Kees Cook [Thu, 20 Feb 2020 06:23:18 +0000 (22:23 -0800)]
x86/xen: Distribute switch variables for initialization
[ Upstream commit
9038ec99ceb94fb8d93ade5e236b2928f0792c7c ]
Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.
To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.
arch/x86/xen/enlighten_pv.c: In function ‘xen_write_msr_safe’:
arch/x86/xen/enlighten_pv.c:904:12: warning: statement will never be executed [-Wswitch-unreachable]
904 | unsigned which;
| ^~~~~
[1] https://bugs.llvm.org/show_bug.cgi?id=44916
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200220062318.69299-1-keescook@chromium.org
Reviewed-by: Juergen Gross <jgross@suse.com>
[boris: made @which an 'unsigned int']
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michal Swiatkowski [Thu, 13 Feb 2020 21:31:24 +0000 (13:31 -0800)]
ice: Don't tell the OS that link is going down
[ Upstream commit
8a55c08d3bbc9ffc9639f69f742e59ebd99f913b ]
Remove code that tell the OS that link is going down when user
change flow control via ethtool. When link is up it isn't certain
that link goes down after 0x0605 aq command. If link doesn't go
down, OS thinks that link is down, but physical link is up. To
reset this state user have to take interface down and up.
If link goes down after 0x0605 command, FW send information
about that and after that driver tells the OS that the link goes
down. So this code in ethtool is unnecessary.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Keith Busch [Wed, 19 Feb 2020 15:59:36 +0000 (00:59 +0900)]
nvme: Fix uninitialized-variable warning
[ Upstream commit
15755854d53b4bbb0bb37a0fce66f0156cfc8a17 ]
gcc may detect a false positive on nvme using an unintialized variable
if setting features fails. Since this is not a fast path, explicitly
initialize this variable to suppress the warning.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Julian Wiedmann [Mon, 10 Feb 2020 09:48:11 +0000 (10:48 +0100)]
s390/qdio: fill SL with absolute addresses
[ Upstream commit
e9091ffd6a0aaced111b5d6ead5eaab5cd7101bc ]
As the comment says, sl->sbal holds an absolute address. qeth currently
solves this through wild casting, while zfcp doesn't care.
Handle this properly in the code that actually builds the SL.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com> [for qdio]
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
H.J. Lu [Thu, 16 Jan 2020 20:46:51 +0000 (12:46 -0800)]
x86/boot/compressed: Don't declare __force_order in kaslr_64.c
[ Upstream commit
df6d4f9db79c1a5d6f48b59db35ccd1e9ff9adfc ]
GCC 10 changed the default to -fno-common, which leads to
LD arch/x86/boot/compressed/vmlinux
ld: arch/x86/boot/compressed/pgtable_64.o:(.bss+0x0): multiple definition of `__force_order'; \
arch/x86/boot/compressed/kaslr_64.o:(.bss+0x0): first defined here
make[2]: *** [arch/x86/boot/compressed/Makefile:119: arch/x86/boot/compressed/vmlinux] Error 1
Since __force_order is already provided in pgtable_64.c, there is no
need to declare __force_order in kaslr_64.c.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200124181811.4780-1-hjl.tools@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Wed, 12 Feb 2020 10:32:18 +0000 (12:32 +0200)]
nvme-pci: Use single IRQ vector for old Apple models
[ Upstream commit
98f7b86a0becc1154b1a6df6e75c9695dfd87e0d ]
People reported that old Apple machines are not working properly
if the non-first IRQ vector is in use.
Set quirk for that models to limit IRQ to use first vector only.
Based on original patch by GitHub user npx001.
Link: https://github.com/Dunedan/mbp-2016-linux/issues/9
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Leif Liddy <leif.liddy@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shyjumon N [Thu, 6 Feb 2020 20:17:25 +0000 (13:17 -0700)]
nvme/pci: Add sleep quirk for Samsung and Toshiba drives
[ Upstream commit
1fae37accfc5872af3905d4ba71dc6ab15829be7 ]
The Samsung SSD SM981/PM981 and Toshiba SSD KBG40ZNT256G on the Lenovo
C640 platform experience runtime resume issues when the SSDs are kept in
sleep/suspend mode for long time.
This patch applies the 'Simple Suspend' quirk to these configurations.
With this patch, the issue had not been observed in a 1+ day test.
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shyjumon N <shyjumon.n@intel.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kai-Heng Feng [Mon, 10 Feb 2020 07:51:15 +0000 (15:51 +0800)]
iommu/amd: Disable IOMMU on Stoney Ridge systems
[ Upstream commit
3dfee47b215e49788cfc80e474820ea2e948c031 ]
Serious screen flickering when Stoney Ridge outputs to a 4K monitor.
Use identity-mapping and PCI ATS doesn't help this issue.
According to Alex Deucher, IOMMU isn't enabled on Windows, so let's do
the same here to avoid screen flickering on 4K monitor.
Cc: Alex Deucher <alexander.deucher@amd.com>
Bug: https://gitlab.freedesktop.org/drm/amd/issues/961
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hamdan Igbaria [Wed, 5 Feb 2020 12:31:12 +0000 (14:31 +0200)]
net/mlx5: DR, Fix matching on vport gvmi
[ Upstream commit
52d214976d4f64504c1bbb52d47b46a5a3d5ee42 ]
Set vport gvmi in the tag, only when source gvmi is set in the bit mask.
Fixes:
26d688e3 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Javier Martinez Canillas [Mon, 17 Feb 2020 11:39:47 +0000 (12:39 +0100)]
efi: Only print errors about failing to get certs if EFI vars are found
[ Upstream commit
3be54d558c75562e42bc83d665df024bd79d399b ]
If CONFIG_LOAD_UEFI_KEYS is enabled, the kernel attempts to load the certs
from the db, dbx and MokListRT EFI variables into the appropriate keyrings.
But it just assumes that the variables will be present and prints an error
if the certs can't be loaded, even when is possible that the variables may
not exist. For example the MokListRT variable will only be present if shim
is used.
So only print an error message about failing to get the certs list from an
EFI variable if this is found. Otherwise these printed errors just pollute
the kernel log ring buffer with confusing messages like the following:
[ 5.427251] Couldn't get size: 0x800000000000000e
[ 5.427261] MODSIGN: Couldn't get UEFI db list
[ 5.428012] Couldn't get size: 0x800000000000000e
[ 5.428023] Couldn't get UEFI MokListRT
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masahiro Yamada [Sun, 16 Feb 2020 14:48:29 +0000 (23:48 +0900)]
s390: make 'install' not depend on vmlinux
[ Upstream commit
94e90f727f7424d827256023cace829cad6896f4 ]
For the same reason as commit
19514fc665ff ("arm, kbuild: make "make
install" not depend on vmlinux"), the install targets should never
trigger the rebuild of the kernel.
The variable, CONFIGURE, is not set by anyone. Remove it as well.
Link: https://lkml.kernel.org/r/20200216144829.27023-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vasily Averin [Fri, 24 Jan 2020 05:48:55 +0000 (08:48 +0300)]
s390/cio: cio_ignore_proc_seq_next should increase position index
[ Upstream commit
8b101a5e14f2161869636ff9cb4907b7749dc0c2 ]
if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283
Link: https://lore.kernel.org/r/d44c53a7-9bc1-15c7-6d4a-0c10cb9dffce@virtuozzo.com
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marco Felsch [Mon, 20 Jan 2020 09:17:29 +0000 (10:17 +0100)]
watchdog: da9062: do not ping the hw during stop()
[ Upstream commit
e9a0e65eda3f78d0b04ec6136c591c000cbc3b76 ]
The da9062 hw has a minimum ping cool down phase of at least 200ms. The
driver takes that into account by setting the min_hw_heartbeat_ms to
300ms and the core guarantees that the hw limit is observed for the
ping() calls. But the core can't guarantee the required minimum ping
cool down phase if a stop() command is send immediately after the ping()
command. So it is not allowed to ping the watchdog within the stop()
command as the driver does. Remove the ping can be done without doubts
because the watchdog gets disabled anyway and a (re)start resets the
watchdog counter too.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200120091729.16256-1-m.felsch@pengutronix.de
[groeck: Updated description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul Cercueil [Sun, 16 Feb 2020 19:39:43 +0000 (16:39 -0300)]
net: ethernet: dm9000: Handle -EPROBE_DEFER in dm9000_parse_dt()
[ Upstream commit
9a6a0dea16177ccaecc116f560232e63bec115f1 ]
The call to of_get_mac_address() can return -EPROBE_DEFER, for instance
when the MAC address is read from a NVMEM driver that did not probe yet.
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut [Sat, 15 Feb 2020 16:54:19 +0000 (17:54 +0100)]
net: ks8851-ml: Fix 16-bit IO operation
[ Upstream commit
58292104832fef6cb4a89f736012c0e0724c3442 ]
The Micrel KSZ8851-16MLLI datasheet DS00002357B page 12 states that
BE[3:0] signals are active high. This contradicts the measurements
of the behavior of the actual chip, where these signals behave as
active low. For example, to read the CIDER register, the bus must
expose 0xc0c0 during the address phase, which means BE[3:0]=4'b1100.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut [Sat, 15 Feb 2020 16:54:18 +0000 (17:54 +0100)]
net: ks8851-ml: Fix 16-bit data access
[ Upstream commit
edacb098ea9c31589276152f09b4439052c0f2b1 ]
The packet data written to and read from Micrel KSZ8851-16MLLI must be
byte-swapped in 16-bit mode, add this byte-swapping.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut [Sat, 15 Feb 2020 16:54:17 +0000 (17:54 +0100)]
net: ks8851-ml: Remove 8-bit bus accessors
[ Upstream commit
69233bba6543a37755158ca3382765387b8078df ]
This driver is mixing 8-bit and 16-bit bus accessors for reasons unknown,
however the speculation is that this was some sort of attempt to support
the 8-bit bus mode.
