tools/hcitool: Fix the descriptions of leal* commands

The descriptions of leal* commands are copied from lewl* commands.
However they should use "accept list" instead.

Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

emulator: Add initial support for MSFT vendor commands

This adds the initial support for MSFT vendor commands and enable them
when in btvirt:

< HCI Command: Microsoft Ex.. (0x3f|0x001e) plen 1
      Read Supported Features (0x00)
> HCI Event: Command Complete (0x0e) plen 14
      Microsoft Extension (0x3f|0x001e) ncmd 1
      Read Supported Features (0x00)
        Status: Success (0x00)
        Features: 0x3f 0x00 0x00 0x00 0x00 0x00 0x00 0x00
          RSSI Monitoring feature for BR/EDR
          RSSI Monitoring feature for LE connections
          RSSI Monitoring of LE advertisements
          Advertising Monitoring of LE advertisements
          Verifying the validity of P-192 and P-256 keys
          Continuous Advertising Monitoring
        Event prefix length: 0
        Event prefix:
< HCI Command: Microsoft Ex.. (0x3f|0x001e) plen 2
      LE Set Advertisement Filter Enable (0x05)
        Enable: All filter conditions (0x01)
> HCI Event: Command Complete (0x0e) plen 5
      Microsoft Extension (0x3f|0x001e) ncmd 1
      LE Set Advertisement Filter Enable (0x05)
        Status: Success (0x00)

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

monitor: Enable decoding of MSFT extension with emulator

This enables decoding MSFT extension with emulator instances since it
shall be the only one using Linux Foundation as manufacturer.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

btdev: Use Linux Foundation as manufacturer

This makes the emulator use Linux Foundation manufacturer id which
shall be simpler to distinguish emulator instances since it is unlikely
there will be other vendors using it.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

emulator/vhci: Fix writing msft_opcode using binary format

debugfs expects values in string format not binary format.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

monitor/msft: Add feature bits definition

This adds the feature bits definition used in
HCI_VS_MSFT_Read_Supported_Features.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

monitor/msft: Fix uuid.u128 format

128 bits are actually 16 octecs not 8.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

peripheral: Fix unchecked return value

This patch fixes the unchecked return value(CWE-252) issues reported by
the Coverity.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

obexd: Fix unchecked return value

This patch fixes the unchecked return value(CWE-252) issues reported by
the Coverity.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

mesh: Fix unchecked return value

This patch fixes the unchecked return value(CWE-252) issues reported by
the Coverity.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

profiles/input: Fix unchecked return value

This patch fixes the unchecked return value(CWE-252) issues reported by
the Coverity.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

profiles/a2dp: Fix unchecked return value

This patch fixes the unchecked return value(CWE-252) issues reported by
the Coverity.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

plugins/admin: Fix unchecked return value

This patch fixes the unchecked return value(CWE-252) issues reported by
the Coverity.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

attrib-server: Fix unchecked return value

This patch fixes the unchecked return value(CWE-252) issues reported by
the Coverity.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

adapter: Fix unchecked return value

This patch fixes the unchecked return value(CWE-252) issues reported by
the Coverity.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

device: Fix unchecked return value

This patch fixes the unchecked return value(CWE-252) issues reported by
the Coverity.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

mgmt-tester: Make use of vhci_set_force_suspend/vhci_set_force_wakeup

This replaces the direct setting debugfs to use vhci instance which
properly stores the controller index so it can be used even if there
are real controllers in the system.

Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

vhci: Add functions to interface with debugfs

This adds functions that can be used to set debugfs options.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

hciemu: Use vhci_open to instanciate a vhci btdev

This makes use of vhci_open to isntanciate the vhci btdev since that
has proper support for reading the index assigned to it.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

vhci: Use io.h instead of mainloop.h

The likes of mainloop_add_fd is not implemented in mainloop-glib.c while
io_set_read_handler so this makes it possible to use vhci instance with
both libshared-glib and libshared-mainloop.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

vhci: Read the controller index

This makes vhci instance read its controller index assigned by the
kernel and also introduces vhci_get_btdev so it can be used by the
likes of hciemu.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

monitor: Make use of MSFT packet definitions

This make use of the packet definitions for MSFT extension.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

monitor: Add packet definitions for MSFT extension

This adds proper packet definitions for command and response of MSFT
extension.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

Release 5.62

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

build: Update library version

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

Use accurate icons for headphones and headsets

While these icon names are not part of the spec standard names [0] they
are in practice implemented by at least Adwaita, Gnome, Oxygen, Arc and Breeze
themes.

