drm/edid: pass a timing pointer to is_detailed_timing_descriptor()

Use struct member access instead of direct offsets to avoid a cast.

Use BUILD_BUG_ON() for sanity check.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0b5213383e14f11c6a505b10a7342fb2ff4f2a11.1648477901.git.jani.nikula@intel.com

drm/edid: pass a timing pointer to is_display_descriptor()

Use struct member access instead of direct offsets to avoid lots of
casts all over the place.

Use BUILD_BUG_ON() for sanity check.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ccc54b45ea628874c0290dd64114da6cefff1819.1648477901.git.jani.nikula@intel.com

drm/edid: fix reduced blanking support check

The reduced blanking bit is valid only for CVT, indicated by display
range limits flags 0x04.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5dea5ee24065450716bbc177dd6850d3193dbeec.1648477901.git.jani.nikula@intel.com

drm/edid: don't modify EDID while parsing

We'll want to keep the EDID immutable while parsing. Stop modifying the
EDID because of the quirks.

In theory, this does have userspace implications, but the userspace is
supposed to use the modes exposed via KMS API, not by parsing the EDID
directly.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/45d5cf067eaad49b321ac82836090d9de524374e.1648477901.git.jani.nikula@intel.com

tilcdc: tilcdc_external: fix an incorrect NULL check on list iterator

The bug is here:
if (!encoder) {

The list iterator value 'encoder' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.

To fix the bug, use a new variable 'iter' as the list iterator,
while use the original variable 'encoder' as a dedicated pointer
to point to the found element.

Cc: stable@vger.kernel.org
Fixes: ec9eab097a500 ("drm/tilcdc: Add drm bridge support for attaching drm bridge drivers")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20220327061516.5076-1-xiam0nd.tong@gmail.com

gma500: fix an incorrect NULL check on list iterator

The bug is here:
return crtc;

The list iterator value 'crtc' will *always* be set and non-NULL by
list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element is found.

To fix the bug, return 'crtc' when found, otherwise return NULL.

Cc: stable@vger.kernel.org
fixes: 89c78134cc54d ("gma500: Add Poulsbo support")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220327052028.2013-1-xiam0nd.tong@gmail.com

drm/amdgpu: drop amdgpu_gtt_node

We have the BO pointer in the base structure now as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321132601.2161-6-christian.koenig@amd.com

drm/ttm: rework bulk move handling v5

Instead of providing the bulk move structure for each LRU update set
this as property of the BO. This should avoid costly bulk move rebuilds
with some games under RADV.

v2: some name polishing, add a few more kerneldoc words.
v3: add some lockdep
v4: fix bugs, handle pin/unpin as well
v5: improve kerneldoc

Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321132601.2161-5-christian.koenig@amd.com

drm/ttm: de-inline ttm_bo_pin/unpin

Those functions are going to become more complex, don't inline them any
more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321132601.2161-4-christian.koenig@amd.com

drm/nouveau/kms/nv50-: atom: fix an incorrect NULL check on list iterator

The bug is here:
return encoder;

The list iterator value 'encoder' will *always* be set and non-NULL
by drm_for_each_encoder_mask(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element found.
Otherwise it will bypass some NULL checks and lead to invalid memory
access passing the check.

To fix this bug, just return 'encoder' when found, otherwise return
NULL.

Cc: stable@vger.kernel.org
Fixes: 12885ecbfe62d ("drm/nouveau/kms/nvd9-: Add CRC support")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[Changed commit title]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220327073925.11121-1-xiam0nd.tong@gmail.com

drm/ttm: allow bulk moves for all domains

Not just TT and VRAM.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321132601.2161-3-christian.koenig@amd.com

drm/ttm: add resource iterator v4

Instead of duplicating that at different places add an iterator over all
the resources in a resource manager.

v2: add lockdep annotation and kerneldoc
v3: fix various bugs pointed out by Felix
v4: simplify the code a bit more

Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2)
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321132601.2161-2-christian.koenig@amd.com

drm/ttm: move the LRU into resource handling v4

This way we finally fix the problem that new resource are
not immediately evict-able after allocation.

That has caused numerous problems including OOM on GDS handling
and not being able to use TTM as general resource manager.

v2: stop assuming in ttm_resource_fini that res->bo is still valid.
v3: cleanup kerneldoc, add more lockdep annotation
v4: consistently use res->num_pages

Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321132601.2161-1-christian.koenig@amd.com

drm/sched: Fix htmldoc warning.

Fixes the warning.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220328132532.406572-1-andrey.grodzovsky@amd.com

drm/bridge: anx7625: Set downstream sink into normal status

As downstream sink was set into standby mode while bridge disabled,
this patch used for setting downstream sink into normal status
while enable bridge.

Signed-off-by: Xin Ji <xji@analogixsemi.com>
Reviewed-by: Pin-Yen Lin <treapking@chromium.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322080213.1487134-1-xji@analogixsemi.com

drm: omapdrm: Do no allocate non-scanout GEMs through DMM/TILER

On devices with DMM, all allocations are done through either DMM or TILER.
DMM/TILER being a limited resource means that such allocations will start
to fail before actual free memory is exhausted. What is even worse is that
with time DMM/TILER space gets fragmented to the point that even if we have
enough free DMM/TILER space and free memory, allocation fails because there
is no big enough free block in DMM/TILER space.

