i2c: iproc: handle master read request

[ Upstream commit e21d79778768e4e187b2892d662c6aaa01e1d399 ]

Handle single or multi byte master read request with or without
repeated start.

Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode")
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: iproc: update slave isr mask (ISR_MASK_SLAVE)

[ Upstream commit 603e77af7b0704bdb057de0368f1f2b04fc9552c ]

Update slave isr mask (ISR_MASK_SLAVE) to include remaining
two slave interrupts.

Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode")
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: iproc: handle only slave interrupts which are enabled

[ Upstream commit 545f4011e156554d704d6278245d54543f6680d1 ]

Handle only slave interrupts which are enabled.

The IS_OFFSET register contains the interrupt status bits which will be
set regardless of the enabling of the corresponding interrupt condition.
One must therefore look at both IS_OFFSET and IE_OFFSET to determine
whether an interrupt condition is set and enabled.

Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode")
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

quota: Fix memory leak when handling corrupted quota file

[ Upstream commit a4db1072e1a3bd7a8d9c356e1902b13ac5deb8ef ]

When checking corrupted quota file we can bail out and leak allocated
info structure. Properly free info structure on error return.

Reported-by: syzbot+77779c9b52ab78154b08@syzkaller.appspotmail.com
Fixes: 11c514a99bb9 ("quota: Sanity-check quota file headers on load")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: qrb5165-rb5: fix pm8009 regulators

[ Upstream commit c3da02421230639bf6ee5462b70b58f5b7f3b7c6 ]

Fix pm8009 compatibility string to reference pm8009 revision specific to
sm8250 platform. Also add S2 regulator to be used for qca639x.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: b1d2674e6121 ("arm64: dts: qcom: Add basic devicetree support for QRB5165 RB5")
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201231122348.637917-5-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: qcom-rpmh-regulator: add pm8009-1 chip revision

[ Upstream commit 951384cabc5dfb09251d440dbc26058eba86f97e ]

PM8009 has special revision (P=1), which is to be used for sm8250
platform. The major difference is the S2 regulator which supplies 0.95 V
instead of 2.848V. Declare regulators data to be used for this chip
revision. The datasheet calls the chip just pm8009-1, so use the same
name.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150")
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201231122348.637917-4-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/powerpc: Make the test check in eeh-basic.sh posix compliant

[ Upstream commit 3db380570af7052620ace20c29e244938610ca71 ]

The == operand is a bash extension, thus this will fail on Ubuntu
with:
  ./eeh-basic.sh: 89: test: 2: unexpected operator

As the /bin/sh on Ubuntu is pointed to DASH.

Use -eq to fix this posix compatibility issue.

Fixes: 996f9e0f93f162 ("selftests/powerpc: Fix eeh-basic.sh exit codes")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201228043459.14281-1-po-hsu.lin@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: meson: clk-pll: propagate the error from meson_clk_pll_set_rate()

[ Upstream commit ccdc1f0836f8e37b558a424f1e491f929b2e7ede ]

Popagate the error code from meson_clk_pll_set_rate() when the PLL does
not lock with the new settings.

Fixes: 722825dcd54b2e ("clk: meson: migrate plls clocks to clk_regmap")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201226121556.975418-4-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: meson: clk-pll: make "ret" a signed integer

[ Upstream commit 9e717285f0bd591d716fa0e7418f2cdaf756dd25 ]

The error codes returned by meson_clk_get_pll_settings() are all
negative. Make "ret" a signed integer in meson_clk_pll_set_rate() to
make it match with the clk_ops.set_rate API as well as the data type
returned by meson_clk_get_pll_settings().

Fixes: 8eed1db1adec6a ("clk: meson: pll: update driver for the g12a")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201226121556.975418-3-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: meson: clk-pll: fix initializing the old rate (fallback) for a PLL

[ Upstream commit 2f290b7c67adf6459a17a4c978102af35cd62e4a ]

The "rate" parameter in meson_clk_pll_set_rate() contains the new rate.
Retrieve the old rate with clk_hw_get_rate() so we don't inifinitely try
to switch from the new rate to the same rate again.

Fixes: 7a29a869434e8b ("clk: meson: Add support for Meson clock controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201226121556.975418-2-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: cpcap: Add missing IRQF_ONESHOT to fix regression

[ Upstream commit e62333e26be649bfc3c167b9f2bbca38b92332c5 ]

Commit 25d76fed7ffe ("phy: cpcap-usb: Use IRQF_ONESHOT") started causing
errors loading phy-cpcap-usb driver:

cpcap_battery cpcap_battery.0: failed to register power supply
genirq: Flags mismatch irq 211. 00002080 (se0conn) vs. 00000080 (se0conn)
cpcap-usb-phy cpcap-usb-phy.0: could not get irq se0conn: -16

Let's fix this by adding the missing IRQF_ONESHOT to also cpcap-battery
and cpcap-charger drivers.

Fixes: 25d76fed7ffe ("phy: cpcap-usb: Use IRQF_ONESHOT")
Reported-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HSI: Fix PM usage counter unbalance in ssi_hw_init

[ Upstream commit aa57e77b3d28f0df07149d88c47bc0f3aa77330b ]

pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.

Fixes: b209e047bc743 ("HSI: Introduce OMAP SSI driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

capabilities: Don't allow writing ambiguous v3 file capabilities

[ Upstream commit 95ebabde382c371572297915b104e55403674e73 ]

The v3 file capabilities have a uid field that records the filesystem
uid of the root user of the user namespace the file capabilities are
valid in.

When someone is silly enough to have the same underlying uid as the
root uid of multiple nested containers a v3 filesystem capability can
be ambiguous.

In the spirit of don't do that then, forbid writing a v3 filesystem
capability if it is ambiguous.

Fixes: 8db6c34f1dbc ("Introduce v3 namespaced file capabilities")
Reviewed-by: Andrew G. Morgan <morgan@kernel.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/display: remove hdcp_srm sysfs on device removal

[ Upstream commit e96b1b2974989c6a25507b527843ede7594efc85 ]

Fixes: 9037246bb2da5 ("drm/amd/display: Add sysfs interface for set/get srm")

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smp: Process pending softirqs in flush_smp_call_function_from_idle()

[ Upstream commit 66040b2d5d41f85cb1a752a75260595344c5ec3b ]

send_call_function_single_ipi() may wake an idle CPU without sending an
IPI. The woken up CPU will process the SMP-functions in
flush_smp_call_function_from_idle(). Any raised softirq from within the
SMP-function call will not be processed.
Should the CPU have no tasks assigned, then it will go back to idle with
pending softirqs and the NOHZ will rightfully complain.

Process pending softirqs on return from flush_smp_call_function_queue().

Fixes: b2a02fc43a1f4 ("smp: Optimize send_call_function_single_ipi()")
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210123201027.3262800-2-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/imx: IMX_INTMUX should not default to y, unconditionally

[ Upstream commit a890caeb2ba40ca183969230e204ab144f258357 ]

Merely enabling CONFIG_COMPILE_TEST should not enable additional code.
To fix this, restrict the automatic enabling of IMX_INTMUX to ARCH_MXC,
and ask the user in case of compile-testing.

Fixes: 66968d7dfc3f5451 ("irqchip: Add COMPILE_TEST support for IMX_INTMUX")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210208145605.422943-1-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

ubifs: Fix error return code in alloc_wbufs()

[ Upstream commit 42119dbe571eb419dae99b81dd20fa42f47464e1 ]

Fix to return PTR_ERR() error code from the error handling case instead
fo 0 in function alloc_wbufs(), as done elsewhere in this function.

Fixes: 6a98bc4614de ("ubifs: Add authentication nodes to journal")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ubifs: replay: Fix high stack usage, again

[ Upstream commit 410b6de702ef84fea6e7abcb6620ef8bfc112fae ]

An earlier commit moved out some functions to not be inlined by gcc, but
after some other rework to remove one of those, clang started inlining
the other one and ran into the same problem as gcc did before:

fs/ubifs/replay.c:1174:5: error: stack frame size of 1152 bytes in function 'ubifs_replay_journal' [-Werror,-Wframe-larger-than=]

Mark the function as noinline_for_stack to ensure it doesn't happen
again.

Fixes: f80df3851246 ("ubifs: use crypto_shash_tfm_digest()")
Fixes: eb66eff6636d ("ubifs: replay: Fix high stack usage")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ubifs: Fix memleak in ubifs_init_authentication

[ Upstream commit 11b8ab3836454a2600e396f34731e491b661f9d5 ]

When crypto_shash_digestsize() fails, c->hmac_tfm
has not been freed before returning, which leads
to memleak.

Fixes: 49525e5eecca5 ("ubifs: Add helper functions for authentication support")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jffs2: fix use after free in jffs2_sum_write_data()

[ Upstream commit 19646447ad3a680d2ab08c097585b7d96a66126b ]

clang static analysis reports this problem

fs/jffs2/summary.c:794:31: warning: Use of memory after it is freed
                c->summary->sum_list_head = temp->u.next;
                                            ^~~~~~~~~~~~

In jffs2_sum_write_data(), in a loop summary data is handles a node at
a time.  When it has written out the node it is removed the summary list,
and the node is deleted.  In the corner case when a
JFFS2_FEATURE_RWCOMPAT_COPY is seen, a call is made to
jffs2_sum_disable_collecting().  jffs2_sum_disable_collecting() deletes
the whole list which conflicts with the loop's deleting the list by parts.

To preserve the old behavior of stopping the write midway, bail out of
the loop after disabling summary collection.

