review.tizen.org Git - platform/kernel/linux-starfive.git/log

media: usb: Check az6007_read() return value

[ Upstream commit fdaca63186f59fc664b346c45b76576624b48e57 ]

If az6007_read() returns error, there is no sence to continue.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 3af2f4f15a61 ("[media] az6007: Change the az6007 read/write routine parameter")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-qcm2290: Mark RCGs shared where applicable

[ Upstream commit 7bf654a0d95e75b415f454e10627309d650762d0 ]

The vast majority of shared RCGs were not marked as such. Fix it.

Fixes: 496d1a13d405 ("clk: qcom: Add Global Clock Controller driver for QCM2290")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230403174807.345185-1-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-ipq6018: Use floor ops for sdcc clocks

[ Upstream commit 56e5ae0116aef87273cf1812d608645b076e4f02 ]

SDCC clocks must be rounded down to avoid overclocking the controller.

Fixes: d9db07f088af ("clk: qcom: Add ipq6018 Global Clock Controller support")
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1682413909-24927-1-git-send-email-mantas@8devices.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: camcc-sc7180: Add parent dependency to all camera GDSCs

[ Upstream commit 3e4d179532423f299554cd0dedabdd9d2fdd238d ]

Camera titan top GDSC is a parent supply to all other camera GDSCs. Titan
top GDSC is required to be enabled before enabling any other camera GDSCs
and it should be disabled only after all other camera GDSCs are disabled.
Ensure this behavior by marking titan top GDSC as parent of all other
camera GDSCs.

Fixes: 15d09e830bbc ("clk: qcom: camcc: Add camera clock controller driver for SC7180")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230501142932.13049-1-quic_tdas@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: mmcc-msm8974: remove oxili_ocmemgx_clk

[ Upstream commit 853c064b57491d739bfd0cc35ff75c5ea9c5e8f5 ]

After the internal discussions, it looks like this clock is managed by
RPM itself. Linux kernel should not touch it on its own, as this causes
disagreement with RPM. Shutting down this clock causes the OCMEM<->GPU
interface to stop working, resulting in GPU hangchecks/timeouts.

Fixes: d8b212014e69 ("clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)")
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230508153319.2371645-1-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250: omap: Fix freeing of resources on failed register

[ Upstream commit b9ab22c2bc8652324a803b3e2be69838920b4025 ]

If serial8250_register_8250_port() fails, the SoC can hang as the
deferred PMQoS work will still run as is not flushed and removed.

Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230508082014.23083-2-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: Fix some error handling paths

[ Upstream commit ada050c69108bc34be13ecc11f7fad0f20ebadc4 ]

dwc2_driver_probe() calls dwc2_lowlevel_hw_init() which deassert some reset
lines.
Should an error happen in dwc2_lowlevel_hw_init() after calling
reset_control_deassert() or in the probe after calling
dwc2_lowlevel_hw_init(), the reset lines remain deasserted.

Add some devm_add_action_or_reset() calls to re-assert the lines if needed.

Update the remove function accordingly.

This change is compile-tested only.

Fixes: 83f8da562f8b ("usb: dwc2: Add reset control to dwc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/c64537b5339342bd00f7c2152b8fc23792b9f95a.1683306479.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: platform: Improve error reporting for problems during .remove()

[ Upstream commit 55f223b8b408cbfd85fb1c5b74ab85ccab319a69 ]

Returning an error value in a platform driver's remove callback results in
a generic error message being emitted by the driver core, but otherwise it
doesn't make a difference. The device goes away anyhow.

For each case where ret is non-zero the driver already emits an error
message, so suppress the generic error message by returning zero
unconditionally. (Side note: The return value handling was unreliable
anyhow as the value returned by dwc2_exit_hibernation() was overwritten
anyhow if hsotg->in_ppd was non-zero.)

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Link: https://lore.kernel.org/r/20221017195914.1426297-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: ada050c69108 ("usb: dwc2: Fix some error handling paths")
Signed-off-by: Sasha Levin <sashal@kernel.org>

sh: j2: Use ioremap() to translate device tree address into kernel memory

[ Upstream commit bc9d1f0cecd2407cfb2364a7d4be2f52d1d46a9d ]

Addresses the following warning when building j2_defconfig:

arch/sh/kernel/cpu/sh2/probe.c: In function 'scan_cache':
arch/sh/kernel/cpu/sh2/probe.c:24:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
24 | j2_ccr_base = (u32 __iomem *)of_flat_dt_translate_address(node);
|

Fixes: 5a846abad07f ("sh: add support for J-Core J2 processor")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Rob Landley <rob@landley.net>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230503125746.331835-1-glaubitz@physik.fu-berlin.de
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: do not allow to defragment files have FI_COMPRESS_RELEASED

[ Upstream commit 7cd2e5f75b86a1befa99834f3ed1d735eeff69e6 ]

If a file has FI_COMPRESS_RELEASED, all writes for it should not be
allowed.

Fixes: 5fdb322ff2c2 ("f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE")
Signed-off-by: Qi Han <hanqi@vivo.com>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: power: reset: qcom-pon: Only allow reboot-mode pre-pmk8350

[ Upstream commit d41dab4c031edaa460a484113394327aa52dc0bd ]

As pointed out by Shazad [1], PMICs using a separate HLOS+PBS scheme
(so PMK8350 and newer) are expected to pass reboot mode data through SDAM,
as the reboot mode registers are absent in the HLOS reg space.

Limit the reboot-mode.yaml inclusion to PMICs without a separate PBS
region.

[1] https://lore.kernel.org/linux-arm-msm/12f13183-c381-25f7-459e-62e0c2b19498@quicinc.com/

Fixes: 03fccdc76dce ("dt-bindings: power: reset: qcom-pon: Add new compatible "qcom,pmk8350-pon"")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

w1: fix loop in w1_fini()

[ Upstream commit 83f3fcf96fcc7e5405b37d9424c7ef26bfa203f8 ]

The __w1_remove_master_device() function calls:

list_del(&dev->w1_master_entry);

So presumably this can cause an endless loop.

Fixes: 7785925dd8e0 ("[PATCH] w1: cleanups.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

w1: w1_therm: fix locking behavior in convert_t

[ Upstream commit dca5480ab7b77a889088ab7cac81934604510ac7 ]

The commit 67b392f7b8ed ("w1_therm: optimizing temperature read timings")
accidentially inverted the logic for lock handling of the bus mutex.

Before:
  pullup -> release lock before sleep
  no pullup -> release lock after sleep

After:
  pullup -> release lock after sleep
  no pullup -> release lock before sleep

This cause spurious measurements of 85 degree (powerup value) on the
Tarragon board with connected 1-w temperature sensor
(w1_therm.w1_strong_pull=0).

In the meantime a new feature for polling the conversion
completion has been integrated in these branches with
commit 021da53e65fd ("w1: w1_therm: Add sysfs entries to control
conversion time and driver features"). But this feature isn't
available for parasite power mode, so handle this separately.

Link: https://lore.kernel.org/regressions/2023042645-attentive-amends-7b0b@gregkh/T/
Fixes: 67b392f7b8ed ("w1_therm: optimizing temperature read timings")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20230427112152.12313-1-stefan.wahren@i2se.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Fix UAF in svc_tcp_listen_data_ready()

commit fc80fc2d4e39137869da3150ee169b40bf879287 upstream.

After the listener svc_sock is freed, and before invoking svc_tcp_accept()
for the established child sock, there is a window that the newsock
retaining a freed listener svc_sock in sk_user_data which cloning from
parent. In the race window, if data is received on the newsock, we will
observe use-after-free report in svc_tcp_listen_data_ready().

Reproduce by two tasks:

1. while :; do rpc.nfsd 0 ; rpc.nfsd; done
2. while :; do echo "" | ncat -4 127.0.0.1 2049 ; done

KASAN report:

  ==================================================================
  BUG: KASAN: slab-use-after-free in svc_tcp_listen_data_ready+0x1cf/0x1f0 [sunrpc]
  Read of size 8 at addr ffff888139d96228 by task nc/102553
  CPU: 7 PID: 102553 Comm: nc Not tainted 6.3.0+ #18
  Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
  Call Trace:
   <IRQ>
   dump_stack_lvl+0x33/0x50
   print_address_description.constprop.0+0x27/0x310
   print_report+0x3e/0x70
   kasan_report+0xae/0xe0
   svc_tcp_listen_data_ready+0x1cf/0x1f0 [sunrpc]
   tcp_data_queue+0x9f4/0x20e0
   tcp_rcv_established+0x666/0x1f60
   tcp_v4_do_rcv+0x51c/0x850
   tcp_v4_rcv+0x23fc/0x2e80
   ip_protocol_deliver_rcu+0x62/0x300
   ip_local_deliver_finish+0x267/0x350
   ip_local_deliver+0x18b/0x2d0
   ip_rcv+0x2fb/0x370
   __netif_receive_skb_one_core+0x166/0x1b0
   process_backlog+0x24c/0x5e0
   __napi_poll+0xa2/0x500
   net_rx_action+0x854/0xc90
   __do_softirq+0x1bb/0x5de
   do_softirq+0xcb/0x100
   </IRQ>
   <TASK>
   ...
   </TASK>

  Allocated by task 102371:
   kasan_save_stack+0x1e/0x40
   kasan_set_track+0x21/0x30
   __kasan_kmalloc+0x7b/0x90
   svc_setup_socket+0x52/0x4f0 [sunrpc]
   svc_addsock+0x20d/0x400 [sunrpc]
   __write_ports_addfd+0x209/0x390 [nfsd]
   write_ports+0x239/0x2c0 [nfsd]
   nfsctl_transaction_write+0xac/0x110 [nfsd]
   vfs_write+0x1c3/0xae0
   ksys_write+0xed/0x1c0
   do_syscall_64+0x38/0x90
   entry_SYSCALL_64_after_hwframe+0x72/0xdc

  Freed by task 102551:
   kasan_save_stack+0x1e/0x40
   kasan_set_track+0x21/0x30
   kasan_save_free_info+0x2a/0x50
   __kasan_slab_free+0x106/0x190
   __kmem_cache_free+0x133/0x270
   svc_xprt_free+0x1e2/0x350 [sunrpc]
   svc_xprt_destroy_all+0x25a/0x440 [sunrpc]
   nfsd_put+0x125/0x240 [nfsd]
   nfsd_svc+0x2cb/0x3c0 [nfsd]
   write_threads+0x1ac/0x2a0 [nfsd]
   nfsctl_transaction_write+0xac/0x110 [nfsd]
   vfs_write+0x1c3/0xae0
   ksys_write+0xed/0x1c0
   do_syscall_64+0x38/0x90
   entry_SYSCALL_64_after_hwframe+0x72/0xdc

Fix the UAF by simply doing nothing in svc_tcp_listen_data_ready()
if state != TCP_LISTEN, that will avoid dereferencing svsk for all
child socket.

Link: https://lore.kernel.org/lkml/20230507091131.23540-1-dinghui@sangfor.com.cn/
Fixes: fa9251afc33c ("SUNRPC: Call the default socket callbacks instead of open coding")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix race when deleting free space root from the dirty cow roots list

commit babebf023e661b90b1c78b2baa384fb03a226879 upstream.

When deleting the free space tree we are deleting the free space root
from the list fs_info->dirty_cowonly_roots without taking the lock that
protects it, which is struct btrfs_fs_info::trans_lock.
This unsynchronized list manipulation may cause chaos if there's another
concurrent manipulation of this list, such as when adding a root to it
with ctree.c:add_root_to_dirty_list().

