H Hartley Sweeten [Thu, 10 Jan 2013 17:37:27 +0000 (10:37 -0700)]
staging: comedi: comedi_buf: remove unreachable dev_warn in comedi_buf_munge()
Due to the 'while(count < num_bytes)' the computed 'block_size' will
always be a value greater than 0.
Remove the unreachable dev_warn and the (block_size < 0) test.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbobbi@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 10 Jan 2013 17:36:58 +0000 (10:36 -0700)]
staging: comedi: comedi_buf: remove BUG_ON in comedi_buf_munge()
The condition that would trigger this BUG_ON can never occur.
The 'munge_count' will be equal to 'buf_write_count' if all the data
in the buffer has been munged.
Or, the 'munge_count' will be less than the 'buf_write_count' if any
partial samples in the buffer were not munged.
The 'munge_count' will never be greater than the 'buf_write_count'.
Remove the unnecessary BUG_ON.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbobbi@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 9 Jan 2013 20:32:56 +0000 (13:32 -0700)]
staging: comedi: comedi_buf: reorder exported function prototypes
For aesthetic reasons, reorder the prototypes for the exported
comedi_buf_* functions in comedidev.h to follow the function
declarations in comedi_buf.c.
Also, change a couple of the return values from 'unsigned' to
'unsigned int' to match the value actually returned.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 9 Jan 2013 20:32:18 +0000 (13:32 -0700)]
staging: comedi: comedi_buf: don't expose comedi_buf_write_n_allocated()
This helper function is only called by the comedi core in comedi_buf.c
and comedi_fops.c. For aesthetic reasons, move it to comedi_buf.c and
remove the inline. Move the prototype from comedidev.h to comedi_internal.h
so it's not exposed outside the comedi core.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 9 Jan 2013 20:31:46 +0000 (13:31 -0700)]
staging: comedi: comedi_buf: don't expose comedi_buf_read_n_allocated()
This helper function is only called in comedi_buf.c. Move it there and
make it static so it's not exposed globally.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 9 Jan 2013 20:31:16 +0000 (13:31 -0700)]
staging: comedi: comedi_buf: clarify comedi_buf_read_free()
Reword the comment about the need for the smp_mb().
Clarify the check to make sure the number of bytes to free is not
more than the number of bytes allocated.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 9 Jan 2013 20:30:49 +0000 (13:30 -0700)]
staging: comedi: comedi_buf: clarify comedi_buf_read_alloc()
Clarify the check to make sure the number of bytes to allocate is
available.
Reword the comment about the need for the smp_rmb().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 9 Jan 2013 20:30:22 +0000 (13:30 -0700)]
staging: comedi: comedi_buf: cleanup comedi_buf_read_n_available()
For aesthetic reasons, cleanup this function a bit.
Change the (async == NULL) test to simply (!async).
Reword the comment about the need for the smp_rmb()..
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 9 Jan 2013 20:29:53 +0000 (13:29 -0700)]
staging: comedi: comedi_buf: clarify comedi_buf_write_free()
Use the helper comedi_buf_write_n_allocated() to clarify the check
to make sure the number of bytes to free is not more than the number
of bytes allocated.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 9 Jan 2013 20:29:19 +0000 (13:29 -0700)]
staging: comedi: comedi_buf: cleanup comedi_buf_munge()
Refactor this function so there is a single return point and only
one BUG_ON check. The BUG_ON needs to be looked at to see if it
can be safely removed.
Clarify the test in the munge loop that checks for a block copy
that would extend pass the end of the prealloc_buf.
Reword the comment about the need for the smp_wmb().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 9 Jan 2013 20:28:20 +0000 (13:28 -0700)]
staging: comedi: comedi_buf: remove comedi_buf_write_alloc_strict
This function is only called by comedi_buf_put(). Remove it and just
call __comedi_buf_write_alloc() directly with the strict flag set.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 9 Jan 2013 20:27:48 +0000 (13:27 -0700)]
staging: comedi: comedi_buf: factor out common comedi_buf_write_alloc_* code
The only difference between comedi_buf_write_alloc() and the *_strict()
version is that the *_strict() one will only allocate the chunk if it
can completely fulfill the request.
Factor out the common code and add a flag parameter to indicate the 'strict'
usage. Change the exported functions so they are just wrappers around the
common function.
Cleanup the common function a bit and use the comedi_buf_write_n_available()
helper to determine the number of bytes available.
comedi_buf_write_n_available() is not used outside this module so make it
static. Since the only caller is __comedi_buf_write_alloc(), which will
always have a valid async pointer and already has a memory barrier, we
can remove the unnecessary (async == NULL) test as well as the smp_mb().