Fixes: 6171586a7ae5 ("[JFFS2] Correct handling of JFFS2_FEATURE_RWCOMPAT_COPY nodes.")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/jfs: fix potential integer overflow on shift of a int

[ Upstream commit 4208c398aae4c2290864ba15c3dab7111f32bec1 ]

The left shift of int 32 bit integer constant 1 is evaluated using 32 bit
arithmetic and then assigned to a signed 64 bit integer. In the case where
l2nb is 32 or more this can lead to an overflow.  Avoid this by shifting
the value 1LL instead.

Addresses-Coverity: ("Uninitentional integer overflow")
Fixes: b40c2e665cd5 ("fs/jfs: TRIM support for JFS Filesystem")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: simple-card-utils: Fix device module clock

[ Upstream commit 1e30f642cf2939bbdac82ea0dd3071232670b5ab ]

If "clocks = <&xxx>" is specified from the CPU or Codec component
device node, the clock is not getting enabled. Thus audio playback
or capture fails.

Fix this by populating "simple_dai->clk" field when clocks property
is specified from device node as well. Also tidy up by re-organising
conditional statements of parsing logic.

Fixes: bb6fc620c2ed ("ASoC: simple-card-utils: add asoc_simple_card_parse_clk()")
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1612939421-19900-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ima: Free IMA measurement buffer after kexec syscall

[ Upstream commit f31e3386a4e92ba6eda7328cb508462956c94c64 ]

IMA allocates kernel virtual memory to carry forward the measurement
list, from the current kernel to the next kernel on kexec system call,
in ima_add_kexec_buffer() function.  This buffer is not freed before
completing the kexec system call resulting in memory leak.

Add ima_buffer field in "struct kimage" to store the virtual address
of the buffer allocated for the IMA measurement list.
Free the memory allocated for the IMA measurement list in
kimage_file_post_load_cleanup() function.

Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Fixes: 7b8589cc29e7 ("ima: on soft reboot, save the measurement list")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ima: Free IMA measurement buffer on error

[ Upstream commit 6d14c6517885fa68524238787420511b87d671df ]

IMA allocates kernel virtual memory to carry forward the measurement
list, from the current kernel to the next kernel on kexec system call,
in ima_add_kexec_buffer() function.  In error code paths this memory
is not freed resulting in memory leak.

Free the memory allocated for the IMA measurement list in
the error code paths in ima_add_kexec_buffer() function.

Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Fixes: 7b8589cc29e7 ("ima: on soft reboot, save the measurement list")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: sof-pci-dev: add missing Up-Extreme quirk

[ Upstream commit bd8036eb15263a720b8f846861c180b27d050a09 ]

The UpExtreme board supports the community key and was missed in
previous contributions. Add it to make sure the open firmware is
picked by default without needing a symlink on the target.

Fixes: 46207ca24545 ('ASoC: SOF: pci: change the default firmware path when the community key is used')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210208231853.58761-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet: set status to 0 in case for invalid nsid

[ Upstream commit 40244ad36bcfb796a6bb9e95bdcbf8ddf3134509 ]

For unallocated namespace in nvmet_execute_identify_ns() don't set the
status to NVME_SC_INVALID_NS, set it to zero.

Fixes: bffcd507780e ("nvmet: set right status on error in id-ns handler")
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet: remove extra variable in identify ns

[ Upstream commit 3c7b224f1956ed232b24ed2eb2c54e4476c6acb2 ]

We remove the extra local variable struct nvmet_ns in
nvmet_execute_identify_ns() since req already has ns member that can be
reused, this also eliminates the explicit call to nvmet_put_namespace()
which is already present in the request completion path.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-multipath: set nr_zones for zoned namespaces

[ Upstream commit 73a1a2298f3e9df24cea7a9aab412ba9470f6159 ]

The bio based drivers only require the request_queue's nr_zones is set,
so set this field in the head if the namespace path is zoned.

Fixes: 240e6ee272c07 ("nvme: support for zoned namespaces")
Reported-by: Minwoo Im <minwoo.im.dev@gmail.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet-tcp: fix potential race of tcp socket closing accept_work

[ Upstream commit 0fbcfb089a3f2f2a731d01f0aec8f7697a849c28 ]

When we accept a TCP connection and allocate an nvmet-tcp queue we should
make sure not to fully establish it or reference it as the connection may
be already closing, which triggers queue release work, which does not
fence against queue establishment.

In order to address such a race, we make sure to check the sk_state and
contain the queue reference to be done underneath the sk_callback_lock
such that the queue release work correctly fences against it.

Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver")
Reported-by: Elad Grupi <elad.grupi@dell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet-tcp: fix receive data digest calculation for multiple h2cdata PDUs

[ Upstream commit fda871c0ba5d2eed2cd1c881573168129da70058 ]

When a host sends multiple h2cdata PDUs for a single command, we
should verify the data digest calculation per PDU and not
per command.

Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver")
Reported-by: Narayan Ayalasomayajula <Narayan.Ayalasomayajula@wdc.com>
Tested-by: Narayan Ayalasomayajula <Narayan.Ayalasomayajula@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: fix possible deadlock in io_uring_poll

[ Upstream commit ed670c3f90a67d9e16ab6d8893be6f072d79cd4c ]

Abaci reported follow issue:

[   30.615891] ======================================================
[   30.616648] WARNING: possible circular locking dependency detected
[   30.617423] 5.11.0-rc3-next-20210115 #1 Not tainted
[   30.618035] ------------------------------------------------------
[   30.618914] a.out/1128 is trying to acquire lock:
[   30.619520] ffff88810b063868 (&ep->mtx){+.+.}-{3:3}, at: __ep_eventpoll_poll+0x9f/0x220
[   30.620505]
[   30.620505] but task is already holding lock:
[   30.621218] ffff88810e952be8 (&ctx->uring_lock){+.+.}-{3:3}, at: __x64_sys_io_uring_enter+0x3f0/0x5b0
[   30.622349]
[   30.622349] which lock already depends on the new lock.
[   30.622349]
[   30.623289]
[   30.623289] the existing dependency chain (in reverse order) is:
[   30.624243]
[   30.624243] -> #1 (&ctx->uring_lock){+.+.}-{3:3}:
[   30.625263]        lock_acquire+0x2c7/0x390
[   30.625868]        __mutex_lock+0xae/0x9f0
[   30.626451]        io_cqring_overflow_flush.part.95+0x6d/0x70
[   30.627278]        io_uring_poll+0xcb/0xd0
[   30.627890]        ep_item_poll.isra.14+0x4e/0x90
[   30.628531]        do_epoll_ctl+0xb7e/0x1120
[   30.629122]        __x64_sys_epoll_ctl+0x70/0xb0
[   30.629770]        do_syscall_64+0x2d/0x40
[   30.630332]        entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   30.631187]
[   30.631187] -> #0 (&ep->mtx){+.+.}-{3:3}:
[   30.631985]        check_prevs_add+0x226/0xb00
[   30.632584]        __lock_acquire+0x1237/0x13a0
[   30.633207]        lock_acquire+0x2c7/0x390
[   30.633740]        __mutex_lock+0xae/0x9f0
[   30.634258]        __ep_eventpoll_poll+0x9f/0x220
[   30.634879]        __io_arm_poll_handler+0xbf/0x220
[   30.635462]        io_issue_sqe+0xa6b/0x13e0
[   30.635982]        __io_queue_sqe+0x10b/0x550
[   30.636648]        io_queue_sqe+0x235/0x470
[   30.637281]        io_submit_sqes+0xcce/0xf10
[   30.637839]        __x64_sys_io_uring_enter+0x3fb/0x5b0
[   30.638465]        do_syscall_64+0x2d/0x40
[   30.638999]        entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   30.639643]
[   30.639643] other info that might help us debug this:
[   30.639643]
[   30.640618]  Possible unsafe locking scenario:
[   30.640618]
[   30.641402]        CPU0                    CPU1
[   30.641938]        ----                    ----
[   30.642664]   lock(&ctx->uring_lock);
[   30.643425]                                lock(&ep->mtx);
[   30.644498]                                lock(&ctx->uring_lock);
[   30.645668]   lock(&ep->mtx);
[   30.646321]
[   30.646321]  *** DEADLOCK ***
[   30.646321]
[   30.647642] 1 lock held by a.out/1128:
[   30.648424]  #0: ffff88810e952be8 (&ctx->uring_lock){+.+.}-{3:3}, at: __x64_sys_io_uring_enter+0x3f0/0x5b0
[   30.649954]
[   30.649954] stack backtrace:
[   30.650592] CPU: 1 PID: 1128 Comm: a.out Not tainted 5.11.0-rc3-next-20210115 #1
[   30.651554] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[   30.652290] Call Trace:
[   30.652688]  dump_stack+0xac/0xe3
[   30.653164]  check_noncircular+0x11e/0x130
[   30.653747]  ? check_prevs_add+0x226/0xb00
[   30.654303]  check_prevs_add+0x226/0xb00
[   30.654845]  ? add_lock_to_list.constprop.49+0xac/0x1d0
[   30.655564]  __lock_acquire+0x1237/0x13a0
[   30.656262]  lock_acquire+0x2c7/0x390
[   30.656788]  ? __ep_eventpoll_poll+0x9f/0x220
[   30.657379]  ? __io_queue_proc.isra.88+0x180/0x180
[   30.658014]  __mutex_lock+0xae/0x9f0
[   30.658524]  ? __ep_eventpoll_poll+0x9f/0x220
[   30.659112]  ? mark_held_locks+0x5a/0x80
[   30.659648]  ? __ep_eventpoll_poll+0x9f/0x220
[   30.660229]  ? _raw_spin_unlock_irqrestore+0x2d/0x40
[   30.660885]  ? trace_hardirqs_on+0x46/0x110
[   30.661471]  ? __io_queue_proc.isra.88+0x180/0x180
[   30.662102]  ? __ep_eventpoll_poll+0x9f/0x220
[   30.662696]  __ep_eventpoll_poll+0x9f/0x220
[   30.663273]  ? __ep_eventpoll_poll+0x220/0x220
[   30.663875]  __io_arm_poll_handler+0xbf/0x220
[   30.664463]  io_issue_sqe+0xa6b/0x13e0
[   30.664984]  ? __lock_acquire+0x782/0x13a0
[   30.665544]  ? __io_queue_proc.isra.88+0x180/0x180
[   30.666170]  ? __io_queue_sqe+0x10b/0x550
[   30.666725]  __io_queue_sqe+0x10b/0x550
[   30.667252]  ? __fget_files+0x131/0x260
[   30.667791]  ? io_req_prep+0xd8/0x1090
[   30.668316]  ? io_queue_sqe+0x235/0x470
[   30.668868]  io_queue_sqe+0x235/0x470
[   30.669398]  io_submit_sqes+0xcce/0xf10
[   30.669931]  ? xa_load+0xe4/0x1c0
[   30.670425]  __x64_sys_io_uring_enter+0x3fb/0x5b0
[   30.671051]  ? lockdep_hardirqs_on_prepare+0xde/0x180
[   30.671719]  ? syscall_enter_from_user_mode+0x2b/0x80
[   30.672380]  do_syscall_64+0x2d/0x40
[   30.672901]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   30.673503] RIP: 0033:0x7fd89c813239
[   30.673962] Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05  3d 01 f0 ff ff 73 01 c3 48 8b 0d 27 ec 2c 00 f7 d8 64 89 01 48
[   30.675920] RSP: 002b:00007ffc65a7c628 EFLAGS: 00000217 ORIG_RAX: 00000000000001aa
[   30.676791] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fd89c813239
[   30.677594] RDX: 0000000000000000 RSI: 0000000000000014 RDI: 0000000000000003
[   30.678678] RBP: 00007ffc65a7c720 R08: 0000000000000000 R09: 0000000003000000
[   30.679492] R10: 0000000000000000 R11: 0000000000000217 R12: 0000000000400ff0
[   30.680282] R13: 00007ffc65a7c840 R14: 0000000000000000 R15: 0000000000000000

