William Zhang [Thu, 6 Jul 2023 18:29:07 +0000 (11:29 -0700)]
mtd: rawnand: brcmnand: Fix crash during the panic_write
commit
e66dd317194daae0475fe9e5577c80aa97f16cb9 upstream.
When executing a NAND command within the panic write path, wait for any
pending command instead of calling BUG_ON to avoid crashing while
already crashing.
Fixes:
27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Kursad Oney <kursad.oney@broadcom.com>
Reviewed-by: Kamal Dasu <kamal.dasu@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-4-william.zhang@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liu Ying [Mon, 12 Jun 2023 09:23:59 +0000 (17:23 +0800)]
drm/mxsfb: Disable overlay plane in mxsfb_plane_overlay_atomic_disable()
commit
aa656d48e871a1b062e1bbf9474d8b831c35074c upstream.
When disabling overlay plane in mxsfb_plane_overlay_atomic_update(),
overlay plane's framebuffer pointer is NULL. So, dereferencing it would
cause a kernel Oops(NULL pointer dereferencing). Fix the issue by
disabling overlay plane in mxsfb_plane_overlay_atomic_disable() instead.
Fixes:
cb285a5348e7 ("drm: mxsfb: Replace mxsfb_get_fb_paddr() with drm_fb_cma_get_gem_addr()")
Cc: stable@vger.kernel.org # 5.19+
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230612092359.784115-1-victor.liu@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anand Jain [Mon, 31 Jul 2023 11:16:34 +0000 (19:16 +0800)]
btrfs: use the correct superblock to compare fsid in btrfs_validate_super
commit
d167aa76dc0683828588c25767da07fb549e4f48 upstream.
The function btrfs_validate_super() should verify the fsid in the provided
superblock argument. Because, all its callers expect it to do that.
Such as in the following stack:
write_all_supers()
sb = fs_info->super_for_commit;
btrfs_validate_write_super(.., sb)
btrfs_validate_super(.., sb, ..)
scrub_one_super()
btrfs_validate_super(.., sb, ..)
And
check_dev_super()
btrfs_validate_super(.., sb, ..)
However, it currently verifies the fs_info::super_copy::fsid instead,
which is not correct. Fix this using the correct fsid in the superblock
argument.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Naohiro Aota [Mon, 7 Aug 2023 16:12:40 +0000 (01:12 +0900)]
btrfs: zoned: re-enable metadata over-commit for zoned mode
commit
5b135b382a360f4c87cf8896d1465b0b07f10cb0 upstream.
Now that, we can re-enable metadata over-commit. As we moved the activation
from the reservation time to the write time, we no longer need to ensure
all the reserved bytes is properly activated.
Without the metadata over-commit, it suffers from lower performance because
it needs to flush the delalloc items more often and allocate more block
groups. Re-enabling metadata over-commit will solve the issue.
Fixes:
79417d040f4f ("btrfs: zoned: disable metadata overcommit for zoned")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Mon, 31 Jul 2023 15:13:00 +0000 (11:13 -0400)]
btrfs: set page extent mapped after read_folio in relocate_one_page
commit
e7f1326cc24e22b38afc3acd328480a1183f9e79 upstream.
One of the CI runs triggered the following panic
assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229
------------[ cut here ]------------
kernel BUG at fs/btrfs/subpage.c:229!
Internal error: Oops - BUG:
00000000f2000800 [#1] SMP
CPU: 0 PID: 923660 Comm: btrfs Not tainted 6.5.0-rc3+ #1
pstate:
61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : btrfs_subpage_assert+0xbc/0xf0
lr : btrfs_subpage_assert+0xbc/0xf0
sp :
ffff800093213720
x29:
ffff800093213720 x28:
ffff8000932138b4 x27:
000000000c280000
x26:
00000001b5d00000 x25:
000000000c281000 x24:
000000000c281fff
x23:
0000000000001000 x22:
0000000000000000 x21:
ffffff42b95bf880
x20:
ffff42b9528e0000 x19:
0000000000001000 x18:
ffffffffffffffff
x17:
667274622f736620 x16:
6e69202c65746176 x15:
0000000000000028
x14:
0000000000000003 x13:
00000000002672d7 x12:
0000000000000000
x11:
ffffcd3f0ccd9204 x10:
ffffcd3f0554ae50 x9 :
ffffcd3f0379528c
x8 :
ffff800093213428 x7 :
0000000000000000 x6 :
ffffcd3f091771e8
x5 :
ffff42b97f333948 x4 :
0000000000000000 x3 :
0000000000000000
x2 :
0000000000000000 x1 :
ffff42b9556cde80 x0 :
000000000000004f
Call trace:
btrfs_subpage_assert+0xbc/0xf0
btrfs_subpage_set_dirty+0x38/0xa0
btrfs_page_set_dirty+0x58/0x88
relocate_one_page+0x204/0x5f0
relocate_file_extent_cluster+0x11c/0x180
relocate_data_extent+0xd0/0xf8
relocate_block_group+0x3d0/0x4e8
btrfs_relocate_block_group+0x2d8/0x490
btrfs_relocate_chunk+0x54/0x1a8
btrfs_balance+0x7f4/0x1150
btrfs_ioctl+0x10f0/0x20b8
__arm64_sys_ioctl+0x120/0x11d8
invoke_syscall.constprop.0+0x80/0xd8
do_el0_svc+0x6c/0x158
el0_svc+0x50/0x1b0
el0t_64_sync_handler+0x120/0x130
el0t_64_sync+0x194/0x198
Code:
91098021 b0007fa0 91346000 97e9c6d2 (
d4210000)
This is the same problem outlined in
17b17fcd6d44 ("btrfs:
set_page_extent_mapped after read_folio in btrfs_cont_expand") , and the
fix is the same. I originally looked for the same pattern elsewhere in
our code, but mistakenly skipped over this code because I saw the page
cache readahead before we set_page_extent_mapped, not realizing that
this was only in the !page case, that we can still end up with a
!uptodate page and then do the btrfs_read_folio further down.
The fix here is the same as the above mentioned patch, move the
set_page_extent_mapped call to after the btrfs_read_folio() block to
make sure that we have the subpage blocksize stuff setup properly before
using the page.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Wed, 26 Jul 2023 15:56:57 +0000 (16:56 +0100)]
btrfs: don't start transaction when joining with TRANS_JOIN_NOSTART
commit
4490e803e1fe9fab8db5025e44e23b55df54078b upstream.
When joining a transaction with TRANS_JOIN_NOSTART, if we don't find a
running transaction we end up creating one. This goes against the purpose
of TRANS_JOIN_NOSTART which is to join a running transaction if its state
is at or below the state TRANS_STATE_COMMIT_START, otherwise return an
-ENOENT error and don't start a new transaction. So fix this to not create
a new transaction if there's no running transaction at or below that
state.
CC: stable@vger.kernel.org # 4.14+
Fixes:
a6d155d2e363 ("Btrfs: fix deadlock between fiemap and transaction commits")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Boris Burkov [Fri, 21 Jul 2023 16:02:06 +0000 (09:02 -0700)]
btrfs: free qgroup rsv on io failure
commit
e28b02118b94e42be3355458a2406c6861e2dd32 upstream.
If we do a write whose bio suffers an error, we will never reclaim the
qgroup reserved space for it. We allocate the space in the write_iter
codepath, then release the reservation as we allocate the ordered
extent, but we only create a delayed ref if the ordered extent finishes.
If it has an error, we simply leak the rsv. This is apparent in running
any error injecting (dmerror) fstests like btrfs/146 or btrfs/160. Such
tests fail due to dmesg on umount complaining about the leaked qgroup
data space.
When we clean up other aspects of space on failed ordered_extents, also
free the qgroup rsv.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Boris Burkov [Fri, 21 Jul 2023 16:02:07 +0000 (09:02 -0700)]
btrfs: fix start transaction qgroup rsv double free
commit
a6496849671a5bc9218ecec25a983253b34351b1 upstream.
btrfs_start_transaction reserves metadata space of the PERTRANS type
before it identifies a transaction to start/join. This allows flushing
when reserving that space without a deadlock. However, it results in a
race which temporarily breaks qgroup rsv accounting.
T1 T2
start_transaction
do_stuff
start_transaction
qgroup_reserve_meta_pertrans
commit_transaction
qgroup_free_meta_all_pertrans
hit an error starting txn
goto reserve_fail
qgroup_free_meta_pertrans (already freed!)
The basic issue is that there is nothing preventing another commit from
committing before start_transaction finishes (in fact sometimes we
intentionally wait for it) so any error path that frees the reserve is
at risk of this race.
While this exact space was getting freed anyway, and it's not a huge
deal to double free it (just a warning, the free code catches this), it
can result in incorrectly freeing some other pertrans reservation in
this same reservation, which could then lead to spuriously granting
reservations we might not have the space for. Therefore, I do believe it
is worth fixing.
To fix it, use the existing prealloc->pertrans conversion mechanism.
When we first reserve the space, we reserve prealloc space and only when
we are sure we have a transaction do we convert it to pertrans. This way
any racing commits do not blow away our reservation, but we still get a
pertrans reservation that is freed when _this_ transaction gets committed.
This issue can be reproduced by running generic/269 with either qgroups
or squotas enabled via mkfs on the scratch device.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Naohiro Aota [Fri, 21 Jul 2023 07:42:14 +0000 (16:42 +0900)]
btrfs: zoned: do not zone finish data relocation block group
commit
332581bde2a419d5f12a93a1cdc2856af649a3cc upstream.
When multiple writes happen at once, we may need to sacrifice a currently
active block group to be zone finished for a new allocation. We choose a
block group with the least free space left, and zone finish it.
To do the finishing, we need to send IOs for already allocated region
and wait for them and on-going IOs. Otherwise, these IOs fail because the
zone is already finished at the time the IO reach a device.
However, if a block group dedicated to the data relocation is zone
finished, there is a chance that finishing it before an ongoing write IO
reaches the device. That is because there is timing gap between an
allocation is done (block_group->reservations == 0, as pre-allocation is
done) and an ordered extent is created when the relocation IO starts.
Thus, if we finish the zone between them, we can fail the IOs.
We cannot simply use "fs_info->data_reloc_bg == block_group->start" to
avoid the zone finishing. Because, the data_reloc_bg may already switch to
a new block group, while there are still ongoing write IOs to the old
data_reloc_bg.
So, this patch reworks the BLOCK_GROUP_FLAG_ZONED_DATA_RELOC bit to
indicate there is a data relocation allocation and/or ongoing write to the
block group. The bit is set on allocation and cleared in end_io function of
the last IO for the currently allocated region.
To change the timing of the bit setting also solves the issue that the bit
being left even after there is no IO going on. With the current code, if
the data_reloc_bg switches after the last IO to the current data_reloc_bg,
the bit is set at this timing and there is no one clearing that bit. As a
result, that block group is kept unallocatable for anything.
Fixes:
343d8a30851c ("btrfs: zoned: prevent allocation from previous data relocation BG")
Fixes:
74e91b12b115 ("btrfs: zoned: zone finish unused block group")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ruanmeisi [Tue, 25 Apr 2023 11:13:54 +0000 (19:13 +0800)]
fuse: nlookup missing decrement in fuse_direntplus_link
commit
b8bd342d50cbf606666488488f9fea374aceb2d5 upstream.
During our debugging of glusterfs, we found an Assertion failed error:
inode_lookup >= nlookup, which was caused by the nlookup value in the
kernel being greater than that in the FUSE file system.
The issue was introduced by fuse_direntplus_link, where in the function,
fuse_iget increments nlookup, and if d_splice_alias returns failure,
fuse_direntplus_link returns failure without decrementing nlookup
https://github.com/gluster/glusterfs/pull/4081
Signed-off-by: ruanmeisi <ruan.meisi@zte.com.cn>
Fixes:
0b05b18381ee ("fuse: implement NFS-like readdirplus support")
Cc: <stable@vger.kernel.org> # v3.9
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Damien Le Moal [Wed, 23 Aug 2023 22:41:59 +0000 (07:41 +0900)]
ata: pata_ftide010: Add missing MODULE_DESCRIPTION
commit
7274eef5729037300f29d14edeb334a47a098f65 upstream.
Add the missing MODULE_DESCRIPTION() to avoid warnings such as:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/ata/pata_ftide010.o
when compiling with W=1.
Fixes:
be4e456ed3a5 ("ata: Add driver for Faraday Technology FTIDE010")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Damien Le Moal [Wed, 23 Aug 2023 22:43:18 +0000 (07:43 +0900)]
ata: sata_gemini: Add missing MODULE_DESCRIPTION
commit
8566572bf3b4d6e416a4bf2110dbb4817d11ba59 upstream.
Add the missing MODULE_DESCRIPTION() to avoid warnings such as:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/ata/sata_gemini.o
when compiling with W=1.
Fixes:
be4e456ed3a5 ("ata: Add driver for Faraday Technology FTIDE010")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Schmitz [Sun, 27 Aug 2023 04:13:47 +0000 (16:13 +1200)]
ata: pata_falcon: fix IO base selection for Q40
commit
8a1f00b753ecfdb117dc1a07e68c46d80e7923ea upstream.
With commit
44b1fbc0f5f3 ("m68k/q40: Replace q40ide driver
with pata_falcon and falconide"), the Q40 IDE driver was
replaced by pata_falcon.c.
Both IO and memory resources were defined for the Q40 IDE
platform device, but definition of the IDE register addresses
was modeled after the Falcon case, both in use of the memory
resources and in including register shift and byte vs. word
offset in the address.
This was correct for the Falcon case, which does not apply
any address translation to the register addresses. In the
Q40 case, all of device base address, byte access offset
and register shift is included in the platform specific
ISA access translation (in asm/mm_io.h).
As a consequence, such address translation gets applied
twice, and register addresses are mangled.
Use the device base address from the platform IO resource
for Q40 (the IO address translation will then add the correct
ISA window base address and byte access offset), with register
shift 1. Use MMIO base address and register shift 2 as before
for Falcon.
Encode PIO_OFFSET into IO port addresses for all registers
for Q40 except the data transfer register. Encode the MMIO
offset there (pata_falcon_data_xfer() directly uses raw IO
with no address translation).
Reported-by: William R Sowerbutts <will@sowerbutts.com>
Closes: https://lore.kernel.org/r/CAMuHMdUU62jjunJh9cqSqHT87B0H0A4udOOPs=WN7WZKpcagVA@mail.gmail.com
Link: https://lore.kernel.org/r/CAMuHMdUU62jjunJh9cqSqHT87B0H0A4udOOPs=WN7WZKpcagVA@mail.gmail.com
Fixes:
44b1fbc0f5f3 ("m68k/q40: Replace q40ide driver with pata_falcon and falconide")
Cc: stable@vger.kernel.org
Cc: Finn Thain <fthain@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: William R Sowerbutts <will@sowerbutts.com>
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Werner Fischer [Tue, 29 Aug 2023 11:33:58 +0000 (13:33 +0200)]
ata: ahci: Add Elkhart Lake AHCI controller
commit
2a2df98ec592667927b5c1351afa6493ea125c9f upstream.
Elkhart Lake is the successor of Apollo Lake and Gemini Lake. These
CPUs and their PCHs are used in mobile and embedded environments.
With this patch I suggest that Elkhart Lake SATA controllers [1] should
use the default LPM policy for mobile chipsets.
The disadvantage of missing hot-plug support with this setting should
not be an issue, as those CPUs are used in embedded environments and
not in servers with hot-plug backplanes.
We discovered that the Elkhart Lake SATA controllers have been missing
in ahci.c after a customer reported the throttling of his SATA SSD
after a short period of higher I/O. We determined the high temperature
of the SSD controller in idle mode as the root cause for that.
Depending on the used SSD, we have seen up to 1.8 Watt lower system
idle power usage and up to 30°C lower SSD controller temperatures in
our tests, when we set med_power_with_dipm manually. I have provided a
table showing seven different SATA SSDs from ATP, Intel/Solidigm and
Samsung [2].
Intel lists a total of 3 SATA controller IDs (4B60, 4B62, 4B63) in [1]
for those mobile PCHs.
This commit just adds 0x4b63 as I do not have test systems with 0x4b60
and 0x4b62 SATA controllers.
I have tested this patch with a system which uses 0x4b63 as SATA
controller.
[1] https://sata-io.org/product/8803
[2] https://www.thomas-krenn.com/en/wiki/SATA_Link_Power_Management#Example_LES_v4
Signed-off-by: Werner Fischer <devlists@wefi.net>
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Marangi [Sun, 16 Jul 2023 02:28:04 +0000 (04:28 +0200)]
hwspinlock: qcom: add missing regmap config for SFPB MMIO implementation
commit
23316be8a9d450f33a21f1efe7d89570becbec58 upstream.
Commit
5d4753f741d8 ("hwspinlock: qcom: add support for MMIO on older
SoCs") introduced and made regmap_config mandatory in the of_data struct
but didn't add the regmap_config for sfpb based devices.
