zhilei.wu [Fri, 13 Jul 2018 05:33:15 +0000 (13:33 +0800)]
osd: debug for osd suspend fail issue
PD#164508: osd: debug for osd suspend fail issue
Change-Id: Ibd7930c64d102bbe53e1775fa4f52aab0c67d078
Signed-off-by: zhilei.wu <zhilei.wu@amlogic.com>
Yingyuan Zhu [Thu, 28 Jun 2018 07:54:02 +0000 (15:54 +0800)]
keypad: gpio key drive optimization
PD#169209: keypad: gpio key drive optimization
1.replace the old interface gpio_ with gpiod_.
2.add irq detection mode,can be configured as
interrupt mode or polling mode through DTS.
3.add keys to eliminate jitter.
4.remove useless code.
Change-Id: I81ef3cd0061e36faa10f58932588ff5031208b25
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
Hong Guo [Tue, 31 Jul 2018 06:45:00 +0000 (14:45 +0800)]
CPUFREQ: modify cpufreq driver.
PD#170037: modify cpufreq driver.
Change-Id: Ic07e887dda26447653c407d06b009755aacc0d41
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Jianxin Qin [Wed, 25 Jul 2018 05:43:26 +0000 (13:43 +0800)]
usb: dwc2: modify SOF interrupt
PD#170407: usb: dwc2: modify SOF interrupt
SOF interrupt leads to the system overloading, so we reduce the
workload in the SOF interrupt handler.
Change-Id: I6bf11e672e0f024ac4b2da1ba47effe1da1ab476
Signed-off-by: Jianxin Qin <jianxin.qin@amlogic.com>
Ao Xu [Wed, 1 Aug 2018 08:48:16 +0000 (16:48 +0800)]
board: solve 32bit printk type error
PD#169652: board: solve 32bit printk type error
for some data type, printk should follow below rule:
size_t: %zu or %zx
phys_addr_t: %pa
Change-Id: I456bd2f010080e6365b521a787367cc51bb4e9f4
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
Xingyu Chen [Mon, 30 Jul 2018 07:29:03 +0000 (15:29 +0800)]
input: avin_detect: add avin detect driver
PD#170716: input: avin_detect: add avin detect driver
porting from the Linux-3.14
Change-Id: Id0566a62be7d587ca6368b3d29f3887bab1f6d87
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
nengwen.chen [Mon, 30 Jul 2018 08:35:18 +0000 (16:35 +0800)]
atv_demod: modify afc to prevent demod error locking [1/1]
PD#169984: modify afc to prevent demod error locking
Change-Id: I02d184309fdeb5696da6158e0f29311cdc7675a5
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
yicheng shen [Mon, 30 Jul 2018 05:50:20 +0000 (13:50 +0800)]
hdmirx: keep bandgap enabled to fix bibi sound issue
PD#170722: hdmirx: keep bandgap enabled to fix bibi sound issue
Change-Id: I55e6cb9084ea93f5bf4accf1cffc04d873cb7c0e
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Evoke Zhang [Fri, 15 Jun 2018 09:23:24 +0000 (17:23 +0800)]
backlight: optimize pwm level step calculation
PD#168569: backlight: optimize pwm level step calculation
Change-Id: I570c12cc44af399a861ca54ad98180314924c180
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Shuide Chen [Thu, 21 Jun 2018 01:56:02 +0000 (09:56 +0800)]
power: battery add dummy battery driver [1/1]
PD#169027: add dummy battery and charger for CTS/VTS
some CTS and VTS testcases use the battery information, here
implement a dummy battery for it.
for P, it requires a dummy charger to set the online property to 1.
Change-Id: I7cf516f7050b3930cfdd933dc65b811289f89c4f
Signed-off-by: Shuide Chen <shuide.chen@amlogic.com>
Shuide Chen [Tue, 31 Jul 2018 00:19:07 +0000 (08:19 +0800)]
dts: bingup for u212 [2/3]
PD#170940: dts for u212, change codec cma to 196M
add dts for u212
Change-Id: I9d3f20d9c8e3a8a60a67d28d85bdfdfa7d4932b7
Signed-off-by: Shuide Chen <shuide.chen@amlogic.com>
Yong Qin [Tue, 24 Jul 2018 05:55:25 +0000 (13:55 +0800)]
cec: add debug cmd interface
PD#170470: cec: add debug cmd interface
1.enable cec error_initator interrupt
2.add debug cmd interfacec
1)dump info
2)register read write
3)bypass hal cmd
3.boot reson ioctrl add mutex unlock
Change-Id: I340e4d363a46890001ff0494744cd9ec2fb28ea3
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Dezhi Kong [Tue, 31 Jul 2018 08:45:46 +0000 (16:45 +0800)]
di: fix pre mif reset issue for g12a
PD#169426: di: fix pre mif reset issue for g12a
Change-Id: I851ef6ff9a1ac844afd32bc40e73c4a189a47b6f
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
Nian Jing [Mon, 30 Jul 2018 13:08:30 +0000 (21:08 +0800)]
tvafe: fix avin unstable issue
PD#170316: fix avin unstable issue
Change-Id: Id229eff1e996399251cf2d3c93c3d4b2561f8451
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
jiamin ma [Tue, 31 Jul 2018 10:11:54 +0000 (18:11 +0800)]
unifykey: switch init order of unifykey and securitykey
PD#170850: unifykey: wrong unifykey driver init status
The linux driver init order depends on init func level and
position in Makefile. Securitykey and unifykey are both
necessary for unifykey driver to work normal. Currently
securitykey is always initialized before unifykey, and the
unifykey init status checking API only checkes whether the
probe process of unifykey is done.So there is a chance when
LCD driver get unifykey probing process done status, while
securitykey is still under probing, which means unifykey
still cannot work normal
We should switch the init order of these two module to
solve this issue
Change-Id: I8c4471d3689cff4356645fdc45df735be625baa2
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>
Huan Biao [Mon, 30 Jul 2018 05:58:04 +0000 (13:58 +0800)]
thermal: fix big core smp fail to cooldev crash
PD#170391:thermal: fix big core smp fail to cooldev crash
big core smp fail, cooldev driver cannot get
cpu2 cpufreq policy, driver init fail, gpu cooldev
data not init, mail ko init fail crash.
