Jason Yan [Thu, 9 Apr 2020 08:53:39 +0000 (16:53 +0800)]
staging: vc04_services: remove set but not used 'local_entity_uc'
Fix the following gcc warning:
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:2356:16:
warning: variable ‘local_entity_uc’ set but not used
[-Wunused-but-set-variable]
int local_uc, local_entity_uc;
^~~~~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200409085339.47255-1-yanaijie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Thu, 9 Apr 2020 08:08:02 +0000 (10:08 +0200)]
staging: rtl8188eu: remove 5 GHz if test
Cleanup a line over 80 characters by removing an if test that is valid
only for 5 GHz. According to the TODO 5 GHz code should be removed.
- find and remove remaining code valid only for 5 GHz. Most of the obvious
ones have been removed, but things like channel > 14 still exist.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200409080802.16645-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Mon, 13 Apr 2020 05:59:42 +0000 (07:59 +0200)]
staging: mt7621-pci: fix PCIe interrupt mapping
MT7621 has three assigned interrupts for the pcie. This
interrupts should properly being mapped taking into account
which devices are finally connected in which bus according
to link status. So the irq mappings should be as follows
according to link status (three bits indicating which devices
are link up):
* For PCIe Bus 1 slot 0:
- status = 0x2 || status = 0x6 => IRQ = pcie1_irq (24).
- status = 0x4 => IRQ = pcie2_irq (25).
- default => IRQ = pcie0_irq (23).
* For PCIe Bus 2 slot 0:
- status = 0x5 || status = 0x6 => IRQ = pcie2_irq (25).
- default => IRQ = pcie1_irq (24).
* For PCIe Bus 2 slot 1:
- status = 0x5 || status = 0x6 => IRQ = pcie2_irq (25).
- default => IRQ = pcie1_irq (24).
* For PCIe Bus 3 any slot:
- default => IRQ = pcie2_irq (25).
Because of this, the function 'of_irq_parse_and_map_pci' cannot
be used and we need to change device tree information from using
the 'interrupt-map' and 'interrupt-map-mask' properties into an
'interrupts' property to be able to get irq information from the
ports using the 'platform_get_irq' and storing an 'irq-map' into
the pcie driver data node to properly map correct irq using a
new 'mt7621_map_irq' function where this map will be read and the
correct irq returned.
Fixes:
46d093124df4 ("staging: mt7621-pci: improve interrupt mapping")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20200413055942.2714-1-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 10 Apr 2020 09:18:36 +0000 (11:18 +0200)]
staging: mt7621-pci-phy: dt: bindings: remove bindings txt file
Yaml file for bindings has been properly added. Hence, remove
the old txt file.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20200410091836.13068-3-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 10 Apr 2020 09:18:35 +0000 (11:18 +0200)]
staging: mt7621-pci-phy: dt: bindings: add mediatek, mt7621-pci-phy.yaml
Add bindings to describe Mediatek MT7621 PCIe PHY.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20200410091836.13068-2-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Thu, 9 Apr 2020 11:16:52 +0000 (13:16 +0200)]
staging: mt7621-pci: properly power off dual-ported pcie phy
Pcie phy for pcie0 and pcie1 is shared using a dual ported
one. Current code was assuming that if nothing is connected
in pcie0 it won't be also nothing connected in pcie1. This
assumtion is wrong for some devices such us 'Mikrotik rbm33g'
and 'ZyXEL LTE3301-PLUS' where only connecting a card to the
second bus on the phy is possible. For such devices kernel
hangs in the same point because of the wrong poweroff of the
phy getting the following trace:
mt7621-pci-phy
1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1)
mt7621-pci-phy
1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0)
mt7621-pci-phy
1e149000.pcie-phy: Xtal is 40MHz
mt7621-pci-phy
1e14a000.pcie-phy: Xtal is 40MHz
mt7621-pci
1e140000.pcie: pcie0 no card, disable it (RST & CLK)
[hangs]
The wrong assumption is located in the 'mt7621_pcie_init_ports'
function where we are just making a power off of the phy for
slots 0 and 2 if nothing is connected in them. Hence, only
poweroff the phy if nothing is connected in both slot 0 and
slot 1 avoiding the kernel to hang.
Fixes:
5737cfe87a9c ("staging: mt7621-pci: avoid to poweroff the phy for slot one")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20200409111652.30964-1-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Fri, 10 Apr 2020 13:32:39 +0000 (15:32 +0200)]
staging: wfx: drop useless update of macaddr
Mac address is set in wfx_add_interface() and removed in
wfx_remove_interface().
Currently, there is also an additional update of mac address in
wfx_do_unjoin(). It has no rationale. Mac address is already present
and nothing has changed it. Therefore, we can drop it.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200410133239.438347-20-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Fri, 10 Apr 2020 13:32:38 +0000 (15:32 +0200)]
staging: wfx: drop unused attribute 'beacon_int'
The field beacon_int is never read. Drop it.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200410133239.438347-19-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Fri, 10 Apr 2020 13:32:37 +0000 (15:32 +0200)]
staging: wfx: check value of beacon_int
Firmware dislike when beacon_int value is 0. This patch add some
warnings in case it would happen.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200410133239.438347-18-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Fri, 10 Apr 2020 13:32:36 +0000 (15:32 +0200)]
staging: wfx: re-enable BA after reset
Firmware does not support Block Acks when multiple vif are running.