Also, the rounding of the sample size can be removed since the caller
does not need it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 9 Jan 2013 20:27:07 +0000 (13:27 -0700)]
staging: comedi: comedi_buf: rename comedi_reset_async_buf()
For aesthetic reasons, rename this function to comedi_buf_reset(). This
makes all the asynchronous buffer functions have the same namespace.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 9 Jan 2013 20:26:26 +0000 (13:26 -0700)]
staging: comedi: comedi_buf: factor out new buffer allocation code
The function comedi_buf_alloc() first frees any allocated buffer then,
optionally, allocates a new buffer.
Factor out the new buffer allocation code to a new function. This
allows reducing the indent level and makes the code a bit cleaner.
Also, cleanup to factored out code to make it a bit more concise.
Use a local variable for the current comedi_buf_page being allocated.
This cleans up the ugly line breaks used to keep the lines < 80 chars.
Move the #ifdef'ery for the page protection determination out of the
vmap() call.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 9 Jan 2013 20:25:54 +0000 (13:25 -0700)]
staging: comedi: comedi_buf: factor out common code to free the async buffer
The function comedi_buf_alloc() uses two loops to free the async buffer's
buf_page_list. The first one is used at the beginning to deallocate the
current buffer. The second is used to cleanup if the new buffer allocation
fails.
Factor out the common code to a new function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 9 Jan 2013 20:25:06 +0000 (13:25 -0700)]
staging: comedi: separate out comedi_buf_* functions
Create a new file, comedi_buf.c, to hold all the comedi_async buffer
functions. Currently they are all in drivers.c and really don't have
any association with that source file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 9 Jan 2013 16:46:10 +0000 (09:46 -0700)]
staging: comedi: deprecate loading firmware with comedi_config
All the comedi drivers have been converted to use the request_firmware()
hotplug interface. The COMEDI_DEVCONFIG ioctl support for passing the
firmware blob as 'aux_data' is no longer required.
Remove the feature and give the user a dev_warn message if it is
attempted.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 8 Jan 2013 13:27:48 +0000 (13:27 +0000)]
staging: comedi: (core): add comedi_dev_from_file_info()
Setting `info = comedi_file_info_from_minor(minor)` and `dev =
comedi_dev_from_minor(minor)` in the same function is a bit of a waste.
The latter function is just a call of the former followed by a
conditional return of an embedded pointer (`info->device`) or NULL. The
former function uses a spin-lock which is where the wastfulness comes
in.
Move the "followed by a conditional return of an embedded pointer" part
into a new function `comedi_dev_from_file_info` and call this instead of
`comedi_dev_from_minor()` in the places where
`comedi_file_info_from_minor()` is also called.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Omar Ramirez Luna [Thu, 10 Jan 2013 09:37:02 +0000 (03:37 -0600)]
staging: tidspbridge: remove unused code to handle iva_img
There is no way to specify the value of iva_img and since this code
is not being used, remove it.
This analysis resulted from a report by
Chen Gang <gang.chen@asianux.com>, mentioning that the existing code
was wrongly specifying the size to be copied.
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Omar Ramirez Luna [Thu, 10 Jan 2013 09:37:01 +0000 (03:37 -0600)]
staging: tidspbridge: use scm functions to set boot address and mode
Instead of ioremapping SCM registers, use the correspondent layer
to write into them.
This allows us to get rid of a layer violation, since the registers
are no longer touched by driver code.
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Omar Ramirez Luna [Thu, 10 Jan 2013 09:37:00 +0000 (03:37 -0600)]
staging: tidspbridge: fix uninitialized variable sym_name
On both counts, sym_name could be printed uninitialized, this
is solved by moving the pr_* statement to be triggered if the
value is assigned.
Reported-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Omar Ramirez Luna [Thu, 10 Jan 2013 09:36:59 +0000 (03:36 -0600)]
staging: tidspbridge: fix memory corruption on long string names
The value allocated doesn't match the one that is meant to be
stored, resulting in corruption of memory for longer strings
that can't be held in such space.
Fix by allocating the correct byte value for the string meant to
be stored.
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Omar Ramirez Luna [Thu, 10 Jan 2013 09:36:58 +0000 (03:36 -0600)]
staging: tidspbridge: fix potential array out of bounds write
The name of the firmware (drv_datap->base_img) could potentially
become equal to 255 valid characters (size of exec_file), this
will result in an out of bounds write, given that the 255 chars
along with a '\0' terminator will be copied into an array of
255 chars.
Produce an error on this cases, because the driver expects the NULL
ending to be among the 255 char limit.
Reported-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jake Champlin [Thu, 17 Jan 2013 03:16:05 +0000 (22:16 -0500)]
Staging: usbip: usbipcommon: Fixed single line bracing issue
Fixed coding style issue with single line braces.