Change-Id: I705240b060d80f7afe97fe4dcb20bb2beebc2e13
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
Zongdong Jiao [Mon, 30 Jul 2018 06:58:50 +0000 (02:58 -0400)]
hdmitx: forward partial EDID data to upstream [2/2]
PD#170713: hdmitx: forward partial EDID data to upstream
TXLX have both HDMITX and HDMIRX. We need forward nessary downstream
information to upstream.
Change-Id: Ie129415b49ceeba2f326d1e500323d39c3a8ba12
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Hanjie Lin [Thu, 19 Jul 2018 09:20:59 +0000 (17:20 +0800)]
defconfig: disable ext2 support
PD#167122: defconfig: ext2 cause ltp test fail
now amlogic ext2 has disabled xattr feature
it cause ltp test fail
so disable ext2
Change-Id: I26876366bf4efecf2a3002ba36751bec31286ea9
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Shunzhou Jiang [Wed, 25 Jul 2018 08:42:42 +0000 (16:42 +0800)]
clk: clock: Fix PCIE100M clock output some corner chip swing small issue
PD#170610: clock: Fix PCIE100M clock output
Change-Id: I8ada918f6910b537374115260ebaea7a4489e9d6
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
hongmin hua [Mon, 30 Jul 2018 08:55:04 +0000 (16:55 +0800)]
cec: g12b: modify the reg definition
PD#170760: cec: g12b: modify the reg definition
Change-Id: I01cdbb5584c5af3b23b8a1bd18c00bfadf5c8aa2
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
Evoke Zhang [Tue, 24 Jul 2018 03:17:55 +0000 (11:17 +0800)]
backlight: ldim: add custome bl region num support for iw7027
PD#170488: ldim: add custome bl region num support for iw7027
Change-Id: If57cc7dd77f6143ce6c904716750c3edbfcbd546
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
nengwen.chen [Thu, 26 Jul 2018 08:10:38 +0000 (16:10 +0800)]
atv_demod: improve the nicam and a2 [1/6]
PD#169518: improve the nicam and a2
Change-Id: I91b48aea877ada0b733f4fe735fb8a2ab0f53163
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
yicheng shen [Mon, 23 Jul 2018 11:05:22 +0000 (19:05 +0800)]
hdmirx: mute audio when unsupport format received
PD#170497: hdmirx: mute audio when unsupport format received
Change-Id: Id849c725b88d1d80328f3ef6b76ba09248d5b9b8
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
hongmin hua [Wed, 11 Jul 2018 02:42:14 +0000 (10:42 +0800)]
hdmirx: edid mix add hdr block
PD#169888: hdmirx: edid mix add hdr block
Change-Id: I0a280abbd37295abc8ba8dc61ee91ee888b6e2e5
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
Zongdong Jiao [Tue, 3 Jul 2018 06:09:10 +0000 (14:09 +0800)]
hdmitx: forward hdr block data to rprx [1/1]
PD#168875: hdmitx: forward hdr block data to rprx
Under repeater mode, need forward hdr block data to rprx.