Thus, wfx_add_interface() and wfx_remove_interface() enable and disable
Block Acks as necessary.
Block Ack policy is also reset after hif_reset(). Driver have to
re-enable it after each call to hif_reset().
This patch reflects this behavior.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200410133239.438347-17-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Fri, 10 Apr 2020 13:32:35 +0000 (15:32 +0200)]
staging: wfx: introduce wfx_join_ibss() and wfx_leave_ibss()
Currently, IBSS networks are started by the mean of
wfx_bss_info_changed(). It easier to use use callbacks provided by
mac80211.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200410133239.438347-16-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Fri, 10 Apr 2020 13:32:34 +0000 (15:32 +0200)]
staging: wfx: allow to join IBSS networks
Current code does not permit to join an already existing IBSS network.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200410133239.438347-15-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Fri, 10 Apr 2020 13:32:33 +0000 (15:32 +0200)]
staging: wfx: avoid duplicate updating of beacon template
When ERP changes, mac80211 call wfx_bss_info_changed() with
BSS_CHANGED_ERP_* and with BSS_CHANGED_BEACON.
The driver already update beacon template because of
BSS_CHANGED_BEACON. It is not necessary to also update beacon template
because of BSS_CHANGED_ERP_*.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200410133239.438347-14-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Fri, 10 Apr 2020 13:32:32 +0000 (15:32 +0200)]
staging: wfx: remove unnecessary conditions in wfx_bss_info_changed()
wfx_bss_info_changed() update ERP and CQM related stuff. Thus, it check
the flags BSS_CHANGED_ERP_* and BSS_CHANGED_CQM.
It also update ERP and CQM on join and leave by checking the flag
BSS_CHANGED_ASSOC. This check is useless. Mac80211 already do that job
and set necessary flags as expected.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200410133239.438347-13-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Fri, 10 Apr 2020 13:32:31 +0000 (15:32 +0200)]
staging: wfx: request to send beacons in IBSS mode
Currently, firmware take in charge of start/stop sending beacons while
in IBSS mode. However, this behavior may change in the further releases.
Currently, asking to firmware to send beacon while in IBSS mode return
an error but is harmless.
Therefore, send this request unconditionally.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200410133239.438347-12-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Fri, 10 Apr 2020 13:32:30 +0000 (15:32 +0200)]
staging: wfx: drop unnecessary condition checks in wfx_upload_ap_templates()
In former code, wfx_upload_ap_templates() was called in more cases
than necessary. Therefore, it tried to not update the frame templates
if it was not necessary.
Now, wfx_upload_ap_templates() is called only if mac80211 asked to
update the templates. In add, it does not hurt to upload template if
they are not used. So, remove unnecessary conditions at beginning of
wfx_upload_ap_templates()
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200410133239.438347-11-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Fri, 10 Apr 2020 13:32:29 +0000 (15:32 +0200)]
staging: wfx: disabling keep alive during unjoin is useless
After a call to hif_reset(), the parameters associated with BSS are
reset. So, it useless to explicitly reset the keep alive period.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200410133239.438347-10-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Fri, 10 Apr 2020 13:32:28 +0000 (15:32 +0200)]
staging: wfx: fix support for BSS_CHANGED_KEEP_ALIVE
Chip firmware is able to send periodic null frames to keep the
association with the AP.
The driver arbitrary set this period to 30sec. We prefer to rely on
BSS_CHANGED_KEEP_ALIVE that provide a true value.
Note that if BSS_CHANGED_KEEP_ALIVE is not received, we just disable
keep_alive feature. It is not very disturbing since AP will probably
ping the station before to disconnect it.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200410133239.438347-9-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Fri, 10 Apr 2020 13:32:27 +0000 (15:32 +0200)]
staging: wfx: remove useless call to wfx_tx_flush()
wfx_do_join() calls wfx_tx_lock_flush() ate beginning of the function.
Therefore, the subsequent call to wfx_tx_flush() is useless.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200410133239.438347-8-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Fri, 10 Apr 2020 13:32:26 +0000 (15:32 +0200)]
staging: wfx: change the way the station associate to an AP
Chipset need two steps to associate with an AP:
1. it start receiving beacon from the AP (done with wfx_do_join())
2. it sent the association request (done with wfx_join_finalize())
The join request (see hif_join()) contains basic rates, beacon interval
and bssid to connect, so we trig on these events for the first step.
The second step is obviously associated to the event BSS_CHANGED_ASSOC.
Note that conf_mutex is now easier to manage. It is held by
wfx_bss_info_changed() and inner functions does not need to lock it.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200410133239.438347-7-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Fri, 10 Apr 2020 13:32:25 +0000 (15:32 +0200)]
staging: wfx: set all parameters before starting AP
Current code start AP and then configure the different parameters. Since
all the configuration is sent quickly after AP started, it works.
