Peter Foley [Thu, 9 Jun 2011 00:58:32 +0000 (20:58 -0400)]
kbuild: silence Nothing to be done for 'all' message
This patch silences a Makefile.asm-generic message
by defining a dummy rule for all.
make -f /usr/src/git/scripts/Makefile.asm-generic \
obj=arch/x86/include/generated/asm
make[1]: Nothing to be done for `all'.
Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Guan Xuetao [Thu, 26 May 2011 10:17:43 +0000 (18:17 +0800)]
unicore32: using generic-y format for one line asm-generic files
The patch adds one-line asm-generic files in arch/unicore32/include/asm/Kbuild
Also, remove the old implementation in arch/unicore32/Makefile
see commit from Sam Ravnborg <
d8ecc5cd8e227bc318513b5306ae88a474b8886d>
kbuild: asm-generic support
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Guan Xuetao [Thu, 26 May 2011 09:19:20 +0000 (17:19 +0800)]
unicore32: change PERCPU to PERCPU_SECTION
The patch changes PERCPU to PERCPU_SECTION
see commit from Tejun Heo <
0415b00d175e0d8945e6785aad21b5f157976ce0>
percpu: Always align percpu output section to PAGE_SIZE
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Tejun Heo <tj@kernel.org>
Guan Xuetao [Mon, 16 May 2011 07:28:19 +0000 (15:28 +0800)]
unicore32: add KBUILD_DEFCONFIG with unicore32_defconfig (old debug_defconfig)
Rename debug_defconfig to unicore32_defconfig, which is a minimal config for
PKUnity-v3 (130nm) SoC board.
Also, add KBUILD_DEFCONFIG to use 'make defconfig'.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Guan Xuetao [Wed, 20 Apr 2011 11:06:53 +0000 (19:06 +0800)]
unicore32: change zImage physical address, though it's PIC codes
U-boot will load the kernel image to 48M physical memory address.
The patch changes it to the correct address, though it's PIC codes.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Guan Xuetao [Thu, 26 May 2011 08:43:27 +0000 (16:43 +0800)]
unicore32: move rtc-puv3.c to drivers/rtc directory
The patch moves rtc driver for PKUnity-v3 SoC from arch/unicore32/kernel/
to drivers/rtc/, with renaming it to rtc-puv3.c.
Also, Kconfig, Makefile, and MAINTAINERS are modified correspondingly.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>
WANG Cong [Thu, 9 Jun 2011 07:28:13 +0000 (00:28 -0700)]
netpoll: prevent netpoll setup on slave devices
In commit
8d8fc29d02a33e4bd5f4fa47823c1fd386346093
(netpoll: disable netpoll when enslave a device), we automatically
disable netpoll when the underlying device is being enslaved,
we also need to prevent people from setuping netpoll on
devices that are already enslaved.
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 8 Jun 2011 06:07:07 +0000 (06:07 +0000)]
net: pmtu_expires fixes
commit
2c8cec5c10bc (ipv4: Cache learned PMTU information in inetpeer)
added some racy peer->pmtu_expires accesses.
As its value can be changed by another cpu/thread, we should be more
careful, reading its value once.
Add peer_pmtu_expired() and peer_pmtu_cleaned() helpers
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ingo Molnar [Thu, 9 Jun 2011 07:14:34 +0000 (09:14 +0200)]
Merge branch 'urgent' of git://git./linux/kernel/git/rric/oprofile into perf/urgent
Wu Jiajun-B06378 [Tue, 7 Jun 2011 21:46:51 +0000 (21:46 +0000)]
gianfar:localized filer table
Each eTSEC device should own localized filer table.
Signed-off-by: Jiajun Wu <b06378@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Herrenschmidt [Thu, 9 Jun 2011 06:52:38 +0000 (16:52 +1000)]
powerpc: Force page alignment for initrd reserved memory
When using 64K pages with a separate cpio rootfs, U-Boot will align
the rootfs on a 4K page boundary. When the memory is reserved, and
subsequent early memblock_alloc is called, it will allocate memory
between the 64K page alignment and reserved memory. When the reserved
memory is subsequently freed, it is done so by pages, causing the
early memblock_alloc requests to be re-used, which in my case, caused
the device-tree to be clobbered.
This patch forces the reserved memory for initrd to be kernel page
aligned, and will move the device tree if it overlaps with the range
extension of initrd. This patch will also consolidate the identical
function free_initrd_mem() from mm/init_32.c, init_64.c to mm/mem.c,
and adds the same range extension when freeing initrd. free_initrd_mem()
is also moved to the __init section.
Many thanks to Milton Miller for his input on this patch.
[BenH: Fixed build without CONFIG_BLK_DEV_INITRD]
Signed-off-by: Dave Carroll <dcarroll@astekcorp.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Thu, 9 Jun 2011 04:46:32 +0000 (14:46 +1000)]
Merge remote branch 'kumar/merge' into merge
Benjamin Herrenschmidt [Thu, 9 Jun 2011 04:46:12 +0000 (14:46 +1000)]
Merge remote branch 'gcl/powerpc/merge' into merge
John Johansen [Wed, 8 Jun 2011 22:07:47 +0000 (15:07 -0700)]
AppArmor: Fix sleep in invalid context from task_setrlimit
Affected kernels 2.6.36 - 3.0
AppArmor may do a GFP_KERNEL memory allocation with task_lock(tsk->group_leader);
held when called from security_task_setrlimit. This will only occur when the
task's current policy has been replaced, and the task's creds have not been
updated before entering the LSM security_task_setrlimit() hook.
BUG: sleeping function called from invalid context at mm/slub.c:847
in_atomic(): 1, irqs_disabled(): 0, pid: 1583, name: cupsd
2 locks held by cupsd/1583:
#0: (tasklist_lock){.+.+.+}, at: [<
ffffffff8104dafa>] do_prlimit+0x61/0x189
#1: (&(&p->alloc_lock)->rlock){+.+.+.}, at: [<
ffffffff8104db2d>]
do_prlimit+0x94/0x189
Pid: 1583, comm: cupsd Not tainted 3.0.0-rc2-git1 #7
Call Trace:
[<
ffffffff8102ebf2>] __might_sleep+0x10d/0x112
[<
ffffffff810e6f46>] slab_pre_alloc_hook.isra.49+0x2d/0x33
[<
ffffffff810e7bc4>] kmem_cache_alloc+0x22/0x132
[<
ffffffff8105b6e6>] prepare_creds+0x35/0xe4
[<
ffffffff811c0675>] aa_replace_current_profile+0x35/0xb2
[<
ffffffff811c4d2d>] aa_current_profile+0x45/0x4c
[<
ffffffff811c4d4d>] apparmor_task_setrlimit+0x19/0x3a
[<
ffffffff811beaa5>] security_task_setrlimit+0x11/0x13
[<
ffffffff8104db6b>] do_prlimit+0xd2/0x189
[<
ffffffff8104dea9>] sys_setrlimit+0x3b/0x48
[<
ffffffff814062bb>] system_call_fastpath+0x16/0x1b
Signed-off-by: John Johansen <john.johansen@canonical.com>
Reported-by: Miles Lane <miles.lane@gmail.com>
Cc: stable@kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
Wolfram Sang [Sat, 12 Mar 2011 16:44:10 +0000 (17:44 +0100)]
dtc/powerpc: remove obsolete .gitignore entries
dtc was moved and .gitignores have been added to the new location. So, we can
delete the old, forgotten ones.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Linus Torvalds [Wed, 8 Jun 2011 22:58:51 +0000 (15:58 -0700)]
Merge branch 'pm-fixes' of git://git./linux/kernel/git/rafael/suspend-2.6
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
PM / Runtime: Fix loops in pm_runtime_clk_notify()
PM / Intel IOMMU: Fix init_iommu_pm_ops() for CONFIG_PM unset
Tomoya MORINAGA [Tue, 7 Jun 2011 05:50:11 +0000 (14:50 +0900)]
spi/topcliff_pch: DMA support
This patch enables this SPI driver works with DMA mode.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Tomoya MORINAGA [Tue, 7 Jun 2011 05:50:10 +0000 (14:50 +0900)]
spi/topcliff_pch: support new device ML7213 IOH
Support ML7213 device of OKI SEMICONDUCTOR.
