drm/i915: Report -EFAULT before pwrite fast path into shmemfs

When pwriting into shmemfs, the fast path pagecache_write does not
notice when it is writing to beyond the end of the truncated shmemfs
inode. Report -EFAULT directly when we try to use pwrite into the
!I915_MADV_WILLNEED object.

Fixes: 7c55e2c5772d ("drm/i915: Use pagecache write to prepopulate shmemfs from pwrite-ioctl")
Testcase: igt/gem_madvise/dontneed-before-pwrite
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016202732.25459-1-chris@chris-wilson.co.uk

drm/i915: Remove mostly duplicated video DIP handling from PSR code

Now that the infoframe hooks are part of the intel_dig_port, we can use
the normal .write_infoframe() hook to update the VSC SDP. We do need to
deal with the size difference between the VSC DIP and the others though.

Another minor snag is that the compiler will complain to use if we keep
using enum hdmi_infoframe_type type and passing in the DP define instead,
so et's just change to unsigned int all over for the inforframe type.

v2: Rebase due to other PSR changes

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013194051.19286-1-ville.syrjala@linux.intel.com

drm/i915/cnl: Fix PLL initialization for HDMI.

HDMI Mode selection on CNL is on CFGCR0 for that PLL, not
on in a global CTRL1 as it was on SKL.

The original patch addressed this difference, but leaving behind
this single entry here. So we were checking the wrong bits during
the PLL initialization and consequently avoiding the CFGCR1 setup
during HDMI initialization. Luckly when only HDMI was in use BIOS
had already setup this for us. But the dual display with hot plug
were messed up.

Fixes: a927c927de34 ("drm/i915/cnl: Initialize PLLs")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Kahola, Mika <mika.kahola@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003220859.21352-3-rodrigo.vivi@intel.com

drm/i915/cnl: Fix PLL mapping.

On PLL Enable sequence we need to "Configure DPCLKA_CFGCR0 to turn on
the clock for the DDI and map the DPLL to the DDI"

So we first do the map and then we unset DDI_CLK_OFF to turn the clock
on. We do this in 2 separated steps.

However, on this second step where we should only unset the off bit we are
also unmapping the ddi from the pll. So we end up using the pll 0
for almost everything. Consequently breaking cases with more than one
display.

Fixes: 555e38d27317 ("drm/i915/cnl: DDI - PLL mapping")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Kahola, Mika <mika.kahola@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003220859.21352-2-rodrigo.vivi@intel.com

drm/i915: Add in-flight request details to intel_engine_dump()

In the intel_engine_cs dumper, we were showing the request details for
the request queue but not of those requests already passed to the hw
(just a summary of the seqno). If we show those details, we can then
eliminate the entirely redundant and forgotten debugfs/i915_gem_request

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171015204310.17045-1-chris@chris-wilson.co.uk
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com>

drm/i915: Skip HW reinitialisation on resume if still wedged

If we fail to recover the HW state upon resume (i.e. our attempt to
clear the wedged bit and reset during i915_gem_sanitize() fails), then
skip the HW restart inside i915_gem_init_hw(). We will ultimately do the
HW restart when successfully unwedging and resetting the HW later,
but attempting to restore a wedged device upon resume is risky as the HW
is in an unknown state.

v2: Suppress the error message when detecting the already wedged HW.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103240
Testcase: igt/gem_eio/in-flight-suspend
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171015143725.27764-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915: Trim struct_mutex hold duration for i915_gem_free_objects

We free objects in bulk after they wait for their RCU grace period.
Currently, we take struct_mutex and unbind all the objects. This can lead
to a long lock duration during which time those objects have their pages
unfreeable (i.e. the shrinker is prevented from reaping those pages). If
we only process a single object under the struct_mutex and then free the
pages, the number of objects locked away from the shrinker is minimal
and we allow regular clients better access to struct_mutex if they need
it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013202621.7276-9-chris@chris-wilson.co.uk

drm/i915: Only free the oldest stale object before a fresh allocation

Inspired by Tvrtko's critique of the reaping of the stale contexts
before allocating a new one, also limit the freed object reaping to the
oldest stale object before allocating a fresh object. Unlike contexts,
objects may have radically different sizes of backing storage, but
similar to contexts, while we want to prevent starvation due to
excessive freed lists, we also do not want to delay fresh allocations
for too long. Only freeing the oldest on the freed object list before
each allocation is a reasonable compromise.

v2: Only a single consumer of llist_del_first() is allowed (although
multiple llist_add are still allowed in parallel). Unlike
i915_gem_context, i915_gem_flush_free_objects() is itself not serialized
and so we need to add our own spinlock. Otherwise KASAN eventually spots
a use-after-free for the race on *first->next.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013202621.7276-8-chris@chris-wilson.co.uk

drm/i915: Set our shrinker->batch to 4096 (~16MiB)

Prefer to defer activating our GEM shrinker until we have a few
megabytes to free; or we have accumulated sufficient mempressure by
deferring the reclaim to force a shrink. The intent is that because our
objects may typically be large, we are too effective at shrinking and
are not rewarded for freeing more pages than the batch. It will also
defer the initial shrinking to hopefully put it at a lower priority than
say the buffer cache (although it will balance out over a number of
reclaims, with GEM being more bursty).

v2: Give it a feedback system to try and tune the batch size towards
an effective size for the available objects.
v3: Start keeping track of shrinker stats in debugfs
v4: Protect against finding no shrinkable objects (div-by-zero)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013202621.7276-7-chris@chris-wilson.co.uk

drm/i915: Wire up shrinkctl->nr_scanned

shrink_slab() allows us to report back the number of objects we
successfully scanned (out of the target shrinkctl->nr_to_scan). As
report the number of pages owned by each GEM object as a separate item
to the shrinker, we cannot precisely control the number of shrinker
objects we scan on each pass; and indeed may free more than requested.
If we fail to tell the shrinker about the number of objects we process,
it will continue to hold a grudge against us as any objects left
unscanned are added to the next reclaim -- and so we will keep on
"unfairly" shrinking our own slab in comparison to other slabs.

v2: fixup the misplaced addition, we want to count everything we scan
(to match the number we reported earlier) not just the objects we
successfully validated and freed.

References: 912d572d63b8 ("drm/i915: wire up shrinkctl->nr_scanned")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013202621.7276-6-chris@chris-wilson.co.uk

drm/i915: Move dev_priv->mm.[un]bound_list to its own lock

Remove the struct_mutex requirement around dev_priv->mm.bound_list and
dev_priv->mm.unbound_list by giving it its own spinlock. This reduces
one more requirement for struct_mutex and in the process gives us
slightly more accurate unbound_list tracking, which should improve the
shrinker - but the drawback is that we drop the retirement before
counting so i915_gem_object_is_active() may be stale and lead us to
underestimate the number of objects that may be shrunk (see commit
bed50aea61df ("drm/i915/shrinker: Flush active on objects before
counting")).

v2: Crosslink the spinlock to the lists it protects, and btw this
changes s/obj->global_link/obj->mm.link/
v3: Fix decoupling of old links in i915_gem_object_attach_phys()
v3.1: Fix the fix, only unlink if it was linked
v3.2: Use a local for to_i915(obj->base.dev)->mm.obj_lock

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016114037.5556-1-chris@chris-wilson.co.uk

drm/i915: Remove walk over obj->vma_list for the shrinker

In the next patch, we want to reduce the lock coverage within the
shrinker, and one of the dangerous walks we have is over obj->vma_list.
We are only walking the obj->vma_list in order to check whether it has
been permanently pinned by HW access, typically via use on the scanout.
But we have a couple of other long term pins, the context objects for
which we currently have to check the individual vma pin_count. If we
instead mark these using obj->pin_display, we can forgo the dangerous
and sometimes slow list iteration.

v2: Rearrange code to try and avoid confusion from false associations
due to arrangement of whitespace along with rebasing on obj->pin_global.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013202621.7276-4-chris@chris-wilson.co.uk

drm/i915: Drop debugfs/i915_gem_pin_display

It has now lost its meaning (it shows more than just pin_display), I do
not believe that we are using in preference to the complete listing from
i915_gem_gtt, or the listing from i915_gem_framebuffer, or the listing
of active display objects in i915_display_info.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013202621.7276-3-chris@chris-wilson.co.uk

drm/i915: Rename obj->pin_display to obj->pin_global

In the next patch, we want to extend use of the global pin counter for
semi-permanent pinning of context/ring objects. Given that we plan to
extend the usage to encompass a disparate set of objects, we want a name
that reflects both and should entail less confusion.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013202621.7276-2-chris@chris-wilson.co.uk

drm/i915: Refactor testing obj->mm.pages

Since we occasionally stuff an error pointer into obj->mm.pages for a
semi-permanent or even permanent failure, we have to be more careful and
not just test against NULL when deciding if the object has a complete
set of its concurrent pages.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013202621.7276-1-chris@chris-wilson.co.uk

drm/i915/cnl: WaRsUseTimeoutMode

Apparently RC6 residency is lower than expected
with EI mode for most of the cases on CNL A0, B0 and C0.

