Liviu Dudau [Mon, 17 Sep 2018 16:50:00 +0000 (17:50 +0100)]
clk: Add support for Arm's Versatile Express OSC clock generators
The Arm Versatile Express and Juno development boards contain an
OSC clock generator that can be accessed through the Versatile
Express config bus. The generators are quite often being controlled
by some MCU and the config bus offers a uniform way of exposing them.
Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Neil Stainton [Wed, 12 Sep 2018 11:02:51 +0000 (11:02 +0000)]
cmd: env: Fix CRC calculation for 'env export -c -s'
Fix failure to reimport exported checksummed, size constrained data block.
'env export -c' command ignores optional -s size argument when calculating checksum causing subsequent 'env import -c' to fail.
Signed-off-by: Neil Stainton <nstainton@asl-control.co.uk>
Tom Rini [Sun, 30 Sep 2018 02:28:44 +0000 (22:28 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-video
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sat, 29 Sep 2018 15:48:02 +0000 (11:48 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-sunxi
Tom Rini [Sat, 29 Sep 2018 15:47:50 +0000 (11:47 -0400)]
Merge tag 'mpc85xx-for-v2018.11-rc1' of git://git.denx.de/u-boot-mpc85xx
Use device tree for mpc85xx with binman. Enabled for T2080QDS.
Tom Rini [Sat, 29 Sep 2018 15:47:32 +0000 (11:47 -0400)]
Merge tag 'fsl-qoriq-for-v2018.11-rc1' of git://git.denx.de/u-boot-fsl-qoriq
Switch to driver model for eSDHC on Layerscape SoCs including LS1021A,
LS1043A, LS1046A, LS1088A, LS2088A.
Switch to driver model for SATA on LS1021A and LS1043A.
Add support for LS1012AFRWY rev C board.
Enable SMMU for LS1043A.
Christian Gmeiner [Mon, 10 Sep 2018 10:43:16 +0000 (12:43 +0200)]
Convert CONFIG_DISABLE_CONSOLE to Kconfig
This converts the following to Kconfig:
CONFIG_DISABLE_CONSOLE
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Adam Ford [Wed, 19 Sep 2018 21:06:49 +0000 (16:06 -0500)]
ARM: da850evm_direct_nor_defconfig: Enable DM_SERIAL
With DM enabled, this patch enables DM_SERIAL and removes
the NS16550 initialization from da850_lowlevel since the driver
will take care of that itself.
Signed-off-by: Adam Ford <aford173@gmail.com>
Adam Ford [Wed, 12 Sep 2018 03:15:05 +0000 (22:15 -0500)]
ARM: omap3_logic: Remove non-DM MMC initialization
With DM_MMC working for both SPL and U-Boot, this patch removes
the legacy style of initializing the MMC driver.
Signed-off-by: Adam Ford <aford173@gmail.com>
Adam Ford [Sun, 9 Sep 2018 21:12:11 +0000 (16:12 -0500)]
ARM: omap3_logic: Remove some manual pin-muxing
With the pinctrl function enabled and the device tree setting up
the pins we want to use, this patch removes the manual pinmuxing
except for that which is not done by the device tree and minimal
pins necessary for SPL (like serial, GPMC, and MMC)
Signed-off-by: Adam Ford <aford173@gmail.com>
Adam Ford [Sun, 9 Sep 2018 14:21:21 +0000 (09:21 -0500)]
ARM: am3517_evm: Enable TCA6416PW GPIO Expander
With DM_I2C and DM_GPIO working, this patch can enable the
GPIO expander on the I2C bus. This GPIO expander is connected
to some of the DIP switches and can now read the status of these
pins.
Signed-off-by: Adam Ford <aford173@gmail.com>
Adam Ford [Sun, 9 Sep 2018 13:50:40 +0000 (08:50 -0500)]
ARM: da850evm: Pinctrl for da850evm
The simple pin controller works for da850, so this patch enables
this to pin-mux the pins defined in the device tree for the da850evm.