This can result in all sorts of weird failures caused by a race, such as
the following crash:

  [337571.278245] general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] PREEMPT SMP PTI
  [337571.278933] CPU: 1 PID: 115447 Comm: btrfs Tainted: G        W          6.4.0-rc6-btrfs-next-134+ #1
  [337571.279153] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
  [337571.279572] RIP: 0010:commit_cowonly_roots+0x11f/0x250 [btrfs]
  [337571.279928] Code: 85 38 06 00 (...)
  [337571.280363] RSP: 0018:ffff9f63446efba0 EFLAGS: 00010206
  [337571.280582] RAX: ffff942d98ec2638 RBX: ffff9430b82b4c30 RCX: 0000000449e1c000
  [337571.280798] RDX: dead000000000100 RSI: ffff9430021e4900 RDI: 0000000000036070
  [337571.281015] RBP: ffff942d98ec2000 R08: ffff942d98ec2000 R09: 000000000000015b
  [337571.281254] R10: 0000000000000009 R11: 0000000000000001 R12: ffff942fe8fbf600
  [337571.281476] R13: ffff942dabe23040 R14: ffff942dabe20800 R15: ffff942d92cf3b48
  [337571.281723] FS:  00007f478adb7340(0000) GS:ffff94349fa40000(0000) knlGS:0000000000000000
  [337571.281950] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [337571.282184] CR2: 00007f478ab9a3d5 CR3: 000000001e02c001 CR4: 0000000000370ee0
  [337571.282416] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [337571.282647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [337571.282874] Call Trace:
  [337571.283101]  <TASK>
  [337571.283327]  ? __die_body+0x1b/0x60
  [337571.283570]  ? die_addr+0x39/0x60
  [337571.283796]  ? exc_general_protection+0x22e/0x430
  [337571.284022]  ? asm_exc_general_protection+0x22/0x30
  [337571.284251]  ? commit_cowonly_roots+0x11f/0x250 [btrfs]
  [337571.284531]  btrfs_commit_transaction+0x42e/0xf90 [btrfs]
  [337571.284803]  ? _raw_spin_unlock+0x15/0x30
  [337571.285031]  ? release_extent_buffer+0x103/0x130 [btrfs]
  [337571.285305]  reset_balance_state+0x152/0x1b0 [btrfs]
  [337571.285578]  btrfs_balance+0xa50/0x11e0 [btrfs]
  [337571.285864]  ? __kmem_cache_alloc_node+0x14a/0x410
  [337571.286086]  btrfs_ioctl+0x249a/0x3320 [btrfs]
  [337571.286358]  ? mod_objcg_state+0xd2/0x360
  [337571.286577]  ? refill_obj_stock+0xb0/0x160
  [337571.286798]  ? seq_release+0x25/0x30
  [337571.287016]  ? __rseq_handle_notify_resume+0x3ba/0x4b0
  [337571.287235]  ? percpu_counter_add_batch+0x2e/0xa0
  [337571.287455]  ? __x64_sys_ioctl+0x88/0xc0
  [337571.287675]  __x64_sys_ioctl+0x88/0xc0
  [337571.287901]  do_syscall_64+0x38/0x90
  [337571.288126]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
  [337571.288352] RIP: 0033:0x7f478aaffe9b

So fix this by locking struct btrfs_fs_info::trans_lock before deleting
the free space root from that list.

Fixes: a5ed91828518 ("Btrfs: implement the free space B-tree")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: increment diskseq on all media change events

commit b90ecc0379eb7bbe79337b0c7289390a98752646 upstream.

Currently, associating a loop device with a different file descriptor
does not increment its diskseq.  This allows the following race
condition:

1. Program X opens a loop device
2. Program X gets the diskseq of the loop device.
3. Program X associates a file with the loop device.
4. Program X passes the loop device major, minor, and diskseq to
   something.
5. Program X exits.
6. Program Y detaches the file from the loop device.
7. Program Y attaches a different file to the loop device.
8. The opener finally gets around to opening the loop device and checks
   that the diskseq is what it expects it to be.  Even though the
   diskseq is the expected value, the result is that the opener is
   accessing the wrong file.

From discussions with Christoph Hellwig, it appears that
disk_force_media_change() was supposed to call inc_diskseq(), but in
fact it does not.  Adding a Fixes: tag to indicate this.  Christoph's
Reported-by is because he stated that disk_force_media_change()
calls inc_diskseq(), which is what led me to discover that it should but
does not.

Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Fixes: e6138dc12de9 ("block: add a helper to raise a media changed event")
Cc: stable@vger.kernel.org # 5.15+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230607170837.1559-1-demi@invisiblethingslab.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: change all __u32 annotations to __be32 in affs_hardblocks.h

commit 95a55437dc49fb3342c82e61f5472a71c63d9ed0 upstream.

The Amiga partition parser module uses signed int for partition sector
address and count, which will overflow for disks larger than 1 TB.

Use u64 as type for sector address and size to allow using disks up to
2 TB without LBD support, and disks larger than 2 TB with LBD. The RBD
format allows to specify disk sizes up to 2^128 bytes (though native
OS limitations reduce this somewhat, to max 2^68 bytes), so check for
u64 overflow carefully to protect against overflowing sector_t.

This bug was reported originally in 2012, and the fix was created by
the RDB author, Joanne Dow <jdow@earthlink.net>. A patch had been
discussed and reviewed on linux-m68k at that time but never officially
submitted (now resubmitted as patch 1 of this series).

Patch 3 (this series) adds additional error checking and warning
messages. One of the error checks now makes use of the previously
unused rdb_CylBlocks field, which causes a 'sparse' warning
(cast to restricted __be32).

Annotate all 32 bit fields in affs_hardblocks.h as __be32, as the
on-disk format of RDB and partition blocks is always big endian.

Reported-by: Martin Steigerwald <Martin@lichtvoll.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=43511
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Message-ID: <201206192146.09327.Martin@lichtvoll.de>
Cc: <stable@vger.kernel.org> # 5.2
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230620201725.7020-3-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: add overflow checks for Amiga partition support

commit b6f3f28f604ba3de4724ad82bea6adb1300c0b5f upstream.

The Amiga partition parser module uses signed int for partition sector
address and count, which will overflow for disks larger than 1 TB.

Use u64 as type for sector address and size to allow using disks up to
2 TB without LBD support, and disks larger than 2 TB with LBD. The RBD
format allows to specify disk sizes up to 2^128 bytes (though native
OS limitations reduce this somewhat, to max 2^68 bytes), so check for
u64 overflow carefully to protect against overflowing sector_t.

Bail out if sector addresses overflow 32 bits on kernels without LBD
support.

This bug was reported originally in 2012, and the fix was created by
the RDB author, Joanne Dow <jdow@earthlink.net>. A patch had been
discussed and reviewed on linux-m68k at that time but never officially
submitted (now resubmitted as patch 1 in this series).
This patch adds additional error checking and warning messages.

Reported-by: Martin Steigerwald <Martin@lichtvoll.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=43511
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Message-ID: <201206192146.09327.Martin@lichtvoll.de>
Cc: <stable@vger.kernel.org> # 5.2
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/r/20230620201725.7020-4-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: fix signed int overflow in Amiga partition support

commit fc3d092c6bb48d5865fec15ed5b333c12f36288c upstream.

The Amiga partition parser module uses signed int for partition sector
address and count, which will overflow for disks larger than 1 TB.

Use sector_t as type for sector address and size to allow using disks
up to 2 TB without LBD support, and disks larger than 2 TB with LBD.

This bug was reported originally in 2012, and the fix was created by
the RDB author, Joanne Dow <jdow@earthlink.net>. A patch had been
discussed and reviewed on linux-m68k at that time but never officially
submitted. This patch differs from Joanne's patch only in its use of
sector_t instead of unsigned int. No checking for overflows is done
(see patch 3 of this series for that).

Reported-by: Martin Steigerwald <Martin@lichtvoll.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=43511
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Message-ID: <201206192146.09327.Martin@lichtvoll.de>
Cc: <stable@vger.kernel.org> # 5.2
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Martin Steigerwald <Martin@lichtvoll.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230620201725.7020-2-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Fix potential data race at PCM memory allocation helpers

commit bd55842ed998a622ba6611fe59b3358c9f76773d upstream.

The PCM memory allocation helpers have a sanity check against too many
buffer allocations.  However, the check is performed without a proper
lock and the allocation isn't serialized; this allows user to allocate
more memories than predefined max size.

Practically seen, this isn't really a big problem, as it's more or
less some "soft limit" as a sanity check, and it's not possible to
allocate unlimitedly.  But it's still better to address this for more
consistent behavior.

The patch covers the size check in do_alloc_pages() with the
card->memory_mutex, and increases the allocated size there for
preventing the further overflow.  When the actual allocation fails,
the size is decreased accordingly.

Reported-by: BassCheck <bass@buaa.edu.cn>
Reported-by: Tuo Li <islituo@gmail.com>
Link: https://lore.kernel.org/r/CADm8Tek6t0WedK+3Y6rbE5YEt19tML8BUL45N2ji4ZAz1KcN_A@mail.gmail.com
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230703112430.30634-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: jack: Fix mutex call in snd_jack_report()

commit 89dbb335cb6a627a4067bc42caa09c8bc3326d40 upstream.

snd_jack_report() is supposed to be callable from an IRQ context, too,
and it's indeed used in that way from virtsnd driver. The fix for
input_dev race in commit 1b6a6fc5280e ("ALSA: jack: Access input_dev
under mutex"), however, introduced a mutex lock in snd_jack_report(),
and this resulted in a potential sleep-in-atomic.

For addressing that problem, this patch changes the relevant code to
use the object get/put and removes the mutex usage. That is,
snd_jack_report(), it takes input_get_device() and leaves with
input_put_device() for assuring the input_dev being assigned.

Although the whole mutex could be reduced, we keep it because it can
be still a protection for potential races between creation and
deletion.

Fixes: 1b6a6fc5280e ("ALSA: jack: Access input_dev under mutex")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/cf95f7fe-a748-4990-8378-000491b40329@moroto.mountain
Tested-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230706155357.3470-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for Clevo NPx0SNx

commit 22065e4214c1196b54fc164892c2e193a743caf3 upstream.

This applies a SND_PCI_QUIRK(...) to the Clevo NPx0SNx barebones fixing the
microphone not being detected on the headset combo port.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230628155434.584159-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook

commit e94f1f96f108ba96c0ed8bf3fbdd8ee6a6703880 upstream.

On HP EliteBook 835/845/845W G10, the audio LEDs can be enabled by
ALC285_FIXUP_HP_MUTE_LED. So use it accordingly.

Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Fixes: 3e10f6ca76c4 ("ALSA: hda/realtek: Add quirk for HP EliteBook G10 laptops")
Link: https://lore.kernel.org/r/20230626130301.301712-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/mmap: Fix VM_LOCKED check in do_vmi_align_munmap()

6.1 backport of the patch [1] uses 'next' vma instead of 'split' vma.
Fix the mistake.

[1] commit 606c812eb1d5 ("mm/mmap: Fix error path in do_vmi_align_munmap()")

Fixes: a149174ff8bb ("mm/mmap: Fix error path in do_vmi_align_munmap()")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drm/amd/display: edp do not add non-edid timings"

commit d6149086b45e150c170beaa4546495fd1880724c upstream.

This change causes regression when eDP and external display in mirror
mode. When external display supports low resolution than eDP, use eDP
timing to driver external display may cause corruption on external
display.

This reverts commit e749dd10e5f292061ad63d2b030194bf7d7d452c.

Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2655
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: accel: fxls8962af: fixup buffer scan element type

commit d1cfbd52ede5e5fabc09992894c5733b4057f159 upstream.