This might happen if we do epoll_wait on a uring fd while reading/writing
the former epoll fd in a sqe in the former uring instance.
So let's don't flush cqring overflow list, just do a simple check.

Reported-by: Abaci <abaci@linux.alibaba.com>
Fixes: 6c503150ae33 ("io_uring: patch up IOPOLL overflow_flush sync")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ecdh_helper - Ensure 'len >= secret.len' in decode_key()

[ Upstream commit a53ab94eb6850c3657392e2d2ce9b38c387a2633 ]

The length ('len' parameter) passed to crypto_ecdh_decode_key() is never
checked against the length encoded in the passed buffer ('buf'
parameter). This could lead to an out-of-bounds access when the passed
length is less than the encoded length.

Add a check to prevent that.

Fixes: 3c4b23901a0c7 ("crypto: ecdh - Add ECDH software support")
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwrng: timeriomem - Fix cooldown period calculation

[ Upstream commit e145f5565dc48ccaf4cb50b7cfc48777bed8c100 ]

Ensure cooldown period tolerance of 1% is actually accounted for.

Fixes: ca3bff70ab32 ("hwrng: timeriomem - Improve performance...")
Signed-off-by: Jan Henrik Weinstock <jan.weinstock@rwth-aachen.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/dp_mst: Don't cache EDIDs for physical ports

[ Upstream commit 4b8878eefa0a3b65e2e016db49014ea66fb9fd45 ]

Caching EDIDs for physical ports prevents updating the EDID if a port
gets reconnected via a Connection Status Notification message, fix this.

Fixes: db1a07956968 ("drm/dp_mst: Handle SST-only branch device case")
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-2-imre.deak@intel.com
(cherry picked from commit 468091531c2e5c49f55d8c6f1d036ce997d24e13)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/lima: fix reference leak in lima_pm_busy

[ Upstream commit de4248b744e8394f239c0dd0af34088399d27d94 ]

pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to putting operation will result in a
reference leak here.

A new function pm_runtime_resume_and_get is introduced in
[0] to keep usage counter balanced. So We fix the reference
leak by replacing it with new function.

[0] commit dd8088d5a896 ("PM: runtime: Add  pm_runtime_resume_and_get to deal with usage counter")

Fixes: 50de2e9ebbc0 ("drm/lima: enable runtime pm")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127094438.121003-1-miaoqinglang@huawei.com
(cherry picked from commit de499781c97d96703af8a32d2b5e37fdb5b51568)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: hdmi: Update the CEC clock divider on HSM rate change

[ Upstream commit 47fa9a80270e20a0c4ddaffca1f144d22cc59620 ]

As part of the enable sequence we might change the HSM clock rate if the
pixel rate is different than the one we were already dealing with.

On the BCM2835 however, the CEC clock derives from the HSM clock so any
rate change will need to be reflected in the CEC clock divider to output
40kHz.

Fixes: cd4cb49dc5bb ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-8-maxime@cerno.tech
(cherry picked from commit a9dd0b9a5c3e11c79e6ff9c7fdf07c471732dcb6)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: hdmi: Compute the CEC clock divider from the clock rate

[ Upstream commit 163a3ef681e5e9d5df558e855d86ccd4708d6200 ]

The CEC clock divider needs to output a frequency of 40kHz from the HSM
rate on the BCM2835. The driver used to have a fixed frequency for it,
but that changed for the BCM2711 and we now need to compute it
dynamically to maintain the proper rate.

Fixes: cd4cb49dc5bb ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-7-maxime@cerno.tech
(cherry picked from commit f1ceb9d10043683b89e5e5e5848fb4e855295762)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: hdmi: Restore cec physical address on reconnect

[ Upstream commit 4d8602b8ec16f5721a4d1339c610a81f95df1856 ]

Currently we call cec_phys_addr_invalidate on a hotplug deassert.
That may be due to a TV power cycling, or an AVR being switched
on (and switching edid).

This makes CEC unusable since our controller wouldn't have a physical
address anymore.

Set it back up again on the hotplug assert.

Fixes: 15b4511a4af6 ("drm/vc4: add HDMI CEC support")
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-6-maxime@cerno.tech
(cherry picked from commit b06eecb5158e5f3eb47b9d05aea8c259985cc5f7)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: hdmi: Fix up CEC registers

[ Upstream commit 5a32bfd563e8b5766e57475c2c81c769e5a13f5d ]

The commit 311e305fdb4e ("drm/vc4: hdmi: Implement a register layout
abstraction") forgot one CEC register, and made a copy and paste mistake
for another one. Fix those mistakes.

Fixes: 311e305fdb4e ("drm/vc4: hdmi: Implement a register layout abstraction")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-5-maxime@cerno.tech
(cherry picked from commit 303085bc11bb7aebeeaaf09213f99fd7aa539a34)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: hdmi: Fix register offset with longer CEC messages

[ Upstream commit 4a59ed546c0511f01a4bf6b886fe34b6cce2513f ]

The code prior to 311e305fdb4e ("drm/vc4: hdmi: Implement a register
layout abstraction") was relying on the fact that the register offset
was incremented by 4 for each readl call. That worked since the register
width is 4 bytes.

However, since that commit the HDMI_READ macro is now taking an enum,
and the offset doesn't increment by 4 but 1 now. Divide the index by 4
to fix this.

Fixes: 311e305fdb4e ("drm/vc4: hdmi: Implement a register layout abstraction")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-4-maxime@cerno.tech
(cherry picked from commit e9c9481f373eb7344f9e973eb28fc6e9d0f46485)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vc4: hdmi: Move hdmi reset to bind

[ Upstream commit 902dc5c19a8fecd3113dd41cc601b34557bdede9 ]

The hdmi reset got moved to a later point in the commit 9045e91a476b
("drm/vc4: hdmi: Add reset callback").

However, the reset now occurs after vc4_hdmi_cec_init and so tramples
the setup of registers like HDMI_CEC_CNTRL_1

This only affects pi0-3 as on pi4 the cec registers are in a separate
block

Fixes: 9045e91a476b ("drm/vc4: hdmi: Add reset callback")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-3-maxime@cerno.tech
(cherry picked from commit 7155334f15f360f5c98391c5c7e12af4c13395c4)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/zcrypt: return EIO when msg retry limit reached

[ Upstream commit d39fae45c97c67b1b4da04773f2bb5a2f29088c4 ]

When a msg is retried because the lower ap layer returns -EAGAIN
there is a retry limit (currently 10). When this limit is reached
the last return code from the lower layer is returned, causing
the userspace to get -1 on the ioctl with errno EAGAIN.

This EAGAIN is misleading here. After 10 retry attempts the
userspace should receive a clear failure indication like EINVAL
or EIO or ENODEV. However, the reason why these retries all
fail is unclear. On an invalid message EINVAL would be returned
by the lower layer, and if devices go away or are not available
an ENODEV is seen. So this patch now reworks the retry loops
to return EIO to userspace when the retry limit is reached.

Fixes: 91ffc519c199 ("s390/zcrypt: introduce msg tracking in zcrypt functions")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86: Restore all 64 bits of DR6 and DR7 during RSM on x86-64

[ Upstream commit 2644312052d54e2e7543c7d186899a36ed22f0bf ]

Restore the full 64-bit values of DR6 and DR7 when emulating RSM on
x86-64, as defined by both Intel's SDM and AMD's APM.

