Arun Raghavan [Mon, 26 Oct 2020 15:45:27 +0000 (11:45 -0400)]
sink, source: Skip filter streams while changing default sink/source
Streams connecting filter devices to their target devices shouldn't move
because of default settings (they are intended to be filtering the
specific device that are attached to).
Fixes: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/1015
Jaroslav Kysela [Wed, 14 Oct 2020 15:16:44 +0000 (17:16 +0200)]
alsa: move the exceptionally large value errors from error to debug level
Almost all reports from users, I have seen in last years, were not valid.
The report is also printed when the system scheduler does not wake
the pulseaudio thread in the right time. Users are not able to distinguish
between slow machine and the real problem.
Move the log level from 'error' to 'debug' for those messages.
The right fix should be to measure the time between the call invocation and
return to determine (and skip) the scheduling problems, but it is another
extra code just to debug things.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Arun Raghavan [Wed, 14 Oct 2020 13:09:53 +0000 (09:09 -0400)]
build-sys: Set the GStreamer RTP backend to disabled by default
Packaging shouldn't be using the automatic setting anyway, and let's
disable by default for one release and mark this as experimental so we
can flush out any corner cases.
Arun Raghavan [Thu, 22 Oct 2020 14:12:03 +0000 (10:12 -0400)]
rtp: gstreamer: Account for rounding errors in RTP timestamp conversion
Since the RTP timestamp is converted to time units and back, a small
error can creep up, which then results in a single frame error in where
we place the buffer in the output memblockq. This results in minor
glitches, so we check for and eliminate the error.
Arun Raghavan [Thu, 22 Oct 2020 14:06:40 +0000 (10:06 -0400)]
rtp: gstreamer: Don't count on buffer DTS for capture time
With GStreamer 1.18, the old behaviour of storing the capture time in
DTS is gone (which is reasonable, since the semantics really don't
match). So instead, we get a capture timestamp when the buffer is being
pushed from udpsrc. This should eventually move into udpsrc, and the
timestamp should come from the cmsg instead of the clock.
We still fallback to the DTS if the meta isn't available, as the meta
might be dropped in older versions of rtpL16pay due to a bug.
Igor V. Kovalenko [Thu, 15 Oct 2020 20:55:17 +0000 (23:55 +0300)]
module-bluez5-discover: avoid use after free on de-init
Hashmap loaded_device_paths contain objects holding keys to entries, and
these objects must be alive while map is emptied.
Reorder freeing this hashmap before destroying device objects to fix
crash on exit.
Igor V. Kovalenko [Thu, 15 Oct 2020 21:24:50 +0000 (00:24 +0300)]
build-sys: meson: adjust path to gsettings-helper runing from build tree
Arun Raghavan [Tue, 20 Oct 2020 18:36:20 +0000 (14:36 -0400)]
build-sys: meson: Add libm dep to raop module
This is required for using pow().
Igor V. Kovalenko [Mon, 19 Oct 2020 05:29:43 +0000 (08:29 +0300)]
device-port: fire port available changed hook after streams are moved
If port becomes unavailable then PA_CORE_HOOK_PORT_AVAILABLE_CHANGED
callbacks may eventually destroy related source or sink object. Call
this hook after stream is moved to prevent crash reading from freed
memory.
Fixes: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/1008
Arun Raghavan [Wed, 14 Oct 2020 01:03:30 +0000 (21:03 -0400)]
Revert "alsa-mixer: support up to 8 channels per mixer element"
This reverts commit
e0ab9fa4a478a79fac5fa25a957daff4947d5133.
The change broke some Xonar cards, and we probably don't want to hold up
the 14.0 release for this.
Fixes: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/1009
Tanu Kaskinen [Tue, 13 Oct 2020 14:14:00 +0000 (17:14 +0300)]
ci: Fix comment
The UBUNTU_DEBS variable has been replaced by FDO_DISTRIBUTION_PACKAGES.
Igor V. Kovalenko [Tue, 13 Oct 2020 06:36:50 +0000 (09:36 +0300)]
module-stream-restore: check if dbus entry exists in dbus_entries map before creating it
If write_entry fails to store new entry in database, next time we can try creating new entry again.
With DBUS enabled this will create another dbus entry for same name leading to crash inserting duplicate into dbus_entries map.
Fix this by checking if dbus entry exists in dbus_entries map before creating it.
Fixes: #974
Igor V. Kovalenko [Tue, 13 Oct 2020 06:50:31 +0000 (09:50 +0300)]
module-stream-restore: log error writing volume/mute/device entry to database
Jaroslav Kysela [Mon, 4 May 2020 11:04:28 +0000 (13:04 +0200)]
alsa-mixer: support up to 8 channels per mixer element
We have at least one USB hardware which supports the 8
channels in one mixer element:
https://github.com/alsa-project/alsa-ucm-conf/pull/25
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Tanu Kaskinen [Tue, 13 Oct 2020 10:22:11 +0000 (13:22 +0300)]
alsa-mixer: Document the intended-roles mapping option
Jaroslav Kysela [Sun, 4 Oct 2020 19:35:52 +0000 (21:35 +0200)]
alsa: fix type for legacy hdmi devices
Although the hdmi-output is in well_known_descriptions[] table,
the hdmi device names are indexed (hdmi-output-0), thus there
is no match to assign the proper type automatically.
