg+0xd7/0x150
[ 105.576655] do_syscall_64+0x72/0x2c0
[ 105.580757] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 105.586243] irq event stamp: 489296
[ 105.590084] hardirqs last enabled at (489296): [<
ffffffffb507e639>] _raw_spin_unlock_irq+0x29/0x40
[ 105.599765] hardirqs last disabled at (489295): [<
ffffffffb507e745>] _raw_spin_lock_irq+0x15/0x50
[ 105.609277] softirqs last enabled at (489292): [<
ffffffffb413a6a3>] irq_enter+0x83/0xa0
[ 105.618001] softirqs last disabled at (489293): [<
ffffffffb413a800>] irq_exit+0x140/0x190
[ 105.626813]
other info that might help us debug this:
[ 105.633976] Possible unsafe locking scenario:
[ 105.640526] CPU0
[ 105.643325] ----
[ 105.646125] lock(&(&p->tcfa_lock)->rlock);
[ 105.650747] <Interrupt>
[ 105.653717] lock(&(&p->tcfa_lock)->rlock);
[ 105.658514]
*** DEADLOCK ***
[ 105.665349] 1 lock held by swapper/16/0:
[ 105.669629] #0:
00000000a640ad99 ((&est->timer)){+.-.}, at: call_timer_fn+0x10b/0x550
[ 105.678200]
stack backtrace:
[ 105.683194] CPU: 16 PID: 0 Comm: swapper/16 Not tainted 4.18.0-rc8+ #664
[ 105.690249] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[ 105.698626] Call Trace:
[ 105.701421] <IRQ>
[ 105.703791] dump_stack+0x92/0xeb
[ 105.707461] print_usage_bug+0x336/0x34c
[ 105.711744] mark_lock+0x7c9/0x980
[ 105.715500] ? print_shortest_lock_dependencies+0x2e0/0x2e0
[ 105.721424] ? check_usage_forwards+0x230/0x230
[ 105.726315] __lock_acquire+0x923/0x26f0
[ 105.730597] ? debug_show_all_locks+0x240/0x240
[ 105.735478] ? mark_lock+0x493/0x980
[ 105.739412] ? check_chain_key+0x140/0x1f0
[ 105.743861] ? __lock_acquire+0x836/0x26f0
[ 105.748323] ? lock_acquire+0x12e/0x290
[ 105.752516] lock_acquire+0x12e/0x290
[ 105.756539] ? est_fetch_counters+0x3c/0xa0
[ 105.761084] _raw_spin_lock+0x2c/0x40
[ 105.765099] ? est_fetch_counters+0x3c/0xa0
[ 105.769633] est_fetch_counters+0x3c/0xa0
[ 105.773995] est_timer+0x87/0x390
[ 105.777670] ? est_fetch_counters+0xa0/0xa0
[ 105.782210] ? lock_acquire+0x12e/0x290
[ 105.786410] call_timer_fn+0x161/0x550
[ 105.790512] ? est_fetch_counters+0xa0/0xa0
[ 105.795055] ? del_timer_sync+0xd0/0xd0
[ 105.799249] ? __lock_is_held+0x93/0x110
[ 105.803531] ? mark_held_locks+0x20/0xe0
[ 105.807813] ? _raw_spin_unlock_irq+0x29/0x40
[ 105.812525] ? est_fetch_counters+0xa0/0xa0
[ 105.817069] ? est_fetch_counters+0xa0/0xa0
[ 105.821610] run_timer_softirq+0x3c4/0x9f0
[ 105.826064] ? lock_acquire+0x12e/0x290
[ 105.830257] ? __bpf_trace_timer_class+0x10/0x10
[ 105.835237] ? __lock_is_held+0x25/0x110
[ 105.839517] __do_softirq+0x11d/0x7bf
[ 105.843542] irq_exit+0x140/0x190
[ 105.847208] smp_apic_timer_interrupt+0xac/0x3b0
[ 105.852182] apic_timer_interrupt+0xf/0x20
[ 105.856628] </IRQ>
[ 105.859081] RIP: 0010:cpuidle_enter_state+0xd8/0x4d0
[ 105.864395] Code: 46 ff 48 89 44 24 08 0f 1f 44 00 00 31 ff e8 cf ec 46 ff 80 7c 24 07 00 0f 85 1d 02 00 00 e8 9f 90 4b ff fb 66 0f 1f 44 00 00 <4c> 8b 6c 24 08 4d 29 fd 0f 80 36 03 00 00 4c 89 e8 48 ba cf f7 53
[ 105.884288] RSP: 0018:
ffff8803ad94fd20 EFLAGS:
00000246 ORIG_RAX:
ffffffffffffff13
[ 105.892494] RAX:
0000000000000000 RBX:
ffffe8fb300829c0 RCX:
ffffffffb41e19e1
[ 105.899988] RDX:
0000000000000007 RSI:
dffffc0000000000 RDI:
ffff8803ad9358ac
[ 105.907503] RBP:
ffffffffb6636300 R08:
0000000000000004 R09:
0000000000000000
[ 105.914997] R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000000004
[ 105.922487] R13:
ffffffffb6636140 R14:
ffffffffb66362d8 R15:
000000188d36091b
[ 105.929988] ? trace_hardirqs_on_caller+0x141/0x2d0
[ 105.935232] do_idle+0x28e/0x320
[ 105.938817] ? arch_cpu_idle_exit+0x40/0x40
[ 105.943361] ? mark_lock+0x8c1/0x980
[ 105.947295] ? _raw_spin_unlock_irqrestore+0x32/0x60
[ 105.952619] cpu_startup_entry+0xc2/0xd0
[ 105.956900] ? cpu_in_idle+0x20/0x20
[ 105.960830] ? _raw_spin_unlock_irqrestore+0x32/0x60
[ 105.966146] ? trace_hardirqs_on_caller+0x141/0x2d0
[ 105.971391] start_secondary+0x2b5/0x360
[ 105.975669] ? set_cpu_sibling_map+0x1330/0x1330
[ 105.980654] secondary_startup_64+0xa5/0xb0
Taking tcf_lock in sample action with bh disabled causes lockdep to issue a
warning regarding possible irq lock inversion dependency between tcf_lock,
and psample_groups_lock that is taken when holding tcf_lock in sample init:
[ 162.108959] Possible interrupt unsafe locking scenario:
[ 162.116386] CPU0 CPU1
[ 162.121277] ---- ----
[ 162.126162] lock(psample_groups_lock);
[ 162.130447] local_irq_disable();
[ 162.136772] lock(&(&p->tcfa_lock)->rlock);
[ 162.143957] lock(psample_groups_lock);
[ 162.150813] <Interrupt>
[ 162.153808] lock(&(&p->tcfa_lock)->rlock);
[ 162.158608]
*** DEADLOCK ***
In order to prevent potential lock inversion dependency between tcf_lock
and psample_groups_lock, extract call to psample_group_get() from tcf_lock
protected section in sample action init function.
Fixes:
4e232818bd32 ("net: sched: act_mirred: remove dependency on rtnl lock")
Fixes:
764e9a24480f ("net: sched: act_vlan: remove dependency on rtnl lock")
Fixes:
729e01260989 ("net: sched: act_tunnel_key: remove dependency on rtnl lock")
Fixes:
d77284956656 ("net: sched: act_sample: remove dependency on rtnl lock")
Fixes:
e8917f437006 ("net: sched: act_gact: remove dependency on rtnl lock")
Fixes:
b6a2b971c0b0 ("net: sched: act_csum: remove dependency on rtnl lock")
Fixes:
2142236b4584 ("net: sched: act_bpf: remove dependency on rtnl lock")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 19 Aug 2018 17:38:36 +0000 (10:38 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull first set of KVM updates from Paolo Bonzini:
"PPC:
- minor code cleanups
x86:
- PCID emulation and CR3 caching for shadow page tables
- nested VMX live migration
- nested VMCS shadowing
- optimized IPI hypercall
- some optimizations
ARM will come next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (85 commits)
kvm: x86: Set highest physical address bits in non-present/reserved SPTEs
KVM/x86: Use CC_SET()/CC_OUT in arch/x86/kvm/vmx.c
KVM: X86: Implement PV IPIs in linux guest
KVM: X86: Add kvm hypervisor init time platform setup callback
KVM: X86: Implement "send IPI" hypercall
KVM/x86: Move X86_CR4_OSXSAVE check into kvm_valid_sregs()
KVM: x86: Skip pae_root shadow allocation if tdp enabled
KVM/MMU: Combine flushing remote tlb in mmu_set_spte()
KVM: vmx: skip VMWRITE of HOST_{FS,GS}_BASE when possible
KVM: vmx: skip VMWRITE of HOST_{FS,GS}_SEL when possible
KVM: vmx: always initialize HOST_{FS,GS}_BASE to zero during setup
KVM: vmx: move struct host_state usage to struct loaded_vmcs
KVM: vmx: compute need to reload FS/GS/LDT on demand
KVM: nVMX: remove a misleading comment regarding vmcs02 fields
KVM: vmx: rename __vmx_load_host_state() and vmx_save_host_state()
KVM: vmx: add dedicated utility to access guest's kernel_gs_base
KVM: vmx: track host_state.loaded using a loaded_vmcs pointer
KVM: vmx: refactor segmentation code in vmx_save_host_state()
kvm: nVMX: Fix fault priority for VMX operations
kvm: nVMX: Fix fault vector for VMX operation at CPL > 0
...
Linus Torvalds [Sun, 19 Aug 2018 16:56:38 +0000 (09:56 -0700)]
Merge tag 'riscv-for-linus-4.19-mw0' of git://git./linux/kernel/git/palmer/riscv-linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains some major improvements to the RISC-V port, including
the necessary interrupt controller and timer support to actually make
it to userspace. Support for three devices has been added:
- the ISA-mandated timers on RISC-V systems.
- the ISA-mandated first-level interrupt controller on RISC-V
systems, which is handled as part of our core arch code because
it's very small and tightly tied to the ISA.
- SiFive's platform-level interrupt controller, which talks to the
actual devices.
In addition to these new devices, there are a handful of cleanups all
over the RISC-V tree:
- build fixes for various configurations:
* A fix to the vDSO build's makefile so it respects CFLAGS.
* The addition of __lshrti3, a libgcc derived function necessary
for some 32-bit configurations.
* !SMP && PERF_EVENTS
- Cleanups to the arch code to remove the remnants of old versions of
the drivers that were just properly submitted.
* Some dead code from the timer driver, most of which wasn't ever
even compiled.
* Cleanups of some interrupt #defines, which are now local to the
interrupt handling code.
- Fixes to ptrace(), which while not being sufficient to fully make
GDB work are at least sufficient to get simple GDB tasks to work.
- Early printk support via RISC-V's architecturally mandated SBI
console device.
- A fix to our early debug trap handler to ensure it's always
aligned.
These patches have all been through a fairly extensive review process,
but as this enables a whole pile of functionality (ie, userspace) I'm
confident we'll need to submit a few more patches. The only concrete
issues I know about are the sys_riscv_flush_icache patches, but as I
managed to screw those up on Friday I figured it'd be best to let them
bake another week.
This tag boots a Fedora root filesystem on QEMU's master branch for
me, and before this morning's rebase (from 4.18-rc8 to 4.18) it booted
on the HiFive Unleashed.
Thanks to Christoph Hellwig and the other guys at WD for getting the
new drivers in shape!"
* tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
dt-bindings: interrupt-controller: SiFive Plaform Level Interrupt Controller
dt-bindings: interrupt-controller: RISC-V local interrupt controller
RISC-V: Fix !CONFIG_SMP compilation error
irqchip: add a SiFive PLIC driver
RISC-V: Add the directive for alignment of stvec's value
clocksource: new RISC-V SBI timer driver
RISC-V: implement low-level interrupt handling
RISC-V: add a definition for the SIE SEIE bit
RISC-V: remove INTERRUPT_CAUSE_* defines from asm/irq.h
RISC-V: simplify software interrupt / IPI code
RISC-V: remove timer leftovers
RISC-V: Add early printk support via the SBI console
RISC-V: Don't increment sepc after breakpoint.
RISC-V: implement __lshrti3.
RISC-V: Use KBUILD_CFLAGS instead of KCFLAGS when building the vDSO
Linus Torvalds [Sun, 19 Aug 2018 16:30:44 +0000 (09:30 -0700)]
Merge tag 'char-misc-4.19-rc1' of git://git./linux/kernel/git/gregkh/char-misc
Pull UIO fix from Greg KH:
"Here is a single UIO fix that I forgot to send before 4.18-final came
out. It reverts a UIO patch that went in the 4.18 development window
that was causing problems.
This patch has been in linux-next for a while with no problems, I just
forgot to send it earlier, or as part of the larger char/misc patch
series from yesterday, my fault"
* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Revert "uio: use request_threaded_irq instead"
Linus Torvalds [Sat, 18 Aug 2018 23:48:07 +0000 (16:48 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new driver for Rohm BU21029 touch controller
- new bitmap APIs: bitmap_alloc, bitmap_zalloc and bitmap_free
- updates to Atmel, eeti. pxrc and iforce drivers
- assorted driver cleanups and fixes.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
MAINTAINERS: Add PhoenixRC Flight Controller Adapter
Input: do not use WARN() in input_alloc_absinfo()
Input: mark expected switch fall-throughs
Input: raydium_i2c_ts - use true and false for boolean values
Input: evdev - switch to bitmap API
Input: gpio-keys - switch to bitmap_zalloc()
Input: elan_i2c_smbus - cast sizeof to int for comparison
bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free()
md: Avoid namespace collision with bitmap API
dm: Avoid namespace collision with bitmap API
Input: pm8941-pwrkey - add resin entry
Input: pm8941-pwrkey - abstract register offsets and event code
Input: iforce - reorganize joystick configuration lists
Input: atmel_mxt_ts - move completion to after config crc is updated
Input: atmel_mxt_ts - don't report zero pressure from T9
Input: atmel_mxt_ts - zero terminate config firmware file
Input: atmel_mxt_ts - refactor config update code to add context struct
Input: atmel_mxt_ts - config CRC may start at T71
Input: atmel_mxt_ts - remove unnecessary debug on ENOMEM
Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURE
...
Linus Torvalds [Sat, 18 Aug 2018 23:45:27 +0000 (16:45 -0700)]
Merge tag 'hwlock-v4.19' of git://github.com/andersson/remoteproc
Pull hwspinlock updates from Bjorn Andersson:
"This introduces devres helpers and an API to request a lock by name,
then migrates the sprd SPI driver to use these"
* tag 'hwlock-v4.19' of git://github.com/andersson/remoteproc:
hwspinlock: Fix incorrect return pointers
spi: sprd: Change to use devm_hwspin_lock_request_specific()
spi: sprd: Replace of_hwspin_lock_get_id() with of_hwspin_lock_get_id_byname()
hwspinlock: Fix one comment mistake
hwspinlock: Remove redundant config
hwspinlock: Add devm_xxx() APIs to register/unregister one hwlock controller
hwspinlock: Add devm_xxx() APIs to request/free hwlock
hwspinlock: Add one new API to support getting a specific hwlock by the name
Linus Torvalds [Sat, 18 Aug 2018 23:43:57 +0000 (16:43 -0700)]
Merge tag 'rpmsg-v4.19' of git://github.com/andersson/remoteproc
Pull rpmsg updates from Bjorn Andersson:
"This fixes a few compile and kerneldoc warnings, allows rpmsg devices
to handle power domains, allow for labeling GLINK edges and supports
compat for rpmsg_char"
* tag 'rpmsg-v4.19' of git://github.com/andersson/remoteproc:
rpmsg: Add compat ioctl for rpmsg char driver
rpmsg: glink: Store edge name for glink device
dt-bindings: soc: qcom: Add label for GLINK bindings
rpmsg: core: add support to power domains for devices
rpmsg: smd: fix kerneldoc warnings
rpmsg: glink: Fix various kerneldoc warnings.