This Wa doesn't solve our lower residency, but I
believe it is better to have it since EI is not
expected to work by HW engineers anyways.

Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170822235828.18322-1-rodrigo.vivi@intel.com

drm/i915/huc: Move fw select function

No functional change. Just place the function closer to related
definitions.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-15-michal.wajdeczko@intel.com

drm/i915/guc: Update Guc messages on load failure

In case of GuC firmware loading failure we were reporting
DRM_ERROR also for case when GuC loading was not strictly
required.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-14-michal.wajdeczko@intel.com

drm/i915/uc: Unify firmware loading

Firmware loading for GuC and HuC are similar. Move common code
into generic function for maximum reuse.

v2: change message levels (Chris)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-13-michal.wajdeczko@intel.com

drm/i915: Update DMC firmware load error messages

Some of the error messages from DMC load were too generic and
may be confusing for the user. Lets explicitly add DMC words there.
Also as homepage of DMC firmware is same as for the GuC and Huc,
lets reuse URL definition.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-12-michal.wajdeczko@intel.com

drm/i915/uc: Add message with firmware url

In case of firmware fetch failure we should help user
find latest firmware. URL macro duplication from csr.c
will be fixed in upcoming patch.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-11-michal.wajdeczko@intel.com

drm/i915/uc: Improve debug messages in firmware fetch

Time to remove less important info and make messages clear
and consistent.

v2: change some message levels (Chris)
v3: restore DRM_WARN (Chris)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #2
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-10-michal.wajdeczko@intel.com

drm/i915/guc: Pick better place for Guc final status message

GuC status message printed right after firmware upload may be too
optimistic, as we may fail on subsequent steps. Move that message
to the end of intel_uc_init_hw where we know the status for sure.

v2: use dev_info (Chris)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-9-michal.wajdeczko@intel.com

drm/i915/uc: Check all firmwares against WOPCM size

Both GuC and HuC firmwares will be moved into WOPCM so
we can check ucode size early for both cases.

Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-8-michal.wajdeczko@intel.com

drm/i915/guc: Reorder functions in intel_guc_fw.c

Functions should be defined in their use order.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-7-michal.wajdeczko@intel.com

drm/i915/guc: Rename intel_guc_loader.c to intel_guc_fw.c

Remaining functions in intel_guc_loader.c were focused around
GuC firmware. Rename them to match object-verb pattern and
rename file itself.

Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-6-michal.wajdeczko@intel.com

drm/i915/guc: Move doc near related definitions

After GuC code reorg some documentation was left in wrong
place. Move it closer to corresponding definitions.

v2: use consistent name for the GuC (Sagar)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-5-michal.wajdeczko@intel.com

drm/i915/guc: Small fixups post code move

Existing code needs some style fixes. To avoid polluting
pure move patch, do it now as separate step.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-4-michal.wajdeczko@intel.com

drm/i915/guc: Move GuC boot param initialization out of xfer

We want to keep ucode xfer functions separate from other
initialization. Once separated, add explicit forcewake.

v2: use BLITTER domain only and add comment (Daniele)

Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #1
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-3-michal.wajdeczko@intel.com

drm/i915: Move intel_guc_wopcm_size to intel_guc.c

Function intel_guc_wopcm_size didn't fit well in the old place.
With this move upcoming cleanup will be simpler.

Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-2-michal.wajdeczko@intel.com

drm/i915: enable to read CSB and CSB write pointer from HWSP in GVT-g VM

Let GVT-g VM read the CSB and CSB write pointer from virtual HWSP, not all
the host support this feature, need to check the BIT(3) of caps in PVINFO.

v3 : Remove unnecessary comments.
v4 : Separate VM enable patch with GVT-g implementation patch due to code
dependency.
v5 : Use inline for GVT virtual HWSP caps check function.
v6 : Comments refine.

Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1508039725-1066-1-git-send-email-weinan.z.li@intel.com

drm/i915: Use bdw_ddi_translations_fdi for Broadwell

The compiler warns:

drivers/gpu/drm/i915/intel_ddi.c:118:35: warning: ‘bdw_ddi_translations_fdi’ defined but not used

Lo and behold, if we look at intel_ddi_get_buf_trans_fdi(), it uses
hsw_ddi_translations_fdi[] for both Haswell and *Broadwell*

Fixes: 7d1c42e679f9 ("drm/i915: Refactor code to select the DDI buf translation table")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.12+
Link: https://patchwork.freedesktop.org/patch/msgid/20171013154735.27163-1-chris@chris-wilson.co.uk
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Always stop the rings before a missing GPU reset

Always try to stop the rings, even if the GPU reset itself has been
disabled (via modparam i915.reset). This should at least stop the hw
from spinning in the background consuming resources (e.g. power and
memory bandwidth) letting the system rest-in-peace.

References: https://bugs.freedesktop.org/show_bug.cgi?id=103260
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013131218.18013-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Keep the rings stopped until they have been re-initialized

Before modifying the ring register (RING_START, HEAD, TAIL, CTL) we
first make sure it is stopped (or else the hw may not resample the
registers). However, we do not need to let the hw restart until after we
have reprogrammed all the rings. This should help prevent situations
where pending operations on the ring may resume (because we are trying
to re-initialize following an unsuccessful GPU hang, i.e. from
i915_gem_unset_wedged).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103260
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013131218.18013-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Stop asserting on set-wedged vs nop_submit_request ordering

Since the removal of the stop_machine(), it is allowed and expected for
the nop_submit_request() and nop_complete_submit_request() to run in
parallel to the i915_gem_set_wedged() processing. As such we can no
longer assert that i915_gem_set_wedged() has completed inside the
stop_machine prior to the individual nop_submit_request execution.

Fixes: af7a8ffad9c5 ("drm/i915: Use rcu instead of stop_machine in set_wedged")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171012204019.3557-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Split intel_enable_ddi() into DP and HDMI variants

Untangle intel_enable_ddi() by splitting it into DP and HDMI specific
variants.

v2: Keep using intel_ddi_get_encoder_port() for now

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010121207.570-10-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Plumb crtc_state etc. directly to intel_ddi_pre_enable_{dp,hdmi}()

Rather that plumb the link parameters separately to
intel_ddi_pre_enable_dp() let's just pass the entire crtc state.

intel_ddi_pre_enable_hdmi() already took the crtc state, but for some
reason intel_ddi_pre_enable() still wanted to extract has_infoframe
from therein and pass it in separately. Let's not do that since it's
pointless.

v2: Rebase due to more code getting pulled into the DDI hooks

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010121207.570-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Split intel_disable_ddi() into DP vs. HDMI variants

Untangle intel_disable_ddi() by splitting it into DP and HDMI specific
variants.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010121207.570-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Remove useless eDP check from intel_ddi_pre_enable_dp()

intel_edp_panel_on() will itself do the is_edp() check, so the caller
doesn't have to bother. Pre-DDI code doesn't bother, so let's follow the
same approach for DDI.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010121207.570-7-ville.syrjala@linux.intel.com

drm/i915: Split intel_ddi_post_disable() into DP vs. HDMI variants

To clean up the mess in intel_ddi_post_disable() split it into two
clean variants for HDMI and DP.

v2: Rebase due to MST DPMS changes

Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010121207.570-6-ville.syrjala@linux.intel.com

drm/i915: Inline the required bits of intel_ddi_post_disable() into intel_ddi_fdi_post_disable()

To untangle the mess that is intel_ddi_post_disable() move the the bits
needed by FDI into intel_ddi_fdi_post_disable(). This way we can stop
worrying about FDI in intel_ddi_post_disable().