However, it is not very nice. In add, last firmware releases start to
disallow incorrect settings.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200410133239.438347-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Fri, 10 Apr 2020 13:32:24 +0000 (15:32 +0200)]
staging: wfx: implement start_ap/stop_ap
Currently, wfx_bss_info_changed() check interface status changes and
guess when the pattern match with an AP start and AP stop (through
wfx_update_beaconing()). It is far easier to rely on start_ap and
stop_ap callbacks provided by mac80211.
wfx_bss_info_changed() keeps only the responsibility of updating the
frame templates.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200410133239.438347-5-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Fri, 10 Apr 2020 13:32:23 +0000 (15:32 +0200)]
staging: wfx: call wfx_do_unjoin() synchronously
Currently, wfx_do_unjoin() are called by the mean of work queues.
However, the contexts from where they are called are not atomic. So
there is no reason to not call it synchronously.
This change will simplify the code. Notice two main changes:
- There no more reason to lock tx queue before to run
wfx_do_unjoin(). We can lock the tx queue directly from
wfx_do_unjoin().
- Most of the time, wfx_do_unjoin_work() was called with conf_mutex
held. This patch remove lock of conf_mutex in wfx_do_unjoin_work()
and ensure that conf_mutex is always held whatever the context.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200410133239.438347-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Fri, 10 Apr 2020 13:32:22 +0000 (15:32 +0200)]
staging: wfx: reduce hold duration of cfg80211_bss
Pointer to cfg80211_bss is held during all duration of wfx_do_join. But,
it is not necessary, We can release it far earlier.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200410133239.438347-3-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Fri, 10 Apr 2020 13:32:21 +0000 (15:32 +0200)]
staging: wfx: fix race between configure_filter and remove_interface
wfx_remove_interface() and wfx_configure_filter() can be run
concurrently. Therefore, this patch protect access to the list of
interfaces from wfx_configure_filter().
Notice that wfx_configure_filter() now lock "conf_lock" and "scan_lock".
Beside that, wfx_hw_scan_work() also access to the same locks. So we
have to lock them in same order to avoid any deadlock.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200410133239.438347-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Mon, 6 Apr 2020 11:17:56 +0000 (13:17 +0200)]
staging: wfx: send just necessary bytes
Size of hif_mib_template_frame must be sufficient to contains bytes
declared by frame_length and cannot exceed 700bytes.
Change the API to reflect that.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200406111756.154086-12-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Mon, 6 Apr 2020 11:17:55 +0000 (13:17 +0200)]
staging: wfx: make hif_ie_table_entry const
In wfx_update_filtering(), filter_ies is never modified. So, make it
constant.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200406111756.154086-11-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Mon, 6 Apr 2020 11:17:54 +0000 (13:17 +0200)]
staging: wfx: allow to connect an IBSS with an existing SSID
With current code, chip is not able to join an existing IBSS network.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200406111756.154086-10-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Mon, 6 Apr 2020 11:17:53 +0000 (13:17 +0200)]
staging: wfx: place hif_tx_mib functions into a .c file
Until now, all functions from hif_tx_mib.h are declared "static inline".
However, they are not time critical. So, it does not make so much sense.
We prefer to place them in a .c file as for other hif functions.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200406111756.154086-9-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Mon, 6 Apr 2020 11:17:52 +0000 (13:17 +0200)]
staging: wfx: align members declarations in hif API
Hardware API headers were not uniformly aligned.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200406111756.154086-8-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Mon, 6 Apr 2020 11:17:51 +0000 (13:17 +0200)]
staging: wfx: fix endianness of hif API
The chip expects little endian in all structs it sends/receives. This
patch fixes the hif API to reflect this fact. Sparse should now report
meaningful errors.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200406111756.154086-7-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Mon, 6 Apr 2020 11:17:50 +0000 (13:17 +0200)]
staging: wfx: remove useless defines
Several values defined in hif API are only here to define length of some
arrays. In most cases, they do not provide any extra information about
the size of the array (ie. "API_FIRMWARE_LABEL_SIZE" is only used to
define the size of member "firmware_label").
Remove these useless definitions.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200406111756.154086-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Mon, 6 Apr 2020 11:17:49 +0000 (13:17 +0200)]
staging: wfx: remove unused definitions from the hif API
Until now, hif API was directly imported from firmware sources.
However, it does not make sense to keep ton of unused structures in
the driver. Moreover, the hif API is now stable enough to be keep in
sync by importing delta from firmware.