rpmsg: glink: correctly annotate intent members
rpmsg: smd: Add missing include of sizes.h
Linus Torvalds [Sat, 18 Aug 2018 23:42:04 +0000 (16:42 -0700)]
Merge tag 'rproc-v4.19' of git://github.com/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This adds support for pre-start and post-shutdown hooks for remoteproc
subdevices, refactors the Qualcomm Hexagon support to allow reuse
between several drivers, makes authentication in the MDT file loader
optional, migrates a few format strings to use %pK and migrates the
Davinci driver to use the reset framework"
* tag 'rproc-v4.19' of git://github.com/andersson/remoteproc:
remoteproc/davinci: use the reset framework
remoteproc/davinci: Mark error recovery as disabled
remoteproc: st_slim: replace "%p" with "%pK"
remoteproc: replace "%p" with "%pK"
remoteproc: qcom: fix Q6V5_WCSS dependencies
remoteproc: Reset table_ptr in rproc_start() failure paths
remoteproc: qcom: q6v5-pil: fix modem hang on SDM845 after axis2 clk unvote
remoteproc: qcom q6v5: fix modular build
remoteproc: Introduce prepare and unprepare for subdevices
remoteproc: rename subdev probe and remove functions
remoteproc: Make client initialize ops in rproc_subdev
remoteproc: Make start and stop in subdev optional
remoteproc: Rename subdev functions to start/stop
remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
remoteproc: qcom: q6v5-pil: Use common q6v5 helpers
remoteproc: qcom: adsp: Use common q6v5 helpers
remoteproc: q6v5: Extract common resource handling
remoteproc: qcom: mdt_loader: Make the firmware authentication optional
Linus Torvalds [Sat, 18 Aug 2018 23:16:57 +0000 (16:16 -0700)]
Merge tag 'linux-watchdog-4.19-rc1' of git://linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add MEN 16z069 IP-Core driver
- renesas-wdt: add support for the R8A77990 wdt
- stm32_iwdg: Add stm32mp1 support and pclk feature
- sp805_wdt, orion_wdt, sprd_wdt: several improvements
- imx2_wdt, stmp3xxx: switch to SPDX identifier
* tag 'linux-watchdog-4.19-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: fix dependencies of menz69_wdt.o
watchdog: sp805: Add clock-frequency property
watchdog: add driver for the MEN 16z069 IP-Core
watchdog: sprd_wdt: Remove redundant dev_err call in sprd_wdt_probe()
watchdog: stmp3xxx: Switch to SPDX identifier
watchdog: imx2_wdt: Switch to SPDX identifier
watchdog: sp805: set WDOG_HW_RUNNING when appropriate
watchdog: sp805: add 'timeout-sec' DT property support
dt-bindings: watchdog: Add optional 'timeout-sec' property for sp805
dt-bindings: watchdog: Consolidate SP805 binding docs
watchdog: orion_wdt: Mark watchdog as active when running at probe
watchdog: stm32: add pclk feature for stm32mp1
dt-bindings: watchdog: add stm32mp1 support
dt-bindings: watchdog: renesas-wdt: Add support for the R8A77990 wdt
Linus Torvalds [Sat, 18 Aug 2018 22:55:59 +0000 (15:55 -0700)]
Merge tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull DMAengine updates from Vinod Koul:
"This round brings couple of framework changes, a new driver and usual
driver updates:
- new managed helper for dmaengine framework registration
- split dmaengine pause capability to pause and resume and allow
drivers to report that individually
- update dma_request_chan_by_mask() to handle deferred probing
- move imx-sdma to use virt-dma
- new driver for Actions Semi Owl family S900 controller
- minor updates to intel, renesas, mv_xor, pl330 etc"
* tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits)
dmaengine: Add Actions Semi Owl family S900 DMA driver
dt-bindings: dmaengine: Add binding for Actions Semi Owl SoCs
dmaengine: sh: rcar-dmac: Should not stop the DMAC by rcar_dmac_sync_tcr()
dmaengine: mic_x100_dma: use the new helper to simplify the code
dmaengine: add a new helper dmaenginem_async_device_register
dmaengine: imx-sdma: add memcpy interface
dmaengine: imx-sdma: add SDMA_BD_MAX_CNT to replace '0xffff'
dmaengine: dma_request_chan_by_mask() to handle deferred probing
dmaengine: pl330: fix irq race with terminate_all
dmaengine: Revert "dmaengine: mv_xor_v2: enable COMPILE_TEST"
dmaengine: mv_xor_v2: use {lower,upper}_32_bits to configure HW descriptor address
dmaengine: mv_xor_v2: enable COMPILE_TEST
dmaengine: mv_xor_v2: move unmap to before callback
dmaengine: mv_xor_v2: convert callback to helper function
dmaengine: mv_xor_v2: kill the tasklets upon exit
dmaengine: mv_xor_v2: explicitly freeup irq
dmaengine: sh: rcar-dmac: Add dma_pause operation
dmaengine: sh: rcar-dmac: add a new function to clear CHCR.DE with barrier
dmaengine: idma64: Support dmaengine_terminate_sync()
dmaengine: hsu: Support dmaengine_terminate_sync()
...
Linus Torvalds [Sat, 18 Aug 2018 22:54:05 +0000 (15:54 -0700)]
Merge tag 'mmc-v4.19' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"Updates for MMC for v4.19.
MMC core:
- Add some fine-grained hooks to further support HS400 tuning
- Improve error path for bus width setting for HS400es
- Use a common method when checking R1 status
MMC host:
- renesas_sdhi: Add r8a77990 support
- renesas_sdhi: Add eMMC HS400 mode support
- tmio/renesas_sdhi: Improve tuning/clock management
- tmio: Add eMMC HS400 mode support
- sunxi: Add support for 3.3V eMMC DDR mode
- mmci: Initial support to manage variant specific callbacks
- sdhci: Don't try 3.3V I/O voltage if not supported
- sdhci-pci-dwc-mshc: Add driver to support Synopsys dwc mshc SDHCI PCI
- sdhci-of-dwcmshc: Add driver to support Synopsys DWC MSHC SDHCI
- sdhci-msm: Add support for new version sdcc V5
- sdhci-pci-o2micro: Add support for O2 eMMC HS200 mode
- sdhci-pci-o2micro: Add support for O2 hardware tuning
- sdhci-pci-o2micro: Add MSI interrupt support for O2 SD host
- sdhci-pci: Add support for Intel ICP
- sdhci-tegra: Prevent ACMD23 and HS200 mode on Tegra 3
- sdhci-tegra: Fix eMMC DDR52 mode
- sdhci-tegra: Improve clock management
- dw_mmc-rockchip: Document compatible string for px30
- sdhci-esdhc-imx: Add support for 3.3V eMMC DDR mode
- sdhci-of-esdhc: Set proper DMA mask for ls104x chips
- sdhci-of-esdhc: Improve clock management
- sdhci-of-arasan: Add a quirk to manage unstable clocks
- dw_mmc-exynos: Address potential external abort during system resume
- pxamci: Add support for common MMC DT bindings
- pxamci: Several cleanups and improvements
- pxamci: Merge immutable branch for pxa to switch to DMA slave maps"
* tag 'mmc-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (56 commits)
mmc: core: improve reasonableness of bus width setting for HS400es
mmc: tmio: remove unneeded variable in tmio_mmc_start_command()
mmc: renesas_sdhi: Fix sampling clock position selecting
mmc: tmio: Fix tuning flow
mmc: sunxi: remove output of virtual base address
dt-bindings: mmc: rockchip-dw-mshc: add description for px30
mmc: renesas_sdhi: Add r8a77990 support
mmc: sunxi: allow 3.3V DDR when DDR is available
mmc: mmci: Add and implement a ->dma_setup() callback for qcom dml
mmc: mmci: Initial support to manage variant specific callbacks
mmc: tegra: Force correct divider calculation on DDR50/52
mmc: sdhci: Add MSI interrupt support for O2 SD host
mmc: sdhci: Add support for O2 hardware tuning
mmc: sdhci: Export sdhci tuning function symbol
mmc: sdhci: Change O2 Host HS200 mode clock frequency to 200MHz
mmc: sdhci: Add support for O2 eMMC HS200 mode
mmc: tegra: Add and use tegra_sdhci_get_max_clock()
mmc: sdhci-esdhc-imx: fix indent
mmc: sdhci-esdhc-imx: disable clocks before changing frequency
mmc: tegra: prevent ACMD23 on Tegra 3
...
Haishuang Yan [Sat, 18 Aug 2018 14:43:48 +0000 (22:43 +0800)]
ip6_vti: simplify stats handling in vti6_xmit
Same as ip_vti, use iptunnel_xmit_stats to updates stats in tunnel xmit
code path.
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 18 Aug 2018 19:30:42 +0000 (12:30 -0700)]
pcmcia: remove long deprecated pcmcia_request_exclusive_irq() function
This function was created as a deprecated fallback case back in 2010 by
commit
eb14120f743d ("pcmcia: re-work pcmcia_request_irq()") for legacy
cases.
Actual in-kernel users haven't been around for a long while. The last
in-kernel user was apparently removed four years ago by commit
5f5316fcd08e ("am2150: Update nmclan_cs.c to use update PCMCIA API").
Just remove it entirely.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 18 Aug 2018 19:19:56 +0000 (12:19 -0700)]
deprecate the '__deprecated' attribute warnings entirely and for good
We haven't had lots of deprecation warnings lately, but the rdma use of
it made them flare up again.
They are not useful. They annoy everybody, and nobody ever does
anything about them, because it's always "somebody elses problem". And
when people start thinking that warnings are normal, they stop looking
at them, and the real warnings that mean something go unnoticed.
If you want to get rid of a function, just get rid of it. Convert every
user to the new world order.
And if you can't do that, then don't annoy everybody else with your
marking that says "I couldn't be bothered to fix this, so I'll just spam
everybody elses build logs with warnings about my laziness".
Make a kernelnewbies wiki page about things that could be cleaned up,
write a blog post about it, or talk to people on the mailing lists. But
don't add warnings to the kernel build about cleanup that you think
should happen but you aren't doing yourself.
Don't. Just don't.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 18 Aug 2018 18:44:53 +0000 (11:44 -0700)]
Merge tag 'driver-core-4.19-rc1' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are all of the driver core and related patches for 4.19-rc1.
Nothing huge here, just a number of small cleanups and the ability to
now stop the deferred probing after init happens.
All of these have been in linux-next for a while with only a merge
issue reported"
* tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits)
base: core: Remove WARN_ON from link dependencies check
drivers/base: stop new probing during shutdown
drivers: core: Remove glue dirs from sysfs earlier
driver core: remove unnecessary function extern declare
sysfs.h: fix non-kernel-doc comment
PM / Domains: Stop deferring probe at the end of initcall
iommu: Remove IOMMU_OF_DECLARE
iommu: Stop deferring probe at end of initcalls
pinctrl: Support stopping deferred probe after initcalls
dt-bindings: pinctrl: add a 'pinctrl-use-default' property
driver core: allow stopping deferred probe after init
driver core: add a debugfs entry to show deferred devices
sysfs: Fix internal_create_group() for named group updates
base: fix order of OF initialization
linux/device.h: fix kernel-doc notation warning
Documentation: update firmware loader fallback reference
kobject: Replace strncpy with memcpy
drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number
kernfs: Replace strncpy with memcpy
device: Add #define dev_fmt similar to #define pr_fmt
...
Linus Torvalds [Sat, 18 Aug 2018 18:04:51 +0000 (11:04 -0700)]
Merge tag 'char-misc-4.19-rc1' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the bit set of char/misc drivers for 4.19-rc1
There is a lot here, much more than normal, seems like everyone is
writing new driver subsystems these days... Anyway, major things here
are:
- new FSI driver subsystem, yet-another-powerpc low-level hardware
bus
- gnss, finally an in-kernel GPS subsystem to try to tame all of the
crazy out-of-tree drivers that have been floating around for years,
combined with some really hacky userspace implementations. This is
only for GNSS receivers, but you have to start somewhere, and this
is great to see.
Other than that, there are new slimbus drivers, new coresight drivers,
new fpga drivers, and loads of DT bindings for all of these and
existing drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
android: binder: Rate-limit debug and userspace triggered err msgs
fsi: sbefifo: Bump max command length
fsi: scom: Fix NULL dereference
misc: mic: SCIF Fix scif_get_new_port() error handling
misc: cxl: changed asterisk position
genwqe: card_base: Use true and false for boolean values
misc: eeprom: assignment outside the if statement
uio: potential double frees if __uio_register_device() fails
eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
misc: ti-st: Fix memory leak in the error path of probe()
android: binder: Show extra_buffers_size in trace
firmware: vpd: Fix section enabled flag on vpd_section_destroy
platform: goldfish: Retire pdev_bus
goldfish: Use dedicated macros instead of manual bit shifting
goldfish: Add missing includes to goldfish.h
mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
dt-bindings: mux: add adi,adgs1408
Drivers: hv: vmbus: Cleanup synic memory free path
Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
...
Linus Torvalds [Sat, 18 Aug 2018 18:00:00 +0000 (11:00 -0700)]
Merge tag 'staging-4.19-rc1' of git://git./linux/kernel/git/gregkh/staging
Pull staging and IIO updates from Greg KH:
"Here are the big staging/iio patches for 4.19-rc1.
Lots of churn here, with tons of cleanups happening in staging
drivers, a removal of an old crypto driver that no one was using
(skein), and the addition of some new IIO drivers. Also added was a
"gasket" driver from Google that needs loads of work and the erofs
filesystem.
Even with adding all of the new drivers and a new filesystem, we are
only adding about 1000 lines overall to the kernel linecount, which
shows just how much cleanup happened, and how big the unused crypto
driver was.
All of these have been in the linux-next tree for a while now with no
reported issues"
* tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (903 commits)
staging:rtl8192u: Remove unused macro definitions - Style
staging:rtl8192u: Add spaces around '+' operator - Style
staging:rtl8192u: Remove stale comment - Style
staging: rtl8188eu: remove unused mp_custom_oid.h
staging: fbtft: Add spaces around / - Style
staging: fbtft: Erases some repetitive usage of function name - Style
staging: fbtft: Adjust some empty-line problems - Style
staging: fbtft: Removes one nesting level to help readability - Style
staging: fbtft: Changes gamma table to define.
staging: fbtft: A bit more information on dev_err.
staging: fbtft: Fixes some alignment issues - Style
staging: fbtft: Puts macro arguments in parenthesis to avoid precedence issues - Style
staging: rtl8188eu: remove unused array dB_Invert_Table
staging: rtl8188eu: remove whitespace, add missing blank line
staging: rtl8188eu: use is_multicast_ether_addr in rtw_sta_mgt.c
staging: rtl8188eu: remove whitespace - style
staging: rtl8188eu: cleanup block comment - style
staging: rtl8188eu: use is_multicast_ether_addr in rtl8188eu_xmit.c
staging: rtl8188eu: use is_multicast_ether_addr in recv_linux.c
staging: rtlwifi: refactor rtl_get_tcb_desc
...
Linus Torvalds [Sat, 18 Aug 2018 17:50:41 +0000 (10:50 -0700)]
Merge tag 'tty-4.19-rc1' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big tty and serial driver pull request for 4.19-rc1.
It's not all that big, just a number of small serial driver updates
and fixes, along with some better vt handling for unicode characters
for those using braille terminals.
All of these patches have been in linux-next for a long time with no
reported issues"
* tag 'tty-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (73 commits)
tty: serial: 8250: Revert NXP SC16C2552 workaround
serial: 8250_exar: Read INT0 from slave device, too
tty: rocket: Fix possible buffer overwrite on register_PCI
serial: 8250_dw: Add ACPI support for uart on Broadcom SoC
serial: 8250_dw: always set baud rate in dw8250_set_termios
dt-bindings: serial: Add binding for uartlite
tty: serial: uartlite: Add support for suspend and resume
tty: serial: uartlite: Add clock adaptation
tty: serial: uartlite: Add structure for private data
serial: sh-sci: Improve support for separate TEI and DRI interrupts
serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE
serial: sh-sci: Allow for compressed SCIF address
serial: sh-sci: Improve interrupts description
serial: 8250: Use cached port name directly in messages
serial: 8250_exar: Drop unused variable in pci_xr17v35x_setup()
vt: drop unused struct vt_struct
vt: avoid a VLA in the unicode screen scroll function
vt: add /dev/vcsu* to devices.txt
vt: coherence validation code for the unicode screen buffer
vt: selection: take screen contents from uniscr if available
...
Linus Torvalds [Sat, 18 Aug 2018 17:21:49 +0000 (10:21 -0700)]
Merge tag 'usb-4.19-rc1' of git://git./linux/kernel/git/gregkh/usb
Pull USB/PHY updates from Greg KH:
"Here is the big USB and phy driver patch set for 4.19-rc1.
Nothing huge but there was a lot of work that happened this
development cycle:
- lots of type-c work, with drivers graduating out of staging, and
displayport support being added.
- new PHY drivers
- the normal collection of gadget driver updates and fixes
- code churn to work on the urb handling path, using irqsave()
everywhere in anticipation of making this codepath a lot simpler in
the future.
- usbserial driver fixes and reworks
- other misc changes
All of these have been in linux-next with no reported issues for a
while"
* tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits)
USB: serial: pl2303: add a new device id for ATEN
usb: renesas_usbhs: Kconfig: convert to SPDX identifiers
usb: dwc3: gadget: Check MaxPacketSize from descriptor
usb: dwc2: Turn on uframe_sched on "stm32f4x9_fsotg" platforms
usb: dwc2: Turn on uframe_sched on "amlogic" platforms
usb: dwc2: Turn on uframe_sched on "his" platforms
usb: dwc2: Turn on uframe_sched on "bcm" platforms
usb: dwc2: gadget: ISOC's starting flow improvement
usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.
usb: dwc3: core: Enable AutoRetry feature in the controller
usb: dwc3: Set default mode for dwc_usb31
usb: gadget: udc: renesas_usb3: Add register of usb role switch
usb: dwc2: replace ioread32/iowrite32_rep with dwc2_readl/writel_rep
usb: dwc2: Modify dwc2_readl/writel functions prototype
usb: dwc3: pci: Intel Merrifield can be host
usb: dwc3: pci: Supply device properties via driver data
arm64: dts: dwc3: description of incr burst type
usb: dwc3: Enable undefined length INCR burst type
usb: dwc3: add global soc bus configuration reg0
usb: dwc3: Describe 'wakeup_work' field of struct dwc3_pci
...
David S. Miller [Sat, 18 Aug 2018 17:02:49 +0000 (10:02 -0700)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2018-08-18
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a BPF selftest failure in test_cgroup_storage due to rlimit
restrictions, from Yonghong.
