scsi: sd: Revert "scsi: sd: Remove a local variable"

This reverts commit 84f7a9de0602704bbec774a6c7f7c8c4994bee9c.

Because it introduces a problem that rq->__data_len is set to the wrong
value.

before the patch:
1) nr_bytes = rq->__data_len
2) rq->__data_len = sdp->sector_size
3) scsi_init_io()
4) rq->__data_len = nr_bytes

after the patch:
1) rq->__data_len = sdp->sector_size
2) scsi_init_io()
3) rq->__data_len = rq->__data_len -> __data_len is wrong

It will cause that io can only complete one segment each time, and the io
will requeue in scsi_io_completion_action(), which will cause severe
performance degradation.

Scsi write same is removed in commit e383e16e84e9 ("scsi: sd: Remove
WRITE_SAME support") from mainline, hence this patch is only needed for
stable kernels.

Fixes: 84f7a9de0602 ("scsi: sd: Remove a local variable")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Add AMPERE1 to the Spectre-BHB affected list

[ Upstream commit 0e5d5ae837c8ce04d2ddb874ec5f920118bd9d31 ]

Per AmpereOne erratum AC03_CPU_12, "Branch history may allow control of
speculative execution across software contexts," the AMPERE1 core needs the
bhb clearing loop to mitigate Spectre-BHB, with a loop iteration count of
11.

Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20221011022140.432370-1-scott@os.amperecomputing.com
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: enetc: survive memory pressure without crashing

[ Upstream commit 84ce1ca3fe9e1249bf21176ff162200f1c4e5ed1 ]

Under memory pressure, enetc_refill_rx_ring() may fail, and when called
during the enetc_open() -> enetc_setup_rxbdr() procedure, this is not
checked for.

An extreme case of memory pressure will result in exactly zero buffers
being allocated for the RX ring, and in such a case it is expected that
hardware drops all RX packets due to lack of buffers.

This does not happen, because the reset-default value of the consumer
and produces index is 0, and this makes the ENETC think that all buffers
have been initialized and that it owns them (when in reality none were).

The hardware guide explains this best:

| Configure the receive ring producer index register RBaPIR with a value
| of 0. The producer index is initially configured by software but owned
| by hardware after the ring has been enabled. Hardware increments the
| index when a frame is received which may consume one or more BDs.
| Hardware is not allowed to increment the producer index to match the
| consumer index since it is used to indicate an empty condition. The ring
| can hold at most RBLENR[LENGTH]-1 received BDs.
|
| Configure the receive ring consumer index register RBaCIR. The
| consumer index is owned by software and updated during operation of the
| of the BD ring by software, to indicate that any receive data occupied
| in the BD has been processed and it has been prepared for new data.
| - If consumer index and producer index are initialized to the same
|   value, it indicates that all BDs in the ring have been prepared and
|   hardware owns all of the entries.
| - If consumer index is initialized to producer index plus N, it would
|   indicate N BDs have been prepared. Note that hardware cannot start if
|   only a single buffer is prepared due to the restrictions described in
|   (2).
| - Software may write consumer index to match producer index anytime
|   while the ring is operational to indicate all received BDs prior have
|   been processed and new BDs prepared for hardware.

Normally, the value of rx_ring->rcir (consumer index) is brought in sync
with the rx_ring->next_to_use software index, but this only happens if
page allocation ever succeeded.

When PI==CI==0, the hardware appears to receive frames and write them to
DMA address 0x0 (?!), then set the READY bit in the BD.

The enetc_clean_rx_ring() function (and its XDP derivative) is naturally
not prepared to handle such a condition. It will attempt to process
those frames using the rx_swbd structure associated with index i of the
RX ring, but that structure is not fully initialized (enetc_new_page()
does all of that). So what happens next is undefined behavior.

To operate using no buffer, we must initialize the CI to PI + 1, which
will block the hardware from advancing the CI any further, and drop
everything.

The issue was seen while adding support for zero-copy AF_XDP sockets,
where buffer memory comes from user space, which can even decide to
supply no buffers at all (example: "xdpsock --txonly"). However, the bug
is present also with the network stack code, even though it would take a
very determined person to trigger a page allocation failure at the
perfect time (a series of ifup/ifdown under memory pressure should
eventually reproduce it given enough retries).

Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20221027182925.3256653-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kcm: do not sense pfmemalloc status in kcm_sendpage()

[ Upstream commit ee15e1f38dc201fa7d63c13aa258b728dce27f4d ]

Similar to changes done in TCP in blamed commit.
We should not sense pfmemalloc status in sendpage() methods.

Fixes: 326140063946 ("tcp: TX zerocopy should not sense pfmemalloc status")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221027040637.1107703-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: do not sense pfmemalloc status in skb_append_pagefrags()

[ Upstream commit 228ebc41dfab5b5d34cd76835ddb0ca8ee12f513 ]

skb_append_pagefrags() is used by af_unix and udp sendpage()
implementation so far.

In commit 326140063946 ("tcp: TX zerocopy should not sense
pfmemalloc status") we explained why we should not sense
pfmemalloc status for pages owned by user space.

We should also use skb_fill_page_desc_noacc()
in skb_append_pagefrags() to avoid following KCSAN report:

BUG: KCSAN: data-race in lru_add_fn / skb_append_pagefrags

write to 0xffffea00058fc1c8 of 8 bytes by task 17319 on cpu 0:
__list_add include/linux/list.h:73 [inline]
list_add include/linux/list.h:88 [inline]
lruvec_add_folio include/linux/mm_inline.h:323 [inline]
lru_add_fn+0x327/0x410 mm/swap.c:228
folio_batch_move_lru+0x1e1/0x2a0 mm/swap.c:246
lru_add_drain_cpu+0x73/0x250 mm/swap.c:669
lru_add_drain+0x21/0x60 mm/swap.c:773
free_pages_and_swap_cache+0x16/0x70 mm/swap_state.c:311
tlb_batch_pages_flush mm/mmu_gather.c:59 [inline]
tlb_flush_mmu_free mm/mmu_gather.c:256 [inline]
tlb_flush_mmu+0x5b2/0x640 mm/mmu_gather.c:263
tlb_finish_mmu+0x86/0x100 mm/mmu_gather.c:363
exit_mmap+0x190/0x4d0 mm/mmap.c:3098
__mmput+0x27/0x1b0 kernel/fork.c:1185
mmput+0x3d/0x50 kernel/fork.c:1207
copy_process+0x19fc/0x2100 kernel/fork.c:2518
kernel_clone+0x166/0x550 kernel/fork.c:2671
__do_sys_clone kernel/fork.c:2812 [inline]
__se_sys_clone kernel/fork.c:2796 [inline]
__x64_sys_clone+0xc3/0xf0 kernel/fork.c:2796
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffffea00058fc1c8 of 8 bytes by task 17325 on cpu 1:
page_is_pfmemalloc include/linux/mm.h:1817 [inline]
__skb_fill_page_desc include/linux/skbuff.h:2432 [inline]
skb_fill_page_desc include/linux/skbuff.h:2453 [inline]
skb_append_pagefrags+0x210/0x600 net/core/skbuff.c:3974
unix_stream_sendpage+0x45e/0x990 net/unix/af_unix.c:2338
kernel_sendpage+0x184/0x300 net/socket.c:3561
sock_sendpage+0x5a/0x70 net/socket.c:1054
pipe_to_sendpage+0x128/0x160 fs/splice.c:361
splice_from_pipe_feed fs/splice.c:415 [inline]
__splice_from_pipe+0x222/0x4d0 fs/splice.c:559
splice_from_pipe fs/splice.c:594 [inline]
generic_splice_sendpage+0x89/0xc0 fs/splice.c:743
do_splice_from fs/splice.c:764 [inline]
direct_splice_actor+0x80/0xa0 fs/splice.c:931
splice_direct_to_actor+0x305/0x620 fs/splice.c:886
do_splice_direct+0xfb/0x180 fs/splice.c:974
do_sendfile+0x3bf/0x910 fs/read_write.c:1255
__do_sys_sendfile64 fs/read_write.c:1323 [inline]
__se_sys_sendfile64 fs/read_write.c:1309 [inline]
__x64_sys_sendfile64+0x10c/0x150 fs/read_write.c:1309
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x0000000000000000 -> 0xffffea00058fc188

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 17325 Comm: syz-executor.0 Not tainted 6.1.0-rc1-syzkaller-00158-g440b7895c990-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022

Fixes: 326140063946 ("tcp: TX zerocopy should not sense pfmemalloc status")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221027040346.1104204-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Fix crash during sync firmware reset

[ Upstream commit aefb62a9988749703435e941704624949a80a2a9 ]

When setting Bluefield to DPU NIC mode using mlxconfig tool +  sync
firmware reset flow, we run into scenario where the host was not
eswitch manager at the time of mlx5 driver load but becomes eswitch manager
after the sync firmware reset flow. This results in null pointer
access of mpfs structure during mac filter add. This change prevents null
pointer access but mpfs table entries will not be added.

Fixes: 5ec697446f46 ("net/mlx5: Add support for devlink reload action fw activate")
Signed-off-by: Suresh Devarakonda <ramad@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-12-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Update fw fatal reporter state on PCI handlers successful recover

[ Upstream commit 416ef713631937cf5452476a7f1041a3ae7b06c6 ]

Update devlink health fw fatal reporter state to "healthy" is needed by
strictly calling devlink_health_reporter_state_update() after recovery
was done by PCI error handler. This is needed when fw_fatal reporter was
triggered due to PCI error. Poll health is called and set reporter state
to error. Health recovery failed (since EEH didn't re-enable the PCI).
PCI handlers keep on recover flow and succeed later without devlink
acknowledgment. Fix this by adding devlink state update at the end of
the PCI handler recovery process.

Fixes: 6181e5cb752e ("devlink: add support for reporter recovery completion")
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-11-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Print more info on pci error handlers

[ Upstream commit fad1783a6d669ac82b6ea4f2f32b4ba2b5484920 ]

In case mlx5_pci_err_detected was called with state equals to
pci_channel_io_perm_failure, the driver will never come back up.

It is nice to know why the driver went to zombie land, so print some
useful information on pci err handlers.

Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Stable-dep-of: 416ef7136319 ("net/mlx5: Update fw fatal reporter state on PCI handlers successful recover")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Fix possible use-after-free in async command interface

[ Upstream commit bacd22df95147ed673bec4692ab2d4d585935241 ]

mlx5_cmd_cleanup_async_ctx should return only after all its callback
handlers were completed. Before this patch, the below race between
mlx5_cmd_cleanup_async_ctx and mlx5_cmd_exec_cb_handler was possible and
lead to a use-after-free:

1. mlx5_cmd_cleanup_async_ctx is called while num_inflight is 2 (i.e.
   elevated by 1, a single inflight callback).
2. mlx5_cmd_cleanup_async_ctx decreases num_inflight to 1.
3. mlx5_cmd_exec_cb_handler is called, decreases num_inflight to 0 and
   is about to call wake_up().
4. mlx5_cmd_cleanup_async_ctx calls wait_event, which returns
   immediately as the condition (num_inflight == 0) holds.
5. mlx5_cmd_cleanup_async_ctx returns.
6. The caller of mlx5_cmd_cleanup_async_ctx frees the mlx5_async_ctx
   object.
7. mlx5_cmd_exec_cb_handler goes on and calls wake_up() on the freed
   object.

Fix it by syncing using a completion object. Mark it completed when
num_inflight reaches 0.