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010121207.570-5-ville.syrjala@linux.intel.com

drm/i915: Extract intel_disable_ddi_buf()

Extract the code to disable the DDI_BUF_CTL into small helper. This
will allows us to detangle the encoder type mess in
intel_ddi_post_disable().

v2: Keep using intel_ddi_get_encoder_port() for now

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010121207.570-4-ville.syrjala@linux.intel.com

drm/i915: Extract intel_ddi_clk_disable()

Pull the code to disable the port clock into a function. We already have
the intel_ddi_clk_select() counterpart.

v2: Keep using intel_ddi_get_encoder_port() for now (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010121207.570-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Dump 'output_types' in crtc state dump

To make it easier to debug things let's dump the output types bitmask in
the crtc state dump. And to make life that much better, let's pretty
print it as a a human reaadable string as well.

v2: Have the caller pass in the buffer (Chris)
    #undef OUTPUT_TYPE (Jani)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010121207.570-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Replace *_reference/unreference() or *_ref/unref with _get/put()

Replace instances of drm_framebuffer_reference/unreference() with
*_get/put() suffixes and drm_dev_unref with *_put() suffix
because get/put is shorter and consistent with the
kernel use of *_get/put suffixes.
Done with following coccinelle semantic patch

@@
expression ex;
@@

(
-drm_framebuffer_unreference(ex);
+drm_framebuffer_put(ex);
|
-drm_dev_unref(ex);
+drm_dev_put(ex);
|
-drm_framebuffer_reference(ex);
+drm_framebuffer_get(ex);
)

Signed-off-by: Harsha Sharma <harshasharmaiitr@gmail.com>
[danvet: Drop the drm_dev_put change for now, to make the patch apply
with out a backmerge.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009120643.11953-1-harshasharmaiitr@gmail.com

drm/i915: Get rid of hardcoded pipes

Favor for_each_pipe() macro when looping through pipes.

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507890286-16214-1-git-send-email-mika.kahola@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Add retries for LSPCON detection

We read the dp dual mode Adapter identifier to detect the
LSPCON device. It's been observed from the CI testing that in
few cases, this read can get delayed or fail. For such scenarios,
LSPCON vendors suggest to retry the read operation.

This patch adds retry in the probe function, while reading
LSPCON identifier.

V3: added this patch in the series

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102294
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102295
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102359
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103186
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507630064-17908-4-git-send-email-shashank.sharma@intel.com

drm/i915: Don't give up waiting on INVALID_MODE

Our current logic to read LSPCON's current mode, stops retries and
breaks wait-loop, if it gets LSPCON_MODE_INVALID as return from the
core function. This doesn't allow us to try reading the mode again.

This patch removes this condition and allows retries reading
the currnt mode until timeout.

This also fixes/prevents some of the noise in form of debug messages
while running IGT CI test cases.

V2: rebase, added r-b
V2: changed some debug message levels from debug->error and
    error->debug in lspcon_get_current_mode function.
V3: Rebase

Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102294
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102295
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102359
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103186
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Mahesh Kumar <Mahesh1.kumar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507630064-17908-3-git-send-email-shashank.sharma@intel.com

drm: Add retries for lspcon mode detection

From the CI builds, its been observed that during a driver
reload/insert, dp dual mode read function sometimes fails to
read from LSPCON device over i2c-over-aux channel.

This patch:
- adds some delay and few retries, allowing a scope for these
  devices to settle down and respond.
- changes one error log's level from ERROR->DEBUG as we want
  to call it an error only after all the retries are exhausted.

V2: Addressed review comments from Jani (for loop for retry)
V3: Addressed review comments from Imre (break on partial read too)
V3: Addressed review comments from Ville/Imre (Add the retries
    exclusively for LSPCON, not for all dp_dual_mode devices)
V4: Added r-b from Imre, sending it to dri-devel (Jani)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102294
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102295
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102359
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103186
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507826408-19322-1-git-send-email-shashank.sharma@intel.com

drm/i915/bdw: Fix DP_AUX_CH_CTL_TIME_OUT setting

Per BSpec, 400us is "BDW+ Do not use this setting." - not just PORT_A.
Set BDW to 600us unconditionally.

v2:
-Split in to two patches (Rodrigo)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171012213037.4245-2-james.ausmus@intel.com

drm/i915: Fix DP_AUX_CH_CTL_TIME_OUT naming

Rename DP_AUX_CH_CTL_TIME_OUT_1600us to DP_AUX_CH_CTL_TIME_OUT_MAX, as
the meaning of the (3 << 26) value varies per platform, but it's always the
maximum timeout for that platform. Pre-CNL it means 1600us, and for CNL
it means 3200us.

v2:
-Split in to two patches (Rodrigo)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171012213037.4245-1-james.ausmus@intel.com

drm/i915/selftests: Exercise adding requests to a full GGTT

A bug recently encountered involved the issue where are we were
submitting requests to different ppGTT, each would pin a segment of the
GGTT for its logical context and ring. However, this is invisible to
eviction as we do not tie the context/ring VMA to a request and so do
not automatically wait upon it them (instead they are marked as pinned,
preventing eviction entirely). Instead the eviction code must flush those
contexts by switching to the kernel context. This selftest tries to
fill the GGTT with contexts to exercise a path where the
switch-to-kernel-context failed to make forward progress and we fail
with ENOSPC.

v2: Make the hole in the filled GGTT explicit.
v3: Swap out the arbitrary timeout for a private notification from
i915_gem_evict_something()

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171012125726.14736-3-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915/selftests: Wrap a timer into a i915_sw_fence

For some selftests, we want to issue requests but delay them going to
hardware. Furthermore, we don't want those requests to block
indefinitely (or else we may hang the driver and block testing) so we
want to employ a timeout. So naturally we want a fence that is
automatically signaled by a timer.

v2: Add kselftests.
v3: Limit the API available to selftests; there isn't an overwhelming
reason to export it universally.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171012125726.14736-2-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Fix eviction when the GGTT is idle but full

In the full-ppgtt world, we can fill the GGTT full of context objects.
These context objects are currently implicitly tracked by the requests
that pin them i.e. they are only unpinned when the request is completed
and retired, but we do not have the link from the vma to the request
(anymore). In order to unpin those contexts, we have to issue another
request and wait upon the switch to the kernel context.

The bug during eviction was that we assumed that a full GGTT meant we
would have requests on the GGTT timeline, and so we missed situations
where those requests where merely in flight (and when even they have not
yet been submitted to hw yet). The fix employed here is to change the
already-is-idle test to no look at the execution timeline, but count the
outstanding requests and then check that we have switched to the kernel
context. Erring on the side of overkill here just means that we stall a
little longer than may be strictly required, but we only expect to hit
this path in extreme corner cases where returning an erroneous error is
worse than the delay.

v2: Logical inversion when swapping over branches.

Fixes: 80b204bce8f2 ("drm/i915: Enable multiple timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171012125726.14736-1-chris@chris-wilson.co.uk

drm/i915: Start tracking PSR state in crtc state

Add the minimal amount of PSR tracking into the crtc state. This allows
precomputing the possibility of using PSR correctly, and it means we can
safely call the psr enable/disable functions for any DP endcoder.

As a nice bonus we get rid of some more crtc->config usage, which we
want to kill off eventually.

v2: Fix 'goto unlock' fail in intel_psr_enable() (Jani)
    Check intel_dp_is_edp() in is_edp_psr() (Jani)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171012130201.21318-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Update DRIVER_DATE to 20171012

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Simplify intel_sanitize_enable_ppgtt

Remove dead code around has_aliasing_ppgtt condition.