Note, bits 63:32 of DR6 and DR7 are reserved, so this is a glorified nop
unless the SMM handler is poking into SMRAM, which it most definitely
shouldn't be doing since both Intel and AMD list the DR6 and DR7 fields
as read-only.

Fixes: 660a5d517aaa ("KVM: x86: save/load state on SMM switch")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210205012458.3872687-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix double accounting of ordered extent for subpage case in btrfs_invalidapge

[ Upstream commit 951c80f83d61bd4b21794c8aba829c3c1a45c2d0 ]

Commit dbfdb6d1b369 ("Btrfs: Search for all ordered extents that could
span across a page") make btrfs_invalidapage() to search all ordered
extents.

The offending code looks like this:

  again:
  start = page_start;
  ordered = btrfs_lookup_ordered_range(inode, start, page_end - start + 1);
  if (ordred) {
  end = min(page_end,
    ordered->file_offset + ordered->num_bytes - 1);

  /* Do the cleanup */

  start = end + 1;
  if (start < page_end)
  goto again;
  }

The behavior is indeed necessary for the incoming subpage support, but
when it iterates through all the ordered extents, it also resets the
search range @start.

This means, for the following cases, we can double account the ordered
extents, causing its bytes_left underflow:

Page offset
0 16K 32K
|<--- OE 1  --->|<--- OE 2 ---->|

As the first iteration will find ordered extent (OE) 1, which doesn't
cover the full page, thus after cleanup code, we need to retry again.
But again label will reset start to page_start, and we got OE 1 again,
which causes double accounting on OE 1, and cause OE 1's byte_left to
underflow.

This problem can only happen for subpage case, as for regular sectorsize
== PAGE_SIZE case, we will always find a OE ends at or after page end,
thus no way to trigger the problem.

Move the again label after start = page_start.  There will be more
comprehensive rework to convert the open coded loop to a proper while
loop for subpage support.

Fixes: dbfdb6d1b369 ("Btrfs: Search for all ordered extents that could span across a page")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: clarify error returns values in __load_free_space_cache

[ Upstream commit 3cc64e7ebfb0d7faaba2438334c43466955a96e8 ]

Return value in __load_free_space_cache is not properly set after
(unlikely) memory allocation failures and 0 is returned instead.
This is not a problem for the caller load_free_space_cache because only
value 1 is considered as 'cache loaded' but for clarity it's better
to set the errors accordingly.

Fixes: a67509c30079 ("Btrfs: add a io_ctl struct and helpers for dealing with the space cache")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: debug: Fix a potential issue on string buffer termination

[ Upstream commit 9037c3bde65d339017ef41d81cb58069ffc321d4 ]

The function simple_write_to_buffer() doesn't add string termination
at the end of buf, we need to handle it on our own. This change refers
to the function tokenize_input() in debug.c and the function
sof_dfsentry_trace_filter_write() in trace.c.

Fixes: 091c12e1f50c ("ASoC: SOF: debug: add new debugfs entries for IPC flood test")
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210208103857.75705-1-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rt5682: Fix panic in rt5682_jack_detect_handler happening during system shutdown

[ Upstream commit 45a2702ce10993eda7a5b12690294782d565519c ]

During Coldboot stress tests, system encountered the following panic.
Panic logs depicts rt5682_i2c_shutdown() happened first and then later
jack detect handler workqueue function triggered.
This situation causes panic as rt5682_i2c_shutdown() resets codec.
Fix this panic by cancelling all jack detection delayed work.

Panic log:
[   20.936124] sof_pci_shutdown
[   20.940248] snd_sof_device_shutdown
[   20.945023] snd_sof_shutdown
[   21.126849] rt5682_i2c_shutdown
[   21.286053] rt5682_jack_detect_handler
[   21.291235] BUG: kernel NULL pointer dereference, address: 000000000000037c
[   21.299302] #PF: supervisor read access in kernel mode
[   21.305254] #PF: error_code(0x0000) - not-present page
[   21.311218] PGD 0 P4D 0
[   21.314155] Oops: 0000 [#1] PREEMPT SMP NOPTI
[   21.319206] CPU: 2 PID: 123 Comm: kworker/2:3 Tainted: G     U            5.4.68 #10
[   21.333687] ACPI: Preparing to enter system sleep state S5
[   21.337669] Workqueue: events_power_efficient rt5682_jack_detect_handler [snd_soc_rt5682]
[   21.337671] RIP: 0010:rt5682_jack_detect_handler+0x6c/0x279 [snd_soc_rt5682]

Fixes: a50067d4f3c1d ('ASoC: rt5682: split i2c driver into separate module')
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
Reviewed-by: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210205171428.2344210-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: lpass: Fix i2s ctl register bit map

[ Upstream commit 5e3277ab3baff6db96ae44adf6f85d6f0f6502cc ]

Fix bitwidth mapping in i2s ctl register per APQ8016 document.

Fixes: b5022a36d28f ("ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers")
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Link: https://lore.kernel.org/r/20210201132941.460360-1-jun.nie@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

locking/lockdep: Avoid unmatched unlock

[ Upstream commit 7f82e631d236cafd28518b998c6d4d8dc2ef68f6 ]

Commit f6f48e180404 ("lockdep: Teach lockdep about "USED" <- "IN-NMI"
inversions") overlooked that print_usage_bug() releases the graph_lock
and called it without the graph lock held.

Fixes: f6f48e180404 ("lockdep: Teach lockdep about "USED" <- "IN-NMI" inversions")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/YBfkuyIfB1+VRxXP@hirez.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: sof_sdw: add missing TGL_HDMI quirk for Dell SKU 0A3E

[ Upstream commit 5ab3ff4d66960be766a544886667e7c002f17fd6 ]

We missed adding the TGL_HDMI quirk which is very much needed to
expose the 4 display pipelines and will be required on TGL topologies.

Fixes: e787f5b5b1406 ('ASoC: Intel: add support for new SoundWire hardware layout on TGL')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210204203312.27112-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: sof_sdw: add missing TGL_HDMI quirk for Dell SKU 0A5E

[ Upstream commit f12bbc50f3b14c9b8ed902c6d1da980dd5addcce ]

We missed adding the TGL_HDMI quirk which is very much needed to
expose the 4 display pipelines and will be required on TGL topologies.

Fixes: 9ad9bc59dde10 ('ASoC: Intel: sof_sdw: set proper flags for Dell TGL-H SKU 0A5E')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210204203312.27112-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Drivers: hv: vmbus: Avoid use-after-free in vmbus_onoffer_rescind()

[ Upstream commit e3fa4b747f085d2cda09bba0533b86fa76038635 ]

When channel->device_obj is non-NULL, vmbus_onoffer_rescind() could
invoke put_device(), that will eventually release the device and free
the channel object (cf. vmbus_device_release()).  However, a pointer
to the object is dereferenced again later to load the primary_channel.
The use-after-free can be avoided by noticing that this load/check is
redundant if device_obj is non-NULL: primary_channel must be NULL if
device_obj is non-NULL, cf. vmbus_add_channel_work().

Fixes: 54a66265d6754b ("Drivers: hv: vmbus: Fix rescind handling")
Reported-by: Juan Vazquez <juvazq@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20201209070827.29335-5-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: Check if fb is null

[ Upstream commit b1d685b6467ac0d98fc63989f71b4ca9186be5d4 ]

It's possible that state->base.fb is null. Add a check before access its
format.

Fixes: b6b1bb980ec4 ("drm/mediatek: Turn off Alpha bit when plane format has no alpha")
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: nSVM: Don't strip host's C-bit from guest's CR3 when reading PDPTRs

[ Upstream commit 2732be90235347a3be4babdc9f88a1ea93970b0b ]

Don't clear the SME C-bit when reading a guest PDPTR, as the GPA (CR3) is
in the guest domain.

Barring a bizarre paravirtual use case, this is likely a benign bug.  SME
is not emulated by KVM, loading SEV guest PDPTRs is doomed as KVM can't
use the correct key to read guest memory, and setting guest MAXPHYADDR
higher than the host, i.e. overlapping the C-bit, would cause faults in
the guest.

Note, for SEV guests, stripping the C-bit is technically aligned with CPU
behavior, but for KVM it's the greater of two evils.  Because KVM doesn't
have access to the guest's encryption key, ignoring the C-bit would at
best result in KVM reading garbage.  By keeping the C-bit, KVM will
fail its read (unless userspace creates a memslot with the C-bit set).
The guest will still undoubtedly die, as KVM will use '0' for the PDPTR
value, but that's preferable to interpreting encrypted data as a PDPTR.

Fixes: d0ec49d4de90 ("kvm/x86/svm: Support Secure Memory Encryption within KVM")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210204000117.3303214-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: Fix typo error in HDMI regmap config callbacks

[ Upstream commit e681b1a6d706b4e54c3847bb822531b4660234f3 ]

Had a typo in lpass platform driver that resulted in crash
during suspend/resume with an HDMI dongle connected.

The regmap read/write/volatile regesters validation callbacks in lpass-cpu
were using MI2S rdma_channels count instead of hdmi_rdma_channels.

This typo error causing to read registers from the regmap beyond the length
of the mapping created by ioremap().

This fix avoids the need for reducing number hdmi_rdma_channels,
which is done in
commit 7dfe20ee92f6 ("ASoC: qcom: Fix number of HDMI RDMA channels on sc7180").
So reverting the same.

Fixes: 7cb37b7bd0d3c ("ASoC: qcom: Add support for lpass hdmi driver")
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/20210202062727.22469-1-srivasam@codeaurora.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix a wrong condition in __submit_bio

[ Upstream commit 39f71b7e40e21805d6b15fc7750bdd9cab6a5010 ]

We should use !F2FS_IO_ALIGNED() to check and submit_io directly.