ML7213 is companion chip of Intel Atom E6xx series for IVI(In-Vehicle Infotainment).
ML7213 is compatible for Intel EG20T PCH.
v4: - Delete unrelated whitespace
- Prevent device driver from accessing platform data
- Add __devinit and __devexit
- Save pdev->dev to pd_dev->dev.parent
- Have own suspend/resume processing in platform_driver.
- Care returned value in pch_spi_init
- Change unregister order
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Linus Torvalds [Wed, 8 Jun 2011 22:18:19 +0000 (15:18 -0700)]
vfs: reorganize 'struct inode' layout a bit
This tries to make the 'struct inode' accesses denser in the data cache
by moving a commonly accessed field (i_security) closer to other fields
that are accessed often.
It also makes 'i_state' just an 'unsigned int' rather than 'unsigned
long', since we only use a few bits of that field, and moves it next to
the existing 'i_flags' so that we potentially get better structure
layout (although depending on config options, i_flags may already have
packed in the same word as i_lock, so this improves packing only for the
case of spinlock debugging)
Out 'struct inode' is still way too big, and we should probably move
some other fields around too (the acl fields in particular) for better
data cache access density. Other fields (like the inode hash) are
likely to be entirely irrelevant under most loads.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 8 Jun 2011 22:11:56 +0000 (15:11 -0700)]
selinux: simplify and clean up inode_has_perm()
This is a rather hot function that is called with a potentially NULL
"struct common_audit_data" pointer argument. And in that case it has to
provide and initialize its own dummy common_audit_data structure.
However, all the _common_ cases already pass it a real audit-data
structure, so that uncommon NULL case not only creates a silly run-time
test, more importantly it causes that function to have a big stack frame
for the dummy variable that isn't even used in the common case!
So get rid of that stupid run-time behavior, and make the (few)
functions that currently call with a NULL pointer just call a new helper
function instead (naturally called inode_has_perm_noapd(), since it has
no adp argument).
This makes the run-time test be a static code generation issue instead,
and allows for a much denser stack since none of the common callers need
the dummy structure. And a denser stack not only means less stack space
usage, it means better cache behavior. So we have a win-win-win from
this simplification: less code executed, smaller stack footprint, and
better cache behavior.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mika Westerberg [Sun, 29 May 2011 10:10:06 +0000 (13:10 +0300)]
spi/ep93xx: add DMA support
This patch adds DMA support for the EP93xx SPI driver. By default the DMA is
not enabled but it can be enabled by setting ep93xx_spi_info.use_dma to true
in board configuration file.
Note that the SPI driver still uses PIO for small transfers (<= 8 bytes) for
performance reasons.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Mika Westerberg [Sun, 29 May 2011 10:10:05 +0000 (13:10 +0300)]
ep93xx: remove the old M2P DMA code
Since we have converted all existing users of the old DMA API to use the DMA
engine API the old code can be dropped.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Ryan Mallon <rmallon@gmail.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Mika Westerberg [Sun, 29 May 2011 10:10:04 +0000 (13:10 +0300)]
ASoC: ep93xx: convert to use the DMA engine API
Now that we have the EP93xx DMA engine driver in place, we convert the ASoC
drivers (I2S, AC97 and PCM) to take advantage of this new API. There are no
functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Mika Westerberg [Sun, 29 May 2011 10:10:03 +0000 (13:10 +0300)]
ep93xx: add dmaengine platform code
Add platform support code for the new EP93xx dmaengine driver.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Ryan Mallon <rmallon@gmail.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Linus Torvalds [Wed, 8 Jun 2011 21:27:48 +0000 (14:27 -0700)]
Merge branch 'usb-linus' of git://git./linux/kernel/git/gregkh/usb-2.6
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (28 commits)
MAINTAINERS: add a maintainer to Gadget Framework
USB: serial: add another 4N-GALAXY.DE PID to ftdi_sio driver
Revert "USB: option: add ID for ZTE MF 330"
drivers/usb/host/ohci-pxa27x.c: add missing clk_put
USB: CONFIG_USB_GADGET_DUALSPEED is not user-configurable
USB: dummy-hcd needs the has_tt flag
usb-storage: redo incorrect reads
usb/renesas_usbhs: free uep on removal
usb/s3c-hsudc: fix error path
usb/pxa25x_udc: cleanup the LUBBOCK err path
usb/mv_udc_core: fix compile
usb: gadget: include <linux/prefetch.h> to fix compiling error
USB: s3c-hsotg: Tone down debugging
usb: remove bad dput after dentry_unhash
USB: core: Tolerate protocol stall during hub and port status read
musb: fix prefetch build failure
USB: cdc-acm: Adding second ACM channel support for Nokia E7 and C7
usb-gadget: unlock data->lock mutex on error path in ep_write()
USB: option Add blacklist for ZTE K3765-Z (19d2:2002)
option: add Prolink PH300 modem IDs
...
Mika Westerberg [Sun, 29 May 2011 10:10:02 +0000 (13:10 +0300)]
dmaengine: add ep93xx DMA support
The ep93xx DMA controller has 10 independent memory to peripheral (M2P)
channels, and 2 dedicated memory to memory (M2M) channels. M2M channels can
also be used by SPI and IDE to perform DMA transfers to/from their memory
mapped FIFOs.