Scan elements for x,y,z channels is little endian and requires no bit shifts.
LE vs. BE is controlled in register SENS_CONFIG2 and bit LE_BE, default
value is LE.

Fixes: a3e0b51884ee ("iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230605103223.1400980-1-sean@geanix.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: accel: fxls8962af: errata bug only applicable for FXLS8962AF

commit b410a9307bc3a7cdee3c930c98f6fc9cf1d2c484 upstream.

Remove special errata handling if FXLS8964AF is used.

Fixes: af959b7b96b8 ("iio: accel: fxls8962af: fix errata bug E3 - I2C burst reads")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230605103223.1400980-2-sean@geanix.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: ad7192: Fix internal/external clock selection

commit f7d9e21dd274b97dc0a8dbc136a2ea8506063a96 upstream.

Fix wrong selection of internal clock when mclk is defined.

Resolve a logical inversion introduced in c9ec2cb328e3.

Fixes: c9ec2cb328e3 ("iio: adc: ad7192: use devm_clk_get_optional() for mclk")
Signed-off-by: Fabrizio Lamarque <fl.scratchpad@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230530075311.400686-3-fl.scratchpad@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: ad7192: Fix null ad7192_state pointer access

commit 9e58e3a6f8e1c483c86a04903b7b7aa0923e4426 upstream.

Pointer to indio_dev structure is obtained via spi_get_drvdata() at
the beginning of function ad7192_setup(), but the spi->dev->driver_data
member is not initialized, hence a NULL pointer is returned.

Fix by changing ad7192_setup() signature to take pointer to struct
iio_dev, and get ad7192_state pointer via st = iio_priv(indio_dev);

Fixes: bd5dcdeb3fd0 ("iio: adc: ad7192: convert to device-managed functions")
Signed-off-by: Fabrizio Lamarque <fl.scratchpad@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230530075311.400686-2-fl.scratchpad@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: tegra: xusb: Clear the driver reference in usb-phy dev

commit c0c2fcb1325d0d4f3b322b5ee49385f8eca2560d upstream.

For the dual-role port, it will assign the phy dev to usb-phy dev and
use the port dev driver as the dev driver of usb-phy.

When we try to destroy the port dev, it will destroy its dev driver
as well. But we did not remove the reference from usb-phy dev. This
might cause the use-after-free issue in KASAN.

Fixes: e8f7d2f409a1 ("phy: tegra: xusb: Add usb-phy support")
Cc: stable@vger.kernel.org
Signed-off-by: EJ Hsu <ejh@nvidia.com>
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230609062932.3276509-1-haotienh@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Propagate core init errors to UDC during pullup

commit c0aabed9cabe057309779a9e26fe86a113d24dad upstream.

In scenarios where pullup relies on resume (get sync) to initialize
the controller and set the run stop bit, then core_init is followed by
gadget_resume which will eventually set run stop bit.

But in cases where the core_init fails, the return value is not sent
back to udc appropriately. So according to UDC the controller has
started but in reality we never set the run stop bit.

On systems like Android, there are uevents sent to HAL depending on
whether the configfs_bind / configfs_disconnect were invoked. In the
above mentioned scnenario, if the core init fails, the run stop won't
be set and the cable plug-out won't result in generation of any
disconnect event and userspace would never get any uevent regarding
cable plug out and we never call pullup(0) again. Furthermore none of
the next Plug-In/Plug-Out's would be known to configfs.

Return back the appropriate result to UDC to let the userspace/
configfs know that the pullup failed so they can take appropriate
action.

Fixes: 77adb8bdf422 ("usb: dwc3: gadget: Allow runtime suspend if UDC unbinded")
Cc: stable <stable@kernel.org>
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Message-ID: <20230618120949.14868-1-quic_kriskura@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add LARA-R6 01B PIDs

commit ffa5f7a3bf28c1306eef85d4056539c2d4b8eb09 upstream.

The new LARA-R6 product variant identified by the "01B" string can be
configured (by AT interface) in three different USB modes:

* Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial
interfaces

* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial
interfaces and 1 RmNet virtual network interface

* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial
interface and 1 CDC-ECM virtual network interface
The first 4 interfaces of all the 3 USB configurations (default, RmNet,
CDC-ECM) are the same.

In default mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions

In RmNet mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
If 4: RMNET interface

In CDC-ECM mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
If 4: CDC-ECM interface

Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Link: https://lore.kernel.org/r/20230622092921.12651-1-davide.tronchin.94@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid1-10: fix casting from randomized structure in raid1_submit_write()

commit b5a99602b74bbfa655be509c615181dd95b0719e upstream.

Following build error triggered while build with clang version 17.0.0
with W=1(this can't be reporduced with gcc 13.1.0):

drivers/md/raid1-10.c:117:25: error: casting from randomized structure
pointer type 'struct block_device *' to 'struct md_rdev *'
117 | struct md_rdev *rdev = (struct md_rdev *)bio->bi_bdev;
| ^

Fix this by casting 'bio->bi_bdev' to 'void *', as it used to be.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306142042.fmjfmTF8-lkp@intel.com/
Fixes: 8295efbe68c0 ("md/raid1-10: factor out a helper to submit normal write")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230616012136.3047071-1-yukuai1@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/efi: Make efi_set_virtual_address_map IBT safe

[ Upstream commit 0303c9729afc4094ef53e552b7b8cff7436028d6 ]

Niklāvs reported a boot regression on an Alderlake machine and bisected it
to commit 9df9d2f0471b ("init: Invoke arch_cpu_finalize_init() earlier").

By moving the invocation of arch_cpu_finalize_init() further down he
identified that efi_enter_virtual_mode() is the function which causes the
boot hang.

The main difference of the earlier invocation is that the boot CPU is
already fully initialized and mitigations and alternatives are applied.

But the only really interesting change turned out to be IBT, which is now
enabled before efi_enter_virtual_mode(). "ibt=off" on the kernel command
line cured the problem.

Inspection of the involved calls in efi_enter_virtual_mode() unearthed that
efi_set_virtual_address_map() is the only place in the kernel which invokes
an EFI call without the IBT safe wrapper. This went obviously unnoticed so
far as IBT was enabled later.

Use arch_efi_call_virt() instead of efi_call() to cure that.

Fixes: fe379fa4d199 ("x86/ibt: Disable IBT around firmware")
Fixes: 9df9d2f0471b ("init: Invoke arch_cpu_finalize_init() earlier")
Reported-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217602
Link: https://lore.kernel.org/r/87jzvm12q0.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: sme: Use STR P to clear FFR context field in streaming SVE mode

[ Upstream commit 893b24181b4c4bf1fa2841b1ed192e5413a97cb1 ]

The FFR is a predicate register which can vary between 16 and 256 bits
in size depending upon the configured vector length. When saving the
SVE state in streaming SVE mode, the FFR register is inaccessible and
so commit 9f5848665788 ("arm64/sve: Make access to FFR optional") simply
clears the FFR field of the in-memory context structure. Unfortunately,
it achieves this using an unconditional 8-byte store and so if the SME
vector length is anything other than 64 bytes in size we will either
fail to clear the entire field or, worse, we will corrupt memory
immediately following the structure. This has led to intermittent kfence
splats in CI [1] and can trigger kmalloc Redzone corruption messages
when running the 'fp-stress' kselftest:

| =============================================================================
| BUG kmalloc-1k (Not tainted): kmalloc Redzone overwritten
| -----------------------------------------------------------------------------
|
| 0xffff000809bf1e22-0xffff000809bf1e27 @offset=7714. First byte 0x0 instead of 0xcc
| Allocated in do_sme_acc+0x9c/0x220 age=2613 cpu=1 pid=531
|  __kmalloc+0x8c/0xcc
|  do_sme_acc+0x9c/0x220
|  ...

Replace the 8-byte store with a store of a predicate register which has
been zero-initialised with PFALSE, ensuring that the entire field is
cleared in memory.

[1] https://lore.kernel.org/r/CA+G9fYtU7HsV0R0dp4XEH5xXHSJFw8KyDf5VQrLLfMxWfxQkag@mail.gmail.com

Cc: Mark Brown <broonie@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 9f5848665788 ("arm64/sve: Make access to FFR optional")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://lore.kernel.org/r/20230628155605.22296-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ksmbd: avoid field overflow warning

[ Upstream commit 9cedc58bdbe9fff9aacd0ca19ee5777659f28fd7 ]

clang warns about a possible field overflow in a memcpy:

In file included from fs/smb/server/smb_common.c:7:
include/linux/fortify-string.h:583:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
__write_overflow_field(p_size_field, size);

It appears to interpret the "&out[baselen + 4]" as referring to a single
byte of the character array, while the equivalen "out + baselen + 4" is
seen as an offset into the array.

I don't see that kind of warning elsewhere, so just go with the simple
rework.

Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smb: client: fix broken file attrs with nodfs mounts

[ Upstream commit d439b29057e26464120fc6c18f97433aa003b5fe ]

*_get_inode_info() functions expect -EREMOTE when query path info
calls find a DFS link, regardless whether !CONFIG_CIFS_DFS_UPCALL or
'nodfs' mount option.  Otherwise, those files will miss the fake DFS
file attributes.

Before patch

  $ mount.cifs //srv/dfs /mnt/1 -o ...,nodfs
  $ ls -l /mnt/1
  ls: cannot access '/mnt/1/link': Operation not supported
  total 0
  -rwxr-xr-x 1 root root 0 Jul 26  2022 dfstest2_file1.txt
  drwxr-xr-x 2 root root 0 Aug  8  2022 dir1
  d????????? ? ?    ?    ?            ? link

After patch

  $ mount.cifs //srv/dfs /mnt/1 -o ...,nodfs
  $ ls -l /mnt/1
  total 0
  -rwxr-xr-x 1 root root 0 Jul 26  2022 dfstest2_file1.txt
  drwxr-xr-x 2 root root 0 Aug  8  2022 dir1
  drwx--x--x 2 root root 0 Jun 26 20:29 link

Fixes: c877ce47e137 ("cifs: reduce roundtrips on create/qinfo requests")
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: do all necessary checks for credits within or before locking

[ Upstream commit 326a8d04f147e2bf393f6f9cdb74126ee6900607 ]

All the server credits and in-flight info is protected by req_lock.
Once the req_lock is held, and we've determined that we have enough
credits to continue, this lock cannot be dropped till we've made the
changes to credits and in-flight count.

However, we used to drop the lock in order to avoid deadlock with
the recent srv_lock. This could cause the checks already made to be
invalidated.

Fixed it by moving the server status check to before locking req_lock.

Fixes: d7d7a66aacd6 ("cifs: avoid use of global locks for high contention data")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: prevent use-after-free by freeing the cfile later

[ Upstream commit 33f736187d08f6bc822117629f263b97d3df4165 ]

In smb2_compound_op we have a possible use-after-free
which can cause hard to debug problems later on.

This was revealed during stress testing with KASAN enabled
kernel. Fixing it by moving the cfile free call to
a few lines below, after the usage.

Fixes: 76894f3e2f71 ("cifs: improve symlink handling for smb2+")
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/libstub: Disable PCI DMA before grabbing the EFI memory map

[ Upstream commit 2e28a798c3092ea42b968fa16ac835969d124898 ]

Currently, the EFI stub will disable PCI DMA as the very last thing it
does before calling ExitBootServices(), to avoid interfering with the
firmware's normal operation as much as possible.

However, the stub will invoke DisconnectController() on all endpoints
downstream of the PCI bridges it disables, and this may affect the
layout of the EFI memory map, making it substantially more likely that
ExitBootServices() will fail the first time around, and that the EFI
memory map needs to be reloaded.