This patch puts the correct hdmi type to all relevant hdmi
configuration files.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Fri, 18 Sep 2020 14:32:00 +0000 (16:32 +0200)]
alsa: fix analog-input-microphone-headset device type
From: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Fri, 18 Sep 2020 14:30:02 +0000 (16:30 +0200)]
alsa: mixer - reorder the type field in path parser
The items array is assigned later and the order of fields is important.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Michael Pivonka [Sat, 26 Sep 2020 16:39:37 +0000 (12:39 -0400)]
alsa-mixer: Add Razer Kraken Tournament Edition USB headset
Ralph Seichter [Thu, 10 Sep 2020 18:25:05 +0000 (20:25 +0200)]
macos: Add missing import statement
Add missing import of util.h. This fixes a build failure with the
Xcode 12 command line tools which manifests as follows:
error: implicit declaration of function 'pa_thread_make_realtime'
is invalid in C99 [-Werror,-Wimplicit-function-declaration]
Ref https://trac.macports.org/ticket/61107
Sanchayan Maity [Mon, 7 Sep 2020 13:05:40 +0000 (18:35 +0530)]
rtp: Fix sending of small packets
The current implementation for RTP send isn't optimised for sending MTU
bytes of data like rtp-native. For eg. if MTU is 1280 bytes and we have
to send 1276 bytes, two packets are send out one of 1268 bytes and other
of 8 bytes. Sending out a packet of 8 bytes has a significant overhead
and we should be sending MTU bytes of data.
Fix this by accumulating MTU bytes of data and sending data only on
accumulation of MTU worth of data.
Juliano de Souza Camargo [Sat, 19 Sep 2020 03:39:58 +0000 (04:39 +0100)]
Update Portuguese translation
Arun Raghavan [Mon, 21 Sep 2020 00:11:52 +0000 (20:11 -0400)]
build-sys: Bump gettext dependency
Needed for distcheck to work with a checked-in pulseaudio.pot. Not
updating to the very latest (0.21) to not force the dependency bump to
something "too new" on distros.
Arun Raghavan [Sun, 20 Sep 2020 23:02:56 +0000 (19:02 -0400)]
build-sys: Add doxygen/meson.build to distfiles
Arun Raghavan [Sun, 20 Sep 2020 22:43:05 +0000 (18:43 -0400)]
build-sys: Bump soversions
libpulse gets a full API bump due to the addition of availability
groups, and libpulse-mainloop-glib gets a minor bump for implementation
change.
Jaroslav Kysela [Sun, 7 Jun 2020 16:25:41 +0000 (18:25 +0200)]
ucm: add possibility to skip the UCM card completely (Linked)
We have a requirement to "hide" some hardware drivers, because
other (main) UCM configuration will refer them.
This patch use special error codes to notify the upper layers
to skip the module loading.
BugLink: https://github.com/alsa-project/alsa-ucm-conf/issues/30
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Rafael Fontenelle [Sat, 12 Sep 2020 15:24:11 +0000 (12:24 -0300)]
Update Brazilian Portuguese translation
Tanu Kaskinen [Fri, 11 Sep 2020 08:13:02 +0000 (11:13 +0300)]
man: client.conf: Explain that autospawn=no doesn't disable systemd autostarting
Milo Casagrande [Mon, 7 Sep 2020 08:56:16 +0000 (08:56 +0000)]
Translated using Weblate (Italian)
Currently translated at 100.0% (533 of 533 strings)
Translation: pulseaudio/pulseaudio
Translate-URL: https://translate.fedoraproject.org/projects/pulseaudio/pulseaudio/it/
Göran Uddeborg [Thu, 13 Aug 2020 19:24:58 +0000 (19:24 +0000)]
Translated using Weblate (Swedish)
Currently translated at 100.0% (534 of 534 strings)
Translation: pulseaudio/pulseaudio
Translate-URL: https://translate.fedoraproject.org/projects/pulseaudio/pulseaudio/sv/
Arun Raghavan [Tue, 11 Aug 2020 04:46:56 +0000 (00:46 -0400)]
alsa-mixer: Add an explicit profile-set for Audigy devices
These lost analog-mono support when we made that a fallback profile, as
the stereo-fallback would be picked up as the only input profile, and
that does not work in duplex mode.
Fixes: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/750
Tom Yan [Sun, 16 Aug 2020 22:16:23 +0000 (22:16 +0000)]
man: mention that exit-idle-time is complied if the user is lingering
Tom Yan [Sun, 16 Aug 2020 20:16:01 +0000 (20:16 +0000)]
main, core: check idle after loading conf
pa_core_check_idle() uses pa_core.exit_idle_time, which is set after the
pa_core_new() call, so pa_core_check_idle() needs to be called later.