As per the KS8851-16MLL documentation, all two registers accessed via the
8-bit accessors are internally 16-bit registers, so reading them using
16-bit accessors is fine. The KS_CCR read can be converted to 16-bit read
outright, as it is already a concatenation of two 8-bit reads of that
register. The KS_RXQCR accesses are 8-bit only, however writing the top
8 bits of the register is OK as well, since the driver caches the entire
16-bit register value anyway.
Finally, the driver is not used by any hardware in the kernel right now.
The only hardware available to me is one with 16-bit bus, so I have no
way to test the 8-bit bus mode, however it is unlikely this ever really
worked anyway. If the 8-bit bus mode is ever required, it can be easily
added by adjusting the 16-bit accessors to do 2 consecutive accesses,
which is how this should have been done from the beginning.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Igor Russkikh [Fri, 14 Feb 2020 15:44:52 +0000 (18:44 +0300)]
net: atlantic: check rpc result and wait for rpc address
[ Upstream commit
e7b5f97e6574dc4918e375d5f8d24ec31653cd6d ]
Artificial HW reliability tests revealed a possible hangup in
the driver. Normally, when device disappears from bus, all
register reads returns 0xFFFFFFFF.
At remote procedure invocation towards FW there is a logic
where result is compared with -1 in a loop.
That caused an infinite loop if hardware due to some issues
disappears from bus.
Add extra result checks to prevent this.
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hangbin Liu [Thu, 13 Feb 2020 09:40:54 +0000 (17:40 +0800)]
selftests: forwarding: vxlan_bridge_1d: fix tos value
[ Upstream commit
4e867c9a50ff1a07ed0b86c3b1c8bc773933d728 ]
After commit
71130f29979c ("vxlan: fix tos value before xmit") we start
strict vxlan xmit tos value by RT_TOS(), which limits the tos value less
than 0x1E. With current value 0x40 the test will failed with "v1: Expected
to capture 10 packets, got 0". So let's choose a smaller tos value for
testing.
Fixes:
d417ecf533fe ("selftests: forwarding: vxlan_bridge_1d: Add a TOS test")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hangbin Liu [Tue, 11 Feb 2020 07:32:56 +0000 (15:32 +0800)]
selftests: forwarding: use proto icmp for {gretap, ip6gretap}_mac testing
[ Upstream commit
e8023b030ce1748930e2dc76353a262fe47d4745 ]
For tc ip_proto filter, when we extract the flow via __skb_flow_dissect()
without flag FLOW_DISSECTOR_F_STOP_AT_ENCAP, we will continue extract to
the inner proto.
So for GRE + ICMP messages, we should not track GRE proto, but inner ICMP
proto.
For test mirror_gre.sh, it may make user confused if we capture ICMP
message on $h3(since the flow is GRE message). So I move the capture
dev to h3-gt{4,6}, and only capture ICMP message.
Before the fix:
]# ./mirror_gre.sh
TEST: ingress mirror to gretap (skip_hw) [ OK ]
TEST: egress mirror to gretap (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap (skip_hw) [ OK ]
TEST: ingress mirror to gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: egress mirror to gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: two simultaneously configured mirrors (skip_hw) [ OK ]
WARN: Could not test offloaded functionality
After fix:
]# ./mirror_gre.sh
TEST: ingress mirror to gretap (skip_hw) [ OK ]
TEST: egress mirror to gretap (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap (skip_hw) [ OK ]
TEST: ingress mirror to gretap: envelope MAC (skip_hw) [ OK ]
TEST: egress mirror to gretap: envelope MAC (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ]
TEST: two simultaneously configured mirrors (skip_hw) [ OK ]
WARN: Could not test offloaded functionality
Fixes:
ba8d39871a10 ("selftests: forwarding: Add test for mirror to gretap")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <pmachata@gmail.com>
Tested-by: Petr Machata <pmachata@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Harigovindan P [Thu, 6 Feb 2020 09:12:01 +0000 (14:42 +0530)]
drm/msm/dsi/pll: call vco set rate explicitly
[ Upstream commit
c6659785dfb3f8d75f1fe637e4222ff8178f5280 ]
For a given byte clock, if VCO recalc value is exactly same as
vco set rate value, vco_set_rate does not get called assuming
VCO is already set to required value. But Due to GDSC toggle,
VCO values are erased in the HW. To make sure VCO is programmed
correctly, we forcefully call set_rate from vco_prepare.
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Harigovindan P [Thu, 6 Feb 2020 08:56:15 +0000 (14:26 +0530)]
drm/msm/dsi: save pll state before dsi host is powered off
[ Upstream commit
a1028dcfd0dd97884072288d0c8ed7f30399b528 ]
Save pll state before dsi host is powered off. Without this change
some register values gets resetted.
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tomas Henzl [Tue, 4 Feb 2020 15:24:13 +0000 (16:24 +0100)]
scsi: megaraid_sas: silence a warning
[ Upstream commit
0e99b2c625da181aebf1a3d13493e3f7a5057a9c ]
Add a flag to DMA memory allocation to silence a warning.
This driver allocates DMA memory for IO frames. This allocation may exceed
MAX_ORDER pages for few megaraid_sas controllers (controllers with very
high queue depth). Consequently, the driver has logic to keep reducing the
controller queue depth until the DMA memory allocation succeeds.
On impacted megaraid_sas controllers there would be multiple DMA allocation
failures until driver settled on an allocation that fit. These failed DMA
allocation requests caused stack traces in system logs. These were not
harmful and this patch silences those warnings/stack traces.
[mkp: clarified commit desc]
Link: https://lore.kernel.org/r/20200204152413.7107-1-thenzl@redhat.com
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stephan Gerhold [Fri, 17 Jan 2020 15:34:29 +0000 (16:34 +0100)]
drm/modes: Allow DRM_MODE_ROTATE_0 when applying video mode parameters
[ Upstream commit
5c320b6ce7510653bce68cecf80cf5b2d67e907f ]
At the moment, only DRM_MODE_ROTATE_180 is allowed when we try to apply
the rotation from the video mode parameters. It is also useful to allow
DRM_MODE_ROTATE_0 in case there is only a reflect option in the video mode
parameter (e.g. video=540x960,reflect_x).
DRM_MODE_ROTATE_0 means "no rotation" and should therefore not require
any special handling, so we can just add it to the if condition.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117153429.54700-3-stephan@gerhold.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stephan Gerhold [Fri, 17 Jan 2020 15:34:28 +0000 (16:34 +0100)]
drm/modes: Make sure to parse valid rotation value from cmdline
[ Upstream commit
e6980a727154b793adb218fbc7b4d6af52a7e364 ]
A rotation value should have exactly one rotation angle.
At the moment there is no validation for this when parsing video=
parameters from the command line. This causes problems later on
when we try to combine the command line rotation with the panel
orientation.
To make sure that we generate a valid rotation value:
- Set DRM_MODE_ROTATE_0 by default (if no rotate= option is set)
- Validate that there is exactly one rotation angle set
(i.e. specifying the rotate= option multiple times is invalid)
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117153429.54700-2-stephan@gerhold.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Stultz [Wed, 29 Jan 2020 20:12:44 +0000 (20:12 +0000)]
drm: msm: Fix return type of dsi_mgr_connector_mode_valid for kCFI
[ Upstream commit
7fd2dfc3694922eb7ace4801b7208cf9f62ebc7d ]
I was hitting kCFI crashes when building with clang, and after
some digging finally narrowed it down to the
dsi_mgr_connector_mode_valid() function being implemented as
returning an int, instead of an enum drm_mode_status.
This patch fixes it, and appeases the opaque word of the kCFI
gods (seriously, clang inlining everything makes the kCFI
backtraces only really rough estimates of where things went
wrong).
Thanks as always to Sami for his help narrowing this down.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Alistair Delva <adelva@google.com>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: freedreno@lists.freedesktop.org
Cc: clang-built-linux@googlegroups.com
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Brian Masney [Sat, 18 Jan 2020 20:41:20 +0000 (15:41 -0500)]
drm/msm/mdp5: rate limit pp done timeout warnings
[ Upstream commit
ef8c9809acb0805c991bba8bdd4749fc46d44a98 ]
Add rate limiting of the 'pp done time out' warnings since these
warnings can quickly fill the dmesg buffer.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Oded Gabbay [Wed, 22 Jan 2020 22:43:06 +0000 (00:43 +0200)]
habanalabs: patched cb equals user cb in device memset
[ Upstream commit
cf01514c5c6efa2d521d35e68dff2e0674d08e91 ]
During device memory memset, the driver allocates and use a CB (command
buffer). To reuse existing code, it keeps a pointer to the CB in two
variables, user_cb and patched_cb. Therefore, there is no need to "put"
both the user_cb and patched_cb, as it will cause an underflow of the
refcnt of the CB.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Omer Shpigelman [Sun, 5 Jan 2020 09:05:45 +0000 (09:05 +0000)]
habanalabs: do not halt CoreSight during hard reset
[ Upstream commit
a37e47192dfa98f79a0cd5ab991c224b5980c982 ]
During hard reset we must not write to the device.
Hence avoid halting CoreSight during user context close if it is done
during hard reset.
In addition, we must not re-enable clock gating afterwards as it was
deliberately disabled in the beginning of the hard reset flow.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Oded Gabbay [Mon, 23 Dec 2019 15:51:48 +0000 (17:51 +0200)]
habanalabs: halt the engines before hard-reset
[ Upstream commit
908087ffbe896c100ed73d5f0ce11a5b7264af4a ]
The driver must halt the engines before doing hard-reset, otherwise the
device can go into undefined state. There is a place where the driver
didn't do that and this patch fixes it.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sergey Organov [Wed, 29 Jan 2020 11:21:46 +0000 (14:21 +0300)]
usb: gadget: serial: fix Tx stall after buffer overflow
[ Upstream commit
e4bfded56cf39b8d02733c1e6ef546b97961e18a ]
Symptom: application opens /dev/ttyGS0 and starts sending (writing) to
it while either USB cable is not connected, or nobody listens on the
other side of the cable. If driver circular buffer overflows before
connection is established, no data will be written to the USB layer
until/unless /dev/ttyGS0 is closed and re-opened again by the
application (the latter besides having no means of being notified about
the event of establishing of the connection.)