So, drop unused definitions from the hif API.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200406111756.154086-5-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Mon, 6 Apr 2020 11:17:48 +0000 (13:17 +0200)]
staging: wfx: relocate TX_RETRY_POLICY_MAX and TX_RETRY_POLICY_INVALID to hif API
The definitions TX_RETRY_POLICY_MAX and TX_RETRY_POLICY_INVALID are
imposed by the hardware. Therefore, they should be located in the
hardware interface API.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200406111756.154086-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Mon, 6 Apr 2020 11:17:47 +0000 (13:17 +0200)]
staging: wfx: relocate LINK_ID_NO_ASSOC and MAX_STA_IN_AP_MODE to hif API
The definitions LINK_ID_NO_ASSOC and MAX_STA_IN_AP_MODE are imposed by
the hardware. Therefore, they should be located in the hardware
interface API.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200406111756.154086-3-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Mon, 6 Apr 2020 11:17:46 +0000 (13:17 +0200)]
staging: wfx: drop unused WFX_LINK_ID_GC_TIMEOUT
The definition WFX_LINK_ID_GC_TIMEOUT is not used anymore since
commit
d6aeba575f27 ("staging: wfx: simplify the link-id allocation")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200406111756.154086-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
R Veera Kumar [Mon, 6 Apr 2020 15:41:26 +0000 (21:11 +0530)]
staging: rtl8723bs: hal: Correct misspelled symbolic name
Correct misspelled symbolic name.
Misspelling found using checkpatch.pl.
Signed-off-by: R Veera Kumar <vkor@vkten.in>
Link: https://lore.kernel.org/r/b893adc31b71722df63d0756f0d360e27f896e51.1586187304.git.vkor@vkten.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
R Veera Kumar [Mon, 6 Apr 2020 15:41:25 +0000 (21:11 +0530)]
staging: rtl8723bs: hal: Correct misspelt enum name
Correct misspelt enum name.
Misspelling found using checkpatch.pl.
Signed-off-by: R Veera Kumar <vkor@vkten.in>
Link: https://lore.kernel.org/r/d091fa95d537f613c24e55a2dee638d4493534b5.1586187304.git.vkor@vkten.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
R Veera Kumar [Mon, 6 Apr 2020 15:41:24 +0000 (21:11 +0530)]
staging: rtl8723bs: Correct misspelt symbolic names
Correct misspelt symbolic names.
Misspelling found using checkpatch.pl.
Signed-off-by: R Veera Kumar <vkor@vkten.in>
Link: https://lore.kernel.org/r/abe807c11a5fda479ed6079a11d528989fe7b63e.1586187304.git.vkor@vkten.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:04:05 +0000 (13:04 +0200)]
staging: wfx: remove hack about tx_rate policies
Current code contains a weird hack to avoid switch from 54Mbps CTS to
1Mbps. However, we have not been able to reproduce the problem and
hardware team don't know any defect of this kind. So, it seems this hack
is no more necessary.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-33-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:04:04 +0000 (13:04 +0200)]
staging: wfx: fix case where AP stop with CAB traffic pending
When driver has Content After DTIM Beacon (CAB) in queue, it wait for an
indication from the firmware. However, when we stop to send beacons,
this indication may never happen.
Solve this issue by simply simulate this indication. Firmware will send
data that probably nobody will heard.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-32-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:04:03 +0000 (13:04 +0200)]
staging: wfx: fix potential deadlock in wfx_tx_flush()
wfx_tx_flush() wait there are no more frame in device buffer. However,
this event may never happens since wfx_tx_flush() don't forbid to
enqueue new frames.
Note that wfx_tx_flush() should only ensure that all frames currently in
hardware queues are sent. So the current code is more restrictive that
it should.
Note that wfx_tx_flush() release the lock before to return while
wfx_tx_lock_flush() keep the lock.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-31-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:04:02 +0000 (13:04 +0200)]
staging: wfx: wfx_flush() did not ensure that frames are processed
wfx_flush() exited once all frames are retrieved from the device.
However, it did not ensure they were processed by driver before to
return. Therefore, some frame may be processed after the interface has
disappear.
Change the place we signal that the queue is empty to fix that.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-30-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:04:01 +0000 (13:04 +0200)]
staging: wfx: repair wfx_flush()
Until now, wfx_flush() flushed queue for while device instead of only
the queue of the intended vif. It sometime failed with a timeout, but
this error was not reported.
Moreover, if the device was frozen, wfx_flush didn't do anything and it
results a potential warning (and maybe a resource leak) when the frozen
device was unregistered.
We can also notice that wfx_tx_queues_wait_empty_vif() did only exist to
work around the broken feature of wfx_flush().
This patch repair wfx_flush() and therefore drop
wfx_tx_queues_wait_empty_vif().
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-29-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:04:00 +0000 (13:04 +0200)]
staging: wfx: relocate wfx_skb_dtor() prior its callers
In a next commit, we would like to mark wfx_skb_dtor as static and stop
to declare it in data_tx.h.
Relocate wfx_skb_dtor() prior its callers to avoid compile error.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-28-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:59 +0000 (13:03 +0200)]
staging: wfx: improve interface between data_tx.c and queue.c
Currently, wfx_pending_remove() (from queue.c) call wfx_skb_dtor()
(from data_tx.c) that forward the tx status to mac80211.
Moreover, there no purpose to retrieve a frame from the pending queue
without dequeuing it. So, the main purpose of wfx_pending_remove() is to
forward the tx status to mac80211.