This patch preserves the fact that core state is set to PA_CORE_RUNNING
after checking idle (now in main). It doesn't seem to matter anyway and
main(pa_core_new(state:PA_CORE_STARTUP)->...->state:PA_CORE_RUNNING)
seems right as well.
itsthem [Fri, 28 Aug 2020 13:15:50 +0000 (13:15 +0000)]
pulsecore: Replace gendered pronouns with gender neutral ones
Felix Yan [Fri, 14 Aug 2020 14:13:32 +0000 (14:13 +0000)]
shell-completion: zsh: Correct a typo
Tanu Kaskinen [Thu, 13 Aug 2020 19:01:18 +0000 (22:01 +0300)]
i18n: Update pulseaudio.pot
Balázs Meskó [Mon, 20 Jul 2020 14:15:48 +0000 (14:15 +0000)]
Translated using Weblate (Hungarian)
Currently translated at 100.0% (526 of 526 strings)
Translation: pulseaudio/pulseaudio
Translate-URL: https://translate.fedoraproject.org/projects/pulseaudio/pulseaudio/hu/
Milo Ivir [Tue, 14 Jul 2020 18:17:36 +0000 (18:17 +0000)]
Translated using Weblate (Croatian)
Currently translated at 100.0% (531 of 531 strings)
Translation: pulseaudio/pulseaudio
Translate-URL: https://translate.fedoraproject.org/projects/pulseaudio/pulseaudio/hr/
Geert Warrink [Fri, 10 Jul 2020 19:00:45 +0000 (19:00 +0000)]
Translated using Weblate (Dutch)
Currently translated at 85.8% (426 of 496 strings)
Translation: pulseaudio/pulseaudio
Translate-URL: https://translate.fedoraproject.org/projects/pulseaudio/pulseaudio/nl/
Tanu Kaskinen [Mon, 10 Aug 2020 17:56:43 +0000 (20:56 +0300)]
alsa-mixer: Fix indentation
Tanu Kaskinen [Wed, 17 Jun 2020 05:40:16 +0000 (08:40 +0300)]
Rename "available group" to "availability group"
"Availability group" is more clear about what the field is about.
Credits to Arun Raghavan for coming up with the better name.
Tanu Kaskinen [Tue, 21 Jul 2020 07:26:43 +0000 (10:26 +0300)]
alsa-mixer: Fix mapping_group_available() logic
There were three bugs:
1) j->state_plugged was set to PA_AVAILABLE_UNKNOWN too early. It must
be set only after we have found that the jack is shared by two ports.
The result of setting it too early was that no jack ever could have
the PA_AVAILABLE_YES status.
2) The inner jack loop iterated through p->jacks instead of p2->jacks,
so the code didn't compare jacks between two ports at all. As a result
all ports were put in the same availability group.
3) The inner jack loop checked j->state_plugged instead of
j2->state_plugged. The result was that the speaker port, which uses the
Headphone jack to toggle between unknown and unavailable, was put in the
same group with the headphone port.
Tanu Kaskinen [Wed, 17 Jun 2020 05:14:18 +0000 (08:14 +0300)]
Improve the port available_group and type documentation
Tanu Kaskinen [Mon, 10 Aug 2020 16:47:45 +0000 (19:47 +0300)]
meson: Add doxygen target
The documentation can be generated with "ninja -C build doxygen". The
output will go to "doxygen/html" under the build directory.
Tanu Kaskinen [Mon, 10 Aug 2020 16:38:07 +0000 (19:38 +0300)]
build-sys: Configure doxygen.conf.in a bit differently
This change prepares for adding a doxygen target to the Meson build
system. The DOXYGEN_OUTPUT_DIRECTORY substitution variable is needed so
that the output will go to the build directory. I also replaced @srcdir@
with @top_srcdir@. I think it looks cleaner, since the ".." parent
directory traversal is avoided. It also happened to make writing the
Meson rules easier.
Sanchayan Maity [Tue, 28 Jul 2020 08:41:05 +0000 (14:11 +0530)]
modules: rtp-gstreamer: Fix RTP sound lag
In the current scenario of reading samples from the appsink, it is
observed that we do not actually read all the data available in the
appsink to read. This results in a choppy sound or heard as gaps in
the playback.
The underlying reason for this happening is as follows. Let's say
the appsink new sample callback is called 2-3 times, but, with the
underlying fdsem post machinery when pa_rtp_recv eventually gets
called, there would be those 2-3 samples to read. However, we were
only reading one sample in the current implementation.
Fix this by reading all samples from the appsink in a loop, coalescing
them and then writing to the memchunk.