Trace:

BUG: KASAN: use-after-free in do_raw_spin_lock+0x23d/0x270
Read of size 4 at addr ffff888139cd12f4 by task swapper/5/0

CPU: 5 PID: 0 Comm: swapper/5 Not tainted 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
 <IRQ>
 dump_stack_lvl+0x57/0x7d
 print_report.cold+0x2d5/0x684
 ? do_raw_spin_lock+0x23d/0x270
 kasan_report+0xb1/0x1a0
 ? do_raw_spin_lock+0x23d/0x270
 do_raw_spin_lock+0x23d/0x270
 ? rwlock_bug.part.0+0x90/0x90
 ? __delete_object+0xb8/0x100
 ? lock_downgrade+0x6e0/0x6e0
 _raw_spin_lock_irqsave+0x43/0x60
 ? __wake_up_common_lock+0xb9/0x140
 __wake_up_common_lock+0xb9/0x140
 ? __wake_up_common+0x650/0x650
 ? destroy_tis_callback+0x53/0x70 [mlx5_core]
 ? kasan_set_track+0x21/0x30
 ? destroy_tis_callback+0x53/0x70 [mlx5_core]
 ? kfree+0x1ba/0x520
 ? do_raw_spin_unlock+0x54/0x220
 mlx5_cmd_exec_cb_handler+0x136/0x1a0 [mlx5_core]
 ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core]
 ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core]
 mlx5_cmd_comp_handler+0x65a/0x12b0 [mlx5_core]
 ? dump_command+0xcc0/0xcc0 [mlx5_core]
 ? lockdep_hardirqs_on_prepare+0x400/0x400
 ? cmd_comp_notifier+0x7e/0xb0 [mlx5_core]
 cmd_comp_notifier+0x7e/0xb0 [mlx5_core]
 atomic_notifier_call_chain+0xd7/0x1d0
 mlx5_eq_async_int+0x3ce/0xa20 [mlx5_core]
 atomic_notifier_call_chain+0xd7/0x1d0
 ? irq_release+0x140/0x140 [mlx5_core]
 irq_int_handler+0x19/0x30 [mlx5_core]
 __handle_irq_event_percpu+0x1f2/0x620
 handle_irq_event+0xb2/0x1d0
 handle_edge_irq+0x21e/0xb00
 __common_interrupt+0x79/0x1a0
 common_interrupt+0x78/0xa0
 </IRQ>
 <TASK>
 asm_common_interrupt+0x22/0x40
RIP: 0010:default_idle+0x42/0x60
Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 0f b6 14 11 38 d0 7c 04 84 d2 75 14 8b 05 eb 47 22 02 85 c0 7e 07 0f 00 2d e0 9f 48 00 fb f4 <c3> 48 c7 c7 80 08 7f 85 e8 d1 d3 3e fe eb de 66 66 2e 0f 1f 84 00
RSP: 0018:ffff888100dbfdf0 EFLAGS: 00000242
RAX: 0000000000000001 RBX: ffffffff84ecbd48 RCX: 1ffffffff0afe110
RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff835cc9bc
RBP: 0000000000000005 R08: 0000000000000001 R09: ffff88881dec4ac3
R10: ffffed1103bd8958 R11: 0000017d0ca571c9 R12: 0000000000000005
R13: ffffffff84f024e0 R14: 0000000000000000 R15: dffffc0000000000
 ? default_idle_call+0xcc/0x450
 default_idle_call+0xec/0x450
 do_idle+0x394/0x450
 ? arch_cpu_idle_exit+0x40/0x40
 ? do_idle+0x17/0x450
 cpu_startup_entry+0x19/0x20
 start_secondary+0x221/0x2b0
 ? set_cpu_sibling_map+0x2070/0x2070
 secondary_startup_64_no_verify+0xcd/0xdb
 </TASK>

Allocated by task 49502:
 kasan_save_stack+0x1e/0x40
 __kasan_kmalloc+0x81/0xa0
 kvmalloc_node+0x48/0xe0
 mlx5e_bulk_async_init+0x35/0x110 [mlx5_core]
 mlx5e_tls_priv_tx_list_cleanup+0x84/0x3e0 [mlx5_core]
 mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core]
 mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core]
 mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core]
 mlx5e_suspend+0xdb/0x140 [mlx5_core]
 mlx5e_remove+0x89/0x190 [mlx5_core]
 auxiliary_bus_remove+0x52/0x70
 device_release_driver_internal+0x40f/0x650
 driver_detach+0xc1/0x180
 bus_remove_driver+0x125/0x2f0
 auxiliary_driver_unregister+0x16/0x50
 mlx5e_cleanup+0x26/0x30 [mlx5_core]
 cleanup+0xc/0x4e [mlx5_core]
 __x64_sys_delete_module+0x2b5/0x450
 do_syscall_64+0x3d/0x90
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Freed by task 49502:
 kasan_save_stack+0x1e/0x40
 kasan_set_track+0x21/0x30
 kasan_set_free_info+0x20/0x30
 ____kasan_slab_free+0x11d/0x1b0
 kfree+0x1ba/0x520
 mlx5e_tls_priv_tx_list_cleanup+0x2e7/0x3e0 [mlx5_core]
 mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core]
 mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core]
 mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core]
 mlx5e_suspend+0xdb/0x140 [mlx5_core]
 mlx5e_remove+0x89/0x190 [mlx5_core]
 auxiliary_bus_remove+0x52/0x70
 device_release_driver_internal+0x40f/0x650
 driver_detach+0xc1/0x180
 bus_remove_driver+0x125/0x2f0
 auxiliary_driver_unregister+0x16/0x50
 mlx5e_cleanup+0x26/0x30 [mlx5_core]
 cleanup+0xc/0x4e [mlx5_core]
 __x64_sys_delete_module+0x2b5/0x450
 do_syscall_64+0x3d/0x90
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fixes: e355477ed9e4 ("net/mlx5: Make mlx5_cmd_exec_cb() a safe API")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-8-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Extend SKB room check to include PTP-SQ

[ Upstream commit 19b43a432e3e47db656a8269a74b50aef826950c ]

When tx_port_ts is set, the driver diverts all UPD traffic over PTP port
to a dedicated PTP-SQ. The SKBs are cached until the wire-CQE arrives.
When the packet size is greater then MTU, the firmware might drop it and
the packet won't be transmitted to the wire, hence the wire-CQE won't
reach the driver. In this case the SKBs are accumulated in the SKB fifo.
Add room check to consider the PTP-SQ SKB fifo, when the SKB fifo is
full, driver stops the queue resulting in a TX timeout. Devlink
TX-reporter can recover from it.

Fixes: 1880bc4e4a96 ("net/mlx5e: Add TX port timestamp support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Do not increment ESN when updating IPsec ESN state

[ Upstream commit 888be6b279b7257b5f6e4c9527675bff0a335596 ]

An offloaded SA stops receiving after about 2^32 + replay_window
packets. For example, when SA reaches <seq-hi 0x1, seq 0x2c>, all
subsequent packets get dropped with SA-icv-failure (integrity_failed).

To reproduce the bug:
- ConnectX-6 Dx with crypto enabled (FW 22.30.1004)
- ipsec.conf:
  nic-offload = yes
  replay-window = 32
  esn = yes
  salifetime=24h
- Run netperf for a long time to send more than 2^32 packets
  netperf -H <device-under-test> -t TCP_STREAM -l 20000

When 2^32 + replay_window packets are received, the replay window
moves from the 2nd half of subspace (overlap=1) to the 1st half
(overlap=0). The driver then updates the 'esn' value in NIC
(i.e. seq_hi) as follows.

 seq_hi = xfrm_replay_seqhi(seq_bottom)
 new esn in NIC = seq_hi + 1

The +1 increment is wrong, as seq_hi already contains the correct
seq_hi. For example, when seq_hi=1, the driver actually tells NIC to
use seq_hi=2 (esn). This incorrect esn value causes all subsequent
packets to fail integrity checks (SA-icv-failure). So, do not
increment.

Fixes: cb01008390bb ("net/mlx5: IPSec, Add support for ESN")
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netdevsim: remove dir in nsim_dev_debugfs_init() when creating ports dir failed

[ Upstream commit a6aa8d0ce2cfba57ac0f23293fcb3be0b9f53fba ]

Remove dir in nsim_dev_debugfs_init() when creating ports dir failed.
Otherwise, the netdevsim device will not be created next time. Kernel
reports an error: debugfs: Directory 'netdevsim1' with parent 'netdevsim'
already present!

Fixes: ab1d0cc004d7 ("netdevsim: change debugfs tree topology")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: broadcom: bcm4908_enet: update TX stats after actual transmission

[ Upstream commit ef3556ee16c68735ec69bd08df41d1cd83b14ad3 ]

Queueing packets doesn't guarantee their transmission. Update TX stats
after hardware confirms consuming submitted data.

This also fixes a possible race and NULL dereference.
bcm4908_enet_start_xmit() could try to access skb after freeing it in
the bcm4908_enet_poll_tx().

Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: 4feffeadbcb2e ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221027112430.8696-1-zajec5@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: broadcom: bcm4908enet: remove redundant variable bytes

[ Upstream commit 62a3106697f3c6f9af64a2cd0f9ff58552010dc8 ]

The variable bytes is being used to summate slot lengths,
however the value is never used afterwards. The summation
is redundant so remove variable bytes.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20211222003937.727325-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: ef3556ee16c6 ("net: broadcom: bcm4908_enet: update TX stats after actual transmission")
Signed-off-by: Sasha Levin <sashal@kernel.org>

nh: fix scope used to find saddr when adding non gw nh

[ Upstream commit bac0f937c343d651874f83b265ca8f5070ed4f06 ]

As explained by Julian, fib_nh_scope is related to fib_nh_gw4, but
fib_info_update_nhc_saddr() needs the scope of the route, which is
the scope "before" fib_nh_scope, ie fib_nh_scope - 1.

This patch fixes the problem described in commit 747c14307214 ("ip: fix
dflt addr selection for connected nexthop").

Fixes: 597cfe4fc339 ("nexthop: Add support for IPv4 nexthops")
Link: https://lore.kernel.org/netdev/6c8a44ba-c2d5-cdf-c5c7-5baf97cba38@ssi.bg/
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bcmsysport: Indicate MAC is in charge of PHY PM

[ Upstream commit 9f172134dde7e4f5bf4b9139f23a1e741ec1c36e ]

Avoid the PHY library call unnecessarily into the suspend/resume
functions by setting phydev->mac_managed_pm to true. The SYSTEMPORT
driver essentially does exactly what mdio_bus_phy_resume() does by
calling phy_resume().

Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221025234201.2549360-1-f.fainelli@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ehea: fix possible memory leak in ehea_register_port()

[ Upstream commit 0e7ce23a917a9cc83ca3c779fbba836bca3bcf1e ]

If of_device_register() returns error, the of node and the
name allocated in dev_set_name() is leaked, call put_device()
to give up the reference that was set in device_initialize(),
so that of node is put in logical_port_release() and the name
is freed in kobject_cleanup().

Fixes: 1acf2318dd13 ("ehea: dynamic add / remove port")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221025130011.1071357-1-yangyingliang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

openvswitch: switch from WARN to pr_warn

[ Upstream commit fd954cc1919e35cb92f78671cab6e42d661945a3 ]

As noted by Paolo Abeni, pr_warn doesn't generate any splat and can still
preserve the warning to the user that feature downgrade occurred.  We
likely cannot introduce other kinds of checks / enforcement here because
syzbot can generate different genl versions to the datapath.

Reported-by: syzbot+31cde0bef4bbf8ba2d86@syzkaller.appspotmail.com
Fixes: 44da5ae5fbea ("openvswitch: Drop user features if old user space attempted to create datapath")
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: aoa: Fix I2S device accounting

[ Upstream commit f1fae475f10a26b7e34da4ff2e2f19b7feb3548e ]

i2sbus_add_dev() is supposed to return the number of probed devices,
i.e. either 1 or 0.  However, i2sbus_add_dev() has one error handling
that returns -ENODEV; this will screw up the accumulation number
counted in the caller, i2sbus_probe().

Fix the return value to 0 and add the comment for better understanding
for readers.

Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa")
Link: https://lore.kernel.org/r/20221027065233.13292-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: aoa: i2sbus: fix possible memory leak in i2sbus_add_dev()

[ Upstream commit 4a4c8482e370d697738a78dcd7bf2780832cb712 ]

dev_set_name() in soundbus_add_one() allocates memory for name, it need be
freed when of_device_register() fails, call soundbus_dev_put() to give up
the reference that hold in device_initialize(), so that it can be freed in
kobject_cleanup() when the refcount hit to 0. And other resources are also
freed in i2sbus_release_dev(), so it can return 0 directly.

Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221027013438.991920-1-yangyingliang@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: ave: Fix MAC to be in charge of PHY PM

[ Upstream commit e2badb4bd33abe13ddc35975bd7f7f8693955a4b ]

The phylib callback is called after MAC driver's own resume callback is
called. For AVE driver, after resuming immediately, PHY state machine is
in PHY_NOLINK because there is a time lag from link-down to link-up due to
autoneg. The result is WARN_ON() dump in mdio_bus_phy_resume().

