of: Make OF framebuffer device names unique

[ Upstream commit 241d2fb56a18473af5f2ff0d512992a996eb64dd ]

Since Linux 5.19 this error is observed:

sysfs: cannot create duplicate filename '/devices/platform/of-display'

This is because multiple devices with the same name 'of-display' are
created on the same bus. Update the code to create numbered device names
for the displays.

Also, fix a node refcounting issue when exiting the boot display loop.

cc: linuxppc-dev@lists.ozlabs.org
References: https://bugzilla.kernel.org/show_bug.cgi?id=216095
Fixes: 52b1b46c39ae ("of: Create platform devices for OF framebuffers")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Link: https://lore.kernel.org/r/20230201162247.3575506-1-robh@kernel.org
[robh: Rework to avoid node refcount leaks]
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: fix bug with DSCP copy to v6 from v4 tunnel

[ Upstream commit 6028da3f125fec34425dbd5fec18e85d372b2af6 ]

When copying the DSCP bits for decap-dscp into IPv6 don't assume the
outer encap is always IPv6. Instead, as with the inner IPv4 case, copy
the DSCP bits from the correctly saved "tos" value in the control block.

Fixes: 227620e29509 ("[IPSEC]: Separate inner/outer mode processing on input")
Signed-off-by: Christian Hopps <chopps@chopps.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/usnic: use iommu_map_atomic() under spin_lock()

[ Upstream commit b7e08a5a63a11627601915473c3b569c1f6c6c06 ]

usnic_uiom_map_sorted_intervals() is called under spin_lock(), iommu_map()
might sleep, use iommu_map_atomic() to avoid potential sleep in atomic
context.

Fixes: e3cf00d0a87f ("IB/usnic: Add Cisco VIC low-level hardware driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230129093757.637354-1-yangyingliang@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Fix potential NULL-ptr-dereference

[ Upstream commit 5d9745cead1f121974322b94ceadfb4d1e67960e ]

in_dev_get() can return NULL which will cause a failure once idev is
dereferenced in in_dev_for_each_ifa_rtnl(). This patch adds a
check for NULL value in idev beforehand.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 146b9756f14c ("RDMA/irdma: Add connection manager")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20230126185230.62464-1-n.zhandarovich@fintech.ru
Reviewed-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: annotate data-race around use_time

[ Upstream commit 0a9e5794b21e2d1303759ff8fe5f9215db7757ba ]

KCSAN reported multiple cpus can update use_time
at the same time.

Adds READ_ONCE()/WRITE_ONCE() annotations.

Note that 32bit arches are not fully protected,
but they will probably no longer be supported/used in 2106.

BUG: KCSAN: data-race in __xfrm_policy_check / __xfrm_policy_check

write to 0xffff88813e7ec108 of 8 bytes by interrupt on cpu 0:
__xfrm_policy_check+0x6ae/0x17f0 net/xfrm/xfrm_policy.c:3664
__xfrm_policy_check2 include/net/xfrm.h:1174 [inline]
xfrm_policy_check include/net/xfrm.h:1179 [inline]
xfrm6_policy_check+0x2e9/0x320 include/net/xfrm.h:1189
udpv6_queue_rcv_one_skb+0x48/0xa30 net/ipv6/udp.c:703
udpv6_queue_rcv_skb+0x2d6/0x310 net/ipv6/udp.c:792
udp6_unicast_rcv_skb+0x16b/0x190 net/ipv6/udp.c:935
__udp6_lib_rcv+0x84b/0x9b0 net/ipv6/udp.c:1020
udpv6_rcv+0x4b/0x50 net/ipv6/udp.c:1133
ip6_protocol_deliver_rcu+0x99e/0x1020 net/ipv6/ip6_input.c:439
ip6_input_finish net/ipv6/ip6_input.c:484 [inline]
NF_HOOK include/linux/netfilter.h:302 [inline]
ip6_input+0xca/0x180 net/ipv6/ip6_input.c:493
dst_input include/net/dst.h:454 [inline]
ip6_rcv_finish+0x1e9/0x2d0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:302 [inline]
ipv6_rcv+0x85/0x140 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5482 [inline]
__netif_receive_skb+0x8b/0x1b0 net/core/dev.c:5596
process_backlog+0x23f/0x3b0 net/core/dev.c:5924
__napi_poll+0x65/0x390 net/core/dev.c:6485
napi_poll net/core/dev.c:6552 [inline]
net_rx_action+0x37e/0x730 net/core/dev.c:6663
__do_softirq+0xf2/0x2c7 kernel/softirq.c:571
do_softirq+0xb1/0xf0 kernel/softirq.c:472
__local_bh_enable_ip+0x6f/0x80 kernel/softirq.c:396
__raw_read_unlock_bh include/linux/rwlock_api_smp.h:257 [inline]
_raw_read_unlock_bh+0x17/0x20 kernel/locking/spinlock.c:284
wg_socket_send_skb_to_peer+0x107/0x120 drivers/net/wireguard/socket.c:184
wg_packet_create_data_done drivers/net/wireguard/send.c:251 [inline]
wg_packet_tx_worker+0x142/0x360 drivers/net/wireguard/send.c:276
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308

write to 0xffff88813e7ec108 of 8 bytes by interrupt on cpu 1:
__xfrm_policy_check+0x6ae/0x17f0 net/xfrm/xfrm_policy.c:3664
__xfrm_policy_check2 include/net/xfrm.h:1174 [inline]
xfrm_policy_check include/net/xfrm.h:1179 [inline]
xfrm6_policy_check+0x2e9/0x320 include/net/xfrm.h:1189
udpv6_queue_rcv_one_skb+0x48/0xa30 net/ipv6/udp.c:703
udpv6_queue_rcv_skb+0x2d6/0x310 net/ipv6/udp.c:792
udp6_unicast_rcv_skb+0x16b/0x190 net/ipv6/udp.c:935
__udp6_lib_rcv+0x84b/0x9b0 net/ipv6/udp.c:1020
udpv6_rcv+0x4b/0x50 net/ipv6/udp.c:1133
ip6_protocol_deliver_rcu+0x99e/0x1020 net/ipv6/ip6_input.c:439
ip6_input_finish net/ipv6/ip6_input.c:484 [inline]
NF_HOOK include/linux/netfilter.h:302 [inline]
ip6_input+0xca/0x180 net/ipv6/ip6_input.c:493
dst_input include/net/dst.h:454 [inline]
ip6_rcv_finish+0x1e9/0x2d0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:302 [inline]
ipv6_rcv+0x85/0x140 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5482 [inline]
__netif_receive_skb+0x8b/0x1b0 net/core/dev.c:5596
process_backlog+0x23f/0x3b0 net/core/dev.c:5924
__napi_poll+0x65/0x390 net/core/dev.c:6485
napi_poll net/core/dev.c:6552 [inline]
net_rx_action+0x37e/0x730 net/core/dev.c:6663
__do_softirq+0xf2/0x2c7 kernel/softirq.c:571
do_softirq+0xb1/0xf0 kernel/softirq.c:472
__local_bh_enable_ip+0x6f/0x80 kernel/softirq.c:396
__raw_read_unlock_bh include/linux/rwlock_api_smp.h:257 [inline]
_raw_read_unlock_bh+0x17/0x20 kernel/locking/spinlock.c:284
wg_socket_send_skb_to_peer+0x107/0x120 drivers/net/wireguard/socket.c:184
wg_packet_create_data_done drivers/net/wireguard/send.c:251 [inline]
wg_packet_tx_worker+0x142/0x360 drivers/net/wireguard/send.c:276
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308

value changed: 0x0000000063c62d6f -> 0x0000000063c62d70

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 4185 Comm: kworker/1:2 Tainted: G W 6.2.0-rc4-syzkaller-00009-gd532dd102151-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: wg-crypt-wg0 wg_packet_tx_worker

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/IPoIB: Fix legacy IPoIB due to wrong number of queues

[ Upstream commit e632291a2dbce45a24cddeb5fe28fe71d724ba43 ]

The cited commit creates child PKEY interfaces over netlink will
multiple tx and rx queues, but some devices doesn't support more than 1
tx and 1 rx queues. This causes to a crash when traffic is sent over the
PKEY interface due to the parent having a single queue but the child
having multiple queues.

This patch fixes the number of queues to 1 for legacy IPoIB at the
earliest possible point in time.

BUG: kernel NULL pointer dereference, address: 000000000000036b
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 4 PID: 209665 Comm: python3 Not tainted 6.1.0_for_upstream_min_debug_2022_12_12_17_02 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:kmem_cache_alloc+0xcb/0x450
Code: ce 7e 49 8b 50 08 49 83 78 10 00 4d 8b 28 0f 84 cb 02 00 00 4d 85 ed 0f 84 c2 02 00 00 41 8b 44 24 28 48 8d 4a
01 49 8b 3c 24 <49> 8b 5c 05 00 4c 89 e8 65 48 0f c7 0f 0f 94 c0 84 c0 74 b8 41 8b
RSP: 0018:ffff88822acbbab8 EFLAGS: 00010202
RAX: 0000000000000070 RBX: ffff8881c28e3e00 RCX: 00000000064f8dae
RDX: 00000000064f8dad RSI: 0000000000000a20 RDI: 0000000000030d00
RBP: 0000000000000a20 R08: ffff8882f5d30d00 R09: ffff888104032f40
R10: ffff88810fade828 R11: 736f6d6570736575 R12: ffff88810081c000
R13: 00000000000002fb R14: ffffffff817fc865 R15: 0000000000000000
FS:  00007f9324ff9700(0000) GS:ffff8882f5d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000036b CR3: 00000001125af004 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 skb_clone+0x55/0xd0
 ip6_finish_output2+0x3fe/0x690
 ip6_finish_output+0xfa/0x310
 ip6_send_skb+0x1e/0x60
 udp_v6_send_skb+0x1e5/0x420
 udpv6_sendmsg+0xb3c/0xe60
 ? ip_mc_finish_output+0x180/0x180
 ? __switch_to_asm+0x3a/0x60
 ? __switch_to_asm+0x34/0x60
 sock_sendmsg+0x33/0x40
 __sys_sendto+0x103/0x160
 ? _copy_to_user+0x21/0x30
 ? kvm_clock_get_cycles+0xd/0x10
 ? ktime_get_ts64+0x49/0xe0
 __x64_sys_sendto+0x25/0x30
 do_syscall_64+0x3d/0x90
 entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f9374f1ed14
Code: 42 41 f8 ff 44 8b 4c 24 2c 4c 8b 44 24 20 89 c5 44 8b 54 24 28 48 8b 54 24 18 b8 2c 00 00 00 48 8b 74 24 10 8b
7c 24 08 0f 05 <48> 3d 00 f0 ff ff 77 34 89 ef 48 89 44 24 08 e8 68 41 f8 ff 48 8b
RSP: 002b:00007f9324ff7bd0 EFLAGS: 00000293 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f9324ff7cc8 RCX: 00007f9374f1ed14
RDX: 00000000000002fb RSI: 00007f93000052f0 RDI: 0000000000000030
RBP: 0000000000000000 R08: 00007f9324ff7d40 R09: 000000000000001c
R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000
R13: 000000012a05f200 R14: 0000000000000001 R15: 00007f9374d57bdc
 </TASK>

Fixes: dbc94a0fb817 ("IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/95eb6b74c7cf49fa46281f9d056d685c9fa11d38.1674584576.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm/compat: prevent potential spectre v1 gadget in xfrm_xlate32_attr()

[ Upstream commit b6ee896385380aa621102e8ea402ba12db1cabff ]

  int type = nla_type(nla);

  if (type > XFRMA_MAX) {
            return -EOPNOTSUPP;
  }

@type is then used as an array index and can be used
as a Spectre v1 gadget.

  if (nla_len(nla) < compat_policy[type].len) {

array_index_nospec() can be used to prevent leaking
content of kernel memory to malicious users.