Such failures can be easily observed with OMAP xorg DDX, for example -
starting few GUI applications (so buffers for their windows are allocated)
and then rotating landscape<->portrait while closing and opening new
windows soon results in allocation failures.

Fix that by mapping buffers through DMM/TILER only when really needed,
like, for scanout buffers.

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1642587791-13222-4-git-send-email-ivo.g.dimitrov.75@gmail.com

drm: omapdrm: Support exporting of non-contiguous GEM BOs

Currently code allocates non-scanout BOs from SHMEM and those objects are
accessible to userspace by mmap(). However, on devices with no DMM (like
OMAP3), the same objects are not accessible by kernel drivers that want to
render to them as code refuses to export them. In turn this means that on
devices with no DMM, all buffers must be allocated as scanout, otherwise
only CPU can access them. On those devices, scanout buffers are allocated
from CMA, making those allocations highly unreliable.

Fix that by implementing functionality to export SHMEM backed buffers on
devices with no DMM. This makes CMA memory only being used when needed,
instead for every buffer that has to be off-CPU rendered.

Tested on Motorola Droid4 and Nokia N900

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1642587791-13222-3-git-send-email-ivo.g.dimitrov.75@gmail.com

drm: omapdrm: simplify omap_gem_pin

Move tiler related code to its own function.

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1642587791-13222-2-git-send-email-ivo.g.dimitrov.75@gmail.com

drm/qxl: fix qxl can't use in arm64

qxl use ioremap to map ram_header and rom, in the arm64 implementation,
the device is mapped as DEVICE_nGnRE, it can not support unaligned
access. and qxl is a virtual device, it can be treated more like RAM
than actual MMIO registers. use ioremap_wc() replace it.

Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Acked-by: Christian König <christian.koenig@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220324104928.2959545-1-liucong2@kylinos.cn
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: Remove restriction of non-zero blob_flags

With native userspace drivers in guest, a lot of GEM objects need to be
neither shared nor mappable.  And in fact making everything mappable
and/or sharable results in unreasonably high fd usage in host VMM.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220219170301.545432-1-robdclark@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes

drm_cvt_mode may return NULL and we should check it.

This bug is found by syzkaller:

FAULT_INJECTION stacktrace:
[  168.567394] FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 1
[  168.567403] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1
[  168.567406] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[  168.567408] Call trace:
[  168.567414]  dump_backtrace+0x0/0x310
[  168.567418]  show_stack+0x28/0x38
[  168.567423]  dump_stack+0xec/0x15c
[  168.567427]  should_fail+0x3ac/0x3d0
[  168.567437]  __should_failslab+0xb8/0x120
[  168.567441]  should_failslab+0x28/0xc0
[  168.567445]  kmem_cache_alloc_trace+0x50/0x640
[  168.567454]  drm_mode_create+0x40/0x90
[  168.567458]  drm_cvt_mode+0x48/0xc78
[  168.567477]  virtio_gpu_conn_get_modes+0xa8/0x140 [virtio_gpu]
[  168.567485]  drm_helper_probe_single_connector_modes+0x3a4/0xd80
[  168.567492]  drm_mode_getconnector+0x2e0/0xa70
[  168.567496]  drm_ioctl_kernel+0x11c/0x1d8
[  168.567514]  drm_ioctl+0x558/0x6d0
[  168.567522]  do_vfs_ioctl+0x160/0xf30
[  168.567525]  ksys_ioctl+0x98/0xd8
[  168.567530]  __arm64_sys_ioctl+0x50/0xc8
[  168.567536]  el0_svc_common+0xc8/0x320
[  168.567540]  el0_svc_handler+0xf8/0x160
[  168.567544]  el0_svc+0x10/0x218

KASAN stacktrace:
[  168.567561] BUG: KASAN: null-ptr-deref in virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu]
[  168.567565] Read of size 4 at addr 0000000000000054 by task syz/6425
[  168.567566]
[  168.567571] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1
[  168.567573] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[  168.567575] Call trace:
[  168.567578]  dump_backtrace+0x0/0x310
[  168.567582]  show_stack+0x28/0x38
[  168.567586]  dump_stack+0xec/0x15c
[  168.567591]  kasan_report+0x244/0x2f0
[  168.567594]  __asan_load4+0x58/0xb0
[  168.567607]  virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu]
[  168.567612]  drm_helper_probe_single_connector_modes+0x3a4/0xd80
[  168.567617]  drm_mode_getconnector+0x2e0/0xa70
[  168.567621]  drm_ioctl_kernel+0x11c/0x1d8
[  168.567624]  drm_ioctl+0x558/0x6d0
[  168.567628]  do_vfs_ioctl+0x160/0xf30
[  168.567632]  ksys_ioctl+0x98/0xd8
[  168.567636]  __arm64_sys_ioctl+0x50/0xc8
[  168.567641]  el0_svc_common+0xc8/0x320
[  168.567645]  el0_svc_handler+0xf8/0x160
[  168.567649]  el0_svc+0x10/0x218

Signed-off-by: Liu Zixian <liuzixian4@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220322091730.1653-1-liuzixian4@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/vc4: hdmi: Support HDMI YUV output

In addition to the RGB444 output, the BCM2711 HDMI controller supports
the YUV444 and YUV422 output formats.