Since ave_resume() itself calls phy_resume(), AVE driver should manage
PHY PM. To indicate that MAC driver manages PHY PM, set
phydev->mac_managed_pm to true to avoid the unnecessary phylib call and
add missing phy_init_hw() to ave_resume().

Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20221024072227.24769-1-hayashi.kunihiko@socionext.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fec: limit register access on i.MX6UL

[ Upstream commit 0a8b43b12dd78daa77a7dc007b92770d262a2714 ]

Using 'ethtool -d […]' on an i.MX6UL leads to a kernel crash:

   Unhandled fault: external abort on non-linefetch (0x1008) at […]

due to this SoC has less registers in its FEC implementation compared to other
i.MX6 variants. Thus, a run-time decision is required to avoid access to
non-existing registers.

Fixes: a51d3ab50702 ("net: fec: use a more proper compatible string for i.MX6UL type device")
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221024080552.21004-1-jbe@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf vendor events arm64: Fix incorrect Hisi hip08 L3 metrics

[ Upstream commit e9229d5b6254a75291536f582652c599957344d2 ]

Commit 0cc177cfc95d565e ("perf vendor events arm64: Add Hisi hip08 L3
metrics") add L3 metrics of hip08, but some metrics (IF_BP_MISP_BR_RET,
IF_BP_MISP_BR_RET, IF_BP_MISP_BR_BL) have incorrect event number due to
the mistakes in document, which caused incorrect result. Fix the
incorrect metrics.

Before:

  65,811,214,308 armv8_pmuv3_0/event=0x1014/ # 18.87 push_branch
   # -40.19 other_branch
  3,564,316,780 BR_MIS_PRED # 0.51 indirect_branch
   # 21.81 pop_branch

After:

  6,537,146,245 BR_MIS_PRED # 0.48 indirect_branch
   # 0.47 pop_branch
   # 0.00 push_branch
   # 0.05 other_branch

Fixes: 0cc177cfc95d565e ("perf vendor events arm64: Add Hisi hip08 L3 metrics")
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Acked-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221021105035.10000-2-shangxiaojing@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: domains: Fix handling of unavailable/disabled idle states

[ Upstream commit e0c57a5c70c13317238cb19a7ded0eab4a5f7de5 ]

Platforms can provide the information about the availability of each
idle states via status flag. Platforms may have to disable one or more
idle states for various reasons like broken firmware or other unmet
dependencies.

Fix handling of such unavailable/disabled idle states by ignoring them
while parsing the states.

Fixes: a3381e3a65cb ("PM / domains: Fix up domain-idle-states OF parsing")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ksz884x: fix missing pci_disable_device() on error in pcidev_init()

[ Upstream commit 5da6d65590a0698199df44d095e54b0ed1708178 ]

pci_disable_device() need be called while module exiting, switch to use
pcim_enable(), pci_disable_device() will be called in pcim_release()
while unbinding device.

Fixes: 8ca86fd83eae ("net: Micrel KSZ8841/2 PCI Ethernet driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221024131338.2848959-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix flow-type by setting GL_HASH_INSET registers

[ Upstream commit 3b32c9932853e11d71f9db012d69e92e4669ba23 ]

Fix setting bits for specific flow_type for GLQF_HASH_INSET register.
In previous version all of the bits were set only in hena register, while
in inset only one bit was set. In order for this working correctly on all
types of cards these bits needs to be set correctly for both hena and inset
registers.

Fixes: eb0dd6e4a3b3 ("i40e: Allow RSS Hash set with less than four parameters")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20221024100526.1874914-3-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix VF hang when reset is triggered on another VF

[ Upstream commit 52424f974bc53c26ba3f00300a00e9de9afcd972 ]

When a reset was triggered on one VF with i40e_reset_vf
global PF state __I40E_VF_DISABLE was set on a PF until
the reset finished. If immediately after triggering reset
on one VF there is a request to reset on another
it will cause a hang on VF side because VF will be notified
of incoming reset but the reset will never happen because
of this global state, we will get such error message:

[  +4.890195] iavf 0000:86:02.1: Never saw reset

and VF will hang waiting for the reset to be triggered.

Fix this by introducing new VF state I40E_VF_STATE_RESETTING
that will be set on a VF if it is currently resetting instead of
the global __I40E_VF_DISABLE PF state.

Fixes: 3ba9bcb4b68f ("i40e: add locking around VF reset")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20221024100526.1874914-2-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix ethtool rx-flow-hash setting for X722

[ Upstream commit 54b5af5a438076082d482cab105b1bd484ab5074 ]

When enabling flow type for RSS hash via ethtool:

ethtool -N $pf rx-flow-hash tcp4|tcp6|udp4|udp6 s|d

the driver would fail to setup this setting on X722
device since it was using the mask on the register
dedicated for X710 devices.

Apply a different mask on the register when setting the
RSS hash for the X722 device.

When displaying the flow types enabled via ethtool:

ethtool -n $pf rx-flow-hash tcp4|tcp6|udp4|udp6

the driver would print wrong values for X722 device.

Fix this issue by testing masks for X722 device in
i40e_get_rss_hash_opts function.

Fixes: eb0dd6e4a3b3 ("i40e: Allow RSS Hash set with less than four parameters")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20221024100526.1874914-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: ensure sane device mtu in tunnels

[ Upstream commit d89d7ff01235f218dad37de84457717f699dee79 ]

Another syzbot report [1] with no reproducer hints
at a bug in ip6_gre tunnel (dev:ip6gretap0)

Since ipv6 mcast code makes sure to read dev->mtu once
and applies a sanity check on it (see commit b9b312a7a451
"ipv6: mcast: better catch silly mtu values"), a remaining
possibility is that a layer is able to set dev->mtu to
an underflowed value (high order bit set).

This could happen indeed in ip6gre_tnl_link_config_route(),
ip6_tnl_link_config() and ipip6_tunnel_bind_dev()

Make sure to sanitize mtu value in a local variable before
it is written once on dev->mtu, as lockless readers could
catch wrong temporary value.

[1]
skbuff: skb_over_panic: text:ffff80000b7a2f38 len:40 put:40 head:ffff000149dcf200 data:ffff000149dcf2b0 tail:0xd8 end:0xc0 dev:ip6gretap0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:120
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 10241 Comm: kworker/1:1 Not tainted 6.0.0-rc7-syzkaller-18095-gbbed346d5a96 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/30/2022
Workqueue: mld mld_ifc_work
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_panic+0x4c/0x50 net/core/skbuff.c:116
lr : skb_panic+0x4c/0x50 net/core/skbuff.c:116
sp : ffff800020dd3b60
x29: ffff800020dd3b70 x28: 0000000000000000 x27: ffff00010df2a800
x26: 00000000000000c0 x25: 00000000000000b0 x24: ffff000149dcf200
x23: 00000000000000c0 x22: 00000000000000d8 x21: ffff80000b7a2f38
x20: ffff00014c2f7800 x19: 0000000000000028 x18: 00000000000001a9
x17: 0000000000000000 x16: ffff80000db49158 x15: ffff000113bf1a80
x14: 0000000000000000 x13: 00000000ffffffff x12: ffff000113bf1a80
x11: ff808000081c0d5c x10: 0000000000000000 x9 : 73f125dc5c63ba00
x8 : 73f125dc5c63ba00 x7 : ffff800008161d1c x6 : 0000000000000000
x5 : 0000000000000080 x4 : 0000000000000001 x3 : 0000000000000000
x2 : ffff0001fefddcd0 x1 : 0000000100000000 x0 : 0000000000000089
Call trace:
skb_panic+0x4c/0x50 net/core/skbuff.c:116
skb_over_panic net/core/skbuff.c:125 [inline]
skb_put+0xd4/0xdc net/core/skbuff.c:2049
ip6_mc_hdr net/ipv6/mcast.c:1714 [inline]
mld_newpack+0x14c/0x270 net/ipv6/mcast.c:1765
add_grhead net/ipv6/mcast.c:1851 [inline]
add_grec+0xa20/0xae0 net/ipv6/mcast.c:1989
mld_send_cr+0x438/0x5a8 net/ipv6/mcast.c:2115
mld_ifc_work+0x38/0x290 net/ipv6/mcast.c:2653
process_one_work+0x2d8/0x504 kernel/workqueue.c:2289
worker_thread+0x340/0x610 kernel/workqueue.c:2436
kthread+0x12c/0x158 kernel/kthread.c:376
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860
Code: 91011400 aa0803e1 a90027ea 94373093 (d4210000)

Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221024020124.3756833-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf vendor events power10: Fix hv-24x7 metric events

[ Upstream commit b92dd11725a7c57f55e148c7d3ce58a86f480575 ]

Testcase stat_all_metrics.sh fails in powerpc:

  90: perf all metrics test : FAILED!

The testcase "stat_all_metrics.sh" verifies perf stat result for all the
metric events present in perf list.  It runs perf metric events with
various commands and expects non-empty metric result.

Incase of powerpc:hv-24x7 events, some of the event count can be 0 based
on system configuration. And if that event used as denominator in divide
equation, it can cause divide by 0 error. The current nest_metric.json
file creating divide by 0 issue for some of the metric events, which
results in failure of the "stat_all_metrics.sh" test case.

Most of the metrics events have cycles or an event which expect to have
a larger value as denominator, so adding 1 to the denominator of the
metric expression as a fix.

Result in powerpc box after this patch changes:

  90: perf all metrics test : Ok

Fixes: a3cbcadfdfc330c2 ("perf vendor events power10: Adds 24x7 nest metric events for power10 platform")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20221014140220.122251-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vivid: set num_in/outputs to 0 if not supported

[ Upstream commit 69d78a80da4ef12faf2a6f9cfa2097ab4ac43983 ]

If node_types does not have video/vbi/meta inputs or outputs,
then set num_inputs/num_outputs to 0 instead of 1.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 0c90f649d2f5 (media: vivid: add vivid_create_queue() helper)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: videodev2.h: V4L2_DV_BT_BLANKING_HEIGHT should check 'interlaced'

[ Upstream commit 8da7f0976b9071b528c545008de9d10cc81883b1 ]

If it is a progressive (non-interlaced) format, then ignore the
interlaced timing values.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 7f68127fa11f ([media] videodev2.h: defines to calculate blanking and frame sizes)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: v4l2-dv-timings: add sanity checks for blanking values

[ Upstream commit 4b6d66a45ed34a15721cb9e11492fa1a24bc83df ]

Add sanity checks to v4l2_valid_dv_timings() to ensure that the provided
blanking values are reasonable.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: b18787ed1ce3 ([media] v4l2-dv-timings: add new helper module)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vivid: dev->bitmap_cap wasn't freed in all cases

[ Upstream commit 1f65ea411cc7b6ff128d82a3493d7b5648054e6f ]

Whenever the compose width/height values change, the dev->bitmap_cap
vmalloc'ed array must be freed and dev->bitmap_cap set to NULL.

This was done in some places, but not all. This is only an issue if
overlay support is enabled and the bitmap clipping is used.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vivid: s_fbuf: add more sanity checks

[ Upstream commit f8bcaf714abfc94818dff8c0db84d750433984f4 ]

VIDIOC_S_FBUF is by definition a scary ioctl, which is why only root
can use it. But at least check if the framebuffer parameters match that
of one of the framebuffer created by vivid, and reject anything else.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: hibernate: Allow hybrid sleep to work with s2idle

[ Upstream commit 85850af4fc47132f3f2f0dd698b90f67906600b4 ]

Hybrid sleep is currently hardcoded to only operate with S3 even
on systems that might not support it.

Instead of assuming this mode is what the user wants to use, for
hybrid sleep follow the setting of `mem_sleep_current` which
will respect mem_sleep_default kernel command line and policy
decisions made by the presence of the FADT low power idle bit.

Fixes: 81d45bdf8913 ("PM / hibernate: Untangle power_down()")
Reported-and-tested-by: kolAflash <kolAflash@kolahilft.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216574
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: mcp251x: mcp251x_can_probe(): add missing unregister_candev() in error path

[ Upstream commit b1a09b63684cea56774786ca14c13b7041ffee63 ]

In mcp251x_can_probe(), if mcp251x_gpio_setup() fails, it forgets to
unregister the CAN device.

Fix this by unregistering can device in mcp251x_can_probe().