Fix: on open and/or connect, kick Tx to flush circular buffer data to
USB layer.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lars-Peter Clausen [Thu, 16 Jan 2020 13:29:01 +0000 (15:29 +0200)]
usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags
[ Upstream commit
43d565727a3a6fd24e37c7c2116475106af71806 ]
ffs_aio_cancel() can be called from both interrupt and thread context. Make
sure that the current IRQ state is saved and restored by using
spin_{un,}lock_irq{save,restore}().
Otherwise undefined behavior might occur.
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jack Pham [Fri, 31 Jan 2020 03:10:36 +0000 (19:10 -0800)]
usb: gadget: composite: Support more than 500mA MaxPower
[ Upstream commit
a2035411fa1d1206cea7d5dfe833e78481844a76 ]
USB 3.x SuperSpeed peripherals can draw up to 900mA of VBUS power
when in configured state. However, if a configuration wanting to
take advantage of this is added with MaxPower greater than 500
(currently possible if using a ConfigFS gadget) the composite
driver fails to accommodate this for a couple reasons:
- usb_gadget_vbus_draw() when called from set_config() and
composite_resume() will be passed the MaxPower value without
regard for the current connection speed, resulting in a
violation for USB 2.0 since the max is 500mA.
- the bMaxPower of the configuration descriptor would be
incorrectly encoded, again if the connection speed is only
at USB 2.0 or below, likely wrapping around U8_MAX since
the 2mA multiplier corresponds to a maximum of 510mA.
Fix these by adding checks against the current gadget->speed
when the c->MaxPower value is used (set_config() and
composite_resume()) and appropriately limit based on whether
it is currently at a low-/full-/high- or super-speed connection.
Because 900 is not divisible by 8, with the round-up division
currently used in encode_bMaxPower() a MaxPower of 900mA will
result in an encoded value of 0x71. When a host stack (including
Linux and Windows) enumerates this on a single port root hub, it
reads this value back and decodes (multiplies by 8) to get 904mA
which is strictly greater than 900mA that is typically budgeted
for that port, causing it to reject the configuration. Instead,
we should be using the round-down behavior of normal integral
division so that 900 / 8 -> 0x70 or 896mA to stay within range.
And we might as well change it for the high/full/low case as well
for consistency.
N.B. USB 3.2 Gen N x 2 allows for up to 1500mA but there doesn't
seem to be any any peripheral controller supported by Linux that
does two lane operation, so for now keeping the clamp at 900
should be fine.
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiri Benc [Thu, 6 Feb 2020 08:40:52 +0000 (09:40 +0100)]
selftests: fix too long argument
[ Upstream commit
c363eb48ada5cf732b3f489fab799fc881097842 ]
With some shells, the command construed for install of bpf selftests becomes
too large due to long list of files:
make[1]: execvp: /bin/sh: Argument list too long
make[1]: *** [../lib.mk:73: install] Error 127
Currently, each of the file lists is replicated three times in the command:
in the shell 'if' condition, in the 'echo' and in the 'rsync'. Reduce that
by one instance by using make conditionals and separate the echo and rsync
into two shell commands. (One would be inclined to just remove the '@' at
the beginning of the rsync command and let 'make' echo it by itself;
unfortunately, it appears that the '@' in the front of mkdir silences output
also for the following commands.)
Also, separate handling of each of the lists to its own shell command.
The semantics of the makefile is unchanged before and after the patch. The
ability of individual test directories to override INSTALL_RULE is retained.
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Tested-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Golle [Fri, 7 Feb 2020 09:53:35 +0000 (11:53 +0200)]
serial: ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDE
[ Upstream commit
87c5cbf71ecbb9e289d60a2df22eb686c70bf196 ]
On AR934x this UART is usually not initialized by the bootloader
as it is only used as a secondary serial port while the primary
UART is a newly introduced NS16550-compatible.
In order to make use of the ar933x-uart on AR934x without RTS/CTS
hardware flow control, one needs to set the
UART_CS_{RX,TX}_READY_ORIDE bits as other than on AR933x where this
UART is used as primary/console, the bootloader on AR934x typically
doesn't set those bits.
Setting them explicitely on AR933x should not do any harm, so just
set them unconditionally.
Tested-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20200207095335.GA179836@makrotopia.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kai Vehmanen [Thu, 6 Feb 2020 20:02:21 +0000 (22:02 +0200)]
ALSA: hda: do not override bus codec_mask in link_get()
[ Upstream commit
43bcb1c0507858cdc95e425017dcc33f8105df39 ]
snd_hdac_ext_bus_link_get() does not work correctly in case
there are multiple codecs on the bus. It unconditionally
resets the bus->codec_mask value. As per documentation in
hdaudio.h and existing use in client code, this field should
be used to store bit flag of detected codecs on the bus.
By overwriting value of the codec_mask, information on all
detected codecs is lost. No current user of hdac is impacted,
but use of bus->codec_mask is planned in future patches
for SOF.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200206200223.7715-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cengiz Can [Wed, 4 Mar 2020 10:58:19 +0000 (13:58 +0300)]
blktrace: fix dereference after null check
[ Upstream commit
153031a301bb07194e9c37466cfce8eacb977621 ]
There was a recent change in blktrace.c that added a RCU protection to
`q->blk_trace` in order to fix a use-after-free issue during access.
However the change missed an edge case that can lead to dereferencing of
`bt` pointer even when it's NULL:
Coverity static analyzer marked this as a FORWARD_NULL issue with CID
1460458.
```
/kernel/trace/blktrace.c: 1904 in sysfs_blk_trace_attr_store()
1898 ret = 0;
1899 if (bt == NULL)
1900 ret = blk_trace_setup_queue(q, bdev);
1901
1902 if (ret == 0) {
1903 if (attr == &dev_attr_act_mask)
>>> CID 1460458: Null pointer dereferences (FORWARD_NULL)
>>> Dereferencing null pointer "bt".
1904 bt->act_mask = value;
1905 else if (attr == &dev_attr_pid)
1906 bt->pid = value;
1907 else if (attr == &dev_attr_start_lba)
1908 bt->start_lba = value;
1909 else if (attr == &dev_attr_end_lba)
```
Added a reassignment with RCU annotation to fix the issue.
Fixes:
c780e86dd48 ("blktrace: Protect q->blk_trace with RCU")
Cc: stable@vger.kernel.org
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Cengiz Can <cengiz@kernel.wtf>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masami Hiramatsu [Tue, 7 Jan 2020 14:42:24 +0000 (23:42 +0900)]
kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic
[ Upstream commit
e4add247789e4ba5e08ad8256183ce2e211877d4 ]
optimize_kprobe() and unoptimize_kprobe() cancels if a given kprobe
is on the optimizing_list or unoptimizing_list already. However, since
the following commit:
f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")
modified the update timing of the KPROBE_FLAG_OPTIMIZED, it doesn't
work as expected anymore.
The optimized_kprobe could be in the following states:
- [optimizing]: Before inserting jump instruction
op.kp->flags has KPROBE_FLAG_OPTIMIZED and
op->list is not empty.
- [optimized]: jump inserted
op.kp->flags has KPROBE_FLAG_OPTIMIZED and
op->list is empty.
- [unoptimizing]: Before removing jump instruction (including unused
optprobe)
op.kp->flags has KPROBE_FLAG_OPTIMIZED and
op->list is not empty.
- [unoptimized]: jump removed
op.kp->flags doesn't have KPROBE_FLAG_OPTIMIZED and
op->list is empty.
Current code mis-expects [unoptimizing] state doesn't have
KPROBE_FLAG_OPTIMIZED, and that can cause incorrect results.
To fix this, introduce optprobe_queued_unopt() to distinguish [optimizing]
and [unoptimizing] states and fixes the logic in optimize_kprobe() and
unoptimize_kprobe().
[ mingo: Cleaned up the changelog and the code a bit. ]
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Fixes:
f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")
Link: https://lkml.kernel.org/r/157840814418.7181.13478003006386303481.stgit@devnote2
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masahiro Yamada [Wed, 4 Dec 2019 02:51:48 +0000 (11:51 +0900)]
kbuild: fix 'No such file or directory' warning when cleaning
[ Upstream commit
cf6b58ab2d55f5a143c88c219c8e66ff0720fa69 ]
Since commit
fcbb8461fd23 ("kbuild: remove header compile test"),
'make clean' with O= option in the pristine source tree emits
'No such file or directory' warning.
$ git clean -d -f -x
$ make O=foo clean
make[1]: Entering directory '/home/masahiro/linux/foo'
find: ‘usr/include’: No such file or directory
make[1]: Leaving directory '/home/masahiro/linux/foo'
Fixes:
fcbb8461fd23 ("kbuild: remove header compile test")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Mon, 17 Feb 2020 20:43:18 +0000 (13:43 -0700)]
RDMA/core: Fix use of logical OR in get_new_pps
[ Upstream commit
4ca501d6aaf21de31541deac35128bbea8427aa6 ]
Clang warns:
../drivers/infiniband/core/security.c:351:41: warning: converting the
enum constant to a boolean [-Wint-in-bool-context]
if (!(qp_attr_mask & (IB_QP_PKEY_INDEX || IB_QP_PORT)) && qp_pps) {
^
1 warning generated.
A bitwise OR should have been used instead.