Change-Id: Ib57dc4071f621e620a88cdf24340194cca1f8b24
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Xing Wang [Thu, 26 Jul 2018 07:51:37 +0000 (15:51 +0800)]
arm64: dts: txl: audio: re-map spk and dac mask
PD#170319: arm64: dts: txl: audio: re-map spk and dac mask
Change-Id: I47da64823dfa90460abf2327cd2e628320ef8ab1
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
nengwen.chen [Tue, 24 Jul 2018 13:02:12 +0000 (21:02 +0800)]
atv_demod: modify tuner config in dts [1/3]
PD#170567: modify tuner config in dts
Change-Id: Ibd14a6d334f097b1df243bfdfb9e22cad5b80e93
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Evoke Zhang [Wed, 18 Jul 2018 11:58:35 +0000 (19:58 +0800)]
lcd: mute: wait vsync for display shadow [2/2]
PD#170101: lcd: mute: wait vsync for display shadow
Change-Id: If17838c40d46fd6f4b943d313456738fec50185a
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Evoke Zhang [Mon, 23 Jul 2018 09:59:55 +0000 (17:59 +0800)]
lcd: lcd_extern: increase init_on table size support to 3000 [2/2]
PD#170356: lcd_extern: increase init_on table size support to 3000
Change-Id: Ic37f918553436fe40c0afc5b307c54d9b07febba
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Lei Qian [Thu, 26 Jul 2018 03:41:15 +0000 (11:41 +0800)]
dts:txl:optimize ion memory usage [2/2]
PD#170336:dts:txl: optimize ion memory usage
Change-Id: I8eb3cbf60ceeba959dbb74b51912947c9880ceb4
Signed-off-by: Lei Qian <lei.qian@amlogic.com>
Nan Li [Tue, 24 Jul 2018 05:30:13 +0000 (13:30 +0800)]
emmc: g12a: optimize sd_uart for revA.
PD#170542: optimize sd_uart dts /sd1 for g12a revA.
Change-Id: I35bbb52790a1a11cc1d95d02c6cda717f43c9f75
Signed-off-by: Nan Li <nan.li@amlogic.com>
Xing Wang [Fri, 20 Jul 2018 02:37:50 +0000 (10:37 +0800)]
audio: auge: fix S/PDIF reset
PD#170264: audio: auge: fix S/PDIF reset
Change-Id: I515319feb04b6c97850d218a5786990980054c51
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
nengwen.chen [Tue, 24 Jul 2018 06:20:03 +0000 (14:20 +0800)]
demod: prevent the agc pin conflict when used in atv or dtv demod [1/3]
PD#170409: prevent the agc pin conflict when used in atv or dtv demod
Change-Id: I78359502a97d79a703e990669bd1acddae6679ce
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
rongrong zhou [Fri, 20 Jul 2018 06:11:16 +0000 (14:11 +0800)]
media: ptsserv: set pts_us64 in pts_lookup_offset
PD#170127: media: ptsserv: set pts_us64 in pts_lookup_offset
Setiting pts_us64 prevents the decoder from using uninitialized values,
Sometimes the function return pts valid only if pts is set.
Change-Id: If4b0a329bbc013902fd2045207420f0f85bfff4e
Signed-off-by: rongrong zhou <rongrong.zhou@amlogic.com>
hongmin hua [Mon, 16 Jul 2018 06:15:50 +0000 (14:15 +0800)]
cec: modify the line check for g12a
PD#168682: cec: modify the line check for g12a
Change-Id: Id7f318caae3230df9bd6689f566524e05fd512bd
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
Yixun Lan [Fri, 13 Jul 2018 08:20:13 +0000 (16:20 +0800)]
net: xfrm: enable compat xfrm syscall
PD#170491: net: xfrm: enable compat xfrm syscall
When using 32bit user space and 64bit kernel in ARM64 platform,
we do not need to disable compat syscall, since there is struct size
difference between user space and kernel space.
This will fix error in xfrm test cases of VtsKernelNetTest.
Change-Id: Ifd6c1f5e678138286678d5c119c0efa42d5b3a59
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
can.cao [Tue, 17 Jul 2018 07:48:12 +0000 (15:48 +0800)]
dts: Add low memory config for u200 [1/2]
PD#170190: Add new dts file for u200
Change-Id: Ia5332c20906666fa7828d671f16f872e05954cac
Signed-off-by: can.cao <can.cao@amlogic.com>
Yong Qin [Mon, 23 Jul 2018 07:42:31 +0000 (15:42 +0800)]
cec: add cec support for txl p346 p341
PD#170469: cec: add cec support for txl p346 p341
1.support p346
2.support p341
Change-Id: I4b680d407ce0c79eb952a3b74c2cf06df15d32ae
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Jiyu Yang [Tue, 19 Jun 2018 08:37:34 +0000 (16:37 +0800)]
dts: gpu: g12b: enable ACE-lite
PD#168676: dts: gpu: g12b: enable ACE-lite
Change-Id: I19eaa04dd0ce35499b162fb1caafa7fa8a438404
Signed-off-by: Jiyu Yang <Jiyu.Yang@amlogic.com>
jiaming.huang [Sat, 21 Jul 2018 12:20:24 +0000 (20:20 +0800)]