This driver supports both M2P and M2M channels with DMA_SLAVE, DMA_CYCLIC and
DMA_MEMCPY (M2M only) capabilities.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Ryan Mallon <rmallon@gmail.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Felipe Balbi [Wed, 8 Jun 2011 16:16:28 +0000 (19:16 +0300)]
MAINTAINERS: add a maintainer to Gadget Framework
I'll be continuing the amazing work Dave has
done with the Gadget Framework.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Torvalds [Wed, 8 Jun 2011 20:54:46 +0000 (13:54 -0700)]
Merge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6
* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6:
spi/rtc-m41t93: Use spi_get_drvdata() for SPI devices
spi/omap2: fix uninitialized variable
Linus Torvalds [Wed, 8 Jun 2011 20:54:29 +0000 (13:54 -0700)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: trivial: add space in fsc error message
cifs: silence printk when establishing first session on socket
CIFS ACL support needs CONFIG_KEYS, so depend on it
possible memory corruption in cifs_parse_mount_options()
cifs: make CIFS depend on CRYPTO_ECB
cifs: fix the kernel release version in the default security warning message
Greg Kroah-Hartman [Wed, 8 Jun 2011 20:50:00 +0000 (13:50 -0700)]
Merge 3.0-rc2 + Linus's latest into usb-linus
This is needed to get the following MAINTAINERS patch to apply properly.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Steffen Sledz [Tue, 7 Jun 2011 12:01:56 +0000 (14:01 +0200)]
USB: serial: add another 4N-GALAXY.DE PID to ftdi_sio driver
E.g. newer CAN 2.0 A/B <=> USB 2.0 converters report idProduct=f3c2.
Signed-off-by: Steffen Sledz <sledz@dresearch-fe.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Josef Bacik [Mon, 6 Jun 2011 14:50:35 +0000 (10:50 -0400)]
Btrfs: fix duplicate checking logic
When merging my code into the integration test the second check for duplicate
entries got screwed up. This patch fixes it by dropping ret2 and just using ret
for the return value, and checking if we got an error before adding the bitmap
to the local list. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Josef Bacik [Fri, 27 May 2011 20:11:38 +0000 (16:11 -0400)]
Btrfs: fix the allocator loop logic
I was testing with empty_cluster = 0 to try and reproduce a problem and kept
hitting early enospc panics. This was because our loop logic was a little
confused. So this is what I did
1) Make the loop variable the ultimate decider on wether we should loop again
isntead of checking to see if we had an uncached bg, empty size or empty
cluster.
2) Increment loop before checking to see what we are on to make the loop
definitions make more sense.
3) If we are on the chunk alloc loop don't set empty_size/empty_cluster to 0
unless we didn't actually allocate a chunk. If we did allocate a chunk we
should be able to easily setup a new cluster so clearing
empty_size/empty_cluster makes us less efficient.
This kept me from hitting panics while trying to reproduce the other problem.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Josef Bacik [Fri, 27 May 2011 18:07:49 +0000 (14:07 -0400)]
Btrfs: fix bitmap regression
In cleaning up the clustering code I accidently introduced a regression by
adding bitmap entries to the cluster rb tree. The problem is if we've maxed out
the number of bitmaps we can have for the block group we can only add free space
to the bitmaps, but since the bitmap is on the cluster we can't find it and we
try to create another one. This would result in a panic because the total
bitmaps was bigger than the max bitmaps that were allowed. This patch fixes
this by checking to see if we have a cluster, and then looking at the cluster rb
tree to see if it has a bitmap entry and if it does and that space belongs to
that bitmap, go ahead and add it to that bitmap.
I could hit this panic every time with an fs_mark test within a couple of
minutes. With this patch I no longer hit the panic and fs_mark goes to
completion. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Grant Likely [Wed, 8 Jun 2011 20:37:22 +0000 (14:37 -0600)]
Merge remote-tracking branch 'origin' into spi/merge
Geert Uytterhoeven [Wed, 8 Jun 2011 19:48:03 +0000 (21:48 +0200)]
spi/rtc-m41t93: Use spi_get_drvdata() for SPI devices
One new offender detected by the recently increased type checking in
platform_get_drvdata():
drivers/rtc/rtc-m41t93.c: In function ‘m41t93_remove’:
drivers/rtc/rtc-m41t93.c:192: warning: passing argument 1 of ‘platform_get_drvdata’ from incompatible pointer type
Use spi_get_drvdata() instead of platform_get_drvdata(), cfr. commit
42fea15d6dc410e62dac6a764142045280624a5b ("spi/rtc-{ds1390,ds3234,m41t94}:
Use spi_get_drvdata() for SPI devices")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Josef Bacik [Wed, 25 May 2011 17:10:16 +0000 (13:10 -0400)]
Btrfs: don't commit the transaction if we dont have enough pinned bytes
I noticed when running an enospc test that we would get stuck committing the
transaction in check_data_space even though we truly didn't have enough space.
So check to see if bytes_pinned is bigger than num_bytes, if it's not don't
commit the transaction. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Josef Bacik [Wed, 25 May 2011 17:07:37 +0000 (13:07 -0400)]
Btrfs: noinline the cluster searching functions
When profiling the find cluster code it's hard to tell where we are spending our
time because the bitmap and non-bitmap functions get inlined by the compiler, so
make that not happen. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Josef Bacik [Wed, 25 May 2011 17:03:16 +0000 (13:03 -0400)]
Btrfs: cache bitmaps when searching for a cluster
If we are looking for a cluster in a particularly sparse or fragmented block
group, we will do a lot of looping through the free space tree looking for
various things, and if we need to look at bitmaps we will endup doing the whole
dance twice. So instead add the bitmap entries to a temporary list so if we
have to do the bitmap search we can just look through the list of entries we've
found quickly instead of having to loop through the entire tree again. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Linus Torvalds [Wed, 8 Jun 2011 19:03:37 +0000 (12:03 -0700)]
Merge branch 'stable/bug.fixes' of git://git./linux/kernel/git/konrad/xen
* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: off by one errors in multicalls.c
xen: use the trigger info we already have to choose the irq handler
Stanislaw Gruszka [Wed, 8 Jun 2011 13:26:31 +0000 (15:26 +0200)]
iwlegacy: fix channel switch locking
We use priv->mutex to avoid race conditions between chswitch_done()
and mac_channel_switch(), when marking channel switch in
progress. But chswitch_done() can be called in atomic context
from rx_csa() or with mutex already taken from commit_rxon().
To fix remove mutex from chswitch_done() and use atomic bitops
for marking channel switch pending.
Cc: stable@kernel.org # 2.6.39+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Wed, 8 Jun 2011 11:27:29 +0000 (13:27 +0200)]
mac80211: fix IBSS teardown race
Ignacy reports that sometimes after leaving an IBSS
joining a new one didn't work because there still
were stations on the list. He fixed it by flushing
stations when attempting to join a new IBSS, but
this shouldn't be happening in the first case. When
I looked into it I saw a race condition in teardown
that could cause stations to be added after flush,
and thus cause this situation. Ignacy confirms that
after applying my patch he hasn't seen this happen
again.
Reported-by: Ignacy Gawedzki <i@lri.fr>
Debugged-by: Ignacy Gawedzki <i@lri.fr>
Tested-by: Ignacy Gawedzki <i@lri.fr>
Cc: stable@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Wey-Yi Guy [Fri, 27 May 2011 15:40:24 +0000 (08:40 -0700)]
iwlagn: send tx power command if defer cause by RXON not match
During channge channel, tx power will not send to uCode, the tx power command
should send after scan complete. but should also can send after RXON command.