[0] https://specifications.freedesktop.org/icon-naming-spec/latest/ar01s04.html

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mesh-cfg-client: Fix NULL pointer dereferencing

This patch fixes a number of potential NULL pointer dereferencing
cases.

Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mgmt-tester: Add more suspend/resume test cases

This patch adds more suspend/resuem test cases like
 - Discover -> Suspend
 - Discover -> Suspend -> Resume
 - Suspend -> Resume -> Suspend -> Resume

Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mgmt-tester: Updates Experimental Feature test cases

This patch updates/adds test cases for Read and Set Experimental Feature
commands.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

doc/tester-config: Enable Runtime Debugging Feature

This patch adds CONFIG_BT_FEATURE_DEBUG=y in tester config to enable the
runtime debug option.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

test-hog: Update pdu sequence

With recent changes to use bt_att_resend the procedures such as read
long will group the reads to the same handler before proceeding to the
next procedures.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

attrib: Make use of bt_att_resend

If the id != 0 that means that a proceedure that needs multiple PDUs is
in progress so use bt_att_resend with its id that way the bt_att id and
gattrib shall always be the same.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

shared/gatt-client: Make use of bt_att_resend

This makes use of bt_att_resend when sending continuation of PDUs such
as BT_ATT_OP_READ_BLOB_REQ and BT_ATT_OP_PREP_WRITE_REQ to avoid having
it interleave with other procedures, which is both simpler for the
peripheral to handle as well as it should reduce the lifetime of the
objects used for tracking the state of these procedures.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

shared/att: Add bt_att_resend

This adds bt_att_resend which can be used with procedures that needs to
send multiple PDUs to complete (e.g. Read Long, Write Long, etc.) so
they are pushed to the head instead of the tail of the queue so one can
retain its position on the queue.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mgmt-tester: Update the correct suspend reason for disconnect

This patch fixes the suspend reason for the pairing test cases to the
disconnect.

Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mgmt-tester: Fix the suspend reason code

This patch fixes the suspend reason code to align with the corrent
kernel implementation.

Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mgmt-tester: Add test cases for load_long_term_keys command

This patch adds extra test cases for load_long_term_keys command.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

client: Print error code for connect methods

The following steps were performed.
- Issuing repeated commands to connect the same BLE device.
- Verifying the print in bluetoothctl console

Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Howard Chung <howardchung@google.com>
Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

device: Include detailed error string in Connect() return

This replaces generic strerror message with context detailed error
string to better indicate the detailed failure reason so that the D-Bus
clients can optimize their application to work better with BlueZ, e.g.
introducing retry mechanism or building metrics.

Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Howard Chung <howardchung@google.com>
Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

error: BR/EDR and LE connection failure reasons

The source of Connect() failures can be divided into the following
three.
- bluetoothd's device interface state transition and profile state
  transition
- Kernel's L2CAP layer state transition
- Potential HCI error codes returned by the remote device

Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Howard Chung <howardchung@google.com>
Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

doc: Add errors.txt to describe errors of D-Bus method returns

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

adv_monitor: Mark the device as lost on device_lost_timeout

Mark the device as lost on device_lost_timeout so that it can be found
again next time.

Verified this by adding a monitor using bluetoothctl and confirming that
the DeviceLost event is getting triggered when bt peer stops advertising
and DeviceFound event gets triggered again when the bt peer restarts the
advertising.

Reviewed-by: Yun-Hao Chung <howardchung@google.com>
Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

gatt: Allow GATT server to dicate CCC permissions

Allow a GATT server to impose write permissions/restrictions on a CCC by
setting additional `X-notify` and `X-indicate` flags on its associated
characteristic.

This allows a developer to require encryption/authentication in order
for a GATT client to subscribe to server-initiated updates.

```
[bluetooth]# register-characteristic\
4b75f0f8-1f23-46b1-900c-5bbabcd5ca93 encrypt-read,encrypt-notify

[NEW] Characteristic (Handle 0x0000)
        /org/bluez/app/service0/chrc17
        4b75f0f8-1f23-46b1-900c-5bbabcd5ca93
        Vendor specific
[/org/bluez/app/service0/chrc17] Enter value: 42
```

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

doc/gatt-api: Add 'X-notify`/`X-indicate`

Update docs to reflect the addition of the `X-notify` and `X-indicate`
characteristic flags, which allow a GATT server to restrict CCC write
permissions.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mgmt-tester: Add suspend/resume test cases

This patch adds the suspend/resume test cases:

Suspend/Resume - Success 1 (Suspend)
Suspend/Resume - Success 2 (Resume)
Suspend/Resume - Success 3 (Device in WL)
Suspend/Resume - Success 4 (Advertising)
Suspend/Resume - Success 5 (Pairing - Legacy)
Suspend/Resume - Success 6 (Pairing - SSP)

Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mgmt-tester: Fix Read Experiemental Feature test case

The quality report feature is supported only if the device support it.
Current emulator/btdev doesn't support it yet.