Let's add support for them in the driver, but still use RGB as the
preferred format.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-8-maxime@cerno.tech

drm/vc4: hdmi: Always try to have the highest bpc

Currently we take the max_bpc property as the bpc value and do not try
anything else.

However, what the other drivers seem to be doing is that they would try
with the highest bpc allowed by the max_bpc property and the hardware
capabilities, test if it results in an acceptable configuration, and if
not decrease the bpc and try again.

Let's use the same logic.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-7-maxime@cerno.tech

drm/vc4: hdmi: Take bpp into account for the scrambler

The current code only base its decision for whether the scrambler must be
enabled or not on the pixel clock of the mode, but doesn't take the bits
per color into account.

Let's leverage the new function to compute the clock rate in the
scrambler setup code.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-6-maxime@cerno.tech

drm/vc4: hdmi: Take the sink maximum TMDS clock into account

In the function that validates that the clock isn't too high, we've only
taken our controller limitations into account so far.

However, the sink can have a limit on the maximum TMDS clock it can deal
with too which is exposed through the EDID and the drm_display_info.

Make sure we check it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-5-maxime@cerno.tech

drm/vc4: hdmi: Move clock calculation into its own function

The code to compute our clock rate for a given setup will be called in
multiple places in the next patches, so let's create a separate function
for it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-4-maxime@cerno.tech

drm/vc4: hdmi: Move clock validation to its own function

Our code is doing the same clock rate validation in multiple instances.
Let's create a helper to share the rate validation.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-3-maxime@cerno.tech

drm/vc4: hdmi: Rename pixel_rate variable

The pixel_rate field in the vc4_hdmi_connector_state struct actually
stores the TMDS character rate, let's rename it for consistency.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-2-maxime@cerno.tech

drm/bridge: it6505: Fix build error

If DRM_ITE_IT6505 is y but DRM_DP_HELPER is m, building failed:

drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_i2c_remove':
ite-it6505.c:(.text+0x35c): undefined reference to `drm_dp_aux_unregister'
drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_dpcd_read':
ite-it6505.c:(.text+0x420): undefined reference to `drm_dp_dpcd_read'
drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_get_dpcd':
ite-it6505.c:(.text+0x4a4): undefined reference to `drm_dp_dpcd_read'
drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_dpcd_write':
ite-it6505.c:(.text+0x52c): undefined reference to `drm_dp_dpcd_write'

Select DRM_DP_HELPER for DRM_ITE_IT6505 to fix this.

Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317094724.25972-1-yuehaibing@huawei.com

dma-buf: finally make the dma_resv_list private v2

Drivers should never touch this directly.

v2: drop kerneldoc for now internal handling

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-2-christian.koenig@amd.com

dma-buf: add dma_resv_replace_fences v2

This function allows to replace fences from the shared fence list when
we can gurantee that the operation represented by the original fence has
finished or no accesses to the resources protected by the dma_resv
object any more when the new fence finishes.

Then use this function in the amdkfd code when BOs are unmapped from the
process.

v2: add an example when this is usefull.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-1-christian.koenig@amd.com

RDMA: use dma_resv_wait() instead of extracting the fence

Use dma_resv_wait() instead of extracting the exclusive fence and
waiting on it manually.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Maor Gottlieb <maorg@nvidia.com>
Cc: Gal Pressman <galpress@amazon.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-4-christian.koenig@amd.com

drm/etnaviv: stop using dma_resv_excl_fence v2

We can get the excl fence together with the shared ones as well.

v2: rename the member to fences as well

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: etnaviv@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-5-christian.koenig@amd.com

drm: bridge: it66121: Add audio support

Adding the audio support on the HDMI bridge for I2S only.

Signed-off-by: Nicolas Belin <nbelin@baylibre.com>
Signed-off-by: Andy.Hsieh <Andy.Hsieh@mediatek.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220316135733.173950-4-nbelin@baylibre.com

drm: bridge: it66121: Fix the register page length

Set the register page length or window length to
0x100 according to the documentation.

Fixes: 988156dc2fc9 ("drm: bridge: add it66121 driver")
Signed-off-by: Nicolas Belin <nbelin@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220316135733.173950-3-nbelin@baylibre.com

dt-bindings: display: bridge: it66121: Add audio support

Update the ITE bridge HDMI it66121 bindings in order to
support audio.

Signed-off-by: Nicolas Belin <nbelin@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220316135733.173950-2-nbelin@baylibre.com

drm/gma500: Add crtc prefix to vblank functions

These functions operate on a crtc and should be prefixed properly.

Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322131742.11566-7-patrik.r.jakobsson@gmail.com

drm/gma500: Declare a few functions static

These functions are not used outside of their file scope so can be
declared as static.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322131742.11566-6-patrik.r.jakobsson@gmail.com

drm/gma500: Free the correct connector allocation

The allocation is made for the gma_connector object so we must use the
same address when free()ing the object.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322131742.11566-5-patrik.r.jakobsson@gmail.com

drm/gma500: gma500 don't register non-hotpluggable connectors

According to docs we should only register connectors that are
hotpluggable. No connectors in gma500 are hotpluggable.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322131742.11566-4-patrik.r.jakobsson@gmail.com

drm/gma500: Make use of the drm connector iterator

This makes sure we're using proper locking when iterating the list of
connectors.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322131742.11566-3-patrik.r.jakobsson@gmail.com

drm/gma500: Uninstall interrupts on driver removal

Reloading the driver revealed that the interrupt handler never got
uninstalled.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322131742.11566-2-patrik.r.jakobsson@gmail.com

drm/gma500: Use managed drmm_mode_config_init()

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322131742.11566-1-patrik.r.jakobsson@gmail.com

drm/tilcdc: Use drm_mode_copy()

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Cc: Jyri Sarha <jyri.sarha@iki.fi>
Cc: Tomi Valkeinen <tomba@kernel.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-17-ville.syrjala@linux.intel.com
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

drm/gma500: Use drm_mode_copy()

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-8-ville.syrjala@linux.intel.com
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>

drm/vmwgfx: Disable command buffers on svga3 without gbobjects

With very limited vram on svga3 it's difficult to handle all the surface
migrations. Without gbobjects, i.e. the ability to store surfaces in
guest mobs, there's no reason to support intermediate svga2 features,
especially because we can fall back to fb traces and svga3 will never
support those in-between features.

On svga3 we wither want to use fb traces or screen targets
(i.e. gbobjects), nothing in between. This fixes presentation on a lot
of fusion/esxi tech previews where the exposed svga3 caps haven't been
finalized yet.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 2cd80dbd3551 ("drm/vmwgfx: Add basic support for SVGA3")
Cc: <stable@vger.kernel.org> # v5.14+
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-5-zack@kde.org

drm/vmwgfx: validate the screen formats

The kms code wasn't validating the modifiers and was letting through
unsupported formats. rgb8 was never properly supported and has no
matching svga screen target format so remove it.
This fixes format/modifier failures in kms_addfb_basic from IGT.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-4-zack@kde.org

drm/vmwgfx: Fix mob cursor allocation race

Writes to SVGA_REG_CURSOR_MOBID did not wait for the buffers to be fully
populated. This sometimes results in the device not being aware of
the buffer when the cursor mob register was written.
Properly wait for the buffer to be fully populated before setting it
as a cursor mob.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 485d98d472d5 ("drm/vmwgfx: Add support for CursorMob and CursorBypass 4")
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-3-zack@kde.org

drm/vmwgfx: Fix an invalid read

vmw_move assumed that buffers to be moved would always be
vmw_buffer_object's but after introduction of new placement for mob
pages that's no longer the case.
The resulting invalid read didn't have any practical consequences
because the memory isn't used unless the object actually is a
vmw_buffer_object.
Fix it by moving the cast to the spot where the results are used.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: f6be23264bba ("drm/vmwgfx: Introduce a new placement for MOB page tables")
Reported-by: Chuck Lever III <chuck.lever@oracle.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-2-zack@kde.org

fbdev: defio: fix the pagelist corruption

Easily hit the below list corruption:
==
list_add corruption. prev->next should be next (ffffffffc0ceb090), but
was ffffec604507edc8. (prev=ffffec604507edc8).
WARNING: CPU: 65 PID: 3959 at lib/list_debug.c:26
__list_add_valid+0x53/0x80
CPU: 65 PID: 3959 Comm: fbdev Tainted: G     U
RIP: 0010:__list_add_valid+0x53/0x80
Call Trace:
 <TASK>
 fb_deferred_io_mkwrite+0xea/0x150
 do_page_mkwrite+0x57/0xc0
 do_wp_page+0x278/0x2f0
 __handle_mm_fault+0xdc2/0x1590
 handle_mm_fault+0xdd/0x2c0
 do_user_addr_fault+0x1d3/0x650
 exc_page_fault+0x77/0x180
 ? asm_exc_page_fault+0x8/0x30
 asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x7fd98fc8fad1
==

Figure out the race happens when one process is adding &page->lru into
the pagelist tail in fb_deferred_io_mkwrite(), another process is
re-initializing the same &page->lru in fb_deferred_io_fault(), which is
not protected by the lock.

This fix is to init all the page lists one time during initialization,
it not only fixes the list corruption, but also avoids INIT_LIST_HEAD()
redundantly.

V2: change "int i" to "unsigned int i" (Geert Uytterhoeven)

Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Fixes: 105a940416fc ("fbdev/defio: Early-out if page is already enlisted")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318005003.51810-1-chuansheng.liu@intel.com

drm/panel-edp: add LQ140M1JW46 edp panel entry

Add panel identification entry for the sharp LQ140M1JW46 eDP panel
with power sequencing delay information.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1647452154-16361-5-git-send-email-quic_sbillaka@quicinc.com

dt-bindings: display/panel: Add Leadtek ltk035c5444t

Add binding for the leadtek ltk035c5444t, which is a 640x480
mipi-dbi over spi / 24-bit RGB panel based on the newvision
NV03052C chipset.