Stable fix identified by Stanislaw Gruszka <sgruszka@redhat.com>.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Cc: stable@kernel.org [2.6.38+]
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Greg Kroah-Hartman [Wed, 8 Jun 2011 16:18:32 +0000 (09:18 -0700)]
Staging: cx23885: fix include of altera.h
The cx23885 driver was including staging/altera.h, but that file has
moved back into the driver directory.
Why a non-staging driver was including a staging driver is beyond me,
but this fixes the build so everything is happy for now.
For the record, it's not ok for a non-staging driver to depend on a
staging one, as that implies that the non-staging one should also be in
the staging tree if that's needed.
Cc: Igor M. Liplianin <liplianin@netup.ru>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jeff Layton [Wed, 8 Jun 2011 11:35:24 +0000 (07:35 -0400)]
cifs: trivial: add space in fsc error message
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Linus Torvalds [Wed, 8 Jun 2011 15:36:15 +0000 (08:36 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf: Fix comments in include/linux/perf_event.h
perf: Comment /proc/sys/kernel/perf_event_paranoid to be part of user ABI
perf python: Fix argument name list of read_on_cpu()
perf evlist: Don't die if sample_{id_all|type} is invalid
perf python: Use exception to propagate errors
perf evlist: Remove dependency on debug routines
perf, cgroups: Fix up for new API
Linus Torvalds [Wed, 8 Jun 2011 15:22:29 +0000 (08:22 -0700)]
Merge branch 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6
* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6:
gpio/samsung: make Kconfig options def_bool
gpio/exynos4: Fix incorrect mapping of gpio pull-up macro to register setting
GPIO: OMAP: add locking around calls to _set_gpio_triggering
GPIO: OMAP: fix setting IRQWAKEN bits for OMAP4
GPIO: OMAP: fix section mismatch warnings
gpio: Fix gpio-exynos4 build fails in mainline
Linus Torvalds [Wed, 8 Jun 2011 15:21:48 +0000 (08:21 -0700)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
[media] soc_camera: preserve const attribute
[media] uvc_entity: initialize return value
[media] media: Fix media device minor registration
[media] Make nchg variable signed because the code compares this variable against negative values
[media] omap3isp: fix compiler warning
[media] v4l: Fix media_entity_to_video_device macro argument name
[media] ivtv: Internally separate encoder & decoder standard setting
[media] ivtvfb: Add sanity check to ivtvfb_pan_display()
[media] ivtvfb: use display information in info not in var for panning
[media] ivtv: Make two ivtv_msleep_timeout calls uninterruptable
[media] anysee: return EOPNOTSUPP for unsupported I2C messages
[media] gspca - ov519: Set the default frame rate to 15 fps
[media] gspca - stv06xx: Set a lower default value of gain for hdcs sensors
[media] gspca: Remove coarse_expo_autogain.h
[media] gspca - ov519: Change the ovfx2 bulk transfer size
[media] gspca - ov519: Fix a regression for ovfx2 webcams
Linus Torvalds [Wed, 8 Jun 2011 15:19:14 +0000 (08:19 -0700)]
Merge branch 'drm-radeon-urgent' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-radeon-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon/kms: disable hdmi audio by default
drm/radeon/kms: fix for radeon on systems >4GB without hardware iommu
drm/radeon/kms: set family for use in parser.
Grant Likely [Wed, 8 Jun 2011 15:12:16 +0000 (09:12 -0600)]
Merge branch 'for_3.0/gpio-fixes' of git://git./linux/kernel/git/khilman/linux-omap-pm into gpio/merge
Linus Torvalds [Wed, 8 Jun 2011 14:46:30 +0000 (07:46 -0700)]
tty_buffer: get rid of 'seen_tail' logic in flush_to_ldisc
The flush_to_ldisc() work entry has special logic to notice when it has
seen the original tail of the data queue, and it avoids continuing the
flush if it sees that _original_ tail rather than the current tail.
This logic can trigger in case somebody is constantly adding new data to
the tty while the flushing is active - and the intent is to avoid
excessive CPU usage while flushing the tty, especially as we used to do
this from a softirq context which made it non-preemptible.
However, since we no longer re-arm the work-queue from within itself
(because that causes other trouble: see commit
a5660b41af6a "tty: fix
endless work loop when the buffer fills up"), this just leads to
possible hung tty's (most easily seen in SMP and with a test-program
that floods a pty with data - nobody seems to have reported this for any
real-life situation yet).
And since the workqueue isn't done from timers and softirq's any more,
it's doubtful whether the CPU useage issue is really relevant any more.
So just remove the logic entirely, and see if anybody ever notices.
Alternatively, we might want to re-introduce the "re-arm the work" for
just this case, but then we'd have to re-introduce the delayed work
model or some explicit timer, which really doesn't seem worth it for
this.
Reported-and-tested-by: Guillaume Chazarain <guichaz@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark Brown [Tue, 7 Jun 2011 22:42:04 +0000 (23:42 +0100)]
ASoC: Fix WM8962 headphone volume update for use of advanced caches
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Cc: stable@kernel.org
Ingo Molnar [Wed, 8 Jun 2011 14:09:55 +0000 (16:09 +0200)]
Merge branch 'tip/perf/urgent-2' of git://git./linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent
Ingo Molnar [Wed, 8 Jun 2011 13:49:03 +0000 (15:49 +0200)]
Merge branch 'urgent' of git://git./linux/kernel/git/rric/oprofile into perf/urgent
Alex Deucher [Mon, 6 Jun 2011 21:39:16 +0000 (17:39 -0400)]
drm/radeon/kms: disable hdmi audio by default
The current RE'd code causes blank screens and
display problems on a lot of systems. So disable
it by default for now. It can still be enabled
by setting the audio parameter to 1. E.g.:
radeon.audio=1
Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=38010
https://bugs.freedesktop.org/show_bug.cgi?id=27731
https://bugs.freedesktop.org/show_bug.cgi?id=35970
https://bugs.freedesktop.org/show_bug.cgi?id=26195
and many other reported problems.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Haid [Wed, 8 Jun 2011 10:04:45 +0000 (20:04 +1000)]
drm/radeon/kms: fix for radeon on systems >4GB without hardware iommu
On my x86_64 system with >4GB of ram and swiotlb instead of
a hardware iommu (because I have a VIA chipset), the call
to pci_set_dma_mask (see below) with 40bits returns an error.
But it seems that the radeon driver is designed to have
need_dma32 = true exactly if pci_set_dma_mask is called
with 32 bits and false if it is called with 40 bits.
I have read somewhere that the default are 32 bits. So if the
call fails I suppose that need_dma32 should be set to true.
And indeed the patch fixes the problem I have had before
and which I had described here:
http://choon.net/forum/read.php?21,106131,115940
Acked-by: Alex Deucher <alexdeucher@gmail.com>
cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 8 Jun 2011 09:58:29 +0000 (19:58 +1000)]
drm/radeon/kms: set family for use in parser.