Suggested-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010143355.16577-1-joonas.lahtinen@linux.intel.com

drm/i915/userptr: Drop struct_mutex before cleanup

Purely to silence lockdep, as we know that no bo can exist at this time
and so the inversion is impossible. Nevertheless, lockdep currently
warns on unload:

[  137.522565] WARNING: possible circular locking dependency detected
[  137.522568] 4.14.0-rc4-CI-CI_DRM_3209+ #1 Tainted: G     U
[  137.522570] ------------------------------------------------------
[  137.522572] drv_module_relo/1532 is trying to acquire lock:
[  137.522574]  ("i915-userptr-acquire"){+.+.}, at: [<ffffffff8109a831>] flush_workqueue+0x91/0x540
[  137.522581]
               but task is already holding lock:
[  137.522583]  (&dev->struct_mutex){+.+.}, at: [<ffffffffa014fb3f>] i915_gem_fini+0x3f/0xc0 [i915]
[  137.522605]
               which lock already depends on the new lock.

[  137.522608]
               the existing dependency chain (in reverse order) is:
[  137.522611]
               -> #3 (&dev->struct_mutex){+.+.}:
[  137.522615]        __lock_acquire+0x1420/0x15e0
[  137.522618]        lock_acquire+0xb0/0x200
[  137.522621]        __mutex_lock+0x86/0x9b0
[  137.522623]        mutex_lock_interruptible_nested+0x1b/0x20
[  137.522640]        i915_mutex_lock_interruptible+0x51/0x130 [i915]
[  137.522657]        i915_gem_fault+0x20b/0x720 [i915]
[  137.522660]        __do_fault+0x1e/0x80
[  137.522662]        __handle_mm_fault+0xa08/0xed0
[  137.522664]        handle_mm_fault+0x156/0x300
[  137.522666]        __do_page_fault+0x2c5/0x570
[  137.522668]        do_page_fault+0x28/0x250
[  137.522671]        page_fault+0x22/0x30
[  137.522672]
               -> #2 (&mm->mmap_sem){++++}:
[  137.522677]        __lock_acquire+0x1420/0x15e0
[  137.522679]        lock_acquire+0xb0/0x200
[  137.522682]        down_read+0x3e/0x70
[  137.522699]        __i915_gem_userptr_get_pages_worker+0x141/0x240 [i915]
[  137.522701]        process_one_work+0x233/0x660
[  137.522704]        worker_thread+0x4e/0x3b0
[  137.522706]        kthread+0x152/0x190
[  137.522708]        ret_from_fork+0x27/0x40
[  137.522710]
               -> #1 ((&work->work)){+.+.}:
[  137.522714]        __lock_acquire+0x1420/0x15e0
[  137.522717]        lock_acquire+0xb0/0x200
[  137.522719]        process_one_work+0x206/0x660
[  137.522721]        worker_thread+0x4e/0x3b0
[  137.522723]        kthread+0x152/0x190
[  137.522725]        ret_from_fork+0x27/0x40
[  137.522727]
               -> #0 ("i915-userptr-acquire"){+.+.}:
[  137.522731]        check_prev_add+0x430/0x840
[  137.522733]        __lock_acquire+0x1420/0x15e0
[  137.522735]        lock_acquire+0xb0/0x200
[  137.522738]        flush_workqueue+0xb4/0x540
[  137.522740]        drain_workqueue+0xd4/0x1b0
[  137.522742]        destroy_workqueue+0x1c/0x200
[  137.522758]        i915_gem_cleanup_userptr+0x15/0x20 [i915]
[  137.522770]        i915_gem_fini+0x5f/0xc0 [i915]
[  137.522782]        i915_driver_unload+0x122/0x180 [i915]
[  137.522794]        i915_pci_remove+0x19/0x30 [i915]
[  137.522797]        pci_device_remove+0x39/0xb0
[  137.522800]        device_release_driver_internal+0x15d/0x220
[  137.522803]        driver_detach+0x40/0x80
[  137.522805]        bus_remove_driver+0x58/0xd0
[  137.522807]        driver_unregister+0x2c/0x40
[  137.522809]        pci_unregister_driver+0x36/0xb0
[  137.522828]        i915_exit+0x1a/0x8b [i915]
[  137.522831]        SyS_delete_module+0x18c/0x1e0
[  137.522834]        entry_SYSCALL_64_fastpath+0x1c/0xb1
[  137.522835]
               other info that might help us debug this:

[  137.522838] Chain exists of:
                 "i915-userptr-acquire" --> &mm->mmap_sem --> &dev->struct_mutex

[  137.522844]  Possible unsafe locking scenario:

[  137.522846]        CPU0                    CPU1
[  137.522848]        ----                    ----
[  137.522850]   lock(&dev->struct_mutex);
[  137.522852]                                lock(&mm->mmap_sem);
[  137.522854]                                lock(&dev->struct_mutex);
[  137.522857]   lock("i915-userptr-acquire");
[  137.522859]
                *** DEADLOCK ***

[  137.522862] 3 locks held by drv_module_relo/1532:
[  137.522864]  #0:  (&dev->mutex){....}, at: [<ffffffff8161d47b>] device_release_driver_internal+0x2b/0x220
[  137.522869]  #1:  (&dev->mutex){....}, at: [<ffffffff8161d489>] device_release_driver_internal+0x39/0x220
[  137.522873]  #2:  (&dev->struct_mutex){+.+.}, at: [<ffffffffa014fb3f>] i915_gem_fini+0x3f/0xc0 [i915]
[  137.522888]
               stack backtrace:
[  137.522891] CPU: 0 PID: 1532 Comm: drv_module_relo Tainted: G     U          4.14.0-rc4-CI-CI_DRM_3209+ #1
[  137.522894] Hardware name:                  /NUC7i5BNB, BIOS BNKBL357.86A.0048.2017.0704.1415 07/04/2017
[  137.522897] Call Trace:
[  137.522900]  dump_stack+0x68/0x9f
[  137.522902]  print_circular_bug+0x235/0x3c0
[  137.522905]  ? lockdep_init_map_crosslock+0x20/0x20
[  137.522908]  check_prev_add+0x430/0x840
[  137.522919]  ? i915_gem_fini+0x5f/0xc0 [i915]
[  137.522922]  ? __kernel_text_address+0x12/0x40
[  137.522925]  ? __save_stack_trace+0x66/0xd0
[  137.522928]  __lock_acquire+0x1420/0x15e0
[  137.522930]  ? __lock_acquire+0x1420/0x15e0
[  137.522933]  ? lockdep_init_map_crosslock+0x20/0x20
[  137.522936]  ? __this_cpu_preempt_check+0x13/0x20
[  137.522938]  lock_acquire+0xb0/0x200
[  137.522940]  ? flush_workqueue+0x91/0x540
[  137.522943]  flush_workqueue+0xb4/0x540
[  137.522945]  ? flush_workqueue+0x91/0x540
[  137.522948]  ? __mutex_unlock_slowpath+0x43/0x2c0
[  137.522951]  ? trace_hardirqs_on_caller+0xe3/0x1b0
[  137.522954]  drain_workqueue+0xd4/0x1b0
[  137.522956]  ? drain_workqueue+0xd4/0x1b0
[  137.522958]  destroy_workqueue+0x1c/0x200
[  137.522975]  i915_gem_cleanup_userptr+0x15/0x20 [i915]
[  137.522987]  i915_gem_fini+0x5f/0xc0 [i915]
[  137.523000]  i915_driver_unload+0x122/0x180 [i915]
[  137.523015]  i915_pci_remove+0x19/0x30 [i915]
[  137.523018]  pci_device_remove+0x39/0xb0
[  137.523021]  device_release_driver_internal+0x15d/0x220
[  137.523023]  driver_detach+0x40/0x80
[  137.523026]  bus_remove_driver+0x58/0xd0
[  137.523028]  driver_unregister+0x2c/0x40
[  137.523030]  pci_unregister_driver+0x36/0xb0
[  137.523049]  i915_exit+0x1a/0x8b [i915]
[  137.523052]  SyS_delete_module+0x18c/0x1e0
[  137.523055]  entry_SYSCALL_64_fastpath+0x1c/0xb1
[  137.523057] RIP: 0033:0x7f7bd0609287
[  137.523059] RSP: 002b:00007ffef694bc18 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
[  137.523062] RAX: ffffffffffffffda RBX: ffffffff81493f33 RCX: 00007f7bd0609287
[  137.523065] RDX: 0000000000000001 RSI: 0000000000000800 RDI: 0000564f999f9fc8
[  137.523067] RBP: ffffc90005c4ff88 R08: 0000000000000000 R09: 0000000000000080
[  137.523069] R10: 00007f7bd20ef8c0 R11: 0000000000000246 R12: 0000000000000000
[  137.523072] R13: 00007ffef694be00 R14: 0000000000000000 R15: 0000000000000000
[  137.523075]  ? __this_cpu_preempt_check+0x13/0x20

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171011141857.14161-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/dp: limit sink rates based on rate

Get rid of redundant intel_dp_num_rates(). We can simply look at the
rate and limit based on that.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009092959.29021-3-jani.nikula@intel.com

drm/i915/dp: centralize max source rate conditions more

Turn intel_dp_source_supports_hbr2() into a simple helper to query the
pre-filled source rates array, and move the conditions about which
platforms support which rates to the single point of truth in
intel_dp_set_source_rates().