It is found in the Anbernic RG350M mips handheld.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311170240.173846-5-cbranchereau@gmail.com

fbdev: Fix cfb_imageblit() for arbitrary image widths

Commit 0d03011894d2 ("fbdev: Improve performance of cfb_imageblit()")
broke cfb_imageblit() for image widths that are not aligned to 8-bit
boundaries. Fix this by handling the trailing pixels on each line
separately. The performance improvements in the original commit do not
regress by this change.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 0d03011894d2 ("fbdev: Improve performance of cfb_imageblit()")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220313192952.12058-3-tzimmermann@suse.de

fbdev: Fix sys_imageblit() for arbitrary image widths

Commit 6f29e04938bf ("fbdev: Improve performance of sys_imageblit()")
broke sys_imageblit() for image width that are not aligned to 8-bit
boundaries. Fix this by handling the trailing pixels on each line
separately. The performance improvements in the original commit do not
regress by this change.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 6f29e04938bf ("fbdev: Improve performance of sys_imageblit()")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220313192952.12058-2-tzimmermann@suse.de

drm/gma500: Cosmetic cleanup of irq code

Use the gma_ prefix instead of psb_ since the code is common for all
chips. Various coding style fixes. Removal of unused code. Removal of
duplicate function declarations.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317092555.17882-4-patrik.r.jakobsson@gmail.com

drm/gma500: Don't store crtc_funcs in psb_ops

The drm_crtc_funcs are all generic and no chip specific functions are
necessary. We can therefore directly put gma_crtc_funcs into the
drm_crtc.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317092555.17882-3-patrik.r.jakobsson@gmail.com

drm/gma500: Move gma_intel_crtc_funcs into gma_display.c

All functions live in gma_display.c already so move the vtable. Also
shorten the name to gma_crtc_funcs.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317092555.17882-2-patrik.r.jakobsson@gmail.com

drm/gma500: Remove unused declarations and other cruft

Most of these are old leftovers from one of the driver merges. This is
all dead code.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317092555.17882-1-patrik.r.jakobsson@gmail.com

drm/vc4: add tracepoints for CL submissions

Trace submit_cl_ioctl and related IRQs for CL submission and bin/render
jobs execution. It might be helpful to get a rendering timeline and
track job throttling.

Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201212651.zhltjmaokisffq3x@mail.igalia.com

drm/ssd130x: Reduce temporary buffer sizes

ssd130x_clear_screen() allocates a temporary buffer sized to hold one
byte per pixel, while it only needs to hold one bit per pixel.

ssd130x_fb_blit_rect() allocates a temporary buffer sized to hold one
byte per pixel for the whole frame buffer, while it only needs to hold
one bit per pixel for the part that is to be updated.
Pass dst_pitch to drm_fb_xrgb8888_to_mono(), as we have already
calculated it anyway.

Fixes: a61732e808672cfa ("drm: Add driver for Solomon SSD130x OLED displays")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317081830.1211400-5-geert@linux-m68k.org

drm/ssd130x: Fix rectangle updates

The rectangle update functions ssd130x_fb_blit_rect() and
ssd130x_update_rect() do not behave correctly when x1 != 0 or y1 !=
0, or when y1 or y2 are not aligned to display page boundaries.
E.g. when used as a text console, only the first line of text is shown
on the display.

  1. The buffer passed by ssd130x_fb_blit_rect() points to the first
     byte of monochrome bitmap data, and thus has its origin at (x1,
     y1), while ssd130x_update_rect() assumes it is at (0, 0).
     Fix ssd130x_update_rect() by changing the vertical and horizontal
     loop ranges, and adding the offsets only when needed.

  2. In ssd130x_fb_blit_rect(), align y1 and y2 to the display page
     boundaries before doing the color conversion, so the full page
     is converted and updated.
     Remove the correction for an unaligned y1 from
     ssd130x_update_rect(), and add a check to make sure y1 is aligned.

Fixes: a61732e808672cfa ("drm: Add driver for Solomon SSD130x OLED displays")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317081830.1211400-4-geert@linux-m68k.org

drm/format-helper: Fix XRGB888 to monochrome conversion

The conversion functions drm_fb_xrgb8888_to_mono() and
drm_fb_gray8_to_mono_line() do not behave correctly when the
horizontal boundaries of the clip rectangle are not multiples of 8:
  a. When x1 % 8 != 0, the calculated pitch is not correct,
  b. When x2 % 8 != 0, the pixel data for the last byte is wrong.

Simplify the code and fix (a) by:
  1. Removing start_offset, and always storing the first pixel in the
     first bit of the monochrome destination buffer.
     Drivers that require the first pixel in a byte to be located at an
     x-coordinate that is a multiple of 8 can always align the clip
     rectangle before calling drm_fb_xrgb8888_to_mono().
     Note that:
       - The ssd130x driver does not need the alignment, as the
 monochrome buffer is a temporary format,
       - The repaper driver always updates the full screen, so the clip
 rectangle is always aligned.
  2. Passing the number of pixels to drm_fb_gray8_to_mono_line(),
     instead of the number of bytes, and the number of pixels in the
     last byte.