This patch updates the supported experimental feature list to align with
the current btdev implementation.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

gatt: Fix not cleaning up when disconnected

There is a current use after free possible on a gatt server if a client
disconnects while a WriteValue call is being processed with dbus.

This patch includes the addition of a pending disconnect callback to handle
cleanup better if a disconnect occurs during a write, an acquire write
or read operation using bt_att_register_disconnect with the cb.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

client: Print MTU on attribute-info

This prints the MTU of the characteristic when available.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

gatt: Emit PropertiesChanged("MTU") when MTU is exchanged

This notifies client when the ATT MTU changes.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

shared/att: Add bt_att_register_exchange

This adds bt_att_register_exchange which can be used to register
handlers that gets notified when the MTU gets changed via MTU exchange
procedure.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

gatt: Add implementation of GattCharacteristic1.MTU

This implements MTU property in GattCharacteristic1 interface.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

gatt-api: Add MTU property to GattCharacteristic1

This adds MTU properyt to GattCharacteristic1 which can be used in
order to determine how much data can be read/write using non-long
procedures which sometimes is the only thing the remote device
supports.

Fixes: https://github.com/bluez/bluez/issues/199
Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

doc/tester-config: Enable KASAN

This patch adds CONFIG_KASAN=y in tester config.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

doc/tester-config: Enable Android Extension

This patch adds Android Extension in tester config.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

doc/tester-config: Enable Microsoft Extension

This patch adds Microsoft Extension in tester config.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mesh-cfgclient: Export configuration database

This adds main menu command "export-db".
When the command is invoked, JSON configuration object is
cloned and trimmed of extraneous properties.
Information about netkeys, appkeys and device keys are obtained
from bluetooth-meshd by calling ExportKeys() method.
The obtained key values are recorded in the export JSON object.

Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mesh-cfgclient: Excluded addresses property

The correct name for a property that contains a list of addresses
not allowed in circulation is "networkExclusions"
The "excluded" property in "nodes" array entry is used to indicated that
this node has been removed from a mesh network and it's address should not
be re-used.

Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mesh-cfgclient: Store UUIDs in standard format

Use standard xxxx-xx-xx-xx-xxxxxxxx format for string
representation of mesh and node UUIDs in stored configuration.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

mesh: Implement ExportKeys() method

Add implementation for new method ExportKeys() on
org.bluez.mesh.Management1 interface.
This method is used by the authorized application to export information
about network keys, application keys and device keys present in the
local key database.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

doc/mesh-api: Add ExportKeys call

Add description for a new method:
ExportKeys() on org.bluez.mesh.Management1 interface.

This method is used by the authorized application to export information
about network keys, application keys and device keys present in the local
key database.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mesh-cfgclient: Add group parent address for DB compliance

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mesh-cfgclient: Store remote's heartbeat sub/pub

Store remote node's heartbeat publication or subscription info upon
receiving CONFIG_HEARTBEAT_PUB_STATUS or CONFIG_HEARTBEAT_SUB_STATUS
messages when the messages' status code is set to Success.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mesh-cfgclient: Save remote node feature setting

Save the information for remote node's relay, friend, proxy and
secure network beacon settings.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mesh-cfgclient: Rename mesh-db APIs for consistency

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mesh-cfgclient: Check the result of config save

After successful completion of configuration commands that change
configuration state of network, the updates are expected to be
recorded in configuration file. If for the results are not saved,
print a warning message.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mesh-cfgclient: Store remote's model publication info

Update remote node's model publication after a successful completion
of "pub-set" or "pub-get" commands.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mesh-cfgclient: Disallow model commands w/o composition

If remote node's composition hasn't been acquired, disallow commands
that change model state (that is, bindings, subscriptions, publications).
Prompt to run "get-composition" command first.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mesh-cfgclient: Store remote node's model subs

Update remote node's model subscriptions after a successful completion
of "sub-add", "sub-del", "sub-wrt" and "sub-del_all" commands.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mesh-cfgclient: Store remote node's model bindings