Signed-off-by: Adam Ford <aford173@gmail.com>
Adam Ford [Sun, 9 Sep 2018 13:50:39 +0000 (08:50 -0500)]
ARM: da850evm: Enable CMD_DM for da850evm
With DM enabled, this patch enables the 'dm' command to access
the dm tree, uclass and devres.
Signed-off-by: Adam Ford <aford173@gmail.com>
Adam Ford [Sun, 9 Sep 2018 12:25:30 +0000 (07:25 -0500)]
ARM: am3517_evm: Enable Pinctrl
The simple pinctrl driver currently available works with the omap3.
Enabling this will use the device tree to automatically set the
pin-muxing for various drivers.
Signed-off-by: Adam Ford <aford173@gmail.com>
Adam Ford [Sun, 9 Sep 2018 12:05:57 +0000 (07:05 -0500)]
cmd: Relocate poweroff under Device access commands
Previously poweroff was located under boot. It seems to make more
sense to have it located under the Device access commands.
Signed-off-by: Adam Ford <aford173@gmail.com>
Adam Ford [Sat, 8 Sep 2018 13:16:24 +0000 (08:16 -0500)]
ARM: DTS: various omap3: Remove cd-inverted from u-boot.dtsi
With the omap_mmc driver no longer supporting cd-inverted, this
patch removes all these references since they are not needed.
Signed-off-by: Adam Ford <aford173@gmail.com>
Adam Ford [Sat, 8 Sep 2018 13:16:23 +0000 (08:16 -0500)]
mmc: omap_mmc: Remove invert references
With DM_GPIO and DM_MMC translating GPIO_ACTIVE_LOW, any boards
using the 'cd-invert' option will no longer need to do this. This
patch removes the support for 'invert' from the MMC driver.
Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Fix warning over when !DM_GPIO]
Signed-off-by: Tom Rini <trini@konsulko.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:57 +0000 (10:35 +0300)]
ARM: dts: at91: sama5d4_xplained: add onewire connector for LCD eeprom
Add onewire node in device tree for TM series LCDs
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:56 +0000 (10:35 +0300)]
ARM: dts: at91: sama5d2_ptc: add onewire connector for LCD eeprom
Add onewire node in device tree for TM series LCDs
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:55 +0000 (10:35 +0300)]
ARM: dts: at91: sama5d27_som1_ek: add onewire connector for LCD eeprom
Add onewire node in device tree for TM series LCDs
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:54 +0000 (10:35 +0300)]
ARM: dts: at91: sama5d3_xplained: add onewire connector for LCD eeprom
Add onewire node in device tree for TM series LCDs
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:53 +0000 (10:35 +0300)]
ARM: dts: at91: sama5d2_xplained: add onewire connector for LCD eeprom
Add onewire node in device tree for TM series LCDs
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:52 +0000 (10:35 +0300)]
configs: sama5d4_xplained: add fdt overlay support
Add commands for fdt overlay merging. This is required for the boot scripts
that detect PDAs and apply specific overlays to the DTB passed on to kernel.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:51 +0000 (10:35 +0300)]
configs: sama5d27_som1_ek: add fdt overlay support
Add commands for fdt overlay merging. This is required for the boot scripts
that detect PDAs and apply specific overlays to the DTB passed on to kernel.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:50 +0000 (10:35 +0300)]
configs: sama5d2_ptc_ek: add fdt overlay support
Add commands for fdt overlay merging. This is required for the boot scripts
that detect PDAs and apply specific overlays to the DTB passed on to kernel.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:49 +0000 (10:35 +0300)]
configs: sama5d3_xplained: add fdt overlay support
Add commands for fdt overlay merging. This is required for the boot scripts
that detect PDAs and apply specific overlays to the DTB passed on to kernel.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:48 +0000 (10:35 +0300)]
configs: sama5d2_xplained: add fdt overlay support
Add commands for fdt overlay merging. This is required for the boot scripts
that detect PDAs and apply specific overlays to the DTB passed on to kernel.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:47 +0000 (10:35 +0300)]
board: sama5d4_xplained: add pda detect call at init time
Call the PDA detection mechanism at boot time so we can have
the pda environment variable ready for use.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:46 +0000 (10:35 +0300)]
board: sama5d2_ptc_ek: add pda detect call at init time
Call the PDA detection mechanism at boot time so we can have
the pda environment variable ready for use.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:45 +0000 (10:35 +0300)]