arm64: dts: txl: add 4g emmc support
PD#170439: arm64: dts: txl: add 4g emmc support
arm64: dts: txl: add 4g emmc config for txl board
Change-Id: I452efa07da038d8d8316c8afadf121522122afeb
Signed-off-by: jiaming.huang <jiaming.huang@amlogic.com>
Ting Li [Fri, 20 Jul 2018 03:15:45 +0000 (11:15 +0800)]
RTC: enable rtc dev for systemclock save[1/1]
PD#170346: RTC: enable rtc dev for systemclock save[1/1]
enable rtc dev for systemclock save
Change-Id: I1a055b0c2448160fa1554ac3b82da0760b26a4fd
Signed-off-by: Li Ting <ting.li@amlogic.com>
rongrong zhou [Fri, 20 Jul 2018 09:24:20 +0000 (17:24 +0800)]
codec_mm: set enable_slot_from_sys to try one page
PD#170091: codec_mm: set enable_slot_from_sys to try one page
set enable_slot_from_sys to try one page
Change-Id: I53a50b666e7986abe1627a70b5112c234a6ce1ec
Signed-off-by: rongrong zhou <rongrong.zhou@amlogic.com>
Sunny Luo [Mon, 23 Jul 2018 08:12:22 +0000 (16:12 +0800)]
dts: spicc: change txl dts to use upstream driver
PD#164751: dts: spicc: change txl dts to use upstream driver
Change-Id: Ibf51059122d31316bb644d6431466e36afe44cb6
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
wenfeng.guo [Fri, 20 Jul 2018 10:52:00 +0000 (18:52 +0800)]
di: add more debug info into dumpstate_board
PD#170100: di: add more debug info into dumpstate_board
1. add new debugfs:
cat /sys/kernel/debug/di/state
cat /sys/kernel/debug/vdin0/state
2. Retain the original usage
echo state > /sys/class/vdin/vdin0/attr;
echo state > /sys/class/deinterlace/di0/debug;
Change-Id: I98054baa260ae5e9bf945d23b5becd2064c81a69
Signed-off-by: wenfeng.guo <wenfeng.guo@amlogic.com>
Long Yu [Tue, 26 Jun 2018 11:19:54 +0000 (19:19 +0800)]
emmc: Modify txlx latest data for data6
PD#169386: emmc: modify txlx latest data for data6
Change-Id: I5bbfa5fa7fa7641a3a532ef74f5e5450b518135c
Signed-off-by: Long Yu <long.yu@amlogic.com>
Renjun Xu [Tue, 12 Jun 2018 08:34:14 +0000 (16:34 +0800)]
audio: support the number of datain+loopback beyond 8 channel feature
PD#168268: add support datain+loopback beyond 8 channel feature
You need add datain_datalb_total = <10>; at the end
of aml_loopback node on dts or amixer command to enable.
e.g. pdm 8ch + loopback 2ch case
pdm 8ch + loopback 8ch case
pdm 6ch + loopback 4ch case
if total number of channel beyond 8 , must utilize 16ch to capture.
so that we change relevant parameter like this:
if (lb_cfg->datain_datalb_total > 8) {
lb_cfg->datain_chnum = 8;
lb_cfg->datain_chmask = 0xff;
lb_cfg->datalb_chnum = 8;
lb_cfg->datalb_chmask = 0xff;
lb_cfg->datalb_chswap = 0x76543210;
}
capture command:
arecord -Dhw:0,3 -c 16 -r 48000 -f S32_LE /test.wav
You can use asound.conf to choose your channel.
Change-Id: I0a59c4c12da603efd8709bf36d6dac640fdf788a
Signed-off-by: Renjun Xu <renjun.xu@amlogic.com>
xuhua zhang [Thu, 19 Jul 2018 08:15:52 +0000 (16:15 +0800)]
vdin: g12a/g12b: fix screencap error from ENCL
PD#170320: vdin: g12a/g12b: fix screencap error from ENCL
Change-Id: I16bd33f31d126b714aa15e09bd782525b25da54b
Signed-off-by: xuhua zhang <xuhua.zhang@amlogic.com>
Jianxiong Pan [Thu, 5 Jul 2018 09:17:02 +0000 (17:17 +0800)]
defect: fix code defects in public parts
PD#166793: code defects in public parts
crypto: exclude the of_match_device function return value is NULL
ddr_tool: solve problems of bad_shift and use_after_free
debug: prevent the number of cpus from exceeding the total
efuse: solve the problem of buffer_size_warning
memory_ext: solve the problems of divide_by_zero and overrun
unifykey: solve the problem of buffer_size_warning,and add a variable
for useless_call
wifi: exclude the of_match_node function return value is NULL,and avoid
the problem of string_overflow
Change-Id: I099ce7c60ddd0266d067215108f0e2baeb31c234
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Dezhi Kong [Tue, 3 Jul 2018 07:57:01 +0000 (15:57 +0800)]
vlock: add dynamic switch from pll to enc mdoe
PD#169634: vlock: add dynamic switch from pll to enc mode
1.seperate vlock process from amvecm_on_vs,
avoid the influence of repeate call.
2.add dynamic switch from pll to enc mode,
pll adj firstly,then switch to enc mode do fine tuning.
3.seperate vlock reg init from amcm interface,
avoid the influence of rdma mode.