Update remote node's model binding after a successful completion
of "bind" or "unbind" commands.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mesh-cfgclient: Overwrite config values when adding new ones

This changes common utilities used in mesh-db.c to replace old values
by default whenever a new value is written.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mesh: Add new info to stored remote nodes

When adding a new remote node into configuration database,
initialize additional default properties:
"excluded": false
"security": "secure"
"configComplete": false

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mesh-cfgclient: Keep track of updated keys

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mesh-cfgclient: Update stored NetKey and AppKey

NetKeys:
- Record additional properties: "name", "minSecurity", "timestamp"

AppKeys:
- Record additional property: "name"

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mesh-cfgclient: Add timestamp to config database

This adds timestamp property to the configuration database.
The UTC timestamp format: YYYY-MM-DDThh:mm:ssZ

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools/mesh-cfgclient: Save provisioner info

This adds "provisioners" property to the config database.
The property includes the provisioner's name, UUID of the provisioner
device (corresponds to the local node), allocated unicast, group and
scene ranges.
The current implementation limitations:
- only one provisioner in the mesh network is supported,
- the unicast range is assumed to be contiguous,
- the group range is assumed to be contiguous,
- no support for scenes (empty array).

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

gatt: remove superfluous extended properties

BlueZ contained superfluous properties that not only did nothing of
value, but needlessly created CEP descriptors for any characteristic
with a secure/encrypted/authenticated flag applied to it.

This actually deviated from the spec(Bluetooth core 5.3, 3.3.3.1) by
setting the reserved bits in the CEPD.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

avrcp: Fix browsing support in SDP record

Browsing features shall only be marked as supported when ERTM is also
available.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

avctp: Fix not handling when kernel has ERTM disabled

If kernel module is loaded with disable_ertm ERTM won't be available
thus browsing channel won't be able to be created, but it shall be
possible to still use AVRCP without it.

Fixes: https://github.com/bluez/bluez/issues/209
Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

device: Check both bearers's paired status upon removal of connection

Because Link Key for BREDR can be transformed into LTK for LE (and
vice versa), there is a possibility of getting 'paired' on either of
BREDR/LE without actually connected using the aforementioned bearer.

When removing the connection, we should check both bearers's paired
and bonded status rather than just the one getting disconnected.

Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

adapter: Truncate number of LTKs loaded if over MGMT MTU

If MGMT MTU cannot accomodate all the existing LTKs only send the ones
that fit in the MTU and leave the remaining as unpaired.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

shared/mgmt: Add mgmt_get_mtu

This adds mgmt_get_mtu function which can be used to query the
transport MTU.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

lib: Fix HCI_MAX_ACL_SIZE

HCI_MAX_ACL_SIZE actually includes the maximum frames in AMP controller
so this changes it to properly define the max ACL frames on non-AMP
controllers and introduces a dedicated define for AMP controller as
HCI_MAX_AMP_SIZE.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

shared/mgmt: Set MTU to UINT16_MAX

This sets MTU of MGMT socket to UINT16_MAX since some commands may
require more than the default size (e.g. Load LTKs).

Fixes: https://github.com/bluez/bluez/issues/201
Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

doc: Inclusive language update

Update the docs to reflect the changes for the other inclusive
language updates.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

unit/mesh: Inclusive language changes

According to
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf
"flooding" is the preferred term.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

mesh: Inclusive language changes

According to
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf
"flooding", "accept list", and "reject list" are the preferred terms.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

client: Inclusive language changes

Use "parent" to describe dbus hierarchy.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

src: Inclusive language changes

BT core spec 5.3 promotes the usage of inclusive languages.
This CL replaces some terms with the more appropriate counterparts,
such as "central", "peripheral", "accept list", and "reject list".
Note that some suggestions come from
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf

Also use "primary" to refer the global mgmt struct.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

profiles: Inclusive language changes

BT core spec 5.3 promotes the usage of inclusive languages.
This CL replaces some terms with the more appropriate counterparts,
such as "central" and "peripheral".

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

plugins/sixaxis: Inclusive language changes

BT core spec 5.3 promotes the usage of inclusive languages.
This CL uses "central" as it is deemed to be more appropriate.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools: Deprecate some input parameters to align with inclusive language

Some input parameter names are not appropriate and needs to be
updated. However, doing so might cause friction with the current
workflow and documents.