SFPB based devices can both use the legacy syscon way to probe or the
new MMIO way and currently device that use the MMIO way are broken as
they lack the definition of the now required regmap_config and always
return -EINVAL (and indirectly makes fail probing everything that
depends on it, smem, nandc with smem-parser...)
Fix this by correctly adding the missing regmap_config and restore
function of hwspinlock on SFPB based devices with MMIO implementation.
Cc: stable@vger.kernel.org
Fixes:
5d4753f741d8 ("hwspinlock: qcom: add support for MMIO on older SoCs")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20230716022804.21239-1-ansuelsmth@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Mon, 7 Aug 2023 15:36:28 +0000 (08:36 -0700)]
lib: test_scanf: Add explicit type cast to result initialization in test_number_prefix()
commit
92382d744176f230101d54f5c017bccd62770f01 upstream.
A recent change in clang allows it to consider more expressions as
compile time constants, which causes it to point out an implicit
conversion in the scanf tests:
lib/test_scanf.c:661:2: warning: implicit conversion from 'int' to 'unsigned char' changes value from -168 to 88 [-Wconstant-conversion]
661 | test_number_prefix(unsigned char, "0xA7", "%2hhx%hhx", 0, 0xa7, 2, check_uchar);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/test_scanf.c:609:29: note: expanded from macro 'test_number_prefix'
609 | T result[2] = {~expect[0], ~expect[1]}; \
| ~ ^~~~~~~~~~
1 warning generated.
The result of the bitwise negation is the type of the operand after
going through the integer promotion rules, so this truncation is
expected but harmless, as the initial values in the result array get
overwritten by _test() anyways. Add an explicit cast to the expected
type in test_number_prefix() to silence the warning. There is no
functional change, as all the tests still pass with GCC 13.1.0 and clang
18.0.0.
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linuxq/issues/1899
Link: https://github.com/llvm/llvm-project/commit/610ec954e1f81c0e8fcadedcd25afe643f5a094e
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230807-test_scanf-wconstant-conversion-v2-1-839ca39083e1@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaegeuk Kim [Fri, 18 Aug 2023 18:34:32 +0000 (11:34 -0700)]
f2fs: avoid false alarm of circular locking
commit
5c13e2388bf3426fd69a89eb46e50469e9624e56 upstream.
======================================================
WARNING: possible circular locking dependency detected
6.5.0-rc5-syzkaller-00353-gae545c3283dc #0 Not tainted
------------------------------------------------------
syz-executor273/5027 is trying to acquire lock:
ffff888077fe1fb0 (&fi->i_sem){+.+.}-{3:3}, at: f2fs_down_write fs/f2fs/f2fs.h:2133 [inline]
ffff888077fe1fb0 (&fi->i_sem){+.+.}-{3:3}, at: f2fs_add_inline_entry+0x300/0x6f0 fs/f2fs/inline.c:644
but task is already holding lock:
ffff888077fe07c8 (&fi->i_xattr_sem){.+.+}-{3:3}, at: f2fs_down_read fs/f2fs/f2fs.h:2108 [inline]
ffff888077fe07c8 (&fi->i_xattr_sem){.+.+}-{3:3}, at: f2fs_add_dentry+0x92/0x230 fs/f2fs/dir.c:783
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&fi->i_xattr_sem){.+.+}-{3:3}:
down_read+0x9c/0x470 kernel/locking/rwsem.c:1520
f2fs_down_read fs/f2fs/f2fs.h:2108 [inline]
f2fs_getxattr+0xb1e/0x12c0 fs/f2fs/xattr.c:532
__f2fs_get_acl+0x5a/0x900 fs/f2fs/acl.c:179
f2fs_acl_create fs/f2fs/acl.c:377 [inline]
f2fs_init_acl+0x15c/0xb30 fs/f2fs/acl.c:420
f2fs_init_inode_metadata+0x159/0x1290 fs/f2fs/dir.c:558
f2fs_add_regular_entry+0x79e/0xb90 fs/f2fs/dir.c:740
f2fs_add_dentry+0x1de/0x230 fs/f2fs/dir.c:788
f2fs_do_add_link+0x190/0x280 fs/f2fs/dir.c:827
f2fs_add_link fs/f2fs/f2fs.h:3554 [inline]
f2fs_mkdir+0x377/0x620 fs/f2fs/namei.c:781
vfs_mkdir+0x532/0x7e0 fs/namei.c:4117
do_mkdirat+0x2a9/0x330 fs/namei.c:4140
__do_sys_mkdir fs/namei.c:4160 [inline]
__se_sys_mkdir fs/namei.c:4158 [inline]
__x64_sys_mkdir+0xf2/0x140 fs/namei.c:4158
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
-> #0 (&fi->i_sem){+.+.}-{3:3}:
check_prev_add kernel/locking/lockdep.c:3142 [inline]
check_prevs_add kernel/locking/lockdep.c:3261 [inline]
validate_chain kernel/locking/lockdep.c:3876 [inline]
__lock_acquire+0x2e3d/0x5de0 kernel/locking/lockdep.c:5144
lock_acquire kernel/locking/lockdep.c:5761 [inline]
lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5726
down_write+0x93/0x200 kernel/locking/rwsem.c:1573
f2fs_down_write fs/f2fs/f2fs.h:2133 [inline]
f2fs_add_inline_entry+0x300/0x6f0 fs/f2fs/inline.c:644
f2fs_add_dentry+0xa6/0x230 fs/f2fs/dir.c:784
f2fs_do_add_link+0x190/0x280 fs/f2fs/dir.c:827
f2fs_add_link fs/f2fs/f2fs.h:3554 [inline]
f2fs_mkdir+0x377/0x620 fs/f2fs/namei.c:781
vfs_mkdir+0x532/0x7e0 fs/namei.c:4117
ovl_do_mkdir fs/overlayfs/overlayfs.h:196 [inline]
ovl_mkdir_real+0xb5/0x370 fs/overlayfs/dir.c:146
ovl_workdir_create+0x3de/0x820 fs/overlayfs/super.c:309
ovl_make_workdir fs/overlayfs/super.c:711 [inline]
ovl_get_workdir fs/overlayfs/super.c:864 [inline]
ovl_fill_super+0xdab/0x6180 fs/overlayfs/super.c:1400
vfs_get_super+0xf9/0x290 fs/super.c:1152
vfs_get_tree+0x88/0x350 fs/super.c:1519
do_new_mount fs/namespace.c:3335 [inline]
path_mount+0x1492/0x1ed0 fs/namespace.c:3662
do_mount fs/namespace.c:3675 [inline]
__do_sys_mount fs/namespace.c:3884 [inline]
__se_sys_mount fs/namespace.c:3861 [inline]
__x64_sys_mount+0x293/0x310 fs/namespace.c:3861
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock(&fi->i_xattr_sem);
lock(&fi->i_sem);
lock(&fi->i_xattr_sem);
lock(&fi->i_sem);
Cc: <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+e5600587fa9cbf8e3826@syzkaller.appspotmail.com
Fixes:
5eda1ad1aaff "f2fs: fix deadlock in i_xattr_sem and inode page lock"
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaegeuk Kim [Fri, 7 Jul 2023 14:03:13 +0000 (07:03 -0700)]
f2fs: flush inode if atomic file is aborted
commit
a3ab55746612247ce3dcaac6de66f5ffc055b9df upstream.
Let's flush the inode being aborted atomic operation to avoid stale dirty
inode during eviction in this call stack:
f2fs_mark_inode_dirty_sync+0x22/0x40 [f2fs]
f2fs_abort_atomic_write+0xc4/0xf0 [f2fs]
f2fs_evict_inode+0x3f/0x690 [f2fs]
? sugov_start+0x140/0x140
evict+0xc3/0x1c0
evict_inodes+0x17b/0x210
generic_shutdown_super+0x32/0x120
kill_block_super+0x21/0x50
deactivate_locked_super+0x31/0x90
cleanup_mnt+0x100/0x160
task_work_run+0x59/0x90
do_exit+0x33b/0xa50
do_group_exit+0x2d/0x80
__x64_sys_exit_group+0x14/0x20
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
This triggers f2fs_bug_on() in f2fs_evict_inode:
f2fs_bug_on(sbi, is_inode_flag_set(inode, FI_DIRTY_INODE));
This fixes the syzbot report:
loop0: detected capacity change from 0 to 131072
F2FS-fs (loop0): invalid crc value
F2FS-fs (loop0): Found nat_bits in checkpoint
F2FS-fs (loop0): Mounted with checkpoint version =
48b305e4
------------[ cut here ]------------
kernel BUG at fs/f2fs/inode.c:869!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 5014 Comm: syz-executor220 Not tainted 6.4.0-syzkaller-11479-g6cd06ab12d1a #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
RIP: 0010:f2fs_evict_inode+0x172d/0x1e00 fs/f2fs/inode.c:869
Code: ff df 48 c1 ea 03 80 3c 02 00 0f 85 6a 06 00 00 8b 75 40 ba 01 00 00 00 4c 89 e7 e8 6d ce 06 00 e9 aa fc ff ff e8 63 22 e2 fd <0f> 0b e8 5c 22 e2 fd 48 c7 c0 a8 3a 18 8d 48 ba 00 00 00 00 00 fc
RSP: 0018:
ffffc90003a6fa00 EFLAGS:
00010293
RAX:
0000000000000000 RBX:
0000000000000001 RCX:
0000000000000000
RDX:
ffff8880273b8000 RSI:
ffffffff83a2bd0d RDI:
0000000000000007
RBP:
ffff888077db91b0 R08:
0000000000000007 R09:
0000000000000000
R10:
0000000000000001 R11:
0000000000000001 R12:
ffff888029a3c000
R13:
ffff888077db9660 R14:
ffff888029a3c0b8 R15:
ffff888077db9c50
FS:
0000000000000000(0000) GS:
ffff8880b9800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f1909bb9000 CR3:
00000000276a9000 CR4:
0000000000350ef0
Call Trace:
<TASK>
evict+0x2ed/0x6b0 fs/inode.c:665
dispose_list+0x117/0x1e0 fs/inode.c:698
evict_inodes+0x345/0x440 fs/inode.c:748
generic_shutdown_super+0xaf/0x480 fs/super.c:478
kill_block_super+0x64/0xb0 fs/super.c:1417
kill_f2fs_super+0x2af/0x3c0 fs/f2fs/super.c:4704
deactivate_locked_super+0x98/0x160 fs/super.c:330
deactivate_super+0xb1/0xd0 fs/super.c:361
cleanup_mnt+0x2ae/0x3d0 fs/namespace.c:1254
task_work_run+0x16f/0x270 kernel/task_work.c:179
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0xa9a/0x29a0 kernel/exit.c:874
do_group_exit+0xd4/0x2a0 kernel/exit.c:1024
__do_sys_exit_group kernel/exit.c:1035 [inline]
__se_sys_exit_group kernel/exit.c:1033 [inline]
__x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1033
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f309be71a09
Code: Unable to access opcode bytes at 0x7f309be719df.
RSP: 002b:
00007fff171df518 EFLAGS:
00000246 ORIG_RAX:
00000000000000e7
RAX:
ffffffffffffffda RBX:
00007f309bef7330 RCX:
00007f309be71a09
RDX:
000000000000003c RSI:
00000000000000e7 RDI:
0000000000000001
RBP:
0000000000000001 R08:
ffffffffffffffc0 R09:
00007f309bef1e40
R10:
0000000000010600 R11:
0000000000000246 R12:
00007f309bef7330
R13:
0000000000000001 R14:
0000000000000000 R15:
0000000000000001
</TASK>
Modules linked in:
---[ end trace
0000000000000000 ]---
RIP: 0010:f2fs_evict_inode+0x172d/0x1e00 fs/f2fs/inode.c:869
Code: ff df 48 c1 ea 03 80 3c 02 00 0f 85 6a 06 00 00 8b 75 40 ba 01 00 00 00 4c 89 e7 e8 6d ce 06 00 e9 aa fc ff ff e8 63 22 e2 fd <0f> 0b e8 5c 22 e2 fd 48 c7 c0 a8 3a 18 8d 48 ba 00 00 00 00 00 fc
RSP: 0018:
ffffc90003a6fa00 EFLAGS:
00010293
RAX:
0000000000000000 RBX:
0000000000000001 RCX:
0000000000000000
RDX:
ffff8880273b8000 RSI:
ffffffff83a2bd0d RDI:
0000000000000007
RBP:
ffff888077db91b0 R08:
0000000000000007 R09:
0000000000000000
R10:
0000000000000001 R11:
0000000000000001 R12:
ffff888029a3c000
R13:
ffff888077db9660 R14:
ffff888029a3c0b8 R15:
ffff888077db9c50
FS:
0000000000000000(0000) GS:
ffff8880b9800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f1909bb9000 CR3:
00000000276a9000 CR4:
0000000000350ef0
Cc: <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+e1246909d526a9d470fa@syzkaller.appspotmail.com
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luís Henriques [Thu, 3 Aug 2023 09:17:13 +0000 (10:17 +0100)]
ext4: fix memory leaks in ext4_fname_{setup_filename,prepare_lookup}
commit
7ca4b085f430f3774c3838b3da569ceccd6a0177 upstream.
If the filename casefolding fails, we'll be leaking memory from the
fscrypt_name struct, namely from the 'crypto_buf.name' member.
Make sure we free it in the error path on both ext4_fname_setup_filename()
and ext4_fname_prepare_lookup() functions.
Cc: stable@kernel.org
Fixes:
1ae98e295fa2 ("ext4: optimize match for casefolded encrypted dirs")
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230803091713.13239-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wang Jianjian [Wed, 2 Aug 2023 16:28:39 +0000 (00:28 +0800)]
ext4: add correct group descriptors and reserved GDT blocks to system zone
commit
68228da51c9a436872a4ef4b5a7692e29f7e5bc7 upstream.
When setup_system_zone, flex_bg is not initialized so it is always 1.
Use a new helper function, ext4_num_base_meta_blocks() which does not
depend on sbi->s_log_groups_per_flex being initialized.
[ Squashed two patches in the Link URL's below together into a single
commit, which is simpler to review/understand. Also fix checkpatch
warnings. --TYT ]
Cc: stable@kernel.org
Signed-off-by: Wang Jianjian <wangjianjian0@foxmail.com>
Link: https://lore.kernel.org/r/tencent_21AF0D446A9916ED5C51492CC6C9A0A77B05@qq.com
Link: https://lore.kernel.org/r/tencent_D744D1450CC169AEA77FCF0A64719909ED05@qq.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhang Yi [Mon, 26 Jun 2023 07:33:22 +0000 (15:33 +0800)]
jbd2: correct the end of the journal recovery scan range
commit
2dfba3bb40ad8536b9fa802364f2d40da31aa88e upstream.
We got a filesystem inconsistency issue below while running generic/475
I/O failure pressure test with fast_commit feature enabled.
Symlink /p3/d3/d1c/d6c/dd6/dce/l101 (inode #132605) is invalid.
If fast_commit feature is enabled, a special fast_commit journal area is
appended to the end of the normal journal area. The journal->j_last
point to the first unused block behind the normal journal area instead
of the whole log area, and the journal->j_fc_last point to the first
unused block behind the fast_commit journal area. While doing journal
recovery, do_one_pass(PASS_SCAN) should first scan the normal journal
area and turn around to the first block once it meet journal->j_last,
but the wrap() macro misuse the journal->j_fc_last, so the recovering
could not read the next magic block (commit block perhaps) and would end
early mistakenly and missing tN and every transaction after it in the
following example. Finally, it could lead to filesystem inconsistency.
| normal journal area | fast commit area |
+-------------------------------------------------+------------------+
| tN(rere) | tN+1 |~| tN-x |...| tN-1 | tN(front) | .... |
+-------------------------------------------------+------------------+
/ / /
start journal->j_last journal->j_fc_last
This patch fix it by use the correct ending journal->j_last.
Fixes:
5b849b5f96b4 ("jbd2: fast commit recovery path")
Cc: stable@kernel.org
Reported-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/linux-ext4/20230613043120.GB1584772@mit.edu/
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230626073322.3956567-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhihao Cheng [Fri, 14 Jul 2023 02:55:27 +0000 (10:55 +0800)]
jbd2: check 'jh->b_transaction' before removing it from checkpoint
commit
590a809ff743e7bd890ba5fb36bc38e20a36de53 upstream.