2) Fix a suspicious RCU rcu_dereference_check() warning triggered
from removing a device's XDP memory allocator by using the correct
rhashtable lookup function, from Tariq.
3) A batch of BPF sockmap and ULP fixes mainly fixing leaks and races
as well as enforcing module aliases for ULPs. Another fix for BPF
map redirect to make them work again with tail calls, from Daniel.
4) Fix XDP BPF samples to unload their programs upon SIGTERM, from Jesper.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 18 Aug 2018 16:59:19 +0000 (09:59 -0700)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for your net tree:
1) Infinite loop in IPVS when net namespace is released, from
Tan Hu.
2) Do not show negative timeouts in ip_vs_conn by using the new
jiffies_delta_to_msecs(), patches from Matteo Croce.
3) Set F_IFACE flag for linklocal addresses in ip6t_rpfilter,
from Florian Westphal.
4) Fix overflow in set size allocation, from Taehee Yoo.
5) Use netlink_dump_start() from ctnetlink to fix memleak from
the error path, again from Florian.
6) Register nfnetlink_subsys in last place, otherwise netns
init path may lose race and see net->nft uninitialized data.
This also reverts previous attempt to fix this by increase
netns refcount, patches from Florian.
7) Remove conntrack entries on layer 4 protocol tracker module
removal, from Florian.
8) Use GFP_KERNEL_ACCOUNT for xtables blob allocation, from
Michal Hocko.
9) Get tproxy documentation in sync with existing codebase,
from Mate Eckl.
10) Honor preset layer 3 protocol via ctx->family in the new nft_ct
timeout infrastructure, from Harsha Sharma.
11) Let uapi nfnetlink_osf.h compile standalone with no errors,
from Dmitry V. Levin.
12) Missing braces compilation warning in nft_tproxy, patch from
Mate Eclk.
13) Disregard bogus check to bail out on non-anonymous sets from
the dynamic set update extension.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 18 Aug 2018 00:27:58 +0000 (17:27 -0700)]
Merge tag '9p-for-4.19-2' of git://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
"This contains mostly fixes (6 to be backported to stable) and a few
changes, here is the breakdown:
- rework how fids are attributed by replacing some custom tracking in
a list by an idr
- for packet-based transports (virtio/rdma) validate that the packet
length matches what the header says
- a few race condition fixes found by syzkaller
- missing argument check when NULL device is passed in sys_mount
- a few virtio fixes
- some spelling and style fixes"
* tag '9p-for-4.19-2' of git://github.com/martinetd/linux: (21 commits)
net/9p/trans_virtio.c: add null terminal for mount tag
9p/virtio: fix off-by-one error in sg list bounds check
9p: fix whitespace issues
9p: fix multiple NULL-pointer-dereferences
fs/9p/xattr.c: catch the error of p9_client_clunk when setting xattr failed
9p: validate PDU length
net/9p/trans_fd.c: fix race by holding the lock
net/9p/trans_fd.c: fix race-condition by flushing workqueue before the kfree()
net/9p/virtio: Fix hard lockup in req_done
net/9p/trans_virtio.c: fix some spell mistakes in comments
9p/net: Fix zero-copy path in the 9p virtio transport
9p: Embed wait_queue_head into p9_req_t
9p: Replace the fidlist with an IDR
9p: Change p9_fid_create calling convention
9p: Fix comment on smp_wmb
net/9p/client.c: version pointer uninitialized
fs/9p/v9fs.c: fix spelling mistake "Uknown" -> "Unknown"
net/9p: fix error path of p9_virtio_probe
9p/net/protocol.c: return -ENOMEM when kmalloc() failed
net/9p/client.c: add missing '\n' at the end of p9_debug()
...
Linus Torvalds [Fri, 17 Aug 2018 23:49:31 +0000 (16:49 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:
- a few misc things
- a few Y2038 fixes
- ntfs fixes
- arch/sh tweaks
- ocfs2 updates
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits)
mm/hmm.c: remove unused variables align_start and align_end
fs/userfaultfd.c: remove redundant pointer uwq
mm, vmacache: hash addresses based on pmd
mm/list_lru: introduce list_lru_shrink_walk_irq()
mm/list_lru.c: pass struct list_lru_node* as an argument to __list_lru_walk_one()
mm/list_lru.c: move locking from __list_lru_walk_one() to its caller
mm/list_lru.c: use list_lru_walk_one() in list_lru_walk_node()
mm, swap: make CONFIG_THP_SWAP depend on CONFIG_SWAP
mm/sparse: delete old sparse_init and enable new one
mm/sparse: add new sparse_init_nid() and sparse_init()
mm/sparse: move buffer init/fini to the common place
mm/sparse: use the new sparse buffer functions in non-vmemmap
mm/sparse: abstract sparse buffer allocations
mm/hugetlb.c: don't zero 1GiB bootmem pages
mm, page_alloc: double zone's batchsize
mm/oom_kill.c: document oom_lock
mm/hugetlb: remove gigantic page support for HIGHMEM
mm, oom: remove sleep from under oom_lock
kernel/dma: remove unsupported gfp_mask parameter from dma_alloc_from_contiguous()
mm/cma: remove unsupported gfp_mask parameter from cma_alloc()
...
Colin Ian King [Fri, 17 Aug 2018 22:50:07 +0000 (15:50 -0700)]
mm/hmm.c: remove unused variables align_start and align_end
Variables align_start and align_end are being assigned but are never
used hence they are redundant and can be removed.
Cleans up clang warnings:
warning: variable 'align_start' set but not used [-Wunused-but-set-variable]
warning: variable 'align_size' set but not used [-Wunused-but-set-variable]
Link: http://lkml.kernel.org/r/20180714161124.3923-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Colin Ian King [Fri, 17 Aug 2018 22:50:01 +0000 (15:50 -0700)]
fs/userfaultfd.c: remove redundant pointer uwq
Pointer uwq is being assigned but is never used hence it is redundant
and can be removed.
Cleans up clang warning:
warning: variable 'uwq' set but not used [-Wunused-but-set-variable]
Link: http://lkml.kernel.org/r/20180717090802.18357-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes [Fri, 17 Aug 2018 22:49:58 +0000 (15:49 -0700)]
mm, vmacache: hash addresses based on pmd
When perf profiling a wide variety of different workloads, it was found
that vmacache_find() had higher than expected cost: up to 0.08% of cpu
utilization in some cases. This was found to rival other core VM
functions such as alloc_pages_vma() with thp enabled and default
mempolicy, and the conditionals in __get_vma_policy().
VMACACHE_HASH() determines which of the four per-task_struct slots a vma
is cached for a particular address. This currently depends on the pfn,
so pfn 5212 occupies a different vmacache slot than its neighboring pfn
5213.
vmacache_find() iterates through all four of current's vmacache slots
when looking up an address. Hashing based on pfn, an address has
~1/VMACACHE_SIZE chance of being cached in the first vmacache slot, or
about 25%, *if* the vma is cached.
This patch hashes an address by its pmd instead of pte to optimize for
workloads with good spatial locality. This results in a higher
probability of vmas being cached in the first slot that is checked:
normally ~70% on the same workloads instead of 25%.
[rientjes@google.com: various updates]
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1807231532290.109445@chino.kir.corp.google.com
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1807091749150.114630@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sebastian Andrzej Siewior [Fri, 17 Aug 2018 22:49:55 +0000 (15:49 -0700)]
mm/list_lru: introduce list_lru_shrink_walk_irq()
Provide list_lru_shrink_walk_irq() and let it behave like
list_lru_walk_one() except that it locks the spinlock with
spin_lock_irq(). This is used by scan_shadow_nodes() because its lock
nests within the i_pages lock which is acquired with IRQ. This change
allows to use proper locking promitives instead hand crafted
lock_irq_disable() plus spin_lock().
There is no EXPORT_SYMBOL provided because the current user is in-kernel
only.
Add list_lru_shrink_walk_irq() which acquires the spinlock with the
proper locking primitives.
Link: http://lkml.kernel.org/r/20180716111921.5365-5-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sebastian Andrzej Siewior [Fri, 17 Aug 2018 22:49:51 +0000 (15:49 -0700)]
mm/list_lru.c: pass struct list_lru_node* as an argument to __list_lru_walk_one()
__list_lru_walk_one() is invoked with struct list_lru *lru, int nid as
the first two argument. Those two are only used to retrieve struct
list_lru_node. Since this is already done by the caller of the function
for the locking, we can pass struct list_lru_node* directly and avoid
the dance around it.
Link: http://lkml.kernel.org/r/20180716111921.5365-4-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sebastian Andrzej Siewior [Fri, 17 Aug 2018 22:49:48 +0000 (15:49 -0700)]
mm/list_lru.c: move locking from __list_lru_walk_one() to its caller
Move the locking inside __list_lru_walk_one() to its caller. This is a
preparation step in order to introduce list_lru_walk_one_irq() which
does spin_lock_irq() instead of spin_lock() for the locking.
Link: http://lkml.kernel.org/r/20180716111921.5365-3-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sebastian Andrzej Siewior [Fri, 17 Aug 2018 22:49:45 +0000 (15:49 -0700)]
mm/list_lru.c: use list_lru_walk_one() in list_lru_walk_node()
Patch series "mm/list_lru: Add list_lru_shrink_walk_irq() and a user".
This series removes the local_irq_disable() around
list_lru_shrink_walk() (as used by mm/workingset) by adding
list_lru_shrink_walk_irq().
Vladimir Davydov preferred this over `irq' argument which I added to
struct list_lru.
The initial post (of this series) received a Reviewed-by tag by Vladimir
Davydov which I added to each patch of the series. The series applies
on top of akpm's tree which has Kirill's shrink_slab series and does not
clash with it (akpm asked me to wait a week or so and repost it then).
I tested the code paths by triggering the OOM-killer via memory over
commit and lockdep did not complain (nor did I see any warnings).
This patch (of 4):
list_lru_walk_node() invokes __list_lru_walk_one() with -1 as the
memcg_idx parameter. The same can be achieved by list_lru_walk_one() and
passing NULL as memcg argument which then gets converted into -1. This is
a preparation step when the spin_lock() function is lifted to the caller
of __list_lru_walk_one(). Invoke list_lru_walk_one() instead
__list_lru_walk_one() when possible.
Link: http://lkml.kernel.org/r/20180716111921.5365-2-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Huang Ying [Fri, 17 Aug 2018 22:49:41 +0000 (15:49 -0700)]
mm, swap: make CONFIG_THP_SWAP depend on CONFIG_SWAP
CONFIG_THP_SWAP should depend on CONFIG_SWAP, because it's unreasonable
to optimize swapping for THP (Transparent Huge Page) without basic
swapping support.
In original code, when CONFIG_SWAP=n and CONFIG_THP_SWAP=y,
split_swap_cluster() will not be built because it is in swapfile.c, but
it will be called in huge_memory.c. This doesn't trigger a build error
in practice because the call site is enclosed by PageSwapCache(), which
is defined to be constant 0 when CONFIG_SWAP=n. But this is fragile and
should be fixed.
The comments are fixed too to reflect the latest progress.
Link: http://lkml.kernel.org/r/20180713021228.439-1-ying.huang@intel.com
Fixes:
38d8b4e6bdc8 ("mm, THP, swap: delay splitting THP during swap out")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Tatashin [Fri, 17 Aug 2018 22:49:37 +0000 (15:49 -0700)]
mm/sparse: delete old sparse_init and enable new one
Rename new_sparse_init() to sparse_init() which enables it. Delete old
sparse_init() and all the code that became obsolete with.
[pasha.tatashin@oracle.com: remove unused sparse_mem_maps_populate_node()]
Link: http://lkml.kernel.org/r/20180716174447.14529-6-pasha.tatashin@oracle.com
Link: http://lkml.kernel.org/r/20180712203730.8703-6-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Tested-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Tatashin [Fri, 17 Aug 2018 22:49:33 +0000 (15:49 -0700)]
mm/sparse: add new sparse_init_nid() and sparse_init()
sparse_init() requires to temporary allocate two large buffers: usemap_map
and map_map. Baoquan He has identified that these buffers are so large
that Linux is not bootable on small memory machines, such as a kdump boot.
The buffers are especially large when CONFIG_X86_5LEVEL is set, as they
are scaled to the maximum physical memory size.
Baoquan provided a fix, which reduces these sizes of these buffers, but it
is much better to get rid of them entirely.
Add a new way to initialize sparse memory: sparse_init_nid(), which only
operates within one memory node, and thus allocates memory either in large
contiguous block or allocates section by section. This eliminates the
need for use of temporary buffers.
For simplified bisecting and review temporarly call sparse_init()
new_sparse_init(), the new interface is going to be enabled as well as old
code removed in the next patch.
Link: http://lkml.kernel.org/r/20180712203730.8703-5-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Tested-by: Oscar Salvador <osalvador@suse.de>
Tested-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Tatashin [Fri, 17 Aug 2018 22:49:30 +0000 (15:49 -0700)]
mm/sparse: move buffer init/fini to the common place
Now that both variants of sparse memory use the same buffers to populate
memory map, we can move sparse_buffer_init()/sparse_buffer_fini() to the
common place.
Link: http://lkml.kernel.org/r/20180712203730.8703-4-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Tested-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Tatashin [Fri, 17 Aug 2018 22:49:26 +0000 (15:49 -0700)]
mm/sparse: use the new sparse buffer functions in non-vmemmap
non-vmemmap sparse also allocated large contiguous chunk of memory, and if
fails falls back to smaller allocations. Use the same functions to
allocate buffer as the vmemmap-sparse
Link: http://lkml.kernel.org/r/20180712203730.8703-3-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Tested-by: Oscar Salvador <osalvador@suse.de>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Tatashin [Fri, 17 Aug 2018 22:49:21 +0000 (15:49 -0700)]
mm/sparse: abstract sparse buffer allocations
Patch series "sparse_init rewrite", v6.
In sparse_init() we allocate two large buffers to temporary hold usemap
and memmap for the whole machine. However, we can avoid doing that if
we changed sparse_init() to operated on per-node bases instead of doing
it on the whole machine beforehand.
As shown by Baoquan
http://lkml.kernel.org/r/
20180628062857.29658-1-bhe@redhat.com
The buffers are large enough to cause machine stop to boot on small
memory systems.
Another benefit of these changes is that they also obsolete
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER.
This patch (of 5):
When struct pages are allocated for sparse-vmemmap VA layout, we first try
to allocate one large buffer, and than if that fails allocate struct pages
for each section as we go.
The code that allocates buffer is uses global variables and is spread
across several call sites.
Cleanup the code by introducing three functions to handle the global
buffer:
sparse_buffer_init() initialize the buffer
sparse_buffer_fini() free the remaining part of the buffer
sparse_buffer_alloc() alloc from the buffer, and if buffer is empty
return NULL
Define these functions in sparse.c instead of sparse-vmemmap.c because
later we will use them for non-vmemmap sparse allocations as well.
[akpm@linux-foundation.org: use PTR_ALIGN()]
[akpm@linux-foundation.org: s/BUG_ON/WARN_ON/]
Link: http://lkml.kernel.org/r/20180712203730.8703-2-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Tested-by: Oscar Salvador <osalvador@suse.de>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cannon Matthews [Fri, 17 Aug 2018 22:49:17 +0000 (15:49 -0700)]
mm/hugetlb.c: don't zero 1GiB bootmem pages
When using 1GiB pages during early boot, use the new
memblock_virt_alloc_try_nid_raw() to allocate memory without zeroing it.
Zeroing out hundreds or thousands of GiB in a single core memset() call
is very slow, and can make early boot last upwards of 20-30 minutes on
multi TiB machines.
The memory does not need to be zero'd as the hugetlb pages are always
zero'd on page fault.
Tested: Booted with ~3800 1G pages, and it booted successfully in
roughly the same amount of time as with 0, as opposed to the 25+ minutes
it would take before.
Link: http://lkml.kernel.org/r/20180711213313.92481-1-cannonmatthews@google.com
Signed-off-by: Cannon Matthews <cannonmatthews@google.com>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Aaron Lu [Fri, 17 Aug 2018 22:49:14 +0000 (15:49 -0700)]
mm, page_alloc: double zone's batchsize
To improve page allocator's performance for order-0 pages, each CPU has
a Per-CPU-Pageset(PCP) per zone. Whenever an order-0 page is needed,
PCP will be checked first before asking pages from Buddy. When PCP is
used up, a batch of pages will be fetched from Buddy to improve
performance and the size of batch can affect performance.
zone's batch size gets doubled last time by commit
ba56e91c9401("mm:
page_alloc: increase size of per-cpu-pages") over ten years ago. Since
then, CPU has envolved a lot and CPU's cache sizes also increased.
Dave Hansen is concerned the current batch size doesn't fit well with
modern hardware and suggested me to do two things: first, use a page
allocator intensive benchmark, e.g. will-it-scale/page_fault1 to find
out how performance changes with different batch sizes on various
machines and then choose a new default batch size; second, see how this
new batch size work with other workloads.
In the first test, we saw performance gains on high-core-count systems
and little to no effect on older systems with more modest core counts.
In this phase's test data, two candidates: 63 and 127 are chosen.
In the second step, ebizzy, oltp, kbuild, pigz, netperf, vm-scalability
and more will-it-scale sub-tests are tested to see how these two
candidates work with these workloads and decides a new default according
to their results.