Fix (b) by explicitly setting the target bit, instead of always setting
bit 7 and shifting the value in each loop iteration.

Remove the bogus pitch check, which operates on bytes instead of pixels,
and triggers when e.g. flashing the cursor on a text console with a font
that is 8 pixels wide.

Drop the confusing comment about scanlines, as a pitch in bytes always
contains a multiple of 8 pixels.

While at it, use the drm_rect_height() helper instead of open-coding the
same operation.

Update the comments accordingly.

Fixes: bcf8b616deb87941 ("drm/format-helper: Add drm_fb_xrgb8888_to_mono_reversed()")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317081830.1211400-3-geert@linux-m68k.org

drm/format-helper: Rename drm_fb_xrgb8888_to_mono_reversed()

There is no "reversed" handling in drm_fb_xrgb8888_to_mono_reversed():
the function just converts from color to grayscale, and reduces the
number of grayscale levels from 256 to 2 (i.e. brightness 0-127 is
mapped to 0, 128-255 to 1).  All "reversed" handling is done in the
repaper driver, where this function originated.

Hence make this clear by renaming drm_fb_xrgb8888_to_mono_reversed() to
drm_fb_xrgb8888_to_mono(), and documenting the black/white pixel
mapping.

Fixes: bcf8b616deb87941 ("drm/format-helper: Add drm_fb_xrgb8888_to_mono_reversed()")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317081830.1211400-2-geert@linux-m68k.org

drm/doc: Clarify what ioctls can be used on render nodes

The documentation for render nodes indicates that only "PRIME-related"
ioctls are valid on render nodes, but the documentation does not clarify
what that means.  If the reader is not familiar with PRIME, they may
beleive this to be only the ioctls with "PRIME" in the name and not other
ioctls such as set of syncobj ioctls.  Clarify the situation for the
reader by referencing where the reader will find a current list of valid
ioctls.

Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1646667156-16366-1-git-send-email-quic_jhugo@quicinc.com

drm/nouveau: Fix spelling mistake "endianess" -> "endianness"

There is a spelling mistake in a nvdev_error error message. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315221929.2959700-1-colin.i.king@gmail.com

drm/gma500: Move GTT memory-range setup into helper

Move the setup code for GTT/GATT memory ranges into a new helper and
call the function from psb_gtt_init() and psb_gtt_resume(). Removes
code duplication.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-13-tzimmermann@suse.de

drm/gma500: Move GTT enable and disable code into helpers

Move the code for enabling and disabling the GTT into helpers and call
the functions in psb_gtt_init(), psb_gtt_fini() and psb_gtt_resume().
Removes code duplication.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-12-tzimmermann@suse.de

drm/gma500: Move GEM memory management functions to gem.c

Move GEM functions from gtt.c to gem.c. Adapt some names. No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-11-tzimmermann@suse.de

drm/gma500: Inline psb_gtt_restore()

Inline psb_gtt_restore() into its only caller in power.c.

Perform the GTT restoration in psb_gem_mm_resume(). The restoration
step is part of GEM anyway and will be moved over at some point.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-10-tzimmermann@suse.de

drm/gma500: Split GTT init/resume/fini into GTT and GEM functions

The GTT init, fini and resume functions contain both, GTT and GEM,
code. Split each into a separate GTT and a GEM function. The GEM
code is responsible for mmap_mutex and the stolen memory area. The
rest of the functionality is left in GTT functions.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-9-tzimmermann@suse.de

drm/gma500: Cleanup GTT uninit and error handling

Replace psb_gtt_takedown() with finalizer function that is only called
for unloading the driver. Use roll-back pattern for error handling in
psb_gtt_init() and _resume(). Also fixes a bug where vmap_addr was never
unmapped.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-8-tzimmermann@suse.de

drm/gma500: Move GTT resume logic out of psb_gtt_init()

The current implementation of psb_gtt_init() also does resume
handling. Move the resume code into its own helper.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-7-tzimmermann@suse.de

drm/gma500: Move GTT setup and restoration into helper funtions

The GTT init and restore functions contain logic to populate the
GTT entries. Move the code into helper functions.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-6-tzimmermann@suse.de

drm/gma500: Remove struct psb_gtt.sem sempahore

The semaphore at struct psb_mmu_driver.sem protects access to the MMU
fields. Additional locking with struct psb_gtt.sem is unnecessary. Remove
the field and related code.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-5-tzimmermann@suse.de

drm/gma500: Move GTT locking into GTT helpers

Acquire the GTT mutex in psb_gtt_{insert,remove}_pages(). Remove
locking from callers. Also remove the GTT locking around the resume
code. Resume does not run concurrently with other GTT operations.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-4-tzimmermann@suse.de

drm/gma500: Acquire reservation lock for GEM objects

Protect concurrent access to struct psb_gem_object by acquiring
the GEM object's reservation lock; as it's supposed to be. The
use of the GTT mutex can now be moved into GTT code.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-3-tzimmermann@suse.de

drm/gma500: Remove struct psb_gem_object.npage

Calculate the number of pages in the BO's backing storage from
the size. Remove the npage field.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308195222.13471-2-tzimmermann@suse.de

drm/solomon: Make DRM_SSD130X depends on MMU

WARNING: unmet direct dependencies detected for DRM_GEM_SHMEM_HELPER
  Depends on [n]: HAS_IOMEM [=y] && DRM [=m] && MMU [=n]
  Selected by [m]:
  - DRM_SSD130X [=m] && HAS_IOMEM [=y] && DRM [=m]

DRM_GEM_SHMEM_HELPER depends on MMU, DRM_SSD130X should also depends on MMU.