Fixes: 2d52dabbef60 ("can: mcp251x: add GPIO support")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/all/20221024090256.717236-1-dzm91@hust.edu.cn
[mkl: adjust label]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: mscan: mpc5xxx: mpc5xxx_can_probe(): add missing put_clock() in error path

[ Upstream commit 3e5b3418827cefb5e1cc658806f02965791b8f07 ]

The commit 1149108e2fbf ("can: mscan: improve clock API use") only
adds put_clock() in mpc5xxx_can_remove() function, forgetting to add
put_clock() in the error handling code.

Fix this bug by adding put_clock() in the error handling code.

Fixes: 1149108e2fbf ("can: mscan: improve clock API use")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/all/20221024133828.35881-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fix memory leak in kfd_mem_dmamap_userptr()

[ Upstream commit 90bfee142af0f0e9d3bec80e7acd5f49b230acf7 ]

If the number of pages from the userptr BO differs from the SG BO then the
allocated memory for the SG table doesn't get freed before returning
-EINVAL, which may lead to a memory leak in some error paths. Fix this by
checking the number of pages before allocating memory for the SG table.

Fixes: 264fb4d332f5 ("drm/amdgpu: Add multi-GPU DMA mapping helpers")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net-memcg: avoid stalls when under memory pressure

[ Upstream commit 720ca52bcef225b967a339e0fffb6d0c7e962240 ]

As Shakeel explains the commit under Fixes had the unintended
side-effect of no longer pre-loading the cached memory allowance.
Even tho we previously dropped the first packet received when
over memory limit - the consecutive ones would get thru by using
the cache. The charging was happening in batches of 128kB, so
we'd let in 128kB (truesize) worth of packets per one drop.

After the change we no longer force charge, there will be no
cache filling side effects. This causes significant drops and
connection stalls for workloads which use a lot of page cache,
since we can't reclaim page cache under GFP_NOWAIT.

Some of the latency can be recovered by improving SACK reneg
handling but nowhere near enough to get back to the pre-5.15
performance (the application I'm experimenting with still
sees 5-10x worst latency).

Apply the suggested workaround of using GFP_ATOMIC. We will now
be more permissive than previously as we'll drop _no_ packets
in softirq when under pressure. But I can't think of any good
and simple way to address that within networking.

Link: https://lore.kernel.org/all/20221012163300.795e7b86@kernel.org/
Suggested-by: Shakeel Butt <shakeelb@google.com>
Fixes: 4b1327be9fe5 ("net-memcg: pass in gfp_t mask to mem_cgroup_charge_skmem()")
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://lore.kernel.org/r/20221021160304.1362511-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: fix indefinite deferral of RTO with SACK reneging

[ Upstream commit 3d2af9cce3133b3bc596a9d065c6f9d93419ccfb ]

This commit fixes a bug that can cause a TCP data sender to repeatedly
defer RTOs when encountering SACK reneging.

The bug is that when we're in fast recovery in a scenario with SACK
reneging, every time we get an ACK we call tcp_check_sack_reneging()
and it can note the apparent SACK reneging and rearm the RTO timer for
srtt/2 into the future. In some SACK reneging scenarios that can
happen repeatedly until the receive window fills up, at which point
the sender can't send any more, the ACKs stop arriving, and the RTO
fires at srtt/2 after the last ACK. But that can take far too long
(O(10 secs)), since the connection is stuck in fast recovery with a
low cwnd that cannot grow beyond ssthresh, even if more bandwidth is
available.

This fix changes the logic in tcp_check_sack_reneging() to only rearm
the RTO timer if data is cumulatively ACKed, indicating forward
progress. This avoids this kind of nearly infinite loop of RTO timer
re-arming. In addition, this meets the goals of
tcp_check_sack_reneging() in handling Windows TCP behavior that looks
temporarily like SACK reneging but is not really.

Many thanks to Jakub Kicinski and Neil Spring, who reported this issue
and provided critical packet traces that enabled root-causing this
issue. Also, many thanks to Jakub Kicinski for testing this fix.

Fixes: 5ae344c949e7 ("tcp: reduce spurious retransmits due to transient SACK reneging")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: Neil Spring <ntspring@fb.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20221021170821.1093930-1-ncardwell.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: fix a signed-integer-overflow bug in tcp_add_backlog()

[ Upstream commit ec791d8149ff60c40ad2074af3b92a39c916a03f ]

The type of sk_rcvbuf and sk_sndbuf in struct sock is int, and
in tcp_add_backlog(), the variable limit is caculated by adding
sk_rcvbuf, sk_sndbuf and 64 * 1024, it may exceed the max value
of int and overflow. This patch reduces the limit budget by
halving the sndbuf to solve this issue since ACK packets are much
smaller than the payload.

Fixes: c9c3321257e1 ("tcp: add tcp_add_backlog()")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: minor optimization in tcp_add_backlog()

[ Upstream commit d519f350967a60b85a574ad8aeac43f2b4384746 ]

If packet is going to be coalesced, sk_sndbuf/sk_rcvbuf values
are not used. Defer their access to the point we need them.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: ec791d8149ff ("tcp: fix a signed-integer-overflow bug in tcp_add_backlog()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: lantiq_etop: don't free skb when returning NETDEV_TX_BUSY

[ Upstream commit 9c1eaa27ec599fcc25ed4970c0b73c247d147a2b ]

The ndo_start_xmit() method must not free skb when returning
NETDEV_TX_BUSY, since caller is going to requeue freed skb.

Fixes: 504d4721ee8e ("MIPS: Lantiq: Add ethernet driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed

[ Upstream commit d266935ac43d57586e311a087510fe6a084af742 ]

When the ops_init() interface is invoked to initialize the net, but
ops->init() fails, data is released. However, the ptr pointer in
net->gen is invalid. In this case, when nfqnl_nf_hook_drop() is invoked
to release the net, invalid address access occurs.

The process is as follows:
setup_net()
ops_init()
data = kzalloc(...)   ---> alloc "data"
net_assign_generic()  ---> assign "date" to ptr in net->gen
...
ops->init()           ---> failed
...
kfree(data);          ---> ptr in net->gen is invalid
...
ops_exit_list()
...
nfqnl_nf_hook_drop()
*q = nfnl_queue_pernet(net) ---> q is invalid

The following is the Call Trace information:
BUG: KASAN: use-after-free in nfqnl_nf_hook_drop+0x264/0x280
Read of size 8 at addr ffff88810396b240 by task ip/15855
Call Trace:
<TASK>
dump_stack_lvl+0x8e/0xd1
print_report+0x155/0x454
kasan_report+0xba/0x1f0
nfqnl_nf_hook_drop+0x264/0x280
nf_queue_nf_hook_drop+0x8b/0x1b0
__nf_unregister_net_hook+0x1ae/0x5a0
nf_unregister_net_hooks+0xde/0x130
ops_exit_list+0xb0/0x170
setup_net+0x7ac/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>

Allocated by task 15855:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0xa1/0xb0
__kmalloc+0x49/0xb0
ops_init+0xe7/0x410
setup_net+0x5aa/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0

Freed by task 15855:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x40
____kasan_slab_free+0x155/0x1b0
slab_free_freelist_hook+0x11b/0x220
__kmem_cache_free+0xa4/0x360
ops_init+0xb9/0x410
setup_net+0x5aa/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fixes: f875bae06533 ("net: Automatically allocate per namespace data.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kcm: annotate data-races around kcm->rx_wait

[ Upstream commit 0c745b5141a45a076f1cb9772a399f7ebcb0948a ]

kcm->rx_psock can be read locklessly in kcm_rfree().
Annotate the read and writes accordingly.

syzbot reported:

BUG: KCSAN: data-race in kcm_rcv_strparser / kcm_rfree

write to 0xffff88810784e3d0 of 1 bytes by task 1823 on cpu 1:
reserve_rx_kcm net/kcm/kcmsock.c:283 [inline]
kcm_rcv_strparser+0x250/0x3a0 net/kcm/kcmsock.c:363
__strp_recv+0x64c/0xd20 net/strparser/strparser.c:301
strp_recv+0x6d/0x80 net/strparser/strparser.c:335
tcp_read_sock+0x13e/0x5a0 net/ipv4/tcp.c:1703
strp_read_sock net/strparser/strparser.c:358 [inline]
do_strp_work net/strparser/strparser.c:406 [inline]
strp_work+0xe8/0x180 net/strparser/strparser.c:415
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306

read to 0xffff88810784e3d0 of 1 bytes by task 17869 on cpu 0:
kcm_rfree+0x121/0x220 net/kcm/kcmsock.c:181
skb_release_head_state+0x8e/0x160 net/core/skbuff.c:841
skb_release_all net/core/skbuff.c:852 [inline]
__kfree_skb net/core/skbuff.c:868 [inline]
kfree_skb_reason+0x5c/0x260 net/core/skbuff.c:891
kfree_skb include/linux/skbuff.h:1216 [inline]
kcm_recvmsg+0x226/0x2b0 net/kcm/kcmsock.c:1161
____sys_recvmsg+0x16c/0x2e0
___sys_recvmsg net/socket.c:2743 [inline]
do_recvmmsg+0x2f1/0x710 net/socket.c:2837
__sys_recvmmsg net/socket.c:2916 [inline]
__do_sys_recvmmsg net/socket.c:2939 [inline]
__se_sys_recvmmsg net/socket.c:2932 [inline]
__x64_sys_recvmmsg+0xde/0x160 net/socket.c:2932
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x01 -> 0x00

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 17869 Comm: syz-executor.2 Not tainted 6.1.0-rc1-syzkaller-00010-gbb1a1146467a-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022

Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kcm: annotate data-races around kcm->rx_psock

[ Upstream commit 15e4dabda11b0fa31d510a915d1a580f47dfc92e ]

kcm->rx_psock can be read locklessly in kcm_rfree().
Annotate the read and writes accordingly.

We do the same for kcm->rx_wait in the following patch.

syzbot reported:
BUG: KCSAN: data-race in kcm_rfree / unreserve_rx_kcm

write to 0xffff888123d827b8 of 8 bytes by task 2758 on cpu 1:
unreserve_rx_kcm+0x72/0x1f0 net/kcm/kcmsock.c:313
kcm_rcv_strparser+0x2b5/0x3a0 net/kcm/kcmsock.c:373
__strp_recv+0x64c/0xd20 net/strparser/strparser.c:301
strp_recv+0x6d/0x80 net/strparser/strparser.c:335
tcp_read_sock+0x13e/0x5a0 net/ipv4/tcp.c:1703
strp_read_sock net/strparser/strparser.c:358 [inline]
do_strp_work net/strparser/strparser.c:406 [inline]
strp_work+0xe8/0x180 net/strparser/strparser.c:415
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306

read to 0xffff888123d827b8 of 8 bytes by task 5859 on cpu 0:
kcm_rfree+0x14c/0x220 net/kcm/kcmsock.c:181
skb_release_head_state+0x8e/0x160 net/core/skbuff.c:841
skb_release_all net/core/skbuff.c:852 [inline]
__kfree_skb net/core/skbuff.c:868 [inline]
kfree_skb_reason+0x5c/0x260 net/core/skbuff.c:891
kfree_skb include/linux/skbuff.h:1216 [inline]
kcm_recvmsg+0x226/0x2b0 net/kcm/kcmsock.c:1161
____sys_recvmsg+0x16c/0x2e0
___sys_recvmsg net/socket.c:2743 [inline]
do_recvmmsg+0x2f1/0x710 net/socket.c:2837
__sys_recvmmsg net/socket.c:2916 [inline]
__do_sys_recvmmsg net/socket.c:2939 [inline]
__se_sys_recvmmsg net/socket.c:2932 [inline]
__x64_sys_recvmmsg+0xde/0x160 net/socket.c:2932
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0xffff88812971ce00 -> 0x0000000000000000

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 5859 Comm: syz-executor.3 Not tainted 6.0.0-syzkaller-12189-g19d17ab7c68b-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022

Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

atlantic: fix deadlock at aq_nic_stop

[ Upstream commit 6960d133f66ecddcd3af2b1cbd0c7dcd104268b8 ]

NIC is stopped with rtnl_lock held, and during the stop it cancels the
'service_task' work and free irqs.

However, if CONFIG_MACSEC is set, rtnl_lock is acquired both from
aq_nic_service_task and aq_linkstate_threaded_isr. Then a deadlock
happens if aq_nic_stop tries to cancel/disable them when they've already
started their execution.

As the deadlock is caused by rtnl_lock, it causes many other processes
to stall, not only atlantic related stuff.