4.decrease enc line adjust limit.
5.add enc adjust range check.
Change-Id: I6352b45e9ec8869be43660c03352d1a406ca8a0a
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
nengwen.chen [Wed, 18 Jul 2018 03:23:51 +0000 (11:23 +0800)]
atv_demod: improve atv demod timer handler [1/1]
PD#169330: improve atv demod timer handler
1.Add work queue to do the time consuming operations.
2.Optimize code.
3.V2.02
Change-Id: I809179ab84fc236cc4dba234e21448d6528f9c5e
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Yong Qin [Tue, 17 Jul 2018 10:00:34 +0000 (18:00 +0800)]
cec: add otp in str mode
PD#170099: cec: add otp in str mode
1.add otp function in str mode
Change-Id: I49cee530f63246bc080ec4a6eb9538a0bb6c6bae
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
xuhua zhang [Wed, 18 Jul 2018 09:37:39 +0000 (17:37 +0800)]
arm64: dts: vdin: use discontinus way to alloc cma
PD#170275: arm64: dts: vdin: use discontinus way to alloc cma
Change-Id: I9a0ed8e612a98f5558f90df2b91b3384e954b9e4
Signed-off-by: xuhua zhang <xuhua.zhang@amlogic.com>
Gongwei [Thu, 19 Jul 2018 11:07:58 +0000 (19:07 +0800)]
dts: g12b: add efusekey support [1/1]
PD#169961: dts: g12b: add efusekey support
Change-Id: Ideed83ddc3ad59370165079e2c8e236510507573
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
shihong.zheng [Thu, 19 Jul 2018 02:31:05 +0000 (10:31 +0800)]
dts: audio: g12b audio config spdif_a;
PD#169619: dts: g12b audiobus tdmb samesource_sel config to 3.
Change-Id: I853d60297fa3b24989c160ec95c68e4ccd76623b
Signed-off-by: shihong.zheng <shihong.zheng@amlogic.com>
Qianggui Song [Wed, 4 Jul 2018 05:42:37 +0000 (13:42 +0800)]
touchscreen: optimize module init flow
PD#169285: touchscreen: optimize module init flow
1.Initializing/Uninitializing resource in probe/remove function is more
appropriate in this case.
2.Use module_i2c_driver to replace module_init/exit to make code more
compact.
verify on a311d_w400
Change-Id: If02f12a6c290a6346d439785060e60a6cd815c12
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
nengwen.chen [Wed, 18 Jul 2018 11:30:41 +0000 (19:30 +0800)]
arm64: dts: txlx: modify the txlx adaptation to txl bringup
PD#168480: arm64: dts: txlx: modify the txlx adaptation to txl bringup
Change-Id: I85190803871ea9982a0ec41d87680c975c84d171
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Xing Wang [Thu, 24 May 2018 15:30:01 +0000 (23:30 +0800)]
audio: auge: fix hdmi pop noise when bootup
PD#165171: audio: auge: fix hdmi pop noise when bootup
Change-Id: Ic8186b230c5c27966467e35d23b8c041309e6922
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Bo Yang [Tue, 17 Jul 2018 12:19:51 +0000 (20:19 +0800)]
arm64: dts: txl: initial add dt files for txl boards
PD#168480: arm64: dts: txl: initial add dt files for txl boards
Change-Id: Ie72d114ee83d97a71e485afea465d3db0f102347
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
Xing Wang [Thu, 12 Jul 2018 14:17:24 +0000 (22:17 +0800)]
audio: meson: sdd sound card support for txl
PD#168480: audio: meson: add sound card support for txl
Change-Id: I89117e1cfee2bc99289b00f8ead4acb2f1b13a98
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
libo [Mon, 16 Jul 2018 08:12:47 +0000 (16:12 +0800)]
wifi: meson: fix kernel panic when dts not config wifi pwms
PD#168480: wifi: fix kernel panic when dts not config wifi pwms
Change-Id: I8907ec9f131034fbbe113e74ff3a760b6b8169e1
Signed-off-by: libo <bo.li@amlogic.com>
Jihong Sui [Tue, 17 Jul 2018 12:30:02 +0000 (20:30 +0800)]
dtv_demod: txl: add dtv demod support for txl
PD#168480 :dtv_demod: txl: add dtv demod support for txl
Change-Id: Ib2503aa5f626a5fff115104d0b246cc080fb1123
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
nengwen.chen [Tue, 17 Jul 2018 09:50:52 +0000 (17:50 +0800)]
atv_demod: txl: add atv demod support for txl
PD#168480: atv_demod: txl: add atv demod support for txl
Change-Id: I793946253ec9860473bdd57cf979168d9903f5df
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Jihong Sui [Mon, 2 Jul 2018 05:02:58 +0000 (13:02 +0800)]
deinterlace: txl: add di support for txl
PD#168480: deinterlace: txl: add di support for txl
Change-Id: I09e6982258291fd36a9b551bc4a6f24d68107cd2
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Jian Hu [Mon, 2 Jul 2018 09:52:37 +0000 (17:52 +0800)]
reboot: meson: standardize the compatible property
PD#168480: reboot: meson: standardize the compatible property
Use 'amlogic,reboot' instead of 'aml,reboot'.