board: sama5d27_som1_ek: add pda detect call at init time
Call the PDA detection mechanism at boot time so we can have
the pda environment variable ready for use.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:44 +0000 (10:35 +0300)]
board: sama5d3_xplained: add pda detect call at init time
Call the PDA detection mechanism at boot time so we can have
the pda environment variable ready for use.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:43 +0000 (10:35 +0300)]
board: sama5d2_xplained: add pda detect call at init time
Call the PDA detection mechanism at boot time so we can have
the pda environment variable ready for use.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:42 +0000 (10:35 +0300)]
board: atmel: add support for pda detection
This adds the support for PDA detection as common code for
Atmel boards.
Using the one wire interface over GPIO , an EEPROM memory is read
and compared to preprogrammed values for PDA screens TM4300, TM7000
and TM7000B.
Once the PDA is detected, an environment variable is set accordingly.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:41 +0000 (10:35 +0300)]
configs: sama5d4_xplained: add onewire and eeprom drivers
SAMA5D4 SoC can have extra clip boards (PDAs) connected, which have
an EEPROM memory for identification. A special GPIO can be used to read
this memory over 1wire protocol.
Enabling one wire and eeprom drivers for this memory.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:40 +0000 (10:35 +0300)]
configs: sama5d2_ptc_ek: add onewire and eeprom drivers
SAMA5D2 SoC can have extra clip boards (PDAs) connected, which have
an EEPROM memory for identification. A special GPIO can be used to read
this memory over 1wire protocol.
Enabling one wire and eeprom drivers for this memory.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:39 +0000 (10:35 +0300)]
configs: sama5d27_som1_ek: add onewire and eeprom drivers
SAMA5D2 SoC can have extra clip boards (PDAs) connected, which have
an EEPROM memory for identification. A special GPIO can be used to read
this memory over 1wire protocol.
Enabling one wire and eeprom drivers for this memory.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:38 +0000 (10:35 +0300)]
configs: sama5d3_xplained: add onewire and eeprom drivers
SAMA5D3 SoC can have extra clip boards (PDAs) connected, which have
an EEPROM memory for identification. A special GPIO can be used to read
this memory over 1wire protocol.
Enabling one wire and eeprom drivers for this memory.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:37 +0000 (10:35 +0300)]
configs: sama5d2_xplained: add onewire and eeprom drivers
SAMA5D2 SoC can have extra clip boards (PDAs) connected, which have
an EEPROM memory for identification. A special GPIO can be used to read
this memory over 1wire protocol.
Enabling one wire and eeprom drivers for this memory.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:36 +0000 (10:35 +0300)]
configs: sandbox: add onewire w1 and sandbox eeprom
To be able to test Dallas onewire protocol and one wire eeproms driver
and subsystem, add in sandbox defconfig the drivers' config.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:35 +0000 (10:35 +0300)]
sandbox: DTS: w1: add node for one wire interface on GPIO
Add a node for the one wire uclass and one wire gpio driver
in sandbox.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:34 +0000 (10:35 +0300)]
pinctrl: sandbox: add gpio onewire w1 group
Add onewire "w1" groups and pin function for onewire GPIOs in sandbox.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:33 +0000 (10:35 +0300)]
w1: add command for onewire protocol
Add basic command for bus information and read for onewire
bus using Dallas 1-Wire protocol.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:32 +0000 (10:35 +0300)]
dt-bindings: w1-eeprom: eep_sandbox: create bindings
Bindings for sandbox onewire eeprom driver
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:31 +0000 (10:35 +0300)]
W1-EEPROM: add sandbox driver
Add a sandbox driver for a one wire EEPROM memory
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:30 +0000 (10:35 +0300)]
dt-bindings: w1-eeprom: ds24xxx: create bindings
Bindings for Maxim's ds24 onewire EEPROM families driver
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Maxime Ripard [Tue, 18 Sep 2018 07:35:29 +0000 (10:35 +0300)]
W1-EEPROM: add support for Maxim DS24 eeprom families
Add a driver that supports Maxim 1 wire EEPROMs families
DS24B33 and DS2431.