Fixes:
1dd017882e01 ("RDMA/core: Fix protection fault in get_pkey_idx_qp_list")
Link: https://lore.kernel.org/r/20200217204318.13609-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/889
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maor Gottlieb [Thu, 27 Feb 2020 12:57:28 +0000 (14:57 +0200)]
RDMA/core: Fix pkey and port assignment in get_new_pps
[ Upstream commit
801b67f3eaafd3f2ec8b65d93142d4ffedba85df ]
When port is part of the modify mask, then we should take it from the
qp_attr and not from the old pps. Same for PKEY. Otherwise there are
panics in some configurations:
RIP: 0010:get_pkey_idx_qp_list+0x50/0x80 [ib_core]
Code: c7 18 e8 13 04 30 ef 0f b6 43 06 48 69 c0 b8 00 00 00 48 03 85 a0 04 00 00 48 8b 50 20 48 8d 48 20 48 39 ca 74 1a 0f b7 73 04 <66> 39 72 10 75 08 eb 10 66 39 72 10 74 0a 48 8b 12 48 39 ca 75 f2
RSP: 0018:
ffffafb3480932f0 EFLAGS:
00010203
RAX:
ffff98059ababa10 RBX:
ffff980d926e8cc0 RCX:
ffff98059ababa30
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffff98059ababa28
RBP:
ffff98059b940000 R08:
00000000000310c0 R09:
ffff97fe47c07480
R10:
0000000000000036 R11:
0000000000000200 R12:
0000000000000071
R13:
ffff98059b940000 R14:
ffff980d87f948a0 R15:
0000000000000000
FS:
00007f88deb31740(0000) GS:
ffff98059f600000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000010 CR3:
0000000853e26001 CR4:
00000000001606e0
Call Trace:
port_pkey_list_insert+0x3d/0x1b0 [ib_core]
? kmem_cache_alloc_trace+0x215/0x220
ib_security_modify_qp+0x226/0x3a0 [ib_core]
_ib_modify_qp+0xcf/0x390 [ib_core]
ipoib_init_qp+0x7f/0x200 [ib_ipoib]
? rvt_modify_port+0xd0/0xd0 [rdmavt]
? ib_find_pkey+0x99/0xf0 [ib_core]
ipoib_ib_dev_open_default+0x1a/0x200 [ib_ipoib]
ipoib_ib_dev_open+0x96/0x130 [ib_ipoib]
ipoib_open+0x44/0x130 [ib_ipoib]
__dev_open+0xd1/0x160
__dev_change_flags+0x1ab/0x1f0
dev_change_flags+0x23/0x60
do_setlink+0x328/0xe30
? __nla_validate_parse+0x54/0x900
__rtnl_newlink+0x54e/0x810
? __alloc_pages_nodemask+0x17d/0x320
? page_fault+0x30/0x50
? _cond_resched+0x15/0x30
? kmem_cache_alloc_trace+0x1c8/0x220
rtnl_newlink+0x43/0x60
rtnetlink_rcv_msg+0x28f/0x350
? kmem_cache_alloc+0x1fb/0x200
? _cond_resched+0x15/0x30
? __kmalloc_node_track_caller+0x24d/0x2d0
? rtnl_calcit.isra.31+0x120/0x120
netlink_rcv_skb+0xcb/0x100
netlink_unicast+0x1e0/0x340
netlink_sendmsg+0x317/0x480
? __check_object_size+0x48/0x1d0
sock_sendmsg+0x65/0x80
____sys_sendmsg+0x223/0x260
? copy_msghdr_from_user+0xdc/0x140
___sys_sendmsg+0x7c/0xc0
? skb_dequeue+0x57/0x70
? __inode_wait_for_writeback+0x75/0xe0
? fsnotify_grab_connector+0x45/0x80
? __dentry_kill+0x12c/0x180
__sys_sendmsg+0x58/0xa0
do_syscall_64+0x5b/0x200
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f88de467f10
Link: https://lore.kernel.org/r/20200227125728.100551-1-leon@kernel.org
Cc: <stable@vger.kernel.org>
Fixes:
1dd017882e01 ("RDMA/core: Fix protection fault in get_pkey_idx_qp_list")
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Theodore Ts'o [Sun, 23 Feb 2020 19:54:58 +0000 (14:54 -0500)]
dm thin metadata: fix lockdep complaint
[ Upstream commit
3918e0667bbac99400b44fa5aef3f8be2eeada4a ]
[ 3934.173244] ======================================================
[ 3934.179572] WARNING: possible circular locking dependency detected
[ 3934.185884] 5.4.21-xfstests #1 Not tainted
[ 3934.190151] ------------------------------------------------------
[ 3934.196673] dmsetup/8897 is trying to acquire lock:
[ 3934.201688]
ffffffffbce82b18 (shrinker_rwsem){++++}, at: unregister_shrinker+0x22/0x80
[ 3934.210268]
but task is already holding lock:
[ 3934.216489]
ffff92a10cc5e1d0 (&pmd->root_lock){++++}, at: dm_pool_metadata_close+0xba/0x120
[ 3934.225083]
which lock already depends on the new lock.
[ 3934.564165] Chain exists of:
shrinker_rwsem --> &journal->j_checkpoint_mutex --> &pmd->root_lock
For a more detailed lockdep report, please see:
https://lore.kernel.org/r/
20200220234519.GA620489@mit.edu
We shouldn't need to hold the lock while are just tearing down and
freeing the whole metadata pool structure.
Fixes:
44d8ebf436399a4 ("dm thin metadata: use pool locking at end of dm_pool_metadata_close")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aaro Koskinen [Wed, 26 Feb 2020 16:49:01 +0000 (18:49 +0200)]
net: stmmac: fix notifier registration
[ Upstream commit
474a31e13a4e9749fb3ee55794d69d0f17ee0998 ]
We cannot register the same netdev notifier multiple times when probing
stmmac devices. Register the notifier only once in module init, and also
make debugfs creation/deletion safe against simultaneous notifier call.
Fixes:
481a7d154cbb ("stmmac: debugfs entry name is not be changed when udev rename device name.")
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Fainelli [Mon, 24 Feb 2020 23:56:32 +0000 (15:56 -0800)]
net: dsa: bcm_sf2: Forcibly configure IMP port for 1Gb/sec
[ Upstream commit
98c5f7d44fef309e692c24c6d71131ee0f0871fb ]
We are still experiencing some packet loss with the existing advanced
congestion buffering (ACB) settings with the IMP port configured for
2Gb/sec, so revert to conservative link speeds that do not produce
packet loss until this is resolved.
Fixes:
8f1880cbe8d0 ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec")
Fixes:
de34d7084edd ("net: dsa: bcm_sf2: Only 7278 supports 2Gb/sec IMP port")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hui Wang [Wed, 19 Feb 2020 05:23:06 +0000 (13:23 +0800)]
ALSA: hda/realtek - Fix a regression for mute led on Lenovo Carbon X1
[ Upstream commit
c37c0ab029569a75fd180edb03d411e7a28a936f ]
Need to chain the THINKPAD_ACPI, otherwise the mute led will not
work.
Fixes:
d2cd795c4ece ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200219052306.24935-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paolo Valente [Mon, 3 Feb 2020 10:40:55 +0000 (11:40 +0100)]
block, bfq: do not insert oom queue into position tree
[ Upstream commit
32c59e3a9a5a0b180dd015755d6d18ca31e55935 ]
BFQ maintains an ordered list, implemented with an RB tree, of
head-request positions of non-empty bfq_queues. This position tree,
inherited from CFQ, is used to find bfq_queues that contain I/O close
to each other. BFQ merges these bfq_queues into a single shared queue,
if this boosts throughput on the device at hand.
There is however a special-purpose bfq_queue that does not participate
in queue merging, the oom bfq_queue. Yet, also this bfq_queue could be
wrongly added to the position tree. So bfqq_find_close() could return
the oom bfq_queue, which is a source of further troubles in an
out-of-memory situation. This commit prevents the oom bfq_queue from
being inserted into the position tree.
Tested-by: Patrick Dung <patdung100@gmail.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paolo Valente [Mon, 3 Feb 2020 10:40:56 +0000 (11:40 +0100)]
block, bfq: get extra ref to prevent a queue from being freed during a group move
[ Upstream commit
ecedd3d7e19911ab8fe42f17b77c0a30fe7f4db3 ]
In bfq_bfqq_move(), the bfq_queue, say Q, to be moved to a new group
may happen to be deactivated in the scheduling data structures of the
source group (and then activated in the destination group). If Q is
referred only by the data structures in the source group when the
deactivation happens, then Q is freed upon the deactivation.
This commit addresses this issue by getting an extra reference before
the possible deactivation, and releasing this extra reference after Q
has been moved.
Tested-by: Chris Evich <cevich@redhat.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Thu, 5 Mar 2020 15:43:52 +0000 (16:43 +0100)]
Linux 5.4.24
Jan Kara [Thu, 6 Feb 2020 14:28:12 +0000 (15:28 +0100)]
blktrace: Protect q->blk_trace with RCU
[ Upstream commit
c780e86dd48ef6467a1146cf7d0fe1e05a635039 ]
KASAN is reporting that __blk_add_trace() has a use-after-free issue
when accessing q->blk_trace. Indeed the switching of block tracing (and
thus eventual freeing of q->blk_trace) is completely unsynchronized with
the currently running tracing and thus it can happen that the blk_trace
structure is being freed just while __blk_add_trace() works on it.
Protect accesses to q->blk_trace by RCU during tracing and make sure we
wait for the end of RCU grace period when shutting down tracing. Luckily
that is rare enough event that we can afford that. Note that postponing
the freeing of blk_trace to an RCU callback should better be avoided as
it could have unexpected user visible side-effects as debugfs files
would be still existing for a short while block tracing has been shut
down.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205711
CC: stable@vger.kernel.org
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: Tristan Madani <tristmd@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jim Mattson [Fri, 6 Dec 2019 23:46:36 +0000 (15:46 -0800)]
kvm: nVMX: VMWRITE checks unsupported field before read-only field
commit
693e02cc24090c379217138719d9d84e50036b24 upstream.
According to the SDM, VMWRITE checks to see if the secondary source
operand corresponds to an unsupported VMCS field before it checks to
see if the secondary source operand corresponds to a VM-exit
information field and the processor does not support writing to
VM-exit information fields.
Fixes:
49f705c5324aa ("KVM: nVMX: Implement VMREAD and VMWRITE")
Signed-off-by: Jim Mattson <jmattson@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Jon Cargille <jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jim Mattson [Fri, 6 Dec 2019 23:46:35 +0000 (15:46 -0800)]
kvm: nVMX: VMWRITE checks VMCS-link pointer before VMCS field
commit
dd2d6042b7f4a5440705b4ffc6c4c2dba81a43b7 upstream.
According to the SDM, a VMWRITE in VMX non-root operation with an
invalid VMCS-link pointer results in VMfailInvalid before the validity
of the VMCS field in the secondary source operand is checked.