Following process will corrupt ext4 image:
Step 1:
jbd2_journal_commit_transaction
__jbd2_journal_insert_checkpoint(jh, commit_transaction)
// Put jh into trans1->t_checkpoint_list
journal->j_checkpoint_transactions = commit_transaction
// Put trans1 into journal->j_checkpoint_transactions
Step 2:
do_get_write_access
test_clear_buffer_dirty(bh) // clear buffer dirty,set jbd dirty
__jbd2_journal_file_buffer(jh, transaction) // jh belongs to trans2
Step 3:
drop_cache
journal_shrink_one_cp_list
jbd2_journal_try_remove_checkpoint
if (!trylock_buffer(bh)) // lock bh, true
if (buffer_dirty(bh)) // buffer is not dirty
__jbd2_journal_remove_checkpoint(jh)
// remove jh from trans1->t_checkpoint_list
Step 4:
jbd2_log_do_checkpoint
trans1 = journal->j_checkpoint_transactions
// jh is not in trans1->t_checkpoint_list
jbd2_cleanup_journal_tail(journal) // trans1 is done
Step 5: Power cut, trans2 is not committed, jh is lost in next mounting.
Fix it by checking 'jh->b_transaction' before remove it from checkpoint.
Cc: stable@kernel.org
Fixes:
46f881b5b175 ("jbd2: fix a race when checking checkpoint buffer busy")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230714025528.564988-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhang Yi [Fri, 14 Jul 2023 02:55:26 +0000 (10:55 +0800)]
jbd2: fix checkpoint cleanup performance regression
commit
373ac521799d9e97061515aca6ec6621789036bb upstream.
journal_clean_one_cp_list() has been merged into
journal_shrink_one_cp_list(), but do chekpoint buffer cleanup from the
committing process is just a best effort, it should stop scan once it
meet a busy buffer, or else it will cause a lot of invalid buffer scan
and checks. We catch a performance regression when doing fs_mark tests
below.
Test cmd:
./fs_mark -d scratch -s 1024 -n 10000 -t 1 -D 100 -N 100
Before merging checkpoint buffer cleanup:
FSUse% Count Size Files/sec App Overhead
95 10000 1024 8304.9 49033
After merging checkpoint buffer cleanup:
FSUse% Count Size Files/sec App Overhead
95 10000 1024 7649.0 50012
FSUse% Count Size Files/sec App Overhead
95 10000 1024 2107.1 50871
After merging checkpoint buffer cleanup, the total loop count in
journal_shrink_one_cp_list() could be up to 6,261,600+ (50,000+ ~
100,000+ in general), most of them are invalid. This patch fix it
through passing 'shrink_type' into journal_shrink_one_cp_list() and add
a new 'SHRINK_BUSY_STOP' to indicate it should stop once meet a busy
buffer. After fix, the loop count descending back to 10,000+.
After this fix:
FSUse% Count Size Files/sec App Overhead
95 10000 1024 8558.4 49109
Cc: stable@kernel.org
Fixes:
b98dba273a0e ("jbd2: remove journal_clean_one_cp_list()")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230714025528.564988-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hien Huynh [Thu, 6 Jul 2023 11:21:50 +0000 (12:21 +0100)]
dmaengine: sh: rz-dmac: Fix destination and source data size setting
commit
c6ec8c83a29fb3aec3efa6fabbf5344498f57c7f upstream.
Before setting DDS and SDS values, we need to clear its value first
otherwise, we get incorrect results when we change/update the DMA bus
width several times due to the 'OR' expression.
Fixes:
5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC")
Cc: stable@kernel.org
Signed-off-by: Hien Huynh <hien.huynh.px@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230706112150.198941-3-biju.das.jz@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Walter Chang [Mon, 17 Jul 2023 09:07:34 +0000 (17:07 +0800)]
clocksource/drivers/arm_arch_timer: Disable timer before programming CVAL
commit
e7d65e40ab5a5940785c5922f317602d0268caaf upstream.
Due to the fact that the use of `writeq_relaxed()` to program CVAL is
not guaranteed to be atomic, it is necessary to disable the timer before
programming CVAL.
However, if the MMIO timer is already enabled and has not yet expired,
there is a possibility of unexpected behavior occurring: when the CPU
enters the idle state during this period, and if the CPU's local event
is earlier than the broadcast event, the following process occurs:
tick_broadcast_enter()
tick_broadcast_oneshot_control(TICK_BROADCAST_ENTER)
__tick_broadcast_oneshot_control()
___tick_broadcast_oneshot_control()
tick_broadcast_set_event()
clockevents_program_event()
set_next_event_mem()
During this process, the MMIO timer remains enabled while programming
CVAL. To prevent such behavior, disable timer explicitly prior to
programming CVAL.
Fixes:
8b82c4f883a7 ("clocksource/drivers/arm_arch_timer: Move MMIO timer programming over to CVAL")
Cc: stable@vger.kernel.org
Signed-off-by: Walter Chang <walter.chang@mediatek.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230717090735.19370-1-walter.chang@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Kozlov [Tue, 15 Aug 2023 15:11:36 +0000 (19:11 +0400)]
ARC: atomics: Add compiler barrier to atomic operations...
commit
42f51fb24fd39cc547c086ab3d8a314cc603a91c upstream.
... to avoid unwanted gcc optimizations
SMP kernels fail to boot with commit
596ff4a09b89
("cpumask: re-introduce constant-sized cpumask optimizations").
|
| percpu: BUG: failure at mm/percpu.c:2981/pcpu_build_alloc_info()!
|
The write operation performed by the SCOND instruction in the atomic
inline asm code is not properly passed to the compiler. The compiler
cannot correctly optimize a nested loop that runs through the cpumask
in the pcpu_build_alloc_info() function.
Fix this by add a compiler barrier (memory clobber in inline asm).
Apparently atomic ops used to have memory clobber implicitly via
surrounding smp_mb(). However commit
b64be6836993c431e
("ARC: atomics: implement relaxed variants") removed the smp_mb() for
the relaxed variants, but failed to add the explicit compiler barrier.
Link: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/135
Cc: <stable@vger.kernel.org> # v6.3+
Fixes:
b64be6836993c43 ("ARC: atomics: implement relaxed variants")
Signed-off-by: Pavel Kozlov <pavel.kozlov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
[vgupta: tweaked the changelog and added Fixes tag]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Saeed Mahameed [Thu, 8 Jun 2023 19:00:54 +0000 (12:00 -0700)]
net/mlx5: Free IRQ rmap and notifier on kernel shutdown
commit
314ded538e5f22e7610b1bf621402024a180ec80 upstream.
The kernel IRQ system needs the irq affinity notifier to be clear
before attempting to free the irq, see WARN_ON log below.
On a normal driver unload we don't have this issue since we do the
complete cleanup of the irq resources.
To fix this, put the important resources cleanup in a helper function
and use it in both normal driver unload and shutdown flows.
[ 4497.498434] ------------[ cut here ]------------
[ 4497.498726] WARNING: CPU: 0 PID: 9 at kernel/irq/manage.c:2034 free_irq+0x295/0x340
[ 4497.499193] Modules linked in:
[ 4497.499386] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.4.0-rc4+ #10
[ 4497.499876] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
[ 4497.500518] Workqueue: events do_poweroff
[ 4497.500849] RIP: 0010:free_irq+0x295/0x340
[ 4497.501132] Code: 85 c0 0f 84 1d ff ff ff 48 89 ef ff d0 0f 1f 00 e9 10 ff ff ff 0f 0b e9 72 ff ff ff 49 8d 7f 28 ff d0 0f 1f 00 e9 df fd ff ff <0f> 0b 48 c7 80 c0 008
[ 4497.502269] RSP: 0018:
ffffc90000053da0 EFLAGS:
00010282
[ 4497.502589] RAX:
ffff888100949600 RBX:
ffff88810330b948 RCX:
0000000000000000
[ 4497.503035] RDX:
ffff888100949600 RSI:
ffff888100400490 RDI:
0000000000000023
[ 4497.503472] RBP:
ffff88810330c7e0 R08:
ffff8881004005d0 R09:
ffffffff8273a260
[ 4497.503923] R10:
0000000000000000 R11:
0000000000000000 R12:
ffff8881009ae000
[ 4497.504359] R13:
ffff8881009ae148 R14:
0000000000000000 R15:
ffff888100949600
[ 4497.504804] FS:
0000000000000000(0000) GS:
ffff88813bc00000(0000) knlGS:
0000000000000000
[ 4497.505302] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 4497.505671] CR2:
00007fce98806298 CR3:
000000000262e005 CR4:
0000000000370ef0
[ 4497.506104] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 4497.506540] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 4497.507002] Call Trace:
[ 4497.507158] <TASK>
[ 4497.507299] ? free_irq+0x295/0x340
[ 4497.507522] ? __warn+0x7c/0x130
[ 4497.507740] ? free_irq+0x295/0x340
[ 4497.507963] ? report_bug+0x171/0x1a0
[ 4497.508197] ? handle_bug+0x3c/0x70
[ 4497.508417] ? exc_invalid_op+0x17/0x70
[ 4497.508662] ? asm_exc_invalid_op+0x1a/0x20
[ 4497.508926] ? free_irq+0x295/0x340
[ 4497.509146] mlx5_irq_pool_free_irqs+0x48/0x90
[ 4497.509421] mlx5_irq_table_free_irqs+0x38/0x50
[ 4497.509714] mlx5_core_eq_free_irqs+0x27/0x40
[ 4497.509984] shutdown+0x7b/0x100
[ 4497.510184] pci_device_shutdown+0x30/0x60
[ 4497.510440] device_shutdown+0x14d/0x240
[ 4497.510698] kernel_power_off+0x30/0x70
[ 4497.510938] process_one_work+0x1e6/0x3e0
[ 4497.511183] worker_thread+0x49/0x3b0
[ 4497.511407] ? __pfx_worker_thread+0x10/0x10
[ 4497.511679] kthread+0xe0/0x110
[ 4497.511879] ? __pfx_kthread+0x10/0x10
[ 4497.512114] ret_from_fork+0x29/0x50
[ 4497.512342] </TASK>
Fixes:
9c2d08010963 ("net/mlx5: Free irqs only on shutdown callback")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Mathieu Tortuyaux <mtortuyaux@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kalesh Singh [Wed, 2 Aug 2023 02:56:03 +0000 (19:56 -0700)]
Multi-gen LRU: avoid race in inc_min_seq()
commit
bb5e7f234eacf34b65be67ebb3613e3b8cf11b87 upstream.
inc_max_seq() will try to inc_min_seq() if nr_gens == MAX_NR_GENS. This
is because the generations are reused (the last oldest now empty
generation will become the next youngest generation).
inc_min_seq() is retried until successful, dropping the lru_lock
and yielding the CPU on each failure, and retaking the lock before
trying again:
while (!inc_min_seq(lruvec, type, can_swap)) {
spin_unlock_irq(&lruvec->lru_lock);
cond_resched();
spin_lock_irq(&lruvec->lru_lock);
}
However, the initial condition that required incrementing the min_seq
(nr_gens == MAX_NR_GENS) is not retested. This can change by another
call to inc_max_seq() from run_aging() with force_scan=true from the
debugfs interface.
Since the eviction stalls when the nr_gens == MIN_NR_GENS, avoid
unnecessarily incrementing the min_seq by rechecking the number of
generations before each attempt.
This issue was uncovered in previous discussion on the list by Yu Zhao
and Aneesh Kumar [1].
[1] https://lore.kernel.org/linux-mm/CAOUHufbO7CaVm=xjEb1avDhHVvnC8pJmGyKcFf2iY_dpf+zR3w@mail.gmail.com/
Link: https://lkml.kernel.org/r/20230802025606.346758-2-kaleshsingh@google.com
Fixes:
d6c3af7d8a2b ("mm: multi-gen LRU: debugfs interface")
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> [mediatek]
Tested-by: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Aneesh Kumar K V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Steven Barrett <steven@liquorix.net>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Petr Tesarik [Mon, 24 Jul 2023 12:07:42 +0000 (14:07 +0200)]
sh: boards: Fix CEU buffer size passed to dma_declare_coherent_memory()
[ Upstream commit
fb60211f377b69acffead3147578f86d0092a7a5 ]
In all these cases, the last argument to dma_declare_coherent_memory() is
the buffer end address, but the expected value should be the size of the
reserved region.
Fixes:
39fb993038e1 ("media: arch: sh: ap325rxa: Use new renesas-ceu camera driver")
Fixes:
c2f9b05fd5c1 ("media: arch: sh: ecovec: Use new renesas-ceu camera driver")
Fixes:
f3590dc32974 ("media: arch: sh: kfr2r09: Use new renesas-ceu camera driver")
Fixes:
186c446f4b84 ("media: arch: sh: migor: Use new renesas-ceu camera driver")
Fixes:
1a3c230b4151 ("media: arch: sh: ms7724se: Use new renesas-ceu camera driver")
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20230724120742.2187-1-petrtesarik@huaweicloud.com
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jie Wang [Wed, 6 Sep 2023 07:20:18 +0000 (15:20 +0800)]
net: hns3: remove GSO partial feature bit
[ Upstream commit
60326634f6c54528778de18bfef1e8a7a93b3771 ]
HNS3 NIC does not support GSO partial packets segmentation. Actually tunnel
packets for example NvGRE packets segment offload and checksum offload is
already supported. There is no need to keep gso partial feature bit. So
this patch removes it.
Fixes:
76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yisen Zhuang [Wed, 6 Sep 2023 07:20:17 +0000 (15:20 +0800)]
net: hns3: fix the port information display when sfp is absent
[ Upstream commit
674d9591a32d01df75d6b5fffed4ef942a294376 ]
When sfp is absent or unidentified, the port type should be
displayed as PORT_OTHERS, rather than PORT_FIBRE.
Fixes:
88d10bd6f730 ("net: hns3: add support for multiple media type")
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jijie Shao [Wed, 6 Sep 2023 07:20:16 +0000 (15:20 +0800)]
net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
[ Upstream commit
fa5564945f7d15ae2390b00c08b6abaef0165cda ]
We hope that tc qdisc and dcb ets commands can not be used crosswise.
If we want to use any of the commands to configure tc,
We must use the other command to clear the existing configuration.
However, when we configure a single tc with tc qdisc,
we can still configure it with dcb ets.
Because we use mqprio_active as the tag of tc qdisc configuration,
but with dcb ets, we do not check mqprio_active.
This patch fix this issue by check mqprio_active before
executing the dcb ets command. and add dcb_ets_active to
replace HCLGE_FLAG_DCB_ENABLE and HCLGE_FLAG_MQPRIO_ENABLE
at the hclge layer,
Fixes:
cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hao Chen [Wed, 6 Sep 2023 07:20:15 +0000 (15:20 +0800)]
net: hns3: fix debugfs concurrency issue between kfree buffer and read
[ Upstream commit
c295160b1d95e885f1af4586a221cb221d232d10 ]
Now in hns3_dbg_uninit(), there may be concurrency between
kfree buffer and read, it may result in memory error.
Moving debugfs_remove_recursive() in front of kfree buffer to ensure
they don't happen at the same time.
Fixes:
5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hao Chen [Wed, 6 Sep 2023 07:20:14 +0000 (15:20 +0800)]
net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
[ Upstream commit
efccf655e99b6907ca07a466924e91805892e7d3 ]
req1->tcam_data is defined as "u8 tcam_data[8]", and we convert it as
(u32 *) without considerring byte order conversion,
it may result in printing wrong data for tcam_data.
Convert tcam_data to (__le32 *) first to fix it.
Fixes:
b5a0b70d77b9 ("net: hns3: refactor dump fd tcam of debugfs")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jian Shen [Wed, 6 Sep 2023 07:20:12 +0000 (15:20 +0800)]
net: hns3: fix tx timeout issue
[ Upstream commit
61a1deacc3d4fd3d57d7fda4d935f7f7503e8440 ]
Currently, the driver knocks the ring doorbell before updating
the ring->last_to_use in tx flow. if the hardware transmiting
packet and napi poll scheduling are fast enough, it may get
the old ring->last_to_use in drivers' napi poll.
In this case, the driver will think the tx is not completed, and
return directly without clear the flag __QUEUE_STATE_STACK_XOFF,
which may cause tx timeout.
Fixes:
20d06ca2679c ("net: hns3: optimize the tx clean process")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wander Lairson Costa [Fri, 1 Sep 2023 13:50:20 +0000 (10:50 -0300)]
netfilter: nfnetlink_osf: avoid OOB read
[ Upstream commit
f4f8a7803119005e87b716874bec07c751efafec ]
The opt_num field is controlled by user mode and is not currently
validated inside the kernel. An attacker can take advantage of this to
trigger an OOB read and potentially leak information.
BUG: KASAN: slab-out-of-bounds in nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88
Read of size 2 at addr
ffff88804bc64272 by task poc/6431
CPU: 1 PID: 6431 Comm: poc Not tainted 6.0.0-rc4 #1
Call Trace:
nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88
nf_osf_find+0x186/0x2f0 net/netfilter/nfnetlink_osf.c:281
nft_osf_eval+0x37f/0x590 net/netfilter/nft_osf.c:47
expr_call_ops_eval net/netfilter/nf_tables_core.c:214
nft_do_chain+0x2b0/0x1490 net/netfilter/nf_tables_core.c:264
nft_do_chain_ipv4+0x17c/0x1f0 net/netfilter/nft_chain_filter.c:23
[..]