Let's make the architecture cleaner:
- merge wfx_pending_remove() into wfx_pending_get()
- call wfx_skb_dtor() from data_tx.c
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-27-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:58 +0000 (13:03 +0200)]
staging: wfx: simplify usage of wfx_tx_queues_put()
The queue used for wfx_tx_queue_put() can be deducted from the content
of the skb. So drop this parameter from call to wfx_tx_queues_put().
In add, this change uniformizes usage of functions wfx_tx_queues_*.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-26-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:57 +0000 (13:03 +0200)]
staging: wfx: drop struct wfx_queue_stats
There is no reason to keep the intermediate struct wfx_queue_stats.
Relocate its members to struct wfx_dev.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-25-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:56 +0000 (13:03 +0200)]
staging: wfx: drop now useless field edca_params
Since we do not rely in QoS parameters to choose which frame to send, it
is no more necessary to keep a copy of EDCA parameters.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-24-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:55 +0000 (13:03 +0200)]
staging: wfx: change the way to choose frame to send
The current code computes itself the QoS policy to choose which frame
should be sent. However, firmware already do that job. Firmware would
prefer to have packets in every queues and be able to choose itself
which queue to use.
So, this patch sort the queues from the emptiest to the fulliest (thanks
to the pending frames counter introduced a few commits earlier). It send
frame to the least full queue.
However, we continue to be careful with frames that have to be sent
after a dtim ("cab": Content After (DTIM) Beacon).
So, this patch splits AC queues in two skb_queues: one for normal frames
and another for cab frames. It cares to send frames from CAB skb_queue
if appropriate.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-23-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:54 +0000 (13:03 +0200)]
staging: wfx: introduce a counter of pending frames
This counter will be useful to know which queue is least full in a
further patch.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-22-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:53 +0000 (13:03 +0200)]
staging: wfx: replace wfx_tx_queues_get_after_dtim() by wfx_tx_queues_has_cab()
It is not necessary to return a skb. Just getting the information if
there is traffic to be sent after DTIM is sufficient.
In add, the acronym "cab" (Content After (DTIM) Beacon) is used in
mac80211 to designate this kind of traffic.
So, make wfx_tx_queues_get_after_dtim() return a boolean and rename
accordingly.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-21-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:52 +0000 (13:03 +0200)]
staging: wfx: rename wfx_tx_get_raw_link_id()
Since concept of "raw_link_id" does not exist anymore, rename
wfx_tx_get_raw_link_id() in wfx_tx_get_link_id().
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-20-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:51 +0000 (13:03 +0200)]
staging: wfx: drop unused raw_link_id field
raw_link_id can be retrieved by wfx_tx_get_raw_link_id(). So, it is not
necessary to keep it in struct wfx_tx_priv.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-19-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:50 +0000 (13:03 +0200)]
staging: wfx: drop unused link_id field
It is not used anymore.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-18-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:49 +0000 (13:03 +0200)]
staging: wfx: do not rely anymore on link_id to choose packet in queue
link_id was expected to contain identifier of a station. It was also
used to mark frames that has to sent after dtim. We do not use the
further purpose. For the last purpose, we can directly check the flag
value in tx_info.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-17-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:48 +0000 (13:03 +0200)]
staging: wfx: drop useless link_map_cache
Driver does not use link_map_cache anymore. So we can drop it. In add,
we do not have to keep this counter in sync with skb_queue item, so we
can drop explicit spin_locks.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-16-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:47 +0000 (13:03 +0200)]
staging: wfx: do not use link_map_cache to track CAB
Since we do not track power save status of the stations anymore,
link_map_cache is now only used to track "Content After (DTIM) Beacon".
We prefer to rely on flags from tx_info. So we will be able to drop
link_map_cache.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-15-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:46 +0000 (13:03 +0200)]
staging: wfx: drop argument tx_allowed_mask since it is constant now
Following the remove of asleep_mask, the tx_allowed_mask argument passed
to various functions is now always the same. Drop this argument and
simplify the code.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-14-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:45 +0000 (13:03 +0200)]
staging: wfx: drop useless sta_asleep_mask
Currently, the driver tracks power save state of the stations with the
variable sta_asleep_mask. Then, it takes care to not sent data to asleep
stations.
However, this work is already done by mac80211. Normally, there are no
frames for asleep stations in our queues. So, driver do not have to
filter frames in its queues (apart the frames marked "AFTER_DTIM").
Notice that there is a risk of race between state of the station and
data send to the firmware. However, this risk is limited since the
number of frame in queues are small. In add, this race also exists with
the current code. Anyway, the firmware is able to detect the problem and
driver will receive a 'REQUEUE' status (translated in
TX_STAT_TX_FILTERED for mac80211).
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-13-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:44 +0000 (13:03 +0200)]
staging: wfx: simplify wfx_tx_queue_mask_get()
It is far simpler to return a pointer instead of an error. Thus, it is
no more necessary to pass a pointer reference as argument.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-12-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:43 +0000 (13:03 +0200)]
staging: wfx: drop unused argument in wfx_get_prio_queue()
The argument "total" is not used anymore since commit
a3c529a83589
("staging: wfx: simplify handling of IEEE80211_TX_CTL_SEND_AFTER_DTIM").