Signed-off-by: Jake Champlin <jake.champlin.27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 9 Jan 2013 07:12:14 +0000 (10:12 +0300)]
staging: sb105x: clean up interface type test
IIR_RS232 is zero so "if (IIR_RS232 == (b_ret & IIR_RS232))" is always
true so RS232 was always chosen by default. The test should be
"if (0 == (b_ret & 0x30)) { ". The other tests should also be in that
format.
This does change how the code works... If 0x30 is set then it now
defaults to RS232 instead of RS485.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 9 Jan 2013 07:10:59 +0000 (10:10 +0300)]
staging: sb105x: move dereference under IS_ERR() check
Avoid dereverencing the ERR_PTR() by shifting the dereference down a
couple lines.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cruz Julian Bishop [Mon, 14 Jan 2013 02:29:09 +0000 (12:29 +1000)]
staging: slicoss: Fix space-related checkpatch.pl warnings
This fixes all instances of
"Please, no spaces at start of a new line"
"Please, no spaces before tabs"
Please note that I probably got the warning names wrong,
but they should be close enough for usage here :)
Additional post-commit note: There is one comment on line 230ish in slic.h
that appears to have lost it's formatting. It was fine when I was working
in Geany, but it caught my eye in the below diff. Sorry if it actually happened!
Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cruz Julian Bishop [Mon, 14 Jan 2013 02:29:08 +0000 (12:29 +1000)]
staging: slicoss: Fix three checkpatch.pl errors in slicoss.c
The errors fixed are all instances of
"ERROR: do not use assignment in if condition"
Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cruz Julian Bishop [Mon, 14 Jan 2013 02:29:07 +0000 (12:29 +1000)]
staging: slicoss: Stop swearing in slicoss.c
I'm assuming that "CRC shit reg" is referencing the CRC register/registry.
Please ignore this patch if "shit" is actually in context
Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Sun, 13 Jan 2013 20:05:05 +0000 (23:05 +0300)]
Staging: comedi: add a missing break statement
This is a static checker fix. From the context it looks like there
should be a break here.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Einon [Sun, 13 Jan 2013 20:31:16 +0000 (20:31 +0000)]
staging: et131x: Only configure regs if link state changes
Some config regs get set whenever adjust_link() is called. Change this
so that these registers only get set when the link state changes to UP.
Also remove unnecessary second assignment of boot_coma.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabio Estevam [Wed, 9 Jan 2013 15:52:30 +0000 (13:52 -0200)]
staging: ipu-di: Change DI address info to dev_dbg
Currently when ipuv3 is probed we have:
imx-ipuv3
40000000.ipu: DI0 base: 0x5e040000 remapped to
a08aa000
imx-ipuv3
40000000.ipu: DI1 base: 0x5e048000 remapped to
a08ac000
imx-ipuv3
40000000.ipu: IPUv3EX probed
The DI base address and the remapped address are more interesting for debug
purposes, so mark this message as dev_dbg instead.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 9 Jan 2013 07:09:19 +0000 (10:09 +0300)]
Staging: bcm: copying more data than intended
This was changed to bcm_flash2x_cs_info instead of bcm_flash_cs_info
when we got rid of the typedefs. bcm_flash2x_cs_info is quite a bit
larger than bcm_flash_cs_info (436 bytes instead of 96) so it would
corrupt user memory and it's an info leak.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lijo Antony [Tue, 8 Jan 2013 18:39:03 +0000 (22:39 +0400)]
Staging: speakup: kobjects.c: checkpatch.pl fixes
Fixed two "line over 80 characters" warnings reported by checkpatch.pl
Signed-off-by: Lijo Antony <lijo.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lijo Antony [Tue, 8 Jan 2013 18:39:02 +0000 (22:39 +0400)]
Staging: speakup: keyhelp.c: checkpatch.pl fixes
Breaking 2 lines to fit 80 char limit
Signed-off-by: Lijo Antony <lijo.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lijo Antony [Tue, 8 Jan 2013 18:39:01 +0000 (22:39 +0400)]
Staging: speakup: buffers.c: checkpatch.pl fixes
Fixed two camel case issues.
Signed-off-by: Lijo Antony <lijo.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cong Ding [Tue, 15 Jan 2013 19:46:50 +0000 (20:46 +0100)]
staging: omapdrm/omap_gem_dmabuf.c: fix memory leakage
There is a memory leakage in variable sg if it goes to error.