Fixes: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/889
Signed-off-by: Sanchayan Maity <sanchayan@asymptotic.io>
Kai-Heng Feng [Thu, 6 Aug 2020 09:17:27 +0000 (17:17 +0800)]
module-alsa-card: Set a minimum profile priority if it's not set
If the profile is generated from UCM, the priority won't be set so it
stays as 0.
Assume a card has two available profiles, when the selected one becomes
unavailable, module-switch-on-port-available's find_best_profile()
should pick the next available one. However, since the priority is 0,
the "off" profile was chosen instead of the available one.
So let's set the priority to 1 to make profile that is available has
higher priority than "off" profile.
Rosen Penev [Thu, 6 Aug 2020 01:32:03 +0000 (18:32 -0700)]
raop-crypto: add missing header
Fixes compilation without deprecated OpenSSL APIs.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Thu, 6 Aug 2020 01:38:19 +0000 (18:38 -0700)]
modules: fix wrong formats under 32-bit
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Jan Alexander Steffens (heftig) [Sun, 2 Aug 2020 15:43:03 +0000 (17:43 +0200)]
build: Make alsadatadir configurable
Pipewire has started shipping copies of PulseAudio's ALSA card profiles.
It would be useful if both projects could share the same profiles and
this patch is a step toward that.
Jan Alexander Steffens (heftig) [Sun, 9 Aug 2020 01:28:52 +0000 (03:28 +0200)]
meson: Add missing thread_dep to atomic-test
Otherwise it won't link.
/usr/bin/ld: /tmp/atomic-test.uzrv5D.ltrans0.ltrans.o:
undefined reference to symbol 'pthread_setaffinity_np@@GLIBC_2.3.4'
Tanu Kaskinen [Thu, 6 Aug 2020 11:34:56 +0000 (14:34 +0300)]
gitignore: Ignore hashmap-test
Kai-Heng Feng [Mon, 3 Aug 2020 16:20:02 +0000 (00:20 +0800)]
alsa-mixer: Recognize USB audio jack mixer
UAC v2 and v3 support insertion control (jack detection), and the
created jack mixers have "- Input" suffix and "- Output" suffix for
input jack and output jack, respectively.
Add these jacks so we don't always need to rely on UCM or PulseAudio
profile-set.
Tanu Kaskinen [Tue, 4 Aug 2020 08:38:41 +0000 (11:38 +0300)]
udev: fix too long card name with HyperX Cloud Orbit S
Fixes: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/820
Tanu Kaskinen [Tue, 4 Aug 2020 11:44:38 +0000 (14:44 +0300)]
meson: Build atomic-test
The test was missing from the build system.
Tanu Kaskinen [Tue, 4 Aug 2020 11:42:59 +0000 (14:42 +0300)]
build-sys: Build atomic-test only if pthread_setaffinity_np() is available
The function seems to be essential to the test, so the test has to be
disabled entirely if pthread_setaffinity_np() is not available.
Fixes: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/850
Wim Taymans [Mon, 3 Aug 2020 07:58:39 +0000 (09:58 +0200)]
alsa-util: fix check for digit
Fix the check for a digit by checking if the value is between the
*character* '0' (not *value* 0) and '9'.
Tomasz Kontusz [Sun, 12 Jul 2020 12:53:14 +0000 (14:53 +0200)]
alsa-mixer: add support for Astro A50 gaming headset
Tomasz Kontusz [Wed, 22 Jul 2020 05:45:22 +0000 (07:45 +0200)]
alsa-mixer: add description-key to Mappings and Profiles
Tomasz Kontusz [Mon, 20 Jul 2020 15:55:18 +0000 (17:55 +0200)]
alsa-mixer: Remove unused iec958-passthrough* descriptions
They were unused since
20f1fa17bebe086cb9cff09a5157dc7ca009ba61.
Tomasz Kontusz [Sun, 19 Jul 2020 13:06:55 +0000 (15:06 +0200)]
alsa-mixer: Fix well-known descriptions for steelseries game/chat outputs
Tanu Kaskinen [Wed, 22 Jul 2020 10:28:47 +0000 (13:28 +0300)]
device-port: send sink and source change events when availability changes
The lack of change events caused GUIs to not update the port status.
Related bug report:
https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/941
Eero Nurkkala [Tue, 21 Jul 2020 08:22:39 +0000 (11:22 +0300)]
tests: cpu-remap-test.c: fix memory leaks
When compiled with ASAN: -O1 -fsanitize=address -fno-omit-frame-pointer,
the following issues are seen:
==17217==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7fceba414b40 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xdeb40)
#1 0x7fceb9b3eac9 in pa_xmalloc pulse/xmalloc.c:63
#2 0x7fceb9b3ed22 in pa_xmemdup pulse/xmalloc.c:94
#3 0x7fceb9e1eed5 in _pa_xnewdup_internal pulse/xmalloc.h:86
#4 0x7fceb9e1eed5 in init_remap_c pulsecore/remap.c:580
#5 0x7fceb9e1efe5 in pa_init_remap_func pulsecore/remap.c:608
#6 0x5574e72422b7 in remap_init2_test_channels tests/cpu-remap-test.c:303
#7 0x5574e7242420 in rearrange_special_test tests/cpu-remap-test.c:345
#8 0x5574e7245ce5 in srunner_run (/home/eenurkka/pulse/pulseaudio/src/.libs/cpu-remap-test+0x9ce5)
...