Also add validation to genre, subtype and version fields.
Fixes:
11eeef41d5f6 ("netfilter: passive OS fingerprint xtables match")
Reported-by: Lucas Leong <wmliang@infosec.exchange>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Westphal [Tue, 5 Sep 2023 21:13:56 +0000 (23:13 +0200)]
netfilter: nftables: exthdr: fix 4-byte stack OOB write
[ Upstream commit
fd94d9dadee58e09b49075240fe83423eb1dcd36 ]
If priv->len is a multiple of 4, then dst[len / 4] can write past
the destination array which leads to stack corruption.
This construct is necessary to clean the remainder of the register
in case ->len is NOT a multiple of the register size, so make it
conditional just like nft_payload.c does.
The bug was added in 4.1 cycle and then copied/inherited when
tcp/sctp and ip option support was added.
Bug reported by Zero Day Initiative project (ZDI-CAN-21950,
ZDI-CAN-21951, ZDI-CAN-21961).
Fixes:
49499c3e6e18 ("netfilter: nf_tables: switch registers to 32 bit addressing")
Fixes:
935b7f643018 ("netfilter: nft_exthdr: add TCP option matching")
Fixes:
133dc203d77d ("netfilter: nft_exthdr: Support SCTP chunks")
Fixes:
dbb5281a1f84 ("netfilter: nf_tables: add support for matching IPv4 options")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sebastian Andrzej Siewior [Wed, 30 Aug 2023 08:04:05 +0000 (10:04 +0200)]
bpf: Assign bpf_tramp_run_ctx::saved_run_ctx before recursion check.
[ Upstream commit
6764e767f4af1e35f87f3497e1182d945de37f93 ]
__bpf_prog_enter_recur() assigns bpf_tramp_run_ctx::saved_run_ctx before
performing the recursion check which means in case of a recursion
__bpf_prog_exit_recur() uses the previously set bpf_tramp_run_ctx::saved_run_ctx
value.
__bpf_prog_enter_sleepable_recur() assigns bpf_tramp_run_ctx::saved_run_ctx
after the recursion check which means in case of a recursion
__bpf_prog_exit_sleepable_recur() uses an uninitialized value. This does not
look right. If I read the entry trampoline code right, then bpf_tramp_run_ctx
isn't initialized upfront.
Align __bpf_prog_enter_sleepable_recur() with __bpf_prog_enter_recur() and
set bpf_tramp_run_ctx::saved_run_ctx before the recursion check is made.
Remove the assignment of saved_run_ctx in kern_sys_bpf() since it happens
a few cycles later.
Fixes:
e384c7b7b46d0 ("bpf, x86: Create bpf_tramp_run_ctx on the caller thread's stack")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230830080405.251926-3-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sebastian Andrzej Siewior [Wed, 30 Aug 2023 08:04:04 +0000 (10:04 +0200)]
bpf: Invoke __bpf_prog_exit_sleepable_recur() on recursion in kern_sys_bpf().
[ Upstream commit
7645629f7dc88cd777f98970134bf1a54c8d77e3 ]
If __bpf_prog_enter_sleepable_recur() detects recursion then it returns
0 without undoing rcu_read_lock_trace(), migrate_disable() or
decrementing the recursion counter. This is fine in the JIT case because
the JIT code will jump in the 0 case to the end and invoke the matching
exit trampoline (__bpf_prog_exit_sleepable_recur()).
This is not the case in kern_sys_bpf() which returns directly to the
caller with an error code.
Add __bpf_prog_exit_sleepable_recur() as clean up in the recursion case.
Fixes:
b1d18a7574d0d ("bpf: Extend sys_bpf commands for bpf_syscall programs.")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230830080405.251926-2-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin KaFai Lau [Tue, 25 Oct 2022 18:45:16 +0000 (11:45 -0700)]
bpf: Remove prog->active check for bpf_lsm and bpf_iter
[ Upstream commit
271de525e1d7f564e88a9d212c50998b49a54476 ]
The commit
64696c40d03c ("bpf: Add __bpf_prog_{enter,exit}_struct_ops for struct_ops trampoline")
removed prog->active check for struct_ops prog. The bpf_lsm
and bpf_iter is also using trampoline. Like struct_ops, the bpf_lsm
and bpf_iter have fixed hooks for the prog to attach. The
kernel does not call the same hook in a recursive way.
This patch also removes the prog->active check for
bpf_lsm and bpf_iter.
A later patch has a test to reproduce the recursion issue
for a sleepable bpf_lsm program.
This patch appends the '_recur' naming to the existing
enter and exit functions that track the prog->active counter.
New __bpf_prog_{enter,exit}[_sleepable] function are
added to skip the prog->active tracking. The '_struct_ops'
version is also removed.
It also moves the decision on picking the enter and exit function to
the new bpf_trampoline_{enter,exit}(). It returns the '_recur' ones
for all tracing progs to use. For bpf_lsm, bpf_iter,
struct_ops (no prog->active tracking after
64696c40d03c), and
bpf_lsm_cgroup (no prog->active tracking after
69fd337a975c7),
it will return the functions that don't track the prog->active.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20221025184524.3526117-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of:
7645629f7dc8 ("bpf: Invoke __bpf_prog_exit_sleepable_recur() on recursion in kern_sys_bpf().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Oltean [Tue, 5 Sep 2023 21:53:38 +0000 (00:53 +0300)]
net: dsa: sja1105: complete tc-cbs offload support on SJA1110
[ Upstream commit
180a7419fe4adc8d9c8e0ef0fd17bcdd0cf78acd ]
The blamed commit left this delta behind:
struct sja1105_cbs_entry {
- u64 port;
- u64 prio;
+ u64 port; /* Not used for SJA1110 */
+ u64 prio; /* Not used for SJA1110 */
u64 credit_hi;
u64 credit_lo;
u64 send_slope;
u64 idle_slope;
};
but did not actually implement tc-cbs offload fully for the new switch.
The offload is accepted, but it doesn't work.
The difference compared to earlier switch generations is that now, the
table of CBS shapers is sparse, because there are many more shapers, so
the mapping between a {port, prio} and a table index is static, rather
than requiring us to store the port and prio into the sja1105_cbs_entry.
So, the problem is that the code programs the CBS shaper parameters at a
dynamic table index which is incorrect.
All that needs to be done for SJA1110 CBS shapers to work is to bypass
the logic which allocates shapers in a dense manner, as for SJA1105, and
use the fixed mapping instead.
Fixes:
3e77e59bf8cf ("net: dsa: sja1105: add support for the SJA1110 switch family")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Oltean [Tue, 5 Sep 2023 21:53:37 +0000 (00:53 +0300)]
net: dsa: sja1105: fix -ENOSPC when replacing the same tc-cbs too many times
[ Upstream commit
894cafc5c62ccced758077bd4e970dc714c42637 ]
After running command [2] too many times in a row:
[1] $ tc qdisc add dev sw2p0 root handle 1: mqprio num_tc 8 \
map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0
[2] $ tc qdisc replace dev sw2p0 parent 1:1 cbs offload 1 \
idleslope 120000 sendslope -880000 locredit -1320 hicredit 180
(aka more than priv->info->num_cbs_shapers times)
we start seeing the following error message:
Error: Specified device failed to setup cbs hardware offload.
This comes from the fact that ndo_setup_tc(TC_SETUP_QDISC_CBS) presents
the same API for the qdisc create and replace cases, and the sja1105
driver fails to distinguish between the 2. Thus, it always thinks that
it must allocate the same shaper for a {port, queue} pair, when it may
instead have to replace an existing one.
Fixes:
4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Oltean [Tue, 5 Sep 2023 21:53:36 +0000 (00:53 +0300)]
net: dsa: sja1105: fix bandwidth discrepancy between tc-cbs software and offload
[ Upstream commit
954ad9bf13c4f95a4958b5f8433301f2ab99e1f5 ]
More careful measurement of the tc-cbs bandwidth shows that the stream
bandwidth (effectively idleslope) increases, there is a larger and
larger discrepancy between the rate limit obtained by the software
Qdisc, and the rate limit obtained by its offloaded counterpart.
The discrepancy becomes so large, that e.g. at an idleslope of 40000
(40Mbps), the offloaded cbs does not actually rate limit anything, and
traffic will pass at line rate through a 100 Mbps port.
The reason for the discrepancy is that the hardware documentation I've
been following is incorrect. UM11040.pdf (for SJA1105P/Q/R/S) states
about IDLE_SLOPE that it is "the rate (in unit of bytes/sec) at which
the credit counter is increased".
Cross-checking with UM10944.pdf (for SJA1105E/T) and UM11107.pdf
(for SJA1110), the wording is different: "This field specifies the
value, in bytes per second times link speed, by which the credit counter
is increased".
So there's an extra scaling for link speed that the driver is currently
not accounting for, and apparently (empirically), that link speed is
expressed in Kbps.
I've pondered whether to pollute the sja1105_mac_link_up()
implementation with CBS shaper reprogramming, but I don't think it is
worth it. IMO, the UAPI exposed by tc-cbs requires user space to
recalculate the sendslope anyway, since the formula for that depends on
port_transmit_rate (see man tc-cbs), which is not an invariant from tc's
perspective.
So we use the offload->sendslope and offload->idleslope to deduce the
original port_transmit_rate from the CBS formula, and use that value to
scale the offload->sendslope and offload->idleslope to values that the
hardware understands.
Some numerical data points:
40Mbps stream, max interfering frame size 1500, port speed 100M
---------------------------------------------------------------
tc-cbs parameters:
idleslope 40000 sendslope -60000 locredit -900 hicredit 600
which result in hardware values:
Before (doesn't work) After (works)
credit_hi 600 600
credit_lo 900 900
send_slope 7500000 75
idle_slope 5000000 50
40Mbps stream, max interfering frame size 1500, port speed 1G
-------------------------------------------------------------
tc-cbs parameters:
idleslope 40000 sendslope -960000 locredit -1440 hicredit 60
which result in hardware values:
Before (doesn't work) After (works)
credit_hi 60 60
credit_lo 1440 1440
send_slope
120000000 120
idle_slope 5000000 5
5.12Mbps stream, max interfering frame size 1522, port speed 100M
-----------------------------------------------------------------
tc-cbs parameters:
idleslope 5120 sendslope -94880 locredit -1444 hicredit 77
which result in hardware values:
Before (doesn't work) After (works)
credit_hi 77 77
credit_lo 1444 1444
send_slope
11860000 118
idle_slope 640000 6
Tested on SJA1105T, SJA1105S and SJA1110A, at 1Gbps and 100Mbps.
Fixes:
4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc")
Reported-by: Yanan Yang <yanan.yang@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Tue, 5 Sep 2023 13:40:46 +0000 (13:40 +0000)]
ip_tunnels: use DEV_STATS_INC()
[ Upstream commit
9b271ebaf9a2c5c566a54bc6cd915962e8241130 ]
syzbot/KCSAN reported data-races in iptunnel_xmit_stats() [1]
This can run from multiple cpus without mutual exclusion.
Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.
[1]
BUG: KCSAN: data-race in iptunnel_xmit / iptunnel_xmit
read-write to 0xffff8881353df170 of 8 bytes by task 30263 on cpu 1:
iptunnel_xmit_stats include/net/ip_tunnels.h:493 [inline]
iptunnel_xmit+0x432/0x4a0 net/ipv4/ip_tunnel_core.c:87
ip_tunnel_xmit+0x1477/0x1750 net/ipv4/ip_tunnel.c:831
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:662
__netdev_start_xmit include/linux/netdevice.h:4889 [inline]
netdev_start_xmit include/linux/netdevice.h:4903 [inline]
xmit_one net/core/dev.c:3544 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560
__dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
__bpf_tx_skb net/core/filter.c:2129 [inline]
__bpf_redirect_no_mac net/core/filter.c:2159 [inline]
__bpf_redirect+0x723/0x9c0 net/core/filter.c:2182
____bpf_clone_redirect net/core/filter.c:2453 [inline]
bpf_clone_redirect+0x16c/0x1d0 net/core/filter.c:2425
___bpf_prog_run+0xd7d/0x41e0 kernel/bpf/core.c:1954
__bpf_prog_run512+0x74/0xa0 kernel/bpf/core.c:2195
bpf_dispatcher_nop_func include/linux/bpf.h:1181 [inline]
__bpf_prog_run include/linux/filter.h:609 [inline]
bpf_prog_run include/linux/filter.h:616 [inline]
bpf_test_run+0x15d/0x3d0 net/bpf/test_run.c:423
bpf_prog_test_run_skb+0x77b/0xa00 net/bpf/test_run.c:1045
bpf_prog_test_run+0x265/0x3d0 kernel/bpf/syscall.c:3996
__sys_bpf+0x3af/0x780 kernel/bpf/syscall.c:5353
__do_sys_bpf kernel/bpf/syscall.c:5439 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5437 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5437
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read-write to 0xffff8881353df170 of 8 bytes by task 30249 on cpu 0:
iptunnel_xmit_stats include/net/ip_tunnels.h:493 [inline]
iptunnel_xmit+0x432/0x4a0 net/ipv4/ip_tunnel_core.c:87
ip_tunnel_xmit+0x1477/0x1750 net/ipv4/ip_tunnel.c:831
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:662
__netdev_start_xmit include/linux/netdevice.h:4889 [inline]
netdev_start_xmit include/linux/netdevice.h:4903 [inline]
xmit_one net/core/dev.c:3544 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560
__dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
__bpf_tx_skb net/core/filter.c:2129 [inline]
__bpf_redirect_no_mac net/core/filter.c:2159 [inline]
__bpf_redirect+0x723/0x9c0 net/core/filter.c:2182
____bpf_clone_redirect net/core/filter.c:2453 [inline]
bpf_clone_redirect+0x16c/0x1d0 net/core/filter.c:2425
___bpf_prog_run+0xd7d/0x41e0 kernel/bpf/core.c:1954
__bpf_prog_run512+0x74/0xa0 kernel/bpf/core.c:2195
bpf_dispatcher_nop_func include/linux/bpf.h:1181 [inline]
__bpf_prog_run include/linux/filter.h:609 [inline]
bpf_prog_run include/linux/filter.h:616 [inline]
bpf_test_run+0x15d/0x3d0 net/bpf/test_run.c:423
bpf_prog_test_run_skb+0x77b/0xa00 net/bpf/test_run.c:1045
bpf_prog_test_run+0x265/0x3d0 kernel/bpf/syscall.c:3996
__sys_bpf+0x3af/0x780 kernel/bpf/syscall.c:5353
__do_sys_bpf kernel/bpf/syscall.c:5439 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5437 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5437
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x0000000000018830 -> 0x0000000000018831
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 30249 Comm: syz-executor.4 Not tainted 6.5.0-syzkaller-11704-g3f86ed6ec0b3 #0
Fixes:
039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ariel Marcovitch [Sat, 26 Aug 2023 17:33:17 +0000 (20:33 +0300)]
idr: fix param name in idr_alloc_cyclic() doc
[ Upstream commit
2a15de80dd0f7e04a823291aa9eb49c5294f56af ]
The relevant parameter is 'start' and not 'nextid'
Fixes:
460488c58ca8 ("idr: Remove idr_alloc_ext")
Signed-off-by: Ariel Marcovitch <arielmarcovitch@gmail.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Thu, 31 Aug 2023 10:59:59 +0000 (13:59 +0300)]
s390/zcrypt: don't leak memory if dev_set_name() fails
[ Upstream commit
6252f47b78031979ad919f971dc8468b893488bd ]
When dev_set_name() fails, zcdn_create() doesn't free the newly
allocated resources. Do it.
Fixes:
00fab2350e6b ("s390/zcrypt: multiple zcrypt device nodes support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230831110000.24279-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Olga Zaborska [Tue, 25 Jul 2023 08:10:58 +0000 (10:10 +0200)]
igb: Change IGB_MIN to allow set rx/tx value between 64 and 80
[ Upstream commit
6319685bdc8ad5310890add907b7c42f89302886 ]
Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igb devices can use as low as 64 descriptors.
This change will unify igb with other drivers.
Based on commit
7b1be1987c1e ("e1000e: lower ring minimum size to 64")
Fixes:
9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Olga Zaborska <olga.zaborska@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Olga Zaborska [Tue, 25 Jul 2023 08:10:57 +0000 (10:10 +0200)]
igbvf: Change IGBVF_MIN to allow set rx/tx value between 64 and 80
[ Upstream commit
8360717524a24a421c36ef8eb512406dbd42160a ]
Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igbvf devices can use as low as 64 descriptors.
This change will unify igbvf with other drivers.