Signed-off-by: Cong Ding <dinggnu@gmail.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabio Estevam [Wed, 9 Jan 2013 02:32:02 +0000 (00:32 -0200)]
staging: imx-drm: ipu-common: Remove unused variable
Fix the following warning when building with W=1 option:
drivers/staging/imx-drm/ipu-v3/ipu-common.c: In function 'ipu_remove':
drivers/staging/imx-drm/ipu-v3/ipu-common.c:1145:19: warning: variable 'res' set but not used [-Wunused-but-set-variable]
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Gross [Wed, 19 Dec 2012 20:53:38 +0000 (14:53 -0600)]
drm/omap: Add OMAP5 support
Add support for OMAP5 processor. The main differences are that the OMAP5
has 2 containers, one for 1D and one for 2D. Each container is 128MiB in
size.
Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Gross [Wed, 19 Dec 2012 20:53:37 +0000 (14:53 -0600)]
drm/omap: Add PM capabilities
Added power management capabilities into the omapdrm and DMM drivers.
During suspend, we don't need to do anything to maintain the state of
the LUT. We have all the necessary information to recreate the mappings
of the GEM object list maintained by the omapdrm driver.
On resume, the DMM resume handler will first reprogram the LUT to point
to the dummy page. The subsequent resume handler in the omapdrm will call
into the DMM and reprogram each of the buffer objects. This will ensure
that all of the necessary objects will be pinned into the DMM properly.
Order of suspend/resume handlers is done by device creation. We create
the DMM device before the omapdrm, so the correct order is maintained.
Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devendra Naga [Tue, 8 Jan 2013 17:52:35 +0000 (12:52 -0500)]
staging: vt6655: no braces needed for single statement if , for blocks
there is only one line inside the if and for blocks, so the braces are
not needed
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devendra Naga [Tue, 8 Jan 2013 17:52:34 +0000 (12:52 -0500)]
staging: vt6655: s/kmalloc + memset / kzalloc
replace kmalloc and subsequent memset with kzalloc
and drop the null checks and casts and clean the coding style a bit too
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devendra Naga [Tue, 8 Jan 2013 17:52:33 +0000 (12:52 -0500)]
staging: vt6655: checkpatch fixes
put opening brace in a new line
4 ---> 8 spaces
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devendra Naga [Tue, 8 Jan 2013 17:52:32 +0000 (12:52 -0500)]
staging: vt6655: s/kmalloc + memset/kzalloc in alloc_rd_info
replace kmalloc and memset if the pointer is valid with kzalloc,
and remove the check around the null pointer cases as we dont need it.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Davidlohr Bueso [Fri, 4 Jan 2013 20:14:00 +0000 (12:14 -0800)]
staging: zsmalloc: comment zs_create_pool function
Just as with zs_malloc() and zs_map_object(), it is worth
formally commenting the zs_create_pool() function.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 16 Jan 2013 07:46:58 +0000 (23:46 -0800)]
Staging: zcache: delete it
Dan Magenheimer says that it is now safe to delete zcache, so quick,
before he changes his mind, drop the thing on the floor and run
screaming away.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Davidlohr Bueso [Wed, 2 Jan 2013 05:24:29 +0000 (21:24 -0800)]
staging: zram: drop zram_stat_dec/inc functions
It seems like an overkill to have adding and subtracting
1 functions from the 32bit counters. Just do it directly.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Davidlohr Bueso [Wed, 2 Jan 2013 05:24:22 +0000 (21:24 -0800)]
staging: zram: show correct disksize
The ->disksize variable stores values in units of bytes,
print the correct size in Kb
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Davidlohr Bueso [Wed, 2 Jan 2013 05:24:13 +0000 (21:24 -0800)]
staging: zram: simplify num_devices paramater
Simplify dealing with num_devices when initializing zram.
Also cleanup some of the output messages.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Khoroshilov [Fri, 11 Jan 2013 09:01:39 +0000 (13:01 +0400)]
staging: ced1401: fix GFP_KERNEL in spinlock context
Allowi() calls usb_submit_urb(pdx->pUrbCharIn, bInCallback ? GFP_ATOMIC : GFP_KERNEL)
under spin_lock_irqsave(&pdx->charInLock, flags). That means it should use GFP_ATOMIC anyway.
As soon as it is the only usage of bInCallback argument, the patch removes it at all.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Fri, 11 Jan 2013 06:55:18 +0000 (22:55 -0800)]
Staging: bcm: add a missing break statement
My static checker complains that there is a missing break statement
here. From the context, it does look like a break statement was
intended.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Hajnoczi [Fri, 11 Jan 2013 22:08:14 +0000 (23:08 +0100)]
staging: line6: avoid CamelCase POD_* enums in pod.c
Fix the following checkpatch.pl warnings:
WARNING: Avoid CamelCase: <POD_monitor_level>
#4512: FILE: staging/line6/pod.c:41:
+ POD_monitor_level = 0x04,
WARNING: Avoid CamelCase: <POD_system_invalid>
#4513: FILE: staging/line6/pod.c:42:
+ POD_system_invalid = 0x10000
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Hajnoczi [Fri, 11 Jan 2013 22:08:09 +0000 (23:08 +0100)]
staging: line6: rename MidiBuffer to avoid CamelCase
Fix checkpatch.pl warnings related to MidiBuffer:
WARNING: Avoid CamelCase: <MidiBuffer>
#947: FILE: staging/line6/driver.c:363:
+ struct MidiBuffer *mb = &line6->line6midi->midibuf_in;
Rename MidiBuffer to midi_buffer.