SUMMARY: AddressSanitizer: 192 byte(s) leaked in 6 allocation(s).
Fix those issues by freeing the allocated resources properly.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Eero Nurkkala [Tue, 21 Jul 2020 08:13:01 +0000 (11:13 +0300)]
tests: hashmap-test.c: fix memory leak
When compiled with ASAN: -O1 -fsanitize=address -fno-omit-frame-pointer,
the following issue is seen:
==14272==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 1072 byte(s) in 1 object(s) allocated from:
#0 0x7f0180966d28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
#1 0x7f018039f043 in pa_xmalloc0 pulse/xmalloc.c:74
#2 0x7f01803c5cc8 in pa_hashmap_new_full pulsecore/hashmap.c:61
#3 0x7f01803c5df9 in pa_hashmap_new pulsecore/hashmap.c:76
#4 0x556ee75ff7f4 in remove_all_test tests/hashmap-test.c:96
#5 0x556ee7602965 in srunner_run (/home/eenurkka/pulse/pulseaudio/src/.libs/hashmap-test+0x6965)
SUMMARY: AddressSanitizer: 1072 byte(s) leaked in 1 allocation(s).
Fix it by freeing the resource properly.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Tanu Kaskinen [Mon, 13 Jul 2020 09:42:14 +0000 (12:42 +0300)]
remap_neon: use register r12 instead of r7
When the Thumb instructions set is used and frame pointers are enabled
(-fno-omit-frame-pointer), r7 can't be used, because it's used for the
frame pointer. Trying to use r7 caused the compilation to fail.
Thanks to Andre McCurdy for suggesting[1] this fix, all I had to do was to
test that it works. The code builds now, and cpu-remap-test also
succeeds.
[1] https://lists.openembedded.org/g/openembedded-core/message/136786
zhaochengyi [Sat, 18 Jul 2020 08:47:40 +0000 (16:47 +0800)]
pulsecore: Add exception judgment to fix the crash when playing music
When playing music for a period of time, the Shared Memory is
frequently accessed, and occasionally read/write errors occur,
which causes the program to crash
[Current thread is 1 (Thread 0xffff86823010 (LWP 2841))]
(gdb) bt
0 0x0000ffff8702a714 in __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
1 0x0000ffff870188e8 in __GI_abort () at abort.c:79
2 0x0000ffff873b5728 in do_read (p=p@entry=0x3673a170, re=re@entry=0x3673a338) at pulsecore/pstream.c:856
3 0x0000ffff873b7fd8 in do_pstream_read_write (p=0x3673a170) at pulsecore/pstream.c:248
4 0x0000ffff873b8368 in srb_callback (srb=<optimized out>, userdata=0x3673a170) at pulsecore/pstream.c:287
5 0x0000ffff873b8bec in srbchannel_rwloop (sr=0x36766ae0) at pulsecore/srbchannel.c:190
6 0x0000ffff87339c70 in dispatch_pollfds (m=0x36670db0) at pulse/mainloop.c:655
7 0x0000ffff87339c70 in pa_mainloop_dispatch (m=m@entry=0x36670db0) at pulse/mainloop.c:898
8 0x0000ffff8733a01c in pa_mainloop_iterate (m=0x36670db0, block=<optimized out>, retval=0xffffd9683030) at pulse/mainloop.c:929
9 0x0000ffff8733a0d8 in pa_mainloop_run (m=m@entry=0x36670db0, retval=retval@entry=0xffffd9683030) at pulse/mainloop.c:945
10 0x0000000000406894 in main (argc=<optimized out>, argv=<optimized out>) at daemon/main.c:1144
Signed-off-by: zhaochengyi <zhaochengyi@uniontech.com>
Rafael Fontenelle [Sat, 18 Jul 2020 15:12:15 +0000 (15:12 +0000)]
Update Brazilian Portuguese translation
Hui Wang [Thu, 11 Jun 2020 07:49:05 +0000 (15:49 +0800)]
alsa: adjust ucm sink/source priority according to ports priority
On the machines with the ucm used, the different input/output devices
often have different pcm stream, so they often belong to different
sources and sinks, this is greatly different from the design of all
devices connected to a codec (without ucm).
For example, on a machine with ucm2 used:
the internal dmic is on source#0
the external mic is on the source#1
the internal spk is on sink#0
the external headphone is on sink#1
Users expect that after plugging the external device, it will become
the active device automatically. The switch-on-port-available could
make it to be the active_port on its own source/sink, but can't make
source/sink to be default_source/sink since the sources/sinks belong
to the same profile (HiFi usually).