This patch deprecates the inappropriate names and replaces them with
the more appropriate substitutes, while still keeping the old terms
usable to not break the workflow of users.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools: Inclusive language changes

BT core spec 5.3 promotes the usage of inclusive languages.
This CL replaces some terms with the more appropriate counterparts,
such as "central", "peripheral", "accept list", "reject list", and
"temporary link key". Note that some suggestions come from
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

emulator: Inclusive language changes

BT core spec 5.3 promotes the usage of inclusive languages.
This CL replaces some terms with the more appropriate counterparts,
such as "central", "peripheral", and "accept list".

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

monitor: Inclusive language changes

BT core spec 5.3 promotes the usage of inclusive languages.
This CL replaces some terms with the more appropriate counterparts,
such as "central", "peripheral", "link key", and "accept list"

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

btio: Inclusive language changes

BT core spec 5.3 promotes the usage of inclusive languages.
This CL uses "central" as it is deemed to be more appropriate.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

lib: Inclusive language changes

BT core spec 5.3 promotes the usage of inclusive languages.
This CL replaces some terms with the more appropriate counterparts,
such as "central", "peripheral", and "accept list".

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

media: Add media_player prefix for callback

This adds media_player prefix to callback so it is inline with pause
which now uses such callback due to possible clash with libc
definition.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

media: Fix build with glibc >= 2.34

pause() is defined in glibc since the very early times; it appears in
upstream commit 28f540f45bba (initial import) in 1995 [0].

Bluez has been defining a function named pause() for ages too, since
commit caab74c97542 (media: Implement new callbacks for pass-through
operations) in 2013 [1]

With the recent bump to glibc 2.34.xxx, the build now fails because the
two pause() clash:

profiles/audio/media.c:1284:13: error: conflicting types for 'pause'
 1284 | static bool pause(void *user_data)
      |             ^~~~~
In file included from /tmp/instance-0/output-1/per-package/bluez5_utils/host/s390x-buildroot-linux-gnu/sysroot/usr/include/bits/sigstksz.h:24,
                 from /tmp/instance-0/output-1/per-package/bluez5_utils/host/s390x-buildroot-linux-gnu/sysroot/usr/include/signal.h:328,
                 from /tmp/instance-0/output-1/per-package/bluez5_utils/host/bin/../s390x-buildroot-linux-gnu/sysroot/usr/include/glib-2.0/glib/gbacktrace.h:36,
                 from /tmp/instance-0/output-1/per-package/bluez5_utils/host/bin/../s390x-buildroot-linux-gnu/sysroot/usr/include/glib-2.0/glib.h:34,
                 from profiles/audio/media.c:21:
/tmp/instance-0/output-1/per-package/bluez5_utils/host/s390x-buildroot-linux-gnu/sysroot/usr/include/unistd.h:489:12: note: previous declaration of 'pause' was here
  489 | extern int pause (void);
      |            ^~~~~

The culprit is indeed glibc 2.34, as can be seen in this result matrix:

         \   bluez5_utils
    glibc \  5.60  |  5.61
    -------\-------+--------
    2.33   |  OK   |   OK
    -------+-------+--------
    2.34   |  KO   |   KO

The underlying reason that pause() is now causing issues with glibc 2.34
is not obvious: glibc is a big beast, and finding such issues is not
easy. However, we can see that the pause() provided by NPTL has been
dropped in favour of the generic one, so maybe this is causing symbol
visibility or weakness to change or something...

We fix that by renaming the local pause() in bluez5_utils with a
namespace-prefix, like some other functions there already have.

Fixes:
  - http://autobuild.buildroot.org/results/c4fbface34be8815838fd7201621d7a8fddd32c5
  - http://autobuild.buildroot.org/results/62b88740f19fbe4a1ad7959dc141d539eb88c1f8

[0] https://sourceware.org/git/?p=glibc.git;a=commit;h=28f540f45bbacd939bfd07f213bcad2bf730b1bf
[1] https://github.com/bluez/bluez/commit/caab74c97542a56b591f0b16b44ab6ba4b40f0f5

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

tools: userchan-tester: Add test case for the closing channel

This patch adds a test casse for checking the controller power state
after closing the user channel.

When the user channel is closed, the controller should be powered down
state.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>

lib: Fix variable-length array declarations in hci structures

Use of zero as the size for arrays as the last element of a structure
is a GNU C extension, which as of GCC 10 produces diagnostics when
values in the extended array are referenced.  Switch to the C99
standard idiom for flexible array members, already in use in a few
other headers.

Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Ayush Garg <ayush.garg@samsung.com>