Fixes: 8223ecc456d0 ("f2fs: fix to add missing F2FS_IO_ALIGNED() condition")
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Dehe Gu <gudehe@huawei.com>
Signed-off-by: Ge Qiu <qiuge@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Prevent shift wrapping in amdgpu_read_mask()

[ Upstream commit c915ef890d5dc79f483e1ca3b3a5b5f1a170690c ]

If the user passes a "level" value which is higher than 31 then that
leads to shift wrapping.  The undefined behavior will lead to a
syzkaller stack dump.

Fixes: 5632708f4452 ("drm/amd/powerplay: add dpm force multiple levels on cz/tonga/fiji/polaris (v2)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to avoid inconsistent quota data

[ Upstream commit 25fb04dbce6a0e165d28fd1fa8a1d7018c637fe8 ]

Occasionally, quota data may be corrupted detected by fsck:

Info: checkpoint state = 45 :  crc compacted_summary unmount
[QUOTA WARNING] Usage inconsistent for ID 0:actual (1543036928, 762) != expected (1543032832, 762)
[ASSERT] (fsck_chk_quota_files:1986)  --> Quota file is missing or invalid quota file content found.
[QUOTA WARNING] Usage inconsistent for ID 0:actual (1352478720, 344) != expected (1352474624, 344)
[ASSERT] (fsck_chk_quota_files:1986)  --> Quota file is missing or invalid quota file content found.

[FSCK] Unreachable nat entries                        [Ok..] [0x0]
[FSCK] SIT valid block bitmap checking                [Ok..]
[FSCK] Hard link checking for regular file            [Ok..] [0x0]
[FSCK] valid_block_count matching with CP             [Ok..] [0xdf299]
[FSCK] valid_node_count matcing with CP (de lookup)   [Ok..] [0x2b01]
[FSCK] valid_node_count matcing with CP (nat lookup)  [Ok..] [0x2b01]
[FSCK] valid_inode_count matched with CP              [Ok..] [0x2665]
[FSCK] free segment_count matched with CP             [Ok..] [0xcb04]
[FSCK] next block offset is free                      [Ok..]
[FSCK] fixing SIT types
[FSCK] other corrupted bugs                           [Fail]

The root cause is:
If we open file w/ readonly flag, disk quota info won't be initialized
for this file, however, following mmap() will force to convert inline
inode via f2fs_convert_inline_inode(), which may increase block usage
for this inode w/o updating quota data, it causes inconsistent disk quota
info.

The issue will happen in following stack:
open(file, O_RDONLY)
mmap(file)
- f2fs_convert_inline_inode
 - f2fs_convert_inline_page
  - f2fs_reserve_block
   - f2fs_reserve_new_block
    - f2fs_reserve_new_blocks
     - f2fs_i_blocks_write
      - dquot_claim_block
inode->i_blocks increase, but the dqb_curspace keep the size for the dquots
is NULL.

To fix this issue, let's call dquot_initialize() anyway in both
f2fs_truncate() and f2fs_convert_inline_inode() functions to avoid potential
inconsistent quota data issue.

Fixes: 0abd675e97e6 ("f2fs: support plain user/group quota")
Signed-off-by: Daiyue Zhang <zhangdaiyue1@huawei.com>
Signed-off-by: Dehe Gu <gudehe@huawei.com>
Signed-off-by: Junchao Jiang <jiangjunchao1@huawei.com>
Signed-off-by: Ge Qiu <qiuge@huawei.com>
Signed-off-by: Yi Chen <chenyi77@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: parsers: afs: Fix freeing the part name memory in failure

[ Upstream commit 7b844cf445f0a7daa68be0ce71eb2c88d68b0c5d ]

In the case of failure while parsing the partitions, the iterator should
be pre decremented by one before starting to free the memory allocated
by kstrdup(). Because in the failure case, kstrdup() will not succeed
and thus no memory will be allocated for the current iteration.

Fixes: 1fca1f6abb38 ("mtd: afs: simplify partition parsing")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210104041137.113075-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: codecs: add missing max_register in regmap config

[ Upstream commit e8820dbddbcad7e91daacf7d42a49d1d04a4e489 ]

For some reason setting max_register was missed from regmap_config.
Without this cat /sys/kernel/debug/regmap/sdw:0:217:2010:0:1/range
actually throws below Warning.

WARNING: CPU: 7 PID: 540 at drivers/base/regmap/regmap-debugfs.c:160
 regmap_debugfs_get_dump_start.part.10+0x1e0/0x220
...
Call trace:
 regmap_debugfs_get_dump_start.part.10+0x1e0/0x220
 regmap_reg_ranges_read_file+0xc0/0x2e0
 full_proxy_read+0x64/0x98
 vfs_read+0xa8/0x1e0
 ksys_read+0x6c/0x100
 __arm64_sys_read+0x1c/0x28
 el0_svc_common.constprop.3+0x6c/0x190
 do_el0_svc+0x24/0x90
 el0_svc+0x14/0x20
 el0_sync_handler+0x90/0xb8
 el0_sync+0x158/0x180
...

Fixes: a0aab9e1404a ("ASoC: codecs: add wsa881x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210201161429.28060-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cpcap: fix microphone timeslot mask

[ Upstream commit de5bfae2fd962a9da99f56382305ec7966a604b9 ]

The correct mask is 0x1f8 (Bit 3-8), but due to missing BIT() 0xf (Bit
0-3) was set instead. This means setting of CPCAP_BIT_MIC1_RX_TIMESLOT0
(Bit 3) still worked (part of both masks). On the other hand the code
does not properly clear the other MIC timeslot bits. I think this
is not a problem, since they are probably initialized to 0 and not
touched by the driver anywhere else. But the mask also contains some
wrong bits, that will be cleared. Bit 0 (CPCAP_BIT_SMB_CDC) should be
safe, since the driver enforces it to be 0 anyways.

Bit 1-2 are CPCAP_BIT_FS_INV and CPCAP_BIT_CLK_INV. This means enabling
audio recording forces the codec into SND_SOC_DAIFMT_NB_NF mode, which
is obviously bad.

The bug probably remained undetected, because there are not many use
cases for routing microphone to the CPU on platforms using cpcap and
user base is small. I do remember having some issues with bad sound
quality when testing voice recording back when I wrote the driver.
It probably was this bug.

Fixes: f6cdf2d3445d ("ASoC: cpcap: new codec")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210123172945.3958622-1-sre@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ata: ahci_brcm: Add back regulators management

[ Upstream commit 10340f8d7b6dd54e616339c8ccb2f397133ebea0 ]

While reworking the resources management and departing from using
ahci_platform_enable_resources() which did not allow a proper step
separation like we need, we unfortunately lost the ability to control
AHCI regulators. This broke some Broadcom STB systems that do expect
regulators to be turned on to link up with attached hard drives.

Fixes: c0cdf2ac4b5b ("ata: ahci_brcm: Fix AHCI resources management")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm: proc: Invalidate TLB after clearing soft-dirty page state

[ Upstream commit 912efa17e5121693dfbadae29768f4144a3f9e62 ]

Since commit 0758cd830494 ("asm-generic/tlb: avoid potential double
flush"), TLB invalidation is elided in tlb_finish_mmu() if no entries
were batched via the tlb_remove_*() functions. Consequently, the
page-table modifications performed by clear_refs_write() in response to
a write to /proc/<pid>/clear_refs do not perform TLB invalidation.
Although this is fine when simply aging the ptes, in the case of
clearing the "soft-dirty" state we can end up with entries where
pte_write() is false, yet a writable mapping remains in the TLB.

Fix this by avoiding the mmu_gather API altogether: managing both the
'tlb_flush_pending' flag on the 'mm_struct' and explicit TLB
invalidation for the sort-dirty path, much like mprotect() does already.

Fixes: 0758cd830494 ("asm-generic/tlb: avoid potential double flush”)
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Yu Zhao <yuzhao@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20210127235347.1402-2-will@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau: bail out of nouveau_channel_new if channel init fails

[ Upstream commit eaba3b28401f50e22d64351caa8afe8d29509f27 ]

Unprivileged user can crash kernel by using DRM_IOCTL_NOUVEAU_CHANNEL_ALLOC
ioctl. This was reported by trinity[1] fuzzer.