If we adjust the source/sink priority according to ucm ports priority,
the device_port.c could handle the default_source/sink changing then.
Usually we set higher priority for external device than internal
device in the ucm.
In order to bring the lowest side effect on the source/sink priority,
I change the ucm priority to units digit first, then add it to the
original priority.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Tanu Kaskinen [Sat, 11 Jul 2020 12:17:11 +0000 (15:17 +0300)]
build-sys: meson: bump protocol version
This was forgotten in commit
861836c5f72de32ec0debcf8fc3a76c4e2c014e6.
Tanu Kaskinen [Fri, 10 Jul 2020 10:44:52 +0000 (13:44 +0300)]
i18n: Update pulseaudio.pot
Jean-Baptiste Holcroft [Sun, 5 Jul 2020 08:15:44 +0000 (08:15 +0000)]
Translated using Weblate (French)
Currently translated at 100.0% (517 of 517 strings)
Translation: pulseaudio/pulseaudio
Translate-URL: https://translate.fedoraproject.org/projects/pulseaudio/pulseaudio/fr/
Piotr Drąg [Sat, 4 Jul 2020 10:49:56 +0000 (10:49 +0000)]
Translated using Weblate (Polish)
Currently translated at 100.0% (533 of 533 strings)
Translation: pulseaudio/pulseaudio
Translate-URL: https://translate.fedoraproject.org/projects/pulseaudio/pulseaudio/pl/
Oğuz Ersen [Tue, 30 Jun 2020 10:11:58 +0000 (10:11 +0000)]
Translated using Weblate (Turkish)
Currently translated at 100.0% (527 of 527 strings)
Translation: pulseaudio/pulseaudio
Translate-URL: https://translate.fedoraproject.org/projects/pulseaudio/pulseaudio/tr/
Hui Wang [Thu, 9 Jul 2020 02:48:33 +0000 (10:48 +0800)]
alsa: make the unsuspend more robust
We met a weird situation on a couple of Lenovo machines and at least
on one Dell machine. First we open the gnome-sound-setting, then
suspend and resume the system, after the system resume back, the audio
devices change to dummy, the audio doesn't work anymore. And pacmd
list-cards shows no available sound card.
Through debugging I found after resume, the alsa receives POLLERR
events and it will call unsuspend to recover the pcm, but at that
moment, the device nodes in /dev/snd/ is not accessible, so the
snd_pcm_open() fails and the pulseaudio unload the module-alsa-card.
Here I add retry and pa_msleep if snd_pcm_open fails, I tested it on
all machines which have this problem, pa_msleep(25) is ok for most of
them, there is only one machine which needs to call pa_msleep(25)
twice, so for safety reason, I set the max retry times to 4.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Tanu Kaskinen [Mon, 6 Jul 2020 09:39:42 +0000 (12:39 +0300)]
alsa-ucm: Fix NULL pointer handling
get_mixer_device() can return NULL when no mixer device is configured
for the device, so mdev2 can be NULL.
Eero Nurkkala [Wed, 1 Jul 2020 08:20:33 +0000 (11:20 +0300)]
alsa-ucm: disallow null mdev argument into pa_alsa_open_mixer_by_name()
It's possible for mdev to be NULL. In this case, an assert is taken
in pa_alsa_open_mixer_by_name() with debug builds, and a crash with
release builds. However, it's possible to bypass this trouble by taking
the error path if mdev is NULL.
Reported-by: Jarkko Sankala <jarkko.sankala@offcode.fi>
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Baurzhan Muftakhidinov [Tue, 30 Jun 2020 07:42:14 +0000 (07:42 +0000)]
i18n: Add initial Kazakh translation
Tanu Kaskinen [Sat, 6 Jun 2020 10:42:15 +0000 (13:42 +0300)]
man: Explain the limitations of "pulseaudio --check"
Libin Yang [Sat, 13 Jun 2020 10:27:08 +0000 (06:27 -0400)]
device-port: queue CARD CHANGE event before update default sink
In single profile mode (headphone and speaker use different PCMs),
when headphone is plugged in, pa_device_port_set_available() will call
pa_core_update_default_sink/source() before posting
PA_SUBSCRIPTION_EVENT_CARD|PA_SUBSCRIPTION_EVENT_CHANGE to the gnome.
And pa_core_update_default_sink/source() will post
PA_SUBSCRIPTION_EVENT_SERVER | PA_SUBSCRIPTION_EVENT_CHANGE to the gnome.
So the original event sequence is:
1. PA_SUBSCRIPTION_EVENT_SERVER | PA_SUBSCRIPTION_EVENT_CHANGE
2. PA_SUBSCRIPTION_EVENT_CARD | PA_SUBSCRIPTION_EVENT_CHANGE
In gnome-control-center:
When it receives PA_SUBSCRIPTION_EVENT_SERVER, it will call
req_update_server_info () to update the panel;
When it receives PA_SUBSCRIPTION_EVENT_CARD, it will update
the card information, for example, when the headphone is connected,
it will call gtk_list_store_append() to append the headphone.