Fix it by introducing a mutex that protects each NIC's macsec related
data, and locking it instead of the rtnl_lock from the service task and
the threaded IRQ.

Before this patch, all macsec data was protected with rtnl_lock, but
maybe not all of it needs to be protected. With this new mutex, further
efforts can be made to limit the protected data only to that which
requires it. However, probably it doesn't worth it because all macsec's
data accesses are infrequent, and almost all are done from macsec_ops
or ethtool callbacks, called holding rtnl_lock, so macsec_mutex won't
never be much contended.

The issue appeared repeteadly attaching and deattaching the NIC to a
bond interface. Doing that after this patch I cannot reproduce the bug.

Fixes: 62c1c2e606f6 ("net: atlantic: MACSec offload skeleton")
Reported-by: Li Liang <liali@redhat.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/dp: Reset frl trained flag before restarting FRL training

[ Upstream commit 63720a561b3c98199adf0c73e152807f15cc3b7f ]

For cases where DP has HDMI2.1 sink and FRL Link issues are detected,
reset the flag to state FRL trained status before restarting FRL
training.

Fixes: 9488a030ac91 ("drm/i915: Add support for enabling link status and recovery")
Cc: Swati Sharma <swati2.sharma@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com> (v2)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011063447.904649-2-ankit.k.nautiyal@intel.com
(cherry picked from commit 47e1a59e60c688c5f95b67277202f05b7e84c189)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amd-xgbe: add the bit rate quirk for Molex cables

[ Upstream commit 170a9e341a3b02c0b2ea0df16ef14a33a4f41de8 ]

The offset 12 (bit-rate) of EEPROM SFP DAC (passive) cables is expected
to be in the range 0x64 to 0x68. However, the 5 meter and 7 meter Molex
passive cables have the rate ceiling 0x78 at offset 12.

Add a quirk for Molex passive cables to extend the rate ceiling to 0x78.

Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amd-xgbe: fix the SFP compliance codes check for DAC cables

[ Upstream commit 09c5f6bf11ac98874339e55f4f5f79a9dbc9b375 ]

The current XGBE code assumes that offset 6 of EEPROM SFP DAC (passive)
cables is NULL. However, some cables (the 5 meter and 7 meter Molex
passive cables) have non-zero data at offset 6. Fix the logic by moving
the passive cable check above the active checks, so as not to be
improperly identified as an active cable. This will fix the issue for
any passive cable that advertises 1000Base-CX in offset 6.

Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/unwind/orc: Fix unreliable stack dump with gcov

[ Upstream commit 230db82413c091bc16acee72650f48d419cebe49 ]

When a console stack dump is initiated with CONFIG_GCOV_PROFILE_ALL
enabled, show_trace_log_lvl() gets out of sync with the ORC unwinder,
causing the stack trace to show all text addresses as unreliable:

  # echo l > /proc/sysrq-trigger
  [  477.521031] sysrq: Show backtrace of all active CPUs
  [  477.523813] NMI backtrace for cpu 0
  [  477.524492] CPU: 0 PID: 1021 Comm: bash Not tainted 6.0.0 #65
  [  477.525295] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014
  [  477.526439] Call Trace:
  [  477.526854]  <TASK>
  [  477.527216]  ? dump_stack_lvl+0xc7/0x114
  [  477.527801]  ? dump_stack+0x13/0x1f
  [  477.528331]  ? nmi_cpu_backtrace.cold+0xb5/0x10d
  [  477.528998]  ? lapic_can_unplug_cpu+0xa0/0xa0
  [  477.529641]  ? nmi_trigger_cpumask_backtrace+0x16a/0x1f0
  [  477.530393]  ? arch_trigger_cpumask_backtrace+0x1d/0x30
  [  477.531136]  ? sysrq_handle_showallcpus+0x1b/0x30
  [  477.531818]  ? __handle_sysrq.cold+0x4e/0x1ae
  [  477.532451]  ? write_sysrq_trigger+0x63/0x80
  [  477.533080]  ? proc_reg_write+0x92/0x110
  [  477.533663]  ? vfs_write+0x174/0x530
  [  477.534265]  ? handle_mm_fault+0x16f/0x500
  [  477.534940]  ? ksys_write+0x7b/0x170
  [  477.535543]  ? __x64_sys_write+0x1d/0x30
  [  477.536191]  ? do_syscall_64+0x6b/0x100
  [  477.536809]  ? entry_SYSCALL_64_after_hwframe+0x63/0xcd
  [  477.537609]  </TASK>

This happens when the compiled code for show_stack() has a single word
on the stack, and doesn't use a tail call to show_stack_log_lvl().
(CONFIG_GCOV_PROFILE_ALL=y is the only known case of this.)  Then the
__unwind_start() skip logic hits an off-by-one bug and fails to unwind
all the way to the intended starting frame.

Fix it by reverting the following commit:

  f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")

The original justification for that commit no longer exists.  That
original issue was later fixed in a different way, with the following
commit:

  f2ac57a4c49d ("x86/unwind/orc: Fix inactive tasks with stack pointer in %sp on GCC 10 compiled kernels")

Fixes: f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
[jpoimboe: rewrite commit log]
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfc: virtual_ncidev: Fix memory leak in virtual_nci_send()

[ Upstream commit e840d8f4a1b323973052a1af5ad4edafcde8ae3d ]

skb should be free in virtual_nci_send(), otherwise kmemleak will report
memleak.

Steps for reproduction (simulated in qemu):
cd tools/testing/selftests/nci
make
./nci_dev

BUG: memory leak
unreferenced object 0xffff888107588000 (size 208):
  comm "nci_dev", pid 206, jiffies 4294945376 (age 368.248s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000008d94c8fd>] __alloc_skb+0x1da/0x290
    [<00000000278bc7f8>] nci_send_cmd+0xa3/0x350
    [<0000000081256a22>] nci_reset_req+0x6b/0xa0
    [<000000009e721112>] __nci_request+0x90/0x250
    [<000000005d556e59>] nci_dev_up+0x217/0x5b0
    [<00000000e618ce62>] nfc_dev_up+0x114/0x220
    [<00000000981e226b>] nfc_genl_dev_up+0x94/0xe0
    [<000000009bb03517>] genl_family_rcv_msg_doit.isra.14+0x228/0x2d0
    [<00000000b7f8c101>] genl_rcv_msg+0x35c/0x640
    [<00000000c94075ff>] netlink_rcv_skb+0x11e/0x350
    [<00000000440cfb1e>] genl_rcv+0x24/0x40
    [<0000000062593b40>] netlink_unicast+0x43f/0x640
    [<000000001d0b13cc>] netlink_sendmsg+0x73a/0xbf0
    [<000000003272487f>] __sys_sendto+0x324/0x370
    [<00000000ef9f1747>] __x64_sys_sendto+0xdd/0x1b0
    [<000000001e437841>] do_syscall_64+0x3f/0x90

Fixes: e624e6c3e777 ("nfc: Add a virtual nci device driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221020030505.15572-1-shangxiaojing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: macb: Specify PHY PM management done by MAC

[ Upstream commit 15a9dbec631cd69dfbbfc4e2cbf90c9dd8432a8f ]

The `macb_resume`/`macb_suspend` methods already call the
`phylink_start`/`phylink_stop` methods during their execution so
explicitly say that the PM of the PHY is done by MAC by using the
`mac_managed_pm` flag of the `struct phylink_config`.

This also fixes the warning message issued during resume:
WARNING: CPU: 0 PID: 237 at drivers/net/phy/phy_device.c:323 mdio_bus_phy_resume+0x144/0x148

Depends-on: 96de900ae78e ("net: phylink: add mac_managed_pm in phylink_config structure")
Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221019120929.63098-1-sergiu.moga@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hinic: fix the issue of double release MBOX callback of VF

[ Upstream commit 8ec2f4c6b2e11a4249bba77460f0cfe6d95a82f8 ]

In hinic_vf_func_init(), if VF fails to register information with PF
through the MBOX, the MBOX callback function of VF is released once. But
it is released again in hinic_init_hwdev(). Remove one.

Fixes: 7dd29ee12865 ("hinic: add sriov feature support")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hinic: fix the issue of CMDQ memory leaks

[ Upstream commit 363cc87767f6ddcfb9158ad2e2afa2f8d5c4b94e ]

When hinic_set_cmdq_depth() fails in hinic_init_cmdqs(), the cmdq memory is
not released correctly. Fix it.

Fixes: 72ef908bb3ff ("hinic: add three net_device_ops of vf")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hinic: fix memory leak when reading function table

[ Upstream commit 4c1f602df8956bc0decdafd7e4fc7eef50c550b1 ]

When the input parameter idx meets the expected case option in
hinic_dbg_get_func_table(), read_data is not released. Fix it.

Fixes: 5215e16244ee ("hinic: add support to query function table")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hinic: fix incorrect assignment issue in hinic_set_interrupt_cfg()

[ Upstream commit c0605cd6750f2db9890c43a91ea4d77be8fb4908 ]

The value of lli_credit_cnt is incorrectly assigned, fix it.

Fixes: a0337c0dee68 ("hinic: add support to set and get irq coalesce")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: netsec: fix error handling in netsec_register_mdio()

[ Upstream commit 94423589689124e8cd145b38a1034be7f25835b2 ]

If phy_device_register() fails, phy_device_free() need be called to
put refcount, so memory of phy device and device name can be freed
in callback function.

If get_phy_device() fails, mdiobus_unregister() need be called,
or it will cause warning in mdiobus_free() and kobject is leaked.

Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221019064104.3228892-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: fix a null-ptr-deref in tipc_topsrv_accept

[ Upstream commit 82cb4e4612c633a9ce320e1773114875604a3cce ]

syzbot found a crash in tipc_topsrv_accept:

  KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
  Workqueue: tipc_rcv tipc_topsrv_accept
  RIP: 0010:kernel_accept+0x22d/0x350 net/socket.c:3487
  Call Trace:
   <TASK>
   tipc_topsrv_accept+0x197/0x280 net/tipc/topsrv.c:460
   process_one_work+0x991/0x1610 kernel/workqueue.c:2289
   worker_thread+0x665/0x1080 kernel/workqueue.c:2436
   kthread+0x2e4/0x3a0 kernel/kthread.c:376
   ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306

It was caused by srv->listener that might be set to null by
tipc_topsrv_stop() in net .exit whereas it's still used in
tipc_topsrv_accept() worker.

srv->listener is protected by srv->idr_lock in tipc_topsrv_stop(), so add
a check for srv->listener under srv->idr_lock in tipc_topsrv_accept() to
avoid the null-ptr-deref. To ensure the lsock is not released during the
tipc_topsrv_accept(), move sock_release() after tipc_topsrv_work_stop()
where it's waiting until the tipc_topsrv_accept worker to be done.

Note that sk_callback_lock is used to protect sk->sk_user_data instead of
srv->listener, and it should check srv in tipc_topsrv_listener_data_ready()
instead. This also ensures that no more tipc_topsrv_accept worker will be
started after tipc_conn_close() is called in tipc_topsrv_stop() where it
sets sk->sk_user_data to null.

Fixes: 0ef897be12b8 ("tipc: separate topology server listener socket from subcsriber sockets")
Reported-by: syzbot+c5ce866a8d30f4be0651@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/4eee264380c409c61c6451af1059b7fb271a7e7b.1666120790.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap()

[ Upstream commit b329f5ddc9ce4b622d9c7aaf5c6df4de52caf91a ]

clear_cpu_cap(&boot_cpu_data) is very similar to setup_clear_cpu_cap()
except that the latter also sets a bit in 'cpu_caps_cleared' which
later clears the same cap in secondary cpus, which is likely what is
meant here.

Fixes: 47125db27e47 ("perf/x86/intel/lbr: Support Architectural LBR")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lkml.kernel.org/r/20220718141123.136106-2-mlevitsk@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: ac97: fix possible memory leak in snd_ac97_dev_register()

[ Upstream commit 4881bda5ea05c8c240fc8afeaa928e2bc43f61fa ]

If device_register() fails in snd_ac97_dev_register(), it should
call put_device() to give up reference, or the name allocated in
dev_set_name() is leaked.