Most test results are flat. will-it-scale/page_fault2 process mode has
10%-18% performance increase on 4-sockets Skylake and Broadwell.
vm-scalability/lru-file-mmap-read has 17%-47% performance increase for
4-sockets servers while for 2-sockets servers, it caused 3%-8% performance
drop. Further analysis showed that, with a larger pcp->batch and thus
larger pcp->high(the relationship of pcp->high=6 * pcp->batch is
maintained in this patch), zone lock contention shifted to LRU add side
lock contention and that caused performance drop. This performance drop
might be mitigated by others' work on optimizing LRU lock.
Another downside of increasing pcp->batch is, when PCP is used up and need
to fetch a batch of pages from Buddy, since batch is increased, that time
can be longer than before. My understanding is, this doesn't affect
slowpath where direct reclaim and compaction dominates. For fastpath,
throughput is a win(according to will-it-scale/page_fault1) but worst
latency can be larger now.
Overall, I think double the batch size from 31 to 63 is relatively safe
and provide good performance boost for high-core-count systems.
The two phase's test results are listed below(all tests are done with THP
disabled).
Phase one(will-it-scale/page_fault1) test results:
Skylake-EX: increased batch size has a good effect on zone->lock
contention, though LRU contention will rise at the same time and
limited the final performance increase.
batch score change zone_contention lru_contention total_contention
31
15345900 +0.00% 64% 8% 72%
53
17903847 +16.67% 32% 38% 70%
63
17992886 +17.25% 24% 45% 69%
73
18022825 +17.44% 10% 61% 71%
119
18023401 +17.45% 4% 66% 70%
127
18029012 +17.48% 3% 66% 69%
137
18036075 +17.53% 4% 66% 70%
165
18035964 +17.53% 2% 67% 69%
188
18101105 +17.95% 2% 67% 69%
223
18130951 +18.15% 2% 67% 69%
255
18118898 +18.07% 2% 67% 69%
267
18101559 +17.96% 2% 67% 69%
299
18160468 +18.34% 2% 68% 70%
320
18139845 +18.21% 2% 67% 69%
393
18160869 +18.34% 2% 68% 70%
424
18170999 +18.41% 2% 68% 70%
458
18144868 +18.24% 2% 68% 70%
467
18142366 +18.22% 2% 68% 70%
498
18154549 +18.30% 1% 68% 69%
511
18134525 +18.17% 1% 69% 70%
Broadwell-EX: similar pattern as Skylake-EX.
batch score change zone_contention lru_contention total_contention
31
16703983 +0.00% 67% 7% 74%
53
18195393 +8.93% 43% 28% 71%
63
18288885 +9.49% 38% 33% 71%
73
18344329 +9.82% 35% 37% 72%
119
18535529 +10.96% 24% 46% 70%
127
18513596 +10.83% 23% 48% 71%
137
18514327 +10.84% 23% 48% 71%
165
18511840 +10.82% 22% 49% 71%
188
18593478 +11.31% 17% 53% 70%
223
18601667 +11.36% 17% 52% 69%
255
18774825 +12.40% 12% 58% 70%
267
18754781 +12.28% 9% 60% 69%
299
18892265 +13.10% 7% 63% 70%
320
18873812 +12.99% 8% 62% 70%
393
18891174 +13.09% 6% 64% 70%
424
18975108 +13.60% 6% 64% 70%
458
18932364 +13.34% 8% 62% 70%
467
18960891 +13.51% 5% 65% 70%
498
18944526 +13.41% 5% 64% 69%
511
18960839 +13.51% 5% 64% 69%
Skylake-EP: although increased batch reduced zone->lock contention, but
the effect is not as good as EX: zone->lock contention is still as high as
20% with a very high batch value instead of 1% on Skylake-EX or 5% on
Broadwell-EX. Also, total_contention actually decreased with a higher
batch but that doesn't translate to performance increase.
batch score change zone_contention lru_contention total_contention
31 9554867 +0.00% 66% 3% 69%
53 9855486 +3.15% 63% 3% 66%
63 9980145 +4.45% 62% 4% 66%
73
10092774 +5.63% 62% 5% 67%
119
10310061 +7.90% 45% 19% 64%
127
10342019 +8.24% 42% 19% 61%
137
10358182 +8.41% 42% 21% 63%
165
10397060 +8.81% 37% 24% 61%
188
10341808 +8.24% 34% 26% 60%
223
10349135 +8.31% 31% 27% 58%
255
10327189 +8.08% 28% 29% 57%
267
10344204 +8.26% 27% 29% 56%
299
10325043 +8.06% 25% 30% 55%
320
10310325 +7.91% 25% 31% 56%
393
10293274 +7.73% 21% 31% 52%
424
10311099 +7.91% 21% 32% 53%
458
10321375 +8.02% 21% 32% 53%
467
10303881 +7.84% 21% 32% 53%
498
10332462 +8.14% 20% 33% 53%
511
10325016 +8.06% 20% 32% 52%
Broadwell-EP: zone->lock and lru lock had an agreement to make sure
performance doesn't increase and they successfully managed to keep total
contention at 70%.
batch score change zone_contention lru_contention total_contention
31
10121178 +0.00% 19% 50% 69%
53
10142366 +0.21% 6% 63% 69%
63
10117984 -0.03% 11% 58% 69%
73
10123330 +0.02% 7% 63% 70%
119
10108791 -0.12% 2% 67% 69%
127
10166074 +0.44% 3% 66% 69%
137
10141574 +0.20% 3% 66% 69%
165
10154499 +0.33% 2% 68% 70%
188
10124921 +0.04% 2% 67% 69%
223
10137399 +0.16% 2% 67% 69%
255
10143289 +0.22% 0% 68% 68%
267
10123535 +0.02% 1% 68% 69%
299
10140952 +0.20% 0% 68% 68%
320
10163170 +0.41% 0% 68% 68%
393
10000633 -1.19% 0% 69% 69%
424
10087998 -0.33% 0% 69% 69%
458
10187116 +0.65% 0% 69% 69%
467
10146790 +0.25% 0% 69% 69%
498
10197958 +0.76% 0% 69% 69%
511
10152326 +0.31% 0% 69% 69%
Haswell-EP: similar to Broadwell-EP.
batch score change zone_contention lru_contention total_contention
31
10442205 +0.00% 14% 48% 62%
53
10442255 +0.00% 5% 57% 62%
63
10452059 +0.09% 6% 57% 63%
73
10482349 +0.38% 5% 59% 64%
119
10454644 +0.12% 3% 60% 63%
127
10431514 -0.10% 3% 59% 62%
137
10423785 -0.18% 3% 60% 63%
165
10481216 +0.37% 2% 61% 63%
188
10448755 +0.06% 2% 61% 63%
223
10467144 +0.24% 2% 61% 63%
255
10480215 +0.36% 2% 61% 63%
267
10484279 +0.40% 2% 61% 63%
299
10466450 +0.23% 2% 61% 63%
320
10452578 +0.10% 2% 61% 63%
393
10499678 +0.55% 1% 62% 63%
424
10481454 +0.38% 1% 62% 63%
458
10473562 +0.30% 1% 62% 63%
467
10484269 +0.40% 0% 62% 62%
498
10505599 +0.61% 0% 62% 62%
511
10483395 +0.39% 0% 62% 62%
Westmere-EP: contention is pretty small so not interesting. Note too high
a batch value could hurt performance.
batch score change zone_contention lru_contention total_contention
31 4831523 +0.00% 2% 3% 5%
53 4834086 +0.05% 2% 4% 6%
63 4834262 +0.06% 2% 3% 5%
73 4832851 +0.03% 2% 4% 6%
119 4830534 -0.02% 1% 3% 4%
127 4827461 -0.08% 1% 4% 5%
137 4827459 -0.08% 1% 3% 4%
165 4820534 -0.23% 0% 4% 4%
188 4817947 -0.28% 0% 3% 3%
223 4809671 -0.45% 0% 3% 3%
255 4802463 -0.60% 0% 4% 4%
267 4801634 -0.62% 0% 3% 3%
299 4798047 -0.69% 0% 3% 3%
320 4793084 -0.80% 0% 3% 3%
393 4785877 -0.94% 0% 3% 3%
424 4782911 -1.01% 0% 3% 3%
458 4779346 -1.08% 0% 3% 3%
467 4780306 -1.06% 0% 3% 3%
498 4780589 -1.05% 0% 3% 3%
511 4773724 -1.20% 0% 3% 3%
Skylake-Desktop: similar to Westmere-EP, nothing interesting.
batch score change zone_contention lru_contention total_contention
31 3906608 +0.00% 2% 3% 5%
53 3940164 +0.86% 2% 3% 5%
63 3937289 +0.79% 2% 3% 5%
73 3940201 +0.86% 2% 3% 5%
119 3933240 +0.68% 2% 3% 5%
127 3930514 +0.61% 2% 4% 6%
137 3938639 +0.82% 0% 3% 3%
165 3908755 +0.05% 0% 3% 3%
188 3905621 -0.03% 0% 3% 3%
223 3903015 -0.09% 0% 4% 4%
255 3889480 -0.44% 0% 3% 3%
267 3891669 -0.38% 0% 4% 4%
299 3898728 -0.20% 0% 4% 4%
320 3894547 -0.31% 0% 4% 4%
393 3875137 -0.81% 0% 4% 4%
424 3874521 -0.82% 0% 3% 3%
458 3880432 -0.67% 0% 4% 4%
467 3888715 -0.46% 0% 3% 3%
498 3888633 -0.46% 0% 4% 4%
511 3875305 -0.80% 0% 5% 5%
Haswell-Desktop: zone->lock is pretty low as other desktops, though lru
contention is higher than other desktops.
batch score change zone_contention lru_contention total_contention
31 3511158 +0.00% 2% 5% 7%
53 3555445 +1.26% 2% 6% 8%
63 3561082 +1.42% 2% 6% 8%
73 3547218 +1.03% 2% 6% 8%
119 3571319 +1.71% 1% 7% 8%
127 3549375 +1.09% 0% 6% 6%
137 3560233 +1.40% 0% 6% 6%
165 3555176 +1.25% 2% 6% 8%
188 3551501 +1.15% 0% 8% 8%
223 3531462 +0.58% 0% 7% 7%
255 3570400 +1.69% 0% 7% 7%
267 3532235 +0.60% 1% 8% 9%
299 3562326 +1.46% 0% 6% 6%
320 3553569 +1.21% 0% 8% 8%
393 3539519 +0.81% 0% 7% 7%
424 3549271 +1.09% 0% 8% 8%
458 3528885 +0.50% 0% 8% 8%
467 3526554 +0.44% 0% 7% 7%
498 3525302 +0.40% 0% 9% 9%
511 3527556 +0.47% 0% 8% 8%
Sandybridge-Desktop: the 0% contention isn't accurate but caused by
dropped fractional part. Since multiple contention path's contentions
are all under 1% here, with some arithmetic operations like add, the
final deviation could be as large as 3%.
batch score change zone_contention lru_contention total_contention
31 1744495 +0.00% 0% 0% 0%
53 1755341 +0.62% 0% 0% 0%
63 1758469 +0.80% 0% 0% 0%
73 1759626 +0.87% 0% 0% 0%
119 1770417 +1.49% 0% 0% 0%
127 1768252 +1.36% 0% 0% 0%
137 1767848 +1.34% 0% 0% 0%
165 1765088 +1.18% 0% 0% 0%
188 1766918 +1.29% 0% 0% 0%
223 1767866 +1.34% 0% 0% 0%
255 1768074 +1.35% 0% 0% 0%
267 1763187 +1.07% 0% 0% 0%
299 1765620 +1.21% 0% 0% 0%
320 1767603 +1.32% 0% 0% 0%
393 1764612 +1.15% 0% 0% 0%
424 1758476 +0.80% 0% 0% 0%
458 1758593 +0.81% 0% 0% 0%
467 1757915 +0.77% 0% 0% 0%
498 1753363 +0.51% 0% 0% 0%
511 1755548 +0.63% 0% 0% 0%
Phase two test results:
Note: all percent change is against base(batch=31).
ebizzy.throughput (higer is better)
machine batch=31 batch=63 batch=127
lkp-skl-4sp1 2410037±7% 2600451±2% +7.9% 2602878 +8.0%
lkp-bdw-ex1 1493328 1489243 -0.3% 1492145 -0.1%
lkp-skl-2sp2 1329674 1345891 +1.2% 1351056 +1.6%
lkp-bdw-ep2 711511 711511 0.0% 710708 -0.1%
lkp-wsm-ep2 75750 75528 -0.3% 75441 -0.4%
lkp-skl-d01 264126 262791 -0.5% 264113 +0.0%
lkp-hsw-d01 176601 176328 -0.2% 176368 -0.1%
lkp-sb02 98937 98937 +0.0% 99030 +0.1%
kbuild.buildtime (less is better)
machine batch=31 batch=63 batch=127
lkp-skl-4sp1 107.00 107.67 +0.6% 107.11 +0.1%
lkp-bdw-ex1 97.33 97.33 +0.0% 97.42 +0.1%
lkp-skl-2sp2 180.00 179.83 -0.1% 179.83 -0.1%
lkp-bdw-ep2 178.17 179.17 +0.6% 177.50 -0.4%
lkp-wsm-ep2 737.00 738.00 +0.1% 738.00 +0.1%
lkp-skl-d01 642.00 653.00 +1.7% 653.00 +1.7%
lkp-hsw-d01 1310.00 1316.00 +0.5% 1311.00 +0.1%
netperf/TCP_STREAM.Throughput_total_Mbps (higher is better)
machine batch=31 batch=63 batch=127
lkp-skl-4sp1 948790 947144 -0.2% 948333 -0.0%
lkp-bdw-ex1 904224 904366 +0.0% 904926 +0.1%
lkp-skl-2sp2 239731 239607 -0.1% 239565 -0.1%
lk-bdw-ep2 365764 365933 +0.0% 365951 +0.1%
lkp-wsm-ep2 93736 93803 +0.1% 93808 +0.1%
lkp-skl-d01 77314 77303 -0.0% 77375 +0.1%
lkp-hsw-d01 58617 60387 +3.0% 60208 +2.7%
lkp-sb02 29990 30137 +0.5% 30103 +0.4%
oltp.transactions (higer is better)
machine batch=31 batch=63 batch=127
lkp-bdw-ex1 9073276 9100377 +0.3% 9036344 -0.4%
lkp-skl-2sp2 8898717 8852054 -0.5% 8894459 -0.0%
lkp-bdw-ep2
13426155 13384654 -0.3%
13333637 -0.7%
lkp-hsw-ep2
13146314 13232784 +0.7%
13193163 +0.4%
lkp-wsm-ep2 5035355 5019348 -0.3% 5033418 -0.0%
lkp-skl-d01 418485 4413339 -0.1% 4419039 +0.0%
lkp-hsw-d01 3517817±5% 3396120±3% -3.5% 3455138±3% -1.8%
pigz.throughput (higer is better)
machine batch=31 batch=63 batch=127
lkp-skl-4sp1 1.513e+08 1.507e+08 -0.4% 1.511e+08 -0.2%
lkp-bdw-ex1 2.060e+08 2.052e+08 -0.4% 2.044e+08 -0.8%
lkp-skl-2sp2 8.836e+08 8.845e+08 +0.1% 8.836e+08 -0.0%
lkp-bdw-ep2 8.275e+08 8.464e+08 +2.3% 8.330e+08 +0.7%
lkp-wsm-ep2 2.224e+08 2.221e+08 -0.2% 2.218e+08 -0.3%
lkp-skl-d01 1.177e+08 1.177e+08 -0.0% 1.176e+08 -0.1%
lkp-hsw-d01 1.154e+08 1.154e+08 +0.1% 1.154e+08 -0.0%
lkp-sb02 0.633e+08 0.633e+08 +0.1% 0.633e+08 +0.0%
will-it-scale.malloc1.processes (higher is better)
machine batch=31 batch=63 batch=127
lkp-skl-4sp1 620181 620484 +0.0% 620240 +0.0%
lkp-bdw-ex1 1403610 1401201 -0.2% 1417900 +1.0%
lkp-skl-2sp2 1288097 1284145 -0.3% 1283907 -0.3%
lkp-bdw-ep2 1427879 1427675 -0.0% 1428266 +0.0%
lkp-hsw-ep2 1362546 1353965 -0.6% 1354759 -0.6%
lkp-wsm-ep2 2099657 2107576 +0.4% 2100226 +0.0%
lkp-skl-d01 1476835 1476358 -0.0% 1474487 -0.2%
lkp-hsw-d01 1308810 1303429 -0.4% 1301299 -0.6%
lkp-sb02 589286 589284 -0.0% 588101 -0.2%
will-it-scale.malloc1.threads (higher is better)
machine batch=31 batch=63 batch=127
lkp-skl-4sp1 21289 21125 -0.8% 21241 -0.2%
lkp-bdw-ex1 28114 28089 -0.1% 28007 -0.4%
lkp-skl-2sp2 91866 91946 +0.1% 92723 +0.9%
lkp-bdw-ep2 37637 37501 -0.4% 37317 -0.9%
lkp-hsw-ep2 43673 43590 -0.2% 43754 +0.2%
lkp-wsm-ep2 28577 28298 -1.0% 28545 -0.1%
lkp-skl-d01 175277 173343 -1.1% 173082 -1.3%
lkp-hsw-d01 130303 129566 -0.6% 129250 -0.8%
lkp-sb02 113742±3% 116911 +2.8% 116417±3% +2.4%
will-it-scale.malloc2.processes (higer is better)
machine batch=31 batch=63 batch=127
lkp-skl-4sp1 1.206e+09 1.206e+09 -0.0% 1.206e+09 +0.0%
lkp-bdw-ex1 1.319e+09 1.319e+09 -0.0% 1.319e+09 +0.0%
lkp-skl-2sp2 8.000e+08 8.021e+08 +0.3% 7.995e+08 -0.1%
lkp-bdw-ep2 6.582e+08 6.634e+08 +0.8% 6.513e+08 -1.1%