Let's use an example to clarify the correct sequence.
Assume we plug in headphone. PA will set the default sink to headphone
from speaker, and hope gnome sound setting "Output Deivce" to highlight to
"headphone". PA should send PA_SUBSCRIPTION_EVENT_CARD firstly to notify
gnome-control-center "headphone" is plugged in. And then it sends
PA_SUBSCRIPTION_EVENT_SERVER to trigger sound setting to highlight
to "headphone".
Signed-off-by: Libin Yang <libin.yang@intel.com>
Tanu Kaskinen [Sun, 21 Jun 2020 15:23:14 +0000 (18:23 +0300)]
sink, source: Use the global configuration for the avoid_resampling default
Previously avoid_resampling was always false unless the sink or source
implementation explicitly configured the variable. The null sink doesn't
explicitly configure it, so it didn't switch the sample rate as
expected when avoid_resampling was enabled.
This change means that also sinks that don't support rate switching can
have avoid_resampling set to true, but I think that's fine, because
pa_sink_reconfigure() doesn't try to do anything if the reconfigure()
callback isn't set.
Fixes: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/923
Taahir Ahmed [Sun, 14 Jun 2020 05:57:17 +0000 (22:57 -0700)]
Add a basic test suite for pa_hashmap
I spent a little time working through the implementation of
pa_hashmap, and wrote a test suite while doing so. It tests a few
basic edge cases, like saturating all buckets of the hashtable.
Yuri Chornoivan [Thu, 18 Jun 2020 14:30:28 +0000 (17:30 +0300)]
i18n: Update poulseaudio.pot
Pali Rohár [Thu, 30 Apr 2020 16:40:53 +0000 (18:40 +0200)]
bluetooth: policy: Remove BlueZ 4 related code
Remove what was forgotten in
e81e7a2ca52c232c38b00bdf97dbb36c83a86043 and
493892434a63e0e3e1ef2bd4347c0c21e69c6ba1 commits.
Jan Alexander Steffens (heftig) [Wed, 17 Jun 2020 18:01:15 +0000 (20:01 +0200)]
build-sys: meson: Fix detection of SYS_memfd_create
It's a define resolving to a number, not a function.
Jaroslav Kysela [Fri, 17 Apr 2020 20:00:45 +0000 (22:00 +0200)]
pactl: print device port type and available group
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Fri, 17 Apr 2020 19:06:23 +0000 (21:06 +0200)]
alsa ucm: set device port type
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Fri, 17 Apr 2020 13:34:24 +0000 (15:34 +0200)]
alsa: legacy card - implement device port type parser and assignment
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Fri, 17 Apr 2020 12:38:38 +0000 (14:38 +0200)]
alsa: legacy card - set available_group
Create automatically the groups per paths where
the similar jacks are used.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Wed, 15 Apr 2020 11:27:44 +0000 (13:27 +0200)]
alsa-ucm: set available_group (use jack name)
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Wed, 15 Apr 2020 08:59:27 +0000 (10:59 +0200)]
protocol: describe v34 (available_group, port type)
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Tue, 14 Apr 2020 18:04:00 +0000 (20:04 +0200)]
device-port: add type member
The clients might wanna to know for which purpose is the port.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Tue, 14 Apr 2020 15:42:34 +0000 (17:42 +0200)]
device-port: introduce available_group member
In some cases, the I/O connector functionality can be shared
and we cannot determine the proper purpose automatically.
We just know that something was inserted to the jack.
Introduce a group identifier (a simple string - unique
per group) which helps to determine the proper ports
for the application. The user interface may be used
to set the wanted behaviour.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Wim Taymans [Tue, 16 Jun 2020 10:40:39 +0000 (12:40 +0200)]
modules: fix some small memory leaks
Libin Yang [Mon, 8 Jun 2020 14:34:44 +0000 (10:34 -0400)]
core-subscribe: add PA_SUBSCRIPTION_EVENT_CARD in dump_event
fac_table[] lacks of PA_SUBSCRIPTION_EVENT_CARD item. This will cause
pulseaudio crash when it tries to dump the PA_SUBSCRIPTION_EVENT_CARD
event when DEBUG is defined.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Hui Wang [Fri, 8 May 2020 03:19:48 +0000 (11:19 +0800)]
alsa-mixer: store the ucm_device with the order of their priority
There is some case that multiple ucm devices share an amixer Jack
like "Headphones", "Headset" and "Mic2" share the "Headphone Mic Jack",
When the Jack state is changed, the module-switch-on-port-available
will process them in the order they are in the jack->ucm_devices, and
the last device will decide the final setting.
But usually users put priority for those devices and expect the
final setting is based on the highest priority device if there is no
other policies like manual selection. So here do some change to store
the ucm_devices according to their priority (from low to high).
For example, we have ucm devices definition like below (ucm2):
SectionDevice."Mic2" {
Comment "Headphones Stereo Microphone"
...