Fixes: 0ca06a00e206 ("[ALSA] AC97 bus interface for ad-hoc drivers")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221019093025.1179475-1-yangyingliang@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: lpass-cpu: Mark HDMI TX parity register as volatile

[ Upstream commit 1dd5166102e7ca91e8c5d833110333835e147ddb ]

Update LPASS_HDMI_TX_PARITY_ADDR register as volatile, to fix
dp audio failures observed with some of external monitors.

Fixes: 7cb37b7bd0d3 ("ASoC: qcom: Add support for lpass hdmi driver")

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1665825530-7593-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: intel: Add missing of_node_put() in ebu_nand_probe()

[ Upstream commit 1f3b494d1fc18ebb37aaa47107e9b84bf5b54ff7 ]

The 'chip_np' returned by of_get_next_child() with refcount decremented,
of_node_put() need be called in error path to decrease the refcount.

Fixes: bfc618fcc3f1 ("mtd: rawnand: intel: Read the chip-select line from the correct OF node")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220924131010.957117-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arc: iounmap() arg is volatile

[ Upstream commit c44f15c1c09481d50fd33478ebb5b8284f8f5edb ]

Add 'volatile' to iounmap()'s argument to prevent build warnings.
This make it the same as other major architectures.

Placates these warnings: (12 such warnings)

../drivers/video/fbdev/riva/fbdev.c: In function 'rivafb_probe':
../drivers/video/fbdev/riva/fbdev.c:2067:42: error: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type [-Werror=discarded-qualifiers]
 2067 |                 iounmap(default_par->riva.PRAMIN);

Fixes: 1162b0701b14b ("ARC: I/O and DMA Mappings")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: linux-snps-arc@lists.infradead.org
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/core: Fix comparison in sched_group_cookie_match()

[ Upstream commit e705968dd687574b6ca3ebe772683d5642759132 ]

In commit 97886d9dcd86 ("sched: Migration changes for core scheduling"),
sched_group_cookie_match() was added to help determine if a cookie
matches the core state.

However, while it iterates the SMT group, it fails to actually use the
RQ for each of the CPUs iterated, use cpu_rq(cpu) instead of rq to fix
things.

Fixes: 97886d9dcd86 ("sched: Migration changes for core scheduling")
Signed-off-by: Lin Shengwang <linshengwang1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221008022709.642-1-linshengwang1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf: Fix missing SIGTRAPs

[ Upstream commit ca6c21327c6af02b7eec31ce4b9a740a18c6c13f ]

Marco reported:

Due to the implementation of how SIGTRAP are delivered if
perf_event_attr::sigtrap is set, we've noticed 3 issues:

  1. Missing SIGTRAP due to a race with event_sched_out() (more
     details below).

  2. Hardware PMU events being disabled due to returning 1 from
     perf_event_overflow(). The only way to re-enable the event is
     for user space to first "properly" disable the event and then
     re-enable it.

  3. The inability to automatically disable an event after a
     specified number of overflows via PERF_EVENT_IOC_REFRESH.

The worst of the 3 issues is problem (1), which occurs when a
pending_disable is "consumed" by a racing event_sched_out(), observed
as follows:

CPU0 | CPU1
--------------------------------+---------------------------
__perf_event_overflow() |
 perf_event_disable_inatomic() |
  pending_disable = CPU0 | ...
| _perf_event_enable()
|  event_function_call()
|   task_function_call()
|    /* sends IPI to CPU0 */
<IPI> | ...
 __perf_event_enable() +---------------------------
  ctx_resched()
   task_ctx_sched_out()
    ctx_sched_out()
     group_sched_out()
      event_sched_out()
       pending_disable = -1
</IPI>
<IRQ-work>
 perf_pending_event()
  perf_pending_event_disable()
   /* Fails to send SIGTRAP because no pending_disable! */
</IRQ-work>

In the above case, not only is that particular SIGTRAP missed, but also
all future SIGTRAPs because 'event_limit' is not reset back to 1.

To fix, rework pending delivery of SIGTRAP via IRQ-work by introduction
of a separate 'pending_sigtrap', no longer using 'event_limit' and
'pending_disable' for its delivery.

Additionally; and different to Marco's proposed patch:

 - recognise that pending_disable effectively duplicates oncpu for
   the case where it is set. As such, change the irq_work handler to
   use ->oncpu to target the event and use pending_* as boolean toggles.

 - observe that SIGTRAP targets the ctx->task, so the context switch
   optimization that carries contexts between tasks is invalid. If
   the irq_work were delayed enough to hit after a context switch the
   SIGTRAP would be delivered to the wrong task.

 - observe that if the event gets scheduled out
   (rotation/migration/context-switch/...) the irq-work would be
   insufficient to deliver the SIGTRAP when the event gets scheduled
   back in (the irq-work might still be pending on the old CPU).

   Therefore have event_sched_out() convert the pending sigtrap into a
   task_work which will deliver the signal at return_to_user.

Fixes: 97ba62b27867 ("perf: Add support for SIGTRAP on perf events")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Debugged-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Marco Elver <elver@google.com>
Debugged-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Marco Elver <elver@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: lpass-cpu: mark HDMI TX registers as volatile

[ Upstream commit c9a3545b1d771fb7b06a487796c40288c02c41c5 ]

Update HDMI volatile registers list as DMA, Channel Selection registers,
vbit control registers are being reflected by hardware DP port
disconnection.

This update is required to fix no display and no sound issue observed
after reconnecting TAMA/SANWA DP cables.
Once DP cable is unplugged, DMA control registers are being reset by
hardware, however at second plugin, new dma control values does not
updated to the dma hardware registers since new register value and
cached values at the time of first plugin are same.

Fixes: 7cb37b7bd0d3 ("ASoC: qcom: Add support for lpass hdmi driver")

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reported-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Link: https://lore.kernel.org/r/1665637711-13300-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test

[ Upstream commit 05c2224d4b049406b0545a10be05280ff4b8ba0a ]

It's required by vm_userspace_mem_region_add() that memory size
should be aligned to host page size. However, one guest page is
provided by memslot_modification_stress_test. It triggers failure
in the scenario of 64KB-page-size-host and 4KB-page-size-guest,
as the following messages indicate.

 # ./memslot_modification_stress_test
 Testing guest mode: PA-bits:40,  VA-bits:48,  4K pages
 guest physical test memory: [0xffbfff0000, 0xffffff0000)
 Finished creating vCPUs
 Started all vCPUs
 ==== Test Assertion Failure ====
   lib/kvm_util.c:824: vm_adjust_num_guest_pages(vm->mode, npages) == npages
   pid=5712 tid=5712 errno=0 - Success
      1 0x0000000000404eeb: vm_userspace_mem_region_add at kvm_util.c:822
      2 0x0000000000401a5b: add_remove_memslot at memslot_modification_stress_test.c:82
      3  (inlined by) run_test at memslot_modification_stress_test.c:110
      4 0x0000000000402417: for_each_guest_mode at guest_modes.c:100
      5 0x00000000004016a7: main at memslot_modification_stress_test.c:187
      6 0x0000ffffb8cd4383: ?? ??:0
      7 0x0000000000401827: _start at :?
   Number of guest pages is not compatible with the host. Try npages=16

Fix the issue by providing 16 guest pages to the memory slot for this
particular combination of 64KB-page-size-host and 4KB-page-size-guest
on aarch64.

Fixes: ef4c9f4f65462 ("KVM: selftests: Fix 32-bit truncation of vm_get_max_gfn()")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221013063020.201856-1-gshan@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Fix return type of mdp4_lvds_connector_mode_valid

[ Upstream commit 0b33a33bd15d5bab73b87152b220a8d0153a4587 ]

The mode_valid field in drm_connector_helper_funcs is expected to be of
type:
enum drm_mode_status (* mode_valid) (struct drm_connector *connector,
                                     struct drm_display_mode *mode);

The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.

The return type of mdp4_lvds_connector_mode_valid should be changed from
int to enum drm_mode_status.

Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Fixes: 3e87599b68e7 ("drm/msm/mdp4: add LVDS panel support")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/502878/
Link: https://lore.kernel.org/r/20220913205551.155128-1-nhuck@google.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: atomisp: prevent integer overflow in sh_css_set_black_frame()

[ Upstream commit 3ad290194bb06979367622e47357462836c1d3b4 ]

The "height" and "width" values come from the user so the "height * width"
multiplication can overflow.

Link: https://lore.kernel.org/r/YxBBCRnm3mmvaiuR@kili
Fixes: a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: v4l2: Fix v4l2_i2c_subdev_set_name function documentation

[ Upstream commit bb9ea2c31fa11b789ade4c3abcdda3c5370a76ab ]

The doc says the I²C device's name is used if devname is NULL, but
actually the I²C device driver's name is used.

Fixes: 0658293012af ("media: v4l: subdev: Add a function to set an I²C sub-device's name")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ieee802154: fix error return code in dgram_bind()

commit 444d8ad4916edec8a9fc684e841287db9b1e999f upstream.

Fix to return error code -EINVAL from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 94160108a70c ("net/ieee802154: fix uninit value bug in dgram_sendmsg")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220919160830.1436109-1-weiyongjun@huaweicloud.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ethtool: eeprom: fix null-deref on genl_info in dump

commit 9d9effca9d7d7cf6341182a7c5cabcbd6fa28063 upstream.

The similar fix as commit 46cdedf2a0fa ("ethtool: pse-pd: fix null-deref on
genl_info in dump") is also needed for ethtool eeprom.

Fixes: c781ff12a2f3 ("ethtool: Allow network drivers to dump arbitrary EEPROM data")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/5575919a2efc74cd9ad64021880afc3805c54166.1666362167.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: block: Remove error check of hw_reset on reset

commit 406e14808ee695cbae1eafa5fd3ac563c29470ab upstream.

Before switching back to the right partition in mmc_blk_reset there used
to be a check if hw_reset was even supported. This return value
was removed, so there is no reason to check. Furthermore ensure
part_curr is not falsely set to a valid value on reset or
partition switch error.

As part of this change the code paths of mmc_blk_reset calls were checked
to ensure no commands are issued after a failed mmc_blk_reset directly
without going through the block layer.

Fixes: fefdd3c91e0a ("mmc: core: Drop superfluous validations in mmc_hw|sw_reset()")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/e91be6199d04414a91e20611c81bfe1d@hyperstone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "scsi: lpfc: SLI path split: Refactor lpfc_iocbq"

This reverts commit 1c5e670d6a5a8e7e99b51f45e79879f7828bd2ec.

LTS 5.15 pulled in several lpfc "SLI Path split" patches.  The Path
Split mods were a 14-patch set, which refactors the driver from
to split the sli-3 hw (now eol) from the sli-4 hw and use sli4
structures natively. The patches are highly inter-related.

Given only some of the patches were included, it created a situation
where FLOGI's fail, thus SLI Ports can't start communication.

Reverting this patch as its one of the partial Path Split patches
that was included.

Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4"

This reverts commit c56cc7fefc3159049f94fb1318e48aa60cabf703.

LTS 5.15 pulled in several lpfc "SLI Path split" patches.  The Path
Split mods were a 14-patch set, which refactors the driver from
to split the sli-3 hw (now eol) from the sli-4 hw and use sli4
structures natively. The patches are highly inter-related.

Given only some of the patches were included, it created a situation
where FLOGI's fail, thus SLI Ports can't start communication.

Reverting this patch as its one of the partial Path Split patches
that was included.

Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "scsi: lpfc: SLI path split: Refactor SCSI paths"

This reverts commit b4543dbea84c8b64566dd0d626d63f8cbe977f61.

LTS 5.15 pulled in several lpfc "SLI Path split" patches.  The Path
Split mods were a 14-patch set, which refactors the driver from
to split the sli-3 hw (now eol) from the sli-4 hw and use sli4
structures natively. The patches are highly inter-related.

Given only some of the patches were included, it created a situation
where FLOGI's fail, thus SLI Ports can't start communication.

Reverting this patch as its one of the partial Path Split patches
that was included.

NOTE: fixed a git revert error which caused a new line to be inserted:
  line 5755 of lpfc_scsi.c in lpfc_queuecommand
      +      atomic_inc(&ndlp->cmd_pending);
  Removed the line

Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "scsi: lpfc: Fix locking for lpfc_sli_iocbq_lookup()"

This reverts commit 9a570069cdbbc28c4b5b4632d5c9369371ec739c.

LTS 5.15 pulled in several lpfc "SLI Path split" patches.  The Path
Split mods were a 14-patch set, which refactors the driver from
to split the sli-3 hw (now eol) from the sli-4 hw and use sli4
structures natively. The patches are highly inter-related.