Fixes: 5106f4a8acff ("xfrm/compat: Add 32=>64-bit messages translator")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Dmitry Safonov <dima@arista.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/hfi1: Restore allocated resources on failed copyout

[ Upstream commit 6601fc0d15ffc20654e39486f9bef35567106d68 ]

Fix a resource leak if an error occurs.

Fixes: f404ca4c7ea8 ("IB/hfi1: Refactor hfi_user_exp_rcv_setup() IOCTL")
Signed-off-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/167354736291.2132367.10894218740150168180.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: compat: change expression for switch in xfrm_xlate64

[ Upstream commit eb6c59b735aa6cca77cdbb59cc69d69a0d63d986 ]

Compare XFRM_MSG_NEWSPDINFO (value from netlink
configuration messages enum) with nlh_src->nlmsg_type
instead of nlh_src->nlmsg_type - XFRM_MSG_BASE.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 4e9505064f58 ("net/xfrm/compat: Copy xfrm_spdattr_type_t atributes")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Acked-by: Dmitry Safonov <0x7f454c46@gmail.com>
Tested-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: logitech: Disable hi-res scrolling on USB

commit 690eb7dec72ae52d1d710d14a451844b4d0f4f19 upstream.

On some Logitech mice, such as the G903, and possibly the G403, the HID
events are generated on a different interface to the HID++ one.

If we enable hi-res through the HID++ interface, the HID interface
wouldn't know anything about it, and handle the events as if they were
regular scroll events, making the mouse unusable.

Disable hi-res scrolling on those devices until we implement scroll
events through HID++.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Tested-by: Tobias Klausmann <klausman@schwarzvogel.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216885
Fixes: 908d325e1665 ("HID: logitech-hidpp: Detect hi-res scrolling support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230203101800.139380-1-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: j1939: do not wait 250 ms if the same addr was already claimed

commit 4ae5e1e97c44f4654516c1d41591a462ed62fa7b upstream.

The ISO 11783-5 standard, in "4.5.2 - Address claim requirements", states:
  d) No CF shall begin, or resume, transmission on the network until 250
     ms after it has successfully claimed an address except when
     responding to a request for address-claimed.

But "Figure 6" and "Figure 7" in "4.5.4.2 - Address-claim
prioritization" show that the CF begins the transmission after 250 ms
from the first AC (address-claimed) message even if it sends another AC
message during that time window to resolve the address contention with
another CF.

As stated in "4.4.2.3 - Address-claimed message":
  In order to successfully claim an address, the CF sending an address
  claimed message shall not receive a contending claim from another CF
  for at least 250 ms.

As stated in "4.4.3.2 - NAME management (NM) message":
  1) A commanding CF can
     d) request that a CF with a specified NAME transmit the address-
        claimed message with its current NAME.
  2) A target CF shall
     d) send an address-claimed message in response to a request for a
        matching NAME

Taking the above arguments into account, the 250 ms wait is requested
only during network initialization.

Do not restart the timer on AC message if both the NAME and the address
match and so if the address has already been claimed (timer has expired)
or the AC message has been sent to resolve the contention with another
CF (timer is still running).

Signed-off-by: Devid Antonio Filoni <devid.filoni@egluetechnologies.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20221125170418.34575-1-devid.filoni@egluetechnologies.com
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of/address: Return an error when no valid dma-ranges are found

commit f6933c01e42d2fc83b9133ed755609e4aac6eadd upstream.

Commit 7a8b64d17e35 ("of/address: use range parser for of_dma_get_range")
converted the parsing of dma-range properties to use code shared with the
PCI range parser. The intent was to introduce no functional changes however
in the case where we fail to translate the first resource instead of
returning -EINVAL the new code we return 0. Restore the previous behaviour
by returning an error if we find no valid ranges, the original code only
handled the first range but subsequently support for parsing all supplied
ranges was added.

This avoids confusing code using the parsed ranges which doesn't expect to
successfully parse ranges but have only a list terminator returned, this
fixes breakage with so far as I can tell all DMA for on SoC devices on the
Socionext Synquacer platform which has a firmware supplied DT. A bisect
identified the original conversion as triggering the issues there.

Fixes: 7a8b64d17e35 ("of/address: use range parser for of_dma_get_range")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Luca Di Stefano <luca.distefano@linaro.org>
Cc: 993612@bugs.debian.org
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230126-synquacer-boot-v2-1-cb80fd23c4e2@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix poll() and select() do not work on per_cpu trace_pipe and trace_pipe_raw

commit 3e46d910d8acf94e5360126593b68bf4fee4c4a1 upstream.

poll() and select() on per_cpu trace_pipe and trace_pipe_raw do not work
since kernel 6.1-rc6. This issue is seen after the commit
42fb0a1e84ff525ebe560e2baf9451ab69127e2b ("tracing/ring-buffer: Have
polling block on watermark").

This issue is firstly detected and reported, when testing the CXL error
events in the rasdaemon and also erified using the test application for poll()
and select().

This issue occurs for the per_cpu case, when calling the ring_buffer_poll_wait(),
in kernel/trace/ring_buffer.c, with the buffer_percent > 0 and then wait until the
percentage of pages are available. The default value set for the buffer_percent is 50
in the kernel/trace/trace.c.

As a fix, allow userspace application could set buffer_percent as 0 through
the buffer_percent_fops, so that the task will wake up as soon as data is added
to any of the specific cpu buffer.

Link: https://lore.kernel.org/linux-trace-kernel/20230202182309.742-2-shiju.jose@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <mchehab@kernel.org>
Cc: <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: 42fb0a1e84ff5 ("tracing/ring-buffer: Have polling block on watermark")
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "PCI/ASPM: Refactor L1 PM Substates Control Register programming"

commit ff209ecc376a2ea8dd106a1f594427a5d94b7dd3 upstream.

This reverts commit 5e85eba6f50dc288c22083a7e213152bcc4b8208.

Thomas Witt reported that 5e85eba6f50d ("PCI/ASPM: Refactor L1 PM Substates
Control Register programming") broke suspend/resume on a Tuxedo
Infinitybook S 14 v5, which seems to use a Clevo L140CU Mainboard.

The main symptom is:

  iwlwifi 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible
  nvme 0000:03:00.0: Unable to change power state from D3hot to D0, device inaccessible

and the machine is only partially usable after resume.  It can't run dmesg
and can't do a clean reboot.  This happens on every suspend/resume cycle.

Revert 5e85eba6f50d until we can figure out the root cause.

Fixes: 5e85eba6f50d ("PCI/ASPM: Refactor L1 PM Substates Control Register programming")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216877
Reported-by: Thomas Witt <kernel@witt.link>
Tested-by: Thomas Witt <kernel@witt.link>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v6.1+
Cc: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "PCI/ASPM: Save L1 PM Substates Capability for suspend/resume"

commit a7152be79b627428c628da2a887ca4b2512a78fd upstream.

This reverts commit 4ff116d0d5fd8a025604b0802d93a2d5f4e465d1.

Tasev Nikola and Mark Enriquez reported that resume from suspend was broken
in v6.1-rc1.  Tasev bisected to a47126ec29f5 ("PCI/PTM: Cache PTM
Capability offset"), but we can't figure out how that could be related.

Mark saw the same symptoms and bisected to 4ff116d0d5fd ("PCI/ASPM: Save L1
PM Substates Capability for suspend/resume"), which does have a connection:
it restores L1 Substates configuration while ASPM L1 may be enabled:

  pci_restore_state
    pci_restore_aspm_l1ss_state
      aspm_program_l1ss
        pci_write_config_dword(PCI_L1SS_CTL1, ctl1)         # L1SS restore
    pci_restore_pcie_state
      pcie_capability_write_word(PCI_EXP_LNKCTL, cap[i++])  # L1 restore

which is a problem because PCIe r6.0, sec 5.5.4, requires that:

  If setting either or both of the enable bits for ASPM L1 PM
  Substates, both ports must be configured as described in this
  section while ASPM L1 is disabled.

Separately, Thomas Witt reported that 5e85eba6f50d ("PCI/ASPM: Refactor L1
PM Substates Control Register programming") broke suspend/resume, and it
depends on 4ff116d0d5fd.

Revert 4ff116d0d5fd ("PCI/ASPM: Save L1 PM Substates Capability for
suspend/resume") to fix the resume issue and enable revert of 5e85eba6f50d
to fix the issue Thomas reported.

Note that reverting 4ff116d0d5fd means L1 Substates config may be lost on
suspend/resume.  As far as we know the system will use more power but will
still *work* correctly.

Fixes: 4ff116d0d5fd ("PCI/ASPM: Save L1 PM Substates Capability for suspend/resume")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216782
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216877
Reported-by: Tasev Nikola <tasev.stefanoska@skynet.be>
Reported-by: Mark Enriquez <enriquezmark36@gmail.com>
Reported-by: Thomas Witt <kernel@witt.link>
Tested-by: Mark Enriquez <enriquezmark36@gmail.com>
Tested-by: Thomas Witt <kernel@witt.link>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v6.1+
Cc: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: fix mute/micmute LEDs don't work for a HP platform.

commit 6c4715aa5b0ab1c0d35780b7c552e952dbb5515d upstream.

There is a HP platform needs ALC236_FIXUP_HP_GPIO_LED quirk to
make mic-mute/audio-mute working.

Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230207083011.100189-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for ASUS UM3402 using CS35L41

commit 7a17e8423a133a6ac238462126d7f88faaccc681 upstream.

This Asus Zenbook laptop use Realtek HDA codec combined with
2xCS35L41 Amplifiers using I2C with External Boost.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230206150019.3825120-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Enable mute/micmute LEDs on HP Elitebook, 645 G9

commit 9a6804aa1c92cd28e89e746ace44d5ba101db76c upstream.

The HP Elitebook 645 G9 laptop (with motherboard model 89D2) uses the
ALC236 codec and requires the alc236_fixup_hp_mute_led_micmute_vref
fixup in order to enable mute/micmute LEDs.

Note: the alc236_fixup_hp_gpio_led fixup, which is used by the Elitebook
640 G9, does not work with the 645 G9.

[ rearranged the entry in SSID order -- tiwai ]

Signed-off-by: Elvis Angelaccio <elvis.angelaccio@kde.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/4055cb48-e228-8a13-524d-afbb7aaafebe@kde.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book2 Pro 360

commit bd401fd730cbcb0717bbc5438f15084db10f9259 upstream.

Samsung Galaxy Book2 Pro 360 (13" 2022 NP930QED-KA1FR) with codec SSID
144d:ca03 requires the same workaround for enabling the speaker amp
like other Samsung models with ALC298 codec.

Cc: <stable@vger.kernel.org>
Signed-off-by: Guillaume Pinot <texitoi@texitoi.eu>
Link: https://lore.kernel.org/r/20230129171338.17249-1-texitoi@texitoi.eu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: emux: Avoid potential array out-of-bound in snd_emux_xg_control()

commit 6a32425f953b955b4ff82f339d01df0b713caa5d upstream.

snd_emux_xg_control() can be called with an argument 'param' greater
than size of 'control' array. It may lead to accessing 'control'
array at a wrong index.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Artemii Karasev <karasev@ispras.ru>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230207132026.2870-1-karasev@ispras.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add Positivo N14KP6-TG

commit 88d18b8896bd98e636b632f805b7e84e61458255 upstream.

Positivo N14KP6-TG (1c6c:1251)
require quirk for enabling headset-mic

Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230207183720.2519-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zlib: zero-initialize zlib workspace

commit eadd7deca0ad8a83edb2b894d8326c78e78635d6 upstream.

KMSAN reports uses of uninitialized memory in zlib's longest_match()
called on memory originating from zlib_alloc_workspace().
This issue is known by zlib maintainers and is claimed to be harmless,
but to be on the safe side we'd better initialize the memory.

