review.tizen.org Git - platform/kernel/linux-starfive.git/log

drm/i915/guc: Fix issues with live_preempt_cancel

Having semaphores results in different behavior when a dependent request
is cancelled. In the case of semaphores the request could be on the HW
and complete successfully while without the request is held in the
driver and the error from the dependent request is propagated. Fix
live_preempt_cancel to take this behavior into account.

Also update live_preempt_cancel to use new function intel_context_ban
rather than intel_context_set_banned.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728024225.2363663-3-John.C.Harrison@Intel.com

drm/i915/guc: Route semaphores to GuC for Gen12+

In GuC submission mode, there is an option to use auto-switch out
semaphores and have GuC auto-switch in a waiting context. This
requires routing the semaphore interrupt to GuC.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728024225.2363663-2-John.C.Harrison@Intel.com

drm/i915/guc: Check for ct enabled while waiting for response

We are seeing error message of "No response for request". Some cases
happened while waiting for response and reset/suspend action was triggered.
In this case, no response is not an error, active requests will be
cancelled.

This patch will handle this condition and change the error message into
debug message.

Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220715211313.143645-1-zhanjun.dong@intel.com

drm/i915/gt: describe the new tlb parameter at i915_vma_resource

TLB cache invalidation can happen on two different situations:

1. synchronously, at __vma_put_pages();
2. asynchronously.

On the first case, TLB cache invalidation happens inside
__vma_put_pages(). So, no need to do it later on.

However, on the second case, the pages will keep in memory
until __i915_vma_evict() is called.

So, we need to store the TLB data at struct i915_vma_resource,
in order to do a TLB cache invalidation before allowing
userspace to re-use the same memory.

So, i915_vma_resource_unbind() has gained a new parameter
in order to store the TLB data at the second case.

Document it.

Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aa55eef7e63b8f3d0f69b525db2dd2eb87e9db6b.1658924372.git.mchehab@kernel.org

drm/i915/gt: Batch TLB invalidations

Invalidate TLB in batches, in order to reduce performance regressions.

Currently, every caller performs a full barrier around a TLB
invalidation, ignoring all other invalidations that may have already
removed their PTEs from the cache. As this is a synchronous operation
and can be quite slow, we cause multiple threads to contend on the TLB
invalidate mutex blocking userspace.

We only need to invalidate the TLB once after replacing our PTE to
ensure that there is no possible continued access to the physical
address before releasing our pages. By tracking a seqno for each full
TLB invalidate we can quickly determine if one has been performed since
rewriting the PTE, and only if necessary trigger one for ourselves.

That helps to reduce the performance regression introduced by TLB
invalidate logic.

[mchehab: rebased to not require moving the code to a separate file]

Cc: stable@vger.kernel.org
Fixes: 7938d61591d3 ("drm/i915: Flush TLBs before releasing backing store")
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Cc: Fei Yang <fei.yang@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4e97ef5deb6739cadaaf40aa45620547e9c4ec06.1658924372.git.mchehab@kernel.org

drm/i915/gt: Skip TLB invalidations once wedged

Skip all further TLB invalidations once the device is wedged and
had been reset, as, on such cases, it can no longer process instructions
on the GPU and the user no longer has access to the TLB's in each engine.

So, an attempt to do a TLB cache invalidation will produce a timeout.

That helps to reduce the performance regression introduced by TLB
invalidate logic.

Cc: stable@vger.kernel.org
Fixes: 7938d61591d3 ("drm/i915: Flush TLBs before releasing backing store")
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Cc: Fei Yang <fei.yang@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5aa86564b9ec5fe7fe605c1dd7de76855401ed73.1658924372.git.mchehab@kernel.org

drm/i915/gt: Invalidate TLB of the OA unit at TLB invalidations

Ensure that the TLB of the OA unit is also invalidated
on gen12 HW, as just invalidating the TLB of an engine is not
enough.

Cc: stable@vger.kernel.org
Fixes: 7938d61591d3 ("drm/i915: Flush TLBs before releasing backing store")
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Cc: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/59724d9f5cf1e93b1620d01b8332ac991555283d.1658924372.git.mchehab@kernel.org

drm/i915/gt: document with_intel_gt_pm_if_awake()

Add a kernel-doc markup to document this new macro.

Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b974905bd0f6b5308b91561cc85eeecd94f1452a.1658924372.git.mchehab@kernel.org

drm/i915/gt: Ignore TLB invalidations on idle engines

Check if the device is powered down prior to any engine activity,
as, on such cases, all the TLBs were already invalidated, so an
explicit TLB invalidation is not needed, thus reducing the
performance regression impact due to it.

This becomes more significant with GuC, as it can only do so when
the connection to the GuC is awake.

Cc: stable@vger.kernel.org
Fixes: 7938d61591d3 ("drm/i915: Flush TLBs before releasing backing store")
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Cc: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/278a57a672edac75683f0818b292e95da583a5fe.1658924372.git.mchehab@kernel.org

drm/i915/ttm: don't leak the ccs state

The kernel only manages the ccs state with lmem-only objects, however
the kernel should still take care not to leak the CCS state from the
previous user.

Fixes: 48760ffe923a ("drm/i915/gt: Clear compress metadata for Flat-ccs objects")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220727164346.282407-1-matthew.auld@intel.com

drm/i915: disable pci resize on 32-bit machine

PCI bar resize only works with 64 bit BAR so disable
this on 32-bit machine and resolve below compilation error:

drivers/gpu/drm/i915/gt/intel_region_lmem.c:94:23: error: result of
comparison of constant 4294967296 with expression of type
'resource_size_t' (aka 'unsigned int') is always false
[-Werror,-Wtautological-constant-out-of-range-compare]
root_res->start > 0x100000000ull)

Fixes: a91d1a17cd341 ("drm/i915: Add support for LMEM PCIe resizable bar")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220727173306.16247-1-nirmoy.das@intel.com

drm/i915: Suppress oom warning for shmemfs object allocation failure

We report object allocation failures to userspace with ENOMEM, yet we
still show the memory warning after failing to shrink device allocated
pages. While this warning is similar to other system page allocation
failures, it is superfluous to the ENOMEM provided directly to
userspace.

v2: Add NOWARN in few more places from where we might return
ENOMEM to userspace.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4936
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Co-developed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220727174023.16766-1-nirmoy.das@intel.com

drm/i915/selftests: Fix comment typo

Fix the double `wait' typo in comment.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220716040520.31676-1-wangborong@cdjrlc.com

drm/i915/gt: Remove unneeded semicolon

The semicolon after the `}' is unneeded.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Removed line mention when pushing]
Link: https://patchwork.freedesktop.org/patch/msgid/20220716184439.72056-1-wangborong@cdjrlc.com

drm/i915/guc: Don't use pr_err when not necessary

A bunch of code was copy/pasted using pr_err as the default way to
report errors. However, drm_err is significantly more useful in
identifying where the error came from. So update the code to use that
instead.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220715004028.2126239-1-John.C.Harrison@Intel.com

drm/i915/guc: support v69 in parallel to v70

This patch re-introduces support for GuC v69 in parallel to v70. As this
is a quick fix, v69 has been re-introduced as the single "fallback" guc
version in case v70 is not available on disk and only for platforms that
are out of force_probe and require the GuC by default. All v69 specific
code has been labeled as such for easy identification, and the same was
done for all v70 functions for which there is a separate v69 version,
to avoid accidentally calling the wrong version via the unlabeled name.