Wierdly the kms parser never initialised the family, it wasn't really used
much, but the fmt checker patch started using it and it fell over.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Thomas Gleixner [Tue, 20 Jul 2010 12:34:50 +0000 (14:34 +0200)]
x86: cpu-hotplug: Prevent softirq wakeup on wrong CPU
After a newly plugged CPU sets the cpu_online bit it enables
interrupts and goes idle. The cpu which brought up the new cpu waits
for the cpu_online bit and when it observes it, it sets the cpu_active
bit for this cpu. The cpu_active bit is the relevant one for the
scheduler to consider the cpu as a viable target.
With forced threaded interrupt handlers which imply forced threaded
softirqs we observed the following race:
cpu 0 cpu 1
bringup(cpu1);
set_cpu_online(smp_processor_id(), true);
local_irq_enable();
while (!cpu_online(cpu1));
timer_interrupt()
-> wake_up(softirq_thread_cpu1);
-> enqueue_on(softirq_thread_cpu1, cpu0);
^^^^
cpu_notify(CPU_ONLINE, cpu1);
-> sched_cpu_active(cpu1)
-> set_cpu_active((cpu1, true);
When an interrupt happens before the cpu_active bit is set by the cpu
which brought up the newly onlined cpu, then the scheduler refuses to
enqueue the woken thread which is bound to that newly onlined cpu on
that newly onlined cpu due to the not yet set cpu_active bit and
selects a fallback runqueue. Not really an expected and desirable
behaviour.
So far this has only been observed with forced hard/softirq threading,
but in theory this could happen without forced threaded hard/softirqs
as well. It's probably unobservable as it would take a massive
interrupt storm on the newly onlined cpu which causes the softirq loop
to wake up the softirq thread and an even longer delay of the cpu
which waits for the cpu_online bit.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@kernel.org # 2.6.39
Sage Weil [Wed, 25 May 2011 21:56:12 +0000 (14:56 -0700)]
ceph: unwind canceled flock state
If we request a lock and then abort (e.g., ^C), we need to send a matching
unlock request to the MDS to unwind our lock attempt to avoid indefinitely
blocking other clients.
Reported-by: Brian Chrisman <brchrisman@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 8 Jun 2011 03:40:35 +0000 (20:40 -0700)]
ceph: fix ENOENT logic in striped_read
Getting ENOENT is equivalent to reading 0 bytes. Make that correction
before setting up the hit_stripe and was_short flags.
Fixes the following case:
dd if=/dev/zero of=/mnt/fs_depot/dd3 bs=1 seek=1048576 count=0
dd if=/mnt/fs_depot/dd3 of=/root/ddout1 skip=8 bs=500 count=2 iflag=direct
Reported-by: Henry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Wed, 1 Jun 2011 23:08:44 +0000 (16:08 -0700)]
ceph: fix short sync reads from the OSD
If we get a short read from the OSD because the object is small, we need to
zero the remainder of the buffer. For O_DIRECT reads, the attempted range
is not trimmed to i_size by the VFS, so we were actually looping
indefinitely.
Fix by trimming by i_size, and the unconditionally zeroing the trailing
range.
Reported-by: Jeff Wu <cpwu@tnsoft.com.cn>
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Fri, 3 Jun 2011 16:37:09 +0000 (09:37 -0700)]
ceph: fix sync vs canceled write
If we cancel a write, trigger the safe completions to prevent a sync from
blocking indefinitely in ceph_osdc_sync().
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil [Fri, 27 May 2011 16:24:26 +0000 (09:24 -0700)]
ceph: use ihold when we already have an inode ref
We should use ihold whenever we already have a stable inode ref, even
when we aren't holding i_lock. This avoids adding new and unnecessary
locking dependencies.
Signed-off-by: Sage Weil <sage@newdream.net>
Steffen Klassert [Sun, 5 Jun 2011 20:46:03 +0000 (20:46 +0000)]
xfrm: Fix off by one in the replay advance functions
We may write 4 byte too much when we reinitialize the anti replay
window in the replay advance functions. This patch fixes this by
adjusting the last index of the initialization loop.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 8 Jun 2011 02:21:11 +0000 (19:21 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
genirq: Ensure we locate the passed IRQ in irq_alloc_descs()
genirq: Fix descriptor init on non-sparse IRQs
irq: Handle spurios irq detection for threaded irqs
genirq: Print threaded handler in spurious debug output
Linus Torvalds [Wed, 8 Jun 2011 02:20:53 +0000 (19:20 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86/amd-iommu: Fix boot crash with hidden PCI devices
x86/amd-iommu: Use only per-device dma_ops
x86/amd-iommu: Fix 3 possible endless loops
Linus Torvalds [Wed, 8 Jun 2011 02:20:28 +0000 (19:20 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Fix/clarify set_task_cpu() locking rules
lockdep: Fix lock_is_held() on recursion
sched: Fix schedstat.nr_wakeups_migrate
sched: Fix cross-cpu clock sync on remote wakeups
Linus Torvalds [Wed, 8 Jun 2011 02:09:26 +0000 (19:09 -0700)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/nv40: fall back to paged dma object for the moment
drm/nouveau: fix leak of gart mm node
drm/nouveau: fix vram page mapping when crossing page table boundaries
drm/nv17-nv40: Fix modesetting failure when pitch == 4096px (fdo bug 35901).
drm/nouveau: don't create accel engine objects when noaccel=1
drm/nvc0: recognise 0xdX chipsets as NV_C0
drm/i915: Add a no lvds quirk for the Asus EeeBox PC EB1007
drm/i915: Share the common force-audio property between connectors
drm/i915: Remove unused enum "chip_family"
drm/915: fix relaxed tiling on gen2: tile height
drm/i915/crt: Explicitly return false if connected to a digital monitor
drm/i915: Replace ironlake_compute_wm0 with g4x_compute_wm0
drm/i915: Only print out the actual number of fences for i915_error_state
drm/i915: s/addr & ~PAGE_MASK/offset_in_page(addr)/
drm: i915: correct return status in intel_hdmi_mode_valid()
drm/i915: fix regression after clock gating init split
drm/i915: fix if statement in ivybridge irq handler
Linus Torvalds [Wed, 8 Jun 2011 02:09:17 +0000 (19:09 -0700)]
Merge branch 'drm-radeon-fixes' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-radeon-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon/kms/atom: fix PHY init
drm/radeon/kms: add missing Evergreen texture formats to the CS parser
drm/radeon/kms: viewport height has to be even
drm/radeon/kms: remove duplicate reg from r600 safe regs
drm/radeon/kms: add support for Llano Fusion APUs
drm/radeon/kms: add llano pci ids
drm/radeon/kms: fill in asic struct for llano
drm/radeon/kms: add family ids for llano APUs
drm/radeon: fix oops in ttm reserve when pageflipping (v2)
drm/radeon/kms: clean up the radeon kms Kconfig
drm/radeon/kms: fix thermal sensor reading on juniper
drm/radeon/kms: add missing case for cayman thermal sensor
drm/radeon/kms: add blit support for cayman (v2)
drm/radeon/kms/blit: workaround some hw issues on evergreen+
Linus Torvalds [Wed, 8 Jun 2011 02:07:22 +0000 (19:07 -0700)]
Merge branch 'timers-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
timers: Consider slack value in mod_timer()
clockevents: Handle empty cpumask gracefully
Linus Torvalds [Wed, 8 Jun 2011 02:06:28 +0000 (19:06 -0700)]
Merge branch 'kvm-updates/3.0' of git://git./virt/kvm/kvm
* 'kvm-updates/3.0' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Initialize kvm before registering the mmu notifier
KVM: x86: use proper port value when checking io instruction permission
KVM: add missing void __user * cast to access_ok() call
Grant Likely [Mon, 6 Jun 2011 06:40:48 +0000 (00:40 -0600)]
MAINTAINERS: Saying goodbye to David Brownell
We had to say goodbye when David passed away recently. David had a
huge impact on our community, both personally in the lives of the
people he worked with, and technically in the design and maintenance
of several subsystems. He is greatly missed.