Based on commit
7b1be1987c1e ("e1000e: lower ring minimum size to 64")
Fixes:
d4e0fe01a38a ("igbvf: add new driver to support 82576 virtual functions")
Signed-off-by: Olga Zaborska <olga.zaborska@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Olga Zaborska [Tue, 25 Jul 2023 08:10:56 +0000 (10:10 +0200)]
igc: Change IGC_MIN to allow set rx/tx value between 64 and 80
[ Upstream commit
5aa48279712e1f134aac908acde4df798955a955 ]
Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igc devices can use as low as 64 descriptors.
This change will unify igc with other drivers.
Based on commit
7b1be1987c1e ("e1000e: lower ring minimum size to 64")
Fixes:
0507ef8a0372 ("igc: Add transmit and receive fastpath and interrupt handlers")
Signed-off-by: Olga Zaborska <olga.zaborska@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geetha sowjanya [Tue, 5 Sep 2023 06:48:16 +0000 (12:18 +0530)]
octeontx2-af: Fix truncation of smq in CN10K NIX AQ enqueue mbox handler
[ Upstream commit
29fe7a1b62717d58f033009874554d99d71f7d37 ]
The smq value used in the CN10K NIX AQ instruction enqueue mailbox
handler was truncated to 9-bit value from 10-bit value because of
typecasting the CN10K mbox request structure to the CN9K structure.
Though this hasn't caused any problems when programming the NIX SQ
context to the HW because the context structure is the same size.
However, this causes a problem when accessing the structure parameters.
This patch reads the right smq value for each platform.
Fixes:
30077d210c83 ("octeontx2-af: cn10k: Update NIX/NPA context structure")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shigeru Yoshida [Sat, 2 Sep 2023 17:07:08 +0000 (02:07 +0900)]
kcm: Destroy mutex in kcm_exit_net()
[ Upstream commit
6ad40b36cd3b04209e2d6c89d252c873d8082a59 ]
kcm_exit_net() should call mutex_destroy() on knet->mutex. This is especially
needed if CONFIG_DEBUG_MUTEXES is enabled.
Fixes:
ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20230902170708.1727999-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
valis [Fri, 1 Sep 2023 16:22:37 +0000 (12:22 -0400)]
net: sched: sch_qfq: Fix UAF in qfq_dequeue()
[ Upstream commit
8fc134fee27f2263988ae38920bc03da416b03d8 ]
When the plug qdisc is used as a class of the qfq qdisc it could trigger a
UAF. This issue can be reproduced with following commands:
tc qdisc add dev lo root handle 1: qfq
tc class add dev lo parent 1: classid 1:1 qfq weight 1 maxpkt 512
tc qdisc add dev lo parent 1:1 handle 2: plug
tc filter add dev lo parent 1: basic classid 1:1
ping -c1 127.0.0.1
and boom:
[ 285.353793] BUG: KASAN: slab-use-after-free in qfq_dequeue+0xa7/0x7f0
[ 285.354910] Read of size 4 at addr
ffff8880bad312a8 by task ping/144
[ 285.355903]
[ 285.356165] CPU: 1 PID: 144 Comm: ping Not tainted 6.5.0-rc3+ #4
[ 285.357112] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
[ 285.358376] Call Trace:
[ 285.358773] <IRQ>
[ 285.359109] dump_stack_lvl+0x44/0x60
[ 285.359708] print_address_description.constprop.0+0x2c/0x3c0
[ 285.360611] kasan_report+0x10c/0x120
[ 285.361195] ? qfq_dequeue+0xa7/0x7f0
[ 285.361780] qfq_dequeue+0xa7/0x7f0
[ 285.362342] __qdisc_run+0xf1/0x970
[ 285.362903] net_tx_action+0x28e/0x460
[ 285.363502] __do_softirq+0x11b/0x3de
[ 285.364097] do_softirq.part.0+0x72/0x90
[ 285.364721] </IRQ>
[ 285.365072] <TASK>
[ 285.365422] __local_bh_enable_ip+0x77/0x90
[ 285.366079] __dev_queue_xmit+0x95f/0x1550
[ 285.366732] ? __pfx_csum_and_copy_from_iter+0x10/0x10
[ 285.367526] ? __pfx___dev_queue_xmit+0x10/0x10
[ 285.368259] ? __build_skb_around+0x129/0x190
[ 285.368960] ? ip_generic_getfrag+0x12c/0x170
[ 285.369653] ? __pfx_ip_generic_getfrag+0x10/0x10
[ 285.370390] ? csum_partial+0x8/0x20
[ 285.370961] ? raw_getfrag+0xe5/0x140
[ 285.371559] ip_finish_output2+0x539/0xa40
[ 285.372222] ? __pfx_ip_finish_output2+0x10/0x10
[ 285.372954] ip_output+0x113/0x1e0
[ 285.373512] ? __pfx_ip_output+0x10/0x10
[ 285.374130] ? icmp_out_count+0x49/0x60
[ 285.374739] ? __pfx_ip_finish_output+0x10/0x10
[ 285.375457] ip_push_pending_frames+0xf3/0x100
[ 285.376173] raw_sendmsg+0xef5/0x12d0
[ 285.376760] ? do_syscall_64+0x40/0x90
[ 285.377359] ? __static_call_text_end+0x136578/0x136578
[ 285.378173] ? do_syscall_64+0x40/0x90
[ 285.378772] ? kasan_enable_current+0x11/0x20
[ 285.379469] ? __pfx_raw_sendmsg+0x10/0x10
[ 285.380137] ? __sock_create+0x13e/0x270
[ 285.380673] ? __sys_socket+0xf3/0x180
[ 285.381174] ? __x64_sys_socket+0x3d/0x50
[ 285.381725] ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 285.382425] ? __rcu_read_unlock+0x48/0x70
[ 285.382975] ? ip4_datagram_release_cb+0xd8/0x380
[ 285.383608] ? __pfx_ip4_datagram_release_cb+0x10/0x10
[ 285.384295] ? preempt_count_sub+0x14/0xc0
[ 285.384844] ? __list_del_entry_valid+0x76/0x140
[ 285.385467] ? _raw_spin_lock_bh+0x87/0xe0
[ 285.386014] ? __pfx__raw_spin_lock_bh+0x10/0x10
[ 285.386645] ? release_sock+0xa0/0xd0
[ 285.387148] ? preempt_count_sub+0x14/0xc0
[ 285.387712] ? freeze_secondary_cpus+0x348/0x3c0
[ 285.388341] ? aa_sk_perm+0x177/0x390
[ 285.388856] ? __pfx_aa_sk_perm+0x10/0x10
[ 285.389441] ? check_stack_object+0x22/0x70
[ 285.390032] ? inet_send_prepare+0x2f/0x120
[ 285.390603] ? __pfx_inet_sendmsg+0x10/0x10
[ 285.391172] sock_sendmsg+0xcc/0xe0
[ 285.391667] __sys_sendto+0x190/0x230
[ 285.392168] ? __pfx___sys_sendto+0x10/0x10
[ 285.392727] ? kvm_clock_get_cycles+0x14/0x30
[ 285.393328] ? set_normalized_timespec64+0x57/0x70
[ 285.393980] ? _raw_spin_unlock_irq+0x1b/0x40
[ 285.394578] ? __x64_sys_clock_gettime+0x11c/0x160
[ 285.395225] ? __pfx___x64_sys_clock_gettime+0x10/0x10
[ 285.395908] ? _copy_to_user+0x3e/0x60
[ 285.396432] ? exit_to_user_mode_prepare+0x1a/0x120
[ 285.397086] ? syscall_exit_to_user_mode+0x22/0x50
[ 285.397734] ? do_syscall_64+0x71/0x90
[ 285.398258] __x64_sys_sendto+0x74/0x90
[ 285.398786] do_syscall_64+0x64/0x90
[ 285.399273] ? exit_to_user_mode_prepare+0x1a/0x120
[ 285.399949] ? syscall_exit_to_user_mode+0x22/0x50
[ 285.400605] ? do_syscall_64+0x71/0x90
[ 285.401124] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 285.401807] RIP: 0033:0x495726
[ 285.402233] Code: ff ff ff f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 09
[ 285.404683] RSP: 002b:
00007ffcc25fb618 EFLAGS:
00000246 ORIG_RAX:
000000000000002c
[ 285.405677] RAX:
ffffffffffffffda RBX:
0000000000000040 RCX:
0000000000495726
[ 285.406628] RDX:
0000000000000040 RSI:
0000000002518750 RDI:
0000000000000000
[ 285.407565] RBP:
00000000005205ef R08:
00000000005f8838 R09:
000000000000001c
[ 285.408523] R10:
0000000000000000 R11:
0000000000000246 R12:
0000000002517634
[ 285.409460] R13:
00007ffcc25fb6f0 R14:
0000000000000003 R15:
0000000000000000
[ 285.410403] </TASK>
[ 285.410704]
[ 285.410929] Allocated by task 144:
[ 285.411402] kasan_save_stack+0x1e/0x40
[ 285.411926] kasan_set_track+0x21/0x30
[ 285.412442] __kasan_slab_alloc+0x55/0x70
[ 285.412973] kmem_cache_alloc_node+0x187/0x3d0
[ 285.413567] __alloc_skb+0x1b4/0x230
[ 285.414060] __ip_append_data+0x17f7/0x1b60
[ 285.414633] ip_append_data+0x97/0xf0
[ 285.415144] raw_sendmsg+0x5a8/0x12d0
[ 285.415640] sock_sendmsg+0xcc/0xe0
[ 285.416117] __sys_sendto+0x190/0x230
[ 285.416626] __x64_sys_sendto+0x74/0x90
[ 285.417145] do_syscall_64+0x64/0x90
[ 285.417624] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 285.418306]
[ 285.418531] Freed by task 144:
[ 285.418960] kasan_save_stack+0x1e/0x40
[ 285.419469] kasan_set_track+0x21/0x30
[ 285.419988] kasan_save_free_info+0x27/0x40
[ 285.420556] ____kasan_slab_free+0x109/0x1a0
[ 285.421146] kmem_cache_free+0x1c2/0x450
[ 285.421680] __netif_receive_skb_core+0x2ce/0x1870
[ 285.422333] __netif_receive_skb_one_core+0x97/0x140
[ 285.423003] process_backlog+0x100/0x2f0
[ 285.423537] __napi_poll+0x5c/0x2d0
[ 285.424023] net_rx_action+0x2be/0x560
[ 285.424510] __do_softirq+0x11b/0x3de
[ 285.425034]
[ 285.425254] The buggy address belongs to the object at
ffff8880bad31280
[ 285.425254] which belongs to the cache skbuff_head_cache of size 224
[ 285.426993] The buggy address is located 40 bytes inside of
[ 285.426993] freed 224-byte region [
ffff8880bad31280,
ffff8880bad31360)
[ 285.428572]
[ 285.428798] The buggy address belongs to the physical page:
[ 285.429540] page:
00000000f4b77674 refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0xbad31
[ 285.430758] flags: 0x100000000000200(slab|node=0|zone=1)
[ 285.431447] page_type: 0xffffffff()
[ 285.431934] raw:
0100000000000200 ffff88810094a8c0 dead000000000122 0000000000000000
[ 285.432757] raw:
0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
[ 285.433562] page dumped because: kasan: bad access detected
[ 285.434144]
[ 285.434320] Memory state around the buggy address:
[ 285.434828]
ffff8880bad31180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 285.435580]
ffff8880bad31200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 285.436264] >
ffff8880bad31280: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 285.436777] ^
[ 285.437106]
ffff8880bad31300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 285.437616]
ffff8880bad31380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 285.438126] ==================================================================
[ 285.438662] Disabling lock debugging due to kernel taint
Fix this by:
1. Changing sch_plug's .peek handler to qdisc_peek_dequeued(), a
function compatible with non-work-conserving qdiscs
2. Checking the return value of qdisc_dequeue_peeked() in sch_qfq.
Fixes:
462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Reported-by: valis <sec@valis.email>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230901162237.11525-1-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Sat, 2 Sep 2023 00:27:08 +0000 (17:27 -0700)]
af_unix: Fix data race around sk->sk_err.
[ Upstream commit
b192812905e4b134f7b7994b079eb647e9d2d37e ]
As with sk->sk_shutdown shown in the previous patch, sk->sk_err can be
read locklessly by unix_dgram_sendmsg().
Let's use READ_ONCE() for sk_err as well.
Note that the writer side is marked by commit
cc04410af7de ("af_unix:
annotate lockless accesses to sk->sk_err").
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Sat, 2 Sep 2023 00:27:07 +0000 (17:27 -0700)]
af_unix: Fix data-races around sk->sk_shutdown.
[ Upstream commit
afe8764f76346ba838d4f162883e23d2fcfaa90e ]
sk->sk_shutdown is changed under unix_state_lock(sk), but
unix_dgram_sendmsg() calls two functions to read sk_shutdown locklessly.
sock_alloc_send_pskb
`- sock_wait_for_wmem
Let's use READ_ONCE() there.
Note that the writer side was marked by commit
e1d09c2c2f57 ("af_unix:
Fix data races around sk->sk_shutdown.").
BUG: KCSAN: data-race in sock_alloc_send_pskb / unix_release_sock
write (marked) to 0xffff8880069af12c of 1 bytes by task 1 on cpu 1:
unix_release_sock+0x75c/0x910 net/unix/af_unix.c:631
unix_release+0x59/0x80 net/unix/af_unix.c:1053
__sock_release+0x7d/0x170 net/socket.c:654
sock_close+0x19/0x30 net/socket.c:1386
__fput+0x2a3/0x680 fs/file_table.c:384
____fput+0x15/0x20 fs/file_table.c:412
task_work_run+0x116/0x1a0 kernel/task_work.c:179
resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204
__syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline]
syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297
do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
read to 0xffff8880069af12c of 1 bytes by task 28650 on cpu 0:
sock_alloc_send_pskb+0xd2/0x620 net/core/sock.c:2767
unix_dgram_sendmsg+0x2f8/0x14f0 net/unix/af_unix.c:1944
unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline]
unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg+0x148/0x160 net/socket.c:748
____sys_sendmsg+0x4e4/0x610 net/socket.c:2494
___sys_sendmsg+0xc6/0x140 net/socket.c:2548
__sys_sendmsg+0x94/0x140 net/socket.c:2577
__do_sys_sendmsg net/socket.c:2586 [inline]
__se_sys_sendmsg net/socket.c:2584 [inline]
__x64_sys_sendmsg+0x45/0x50 net/socket.c:2584
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
value changed: 0x00 -> 0x03
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 28650 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Sat, 2 Sep 2023 00:27:06 +0000 (17:27 -0700)]
af_unix: Fix data-race around unix_tot_inflight.
[ Upstream commit
ade32bd8a738d7497ffe9743c46728db26740f78 ]
unix_tot_inflight is changed under spin_lock(unix_gc_lock), but
unix_release_sock() reads it locklessly.
Let's use READ_ONCE() for unix_tot_inflight.
Note that the writer side was marked by commit
9d6d7f1cb67c ("af_unix:
annote lockless accesses to unix_tot_inflight & gc_in_progress")
BUG: KCSAN: data-race in unix_inflight / unix_release_sock
write (marked) to 0xffffffff871852b8 of 4 bytes by task 123 on cpu 1:
unix_inflight+0x130/0x180 net/unix/scm.c:64
unix_attach_fds+0x137/0x1b0 net/unix/scm.c:123
unix_scm_to_skb net/unix/af_unix.c:1832 [inline]
unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1955
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg+0x148/0x160 net/socket.c:747
____sys_sendmsg+0x4e4/0x610 net/socket.c:2493
___sys_sendmsg+0xc6/0x140 net/socket.c:2547
__sys_sendmsg+0x94/0x140 net/socket.c:2576
__do_sys_sendmsg net/socket.c:2585 [inline]
__se_sys_sendmsg net/socket.c:2583 [inline]
__x64_sys_sendmsg+0x45/0x50 net/socket.c:2583
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
read to 0xffffffff871852b8 of 4 bytes by task 4891 on cpu 0:
unix_release_sock+0x608/0x910 net/unix/af_unix.c:671
unix_release+0x59/0x80 net/unix/af_unix.c:1058
__sock_release+0x7d/0x170 net/socket.c:653
sock_close+0x19/0x30 net/socket.c:1385
__fput+0x179/0x5e0 fs/file_table.c:321
____fput+0x15/0x20 fs/file_table.c:349
task_work_run+0x116/0x1a0 kernel/task_work.c:179
resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204
__syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline]
syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297
do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x72/0xdc
value changed: 0x00000000 -> 0x00000001
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 4891 Comm: systemd-coredum Not tainted 6.4.0-rc5-01219-gfa0e21fa4443 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Fixes:
9305cfa4443d ("[AF_UNIX]: Make unix_tot_inflight counter non-atomic")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Sat, 2 Sep 2023 00:27:05 +0000 (17:27 -0700)]
af_unix: Fix data-races around user->unix_inflight.
[ Upstream commit
0bc36c0650b21df36fbec8136add83936eaf0607 ]
user->unix_inflight is changed under spin_lock(unix_gc_lock),
but too_many_unix_fds() reads it locklessly.