[   71.073906] nouveau 0000:01:00.0: crashme[1329]: channel failed to initialise, -17
[   71.081730] BUG: kernel NULL pointer dereference, address: 00000000000000a0
[   71.088928] #PF: supervisor read access in kernel mode
[   71.094059] #PF: error_code(0x0000) - not-present page
[   71.099189] PGD 119590067 P4D 119590067 PUD 1054f5067 PMD 0
[   71.104842] Oops: 0000 [#1] SMP NOPTI
[   71.108498] CPU: 2 PID: 1329 Comm: crashme Not tainted 5.8.0-rc6+ #2
[   71.114993] Hardware name: AMD Pike/Pike, BIOS RPK1506A 09/03/2014
[   71.121213] RIP: 0010:nouveau_abi16_ioctl_channel_alloc+0x108/0x380 [nouveau]
[   71.128339] Code: 48 89 9d f0 00 00 00 41 8b 4c 24 04 41 8b 14 24 45 31 c0 4c 8d 4b 10 48 89 ee 4c 89 f7 e8 10 11 00 00 85 c0 75 78 48 8b 43 10 <8b> 90 a0 00 00 00 41 89 54 24 08 80 7d 3d 05 0f 86 bb 01 00 00 41
[   71.147074] RSP: 0018:ffffb4a1809cfd38 EFLAGS: 00010246
[   71.152526] RAX: 0000000000000000 RBX: ffff98cedbaa1d20 RCX: 00000000000003bf
[   71.159651] RDX: 00000000000003be RSI: 0000000000000000 RDI: 0000000000030160
[   71.166774] RBP: ffff98cee776de00 R08: ffffdc0144198a08 R09: ffff98ceeefd4000
[   71.173901] R10: ffff98cee7e81780 R11: 0000000000000001 R12: ffffb4a1809cfe08
[   71.181214] R13: ffff98cee776d000 R14: ffff98cec519e000 R15: ffff98cee776def0
[   71.188339] FS:  00007fd926250500(0000) GS:ffff98ceeac80000(0000) knlGS:0000000000000000
[   71.196418] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   71.202155] CR2: 00000000000000a0 CR3: 0000000106622000 CR4: 00000000000406e0
[   71.209297] Call Trace:
[   71.211777]  ? nouveau_abi16_ioctl_getparam+0x1f0/0x1f0 [nouveau]
[   71.218053]  drm_ioctl_kernel+0xac/0xf0 [drm]
[   71.222421]  drm_ioctl+0x211/0x3c0 [drm]
[   71.226379]  ? nouveau_abi16_ioctl_getparam+0x1f0/0x1f0 [nouveau]
[   71.232500]  nouveau_drm_ioctl+0x57/0xb0 [nouveau]
[   71.237285]  ksys_ioctl+0x86/0xc0
[   71.240595]  __x64_sys_ioctl+0x16/0x20
[   71.244340]  do_syscall_64+0x4c/0x90
[   71.248110]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   71.253162] RIP: 0033:0x7fd925d4b88b
[   71.256731] Code: Bad RIP value.
[   71.259955] RSP: 002b:00007ffc743592d8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
[   71.267514] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fd925d4b88b
[   71.274637] RDX: 0000000000601080 RSI: 00000000c0586442 RDI: 0000000000000003
[   71.281986] RBP: 00007ffc74359340 R08: 00007fd926016ce0 R09: 00007fd926016ce0
[   71.289111] R10: 0000000000000003 R11: 0000000000000206 R12: 0000000000400620
[   71.296235] R13: 00007ffc74359420 R14: 0000000000000000 R15: 0000000000000000
[   71.303361] Modules linked in: rfkill sunrpc snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core edac_mce_amd snd_hwdep kvm_amd snd_seq ccp snd_seq_device snd_pcm kvm snd_timer snd irqbypass soundcore sp5100_tco pcspkr crct10dif_pclmul crc32_pclmul ghash_clmulni_intel wmi_bmof joydev i2c_piix4 fam15h_power k10temp acpi_cpufreq ip_tables xfs libcrc32c sd_mod t10_pi sg nouveau video mxm_wmi i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm broadcom bcm_phy_lib ata_generic ahci drm e1000 crc32c_intel libahci serio_raw tg3 libata firewire_ohci firewire_core wmi crc_itu_t dm_mirror dm_region_hash dm_log dm_mod
[   71.365269] CR2: 00000000000000a0

simplified reproducer
---------------------------------8<----------------------------------------
/*
 * gcc -o crashme crashme.c
 * ./crashme /dev/dri/renderD128
 */

struct drm_nouveau_channel_alloc {
uint32_t     fb_ctxdma_handle;
uint32_t     tt_ctxdma_handle;

int          channel;
uint32_t     pushbuf_domains;

/* Notifier memory */
uint32_t     notifier_handle;

/* DRM-enforced subchannel assignments */
struct {
uint32_t handle;
uint32_t grclass;
} subchan[8];
uint32_t nr_subchan;
};

static struct drm_nouveau_channel_alloc channel;

int main(int argc, char *argv[]) {
int fd;
int rv;

if (argc != 2)
die("usage: %s <dev>", 0, argv[0]);

if ((fd = open(argv[1], O_RDONLY)) == -1)
die("open %s", errno, argv[1]);

if (ioctl(fd, DRM_IOCTL_NOUVEAU_CHANNEL_ALLOC, &channel) == -1 &&
errno == EACCES)
die("ioctl %s", errno, argv[1]);

close(fd);

printf("PASS\n");

return 0;
}
---------------------------------8<----------------------------------------

[1] https://github.com/kernelslacker/trinity

Fixes: eeaf06ac1a55 ("drm/nouveau/svm: initial support for shared virtual memory")
Signed-off-by: Frantisek Hrbata <frantisek@hrbata.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: talitos - Fix ctr(aes) on SEC1

[ Upstream commit 43a942d27eaaf33bca560121cbe42f3637e92880 ]

While ctr(aes) requires the use of a special descriptor on SEC2 (see
commit 70d355ccea89 ("crypto: talitos - fix ctr-aes-talitos")), that
special descriptor doesn't work on SEC1, see commit e738c5f15562
("powerpc/8xx: Add DT node for using the SEC engine of the MPC885").

However, the common nonsnoop descriptor works properly on SEC1 for
ctr(aes).

Add a second template for ctr(aes) that will be registered
only on SEC1.

Fixes: 70d355ccea89 ("crypto: talitos - fix ctr-aes-talitos")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: talitos - Work around SEC6 ERRATA (AES-CTR mode data size error)

[ Upstream commit 416b846757bcea20006a9197e67ba3a8b5b2a680 ]

Talitos Security Engine AESU considers any input
data size that is not a multiple of 16 bytes to be an error.
This is not a problem in general, except for Counter mode
that is a stream cipher and can have an input of any size.

Test Manager for ctr(aes) fails on 4th test vector which has
a length of 499 while all previous vectors which have a 16 bytes
multiple length succeed.

As suggested by Freescale, round up the input data length to the
nearest 16 bytes.

Fixes: 5e75ae1b3cef ("crypto: talitos - add new crypto modes")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: parser: imagetag: fix error codes in bcm963xx_parse_imagetag_partitions()

[ Upstream commit 12ba8f8ce29fdd277f3100052eddc1afd2f5ea3f ]

If the kstrtouint() calls fail, then this should return a negative
error code but it currently returns success.

Fixes: dd84cb022b31 ("mtd: bcm63xxpart: move imagetag parsing to its own parser")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/YBKFtNaFHGYBj+u4@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/arm-cmn: Move IRQs when migrating context

[ Upstream commit 1c8147ea89c883d1f4e20f1b1d9c879291430102 ]

If we migrate the PMU context to another CPU, we need to remember to
retarget the IRQs as well.

Fixes: 0ba64770a2f2 ("perf: Add Arm CMN-600 PMU driver")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/e080640aea4ed8dfa870b8549dfb31221803eb6b.1611839564.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/arm-cmn: Fix PMU instance naming

[ Upstream commit 79d7c3dca99fa96033695ddf5d495b775a3a137b ]

Although it's neat to avoid the suffix for the typical case of a
single PMU, it means systems with multiple CMN instances end up with
inconsistent naming. I think it also breaks perf tool's "uncore alias"
logic if the common instance prefix is also the full name of one.

Avoid any surprises by not trying to be clever and simply numbering
every instance, even when it might technically prove redundant.

Fixes: 0ba64770a2f2 ("perf: Add Arm CMN-600 PMU driver")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/649a2281233f193d59240b13ed91b57337c77b32.1611839564.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: hda: cancel D0i3 work during runtime suspend

[ Upstream commit 0084364d9678e9d722ee620ed916f2f9954abdbf ]

Cancel the D0i3 work during runtime suspend as no streams are
active at this point anyway.

Fixes: 63e51fd33fef ("ASoC: SOF: Intel: cnl: Implement feature to support DSP D0i3 in S0")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210128092345.1033085-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: lpass-cpu: Remove bit clock state check

[ Upstream commit 6c28377b7114d04cf82eedffe9dcc8fa66ecec48 ]

No need of BCLK state maintenance from driver side as
clock_enable and clk_disable API's maintaing state counter.

One of the major issue was spotted when Headset jack inserted
while playback continues, due to same PCM device node opens twice
for playaback/capture and closes once for capture and playback continues.

It can resolve the errors in such scenarios.

Fixes: b1824968221c ("ASoC: qcom: Fix enabling BCLK and LRCLK in LPAIF invalid state")

Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210127151824.8929-1-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: compress: fix potential deadlock

[ Upstream commit 3afae09ffea5e08f523823be99a784675995d6bb ]

generic/269 reports a hangtask issue, the root cause is ABBA deadlock
described as below:

Thread A Thread B
- down_write(&sbi->gc_lock) -- A
- f2fs_write_data_pages
 - lock all pages in cluster -- B
 - f2fs_write_multi_pages
  - f2fs_write_raw_pages
   - f2fs_write_single_data_page
    - f2fs_balance_fs
     - down_write(&sbi->gc_lock) -- A
- f2fs_gc
 - do_garbage_collect
  - ra_data_block
   - pagecache_get_page -- B

To fix this, it needs to avoid calling f2fs_balance_fs() if there is
still cluster pages been locked in context of cluster writeback, so
instead, let's call f2fs_balance_fs() in the end of
f2fs_write_raw_pages() when all cluster pages were unlocked.

Fixes: 4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/eas: Don't update misfit status if the task is pinned

[ Upstream commit 0ae78eec8aa64e645866e75005162603a77a0f49 ]

If the task is pinned to a cpu, setting the misfit status means that
we'll unnecessarily continuously attempt to migrate the task but fail.

This continuous failure will cause the balance_interval to increase to
a high value, and eventually cause unnecessary significant delays in
balancing the system when real imbalance happens.

Caught while testing uclamp where rt-app calibration loop was pinned to
cpu 0, shortly after which we spawn another task with high util_clamp
value. The task was failing to migrate after over 40ms of runtime due to
balance_interval unnecessary expanded to a very high value from the
calibration loop.