Fixes: a61732e80867 ("drm: Add driver for Solomon SSD130x OLED displays")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220312063437.19160-1-yuehaibing@huawei.com

drm/blend: fix typo in the comment

The documentation for drm_rotation_simplify() uses DRM_MODE_ROTATE_X,
while it's clear the comment should mention DRM_MODE_REFLECT_X
instead. The example passes all flags except the DRM_MODE_REFLECT_X as
supported and expects to eliminate this flag.

Fixes: c2c446ad2943 ("drm: Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ to UAPI")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220316074648.7009-1-dmitry.baryshkov@linaro.org

drm/panel: Use drm_mode_duplicate()

Replace the hand rolled drm_mode_duplicate() with the
real thing.

@is_dup@
@@
drm_mode_duplicate(...)
{ ... }

@depends on !is_dup@
expression dev, oldmode;
identifier newmode;
@@
- newmode = drm_mode_create(dev);
+ newmode = drm_mode_duplicate(dev, oldmode);
  ...
- drm_mode_copy(newmode, oldmode);

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-21-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>

drm/imx: Use drm_mode_duplicate()

Replace the hand rolled drm_mode_duplicate() with the
real thing.

@is_dup@
@@
drm_mode_duplicate(...)
{ ... }

@depends on !is_dup@
expression dev, oldmode;
identifier newmode;
@@
- newmode = drm_mode_create(dev);
+ newmode = drm_mode_duplicate(dev, oldmode);
  ...
- drm_mode_copy(newmode, oldmode);

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-10-ville.syrjala@linux.intel.com
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>

drm/bridge: Use drm_mode_copy()

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-7-ville.syrjala@linux.intel.com
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: Add drm_mode_init()

Add a variant of drm_mode_copy() that explicitly clears out
the list head of the destination mode. Helpful to guarantee
we don't have stack garbage left in there for on-stack modes.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-2-ville.syrjala@linux.intel.com
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>

drm/vmwgfx: Stop using surface dma commands on most configurations

Initial version of guest backed objects in the host had some performance
issues that made using surface-dma's instead of direct copies faster.
Surface dma's force a migration to vram which at best is slow and at
worst is impossible (e.g. on svga3 where there's not enough vram
to migrate fb's to it).

Slowly migrate away from surface dma's to direct copies by limiting
their usage to systems with more than 32MB of vram.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-9-zack@kde.org

drm/vmwgfx: Implement MSI/MSI-X support for IRQs

SVGAv3 deprecates legacy interrupts and adds support for MSI/MSI-X. With
MSI the driver visible side remains largely unchanged but with MSI-X
each interrupt gets delivered on its own vector.

Add support for MSI/MSI-X while preserving the old functionality for
SVGAv2. Code between the SVGAv2 and SVGAv3 is exactly the same, only
the number of available vectors changes, in particular between legacy
and MSI-X interrupts.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220307162412.1183049-1-zack@kde.org

drm/vmwgfx: Initialize drm_mode_fb_cmd2

Transition to drm_mode_fb_cmd2 from drm_mode_fb_cmd left the structure
unitialized. drm_mode_fb_cmd2 adds a few additional members, e.g. flags
and modifiers which were never initialized. Garbage in those members
can cause random failures during the bringup of the fbcon.

Initializing the structure fixes random blank screens after bootup due
to flags/modifiers mismatches during the fbcon bring up.

Fixes: dabdcdc9822a ("drm/vmwgfx: Switch to mode_cmd2")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-7-zack@kde.org

drm/vmwgfx: Allow querying of the SVGA PCI id from the userspace

Mesa3D loaders require knowledge of the devices PCI id. SVGAv2 and v3
have different PCI id's, but the same driver is used to handle them both.
To allow Mesa3D svga driver to be loaded automatically for both SVGAv2
and SVGAv3 make the kernel return the PCI id of the currently running
device.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-6-zack@kde.org

drm/vmwgfx: Fix fencing on SVGAv3

Port of the vmwgfx to SVGAv3 lacked support for fencing. SVGAv3 removed
FIFO's and replaced them with command buffers and extra registers.
The initial version of SVGAv3 lacked support for most advanced features
(e.g. 3D) which made fences unnecessary. That is no longer the case,
especially as 3D support is being turned on.

Switch from FIFO commands and capabilities to command buffers and extra
registers to enable fences on SVGAv3.