Link: https://zlib.net/zlib_faq.html#faq36
Reported-by: syzbot+14d9e7602ebdf7ec0a60@syzkaller.appspotmail.com
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: limit device extents to the device size

commit 3c538de0f2a74d50aff7278c092f88ae59cee688 upstream.

There was a recent regression in btrfs/177 that started happening with
the size class patches ("btrfs: introduce size class to block group
allocator").  This however isn't a regression introduced by those
patches, but rather the bug was uncovered by a change in behavior in
these patches.  The patches triggered more chunk allocations in the
^free-space-tree case, which uncovered a race with device shrink.

The problem is we will set the device total size to the new size, and
use this to find a hole for a device extent.  However during shrink we
may have device extents allocated past this range, so we could
potentially find a hole in a range past our new shrink size.  We don't
actually limit our found extent to the device size anywhere, we assume
that we will not find a hole past our device size.  This isn't true with
shrink as we're relocating block groups and thus creating holes past the
device size.

Fix this by making sure we do not search past the new device size, and
if we wander into any device extents that start after our device size
simply break from the loop and use whatever hole we've already found.

CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hv_netvsc: Allocate memory in netvsc_dma_map() with GFP_ATOMIC

commit c6aa9d3b43cd11ac13a8220368a3b0483c6751d4 upstream.

Memory allocations in the network transmit path must use GFP_ATOMIC
so they won't sleep.

Reported-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/lkml/8a4d08f94d3e6fe8b6da68440eaa89a088ad84f9.camel@redhat.com/
Fixes: 846da38de0e8 ("net: netvsc: Add Isolation VM support for netvsc driver")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1675714317-48577-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 6.1.11

Link: https://lore.kernel.org/r/20230207125634.292109991@linuxfoundation.org
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Skip invalid kfunc call in backtrack_insn

commit d3178e8a434b58678d99257c0387810a24042fb6 upstream.

The verifier skips invalid kfunc call in check_kfunc_call(), which
would be captured in fixup_kfunc_call() if such insn is not eliminated
by dead code elimination. However, this can lead to the following
warning in backtrack_insn(), also see [1]:

  ------------[ cut here ]------------
  verifier backtracking bug
  WARNING: CPU: 6 PID: 8646 at kernel/bpf/verifier.c:2756 backtrack_insn
  kernel/bpf/verifier.c:2756
__mark_chain_precision kernel/bpf/verifier.c:3065
mark_chain_precision kernel/bpf/verifier.c:3165
adjust_reg_min_max_vals kernel/bpf/verifier.c:10715
check_alu_op kernel/bpf/verifier.c:10928
do_check kernel/bpf/verifier.c:13821 [inline]
do_check_common kernel/bpf/verifier.c:16289
  [...]

So make backtracking conservative with this by returning ENOTSUPP.

  [1] https://lore.kernel.org/bpf/CACkBjsaXNceR8ZjkLG=dT3P=4A8SBsg0Z5h5PWLryF5=ghKq=g@mail.gmail.com/

Reported-by: syzbot+4da3ff23081bafe74fc2@syzkaller.appspotmail.com
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230104014709.9375-1-sunhao.th@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: Always check inode size of inline inodes

commit 70376c7ff31221f1d21db5611d8209e677781d3a upstream.

Check if the inode size of stuffed (inline) inodes is within the allowed
range when reading inodes from disk (gfs2_dinode_in()).  This prevents
us from on-disk corruption.

The two checks in stuffed_readpage() and gfs2_unstuffer_page() that just
truncate inline data to the maximum allowed size don't actually make
sense, and they can be removed now as well.

Reported-by: syzbot+7bb81dfa9cda07d9cd9d@syzkaller.appspotmail.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: Cosmetic gfs2_dinode_{in,out} cleanup

commit 7db354444ad8429e660b0f8145d425285d4f90ff upstream.

In each of the two functions, add an inode variable that points to
&ip->i_inode and use that throughout the rest of the function.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: brcmfmac: Check the count value of channel spec to prevent out-of-bounds reads

commit 4920ab131b2dbae7464b72bdcac465d070254209 upstream.

This patch fixes slab-out-of-bounds reads in brcmfmac that occur in
brcmf_construct_chaninfo() and brcmf_enable_bw40_2g() when the count
value of channel specifications provided by the device is greater than
the length of 'list->element[]', decided by the size of the 'list'
allocated with kzalloc(). The patch adds checks that make the functions
free the buffer and return -EINVAL if that is the case. Note that the
negative return is handled by the caller, brcmf_setup_wiphybands() or
brcmf_cfg80211_attach().

Found by a modified version of syzkaller.

Crash Report from brcmf_construct_chaninfo():
==================================================================
BUG: KASAN: slab-out-of-bounds in brcmf_setup_wiphybands+0x1238/0x1430
Read of size 4 at addr ffff888115f24600 by task kworker/0:2/1896

CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G        W  O      5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
 dump_stack_lvl+0x57/0x7d
 print_address_description.constprop.0.cold+0x93/0x334
 kasan_report.cold+0x83/0xdf
 brcmf_setup_wiphybands+0x1238/0x1430
 brcmf_cfg80211_attach+0x2118/0x3fd0
 brcmf_attach+0x389/0xd40
 brcmf_usb_probe+0x12de/0x1690
 usb_probe_interface+0x25f/0x710
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 bus_for_each_drv+0x123/0x1a0
 __device_attach+0x207/0x330
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 usb_set_configuration+0x984/0x1770
 usb_generic_driver_probe+0x69/0x90
 usb_probe_device+0x9c/0x220
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 bus_for_each_drv+0x123/0x1a0
 __device_attach+0x207/0x330
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 usb_new_device.cold+0x463/0xf66
 hub_event+0x10d5/0x3330
 process_one_work+0x873/0x13e0
 worker_thread+0x8b/0xd10
 kthread+0x379/0x450
 ret_from_fork+0x1f/0x30

Allocated by task 1896:
 kasan_save_stack+0x1b/0x40
 __kasan_kmalloc+0x7c/0x90
 kmem_cache_alloc_trace+0x19e/0x330
 brcmf_setup_wiphybands+0x290/0x1430
 brcmf_cfg80211_attach+0x2118/0x3fd0
 brcmf_attach+0x389/0xd40
 brcmf_usb_probe+0x12de/0x1690
 usb_probe_interface+0x25f/0x710
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 bus_for_each_drv+0x123/0x1a0
 __device_attach+0x207/0x330
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 usb_set_configuration+0x984/0x1770
 usb_generic_driver_probe+0x69/0x90
 usb_probe_device+0x9c/0x220
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 bus_for_each_drv+0x123/0x1a0
 __device_attach+0x207/0x330
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 usb_new_device.cold+0x463/0xf66
 hub_event+0x10d5/0x3330
 process_one_work+0x873/0x13e0
 worker_thread+0x8b/0xd10
 kthread+0x379/0x450
 ret_from_fork+0x1f/0x30

The buggy address belongs to the object at ffff888115f24000
 which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1536 bytes inside of
 2048-byte region [ffff888115f24000, ffff888115f24800)

Memory state around the buggy address:
 ffff888115f24500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff888115f24580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888115f24600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                   ^
 ffff888115f24680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff888115f24700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================

Crash Report from brcmf_enable_bw40_2g():
==================================================================
BUG: KASAN: slab-out-of-bounds in brcmf_cfg80211_attach+0x3d11/0x3fd0
Read of size 4 at addr ffff888103787600 by task kworker/0:2/1896

CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G        W  O      5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
 dump_stack_lvl+0x57/0x7d
 print_address_description.constprop.0.cold+0x93/0x334
 kasan_report.cold+0x83/0xdf
 brcmf_cfg80211_attach+0x3d11/0x3fd0
 brcmf_attach+0x389/0xd40
 brcmf_usb_probe+0x12de/0x1690
 usb_probe_interface+0x25f/0x710
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 bus_for_each_drv+0x123/0x1a0
 __device_attach+0x207/0x330
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 usb_set_configuration+0x984/0x1770
 usb_generic_driver_probe+0x69/0x90
 usb_probe_device+0x9c/0x220
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 bus_for_each_drv+0x123/0x1a0
 __device_attach+0x207/0x330
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 usb_new_device.cold+0x463/0xf66
 hub_event+0x10d5/0x3330
 process_one_work+0x873/0x13e0
 worker_thread+0x8b/0xd10
 kthread+0x379/0x450
 ret_from_fork+0x1f/0x30

Allocated by task 1896:
 kasan_save_stack+0x1b/0x40
 __kasan_kmalloc+0x7c/0x90
 kmem_cache_alloc_trace+0x19e/0x330
 brcmf_cfg80211_attach+0x3302/0x3fd0
 brcmf_attach+0x389/0xd40
 brcmf_usb_probe+0x12de/0x1690
 usb_probe_interface+0x25f/0x710
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 bus_for_each_drv+0x123/0x1a0
 __device_attach+0x207/0x330
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 usb_set_configuration+0x984/0x1770
 usb_generic_driver_probe+0x69/0x90
 usb_probe_device+0x9c/0x220
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 bus_for_each_drv+0x123/0x1a0
 __device_attach+0x207/0x330
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 usb_new_device.cold+0x463/0xf66
 hub_event+0x10d5/0x3330
 process_one_work+0x873/0x13e0
 worker_thread+0x8b/0xd10
 kthread+0x379/0x450
 ret_from_fork+0x1f/0x30

The buggy address belongs to the object at ffff888103787000
 which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1536 bytes inside of
 2048-byte region [ffff888103787000, ffff888103787800)

Memory state around the buggy address:
 ffff888103787500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff888103787580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888103787600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                   ^
 ffff888103787680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff888103787700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================

Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221116142952.518241-1-linuxlovemin@yonsei.ac.kr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to do sanity check on i_extra_isize in is_alive()

commit d3b7b4afd6b2c344eabf9cc26b8bfa903c164c7c upstream.

syzbot found a f2fs bug:

BUG: KASAN: slab-out-of-bounds in data_blkaddr fs/f2fs/f2fs.h:2891 [inline]
BUG: KASAN: slab-out-of-bounds in is_alive fs/f2fs/gc.c:1117 [inline]
BUG: KASAN: slab-out-of-bounds in gc_data_segment fs/f2fs/gc.c:1520 [inline]
BUG: KASAN: slab-out-of-bounds in do_garbage_collect+0x386a/0x3df0 fs/f2fs/gc.c:1734
Read of size 4 at addr ffff888076557568 by task kworker/u4:3/52

CPU: 1 PID: 52 Comm: kworker/u4:3 Not tainted 6.1.0-rc4-syzkaller-00362-gfef7fd48922d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: writeback wb_workfn (flush-7:0)
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x15e/0x45d mm/kasan/report.c:395
kasan_report+0xbb/0x1f0 mm/kasan/report.c:495
data_blkaddr fs/f2fs/f2fs.h:2891 [inline]
is_alive fs/f2fs/gc.c:1117 [inline]
gc_data_segment fs/f2fs/gc.c:1520 [inline]
do_garbage_collect+0x386a/0x3df0 fs/f2fs/gc.c:1734
f2fs_gc+0x88c/0x20a0 fs/f2fs/gc.c:1831
f2fs_balance_fs+0x544/0x6b0 fs/f2fs/segment.c:410
f2fs_write_inode+0x57e/0xe20 fs/f2fs/inode.c:753
write_inode fs/fs-writeback.c:1440 [inline]
__writeback_single_inode+0xcfc/0x1440 fs/fs-writeback.c:1652
writeback_sb_inodes+0x54d/0xf90 fs/fs-writeback.c:1870
wb_writeback+0x2c5/0xd70 fs/fs-writeback.c:2044
wb_do_writeback fs/fs-writeback.c:2187 [inline]
wb_workfn+0x2dc/0x12f0 fs/fs-writeback.c:2227
process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e4/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306

The root cause is that we forgot to do sanity check on .i_extra_isize
in below path, result in accessing invalid address later, fix it.
- gc_data_segment
 - is_alive
  - data_blkaddr
   - offset_in_addr

Reported-by: syzbot+f8f3dfa4abc489e768a1@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-f2fs-devel/0000000000003cb3c405ed5c17f9@google.com/T/#u
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: smscufx: fix error handling code in ufx_usb_probe

commit b76449ee75e21acfe9fa4c653d8598f191ed7d68 upstream.