lkp-hsw-ep2 6.671e+08 6.669e+08 -0.0% 6.665e+08 -0.1%
lkp-wsm-ep2 1.805e+08 1.806e+08 +0.0% 1.804e+08 -0.1%
lkp-skl-d01 1.611e+08 1.611e+08 -0.0% 1.610e+08 -0.0%
lkp-hsw-d01 1.333e+08 1.332e+08 -0.0% 1.332e+08 -0.0%
lkp-sb02
82485104 82478206 -0.0%
82473546 -0.0%
will-it-scale.malloc2.threads (higer is better)
machine batch=31 batch=63 batch=127
lkp-skl-4sp1 1.574e+09 1.574e+09 -0.0% 1.574e+09 -0.0%
lkp-bdw-ex1 1.737e+09 1.737e+09 +0.0% 1.737e+09 -0.0%
lkp-skl-2sp2 9.161e+08 9.162e+08 +0.0% 9.181e+08 +0.2%
lkp-bdw-ep2 7.856e+08 8.015e+08 +2.0% 8.113e+08 +3.3%
lkp-hsw-ep2 6.908e+08 6.904e+08 -0.1% 6.907e+08 -0.0%
lkp-wsm-ep2 2.409e+08 2.409e+08 +0.0% 2.409e+08 -0.0%
lkp-skl-d01 1.199e+08 1.199e+08 -0.0% 1.199e+08 -0.0%
lkp-hsw-d01 1.029e+08 1.029e+08 -0.0% 1.029e+08 +0.0%
lkp-sb02
68081213 68061423 -0.0%
68076037 -0.0%
will-it-scale.page_fault2.processes (higer is better)
machine batch=31 batch=63 batch=127
lkp-skl-4sp1
14509125±4%
16472364 +13.5%
17123117 +18.0%
lkp-bdw-ex1
14736381 16196588 +9.9%
16364011 +11.0%
lkp-skl-2sp2 6354925 6435444 +1.3% 6436644 +1.3%
lkp-bdw-ep2 8749584 8834422 +1.0% 8827179 +0.9%
lkp-hsw-ep2 8762591 8845920 +1.0% 8825697 +0.7%
lkp-wsm-ep2 3036083 3030428 -0.2% 3021741 -0.5%
lkp-skl-d01 2307834 2304731 -0.1% 2286142 -0.9%
lkp-hsw-d01 1806237 1800786 -0.3% 1795943 -0.6%
lkp-sb02 842616 837844 -0.6% 833921 -1.0%
will-it-scale.page_fault2.threads
machine batch=31 batch=63 batch=127
lkp-skl-4sp1 1623294 1615132±2% -0.5% 1656777 +2.1%
lkp-bdw-ex1 1995714 2025948 +1.5% 2113753±3% +5.9%
lkp-skl-2sp2 2346708 2415591 +2.9% 2416919 +3.0%
lkp-bdw-ep2 2342564 2344882 +0.1% 2300206 -1.8%
lkp-hsw-ep2 1820658 1831681 +0.6% 1844057 +1.3%
lkp-wsm-ep2 1725482 1733774 +0.5% 1740517 +0.9%
lkp-skl-d01 1832833 1823628 -0.5% 1806489 -1.4%
lkp-hsw-d01 1427913 1427287 -0.0% 1420226 -0.5%
lkp-sb02 750626 748615 -0.3% 746621 -0.5%
will-it-scale.page_fault3.processes (higher is better)
machine batch=31 batch=63 batch=127
lkp-skl-4sp1
24382726 24400317 +0.1%
24668774 +1.2%
lkp-bdw-ex1
35399750 35683124 +0.8%
35829492 +1.2%
lkp-skl-2sp2
28136820 28068248 -0.2%
28147989 +0.0%
lkp-bdw-ep2
37269077 37459490 +0.5%
37373073 +0.3%
lkp-hsw-ep2
36224967 36114085 -0.3%
36104908 -0.3%
lkp-wsm-ep2
16820457 16911005 +0.5%
16968596 +0.9%
lkp-skl-d01 7721138 7725904 +0.1% 7756740 +0.5%
lkp-hsw-d01 7611979 7650928 +0.5% 7651323 +0.5%
lkp-sb02 3781546 3796502 +0.4% 3796827 +0.4%
will-it-scale.page_fault3.threads (higer is better)
machine batch=31 batch=63 batch=127
lkp-skl-4sp1 1865820±3% 1900917±2% +1.9% 1826245±4% -2.1%
lkp-bdw-ex1 3094060 3148326 +1.8% 3150036 +1.8%
lkp-skl-2sp2 3952940 3953898 +0.0% 3989360 +0.9%
lkp-bdw-ep2 3420373±3% 3643964 +6.5% 3644910±5% +6.6%
lkp-hsw-ep2 2609635±2% 2582310±3% -1.0% 2780459 +6.5%
lkp-wsm-ep2 4395001 4417196 +0.5% 4432499 +0.9%
lkp-skl-d01 5363977 5400003 +0.7% 5411370 +0.9%
lkp-hsw-d01 5274131 5311294 +0.7% 5319359 +0.9%
lkp-sb02 2917314 2913004 -0.1% 2935286 +0.6%
will-it-scale.read1.processes (higer is better)
machine batch=31 batch=63 batch=127
lkp-skl-4sp1
73762279±14%
69322519±10% -6.0%
69349855±13% -6.0% (result unstable)
lkp-bdw-ex1 1.701e+08 1.704e+08 +0.1% 1.705e+08 +0.2%
lkp-skl-2sp2
63111570 63113953 +0.0%
63836573 +1.1%
lkp-bdw-ep2
79247409 79424610 +0.2%
78012656 -1.6%
lkp-hsw-ep2
67677026 68308800 +0.9%
67539106 -0.2%
lkp-wsm-ep2
13339630 13939817 +4.5%
13766865 +3.2%
lkp-skl-d01
10969487 10972650 +0.0% no data
lkp-hsw-d01 9857342±2%
10080592±2% +2.3%
10131560 +2.8%
lkp-sb02 5189076 5197473 +0.2% 5163253 -0.5%
will-it-scale.read1.threads (higher is better)
machine batch=31 batch=63 batch=127
lkp-skl-4sp1
62468045±12%
73666726±7% +17.9%
79553123±12% +27.4% (result unstable)
lkp-bdw-ex1 1.62e+08 1.624e+08 +0.3% 1.614e+08 -0.3%
lkp-skl-2sp2
58319780 59181032 +1.5%
59821353 +2.6%
lkp-bdw-ep2
74057992 75698171 +2.2%
74990869 +1.3%
lkp-hsw-ep2
63672959 63639652 -0.1%
64387051 +1.1%
lkp-wsm-ep2
13489943 13526058 +0.3%
13259032 -1.7%
lkp-skl-d01
10297906 10338796 +0.4%
10407328 +1.1%
lkp-hsw-d01 9636721 9667376 +0.3% 9341147 -3.1%
lkp-sb02 4801938 4804496 +0.1% 4802290 +0.0%
will-it-scale.write1.processes (higer is better)
machine batch=31 batch=63 batch=127
lkp-skl-4sp1 1.111e+08 1.104e+08±2% -0.7% 1.122e+08±2% +1.0%
lkp-bdw-ex1 1.392e+08 1.399e+08 +0.5% 1.397e+08 +0.4%
lkp-skl-2sp2
59369233 58994841 -0.6%
58715168 -1.1%
lkp-bdw-ep2
61820979 CPU throttle
63593123 +2.9%
lkp-hsw-ep2
57897587 57435605 -0.8%
56347450 -2.7%
lkp-wsm-ep2 7814203 7918017±2% +1.3% 7669068 -1.9%
lkp-skl-d01 8886557 8971422 +1.0% 8818366 -0.8%
lkp-hsw-d01 9171001±5% 9189915 +0.2% 9483909 +3.4%
lkp-sb02 4475406 4475294 -0.0% 4501756 +0.6%
will-it-scale.write1.threads (higer is better)
machine batch=31 batch=63 batch=127
lkp-skl-4sp1 1.058e+08 1.055e+08±2% -0.2% 1.065e+08 +0.7%
lkp-bdw-ex1 1.316e+08 1.300e+08 -1.2% 1.308e+08 -0.6%
lkp-skl-2sp2
54492421 56086678 +2.9%
55975657 +2.7%
lkp-bdw-ep2
59360449 59003957 -0.6%
58101262 -2.1%
lkp-hsw-ep2
53346346±2%
52530876 -1.5%
52902487 -0.8%
lkp-wsm-ep2 7774006 7800092±2% +0.3% 7558833 -2.8%
lkp-skl-d01 8346174 8235695 -1.3% no data
lkp-hsw-d01 8636244 8655731 +0.2% 8658868 +0.3%
lkp-sb02 4181820 4204107 +0.5% 4182992 +0.0%
vm-scalability.anon-r-rand.throughput (higher is better)
machine batch=31 batch=63 batch=127
lkp-skl-4sp1
11933873±3%
12356544±2% +3.5%
12188624 +2.1%
lkp-bdw-ex1 7114424±2% 7330949±2% +3.0% 7392419 +3.9%
lkp-skl-2sp2 6773277±5% 6492332±8% -4.1% 6543962 -3.4%
lkp-bdw-ep2 7133846±4% 7233508 +1.4% 7013518±3% -1.7%
lkp-hsw-ep2 4576626 4527098 -1.1% 4551679 -0.5%
lkp-wsm-ep2 2583599 2592492 +0.3% 2588039 +0.2%
lkp-hsw-d01 998199±2% 1028311 +3.0% 1006460±2% +0.8%
lkp-sb02 570572 567854 -0.5% 568449 -0.4%
vm-scalability.anon-r-rand-mt.throughput (higher is better)
machine batch=31 batch=63 batch=127
lkp-skl-4sp1 1789419 1787830 -0.1% 1788208 -0.1%
lkp-bdw-ex1 3492595±2% 3554966±2% +1.8% 3558835±3% +1.9%
lkp-skl-2sp2 3856238±2% 3975403±4% +3.1% 3994600 +3.6%
lkp-bdw-ep2 3726963±11% 3809292±6% +2.2% 3871924±4% +3.9%
lkp-hsw-ep2 2131760±3% 2033578±4% -4.6% 2130727±6% -0.0%
lkp-wsm-ep2 2369731 2368384 -0.1% 2370252 +0.0%
lkp-skl-d01 1207128 1206220 -0.1% 1205801 -0.1%
lkp-hsw-d01 964317 992329±2% +2.9% 992099±2% +2.9%
lkp-sb02 567137 567346 +0.0% 566144 -0.2%
vm-scalability.lru-file-mmap-read.throughput (higher is better)
machine batch=31 batch=63 batch=127
lkp-skl-4sp1
19560469±6%
23018999 +17.7%
23418800 +19.7%
lkp-bdw-ex1
17769135±14%
26141676±3% +47.1%
26284723±5% +47.9%
lkp-skl-2sp2
14056512 13578884 -3.4%
13146214 -6.5%
lkp-bdw-ep2
15336542 14737654 -3.9%
14088159 -8.1%
lkp-hsw-ep2
16275498 15756296 -3.2%
15018090 -7.7%
lkp-wsm-ep2
11272160 11237231 -0.3%
11310047 +0.3%
lkp-skl-d01 7322119 7324569 +0.0% 7184148 -1.9%
lkp-hsw-d01 6449234 6404542 -0.7% 6356141 -1.4%
lkp-sb02 3517943 3520668 +0.1% 3527309 +0.3%
vm-scalability.lru-file-mmap-read-rand.throughput (higher is better)
machine batch=31 batch=63 batch=127
lkp-skl-4sp1 1689052 1697553 +0.5% 1698726 +0.6%
lkp-bdw-ex1 1675246 1699764 +1.5% 1712226 +2.2%
lkp-skl-2sp2 1800533 1799749 -0.0% 1800581 +0.0%
lkp-bdw-ep2 1807422 1807758 +0.0% 1804932 -0.1%
lkp-hsw-ep2 1809807 1808781 -0.1% 1807811 -0.1%
lkp-wsm-ep2 1800198 1802434 +0.1% 1801236 +0.1%
lkp-skl-d01 696689 695537 -0.2% 694106 -0.4%
lkp-hsw-d01 698364 698666 +0.0% 696686 -0.2%
lkp-sb02 258939 258787 -0.1% 258199 -0.3%
Link: http://lkml.kernel.org/r/20180711055855.29072-1-aaron.lu@intel.com
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Kemi Wang <kemi.wang@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 17 Aug 2018 22:49:10 +0000 (15:49 -0700)]
mm/oom_kill.c: document oom_lock
Add comments describing oom_lock's scope.
Requested-by: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/20180711120121.25635-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Kravetz [Fri, 17 Aug 2018 22:49:07 +0000 (15:49 -0700)]
mm/hugetlb: remove gigantic page support for HIGHMEM
This reverts
ee8f248d266e ("hugetlb: add phys addr to struct
huge_bootmem_page").
At one time powerpc used this field and supporting code. However that
was removed with commit
79cc38ded1e1 ("powerpc/mm/hugetlb: Add support
for reserving gigantic huge pages via kernel command line").
There are no users of this field and supporting code, so remove it.
Link: http://lkml.kernel.org/r/20180711195913.1294-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 17 Aug 2018 22:49:04 +0000 (15:49 -0700)]
mm, oom: remove sleep from under oom_lock
Tetsuo has pointed out that since
27ae357fa82b ("mm, oom: fix concurrent
munlock and oom reaper unmap, v3") we have a strong synchronization
between the oom_killer and victim's exiting because both have to take
the oom_lock. Therefore the original heuristic to sleep for a short
time in out_of_memory doesn't serve the original purpose.
Moreover Tetsuo has noticed that the short sleep can be more harmful
than actually useful. Hammering the system with many processes can lead
to a starvation when the task holding the oom_lock can block for a long
time (minutes) and block any further progress because the oom_reaper
depends on the oom_lock as well.
Drop the short sleep from out_of_memory when we hold the lock. Keep the
sleep when the trylock fails to throttle the concurrent OOM paths a bit.
This should be solved in a more reasonable way (e.g. sleep proportional
to the time spent in the active reclaiming etc.) but this is much more
complex thing to achieve. This is a quick fixup to remove a stale code.
Link: http://lkml.kernel.org/r/20180709074706.30635-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Marek Szyprowski [Fri, 17 Aug 2018 22:49:00 +0000 (15:49 -0700)]
kernel/dma: remove unsupported gfp_mask parameter from dma_alloc_from_contiguous()
The CMA memory allocator doesn't support standard gfp flags for memory
allocation, so there is no point having it as a parameter for
dma_alloc_from_contiguous() function. Replace it by a boolean no_warn
argument, which covers all the underlaying cma_alloc() function
supports.
This will help to avoid giving false feeling that this function supports
standard gfp flags and callers can pass __GFP_ZERO to get zeroed buffer,
what has already been an issue: see commit
dd65a941f6ba ("arm64:
dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag").
Link: http://lkml.kernel.org/r/20180709122020eucas1p21a71b092975cb4a3b9954ffc63f699d1~-sqUFoa-h2939329393eucas1p2Y@eucas1p2.samsung.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Michał Nazarewicz <mina86@mina86.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Marek Szyprowski [Fri, 17 Aug 2018 22:48:57 +0000 (15:48 -0700)]
mm/cma: remove unsupported gfp_mask parameter from cma_alloc()
cma_alloc() doesn't really support gfp flags other than __GFP_NOWARN, so
convert gfp_mask parameter to boolean no_warn parameter.
This will help to avoid giving false feeling that this function supports
standard gfp flags and callers can pass __GFP_ZERO to get zeroed buffer,
what has already been an issue: see commit
dd65a941f6ba ("arm64:
dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag").
Link: http://lkml.kernel.org/r/20180709122019eucas1p2340da484acfcc932537e6014f4fd2c29~-sqTPJKij2939229392eucas1p2j@eucas1p2.samsung.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michał Nazarewicz <mina86@mina86.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rik van Riel [Fri, 17 Aug 2018 22:48:53 +0000 (15:48 -0700)]
Revert "mm: always flush VMA ranges affected by zap_page_range"
There was a bug in Linux that could cause madvise (and mprotect?) system
calls to return to userspace without the TLB having been flushed for all
the pages involved.
This could happen when multiple threads of a process made simultaneous
madvise and/or mprotect calls.
This was noticed in the summer of 2017, at which time two solutions
were created:
56236a59556c ("mm: refactor TLB gathering API")
99baac21e458 ("mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem")
and
4647706ebeee ("mm: always flush VMA ranges affected by zap_page_range")
We need only one of these solutions, and the former appears to be a
little more efficient than the latter, so revert that one.