This, in turn, increases the likelihood that the slack space we
allocated is insufficient (and we can no longer allocate memory via boot
services after having called ExitBootServices() once), causing the
second call to GetMemoryMap (and therefore the boot) to fail. This makes
the PCI DMA disable feature a bit more fragile than it already is, so
let's make it more robust, by allocating the space for the EFI memory
map after disabling PCI DMA.

Fixes: 4444f8541dad16fe ("efi: Allow disabling PCI busmastering on bridges during boot")
Reported-by: Glenn Washburn <development@efficientek.com>
Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: Disable GCOV for *.mod.o

[ Upstream commit 25a21fbb934a0d989e1858f83c2ddf4cfb2ebe30 ]

With GCOV_PROFILE_ALL, Clang injects __llvm_gcov_* functions to each
object file, including the *.mod.o. As we filter out CC_FLAGS_CFI
for *.mod.o, the compiler won't generate type hashes for the
injected functions, and therefore indirectly calling them during
module loading trips indirect call checking.

Enabling CFI for *.mod.o isn't sufficient to fix this issue after
commit 0c3e806ec0f9 ("x86/cfi: Add boot time hash randomization"),
as *.mod.o aren't processed by objtool, which means any hashes
emitted there won't be randomized. Therefore, in addition to
disabling CFI for *.mod.o, also disable GCOV, as the object files
don't otherwise contain any executable code.

Fixes: cf68fffb66d6 ("add support for Clang CFI")
Reported-by: Joe Fradley <joefradley@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwrng: st - keep clock enabled while hwrng is registered

[ Upstream commit 501e197a02d4aef157f53ba3a0b9049c3e52fedc ]

The st-rng driver uses devres to register itself with the hwrng core,
the driver will be unregistered from hwrng when its device goes out of
scope. This happens after the driver's remove function is called.

However, st-rng's clock is disabled in the remove function. There's a
short timeframe where st-rng is still registered with the hwrng core
although its clock is disabled. I suppose the clock must be active to
access the hardware and serve requests from the hwrng core.

Switch to devm_clk_get_enabled and let devres disable the clock and
unregister the hwrng. This avoids the race condition.

Fixes: 3e75241be808 ("hwrng: drivers - Use device-managed registration API")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dax/kmem: Pass valid argument to memory_group_register_static

[ Upstream commit 46e66dab8565f742374e9cc4ff7d35f344d774e2 ]

memory_group_register_static takes maximum number of pages as the argument
while dev_dax_kmem_probe passes total_len (in bytes) as the argument.

IIUC, I don't see any crash/panic impact as such. As,
memory_group_register_static just set the max_pages limit which is used in
auto_movable_zone_for_pfn to determine the zone.

which might cause these condition to behave differently,

This will be true always so jump will happen to kernel_zone
    ...
    if (!auto_movable_can_online_movable(NUMA_NO_NODE, group, nr_pages))
        goto kernel_zone;

    ...
    kernel_zone:
        return default_kernel_zone_for_pfn(nid, pfn, nr_pages);

Here, In below, zone_intersects compare range will be larger as nr_pages
will be higher (derived from total_len passed in dev_dax_kmem_probe).

    ...
    static struct zone *default_kernel_zone_for_pfn(int nid, unsigned long start_pfn,
     unsigned long nr_pages)
    {
     struct pglist_data *pgdat = NODE_DATA(nid);
     int zid;

     for (zid = 0; zid < ZONE_NORMAL; zid++) {
     struct zone *zone = &pgdat->node_zones[zid];

     if (zone_intersects(zone, start_pfn, nr_pages))
     return zone;
     }

     return &pgdat->node_zones[ZONE_NORMAL];
    }

Incorrect zone will be returned here, which in later time might cause bigger
problem.

Fixes: eedf634aac3b ("dax/kmem: use a single static memory group for a single probed unit")
Signed-off-by: Tarun Sahu <tsahu@linux.ibm.com>
Link: https://lore.kernel.org/r/20230621155025.370672-1-tsahu@linux.ibm.com
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dax: Introduce alloc_dev_dax_id()

[ Upstream commit 70aab281e18c68a1284bc387de127c2fc0bed3f8 ]

The reference counting of dax_region objects is needlessly complicated,
has lead to confusion [1], and has hidden a bug [2]. Towards cleaning up
that mess introduce alloc_dev_dax_id() to minimize the holding of a
dax_region reference to only what dev_dax_release() needs, the
dax_region->ida.

Part of the reason for the mess was the design to dereference a
dax_region in all cases in free_dev_dax_id() even if the id was
statically assigned by the upper level dax_region driver. Remove the
need to call "is_static(dax_region)" by tracking whether the id is
dynamic directly in the dev_dax instance itself.

With that flag the dax_region pinning and release per dev_dax instance
can move to alloc_dev_dax_id() and free_dev_dax_id() respectively.

A follow-on cleanup address the unnecessary references in the dax_region
setup and drivers.

Fixes: 0f3da14a4f05 ("device-dax: introduce 'seed' devices")
Link: http://lore.kernel.org/r/20221203095858.612027-1-liuyongqiang13@huawei.com
Link: http://lore.kernel.org/r/3cf0890b-4eb0-e70e-cd9c-2ecc3d496263@hpe.com
Reported-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Reported-by: Paul Cassella <cassella@hpe.com>
Reported-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/168577284563.1672036.13493034988900989554.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dax: Fix dax_mapping_release() use after free

[ Upstream commit 6d24b170a9db0456f577b1ab01226a2254c016a8 ]

A CONFIG_DEBUG_KOBJECT_RELEASE test of removing a device-dax region
provider (like modprobe -r dax_hmem) yields:

kobject: 'mapping0' (ffff93eb460e8800): kobject_release, parent 0000000000000000 (delayed 2000)
[..]
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 23 PID: 282 at kernel/locking/lockdep.c:232 __lock_acquire+0x9fc/0x2260
[..]
RIP: 0010:__lock_acquire+0x9fc/0x2260
[..]
Call Trace:
  <TASK>
[..]
  lock_acquire+0xd4/0x2c0
  ? ida_free+0x62/0x130
  _raw_spin_lock_irqsave+0x47/0x70
  ? ida_free+0x62/0x130
  ida_free+0x62/0x130
  dax_mapping_release+0x1f/0x30
  device_release+0x36/0x90
  kobject_delayed_cleanup+0x46/0x150

Due to attempting ida_free() on an ida object that has already been
freed. Devices typically only hold a reference on their parent while
registered. If a child needs a parent object to complete its release it
needs to hold a reference that it drops from its release callback.
Arrange for a dax_mapping to pin its parent dev_dax instance until
dax_mapping_release().

Fixes: 0b07ce872a9e ("device-dax: introduce 'mapping' devices")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/168577283412.1672036.16111545266174261446.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SMB3: Do not send lease break acknowledgment if all file handles have been closed

[ Upstream commit da787d5b74983f7525d1eb4b9c0b4aff2821511a ]

In case if all existing file handles are deferred handles and if all of
them gets closed due to handle lease break then we dont need to send
lease break acknowledgment to server, because last handle close will be
considered as lease break ack.
After closing deferred handels, we check for openfile list of inode,
if its empty then we skip sending lease break ack.

Fixes: 59a556aebc43 ("SMB3: drop reference to cfile before sending oplock break")
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.1: freeze the session table upon receiving NFS4ERR_BADSESSION

[ Upstream commit c907e72f58ed979a24a9fdcadfbc447c51d5e509 ]

When the client received NFS4ERR_BADSESSION, it schedules recovery
and start the state manager thread which in turn freezes the
session table and does not allow for any new requests to use the
no-longer valid session. However, it is possible that before
the state manager thread runs, a new operation would use the
released slot that received BADSESSION and was therefore not
updated its sequence number. Such re-use of the slot can lead
the application errors.

Fixes: 5c441544f045 ("NFSv4.x: Handle bad/dead sessions correctly in nfs41_sequence_process()")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2: fix wrong shrinker_id

[ Upstream commit 7f7ab336898f281e58540ef781a8fb375acc32a9 ]

Currently, the list_lru::shrinker_id corresponding to the nfs4_xattr
shrinkers is wrong:

>>> prog["nfs4_xattr_cache_lru"].shrinker_id
(int)0
>>> prog["nfs4_xattr_entry_lru"].shrinker_id
(int)0
>>> prog["nfs4_xattr_large_entry_lru"].shrinker_id
(int)0
>>> prog["nfs4_xattr_cache_shrinker"].id
(int)18
>>> prog["nfs4_xattr_entry_shrinker"].id
(int)19
>>> prog["nfs4_xattr_large_entry_shrinker"].id
(int)20

This is not what we expect, which will cause these shrinkers
not to be found in shrink_slab_memcg().

We should assign shrinker::id before calling list_lru_init_memcg(),
so that the corresponding list_lru::shrinker_id will be assigned
the correct value like below:

>>> prog["nfs4_xattr_cache_lru"].shrinker_id
(int)16
>>> prog["nfs4_xattr_entry_lru"].shrinker_id
(int)17
>>> prog["nfs4_xattr_large_entry_lru"].shrinker_id
(int)18
>>> prog["nfs4_xattr_cache_shrinker"].id
(int)16
>>> prog["nfs4_xattr_entry_shrinker"].id
(int)17
>>> prog["nfs4_xattr_large_entry_shrinker"].id
(int)18

So just do it.

Fixes: 95ad37f90c33 ("NFSv4.2: add client side xattr caching.")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - unmap buffers before free for RSA

[ Upstream commit d776b25495f2c71b9dbf1f5e53b642215ba72f3c ]

The callback function for RSA frees the memory allocated for the source
and destination buffers before unmapping them.
This sequence is wrong.

Change the cleanup sequence to unmap the buffers before freeing them.

Fixes: 3dfaf0071ed7 ("crypto: qat - remove dma_free_coherent() for RSA")
Signed-off-by: Hareshx Sankar Raj <hareshx.sankar.raj@intel.com>
Co-developed-by: Bolemx Sivanagaleela <bolemx.sivanagaleela@intel.com>
Signed-off-by: Bolemx Sivanagaleela <bolemx.sivanagaleela@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - unmap buffer before free for DH

[ Upstream commit eb7713f5ca97697b92f225127440d1525119b8de ]

The callback function for DH frees the memory allocated for the
destination buffer before unmapping it.
This sequence is wrong.

Change the cleanup sequence to unmap the buffer before freeing it.

Fixes: 029aa4624a7f ("crypto: qat - remove dma_free_coherent() for DH")
Signed-off-by: Hareshx Sankar Raj <hareshx.sankar.raj@intel.com>
Co-developed-by: Bolemx Sivanagaleela <bolemx.sivanagaleela@intel.com>
Signed-off-by: Bolemx Sivanagaleela <bolemx.sivanagaleela@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - Use helper to set reqsize

[ Upstream commit 80e62ad58db084920d8cf23323b713391e09f374 ]

The value of reqsize must only be changed through the helper.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: eb7713f5ca97 ("crypto: qat - unmap buffer before free for DH")
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: kpp - Add helper to set reqsize

[ Upstream commit 56861cbde1b9f3b34d300e6ba87f2c3de1a9c309 ]

The value of reqsize should only be changed through a helper.
To do so we need to first add a helper for this.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: eb7713f5ca97 ("crypto: qat - unmap buffer before free for DH")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARC: define ASM_NL and __ALIGN(_STR) outside #ifdef __ASSEMBLY__ guard

[ Upstream commit 92e2921eeafdfca9acd9b83f07d2b7ca099bac24 ]

ASM_NL is useful not only in *.S files but also in .c files for using
inline assembler in C code.