When the fallback mode kicks in, a drm_notice message is printed in
dmesg to inform the user of the required update. The existing
logging of the fetch function has also been updated so that we no
longer complain immediately if we can't find a fw and we only throw an
error if the fetch of both the base and fallback blobs fails.

The plan is to follow this up with a more complex rework to allow for
multiple different GuC versions to be supported at the same time.

v2: reduce the fallback to platform that require it, switch to
firmware_request_nowarn(), improve logs.

Fixes: 2584b3549f4c ("drm/i915/guc: Update to GuC version 70.1.1")
Link: https://lists.freedesktop.org/archives/intel-gfx/2022-July/301640.html
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220718230732.1409641-1-daniele.ceraolospurio@intel.com

drm/i915/gt: Expose per-gt RPS defaults in sysfs

Add the following sysfs files to gt/gtN/.defaults/:
* rps_min_freq_mhz
* rps_max_freq_mhz

v2: Correct gt/gtN/.defaults/* file names in commit message
v3: Remove rps_boost_freq_mhz since it is not consumed by userspace

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cf6e483bf79f871c2c8c74af6005bf6a83a3a1ce.1658192398.git.ashutosh.dixit@intel.com

drm/i915/gt: Create gt/gtN/.defaults/ for per gt sysfs defaults

Create a gt/gtN/.defaults/ directory (similar to
engine/<engine-name>/.defaults/) to expose default parameter values for
each gt in sysfs. This allows userspace to restore default parameter values
after they have changed. The empty 'struct gt_defaults' will be populated
by subsequent patches.

v2: Changed 'struct intel_rps_defaults rps_defaults' to
'struct gt_defaults defaults' (Andi)

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/be7c30d0ae58be9d8d5b8242ba00a1b2825e63ad.1658192398.git.ashutosh.dixit@intel.com

drm/i915/reset: Handle reset timeouts under unrelated kernel hangs

When resuming after hibernate sometimes we see hangs in unrelated kernel
subsystems. These hangs often result in the following i915 trace:

i915 0000:00:02.0: [drm] *ERROR* \
intel_gt_reset_global timed out, cancelling all in-flight rendering

implying our reset task has been starved by the hanging kernel subsystem,
causing us to inappropiately declare the system as wedged beyond recovery.

The trace would be caused by our synchronize_srcu_expedited() taking more
than the allowed 5s due to the unrelated kernel hang. But we neither need
to perform that synchronisation inside the reset watchdog, nor do we need
such a short timeout before declaring the device as unrecoverable.

v2: Restore watchdog timeout to the previous 5 seconds (Ashutosh)

Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/3575
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630043959.5708-1-ashutosh.dixit@intel.com

drm/i915: Add lmem_bar_size modparam

For testing purposes, support forcing the lmem_bar_size through a new
modparam. In CI we only have a limited number of configurations for DG2,
but we still need to be reasonably sure we get a usable device (also
verifying we report the correct values for things like
probed_cpu_visible_size etc) with all the potential lmem_bar sizes that
we might expect see in the wild.

v2: Update commit message and a minor modification.(Matt)

v3: Optimised lmem bar size code and modified code to resize
bar maximum upto lmem_size instead of maximum supported size.(Nirmoy)

v4: Optimised lmem bar size code.(Nirmoy)

Signed-off-by: Priyanka Dandamudi <priyanka.dandamudi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220713130209.2573233-3-priyanka.dandamudi@intel.com

drm/i915: Add support for LMEM PCIe resizable bar

Add support for the local memory PICe resizable bar, so that
local memory can be resized to the maximum size supported by the device,
and mapped correctly to the PCIe memory bar. It is usual that GPU
devices expose only 256MB BARs primarily to be compatible with 32-bit
systems. So, those devices cannot claim larger memory BAR windows size due
to the system BIOS limitation. With this change, it would be possible to
reprogram the windows of the bridge directly above the requesting device
on the same BAR type.

v2:Moved code to gt/intel_region_lmem.c and used only
single underscore for function names.(Jani)

v3: Optimised code.

Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Michael J Ruhl <michael.j.ruhl@intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Priyanka Dandamudi <priyanka.dandamudi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220713130209.2573233-2-priyanka.dandamudi@intel.com

drm/i915: Correct ss -> steering calculation for pre-Xe_HP platforms

Accidental use of a "SLICE" macro where a "SUBSLICE" macro was intended
causes the group ID for steering to be calculated incorrectly on
pre-Xe_HP platforms.

Fixes: 9a92732f040a ("drm/i915/gt: Add general DSS steering iterator to intel_gt_mcr")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220712220513.3451794-1-matthew.d.roper@intel.com

drm/i915/ttm: fix 32b build

Since segment_pages is no longer a compile time constant, it looks the
DIV_ROUND_UP(node->size, segment_pages) breaks the 32b build. Simplest
is just to use the ULL variant, but really we should need not need more
than u32 for the page alignment (also we are limited by that due to the
sg->length type), so also make it all u32.

Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: bc99f1209f19 ("drm/i915/ttm: fix sg_table construction")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220712174050.592550-1-matthew.auld@intel.com

drm/i915/selftests: fix subtraction overflow bug

On some machines hole_end can be small enough to cause subtraction
overflow. On the other side (addr + 2 * min_alignment) can overflow
in case of mock tests. This patch should handle both cases.

Fixes: e1c5f754067b59 ("drm/i915: Avoid overflow in computing pot_hole loop termination")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3674
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624113528.2159210-1-andrzej.hajda@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/gt: Only kick the signal worker if there's been an update

One impact of commit 047a1b877ed4 ("dma-buf & drm/amdgpu: remove
dma_resv workaround") is that it stores many, many more fences. Whereas
adding an exclusive fence used to remove the shared fence list, that
list is now preserved and the write fences included into the list. Not
just a single write fence, but now a write/read fence per context. That
causes us to have to track more fences than before (albeit half of those
are redundant), and we trigger more interrupts for multi-engine
workloads.

As part of reducing the impact from handling more signaling, we observe
we only need to kick the signal worker after adding a fence iff we have
good cause to believe that there is work to be done in processing the
fence i.e. we either need to enable the interrupt or the request is
already complete but we don't know if we saw the interrupt and so need
to check signaling.

References: 047a1b877ed4 ("dma-buf & drm/amdgpu: remove dma_resv workaround")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Karolina Drobnik <karolina.drobnik@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d7b953c7a4ba747c8196a164e2f8c5aef468d048.1657289332.git.karolina.drobnik@intel.com

drm/i915: Bump GT idling delay to 2 jiffies

In monitoring a transcode pipeline that is latency sensitive (it waits
between submitting frames, and each frame requires work on rcs/vcs/vecs
engines), it is found that it took longer than a single jiffy for it to
sustain its workload. Allowing an extra jiffy headroom for the userspace
prevents us from prematurely parking and having to exit powersaving
immediately.

Link: https://gitlab.freedesktop.org/drm/intel/-/issues/6284
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Karolina Drobnik <karolina.drobnik@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e37911ec087a9ce50630d6faf61fa2c0d5f96d44.1657289332.git.karolina.drobnik@intel.com

drm/i915/gem: Look for waitboosting across the whole object prior to individual waits

We employ a "waitboost" heuristic to detect when userspace is stalled
waiting for results from earlier execution. Under latency sensitive work
mixed between the gpu/cpu, the GPU is typically under-utilised and so
RPS sees that low utilisation as a reason to downclock the frequency,
causing longer stalls and lower throughput. The user left waiting for
the results is not impressed.