'aml,reboot' will be removed later.
Change-Id: I7d16795c98aa293fe204121ccd7da41c7d078f77
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
Nian Jing [Wed, 27 Jun 2018 08:18:02 +0000 (16:18 +0800)]
tvafe: meson: add support for txl
PD#168480:tvafe: meson: add support for txl
Add atv/avin function for txl.
Change-Id: I1e9727b2578a19a31436ae5cbe924b4311deae9d
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Bo Yang [Thu, 28 Jun 2018 06:39:55 +0000 (14:39 +0800)]
watchdog: meson: add watchdog support for txl
PD#168480: add watchdog support for txl
Change-Id: I53ac23d1fedec155871ecec3229dedeb13ca7076
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
jiamin ma [Thu, 28 Jun 2018 05:50:51 +0000 (13:50 +0800)]
unifykey: txl: add unifykey support for txl
PD#168480: unifykey: txl: add unifykey for txl
Change-Id: If9d36e91f8fef0694bacc69e746163e2e96befc6
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>
hongmin hua [Tue, 26 Jun 2018 12:40:42 +0000 (20:40 +0800)]
cec: txl: add cec support for txl
PD#168480: cec: txl: add cec support for txl
Change-Id: I76c4c241aa882f9a454fed8813fd0d733995bf5d
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
Evoke Zhang [Tue, 26 Jun 2018 05:56:12 +0000 (13:56 +0800)]
lcd: meson: add support for txl
PD#168480: lcd: meson: add support for txl
Change-Id: I8bf458282886f162e4777def4a74f661a0f9f4c0
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Xingyu Chen [Mon, 18 Jun 2018 08:33:34 +0000 (16:33 +0800)]
iio: adc: meson: add sar adc support for txl
PD#168480: iio: adc: meson: add sar adc support for txl
Change-Id: I9febffdb4fef582f5a91138491ae87d11ca240ee
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
Hang Cheng [Tue, 26 Jun 2018 07:03:55 +0000 (15:03 +0800)]
hdmirx: txl: add support for txl
PD#168480: hdmirx: txl: add support for txl
Change-Id: Ia1216721f2732052c5c3a5384a3dc01ffacb9392
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
Xingyu Chen [Tue, 26 Jun 2018 07:13:33 +0000 (15:13 +0800)]
iomap: txl: add iomap support for txl
PD#168480: iomap: txl: add iomap support for txl
Change-Id: Icbd5a8811950cd806cf2b6a4b08dca37402e52e7
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
Evoke Zhang [Mon, 25 Jun 2018 10:52:45 +0000 (18:52 +0800)]
vpu: txl: add vpu support for txl
PD#168480: vpu: txl: add vpu support for txl
Change-Id: I7562e0831e1f77c65c169c7292ee2a6d2bfc4472
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
bichao.zheng [Sat, 23 Jun 2018 08:41:49 +0000 (16:41 +0800)]
pwm: meson: add support for txl
PD#168480: pwm: meson: add support for txl
1、 add support for txl
2、 fix txl、txlx clock mux selection error issue
Change-Id: Iff7eeb16086604030414d4e350fd533a3d2328b1
Signed-off-by: bichao.zheng <bichao.zheng@amlogic.com>
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
Xingyu Chen [Mon, 18 Jun 2018 06:45:20 +0000 (14:45 +0800)]
irqchip: meson: add gpio IRQ support for txl
PD#168480: irqchip: meson: add gpio IRQ support for txl
Change-Id: I03b32a3ffe4a7e9b63631ac5e593bcbf346b8765
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
Jian Hu [Mon, 18 Jun 2018 03:42:16 +0000 (11:42 +0800)]
i2c: meson: add support for txl
PD#168480: i2c: meson: add support for txl
Change-Id: I0c4fe9d2e6caec0cfa812af28476774db69a4e89
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
Xingyu Chen [Sat, 16 Jun 2018 12:14:16 +0000 (20:14 +0800)]
pinctrl: txl: add pinctrl & gpio support for txl
PD#168480: pinctrl: txl: add pinctrl & gpio support for txl
Change-Id: I2496cdebfc283e90825f5dd7d20b0e16f57158d2
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
Jian Hu [Thu, 14 Jun 2018 09:44:24 +0000 (17:44 +0800)]
clk: txl: initial add clock driver
PD#168480: clk: txl: initial add clock driver
remove CLK_SET_RATE_PARENT flag for spicc.
If add CLK_SET_RATE_PARENT, it will change clk81 rate when set
spicc clock rate.
Change-Id: I80fec2c6d10611994ff40b06307e39b51ddb5a1a
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
Ao Xu [Tue, 3 Jul 2018 11:29:16 +0000 (19:29 +0800)]
block: loop: enable loop partiton scanning
PD#168231: block: loop: enable loop partiton scanning
If max_part is given, partition scanning is globally
enabled for loop devices.