The current error handling code in ufx_usb_probe have many unmatching
issues, e.g., missing ufx_free_usb_list, destroy_modedb label should
only include framebuffer_release, fb_dealloc_cmap only matches
fb_alloc_cmap.

My local syzkaller reports a memory leak bug:

memory leak in ufx_usb_probe

BUG: memory leak
unreferenced object 0xffff88802f879580 (size 128):
  comm "kworker/0:7", pid 17416, jiffies 4295067474 (age 46.710s)
  hex dump (first 32 bytes):
    80 21 7c 2e 80 88 ff ff 18 d0 d0 0c 80 88 ff ff  .!|.............
    00 d0 d0 0c 80 88 ff ff e0 ff ff ff 0f 00 00 00  ................
  backtrace:
    [<ffffffff814c99a0>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1045
    [<ffffffff824d219c>] kmalloc include/linux/slab.h:553 [inline]
    [<ffffffff824d219c>] kzalloc include/linux/slab.h:689 [inline]
    [<ffffffff824d219c>] ufx_alloc_urb_list drivers/video/fbdev/smscufx.c:1873 [inline]
    [<ffffffff824d219c>] ufx_usb_probe+0x11c/0x15a0 drivers/video/fbdev/smscufx.c:1655
    [<ffffffff82d17927>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<ffffffff82712f0d>] call_driver_probe drivers/base/dd.c:560 [inline]
    [<ffffffff82712f0d>] really_probe+0x12d/0x390 drivers/base/dd.c:639
    [<ffffffff8271322f>] __driver_probe_device+0xbf/0x140 drivers/base/dd.c:778
    [<ffffffff827132da>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:808
    [<ffffffff82713c27>] __device_attach_driver+0xf7/0x150 drivers/base/dd.c:936
    [<ffffffff82710137>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
    [<ffffffff827136b5>] __device_attach+0x105/0x2d0 drivers/base/dd.c:1008
    [<ffffffff82711d36>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487
    [<ffffffff8270e242>] device_add+0x642/0xdc0 drivers/base/core.c:3517
    [<ffffffff82d14d5f>] usb_set_configuration+0x8ef/0xb80 drivers/usb/core/message.c:2170
    [<ffffffff82d2576c>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
    [<ffffffff82d16ffc>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
    [<ffffffff82712f0d>] call_driver_probe drivers/base/dd.c:560 [inline]
    [<ffffffff82712f0d>] really_probe+0x12d/0x390 drivers/base/dd.c:639
    [<ffffffff8271322f>] __driver_probe_device+0xbf/0x140 drivers/base/dd.c:778

Fix this bug by rewriting the error handling code in ufx_usb_probe.

Reported-by: syzkaller <syzkaller@googlegroups.com>
Tested-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: initialize locks earlier in f2fs_fill_super()

commit 92b4cf5b48955a4bdd15fe4e2067db8ebd87f04c upstream.

syzbot is reporting lockdep warning at f2fs_handle_error() [1], for
spin_lock(&sbi->error_lock) is called before spin_lock_init() is called.
For safe locking in error handling, move initialization of locks (and
obvious structures) in f2fs_fill_super() to immediately after memory
allocation.

Link: https://syzkaller.appspot.com/bug?extid=40642be9b7e0bb28e0df
Reported-by: syzbot <syzbot+40642be9b7e0bb28e0df@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+40642be9b7e0bb28e0df@syzkaller.appspotmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: Use "buf" flexible array for memcpy() destination

commit cf8aa9bf97cadf85745506c6a3e244b22c268d63 upstream.

The "buf" flexible array needs to be the memcpy() destination to avoid
false positive run-time warning from the recent FORTIFY_SOURCE
hardening:

  memcpy: detected field-spanning write (size 93) of single field "&fh->fb"
  at fs/overlayfs/export.c:799 (size 21)

Reported-by: syzbot+9d14351a171d0d1c7955@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/000000000000763a6c05e95a5985@google.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: Validate attribute data and valid sizes

commit 019d22eb0eb707fc099e6e8fad9b3933236a06d0 upstream.

The data_size and valid_size fields of non resident attributes should be
less than the its alloc_size field, but this is not checked in
ntfs_read_mft function.

Syzbot reports a allocation order warning due to a large unchecked value
of data_size getting assigned to inode->i_size which is then passed to
kcalloc.

Add sanity check for ensuring that the data_size and valid_size fields
are not larger than alloc_size field.

Link: https://syzkaller.appspot.com/bug?extid=fa4648a5446460b7b963
Reported-and-tested-by: syzbot+fa4648a5446460b7b963@syzkaller.appspotmail.com
Fixes: (82cae269cfa95) fs/ntfs3: Add initialization of super block
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/imc-pmu: Revert nest_init_lock to being a mutex

commit ad53db4acb415976761d7302f5b02e97f2bd097e upstream.

The recent commit 76d588dddc45 ("powerpc/imc-pmu: Fix use of mutex in
IRQs disabled section") fixed warnings (and possible deadlocks) in the
IMC PMU driver by converting the locking to use spinlocks.

It also converted the init-time nest_init_lock to a spinlock, even
though it's not used at runtime in IRQ disabled sections or while
holding other spinlocks.

This leads to warnings such as:

  BUG: sleeping function called from invalid context at include/linux/percpu-rwsem.h:49
  in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
  preempt_count: 1, expected: 0
  CPU: 7 PID: 1 Comm: swapper/0 Not tainted 6.2.0-rc2-14719-gf12cd06109f4-dirty #1
  Hardware name: Mambo,Simulated-System POWER9 0x4e1203 opal:v6.6.6 PowerNV
  Call Trace:
    dump_stack_lvl+0x74/0xa8 (unreliable)
    __might_resched+0x178/0x1a0
    __cpuhp_setup_state+0x64/0x1e0
    init_imc_pmu+0xe48/0x1250
    opal_imc_counters_probe+0x30c/0x6a0
    platform_probe+0x78/0x110
    really_probe+0x104/0x420
    __driver_probe_device+0xb0/0x170
    driver_probe_device+0x58/0x180
    __driver_attach+0xd8/0x250
    bus_for_each_dev+0xb4/0x140
    driver_attach+0x34/0x50
    bus_add_driver+0x1e8/0x2d0
    driver_register+0xb4/0x1c0
    __platform_driver_register+0x38/0x50
    opal_imc_driver_init+0x2c/0x40
    do_one_initcall+0x80/0x360
    kernel_init_freeable+0x310/0x3b8
    kernel_init+0x30/0x1a0
    ret_from_kernel_thread+0x5c/0x64

Fix it by converting nest_init_lock back to a mutex, so that we can call
sleeping functions while holding it. There is no interaction between
nest_init_lock and the runtime spinlocks used by the actual PMU routines.

Fixes: 76d588dddc45 ("powerpc/imc-pmu: Fix use of mutex in IRQs disabled section")
Tested-by: Kajol Jain<kjain@linux.ibm.com>
Reviewed-by: Kajol Jain<kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230130014401.540543-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64s: Fix local irq disable when PMIs are disabled

commit bc88ef663265676419555df2dc469a471c0add31 upstream.

When PMI interrupts are soft-masked, local_irq_save() will clear the PMI
mask bit, allowing PMIs in and causing a race condition. This causes a
deadlock in native_hpte_insert via hash_preload, which depends on PMIs
being disabled since commit 8b91cee5eadd ("powerpc/64s/hash: Make hash
faults work in NMI context"). native_hpte_insert calls local_irq_save().
It's possible the lpar hash code is also affected when tracing is
enabled because __trace_hcall_entry() calls local_irq_save().

Fix this by making arch_local_irq_save() _or_ the IRQS_DISABLED bit into
the mask.

This was found with the stress_hpt option with a kbuild workload running
together with `perf record -g`.

Fixes: f442d004806e ("powerpc/64s: Add support to mask perf interrupts and replay them")
Fixes: 8b91cee5eadd ("powerpc/64s/hash: Make hash faults work in NMI context")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Just take the fix without the new warning]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230121095352.2823517-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64s/radix: Fix crash with unaligned relocated kernel

commit 98d0219e043e09013e883eacde3b93e0b2bf944d upstream.

If a relocatable kernel is loaded at an address that is not 2MB aligned
and told not to relocate to zero, the kernel can crash due to
mark_rodata_ro() incorrectly changing some read-write data to read-only.

Scenarios where the misalignment can occur are when the kernel is
loaded by kdump or using the RELOCATABLE_TEST config option.

Example crash with the kernel loaded at 5MB:

  Run /sbin/init as init process
  BUG: Unable to handle kernel data access on write at 0xc000000000452000
  Faulting instruction address: 0xc0000000005b6730
  Oops: Kernel access of bad area, sig: 11 [#1]
  LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
  CPU: 1 PID: 1 Comm: init Not tainted 6.2.0-rc1-00011-g349188be4841 #166
  Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,git-5b4c5a hv:linux,kvm pSeries
  NIP:  c0000000005b6730 LR: c000000000ae9ab8 CTR: 0000000000000380
  REGS: c000000004503250 TRAP: 0300   Not tainted  (6.2.0-rc1-00011-g349188be4841)
  MSR:  8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 44288480  XER: 00000000
  CFAR: c0000000005b66ec DAR: c000000000452000 DSISR: 0a000000 IRQMASK: 0
  ...
  NIP memset+0x68/0x104
  LR  zero_user_segments.constprop.0+0xa8/0xf0
  Call Trace:
    ext4_mpage_readpages+0x7f8/0x830
    ext4_readahead+0x48/0x60
    read_pages+0xb8/0x380
    page_cache_ra_unbounded+0x19c/0x250
    filemap_fault+0x58c/0xae0
    __do_fault+0x60/0x100
    __handle_mm_fault+0x1230/0x1a40
    handle_mm_fault+0x120/0x300
    ___do_page_fault+0x20c/0xa80
    do_page_fault+0x30/0xc0
    data_access_common_virt+0x210/0x220

This happens because mark_rodata_ro() tries to change permissions on the
range _stext..__end_rodata, but _stext sits in the middle of the 2MB
page from 4MB to 6MB:

  radix-mmu: Mapped 0x0000000000000000-0x0000000000200000 with 2.00 MiB pages (exec)
  radix-mmu: Mapped 0x0000000000200000-0x0000000000400000 with 2.00 MiB pages
  radix-mmu: Mapped 0x0000000000400000-0x0000000002400000 with 2.00 MiB pages (exec)

The logic that changes the permissions assumes the linear mapping was
split correctly at boot, so it marks the entire 2MB page read-only. That
leads to the write fault above.

To fix it, the boot time mapping logic needs to consider that if the
kernel is running at a non-zero address then _stext is a boundary where
it must split the mapping.