On applying commit 047a1b877ed4 ("dma-buf & drm/amdgpu: remove dma_resv
workaround") it was observed that deinterlacing h264 on Haswell
performance dropped by 2-5x. The reason being that the natural workload
was not intense enough to trigger RPS (using HW evaluation intervals) to
upclock, and so it was depending on waitboosting for the throughput.

Commit 047a1b877ed4 ("dma-buf & drm/amdgpu: remove dma_resv workaround")
changes the composition of dma-resv from keeping a single write fence +
multiple read fences, to a single array of multiple write and read
fences (a maximum of one pair of write/read fences per context). The
iteration order was also changed implicitly from all-read fences then
the single write fence, to a mix of write fences followed by read
fences. It is that ordering change that belied the fragility of
waitboosting.

Currently, a waitboost is inspected at the point of waiting on an
outstanding fence. If the GPU is backlogged such that we haven't yet
stated the request we need to wait on, we force the GPU to upclock until
the completion of that request. By changing the order in which we waited
upon requests, we ended up waiting on those requests in sequence and as
such we saw that each request was already started and so not a suitable
candidate for waitboosting.

Instead of asking whether to boost each fence in turn, we can look at
whether boosting is required for the dma-resv ensemble prior to waiting
on any fence, making the heuristic more robust to the order in which
fences are stored in the dma-resv.

Reported-by: Thomas Voegtle <tv@lio96.de>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6284
Fixes: 047a1b877ed4 ("dma-buf & drm/amdgpu: remove dma_resv workaround")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Karolina Drobnik <karolina.drobnik@intel.com>
Tested-by: Thomas Voegtle <tv@lio96.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/07e05518d9f6620d20cc1101ec1849203fe973f9.1657289332.git.karolina.drobnik@intel.com

drm/i915/gt: Serialize TLB invalidates with GT resets

Avoid trying to invalidate the TLB in the middle of performing an
engine reset, as this may result in the reset timing out. Currently,
the TLB invalidate is only serialised by its own mutex, forgoing the
uncore lock, but we can take the uncore->lock as well to serialise
the mmio access, thereby serialising with the GDRST.

Tested on a NUC5i7RYB, BIOS RYBDWi35.86A.0380.2019.0517.1530 with
i915 selftest/hangcheck.

Cc: stable@vger.kernel.org # v4.4 and upper
Fixes: 7938d61591d3 ("drm/i915: Flush TLBs before releasing backing store")
Reported-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Tested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e59a7c45dd919a530256b9ac721ac6ea86c0677.1657639152.git.mchehab@kernel.org

drm/i915/gt: Serialize GRDOM access between multiple engine resets

Don't allow two engines to be reset in parallel, as they would both
try to select a reset bit (and send requests to common registers)
and wait on that register, at the same time. Serialize control of
the reset requests/acks using the uncore->lock, which will also ensure
that no other GT state changes at the same time as the actual reset.

Cc: stable@vger.kernel.org # v4.4 and upper
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e0a2d894e77aed7c2e36b0d1abdc7dbac3011729.1657639152.git.mchehab@kernel.org

drm/i915/dg2: Add Wa_15010599737

This workaround may need to be extended to other platforms soon, but for
now it's marked as DG2-specific.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708215804.2889246-1-matthew.d.roper@intel.com

drm/i915/ttm: fix sg_table construction

If we encounter some monster sized local-memory page that exceeds the
maximum sg length (UINT32_MAX), ensure that don't end up with some
misaligned address in the entry that follows, leading to fireworks
later. Also ensure we have some coverage of this in the selftests.

v2(Chris):
- Use round_down consistently to avoid udiv errors
v3(Nirmoy):
- Also update the max_segment in the selftest

Fixes: f701b16d4cc5 ("drm/i915/ttm: add i915_sg_from_buddy_resource")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6379
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220711085859.24198-1-matthew.auld@intel.com

drm/i915/selftests: fix a couple IS_ERR() vs NULL tests

The shmem_pin_map() function doesn't return error pointers, it returns
NULL.

Fixes: be1cb55a07bf ("drm/i915/gt: Keep a no-frills swappable copy of the default context state")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708094104.GL2316@kadam

drm/i915/mtl: Add MeteorLake PCI IDs

Add Meteorlake PCI IDs. Split into M, and P subplatforms.

v2: Update PCI id's
v3: Move id 7d60 under MTL_M(MattR)

Bspec: 55420

Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708000335.2869311-3-radhakrishna.sripada@intel.com

drm/i915/mtl: Add MeteorLake platform info

MTL has Xe_LPD+ display IP (version = 14), MTL graphics IP
(version = 12.70), and Xe_LPM+ media IP (version = 13).

Bspec: 55413
Bspec: 55416
Bspec: 55417
Bspec: 55418
Bspec: 55726
Bspec: 45544
Bspec: 65380

v2: rearrange the fields in pci_info(MattR)

Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
[mattrope: Moved IS_METEORLAKE() higher in header]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708000335.2869311-2-radhakrishna.sripada@intel.com

drm/i915/gt: Add general DSS steering iterator to intel_gt_mcr

Although all DSS belong to a single pool on Xe_HP platforms (i.e.,
they're not organized into slices from a topology point of view), we do
still need to pass 'group' and 'instance' targets when steering register
accesses to a specific instance of a per-DSS multicast register.  The
rules for how to determine group and instance IDs (which previously used
legacy terms "slice" and "subslice") varies by platform.  Some platforms
determine steering by gslice membership, some platforms by cslice
membership, and future platforms may have other rules.

Since looping over each DSS and performing steered unicast register
accesses is a relatively common pattern, let's add a dedicated iteration
macro to handle this (and replace the platform-specific "instdone" loop
we were using previously.  This will avoid the calling code needing to
figure out the details about how to obtain steering IDs for a specific
DSS.

Most of the places where we use this new loop are in the GPU errorstate
code at the moment, but we do have some additional features coming in
the future that will also need to loop over each DSS and steer some
register accesses accordingly.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220701232006.1016135-1-matthew.d.roper@intel.com

i915/perf: Disable OA sseu config param for gfx12.50+

The global sseu config is applicable only to gen11 platforms where
concurrent media, render and OA use cases may cause some subslices to be
turned off and hence lose NOA configuration. Ideally we want to return
ENODEV for non-gen11 platforms, however, this has shipped with gfx12, so
disable only for gfx12.50+.

v2: gfx12 is already shipped with this, disable for gfx12.50+ (Lionel)

v3: (Matt)
- Update commit message and replace "12.5" with "12.50"
- Replace DRM_DEBUG() with driver specific drm_dbg()

Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220707193002.2859653-2-umesh.nerlige.ramappa@intel.com

i915/perf: Replace DRM_DEBUG with driver specific drm_dbg call

DRM_DEBUG is not the right debug call to use in i915 OA, replace it with
driver specific drm_dbg() call (Matt).

Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220707193002.2859653-1-umesh.nerlige.ramappa@intel.com

drm/i915/selftests: Grab the runtime pm in shrink_thp

Since we are not holding a wakeref, shrinking a bound object is not
guaranteed.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6370
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220706154738.235204-1-matthew.auld@intel.com

drm/i915/guc: Asynchronous flush of GuC log regions

Both error-capture and relay-logging mechanism use the GuC
log infrastructure. That means the KMD must send a log flush
complete notification back to GuC after reading the data out.
This call is currently being sent synchronously.
However, synchronous H2Gs cause problems when the system is
backed up. There is no need for this to be synchronous. The
KMD wasn't even looking at the return status from it. So make
it asynchronous and then there is no issue about time outs.

Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607002314.1451656-2-alan.previn.teres.alexis@intel.com

drm/i915: Fix vm use-after-free in vma destruction

In vma destruction, the following race may occur:

Thread 1:        Thread 2:
i915_vma_destroy();

  ...
  list_del_init(vma->vm_link);
  ...
  mutex_unlock(vma->vm->mutex);
  __i915_vm_release();
release_references();

And in release_reference() we dereference vma->vm to get to the
vm gt pointer, leading to a use-after free.

However, __i915_vm_release() grabs the vm->mutex so the vm won't be
destroyed before vma->vm->mutex is released, so extract the gt pointer
under the vm->mutex to avoid the vma->vm dereference in
release_references().

v2: Fix a typo in the commit message (Andi Shyti)

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5944
Fixes: e1a7ab4fca0c ("drm/i915: Remove the vm open count")

Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.con>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220620123659.381772-1-thomas.hellstrom@linux.intel.com

drm/doc/rfc: VM_BIND uapi definition

VM_BIND and related uapi definitions

v2: Reduce the scope to simple Mesa use case.
v3: Expand VM_UNBIND documentation and add
    I915_GEM_VM_BIND/UNBIND_FENCE_VALID
    and I915_GEM_VM_BIND_TLB_FLUSH flags.
v4: Remove I915_GEM_VM_BIND_TLB_FLUSH flag and add additional
    documentation for vm_bind/unbind.
v5: Remove TLB flush requirement on VM_UNBIND.
    Add version support to stage implementation.
v6: Define and use drm_i915_gem_timeline_fence structure for
    all timeline fences.
v7: Rename I915_PARAM_HAS_VM_BIND to I915_PARAM_VM_BIND_VERSION.
    Update documentation on async vm_bind/unbind and versioning.
    Remove redundant vm_bind/unbind FENCE_VALID flag, execbuf3
    batch_count field and I915_EXEC3_SECURE flag.
v8: Remove I915_GEM_VM_BIND_READONLY and minor documentation
    updates.

Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220701003110.24843-4-niranjana.vishwanathapura@intel.com

drm/i915: Update i915 uapi documentation

Add some missing i915 uapi documentation which the new
i915 VM_BIND feature documentation will be refer to.

Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220701003110.24843-3-niranjana.vishwanathapura@intel.com

drm/doc/rfc: VM_BIND feature design document

VM_BIND design document with description of intended use cases.

v2: Reduce the scope to simple Mesa use case.
v3: Expand documentation on dma-resv usage, TLB flushing and
execbuf3.
v4: Remove vm_bind tlb flush request support.
v5: Update TLB flushing documentation.
v6: Update out of order completion documentation.

Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220701003110.24843-2-niranjana.vishwanathapura@intel.com

drm/i915: DG2 and ATS-M device ID updates

Small BAR support has now landed, which allows us to add the PCI IDs
that correspond to add-in card designs of DG2 and ATS-M. There's also
one additional MB-down PCI ID that recently appeared (0x5698) so we add
it too.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220701152231.529511-2-matthew.d.roper@intel.com

drm/i915/pvc: Implement w/a 16016694945

A new PVC-specific workaround has just been added to the BSpec.

BSpec: 64027

Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630201407.16770-1-gustavo.sousa@intel.com

drm/i915: turn on small BAR support

With the uAPI in place we should now have enough in place to ensure a
working system on small BAR configurations.

v2: (Nirmoy & Thomas):
- s/full BAR/Resizable BAR/ which is hopefully more easily
understood by users.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220629174350.384910-13-matthew.auld@intel.com

drm/i915/ttm: disallow CPU fallback mode for ccs pages

Falling back to memcpy/memset shouldn't be allowed if we know we have
CCS state to manage using the blitter. Otherwise we are potentially
leaving the aux CCS state in an unknown state, which smells like an info
leak.

Fixes: 48760ffe923a ("drm/i915/gt: Clear compress metadata for Flat-ccs objects")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220629174350.384910-12-matthew.auld@intel.com

drm/i915/ttm: handle blitter failure on DG2

If the move or clear operation somehow fails, and the memory underneath
is not cleared, like when moving to lmem, then we currently fallback to
memcpy or memset. However with small-BAR systems this fallback might no
longer be possible. For now we use the set_wedged sledgehammer if we
ever encounter such a scenario, and mark the object as borked to plug
any holes where access to the memory underneath can happen. Add some
basic selftests to exercise this.

v2:
  - In the selftests make sure we grab the runtime pm around the reset.
    Also make sure we grab the reset lock before checking if the device
    is wedged, since the wedge might still be in-progress and hence the
    bit might not be set yet.
  - Don't wedge or put the object into an unknown state, if the request
    construction fails (or similar). Just returning an error and
    skipping the fallback should be safe here.
  - Make sure we wedge each gt. (Thomas)
  - Peek at the unknown_state in io_reserve, that way we don't have to
    export or hand roll the fault_wait_for_idle. (Thomas)
  - Add the missing read-side barriers for the unknown_state. (Thomas)
  - Some kernel-doc fixes. (Thomas)
v3:
  - Tweak the ordering of the set_wedged, also add FIXME.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220629174350.384910-11-matthew.auld@intel.com

drm/i915/selftests: ensure we reserve a fence slot

We should always be explicit and allocate a fence slot before adding a
new fence.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220629174350.384910-10-matthew.auld@intel.com

drm/i915/selftests: skip the mman tests for stolen

It's not supported, and just skips later anyway. With small-BAR things
get more complicated since all of stolen is likely not even CPU
accessible, hence not passing I915_BO_ALLOC_GPU_ONLY just results in the
object create failing.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220629174350.384910-9-matthew.auld@intel.com

drm/i915/uapi: tweak error capture on recoverable contexts

A non-recoverable context must be used if the user wants proper error
capture on discrete platforms. In the future the kernel may want to blit
the contents of some objects when later doing the capture stage. Also
extend to newer integrated platforms.

v2(Thomas):
  - Also extend to newer integrated platforms, for capture buffer memory
    allocation purposes.
v3 (Reported-by: kernel test robot <lkp@intel.com>):
  - Fix build on !CONFIG_DRM_I915_CAPTURE_ERROR

Testcase: igt@gem_exec_capture@capture-recoverable
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220629174350.384910-8-matthew.auld@intel.com

drm/i915/error: skip non-mappable pages

Skip capturing any lmem pages that can't be copied using the CPU. This
in now only best effort on platforms that have small BAR.

Testcase: igt@gem-exec-capture@capture-invisible
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220629174350.384910-7-matthew.auld@intel.com

drm/i915/uapi: add NEEDS_CPU_ACCESS hint

If set, force the allocation to be placed in the mappable portion of
I915_MEMORY_CLASS_DEVICE. One big restriction here is that system memory
(i.e I915_MEMORY_CLASS_SYSTEM) must be given as a potential placement for the
object, that way we can always spill the object into system memory if we
can't make space.