Let's annotate the write/read accesses to user->unix_inflight.
BUG: KCSAN: data-race in unix_attach_fds / unix_inflight
write to 0xffffffff8546f2d0 of 8 bytes by task 44798 on cpu 1:
unix_inflight+0x157/0x180 net/unix/scm.c:66
unix_attach_fds+0x147/0x1e0 net/unix/scm.c:123
unix_scm_to_skb net/unix/af_unix.c:1827 [inline]
unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950
unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline]
unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg+0x148/0x160 net/socket.c:748
____sys_sendmsg+0x4e4/0x610 net/socket.c:2494
___sys_sendmsg+0xc6/0x140 net/socket.c:2548
__sys_sendmsg+0x94/0x140 net/socket.c:2577
__do_sys_sendmsg net/socket.c:2586 [inline]
__se_sys_sendmsg net/socket.c:2584 [inline]
__x64_sys_sendmsg+0x45/0x50 net/socket.c:2584
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
read to 0xffffffff8546f2d0 of 8 bytes by task 44814 on cpu 0:
too_many_unix_fds net/unix/scm.c:101 [inline]
unix_attach_fds+0x54/0x1e0 net/unix/scm.c:110
unix_scm_to_skb net/unix/af_unix.c:1827 [inline]
unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950
unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline]
unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg+0x148/0x160 net/socket.c:748
____sys_sendmsg+0x4e4/0x610 net/socket.c:2494
___sys_sendmsg+0xc6/0x140 net/socket.c:2548
__sys_sendmsg+0x94/0x140 net/socket.c:2577
__do_sys_sendmsg net/socket.c:2586 [inline]
__se_sys_sendmsg net/socket.c:2584 [inline]
__x64_sys_sendmsg+0x45/0x50 net/socket.c:2584
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
value changed: 0x000000000000000c -> 0x000000000000000d
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 44814 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Fixes:
712f4aad406b ("unix: properly account for FDs passed over unix sockets")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Fastabend [Fri, 1 Sep 2023 20:21:37 +0000 (13:21 -0700)]
bpf, sockmap: Fix skb refcnt race after locking changes
[ Upstream commit
a454d84ee20baf7bd7be90721b9821f73c7d23d9 ]
There is a race where skb's from the sk_psock_backlog can be referenced
after userspace side has already skb_consumed() the sk_buff and its refcnt
dropped to zer0 causing use after free.
The flow is the following:
while ((skb = skb_peek(&psock->ingress_skb))
sk_psock_handle_Skb(psock, skb, ..., ingress)
if (!ingress) ...
sk_psock_skb_ingress
sk_psock_skb_ingress_enqueue(skb)
msg->skb = skb
sk_psock_queue_msg(psock, msg)
skb_dequeue(&psock->ingress_skb)
The sk_psock_queue_msg() puts the msg on the ingress_msg queue. This is
what the application reads when recvmsg() is called. An application can
read this anytime after the msg is placed on the queue. The recvmsg hook
will also read msg->skb and then after user space reads the msg will call
consume_skb(skb) on it effectively free'ing it.
But, the race is in above where backlog queue still has a reference to
the skb and calls skb_dequeue(). If the skb_dequeue happens after the
user reads and free's the skb we have a use after free.
The !ingress case does not suffer from this problem because it uses
sendmsg_*(sk, msg) which does not pass the sk_buff further down the
stack.
The following splat was observed with 'test_progs -t sockmap_listen':
[ 1022.710250][ T2556] general protection fault, ...
[...]
[ 1022.712830][ T2556] Workqueue: events sk_psock_backlog
[ 1022.713262][ T2556] RIP: 0010:skb_dequeue+0x4c/0x80
[ 1022.713653][ T2556] Code: ...
[...]
[ 1022.720699][ T2556] Call Trace:
[ 1022.720984][ T2556] <TASK>
[ 1022.721254][ T2556] ? die_addr+0x32/0x80^M
[ 1022.721589][ T2556] ? exc_general_protection+0x25a/0x4b0
[ 1022.722026][ T2556] ? asm_exc_general_protection+0x22/0x30
[ 1022.722489][ T2556] ? skb_dequeue+0x4c/0x80
[ 1022.722854][ T2556] sk_psock_backlog+0x27a/0x300
[ 1022.723243][ T2556] process_one_work+0x2a7/0x5b0
[ 1022.723633][ T2556] worker_thread+0x4f/0x3a0
[ 1022.723998][ T2556] ? __pfx_worker_thread+0x10/0x10
[ 1022.724386][ T2556] kthread+0xfd/0x130
[ 1022.724709][ T2556] ? __pfx_kthread+0x10/0x10
[ 1022.725066][ T2556] ret_from_fork+0x2d/0x50
[ 1022.725409][ T2556] ? __pfx_kthread+0x10/0x10
[ 1022.725799][ T2556] ret_from_fork_asm+0x1b/0x30
[ 1022.726201][ T2556] </TASK>
To fix we add an skb_get() before passing the skb to be enqueued in the
engress queue. This bumps the skb->users refcnt so that consume_skb()
and kfree_skb will not immediately free the sk_buff. With this we can
be sure the skb is still around when we do the dequeue. Then we just
need to decrement the refcnt or free the skb in the backlog case which
we do by calling kfree_skb() on the ingress case as well as the sendmsg
case.
Before locking change from fixes tag we had the sock locked so we
couldn't race with user and there was no issue here.
Fixes:
799aa7f98d53e ("skmsg: Avoid lock_sock() in sk_psock_backlog()")
Reported-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Xu Kuohai <xukuohai@huawei.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230901202137.214666-1-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Oleksij Rempel [Fri, 1 Sep 2023 04:53:23 +0000 (06:53 +0200)]
net: phy: micrel: Correct bit assignments for phy_device flags
[ Upstream commit
719c5e37e99d2fd588d1c994284d17650a66354c ]
Previously, the defines for phy_device flags in the Micrel driver were
ambiguous in their representation. They were intended to be bit masks
but were mistakenly defined as bit positions. This led to the following
issues:
- MICREL_KSZ8_P1_ERRATA, designated for KSZ88xx switches, overlapped
with MICREL_PHY_FXEN and MICREL_PHY_50MHZ_CLK.
- Due to this overlap, the code path for MICREL_PHY_FXEN, tailored for
the KSZ8041 PHY, was not executed for KSZ88xx PHYs.
- Similarly, the code associated with MICREL_PHY_50MHZ_CLK wasn't
triggered for KSZ88xx.
To rectify this, all three flags have now been explicitly converted to
use the `BIT()` macro, ensuring they are defined as bit masks and
preventing potential overlaps in the future.
Fixes:
49011e0c1555 ("net: phy: micrel: ksz886x/ksz8081: add cabletest support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Henrie [Fri, 1 Sep 2023 04:41:27 +0000 (22:41 -0600)]
net: ipv6/addrconf: avoid integer underflow in ipv6_create_tempaddr
[ Upstream commit
f31867d0d9d82af757c1e0178b659438f4c1ea3c ]
The existing code incorrectly casted a negative value (the result of a
subtraction) to an unsigned value without checking. For example, if
/proc/sys/net/ipv6/conf/*/temp_prefered_lft was set to 1, the preferred
lifetime would jump to 4 billion seconds. On my machine and network the
shortest lifetime that avoided underflow was 3 seconds.
Fixes:
76506a986dc3 ("IPv6: fix DESYNC_FACTOR")
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liang Chen [Fri, 1 Sep 2023 04:09:21 +0000 (12:09 +0800)]
veth: Fixing transmit return status for dropped packets
[ Upstream commit
151e887d8ff97e2e42110ffa1fb1e6a2128fb364 ]
The veth_xmit function returns NETDEV_TX_OK even when packets are dropped.
This behavior leads to incorrect calculations of statistics counts, as
well as things like txq->trans_start updates.
Fixes:
e314dbdc1c0d ("[NET]: Virtual ethernet device driver.")
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Thu, 31 Aug 2023 21:38:12 +0000 (21:38 +0000)]
gve: fix frag_list chaining
[ Upstream commit
817c7cd2043a83a3d8147f40eea1505ac7300b62 ]
gve_rx_append_frags() is able to build skbs chained with frag_list,
like GRO engine.
Problem is that shinfo->frag_list should only be used
for the head of the chain.
All other links should use skb->next pointer.
Otherwise, built skbs are not valid and can cause crashes.
Equivalent code in GRO (skb_gro_receive()) is:
if (NAPI_GRO_CB(p)->last == p)
skb_shinfo(p)->frag_list = skb;
else
NAPI_GRO_CB(p)->last->next = skb;
NAPI_GRO_CB(p)->last = skb;
Fixes:
9b8dd5e5ea48 ("gve: DQO: Add RX path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Bailey Forrest <bcf@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Catherine Sullivan <csully@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corinna Vinschen [Thu, 31 Aug 2023 12:19:13 +0000 (14:19 +0200)]
igb: disable virtualization features on 82580
[ Upstream commit
fa09bc40b21a33937872c4c4cf0f266ec9fa4869 ]
Disable virtualization features on 82580 just as on i210/i211.
This avoids that virt functions are acidentally called on 82850.
Fixes:
55cac248caa4 ("igb: Add full support for 82580 devices")
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sriram Yagnaraman [Thu, 31 Aug 2023 08:03:31 +0000 (10:03 +0200)]
ipv6: ignore dst hint for multipath routes
[ Upstream commit
8423be8926aa82cd2e28bba5cc96ccb72c7ce6be ]
Route hints when the nexthop is part of a multipath group causes packets
in the same receive batch to be sent to the same nexthop irrespective of
the multipath hash of the packet. So, do not extract route hint for
packets whose destination is part of a multipath group.
A new SKB flag IP6SKB_MULTIPATH is introduced for this purpose, set the
flag when route is looked up in fib6_select_path() and use it in
ip6_can_use_hint() to check for the existence of the flag.
Fixes:
197dbf24e360 ("ipv6: introduce and uses route look hints for list input.")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sriram Yagnaraman [Thu, 31 Aug 2023 08:03:30 +0000 (10:03 +0200)]
ipv4: ignore dst hint for multipath routes
[ Upstream commit
6ac66cb03ae306c2e288a9be18226310529f5b25 ]
Route hints when the nexthop is part of a multipath group causes packets
in the same receive batch to be sent to the same nexthop irrespective of
the multipath hash of the packet. So, do not extract route hint for
packets whose destination is part of a multipath group.
A new SKB flag IPSKB_MULTIPATH is introduced for this purpose, set the
flag when route is looked up in ip_mkroute_input() and use it in
ip_extract_route_hint() to check for the existence of the flag.
Fixes:
02b24941619f ("ipv4: use dst hint for ipv4 list receive")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Thu, 31 Aug 2023 13:52:10 +0000 (13:52 +0000)]
mptcp: annotate data-races around msk->rmem_fwd_alloc
[ Upstream commit
9531e4a83febc3fb47ac77e24cfb5ea97e50034d ]
msk->rmem_fwd_alloc can be read locklessly.
Add mptcp_rmem_fwd_alloc_add(), similar to sk_forward_alloc_add(),
and appropriate READ_ONCE()/WRITE_ONCE() annotations.
Fixes:
6511882cdd82 ("mptcp: allocate fwd memory separately on the rx and tx path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Thu, 31 Aug 2023 13:52:09 +0000 (13:52 +0000)]
net: annotate data-races around sk->sk_forward_alloc
[ Upstream commit
5e6300e7b3a4ab5b72a82079753868e91fbf9efc ]
Every time sk->sk_forward_alloc is read locklessly,
add a READ_ONCE().
Add sk_forward_alloc_add() helper to centralize updates,
to reduce number of WRITE_ONCE().
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Thu, 31 Aug 2023 13:52:08 +0000 (13:52 +0000)]
net: use sk_forward_alloc_get() in sk_get_meminfo()
[ Upstream commit
66d58f046c9d3a8f996b7138d02e965fd0617de0 ]
inet_sk_diag_fill() has been changed to use sk_forward_alloc_get(),
but sk_get_meminfo() was forgotten.
Fixes:
292e6077b040 ("net: introduce sk_forward_alloc_get()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Christopherson [Sat, 29 Jul 2023 01:35:16 +0000 (18:35 -0700)]
drm/i915/gvt: Drop unused helper intel_vgpu_reset_gtt()
[ Upstream commit
a90c367e5af63880008e21dd199dac839e0e9e0f ]
Drop intel_vgpu_reset_gtt() as it no longer has any callers. In addition
to eliminating dead code, this eliminates the last possible scenario where
__kvmgt_protect_table_find() can be reached without holding vgpu_lock.
Requiring vgpu_lock to be held when calling __kvmgt_protect_table_find()
will allow a protecting the gfn hash with vgpu_lock without too much fuss.
No functional change intended.
Fixes:
ba25d977571e ("drm/i915/gvt: Do not destroy ppgtt_mm during vGPU D3->D0.")
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Link: https://lore.kernel.org/r/20230729013535.1070024-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Christopherson [Sat, 29 Jul 2023 01:35:11 +0000 (18:35 -0700)]
drm/i915/gvt: Put the page reference obtained by KVM's gfn_to_pfn()
[ Upstream commit
708e49583d7da863898b25dafe4bcd799c414278 ]
Put the struct page reference acquired by gfn_to_pfn(), KVM's API is that
the caller is ultimately responsible for dropping any reference.
Note, kvm_release_pfn_clean() ensures the pfn is actually a refcounted
struct page before trying to put any references.
Fixes:
b901b252b6cf ("drm/i915/gvt: Add 2M huge gtt support")
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Link: https://lore.kernel.org/r/20230729013535.1070024-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Christopherson [Sat, 29 Jul 2023 01:35:07 +0000 (18:35 -0700)]
drm/i915/gvt: Verify pfn is "valid" before dereferencing "struct page"
[ Upstream commit
f046923af79158361295ed4f0a588c80b9fdcc1d ]
Check that the pfn found by gfn_to_pfn() is actually backed by "struct
page" memory prior to retrieving and dereferencing the page. KVM
supports backing guest memory with VM_PFNMAP, VM_IO, etc., and so
there is no guarantee the pfn returned by gfn_to_pfn() has an associated
"struct page".
Fixes:
b901b252b6cf ("drm/i915/gvt: Add 2M huge gtt support")
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Link: https://lore.kernel.org/r/20230729013535.1070024-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Magnus Karlsson [Thu, 31 Aug 2023 10:01:17 +0000 (12:01 +0200)]
xsk: Fix xsk_diag use-after-free error during socket cleanup
[ Upstream commit
3e019d8a05a38abb5c85d4f1e85fda964610aa14 ]
Fix a use-after-free error that is possible if the xsk_diag interface
is used after the socket has been unbound from the device. This can
happen either due to the socket being closed or the device
disappearing. In the early days of AF_XDP, the way we tested that a
socket was not bound to a device was to simply check if the netdevice
pointer in the xsk socket structure was NULL. Later, a better system
was introduced by having an explicit state variable in the xsk socket
struct. For example, the state of a socket that is on the way to being
closed and has been unbound from the device is XSK_UNBOUND.
The commit in the Fixes tag below deleted the old way of signalling
that a socket is unbound, setting dev to NULL. This in the belief that
all code using the old way had been exterminated. That was
unfortunately not true as the xsk diagnostics code was still using the
old way and thus does not work as intended when a socket is going
down. Fix this by introducing a test against the state variable. If
the socket is in the state XSK_UNBOUND, simply abort the diagnostic's
netlink operation.
Fixes:
18b1ab7aa76b ("xsk: Fix race at socket teardown")
Reported-by: syzbot+822d1359297e2694f873@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+822d1359297e2694f873@syzkaller.appspotmail.com
Tested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230831100119.17408-1-magnus.karlsson@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Westphal [Wed, 30 Aug 2023 11:00:37 +0000 (13:00 +0200)]
net: fib: avoid warn splat in flow dissector
[ Upstream commit
8aae7625ff3f0bd5484d01f1b8d5af82e44bec2d ]
New skbs allocated via nf_send_reset() have skb->dev == NULL.
fib*_rules_early_flow_dissect helpers already have a 'struct net'
argument but its not passed down to the flow dissector core, which
will then WARN as it can't derive a net namespace to use:
WARNING: CPU: 0 PID: 0 at net/core/flow_dissector.c:1016 __skb_flow_dissect+0xa91/0x1cd0
[..]
ip_route_me_harder+0x143/0x330
nf_send_reset+0x17c/0x2d0 [nf_reject_ipv4]
nft_reject_inet_eval+0xa9/0xf2 [nft_reject_inet]
nft_do_chain+0x198/0x5d0 [nf_tables]
nft_do_chain_inet+0xa4/0x110 [nf_tables]
nf_hook_slow+0x41/0xc0
ip_local_deliver+0xce/0x110
..