Can be extended for other families as well.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
[eugen.hristev@microchip.com: reworked driver]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:28 +0000 (10:35 +0300)]
w1: identify devices with w1-eeprom uclass
When a new device is discovered, this may be a w1 eeprom device.
Attempt to find the proper node and driver from the w1-eeprom subsystem.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Maxime Ripard [Tue, 18 Sep 2018 07:35:27 +0000 (10:35 +0300)]
W1-EEPROM: Add an W1-EEPROM uclass for 1 wire EEPROMs
We might want to access data stored onto one wire EEPROMs.
Create a framework to provide a consistent API.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
[eugen.hristev@microchip.com: reworked patch]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Eugen Hristev [Tue, 18 Sep 2018 07:35:26 +0000 (10:35 +0300)]
dt-bindings: W1: w1-gpio: added bindings for w1-gpio
Added bindings specification for bitbanged gpio driver for Dallas
one wire protocol
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Maxime Ripard [Tue, 18 Sep 2018 07:35:25 +0000 (10:35 +0300)]
w1: Add 1-Wire gpio driver
Add a bus driver for bitbanging a 1-Wire bus over a GPIO.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
[eugen.hristev@microchip.com: fixed some issues]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Maxime Ripard [Tue, 18 Sep 2018 07:35:24 +0000 (10:35 +0300)]
w1: Add 1-Wire uclass
We might want to use 1-Wire devices connected on boards such as EEPROMs in
U-Boot.
Provide a framework to be able to do that.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
[eugen.hristev@microchip.com: reworked]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Tien Fong Chee [Fri, 6 Jul 2018 08:28:03 +0000 (16:28 +0800)]
common: Generic loader for file system
This is file system generic loader which can be used to load
the file image from the storage into target such as memory.
The consumer driver would then use this loader to program whatever,
ie. the FPGA device.
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Tien Fong Chee [Fri, 6 Jul 2018 08:27:35 +0000 (16:27 +0800)]
doc: dtbinding: Add file system firmware loader binding document
Add a document to describe file system firmware loader binding
information.
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tien Fong Chee [Fri, 6 Jul 2018 08:27:08 +0000 (16:27 +0800)]
doc: Add new doc for file system firmware loader driver model
Provide information about
- overview of file system firmware loader driver model
- describe storage device and partition in device tree source
- describe fie system firmware loader API
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tien Fong Chee [Fri, 6 Jul 2018 08:26:36 +0000 (16:26 +0800)]
block: Add a function to find block device descriptor
Add a function to find the block device descriptor of the parent
device.
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
[trini: Move function declaration to avoid warning]
Signed-off-by: Tom Rini <trini@konsulko.com>
Tien Fong Chee [Fri, 6 Jul 2018 08:26:01 +0000 (16:26 +0800)]
cmd: ubifs: Factor out some checking codes into cmd_ubifs_mount()
cmd_ubifs_mount() function would be called directly instead of
involving whole command machinery for mounting ubifs in
generic firmware loader, so some checking codes need to be factored out
into cmd_ubifs_mount() without breaking original functionality design.