This reverts
4647706ebeee6e50 ("mm: always flush VMA ranges affected by
zap_page_range")
Link: http://lkml.kernel.org/r/20180706131019.51e3a5f0@imladris.surriel.com
Signed-off-by: Rik van Riel <riel@surriel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Baoquan He [Fri, 17 Aug 2018 22:48:49 +0000 (15:48 -0700)]
mm/sparse: optimize memmap allocation during sparse_init()
In sparse_init(), two temporary pointer arrays, usemap_map and map_map
are allocated with the size of NR_MEM_SECTIONS. They are used to store
each memory section's usemap and mem map if marked as present. With the
help of these two arrays, continuous memory chunk is allocated for
usemap and memmap for memory sections on one node. This avoids too many
memory fragmentations. Like below diagram, '1' indicates the present
memory section, '0' means absent one. The number 'n' could be much
smaller than NR_MEM_SECTIONS on most of systems.
|1|1|1|1|0|0|0|0|1|1|0|0|...|1|0||1|0|...|1||0|1|...|0|
-------------------------------------------------------
0 1 2 3 4 5 i i+1 n-1 n
If we fail to populate the page tables to map one section's memmap, its
->section_mem_map will be cleared finally to indicate that it's not
present. After use, these two arrays will be released at the end of
sparse_init().
In 4-level paging mode, each array costs 4M which can be ignorable.
While in 5-level paging, they costs 256M each, 512M altogether. Kdump
kernel Usually only reserves very few memory, e.g 256M. So, even thouth
they are temporarily allocated, still not acceptable.
In fact, there's no need to allocate them with the size of
NR_MEM_SECTIONS. Since the ->section_mem_map clearing has been deferred
to the last, the number of present memory sections are kept the same
during sparse_init() until we finally clear out the memory section's
->section_mem_map if its usemap or memmap is not correctly handled.
Thus in the middle whenever for_each_present_section_nr() loop is taken,
the i-th present memory section is always the same one.
Here only allocate usemap_map and map_map with the size of
'nr_present_sections'. For the i-th present memory section, install its
usemap and memmap to usemap_map[i] and mam_map[i] during allocation.
Then in the last for_each_present_section_nr() loop which clears the
failed memory section's ->section_mem_map, fetch usemap and memmap from
usemap_map[] and map_map[] array and set them into mem_section[]
accordingly.
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20180628062857.29658-5-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Oscar Salvador <osalvador@techadventures.net>
Cc: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Baoquan He [Fri, 17 Aug 2018 22:48:45 +0000 (15:48 -0700)]
mm/sparse.c: add a new parameter 'data_unit_size' for alloc_usemap_and_memmap
It's used to pass the size of map data unit into
alloc_usemap_and_memmap, and is preparation for next patch.
Link: http://lkml.kernel.org/r/20180228032657.32385-4-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Pankaj Gupta <pagupta@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Baoquan He [Fri, 17 Aug 2018 22:48:42 +0000 (15:48 -0700)]
mm/sparsemem.c: defer the ms->section_mem_map clearing
In sparse_init(), if CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y, system
will allocate one continuous memory chunk for mem maps on one node and
populate the relevant page tables to map memory section one by one. If
fail to populate for a certain mem section, print warning and its
->section_mem_map will be cleared to cancel the marking of being
present. Like this, the number of mem sections marked as present could
become less during sparse_init() execution.
Here just defer the ms->section_mem_map clearing if failed to populate
its page tables until the last for_each_present_section_nr() loop. This
is in preparation for later optimizing the mem map allocation.
[akpm@linux-foundation.org: remove now-unused local `ms', per Oscar]
Link: http://lkml.kernel.org/r/20180228032657.32385-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Baoquan He [Fri, 17 Aug 2018 22:48:38 +0000 (15:48 -0700)]
mm/sparse.c: add a static variable nr_present_sections
Patch series "mm/sparse: Optimize memmap allocation during
sparse_init()", v6.
In sparse_init(), two temporary pointer arrays, usemap_map and map_map
are allocated with the size of NR_MEM_SECTIONS. They are used to store
each memory section's usemap and mem map if marked as present. In
5-level paging mode, this will cost 512M memory though they will be
released at the end of sparse_init(). System with few memory, like
kdump kernel which usually only has about 256M, will fail to boot
because of allocation failure if CONFIG_X86_5LEVEL=y.
In this patchset, optimize the memmap allocation code to only use
usemap_map and map_map with the size of nr_present_sections. This makes
kdump kernel boot up with normal crashkernel='' setting when
CONFIG_X86_5LEVEL=y.
This patch (of 5):
nr_present_sections is used to record how many memory sections are
marked as present during system boot up, and will be used in the later
patch.
Link: http://lkml.kernel.org/r/20180228032657.32385-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill Tkhai [Fri, 17 Aug 2018 22:48:34 +0000 (15:48 -0700)]
mm: use special value SHRINKER_REGISTERING instead of list_empty() check
The patch introduces a special value SHRINKER_REGISTERING to use instead
of list_empty() to differ a registering shrinker from unregistered
shrinker. Why we need that at all?
Shrinker registration is split in two parts. The first one is
prealloc_shrinker(), which allocates shrinker memory and reserves ID in
shrinker_idr. This function can fail. The second is
register_shrinker_prepared(), and it finalizes the registration. This
function actually makes shrinker available to be used from
shrink_slab(), and it can't fail.
One shrinker may be based on more then one LRU lists. So, we never
clear the bit in memcg shrinker maps, when (one of) corresponding LRU
list becomes empty, since other LRU lists may be not empty. See
superblock shrinker for example: it is based on two LRU lists:
s_inode_lru and s_dentry_lru. We do not want to clear shrinker bit,
when there are no inodes in s_inode_lru, as s_dentry_lru may contain
dentries.
Instead of that, we use special algorithm to detect shrinkers having no
elements at all its LRU lists, and this is made in shrink_slab_memcg().
See the comment in this function for the details.
Also, in shrink_slab_memcg() we clear shrinker bit in the map, when we
meet unregistered shrinker (bit is set, while there is no a shrinker in
IDR). Otherwise, we would have done that at the moment of shrinker
unregistration for all memcgs (and this looks worse, since iteration
over all memcg may take much time). Also this would have imposed
restrictions on shrinker unregistration order for its users: they would
have had to guarantee, there are no new elements after
unregister_shrinker() (otherwise, a new added element would have set a
bit).
So, if we meet a set bit in map and no shrinker in IDR when we're
iterating over the map in shrink_slab_memcg(), this means the
corresponding shrinker is unregistered, and we must clear the bit.
Another case is shrinker registration. We want two things there:
1) do_shrink_slab() can be called only for completely registered
shrinkers;
2) shrinker internal lists may be populated in any order with
register_shrinker_prepared() (let's talk on the example with sb). Both
of:
a)list_lru_add(&inode->i_sb->s_inode_lru, &inode->i_lru); [cpu0]
memcg_set_shrinker_bit(); [cpu0]
...
register_shrinker_prepared(); [cpu1]
and
b)register_shrinker_prepared(); [cpu0]
...
list_lru_add(&inode->i_sb->s_inode_lru, &inode->i_lru); [cpu1]
memcg_set_shrinker_bit(); [cpu1]
are legitimate. We don't want to impose restriction here and to
force people to use only (b) variant. We don't want to force people to
care, there is no elements in LRU lists before the shrinker is
completely registered. Internal users of LRU lists and shrinker code
are two different subsystems, and they have to be closed in themselves
each other.
In (a) case we have the bit set before shrinker is completely
registered. We don't want do_shrink_slab() is called at this moment, so
we have to detect such the registering shrinkers.
Before this patch list_empty() (shrinker is not linked to the list)
check was used for that. So, in (a) there could be a bit set, but we
don't call do_shrink_slab() unless shrinker is linked to the list. It's
just an indicator, I just overloaded linking to the list.
This was not the best solution, since it's better not to touch the
shrinker memory from shrink_slab_memcg() before it's completely
registered (this also will be useful in the future to make shrink_slab()
completely lockless).
So, this patch introduces better way to detect registering shrinker,
which allows not to dereference shrinker memory. It's just a ~0UL
value, which we insert into the IDR during ID allocation. After
shrinker is ready to be used, we insert actual shrinker pointer in the
IDR, and it becomes available to shrink_slab_memcg().
We can't use NULL instead of this new value for this purpose as:
shrink_slab_memcg() already uses NULL to detect unregistered shrinkers,
and we don't want the function sees NULL and clears the bit, otherwise
(a) won't work.
This is the only thing the patch makes: the better way to detect
registering shrinker. Nothing else this patch makes.
Also this gives a better assembler, but it's minor side of the patch:
Before:
callq <idr_find>
mov %rax,%r15
test %rax,%rax
je <shrink_slab_memcg+0x1d5>
mov 0x20(%rax),%rax
lea 0x20(%r15),%rdx
cmp %rax,%rdx
je <shrink_slab_memcg+0xbd>
mov 0x8(%rsp),%edx
mov %r15,%rsi
lea 0x10(%rsp),%rdi
callq <do_shrink_slab>
After:
callq <idr_find>
mov %rax,%r15
lea -0x1(%rax),%rax
cmp $0xfffffffffffffffd,%rax
ja <shrink_slab_memcg+0x1cd>
mov 0x8(%rsp),%edx
mov %r15,%rsi
lea 0x10(%rsp),%rdi
callq
ffffffff810cefd0 <do_shrink_slab>
[ktkhai@virtuozzo.com: add #ifdef CONFIG_MEMCG_KMEM around idr_replace()]
Link: http://lkml.kernel.org/r/758b8fec-7573-47eb-b26a-7b2847ae7b8c@virtuozzo.com
Link: http://lkml.kernel.org/r/153355467546.11522.4518015068123480218.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill Tkhai [Fri, 17 Aug 2018 22:48:30 +0000 (15:48 -0700)]
mm/vmscan.c: move check for SHRINKER_NUMA_AWARE to do_shrink_slab()
In case of shrink_slab_memcg() we do not zero nid, when shrinker is not
numa-aware. This is not a real problem, since currently all memcg-aware
shrinkers are numa-aware too (we have two: super_block shrinker and
workingset shrinker), but something may change in the future.
Link: http://lkml.kernel.org/r/153320759911.18959.8842396230157677671.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill Tkhai [Fri, 17 Aug 2018 22:48:25 +0000 (15:48 -0700)]
mm/vmscan.c: clear shrinker bit if there are no objects related to memcg
To avoid further unneed calls of do_shrink_slab() for shrinkers, which
already do not have any charged objects in a memcg, their bits have to
be cleared.
This patch introduces a lockless mechanism to do that without races
without parallel list lru add. After do_shrink_slab() returns
SHRINK_EMPTY the first time, we clear the bit and call it once again.
Then we restore the bit, if the new return value is different.
Note, that single smp_mb__after_atomic() in shrink_slab_memcg() covers
two situations:
1)list_lru_add() shrink_slab_memcg
list_add_tail() for_each_set_bit() <--- read bit
do_shrink_slab() <--- missed list update (no barrier)
<MB> <MB>
set_bit() do_shrink_slab() <--- seen list update
This situation, when the first do_shrink_slab() sees set bit, but it
doesn't see list update (i.e., race with the first element queueing), is
rare. So we don't add <MB> before the first call of do_shrink_slab()
instead of this to do not slow down generic case. Also, it's need the
second call as seen in below in (2).
2)list_lru_add() shrink_slab_memcg()
list_add_tail() ...
set_bit() ...
... for_each_set_bit()
do_shrink_slab() do_shrink_slab()
clear_bit() ...
... ...
list_lru_add() ...
list_add_tail() clear_bit()
<MB> <MB>
set_bit() do_shrink_slab()
The barriers guarantee that the second do_shrink_slab() in the right
side task sees list update if really cleared the bit. This case is
drawn in the code comment.
[Results/performance of the patchset]
After the whole patchset applied the below test shows signify increase
of performance:
$echo 1 > /sys/fs/cgroup/memory/memory.use_hierarchy
$mkdir /sys/fs/cgroup/memory/ct
$echo 4000M > /sys/fs/cgroup/memory/ct/memory.kmem.limit_in_bytes
$for i in `seq 0 4000`; do mkdir /sys/fs/cgroup/memory/ct/$i;
echo $$ > /sys/fs/cgroup/memory/ct/$i/cgroup.procs;
mkdir -p s/$i; mount -t tmpfs $i s/$i;
touch s/$i/file; done
Then, 5 sequential calls of drop caches:
$time echo 3 > /proc/sys/vm/drop_caches
1)Before:
0.00user 13.78system 0:13.78elapsed 99%CPU
0.00user 5.59system 0:05.60elapsed 99%CPU
0.00user 5.48system 0:05.48elapsed 99%CPU
0.00user 8.35system 0:08.35elapsed 99%CPU
0.00user 8.34system 0:08.35elapsed 99%CPU
2)After
0.00user 1.10system 0:01.10elapsed 99%CPU
0.00user 0.00system 0:00.01elapsed 64%CPU
0.00user 0.01system 0:00.01elapsed 82%CPU
0.00user 0.00system 0:00.01elapsed 64%CPU
0.00user 0.01system 0:00.01elapsed 82%CPU
The results show the performance increases at least in 548 times.
Shakeel Butt tested this patchset with fork-bomb on his configuration:
> I created 255 memcgs, 255 ext4 mounts and made each memcg create a
> file containing few KiBs on corresponding mount. Then in a separate
> memcg of 200 MiB limit ran a fork-bomb.
>
> I ran the "perf record -ag -- sleep 60" and below are the results:
>
> Without the patch series:
> Samples: 4M of event 'cycles', Event count (approx.):
3279403076005
> + 36.40% fb.sh [kernel.kallsyms] [k] shrink_slab
> + 18.97% fb.sh [kernel.kallsyms] [k] list_lru_count_one
> + 6.75% fb.sh [kernel.kallsyms] [k] super_cache_count
> + 0.49% fb.sh [kernel.kallsyms] [k] down_read_trylock
> + 0.44% fb.sh [kernel.kallsyms] [k] mem_cgroup_iter
> + 0.27% fb.sh [kernel.kallsyms] [k] up_read
> + 0.21% fb.sh [kernel.kallsyms] [k] osq_lock
> + 0.13% fb.sh [kernel.kallsyms] [k] shmem_unused_huge_count
> + 0.08% fb.sh [kernel.kallsyms] [k] shrink_node_memcg
> + 0.08% fb.sh [kernel.kallsyms] [k] shrink_node
>
> With the patch series:
> Samples: 4M of event 'cycles', Event count (approx.):
2756866824946
> + 47.49% fb.sh [kernel.kallsyms] [k] down_read_trylock
> + 30.72% fb.sh [kernel.kallsyms] [k] up_read
> + 9.51% fb.sh [kernel.kallsyms] [k] mem_cgroup_iter
> + 1.69% fb.sh [kernel.kallsyms] [k] shrink_node_memcg
> + 1.35% fb.sh [kernel.kallsyms] [k] mem_cgroup_protected
> + 1.05% fb.sh [kernel.kallsyms] [k] queued_spin_lock_slowpath
> + 0.85% fb.sh [kernel.kallsyms] [k] _raw_spin_lock
> + 0.78% fb.sh [kernel.kallsyms] [k] lruvec_lru_size
> + 0.57% fb.sh [kernel.kallsyms] [k] shrink_node
> + 0.54% fb.sh [kernel.kallsyms] [k] queue_work_on
> + 0.46% fb.sh [kernel.kallsyms] [k] shrink_slab_memcg
[ktkhai@virtuozzo.com: v9]
Link: http://lkml.kernel.org/r/153112561772.4097.11011071937553113003.stgit@localhost.localdomain
Link: http://lkml.kernel.org/r/153063070859.1818.11870882950920963480.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill Tkhai [Fri, 17 Aug 2018 22:48:21 +0000 (15:48 -0700)]
mm: add SHRINK_EMPTY shrinker methods return value
We need to distinguish the situations when shrinker has very small
amount of objects (see vfs_pressure_ratio() called from
super_cache_count()), and when it has no objects at all. Currently, in
the both of these cases, shrinker::count_objects() returns 0.
The patch introduces new SHRINK_EMPTY return value, which will be used
for "no objects at all" case. It's is a refactoring mostly, as
SHRINK_EMPTY is replaced by 0 by all callers of do_shrink_slab() in this
patch, and all the magic will happen in further.
Link: http://lkml.kernel.org/r/153063069574.1818.11037751256699341813.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Fri, 17 Aug 2018 22:48:17 +0000 (15:48 -0700)]
mm/vmscan.c: generalize shrink_slab() calls in shrink_node()
The patch makes shrink_slab() be called for root_mem_cgroup in the same
way as it's called for the rest of cgroups. This simplifies the logic
and improves the readability.
[ktkhai@virtuozzo.com: wrote changelog]
Link: http://lkml.kernel.org/r/153063068338.1818.11496084754797453962.stgit@localhost.localdomain
Signed-off-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill Tkhai [Fri, 17 Aug 2018 22:48:14 +0000 (15:48 -0700)]
mm/vmscan.c: iterate only over charged shrinkers during memcg shrink_slab()
Using the preparations made in previous patches, in case of memcg
shrink, we may avoid shrinkers, which are not set in memcg's shrinkers
bitmap. To do that, we separate iterations over memcg-aware and
!memcg-aware shrinkers, and memcg-aware shrinkers are chosen via
for_each_set_bit() from the bitmap. In case of big nodes, having many
isolated environments, this gives significant performance growth. See
next patches for the details.