This also reduces the code paths you have to think about in the source
rates initialization in intel_dp_set_source_rates(), making it easier to
grasp.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009092959.29021-2-jani.nikula@intel.com

drm/i915: Allow PCH platforms fall back to BIOS LVDS mode

With intel_encoder_current_mode() using the normal state readout code it
actually works on PCH platforms as well. So let's nuke the PCH check from
intel_lvds_init(). I suppose there aren't any machines that actually
need this, but at least we get to eliminate a few lines of code, and one
FIXME.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009161951.22420-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Reuse normal state readout for LVDS/DVO fixed mode

Reuse the normal state readout code to get the fixed mode for LVDS/DVO
encoders. This removes some partially duplicated state readout code
from LVDS/DVO encoders. The duplicated code wasn't actually even
populating the negative h/vsync flags, leading to possible state checker
complaints. The normal readout code populates that stuff fully.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009161951.22420-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Use rcu instead of stop_machine in set_wedged

stop_machine is not really a locking primitive we should use, except
when the hw folks tell us the hw is broken and that's the only way to
work around it.

This patch tries to address the locking abuse of stop_machine() from

commit 20e4933c478a1ca694b38fa4ac44d99e659941f5
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Nov 22 14:41:21 2016 +0000

    drm/i915: Stop the machine as we install the wedged submit_request handler

Chris said parts of the reasons for going with stop_machine() was that
it's no overhead for the fast-path. But these callbacks use irqsave
spinlocks and do a bunch of MMIO, and rcu_read_lock is _real_ fast.

To stay as close as possible to the stop_machine semantics we first
update all the submit function pointers to the nop handler, then call
synchronize_rcu() to make sure no new requests can be submitted. This
should give us exactly the huge barrier we want.

I pondered whether we should annotate engine->submit_request as __rcu
and use rcu_assign_pointer and rcu_dereference on it. But the reason
behind those is to make sure the compiler/cpu barriers are there for
when you have an actual data structure you point at, to make sure all
the writes are seen correctly on the read side. But we just have a
function pointer, and .text isn't changed, so no need for these
barriers and hence no need for annotations.

Unfortunately there's a complication with the call to
intel_engine_init_global_seqno:

- Without stop_machine we must hold the corresponding spinlock.

- Without stop_machine we must ensure that all requests are marked as
  having failed with dma_fence_set_error() before we call it. That
  means we need to split the nop request submission into two phases,
  both synchronized with rcu:

  1. Only stop submitting the requests to hw and mark them as failed.

  2. After all pending requests in the scheduler/ring are suitably
  marked up as failed and we can force complete them all, also force
  complete by calling intel_engine_init_global_seqno().

This should fix the followwing lockdep splat:

======================================================
WARNING: possible circular locking dependency detected
4.14.0-rc3-CI-CI_DRM_3179+ #1 Tainted: G     U
------------------------------------------------------
kworker/3:4/562 is trying to acquire lock:
 (cpu_hotplug_lock.rw_sem){++++}, at: [<ffffffff8113d4bc>] stop_machine+0x1c/0x40

but task is already holding lock:
 (&dev->struct_mutex){+.+.}, at: [<ffffffffa0136588>] i915_reset_device+0x1e8/0x260 [i915]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #6 (&dev->struct_mutex){+.+.}:
       __lock_acquire+0x1420/0x15e0
       lock_acquire+0xb0/0x200
       __mutex_lock+0x86/0x9b0
       mutex_lock_interruptible_nested+0x1b/0x20
       i915_mutex_lock_interruptible+0x51/0x130 [i915]
       i915_gem_fault+0x209/0x650 [i915]
       __do_fault+0x1e/0x80
       __handle_mm_fault+0xa08/0xed0
       handle_mm_fault+0x156/0x300
       __do_page_fault+0x2c5/0x570
       do_page_fault+0x28/0x250
       page_fault+0x22/0x30

-> #5 (&mm->mmap_sem){++++}:
       __lock_acquire+0x1420/0x15e0
       lock_acquire+0xb0/0x200
       __might_fault+0x68/0x90
       _copy_to_user+0x23/0x70
       filldir+0xa5/0x120
       dcache_readdir+0xf9/0x170
       iterate_dir+0x69/0x1a0
       SyS_getdents+0xa5/0x140
       entry_SYSCALL_64_fastpath+0x1c/0xb1

-> #4 (&sb->s_type->i_mutex_key#5){++++}:
       down_write+0x3b/0x70
       handle_create+0xcb/0x1e0
       devtmpfsd+0x139/0x180
       kthread+0x152/0x190
       ret_from_fork+0x27/0x40

-> #3 ((complete)&req.done){+.+.}:
       __lock_acquire+0x1420/0x15e0
       lock_acquire+0xb0/0x200
       wait_for_common+0x58/0x210
       wait_for_completion+0x1d/0x20
       devtmpfs_create_node+0x13d/0x160
       device_add+0x5eb/0x620
       device_create_groups_vargs+0xe0/0xf0
       device_create+0x3a/0x40
       msr_device_create+0x2b/0x40
       cpuhp_invoke_callback+0xc9/0xbf0
       cpuhp_thread_fun+0x17b/0x240
       smpboot_thread_fn+0x18a/0x280
       kthread+0x152/0x190
       ret_from_fork+0x27/0x40

-> #2 (cpuhp_state-up){+.+.}:
       __lock_acquire+0x1420/0x15e0
       lock_acquire+0xb0/0x200
       cpuhp_issue_call+0x133/0x1c0
       __cpuhp_setup_state_cpuslocked+0x139/0x2a0
       __cpuhp_setup_state+0x46/0x60
       page_writeback_init+0x43/0x67
       pagecache_init+0x3d/0x42
       start_kernel+0x3a8/0x3fc
       x86_64_start_reservations+0x2a/0x2c
       x86_64_start_kernel+0x6d/0x70
       verify_cpu+0x0/0xfb

-> #1 (cpuhp_state_mutex){+.+.}:
       __lock_acquire+0x1420/0x15e0
       lock_acquire+0xb0/0x200
       __mutex_lock+0x86/0x9b0
       mutex_lock_nested+0x1b/0x20
       __cpuhp_setup_state_cpuslocked+0x53/0x2a0
       __cpuhp_setup_state+0x46/0x60
       page_alloc_init+0x28/0x30
       start_kernel+0x145/0x3fc
       x86_64_start_reservations+0x2a/0x2c
       x86_64_start_kernel+0x6d/0x70
       verify_cpu+0x0/0xfb

-> #0 (cpu_hotplug_lock.rw_sem){++++}:
       check_prev_add+0x430/0x840
       __lock_acquire+0x1420/0x15e0
       lock_acquire+0xb0/0x200
       cpus_read_lock+0x3d/0xb0
       stop_machine+0x1c/0x40
       i915_gem_set_wedged+0x1a/0x20 [i915]
       i915_reset+0xb9/0x230 [i915]
       i915_reset_device+0x1f6/0x260 [i915]
       i915_handle_error+0x2d8/0x430 [i915]
       hangcheck_declare_hang+0xd3/0xf0 [i915]
       i915_hangcheck_elapsed+0x262/0x2d0 [i915]
       process_one_work+0x233/0x660
       worker_thread+0x4e/0x3b0
       kthread+0x152/0x190
       ret_from_fork+0x27/0x40

other info that might help us debug this:

Chain exists of:
  cpu_hotplug_lock.rw_sem --> &mm->mmap_sem --> &dev->struct_mutex