For consistency, modify both handle_vmwrite and handle_vmread, even
though there was no problem with the latter.
Fixes:
6d894f498f5d1 ("KVM: nVMX: vmread/vmwrite: Use shadow vmcs12 if running L2")
Signed-off-by: Jim Mattson <jmattson@google.com>
Cc: Liran Alon <liran.alon@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Jon Cargille <jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Rientjes [Fri, 31 Jan 2020 06:14:48 +0000 (22:14 -0800)]
mm, thp: fix defrag setting if newline is not used
commit
f42f25526502d851d0e3ca1e46297da8aafce8a7 upstream.
If thp defrag setting "defer" is used and a newline is *not* used when
writing to the sysfs file, this is interpreted as the "defer+madvise"
option.
This is because we do prefix matching and if five characters are written
without a newline, the current code ends up comparing to the first five
bytes of the "defer+madvise" option and using that instead.
Use the more appropriate sysfs_streq() that handles the trailing newline
for us. Since this doubles as a nice cleanup, do it in enabled_store()
as well.
The current implementation relies on prefix matching: the number of
bytes compared is either the number of bytes written or the length of
the option being compared. With a newline, "defer\n" does not match
"defer+"madvise"; without a newline, however, "defer" is considered to
match "defer+madvise" (prefix matching is only comparing the first five
bytes). End result is that writing "defer" is broken unless it has an
additional trailing character.
This means that writing "madv" in the past would match and set
"madvise". With strict checking, that no longer is the case but it is
unlikely anybody is currently doing this.
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2001171411020.56385@chino.kir.corp.google.com
Fixes:
21440d7eb904 ("mm, thp: add new defer+madvise defrag option")
Signed-off-by: David Rientjes <rientjes@google.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yang [Fri, 31 Jan 2020 06:14:29 +0000 (22:14 -0800)]
mm/huge_memory.c: use head to check huge zero page
commit
cb829624867b5ab10bc6a7036d183b1b82bfe9f8 upstream.
The page could be a tail page, if this is the case, this BUG_ON will
never be triggered.
Link: http://lkml.kernel.org/r/20200110032610.26499-1-richardw.yang@linux.intel.com
Fixes:
e9b61f19858a ("thp: reintroduce split_huge_page()")
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Hubbard [Fri, 31 Jan 2020 06:12:43 +0000 (22:12 -0800)]
mm/gup: allow FOLL_FORCE for get_user_pages_fast()
commit
f4000fdf435b8301a11cf85237c561047f8c4c72 upstream.
Commit
817be129e6f2 ("mm: validate get_user_pages_fast flags") allowed
only FOLL_WRITE and FOLL_LONGTERM to be passed to get_user_pages_fast().
This, combined with the fact that get_user_pages_fast() falls back to
"slow gup", which *does* accept FOLL_FORCE, leads to an odd situation:
if you need FOLL_FORCE, you cannot call get_user_pages_fast().
There does not appear to be any reason for filtering out FOLL_FORCE.
There is nothing in the _fast() implementation that requires that we
avoid writing to the pages. So it appears to have been an oversight.
Fix by allowing FOLL_FORCE to be set for get_user_pages_fast().
Link: http://lkml.kernel.org/r/20200107224558.2362728-9-jhubbard@nvidia.com
Fixes:
817be129e6f2 ("mm: validate get_user_pages_fast flags")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vlastimil Babka [Fri, 31 Jan 2020 06:12:03 +0000 (22:12 -0800)]
mm/debug.c: always print flags in dump_page()
commit
5b57b8f22709f07c0ab5921c94fd66e8c59c3e11 upstream.
Commit
76a1850e4572 ("mm/debug.c: __dump_page() prints an extra line")
inadvertently removed printing of page flags for pages that are neither
anon nor ksm nor have a mapping. Fix that.
Using pr_cont() again would be a solution, but the commit explicitly
removed its use. Avoiding the danger of mixing up split lines from
multiple CPUs might be beneficial for near-panic dumps like this, so fix
this without reintroducing pr_cont().
Link: http://lkml.kernel.org/r/9f884d5c-ca60-dc7b-219c-c081c755fab6@suse.cz
Fixes:
76a1850e4572 ("mm/debug.c: __dump_page() prints an extra line")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reported-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Waiman Long [Wed, 11 Dec 2019 21:31:39 +0000 (16:31 -0500)]
locking/lockdep: Fix lockdep_stats indentation problem
commit
a030f9767da1a6bbcec840fc54770eb11c2414b6 upstream.
It was found that two lines in the output of /proc/lockdep_stats have
indentation problem:
# cat /proc/lockdep_stats
:
in-process chains: 25057
stack-trace entries: 137827 [max: 524288]
number of stack traces: 7973
number of stack hash chains: 6355
combined max dependencies:
1356414598
hardirq-safe locks: 57
hardirq-unsafe locks: 1286
:
All the numbers displayed in /proc/lockdep_stats except the two stack
trace numbers are formatted with a field with of 11. To properly align
all the numbers, a field width of 11 is now added to the two stack
trace numbers.
Fixes:
8c779229d0f4 ("locking/lockdep: Report more stack trace statistics")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lkml.kernel.org/r/20191211213139.29934-1-longman@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Hellwig [Tue, 7 Jan 2020 23:25:37 +0000 (15:25 -0800)]
xfs: clear kernel only flags in XFS_IOC_ATTRMULTI_BY_HANDLE
commit
953aa9d136f53e226448dbd801a905c28f8071bf upstream.
Don't allow passing arbitrary flags as they change behavior including
memory allocation that the call stack is not prepared for.
Fixes:
ddbca70cc45c ("xfs: allocate xattr buffer on demand")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sameer Pujar [Thu, 20 Jun 2019 15:51:59 +0000 (21:21 +0530)]
bus: tegra-aconnect: Remove PM_CLK dependency
commit
2f56acf818a08a9187ac8ec6e3d994fc13dc368d upstream.
The ACONNECT bus driver does not use pm-clk interface anymore and hence
the dependency can be removed from its Kconfig option.
Fixes:
0d7dab926130 ("bus: tegra-aconnect: use devm_clk_*() helpers")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matteo Croce [Thu, 30 Jan 2020 19:10:19 +0000 (20:10 +0100)]
netfilter: nf_flowtable: fix documentation
commit
78e06cf430934fc3768c342cbebdd1013dcd6fa7 upstream.
In the flowtable documentation there is a missing semicolon, the command
as is would give this error:
nftables.conf:5:27-33: Error: syntax error, unexpected devices, expecting newline or semicolon
hook ingress priority 0 devices = { br0, pppoe-data };
^^^^^^^
nftables.conf:4:12-13: Error: invalid hook (null)
flowtable ft {
^^
Fixes:
19b351f16fd9 ("netfilter: add flowtable documentation")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Long [Fri, 13 Dec 2019 08:53:05 +0000 (16:53 +0800)]
netfilter: nft_tunnel: no need to call htons() when dumping ports
commit
cf3e204a1ca5442190018a317d9ec181b4639bd6 upstream.
info->key.tp_src and tp_dst are __be16, when using nla_put_be16()
to dump them, htons() is not needed, so remove it in this patch.
Fixes:
af308b94a2a4 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Tue, 14 Jan 2020 19:06:02 +0000 (11:06 -0800)]
thermal: brcmstb_thermal: Do not use DT coefficients
commit
e1ff6fc22f19e2af8adbad618526b80067911d40 upstream.
At the time the brcmstb_thermal driver and its binding were merged, the
DT binding did not make the coefficients properties a mandatory one,
therefore all users of the brcmstb_thermal driver out there have a non
functional implementation with zero coefficients. Even if these
properties were provided, the formula used for computation is incorrect.
The coefficients are entirely process specific (right now, only 28nm is
supported) and not board or SoC specific, it is therefore appropriate to
hard code them in the driver given the compatibility string we are
probed with which has to be updated whenever a new process is
introduced.
We remove the existing coefficients definition since subsequent patches
are going to add support for a new process and will introduce new
coefficients as well.
Fixes:
9e03cf1b2dd5 ("thermal: add brcmstb AVS TMON driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200114190607.29339-2-f.fainelli@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Walleij [Tue, 19 Nov 2019 07:46:50 +0000 (08:46 +0100)]
thermal: db8500: Depromote debug print
commit
c56dcfa3d4d0f49f0c37cd24886aa86db7aa7f30 upstream.
We are not interested in getting this debug print on our
console all the time.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Fixes:
6c375eccded4 ("thermal: db8500: Rewrite to be a pure OF sensor")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191119074650.2664-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geert Uytterhoeven [Mon, 13 Jan 2020 10:51:56 +0000 (11:51 +0100)]
ubifs: Fix ino_t format warnings in orphan_delete()
commit
155fc6ba488a8bdfd1d3be3d7ba98c9cec2b2429 upstream.
On alpha and s390x:
fs/ubifs/debug.h:158:11: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘ino_t {aka unsigned int}’ [-Wformat=]
...
fs/ubifs/orphan.c:132:3: note: in expansion of macro ‘dbg_gen’
dbg_gen("deleted twice ino %lu", orph->inum);
...
fs/ubifs/orphan.c:140:3: note: in expansion of macro ‘dbg_gen’
dbg_gen("delete later ino %lu", orph->inum);
__kernel_ino_t is "unsigned long" on most architectures, but not on
alpha and s390x, where it is "unsigned int". Hence when printing an
ino_t, it should always be cast to "unsigned long" first.
Fix this by re-adding the recently removed casts.
Fixes:
8009ce956c3d2802 ("ubifs: Don't leak orphans on memory during commit")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Neeraj Upadhyay [Tue, 19 Nov 2019 19:50:52 +0000 (11:50 -0800)]
rcu: Allow only one expedited GP to run concurrently with wakeups
commit
4bc6b745e5cbefed92c48071e28a5f41246d0470 upstream.