On ARC, however, ASM_NL is evaluated inconsistently. It is expanded to
a backquote (`) in *.S files, but a semicolon (;) in *.c files because
arch/arc/include/asm/linkage.h defines it inside #ifdef __ASSEMBLY__,
so the definition for C code falls back to the default value defined in
include/linux/linkage.h.

If ASM_NL is used in inline assembler in .c files, it will result in
wrong assembly code because a semicolon is not an instruction separator,
but the start of a comment for ARC.

Move ASM_NL (also __ALIGN and __ALIGN_STR) out of the #ifdef.

Fixes: 9df62f054406 ("arch: use ASM_NL instead of ';' for assembler new line character in the macro")
Fixes: 8d92e992a785 ("ARC: define __ALIGN_STR and __ALIGN symbols for ARC")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

modpost: fix off by one in is_executable_section()

[ Upstream commit 3a3f1e573a105328a2cca45a7cfbebabbf5e3192 ]

The > comparison should be >= to prevent an out of bounds array
access.

Fixes: 52dc0595d540 ("modpost: handle relocations mismatch in __ex_table.")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: jitter - correct health test during initialization

[ Upstream commit d23659769ad1bf2cbafaa0efcbae20ef1a74f77e ]

With the update of the permanent and intermittent health errors, the
actual indicator for the health test indicates a potential error only
for the one offending time stamp gathered in the current iteration
round. The next iteration round will "overwrite" the health test result.

Thus, the entropy collection loop in jent_gen_entropy checks for
the health test failure upon each loop iteration. However, the
initialization operation checked for the APT health test once for
an APT window which implies it would not catch most errors.

Thus, the check for all health errors is now invoked unconditionally
during each loop iteration for the startup test.

With the change, the error JENT_ERCT becomes unused as all health
errors are only reported with the JENT_HEALTH return code. This
allows the removal of the error indicator.

Fixes: 3fde2fe99aa6 ("crypto: jitter - permanent and intermittent health errors"
)
Reported-by: Joachim Vandersmissen <git@jvdsn.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: marvell/cesa - Fix type mismatch warning

[ Upstream commit efbc7764c4446566edb76ca05e903b5905673d2e ]

Commit df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") uncovered
a type mismatch in cesa 3des support that leads to a memcpy beyond the
end of a structure:

In function 'fortify_memcpy_chk',
    inlined from 'mv_cesa_des3_ede_setkey' at drivers/crypto/marvell/cesa/cipher.c:307:2:
include/linux/fortify-string.h:583:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
  583 |                         __write_overflow_field(p_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This is probably harmless as the actual data that is copied has the correct
type, but clearly worth fixing nonetheless.

Fixes: 4ada48397823 ("crypto: marvell/cesa - add Triple-DES support")
Cc: Kees Cook <keescook@chromium.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

modpost: fix section mismatch message for R_ARM_{PC24,CALL,JUMP24}

[ Upstream commit 56a24b8ce6a7f9c4a21b2276a8644f6f3d8fc14d ]

addend_arm_rel() processes R_ARM_PC24, R_ARM_CALL, R_ARM_JUMP24 in a
wrong way.

Here, test code.

[test code for R_ARM_JUMP24]

  .section .init.text,"ax"
  bar:
          bx      lr

  .section .text,"ax"
  .globl foo
  foo:
          b       bar

[test code for R_ARM_CALL]

  .section .init.text,"ax"
  bar:
          bx      lr

  .section .text,"ax"
  .globl foo
  foo:
          push    {lr}
          bl      bar
          pop     {pc}

If you compile it with ARM multi_v7_defconfig, modpost will show the
symbol name, (unknown).

  WARNING: modpost: vmlinux.o: section mismatch in reference: foo (section: .text) -> (unknown) (section: .init.text)

(You need to use GNU linker instead of LLD to reproduce it.)

Fix the code to make modpost show the correct symbol name.

I imported (with adjustment) sign_extend32() from include/linux/bitops.h.

The '+8' is the compensation for pc-relative instruction. It is
documented in "ELF for the Arm Architecture" [1].

  "If the relocation is pc-relative then compensation for the PC bias
  (the PC value is 8 bytes ahead of the executing instruction in Arm
  state and 4 bytes in Thumb state) must be encoded in the relocation
  by the object producer."

[1]: https://github.com/ARM-software/abi-aa/blob/main/aaelf32/aaelf32.rst

Fixes: 56a974fa2d59 ("kbuild: make better section mismatch reports on arm")
Fixes: 6e2e340b59d2 ("ARM: 7324/1: modpost: Fix section warnings for ARM for many compilers")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

modpost: fix section mismatch message for R_ARM_ABS32

[ Upstream commit b7c63520f6703a25eebb4f8138fed764fcae1c6f ]

addend_arm_rel() processes R_ARM_ABS32 in a wrong way.

Here, test code.

  [test code 1]

    #include <linux/init.h>

    int __initdata foo;
    int get_foo(void) { return foo; }

If you compile it with ARM versatile_defconfig, modpost will show the
symbol name, (unknown).

  WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> (unknown) (section: .init.data)

(You need to use GNU linker instead of LLD to reproduce it.)

If you compile it for other architectures, modpost will show the correct
symbol name.

  WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> foo (section: .init.data)

For R_ARM_ABS32, addend_arm_rel() sets r->r_addend to a wrong value.

I just mimicked the code in arch/arm/kernel/module.c.

However, there is more difficulty for ARM.

Here, test code.

  [test code 2]

    #include <linux/init.h>

    int __initdata foo;
    int get_foo(void) { return foo; }

    int __initdata bar;
    int get_bar(void) { return bar; }

With this commit applied, modpost will show the following messages
for ARM versatile_defconfig:

  WARNING: modpost: vmlinux.o: section mismatch in reference: get_foo (section: .text) -> foo (section: .init.data)
  WARNING: modpost: vmlinux.o: section mismatch in reference: get_bar (section: .text) -> foo (section: .init.data)

The reference from 'get_bar' to 'foo' seems wrong.

I have no solution for this because it is true in assembly level.

In the following output, relocation at 0x1c is no longer associated
with 'bar'. The two relocation entries point to the same symbol, and
the offset to 'bar' is encoded in the instruction 'r0, [r3, #4]'.

  Disassembly of section .text:

  00000000 <get_foo>:
     0: e59f3004          ldr     r3, [pc, #4]   @ c <get_foo+0xc>
     4: e5930000          ldr     r0, [r3]
     8: e12fff1e          bx      lr
     c: 00000000          .word   0x00000000

  00000010 <get_bar>:
    10: e59f3004          ldr     r3, [pc, #4]   @ 1c <get_bar+0xc>
    14: e5930004          ldr     r0, [r3, #4]
    18: e12fff1e          bx      lr
    1c: 00000000          .word   0x00000000

  Relocation section '.rel.text' at offset 0x244 contains 2 entries:
   Offset     Info    Type            Sym.Value  Sym. Name
  0000000c  00000c02 R_ARM_ABS32       00000000   .init.data
  0000001c  00000c02 R_ARM_ABS32       00000000   .init.data

When find_elf_symbol() gets into a situation where relsym->st_name is
zero, there is no guarantee to get the symbol name as written in C.

I am keeping the current logic because it is useful in many architectures,
but the symbol name is not always correct depending on the optimization.
I left some comments in find_tosym().

Fixes: 56a974fa2d59 ("kbuild: make better section mismatch reports on arm")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: nx - fix build warnings when DEBUG_FS is not enabled

[ Upstream commit b04b076fb56560b39d695ac3744db457e12278fd ]

Fix build warnings when DEBUG_FS is not enabled by using an empty
do-while loop instead of a value:

In file included from ../drivers/crypto/nx/nx.c:27:
../drivers/crypto/nx/nx.c: In function 'nx_register_algs':
../drivers/crypto/nx/nx.h:173:33: warning: statement with no effect [-Wunused-value]
  173 | #define NX_DEBUGFS_INIT(drv)    (0)
../drivers/crypto/nx/nx.c:573:9: note: in expansion of macro 'NX_DEBUGFS_INIT'
  573 |         NX_DEBUGFS_INIT(&nx_driver);
../drivers/crypto/nx/nx.c: In function 'nx_remove':
../drivers/crypto/nx/nx.h:174:33: warning: statement with no effect [-Wunused-value]
  174 | #define NX_DEBUGFS_FINI(drv)    (0)
../drivers/crypto/nx/nx.c:793:17: note: in expansion of macro 'NX_DEBUGFS_FINI'
  793 |                 NX_DEBUGFS_FINI(&nx_driver);

Also, there is no need to build nx_debugfs.o when DEBUG_FS is not
enabled, so change the Makefile to accommodate that.

Fixes: ae0222b7289d ("powerpc/crypto: nx driver code supporting nx encryption")
Fixes: aef7b31c8833 ("powerpc/crypto: Build files for the nx device driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Breno Leitão <leitao@debian.org>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Paulo Flabiano Smorigo <pfsmorigo@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

modpost: remove broken calculation of exception_table_entry size

[ Upstream commit d0acc76a49aa917c1a455d11d32d34a01e8b2835 ]

find_extable_entry_size() is completely broken. It has awesome comments
about how to calculate sizeof(struct exception_table_entry).

It was based on these assumptions:

  - struct exception_table_entry has two fields
  - both of the fields have the same size

Then, we came up with this equation:

  (offset of the second field) * 2 == (size of struct)

It was true for all architectures when commit 52dc0595d540 ("modpost:
handle relocations mismatch in __ex_table.") was applied.

Our mathematics broke when commit 548acf19234d ("x86/mm: Expand the
exception table logic to allow new handling options") introduced the
third field.

Now, the definition of exception_table_entry is highly arch-dependent.

For x86, sizeof(struct exception_table_entry) is apparently 12, but
find_extable_entry_size() sets extable_entry_size to 8.

I could fix it, but I do not see much value in this code.

extable_entry_size is used just for selecting a slightly different
error message.

If the first field ("insn") references to a non-executable section,

    The relocation at %s+0x%lx references
    section "%s" which is not executable, IOW
    it is not possible for the kernel to fault
    at that address.  Something is seriously wrong
    and should be fixed.

If the second field ("fixup") references to a non-executable section,

    The relocation at %s+0x%lx references
    section "%s" which is not executable, IOW
    the kernel will fault if it ever tries to
    jump to it.  Something is seriously wrong
    and should be fixed.

Merge the two error messages rather than adding even more complexity.

Change fatal() to error() to make it continue running and catch more
possible errors.

Fixes: 548acf19234d ("x86/mm: Expand the exception table logic to allow new handling options")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwrng: virtio - Fix race on data_avail and actual data

[ Upstream commit ac52578d6e8d300dd50f790f29a24169b1edd26c ]

The virtio rng device kicks off a new entropy request whenever the
data available reaches zero. When a new request occurs at the end
of a read operation, that is, when the result of that request is
only needed by the next reader, then there is a race between the
writing of the new data and the next reader.

This is because there is no synchronisation whatsoever between the
writer and the reader.

Fix this by writing data_avail with smp_store_release and reading
it with smp_load_acquire when we first enter read. The subsequent
reads are safe because they're either protected by the first load
acquire, or by the completion mechanism.

Also remove the redundant zeroing of data_idx in random_recv_done
(data_idx must already be zero at this point) and data_avail in
request_entropy (ditto).