He also leaves behind a number of much loved subsystems now orphaned.
This patch updates the MAINTAINERS file for the areas that David was
responsible for and adds an entry for him to the CREDITS file.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Harry Wei <harryxiyou@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 8 Jun 2011 02:04:21 +0000 (19:04 -0700)]
Merge git://git./linux/kernel/git/hirofumi/fatfs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6:
fat: Fix corrupt inode flags when remove ATTR_SYS flag
David Howells [Mon, 6 Jun 2011 14:47:23 +0000 (15:47 +0100)]
MN10300: Add missing _sdata declaration
_sdata needs to be declared in the linker script now as of commit
a2d063ac216c ("extable, core_kernel_data(): Make sure all archs define
_sdata")
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Mon, 6 Jun 2011 14:47:14 +0000 (15:47 +0100)]
MN10300: die_if_no_fixup() shouldn't use get_user() as it doesn't call set_fs()
die_if_no_fixup() shouldn't use get_user() as it doesn't call set_fs() to
indicate that it wants to probe a kernel address. Instead it should use
probe_kernel_read().
This fixes the problem of gdb seeing SIGILL rather than SIGTRAP when hitting
the KGDB special breakpoint upon SysRq+g being seen. The problem was that
die_if_no_fixup() was failing to read the opcode of the instruction that caused
the exception, and thus not fixing up the exception.
This caused gdb to get a S04 response to the $? request in its remote protocol
rather than S05 - which would then cause it to continue with $C04 rather than
$c in an attempt to pass the signal onto the inferior process. The kernel,
however, does not support $Cnn, and so objects by returning an E22 response,
indicating an error. gdb does not expect this and prints:
warning: Remote failure reply: E22
and then returns to the gdb command prompt unable to continue.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Mon, 6 Jun 2011 14:47:05 +0000 (15:47 +0100)]
MN10300: Fix one of the kernel debugger cacheflush variants
One of the kernel debugger cacheflush variants escaped proper testing. Two of
the labels are wrong, being derived from the code that was copied to construct
the variant.
The first label results in the following assembler message:
AS arch/mn10300/mm/cache-dbg-flush-by-reg.o
arch/mn10300/mm/cache-dbg-flush-by-reg.S: Assembler messages:
arch/mn10300/mm/cache-dbg-flush-by-reg.S:123: Error: symbol `debugger_local_cache_flushinv_no_dcache' is already defined
And the second label results in the following linker message:
arch/mn10300/mm/built-in.o:(.text+0x1d39): undefined reference to `mn10300_local_icache_inv_range_reg_end'
arch/mn10300/mm/built-in.o:(.text+0x1d39): relocation truncated to fit: R_MN10300_PCREL16 against undefined symbol `mn10300_local_icache_inv_range_reg_end'
To test this file the following configuration pieces must be set:
CONFIG_AM34=y
CONFIG_MN10300_CACHE_WBACK=y
CONFIG_MN10300_DEBUGGER_CACHE_FLUSH_BY_REG=y
CONFIG_MN10300_CACHE_MANAGE_BY_REG=y
CONFIG_AM34_HAS_CACHE_SNOOP=n
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 8 Jun 2011 01:47:53 +0000 (18:47 -0700)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] fix kvm defines for 31 bit compile
[S390] use generic RCU page-table freeing code
[S390] qdio: Split SBAL entry flags
[S390] kvm-s390: fix stfle facilities numbers >=64
[S390] kvm-s390: Fix host crash on misbehaving guests
Linus Torvalds [Wed, 8 Jun 2011 01:46:37 +0000 (18:46 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/tmlind/linux-omap-2.6
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (21 commits)
ARM: OMAP4: MMC: increase delay for pbias
arm: omap2plus: move NAND_BLOCK_SIZE out of boards
omap4: hwmod: Enable the keypad
omap3: Free Beagle rev gpios when they are read, so others can read them later
arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC
omap: rx51: Don't power up speaker amplifier at bootup
omap: rx51: Set regulator V28_A always on
ARM: OMAP4: MMC: no regulator off during probe for eMMC
arm: omap2plus: fix ads7846 pendown gpio request
ARM: OMAP2: Add missing iounmap in omap4430_phy_init
ARM: omap4: Pass core and wakeup mux tables to omap4_mux_init
ARM: omap2+: mux: Allow board mux settings to be NULL
OMAP4: fix return value of omap4_l3_init
OMAP: iovmm: fix SW flags passed by user
arch/arm/mach-omap1/dma.c: Invert calls to platform_device_put and platform_device_del
OMAP2+: mux: fix compilation warnings
OMAP: SRAM: Fix warning: format '%08lx' expects type 'long unsigned int'
arm: omap3: cm-t3517: fix section mismatch warning
OMAP2+: Fix 9 section mismatch(es) warnings from mach-omap2/built-in.o
ARM: OMAP2: Add missing include of linux/gpio.h
...
Linus Torvalds [Wed, 8 Jun 2011 01:44:10 +0000 (18:44 -0700)]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
GFS2: Processes waiting on inode glock that no processes are holding
Linus Torvalds [Wed, 8 Jun 2011 01:41:26 +0000 (18:41 -0700)]
Merge branch 'fbdev-fixes-for-linus' of git://git./linux/kernel/git/lethal/fbdev-3.x
* 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-3.x:
video: Fix use-after-free by vga16fb on rmmod
video: Convert vmalloc/memset to vzalloc
efifb: Disallow manual bind and unbind
efifb: Fix mismatched request/release_mem_region
efifb: Enable write-combining
drivers/video/pxa168fb.c: add missing clk_put
drivers/video/imxfb.c: add missing clk_put
fbdev: bf537-lq035: add missing blacklight properties type
savagefb: Use panel CVT mode as default
fbdev: sh_mobile_lcdcfb: Fix up fallout from MERAM changes.