Fixes:
a3c529a83589 ("staging: wfx: simplify handling of IEEE80211_TX_CTL_SEND_AFTER_DTIM")
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-11-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:42 +0000 (13:03 +0200)]
staging: wfx: simplify wfx_tx_queues_empty()
Thanks to skb_queue_empty_lockless(), it is not necessary to acquire the
spin_lock before to check if the queue is empty.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-10-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:41 +0000 (13:03 +0200)]
staging: wfx: simplify hif_handle_tx_data()
The last argument of hif_handle_tx_data() was now unused. In add,
hif_handle_tx_data() has nothing to do with HIF layer and should be
renamed. Finally, it not convenient to pass a wfx_vif as parameter. It
is easier to let hif_handle_tx_data() find the interface itself.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-9-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:40 +0000 (13:03 +0200)]
staging: wfx: avoid useless wake_up
__wfx_flush() wait for all queues to be empty. In current code,
wait_link_id_empty is wake up each time there is no more data for a
station. We can simplify the processing and avoid some wake-up by
raising this event only when the queue is empty.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-8-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:39 +0000 (13:03 +0200)]
staging: wfx: drop useless queue_id field
The field queue_id is no more used.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-7-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:38 +0000 (13:03 +0200)]
staging: wfx: uniformize queue_id retrieval
tx_info->hw_queue contains "vif.hw_queue[skb_get_queue_mapping(skb)]".
For now, it is equivalent of "skb_get_queue_mapping(skb)". However, it
is not the same semantic. In wfx_tx_inner(), we want to get the mac80211
queue index, not the hardware queue index.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:37 +0000 (13:03 +0200)]
staging: wfx: remove "burst" mechanism
In the old days, the driver tried to reorder frames in order to send
frames from the same queue grouped to the firmware. However, the
firmware is able to do the job internally for a long time. There is no
reasons to keep this mechanism.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-5-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:36 +0000 (13:03 +0200)]
staging: wfx: take advantage of ieee80211_{stop/start}_queues
Instead of maintaining stop status for each queue, we can just maintain
a global status for all queues.
In add, wfx_tx_queues_{lock/unlock} are only used when no more
tx_policies are available. Therefore, the counter of recursive locks
("tx_locked_cnt") is useless.
So, wfx_tx_queues_{lock/unlock} can be replaced by
ieee80211_{stop/start}_queues.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:35 +0000 (13:03 +0200)]
staging: wfx: do not stop mac80211 queueing during tx_policy upload
When a new tx_policy has to be uploaded, it is necessary to avoid any
race between the frame and the policy. So, the driver stops the tx queue
during tx_policy upload. However, it is not necessary to stop mac80211
queuing.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-3-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Pouiller [Wed, 1 Apr 2020 11:03:34 +0000 (13:03 +0200)]
staging: wfx: add sanity checks to hif_join()
Add a few check on start of hif_join().
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200401110405.80282-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Soumyajit Deb [Mon, 6 Apr 2020 11:17:06 +0000 (16:47 +0530)]
staging: rtl8188eu: Line over 80 characters
Break various lines into multiple lines to respect 80 character width
limit.
Reported by checkpatch.pl
Signed-off-by: Soumyajit Deb <debsoumyajit100@gmail.com>
Link: https://lore.kernel.org/r/20200406111706.25957-4-debsoumyajit100@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Soumyajit Deb [Mon, 6 Apr 2020 11:17:05 +0000 (16:47 +0530)]
staging: rtl8188eu: Remove unnecessary extra parentheses
Remove unnecessary extra parentheses to improve code readability.
Signed-off-by: Soumyajit Deb <debsoumyajit100@gmail.com>
Link: https://lore.kernel.org/r/20200406111706.25957-3-debsoumyajit100@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Soumyajit Deb [Mon, 6 Apr 2020 11:17:04 +0000 (16:47 +0530)]
staging: rtl8188eu: Properly structure the multiline comment
Add "*" at the start of each line of the multiline comment to improve
code readability and to adhere to the uniform Kernel coding style.
Reported by checkpatch.pl
Signed-off-by: Soumyajit Deb <debsoumyajit100@gmail.com>
Link: https://lore.kernel.org/r/20200406111706.25957-2-debsoumyajit100@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 5 Apr 2020 11:22:30 +0000 (13:22 +0200)]
staging: rtl8188eu: remove unnecessary variable
The variable 'bStopBlinking' is used in if tests immediately after its
value is set. Use the conditions for setting 'bStopBlinking' diretly in
the subsequent if tests and remove the variable. Slightly reduces
object file size by 16 bytes (gcc 9.2.1 x86_64).
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200405112230.31975-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 5 Apr 2020 11:22:29 +0000 (13:22 +0200)]
staging: rtl8188eu: remove unnecessary asignment
Remove unnecessary asignment in SwLedBlink1(). The code path with the
asignment 'pLed->BlinkTimes = 0' is only executed when
'pLed->BlinkTimes' is already zero and the value is not changed between
the test 'if (pLed->BlinkTimes == 0)' and the asignment.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200405112230.31975-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
R Veera Kumar [Sun, 5 Apr 2020 17:57:22 +0000 (23:27 +0530)]
staging: unisys: visorhba: Correct a typo in comment
Correct a typo in comment.