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&dev->struct_mutex);
                               lock(&mm->mmap_sem);
                               lock(&dev->struct_mutex);
  lock(cpu_hotplug_lock.rw_sem);

 *** DEADLOCK ***

3 locks held by kworker/3:4/562:
 #0:  ("events_long"){+.+.}, at: [<ffffffff8109c64a>] process_one_work+0x1aa/0x660
 #1:  ((&(&i915->gpu_error.hangcheck_work)->work)){+.+.}, at: [<ffffffff8109c64a>] process_one_work+0x1aa/0x660
 #2:  (&dev->struct_mutex){+.+.}, at: [<ffffffffa0136588>] i915_reset_device+0x1e8/0x260 [i915]

stack backtrace:
CPU: 3 PID: 562 Comm: kworker/3:4 Tainted: G     U          4.14.0-rc3-CI-CI_DRM_3179+ #1
Hardware name:                  /NUC7i5BNB, BIOS BNKBL357.86A.0048.2017.0704.1415 07/04/2017
Workqueue: events_long i915_hangcheck_elapsed [i915]
Call Trace:
 dump_stack+0x68/0x9f
 print_circular_bug+0x235/0x3c0
 ? lockdep_init_map_crosslock+0x20/0x20
 check_prev_add+0x430/0x840
 ? irq_work_queue+0x86/0xe0
 ? wake_up_klogd+0x53/0x70
 __lock_acquire+0x1420/0x15e0
 ? __lock_acquire+0x1420/0x15e0
 ? lockdep_init_map_crosslock+0x20/0x20
 lock_acquire+0xb0/0x200
 ? stop_machine+0x1c/0x40
 ? i915_gem_object_truncate+0x50/0x50 [i915]
 cpus_read_lock+0x3d/0xb0
 ? stop_machine+0x1c/0x40
 stop_machine+0x1c/0x40
 i915_gem_set_wedged+0x1a/0x20 [i915]
 i915_reset+0xb9/0x230 [i915]
 i915_reset_device+0x1f6/0x260 [i915]
 ? gen8_gt_irq_ack+0x170/0x170 [i915]
 ? work_on_cpu_safe+0x60/0x60
 i915_handle_error+0x2d8/0x430 [i915]
 ? vsnprintf+0xd1/0x4b0
 ? scnprintf+0x3a/0x70
 hangcheck_declare_hang+0xd3/0xf0 [i915]
 ? intel_runtime_pm_put+0x56/0xa0 [i915]
 i915_hangcheck_elapsed+0x262/0x2d0 [i915]
 process_one_work+0x233/0x660
 worker_thread+0x4e/0x3b0
 kthread+0x152/0x190
 ? process_one_work+0x660/0x660
 ? kthread_create_on_node+0x40/0x40
 ret_from_fork+0x27/0x40
Setting dangerous option reset - tainting kernel
i915 0000:00:02.0: Resetting chip after gpu hang
Setting dangerous option reset - tainting kernel
i915 0000:00:02.0: Resetting chip after gpu hang

v2: Have 1 global synchronize_rcu() barrier across all engines, and
improve commit message.

v3: We need to protect the seqno update with the timeline spinlock (in
set_wedged) to avoid racing with other updates of the seqno, like we
already do in nop_submit_request (Chris).

v4: Use two-phase sequence to plug the race Chris spotted where we can
complete requests before they're marked up with -EIO.

v5: Review from Chris:
- simplify nop_submit_request.
- Add comment to rcu_read_lock section.
- Align comments with the new style.

v6: Remove unused variable to appease CI.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102886
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103096
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171011091019.1425-1-daniel.vetter@ffwll.ch

drm/i915: Introduce separate status variable for RC6 and LLC ring frequency setup

Defined new struct intel_rc6 to hold RC6 specific state and
intel_ring_pstate to hold ring specific state.

v2: s/intel_ring_pstate/intel_llc_pstate. Removed checks from
autoenable_* functions. (Chris)

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-13-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-12-chris@chris-wilson.co.uk

drm/i915: Create generic functions to control RC6, RPS

Prepared generic functions intel_enable_rc6, intel_disable_rc6,
intel_enable_rps and intel_disable_rps functions to setup RC6/RPS
based on platforms.

v2: Make intel_enable/disable_rc6/rps static. (Chris)

v3: Added lockdep_assert_held(dev_priv->pcu_lock) in new generic
functions. (Chris)
Removed WARN_ON(&dev_priv->pcu_lock) from lower level functions as generic
function now has lockdep_assert. Rebase.

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-12-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-11-chris@chris-wilson.co.uk

drm/i915: Create generic function to setup LLC ring frequency table

Prepared intel_update_ring_freq function to setup ring frequency
for applicable platforms determined by macro HAS_LLC.

v2: Replaced NEEDS_RING_FREQ_UPDATE with HAS_LLC macro. (Chris)
    Added check while calling from intel_enable_gt_powersave.

v3: s/intel_update_ring_freq/intel_enable_llc_pstate and created
new placeholder function intel_disable_llc_pstate. (Chris)

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-11-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-10-chris@chris-wilson.co.uk

drm/i915: Rename intel_enable_rc6 to intel_rc6_enabled

This function gives the status of RC6, whether disabled or if
enabled then which state. intel_enable_rc6 will be used for
enabling RC6 in the next patch.

v2: Rebase.

v3: Rebase.

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> #1
Reviewed-by: Ewelina Musial <ewelina.musial@intel.com> #1
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-10-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-9-chris@chris-wilson.co.uk

drm/i915: Name structure in dev_priv that contains RPS/RC6 state as "gt_pm"

Prepared substructure rps for RPS related state. autoenable_work is
used for RC6 too hence it is defined outside rps structure. As we do
this lot many functions are refactored to use intel_rps *rps to access
rps related members. Hence renamed intel_rps_client pointer variables
to rps_client in various functions.

v2: Rebase.

v3: s/pm/gt_pm (Chris)
Refactored access to rps structure by declaring struct intel_rps * in
many functions.

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> #1
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-9-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-8-chris@chris-wilson.co.uk

drm/i915: Move rps.hw_lock to dev_priv and s/hw_lock/pcu_lock

In order to separate GT PM related functionality into new structure
we are updating rps structure. hw_lock in it is used for display
related PCU communication too hence move it to dev_priv.

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-8-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-7-chris@chris-wilson.co.uk

drm/i915: Name i915_runtime_pm structure in dev_priv as "runtime_pm"

We were using dev_priv->pm for runtime power management related state.
This patch renames it to "runtime_pm" which looks more apt.

v2: s/rpm/runtime_pm (Chris)

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> #1
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-7-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-6-chris@chris-wilson.co.uk

drm/i915: Separate RPS and RC6 handling for CHV

This patch separates enable/disable of RC6 and RPS for CHV.

v2: Fixed comment.

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-6-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-5-chris@chris-wilson.co.uk

drm/i915: Separate RPS and RC6 handling for VLV

This patch separates enable/disable of RC6 and RPS for VLV.

v2: Removed unnecessary comments about forcewakes while enabling
RC6/RPS. Added changes to output turbo control status for VLV in
i915_frequency_info.

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-5-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-4-chris@chris-wilson.co.uk

drm/i915: Separate RPS and RC6 handling for BDW

This patch separates RC6 and RPS enabling for BDW.
RC6/RPS Disabling are handled through gen6 functions.
PM Programming guide recommends a sequence within forcewakes to
configure RC6, RPS and ring frequencies in sequence. With this
patch the order is still maintained.

v2: Update sequence numbers in RC6 programming and comment about
intent of reset_rps during gen8_enable_rps. (Radoslaw)

v3: Rebase.

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-4-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-3-chris@chris-wilson.co.uk

drm/i915: Remove superfluous IS_BDW checks and non-BDW changes from gen8_enable_rps

This patch removes all IS_BROADWELL checks and non-BDW changes from
gen8_enable_rps as it is called only for BROADWELL.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-3-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-2-chris@chris-wilson.co.uk

drm/i915: Separate RPS and RC6 handling for gen6+

This patch separates enable/disable of RC6 and RPS for gen6+
platforms prior to VLV.

v2: Fixed checkpatch issue. (Sagar)

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> #1
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-2-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-1-chris@chris-wilson.co.uk

drm/i915/selftests: ditch the kernel context

There's really no good reason to be using the kernel context for the
huge-page livetests. Also with the introduction of commit bef27bdb6cfb
("drm/i915: Assert we do not try to expand VMA for hugepage inside GGTT")
we start hitting the bug on in the selftests, since the kernel context
will always return true for i915_vma_is_ggtt(), so now seems like the
opportune time to instead create our own context.