Not done here, but it could be useful to extend the check for pinning to
verify that the affinity of the task has a cpu that fits. We could end
up in a similar situation otherwise.

Fixes: 3b1baa6496e6 ("sched/fair: Add 'group_misfit_task' load-balance type")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Acked-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210119120755.2425264-1-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: uvcvideo: Accept invalid bFormatIndex and bFrameIndex values

[ Upstream commit dc9455ffae02d7b7fb51ba1e007fffcb9dc5d890 ]

The Renkforce RF AC4K 300 Action Cam 4K reports invalid bFormatIndex and
bFrameIndex values when negotiating the video probe and commit controls.
The UVC descriptors report a single supported format and frame size,
with bFormatIndex and bFrameIndex both equal to 2, but the video probe
and commit controls report bFormatIndex and bFrameIndex set to 1.

The device otherwise operates correctly, but the driver rejects the
values and fails the format try operation. Fix it by ignoring the
invalid indices, and assuming that the format and frame requested by the
driver are accepted by the device.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=210767
Fixes: 8a652a17e3c0 ("media: uvcvideo: Ensure all probed info is returned to v4l2")
Reported-by: Till Dörges <doerges@pre-sense.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: pxa_camera: declare variable when DEBUG is defined

[ Upstream commit 031b9212eeee365443aaef013360ea6cded7b2c4 ]

When DEBUG is defined this error occurs

drivers/media/platform/pxa_camera.c:1410:7: error:
  ‘i’ undeclared (first use in this function)
  for (i = 0; i < vb->num_planes; i++)
       ^
The variable 'i' is missing, so declare it.

Fixes: 6f28435d1c15 ("[media] media: platform: pxa_camera: trivial move of functions")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mtk-vcodec: fix argument used when DEBUG is defined

[ Upstream commit a04e187d231086a1313fd635ac42bdbc997137ad ]

When DEBUG is defined this error occurs

drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c:306:41:
  error: ‘i’ undeclared (first use in this function)
  mtk_v4l2_debug(2, "reg[%d] base=0x%p", i, dev->reg_base[VENC_SYS]);

Reviewing the old line

mtk_v4l2_debug(2, "reg[%d] base=0x%p", i, dev->reg_base[i]);

All the i's need to be changed to VENC_SYS.
Fix a similar error for VENC_LT_SYS.

Fixes: 0dc4b3286125 ("media: mtk-vcodec: venc: support SCP firmware")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cx25821: Fix a bug when reallocating some dma memory

[ Upstream commit b2de3643c5024fc4fd128ba7767c7fb8b714bea7 ]

This function looks like a realloc.

However, if 'risc->cpu != NULL', the memory will be freed, but never
reallocated with the bigger 'size'.
Explicitly set 'risc->cpu' to NULL, so that the reallocation is
correctly performed a few lines below.

[hverkuil: NULL != risc->cpu -> risc->cpu]

Fixes: 5ede94c70553 ("[media] cx25821: remove bogus btcx_risc dependency)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: qm1d1c0042: fix error return code in qm1d1c0042_init()

[ Upstream commit fcf8d018bdca0453b8d6359062e6bc1512d04c38 ]

Fix to return a negative error code from the error handling case
instead of 0 in function qm1d1c0042_init(), as done elsewhere
in this function.

Fixes: ab4d14528fdf ("[media] em28xx: add support for PLEX PX-BCUD (ISDB-S)")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Acked-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: atomisp: Fix a buffer overflow in debug code

[ Upstream commit 625993166b551d633917ca35d4afb7b46d7451b4 ]

The "pad" variable is a user controlled string and we haven't properly
clamped it at this point so the debug code could print from beyond the
of the array.

Fixes: a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vidtv: psi: fix missing crc for PMT

[ Upstream commit 0a933a7f73d6c545dcbecb4f7a92d272aef4417b ]

The PMT write function was refactored and this broke the CRC computation.

Fix it.

Fixes: db9569f67e2e ("media: vidtv: cleanup PMT write table function")
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: lmedm04: Fix misuse of comma

[ Upstream commit 59a3e78f8cc33901fe39035c1ab681374bba95ad ]

There's a comma used instead of a semicolon that causes multiple
statements to be executed after an if instead of just the intended
single statement.

Replace the comma with a semicolon.

Fixes: 15e1ce33182d ("[media] lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in interrupt urb")
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: software_node: Fix refcounts in software_node_get_next_child()

[ Upstream commit fb5ec981adf08b94e6ce27ca16b7765c94f4513c ]

The software_node_get_next_child() function currently does not hold
references to the child software_node that it finds or put the ref that
is held against the old child - fix that.

Fixes: 59abd83672f7 ("drivers: base: Introducing software nodes to the firmware node framework")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fix HDMI deep color output for DCE 6-11.

[ Upstream commit efa18405baa55a864c61d2f3cc6fe4d363818eb3 ]

This fixes corrupted display output in HDMI deep color
10/12 bpc mode at least as observed on AMD Mullins, DCE-8.3.

It will hopefully also provide fixes for other DCE's up to
DCE-11, assuming those will need similar fixes, but i could
not test that for HDMI due to lack of suitable hw, so viewer
discretion is advised.

dce110_stream_encoder_hdmi_set_stream_attribute() is used for
HDMI setup on all DCE's and is missing color_depth assignment.

dce110_program_pix_clk() is used for pixel clock setup on HDMI
for DCE 6-11, and is missing color_depth assignment.

Additionally some of the underlying Atombios specific encoder
and pixelclock setup functions are missing code which is in
the classic amdgpu kms modesetting path and the in the radeon
kms driver for DCE6/DCE8.

encoder_control_digx_v3() - Was missing setup code wrt. amdgpu
and radeon kms classic drivers. Added here, but untested due to
lack of suitable test hw.

encoder_control_digx_v4() - Added missing setup code.
Successfully tested on AMD mullins / DCE-8.3 with HDMI deep color
output at 10 bpc and 12 bpc.

Note that encoder_control_digx_v5() has proper setup code in place
and is used, e.g., by DCE-11.2, but this code wasn't used for deep
color setup due to the missing cntl.color_depth setup in the calling
function for HDMI.

set_pixel_clock_v5() - Missing setup code wrt. classic amdgpu/radeon
kms. Added here, but untested due to lack of hw.

set_pixel_clock_v6() - Missing setup code added. Successfully tested
on AMD mullins DCE-8.3. This fixes corrupted display output at HDMI
deep color output with 10 bpc or 12 bpc.

Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)")

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fix 10/12 bpc setup in DCE output bit depth reduction.

[ Upstream commit 1916866dfa4aaceba1a70db83fde569387649d93 ]

In set_clamp(), the comments and definitions for the COLOR_DEPTH_101010
and COLOR_DEPTH_121212 cases directly contradict the code comment which
explains how this should work, whereas the COLOR_DEPTH_888 case
is consistent with the code comments. Comment says the bitmask should
be chosen to align to the top-most 10 or 12 MSB's on a 14 bit bus, but
the implementation contradicts that: 10 bit case sets a mask for 12 bpc
clamping, whereas 12 bit case sets a mask for 14 bpc clamping.

Note that during my limited testing on DCE-8.3 (HDMI deep color)
and DCE-11.2 (DP deep color), this didn't have any obvious ill
effects, neither did fixing it change anything obvious for the
better, so this fix may be inconsequential on DCE, and just
reduce the confusion of innocent bystanders when reading the code
and trying to investigate problems with 10 bpc+ output.

Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)")

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

macintosh/adb-iop: Use big-endian autopoll mask

[ Upstream commit c396dd2ec5bbd1cb80eafe32a72ab6bd6b17cb5a ]

As usual, the available documentation is inadequate and leaves endianness
unspecified for message data. However, testing shows that this patch does
improve correctness. The mistake should have been detected earlier but it
was obscured by other bugs. In testing, this patch reinstated pre-v5.9
behaviour. The old driver bugs remain and ADB input devices may stop
working. But that appears to be unrelated.

Cc: Joshua Thompson <funaho@jurai.org>
Fixes: c66da95a39ec ("macintosh/adb-iop: Implement SRQ autopolling")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20210125074524.3027452-1-geert@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

bsg: free the request before return error code

[ Upstream commit 0f7b4bc6bb1e57c48ef14f1818df947c1612b206 ]

Free the request rq before returning error code.

Fixes: 972248e9111e ("scsi: bsg-lib: handle bidi requests without block layer help")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: toggle on DF Cstate after finishing xgmi injection

[ Upstream commit fe2d9f5abf19f2b3688b3b8da4e42f8d07886847 ]

Fixes: 5c23e9e05e42 ("drm/amdgpu: Update RAS XGMI error inject sequence")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/tegra: Fix reference leak when pm_runtime_get_sync() fails

[ Upstream commit dcdfe2712b68f1e9dbf4f1a96ad59b80e5cc0ef7 ]

The PM reference count is not expected to be incremented on return in
these Tegra functions.

However, pm_runtime_get_sync() will increment the PM reference count
even on failure. Forgetting to put the reference again will result in
a leak.

Replace it with pm_runtime_resume_and_get() to keep the usage counter
balanced.