Given only some of the patches were included, it created a situation
where FLOGI's fail, thus SLI Ports can't start communication.

Reverting this patch as its a fix specific to the Path Split patches,
which were partially included and now being pulled from 5.15.

Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "scsi: lpfc: Fix element offset in __lpfc_sli_release_iocbq_s4()"

This reverts commit 6e99860de6f4e286c386f533c4d35e7e283803d4.

LTS 5.15 pulled in several lpfc "SLI Path split" patches.  The Path
Split mods were a 14-patch set, which refactors the driver from
to split the sli-3 hw (now eol) from the sli-4 hw and use sli4
structures natively. The patches are highly inter-related.

Given only some of the patches were included, it created a situation
where FLOGI's fail, thus SLI Ports can't start communication.

Reverting this patch as its a fix specific to the Path Split patches,
which were partially included and now being pulled from 5.15.

Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "scsi: lpfc: Resolve some cleanup issues following SLI path refactoring"

This reverts commit 17bf429b913b9e7f8d2353782e24ed3a491bb2d8.

LTS 5.15 pulled in several lpfc "SLI Path split" patches.  The Path
Split mods were a 14-patch set, which refactors the driver from
to split the sli-3 hw (now eol) from the sli-4 hw and use sli4
structures natively. The patches are highly inter-related.

Given only some of the patches were included, it created a situation
where FLOGI's fail, thus SLI Ports can't start communication.

Reverting this patch as its a fix specific to the Path Split patches,
which were partially included and now being pulled from 5.15.

Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/pci: add missing EX_TABLE entries to __pcistg_mio_inuser()/__pcilg_mio_inuser()

commit 6ec803025cf3173a57222e4411097166bd06fa98 upstream.

For some exception types the instruction address points behind the
instruction that caused the exception. Take that into account and add
the missing exception table entry.

Cc: <stable@vger.kernel.org>
Fixes: f058599e22d5 ("s390/pci: Fix s390_mmio_read/write with MIO")
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/futex: add missing EX_TABLE entry to __futex_atomic_op()

commit a262d3ad6a433e4080cecd0a8841104a5906355e upstream.

For some exception types the instruction address points behind the
instruction that caused the exception. Take that into account and add
the missing exception table entry.

Cc: <stable@vger.kernel.org>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf auxtrace: Fix address filter symbol name match for modules

commit cba04f3136b658583adb191556f99d087589c1cc upstream.

For modules, names from kallsyms__parse() contain the module name which
meant that module symbols did not match exactly by name.

Fix by matching the name string up to the separating tab character.

Fixes: 1b36c03e356936d6 ("perf record: Add support for using symbols in address filters")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221026072736.2982-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: mm: fix leakage of memory allocated for PTE

commit 4fd9df10cb7a9289fbd22d669f9f98164d95a1ce upstream.

Since commit d9820ff ("ARC: mm: switch pgtable_t back to struct page *")
a memory leakage problem occurs. Memory allocated for page table entries
not released during process termination. This issue can be reproduced by
a small program that allocates a large amount of memory. After several
runs, you'll see that the amount of free memory has reduced and will
continue to reduce after each run. All ARC CPUs are effected by this
issue. The issue was introduced since the kernel stable release v5.15-rc1.

As described in commit d9820ff after switch pgtable_t back to struct
page *, a pointer to "struct page" and appropriate functions are used to
allocate and free a memory page for PTEs, but the pmd_pgtable macro hasn't
changed and returns the direct virtual address from the PMD (PGD) entry.
Than this address used as a parameter in the __pte_free() and as a result
this function couldn't release memory page allocated for PTEs.

Fix this issue by changing the pmd_pgtable macro and returning pointer to
struct page.

Fixes: d9820ff76f95 ("ARC: mm: switch pgtable_t back to struct page *")
Cc: Mike Rapoport <rppt@kernel.org>
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Pavel Kozlov <pavel.kozlov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: Ingenic: JZ4755 bug fixes

commit 17747577bbcb496e1b1c4096d64c2fc1e7bc0fef upstream.

Fixes UART1 function bits and MMC groups typo.

For pins 0x97,0x99 function 0 is designated to PWM3/PWM5
respectively, function is 1 designated to the UART1.

Diff from v1:
 - sent separately
 - added tag Fixes

Cc: stable@vger.kernel.org
Fixes: b582b5a434d3 ("pinctrl: Ingenic: Add pinctrl driver for JZ4755.")
Tested-by: Siarhei Volkau <lis8215@gmail.com>
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016153548.3024209-1-lis8215@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: fix use-after-free in __kernfs_remove

commit 4abc99652812a2ddf932f137515d5c5a04723538 upstream.

Syzkaller managed to trigger concurrent calls to
kernfs_remove_by_name_ns() for the same file resulting in
a KASAN detected use-after-free. The race occurs when the root
node is freed during kernfs_drain().

To prevent this acquire an additional reference for the root
of the tree that is removed before calling __kernfs_remove().

Found by syzkaller with the following reproducer (slab_nomerge is
required):

syz_mount_image$ext4(0x0, &(0x7f0000000100)='./file0\x00', 0x100000, 0x0, 0x0, 0x0, 0x0)
r0 = openat(0xffffffffffffff9c, &(0x7f0000000080)='/proc/self/exe\x00', 0x0, 0x0)
close(r0)
pipe2(&(0x7f0000000140)={0xffffffffffffffff, <r1=>0xffffffffffffffff}, 0x800)
mount$9p_fd(0x0, &(0x7f0000000040)='./file0\x00', &(0x7f00000000c0), 0x408, &(0x7f0000000280)={'trans=fd,', {'rfdno', 0x3d, r0}, 0x2c, {'wfdno', 0x3d, r1}, 0x2c, {[{@cache_loose}, {@mmap}, {@loose}, {@loose}, {@mmap}], [{@mask={'mask', 0x3d, '^MAY_EXEC'}}, {@fsmagic={'fsmagic', 0x3d, 0x10001}}, {@dont_hash}]}})

Sample report:

==================================================================
BUG: KASAN: use-after-free in kernfs_type include/linux/kernfs.h:335 [inline]
BUG: KASAN: use-after-free in kernfs_leftmost_descendant fs/kernfs/dir.c:1261 [inline]
BUG: KASAN: use-after-free in __kernfs_remove.part.0+0x843/0x960 fs/kernfs/dir.c:1369
Read of size 2 at addr ffff8880088807f0 by task syz-executor.2/857

CPU: 0 PID: 857 Comm: syz-executor.2 Not tainted 6.0.0-rc3-00363-g7726d4c3e60b #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x6e/0x91 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:317 [inline]
 print_report.cold+0x5e/0x5e5 mm/kasan/report.c:433
 kasan_report+0xa3/0x130 mm/kasan/report.c:495
 kernfs_type include/linux/kernfs.h:335 [inline]
 kernfs_leftmost_descendant fs/kernfs/dir.c:1261 [inline]
 __kernfs_remove.part.0+0x843/0x960 fs/kernfs/dir.c:1369
 __kernfs_remove fs/kernfs/dir.c:1356 [inline]
 kernfs_remove_by_name_ns+0x108/0x190 fs/kernfs/dir.c:1589
 sysfs_slab_add+0x133/0x1e0 mm/slub.c:5943
 __kmem_cache_create+0x3e0/0x550 mm/slub.c:4899
 create_cache mm/slab_common.c:229 [inline]
 kmem_cache_create_usercopy+0x167/0x2a0 mm/slab_common.c:335
 p9_client_create+0xd4d/0x1190 net/9p/client.c:993
 v9fs_session_init+0x1e6/0x13c0 fs/9p/v9fs.c:408
 v9fs_mount+0xb9/0xbd0 fs/9p/vfs_super.c:126
 legacy_get_tree+0xf1/0x200 fs/fs_context.c:610
 vfs_get_tree+0x85/0x2e0 fs/super.c:1530
 do_new_mount fs/namespace.c:3040 [inline]
 path_mount+0x675/0x1d00 fs/namespace.c:3370
 do_mount fs/namespace.c:3383 [inline]
 __do_sys_mount fs/namespace.c:3591 [inline]
 __se_sys_mount fs/namespace.c:3568 [inline]
 __x64_sys_mount+0x282/0x300 fs/namespace.c:3568
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f725f983aed
Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f725f0f7028 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00007f725faa3f80 RCX: 00007f725f983aed
RDX: 00000000200000c0 RSI: 0000000020000040 RDI: 0000000000000000
RBP: 00007f725f9f419c R08: 0000000020000280 R09: 0000000000000000
R10: 0000000000000408 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000006 R14: 00007f725faa3f80 R15: 00007f725f0d7000
 </TASK>

Allocated by task 855:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 kasan_set_track mm/kasan/common.c:45 [inline]
 set_alloc_info mm/kasan/common.c:437 [inline]
 __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:470
 kasan_slab_alloc include/linux/kasan.h:224 [inline]
 slab_post_alloc_hook mm/slab.h:727 [inline]
 slab_alloc_node mm/slub.c:3243 [inline]
 slab_alloc mm/slub.c:3251 [inline]
 __kmem_cache_alloc_lru mm/slub.c:3258 [inline]
 kmem_cache_alloc+0xbf/0x200 mm/slub.c:3268
 kmem_cache_zalloc include/linux/slab.h:723 [inline]
 __kernfs_new_node+0xd4/0x680 fs/kernfs/dir.c:593
 kernfs_new_node fs/kernfs/dir.c:655 [inline]
 kernfs_create_dir_ns+0x9c/0x220 fs/kernfs/dir.c:1010
 sysfs_create_dir_ns+0x127/0x290 fs/sysfs/dir.c:59
 create_dir lib/kobject.c:63 [inline]
 kobject_add_internal+0x24a/0x8d0 lib/kobject.c:223
 kobject_add_varg lib/kobject.c:358 [inline]
 kobject_init_and_add+0x101/0x160 lib/kobject.c:441
 sysfs_slab_add+0x156/0x1e0 mm/slub.c:5954
 __kmem_cache_create+0x3e0/0x550 mm/slub.c:4899
 create_cache mm/slab_common.c:229 [inline]
 kmem_cache_create_usercopy+0x167/0x2a0 mm/slab_common.c:335
 p9_client_create+0xd4d/0x1190 net/9p/client.c:993
 v9fs_session_init+0x1e6/0x13c0 fs/9p/v9fs.c:408
 v9fs_mount+0xb9/0xbd0 fs/9p/vfs_super.c:126
 legacy_get_tree+0xf1/0x200 fs/fs_context.c:610
 vfs_get_tree+0x85/0x2e0 fs/super.c:1530
 do_new_mount fs/namespace.c:3040 [inline]
 path_mount+0x675/0x1d00 fs/namespace.c:3370
 do_mount fs/namespace.c:3383 [inline]
 __do_sys_mount fs/namespace.c:3591 [inline]
 __se_sys_mount fs/namespace.c:3568 [inline]
 __x64_sys_mount+0x282/0x300 fs/namespace.c:3568
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Freed by task 857:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 kasan_set_track+0x21/0x30 mm/kasan/common.c:45
 kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:370
 ____kasan_slab_free mm/kasan/common.c:367 [inline]
 ____kasan_slab_free mm/kasan/common.c:329 [inline]
 __kasan_slab_free+0x108/0x190 mm/kasan/common.c:375
 kasan_slab_free include/linux/kasan.h:200 [inline]
 slab_free_hook mm/slub.c:1754 [inline]
 slab_free_freelist_hook mm/slub.c:1780 [inline]
 slab_free mm/slub.c:3534 [inline]
 kmem_cache_free+0x9c/0x340 mm/slub.c:3551
 kernfs_put.part.0+0x2b2/0x520 fs/kernfs/dir.c:547
 kernfs_put+0x42/0x50 fs/kernfs/dir.c:521
 __kernfs_remove.part.0+0x72d/0x960 fs/kernfs/dir.c:1407
 __kernfs_remove fs/kernfs/dir.c:1356 [inline]
 kernfs_remove_by_name_ns+0x108/0x190 fs/kernfs/dir.c:1589
 sysfs_slab_add+0x133/0x1e0 mm/slub.c:5943
 __kmem_cache_create+0x3e0/0x550 mm/slub.c:4899
 create_cache mm/slab_common.c:229 [inline]
 kmem_cache_create_usercopy+0x167/0x2a0 mm/slab_common.c:335
 p9_client_create+0xd4d/0x1190 net/9p/client.c:993
 v9fs_session_init+0x1e6/0x13c0 fs/9p/v9fs.c:408
 v9fs_mount+0xb9/0xbd0 fs/9p/vfs_super.c:126
 legacy_get_tree+0xf1/0x200 fs/fs_context.c:610
 vfs_get_tree+0x85/0x2e0 fs/super.c:1530
 do_new_mount fs/namespace.c:3040 [inline]
 path_mount+0x675/0x1d00 fs/namespace.c:3370
 do_mount fs/namespace.c:3383 [inline]
 __do_sys_mount fs/namespace.c:3591 [inline]
 __se_sys_mount fs/namespace.c:3568 [inline]
 __x64_sys_mount+0x282/0x300 fs/namespace.c:3568
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

The buggy address belongs to the object at ffff888008880780
 which belongs to the cache kernfs_node_cache of size 128
The buggy address is located 112 bytes inside of
 128-byte region [ffff888008880780, ffff888008880800)

The buggy address belongs to the physical page:
page:00000000732833f8 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8880
flags: 0x100000000000200(slab|node=0|zone=1)
raw: 0100000000000200 0000000000000000 dead000000000122 ffff888001147280
raw: 0000000000000000 0000000000150015 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888008880680: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
 ffff888008880700: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff888008880780: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                             ^
 ffff888008880800: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
 ffff888008880880: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
==================================================================

Acked-by: Tejun Heo <tj@kernel.org>
Cc: stable <stable@kernel.org> # -rc3
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Link: https://lore.kernel.org/r/20220913121723.691454-1-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

counter: microchip-tcb-capture: Handle Signal1 read and Synapse

commit d917a62af81b133f35f627e7936e193c842a7947 upstream.