That leads to the mapping being split correctly, allowing the rodata
permission change to take happen correctly, with no spillover:

  radix-mmu: Mapped 0x0000000000000000-0x0000000000200000 with 2.00 MiB pages (exec)
  radix-mmu: Mapped 0x0000000000200000-0x0000000000400000 with 2.00 MiB pages
  radix-mmu: Mapped 0x0000000000400000-0x0000000000500000 with 64.0 KiB pages
  radix-mmu: Mapped 0x0000000000500000-0x0000000000600000 with 64.0 KiB pages (exec)
  radix-mmu: Mapped 0x0000000000600000-0x0000000002400000 with 2.00 MiB pages (exec)

If the kernel is loaded at a 2MB aligned address, the mapping continues
to use 2MB pages as before:

  radix-mmu: Mapped 0x0000000000000000-0x0000000000200000 with 2.00 MiB pages (exec)
  radix-mmu: Mapped 0x0000000000200000-0x0000000000400000 with 2.00 MiB pages
  radix-mmu: Mapped 0x0000000000400000-0x0000000002c00000 with 2.00 MiB pages (exec)
  radix-mmu: Mapped 0x0000000002c00000-0x0000000100000000 with 2.00 MiB pages

Fixes: c55d7b5e6426 ("powerpc: Remove STRICT_KERNEL_RWX incompatibility with RELOCATABLE")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230110124753.1325426-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:adc:twl6030: Enable measurement of VAC

commit bffb7d9d1a3dbd09e083b88aefd093b3b10abbfb upstream.

VAC needs to be wired up to produce proper measurements,
without this change only near zero values are reported.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Fixes: 1696f36482e7 ("iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20221217221305.671117-1-andreas@kemnade.info
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: SOF: sof-audio: prepare_widgets: Check swidget for NULL on sink failure

commit fb4293600cc651cfe4d48ec489f1d175adf6e2f8 upstream.

If the swidget is NULL we skip the preparing of the widget and jump to
handle the sink path of the widget.
If the prepare fails in this case we would undo the prepare but the swidget
is NULL (we skipped the prepare for the widget).

To avoid NULL pointer dereference in this case we must check swidget
against NULL pointer once again.

Fixes: 0ad84b11f2f8 ("ASoC: SOF: sof-audio: skip prepare/unprepare if swidget is NULL")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230120102125.30653-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86/amd: pmc: add CONFIG_SERIO dependency

commit abce209d18fd26e865b2406cc68819289db973f9 upstream.

Using the serio subsystem now requires the code to be reachable:

x86_64-linux-ld: drivers/platform/x86/amd/pmc.o: in function `amd_pmc_suspend_handler':
pmc.c:(.text+0x86c): undefined reference to `serio_bus'

Add the usual dependency: as other users of serio use 'select'
rather than 'depends on', use the same here.

Fixes: 8e60615e8932 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230127093950.2368575-1-arnd@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_dma: Fix DMA Rx rearm race

commit 57e9af7831dcf211c5c689c2a6f209f4abdf0bce upstream.

As DMA Rx can be completed from two places, it is possible that DMA Rx
completes before DMA completion callback had a chance to complete it.
Once the previous DMA Rx has been completed, a new one can be started
on the next UART interrupt. The following race is possible
(uart_unlock_and_check_sysrq_irqrestore() replaced with
spin_unlock_irqrestore() for simplicity/clarity):

CPU0 CPU1
dma_rx_complete()
serial8250_handle_irq()
  spin_lock_irqsave(&port->lock)
  handle_rx_dma()
    serial8250_rx_dma_flush()
      __dma_rx_complete()
        dma->rx_running = 0
        // Complete DMA Rx
  spin_unlock_irqrestore(&port->lock)

serial8250_handle_irq()
  spin_lock_irqsave(&port->lock)
  handle_rx_dma()
    serial8250_rx_dma()
      dma->rx_running = 1
      // Setup a new DMA Rx
  spin_unlock_irqrestore(&port->lock)

  spin_lock_irqsave(&port->lock)
  // sees dma->rx_running = 1
  __dma_rx_complete()
    dma->rx_running = 0
    // Incorrectly complete
    // running DMA Rx

This race seems somewhat theoretical to occur for real but handle it
correctly regardless. Check what is the DMA status before complething
anything in __dma_rx_complete().

Reported-by: Gilles BULOZ <gilles.buloz@kontron.com>
Tested-by: Gilles BULOZ <gilles.buloz@kontron.com>
Fixes: 9ee4b83e51f7 ("serial: 8250: Add support for dmaengine")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230130114841.25749-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_dma: Fix DMA Rx completion race

commit 31352811e13dc2313f101b890fd4b1ce760b5fe7 upstream.

__dma_rx_complete() is called from two places:
  - Through the DMA completion callback dma_rx_complete()
  - From serial8250_rx_dma_flush() after IIR_RLSI or IIR_RX_TIMEOUT
The former does not hold port's lock during __dma_rx_complete() which
allows these two to race and potentially insert the same data twice.

Extend port's lock coverage in dma_rx_complete() to prevent the race
and check if the DMA Rx is still pending completion before calling
into __dma_rx_complete().

Reported-by: Gilles BULOZ <gilles.buloz@kontron.com>
Tested-by: Gilles BULOZ <gilles.buloz@kontron.com>
Fixes: 9ee4b83e51f7 ("serial: 8250: Add support for dmaengine")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230130114841.25749-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: qcom-qmp-combo: fix runtime suspend

commit c7b98de745cffdceefc077ad5cf9cda032ef8959 upstream.

Drop the confused runtime-suspend type check which effectively broke
runtime PM if the DP child node happens to be parsed before the USB
child node during probe (e.g. due to order of child nodes in the
devicetree).

Instead use the new driver data USB PHY pointer to access the USB
configuration and resources.

Fixes: 52e013d0bffa ("phy: qcom-qmp: Add support for DP in USB3+DP combo phy")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221114081346.5116-6-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: core: fix return value

commit 0c4862b1c1465e473bc961a02765490578bf5c20 upstream.

Dan Carpenter points out that the return code was not set in commit
60c8b4aebd8e ("nvmem: core: fix cleanup after dev_set_name()"), but
this is not the only issue - we also need to zero wp_gpio to prevent
gpiod_put() being called on an error value.

Fixes: 560181d3ace6 ("nvmem: core: fix cleanup after dev_set_name()")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-10-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: core: fix cell removal on error

commit db3546d58b5a0fa581d9c9f2bdc2856fa6c5e43e upstream.

nvmem_add_cells() could return an error after some cells are already
added to the provider. In this case, the added cells are not removed.
Remove any registered cells if nvmem_add_cells() fails.

Fixes: fa72d847d68d7 ("nvmem: check the return value of nvmem_add_cells()")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-9-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: core: fix device node refcounting

commit edcf2fb660526b5ed29f93bd17328a2b4835c8b2 upstream.

In of_nvmem_cell_get(), of_get_next_parent() is used on cell_np. This
will decrement the refcount on cell_np, but cell_np is still used later
in the code. Use of_get_parent() instead and of_node_put() in the
appropriate places.

Fixes: 69aba7948cbe ("nvmem: Add a simple NVMEM framework for consumers")
Fixes: 7ae6478b304b ("nvmem: core: rework nvmem cell instance creation")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-8-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: core: fix registration vs use race

commit ab3428cfd9aa2f3463ee4b2909b5bb2193bd0c4a upstream.

The i.MX6 CPU frequency driver sometimes fails to register at boot time
due to nvmem_cell_read_u32() sporadically returning -ENOENT.

This happens because there is a window where __nvmem_device_get() in
of_nvmem_cell_get() is able to return the nvmem device, but as cells
have been setup, nvmem_find_cell_entry_by_node() returns NULL.

The occurs because the nvmem core registration code violates one of the
fundamental principles of kernel programming: do not publish data
structures before their setup is complete.

Fix this by making nvmem core code conform with this principle.

Fixes: eace75cfdcf7 ("nvmem: Add a simple NVMEM framework for nvmem providers")
Cc: stable@vger.kernel.org
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: core: fix cleanup after dev_set_name()

commit 560181d3ace61825f4ca9dd3481d6c0ee6709fa8 upstream.

If dev_set_name() fails, we leak nvmem->wp_gpio as the cleanup does not
put this. While a minimal fix for this would be to add the gpiod_put()
call, we can do better if we split device_register(), and use the
tested nvmem_release() cleanup code by initialising the device early,
and putting the device.

This results in a slightly larger fix, but results in clear code.

Note: this patch depends on "nvmem: core: initialise nvmem->id early"
and "nvmem: core: remove nvmem_config wp_gpio".

Fixes: 5544e90c8126 ("nvmem: core: add error handling for dev_set_name")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[Srini: Fixed subject line and error code handing with wp_gpio while applying.]
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: core: remove nvmem_config wp_gpio

commit 569653f022a29a1a44ea9de5308b657228303fa5 upstream.

No one provides wp_gpio, so let's remove it to avoid issues with
the nvmem core putting this gpio.

Cc: stable@vger.kernel.org
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: core: initialise nvmem->id early

commit 3bd747c7ea13cb145f0d84444e00df928b0842d9 upstream.

The error path for wp_gpio attempts to free the IDA nvmem->id, but
this has yet to be assigned, so will always be zero - leaking the
ID allocated by ida_alloc(). Fix this by moving the initialisation
of nvmem->id earlier.

Fixes: f7d8d7dcd978 ("nvmem: fix memory leak in error path")
Cc: stable@vger.kernel.org
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: update wave data type to 3 for gfx11

commit ed8e793c65e4c6633e8577e40d574da8a56d2e0f upstream.

SQ_WAVE_INST_DW0 isn't present on gfx11 compared to gfx10, so update
wave data type to signify a difference.

Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Mukul Joshi <Mukul.Joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: drop unneeded dpm features disablement for SMU 13.0.4/11

commit 1538709c9f1c207d30afd95ea41b3aeb973f67e7 upstream.

PMFW will handle the features disablement properly for gpu reset case,
driver involvement may cause some unexpected issues.

Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd: Fix initialization for nbio 4.3.0

commit 5048fa1ebf89d03cf0ceca13fab8f800399e9ee3 upstream.

A mistake has been made on some boards with NBIO 4.3.0 where some
NBIO registers aren't properly set by the hardware.

Ensure that they're set during initialization.

Cc: Natikar Basavaraj <Basavaraj.Natikar@amd.com>
Tested-by: Satyanarayana ReddyTVN <Satyanarayana.ReddyTVN@amd.com>
Tested-by: Rutvij Gajjar <Rutvij.Gajjar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix potential bit_17 double-free

commit 7057a8f126f14f14b040faecfa220fd27c6c2f85 upstream.

A userspace with multiple threads racing I915_GEM_SET_TILING to set the
tiling to I915_TILING_NONE could trigger a double free of the bit_17
bitmask.  (Or conversely leak memory on the transition to tiled.)  Move
allocation/free'ing of the bitmask within the section protected by the
obj lock.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Cc: <stable@vger.kernel.org> # v5.5+
[tursulin: Correct fixes tag and added cc stable.]
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127200550.3531984-1-robdclark@gmail.com
(cherry picked from commit 10e0cbaaf1104f449d695c80bcacf930dcd3c42e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Avoid potential vm use-after-free

commit 41d419382ec7e257e54b7b6ff0d3623aafb1316d upstream.

Adding the vm to the vm_xa table makes it visible to userspace, which
could try to race with us to close the vm.  So we need to take our extra
reference before putting it in the table.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Fixes: 9ec8795e7d91 ("drm/i915: Drop __rcu from gem_context->vm")
Cc: <stable@vger.kernel.org> # v5.16+
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230119173321.2825472-1-robdclark@gmail.com
(cherry picked from commit 99343c46d4e2b34c285d3d5f68ff04274c2f9fb4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler

commit 3f6c02fa712bd453871877fe1d1969625617471e upstream.

Requesting an interrupt with IRQF_ONESHOT will run the primary handler
in the hard-IRQ context even in the force-threaded mode. The
force-threaded mode is used by PREEMPT_RT in order to avoid acquiring
sleeping locks (spinlock_t) in hard-IRQ context. This combination
makes it impossible and leads to "sleeping while atomic" warnings.

Use one interrupt handler for both handlers (primary and secondary)
and drop the IRQF_ONESHOT flag which is not needed.

Fixes: e359b4411c283 ("serial: stm32: fix threaded interrupt handling")
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Valentin Caron <valentin.caron@foss.st.com> # V3
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230120160332.57930-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf: actually set signaling bit for private stub fences

commit d2ceea0eb6e17bb37d8b85cb4c16797c0d683d1c upstream.