The current expedited RCU grace-period code expects that a task
requesting an expedited grace period cannot awaken until that grace
period has reached the wakeup phase. However, it is possible for a long
preemption to result in the waiting task never sleeping. For example,
consider the following sequence of events:
1. Task A starts an expedited grace period by invoking
synchronize_rcu_expedited(). It proceeds normally up to the
wait_event() near the end of that function, and is then preempted
(or interrupted or whatever).
2. The expedited grace period completes, and a kworker task starts
the awaken phase, having incremented the counter and acquired
the rcu_state structure's .exp_wake_mutex. This kworker task
is then preempted or interrupted or whatever.
3. Task A resumes and enters wait_event(), which notes that the
expedited grace period has completed, and thus doesn't sleep.
4. Task B starts an expedited grace period exactly as did Task A,
complete with the preemption (or whatever delay) just before
the call to wait_event().
5. The expedited grace period completes, and another kworker
task starts the awaken phase, having incremented the counter.
However, it blocks when attempting to acquire the rcu_state
structure's .exp_wake_mutex because step 2's kworker task has
not yet released it.
6. Steps 4 and 5 repeat, resulting in overflow of the rcu_node
structure's ->exp_wq[] array.
In theory, this is harmless. Tasks waiting on the various ->exp_wq[]
array will just be spuriously awakened, but they will just sleep again
on noting that the rcu_state structure's ->expedited_sequence value has
not advanced far enough.
In practice, this wastes CPU time and is an accident waiting to happen.
This commit therefore moves the rcu_exp_gp_seq_end() call that officially
ends the expedited grace period (along with associate tracing) until
after the ->exp_wake_mutex has been acquired. This prevents Task A from
awakening prematurely, thus preventing more than one expedited grace
period from being in flight during a previous expedited grace period's
wakeup phase.
Fixes:
3b5f668e715b ("rcu: Overlap wakeups with next expedited grace period")
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
[ paulmck: Added updated comment. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Christopherson [Wed, 18 Dec 2019 21:55:06 +0000 (13:55 -0800)]
KVM: x86: Remove spurious clearing of async #PF MSR
commit
208050dac5ef4de5cb83ffcafa78499c94d0b5ad upstream.
Remove a bogus clearing of apf.msr_val from kvm_arch_vcpu_destroy().
apf.msr_val is only set to a non-zero value by kvm_pv_enable_async_pf(),
which is only reachable by kvm_set_msr_common(), i.e. by writing
MSR_KVM_ASYNC_PF_EN. KVM does not autonomously write said MSR, i.e.
can only be written via KVM_SET_MSRS or KVM_RUN. Since KVM_SET_MSRS and
KVM_RUN are vcpu ioctls, they require a valid vcpu file descriptor.
kvm_arch_vcpu_destroy() is only called if KVM_CREATE_VCPU fails, and KVM
declares KVM_CREATE_VCPU successful once the vcpu fd is installed and
thus visible to userspace. Ergo, apf.msr_val cannot be non-zero when
kvm_arch_vcpu_destroy() is called.
Fixes:
344d9588a9df0 ("KVM: Add PV MSR to enable asynchronous page faults delivery.")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Christopherson [Wed, 18 Dec 2019 21:55:05 +0000 (13:55 -0800)]
KVM: x86: Remove spurious kvm_mmu_unload() from vcpu destruction path
commit
9d979c7e6ff43ca3200ffcb74f57415fd633a2da upstream.
x86 does not load its MMU until KVM_RUN, which cannot be invoked until
after vCPU creation succeeds. Given that kvm_arch_vcpu_destroy() is
called if and only if vCPU creation fails, it is impossible for the MMU
to be loaded.
Note, the bogus kvm_mmu_unload() call was added during an unrelated
refactoring of vCPU allocation, i.e. was presumably added as an
opportunstic "fix" for a perceived leak.
Fixes:
fb3f0f51d92d1 ("KVM: Dynamically allocate vcpus")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiaochen Shen [Wed, 11 Dec 2019 20:05:05 +0000 (04:05 +0800)]
x86/resctrl: Check monitoring static key in the MBM overflow handler
commit
536a0d8e79fb928f2735db37dda95682b6754f9a upstream.
Currently, there are three static keys in the resctrl file system:
rdt_mon_enable_key and rdt_alloc_enable_key indicate if the monitoring
feature and the allocation feature are enabled, respectively. The
rdt_enable_key is enabled when either the monitoring feature or the
allocation feature is enabled.
If no monitoring feature is present (either hardware doesn't support a
monitoring feature or the feature is disabled by the kernel command line
option "rdt="), rdt_enable_key is still enabled but rdt_mon_enable_key
is disabled.
MBM is a monitoring feature. The MBM overflow handler intends to
check if the monitoring feature is not enabled for fast return.
So check the rdt_mon_enable_key in it instead of the rdt_enable_key as
former is the more accurate check.
[ bp: Massage commit message. ]
Fixes:
e33026831bdb ("x86/intel_rdt/mbm: Handle counter overflow")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1576094705-13660-1-git-send-email-xiaochen.shen@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Olsa [Mon, 13 Jan 2020 10:43:57 +0000 (11:43 +0100)]
perf ui gtk: Add missing zalloc object
commit
604e2139a1026793b8c2172bd92c7e9d039a5cf0 upstream.
When we moved zalloc.o to the library we missed gtk library which needs
it compiled in, otherwise the missing __zfree symbol will cause the
library to fail to load.
Adding the zalloc object to the gtk library build.
Fixes:
7f7c536f23e6 ("tools lib: Adopt zalloc()/zfree() from tools/perf")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jelle van der Waa <jelle@vdwaa.nl>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200113104358.123511-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaldo Carvalho de Melo [Mon, 16 Dec 2019 16:22:33 +0000 (13:22 -0300)]
perf hists browser: Restore ESC as "Zoom out" of DSO/thread/etc
commit
3f7774033e6820d25beee5cf7aefa11d4968b951 upstream.
We need to set actions->ms.map since
599a2f38a989 ("perf hists browser:
Check sort keys before hot key actions"), as in that patch we bail out
if map is NULL.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes:
599a2f38a989 ("perf hists browser: Check sort keys before hot key actions")
Link: https://lkml.kernel.org/n/tip-wp1ssoewy6zihwwexqpohv0j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Uwe Kleine-König [Mon, 11 Nov 2019 09:03:56 +0000 (10:03 +0100)]
pwm: omap-dmtimer: put_device() after of_find_device_by_node()
commit
c7cb3a1dd53f63c64fb2b567d0be130b92a44d91 upstream.
This was found by coccicheck:
drivers/pwm/pwm-omap-dmtimer.c:304:2-8: ERROR: missing put_device;
call of_find_device_by_node on line 255, but without a corresponding
object release within this function.
Reported-by: Markus Elfring <elfring@users.sourceforge.net>
Fixes:
6604c6556db9 ("pwm: Add PWM driver for OMAP using dual-mode timers")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Tue, 14 Jan 2020 18:52:39 +0000 (19:52 +0100)]
lib/vdso: Update coarse timekeeper unconditionally
commit
9f24c540f7f8eb3a981528da9a9a636a5bdf5987 upstream.
The low resolution parts of the VDSO, i.e.:
clock_gettime(CLOCK_*_COARSE), clock_getres(), time()
can be used even if there is no VDSO capable clocksource.
But if an architecture opts out of the VDSO data update then this
information becomes stale. This affects ARM when there is no architected
timer available. The lack of update causes userspace to use stale data
forever.
Make the update of the low resolution parts unconditional and only skip
the update of the high resolution parts if the architecture requests it.
Fixes:
44f57d788e7d ("timekeeping: Provide a generic update_vsyscall() implementation")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200114185946.765577901@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Tue, 14 Jan 2020 18:52:38 +0000 (19:52 +0100)]
lib/vdso: Make __arch_update_vdso_data() logic understandable
commit
9a6b55ac4a44060bcb782baf002859b2a2c63267 upstream.
The function name suggests that this is a boolean checking whether the
architecture asks for an update of the VDSO data, but it works the other
way round. To spare further confusion invert the logic.
Fixes:
44f57d788e7d ("timekeeping: Provide a generic update_vsyscall() implementation")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200114185946.656652824@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masami Hiramatsu [Wed, 27 Nov 2019 05:57:04 +0000 (14:57 +0900)]
kprobes: Set unoptimized flag after unoptimizing code
commit
f66c0447cca1281116224d474cdb37d6a18e4b5b upstream.
Set the unoptimized flag after confirming the code is completely
unoptimized. Without this fix, when a kprobe hits the intermediate
modified instruction (the first byte is replaced by an INT3, but
later bytes can still be a jump address operand) while unoptimizing,
it can return to the middle byte of the modified code, which causes
an invalid instruction exception in the kernel.
Usually, this is a rare case, but if we put a probe on the function
call while text patching, it always causes a kernel panic as below:
# echo p text_poke+5 > kprobe_events
# echo 1 > events/kprobes/enable
# echo 0 > events/kprobes/enable
invalid opcode: 0000 [#1] PREEMPT SMP PTI
RIP: 0010:text_poke+0x9/0x50
Call Trace:
arch_unoptimize_kprobe+0x22/0x28
arch_unoptimize_kprobes+0x39/0x87
kprobe_optimizer+0x6e/0x290
process_one_work+0x2a0/0x610
worker_thread+0x28/0x3d0
? process_one_work+0x610/0x610
kthread+0x10d/0x130
? kthread_park+0x80/0x80
ret_from_fork+0x3a/0x50
text_poke() is used for patching the code in optprobes.
This can happen even if we blacklist text_poke() and other functions,
because there is a small time window during which we show the intermediate
code to other CPUs.
[ mingo: Edited the changelog. ]
Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Fixes:
6274de4984a6 ("kprobes: Support delayed unoptimizing")
Link: https://lkml.kernel.org/r/157483422375.25881.13508326028469515760.stgit@devnote2
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Janne Karhunen [Wed, 15 Jan 2020 15:42:30 +0000 (17:42 +0200)]
ima: ima/lsm policy rule loading logic bug fixes
commit
483ec26eed42bf050931d9a5c5f9f0b5f2ad5f3b upstream.