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
Tien Fong Chee [Fri, 6 Jul 2018 08:25:12 +0000 (16:25 +0800)]
cmd: ubifs: Move ubifs_initialized checking into cmd_ubifs_umount()
cmd_ubifs_umount() function would be called directly instead of involving
whole command machinery in generic firmware loader, so checking on
ubifs_initialized status need to be done in cmd_ubifs_umount() without
breaking original functionality design.
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
[trini: Fix conflicting type error in cmd/ubi.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
Liviu Dudau [Fri, 28 Sep 2018 12:50:53 +0000 (13:50 +0100)]
video: Add support for Arm's Mali Display Processors
Add support for Arm Mali Display Processors DP500, DP550 and DP650.
Only one layer is being used to display the console or boot logo,
even if more layers are supported in the hardware.
Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
Liviu Dudau [Fri, 28 Sep 2018 12:49:31 +0000 (13:49 +0100)]
video: Add support for NXP's TDA19988 HDMI encoder
Add support for the NXP TDA19988 HDMI encoder as used on the Juno
development board from Arm.
Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
Jagan Teki [Sat, 4 Aug 2018 19:10:11 +0000 (00:40 +0530)]
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3
Update all A23/A33/r16 devicetree dtsi and dtsi files from
Linux-v4.18-rc3 with below commits.
A23:
commit
bc3bd041fe766219a44688b182c260064007f0cc
Author: Miquel Raynal <miquel.raynal@bootlin.com>
Date: Tue Apr 24 17:55:02 2018 +0200
ARM: dts: sun8i: a23/a33: declare NAND pins
A33:
commit
88fe315d2c0a397ef42d7639addab0e021ae911d
Author: Maxime Ripard <maxime.ripard@bootlin.com>
Date: Wed Apr 4 11:57:15 2018 +0200
ARM: dts: sun8i: a33: Add the DSI-related nodes
r16:
commit
9621d0bd1b0d61167e1853ac68cf4869c31bcc96
Author: Miquel Raynal <miquel.raynal@bootlin.com>
Date: Tue Apr 24 17:55:03 2018 +0200
ARM: dts: nes: add Nintendo NES/SuperNES Classic Edition support
Note:
- Drop pinctrl from sun8i-r16-nintendo-nes-classic-edition.dts since
sun8i-a23-a33.dtsi is added with Linux sync.
- Don't sync non U-Boot supported dts files
sun8i-a23-ippo-q8h-v1.2.dts
sun8i-a23-ippo-q8h-v5.dts
sun8i-a33-et-q8-v1.6.dts
sun8i-a33-ippo-q8h-v1.2.dts
sun8i-r16-nintendo-nes-classic.dts
sun8i-r16-nintendo-super-nes-classic.dts
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki [Sat, 4 Aug 2018 19:10:10 +0000 (00:40 +0530)]
ARM: dts: sun7i: Update A20 dts(i) files from Linux-v4.18-rc3
Update all A10 devicetree dtsi and dtsi files from Linux-v4.18-rc3
with below commit:
commit
5d9ef839f874f4e3923c8a9ae7b136c6c3912cd5
Author: Stefan Mavrodiev <stefan@olimex.com>
Date: Wed May 16 14:38:08 2018 +0300
ARM: dts: sun7i: Add Olimex A20-SOM-EVB-eMMC board
Note:
- Update sun7i-a20-primo73.dts as per Linux, since
this dts is U-Boot specific.