Linus Torvalds [Wed, 8 Jun 2011 01:36:59 +0000 (18:36 -0700)]
Merge branch 'for-linus-2' of git://git./linux/kernel/git/viro/vfs-2.6
* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
vfs: make unlink() and rmdir() return ENOENT in preference to EROFS
lmLogOpen() broken failure exit
usb: remove bad dput after dentry_unhash
more conservative S_NOSEC handling
Joe Perches [Fri, 3 Jun 2011 14:45:23 +0000 (14:45 +0000)]
sparc: Remove unnecessary semicolons
Semicolons are not necessary after switch/while/for/if braces
so remove them.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
oftedal [Wed, 1 Jun 2011 11:11:41 +0000 (11:11 +0000)]
Add support for allocating irqs for bootbus devices
Some devices that can generate interrupts are connected directly to the
CPU through the bootbus on sun4d. This patch allows IRQs to be allocated
for such devices. The information used for allocating interrupts for
sbus devices are present at the corresponding SBI node. For bootbus
devices this information is present in the bootbus node.
Signed-off-by: Kjetil Oftedal <oftedal@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
oftedal [Wed, 1 Jun 2011 11:04:20 +0000 (11:04 +0000)]
Do not skip interrupt sources in sun4d interrupt handler and acknowledge interrupts correctly
During the introduction of genirq on sparc32 bugs were introduced in
the interrupt handler for sun4d. The interrupts handler checks the status
of the various sbus interfaces in the system and generates a virtual
interrupt, based upon the location of the interrupt source. This lookup
was broken by restructuring the code in such a way that index and shift
operations were performed prior to comparing this against the values
read from the interrupt controllers.
This could cause the handler to loop eternally as the interrupt source
could be skipped before any check was performed. Additionally
sun4d_encode_irq performs shifting internally, so it should not be performed
twice.
In sun4d_unmask interrupts were not correctly acknowledged, as the
corresponding bit it the interrupt mask was not actually cleared.
Signed-off-by: Kjetil Oftedal <oftedal@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
oftedal [Wed, 1 Jun 2011 10:43:50 +0000 (10:43 +0000)]
Restructure sun4d_build_device_irq so that timer interrupts can be allocated
sun4d_build_device_irq was called without a valid platform_device when
the system timer was initialized on sun4d systems. This caused a NULL
pointer crash.
Josip Rodin suggested that the current sun4d_build_device_irq should be
split into two functions. So that the timer initialization could skip
the slot and sbus interface detection code in sun4d_build_device_irq, as
this does not make sence due to the timer interrupts not being generated
from a device located on sbus.
Signed-off-by: Kjetil Oftedal <oftedal@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Greg Kroah-Hartman [Tue, 7 Jun 2011 22:03:37 +0000 (15:03 -0700)]
Revert "USB: option: add ID for ZTE MF 330"
This reverts commit
a559d2c8c1bf652ea2d0ecd6ab4a250fcdb37db8.
Turns out that device id 0x1d6b:0x0002 is a USB hub, which causes havoc
when the option driver tries to bind to it.
So revert this as it doesn't seem to be needed at all.
Thanks to Michael Tokarev and Paweł Drobek for working on resolving this
issue.
Cc: Paweł Drobek <pawel.drobek@gmail.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rafael J. Wysocki [Tue, 7 Jun 2011 21:34:58 +0000 (23:34 +0200)]
PM / Runtime: Fix loops in pm_runtime_clk_notify()
The loops over connection ID strings in pm_runtime_clk_notify()
should actually iterate over the strings and not over the elements
of the first of them, so make them behave as appropriate.
This fixes a regression introduced by commit
600b776eb39a13a28b090
(OMAP1 / PM: Use generic clock manipulation routines for runtime PM).
Reported-and-tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Williams, Mitch A [Tue, 7 Jun 2011 21:22:57 +0000 (14:22 -0700)]
igb: fix i350 SR-IOV failture
When SR-IOV is enabled, i350 devices fail to pass traffic. This is due to
the driver attempting to enable RSS on the PF device, which is not
supported by the i350.
When max_vfs is specified on an i350 adapter, set the number of RSS queues
to 1.
This issue affects 2.6.39 as well.
CC: stable@kernel.org
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
H Hartley Sweeten [Tue, 7 Jun 2011 20:37:27 +0000 (14:37 -0600)]
gpio/samsung: make Kconfig options def_bool
The Samsung GPIO drivers are always built-in when the relevant
platform is selected. Change the Kconfig symbol to def_bool y
dependant on the platform.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Tejun Heo [Wed, 25 May 2011 11:19:39 +0000 (13:19 +0200)]
libata: fix unexpectedly frozen port after ata_eh_reset()
To work around controllers which can't properly plug events while
reset, ata_eh_reset() clears error states and ATA_PFLAG_EH_PENDING
after reset but before RESET is marked done. As reset is the final
recovery action and full verification of devices including onlineness
and classfication match is done afterwards, this shouldn't lead to
lost devices or missed hotplug events.
Unfortunately, it forgot to thaw the port when clearing EH_PENDING, so
if the condition happens after resetting an empty port, the port could
be left frozen and EH will end without thawing it, making the port
unresponsive to further hotplug events.
Thaw if the port is frozen after clearing EH_PENDING. This problem is
reported by Bruce Stenning in the following thread.
http://thread.gmane.org/gmane.linux.kernel/1123265
stable: I think we should weather this patch a bit longer in -rcX
before sending it to -stable. Please wait at least a month
after this patch makes upstream. Thanks.
-v2: Fixed spelling in the comment per Dave Howorth.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Bruce Stenning <b.stenning@indigovision.com>
Cc: stable@kernel.org
Cc: Dave Howorth <dhoworth@mrc-lmb.cam.ac.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Rafael J. Wysocki [Tue, 7 Jun 2011 19:32:31 +0000 (21:32 +0200)]
PM / Intel IOMMU: Fix init_iommu_pm_ops() for CONFIG_PM unset
If CONFIG_PM is not set, init_iommu_pm_ops() introduced by commit
134fac3f457f3dd753ecdb25e6da3e5f6629f696 (PCI / Intel IOMMU: Use
syscore_ops instead of sysdev class and sysdev) is not defined
appropriately. Fix this issue.
Reported-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Andre Bartke [Wed, 1 Jun 2011 22:21:45 +0000 (00:21 +0200)]
staging: iio: error case memory leak fix
The data pointer should be freed in the error
cases of adis16400_trigger_handler().
Signed-off-by: Andre Bartke <andre.bartke@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasanthakumar Thiagarajan [Wed, 1 Jun 2011 08:14:11 +0000 (13:44 +0530)]
staging: ath6kl: Fix a kernel panic during suspend/resume
The kernel panic happens when we try to complete a pending
scan request while going to suspend state. The cause for this
kernel panic is accessing a freed memory (ar->arWmin). This
is freed before ar6k_cfg80211_scanComplete_event() getting
called where it is dereferenced.