Fixes: 2cd80dbd3551 ("drm/vmwgfx: Add basic support for SVGA3")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-5-zack@kde.org

drm/vmwgfx: Print capabilities early during the initialization

Capabilities were logged at the end of initialization so any early errors
would make them not appear in the logs. Which is also when they're needed
the most.
Print the the capabilities right after fetching them, before the init
code starts using them to make sure they always show up in the logs.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-4-zack@kde.org

drm/vmwgfx: Cleanup multimon initialization code

The results of the legacy display unit initialization were being silently
ignored. Unifying the selection of number of display units based
on whether the underlying device supports multimon makes it easier
to add error checking to all paths.

This makes the driver report the errors in ldu initialization paths
and try to recover from them.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-3-zack@kde.org

drm/vmwgfx: Add support for CursorMob and CursorBypass 4

* Add support for CursorMob
* Add support for CursorBypass 4
* Refactor vmw_du_cursor_plane_atomic_update to be kms-helper-atomic
  -- move BO mappings to vmw_du_cursor_plane_prepare_fb
  -- move BO unmappings to vmw_du_cursor_plane_cleanup_fb

Cursor mobs are a new svga feature which enables support for large
cursors, e.g. large accessibility cursor on platforms with vmwgfx. It
also cleans up the cursor code and makes it more uniform with the rest
of modern guest backed objects support.

Signed-off-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-2-zack@kde.org

drm/bridge: analogix_dp: Enable autosuspend

DP AUX transactions can consist of many short operations. There's no
need to power things up/down in short intervals.

I pick an arbitrary 100ms; for the systems I'm testing (Rockchip
RK3399), runtime-PM transitions only take a few microseconds.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301181107.v4.2.I48b18ab197c9b649d376cf8cfd934e59d338f86d@changeid

drm/bridge: analogix_dp: Grab runtime PM reference for DP-AUX

If the display is not enable()d, then we aren't holding a runtime PM
reference here. Thus, it's easy to accidentally cause a hang, if user
space is poking around at /dev/drm_dp_aux0 at the "wrong" time.

Let's get a runtime PM reference, and check that we "see" the panel.
Don't force any panel power-up, etc., because that can be intrusive, and
that's not what other drivers do (see
drivers/gpu/drm/bridge/ti-sn65dsi86.c and
drivers/gpu/drm/bridge/parade-ps8640.c.)

Fixes: 0d97ad03f422 ("drm/bridge: analogix_dp: Remove duplicated code")
Cc: <stable@vger.kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301181107.v4.1.I773a08785666ebb236917b0c8e6c05e3de471e75@changeid

drm/bridge: Add myself as a reviewer for the Parade PS8640 bridge chip

Though the parade bridge chip is a little bit of a black box, I'm at
least interested in hearing about changes to the driver since this
bridge chip is used on some Chromebooks that I'm involved with.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308110615.3.I04f99fbcc14b8c09610b4b18f0696c992a44d2b7@changeid

drm/bridge: Add myself as a reviewer for the TI SN65DSI86 bridge chip

I've spent quite a bit of time poking at this driver and it's used on
several Chromebooks I'm involved with. I'd like to get notified about
patches. Add myself as a reviewer. It's expected that changes will
still be landed through drm-misc as they always have been.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308110615.2.I4485769d5b25a8096508e839b8fea12ce7b836d3@changeid

drm/bridge: Add MAINTAINERS entry for DRM drivers for bridge chip bindings

The bindings for bridge chips should also get the same maintainers
entry so the right people get notified about bindings changes.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308110615.1.I1f1b10daf7361feb6705f789deb680b8d7720de9@changeid

drm/bridge: anx7625: switch to devm_drm_of_get_bridge

The function "drm_of_find_panel_or_bridge" has been deprecated in
favor of "devm_drm_of_get_bridge".

Switch to the new function and reduce boilerplate.

Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221072835.10032-1-jose.exposito89@gmail.com

drm: ssd130x: Always apply segment remap setting

Currently the ssd130x driver only sets the segment remap setting when
the device tree requests it; it however does not clear the setting if
it is not requested. This leads to the setting incorrectly persisting
if the hardware is always on and has no reset GPIO wired. This might
happen when a developer is trying to find the correct settings for an
unknown module, and cause the developer to get confused because the
settings from the device tree are not consistently applied.

Make the driver apply the segment remap setting consistently, setting
the value correctly based on the device tree setting. This also makes
this setting's behavior consistent with the other settings, which are
always applied.

Fixes: a61732e80867 ("drm: Add driver for Solomon SSD130x OLED displays")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308160758.26060-2-wens@kernel.org

drm: ssd130x: Fix COM scan direction register mask

The SSD130x's command to toggle COM scan direction uses bit 3 and only
bit 3 to set the direction of the scanout. The driver has an incorrect
GENMASK(3, 2), causing the setting to be set on bit 2, rendering it
ineffective.

Fix the mask to only bit 3, so that the requested setting is applied
correctly.

Fixes: a61732e80867 ("drm: Add driver for Solomon SSD130x OLED displays")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308160758.26060-1-wens@kernel.org

drm/bridge: ti-sn65dsi86: switch to devm_drm_of_get_bridge

The function "drm_of_find_panel_or_bridge" has been deprecated in
favor of "devm_drm_of_get_bridge".

Switch to the new function and reduce boilerplate.

Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220228183955.25508-1-jose.exposito89@gmail.com