In dma_fence_allocate_private_stub() set the signaling bit of the newly
allocated private stub fence rather than the signaling bit of the
shared dma_fence_stub.

Cc: <stable@vger.kernel.org> # v6.1
Fixes: c85d00d4fd8b ("dma-buf: set signaling bit for the stub fence")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126002844.339593-1-dakr@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

migrate: hugetlb: check for hugetlb shared PMD in node migration

commit 73bdf65ea74857d7fb2ec3067a3cec0e261b1462 upstream.

migrate_pages/mempolicy semantics state that CAP_SYS_NICE is required to
move pages shared with another process to a different node.  page_mapcount
> 1 is being used to determine if a hugetlb page is shared.  However, a
hugetlb page will have a mapcount of 1 if mapped by multiple processes via
a shared PMD.  As a result, hugetlb pages shared by multiple processes and
mapped with a shared PMD can be moved by a process without CAP_SYS_NICE.

To fix, check for a shared PMD if mapcount is 1.  If a shared PMD is found
consider the page shared.

Link: https://lkml.kernel.org/r/20230126222721.222195-3-mike.kravetz@oracle.com
Fixes: e2d8cf405525 ("migrate: add hugepage migration code to migrate_pages()")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: fix mas_empty_area_rev() lower bound validation

commit 7327e8111adb315423035fb5233533016dfd3f2e upstream.

mas_empty_area_rev() was not correctly validating the start of a gap
against the lower limit.  This could lead to the range starting lower than
the requested minimum.

Fix the issue by better validating a gap once one is found.

This commit also adds tests to the maple tree test suite for this issue
and tests the mas_empty_area() function for similar bound checking.

Link: https://lkml.kernel.org/r/20230111200136.1851322-1-Liam.Howlett@oracle.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216911
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: <amanieu@gmail.com>
Link: https://lore.kernel.org/linux-mm/0b9f5425-08d4-8013-aa4c-e620c3b10bb2@leemhuis.info/
Tested-by: Holger Hoffsttte <holger@applied-asynchrony.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Squashfs: fix handling and sanity checking of xattr_ids count

commit f65c4bbbd682b0877b669828b4e033b8d5d0a2dc upstream.

A Sysbot [1] corrupted filesystem exposes two flaws in the handling and
sanity checking of the xattr_ids count in the filesystem.  Both of these
flaws cause computation overflow due to incorrect typing.

In the corrupted filesystem the xattr_ids value is 4294967071, which
stored in a signed variable becomes the negative number -225.

Flaw 1 (64-bit systems only):

The signed integer xattr_ids variable causes sign extension.

This causes variable overflow in the SQUASHFS_XATTR_*(A) macros.  The
variable is first multiplied by sizeof(struct squashfs_xattr_id) where the
type of the sizeof operator is "unsigned long".

On a 64-bit system this is 64-bits in size, and causes the negative number
to be sign extended and widened to 64-bits and then become unsigned.  This
produces the very large number 18446744073709548016 or 2^64 - 3600.  This
number when rounded up by SQUASHFS_METADATA_SIZE - 1 (8191 bytes) and
divided by SQUASHFS_METADATA_SIZE overflows and produces a length of 0
(stored in len).

Flaw 2 (32-bit systems only):

On a 32-bit system the integer variable is not widened by the unsigned
long type of the sizeof operator (32-bits), and the signedness of the
variable has no effect due it always being treated as unsigned.

The above corrupted xattr_ids value of 4294967071, when multiplied
overflows and produces the number 4294963696 or 2^32 - 3400.  This number
when rounded up by SQUASHFS_METADATA_SIZE - 1 (8191 bytes) and divided by
SQUASHFS_METADATA_SIZE overflows again and produces a length of 0.

The effect of the 0 length computation:

In conjunction with the corrupted xattr_ids field, the filesystem also has
a corrupted xattr_table_start value, where it matches the end of
filesystem value of 850.

This causes the following sanity check code to fail because the
incorrectly computed len of 0 matches the incorrect size of the table
reported by the superblock (0 bytes).

    len = SQUASHFS_XATTR_BLOCK_BYTES(*xattr_ids);
    indexes = SQUASHFS_XATTR_BLOCKS(*xattr_ids);

    /*
     * The computed size of the index table (len bytes) should exactly
     * match the table start and end points
    */
    start = table_start + sizeof(*id_table);
    end = msblk->bytes_used;

    if (len != (end - start))
            return ERR_PTR(-EINVAL);

Changing the xattr_ids variable to be "usigned int" fixes the flaw on a
64-bit system.  This relies on the fact the computation is widened by the
unsigned long type of the sizeof operator.

Casting the variable to u64 in the above macro fixes this flaw on a 32-bit
system.

It also means 64-bit systems do not implicitly rely on the type of the
sizeof operator to widen the computation.

[1] https://lore.kernel.org/lkml/000000000000cd44f005f1a0f17f@google.com/

Link: https://lkml.kernel.org/r/20230127061842.10965-1-phillip@squashfs.org.uk
Fixes: 506220d2ba21 ("squashfs: add more sanity checks in xattr id lookup")
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: <syzbot+082fa4af80a5bb1a9843@syzkaller.appspotmail.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Fedor Pchelkin <pchelkin@ispras.ru>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ia64: fix build error due to switch case label appearing next to declaration

commit 6f28a2613497fc587e347afa99fa2c52230678a7 upstream.

Since commit aa06a9bd8533 ("ia64: fix clock_getres(CLOCK_MONOTONIC) to
report ITC frequency"), gcc 10.1.0 fails to build ia64 with the gnomic:
| ../arch/ia64/kernel/sys_ia64.c: In function 'ia64_clock_getres':
| ../arch/ia64/kernel/sys_ia64.c:189:3: error: a label can only be part of a statement and a declaration is not a statement
|   189 |   s64 tick_ns = DIV_ROUND_UP(NSEC_PER_SEC, local_cpu_data->itc_freq);

This line appears immediately after a case label in a switch.

Move the declarations out of the case, to the top of the function.

Link: https://lkml.kernel.org/r/20230117151632.393836-1-james.morse@arm.com
Fixes: aa06a9bd8533 ("ia64: fix clock_getres(CLOCK_MONOTONIC) to report ITC frequency")
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Sergei Trofimovich <slyich@gmail.com>
Cc: Émeric Maschino <emeric.maschino@gmail.com>
Cc: matoro <matoro_mailinglist_kernel@matoro.tk>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

highmem: round down the address passed to kunmap_flush_on_unmap()

commit 88d7b12068b95731c280af8ce88e8ee9561f96de upstream.

We already round down the address in kunmap_local_indexed() which is the
other implementation of __kunmap_local().  The only implementation of
kunmap_flush_on_unmap() is PA-RISC which is expecting a page-aligned
address.  This may be causing PA-RISC to be flushing the wrong addresses
currently.

Link: https://lkml.kernel.org/r/20230126200727.1680362-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Fixes: 298fa1ad5571 ("highmem: Provide generic variant of kmap_atomic*")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/MADV_COLLAPSE: catch !none !huge !bad pmd lookups

commit edb5d0cf5525357652aff6eacd9850b8ced07143 upstream.

In commit 34488399fa08 ("mm/madvise: add file and shmem support to
MADV_COLLAPSE") we make the following change to find_pmd_or_thp_or_none():

-       if (!pmd_present(pmde))
-               return SCAN_PMD_NULL;
+       if (pmd_none(pmde))
+               return SCAN_PMD_NONE;

This was for-use by MADV_COLLAPSE file/shmem codepaths, where
MADV_COLLAPSE might identify a pte-mapped hugepage, only to have
khugepaged race-in, free the pte table, and clear the pmd.  Such codepaths
include:

A) If we find a suitably-aligned compound page of order HPAGE_PMD_ORDER
   already in the pagecache.
B) In retract_page_tables(), if we fail to grab mmap_lock for the target
   mm/address.

In these cases, collapse_pte_mapped_thp() really does expect a none (not
just !present) pmd, and we want to suitably identify that case separate
from the case where no pmd is found, or it's a bad-pmd (of course, many
things could happen once we drop mmap_lock, and the pmd could plausibly
undergo multiple transitions due to intervening fault, split, etc).
Regardless, the code is prepared install a huge-pmd only when the existing
pmd entry is either a genuine pte-table-mapping-pmd, or the none-pmd.

However, the commit introduces a logical hole; namely, that we've allowed
!none- && !huge- && !bad-pmds to be classified as genuine
pte-table-mapping-pmds.  One such example that could leak through are swap
entries.  The pmd values aren't checked again before use in
pte_offset_map_lock(), which is expecting nothing less than a genuine
pte-table-mapping-pmd.

We want to put back the !pmd_present() check (below the pmd_none() check),
but need to be careful to deal with subtleties in pmd transitions and
treatments by various arch.

The issue is that __split_huge_pmd_locked() temporarily clears the present
bit (or otherwise marks the entry as invalid), but pmd_present() and
pmd_trans_huge() still need to return true while the pmd is in this
transitory state.  For example, x86's pmd_present() also checks the
_PAGE_PSE , riscv's version also checks the _PAGE_LEAF bit, and arm64 also
checks a PMD_PRESENT_INVALID bit.

Covering all 4 cases for x86 (all checks done on the same pmd value):

1) pmd_present() && pmd_trans_huge()
   All we actually know here is that the PSE bit is set. Either:
   a) We aren't racing with __split_huge_page(), and PRESENT or PROTNONE
      is set.
      => huge-pmd
   b) We are currently racing with __split_huge_page().  The danger here
      is that we proceed as-if we have a huge-pmd, but really we are
      looking at a pte-mapping-pmd.  So, what is the risk of this
      danger?

      The only relevant path is:

madvise_collapse() -> collapse_pte_mapped_thp()

      Where we might just incorrectly report back "success", when really
      the memory isn't pmd-backed.  This is fine, since split could
      happen immediately after (actually) successful madvise_collapse().
      So, it should be safe to just assume huge-pmd here.

2) pmd_present() && !pmd_trans_huge()
   Either:
   a) PSE not set and either PRESENT or PROTNONE is.
      => pte-table-mapping pmd (or PROT_NONE)
   b) devmap.  This routine can be called immediately after
      unlocking/locking mmap_lock -- or called with no locks held (see
      khugepaged_scan_mm_slot()), so previous VMA checks have since been
      invalidated.

3) !pmd_present() && pmd_trans_huge()
  Not possible.

4) !pmd_present() && !pmd_trans_huge()
  Neither PRESENT nor PROTNONE set
  => not present

I've checked all archs that implement pmd_trans_huge() (arm64, riscv,
powerpc, longarch, x86, mips, s390) and this logic roughly translates
(though devmap treatment is unique to x86 and powerpc, and (3) doesn't
necessarily hold in general -- but that doesn't matter since
!pmd_present() always takes failure path).

Also, add a comment above find_pmd_or_thp_or_none() to help future
travelers reason about the validity of the code; namely, the possible
mutations that might happen out from under us, depending on how mmap_lock
is held (if at all).

Link: https://lkml.kernel.org/r/20230125225358.2576151-1-zokeefe@google.com
Fixes: 34488399fa08 ("mm/madvise: add file and shmem support to MADV_COLLAPSE")
Signed-off-by: Zach O'Keefe <zokeefe@google.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, mremap: fix mremap() expanding for vma's with vm_ops->close()

commit d014cd7c1c358edc3ea82ebf327a036a42ed0164 upstream.

Fabian has reported another regression in 6.1 due to ca3d76b0aa80 ("mm:
add merging after mremap resize").  The problem is that vma_merge() can
fail when vma has a vm_ops->close() method, causing is_mergeable_vma()
test to be negative.  This was happening for vma mapping a file from
fuse-overlayfs, which does have the method.  But when we are simply
expanding the vma, we never remove it due to the "merge" with the added
area, so the test should not prevent the expansion.