Testcase: igt@gem-create@create-ext-cpu-access-sanity-check
Testcase: igt@gem-create@create-ext-cpu-access-big
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220629174350.384910-6-matthew.auld@intel.com

drm/i915/uapi: apply ALLOC_GPU_ONLY by default

On small BAR configurations, when dealing with I915_MEMORY_CLASS_DEVICE
allocations, we assume that by default, all userspace allocations should
be placed in the non-CPU visible portion.  Note that dumb buffers are
not included here, since these are not "GPU accelerated" and likely need
CPU access. We choose to just always set GPU_ONLY, and let the backend
figure out if that should be ignored or not, for example on full BAR
systems.

In a later patch userspace will be able to provide a hint if CPU access
to the buffer is needed.

v2(Thomas)
- Apply GPU_ONLY on all discrete devices, but only if the BO can be
   placed in LMEM. Down in the depths this should be turned into a noop,
   where required, and as an annotation it still make some sense. If we
   apply it regardless of the placements then we end up needing to check
   the placements during exec capture. Also it's slightly inconsistent
   since the NEEDS_CPU_ACCESS can only be applied on objects that can be
   placed in LMEM. The other annoyance would be gem_create_ext vs plain
   gem_create, if we were to always apply GPU_ONLY.

Testcase: igt@gem-create@create-ext-cpu-access-sanity-check
Testcase: igt@gem-create@create-ext-cpu-access-big
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220629174350.384910-5-matthew.auld@intel.com

drm/i915: remove intel_memory_region avail

No longer used.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220629174350.384910-4-matthew.auld@intel.com

drm/i915/uapi: expose the avail tracking

Vulkan would like to have a rough measure of how much device memory can
in theory be allocated. Also add unallocated_cpu_visible_size to track
the visible portion, in case the device is using small BAR. Also tweak
the locking so we nice consistent values for both the mm->avail and the
visible tracking.

v2: tweak the locking slightly so we update the mm->avail and visible
tracking as one atomic operation, such that userspace doesn't get
strange values when sampling the values.

Testcase: igt@i915_query@query-regions-unallocated
Testcase: igt@i915_query@query-regions-sanity-check
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220629174350.384910-3-matthew.auld@intel.com

drm/i915/uapi: add probed_cpu_visible_size

Userspace wants to know the size of CPU visible portion of device
local-memory, and on small BAR devices the probed_size is no longer
enough. In Vulkan, for example, it would like to know the size in bytes
for CPU visible VkMemoryHeap. We already track the io_size for each
region, so plumb that through to the region query.

v2: Drop the ( -1 = unknown ) stuff, which is confusing since nothing
can currently ever return such a value.

Testcase: igt@i915_query@query-regions-sanity-check
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220629174350.384910-2-matthew.auld@intel.com

drm/doc: add rfc section for small BAR uapi

Add an entry for the new uapi needed for small BAR on DG2+.

v2:
  - Some spelling fixes and other small tweaks. (Akeem & Thomas)
  - Rework error capture interactions, including no longer needing
    NEEDS_CPU_ACCESS for objects marked for capture. (Thomas)
  - Add probed_cpu_visible_size. (Lionel)
v3:
  - Drop the vma query for now.
  - Add unallocated_cpu_visible_size as part of the region query.
  - Improve the docs some more, including documenting the expected
    behaviour on older kernels, since this came up in some offline
    discussion.
v4:
  - Various improvements all over. (Tvrtko)

v5:
  - Include newer integrated platforms when applying the non-recoverable
    context and error capture restriction. (Thomas)

Mesa: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16739
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: mesa-dev@lists.freedesktop.org
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Acked-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220629174350.384910-1-matthew.auld@intel.com

drm/i915/guc: ADL-N should use the same GuC FW as ADL-S

The only difference between the ADL S and P GuC FWs is the HWConfig
support. ADL-N does not support HWConfig, so we should use the same
binary as ADL-S, otherwise the GuC might attempt to fetch a config
table that does not exist. ADL-N is internally identified as an ADL-P,
so we need to special-case it in the FW selection code.

Fixes: 7e28d0b26759 ("drm/i915/adl-n: Enable ADL-N platform")
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621233005.3952293-1-daniele.ceraolospurio@intel.com

drm/i915/guc/slpc: Add a new SLPC selftest

This test will validate we can achieve actual frequency of RP0. Pcode
grants frequencies based on what GuC is requesting. However, thermal
throttling can limit what is being granted. Add a test to request for
max, but don't fail the test if RP0 is not granted due to throttle
reasons.

Also optimize the selftest by using a common run_test function to avoid
code duplication. Rename the "clamp" tests to vary_max_freq and
vary_min_freq.

v2: Fix compile warning
v3: Review comments (Ashutosh). Added a FIXME for the media RP0 case.
v4: Checkpatch (strict) fixes, remove FIXME and other comments (Ashutosh)

Fixes commit 8ee2c227822e ("drm/i915/guc/slpc: Add SLPC selftest")

Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220627230346.27720-1-vinay.belgaumkar@intel.com

drm/i915: Fix a lockdep warning at error capture

For some platfroms we use stop_machine version of
gen8_ggtt_insert_page/gen8_ggtt_insert_entries to avoid a
concurrent GGTT access bug but this causes a circular locking
dependency warning:

  Possible unsafe locking scenario:
        CPU0                    CPU1
        ----                    ----
   lock(&ggtt->error_mutex);
                                lock(dma_fence_map);
                                lock(&ggtt->error_mutex);
   lock(cpu_hotplug_lock);

Fix this by calling gen8_ggtt_insert_page/gen8_ggtt_insert_entries
directly at error capture which is concurrent GGTT access safe because
reset path make sure of that.

v2: Fix rebase conflict and added a comment.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5595
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624110821.29190-1-nirmoy.das@intel.com

drm/i915/guc/slpc: Use non-blocking H2G for waitboost

SLPC min/max frequency updates require H2G calls. We are seeing
timeouts when GuC channel is backed up and it is unable to respond
in a timely fashion causing warnings and affecting CI.

This is seen when waitboosting happens during a stress test.
this patch updates the waitboost path to use a non-blocking
H2G call instead, which returns as soon as the message is
successfully transmitted.

v2: Use drm_notice to report any errors that might occur while
sending the waitboost H2G request (Tvrtko)
v3: Add drm_notice inside force_min_freq (Ashutosh)

Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623003225.23301-1-vinay.belgaumkar@intel.com

drm/i915/reset: Add additional steps for Wa_22011802037 for execlist backend

For execlists backend, current implementation of Wa_22011802037 is to
stop the CS before doing a reset of the engine. This WA was further
extended to wait for any pending MI FORCE WAKEUPs before issuing a
reset. Add the extended steps in the execlist path of reset.

In addition, extend the WA to gen11.

v2: (Tvrtko)
- Clarify comments, commit message, fix typos
- Use IS_GRAPHICS_VER for gen 11/12 checks

v3: (Daneile)
- Drop changes to intel_ring_submission since WA does not apply to it
- Log an error if MSG IDLE is not defined for an engine

Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Fixes: f6aa0d713c88 ("drm/i915: Add Wa_22011802037 force cs halt")
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621192105.2100585-1-umesh.nerlige.ramappa@intel.com

drm/i915/guc: Don't update engine busyness stats too frequently

Using two different types of workoads, it was observed that
guc_update_engine_gt_clks was being called too frequently and/or
causing a CPU-to-lmem bandwidth hit over PCIE. Details on
the workloads and numbers are in the notes below.