Note that "midibuf" would be another good name but sound/oss/midibuf.c
already uses it for a different concept. Avoid possible confusion by
using "midi_buffer" instead.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Hajnoczi [Fri, 11 Jan 2013 22:08:11 +0000 (23:08 +0100)]
staging: line6: use pr_err() instead of printk(KERN_ERR, ...)
Fix the following checkpatch.pl warning:
WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ...
#1861: FILE: staging/line6/driver.h:56:
+ printk(KERN_ERR "line6usb driver bug: missing case in %s:%d\n", \
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Hajnoczi [Fri, 11 Jan 2013 22:08:10 +0000 (23:08 +0100)]
staging: line6: wrap comment to 80 chars in driver.c
Fix the following checkpatch.pl warning:
WARNING: line over 80 characters
#1107: FILE: staging/line6/driver.c:523:
+ /* Wait for data length. We'll get a couple of 0xff until length arrives. */
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Hajnoczi [Fri, 11 Jan 2013 22:08:12 +0000 (23:08 +0100)]
staging: line6: wrap lines to 80 chars in pod.c
Fix the following checkpatch.pl warnings:
WARNING: line over 80 characters
#4508: FILE: staging/line6/pod.c:37:
+ /* POD_SYSEX_DUMPMEM2 = 0x76 */ /* dumps entire internal memory of PODxt Pro */
WARNING: line over 80 characters
#4630: FILE: staging/line6/pod.c:159:
+ if (memcmp(buf + 1, line6_midi_id, sizeof(line6_midi_id)) == 0) {
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Hajnoczi [Fri, 11 Jan 2013 22:08:13 +0000 (23:08 +0100)]
staging: line6: drop ToneportSourceInfo CamelCase name
Fix the following checkpatch.pl warning:
WARNING: Avoid CamelCase: <ToneportSourceInfo>
#5383: FILE: staging/line6/toneport.c:90:
+struct ToneportSourceInfo {
Since the struct is only used to define the global
toneport_source_info[] table, I have chosen to make the struct
anonymous and part of the table definition.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Przemo Firszt [Mon, 10 Dec 2012 23:21:25 +0000 (23:21 +0000)]
rtl8712: remove unused definitions from ethernet.h
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Przemo Firszt [Mon, 10 Dec 2012 23:21:24 +0000 (23:21 +0000)]
rtl8712: remove all NDIS_* definitions and use rndis.h instead
Remove duplicate code.The definitions are already in
include/linux/rndis.h
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Przemo Firszt [Mon, 10 Dec 2012 23:21:23 +0000 (23:21 +0000)]
rtl8712: remove unused macros
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Przemo Firszt [Mon, 10 Dec 2012 23:21:22 +0000 (23:21 +0000)]
rtl8712: replace min with min_t
I've changed the ugly casting here and used min_t() instead. I
also changed the u16 to a u32 because ->network.Ssid.SsidLength
is 32 bits. It doesn't make a difference, but truncating the
upper bits away is sloppy.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Przemo Firszt [Mon, 10 Dec 2012 23:21:21 +0000 (23:21 +0000)]
rtl8712: replace printk with better solutions
Replace printk with netdev_printk helpers, dev_printk helpers or
pr_err/warn/info if there is no device info available.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Przemo Firszt [Mon, 10 Dec 2012 23:21:20 +0000 (23:21 +0000)]
rtl8712: remove unused macros from rtl8712/wifi.h
Those definitions are not used anywhere in the kernel. If you know any
reason why they should stay in the code please speak up!
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Przemo Firszt [Mon, 10 Dec 2012 23:21:19 +0000 (23:21 +0000)]
rtl8712: code clean up
Clean some trivial formating problems in rtl8712 from staging tree. This patch
also changes the way preprocessor macros are defined to keep checkpatch.pl
quiet.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patrik Karlin [Wed, 9 Jan 2013 08:40:56 +0000 (09:40 +0100)]
staging: rtl8192u: fixed coding style issues in r8192U_core.c
This patch fixes some coding style issuses in r8192U_core.c
No logic is changed
Signed-off-by: Patrik Kårlin <patrik.karlin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patrik Karlin [Wed, 9 Jan 2013 08:40:23 +0000 (09:40 +0100)]
staging: rtl8192u: removed some non used else's
This patch removes some else blocks that has no function in the
code
Signed-off-by: Patrik Kårlin <patrik.karlin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patrik Karlin [Wed, 9 Jan 2013 08:39:44 +0000 (09:39 +0100)]
staging: rtl8192u: fixed some coding style issues in r8192U_core.c
This patch fixes some coding style issues. in r8192U_core.c
No logic is changed.