Fixes: fd67e9c6ed5a ("drm/tegra: Do not implement runtime PM")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: Compare __SYNC_loongson3_war against 0

[ Upstream commit 8790ccf8daf1a8c53b6cb8ce0c9a109274bd3fa8 ]

When building with clang when CONFIG_CPU_LOONGSON3_WORKAROUNDS is
enabled:

 In file included from lib/errseq.c:4:
 In file included from ./include/linux/atomic.h:7:
 ./arch/mips/include/asm/atomic.h:52:1: warning: converting the result of
 '<<' to a boolean always evaluates to true
 [-Wtautological-constant-compare]
 ATOMIC_OPS(atomic64, s64)
 ^
 ./arch/mips/include/asm/atomic.h:40:9: note: expanded from macro
 'ATOMIC_OPS'
         return cmpxchg(&v->counter, o, n);
                ^
 ./arch/mips/include/asm/cmpxchg.h:194:7: note: expanded from macro
 'cmpxchg'
         if (!__SYNC_loongson3_war)
              ^
 ./arch/mips/include/asm/sync.h:147:34: note: expanded from macro
 '__SYNC_loongson3_war'
 # define __SYNC_loongson3_war   (1 << 31)
                                    ^

While it is not wrong that the result of this shift is always true in a
boolean context, it is not a problem here. Regardless, the warning is
really noisy so rather than making the shift a boolean implicitly, use
it in an equality comparison so the shift is used as an integer value.

Fixes: 4d1dbfe6cbec ("MIPS: atomic: Emit Loongson3 sync workarounds within asm")
Fixes: a91f2a1dba44 ("MIPS: cmpxchg: Omit redundant barriers for Loongson3")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: properly stop .eh_frame generation

[ Upstream commit 894ef530012fb5078466efdfb2c15d8b2f1565cd ]

Commit 866b6a89c6d1 ("MIPS: Add DWARF unwinding to assembly") added
-fno-asynchronous-unwind-tables to KBUILD_CFLAGS to prevent compiler
from emitting .eh_frame symbols.
However, as MIPS heavily uses CFI, that's not enough. Use the
approach taken for x86 (as it also uses CFI) and explicitly put CFI
symbols into the .debug_frame section (except for VDSO).
This allows us to drop .eh_frame from DISCARDS as it's no longer
being generated.

Fixes: 866b6a89c6d1 ("MIPS: Add DWARF unwinding to assembly")
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ti-vpe: cal: fix write to unallocated memory

[ Upstream commit 5a402af5e19f215689e8bf3cc244c21d94eba3c4 ]

The asd allocated with v4l2_async_notifier_add_fwnode_subdev() must be
of size cal_v4l2_async_subdev, otherwise access to
cal_v4l2_async_subdev->phy will go to unallocated memory.

Fixes: 8fcb7576ad19 ("media: ti-vpe: cal: Allow multiple contexts per subdev notifier")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: imx7: csi: Fix pad link validation

[ Upstream commit f5ffb81f51376eb5a12e8c4cb4871426c65bb2af ]

We can not make the assumption that the bound subdev is always a CSI
mux, in i.MX6UL/i.MX6ULL that is not the case. So, just get the entity
selected by source directly upstream from the CSI.

Fixes: 86e02d07871c ("media: imx5/6/7: csi: Mark a bound video mux as a CSI mux")
Reported-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: imx7: csi: Fix regression for parallel cameras on i.MX6UL

[ Upstream commit 9bac67214fbf4b5f23463f7742ccf69bfe684cbd ]

Commit 86e02d07871c ("media: imx5/6/7: csi: Mark a bound video mux as
a CSI mux") made an incorrect assumption that for imx7-media-csi,
the bound subdev must always be a CSI mux. On i.MX6UL/i.MX6ULL there
is no CSI mux at all, so do not return an error when the entity is not a
video mux and assign the IMX_MEDIA_GRP_ID_CSI_MUX group id only when
appropriate.

This is the same approach as done in imx-media-csi.c and it fixes the
csi probe regression on i.MX6UL.

Tested on a imx6ull-evk board.

Fixes: 86e02d07871c ("media: imx5/6/7: csi: Mark a bound video mux as a CSI mux")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/sun4i: tcon: fix inverted DCLK polarity

[ Upstream commit 67f4aeb2b41a0629abde3794d463547f60b0cbdd ]

During commit 88bc4178568b ("drm: Use new
DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags") DRM_BUS_FLAG_*
macros have been changed to avoid ambiguity but just because of this
ambiguity previous DRM_BUS_FLAG_PIXDATA_(POS/NEG)EDGE were used meaning
_SAMPLE_ not _DRIVE_. This leads to DLCK inversion and need to fix but
instead of swapping phase values, let's adopt an easier approach Maxime
suggested:
It turned out that bit 26 of SUN4I_TCON0_IO_POL_REG is dedicated to
invert DCLK polarity and this makes things really easier than before. So
let's handle DCLK polarity by adding SUN4I_TCON0_IO_POL_DCLK_DRIVE_NEGEDGE
as bit 26 and activating according to bus_flags the same way it is done
for all the other signals polarity.

Fixes: 88bc4178568b ("drm: Use new DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags")
Suggested-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114081732.9386-1-giulio.benetti@benettiengineering.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/fair: Avoid stale CPU util_est value for schedutil in task dequeue

[ Upstream commit 8c1f560c1ea3f19e22ba356f62680d9d449c9ec2 ]

CPU (root cfs_rq) estimated utilization (util_est) is currently used in
dequeue_task_fair() to drive frequency selection before it is updated.

with:

CPU_util        : rq->cfs.avg.util_avg
CPU_util_est    : rq->cfs.avg.util_est
CPU_utilization : max(CPU_util, CPU_util_est)
task_util       : p->se.avg.util_avg
task_util_est   : p->se.avg.util_est

dequeue_task_fair():

    /* (1) CPU_util and task_util update + inform schedutil about
           CPU_utilization changes */
    for_each_sched_entity() /* 2 loops */
        (dequeue_entity() ->) update_load_avg() -> cfs_rq_util_change()
         -> cpufreq_update_util() ->...-> sugov_update_[shared\|single]
         -> sugov_get_util() -> cpu_util_cfs()

    /* (2) CPU_util_est and task_util_est update */
    util_est_dequeue()

cpu_util_cfs() uses CPU_utilization which could lead to a false (too
high) utilization value for schedutil in task ramp-down or ramp-up
scenarios during task dequeue.

To mitigate the issue split the util_est update (2) into:

 (A) CPU_util_est update in util_est_dequeue()
 (B) task_util_est update in util_est_update()

Place (A) before (1) and keep (B) where (2) is. The latter is necessary
since (B) relies on task_util update in (1).

Fixes: 7f65ea42eb00 ("sched/fair: Add util_est on top of PELT")
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/1608283672-18240-1-git-send-email-xuewen.yan94@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: bcm - Rename struct device_private to bcm_device_private

[ Upstream commit f7f2b43eaf6b4cfe54c75100709be31d5c4b52c8 ]

Renaming 'struct device_private' to 'struct bcm_device_private',
because it clashes with 'struct device_private' from
'drivers/base/base.h'.

While it's not a functional problem, it's causing two distinct
type hierarchies in BTF data. It also breaks build with options:
  CONFIG_DEBUG_INFO_BTF=y
  CONFIG_CRYPTO_DEV_BCM_SPU=y

as reported by Qais Yousef [1].

[1] https://lore.kernel.org/lkml/20201229151352.6hzmjvu3qh6p2qgg@e107158-lin/

Fixes: 9d12ba86f818 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

evm: Fix memleak in init_desc

[ Upstream commit ccf11dbaa07b328fa469415c362d33459c140a37 ]

tmp_tfm is allocated, but not freed on subsequent kmalloc failure, which
leads to a memory leak.  Free tmp_tfm.

Fixes: d46eb3699502b ("evm: crypto hash replaced by shash")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
[zohar@linux.ibm.com: formatted/reworded patch description]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: qdsp6: Move frontend AIFs to q6asm-dai

[ Upstream commit 6fd8d2d275f74baa7ac17b2656da1235f56dab99 ]

At the moment it is necessary to set up the DAPM routes between
front-end AIF<->DAI explicitly in the device tree, e.g. using

audio-routing =
"MM_DL1", "MultiMedia1 Playback",
"MM_DL3", "MultiMedia3 Playback",
"MM_DL4", "MultiMedia4 Playback",
"MultiMedia2 Capture", "MM_UL2";

This is prone to mistakes and (sadly) there is no clear error if one
of these routes is missing. :(

Actually, this should not be necessary because the ASoC core normally
automatically links AIF<->DAI within snd_soc_dapm_link_dai_widgets().
This is done using the "stname" parameter of SND_SOC_DAPM_AIF_IN/OUT.

For SND_SOC_DAPM_AIF_IN("MM_DL1", "MultiMedia1 Playback", 0, 0, 0, 0),
it should create the route from above: MM_DL1 <-> MultiMedia1 Playback.

This does not work at the moment because the AIF widget (MM_DL1)
and the DAI widget (MultiMedia1 Playback) belong to different
DAPM contexts (q6routing / q6asm-dai).

Fix this by declaring the AIF widgets in the same driver as the DAIs
(q6asm-dai). Now the routes above are created automatically
and no longer need to be specified in the device tree.

This is also more consistent with the back-end AIFs which are already
declared in q6afe-dais instead of q6routing. q6routing should only link
the components together using mixers.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 2a9e92d371db ("ASoC: qdsp6: q6asm: Add q6asm dai driver")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20201211203255.148246-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs42l56: fix up error handling in probe

[ Upstream commit 856fe64da84c95a1d415564b981ae3908eea2a76 ]

There are two issues with this code.  The first error path forgot to set
the error code and instead returns success.  The second error path
doesn't clean up.

Fixes: 272b5edd3b8f ("ASoC: Add support for CS42L56 CODEC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X9NE/9nK9/TuxuL+@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: aspeed: fix error return code in aspeed_video_setup_video()

[ Upstream commit d497fcdab02996a4510d5dd0d743447c737c317a ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>