Background: At the moment, guc_update_engine_gt_clks can be invoked
via one of 3 ways. #1 and #2 are infrequent under normal operating
conditions:
     1.When a predefined "ping_delay" timer expires so that GuC-
       busyness can sample the GTPM clock counter to ensure it
       doesn't miss a wrap-around of the 32-bits of the HW counter.
       (The ping_delay is calculated based on 1/8th the time taken
       for the counter go from 0x0 to 0xffffffff based on the
       GT frequency. This comes to about once every 28 seconds at a
       GT frequency of 19.2Mhz).
     2.In preparation for a gt reset.
     3.In response to __gt_park events (as the gt power management
       puts the gt into a lower power state when there is no work
       being done).

Root-cause: For both the workloads described farther below, it was
observed that when user space calls IOCTLs that unparks the
gt momentarily and repeats such calls many times in quick succession,
it triggers calling guc_update_engine_gt_clks as many times. However,
the primary purpose of guc_update_engine_gt_clks is to ensure we don't
miss the wraparound while the counter is ticking. Thus, the solution
is to ensure we skip that check if gt_park is calling this function
earlier than necessary.

Solution: Snapshot jiffies when we do actually update the busyness
stats. Then get the new jiffies every time intel_guc_busyness_park
is called and bail if we are being called too soon. Use half of the
ping_delay as a safe threshold.

NOTE1: Workload1: IGTs' gem_create was modified to create a file handle,
allocate memory with sizes that range from a min of 4K to the max supported
(in power of two step-sizes). Its maps, modifies and reads back the
memory. Allocations and modification is repeated until total memory
allocation reaches the max. Then the file handle is closed. With this
workload, guc_update_engine_gt_clks was called over 188 thousand times
in the span of 15 seconds while this test ran three times. With this patch,
the number of calls reduced to 14.

NOTE2: Workload2: 30 transcode sessions are created in quick succession.
While these sessions are created, pcm-iio tool was used to measure I/O
read operation bandwidth consumption sampled at 100 milisecond intervals
over the course of 20 seconds. The total bandwidth consumed over 20 seconds
without this patch was measured at average at 311KBps per sample. With this
patch, the number went down to about 175Kbps which is about a 43% savings.

Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623023157.211650-2-alan.previn.teres.alexis@intel.com

Revert "drm/i915: Hold reference to intel_context over life of i915_request"

This reverts commit 1e98d8c52ed5dfbaf273c4423c636525c2ce59e7.

The problem with this patch is that it makes i915_request to hold a
reference to intel_context, which in turn holds a reference on the VM.
This strong back referencing can lead to reference loops which leads
to resource leak.

An example is the upcoming VM_BIND work which requires VM to hold
a reference to some shared VM specific BO. But this BO's dma-resv
fences holds reference to the i915_request thus leading to reference
loop.

v2:
Do not use reserved requests for virtual engines

Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Mathew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614184348.23746-3-ramalingam.c@intel.com

drm/i915: Do not access rq->engine without a reference

In i915_fence_get_driver_name(), user may not hold a
reference to rq->engine. Hence do not access it. Instead,
store required device private pointer in 'rq->i915' and use it.

Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614184348.23746-2-ramalingam.c@intel.com

drm/i915: Prefer "XEHP_" prefix for registers

We've been introducing new registers with a mix of "XEHP_"
(architecture) and "XEHPSDV_" (platform) prefixes. For consistency,
let's settle on "XEHP_" as the preferred form.

XEHPSDV_RP_STATE_CAP stays with its current name since that's truly a
platform-specific register and not something that applies to the Xe_HP
architecture as a whole.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Caz Yokoyama <caz@caztech.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624210328.308630-2-matthew.d.roper@intel.com

drm/i915: Correct duplicated/misplaced GT register definitions

XEHPSDV_FLAT_CCS_BASE_ADDR, GEN8_L3_LRA_1_GPGPU, and MMCD_MISC_CTRL were
duplicated between i915_reg.h and intel_gt_regs.h. These are all GT
registers, so we should drop the copy from i915_reg.h.

XEHPSDV_TILE0_ADDR_RANGE was defined in i915_reg.h, but really belongs
in intel_gt_regs.h. Move it.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624210328.308630-1-matthew.d.roper@intel.com

drm/i915: tweak the ordering in cpu_write_needs_clflush

For imported dma-buf objects we leave the object as cache_coherent = 0
across all platforms, which is reasonable given that have no clue what
the memory underneath is, and its not like the driver can ever manually
clflush the pages anyway (like with i915_gem_clflush_object) for such
objects. However on discrete we choose to treat cache_dirty = true as a
programmer error, leading to a warning. The simplest fix looks to be to
just change the ordering in cpu_write_needs_clflush to prevent ever
setting cache_dirty for dma-buf objects on discrete.

Fixes: d028a7690d87 ("drm/i915/dmabuf: Fix prime_mmap to work when using LMEM")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5266
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622155919.355081-1-matthew.auld@intel.com

drm/i915/selftests: Increase timeout for live_parallel_switch

With GuC submission, it takes a little bit longer switching contexts
among all available engines simultaneously, when running
live_parallel_switch subtest. Increase the timeout.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5885
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622141104.334432-1-matthew.auld@intel.com

drm/i915/gt: Re-do the intel-gtt split

Re-do what was attempted in commit 7a5c922377b4 ("drm/i915/gt: Split
intel-gtt functions by arch"). The goal of that commit was to split the
handlers for older hardware that depend on intel-gtt.ko so i915 can
be built for non-x86 archs, after some more patches. Other archs do not
need intel-gtt.ko.

Main issue with the previous approach: it moved all the hooks, including
the gen8, which is used by all platforms gen8 and newer.  Re-do the
split moving only the handlers for gen < 6, which are the only ones
calling out to the separate module.

While at it do some minor cleanups:
  - Rename the prefix s/gen5_/gmch_/ to be more accurate what platforms
    are covered by intel_ggtt_gmch.c
  - Remove dead code for gen12 out of needs_idle_maps()
  - Remove TODO comment leftover
  - Re-order if/else ladder in ggtt_probe_hw() to keep newest platforms
    first

v2: Add minor cleanups (Matt Roper)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617230559.2109427-2-lucas.demarchi@intel.com

agp/intel: Rename intel-gtt symbols

Exporting the symbols like intel_gtt_* creates some confusion inside
i915 that has symbols named similarly. In an attempt to isolate
platforms needing intel-gtt.ko, commit 7a5c922377b4 ("drm/i915/gt: Split
intel-gtt functions by arch") moved way too much
inside gt/intel_gt_gmch.c, even the functions that don't callout to this
module. Rename the symbols to make the separation clear.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617230559.2109427-1-lucas.demarchi@intel.com

drm/i915/display: Add smem fallback allocation for dpt

Add fallback smem allocation for dpt if stolen memory
allocation failed.

Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610121205.29645-1-juhapekka.heikkila@gmail.com

drm/i915: extend i915_vma_pin_iomap()

In the future display might try call this with a normal smem object,
which doesn't require PIN_MAPPABLE underneath in order to CPU map the
pages (unlike stolen). Extend i915_vma_pin_iomap() to directly use
i915_gem_object_pin_map() for such cases.

This change was suggested by Chris P Wilson, that we pin
the smem with i915_gem_object_pin_map_unlocked().

v2 (jheikkil): Change i915_gem_object_pin_map_unlocked to
i915_gem_object_pin_map

Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Jari Tahvanainen <jari.tahvanainen@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
[mauld: tweak commit message, plus minor checkpatch fix]
Link: https://patchwork.freedesktop.org/patch/msgid/20220610121205.29645-2-juhapekka.heikkila@gmail.com

drm/i915: don't leak lmem mapping in vma_evict

Don't leak lmem mapping in vma_evict, move __i915_vma_iounmap outside
i915_vma_is_map_and_fenceable.

Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610121205.29645-3-juhapekka.heikkila@gmail.com

drm/i915/gem: add missing else

Add missing else in set_proto_ctx_param() to fix coverity issue.

Addresses-Coverity: ("Unused value")
Fixes: d4433c7600f7 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)")
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: katrinzhou <katrinzhou@tencent.com>
[tursulin: fixup alignment]
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621124926.615884-1-tvrtko.ursulin@linux.intel.com

drm/i915: Fix spelling typo in comment

Fix spelling typo in comment.

Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: pengfuyuan <pengfuyuan@kylinos.cn>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/tencent_7B226C4A9BC2B5EEB37B70C188B5015D290A@qq.com

drm/i915: Add global forcewake request to drpc

We have seen multiple RC6 issues where it is useful to know
which global forcewake bits are set. Add this to the 'drpc'
debugfs output.

v2: Review comments (Ashutosh)

Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617212032.34577-1-vinay.belgaumkar@intel.com

drm/i915: Improve on suspend / resume time with VT-d enabled

When DMAR / VT-d is enabled, the display engine uses overfetching,
presumably to deal with the increased latency. To avoid display engine
errors and DMAR faults, as a workaround the GGTT is populated with scatch
PTEs when VT-d is enabled. However starting with gen10, Write-combined
writing of scratch PTES is no longer possible and as a result, populating
the full GGTT with scratch PTEs like on resume becomes very slow as
uncached access is needed.

Therefore, on integrated GPUs utilize the fact that the PTEs are stored in
stolen memory which retain content across S3 suspend. Don't clear the PTEs
on suspend and resume. This improves on resume time with around 100 ms.
While 100+ms might appear like a short time it's 10% to 20% of total resume
time and important in some applications.

One notable exception is Intel Rapid Start Technology which may cause
stolen memory to be lost across what the OS percieves as S3 suspend.
If IRST is enabled or if we can't detect whether IRST is enabled, retain
the old workaround, clearing and re-instating PTEs.

As an additional measure, if we detect that the last ggtt pte was lost
during suspend, print a warning and re-populate the GGTT ptes

On discrete GPUs, the display engine scans out from LMEM which isn't
subject to DMAR, and presumably the workaround is therefore not needed,
but that needs to be verified and disabling the workaround for dGPU,
if possible, will be deferred to a follow-up patch.

v2:
- Rely on retained ptes to also speed up suspend and resume re-binding.
- Re-build GGTT ptes if Intel rst is enabled.
v3:
- Re-build GGTT ptes also if we can't detect whether Intel rst is enabled,
and if the guard page PTE and end of GGTT was lost.
v4:
- Fix some kerneldoc issues (Matthew Auld), rebase.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617152856.249295-1-thomas.hellstrom@linux.intel.com

drm/i915/gt: Cleanup interface for MCR operations

Let's replace the assortment of intel_gt_* and intel_uncore_* functions
that operate on MCR registers with a cleaner set of interfaces:

  * intel_gt_mcr_read -- unicast read from specific instance
  * intel_gt_mcr_read_any[_fw] -- unicast read from any non-terminated
    instance
  * intel_gt_mcr_unicast_write -- unicast write to specific instance
  * intel_gt_mcr_multicast_write[_fw] -- multicast write to all instances

We'll also replace the historic "slice" and "subslice" terminology with
"group" and "instance" to match the documentation for more recent
platforms; these days MCR steering applies to more types of replication
than just slice/subslice.

v2:
- Reference the new kerneldoc from i915.rst.  (Jani)
- Tweak the wording of the documentation for a couple functions to
   clarify the difference between "_fw" and non-"_fw" forms.

v3:
- s/read/write/ to fix copy-paste mistake in a couple comments.
   (Harish)

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615001019.1821989-3-matthew.d.roper@intel.com

drm/i915/gt: Move multicast register handling to a dedicated file

Handling of multicast/replicated registers is spread across intel_gt.c
and intel_uncore.c today. As multicast handling and the related
steering logic gets more complicated with the addition of new platforms
and new rules it makes sense to centralize it all in one place.

For now the existing functions have been moved to the new .c/.h as-is.
Function renames and updates to operate in a more consistent manner will
be done in subsequent patches.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615001019.1821989-2-matthew.d.roper@intel.com

drm/i915/fdinfo: Don't show engine classes not present

Stop displaying engine classes with no engines - it is not a huge problem
if they are shown, since the values will correctly be all zeroes, but it
does count as misleading.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 055634e4b62f ("drm/i915: Expose client engine utilisation via fdinfo")
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220616140056.559074-1-tvrtko.ursulin@linux.intel.com

drm/i915: Improve user experience and driver robustness under SIGINT or similar

We have long standing customer complaints that pressing Ctrl-C (or to the
effect of) causes engine resets with otherwise well behaving programs.

Not only is logging engine resets during normal operation not desirable
since it creates support incidents, but more fundamentally we should avoid
going the engine reset path when we can since any engine reset introduces
a chance of harming an innocent context.

Reason for this undesirable behaviour is that the driver currently does
not distinguish between banned contexts and non-persistent contexts which
have been closed.

To fix this we add the distinction between the two reasons for revoking
contexts, which then allows the strict timeout only be applied to banned,
while innocent contexts (well behaving) can preempt cleanly and exit
without triggering the engine reset path.

Note that the added context exiting category applies both to closed non-
persistent context, and any exiting context when hangcheck has been
disabled by the user.

At the same time we rename the backend operation from 'ban' to 'revoke'
which more accurately describes the actual semantics. (There is no ban at
the backend level since banning is a concept driven by the scheduling
frontend. Backends are simply able to revoke a running context so that
is the more appropriate name chosen.)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220527072452.2225610-1-tvrtko.ursulin@linux.intel.com

drm/i915/pvc: Add recommended MMIO setting

As with past platforms, the bspec's performance tuning guide provides
recommended MMIO settings. Although not technically "workarounds" we
apply these through the workaround framework to ensure that they're
re-applied at the proper times (e.g., on engine resets) and that any
conflicts with real workarounds are flagged.

Bspec: 72161
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613165314.862029-1-matthew.d.roper@intel.com

drm/i915/pvc: Adjust EU per SS according to HAS_ONE_EU_PER_FUSE_BIT()

If we're treating each bit in the EU fuse register as a single EU
instead of a pair of EUs, then that also cuts the number of potential
EUs per subslice in half.

Fixes: 5ac342ef84d7 ("drm/i915/pvc: Add SSEU changes")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610230801.459577-1-matthew.d.roper@intel.com

drm/i915/pvc: Add register steering

Ponte Vecchio no longer has MSLICE or LNCF steering, but the bspec does
document several new types of multicast register ranges.  Fortunately,
most of the different MCR types all provide valid values at instance
(0,0) so there's no need to read fuse registers and calculate a
non-terminated instance.  We'll lump all of those range types (BSLICE,
HALFBSLICE, TILEPSMI, CC, and L3BANK) into a single category called
"INSTANCE0" to keep things simple.  We'll also perform explicit steering
for each of these multicast register types, even if the implicit
steering setup for COMPUTE/DSS ranges would have worked too; this is
based on guidance from our hardware architects who suggested that we
move away from implicit steering and start explicitly steer all MCR
register accesses on modern platforms (we'll work on transitioning
COMPUTE/DSS to explicit steering in the future).