Change-Id: I7a8ca59eff85cf9ee97264c3d8ae8dceb198cf32
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
nengwen.chen [Thu, 12 Jul 2018 08:00:37 +0000 (16:00 +0800)]
atv_demod: fix nicam. [1/1]
PD#169523: fix nicam.
Change-Id: Ied4b6867b7993164cd156f120099767b12ab131a
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Yi Zeng [Fri, 13 Jul 2018 07:33:31 +0000 (15:33 +0800)]
mtd: add new ATO slc nand support
PD#170048: mtd: add new ATO slc nand support
add a ATO slc nand: AFND2G08U3A
Change-Id: I0263682231008c862c9f3f77d02ef7512de3a46f
Signed-off-by: Yi Zeng <yi.zeng@amlogic.com>
Nian Jing [Wed, 11 Jul 2018 08:34:59 +0000 (16:34 +0800)]
tvafe: fix wss issues
PD#169836: fix wss issues
wss detect slowly
aspect ratio unstable when set off on machine
aspect ratio 4:3 different with screen mode 4:3
Change-Id: I66d0aa393808513975885b86ee18e4c62bf10c88
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
wenfeng.guo [Tue, 26 Jun 2018 07:10:22 +0000 (15:10 +0800)]
di: fix coverity error
PD#169049: di: fix coverity error
Change-Id: I267ae15a1a72ad4255a182f4e7617ac641774c49
Signed-off-by: wenfeng.guo <wenfeng.guo@amlogic.com>
jiamin ma [Wed, 11 Jul 2018 08:17:25 +0000 (16:17 +0800)]
dts: enable ramoops for all boards
PD#169897: dts: add ramoops node
Change-Id: I1e4bce21a5740d3cc73ffefe803cded4b8a7e24c
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>
Shuai Li [Mon, 16 Jul 2018 07:08:42 +0000 (15:08 +0800)]
audio: fix I2S noise at start-up
PD#168452: audio: fix I2S noise at start-up
Change-Id: I0c255509419773f57c09fcd814e72db2e5ad7beb
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Yong Qin [Wed, 11 Jul 2018 08:44:27 +0000 (16:44 +0800)]
cec: disable cec module clear logic addr
PD#169892: cec: disable cec module clear logic addr
1.for replace "keep reset" when cec disable
Change-Id: I2af29cd4d89ffd13bf35a41fd41d2eb0dbf68e55
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
libo [Fri, 13 Jul 2018 02:20:59 +0000 (10:20 +0800)]
wifi: softirq: reduce ksoftirqd scheduled rate to improve TCP throughtput
PD#162113: improve ap62x8 rx tput
The reason why wifi TCP rx throughtput lower than kernel3.14 are as flollows:
On K3.14, RX has more time to work in ISR, but on K4.9, RX has more time to
work in kernel ksoftirqd thread, however, ksoftirqd has a very low priority.
On K4.9, a commit from upstream caused this difference, then revert it.
Revert "softirq: Let ksoftirqd do its job"
This reverts commit
4cd13c21b207e80ddb1144c576500098f2d5f882.
Change-Id: I094232dad5dfddbcd94c35ec42a5e3302ed52459
Signed-off-by: libo <bo.li@amlogic.com>
pengcheng chen [Mon, 16 Jul 2018 08:32:15 +0000 (16:32 +0800)]
osd: meson-axg: fix uboot logo flicker issue
PD#170129: osd: meson-axg: fix uboot logo flicker issue
Change-Id: I1604d716b1cb0bcf3804b0c7c89df38276c0cc2f
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Evoke Zhang [Mon, 16 Jul 2018 07:00:04 +0000 (15:00 +0800)]
lcd: fix driver version null pointer mistake
PD#170130: lcd: fix driver version null pointer mistake
Change-Id: Ic3589a8261f57c3eb7a231b5fb778f2421601abe
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Zhi Zhou [Fri, 22 Jun 2018 04:43:20 +0000 (12:43 +0800)]
codec_mm: config: fixed config error crash bug.
PD#166937:
not return errors when not find config.
will crashed on:
[ 9.478046@0] task:
ffffffc05aea8d80 task.stack:
ffffffc05a498000
[ 9.484090@0] PC is at configs_config2str+0x2c/0x240
[ 9.489001@0] LR is at configs_get_node_path_str+0x78/0xd4
[ 9.494433@0] pc : [<
ffffff800982f8cc>] lr : [<
ffffff80098311c8>]
pstate:
20000145
[ 9.501935@0] sp :
ffffffc05a49baf0
[ 9.505386@0] x29:
ffffffc05a49baf0 x28:
ffffffc05a498000
Change-Id: Ia5985d3e5aa7aefecb6867e3d2ab29efc7592b9b
Signed-off-by: Zhi Zhou <zhi.zhou@amlogic.com>
Bencheng Jing [Thu, 5 Jul 2018 13:25:37 +0000 (21:25 +0800)]
amvecm: hdr: optimaze set_hdr_matrix
PD#169610: amvecm: hdr: optimaze set_hdr_matrix
Change-Id: Ie3e79433234a76d20ec431814fe27a94b55924bb
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Sunny Luo [Thu, 31 May 2018 06:12:04 +0000 (14:12 +0800)]
dts: change all txlx/axg/g12a/g12b dts to use spicc upstream driver.