Signed-off-by: Patrik Kårlin <patrik.karlin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cyril Roelandt [Sun, 2 Dec 2012 02:40:21 +0000 (03:40 +0100)]
rtl8712: remove useless calls to memset().
These calls are followed by calls to memcpy() on the same memory area, so they
can be safely removed.
Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 7 Jan 2013 23:17:52 +0000 (15:17 -0800)]
Merge branch 'staging-linus' into staging-next
This is to get the comedi fixes, and resolve the issue in comdi_test.c
and comedi_fops.c that were caused by changes in both branches.
It also allows the fwserial driver changes to be applied, as they
required the fixes that are in staging-linus.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Omar Ramirez Luna [Mon, 24 Dec 2012 14:10:25 +0000 (08:10 -0600)]
staging: tidspbridge: use prepare/unprepare on dsp clocks
This solves runtime failures while trying to enable WDT3 related
functionality on firmware load, however it does affect other clocks
controlled by the driver. Seen on 3.8-rc1.
CCF provides clk_prepare and clk_unprepare for enable and disable
operations respectively, this needs to be called in the correct
order while handling clocks.
Code path to enable/disable dsp clocks can still be reached from an
atomic context, hence we can't use clk_prepare_enable and
clk_disable_unprepare yet.
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enric Balletbo i Serra [Wed, 19 Dec 2012 09:48:46 +0000 (10:48 +0100)]
staging: tidspbridge: Fix build breakage due to splitting CM functions.
Commit ff4ae5d (ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files)
resulted in a build breakage for tidspbridge driver.
...
CC [M] drivers/staging/tidspbridge/core/tiomap3430.o
staging/tidspbridge/core/tiomap3430.c: In function ‘bridge_brd_start’:
staging/tidspbridge/core/tiomap3430.c:550:24: error: ‘OMAP3430_CM_AUTOIDLE_PLL’
undeclared (first use in this function)
make[3]: *** [drivers/staging/tidspbridge/core/tiomap3430.o] Error 1
...
Fix this by including the appropriate header file.
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cruz Julian Bishop [Fri, 21 Dec 2012 23:00:46 +0000 (09:00 +1000)]
staging: android: Add some Kconfig help entries
This commit adds Kconfig entries for the following:
1: ANDROID_BINDER_IPC
2: ASHMEM (additional text)
3: ANDROID_LOGGER
It also changes "Register" to "Registers" in
ANDROID_LOW_MEMORY_KILLER
Finally, all "help" instances are changed to "---help---",
as recommended by kconfig-language.txt in order to visually
aid developers.
Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cruz Julian Bishop [Fri, 21 Dec 2012 23:00:45 +0000 (09:00 +1000)]
staging: android: Fix two checkpatch issues in binder.c
This fixes two instances of
"static const char * array should probably be static const char * const"
I have seen other commits doing this in other files, so I am
assuming it should be done here as well.
Please tell me if this is wrong :)
Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cruz Julian Bishop [Fri, 21 Dec 2012 23:00:44 +0000 (09:00 +1000)]
staging: android: Avoid using camelcase in binder.h
This changes the following:
1: BinderDriverReturnProtocol -> binder_driver_return_protocol
2: BinderDriverCommandProtocol -> binder_driver_return_protocol
These enums are not currently used, but still generate noise in checkpatch.
Well, did. They don't now :)
Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Huewe [Mon, 7 Jan 2013 22:09:53 +0000 (23:09 +0100)]
staging/csr: Fix dereference before check
Smatch complains about some pointers that are dereferenced before being
checked:
drivers/staging/csr/sme_sys.c:285
CsrWifiRouterCtrlHipReqHandler() warn: variable dereferenced before
check 'priv' (see line 283)
drivers/staging/csr/sme_sys.c:1503
CsrWifiRouterMaPacketReqHandler() warn: variable dereferenced before
check 'priv' (see line 1501)
drivers/staging/csr/sme_sys.c:2062
CsrWifiRouterCtrlPeerDelReqHandler() warn: variable dereferenced before
check 'priv' (see line 2059)
drivers/staging/csr/sme_sys.c:2477
CsrWifiRouterCtrlPeerAddReqHandler() warn: variable dereferenced before
check 'priv' (see line 2474)
drivers/staging/csr/sme_sys.c:3045
CsrWifiRouterCtrlWapiRxPktReqHandler() warn: variable dereferenced
before check 'priv' (see line 3039)
We put the check before the dereferencing and prevent an oops and fix
the warning.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masanari Iida [Mon, 7 Jan 2013 14:28:10 +0000 (23:28 +0900)]
staging: Add angle bracket before and after the URL
Add missing angle bracket before and after the URL.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masanari Iida [Mon, 7 Jan 2013 14:38:35 +0000 (23:38 +0900)]
staging: vme: Fix URL in Kconfig
The URL vmelinux.org is not accessible.