Note that there's one additional MCR range type defined in the bspec
(SQIDI) that we don't handle here.  Those ranges use a different
steering control register that we never touch; since instance 0 is also
always a valid setting there, we can just ignore those ranges.

Finally, we'll rename the HAS_MSLICES() macro to HAS_MSLICE_STEERING().
PVC hardware still has units referred to as mslices, but there's no
register steering based on mslice for this platform.

v2:
- Rebase on other recent changes
- Swap two table rows to keep table sorted & easy to read.  (Harish)

Bspec: 67609
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220608170700.4026648-1-matthew.d.roper@intel.com

drm/i915/xehp: Correct steering initialization

Another mistake during the conversion to DSS bitmaps: after retrieving
the DSS ID intel_sseu_find_first_xehp_dss() we forgot to modulo it down
to obtain which ID within the current gslice it is.

Fixes: b87d39019651 ("drm/i915/sseu: Disassociate internal subslice mask representation from uapi")
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607175716.3338661-1-matthew.d.roper@intel.com

drm/i915: More PVC+DG2 workarounds

A new PVC+DG2 workaround has appeared recently:
- Wa_16015675438

And a couple existing DG2 workarounds have been extended to PVC:
- Wa_14015795083
- Wa_18018781329

Note that Wa_16015675438 asks us to program a register that is in the
0x2xxx range typically associated with the RCS engine, even though PVC
does not have an RCS. By default the GuC will think we've made a
mistake and throw an exception when it sees this register on a CCS
engine's save/restore list, so we need to pass an extra GuC control flag
to tell it that this is expected and not a problem.

Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220608005108.3717895-1-matthew.d.roper@intel.com

drm/i915/uc: remove accidental static from a local variable

The arrays are static const, but the pointer shouldn't be static.

Fixes: 3d832f370d16 ("drm/i915/uc: Allow platforms to have GuC but not HuC")
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511094619.27889-1-jani.nikula@intel.com

drm/i915/dg2: Correct DSS check for Wa_1308578152

When converting our DSS masks to bitmaps, we fumbled the condition used
to check whether any DSS are present in the first gslice. Since
intel_sseu_find_first_xehp_dss() returns a 0-based number, we need a >=
condition rather than >.

Fixes: b87d39019651 ("drm/i915/sseu: Disassociate internal subslice mask representation from uapi")
Reported-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607154724.3155521-1-matthew.d.roper@intel.com

drm/i915/dg2: Add Wa_14015795083

i915 must disable Render DOP clock gating globally.

v2:
- Addressed cosmetic review comments.

Bspec: 52621
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607104542.8559-1-anshuman.gupta@intel.com

drm/i915/client: only include what's needed

Only the uapi header is required.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607092207.476653-1-jani.nikula@intel.com

drm/i915/pvc: GuC depriv applies to PVC

We missed this setting in the initial device info patch's definition of
XE_HPC_FEATURES.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220602233019.1659283-1-matthew.d.roper@intel.com

drm/i915: Add extra registers to GPU error dump

Our internal teams have identified a few additional engine registers
that are worth inspecting in error state dumps during development &
debug. Let's capture and print them as part of our error dump.

For simplicity we'll just dump these registers on gen11 and beyond.
Most of these registers have existed since earlier platforms (e.g., gen6
or gen7) but were initially introduced only for a subset of the
platforms' engines; gen11 seems to be where they became available on all
engines.

Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601210646.615946-1-matthew.d.roper@intel.com

drm/i915/pvc: Add SSEU changes

PVC splits the mask of enabled DSS over two registers. It also changes
the meaning of the EU fuse register such that each bit represents a
single EU rather than a pair of EUs.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601150725.521468-7-matthew.d.roper@intel.com

drm/i915/sseu: Disassociate internal subslice mask representation from uapi

As with EU masks, it's easier to store subslice/DSS masks internally in
a format that's more natural for the driver to work with, and then only
covert into the u8[] uapi form when the query ioctl is invoked.  Since
the hardware design changed significantly with Xe_HP, we'll use a union
to choose between the old "hsw-style" subslice masks or the newer xehp
mask.  HSW-style masks will be stored in an array of u8's, indexed by
slice (there's never more than 6 subslices per slice on older
platforms).  For Xe_HP and beyond where slices no longer exist, we only
need a single bitmask.  However we already know that this mask is
eventually going to grow too large for a simple u64 to hold, so we'll
represent it in a manner that can be operated on by the utilities in
linux/bitmap.h.

v2:
- Fix typo: BIT(s) -> BIT(ss) in gen9_sseu_device_status()

v3:
- Eliminate sseu->ss_stride and just calculate the stride while
   specifically handling uapi.  (Tvrtko)
- Use BITMAP_BITS() macro to refer to size of masks rather than
   passing I915_MAX_SS_FUSE_BITS directly.  (Tvrtko)
- Report compute/geometry DSS masks separately when dumping Xe_HP SSEU
   info.  (Tvrtko)
- Restore dropped range checks to intel_sseu_has_subslice().  (Tvrtko)

v4:
- Make the bitmap size macro check the size of the .xehp field rather
   than the containing union.  (Tvrtko)
- Don't add GEM_BUG_ON() intel_sseu_has_subslice()'s check for whether
   slice or subslice ID exceed sseu->max_[sub]slices; various loops
   in the driver are expected to exceed these, so we should just
   silently return 'false.'

v5:
- Move XEHP_BITMAP_BITS() to the header so that we can also replace a
   usage of I915_MAX_SS_FUSE_BITS in one of the inline functions.
   (Bala)
- Change the local variable in intel_slicemask_from_xehp_dssmask() from
   u16 to 'unsigned long' to make it a bit more future-proof.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601150725.521468-6-matthew.d.roper@intel.com

drm/i915/sseu: Don't try to store EU mask internally in UAPI format

Storing the EU mask internally in the same format the I915_QUERY
topology queries use makes the final copy_to_user() a bit simpler, but
makes the rest of the driver's SSEU more complicated and harder to
follow.  Let's switch to an internal representation that's more natural:
Xe_HP platforms will be a simple array of u16 masks, whereas pre-Xe_HP
platforms will be a two-dimensional array, indexed by [slice][subslice].
We'll convert to the uapi format only when the query uapi is called.

v2:
- Drop has_common_ss_eumask.  We waste some space repeating identical
   EU masks for every single DSS, but the code is simpler without it.
   (Tvrtko)

v3:
- Mask down EUs passed to sseu_set_eus at the callsite rather than
   inside the function.  (Tvrtko)
- Eliminate sseu->eu_stride and calculate it when needed.  (Tvrtko)

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601150725.521468-5-matthew.d.roper@intel.com

drm/i915/sseu: Simplify gen11+ SSEU handling

Although gen11 and gen12 architectures supported the concept of multiple
slices, in practice all the platforms that were actually designed only
had a single slice (i.e., note the parameters to 'intel_sseu_set_info'
that we pass for each platform). We can simplify the code slightly by
dropping the multi-slice logic from gen11+ platforms.

v2:
- Promote drm_dbg to drm_WARN_ON if the slice fuse register reports
unexpected fusing. (Tvrtko)

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601150725.521468-4-matthew.d.roper@intel.com