PD#164751: dts: change all txlx/axg/g12a/g12b dts to use spicc upstream driver.
1. change to use the unified name "spicc0/1".
2. change axg compatible from "amlogic, spicc" to "amlogic,meson-axg-spicc"
to use upstream driver.
3. change txlx compatible from "amlogic, spicc" to "amlogic,meson-txlx-spicc"
to use upstream driver.
3. change g12a compatible from "amlogic, spicc" to "amlogic,meson-g12a-spicc"
to use upstream driver.
4. add node of "amlogic,meson-g12b-spicc" for g12b to use upstream driver.
Change-Id: I587127361fa2ada48332cc01857f2200709d597e
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
Nan Li [Tue, 22 May 2018 08:16:31 +0000 (16:16 +0800)]
sd: g12a: optimize sd & wifi TDMA
PD#166884: optimize sd inval irq error,
when sd insert wifi running. wifi is data1.
Change-Id: I6de4f519d3bacec7d9ab4eec4fc9b0cfc6b5d07d
Signed-off-by: Nan Li <nan.li@amlogic.com>
bichao.zheng [Fri, 6 Jul 2018 08:56:33 +0000 (16:56 +0800)]
pwm: meson: don't disable pwm when setting duty repeatedly
PD#169687: pwm: meson: don't disable pwm when setting duty repeatedly
There is an abnormally low about 20ms,when setting duty repeatedly.
Because setting the duty will disable pwm and then enable.Delete
this operation now.
Change-Id: I4bca5e61b4782da3160c14d8c73cd913d7e21db3
Signed-off-by: bichao.zheng <bichao.zheng@amlogic.com>
Hongmin Hua [Mon, 16 Jul 2018 03:36:31 +0000 (20:36 -0700)]
Revert "cec: modify the line check for g12a"
This reverts commit
b059eff24a7c5b434bcf521c164be0836ac47eb2.
Change-Id: I5fe67e218279d469e83231d2fd42cfaf0df23702
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
Yi Zhou [Fri, 13 Jul 2018 11:06:30 +0000 (19:06 +0800)]
hdmitx: hdmitx: fix a map size error when g12b return to trunk
PD#169639: hdmitx: fix a map size error when g12b return to trunk
Change-Id: If26755418cbed435533f8547f30859165b7518b2
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
hongmin hua [Thu, 5 Jul 2018 07:45:34 +0000 (15:45 +0800)]
cec: modify the line check for g12a
PD#168682: cec: modify the line check for g12a
Change-Id: Iad4b47e236f16313356dc9d719052c382311a913
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
Zhongfu Luo [Fri, 13 Jul 2018 10:21:59 +0000 (18:21 +0800)]
unifykey: fix bug for read/write efuse key
PD#168551: need to use unifykey to read/write efuse key
1.fix efuse config name to CONFIG_AMLOGIC_EFUSE
2.add correct efuse key read funciton
Change-Id: I415f1b68d5de090220b1bd96db299452af176626
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
Sunny Luo [Sat, 28 Apr 2018 02:15:15 +0000 (10:15 +0800)]
spicc: add dma and enhance features of axg/txhd/g12a/g12b.
PD#164751: spicc: add dma and enhance features of axg/txhd/g12a/g12b.
1. fix TESTREG bits defination error;
2. fix cs-gpio error in slave setup;
3. reset fifo to avoid successive fifo error before tansfer;
4. add enhance feature of cs-preload delay control;
5. add auto io delay control;
6. add enhance feature of tt/ti delay control;
7. fix clk error which occurred certainly when sencond spicc added;
8. surpport both auto core clk and fixed core clk rate setting:
set dts "fixed_core_rate = <
200000000(example)>" to use fixed
core rate. otherwise, to use auto core clk.
9. support loop-back mode;
10. support DMA transfer;
11. must delete 1000M from parent clk.
12. It will be wrong when enhance divider=2. we have to add a flag
CLK_DIVIDER_PROHIBIT_ZERO to shield against it.
Change-Id: I820a52e6d31d3fe2e3615a0f4c5a07c17d11914d
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
Ting Wang [Tue, 10 Jul 2018 09:19:47 +0000 (17:19 +0800)]
dts:add region_code key[1/2]
PD# 169693
add region_code key to change wifi local
Change-Id: I60b52e82b69128a90fbd9f72f0de8b46ccd04e7e
Signed-off-by: Ting Wang <ting.wang@amlogic.com>
projects / platform / kernel / linux-amlogic.git / log