Fixes: 4049866f0913 ("drm/i915/selftests: huge page tests")
Fixes: bef27bdb6cfb ("drm/i915: Assert we do not try to expand VMA for hugepage inside GGTT")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010133030.12112-1-matthew.auld@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Silently fallback to 4k scratch

If we fail to allocate a 64k hugepage for scratch, we try again with a
normal 4k page (with some loss of efficiency at runtime). As we handle
this gracefully, we do not need a noisy allocation failure warning.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010111005.13625-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Cleanup South Error Interrupts

Cleanup and parametrize the handling of South Error Interrupts (SERR_INT).

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507630626-23806-6-git-send-email-mika.kahola@intel.com

drm/i915: Favor for_each_pipe() macro

Favor for_each_pipe() macro when looping through pipes.

v2: use 'enum pipe pipe' instead of 'i'

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507630626-23806-5-git-send-email-mika.kahola@intel.com

drm/i915: Fold IRQ pipe masks

Fold IRQ pipe masks into one loop instead of hardcoding per pipe.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507630626-23806-4-git-send-email-mika.kahola@intel.com

drm/i915: Remove I915_MAX_PIPES dependency for DDB allocation

Remove dependency for I915_MAX_PIPES by replacing it with
for_each_pipe() macro.

v2: use 'enum pipe pipe' instead of 'i'

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507630626-23806-3-git-send-email-mika.kahola@intel.com

drm/i915: Don't relay on I915_MAX_PIPES

Let's remove the dependency on I915_MAX_PIPES. Instead, get the number
of pipes from platform information.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507630626-23806-2-git-send-email-mika.kahola@intel.com

drm/i915: Nuke the bogus kernel doc for i9xx_disable_pll()

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913140900.6972-6-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Pass crtc state to i9xx_enable_pll()

Pass the crtc state to i9xx_enable_pll() and use it rather than
crtc->config.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913140900.6972-5-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Parametrize CBR_DPLLBMD_PIPE defines

Apply a bit of polish by parametrizing the CBR_DPLLBMD_PIPE defines.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913140900.6972-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Use enum pipe for PCH transcoders

One more place where we've failed to switch to enum pipe when talking
about PCH transcoders.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010125556.25086-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Increase atomic update vblank evasion time with lockdep

All our mmio writes take forever with lockdep due to the constant
lock acquire&dropping we do. Ville has some patches to only acquire
the mmio spinlocks once instead for every single mmio, but those
aren't ready yet.

As an interim solution just extend our budget slightly when lockdep is
enabled, to avoid the rare and sporadic noise in CI.

v2: I forgot to add the FIXME comment ...

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=103169
References: https://bugs.freedesktop.org/show_bug.cgi?id=103124
References: https://bugs.freedesktop.org/show_bug.cgi?id=102403
References: https://bugs.freedesktop.org/show_bug.cgi?id=103020
References: https://bugs.freedesktop.org/show_bug.cgi?id=103019
References: https://bugs.freedesktop.org/show_bug.cgi?id=102723
References: https://bugs.freedesktop.org/show_bug.cgi?id=102544
References: https://bugs.freedesktop.org/show_bug.cgi?id=103180
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010091816.26898-1-daniel.vetter@ffwll.ch

drm/i915: Use execlists_num_ports instead of size of array

There is function to tell how many ports we have, so use it.
We still have direct relationship with array size and port count,
so no harm was done.

Fixes: 76e70087d360 ("drm/i915: Make execlist port count variable")
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010114857.13108-1-mika.kuoppala@intel.com

drm/i915: Preallocate our mmu notifier workequeu to unbreak cpu hotplug deadlock

4.14-rc1 gained the fancy new cross-release support in lockdep, which
seems to have uncovered a few more rules about what is allowed and
isn't.

This one here seems to indicate that allocating a work-queue while
holding mmap_sem is a no-go, so let's try to preallocate it.

Of course another way to break this chain would be somewhere in the
cpu hotplug code, since this isn't the only trace we're finding now
which goes through msr_create_device.

Full lockdep splat:

======================================================
WARNING: possible circular locking dependency detected
4.14.0-rc1-CI-CI_DRM_3118+ #1 Tainted: G     U
------------------------------------------------------
prime_mmap/1551 is trying to acquire lock:
 (cpu_hotplug_lock.rw_sem){++++}, at: [<ffffffff8109dbb7>] apply_workqueue_attrs+0x17/0x50

but task is already holding lock:
 (&dev_priv->mm_lock){+.+.}, at: [<ffffffffa01a7b2a>] i915_gem_userptr_init__mmu_notifier+0x14a/0x270 [i915]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #6 (&dev_priv->mm_lock){+.+.}:
       __lock_acquire+0x1420/0x15e0
       lock_acquire+0xb0/0x200
       __mutex_lock+0x86/0x9b0
       mutex_lock_nested+0x1b/0x20
       i915_gem_userptr_init__mmu_notifier+0x14a/0x270 [i915]
       i915_gem_userptr_ioctl+0x222/0x2c0 [i915]
       drm_ioctl_kernel+0x69/0xb0
       drm_ioctl+0x2f9/0x3d0
       do_vfs_ioctl+0x94/0x670
       SyS_ioctl+0x41/0x70
       entry_SYSCALL_64_fastpath+0x1c/0xb1

-> #5 (&mm->mmap_sem){++++}:
       __lock_acquire+0x1420/0x15e0
       lock_acquire+0xb0/0x200
       __might_fault+0x68/0x90
       _copy_to_user+0x23/0x70
       filldir+0xa5/0x120
       dcache_readdir+0xf9/0x170
       iterate_dir+0x69/0x1a0
       SyS_getdents+0xa5/0x140
       entry_SYSCALL_64_fastpath+0x1c/0xb1

-> #4 (&sb->s_type->i_mutex_key#5){++++}:
       down_write+0x3b/0x70
       handle_create+0xcb/0x1e0
       devtmpfsd+0x139/0x180
       kthread+0x152/0x190
       ret_from_fork+0x27/0x40

-> #3 ((complete)&req.done){+.+.}:
       __lock_acquire+0x1420/0x15e0
       lock_acquire+0xb0/0x200
       wait_for_common+0x58/0x210
       wait_for_completion+0x1d/0x20
       devtmpfs_create_node+0x13d/0x160
       device_add+0x5eb/0x620
       device_create_groups_vargs+0xe0/0xf0
       device_create+0x3a/0x40
       msr_device_create+0x2b/0x40
       cpuhp_invoke_callback+0xa3/0x840
       cpuhp_thread_fun+0x7a/0x150
       smpboot_thread_fn+0x18a/0x280
       kthread+0x152/0x190
       ret_from_fork+0x27/0x40

-> #2 (cpuhp_state){+.+.}:
       __lock_acquire+0x1420/0x15e0
       lock_acquire+0xb0/0x200
       cpuhp_issue_call+0x10b/0x170
       __cpuhp_setup_state_cpuslocked+0x134/0x2a0
       __cpuhp_setup_state+0x46/0x60
       page_writeback_init+0x43/0x67
       pagecache_init+0x3d/0x42
       start_kernel+0x3a8/0x3fc
       x86_64_start_reservations+0x2a/0x2c
       x86_64_start_kernel+0x6d/0x70
       verify_cpu+0x0/0xfb

-> #1 (cpuhp_state_mutex){+.+.}:
       __lock_acquire+0x1420/0x15e0
       lock_acquire+0xb0/0x200
       __mutex_lock+0x86/0x9b0
       mutex_lock_nested+0x1b/0x20
       __cpuhp_setup_state_cpuslocked+0x52/0x2a0
       __cpuhp_setup_state+0x46/0x60
       page_alloc_init+0x28/0x30
       start_kernel+0x145/0x3fc
       x86_64_start_reservations+0x2a/0x2c
       x86_64_start_kernel+0x6d/0x70
       verify_cpu+0x0/0xfb