Keep the ima policy rules around from the beginning even if they appear
invalid at the time of loading, as they may become active after an lsm
policy load. However, loading a custom IMA policy with unknown LSM
labels is only safe after we have transitioned from the "built-in"
policy rules to a custom IMA policy.
Patch also fixes the rule re-use during the lsm policy reload and makes
some prints a bit more human readable.
Changelog:
v4:
- Do not allow the initial policy load refer to non-existing lsm rules.
v3:
- Fix too wide policy rule matching for non-initialized LSMs
v2:
- Fix log prints
Fixes:
b16942455193 ("ima: use the lsm policy update notifier")
Cc: Casey Schaufler <casey@schaufler-ca.com>
Reported-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Janne Karhunen <janne.karhunen@gmail.com>
Signed-off-by: Konsta Karsisto <konsta.karsisto@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe JAILLET [Sun, 26 Jan 2020 10:44:29 +0000 (11:44 +0100)]
drivers: net: xgene: Fix the order of the arguments of 'alloc_etherdev_mqs()'
commit
5a44c71ccda60a50073c5d7fe3f694cdfa3ab0c2 upstream.
'alloc_etherdev_mqs()' expects first 'tx', then 'rx'. The semantic here
looks reversed.
Reorder the arguments passed to 'alloc_etherdev_mqs()' in order to keep
the correct semantic.
In fact, this is a no-op because both XGENE_NUM_[RT]X_RING are 8.
Fixes:
107dec2749fe ("drivers: net: xgene: Add support for multiple queues")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lijun Ou [Thu, 9 Jan 2020 12:10:52 +0000 (20:10 +0800)]
RDMA/hns: Bugfix for posting a wqe with sge
commit
468d020e2f02867b8ec561461a1689cd4365e493 upstream.
Driver should first check whether the sge is valid, then fill the valid
sge and the caculated total into hardware, otherwise invalid sges will
cause an error.
Fixes:
52e3b42a2f58 ("RDMA/hns: Filter for zero length of sge in hip08 kernel mode")
Fixes:
7bdee4158b37 ("RDMA/hns: Fill sq wqe context of ud type in hip08")
Link: https://lore.kernel.org/r/1578571852-13704-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yixian Liu [Tue, 10 Dec 2019 12:45:02 +0000 (20:45 +0800)]
RDMA/hns: Simplify the calculation and usage of wqe idx for post verbs
commit
4768820243d71d49f1044b3f911ac3d52bdb79af upstream.
Currently, the wqe idx is calculated repeatly everywhere it is used. This
patch defines wqe_idx and calculated it only once, then just use it as
needed.
Fixes:
2d40788825ac ("RDMA/hns: Add support for processing send wr and receive wr")
Link: https://lore.kernel.org/r/1575981902-5274-1-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Fri, 27 Dec 2019 10:44:56 +0000 (18:44 +0800)]
f2fs: fix to add swap extent correctly
commit
3e5e479a39ce9ed60cd63f7565cc1d9da77c2a4e upstream.
As Youling reported in mailing list:
https://www.linuxquestions.org/questions/linux-newbie-8/the-file-system-f2fs-is-broken-
4175666043/
https://www.linux.org/threads/the-file-system-f2fs-is-broken.26490/
There is a test case can corrupt f2fs image:
- dd if=/dev/zero of=/swapfile bs=1M count=4096
- chmod 600 /swapfile
- mkswap /swapfile
- swapon --discard /swapfile
The root cause is f2fs_swap_activate() intends to return zero value
to setup_swap_extents() to enable SWP_FS mode (swap file goes through
fs), in this flow, setup_swap_extents() setups swap extent with wrong
block address range, result in discard_swap() erasing incorrect address.
Because f2fs_swap_activate() has pinned swapfile, its data block
address will not change, it's safe to let swap to handle IO through
raw device, so we can get rid of SWAP_FS mode and initial swap extents
inside f2fs_swap_activate(), by this way, later discard_swap() can trim
in right address range.
Fixes:
4969c06a0d83 ("f2fs: support swap file w/ DIO")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cheng Jian [Fri, 13 Dec 2019 02:45:30 +0000 (10:45 +0800)]
sched/fair: Optimize select_idle_cpu
commit
60588bfa223ff675b95f866249f90616613fbe31 upstream.
select_idle_cpu() will scan the LLC domain for idle CPUs,
it's always expensive. so the next commit :
1ad3aaf3fcd2 ("sched/core: Implement new approach to scale select_idle_cpu()")
introduces a way to limit how many CPUs we scan.
But it consume some CPUs out of 'nr' that are not allowed
for the task and thus waste our attempts. The function
always return nr_cpumask_bits, and we can't find a CPU
which our task is allowed to run.
Cpumask may be too big, similar to select_idle_core(), use
per_cpu_ptr 'select_idle_mask' to prevent stack overflow.
Fixes:
1ad3aaf3fcd2 ("sched/core: Implement new approach to scale select_idle_cpu()")
Signed-off-by: Cheng Jian <cj.chengjian@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20191213024530.28052-1-cj.chengjian@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Christopherson [Thu, 9 Jan 2020 23:56:18 +0000 (15:56 -0800)]
KVM: Check for a bad hva before dropping into the ghc slow path
commit
fcfbc617547fc6d9552cb6c1c563b6a90ee98085 upstream.
When reading/writing using the guest/host cache, check for a bad hva
before checking for a NULL memslot, which triggers the slow path for
handing cross-page accesses. Because the memslot is nullified on error
by __kvm_gfn_to_hva_cache_init(), if the bad hva is encountered after
crossing into a new page, then the kvm_{read,write}_guest() slow path
could potentially write/access the first chunk prior to detecting the
bad hva.
Arguably, performing a partial access is semantically correct from an
architectural perspective, but that behavior is certainly not intended.
In the original implementation, memslot was not explicitly nullified
and therefore the partial access behavior varied based on whether the
memslot itself was null, or if the hva was simply bad. The current
behavior was introduced as a seemingly unintentional side effect in
commit
f1b9dd5eb86c ("kvm: Disallow wraparound in
kvm_gfn_to_hva_cache_init"), which justified the change with "since some
callers don't check the return code from this function, it sit seems
prudent to clear ghc->memslot in the event of an error".
Regardless of intent, the partial access is dependent on _not_ checking
the result of the cache initialization, which is arguably a bug in its
own right, at best simply weird.
Fixes:
8f964525a121 ("KVM: Allow cross page reads and writes from cached translations.")
Cc: Jim Mattson <jmattson@google.com>
Cc: Andrew Honig <ahonig@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tom Lendacky [Thu, 9 Jan 2020 23:42:16 +0000 (17:42 -0600)]
KVM: SVM: Override default MMIO mask if memory encryption is enabled
commit
52918ed5fcf05d97d257f4131e19479da18f5d16 upstream.
The KVM MMIO support uses bit 51 as the reserved bit to cause nested page
faults when a guest performs MMIO. The AMD memory encryption support uses
a CPUID function to define the encryption bit position. Given this, it is
possible that these bits can conflict.
Use svm_hardware_setup() to override the MMIO mask if memory encryption
support is enabled. Various checks are performed to ensure that the mask
is properly defined and rsvd_bits() is used to generate the new mask (as
was done prior to the change that necessitated this patch).
Fixes:
28a1f3ac1d0c ("kvm: x86: Set highest physical address bits in non-present/reserved SPTEs")
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Norris [Tue, 10 Dec 2019 00:39:11 +0000 (16:39 -0800)]
mwifiex: delete unused mwifiex_get_intf_num()
commit
1c9f329b084b7b8ea6d60d91a202e884cdcf6aae upstream.
Commit
7afb94da3cd8 ("mwifiex: update set_mac_address logic") fixed the
only user of this function, partly because the author seems to have
noticed that, as written, it's on the borderline between highly
misleading and buggy.
Anyway, no sense in keeping dead code around: let's drop it.
Fixes:
7afb94da3cd8 ("mwifiex: update set_mac_address logic")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Norris [Fri, 6 Dec 2019 19:45:35 +0000 (11:45 -0800)]
mwifiex: drop most magic numbers from mwifiex_process_tdls_action_frame()
commit
70e5b8f445fd27fde0c5583460e82539a7242424 upstream.
Before commit
1e58252e334d ("mwifiex: Fix heap overflow in
mmwifiex_process_tdls_action_frame()"),
mwifiex_process_tdls_action_frame() already had too many magic numbers.
But this commit just added a ton more, in the name of checking for
buffer overflows. That seems like a really bad idea.
Let's make these magic numbers a little less magic, by
(a) factoring out 'pos[1]' as 'ie_len'
(b) using 'sizeof' on the appropriate source or destination fields where
possible, instead of bare numbers
(c) dropping redundant checks, per below.
Regarding redundant checks: the beginning of the loop has this:
if (pos + 2 + pos[1] > end)
break;
but then individual 'case's include stuff like this:
if (pos > end - 3)
return;
if (pos[1] != 1)
return;
Note that the second 'return' (validating the length, pos[1]) combined
with the above condition (ensuring 'pos + 2 + length' doesn't exceed
'end'), makes the first 'return' (whose 'if' can be reworded as 'pos >
end - pos[1] - 2') redundant. Rather than unwind the magic numbers
there, just drop those conditions.
Fixes:
1e58252e334d ("mwifiex: Fix heap overflow in mmwifiex_process_tdls_action_frame()")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aleksa Sarai [Fri, 6 Dec 2019 14:13:26 +0000 (01:13 +1100)]
namei: only return -ECHILD from follow_dotdot_rcu()
commit
2b98149c2377bff12be5dd3ce02ae0506e2dd613 upstream.
It's over-zealous to return hard errors under RCU-walk here, given that
a REF-walk will be triggered for all other cases handling ".." under
RCU.
The original purpose of this check was to ensure that if a rename occurs
such that a directory is moved outside of the bind-mount which the
resolution started in, it would be detected and blocked to avoid being
able to mess with paths outside of the bind-mount. However, triggering a
new REF-walk is just as effective a solution.