Reported-by: syzbot+726dc8c62c3536431ceb@syzkaller.appspotmail.com
Fixes: f7f510ec1957 ("virtio: An entropy device, as suggested by hpa.")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/mdev: Move the compat_class initialization to module init

[ Upstream commit ff598081e5b9d0bdd6874bfe340811bbb75b35e4 ]

The pointer to mdev_bus_compat_class is statically defined at the top
of mdev_core, and was originally (commit 7b96953bc640 ("vfio: Mediated
device Core driver") serialized by the parent_list_lock. The blamed
commit removed this mutex, leaving the pointer initialization
unserialized. As a result, the creation of multiple MDEVs in parallel
(such as during boot) can encounter errors during the creation of the
sysfs entries, such as:

  [    8.337509] sysfs: cannot create duplicate filename '/class/mdev_bus'
  [    8.337514] vfio_ccw 0.0.01d8: MDEV: Registered
  [    8.337516] CPU: 13 PID: 946 Comm: driverctl Not tainted 6.4.0-rc7 #20
  [    8.337522] Hardware name: IBM 3906 M05 780 (LPAR)
  [    8.337525] Call Trace:
  [    8.337528]  [<0000000162b0145a>] dump_stack_lvl+0x62/0x80
  [    8.337540]  [<00000001622aeb30>] sysfs_warn_dup+0x78/0x88
  [    8.337549]  [<00000001622aeca6>] sysfs_create_dir_ns+0xe6/0xf8
  [    8.337552]  [<0000000162b04504>] kobject_add_internal+0xf4/0x340
  [    8.337557]  [<0000000162b04d48>] kobject_add+0x78/0xd0
  [    8.337561]  [<0000000162b04e0a>] kobject_create_and_add+0x6a/0xb8
  [    8.337565]  [<00000001627a110e>] class_compat_register+0x5e/0x90
  [    8.337572]  [<000003ff7fd815da>] mdev_register_parent+0x102/0x130 [mdev]
  [    8.337581]  [<000003ff7fdc7f2c>] vfio_ccw_sch_probe+0xe4/0x178 [vfio_ccw]
  [    8.337588]  [<0000000162a7833c>] css_probe+0x44/0x80
  [    8.337599]  [<000000016279f4da>] really_probe+0xd2/0x460
  [    8.337603]  [<000000016279fa08>] driver_probe_device+0x40/0xf0
  [    8.337606]  [<000000016279fb78>] __device_attach_driver+0xc0/0x140
  [    8.337610]  [<000000016279cbe0>] bus_for_each_drv+0x90/0xd8
  [    8.337618]  [<00000001627a00b0>] __device_attach+0x110/0x190
  [    8.337621]  [<000000016279c7c8>] bus_rescan_devices_helper+0x60/0xb0
  [    8.337626]  [<000000016279cd48>] drivers_probe_store+0x48/0x80
  [    8.337632]  [<00000001622ac9b0>] kernfs_fop_write_iter+0x138/0x1f0
  [    8.337635]  [<00000001621e5e14>] vfs_write+0x1ac/0x2f8
  [    8.337645]  [<00000001621e61d8>] ksys_write+0x70/0x100
  [    8.337650]  [<0000000162b2bdc4>] __do_syscall+0x1d4/0x200
  [    8.337656]  [<0000000162b3c828>] system_call+0x70/0x98
  [    8.337664] kobject: kobject_add_internal failed for mdev_bus with -EEXIST, don't try to register things with the same name in the same directory.
  [    8.337668] kobject: kobject_create_and_add: kobject_add error: -17
  [    8.337674] vfio_ccw: probe of 0.0.01d9 failed with error -12
  [    8.342941] vfio_ccw_mdev aeb9ca91-10c6-42bc-a168-320023570aea: Adding to iommu group 2

Move the initialization of the mdev_bus_compat_class pointer to the
init path, to match the cleanup in module exit. This way the code
in mdev_register_parent() can simply link the new parent to it,
rather than determining whether initialization is required first.

Fixes: 89345d5177aa ("vfio/mdev: embedd struct mdev_parent in the parent data structure")
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230626133642.2939168-1-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()

[ Upstream commit 0c0206dc4f5ba2d18b15e24d2047487d6f73916b ]

The ret variable in the vmd_enable_domain() function was used
uninitialized when printing a warning message upon failure of
the pci_reset_bus() function.

Thus, fix the issue by assigning ret with the value returned from
pci_reset_bus() before referencing it in the warning message.

This was detected by Smatch:

drivers/pci/controller/vmd.c:931 vmd_enable_domain() error: uninitialized symbol 'ret'.

[kwilczynski: drop the second patch from the series, add missing reported
by tag, commit log]
Fixes: 0a584655ef89 ("PCI: vmd: Fix secondary bus reset for Intel bridges")
Link: https://lore.kernel.org/all/202305270219.B96IiIfv-lkp@intel.com
Link: https://lore.kernel.org/linux-pci/20230420094332.1507900-2-korantwork@gmail.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Xinghui Li <korantli@tencent.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: endpoint: functions/pci-epf-test: Fix dma_chan direction

[ Upstream commit 880d51c729a3fa944794feb19f605eefe55916fc ]

In pci_epf_test_init_dma_chan() epf_test->dma_chan_rx is assigned from
dma_request_channel() with DMA_DEV_TO_MEM as filter.dma_mask.

However, in pci_epf_test_data_transfer() if the dir is DMA_DEV_TO_MEM,
epf->dma_chan_rx should be used but instead we are using
epf_test->dma_chan_tx.

Fix it.

Link: https://lore.kernel.org/r/20230412063447.2841177-1-yoshihiro.shimoda.uh@renesas.com
Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities")
Tested-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: endpoint: Fix a Kconfig prompt of vNTB driver

[ Upstream commit 37587673cda963ec950e4983db5023802f9b5ff2 ]

vNTB driver and NTB driver have same Kconfig prompt. Changed to make it
distinguishable.

Link: https://lore.kernel.org/r/20230202103832.2038286-1-mie@igel.co.jp
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: endpoint: Fix Kconfig indent style

[ Upstream commit 2759ddf7535d63381f9b9b1412e4c46e13ed773a ]

Change to follow the Kconfig style guide. This patch fixes to use tab
rather than space to indent, while help text is indented an additional
two spaces.

Link: https://lore.kernel.org/r/20220815025006.48167-1-mie@igel.co.jp
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Stable-dep-of: 37587673cda9 ("PCI: endpoint: Fix a Kconfig prompt of vNTB driver")
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/mm/dax: Fix the condition when checking if altmap vmemap can cross-boundary

[ Upstream commit c8eebc4a99f15280654f23e914e746c40a516e50 ]

Without this fix, the last subsection vmemmap can end up in memory even if
the namespace is created with -M mem and has sufficient space in the altmap
area.

Fixes: cf387d9644d8 ("libnvdimm/altmap: Track namespace boundaries in altmap")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com <mailto:sachinp@linux.ibm.com>>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616110826.344417-6-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/book3s64/mm: Fix DirectMap stats in /proc/meminfo

[ Upstream commit 0da90af431abc3f497a38ec9ef6e43b0d0dabe80 ]

On memory unplug reduce DirectMap page count correctly.
root@ubuntu-guest:# grep Direct /proc/meminfo
DirectMap4k:           0 kB
DirectMap64k:           0 kB
DirectMap2M:    115343360 kB
DirectMap1G:           0 kB

Before fix:
root@ubuntu-guest:# ndctl disable-namespace all
disabled 1 namespace
root@ubuntu-guest:# grep Direct /proc/meminfo
DirectMap4k:           0 kB
DirectMap64k:           0 kB
DirectMap2M:    115343360 kB
DirectMap1G:           0 kB

After fix:
root@ubuntu-guest:# ndctl disable-namespace all
disabled 1 namespace
root@ubuntu-guest:# grep Direct /proc/meminfo
DirectMap4k:           0 kB
DirectMap64k:           0 kB
DirectMap2M:    104857600 kB
DirectMap1G:           0 kB

Fixes: a2dc009afa9a ("powerpc/mm/book3s/radix: Add mapping statistics")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com <mailto:sachinp@linux.ibm.com>>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616110826.344417-4-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: uprobes: Restore thread.bad_cause

[ Upstream commit 58b1294dd1d65bb62f08dddbf418f954210c2057 ]

thread.bad_cause is saved in arch_uprobe_pre_xol(), it should be restored
in arch_uprobe_{post,abort}_xol() accordingly, otherwise the save operation
is meaningless, this change is similar with x86 and powerpc.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Fixes: 74784081aac8 ("riscv: Add uprobes supported")
Link: https://lore.kernel.org/r/1682214146-3756-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: qcom: Disable write access to read only registers for IP v2.9.0

[ Upstream commit 200b8f85f2021362adcc8efb575652a2aa44c099 ]

In the post init sequence of v2.9.0, write access to read only registers
are not disabled after updating the registers. Fix it by disabling the
access after register update.

While at it, let's also add a newline after existing dw_pcie_dbi_ro_wr_en()
guard function to align with rest of the driver.

Link: https://lore.kernel.org/r/20230619150408.8468-4-manivannan.sadhasivam@linaro.org
Fixes: 0cf7c2efe8ac ("PCI: qcom: Add IPQ60xx support")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: qcom: Use DWC helpers for modifying the read-only DBI registers

[ Upstream commit 60f0072d7fb7996b9a524ef0d152e21205473192 ]

DWC core already exposes dw_pcie_dbi_ro_wr_{en/dis} helper APIs for
enabling and disabling the write access to read only DBI registers. So
let's use them instead of doing it manually.

Also, the existing code doesn't disable the write access when it's done.
This is also fixed now.

Link: https://lore.kernel.org/r/20230619150408.8468-3-manivannan.sadhasivam@linaro.org
Fixes: 5d76117f070d ("PCI: qcom: Add support for IPQ8074 PCIe controller")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: qcom: Use lower case for hex

[ Upstream commit 94ebd232dbc84dfdfbf0c406137a8b2aa8b37a01 ]

To maintain uniformity, let's use lower case for representing hexadecimal
numbers.

Link: https://lore.kernel.org/r/20230316081117.14288-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Stable-dep-of: 60f0072d7fb7 ("PCI: qcom: Use DWC helpers for modifying the read-only DBI registers")
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: qcom: Sort and group registers and bitfield definitions

[ Upstream commit 769e49d87b15c302c9aadd87c7d114cfe7052320 ]

Sorting the registers and their bit definitions will make it easier to add
more definitions in the future and it also helps in maintenance.

While at it, let's also group the registers and bit definitions separately
as done in the pcie-qcom-ep driver.

Link: https://lore.kernel.org/r/20230316081117.14288-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Stable-dep-of: 60f0072d7fb7 ("PCI: qcom: Use DWC helpers for modifying the read-only DBI registers")
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: qcom: Remove PCIE20_ prefix from register definitions

[ Upstream commit 39171b33f6523f28c1c1256427e5f50c74b69639 ]

The PCIE part is redundant and 20 doesn't represent anything across the
SoCs supported now. So let's get rid of the prefix.

This involves adding the IP version suffix to one definition of
PARF_SLV_ADDR_SPACE_SIZE that defines offset specific to that version.
The other definition is generic for the rest of the versions.

Also, the register PCIE20_LNK_CONTROL2_LINK_STATUS2 is not used anywhere,
hence removed.

Link: https://lore.kernel.org/r/20230316081117.14288-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Stable-dep-of: 60f0072d7fb7 ("PCI: qcom: Use DWC helpers for modifying the read-only DBI registers")
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: update ppc_save_regs to save current r1 in pt_regs

[ Upstream commit b684c09f09e7a6af3794d4233ef785819e72db79 ]

ppc_save_regs() skips one stack frame while saving the CPU register states.
Instead of saving current R1, it pulls the previous stack frame pointer.