Misspelling found using checkpatch.pl.
Signed-off-by: R Veera Kumar <vkor@vkten.in>
Link: https://lore.kernel.org/r/20200405175722.8188-1-vkor@vkten.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
R Veera Kumar [Sun, 5 Apr 2020 17:42:47 +0000 (23:12 +0530)]
staging: rtl8192e: rtl8192e: Correct misspelt variable name
Correct misspelt variable name.
Misspelling found using checkpatch.pl.
Signed-off-by: R Veera Kumar <vkor@vkten.in>
Link: https://lore.kernel.org/r/20200405174247.7868-1-vkor@vkten.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Sun, 5 Apr 2020 13:06:19 +0000 (14:06 +0100)]
staging: gdm724x: remove redundant assignment to pointer 'w'
The pointer 'w' is being initialized with a value that is never read
and it is being updated later with a new value. The initialization
is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200405130619.377043-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Briana Oursler [Fri, 3 Apr 2020 17:18:05 +0000 (10:18 -0700)]
Staging: vt6655: Replace camel case variable names.
Replace camel case variable names with snake case in baseband.h and its
dependencies.
Signed-off-by: Briana Oursler <briana.oursler@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/20200403171805.466600-1-briana.oursler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Sun, 29 Mar 2020 12:45:01 +0000 (14:45 +0200)]
staging: bcm2835-camera: reduce indentation in ctrl_set_image_effect
We can reduce the indentation in the loop by using continue in case the
effect doesn't match.
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1585485901-10172-10-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Sun, 29 Mar 2020 12:45:00 +0000 (14:45 +0200)]
staging: bcm2835-camera: reduce multiline statements
There are a lot of multiline statements which can be reduced.
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1585485901-10172-9-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Sun, 29 Mar 2020 12:44:59 +0000 (14:44 +0200)]
staging: bcm2835-camera: return early in mmal_setup_components
We can reduce the indentation in mmal_setup_components further by
returning early in error case.
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1585485901-10172-8-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Sun, 29 Mar 2020 12:44:58 +0000 (14:44 +0200)]
staging: bcm2835-camera: Move video component setup in its own function
The function mmal_setup_components has to many indention levels. So move
the setup code for video component in its own function.
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1585485901-10172-7-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Sun, 29 Mar 2020 12:44:57 +0000 (14:44 +0200)]
staging: bcm2835-camera: Move encode component setup in its own function
The function mmal_setup_components has to many indention levels. So move
the setup code for encode component in its own function.
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1585485901-10172-6-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Sun, 29 Mar 2020 12:44:56 +0000 (14:44 +0200)]
staging: bcm2835-camera: Simplify set_framerate_params
This simplifies set_framerate_params and avoids the multiple assignment
in one line by moving the fps_high handling out of the if statement.
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1585485901-10172-5-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Sun, 29 Mar 2020 12:44:55 +0000 (14:44 +0200)]
staging: bcm2835-camera: Make struct indentation consistent
The indentation of struct members wasn't consistent over the whole driver.
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1585485901-10172-4-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Sun, 29 Mar 2020 12:44:54 +0000 (14:44 +0200)]
staging: bcm2835-camera: Activate V4L2_EXPOSURE_METERING_MATRIX handling
I don't see any reason to keep this TODO, so activate the
V4L2_EXPOSURE_METERING_MATRIX handling.
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1585485901-10172-3-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Sun, 29 Mar 2020 12:44:53 +0000 (14:44 +0200)]
staging: bcm2835-camera: Drop PREVIEW_LAYER
This define is used only once. So drop the define and init the layer
directly.
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1585485901-10172-2-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John B. Wyatt IV [Thu, 2 Apr 2020 02:33:10 +0000 (19:33 -0700)]
staging: fsl-dpaa2: ethsw: Fix parenthesis alignment
Fix 2 parenthesis alignment issues.
Reported by checkpatch.
Signed-off-by: John B. Wyatt IV <jbwyatt4@gmail.com>
Link: https://lore.kernel.org/r/20200402023310.816245-1-jbwyatt4@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John B. Wyatt IV [Thu, 2 Apr 2020 01:50:08 +0000 (18:50 -0700)]
staging: axis-fifo: Fix parenthesis alignment
Fix 2 parenthesis alignment issues.
Reported by checkpatch.