RIP: 0010:[<
ffffffffa042e726>] [<
ffffffffa042e726>] wlan_iterate_nodes+0x16/0xc0 [ath6kl]
RSP: 0018:
ffff8800719fbce8 EFLAGS:
00010296
RAX:
ffff880071bbcc00 RBX:
ffff880037b22520 RCX:
ffff880077413c80
RDX:
ffff880037b221c0 RSI:
ffffffffa041ef10 RDI:
0000000000000020
RBP:
ffff8800719fbd18 R08:
0000000000000001 R09:
0000000000000001
R10:
0000000000000400 R11:
0000000000000000 R12:
0000000000000010
R13:
ffff8800719fbdd8 R14:
00007fff83a84b60 R15:
0000000000000001
FS:
00007fdccb8a7700(0000) GS:
ffff880077400000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
CR2:
0000000000000148 CR3:
0000000070604000 CR4:
00000000000006f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000ffff0ff0 DR7:
0000000000000400
Process rmmod (pid: 1998, threadinfo
ffff8800719fa000, task
ffff880066712d80)
Stack:
0000000000000000 ffff880037b22520 0000000000000010 ffff8800719fbdd8
00007fff83a84b60 0000000000000001 ffff8800719fbd28 ffffffffa0429fe2
ffff8800719fbd58 ffffffffa041ee5f ffff8800719fbd58 ffff880037b22520
Call Trace:
[<
ffffffffa0429fe2>] wmi_iterate_nodes+0x12/0x20 [ath6kl]
[<
ffffffffa041ee5f>] ar6k_cfg80211_scanComplete_event+0x3f/0xf0 [ath6kl]
[<
ffffffffa04245f1>] ar6000_close+0x61/0x100 [ath6kl]
[<
ffffffff814d6736>] __dev_close_many+0x96/0x100
[<
ffffffff814d688d>] dev_close_many+0x9d/0x120
[<
ffffffff814d6a48>] rollback_registered_many+0xe8/0x290
[<
ffffffff814d6d16>] unregister_netdevice_queue+0x96/0x100
[<
ffffffff814d6ea0>] unregister_netdev+0x20/0x30
[<
ffffffffa0420259>] ar6000_destroy+0x119/0x180 [ath6kl]
[<
ffffffffa043182a>] ar6k_cleanup_module+0x2a/0x33 [ath6kl]
[<
ffffffff81098fde>] sys_delete_module+0x19e/0x270
[<
ffffffff815d7542>] system_call_fastpath+0x16/0x1b
Code: c3 0f 1f 40 00 48 89 df e8 68 ff ff ff eb df 66 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 08 0f 1f 44 00 00
8b af 28 01 00 00 4c 8d 7f 08 49 89 fc 48 89 f3 49 89 d6 41
RIP [<
ffffffffa042e726>] wlan_iterate_nodes+0x16/0xc0 [ath6kl]
RSP <
ffff8800719fbce8>
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Chang [Mon, 30 May 2011 06:28:25 +0000 (14:28 +0800)]
staging: gma500: get control from firmware framebuffer if conflicts
Many Linux distributions would enable vesafb in order to display
early stage boot splash. In this case, we will get garbled X
Window screen if running X fbdev on psbfb.
This is because fb0 is occupied by vesafb while psbfb is on fb1.
They tried to drive the same pieces of hardware at the same
time. With unmodified X start-up, it would try to use default
fb0 framebuffer device and unfortunately it is now broken
becaues fb1 supersedes it.
We should let psbfb takeover framebuffer control from vesafb
to get around this problem.
See also commit :
4410f3910947dcea8672280b3adecd53cec4e85e
Signed-off-by: Michael Chang <mchang@novell.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Patrik Jakobsson [Tue, 24 May 2011 12:04:56 +0000 (13:04 +0100)]
staging: gma500: Skip bogus LVDS VBT mode and check for LVDS before adding backlight
On the Fit-PC2 the VBT reports an invalid fixed panel mode for LVDS, this gets
in the way for SDVO. This patch makes VBT parsing skip the invalid mode. When
there is no LVDS output the backlight support crashes so the patch also checks
for this before enabling it.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arjan Mels [Fri, 20 May 2011 21:25:46 +0000 (23:25 +0200)]
staging: usbip: bugfix prevent driver unbind
Implemented pre_reset and post_reset methods of the driver to prevent the
driver from being unbound upon a device reset. Because of this also the
asynchronous reset introduced to prevent a race condition is no longer necessary
(and sometimes causes problems, because it comes later then expected).
Signed-off-by: Arjan Mels <arjan.mels@gmx.net>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Cc: Max Vozeler <max@vozeler.com>
Cc: usbip-devel <usbip-devel@lists.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Hennerich [Wed, 25 May 2011 12:42:07 +0000 (14:42 +0200)]
staging: iio: industrialio-trigger: set iio_poll_func private_data
Failure to set iio_poll_func private_data, causes zero pointer access
violations in all consumer trigger handlers.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Nicolas Kaiser [Wed, 25 May 2011 00:03:02 +0000 (02:03 +0200)]
staging: rts_pstor: use bitwise operator instead of logical one
Looks like a typo.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Tue, 17 May 2011 22:15:19 +0000 (15:15 -0700)]
staging: fix ath6kl build when CFG80211 is not enabled
Fix build errors when CONFIG_CFG80211 is not enabled:
drivers/built-in.o: In function `ar6k_cfg80211_deinit':
(.text+0x189b71): undefined reference to `cfg80211_scan_done'
drivers/built-in.o: In function `ar6k_cfg80211_deinit':
(.text+0x189b86): undefined reference to `wiphy_unregister'
drivers/built-in.o: In function `ar6k_cfg80211_deinit':
(.text+0x189b8d): undefined reference to `wiphy_free'
drivers/built-in.o: In function `ar6k_cfg80211_init':
(.text+0x18add7): undefined reference to `wiphy_new'
drivers/built-in.o: In function `ar6k_cfg80211_init':
(.text+0x18ae48): undefined reference to `wiphy_register'
drivers/built-in.o: In function `ar6k_cfg80211_tkip_micerr_event':
(.text+0x18ae95): undefined reference to `cfg80211_michael_mic_failure'
drivers/built-in.o: In function `ar6k_cfg80211_scan_node':
(.text+0x18afb5): undefined reference to `__ieee80211_get_channel'
drivers/built-in.o: In function `ar6k_cfg80211_scan_node':
(.text+0x18afd2): undefined reference to `cfg80211_inform_bss_frame'
drivers/built-in.o: In function `ar6k_cfg80211_disconnect_event':
(.text+0x18b046): undefined reference to `cfg80211_ibss_joined'
drivers/built-in.o: In function `ar6k_cfg80211_disconnect_event':
(.text+0x18b176): undefined reference to `cfg80211_connect_result'
drivers/built-in.o: In function `ar6k_cfg80211_disconnect_event':
(.text+0x18b190): undefined reference to `cfg80211_disconnected'
drivers/built-in.o: In function `ar6k_cfg80211_connect_event':
(.text+0x18b291): undefined reference to `cfg80211_get_bss'
drivers/built-in.o: In function `ar6k_cfg80211_connect_event':
(.text+0x18b457): undefined reference to `cfg80211_put_bss'
drivers/built-in.o: In function `ar6k_cfg80211_connect_event':
(.text+0x18b4fa): undefined reference to `cfg80211_roamed'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Luis R. Rodriguez <mcgrof@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 24 May 2011 11:35:21 +0000 (13:35 +0200)]
staging: brcm80211: fix for 'multiple definition of wl_msg_level' build err
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>