- Drop sun7i-a20-olimex-som-evb-emmc.dts since no board
added for this.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki [Sat, 4 Aug 2018 19:10:09 +0000 (00:40 +0530)]
ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3
Update all A31/A31s devicetree dtsi and dtsi files from
Linux-v4.18-rc3 with below commit:
commit
b240b419db5d624ce7a5a397d6f62a1a686009ec
Merge:
9c2dd8405c0c 518d2f43c358
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Thu Apr 5 21:18:09 2018 -0700
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki [Sat, 4 Aug 2018 19:10:08 +0000 (00:40 +0530)]
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
Update all A10s/A13/gr8/r8devicetree dtsi and dtsi files from
Linux-v4.18-rc3 with below commit:
commit
190e3138f9577885691540dca59c2f07540bde04
Merge:
cafc87023b0d a7affb13b271
Author: Arnd Bergmann <arnd@arndb.de>
Date: Tue Mar 27 14:58:00 2018 +0200
Merge tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki [Sat, 4 Aug 2018 19:10:07 +0000 (00:40 +0530)]
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
Update all A10 devicetree dtsi and dtsi files from Linux-v4.18-rc3
with below commit:
commit
590b0c0cfc6162aeebbf43eaafb9753b56df1532
Author: Pascal Roeleven <dev@pascalroeleven.nl>
Date: Fri Apr 20 12:21:12 2018 +0200
ARM: dts: sun4i: Fix incorrect clocks for displays
Note: Update pinctrl-0 for sun4i-a10-inet-3f.dts, sun4i-a10-inet-3w.dts
like other dts file since there dts file are U-Boot specific.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Liviu Dudau [Mon, 17 Sep 2018 16:45:03 +0000 (17:45 +0100)]
include/video.h: Remove declaration of functions that don't exist.
video_init, video_putc and video_puts functions are not implemented
anywhere, remove their declaration from the header.
Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Sébastien Szymanski [Mon, 10 Sep 2018 07:58:58 +0000 (09:58 +0200)]
video: cfb_console: flush cache in display_rle8_bitmap
Otherwise BMP RLE8 images are not properly displayed.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Mario Six [Thu, 27 Sep 2018 07:19:34 +0000 (09:19 +0200)]
cmd: Add osd commands
Add command to query information from and write text to on-screen
display (OSD) devices.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
Mario Six [Thu, 27 Sep 2018 07:19:33 +0000 (09:19 +0200)]
test: list: Add tests for hexdump.c
Add tests for the hex2bin, bin2hex, and hex_to_bin functions, which were
recently added to U-Boot.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
Mario Six [Thu, 27 Sep 2018 07:19:32 +0000 (09:19 +0200)]
test: Add ut_asserteq_mem
Add a unit test assert-method, which compares two given memory areas for
byte-wise equality.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
Mario Six [Thu, 27 Sep 2018 07:19:31 +0000 (09:19 +0200)]
video_osd: Add osd sandbox driver and tests
Add sandbox driver and tests for the new OSD uclass.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
Mario Six [Thu, 27 Sep 2018 07:19:30 +0000 (09:19 +0200)]
video_osd: Add ihs_video_out driver
Add a driver for IHS OSDs on IHS FPGAs.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Mario Six [Thu, 27 Sep 2018 07:19:29 +0000 (09:19 +0200)]
drivers: Add OSD uclass
Some devices offer a text-based OSD (on-screen display) that can be
programmatically controlled (i.e. text displayed on).
Add a uclass to support such devices.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Heinrich Schuchardt [Wed, 19 Sep 2018 19:31:48 +0000 (21:31 +0200)]
dm: video: support more escape sequences
The EFI subsystems needs to know the size of the terminal. If the
environment variable
stdout = serial,vidconsole
this size cannot be read from the video console. So the EFI subsystem
sends escape sequences to read the size. With this patch we get support
for the following escape sequences:
ESC "7" Save cursor position
ESC "8" Restore cursor position
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Wed, 19 Sep 2018 18:18:38 +0000 (20:18 +0200)]
dm: video: adjust struct vidconsole_priv description
The third component of struct vidconsole_priv is ycur.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Heinrich Schuchardt [Wed, 19 Sep 2018 18:16:32 +0000 (20:16 +0200)]
MAINTAINERS: assign include/video*.h
The include/video*.h files are part of the drivers in drivers/video. So it
makes sense to assign them to the same maintainer.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Jagdish Gediya [Mon, 3 Sep 2018 16:05:12 +0000 (21:35 +0530)]
powerpc: dts: Enable device tree support for T2080QDS
Add device tree for T2080QDS board and enable CONFIG_OF_CONTROL
so that device tree can be compiled.