Change it to www.vmelinux.org.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cyril Roelandt [Tue, 11 Dec 2012 00:20:48 +0000 (01:20 +0100)]
staging: rtl8712: avoid a useless call to memset().
In r8711_wx_get_wap(), make sure we do not call memcpy() on a memory area that
has just been zeroed by a call to memset().
Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cyril Roelandt [Wed, 12 Dec 2012 00:24:50 +0000 (01:24 +0100)]
staging: omap-thermal: fix error check in omap_thermal_expose_sensor() and in omap_thermal_register_cpu_cooling().
The omap_bandgap_get_sensor_data() function returns ERR_PTR(), so we need to use
IS_ERR() rather than a NULL check.
Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 20 Dec 2012 00:49:24 +0000 (17:49 -0700)]
staging: comedi: Makefile: conditionally compile multi-file core module
Instead of using the #ifdef'ery in the comedi_compat32.c and proc.c
files to include/exclude them from the comedi core, modify the Makefile
to include those files automatically when enabled in the .config.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 4 Jan 2013 11:33:21 +0000 (11:33 +0000)]
staging: comedi: comedi_test: fix race when cancelling command
Éric Piel reported a kernel oops in the "comedi_test" module. It was a
NULL pointer dereference within `waveform_ai_interrupt()` (actually a
timer function) that sometimes occurred when a running asynchronous
command is cancelled (either by the `COMEDI_CANCEL` ioctl or by closing
the device file).
This seems to be a race between the caller of `waveform_ai_cancel()`
which on return from that function goes and tears down the running
command, and the timer function which uses the command. In particular,
`async->cmd.chanlist` gets freed (and the pointer set to NULL) by
`do_become_nonbusy()` in "comedi_fops.c" but a previously scheduled
`waveform_ai_interrupt()` timer function will dereference that pointer
regardless, leading to the oops.
Fix it by replacing the `del_timer()` call in `waveform_ai_cancel()`
with `del_timer_sync()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reported-by: Éric Piel <piel@delmic.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 3 Jan 2013 12:15:26 +0000 (12:15 +0000)]
staging: comedi: Kconfig: COMEDI_NI_AT_A2150 should select COMEDI_FC
The 'ni_at_a2150' module links to `cfc_write_to_buffer` in the
'comedi_fc' module, so selecting 'COMEDI_NI_AT_A2150' in the kernel config
needs to also select 'COMEDI_FC'.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@vger.kernel.org> # 3.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lijo Antony [Sat, 5 Jan 2013 14:12:54 +0000 (18:12 +0400)]
Staging: comedi: addi_common.c: checkpatch.pl fixes
checkpatch.pl style fixes:
- Broken license text into 80 char lines
- fixed two space before tab issues
- Removed unnecessary braces from if-else
Signed-off-by: Lijo Antony <lijo.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 4 Jan 2013 11:33:26 +0000 (11:33 +0000)]
staging: comedi: comedi_test: whitespace fixes
Fix lines over 80 characters and line up nearby comments.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 4 Jan 2013 11:33:25 +0000 (11:33 +0000)]
staging: comedi: comedi_test: tidy up waveform_ai_interrupt()
Use a local variable to reduce the indentation in
`waveform_ai_interrupt()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 4 Jan 2013 11:33:24 +0000 (11:33 +0000)]
staging: comedi: comedi_test: make samples unsigned
Represent the fake samples as unsigned shorts instead of signed shorts,
as this is the usual Comedi convention. There is no change to the
actual binary representation, although the `cfc_write_to_buffer()` call
currently expects a signed short for some bizarre reason.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 4 Jan 2013 11:33:23 +0000 (11:33 +0000)]
staging: comedi: comedi_test: change end-of-acquisition test
In the "comedi_test" module's acquisition timer function
`waveform_ai_interrupt()`, move the code for ending the acquisition
outside the scan loop. Determine if the number of scans to be done is
sufficient to end the acquisition before entering the scan loop. On
leaving the scan loop, set the `COMEDI_CB_EOA` event if the acquisition
is ending. Only reschedule the timer if the acquisition is not ending.
Remove the somewhat useless `timer_running` flag from the private data.