Note that the patch does not respect to empty memcg shrinkers, since we
never clear the bitmap bits after we set it once. Their shrinkers will
be called again, with no shrinked objects as result. This functionality
is provided by next patches.
[ktkhai@virtuozzo.com: v9]
Link: http://lkml.kernel.org/r/153112558507.4097.12713813335683345488.stgit@localhost.localdomain
Link: http://lkml.kernel.org/r/153063066653.1818.976035462801487910.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill Tkhai [Fri, 17 Aug 2018 22:48:10 +0000 (15:48 -0700)]
mm/list_lru.c: set bit in memcg shrinker bitmap on first list_lru item appearance
Introduce set_shrinker_bit() function to set shrinker-related bit in
memcg shrinker bitmap, and set the bit after the first item is added and
in case of reparenting destroyed memcg's items.
This will allow next patch to make shrinkers be called only, in case of
they have charged objects at the moment, and to improve shrink_slab()
performance.
[ktkhai@virtuozzo.com: v9]
Link: http://lkml.kernel.org/r/153112557572.4097.17315791419810749985.stgit@localhost.localdomain
Link: http://lkml.kernel.org/r/153063065671.1818.15914674956134687268.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill Tkhai [Fri, 17 Aug 2018 22:48:06 +0000 (15:48 -0700)]
mm/memcontrol.c: export mem_cgroup_is_root()
This will be used in next patch.
Link: http://lkml.kernel.org/r/153063064347.1818.1987011484100392706.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill Tkhai [Fri, 17 Aug 2018 22:48:01 +0000 (15:48 -0700)]
mm/list_lru.c: pass lru argument to memcg_drain_list_lru_node()
This is just refactoring to allow next patches to have lru pointer in
memcg_drain_list_lru_node().
Link: http://lkml.kernel.org/r/153063063164.1818.55009531386089350.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill Tkhai [Fri, 17 Aug 2018 22:47:58 +0000 (15:47 -0700)]
mm/list_lru: pass dst_memcg argument to memcg_drain_list_lru_node()
This is just refactoring to allow the next patches to have dst_memcg
pointer in memcg_drain_list_lru_node().
Link: http://lkml.kernel.org/r/153063062118.1818.2761273817739499749.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill Tkhai [Fri, 17 Aug 2018 22:47:54 +0000 (15:47 -0700)]
mm/list_lru.c: add memcg argument to list_lru_from_kmem()
This is just refactoring to allow the next patches to have memcg pointer
in list_lru_from_kmem().
Link: http://lkml.kernel.org/r/153063060664.1818.9541345386733498582.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill Tkhai [Fri, 17 Aug 2018 22:47:50 +0000 (15:47 -0700)]
fs: propagate shrinker::id to list_lru
Add list_lru::shrinker_id field and populate it by registered shrinker
id.
This will be used to set correct bit in memcg shrinkers map by lru code
in next patches, after there appeared the first related to memcg element
in list_lru.
Link: http://lkml.kernel.org/r/153063059758.1818.14866596416857717800.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill Tkhai [Fri, 17 Aug 2018 22:47:45 +0000 (15:47 -0700)]
fs/super.c: refactor alloc_super()
Do two list_lru_init_memcg() calls after prealloc_super().
destroy_unused_super() in fail path is OK with this. Next patch needs
such the order.
Link: http://lkml.kernel.org/r/153063058712.1818.3382490999719078571.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill Tkhai [Fri, 17 Aug 2018 22:47:41 +0000 (15:47 -0700)]
mm/workingset.c: refactor workingset_init()
Use prealloc_shrinker()/register_shrinker_prepared() instead of
register_shrinker(). This will be used in next patch.
[ktkhai@virtuozzo.com: v9]
Link: http://lkml.kernel.org/r/153112550112.4097.16606173020912323761.stgit@localhost.localdomain
Link: http://lkml.kernel.org/r/153063057666.1818.17625951186610808734.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill Tkhai [Fri, 17 Aug 2018 22:47:37 +0000 (15:47 -0700)]
mm, memcg: assign memcg-aware shrinkers bitmap to memcg
Imagine a big node with many cpus, memory cgroups and containers. Let
we have 200 containers, every container has 10 mounts, and 10 cgroups.
All container tasks don't touch foreign containers mounts. If there is
intensive pages write, and global reclaim happens, a writing task has to
iterate over all memcgs to shrink slab, before it's able to go to
shrink_page_list().
Iteration over all the memcg slabs is very expensive: the task has to
visit 200 * 10 = 2000 shrinkers for every memcg, and since there are
2000 memcgs, the total calls are 2000 * 2000 = 4000000.
So, the shrinker makes 4 million do_shrink_slab() calls just to try to
isolate SWAP_CLUSTER_MAX pages in one of the actively writing memcg via
shrink_page_list(). I've observed a node spending almost 100% in
kernel, making useless iteration over already shrinked slab.
This patch adds bitmap of memcg-aware shrinkers to memcg. The size of
the bitmap depends on bitmap_nr_ids, and during memcg life it's
maintained to be enough to fit bitmap_nr_ids shrinkers. Every bit in
the map is related to corresponding shrinker id.
Next patches will maintain set bit only for really charged memcg. This
will allow shrink_slab() to increase its performance in significant way.
See the last patch for the numbers.
[ktkhai@virtuozzo.com: v9]
Link: http://lkml.kernel.org/r/153112549031.4097.3576147070498769979.stgit@localhost.localdomain
[ktkhai@virtuozzo.com: add comment to mem_cgroup_css_online()]
Link: http://lkml.kernel.org/r/521f9e5f-c436-b388-fe83-4dc870bfb489@virtuozzo.com
Link: http://lkml.kernel.org/r/153063056619.1818.12550500883688681076.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill Tkhai [Fri, 17 Aug 2018 22:47:33 +0000 (15:47 -0700)]
mm/memcontrol.c: move up for_each_mem_cgroup{, _tree} defines
Next patch requires these defines are above their current position, so
here they are moved to declarations.
Link: http://lkml.kernel.org/r/153063055665.1818.5200425793649695598.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill Tkhai [Fri, 17 Aug 2018 22:47:29 +0000 (15:47 -0700)]
mm: assign id to every memcg-aware shrinker
Introduce shrinker::id number, which is used to enumerate memcg-aware
shrinkers. The number start from 0, and the code tries to maintain it
as small as possible.
This will be used to represent a memcg-aware shrinkers in memcg
shrinkers map.
Since all memcg-aware shrinkers are based on list_lru, which is
per-memcg in case of !CONFIG_MEMCG_KMEM only, the new functionality will
be under this config option.
[ktkhai@virtuozzo.com: v9]
Link: http://lkml.kernel.org/r/153112546435.4097.10607140323811756557.stgit@localhost.localdomain
Link: http://lkml.kernel.org/r/153063054586.1818.6041047871606697364.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill Tkhai [Fri, 17 Aug 2018 22:47:25 +0000 (15:47 -0700)]
mm: introduce CONFIG_MEMCG_KMEM as combination of CONFIG_MEMCG && !CONFIG_SLOB
Introduce new config option, which is used to replace repeating
CONFIG_MEMCG && !CONFIG_SLOB pattern. Next patches add a little more
memcg+kmem related code, so let's keep the defines more clearly.
Link: http://lkml.kernel.org/r/153063053670.1818.15013136946600481138.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill Tkhai [Fri, 17 Aug 2018 22:47:21 +0000 (15:47 -0700)]
mm/list_lru.c: combine code under the same define
Patch series "Improve shrink_slab() scalability (old complexity was O(n^2), new is O(n))", v8.
This patcheset solves the problem with slow shrink_slab() occuring on
the machines having many shrinkers and memory cgroups (i.e., with many
containers). The problem is complexity of shrink_slab() is O(n^2) and
it grows too fast with the growth of containers numbers.
Let us have 200 containers, and every container has 10 mounts and 10
cgroups. All container tasks are isolated, and they don't touch foreign
containers mounts.
In case of global reclaim, a task has to iterate all over the memcgs and
to call all the memcg-aware shrinkers for all of them. This means, the
task has to visit 200 * 10 = 2000 shrinkers for every memcg, and since
there are 2000 memcgs, the total calls of do_shrink_slab() are 2000 *
2000 = 4000000.
4 million calls are not a number operations, which can takes 1 cpu
cycle. E.g., super_cache_count() accesses at least two lists, and makes
arifmetical calculations. Even, if there are no charged objects, we do
these calculations, and replaces cpu caches by read memory. I observed
nodes spending almost 100% time in kernel, in case of intensive writing
and global reclaim. The writer consumes pages fast, but it's need to
shrink_slab() before the reclaimer reached shrink pages function (and
frees SWAP_CLUSTER_MAX pages). Even if there is no writing, the
iterations just waste the time, and slows reclaim down.
Let's see the small test below:
$echo 1 > /sys/fs/cgroup/memory/memory.use_hierarchy
$mkdir /sys/fs/cgroup/memory/ct
$echo 4000M > /sys/fs/cgroup/memory/ct/memory.kmem.limit_in_bytes
$for i in `seq 0 4000`;
do mkdir /sys/fs/cgroup/memory/ct/$i;
echo $$ > /sys/fs/cgroup/memory/ct/$i/cgroup.procs;
mkdir -p s/$i; mount -t tmpfs $i s/$i; touch s/$i/file;
done
Then, let's see drop caches time (5 sequential calls):
$time echo 3 > /proc/sys/vm/drop_caches
0.00user 13.78system 0:13.78elapsed 99%CPU
0.00user 5.59system 0:05.60elapsed 99%CPU
0.00user 5.48system 0:05.48elapsed 99%CPU
0.00user 8.35system 0:08.35elapsed 99%CPU
0.00user 8.34system 0:08.35elapsed 99%CPU
The last four calls don't actually shrink anything. So, the iterations
over slab shrinkers take 5.48 seconds. Not so good for scalability.
The patchset solves the problem by making shrink_slab() of O(n)
complexity. There are following functional actions:
1) Assign id to every registered memcg-aware shrinker.
2) Maintain per-memcgroup bitmap of memcg-aware shrinkers, and set a
shrinker-related bit after the first element is added to lru list
(also, when removed child memcg elements are reparanted).
3) Split memcg-aware shrinkers and !memcg-aware shrinkers, and call a
shrinker if its bit is set in memcg's shrinker bitmap. (Also, there is
a functionality to clear the bit, after last element is shrinked).
This gives significant performance increase. The result after patchset
is applied:
$time echo 3 > /proc/sys/vm/drop_caches
0.00user 1.10system 0:01.10elapsed 99%CPU
0.00user 0.00system 0:00.01elapsed 64%CPU
0.00user 0.01system 0:00.01elapsed 82%CPU
0.00user 0.00system 0:00.01elapsed 64%CPU
0.00user 0.01system 0:00.01elapsed 82%CPU
The results show the performance increases at least in 548 times.
So, the patchset makes shrink_slab() of less complexity and improves the
performance in such types of load I pointed. This will give a profit in
case of !global reclaim case, since there also will be less
do_shrink_slab() calls.
This patch (of 17):
These two pairs of blocks of code are under the same #ifdef #else
#endif.
Link: http://lkml.kernel.org/r/153063052519.1818.9393587113056959488.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Roman Gushchin <guro@fb.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Waiman Long <longman@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Rapoport [Fri, 17 Aug 2018 22:47:17 +0000 (15:47 -0700)]
mm/memblock.c: replace u64 with phys_addr_t where appropriate
Most functions in memblock already use phys_addr_t to represent a
physical address with __memblock_free_late() being an exception.
This patch replaces u64 with phys_addr_t in __memblock_free_late() and
switches several format strings from %llx to %pa to avoid casting from
phys_addr_t to u64.
Link: http://lkml.kernel.org/r/1530637506-1256-1-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oscar Salvador [Fri, 17 Aug 2018 22:47:14 +0000 (15:47 -0700)]
mm/sparse.c: make sparse_init_one_section void and remove check
sparse_init_one_section() is being called from two sites: sparse_init()
and sparse_add_one_section(). The former calls it from a
for_each_present_section_nr() loop, and the latter marks the section as
present before calling it. This means that when
sparse_init_one_section() gets called, we already know that the section
is present. So there is no point to double check that in the function.
This removes the check and makes the function void.
[ross.zwisler@linux.intel.com: fix error path in sparse_add_one_section]
Link: http://lkml.kernel.org/r/20180706190658.6873-1-ross.zwisler@linux.intel.com
[ross.zwisler@linux.intel.com: simplification suggested by Oscar]
Link: http://lkml.kernel.org/r/20180706223358.742-1-ross.zwisler@linux.intel.com
Link: http://lkml.kernel.org/r/20180702154325.12196-1-osalvador@techadventures.net
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 17 Aug 2018 22:47:11 +0000 (15:47 -0700)]
memcg, oom: move out_of_memory back to the charge path
Commit
3812c8c8f395 ("mm: memcg: do not trap chargers with full
callstack on OOM") has changed the ENOMEM semantic of memcg charges.
Rather than invoking the oom killer from the charging context it delays
the oom killer to the page fault path (pagefault_out_of_memory). This
in turn means that many users (e.g. slab or g-u-p) will get ENOMEM when
the corresponding memcg hits the hard limit and the memcg is is OOM.
This is behavior is inconsistent with !memcg case where the oom killer
is invoked from the allocation context and the allocator keeps retrying
until it succeeds.
The difference in the behavior is user visible. mmap(MAP_POPULATE)
might result in not fully populated ranges while the mmap return code
doesn't tell that to the userspace. Random syscalls might fail with
ENOMEM etc.
The primary motivation of the different memcg oom semantic was the
deadlock avoidance. Things have changed since then, though. We have an
async oom teardown by the oom reaper now and so we do not have to rely
on the victim to tear down its memory anymore. Therefore we can return
to the original semantic as long as the memcg oom killer is not handed
over to the users space.
There is still one thing to be careful about here though. If the oom
killer is not able to make any forward progress - e.g. because there is
no eligible task to kill - then we have to bail out of the charge path
to prevent from same class of deadlocks. We have basically two options
here. Either we fail the charge with ENOMEM or force the charge and
allow overcharge. The first option has been considered more harmful
than useful because rare inconsistencies in the ENOMEM behavior is hard
to test for and error prone. Basically the same reason why the page
allocator doesn't fail allocations under such conditions. The later
might allow runaways but those should be really unlikely unless somebody
misconfigures the system. E.g. allowing to migrate tasks away from the
memcg to a different unlimited memcg with move_charge_at_immigrate
disabled.
Link: http://lkml.kernel.org/r/20180628151101.25307-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Rapoport [Fri, 17 Aug 2018 22:47:07 +0000 (15:47 -0700)]
mm: make DEFERRED_STRUCT_PAGE_INIT explicitly depend on SPARSEMEM
The deferred memory initialization relies on section definitions, e.g
PAGES_PER_SECTION, that are only available when CONFIG_SPARSEMEM=y on
most architectures.
Initially DEFERRED_STRUCT_PAGE_INIT depended on explicit
ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT configuration option, but since
the commit
2e3ca40f03bb13709df4 ("mm: relax deferred struct page
requirements") this requirement was relaxed and now it is possible to
enable DEFERRED_STRUCT_PAGE_INIT on architectures that support
DISCONTINGMEM and NO_BOOTMEM which causes build failures.
For instance, setting SMP=y and DEFERRED_STRUCT_PAGE_INIT=y on arc
causes the following build failure:
CC mm/page_alloc.o
mm/page_alloc.c: In function 'update_defer_init':
mm/page_alloc.c:321:14: error: 'PAGES_PER_SECTION'
undeclared (first use in this function); did you mean 'USEC_PER_SEC'?