Value {
CapturePriority 200
...
}
SectionDevice."Headset" {
Comment "Headset Mono Microphone"
...
Value {
CapturePriority 300
...
}
}
Without this patch, the final setting is based on Mic2, after applying
this patch, the final setting is based on the Headset (with higher
priority than Mic2).
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Tanu Kaskinen [Tue, 26 May 2020 12:45:52 +0000 (15:45 +0300)]
raop-sink: Fix compiler warnings
There were three maybe-uninitialized warnings when building with
Autotools (for some reason I don't see these with Meson):
modules/raop/raop-sink.c: In function ‘thread_func’:
modules/raop/raop-sink.c:543:16: warning: ‘intvl’ may be used uninitialized in this function [-Wmaybe-uninitialized]
if (intvl < now + u->block_usec) {
^
In file included from ./pulsecore/macro.h:270,
from ./pulsecore/cpu-x86.h:25,
from ./pulsecore/cpu.h:23,
from ./pulsecore/core.h:26,
from modules/raop/raop-sink.c:48:
./pulsecore/log.h:129:28: warning: ‘check_timing_count’ may be used uninitialized in this function [-Wmaybe-uninitialized]
#define pa_log_warn(...) pa_log_level_meta(PA_LOG_WARN, __FILE__, __LINE__, __func__, __VA_ARGS__)
^~~~~~~~~~~~~~~~~
modules/raop/raop-sink.c:404:14: note: ‘check_timing_count’ was declared here
uint32_t check_timing_count;
^~~~~~~~~~~~~~~~~~
modules/raop/raop-sink.c:500:27: warning: ‘last_timing’ may be used uninitialized in this function [-Wmaybe-uninitialized]
pa_usec_t since = now - last_timing;
^~~~~
I moved the intvl variable initialization out of the for loop, because
it looked like the variable value is supposed to be remembered between
the iterations. I don't know if the variable declaration (without
initialization) in the beginning of the loop caused the compiler to
touch the variable between iterations, probably not, but I'm pretty sure
that's undefined behaviour.
Other than that maybe-undefined behaviour, these compiler warnings may
be false positives, since the variables are initialized when u->first is
true.
I initialized the three variables in to the same value as what is used
when resetting them when u->first is true. I didn't test these changes,
but they look safe to me.
Hugo Osvaldo Barrera [Tue, 26 May 2020 14:19:58 +0000 (14:19 +0000)]
Delete .travis.yml
Tanu Kaskinen [Tue, 26 May 2020 12:04:59 +0000 (15:04 +0300)]
stream-restore: Forget pre-14.0 stream routing
Prior to commits
f899d5f4669dcd536cc142cee99fe359dd8af3d6 and
f62a49b8cf109c011a9818d2358beb6834e6ec25, GNOME's sound settings
overwrote the routing for all entries in the stream-restore database
when selecting a device. Now we prevent that from happening (see the
aforementioned commits), but the old overwritten settings can still be in
the database after updating to PulseAudio 14.0, and they can cause
problems, as documented here:
https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/832
We can't distinguish between devices set by GNOME's sound settings
and devices set by the user, so this patch discards all old device
settings, even though that is going to cause PulseAudio to forget routing
settings for many users. This is less bad than keeping the incorrect
routing settings in the database, because it's difficult for users to
figure out how to fix the situation when e.g. speaker test tones go to
the internal speakers no matter what device is selected as the default,
whereas old manual configuration can be restored restored by doing the
manual configuration again. Also, it's probably more common to have at
some point changed the default device in GNOME's sound settings than it
is to have any manual per-stream routing settings.
This is disabled by default, because this causes data loss, but
distributions that use GNOME are recommended to enable this with
the --enable-stream-restore-clear-old-devices (Autotools) or
-Dstream-restore-clear-old-devices=true (Meson) build option.
Fixes: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/832
Tanu Kaskinen [Tue, 26 May 2020 11:57:42 +0000 (14:57 +0300)]
stream-restore: Fix a potential crash in pa_namereg_is_valid_name()
pa_namereg_is_valid_name() will hit an assertion if the name string is
NULL. Maybe it would make sense to change pa_namereg_is_valid_name() so
that it would return false on NULL, but I didn't want to change the
function semantics at this time.
e->device and e->card can be NULL even when device_valid and card_valid
are set to true if the database contains bad data.
I ran into this crash while developing new code, I haven't seen the
crash in the wild.
Tanu Kaskinen [Tue, 26 May 2020 11:45:12 +0000 (14:45 +0300)]
stream-restore: Drop the version field from the entry struct
Storing the version in the entry struct is pointless. We should always
write entries using the current version. When we encounter older
versions when reading, those need to be converted to the current version
anyway, because all code that uses the entry struct assumes that the
data is stored according to the current version semantics.
We're currently at the first version of the database entries, so
currently there's no version conversion happening. I have a patch that
will increment the entry version, so this is preparation for that.