-> #0 (cpu_hotplug_lock.rw_sem){++++}:
       check_prev_add+0x430/0x840
       __lock_acquire+0x1420/0x15e0
       lock_acquire+0xb0/0x200
       cpus_read_lock+0x3d/0xb0
       apply_workqueue_attrs+0x17/0x50
       __alloc_workqueue_key+0x1d8/0x4d9
       i915_gem_userptr_init__mmu_notifier+0x1fb/0x270 [i915]
       i915_gem_userptr_ioctl+0x222/0x2c0 [i915]
       drm_ioctl_kernel+0x69/0xb0
       drm_ioctl+0x2f9/0x3d0
       do_vfs_ioctl+0x94/0x670
       SyS_ioctl+0x41/0x70
       entry_SYSCALL_64_fastpath+0x1c/0xb1

other info that might help us debug this:

Chain exists of:
  cpu_hotplug_lock.rw_sem --> &mm->mmap_sem --> &dev_priv->mm_lock

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&dev_priv->mm_lock);
                               lock(&mm->mmap_sem);
                               lock(&dev_priv->mm_lock);
  lock(cpu_hotplug_lock.rw_sem);

 *** DEADLOCK ***

2 locks held by prime_mmap/1551:
 #0:  (&mm->mmap_sem){++++}, at: [<ffffffffa01a7b18>] i915_gem_userptr_init__mmu_notifier+0x138/0x270 [i915]
 #1:  (&dev_priv->mm_lock){+.+.}, at: [<ffffffffa01a7b2a>] i915_gem_userptr_init__mmu_notifier+0x14a/0x270 [i915]

stack backtrace:
CPU: 4 PID: 1551 Comm: prime_mmap Tainted: G     U          4.14.0-rc1-CI-CI_DRM_3118+ #1
Hardware name: Dell Inc. XPS 8300  /0Y2MRG, BIOS A06 10/17/2011
Call Trace:
 dump_stack+0x68/0x9f
 print_circular_bug+0x235/0x3c0
 ? lockdep_init_map_crosslock+0x20/0x20
 check_prev_add+0x430/0x840
 __lock_acquire+0x1420/0x15e0
 ? __lock_acquire+0x1420/0x15e0
 ? lockdep_init_map_crosslock+0x20/0x20
 lock_acquire+0xb0/0x200
 ? apply_workqueue_attrs+0x17/0x50
 cpus_read_lock+0x3d/0xb0
 ? apply_workqueue_attrs+0x17/0x50
 apply_workqueue_attrs+0x17/0x50
 __alloc_workqueue_key+0x1d8/0x4d9
 ? __lockdep_init_map+0x57/0x1c0
 i915_gem_userptr_init__mmu_notifier+0x1fb/0x270 [i915]
 i915_gem_userptr_ioctl+0x222/0x2c0 [i915]
 ? i915_gem_userptr_release+0x140/0x140 [i915]
 drm_ioctl_kernel+0x69/0xb0
 drm_ioctl+0x2f9/0x3d0
 ? i915_gem_userptr_release+0x140/0x140 [i915]
 ? __do_page_fault+0x2a4/0x570
 do_vfs_ioctl+0x94/0x670
 ? entry_SYSCALL_64_fastpath+0x5/0xb1
 ? __this_cpu_preempt_check+0x13/0x20
 ? trace_hardirqs_on_caller+0xe3/0x1b0
 SyS_ioctl+0x41/0x70
 entry_SYSCALL_64_fastpath+0x1c/0xb1
RIP: 0033:0x7fbb83c39587
RSP: 002b:00007fff188dc228 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: ffffffff81492963 RCX: 00007fbb83c39587
RDX: 00007fff188dc260 RSI: 00000000c0186473 RDI: 0000000000000003
RBP: ffffc90001487f88 R08: 0000000000000000 R09: 00007fff188dc2ac
R10: 00007fbb83efcb58 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000003 R14: 00000000c0186473 R15: 00007fff188dc2ac
 ? __this_cpu_preempt_check+0x13/0x20

Note that this also has the minor benefit of slightly reducing the
critical section where we hold mmap_sem.

v2: Set ret correctly when we raced with another thread.

v3: Use Chris' diff. Attach the right lockdep splat.

v4: Repaint in Tvrtko's colors (aka don't report ENOMEM if we race and
some other thread managed to not also get an ENOMEM and successfully
install the mmu notifier. Note that the kernel guarantees that small
allocations succeed, so this never actually happens).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sasha Levin <alexander.levin@verizon.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Cc: Tejun Heo <tj@kernel.org>
References: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_3180/shard-hsw3/igt@prime_mmap@test_userptr.html
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102939
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009164401.16035-1-daniel.vetter@ffwll.ch

drm/i915/bios: don't pass bdb to parsers that don't parse VBT directly

Hint that you're not supposed to look at VBT in these functions.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b82c326be8c796a70bdc2bd1c479bbb6159f5cb0.1506586821.git.jani.nikula@intel.com

drm/i915/bios: parse SDVO device mapping from pre-parsed child devices

We parse and store the child devices in
parse_general_definitions(). There is no need to parse the VBT block
again for SDVO device mapping. Do the same as we do in
parse_ddi_ports().

We no longer have access to child device size at this stage, but we also
don't need to worry about reading past the child device anymore. Instead
of a child device size check, do a mild optimization by limiting the
parsing to gens 3 through 7.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c918d4173dd38a165295f1270cb16c2c01bd8cd1.1506586821.git.jani.nikula@intel.com

drm/i915/bios: merge parse_device_mapping() into parse_general_definitions()

They're both parsing the same block, and there's no need for them to be
split. The former also benefits from the range checks in the latter.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/64a292606ecbb0b8602e6c5523c5746573ec3944.1506586821.git.jani.nikula@intel.com

drm/i915/bios: cleanup comments and useless return

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4a95fb9d23d980830e3158d3c57258e6539965ce.1506586821.git.jani.nikula@intel.com

drm/i915/bios: remove an unnecessary temp variable

Prepare for merging parse_device_mapping() into
parse_general_definitions(). No functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f1c3621e2622f4debdfb4a2f5c1959845754ac04.1506586821.git.jani.nikula@intel.com

drm/i915/bios: don't initialize fields based on vbt version

In theory, these might clobber information for older VBT versions.

We might have to store the BDB version for later parsing, but currently
all code accessing these fields will only use them on newer platforms
with new enough BDB versions.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0232d9cb258e8f83c4180cdb8aad1459a312ec2a.1506586821.git.jani.nikula@intel.com

drm/i915/bios: refactor parse general definitions

Early return on failures. Rename the variable for later merging with
parse_device_mappings().

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/785abb904a572752fec68d90d34efeb67774dc1f.1506586821.git.jani.nikula@intel.com

drm/i915/bios: parse DDI ports also for CHV for HDMI DDC pin and DP AUX channel

While technically CHV isn't DDI, we do look at the VBT based DDI port
info for HDMI DDC pin and DP AUX channel. (We call these "alternate",
but they're really just something that aren't platform defaults.)

In commit e4ab73a13291 ("drm/i915: Respect alternate_ddc_pin for all DDI
ports") Ville writes, "IIRC there may be CHV system that might actually
need this."

I'm not sure why there couldn't be even more platforms that need this,
but start conservative, and parse the info for CHV in addition to DDI.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100553
Reported-by: Marek Wilczewski <mw@3cte.pl>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d0815082cb98487618429b62414854137049b888.1506586821.git.jani.nikula@intel.com

drm/i915: avoid division by zero on cnl_calc_wrpll_link

If for some unexpected reason the registers all read zero it's better
to WARN and return instead of dividing by zero and completely freezing
the machine.

I don't expect this to happen in the wild with the current code, but I
accidentally triggered the division by zero while doing some debugging
in an unusual environment.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005213842.11423-2-paulo.r.zanoni@intel.com

drm/i915: add the BXT and CNL DPLL registers to pipe_config_compare

Looks like we were missing them.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170922205343.16006-2-paulo.r.zanoni@intel.com

drm/i915: s/sg_mask/sg_page_sizes/

It's a little unclear what the sg_mask actually is, so prefer the more
meaningful name of sg_page_sizes.

Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009110024.29114-1-matthew.auld@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>