Cc: Stanislav Fomichev <sdf@google.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Ido Schimmel <idosch@nvidia.com>
Fixes:
812fa71f0d96 ("netfilter: Dissect flow after packet mangling")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217826
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230830110043.30497-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Wed, 30 Aug 2023 10:12:44 +0000 (10:12 +0000)]
net: read sk->sk_family once in sk_mc_loop()
[ Upstream commit
a3e0fdf71bbe031de845e8e08ed7fba49f9c702c ]
syzbot is playing with IPV6_ADDRFORM quite a lot these days,
and managed to hit the WARN_ON_ONCE(1) in sk_mc_loop()
We have many more similar issues to fix.
WARNING: CPU: 1 PID: 1593 at net/core/sock.c:782 sk_mc_loop+0x165/0x260
Modules linked in:
CPU: 1 PID: 1593 Comm: kworker/1:3 Not tainted 6.1.40-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
Workqueue: events_power_efficient gc_worker
RIP: 0010:sk_mc_loop+0x165/0x260 net/core/sock.c:782
Code: 34 1b fd 49 81 c7 18 05 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 20 00 74 08 4c 89 ff e8 25 36 6d fd 4d 8b 37 eb 13 e8 db 33 1b fd <0f> 0b b3 01 eb 34 e8 d0 33 1b fd 45 31 f6 49 83 c6 38 4c 89 f0 48
RSP: 0018:
ffffc90000388530 EFLAGS:
00010246
RAX:
ffffffff846d9b55 RBX:
0000000000000011 RCX:
ffff88814f884980
RDX:
0000000000000102 RSI:
ffffffff87ae5160 RDI:
0000000000000011
RBP:
ffffc90000388550 R08:
0000000000000003 R09:
ffffffff846d9a65
R10:
0000000000000002 R11:
ffff88814f884980 R12:
dffffc0000000000
R13:
ffff88810dbee000 R14:
0000000000000010 R15:
ffff888150084000
FS:
0000000000000000(0000) GS:
ffff8881f6b00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000020000180 CR3:
000000014ee5b000 CR4:
00000000003506e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<IRQ>
[<
ffffffff8507734f>] ip6_finish_output2+0x33f/0x1ae0 net/ipv6/ip6_output.c:83
[<
ffffffff85062766>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline]
[<
ffffffff85062766>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211
[<
ffffffff85061f8c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline]
[<
ffffffff85061f8c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232
[<
ffffffff852071cf>] dst_output include/net/dst.h:444 [inline]
[<
ffffffff852071cf>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161
[<
ffffffff83618fb4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline]
[<
ffffffff83618fb4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline]
[<
ffffffff83618fb4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
[<
ffffffff83618fb4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677
[<
ffffffff8361ddd9>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229
[<
ffffffff84763fc0>] netdev_start_xmit include/linux/netdevice.h:4925 [inline]
[<
ffffffff84763fc0>] xmit_one net/core/dev.c:3644 [inline]
[<
ffffffff84763fc0>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660
[<
ffffffff8494c650>] sch_direct_xmit+0x2a0/0x9c0 net/sched/sch_generic.c:342
[<
ffffffff8494d883>] qdisc_restart net/sched/sch_generic.c:407 [inline]
[<
ffffffff8494d883>] __qdisc_run+0xb13/0x1e70 net/sched/sch_generic.c:415
[<
ffffffff8478c426>] qdisc_run+0xd6/0x260 include/net/pkt_sched.h:125
[<
ffffffff84796eac>] net_tx_action+0x7ac/0x940 net/core/dev.c:5247
[<
ffffffff858002bd>] __do_softirq+0x2bd/0x9bd kernel/softirq.c:599
[<
ffffffff814c3fe8>] invoke_softirq kernel/softirq.c:430 [inline]
[<
ffffffff814c3fe8>] __irq_exit_rcu+0xc8/0x170 kernel/softirq.c:683
[<
ffffffff814c3f09>] irq_exit_rcu+0x9/0x20 kernel/softirq.c:695
Fixes:
7ad6848c7e81 ("ip: fix mc_loop checks for tunnels with multicast outer addresses")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230830101244.1146934-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Wed, 30 Aug 2023 09:55:20 +0000 (09:55 +0000)]
ipv4: annotate data-races around fi->fib_dead
[ Upstream commit
fce92af1c29d90184dfec638b5738831097d66e9 ]
syzbot complained about a data-race in fib_table_lookup() [1]
Add appropriate annotations to document it.
[1]
BUG: KCSAN: data-race in fib_release_info / fib_table_lookup
write to 0xffff888150f31744 of 1 bytes by task 1189 on cpu 0:
fib_release_info+0x3a0/0x460 net/ipv4/fib_semantics.c:281
fib_table_delete+0x8d2/0x900 net/ipv4/fib_trie.c:1777
fib_magic+0x1c1/0x1f0 net/ipv4/fib_frontend.c:1106
fib_del_ifaddr+0x8cf/0xa60 net/ipv4/fib_frontend.c:1317
fib_inetaddr_event+0x77/0x200 net/ipv4/fib_frontend.c:1448
notifier_call_chain kernel/notifier.c:93 [inline]
blocking_notifier_call_chain+0x90/0x200 kernel/notifier.c:388
__inet_del_ifa+0x4df/0x800 net/ipv4/devinet.c:432
inet_del_ifa net/ipv4/devinet.c:469 [inline]
inetdev_destroy net/ipv4/devinet.c:322 [inline]
inetdev_event+0x553/0xaf0 net/ipv4/devinet.c:1606
notifier_call_chain kernel/notifier.c:93 [inline]
raw_notifier_call_chain+0x6b/0x1c0 kernel/notifier.c:461
call_netdevice_notifiers_info net/core/dev.c:1962 [inline]
call_netdevice_notifiers_mtu+0xd2/0x130 net/core/dev.c:2037
dev_set_mtu_ext+0x30b/0x3e0 net/core/dev.c:8673
do_setlink+0x5be/0x2430 net/core/rtnetlink.c:2837
rtnl_setlink+0x255/0x300 net/core/rtnetlink.c:3177
rtnetlink_rcv_msg+0x807/0x8c0 net/core/rtnetlink.c:6445
netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2549
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6463
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1914
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
sock_write_iter+0x1aa/0x230 net/socket.c:1129
do_iter_write+0x4b4/0x7b0 fs/read_write.c:860
vfs_writev+0x1a8/0x320 fs/read_write.c:933
do_writev+0xf8/0x220 fs/read_write.c:976
__do_sys_writev fs/read_write.c:1049 [inline]
__se_sys_writev fs/read_write.c:1046 [inline]
__x64_sys_writev+0x45/0x50 fs/read_write.c:1046
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff888150f31744 of 1 bytes by task 21839 on cpu 1:
fib_table_lookup+0x2bf/0xd50 net/ipv4/fib_trie.c:1585
fib_lookup include/net/ip_fib.h:383 [inline]
ip_route_output_key_hash_rcu+0x38c/0x12c0 net/ipv4/route.c:2751
ip_route_output_key_hash net/ipv4/route.c:2641 [inline]
__ip_route_output_key include/net/route.h:134 [inline]
ip_route_output_flow+0xa6/0x150 net/ipv4/route.c:2869
send4+0x1e7/0x500 drivers/net/wireguard/socket.c:61
wg_socket_send_skb_to_peer+0x94/0x130 drivers/net/wireguard/socket.c:175
wg_socket_send_buffer_to_peer+0xd6/0x100 drivers/net/wireguard/socket.c:200
wg_packet_send_handshake_initiation drivers/net/wireguard/send.c:40 [inline]
wg_packet_handshake_send_worker+0x10c/0x150 drivers/net/wireguard/send.c:51
process_one_work+0x434/0x860 kernel/workqueue.c:2600
worker_thread+0x5f2/0xa10 kernel/workqueue.c:2751
kthread+0x1d7/0x210 kernel/kthread.c:389
ret_from_fork+0x2e/0x40 arch/x86/kernel/process.c:145
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
value changed: 0x00 -> 0x01
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 21839 Comm: kworker/u4:18 Tainted: G W 6.5.0-syzkaller #0
Fixes:
dccd9ecc3744 ("ipv4: Do not use dead fib_info entries.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230830095520.1046984-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Wed, 30 Aug 2023 09:45:19 +0000 (09:45 +0000)]
sctp: annotate data-races around sk->sk_wmem_queued
[ Upstream commit
dc9511dd6f37fe803f6b15b61b030728d7057417 ]
sk->sk_wmem_queued can be read locklessly from sctp_poll()
Use sk_wmem_queued_add() when the field is changed,
and add READ_ONCE() annotations in sctp_writeable()
and sctp_assocs_seq_show()
syzbot reported:
BUG: KCSAN: data-race in sctp_poll / sctp_wfree
read-write to 0xffff888149d77810 of 4 bytes by interrupt on cpu 0:
sctp_wfree+0x170/0x4a0 net/sctp/socket.c:9147
skb_release_head_state+0xb7/0x1a0 net/core/skbuff.c:988
skb_release_all net/core/skbuff.c:1000 [inline]
__kfree_skb+0x16/0x140 net/core/skbuff.c:1016
consume_skb+0x57/0x180 net/core/skbuff.c:1232
sctp_chunk_destroy net/sctp/sm_make_chunk.c:1503 [inline]
sctp_chunk_put+0xcd/0x130 net/sctp/sm_make_chunk.c:1530
sctp_datamsg_put+0x29a/0x300 net/sctp/chunk.c:128
sctp_chunk_free+0x34/0x50 net/sctp/sm_make_chunk.c:1515
sctp_outq_sack+0xafa/0xd70 net/sctp/outqueue.c:1381
sctp_cmd_process_sack net/sctp/sm_sideeffect.c:834 [inline]
sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1366 [inline]
sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline]
sctp_do_sm+0x12c7/0x31b0 net/sctp/sm_sideeffect.c:1169
sctp_assoc_bh_rcv+0x2b2/0x430 net/sctp/associola.c:1051
sctp_inq_push+0x108/0x120 net/sctp/inqueue.c:80
sctp_rcv+0x116e/0x1340 net/sctp/input.c:243
sctp6_rcv+0x25/0x40 net/sctp/ipv6.c:1120
ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437
ip6_input_finish net/ipv6/ip6_input.c:482 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491
dst_input include/net/dst.h:468 [inline]
ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:303 [inline]
ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5452 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566
process_backlog+0x21f/0x380 net/core/dev.c:5894
__napi_poll+0x60/0x3b0 net/core/dev.c:6460
napi_poll net/core/dev.c:6527 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6660
__do_softirq+0xc1/0x265 kernel/softirq.c:553
run_ksoftirqd+0x17/0x20 kernel/softirq.c:921
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:389
ret_from_fork+0x2e/0x40 arch/x86/kernel/process.c:145
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
read to 0xffff888149d77810 of 4 bytes by task 17828 on cpu 1:
sctp_writeable net/sctp/socket.c:9304 [inline]
sctp_poll+0x265/0x410 net/sctp/socket.c:8671
sock_poll+0x253/0x270 net/socket.c:1374
vfs_poll include/linux/poll.h:88 [inline]
do_pollfd fs/select.c:873 [inline]
do_poll fs/select.c:921 [inline]
do_sys_poll+0x636/0xc00 fs/select.c:1015
__do_sys_ppoll fs/select.c:1121 [inline]
__se_sys_ppoll+0x1af/0x1f0 fs/select.c:1101
__x64_sys_ppoll+0x67/0x80 fs/select.c:1101
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x00019e80 -> 0x0000cc80
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 17828 Comm: syz-executor.1 Not tainted 6.5.0-rc7-syzkaller-00185-g28f20a19294d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20230830094519.950007-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Tue, 29 Aug 2023 12:35:41 +0000 (12:35 +0000)]
net/sched: fq_pie: avoid stalls in fq_pie_timer()
[ Upstream commit
8c21ab1bae945686c602c5bfa4e3f3352c2452c5 ]
When setting a high number of flows (limit being 65536),
fq_pie_timer() is currently using too much time as syzbot reported.
Add logic to yield the cpu every 2048 flows (less than 150 usec
on debug kernels).
It should also help by not blocking qdisc fast paths for too long.
Worst case (65536 flows) would need 31 jiffies for a complete scan.
Relevant extract from syzbot report:
rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 0-.... } 2663 jiffies s: 873 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug):
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 5177 Comm: syz-executor273 Not tainted 6.5.0-syzkaller-00453-g727dbda16b83 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
RIP: 0010:check_kcov_mode kernel/kcov.c:173 [inline]
RIP: 0010:write_comp_data+0x21/0x90 kernel/kcov.c:236
Code: 2e 0f 1f 84 00 00 00 00 00 65 8b 05 01 b2 7d 7e 49 89 f1 89 c6 49 89 d2 81 e6 00 01 00 00 49 89 f8 65 48 8b 14 25 80 b9 03 00 <a9> 00 01 ff 00 74 0e 85 f6 74 59 8b 82 04 16 00 00 85 c0 74 4f 8b
RSP: 0018:
ffffc90000007bb8 EFLAGS:
00000206
RAX:
0000000000000101 RBX:
ffffc9000dc0d140 RCX:
ffffffff885893b0
RDX:
ffff88807c075940 RSI:
0000000000000100 RDI:
0000000000000001
RBP:
0000000000000000 R08:
0000000000000001 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
ffffc9000dc0d178
R13:
0000000000000000 R14:
0000000000000000 R15:
0000000000000000
FS:
0000555555d54380(0000) GS:
ffff8880b9800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f6b442f6130 CR3:
000000006fe1c000 CR4:
00000000003506f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<NMI>
</NMI>
<IRQ>
pie_calculate_probability+0x480/0x850 net/sched/sch_pie.c:415
fq_pie_timer+0x1da/0x4f0 net/sched/sch_fq_pie.c:387
call_timer_fn+0x1a0/0x580 kernel/time/timer.c:1700
Fixes:
ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler")
Link: https://lore.kernel.org/lkml/00000000000017ad3f06040bf394@google.com/
Reported-by: syzbot+e46fbd5289363464bc13@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230829123541.3745013-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Katya Orlova [Tue, 15 Aug 2023 13:38:31 +0000 (16:38 +0300)]
smb: propagate error code of extract_sharename()
[ Upstream commit
efc0b0bcffcba60d9c6301063d25a22a4744b499 ]
In addition to the EINVAL, there may be an ENOMEM.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes:
70431bfd825d ("cifs: Support fscache indexing rewrite")
Signed-off-by: Katya Orlova <e.orlova@ispras.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paulo Alcantara [Tue, 4 Oct 2022 21:41:20 +0000 (18:41 -0300)]
cifs: use fs_context for automounts
[ Upstream commit
9fd29a5bae6e8f94b410374099a6fddb253d2d5f ]
Use filesystem context support to handle dfs links.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of:
efc0b0bcffcb ("smb: propagate error code of extract_sharename()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yu Kuai [Wed, 16 Aug 2023 01:27:08 +0000 (09:27 +0800)]
blk-throttle: consider 'carryover_ios/bytes' in throtl_trim_slice()
[ Upstream commit
eead0056648cef49d7b15c07ae612fa217083165 ]
Currently, 'carryover_ios/bytes' is not handled in throtl_trim_slice(),
for consequence, 'carryover_ios/bytes' will be used to throttle bio
multiple times, for example:
1) set iops limit to 100, and slice start is 0, slice end is 100ms;
2) current time is 0, and 10 ios are dispatched, those io won't be
throttled and io_disp is 10;
3) still at current time 0, update iops limit to 1000, carryover_ios is
updated to (0 - 10) = -10;
4) in this slice(0 - 100ms), io_allowed = 100 + (-10) = 90, which means
only 90 ios can be dispatched without waiting;
5) assume that io is throttled in slice(0 - 100ms), and
throtl_trim_slice() update silce to (100ms - 200ms). In this case,
'carryover_ios/bytes' is not cleared and still only 90 ios can be
dispatched between 100ms - 200ms.
Fix this problem by updating 'carryover_ios/bytes' in
throtl_trim_slice().
Fixes:
a880ae93e5b5 ("blk-throttle: fix io hung due to configuration updates")
Reported-by: zhuxiaohui <zhuxiaohui.400@bytedance.com>
Link: https://lore.kernel.org/all/20230812072116.42321-1-zhuxiaohui.400@bytedance.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230816012708.1193747-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yu Kuai [Wed, 16 Aug 2023 01:27:07 +0000 (09:27 +0800)]
blk-throttle: use calculate_io/bytes_allowed() for throtl_trim_slice()
[ Upstream commit
e8368b57c006dc0e02dcd8a9dc9f2060ff5476fe ]
There are no functional changes, just make the code cleaner.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230816012708.1193747-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of:
eead0056648c ("blk-throttle: consider 'carryover_ios/bytes' in throtl_trim_slice()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrzej Hajda [Mon, 21 Aug 2023 15:30:35 +0000 (17:30 +0200)]
drm/i915: mark requests for GuC virtual engines to avoid use-after-free
[ Upstream commit
5eefc5307c983b59344a4cb89009819f580c84fa ]
References to i915_requests may be trapped by userspace inside a
sync_file or dmabuf (dma-resv) and held indefinitely across different
proceses. To counter-act the memory leaks, we try to not to keep
references from the request past their completion.