When vmcores caused by direct panic call (such as `echo c >
/proc/sysrq-trigger`), are debugged with gdb, gdb fails to show the
backtrace correctly. On further analysis, it was found that it was because
of mismatch between r1 and NIP.

GDB uses NIP to get current function symbol and uses corresponding debug
info of that function to unwind previous frames, but due to the
mismatching r1 and NIP, the unwinding does not work, and it fails to
unwind to the 2nd frame and hence does not show the backtrace.

GDB backtrace with vmcore of kernel without this patch:

---------
(gdb) bt
#0  0xc0000000002a53e8 in crash_setup_regs (oldregs=<optimized out>,
    newregs=0xc000000004f8f8d8) at ./arch/powerpc/include/asm/kexec.h:69
#1  __crash_kexec (regs=<optimized out>) at kernel/kexec_core.c:974
#2  0x0000000000000063 in ?? ()
#3  0xc000000003579320 in ?? ()
---------

Further analysis revealed that the mismatch occurred because
"ppc_save_regs" was saving the previous stack's SP instead of the current
r1. This patch fixes this by storing current r1 in the saved pt_regs.

GDB backtrace with vmcore of patched kernel:

--------
(gdb) bt
#0  0xc0000000002a53e8 in crash_setup_regs (oldregs=0x0, newregs=0xc00000000670b8d8)
    at ./arch/powerpc/include/asm/kexec.h:69
#1  __crash_kexec (regs=regs@entry=0x0) at kernel/kexec_core.c:974
#2  0xc000000000168918 in panic (fmt=fmt@entry=0xc000000001654a60 "sysrq triggered crash\n")
    at kernel/panic.c:358
#3  0xc000000000b735f8 in sysrq_handle_crash (key=<optimized out>) at drivers/tty/sysrq.c:155
#4  0xc000000000b742cc in __handle_sysrq (key=key@entry=99, check_mask=check_mask@entry=false)
    at drivers/tty/sysrq.c:602
#5  0xc000000000b7506c in write_sysrq_trigger (file=<optimized out>, buf=<optimized out>,
    count=2, ppos=<optimized out>) at drivers/tty/sysrq.c:1163
#6  0xc00000000069a7bc in pde_write (ppos=<optimized out>, count=<optimized out>,
    buf=<optimized out>, file=<optimized out>, pde=0xc00000000362cb40) at fs/proc/inode.c:340
#7  proc_reg_write (file=<optimized out>, buf=<optimized out>, count=<optimized out>,
    ppos=<optimized out>) at fs/proc/inode.c:352
#8  0xc0000000005b3bbc in vfs_write (file=file@entry=0xc000000006aa6b00,
    buf=buf@entry=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>,
    count=count@entry=2, pos=pos@entry=0xc00000000670bda0) at fs/read_write.c:582
#9  0xc0000000005b4264 in ksys_write (fd=<optimized out>,
    buf=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=2)
    at fs/read_write.c:637
#10 0xc00000000002ea2c in system_call_exception (regs=0xc00000000670be80, r0=<optimized out>)
    at arch/powerpc/kernel/syscall.c:171
#11 0xc00000000000c270 in system_call_vectored_common ()
    at arch/powerpc/kernel/interrupt_64.S:192
--------

Nick adds:
  So this now saves regs as though it was an interrupt taken in the
  caller, at the instruction after the call to ppc_save_regs, whereas
  previously the NIP was there, but R1 came from the caller's caller and
  that mismatch is what causes gdb's dwarf unwinder to go haywire.

Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Fixes: d16a58f8854b1 ("powerpc: Improve ppc_save_regs()")
Reivewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230615091047.90433-1-adityag@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: simplify ppc_save_regs

[ Upstream commit 37195b820d32c23bdefce3f460ed7de48a57e5e4 ]

Adjust the pt_regs pointer so the interrupt frame offsets can be used
to save registers.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-7-npiggin@gmail.com
Stable-dep-of: b684c09f09e7 ("powerpc: update ppc_save_regs to save current r1 in pt_regs")
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/powernv/sriov: perform null check on iov before dereferencing iov

[ Upstream commit f4f913c980bc6abe0ccfe88fe3909c125afe4a2d ]

Currently pointer iov is being dereferenced before the null check of iov
which can lead to null pointer dereference errors. Fix this by moving the
iov null check before the dereferencing.

Detected using cppcheck static analysis:
linux/arch/powerpc/platforms/powernv/pci-sriov.c:597:12: warning: Either
the condition '!iov' is redundant or there is possible null pointer
dereference: iov. [nullPointerRedundantCheck]
num_vfs = iov->num_vfs;
^

Fixes: 052da31d45fc ("powerpc/powernv/sriov: De-indent setup and teardown")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230608095849.1147969-1-colin.i.king@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: at91-pio4: check return value of devm_kasprintf()

[ Upstream commit f6fd5d4ff8ca0b24cee1af4130bcb1fa96b61aa0 ]

devm_kasprintf() returns a pointer to dynamically allocated memory.
Pointer could be NULL in case allocation fails. Check pointer validity.
Identified with coccinelle (kmerr.cocci script).

Fixes: 776180848b57 ("pinctrl: introduce driver for Atmel PIO4 controller")
Depends-on: 1c4e5c470a56 ("pinctrl: at91: use devm_kasprintf() to avoid potential leaks")
Depends-on: 5a8f9cf269e8 ("pinctrl: at91-pio4: use proper format specifier for unsigned int")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230615105333.585304-4-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: microchip-sgpio: check return value of devm_kasprintf()

[ Upstream commit 310cd4c206cd04696ccbfd1927b5ab6973e8cc8e ]

devm_kasprintf() returns a pointer to dynamically allocated memory.
Pointer could be NULL in case allocation fails. Check pointer validity.
Identified with coccinelle (kmerr.cocci script).

Fixes: 7e5ea974e61c ("pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230615105333.585304-3-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/64s: Fix VAS mm use after free

[ Upstream commit b4bda59b47879cce38a6ec5a01cd3cac702b5331 ]

The refcount on mm is dropped before the coprocessor is detached.

Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Fixes: 7bc6f71bdff5f ("powerpc/vas: Define and use common vas_window struct")
Fixes: b22f2d88e435c ("powerpc/pseries/vas: Integrate API with open/close windows")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230607101024.14559-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tool x86: Fix perf_env memory leak

[ Upstream commit 99d4850062a84564f36923764bb93935ef2ed108 ]

Found by leak sanitizer:
```
==1632594==ERROR: LeakSanitizer: detected memory leaks

Direct leak of 21 byte(s) in 1 object(s) allocated from:
    #0 0x7f2953a7077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439
    #1 0x556701d6fbbf in perf_env__read_cpuid util/env.c:369
    #2 0x556701d70589 in perf_env__cpuid util/env.c:465
    #3 0x55670204bba2 in x86__is_amd_cpu arch/x86/util/env.c:14
    #4 0x5567020487a2 in arch__post_evsel_config arch/x86/util/evsel.c:83
    #5 0x556701d8f78b in evsel__config util/evsel.c:1366
    #6 0x556701ef5872 in evlist__config util/record.c:108
    #7 0x556701cd6bcd in test__PERF_RECORD tests/perf-record.c:112
    #8 0x556701cacd07 in run_test tests/builtin-test.c:236
    #9 0x556701cacfac in test_and_print tests/builtin-test.c:265
    #10 0x556701cadddb in __cmd_test tests/builtin-test.c:402
    #11 0x556701caf2aa in cmd_test tests/builtin-test.c:559
    #12 0x556701d3b557 in run_builtin tools/perf/perf.c:323
    #13 0x556701d3bac8 in handle_internal_command tools/perf/perf.c:377
    #14 0x556701d3be90 in run_argv tools/perf/perf.c:421
    #15 0x556701d3c3f8 in main tools/perf/perf.c:537
    #16 0x7f2952a46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58

SUMMARY: AddressSanitizer: 21 byte(s) leaked in 1 allocation(s).
```

Fixes: f7b58cbdb3ff36eb ("perf mem/c2c: Add load store event mappings for AMD")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Ravi Bangoria <ravi.bangoria@amd.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20230613235416.1650755-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tool x86: Consolidate is_amd check into single function

[ Upstream commit 0cd1ca4650c9cf5f318110f67d39cbebae3693b3 ]

There are multiple places where x86 specific code determines AMD vs
Intel arch and acts based on that. Consolidate those checks into a
single function.

Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Link: https://lore.kernel.org/r/20230613095506.547-3-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 99d4850062a8 ("perf tool x86: Fix perf_env memory leak")
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86/dell/dell-rbtn: Fix resources leaking on error path

[ Upstream commit 966cca72ab20289083521a385fa56035d85a222d ]

Currently rbtn_add() in case of failure is leaking resources. Fix this
by adding a proper rollback. Move devm_kzalloc() before rbtn_acquire(),
so it doesn't require rollback in case of failure. While at it, remove
unnecessary assignment of NULL to device->driver_data and unnecessary
whitespace, plus add a break for the default case in a switch.

Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Suggested-by: Pali Rohár <pali@kernel.org>
Fixes: 817a5cdb40c8 ("dell-rbtn: Dell Airplane Mode Switch driver")
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20230613084310.2775896-1-michal.wilczynski@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf dwarf-aux: Fix off-by-one in die_get_varname()

[ Upstream commit 3abfcfd847717d232e36963f31a361747c388fe7 ]

The die_get_varname() returns "(unknown_type)" string if it failed to
find a type for the variable. But it had a space before the opening
parenthesis and it made the closing parenthesis cut off due to the
off-by-one in the string length (14).

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Fixes: 88fd633cdfa19060 ("perf probe: No need to use formatting strbuf method")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230612234102.3909116-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: thinkpad_acpi: Fix lkp-tests warnings for platform profiles

[ Upstream commit f999e23ce66c1555d7b653fba171a88ecee53704 ]

Fix issues identified in dytc_profile_refresh identified by lkp-tests.
drivers/platform/x86/thinkpad_acpi.c:10538
dytc_profile_refresh() error: uninitialized symbol 'funcmode'.
drivers/platform/x86/thinkpad_acpi.c:10531
dytc_profile_refresh() error: uninitialized symbol 'output'.
drivers/platform/x86/thinkpad_acpi.c:10537
dytc_profile_refresh() error: uninitialized symbol 'output'.

These issues should not lead to real problems in the field as the refresh
function should only be called if MMC or PSC mode enabled. But good to fix.

Thanks to Dan Carpenter and the lkp-tests project for flagging these.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202306011202.1hbgLRD4-lkp@intel.com/
Fixes: 1bc5d819f0b9 ("platform/x86: thinkpad_acpi: Fix profile modes on Intel platforms")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230606151804.8819-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf script: Fix allocation of evsel->priv related to per-event dump files

[ Upstream commit 36d3e4138e1b6cc9ab179f3f397b5548f8b1eaae ]

When printing output we may want to generate per event files, where the
--per-event-dump option should be used, creating perf.data.EVENT.dump
files instead of printing to stdout.

The callback thar processes event thus expects that evsel->priv->fp
should point to either the per-event FILE descriptor or to stdout.

The a3af66f51bd0bca7 ("perf script: Fix crash because of missing
evsel->priv") changeset fixed a case where evsel->priv wasn't setup,
thus set to NULL, causing a segfault when trying to access
evsel->priv->fp.

But it did it for the non --per-event-dump case by allocating a 'struct
perf_evsel_script' just to set its ->fp to stdout.

Since evsel->priv is only freed when --per-event-dump is used, we ended
up with a memory leak, detected using ASAN.

Fix it by using the same method as perf_script__setup_per_event_dump(),
and reuse that static 'struct perf_evsel_script'.