This was intended to stop the timer function adding the timer back on
the timer queue periodically, but the flag setting wasn't synchronized
with the timer and we already use `del_timer_sync()` to synchronize
removal from the queue.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 4 Jan 2013 11:33:22 +0000 (11:33 +0000)]
staging: comedi: comedi_test: remove unnecessary del_timer() call
In the "comedi_test" module, the timer function
`waveform_ai_interrupt()` doesn't need to remove the timer from the
timer queue as the caller has already removed it from the queue. Remove
the call to `del_timer()` in this function.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 4 Jan 2013 11:33:21 +0000 (11:33 +0000)]
staging: comedi: comedi_test: fix race when cancelling command
Éric Piel reported a kernel oops in the "comedi_test" module. It was a
NULL pointer dereference within `waveform_ai_interrupt()` (actually a
timer function) that sometimes occurred when a running asynchronous
command is cancelled (either by the `COMEDI_CANCEL` ioctl or by closing
the device file).
This seems to be a race between the caller of `waveform_ai_cancel()`
which on return from that function goes and tears down the running
command, and the timer function which uses the command. In particular,
`async->cmd.chanlist` gets freed (and the pointer set to NULL) by
`do_become_nonbusy()` in "comedi_fops.c" but a previously scheduled
`waveform_ai_interrupt()` timer function will dereference that pointer
regardless, leading to the oops.
Fix it by replacing the `del_timer()` call in `waveform_ai_cancel()`
with `del_timer_sync()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reported-by: Éric Piel <piel@delmic.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lijo Antony [Tue, 1 Jan 2013 18:41:06 +0000 (22:41 +0400)]
Staging: comedi: comedidev.h: fixed a camel case
Fixed a camel case issue.
Signed-off-by: Lijo Antony <lijo.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 20 Dec 2012 00:27:02 +0000 (17:27 -0700)]
staging: comedi: store the 'index' for each subdevice
Store the 'index' for each comedi_subdevice when they are initially
allocated by comedi_alloc_subdevice(). This allows removing the
pointer math in comedi_fops.c which is used to figure out the
index that user space uses to access the individual subdevices.
Fix the ni_mio_common driver so it also uses the 'index' instead
of doing the pointer math.
Also, remove a couple unused macros in the pcmda12, pcmmio, and
pcmuio drivers which also do the pointer math to figure out the
index.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 19 Dec 2012 22:45:34 +0000 (15:45 -0700)]
staging: comedi: comedi_fops: use kzalloc in comedi_alloc_subdevice_minor()
The hardware_device member of comedi_file_info is not set in this
function. Use kzalloc to make sure this pointer does not contain
invalid data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 19 Dec 2012 22:45:12 +0000 (15:45 -0700)]
staging: comedi: comedi_fops: cleanup comedi_mmap()
Use comedi_dev_from_minor() to simplify the return -ENODEV tests.
Change the (foo == NULL) tests to simply (!foo).
Use a local variable to hold a pointer to the async->buf_page_list[]
when doing the remap_pfn_range(). This cleans up the ugly line breaks
for the page_to_pfn(virt_to_page(...) operation.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 19 Dec 2012 22:44:46 +0000 (15:44 -0700)]
staging: comedi: comedi_fops: cleanup comedi_{read, write}_subdevice()
Flip the info->device tests so than the return NULL occurs last.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 19 Dec 2012 22:44:24 +0000 (15:44 -0700)]
staging: comedi: comedi_fops: introduce comedi_is_subdevice_idle()
Introduce, and use, a helper to check the subdevice runflags to see if
it is not in error and not running.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 19 Dec 2012 22:44:02 +0000 (15:44 -0700)]
staging: comedi: comedi_fops: introduce comedi_is_subdevice_in_error()
Introduce, and use, a helper to check the subdevice runflags to see if
the SRF_ERROR flag is set.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 19 Dec 2012 22:43:40 +0000 (15:43 -0700)]
staging: comedi: comedi_fops: don't export comedi_get_subdevice_runflags()
The subdevice runflags are protected with a spin_lock. Only the comedi
core should be accessing them directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 19 Dec 2012 22:43:18 +0000 (15:43 -0700)]
staging: comedi: use comedi_is_subdevice_running()
Use the helper function comedi_is_subdevice_running() instead of getting
the subdevice runflags and then masking the result.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 19 Dec 2012 22:42:47 +0000 (15:42 -0700)]
staging: comedi: comedi_fops: introduce comedi_is_subdevice_running()
Introduce a helper function that checks the subdevice runflags to
see if the subdevice is running a command.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 19 Dec 2012 22:42:26 +0000 (15:42 -0700)]
staging: comedi: comedi_fops: move comedi_get_subdevice_runflags()
For aesthetic reasons, move this function so its near
comedi_set_subdevice_runflags().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>