(pfn & (PAGES_PER_SECTION - 1)) == 0) {
^~~~~~~~~~~~~~~~~
USEC_PER_SEC
mm/page_alloc.c:321:14: note: each undeclared identifier is reported only once for each function it appears in
In file included from include/linux/cache.h:5:0,
from include/linux/printk.h:9,
from include/linux/kernel.h:14,
from include/asm-generic/bug.h:18,
from arch/arc/include/asm/bug.h:32,
from include/linux/bug.h:5,
from include/linux/mmdebug.h:5,
from include/linux/mm.h:9,
from mm/page_alloc.c:18:
mm/page_alloc.c: In function 'deferred_grow_zone':
mm/page_alloc.c:1624:52: error: 'PAGES_PER_SECTION' undeclared (first use in this function); did you mean 'USEC_PER_SEC'?
unsigned long nr_pages_needed = ALIGN(1 << order, PAGES_PER_SECTION);
^
include/uapi/linux/kernel.h:11:47: note: in definition of macro '__ALIGN_KERNEL_MASK'
#define __ALIGN_KERNEL_MASK(x, mask) (((x) + (mask)) & ~(mask))
^~~~
include/linux/kernel.h:58:22: note: in expansion of macro '__ALIGN_KERNEL'
#define ALIGN(x, a) __ALIGN_KERNEL((x), (a))
^~~~~~~~~~~~~~
mm/page_alloc.c:1624:34: note: in expansion of macro 'ALIGN'
unsigned long nr_pages_needed = ALIGN(1 << order, PAGES_PER_SECTION);
^~~~~
In file included from include/asm-generic/bug.h:18:0,
from arch/arc/include/asm/bug.h:32,
from include/linux/bug.h:5,
from include/linux/mmdebug.h:5,
from include/linux/mm.h:9,
from mm/page_alloc.c:18:
mm/page_alloc.c: In function 'free_area_init_node':
mm/page_alloc.c:6379:50: error: 'PAGES_PER_SECTION' undeclared (first use in this function); did you mean 'USEC_PER_SEC'?
pgdat->static_init_pgcnt = min_t(unsigned long, PAGES_PER_SECTION,
^
include/linux/kernel.h:812:22: note: in definition of macro '__typecheck'
(!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
^
include/linux/kernel.h:836:24: note: in expansion of macro '__safe_cmp'
__builtin_choose_expr(__safe_cmp(x, y), \
^~~~~~~~~~
include/linux/kernel.h:904:27: note: in expansion of macro '__careful_cmp'
#define min_t(type, x, y) __careful_cmp((type)(x), (type)(y), <)
^~~~~~~~~~~~~
mm/page_alloc.c:6379:29: note: in expansion of macro 'min_t'
pgdat->static_init_pgcnt = min_t(unsigned long, PAGES_PER_SECTION,
^~~~~
include/linux/kernel.h:836:2: error: first argument to '__builtin_choose_expr' not a constant
__builtin_choose_expr(__safe_cmp(x, y), \
^
include/linux/kernel.h:904:27: note: in expansion of macro '__careful_cmp'
#define min_t(type, x, y) __careful_cmp((type)(x), (type)(y), <)
^~~~~~~~~~~~~
mm/page_alloc.c:6379:29: note: in expansion of macro 'min_t'
pgdat->static_init_pgcnt = min_t(unsigned long, PAGES_PER_SECTION,
^~~~~
scripts/Makefile.build:317: recipe for target 'mm/page_alloc.o' failed
Let's make the DEFERRED_STRUCT_PAGE_INIT explicitly depend on SPARSEMEM
as the systems that support DISCONTIGMEM do not seem to have that huge
amounts of memory that would make DEFERRED_STRUCT_PAGE_INIT relevant.
Link: http://lkml.kernel.org/r/1530279308-24988-1-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Ryabinin [Fri, 17 Aug 2018 22:47:04 +0000 (15:47 -0700)]
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN
KASAN learns about hotadded memory via the memory hotplug notifier.
devm_memremap_pages() intentionally skips calling memory hotplug
notifiers. So KASAN doesn't know anything about new memory added by
devm_memremap_pages(). This causes a crash when KASAN tries to access
non-existent shadow memory:
BUG: unable to handle kernel paging request at
ffffed0078000000
RIP: 0010:check_memory_region+0x82/0x1e0
Call Trace:
memcpy+0x1f/0x50
pmem_do_bvec+0x163/0x720
pmem_make_request+0x305/0xac0
generic_make_request+0x54f/0xcf0
submit_bio+0x9c/0x370
submit_bh_wbc+0x4c7/0x700
block_read_full_page+0x5ef/0x870
do_read_cache_page+0x2b8/0xb30
read_dev_sector+0xbd/0x3f0
read_lba.isra.0+0x277/0x670
efi_partition+0x41a/0x18f0
check_partition+0x30d/0x5e9
rescan_partitions+0x18c/0x840
__blkdev_get+0x859/0x1060
blkdev_get+0x23f/0x810
__device_add_disk+0x9c8/0xde0
pmem_attach_disk+0x9a8/0xf50
nvdimm_bus_probe+0xf3/0x3c0
driver_probe_device+0x493/0xbd0
bus_for_each_drv+0x118/0x1b0
__device_attach+0x1cd/0x2b0
bus_probe_device+0x1ac/0x260
device_add+0x90d/0x1380
nd_async_device_register+0xe/0x50
async_run_entry_fn+0xc3/0x5d0
process_one_work+0xa0a/0x1810
worker_thread+0x87/0xe80
kthread+0x2d7/0x390
ret_from_fork+0x3a/0x50
Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init()
interface to map/unmap kasan_zero_page at requested virtual addresses.
And use it to add/remove the shadow memory for hotplugged/unplugged
device memory.
Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com
Fixes:
41e94a851304 ("add devm_memremap_pages")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Song Liu [Fri, 17 Aug 2018 22:47:00 +0000 (15:47 -0700)]
mm: thp: pass correct vm_flags to hugepage_vma_check()
khugepaged_enter_vma_merge() passes a stale vma->vm_flags to
hugepage_vma_check(). The argument vm_flags contains the latest value.
Therefore, it is necessary to pass this vm_flags into
hugepage_vma_check().
With this bug, madvise(MADV_HUGEPAGE) for mmap files in shmem fails to
put memory in huge pages. Here is an example of failed madvise():
/* mount /dev/shm with huge=advise:
* mount -o remount,huge=advise /dev/shm */
/* create file /dev/shm/huge */
#define HUGE_FILE "/dev/shm/huge"
fd = open(HUGE_FILE, O_RDONLY);
ptr = mmap(NULL, FILE_SIZE, PROT_READ, MAP_PRIVATE, fd, 0);
ret = madvise(ptr, FILE_SIZE, MADV_HUGEPAGE);
madvise() will return 0, but this memory region is never put in huge
page (check from /proc/meminfo: ShmemHugePages).
Link: http://lkml.kernel.org/r/20180629181752.792831-1-songliubraving@fb.com
Fixes:
02b75dc8160d ("mm: thp: register mm for khugepaged when merging vma for shmem")
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Ryabinin [Fri, 17 Aug 2018 22:46:57 +0000 (15:46 -0700)]
mm/fadvise.c: fix signed overflow UBSAN complaint
Signed integer overflow is undefined according to the C standard. The
overflow in ksys_fadvise64_64() is deliberate, but since it is signed
overflow, UBSAN complains:
UBSAN: Undefined behaviour in mm/fadvise.c:76:10
signed integer overflow:
4 +
9223372036854775805 cannot be represented in type 'long long int'
Use unsigned types to do math. Unsigned overflow is defined so UBSAN
will not complain about it. This patch doesn't change generated code.
[akpm@linux-foundation.org: add comment explaining the casts]
Link: http://lkml.kernel.org/r/20180629184453.7614-1-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: <icytxw@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Colin Ian King [Fri, 17 Aug 2018 22:46:54 +0000 (15:46 -0700)]
mm/swap_slots.c: make swap_slots_cache_mutex and swap_slots_cache_enable_mutex static
The mutexes swap_slots_cache_mutex and swap_slots_cache_enable_mutex are
local to the source and do not need to be in global scope, so make them
static.
Cleans up sparse warnings:
symbol 'swap_slots_cache_mutex' was not declared. Should it be static?
symbol 'swap_slots_cache_enable_mutex' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20180624182536.4937-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Colin Ian King [Fri, 17 Aug 2018 22:46:50 +0000 (15:46 -0700)]
mm/zsmalloc.c: make several functions and a struct static
The functions zs_page_isolate, zs_page_migrate, zs_page_putback,
lock_zspage, trylock_zspage and structure zsmalloc_aops are local to
source and do not need to be in global scope, so make them static.
Cleans up sparse warnings:
symbol 'zs_page_isolate' was not declared. Should it be static?
symbol 'zs_page_migrate' was not declared. Should it be static?
symbol 'zs_page_putback' was not declared. Should it be static?
symbol 'zsmalloc_aops' was not declared. Should it be static?
symbol 'lock_zspage' was not declared. Should it be static?
symbol 'trylock_zspage' was not declared. Should it be static?
[arnd@arndb.de: hide unused lock_zspage]
Link: http://lkml.kernel.org/r/20180706130924.3891230-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/20180624213322.13776-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Greg Thelen [Fri, 17 Aug 2018 22:46:47 +0000 (15:46 -0700)]
mm/page-writeback.c: update stale account_page_redirty() comment
Commit
93f78d882865 ("writeback: move backing_dev_info->bdi_stat[] into
bdi_writeback") replaced BDI_DIRTIED with WB_DIRTIED in
account_page_redirty(). Update comment to track that change.
BDI_DIRTIED => WB_DIRTIED
BDI_WRITTEN => WB_WRITTEN
Link: http://lkml.kernel.org/r/20180625171526.173483-1-gthelen@google.com
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shakeel Butt [Fri, 17 Aug 2018 22:46:44 +0000 (15:46 -0700)]
fs, mm: account buffer_head to kmemcg
The buffer_head can consume a significant amount of system memory and is
directly related to the amount of page cache. In our production
environment we have observed that a lot of machines are spending a
significant amount of memory as buffer_head and can not be left as
system memory overhead.
Charging buffer_head is not as simple as adding __GFP_ACCOUNT to the
allocation. The buffer_heads can be allocated in a memcg different from
the memcg of the page for which buffer_heads are being allocated. One
concrete example is memory reclaim. The reclaim can trigger I/O of
pages of any memcg on the system. So, the right way to charge
buffer_head is to extract the memcg from the page for which buffer_heads
are being allocated and then use targeted memcg charging API.
[shakeelb@google.com: use __GFP_ACCOUNT for directed memcg charging]
Link: http://lkml.kernel.org/r/20180702220208.213380-1-shakeelb@google.com
Link: http://lkml.kernel.org/r/20180627191250.209150-3-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shakeel Butt [Fri, 17 Aug 2018 22:46:39 +0000 (15:46 -0700)]
fs: fsnotify: account fsnotify metadata to kmemcg
Patch series "Directed kmem charging", v8.
The Linux kernel's memory cgroup allows limiting the memory usage of the
jobs running on the system to provide isolation between the jobs. All
the kernel memory allocated in the context of the job and marked with
__GFP_ACCOUNT will also be included in the memory usage and be limited
by the job's limit.
The kernel memory can only be charged to the memcg of the process in
whose context kernel memory was allocated. However there are cases
where the allocated kernel memory should be charged to the memcg
different from the current processes's memcg. This patch series
contains two such concrete use-cases i.e. fsnotify and buffer_head.
The fsnotify event objects can consume a lot of system memory for large
or unlimited queues if there is either no or slow listener. The events
are allocated in the context of the event producer. However they should
be charged to the event consumer. Similarly the buffer_head objects can
be allocated in a memcg different from the memcg of the page for which
buffer_head objects are being allocated.
To solve this issue, this patch series introduces mechanism to charge
kernel memory to a given memcg. In case of fsnotify events, the memcg
of the consumer can be used for charging and for buffer_head, the memcg
of the page can be charged. For directed charging, the caller can use
the scope API memalloc_[un]use_memcg() to specify the memcg to charge
for all the __GFP_ACCOUNT allocations within the scope.
This patch (of 2):
A lot of memory can be consumed by the events generated for the huge or
unlimited queues if there is either no or slow listener. This can cause
system level memory pressure or OOMs. So, it's better to account the
fsnotify kmem caches to the memcg of the listener.
However the listener can be in a different memcg than the memcg of the
producer and these allocations happen in the context of the event
producer. This patch introduces remote memcg charging API which the
producer can use to charge the allocations to the memcg of the listener.
There are seven fsnotify kmem caches and among them allocations from
dnotify_struct_cache, dnotify_mark_cache, fanotify_mark_cache and
inotify_inode_mark_cachep happens in the context of syscall from the
listener. So, SLAB_ACCOUNT is enough for these caches.
The objects from fsnotify_mark_connector_cachep are not accounted as
they are small compared to the notification mark or events and it is
unclear whom to account connector to since it is shared by all events
attached to the inode.
The allocations from the event caches happen in the context of the event
producer. For such caches we will need to remote charge the allocations
to the listener's memcg. Thus we save the memcg reference in the
fsnotify_group structure of the listener.
This patch has also moved the members of fsnotify_group to keep the size
same, at least for 64 bit build, even with additional member by filling
the holes.
[shakeelb@google.com: use GFP_KERNEL_ACCOUNT rather than open-coding it]
Link: http://lkml.kernel.org/r/20180702215439.211597-1-shakeelb@google.com
Link: http://lkml.kernel.org/r/20180627191250.209150-2-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin [Fri, 17 Aug 2018 22:46:36 +0000 (15:46 -0700)]
mm: introduce mem_cgroup_put() helper
Introduce the mem_cgroup_put() helper, which helps to eliminate guarding
memcg css release with "#ifdef CONFIG_MEMCG" in multiple places.
Link: http://lkml.kernel.org/r/20180623000600.5818-2-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Luis R. Rodriguez [Fri, 17 Aug 2018 22:46:32 +0000 (15:46 -0700)]
mm: provide a fallback for PAGE_KERNEL_EXEC for architectures
Some architectures just don't have PAGE_KERNEL_EXEC. The mm/nommu.c and
mm/vmalloc.c code have been using PAGE_KERNEL as a fallback for years.
Move this fallback to asm-generic.
Link: http://lkml.kernel.org/r/20180510185507.2439-3-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Luis R. Rodriguez [Fri, 17 Aug 2018 22:46:29 +0000 (15:46 -0700)]
mm: provide a fallback for PAGE_KERNEL_RO for architectures
Some architectures do not define certain PAGE_KERNEL_* flags, this is
either because:
a) The way to implement some of these flags is *not yet ported*, or
b) The architecture *has no way* to describe them
Over time we have accumulated a few PAGE_KERNEL_* fallback workarounds
for architectures in the kernel which do not define them using
*relatively safe* equivalents. Move these scattered fallback hacks into
asm-generic.
We start off with PAGE_KERNEL_RO using PAGE_KERNEL as a fallback. This
has been in place on the firmware loader for years. Move the fallback
into the respective asm-generic header.
Link: http://lkml.kernel.org/r/20180510185507.2439-2-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oscar Salvador [Fri, 17 Aug 2018 22:46:25 +0000 (15:46 -0700)]
mm/memory_hotplug.c: drop unnecessary checks from register_mem_sect_under_node()
Callers of register_mem_sect_under_node() are always passing a valid
memory_block (not NULL), so we can safely drop the check for NULL.
In the same way, register_mem_sect_under_node() is only called in case
the node is online, so we can safely remove that check as well.
Link: http://lkml.kernel.org/r/20180622111839.10071-5-osalvador@techadventures.net
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Tested-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oscar Salvador [Fri, 17 Aug 2018 22:46:22 +0000 (15:46 -0700)]
mm/memory_hotplug.c: make register_mem_sect_under_node() a callback of walk_memory_range()
link_mem_sections() and walk_memory_range() share most of the code, so
we can use convert link_mem_sections() into a dummy function that calls
walk_memory_range() with a callback to register_mem_sect_under_node().
This patch converts register_mem_sect_under_node() in order to match a
walk_memory_range's callback, getting rid of the check_nid argument and
checking instead if the system is still boothing, since we only have to
check for the nid if the system is in such state.
Link: http://lkml.kernel.org/r/20180622111839.10071-4-osalvador@techadventures.net
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Suggested-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Tested-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oscar Salvador [Fri, 17 Aug 2018 22:46:18 +0000 (15:46 -0700)]
mm/memory_hotplug.c: call register_mem_sect_under_node()
When hotplugging memory, it is possible that two calls are being made to
register_mem_sect_under_node().
One comes from __add_section()->hotplug_memory_register() and the other
from add_memory_resource()->link_mem_sections() if we had to register a
new node.
In case we had to register a new node, hotplug_memory_register() will
only handle/allocate the memory_block's since
register_mem_sect_under_node() will return right away because the node
it is not online yet.
I think it is better if we leave hotplug_memory_register() to
handle/allocate only memory_block's and make link_mem_sections() to call
register_mem_sect_under_node().
So this patch removes the call to register_mem_sect_under_node() from
hotplug_memory_register(), and moves the call to link_mem_sections() out
of the condition, so it will always be called. In this way we only have
one place where the memory sections are registered.
Link: http://lkml.kernel.org/r/20180622111839.10071-3-osalvador@techadventures.net
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Tested-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oscar Salvador [Fri, 17 Aug 2018 22:46:15 +0000 (15:46 -0700)]
mm/memory_hotplug.c: make add_memory_resource use __try_online_node
This is a small cleanup for the memhotplug code. A lot more could be
done, but it is better to start somewhere. I tried to unify/remove
duplicated code.
The following is what this patchset does:
1) add_memory_resource() has code to allocate a node in case it was
offline. Since try_online_node has some code for that as well, I just
made add_memory_resource() to use that so we can remove duplicated
code.. This is better explained in patch 1/4.
2) register_mem_sect_under_node() will be called only from
link_mem_sections()
3) Make register_mem_sect_under_node() a callback of
walk_memory_range()
4) Drop unnecessary checks from register_mem_sect_under_node()
I have done some tests and I could not see anything broken because of
this patchset.
add_memory_resource() contains code to allocate a new node in case it is
necessary. Since try_online_node() also has some code for this purpose,
let us make use of that and remove duplicate code.
This introduces __try_online_node(), which is called by
add_memory_resource() and try_online_node(). __try_online_node() has
two new parameters, start_addr of the node, and if the node should be
onlined and registered right away. This is always wanted if we are
calling from do_cpu_up(), but not when we are calling from memhotplug
code. Nothing changes from the point of view of the users of
try_online_node(), since try_online_node passes start_addr=0 and
online_node=true to __try_online_node().
Link: http://lkml.kernel.org/r/20180622111839.10071-2-osalvador@techadventures.net
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Tested-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / platform / kernel / linux-rpi.git / log