Also check if evsel_script__new() failed.

Fixes: a3af66f51bd0bca7 ("perf script: Fix crash because of missing evsel->priv")
Reported-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: https://lore.kernel.org/lkml/ZH+F0wGAWV14zvMP@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/signal32: Force inlining of __unsafe_save_user_regs() and save_tm_user_regs_unsafe()

[ Upstream commit a03b1a0b19398a47489fdcef02ec19c2ba05a15d ]

Looking at generated code for handle_signal32() shows calls to a
function called __unsafe_save_user_regs.constprop.0 while user access
is open.

And that __unsafe_save_user_regs.constprop.0 function has two nops at
the begining, allowing it to be traced, which is unexpected during
user access open window.

The solution could be to mark __unsafe_save_user_regs() no trace, but
to be on the safe side the most efficient is to flag it __always_inline
as already done for function __unsafe_restore_general_regs(). The
function is relatively small and only called twice, so the size
increase will remain in the noise.

Do the same with save_tm_user_regs_unsafe() as it may suffer the
same issue.

Fixes: ef75e7318294 ("powerpc/signal32: Transform save_user_regs() and save_tm_user_regs() in 'unsafe' version")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/7e469c8f01860a69c1ada3ca6a5e2aa65f0f74b2.1685955220.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/interrupt: Don't read MSR from interrupt_exit_kernel_prepare()

[ Upstream commit 0eb089a72fda3f7969e6277804bde75dc1474a14 ]

A disassembly of interrupt_exit_kernel_prepare() shows a useless read
of MSR register. This is shown by r9 being re-used immediately without
doing anything with the value read.

  c000e0e0:       60 00 00 00     nop
  c000e0e4:       7d 3a c2 a6     mfmd_ap r9
  c000e0e8:       7d 20 00 a6     mfmsr   r9
  c000e0ec:       7c 51 13 a6     mtspr   81,r2
  c000e0f0:       81 3f 00 84     lwz     r9,132(r31)
  c000e0f4:       71 29 80 00     andi.   r9,r9,32768

This is due to the use of local_irq_save(). The flags read by
local_irq_save() are never used, use local_irq_disable() instead.

Fixes: 13799748b957 ("powerpc/64: use interrupt restart table to speed up return from interrupt")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/df36c6205ab64326fb1b991993c82057e92ace2f.1685955214.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

kcsan: Don't expect 64 bits atomic builtins from 32 bits architectures

[ Upstream commit 353e7300a1db928e427462f2745f9a2cd1625b3d ]

Activating KCSAN on a 32 bits architecture leads to the following
link-time failure:

    LD      .tmp_vmlinux.kallsyms1
  powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_load':
  kernel/kcsan/core.c:1273: undefined reference to `__atomic_load_8'
  powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_store':
  kernel/kcsan/core.c:1273: undefined reference to `__atomic_store_8'
  powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_exchange':
  kernel/kcsan/core.c:1273: undefined reference to `__atomic_exchange_8'
  powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_add':
  kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_add_8'
  powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_sub':
  kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_sub_8'
  powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_and':
  kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_and_8'
  powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_or':
  kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_or_8'
  powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_xor':
  kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_xor_8'
  powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_nand':
  kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_nand_8'
  powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_compare_exchange_strong':
  kernel/kcsan/core.c:1273: undefined reference to `__atomic_compare_exchange_8'
  powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_compare_exchange_weak':
  kernel/kcsan/core.c:1273: undefined reference to `__atomic_compare_exchange_8'
  powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_compare_exchange_val':
  kernel/kcsan/core.c:1273: undefined reference to `__atomic_compare_exchange_8'

32 bits architectures don't have 64 bits atomic builtins. Only
include DEFINE_TSAN_ATOMIC_OPS(64) on 64 bits architectures.

Fixes: 0f8ad5f2e934 ("kcsan: Add support for atomic builtins")
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/d9c6afc28d0855240171a4e0ad9ffcdb9d07fceb.1683892665.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: npcm7xx: Add missing check for ioremap

[ Upstream commit ad64639417161e90b30dda00486570eb150aeee5 ]

Add check for ioremap() and return the error if it fails in order to
guarantee the success of ioremap().

Fixes: 3b588e43ee5c ("pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230607095829.1345-1-jiasheng@iscas.ac.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl:sunplus: Add check for kmalloc

[ Upstream commit 73f8ce7f961afcb3be49352efeb7c26cc1c00cc4 ]

Fix Smatch static checker warning:
potential null dereference 'configs'. (kmalloc returns null)

Changes in v2:
1. Add free allocated memory before returned -ENOMEM.
2. Add call of_node_put() before returned -ENOMEM.

Fixes: aa74c44be19c ("pinctrl: Add driver for Sunplus SP7021")
Signed-off-by: Wells Lu <wellslutw@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/1685277277-12209-1-git-send-email-wellslutw@gmail.com
[Rebased on the patch from Lu Hongfei]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: think-lmi: Correct NVME password handling

[ Upstream commit 4cebb42412248d28df6de01420cfac5654428d41 ]

NVME passwords identifier have been standardised across the Lenovo
systems and now use udrp and adrp (user and admin level) instead of
unvp and mnvp.

This should apparently be backwards compatible.

Fixes: 640a5fa50a42 ("platform/x86: think-lmi: Opcode support")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230601200552.4396-6-mpearson-lenovo@squebb.ca
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: think-lmi: Correct System password interface

[ Upstream commit 97eef5983372d7aee6549d644d788fd0c10d2b6e ]

The system password identification was incorrect. This means that if
the password was enabled it wouldn't be detected correctly; and setting
it would not work.
Also updated code to use TLMI_SMP_PWD instead of TLMI_SYS_PWD to be in
sync with Lenovo documentation.

Fixes: 640a5fa50a42 ("platform/x86: think-lmi: Opcode support")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230601200552.4396-3-mpearson-lenovo@squebb.ca
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: think-lmi: mutex protection around multiple WMI calls

[ Upstream commit c41e0121a1221894a1a9c4666156db9e1def4d6c ]

When an attribute is being changed if the Admin account is enabled, or if
a password is being updated then multiple WMI calls are needed.
Add mutex protection to ensure no race conditions are introduced.

Fixes: b49f72e7f96d ("platform/x86: think-lmi: Certificate authentication support")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230601200552.4396-1-mpearson-lenovo@squebb.ca
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: cherryview: Return correct value if pin in push-pull mode

[ Upstream commit 5835196a17be5cfdcad0b617f90cf4abe16951a4 ]

Currently the getter returns ENOTSUPP on pin configured in
the push-pull mode. Fix this by adding the missed switch case.

Fixes: ccdf81d08dbe ("pinctrl: cherryview: add option to set open-drain pin config")
Fixes: 6e08d6bbebeb ("pinctrl: Add Intel Cherryview/Braswell pin controller support")
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf bench: Add missing setlocale() call to allow usage of %'d style formatting

[ Upstream commit 16203e9cd01896b4244100a8e3fb9f6e612ab2b1 ]

Without this we were not getting the thousands separator for big
numbers.

Noticed while developing 'perf bench uprobe', but the use of %' predates
that, for instance 'perf bench syscall' uses it.

Before:

  # perf bench uprobe all
  # Running uprobe/baseline benchmark...
  # Executed 1000 usleep(1000) calls
       Total time: 1054082243ns

   1054082.243000 nsecs/op

  #

After:

  # perf bench uprobe all
  # Running uprobe/baseline benchmark...
  # Executed 1,000 usleep(1000) calls
       Total time: 1,053,715,144ns

   1,053,715.144000 nsecs/op

  #

Fixes: c2a08203052f8975 ("perf bench: Add basic syscall benchmark")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andre Fredette <anfredet@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Dave Tucker <datucker@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Derek Barbosa <debarbos@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/lkml/ZH3lcepZ4tBYr1jv@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Revise NPIV ELS unsol rcv cmpl logic to drop ndlp based on nlp_state

[ Upstream commit 9914a3d033d3e1d836a43e93e9738e7dd44a096a ]

When NPIV ports are zoned to devices that support both initiator and target
mode, a remote device's initiated PRLI results in unintended final kref
clean up of the device's ndlp structure. This disrupts NPIV ports'
discovery for target devices that support both initiator and target mode.

Modify the NPIV lpfc_drop_node clause such that we allow the ndlp to live
so long as it was in NLP_STE_PLOGI_ISSUE, NLP_STE_REG_LOGIN_ISSUE, or
NLP_STE_PRLI_ISSUE nlp_state. This allows lpfc's issued PRLI completion
routine to determine if the final kref clean up should execute rather than
a remote device's issued PRLI.

Fixes: db651ec22524 ("scsi: lpfc: Correct used_rpi count when devloss tmo fires with no recovery")
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230523183206.7728-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Add pci_clear_master() stub for non-CONFIG_PCI

[ Upstream commit 2aa5ac633259843f656eb6ecff4cf01e8e810c5e ]

Add a pci_clear_master() stub when CONFIG_PCI is not set so drivers that
support both PCI and platform devices don't need #ifdefs or extra Kconfig
symbols for the PCI parts.

[bhelgaas: commit log]
Fixes: 6a479079c072 ("PCI: Add pci_clear_master() as opposite of pci_set_master()")
Link: https://lore.kernel.org/r/20230531102744.2354313-1-suijingfeng@loongson.cn
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sunplus: Add check for kmalloc

[ Upstream commit a5961bed5429cf1134d7f539b4ed60317012f84d ]

Fix Smatch static checker warning:
potential null dereference 'configs'. (kmalloc returns null)

Fixes: aa74c44be19c ("pinctrl: Add driver for Sunplus SP7021")
Signed-off-by: Wells Lu <wellslutw@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/1685277277-12209-1-git-send-email-wellslutw@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: ftpci100: Release the clock resources

[ Upstream commit c60738de85f40b0b9f5cb23c21f9246e5a47908c ]

Smatch reported:
1. drivers/pci/controller/pci-ftpci100.c:526 faraday_pci_probe() warn:
'clk' from clk_prepare_enable() not released on lines: 442,451,462,478,512,517.
2. drivers/pci/controller/pci-ftpci100.c:526 faraday_pci_probe() warn:
'p->bus_clk' from clk_prepare_enable() not released on lines: 451,462,478,512,517.

The clock resource is obtained by devm_clk_get(), and then
clk_prepare_enable() makes the clock resource ready for use. After that,
clk_disable_unprepare() should be called to release the clock resource
when it is no longer needed. However, while doing some error handling
in faraday_pci_probe(), clk_disable_unprepare() is not called to release
clk and p->bus_clk before returning. These return lines are exactly 442,
451, 462, 478, 512, 517.

Fix this warning by replacing devm_clk_get() with devm_clk_get_enabled(),
which is equivalent to devm_clk_get() + clk_prepare_enable(). And with
devm_clk_get_enabled(), the clock will automatically be disabled,
unprepared and freed when the device is unbound from the bus.

Link: https://lore.kernel.org/r/20230508043641.23807-1-yejunyan@hust.edu.cn
Fixes: b3c433efb8a3 ("PCI: faraday: Fix wrong pointer passed to PTR_ERR()")
Fixes: 2eeb02b28579 ("PCI: faraday: Add clock handling")
Fixes: 783a862563f7 ("PCI: faraday: Use pci_parse_request_of_pci_ranges()")
Fixes: d3c68e0a7e34 ("PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driver")
Fixes: f1e8bd21e39e ("PCI: faraday: Convert IRQ masking to raw PCI config accessors")
Signed-off-by: Junyan Ye <yejunyan@hust.edu.cn>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>