On the other side on fence release we need to know if rq->engine
is valid and points to hw engine (true for non-virtual requests).
To make it possible extra bit has been added to rq->execution_mask,
for marking virtual engines.
Fixes:
bcb9aa45d5a0 ("Revert "drm/i915: Hold reference to intel_context over life of i915_request"")
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821153035.3903006-1-andrzej.hajda@intel.com
(cherry picked from commit
280410677af763f3871b93e794a199cfcf6fb580)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Namhyung Kim [Fri, 25 Aug 2023 16:41:52 +0000 (09:41 -0700)]
perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test
[ Upstream commit
a84260e314029e6dc9904fd6eabf8d9fd7965351 ]
It has system-wide test and cpu-list test but the cpu-list test fails
sometimes. It runs sleep command on CPU1 and measure both user.slice
and system.slice cgroups by default (on systemd-based systems).
But if the system was idle enough, sometime the system.slice gets no
count and it makes the test failing. Maybe that's because it only looks
at the CPU1, let's add CPU0 to increase the chance it finds some tasks.
Fixes:
7901086014bbaa3a ("perf test: Add a new test for perf stat cgroup BPF counter")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230825164152.165610-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kajol Jain [Sun, 9 Jul 2023 18:27:39 +0000 (23:57 +0530)]
perf test stat_bpf_counters_cgrp: Fix shellcheck issue about logical operators
[ Upstream commit
0dd1f815545d7210150642741c364521cc5cf116 ]
Running shellcheck on lock_contention.sh generates below warning:
In stat_bpf_counters_cgrp.sh line 28:
if [ -d /sys/fs/cgroup/system.slice -a -d /sys/fs/cgroup/user.slice ]; then
^-- SC2166 (warning): Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
In stat_bpf_counters_cgrp.sh line 34:
local self_cgrp=$(grep perf_event /proc/self/cgroup | cut -d: -f3)
^-------------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
^-------^ SC2155 (warning): Declare and assign separately to avoid masking return values.
^-- SC2046 (warning): Quote this to prevent word splitting.
In stat_bpf_counters_cgrp.sh line 51:
local output
^----------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
In stat_bpf_counters_cgrp.sh line 65:
local output
^----------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
Fixed above warnings by:
- Changing the expression [p -a q] to [p] && [q].
- Fixing shellcheck warnings for local usage, by prefixing
function name to the variable.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-6-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of:
a84260e31402 ("perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Zapolskiy [Mon, 17 Jul 2023 15:52:57 +0000 (17:52 +0200)]
pwm: lpc32xx: Remove handling of PWM channels
[ Upstream commit
4aae44f65827f0213a7361cf9c32cfe06114473f ]
Because LPC32xx PWM controllers have only a single output which is
registered as the only PWM device/channel per controller, it is known in
advance that pwm->hwpwm value is always 0. On basis of this fact
simplify the code by removing operations with pwm->hwpwm, there is no
controls which require channel number as input.
Even though I wasn't aware at the time when I forward ported that patch,
this fixes a null pointer dereference as lpc32xx->chip.pwms is NULL
before devm_pwmchip_add() is called.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes:
3d2813fb17e5 ("pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was registered")
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Raag Jadav [Fri, 11 Aug 2023 12:02:20 +0000 (17:32 +0530)]
watchdog: intel-mid_wdt: add MODULE_ALIAS() to allow auto-load
[ Upstream commit
cf38e7691c85f1b09973b22a0b89bf1e1228d2f9 ]
When built with CONFIG_INTEL_MID_WATCHDOG=m, currently the driver
needs to be loaded manually, for the lack of module alias.
This causes unintended resets in cases where watchdog timer is
set-up by bootloader and the driver is not explicitly loaded.
Add MODULE_ALIAS() to load the driver automatically at boot and
avoid this issue.
Fixes:
87a1ef8058d9 ("watchdog: add Intel MID watchdog driver support")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230811120220.31578-1-raag.jadav@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnaldo Carvalho de Melo [Thu, 17 Aug 2023 12:11:21 +0000 (09:11 -0300)]
perf top: Don't pass an ERR_PTR() directly to perf_session__delete()
[ Upstream commit
ef23cb593304bde0cc046fd4cc83ae7ea2e24f16 ]
While debugging a segfault on 'perf lock contention' without an
available perf.data file I noticed that it was basically calling:
perf_session__delete(ERR_PTR(-1))
Resulting in:
(gdb) run lock contention
Starting program: /root/bin/perf lock contention
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
failed to open perf.data: No such file or directory (try 'perf record' first)
Initializing perf session failed
Program received signal SIGSEGV, Segmentation fault.
0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
2858 if (!session->auxtrace)
(gdb) p session
$1 = (struct perf_session *) 0xffffffffffffffff
(gdb) bt
#0 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
#1 0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300
#2 0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161
#3 0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604
#4 0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322
#5 0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375
#6 0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419
#7 0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535
(gdb)
So just set it to NULL after using PTR_ERR(session) to decode the error
as perf_session__delete(NULL) is supported.
The same problem was found in 'perf top' after an audit of all
perf_session__new() failure handling.
Fixes:
6ef81c55a2b6584c ("perf session: Return error code for perf_session__new() function on failure")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mukesh Ojha <mojha@codeaurora.org>
Cc: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Shawn Landden <shawn@git.icu>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: https://lore.kernel.org/lkml/ZN4Q2rxxsL08A8rd@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kajol Jain [Mon, 14 Aug 2023 11:27:59 +0000 (16:57 +0530)]
perf vendor events: Drop STORES_PER_INST metric event for power10 platform
[ Upstream commit
4836b9a85ef148c7c9779b66fab3f7279e488d90 ]
Drop STORES_PER_INST metric event for the power10 platform, as the
metric expression of STORES_PER_INST metric event using dropped event
PM_ST_FIN.
Fixes:
3ca3af7d1f230d1f ("perf vendor events power10: Add metric events JSON file for power10 platform")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230814112803.1508296-3-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kajol Jain [Mon, 14 Aug 2023 11:27:58 +0000 (16:57 +0530)]
perf vendor events: Drop some of the JSON/events for power10 platform
[ Upstream commit
e104df97b8dcfbab2e42de634b99bf03f0805d85 ]
Drop some of the JSON/events for power10 platform due to counter
data mismatch.
Fixes:
32daa5d7899e0343 ("perf vendor events: Initial JSON/events list for power10 platform")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230814112803.1508296-2-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kajol Jain [Mon, 14 Aug 2023 11:27:57 +0000 (16:57 +0530)]
perf vendor events: Update the JSON/events descriptions for power10 platform
[ Upstream commit
3286f88f31da060ac2789cee247153961ba57e49 ]
Update the description for some of the JSON/events for power10 platform.
Fixes:
32daa5d7899e0343 ("perf vendor events: Initial JSON/events list for power10 platform")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230814112803.1508296-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Christopherson [Fri, 21 Jul 2023 20:18:52 +0000 (13:18 -0700)]
x86/virt: Drop unnecessary check on extended CPUID level in cpu_has_svm()
[ Upstream commit
5df8ecfe3632d5879d1f154f7aa8de441b5d1c89 ]
Drop the explicit check on the extended CPUID level in cpu_has_svm(), the
kernel's cached CPUID info will leave the entire SVM leaf unset if said
leaf is not supported by hardware. Prior to using cached information,
the check was needed to avoid false positives due to Intel's rather crazy
CPUID behavior of returning the values of the maximum supported leaf if
the specified leaf is unsupported.
Fixes:
682a8108872f ("x86/kvm/svm: Simplify cpu_has_svm()")
Link: https://lore.kernel.org/r/20230721201859.2307736-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnaldo Carvalho de Melo [Wed, 2 Aug 2023 21:22:14 +0000 (18:22 -0300)]
perf annotate bpf: Don't enclose non-debug code with an assert()
[ Upstream commit
979e9c9fc9c2a761303585e07fe2699bdd88182f ]
In
616b14b47a86d880 ("perf build: Conditionally define NDEBUG") we
started using NDEBUG=1 when DEBUG=1 isn't present, so code that is
enclosed with assert() is not called.
In
dd317df072071903 ("perf build: Make binutil libraries opt in") we
stopped linking against binutils-devel, for licensing reasons.
Recently people asked me why annotation of BPF programs wasn't working,
i.e. this:
$ perf annotate bpf_prog_5280546344e3f45c_kfree_skb
was returning:
case SYMBOL_ANNOTATE_ERRNO__NO_LIBOPCODES_FOR_BPF:
scnprintf(buf, buflen, "Please link with binutils's libopcode to enable BPF annotation");
This was on a fedora rpm, so its new enough that I had to try to test by
rebuilding using BUILD_NONDISTRO=1, only to get it segfaulting on me.
This combination made this libopcode function not to be called:
assert(bfd_check_format(bfdf, bfd_object));
Changing it to:
if (!bfd_check_format(bfdf, bfd_object))
abort();
Made it work, looking at this "check" function made me realize it
changes the 'bfdf' internal state, i.e. we better call it.
So stop using assert() on it, just call it and abort if it fails.
Probably it is better to propagate the error, etc, but it seems it is
unlikely to fail from the usage done so far and we really need to stop
using libopcodes, so do the quick fix above and move on.
With it we have BPF annotation back working when built with
BUILD_NONDISTRO=1:
⬢[acme@toolbox perf-tools-next]$ perf annotate --stdio2 bpf_prog_5280546344e3f45c_kfree_skb | head
No kallsyms or vmlinux with build-id
939bc71a1a51cdc434e60af93c7e734f7d5c0e7e was found
Samples: 12 of event 'cpu-clock:ppp', 4000 Hz, Event count (approx.): 3000000, [percent: local period]
bpf_prog_5280546344e3f45c_kfree_skb() bpf_prog_5280546344e3f45c_kfree_skb
Percent int kfree_skb(struct trace_event_raw_kfree_skb *args) {
nop
33.33 xchg %ax,%ax
push %rbp
mov %rsp,%rbp
sub $0x180,%rsp
push %rbx
push %r13
⬢[acme@toolbox perf-tools-next]$
Fixes:
6987561c9e86eace ("perf annotate: Enable annotation of BPF programs")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mohamed Mahmoud <mmahmoud@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Dave Tucker <datucker@redhat.com>
Cc: Derek Barbosa <debarbos@redhat.com>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/lkml/ZMrMzoQBe0yqMek1@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Torokhov [Mon, 24 Jul 2023 05:30:20 +0000 (22:30 -0700)]
Input: tca6416-keypad - fix interrupt enable disbalance
[ Upstream commit
cc141c35af873c6796e043adcb820833bd8ef8c5 ]
The driver has been switched to use IRQF_NO_AUTOEN, but in the error
unwinding and remove paths calls to enable_irq() were left in place, which
will lead to an incorrect enable counter value.
Fixes:
bcd9730a04a1 ("Input: move to use request_irq by IRQF_NO_AUTOEN flag")
Link: https://lore.kernel.org/r/20230724053024.352054-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Torokhov [Mon, 24 Jul 2023 05:30:18 +0000 (22:30 -0700)]
Input: tca6416-keypad - always expect proper IRQ number in i2c client
[ Upstream commit
687fe7dfb736b03ab820d172ea5dbfc1ec447135 ]
Remove option having i2c client contain raw gpio number instead of proper
IRQ number. There are no users of this facility in mainline and it will
allow cleaning up the driver code with regard to wakeup handling, etc.
Link: https://lore.kernel.org/r/20230724053024.352054-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stable-dep-of:
cc141c35af87 ("Input: tca6416-keypad - fix interrupt enable disbalance")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ying Liu [Fri, 21 Jul 2023 09:29:03 +0000 (09:29 +0000)]
backlight: gpio_backlight: Drop output GPIO direction check for initial power state
[ Upstream commit
fe1328b5b2a087221e31da77e617f4c2b70f3b7f ]
So, let's drop output GPIO direction check and only check GPIO value to set
the initial power state.
Fixes:
706dc68102bc ("backlight: gpio: Explicitly set the direction of the GPIO")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230721093342.1532531-1-victor.liu@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Uwe Kleine-König [Wed, 19 Jul 2023 19:20:10 +0000 (21:20 +0200)]
pwm: atmel-tcb: Fix resource freeing in error path and remove
[ Upstream commit
c11622324c023415fb69196c5fc3782d2b8cced0 ]
Several resources were not freed in the error path and the remove
function. Add the forgotten items.
Fixes:
34cbcd72588f ("pwm: atmel-tcb: Add sama5d2 support")
Fixes:
061f8572a31c ("pwm: atmel-tcb: Switch to new binding")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Uwe Kleine-König [Wed, 19 Jul 2023 19:20:09 +0000 (21:20 +0200)]
pwm: atmel-tcb: Harmonize resource allocation order
[ Upstream commit
0323e8fedd1ef25342cf7abf3a2024f5670362b8 ]
Allocate driver data as first resource in the probe function. This way it
can be used during allocation of the other resources (instead of assigning
these to local variables first and update driver data only when it's
allocated). Also as driver data is allocated using a devm function this
should happen first to have the order of freeing resources in the error
path and the remove function in reverse.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Stable-dep-of:
c11622324c02 ("pwm: atmel-tcb: Fix resource freeing in error path and remove")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Uwe Kleine-König [Fri, 3 Mar 2023 18:54:17 +0000 (19:54 +0100)]
pwm: atmel-tcb: Convert to platform remove callback returning void
[ Upstream commit
9609284a76978daf53a54e05cff36873a75e4d13 ]
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Stable-dep-of:
c11622324c02 ("pwm: atmel-tcb: Fix resource freeing in error path and remove")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnaldo Carvalho de Melo [Wed, 19 Jul 2023 18:37:14 +0000 (15:37 -0300)]
perf trace: Really free the evsel->priv area
[ Upstream commit
7962ef13651a9163f07b530607392ea123482e8a ]
In
3cb4d5e00e037c70 ("perf trace: Free syscall tp fields in
evsel->priv") it only was freeing if strcmp(evsel->tp_format->system,
"syscalls") returned zero, while the corresponding initialization of
evsel->priv was being performed if it was _not_ zero, i.e. if the tp
system wasn't 'syscalls'.
Just stop looking for that and free it if evsel->priv was set, which
should be equivalent.
Also use the pre-existing evsel_trace__delete() function.
This resolves these leaks, detected with:
$ make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin
=================================================================
==481565==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097)
#1 0x987966 in zalloc (/home/acme/bin/perf+0x987966)
#2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307
#3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333
#4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458
#5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480
#6 0x540e8b in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3212
#7 0x540e8b in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891
#8 0x540e8b in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156
#9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323
#10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377
#11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421
#12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537
#13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f)
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097)
#1 0x987966 in zalloc (/home/acme/bin/perf+0x987966)
#2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307
#3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333
#4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458
#5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480
#6 0x540dd1 in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3205
#7 0x540dd1 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891
#8 0x540dd1 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156
#9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323
#10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377
#11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421
#12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537
#13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f)
SUMMARY: AddressSanitizer: 80 byte(s) leaked in 2 allocation(s).
[root@quaco ~]#
With this we plug all leaks with "perf trace sleep 1".
Fixes:
3cb4d5e00e037c70 ("perf trace: Free syscall tp fields in evsel->priv")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Link: https://lore.kernel.org/lkml/20230719202951.534582-5-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnaldo Carvalho de Melo [Wed, 12 Apr 2023 12:50:08 +0000 (09:50 -0300)]
perf trace: Use zfree() to reduce chances of use after free
[ Upstream commit
9997d5dd177c52017fa0541bf236a4232c8148e6 ]
Do defensive programming by using zfree() to initialize freed pointers
to NULL, so that eventual use after free result in a NULL pointer deref
instead of more subtle behaviour.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of:
7962ef13651a ("perf trace: Really free the evsel->priv area")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeff LaBundy [Sun, 9 Jul 2023 17:06:37 +0000 (12:06 -0500)]
Input: iqs7222 - configure power mode before triggering ATI
[ Upstream commit
2e00b8bf5624767f6be7427b6eb532524793463e ]
If the device drops into ultra-low-power mode before being placed
into normal-power mode as part of ATI being triggered, the device
does not assert any interrupts until the ATI routine is restarted
two seconds later.
Solve this problem by adopting the vendor's recommendation, which
calls for the device to be placed into normal-power mode prior to
being configured and ATI being triggered.
The original implementation followed this sequence, but the order
was inadvertently changed as part of the resolution of a separate
erratum.
Fixes:
1e4189d8af27 ("Input: iqs7222 - protect volatile registers")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/ZKrpHc2Ji9qR25r2@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>