As a quick fix, check for such vmas and expand them using vma_adjust()
directly as was done before commit ca3d76b0aa80.  For a more robust long
term solution we should try to limit the check for vma_ops->close only to
cases that actually result in vma removal, so that no merge would be
prevented unnecessarily.

[akpm@linux-foundation.org: fix indenting whitespace, reflow comment]
Link: https://lkml.kernel.org/r/20230117101939.9753-1-vbabka@suse.cz
Fixes: ca3d76b0aa80 ("mm: add merging after mremap resize")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Fabian Vogt <fvogt@suse.com>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1206359#c35
Tested-by: Fabian Vogt <fvogt@suse.com>
Cc: Jakub Matěna <matenajakub@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/khugepaged: fix ->anon_vma race

commit 023f47a8250c6bdb4aebe744db4bf7f73414028b upstream.

If an ->anon_vma is attached to the VMA, collapse_and_free_pmd() requires
it to be locked.

Page table traversal is allowed under any one of the mmap lock, the
anon_vma lock (if the VMA is associated with an anon_vma), and the
mapping lock (if the VMA is associated with a mapping); and so to be
able to remove page tables, we must hold all three of them.
retract_page_tables() bails out if an ->anon_vma is attached, but does
this check before holding the mmap lock (as the comment above the check
explains).

If we racily merged an existing ->anon_vma (shared with a child
process) from a neighboring VMA, subsequent rmap traversals on pages
belonging to the child will be able to see the page tables that we are
concurrently removing while assuming that nothing else can access them.

Repeat the ->anon_vma check once we hold the mmap lock to ensure that
there really is no concurrent page table access.

Hitting this bug causes a lockdep warning in collapse_and_free_pmd(),
in the line "lockdep_assert_held_write(&vma->anon_vma->root->rwsem)".
It can also lead to use-after-free access.

Link: https://lore.kernel.org/linux-mm/CAG48ez3434wZBKFFbdx4M9j6eUwSUVPd4dxhzW_k_POneSDF+A@mail.gmail.com/
Link: https://lkml.kernel.org/r/20230111133351.807024-1-jannh@google.com
Fixes: f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages")
Signed-off-by: Jann Horn <jannh@google.com>
Reported-by: Zach O'Keefe <zokeefe@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@intel.linux.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/swapfile: add cond_resched() in get_swap_pages()

commit 7717fc1a12f88701573f9ed897cc4f6699c661e3 upstream.

The softlockup still occurs in get_swap_pages() under memory pressure.  64
CPU cores, 64GB memory, and 28 zram devices, the disksize of each zram
device is 50MB with same priority as si.  Use the stress-ng tool to
increase memory pressure, causing the system to oom frequently.

The plist_for_each_entry_safe() loops in get_swap_pages() could reach tens
of thousands of times to find available space (extreme case:
cond_resched() is not called in scan_swap_map_slots()).  Let's add
cond_resched() into get_swap_pages() when failed to find available space
to avoid softlockup.

Link: https://lkml.kernel.org/r/20230128094757.1060525-1-xialonglong1@huawei.com
Signed-off-by: Longlong Xia <xialonglong1@huawei.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Chen Wandun <chenwandun@huawei.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/uffd: fix pte marker when fork() without fork event

commit 49d6d7fb631345b0f2957a7c4be24ad63903150f upstream.

Patch series "mm: Fixes on pte markers".

Patch 1 resolves the syzkiller report from Pengfei.

Patch 2 further harden pte markers when used with the recent swapin error
markers.  The major case is we should persist a swapin error marker after
fork(), so child shouldn't read a corrupted page.

This patch (of 2):

When fork(), dst_vma is not guaranteed to have VM_UFFD_WP even if src may
have it and has pte marker installed.  The warning is improper along with
the comment.  The right thing is to inherit the pte marker when needed, or
keep the dst pte empty.

A vague guess is this happened by an accident when there's the prior patch
to introduce src/dst vma into this helper during the uffd-wp feature got
developed and I probably messed up in the rebase, since if we replace
dst_vma with src_vma the warning & comment it all makes sense too.

Hugetlb did exactly the right here (copy_hugetlb_page_range()).  Fix the
general path.

Reproducer:

https://github.com/xupengfe/syzkaller_logs/blob/main/221208_115556_copy_page_range/repro.c

Bugzilla report: https://bugzilla.kernel.org/show_bug.cgi?id=216808

Link: https://lkml.kernel.org/r/20221214200453.1772655-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20221214200453.1772655-2-peterx@redhat.com
Fixes: c56d1b62cce8 ("mm/shmem: handle uffd-wp during fork()")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org> # 5.19+
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fpga: stratix10-soc: Fix return value check in s10_ops_write_init()

commit 65ea840afd508194b0ee903256162aa87e46ec30 upstream.

In case of error, the function stratix10_svc_allocate_memory()
returns ERR_PTR() and never returns NULL. The NULL test in the
return value check should be replaced with IS_ERR().

Fixes: e7eef1d7633a ("fpga: add intel stratix10 soc fpga manager driver")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Russ Weight <russell.h.weight@intel.com>
Cc: stable@vger.kernel.org
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20221126071430.19540-1-zhengyongjun3@huawei.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fpga: m10bmc-sec: Fix probe rollback

commit 60ce26d10e5850f33cc76fce52f5377045e75a15 upstream.

Handle probe error rollbacks properly to avoid leaks.

Fixes: 5cd339b370e2 ("fpga: m10bmc-sec: add max10 secure update functions")
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Russ Weight <russell.h.weight@intel.com>
Reviewed-by: Marco Pagani <marpagan@redhat.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: stable@vger.kernel.org
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20221214144952.8392-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/debug: Fix stack recursion caused by wrongly ordered DR7 accesses

commit 9d2c7203ffdb846399b82b0660563c89e918c751 upstream.

In kernels compiled with CONFIG_PARAVIRT=n, the compiler re-orders the
DR7 read in exc_nmi() to happen before the call to sev_es_ist_enter().

This is problematic when running as an SEV-ES guest because in this
environment the DR7 read might cause a #VC exception, and taking #VC
exceptions is not safe in exc_nmi() before sev_es_ist_enter() has run.

The result is stack recursion if the NMI was caused on the #VC IST
stack, because a subsequent #VC exception in the NMI handler will
overwrite the stack frame of the interrupted #VC handler.

As there are no compiler barriers affecting the ordering of DR7
reads/writes, make the accesses to this register volatile, forbidding
the compiler to re-order them.

  [ bp: Massage text, make them volatile too, to make sure some
  aggressive compiler optimization pass doesn't discard them. ]

Fixes: 315562c9af3d ("x86/sev-es: Adjust #VC IST Stack on entering NMI handler")
Reported-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230127035616.508966-1-aik@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HV: hv_balloon: fix memory leak with using debugfs_lookup()

commit 6dfb0771429a63db8561d44147f2bb76f93e1c86 upstream.

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.

Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Fixes: d180e0a1be6c ("Drivers: hv: Create debugfs file with hyper-v balloon usage information")
Cc: stable <stable@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230202140918.2289522-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup()

commit d83d7ed260283560700d4034a80baad46620481b upstream.

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable <stable@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230202151554.2310273-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: udc: do not clear gadget driver.bus

commit 30d09b3131f5b1b9d54ad9b7ee171a45e21362b3 upstream.

Before the commit fc274c1e9973 ("USB: gadget: Add a new bus for gadgets")
gadget driver.bus was unused. For whatever reason, many UDC drivers set
this field explicitly to NULL in udc_start(). With the newly added gadget
bus, doing this will crash the driver during the attach.

The problem was first reported, fixed and tested with OMAP UDC and g_ether.
Other drivers are changed based on code analysis only.

Fixes: fc274c1e9973 ("USB: gadget: Add a new bus for gadgets")
Cc: stable <stable@kernel.org>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230201220125.GD2415@darkstar.musicnaut.iki.fi
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: ucsi: Don't attempt to resume the ports before they exist

commit f82060da749c611ed427523b6d1605d87338aac1 upstream.

This will fix null pointer dereference that was caused by
the driver attempting to resume ports that were not yet
registered.

Fixes: e0dced9c7d47 ("usb: typec: ucsi: Resume in separate work")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216697
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230131141518.78215-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_uac2: Fix incorrect increment of bNumEndpoints

commit 2fa89458af9993fab8054daf827f38881e2ad473 upstream.

Currently connect/disconnect of USB cable calls afunc_bind and
eventually increments the bNumEndpoints. Performing multiple
plugin/plugout will increment bNumEndpoints incorrectly, and on
the next plug-in it leads to invalid configuration of descriptor
and hence enumeration fails.

Fix this by resetting the value of bNumEndpoints to 1 on every
afunc_bind call.

Fixes: 40c73b30546e ("usb: gadget: f_uac2: add adaptive sync support for capture")
Cc: stable <stable@kernel.org>
Signed-off-by: Pratham Pratap <quic_ppratap@quicinc.com>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/1674631645-28888-1-git-send-email-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: memcg: fix NULL pointer in mem_cgroup_track_foreign_dirty_slowpath()

commit ac86f547ca1002aec2ef66b9e64d03f45bbbfbb9 upstream.

As commit 18365225f044 ("hwpoison, memcg: forcibly uncharge LRU pages"),
hwpoison will forcibly uncharg a LRU hwpoisoned page, the folio_memcg
could be NULl, then, mem_cgroup_track_foreign_dirty_slowpath() could
occurs a NULL pointer dereference, let's do not record the foreign
writebacks for folio memcg is null in mem_cgroup_track_foreign_dirty() to
fix it.

Link: https://lkml.kernel.org/r/20230129040945.180629-1-wangkefeng.wang@huawei.com
Fixes: 97b27821b485 ("writeback, memcg: Implement foreign dirty flushing")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reported-by: Ma Wupeng <mawupeng1@huawei.com>
Tested-by: Miko Larsson <mikoxyzzz@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Ma Wupeng <mawupeng1@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hugetlb: proc: check for hugetlb shared PMD in /proc/PID/smaps

commit 3489dbb696d25602aea8c3e669a6d43b76bd5358 upstream.

Patch series "Fixes for hugetlb mapcount at most 1 for shared PMDs".

This issue of mapcount in hugetlb pages referenced by shared PMDs was
discussed in [1].  The following two patches address user visible behavior
caused by this issue.

[1] https://lore.kernel.org/linux-mm/Y9BF+OCdWnCSilEu@monkey/

This patch (of 2):

A hugetlb page will have a mapcount of 1 if mapped by multiple processes
via a shared PMD.  This is because only the first process increases the
map count, and subsequent processes just add the shared PMD page to their
page table.

page_mapcount is being used to decide if a hugetlb page is shared or
private in /proc/PID/smaps.  Pages referenced via a shared PMD were
incorrectly being counted as private.

To fix, check for a shared PMD if mapcount is 1.  If a shared PMD is found
count the hugetlb page as shared.  A new helper to check for a shared PMD
is added.

[akpm@linux-foundation.org: simplification, per David]
[akpm@linux-foundation.org: hugetlb.h: include page_ref.h for page_count()]
Link: https://lkml.kernel.org/r/20230126222721.222195-2-mike.kravetz@oracle.com
Fixes: 25ee01a2fca0 ("mm: hugetlb: proc: add hugetlb-related fields to /proc/PID/smaps")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: multi-gen LRU: fix crash during cgroup migration

commit de08eaa6156405f2e9369f06ba5afae0e4ab3b62 upstream.

lru_gen_migrate_mm() assumes lru_gen_add_mm() runs prior to itself.  This
isn't true for the following scenario:

    CPU 1                         CPU 2

  clone()
    cgroup_can_fork()
                                cgroup_procs_write()
    cgroup_post_fork()
                                  task_lock()
                                  lru_gen_migrate_mm()
                                  task_unlock()
    task_lock()
    lru_gen_add_mm()
    task_unlock()

And when the above happens, kernel crashes because of linked list
corruption (mm_struct->lru_gen.list).