Update board README for device tree usage.
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
Jagdish Gediya [Mon, 3 Sep 2018 16:05:11 +0000 (21:35 +0530)]
powerpc: dts: Add u-boot.dtsi to use binman for MPC85xx boards
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
Jagdish Gediya [Mon, 3 Sep 2018 16:05:10 +0000 (21:35 +0530)]
powerpc: mpc85xx: Use binman to embed dtb inside U-Boot
Below is the sequence to embed dtb inside U-Boot,
1. Remove bootpg and resetvec section if needed
2. Append dtb
3. Append bootpg and resetvec section back if removed in step 1
Above procedure is required only when CONFIG_MPC85xx and
CONFIG_OF_SEPARATE are defined.
Add new config CONFIG_MPC85XX_HAVE_RESET_VECTOR to indicate that
image has resetvec section. Step 1 and step 3 described above are
required only if this config is y.
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
Jagdish Gediya [Mon, 3 Sep 2018 16:05:09 +0000 (21:35 +0530)]
powerpc: mpc85xx: Select BINMAN by default
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
Jagdish Gediya [Mon, 3 Sep 2018 16:05:08 +0000 (21:35 +0530)]
binman: Add support for PowerPC mpc85xx 'bootpg + resetvec' entry
This entry contains the PowerPC mpc85xx boot page and resetvec
sections.
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Jagdish Gediya [Mon, 3 Sep 2018 16:05:07 +0000 (21:35 +0530)]
binman: Add a new "skip-at-start" property in Section class
Currently binman calculates '_skip_at_start' based on 'end-at-4gb'
property and it is used for x86 images.
For PowerPC mpc85xx based CPU, CONFIG_SYS_TEXT_BASE is the entry
offset of the first entry. It can be 0xeff40000 or 0xfff40000 for
nor flash boot, 0x201000 for sd boot etc, so "_skip_at_start"
should be set to CONFIG_SYS_TEXT_BASE.
'end-at-4gb' property is not applicable where CONFIG_SYS_TEXT_BASE +
Image size != 4gb.
Add new property 'skip-at-start' in Section class so that
'_skip_at_start' can be calculated either based on 'end-at-4gb'
or based on "skip-at-start".
Add a test case to check that 'skip-at-start' and 'end-at-4gb'
property can't be used together.
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
Jagdish Gediya [Mon, 3 Sep 2018 16:05:06 +0000 (21:35 +0530)]
powerpc/dts: Makefile changes to clean and build dts
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
Jagdish Gediya [Mon, 3 Sep 2018 16:05:05 +0000 (21:35 +0530)]
powerpc/dts: Define '_end' symbol in mpc85xx U-Boot lds files
'board_fdt_blob_setup' function sets up fdt blob at '&_end' so
define '_end' symbol in mpc85xx lds files.
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Ran Wang [Wed, 26 Sep 2018 05:46:30 +0000 (13:46 +0800)]
armv7: ls102xa: Disable QE before enter deep sleep
Otherwise system will hang after executing wfi.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Ran Wang [Wed, 26 Sep 2018 05:46:29 +0000 (13:46 +0800)]
drivers: qe: Move CONFIG_U_QE to Kconfig
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
[York S: revised subject line and removed commit message]
Reviewed-by: York Sun <york.sun@nxp.com>
Zhao Qiang [Wed, 29 Aug 2018 03:46:34 +0000 (11:46 +0800)]
net: fman: Support both new and legacy FMan Compatibles
Recently the FMan Port and MAC compatibles were changed. This patch
aligns the FMan Port and MAC compatibles to the new FMan device tree
binding document. The FMan device tree binding document can be found
in the Linux kernel version 3.18.0, commit
297d35fd2a7d3fbd4e5c0f0c1c18213117ba11ba
./Documentation/devicetree/bindings/powerpc/fsl/fman.txt
This patch doesn't affect legacy compatibles support.