Signed-off-by: John B. Wyatt IV <jbwyatt4@gmail.com>
Link: https://lore.kernel.org/r/20200402015008.728612-1-jbwyatt4@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aiman Najjar [Sun, 29 Mar 2020 18:57:47 +0000 (14:57 -0400)]
staging: rtl8712: fix multiline derefernce warnings
This patch fixes remaining checkpatch warnings
in rtl871x_xmit.c:
WARNING: Avoid multiple line dereference - prefer 'psecuritypriv->PrivacyKeyIndex'
636: FILE: drivers/staging//rtl8712/rtl871x_xmit.c:636:
+ (u8)psecuritypriv->
+ PrivacyKeyIndex);
WARNING: Avoid multiple line dereference - prefer 'psecuritypriv->XGrpKeyid'
643: FILE: drivers/staging//rtl8712/rtl871x_xmit.c:643:
+ (u8)psecuritypriv->
+ XGrpKeyid);
WARNING: Avoid multiple line dereference - prefer 'psecuritypriv->XGrpKeyid'
652: FILE: drivers/staging//rtl8712/rtl871x_xmit.c:652:
+ (u8)psecuritypriv->
+ XGrpKeyid);
Signed-off-by: Aiman Najjar <aiman.najjar@hurranet.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/98805a72b92e9bbf933e05b827d27944663b7bc1.1585508171.git.aiman.najjar@hurranet.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aiman Najjar [Sun, 29 Mar 2020 18:57:46 +0000 (14:57 -0400)]
staging: rtl8712: code improvements to make_wlanhdr
1. Refactor make_wlanhdr to improve code style.
2. Use ether_addr_copy instead of memcpy to copy addresses.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Aiman Najjar <aiman.najjar@hurranet.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/275773a0379e4a03839cd832d2ed952fd7bfee48.1585508171.git.aiman.najjar@hurranet.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aiman Najjar [Sun, 29 Mar 2020 18:57:45 +0000 (14:57 -0400)]
staging: rtl8712: fix checkpatch warnings
This patch fixes multiline dereference warnings in
rtl871x_xmit.c:
WARNING: Avoid multiple line dereference - prefer 'psecuritypriv->XGrptxmickey'
379: FILE: drivers/staging//rtl8712/rtl871x_xmit.c:379:
+ psecuritypriv->
+ XGrptxmickey[psecuritypriv->
WARNING: Avoid multiple line dereference - prefer 'psecuritypriv->XGrpKeyid'
380: FILE: drivers/staging//rtl8712/rtl871x_xmit.c:380:
+ XGrptxmickey[psecuritypriv->
+ XGrpKeyid].skey);
Signed-off-by: Aiman Najjar <aiman.najjar@hurranet.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/ddd296c34c5b0206dfe5cf2e6cbe40e0a118c257.1585508171.git.aiman.najjar@hurranet.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aiman Najjar [Sun, 29 Mar 2020 18:57:44 +0000 (14:57 -0400)]
staging: rtl8712: fix long-line checkpatch warning
This patch fixes the following warning in rtl871x_xmit.c:
WARNING: line over 80 characters
130: FILE: drivers/staging//rtl8712/rtl871x_xmit.c:130:
+ pxmitbuf->pallocated_buf = kmalloc(MAX_XMITBUF_SZ + XMITBUF_ALIGN_SZ,
Signed-off-by: Aiman Najjar <aiman.najjar@hurranet.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/de477e0d8f352c1d6cd75d64d84ac6f9017db254.1585508171.git.aiman.najjar@hurranet.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aiman Najjar [Sun, 29 Mar 2020 18:57:43 +0000 (14:57 -0400)]
staging: rtl8712: fix checkpatch long-line warning
This patch fixes these two long-line checkpatch warnings
in rtl871x_xmit.c:
WARNING: line over 80 characters
\#74: FILE: drivers/staging//rtl8712/rtl871x_xmit.c:74:
+ * Please allocate memory with the sz = (struct xmit_frame) * NR_XMITFRAME,
WARNING: line over 80 characters
\#79: FILE: drivers/staging//rtl8712/rtl871x_xmit.c:79:
+ kmalloc(NR_XMITFRAME * sizeof(struct xmit_frame) + 4, GFP_ATOMIC);
Signed-off-by: Aiman Najjar <aiman.najjar@hurranet.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/acd523d0d24cc81fae9eb933a066d87815587cee.1585508171.git.aiman.najjar@hurranet.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gokce Kuler [Sat, 28 Mar 2020 20:15:13 +0000 (23:15 +0300)]
staging: sm750fb: line over 80 characters
Convert a single line comment to a multiline comment to respect the 80
character rule.Problem found using checkpatch.
Signed-off-by: Gokce Kuler <gokcekuler@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/20200328201513.GA16863@siyah2
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John B. Wyatt IV [Sun, 29 Mar 2020 08:00:31 +0000 (01:00 -0700)]
staging: comedi: Fix line ending with a (
Fix style issue with declaration by adopting the same style as the
function defintion in drivers/staging/comedi/comedi_buf.c.
Issue reported by checkpatch.
Signed-off-by: John B. Wyatt IV <jbwyatt4@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/20200329080031.511959-1-jbwyatt4@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 29 Mar 2020 10:04:50 +0000 (12:04 +0200)]
staging: rtl8188eu: refactor Efuse_GetCurrentSize()
Refactor while loop in Efuse_GetCurrentSize() to reduce indentation
level and clear line over 80 characters checkpatch warnings.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200329100450.10126-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Fri, 27 Mar 2020 18:53:11 +0000 (19:53 +0100)]
staging: rtl8188eu: remove unnecessary parentheses
Remove all remaining unnecessary parentheses reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200327185311.16129-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>