Link: https://lore.kernel.org/r/20230115134651.30028-1-msizanoen@qtmlabs.xyz/
Link: https://lkml.kernel.org/r/20230116034405.2960276-1-yuzhao@google.com
Fixes: bd74fdaea146 ("mm: multi-gen LRU: support page table walks")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: msizanoen <msizanoen@qtmlabs.xyz>
Tested-by: msizanoen <msizanoen@qtmlabs.xyz>
Cc: <stable@vger.kernel.org> [6.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "mm: kmemleak: alloc gray object for reserved region with direct map"

commit 8ef852f1cb426a5812aee700d3b4297aaa426acc upstream.

This reverts commit 972fa3a7c17c9d60212e32ecc0205dc585b1e769.

Kmemleak operates by periodically scanning memory regions for pointers to
allocated memory blocks to determine if they are leaked or not.  However,
reserved memory regions can be used for DMA transactions between a device
and a CPU, and thus, wouldn't contain pointers to allocated memory blocks,
making them inappropriate for kmemleak to scan.  Thus, revert this commit.

Link: https://lkml.kernel.org/r/20230124230254.295589-1-isaacmanjarres@google.com
Fixes: 972fa3a7c17c9 ("mm: kmemleak: alloc gray object for reserved region with direct map")
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Calvin Zhang <calvinzhang.cool@gmail.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: <stable@vger.kernel.org> [5.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: disable generation of unwind tables

commit 2f394c0e7d1129a35156e492bc8f445fb20f43ac upstream.

GCC 13 will enable -fasynchronous-unwind-tables by default on riscv.  In
the kernel, we don't have any use for unwind tables yet, so disable them.
More importantly, the .eh_frame section brings relocations
(R_RISC_32_PCREL, R_RISCV_SET{6,8,16}, R_RISCV_SUB{6,8,16}) into modules
that we are not prepared to handle.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Link: https://lore.kernel.org/r/mvmzg9xybqu.fsf@suse.de
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Wire up PTRACE_GETREGS/PTRACE_SETREGS for compat case

commit 316f1f42b5cc1d95124c1f0387c867c1ba7b6d0e upstream.

Wire up the missing ptrace requests PTRACE_GETREGS, PTRACE_SETREGS,
PTRACE_GETFPREGS and PTRACE_SETFPREGS when running 32-bit applications
on 64-bit kernels.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Replace hardcoded value with PRIV_USER constant in ptrace.c

commit 3f0c17809a098d3f0c1ec83f1fb3ca61638d3dcd upstream.

Prefer usage of the PRIV_USER constant over the hard-coded value to set
the lowest 2 bits for the userspace privilege.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 5.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix return code of pdc_iodc_print()

commit 5d1335dabb3c493a3d6d5b233953b6ac7b6c1ff2 upstream.

There is an off-by-one if the printed string includes a new-line
char.

Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: qcom-spmi-sdam: fix module autoloading

commit 1ca7fca349316231bbaa68d16f819a08d683c5a7 upstream.

Add the missing module device table so that the driver can be autoloaded
when built as a module.

Fixes: 40ce9798794f ("nvmem: add QTI SDAM driver")
Cc: stable@vger.kernel.org # 5.6
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-11-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: sunxi_sid: Always use 32-bit MMIO reads

commit c151d5ed8e8fe0474bd61dce7f2076ca5916c683 upstream.

The SID SRAM on at least some SoCs (A64 and D1) returns different values
when read with bus cycles narrower than 32 bits. This is not immediately
obvious, because memcpy_fromio() uses word-size accesses as long as
enough data is being copied.

The vendor driver always uses 32-bit MMIO reads, so do the same here.
This is faster than the register-based method, which is currently used
as a workaround on A64. And it fixes the values returned on D1, where
the SRAM method was being used.

The special case for the last word is needed to maintain .word_size == 1
for sysfs ABI compatibility, as noted previously in commit de2a3eaea552
("nvmem: sunxi_sid: Optimize register read-out method").

Fixes: 07ae4fde9efa ("nvmem: sunxi_sid: Add support for D1 variant")
Cc: stable@vger.kernel.org
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: brcm_nvram: Add check for kzalloc

commit b0576ade3aaf24b376ea1a4406ae138e2a22b0c0 upstream.

Add the check for the return value of kzalloc in order to avoid
NULL pointer dereference.

Fixes: 6e977eaa8280 ("nvmem: brcm_nvram: parse NVRAM content into NVMEM cells")
Cc: stable@vger.kernel.org
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: fxos8700: fix MAGN sensor scale and unit

commit 2acd031347f645871959a799238a7caf6803aa18 upstream.

+/-1200uT is a MAGN sensor full measurement range. Magnetometer scale
is the magnetic sensitivity parameter. It is referenced as 0.1uT
according to datasheet and magnetometer channel unit is Gauss in
sysfs-bus-iio documentation. Gauss and uTesla unit conversion
relationship as follows: 0.1uT = 0.001Gs.

Set magnetometer scale and available magnetometer scale as fixed 0.001Gs.

Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20230118074227.1665098-5-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN

commit ff5e2cd92ffda9a25ffa2cbdb3a0cf17650172a6 upstream.

FXOS8700_CTRL_ODR_MIN is not used but value is probably wrong.

Remove it for a good readability.

Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20230118074227.1665098-4-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: fxos8700: fix failed initialization ODR mode assignment

commit eb6d8f8705bc19141bac81d8161461f9e256948a upstream.

The absence of correct offset leads a failed initialization ODR mode
assignment.

Select MAX ODR mode as the initialization ODR mode by field mask and
FIELD_PREP.

Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20230118074227.1665098-3-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: fxos8700: fix incorrect ODR mode readback

commit 78ad6864e9e012cdba7c353d044d21ffcfd5f34b upstream.

The absence of a correct offset leads an incorrect ODR mode
readback after use a hexadecimal number to mark the value from
FXOS8700_CTRL_REG1.

Get ODR mode by field mask and FIELD_GET clearly and conveniently.
And attach other additional fix for keeping the original code logic
and a good readability.

Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20230118074227.1665098-2-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: fxos8700: fix swapped ACCEL and MAGN channels readback

commit c68b44bc7d9b1469774a1c985ee71d2cbc5ebef5 upstream.

Because ACCEL and MAGN channels data register base address is
swapped the accelerometer and magnetometer channels readback is
swapped.

Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20221208071911.2405922-3-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: fxos8700: fix map label of channel type to MAGN sensor

commit 429e1e8ec696e0e7a0742904e3dc2f83b7b23dfb upstream.

FXOS8700 is an IMU sensor with ACCEL sensor and MAGN sensor.
Sensor type is indexed by corresponding channel type in a switch.
IIO_ANGL_VEL channel type mapped to MAGN sensor has caused confusion.

Fix the mapping label of "IIO_MAGN" channel type instead of
"IIO_ANGL_VEL" channel type to MAGN sensor.

Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20221208071911.2405922-2-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: fxos8700: fix IMU data bits returned to user space

commit a53f945879c0cb9de3a4c05a665f5157884b5208 upstream.

ACCEL output data registers contain the X-axis, Y-axis, and Z-axis
14-bit left-justified sample data and MAGN output data registers
contain the X-axis, Y-axis, and Z-axis 16-bit sample data. The ACCEL
raw register output data should be divided by 4 before sent to
userspace.

Apply a 2 bits signed right shift to the raw data from ACCEL output
data register but keep that from MAGN sensor as the origin.

Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20221208071911.2405922-5-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: fxos8700: fix incomplete ACCEL and MAGN channels readback

commit 37a94d86d7050665d6d01378b2c916c28e454f10 upstream.

The length of ACCEL and MAGN 3-axis channels output data is 6 byte
individually. However block only read 3 bytes data into buffer from
ACCEL or MAGN output data registers every time. It causes an incomplete
ACCEL and MAGN channels readback.

Set correct value count for regmap_bulk_read to get 6 bytes ACCEL and
MAGN channels readback.

Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20221208071911.2405922-4-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: fxos8700: fix ACCEL measurement range selection

commit 9d61c1820598a5ea474576ed55318a6dadee37ed upstream.

When device is in active mode, it fails to set an ACCEL full-scale
range(2g/4g/8g) in FXOS8700_XYZ_DATA_CFG. This is not align with the
datasheet, but it is a fxos8700 chip behavior.

Keep the device in standby mode before setting ACCEL full-scale range
into FXOS8700_XYZ_DATA_CFG in chip initialization phase and setting
scale phase.

Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://lore.kernel.org/r/20221208071911.2405922-6-carlos.song@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: light: cm32181: Fix PM support on system with 2 I2C resources

commit ee3c5b644a0fdcfed27515a39fb2dd3a016704c1 upstream.

Commit c1e62062ff54 ("iio: light: cm32181: Handle CM3218 ACPI devices
with 2 I2C resources") creates a second client for the actual I2C
address, but the "struct device" passed to PM ops is the first I2C
client that can't talk to the sensor.

That means the I2C transfers in both suspend and resume routines can
fail and blocking the whole suspend process.

Instead of using the first client for I2C transfer, use the I2C client
stored in the cm32181 private struct so the PM ops can get the correct
I2C client to really talk to the sensor device.

Fixes: 68c1b3dd5c48 ("iio: light: cm32181: Add PM support")
BugLink: https://bugs.launchpad.net/bugs/1988346
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2152281
Tested-by: Wahaj <wahajaved@protonmail.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230118170422.339619-1-kai.heng.feng@canonical.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:adc:twl6030: Enable measurements of VUSB, VBAT and others

commit f804bd0dc28683a93a60f271aaefb2fc5b0853dd upstream.

Some inputs need to be wired up to produce proper measurements,
without this change only near zero values are reported.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Fixes: 1696f36482e70 ("iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver")
Link: https://lore.kernel.org/r/20221201181635.3522962-1-andreas@kemnade.info
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imx8qxp-adc: fix irq flood when call imx8qxp_adc_read_raw()

commit 0fc3562a993c3dc41d1177b3983d9300d0db1d4d upstream.

irq flood happen when run
    cat /sys/bus/iio/devices/iio:device0/in_voltage1_raw

imx8qxp_adc_read_raw()
{
...
enable irq
/* adc start */
writel(1, adc->regs + IMX8QXP_ADR_ADC_SWTRIG);
^^^^ trigger irq flood.
wait_for_completion_interruptible_timeout();
readl(adc->regs + IMX8QXP_ADR_ADC_RESFIFO);
^^^^ clear irq here.
...
}

There is only FIFO watermark interrupt at this ADC controller.
IRQ line will be assert until software read data from FIFO.
So IRQ flood happen during wait_for_completion_interruptible_timeout().

Move FIFO read into irq handle to avoid irq flood.

Fixes: 1e23dcaa1a9f ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC")
Cc: stable@vger.kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Cai Huoqing <cai.huoqing@linux.dev>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20221201140110.2653501-1-Frank.Li@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: berlin2-adc: Add missing of_node_put() in error path

commit cbd3a0153cd18a2cbef6bf3cf31bb406c3fc9f55 upstream.

of_get_parent() will return a device_node pointer with refcount
incremented. We need to use of_node_put() on it when done. Add the
missing of_node_put() in the error path of berlin2_adc_probe();

Fixes: 70f1937911ca ("iio: adc: add support for Berlin")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221129020316.191731-1-wangxiongfeng2@huawei.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: xilinx-ams: fix devm_krealloc() return value check

commit 6794ed0cfcc6ce737240eccc48b3e8190df36703 upstream.

The clang-analyzer reported a warning: "Value stored to 'ret'
is never read".

Fix the return value check if devm_krealloc() fails to resize
ams_channels.

Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver")
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20221125113112.219290-1-marpagan@redhat.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>