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
[York S: reformatted commit message]
Reviewed-by: York Sun <york.sun@nxp.com>
Priyanka Jain [Tue, 18 Sep 2018 05:27:27 +0000 (10:57 +0530)]
ls2080ardb: remove dhcp function from env as boot source
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Pramod Kumar [Fri, 14 Sep 2018 11:24:33 +0000 (16:54 +0530)]
ls1088a: remove dhcp function from u-boot env as boot source
Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Pramod Kumar [Wed, 12 Sep 2018 08:46:49 +0000 (14:16 +0530)]
ls1012a: remove debug info from u-boot log
Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Laurentiu Tudor [Mon, 27 Aug 2018 14:34:00 +0000 (17:34 +0300)]
armv8: ls1043a: enable icid setup for qman portals
Enable support for ICID setup of qman portals and the required device
tree fixups.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Laurentiu Tudor [Mon, 27 Aug 2018 14:33:59 +0000 (17:33 +0300)]
armv8: ls1043a: add icid setup support
Reuse the existing ICID setup code done for LS1046A smmu enablement
and add the equivalent setup for LS1043A chips.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Laurentiu Tudor [Mon, 27 Aug 2018 14:33:58 +0000 (17:33 +0300)]
armv8: ls1043a: advertise QMan v3 in configuration
The QMan IP block in this SoC is version 3.2 so advertise
this in the SoC configuration header.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Laurentiu Tudor [Mon, 27 Aug 2018 14:33:57 +0000 (17:33 +0300)]
armv8: fsl-layerscape: add missing qe base address define
Add define for QUICC Engine register block base address.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
[York S: revised commit message]
Reviewed-by: York Sun <york.sun@nxp.com>
Prabhakar Kushwaha [Mon, 27 Aug 2018 07:28:52 +0000 (12:58 +0530)]
driver: net: fsl-mc: Memset MC reserve ram memory before usage
Memory reserved for Management Complex needs to be cleaned before any
usage.
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
[York S: revised commit message]
Reviewed-by: York Sun <york.sun@nxp.com>
Nipun Gupta [Mon, 20 Aug 2018 10:31:14 +0000 (16:01 +0530)]
u-boot: fixup the iommu-map property of fsl-mc node
The iommu-map property in the fsl-mc node is updated by
valid stream-ids by u-boot. This patch is to fixup this
property for LS208x and LS1088.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Pramod Kumar [Tue, 14 Aug 2018 04:19:55 +0000 (09:49 +0530)]
ls1012afrwy: Add ls1012afrwy revC board support.
LS1012AFRWY supports three board revisions.
Revision A and B board are collectively identified as revA/B,
Revision C board is identifies as revC.
Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
[York S: revised commit message]
Reviewed-by: York Sun <york.sun@nxp.com>
Peng Ma [Wed, 1 Aug 2018 06:15:43 +0000 (14:15 +0800)]
scsi: ceva: add ls1021a soc support.
Add ahci compatible support for ls1021a soc.
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Peng Ma [Wed, 1 Aug 2018 06:15:42 +0000 (14:15 +0800)]
arm: ls1021atwr: enable DM support for sata
Enable related configs to support sata DM feature.
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Peng Ma [Wed, 1 Aug 2018 06:15:41 +0000 (14:15 +0800)]
armv7: dts: fsl-ls1021a: add sata node support enable sata for ls1021a-qds and ls1021a-twr
Add sata node to support this feature.
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Peng Ma [Wed, 1 Aug 2018 06:15:40 +0000 (14:15 +0800)]
armv7: fsl: remove sata support
Remove the old implementation in order to enable DM for sata
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
projects / platform / kernel / u-boot.git / log