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Fixes:
397d425dc26d ("vfs: Test for and handle paths that are unreachable from their mnt_root")
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Mon, 18 Nov 2019 04:52:47 +0000 (13:52 +0900)]
kbuild: make single target builds even faster
commit
b1fbfcb4a20949df08dd995927cdc5ad220c128d upstream.
Commit
2dffd23f81a3 ("kbuild: make single target builds much faster")
made the situation much better.
To improve it even more, apply the similar idea to the top Makefile.
Trim unrelated directories from build-dirs.
The single build code must be moved above the 'descend' target.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Wed, 16 Oct 2019 05:12:15 +0000 (14:12 +0900)]
kbuild: remove unneeded variable, single-all
commit
35e046a203ee3bc8ba9ae3561b50de02646dfb81 upstream.
When single-build is set, everything in $(MAKECMDGOALS) is a single
target. You can use $(MAKECMDGOALS) to list out the single targets.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Thu, 7 Nov 2019 07:14:41 +0000 (16:14 +0900)]
kbuild: move headers_check rule to usr/include/Makefile
commit
7ecaf069da52e472d393f03e79d721aabd724166 upstream.
Currently, some sanity checks for uapi headers are done by
scripts/headers_check.pl, which is wired up to the 'headers_check'
target in the top Makefile.
It is true compiling headers has better test coverage, but there
are still several headers excluded from the compile test. I like
to keep headers_check.pl for a while, but we can delete a lot of
code by moving the build rule to usr/include/Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Thu, 7 Nov 2019 07:14:40 +0000 (16:14 +0900)]
kbuild: remove header compile test
commit
fcbb8461fd2376ba3782b5b8bd440c929b8e4980 upstream.
There are both positive and negative options about this feature.
At first, I thought it was a good idea, but actually Linus stated a
negative opinion (https://lkml.org/lkml/2019/9/29/227). I admit it
is ugly and annoying.
The baseline I'd like to keep is the compile-test of uapi headers.
(Otherwise, kernel developers have no way to ensure the correctness
of the exported headers.)
I will maintain a small build rule in usr/include/Makefile.
Remove the other header test functionality.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[ added to 5.4.y due to start of build warnings from backported patches
because of this feature - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Ellerman [Thu, 20 Feb 2020 04:42:41 +0000 (15:42 +1100)]
selftests: Install settings files to fix TIMEOUT failures
commit
b9167c8078c3527de6da241c8a1a75a9224ed90a upstream.
Commit
852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second
timeout per test") added a 45 second timeout for tests, and also added
a way for tests to customise the timeout via a settings file.
For example the ftrace tests take multiple minutes to run, so they
were given longer in commit
b43e78f65b1d ("tracing/selftests: Turn off
timeout setting").
This works when the tests are run from the source tree. However if the
tests are installed with "make -C tools/testing/selftests install",
the settings files are not copied into the install directory. When the
tests are then run from the install directory the longer timeouts are
not applied and the tests timeout incorrectly.
So add the settings files to TEST_FILES of the appropriate Makefiles
to cause the settings files to be installed using the existing install
logic.
Fixes:
852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arthur Kiyanovski [Tue, 11 Feb 2020 15:17:49 +0000 (15:17 +0000)]
net: ena: make ena rxfh support ETH_RSS_HASH_NO_CHANGE
commit
470793a78ce344bd53d31e0c2d537f71ba957547 upstream.
As the name suggests ETH_RSS_HASH_NO_CHANGE is received upon changing
the key or indirection table using ethtool while keeping the same hash
function.
Also add a function for retrieving the current hash function from
the ena-com layer.
Fixes:
1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Saeed Bshara <saeedb@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ursula Braun [Fri, 14 Feb 2020 07:59:00 +0000 (08:59 +0100)]
net/smc: no peer ID in CLC decline for SMCD
commit
369537c97024dca99303a8d4d6ab38b4f54d3909 upstream.
Just SMCR requires a CLC Peer ID, but not SMCD. The field should be
zero for SMCD.
Fixes:
c758dfddc1b5 ("net/smc: add SMC-D support in CLC messages")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Bogdanov [Fri, 14 Feb 2020 15:44:58 +0000 (18:44 +0300)]
net: atlantic: fix out of range usage of active_vlans array
commit
5a292c89a84d49b598f8978f154bdda48b1072c0 upstream.
fix static checker warning:
drivers/net/ethernet/aquantia/atlantic/aq_filters.c:166 aq_check_approve_fvlan()
error: passing untrusted data to 'test_bit()'
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
7975d2aff5af: ("net: aquantia: add support of rx-vlan-filter offload")
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Belous [Fri, 14 Feb 2020 15:44:56 +0000 (18:44 +0300)]
net: atlantic: fix potential error handling
commit
380ec5b9af7f0d57dbf6ac067fd9f33cff2fef71 upstream.
Code inspection found that in case of mapping error we do return current
'ret' value. But beside error, it is used to count number of descriptors
allocated for the packet. In that case map_skb function could return '1'.
Changing it to return zero (number of mapped descriptors for skb)
Fixes:
018423e90bee ("net: ethernet: aquantia: Add ring support code")
Signed-off-by: Pavel Belous <pbelous@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Belous [Fri, 14 Feb 2020 15:44:55 +0000 (18:44 +0300)]
net: atlantic: fix use after free kasan warn
commit
a4980919ad6a7be548d499bc5338015e1a9191c6 upstream.
skb->len is used to calculate statistics after xmit invocation.
Under a stress load it may happen that skb will be xmited,
rx interrupt will come and skb will be freed, all before xmit function
is even returned.
Eventually, skb->len will access unallocated area.
Moving stats calculation into tx_clean routine.
Fixes:
018423e90bee ("net: ethernet: aquantia: Add ring support code")
Reported-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Pavel Belous <pbelous@marvell.com>
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nikolay Aleksandrov [Thu, 20 Feb 2020 14:42:13 +0000 (16:42 +0200)]
net: netlink: cap max groups which will be considered in netlink_bind()
commit
3a20773beeeeadec41477a5ba872175b778ff752 upstream.
Since nl_groups is a u32 we can't bind more groups via ->bind
(netlink_bind) call, but netlink has supported more groups via
setsockopt() for a long time and thus nlk->ngroups could be over 32.
Recently I added support for per-vlan notifications and increased the
groups to 33 for NETLINK_ROUTE which exposed an old bug in the
netlink_bind() code causing out-of-bounds access on archs where unsigned
long is 32 bits via test_bit() on a local variable. Fix this by capping the
maximum groups in netlink_bind() to BITS_PER_TYPE(u32), effectively
capping them at 32 which is the minimum of allocated groups and the
maximum groups which can be bound via netlink_bind().
CC: Christophe Leroy <christophe.leroy@c-s.fr>
CC: Richard Guy Briggs <rgb@redhat.com>
Fixes:
4f520900522f ("netlink: have netlink per-protocol bind function return an error code.")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexandra Winter [Thu, 20 Feb 2020 14:54:54 +0000 (15:54 +0100)]
s390/qeth: vnicc Fix EOPNOTSUPP precedence
commit
6f3846f0955308b6d1b219419da42b8de2c08845 upstream.
When getting or setting VNICC parameters, the error code EOPNOTSUPP
should have precedence over EBUSY.
EBUSY is used because vnicc feature and bridgeport feature are mutually
exclusive, which is a temporary condition.
Whereas EOPNOTSUPP indicates that the HW does not support all or parts of
the vnicc feature.
This issue causes the vnicc sysfs params to show 'blocked by bridgeport'
for HW that does not support VNICC at all.
Fixes:
caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bijan Mottahedeh [Thu, 27 Feb 2020 02:53:43 +0000 (18:53 -0800)]
nvme-pci: Hold cq_poll_lock while completing CQEs
commit
9515743bfb39c61aaf3d4f3219a645c8d1fe9a0e upstream.
Completions need to consumed in the same order the controller submitted
them, otherwise future completion entries may overwrite ones we haven't
handled yet. Hold the nvme queue's poll lock while completing new CQEs to
prevent another thread from freeing command tags for reuse out-of-order.
Fixes:
dabcefab45d3 ("nvme: provide optimized poll function for separate poll queues")
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Chen [Sat, 1 Feb 2020 06:13:44 +0000 (14:13 +0800)]
usb: charger: assign specific number for enum value
commit
ca4b43c14cd88d28cfc6467d2fa075aad6818f1d upstream.
To work properly on every architectures and compilers, the enum value
needs to be specific numbers.
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/1580537624-10179-1-git-send-email-peter.chen@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haiyang Zhang [Fri, 21 Feb 2020 16:32:18 +0000 (08:32 -0800)]
hv_netvsc: Fix unwanted wakeup in netvsc_attach()
commit
f6f13c125e05603f68f5bf31f045b95e6d493598 upstream.
When netvsc_attach() is called by operations like changing MTU, etc.,
an extra wakeup may happen while netvsc_attach() calling
rndis_filter_device_add() which sends rndis messages when queue is
stopped in netvsc_detach(). The completion message will wake up queue 0.
We can reproduce the issue by changing MTU etc., then the wake_queue
counter from "ethtool -S" will increase beyond stop_queue counter:
stop_queue: 0
wake_queue: 1
The issue causes queue wake up, and counter increment, no other ill
effects in current code. So we didn't see any network problem for now.
To fix this, initialize tx_disable to true, and set it to false when
the NIC is ready to be attached or registered.
Fixes:
7b2ee50c0cd5 ("hv_netvsc: common detach logic")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Sat, 22 Feb 2020 19:04:31 +0000 (04:04 +0900)]
kbuild: fix DT binding schema rule to detect command line changes
commit
7a04960560640ac5b0b89461f7757322b57d0c7a upstream.
This if_change_rule is not working properly; it cannot detect any
command line change.
The reason is because cmd-check in scripts/Kbuild.include compares
$(cmd_$@) and $(cmd_$1), but cmd_dtc_dt_yaml does not exist here.
For if_change_rule to work properly, the stem part of cmd_* and rule_*
must match. Because this cmd_and_fixdep invokes cmd_dtc, this rule must
be named rule_dtc.
Fixes:
4f0e3a57d6eb ("kbuild: Add support for DT binding schema checks")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>