The signal_read(), action_read(), and action_write() callbacks have been
assuming Signal0 is requested without checking. This results in requests
for Signal1 returning data for Signal0. This patch fixes these
oversights by properly checking for the Signal's id in the respective
callbacks and handling accordingly based on the particular Signal
requested. The trig_inverted member of the mchp_tc_data is removed as
superfluous.

Fixes: 106b104137fd ("counter: Add microchip TCB capture counter")
Cc: stable@vger.kernel.org
Reviewed-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Link: https://lore.kernel.org/r/20221018121014.7368-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-esdhc-imx: Propagate ESDHC_FLAG_HS400* only on 8bit bus

commit 1ed5c3b22fc78735c539e4767832aea58db6761c upstream.

The core issues the warning "drop HS400 support since no 8-bit bus" when
one of the ESDHC_FLAG_HS400* flags is set on a non 8bit capable host. To
avoid this warning set these flags only on hosts that actually can do
8bit, i.e. have bus-width = <8> set in the device tree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Fixes: 029e2476f9e6 ("mmc: sdhci-esdhc-imx: add HS400_ES support for i.MX8QXP")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221013093248.2220802-1-s.hauer@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-pci-core: Disable ES for ASUS BIOS on Jasper Lake

commit 9dc0033e4658d6f9d9952c3c0c6be3ec25bc2985 upstream.

Enhanced Strobe (ES) does not work correctly on the ASUS 1100 series of
devices. Jasper Lake eMMCs (pci_id 8086:4dc4) are supposed to support
ES. There are also two system families under the series, thus this is
being scoped to the ASUS BIOS.

The failing ES prevents the installer from writing to disk. Falling back
to HS400 without ES fixes the issue.

Signed-off-by: Patrick Thompson <ptf@google.com>
Fixes: 315e3bd7ac19 ("mmc: sdhci-pci: Add support for Intel JSL")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221013210017.3751025-1-ptf@google.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Fix kernel panic when remove non-standard SDIO card

commit 9972e6b404884adae9eec7463e30d9b3c9a70b18 upstream.

SDIO tuple is only allocated for standard SDIO card, especially it causes
memory corruption issues when the non-standard SDIO card has removed, which
is because the card device's reference counter does not increase for it at
sdio_init_func(), but all SDIO card device reference counter gets decreased
at sdio_release_func().

Fixes: 6f51be3d37df ("sdio: allow non-standard SDIO cards")
Signed-off-by: Matthew Ma <mahongwei@zeku.com>
Reviewed-by: Weizhao Ouyang <ouyangweizhao@zeku.com>
Reviewed-by: John Wang <wangdayu@zeku.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221014034951.2300386-1-ouyangweizhao@zeku.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci_am654: 'select', not 'depends' REGMAP_MMIO

commit 8d280b1df87e0b3d1355aeac7e62b62214b93f1c upstream.

REGMAP_MMIO is not user-configurable, so we can only satisfy this
dependency by enabling some other Kconfig symbol that properly 'select's
it. Use select like everybody else.

Noticed when trying to enable this driver for compile testing.

Fixes: 59592cc1f593 ("mmc: sdhci_am654: Add dependency on MMC_SDHCI_AM654")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221024180300.2292208-1-briannorris@chromium.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: cti: Fix hang in cti_disable_hw()

commit 6746eae4bbaddcc16b40efb33dab79210828b3ce upstream.

cti_enable_hw() and cti_disable_hw() are called from an atomic context
so shouldn't use runtime PM because it can result in a sleep when
communicating with firmware.

Since commit 3c6656337852 ("Revert "firmware: arm_scmi: Add clock
management to the SCMI power domain""), this causes a hang on Juno when
running the Perf Coresight tests or running this command:

  perf record -e cs_etm//u -- ls

This was also missed until the revert commit because pm_runtime_put()
was called with the wrong device until commit 692c9a499b28 ("coresight:
cti: Correct the parameter for pm_runtime_put")

With lock and scheduler debugging enabled the following is output:

   coresight cti_sys0: cti_enable_hw -- dev:cti_sys0  parent: 20020000.cti
   BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1151
   in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 330, name: perf-exec
   preempt_count: 2, expected: 0
   RCU nest depth: 0, expected: 0
   INFO: lockdep is turned off.
   irq event stamp: 0
   hardirqs last  enabled at (0): [<0000000000000000>] 0x0
   hardirqs last disabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948
   softirqs last  enabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948
   softirqs last disabled at (0): [<0000000000000000>] 0x0
   CPU: 3 PID: 330 Comm: perf-exec Not tainted 6.0.0-00053-g042116d99298 #7
   Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Sep 13 2022
   Call trace:
    dump_backtrace+0x134/0x140
    show_stack+0x20/0x58
    dump_stack_lvl+0x8c/0xb8
    dump_stack+0x18/0x34
    __might_resched+0x180/0x228
    __might_sleep+0x50/0x88
    __pm_runtime_resume+0xac/0xb0
    cti_enable+0x44/0x120
    coresight_control_assoc_ectdev+0xc0/0x150
    coresight_enable_path+0xb4/0x288
    etm_event_start+0x138/0x170
    etm_event_add+0x48/0x70
    event_sched_in.isra.122+0xb4/0x280
    merge_sched_in+0x1fc/0x3d0
    visit_groups_merge.constprop.137+0x16c/0x4b0
    ctx_sched_in+0x114/0x1f0
    perf_event_sched_in+0x60/0x90
    ctx_resched+0x68/0xb0
    perf_event_exec+0x138/0x508
    begin_new_exec+0x52c/0xd40
    load_elf_binary+0x6b8/0x17d0
    bprm_execve+0x360/0x7f8
    do_execveat_common.isra.47+0x218/0x238
    __arm64_sys_execve+0x48/0x60
    invoke_syscall+0x4c/0x110
    el0_svc_common.constprop.4+0xfc/0x120
    do_el0_svc+0x34/0xc0
    el0_svc+0x40/0x98
    el0t_64_sync_handler+0x98/0xc0
    el0t_64_sync+0x170/0x174

Fix the issue by removing the runtime PM calls completely. They are not
needed here because it must have already been done when building the
path for a trace.

Fixes: 835d722ba10a ("coresight: cti: Initial CoreSight CTI Driver")
Cc: stable <stable@kernel.org>
Reported-by: Aishwarya TCV <Aishwarya.TCV@arm.com>
Reported-by: Cristian Marussi <Cristian.Marussi@arm.com>
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
[ Fix build warnings ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221025131032.1149459-1-suzuki.poulose@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm/dp: fix IRQ lifetime

commit a79343dcaba4b11adb57350e0b6426906a9b658e upstream.

Device-managed resources allocated post component bind must be tied to
the lifetime of the aggregate DRM device or they will not necessarily be
released when binding of the aggregate device is deferred.

This is specifically true for the DP IRQ, which will otherwise remain
requested so that the next bind attempt fails when requesting the IRQ a
second time.

Since commit c3bf8e21b38a ("drm/msm/dp: Add eDP support via aux_bus")
this can happen when the aux-bus panel driver has not yet been loaded so
that probe is deferred.

Fix this by tying the device-managed lifetime of the DP IRQ to the DRM
device so that it is released when bind fails.

Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Cc: stable@vger.kernel.org # 5.10
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/502679/
Link: https://lore.kernel.org/r/20220913085320.8577-6-johan+linaro@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm/hdmi: fix memory corruption with too many bridges

commit 4c1294da6aed1f16d47a417dcfe6602833c3c95c upstream.

Add the missing sanity check on the bridge counter to avoid corrupting
data beyond the fixed-sized bridge array in case there are ever more
than eight bridges.

Fixes: a3376e3ec81c ("drm/msm: convert to drm_bridge")
Cc: stable@vger.kernel.org # 3.12
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/502670/
Link: https://lore.kernel.org/r/20220913085320.8577-5-johan+linaro@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm/dsi: fix memory corruption with too many bridges

commit 2e786eb2f9cebb07e317226b60054df510b60c65 upstream.

Add the missing sanity check on the bridge counter to avoid corrupting
data beyond the fixed-sized bridge array in case there are ever more
than eight bridges.

Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support")
Cc: stable@vger.kernel.org # 4.1
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/502668/
Link: https://lore.kernel.org/r/20220913085320.8577-4-johan+linaro@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: disallow gfxoff until GC IP blocks complete s2idle resume

commit d61e1d1d5225a9baeb995bcbdb904f66f70ed87e upstream.

In the S2idle suspend/resume phase the gfxoff is keeping functional so
some IP blocks will be likely to reinitialize at gfxoff entry and that
will result in failing to program GC registers.Therefore, let disallow
gfxoff until AMDGPU IPs reinitialized completely.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.15.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Use transport-defined speed mask for supported_speeds

commit 0b863257c17c5f57a41e0a48de140ed026957a63 upstream.

One of the sysfs values reported for supported_speeds was not valid (20Gb/s
reported instead of 64Gb/s).  Instead of driver internal speed mask
definition, use speed mask defined in transport_fc for reporting
host->supported_speeds.

Link: https://lore.kernel.org/r/20220927115946.17559-1-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac802154: Fix LQI recording

commit 5a5c4e06fd03b595542d5590f2bc05a6b7fc5c2b upstream.

Back in 2014, the LQI was saved in the skb control buffer (skb->cb, or
mac_cb(skb)) without any actual reset of this area prior to its use.

As part of a useful rework of the use of this region, 32edc40ae65c
("ieee802154: change _cb handling slightly") introduced mac_cb_init() to
basically memset the cb field to 0. In particular, this new function got
called at the beginning of mac802154_parse_frame_start(), right before
the location where the buffer got actually filled.

What went through unnoticed however, is the fact that the very first
helper called by device drivers in the receive path already used this
area to save the LQI value for later extraction. Resetting the cb field
"so late" led to systematically zeroing the LQI.

If we consider the reset of the cb field needed, we can make it as soon
as we get an skb from a device driver, right before storing the LQI,
as is the very first time we need to write something there.

Cc: stable@vger.kernel.org
Fixes: 32edc40ae65c ("ieee802154: change _cb handling slightly")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221020142535.1038885-1-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exec: Copy oldsighand->action under spin-lock

commit 5bf2fedca8f59379025b0d52f917b9ddb9bfe17e upstream.

unshare_sighand should only access oldsighand->action
while holding oldsighand->siglock, to make sure that
newsighand->action is in a consistent state.

Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/AM8PR10MB470871DEBD1DED081F9CC391E4389@AM8PR10MB4708.EURPRD10.PROD.OUTLOOK.COM
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>